| Tue, 16 Mar 2010 13:06:53 +0000 |
Tim Englich |
Modified the Workflow for Verticalprofiles and Timeseries on Meshes in that case that the Inputvalues of the Mapviewer-Interface take affect.
|
| Tue, 16 Mar 2010 13:02:56 +0000 |
Tim Englich |
Added an new State wich will handle the Display of Coordinatevalues and fetch given Inputparameters from the Presettings and copy them to the InputValues.
|
| Tue, 16 Mar 2010 12:55:58 +0000 |
Tim Englich |
Integrated handling of WKT-Strings for Points to extract Points from a given Inputstring.
|
| Tue, 16 Mar 2010 12:53:37 +0000 |
Tim Englich |
Improvement: Values of Type Geometry which are Points will be prepared as Regions for DB-Query.
|
| Tue, 16 Mar 2010 10:29:16 +0000 |
Ingo Weinzierl |
Changed the structure for parameter/measurement matrix in the describe document (issue199).
|
| Tue, 16 Mar 2010 08:51:50 +0000 |
Tim Englich |
Modified the Workflow of Product Layer for Contis and Nauthis that the Data that was sent by the Mapviewer-Interface take effect.
|
| Tue, 16 Mar 2010 08:50:13 +0000 |
Tim Englich |
Fixed NPE using the Presettings-Object without given Presettings.
|
| Mon, 15 Mar 2010 17:01:42 +0000 |
Tim Englich |
Modified the Workflow of Horizontalprofiles on Instantaneouspoints that the Data that was sent by the Mapviewer-Interface take effect.
|
| Mon, 15 Mar 2010 15:39:59 +0000 |
Ingo Weinzierl |
Changed source of displayed coordinate in 'HorizontalProfil'-charts' subtitle (issue120).
|
| Mon, 15 Mar 2010 15:26:26 +0000 |
Tim Englich |
Modified the Workflow of Verticalprofiles on TimeSeriespoints that the Data that was sent by the Mapviewer-Interface take effect.
|
| Mon, 15 Mar 2010 15:15:56 +0000 |
Tim Englich |
Modified the Workflow of TimeSeries on TimeSeriespoints that the Data that was sent by the Mapviewer-Interface take effect.
|
| Mon, 15 Mar 2010 13:49:50 +0000 |
Tim Englich |
Modified the Workflow of TimeSeries on Meshes that the Data that was sent by the Mapviewer-Interface
|
| Mon, 15 Mar 2010 13:40:14 +0000 |
Tim Englich |
Revoke Changes of r771 and override affected Methods in DefaultAutoResumeState
|
| Mon, 15 Mar 2010 12:50:08 +0000 |
Tim Englich |
Integrated the handling of AutoResumeStates into the initialization Process of an Artifact.
|
| Mon, 15 Mar 2010 12:39:35 +0000 |
Tim Englich |
Added Interface and Defaultimplementation for States which can be handled without any userinteraction.
|
| Mon, 15 Mar 2010 12:34:40 +0000 |
Tim Englich |
Fixed NPE will using StateBase without a given Query.
|
| Mon, 15 Mar 2010 12:30:53 +0000 |
Tim Englich |
Corrected C&P-Error in the Setup-Method of the PreSettingsTransferState
|
| Mon, 15 Mar 2010 12:28:49 +0000 |
Tim Englich |
Added Objecttype Geometry for the Validation of Inputdata.
|
| Mon, 15 Mar 2010 11:13:21 +0000 |
Ingo Weinzierl |
Implemented code for changing the title of a wms layer (issue198).
|
| Mon, 15 Mar 2010 09:23:56 +0000 |
Tim Englich |
Integrated lookup of the Geometry which was put to the Artifact during the Instantiation
|
| Fri, 12 Mar 2010 11:36:38 +0000 |
Tim Englich |
Put all Attributes of the Databasetables into the Shapefile which will be produced for the Product Layer
|
| Fri, 12 Mar 2010 11:28:36 +0000 |
Tim Englich |
Added generic Export for all Columns which are in an ResultValue.
|
| Wed, 10 Mar 2010 15:04:30 +0000 |
Ingo Weinzierl |
Use a better key - hash served by getHash() from StateBase - to put chart data into cache (issue201).
