Wed, 28 Oct 2009 09:53:57 +0000 |
Tim Englich |
Added Configuration and Ressources for two new FIS. Current Meter and Ice Station Reports
|
Tue, 27 Oct 2009 16:16:49 +0000 |
Tim Englich |
Added two new FIS according to GT_0020.002
|
Tue, 27 Oct 2009 12:03:32 +0000 |
Tim Englich |
Integration of the selection of the min and max Layer used in Verticalprofiles of Meshes. issue61
|
Mon, 26 Oct 2009 15:56:47 +0000 |
Tim Englich |
Minimum and Maximum Depth should be entered by the User issue31
|
Mon, 26 Oct 2009 15:51:36 +0000 |
Tim Englich |
Minimum and Maximum Depth should be entered by the User issue31
|
Fri, 23 Oct 2009 14:29:50 +0000 |
Tim Englich |
The Timeperiod of the Modeldata has changed. so it was nessessarry to change
|
Fri, 23 Oct 2009 14:28:07 +0000 |
Tim Englich |
gnv-artifacts/trunk@265 c6561f87-3c4e-4783-a992-168aeb5c3f6f
|
Fri, 23 Oct 2009 14:26:45 +0000 |
Tim Englich |
Use super.identifier as uuid. issue3
|
Fri, 23 Oct 2009 08:50:50 +0000 |
Tim Englich |
Store the Results of an Artifact not in the Artifact but in an ehcache instance. issue3
|
Fri, 23 Oct 2009 07:37:39 +0000 |
Tim Englich |
Optimized Query horizontalprofile_instantaneouspoint_cruise because it is not warranted
|
Thu, 22 Oct 2009 14:02:30 +0000 |
Tim Englich |
Added the support to Display the Time and the position of an Measurement in an VerticalProfile of Type Instantaneous Point
|
Thu, 22 Oct 2009 08:50:21 +0000 |
Tim Englich |
Split the Configuration File in several small Documents to speed up the Artifactinstantiation and also make the administration of the Artifactdatabase easier. issue40 and issue59
|
Wed, 21 Oct 2009 11:10:28 +0000 |
Tim Englich |
Added relative locations for further required Configurationfiles . issue59
|
Wed, 21 Oct 2009 10:36:38 +0000 |
Tim Englich |
Added separat ConnectionPoolPrperties to this Project.
|
Wed, 21 Oct 2009 10:27:30 +0000 |
Tim Englich |
Changed Configuration Folder to doc/conf
|
Wed, 21 Oct 2009 10:09:53 +0000 |
Tim Englich |
Added Folder for the Configuration of the gnv-artifacts.
|
Tue, 20 Oct 2009 13:32:05 +0000 |
Tim Englich |
Added the required Classes an Configuration for providing VerticalCrossSections
|
Mon, 19 Oct 2009 13:33:36 +0000 |
Tim Englich |
Added uniform Visualization of Single Input-Elements to MinMax-Elements. issue55
|
Mon, 19 Oct 2009 12:18:08 +0000 |
Tim Englich |
Catch Exception that the Calling Program could not put no InputData
|
Mon, 19 Oct 2009 12:06:48 +0000 |
Tim Englich |
Adding empty Series into Chart to prevent NPE issue 19
|
Mon, 19 Oct 2009 10:25:54 +0000 |
Tim Englich |
Correct misspelled Exception-Message as an Result of fixing issue35
|
Mon, 19 Oct 2009 09:40:31 +0000 |
Tim Englich |
Changed the Value of Layer and Depth range visualization of Meshes
|
Mon, 19 Oct 2009 09:18:40 +0000 |
Tim Englich |
Changed the displayed-Values as defined in issue47
|
Fri, 16 Oct 2009 15:26:22 +0000 |
Tim Englich |
Conformation to the tanslation of the MeshObjects issue53
|
Fri, 16 Oct 2009 14:51:43 +0000 |
Tim Englich |
Adding two further fis which are based on Mesh to the System.
|
Fri, 16 Oct 2009 13:05:40 +0000 |
Tim Englich |
Adding 5% bigger Valuearea to the Chart according to GT0030.011
|
Fri, 16 Oct 2009 12:39:18 +0000 |
Tim Englich |
Changed Domainlable for Verticalprofiles according to the Specification GT_0030.005
|
Fri