|
| Wed, 10 Mar 2010 13:27:14 +0000 |
Ingo Weinzierl |
Improved exception handling while feeding an artifact.
|
| Tue, 09 Mar 2010 12:54:05 +0000 |
Tim Englich |
Integrate lookup for MapFileTemplate for the different Layer.
|
| Tue, 09 Mar 2010 11:42:57 +0000 |
Tim Englich |
Integrated ExceptionHandling if no Data was found for the given Layer.
|
| Mon, 08 Mar 2010 15:15:08 +0000 |
Ingo Weinzierl |
Added an offset of five percent between values and chart border in vertical profile charts (issue186).
|
| Mon, 08 Mar 2010 14:04:28 +0000 |
Tim Englich |
Added WMS-Publishing to Product Layer
|
| Mon, 08 Mar 2010 10:51:01 +0000 |
Ingo Weinzierl |
Fixed broken titles in 'Profilschnitt'-charts (issue195).
|
| Mon, 08 Mar 2010 10:04:38 +0000 |
Ingo Weinzierl |
Changed insufficient key to store results used for chart generation in cache (issue189).
|
| Sat, 06 Mar 2010 08:25:14 +0000 |
Sascha L. Teichmann |
Cleanup imports
|
| Fri, 05 Mar 2010 16:07:09 +0000 |
Ingo Weinzierl |
Set ttl of artifacts to a better value in config.
|
| Fri, 05 Mar 2010 14:09:08 +0000 |
Ingo Weinzierl |
Added missing parameter name in describe document (issue185).
|
| Fri, 05 Mar 2010 12:35:24 +0000 |
Tim Englich |
Added Support for writing Shapefiles and Export them as an Zipfile for the Product Layer.
|
| Fri, 05 Mar 2010 09:13:17 +0000 |
Tim Englich |
ISSUE 191: Pdf, svg and png are now available.
|
| Thu, 04 Mar 2010 16:23:24 +0000 |
Ingo Weinzierl |
Added a configuration section for mapserver relevant stuff. Moved source to write meta files out to an own helper class named MetaWriter.
|
| Thu, 04 Mar 2010 14:06:26 +0000 |
Ingo Weinzierl |
Added some more templates for mapfile generation.
|
| Thu, 04 Mar 2010 09:18:53 +0000 |
Ingo Weinzierl |
Changed the way of calculating the total distance in 'Horizontalprofil'-charts (issue171).
|
| Thu, 04 Mar 2010 08:03:56 +0000 |
Ingo Weinzierl |
Added some more debug information while gap detection.
|
| Wed, 03 Mar 2010 16:26:19 +0000 |
Ingo Weinzierl |
Log important values used for gap detection if debug level is enabled.
|
| Wed, 03 Mar 2010 15:05:12 +0000 |
Ingo Weinzierl |
Removed workaround to send a fake document if statistic is requested for 'Horizontalschnitte' - no statistic available for this product type (issue146).
|
| Wed, 03 Mar 2010 13:44:15 +0000 |
Ingo Weinzierl |
Implementedr histogram pdf export.
|
| Tue, 02 Mar 2010 14:48:32 +0000 |
Ingo Weinzierl |
Implemented SVG export for histograms.
|
| Tue, 02 Mar 2010 08:43:50 +0000 |
Ingo Weinzierl |
Removed CallMeta object from state which should not be serialized. Implemented a little workarround instead to save localized strings for axes descriptions of horizontal profile charts (issue180).
|
| Mon, 01 Mar 2010 16:00:39 +0000 |
Ingo Weinzierl |
Display the selected value if there is no description avaible. WKT-strings will be displayed again (issue182).
|
| Mon, 01 Mar 2010 14:15:33 +0000 |
Ingo Weinzierl |
Take parent states only to describe static user interface part - not the current state itself.
|
| Mon, 01 Mar 2010 13:39:00 +0000 |
Ingo Weinzierl |
Removed useless methods after having refactored the caching mechanism.
|
| Fri, 26 Feb 2010 13:53:05 +0000 |
Ingo Weinzierl |
Improved the describe document so that we are able to render a measurement-parameter-matrix with these data.
|
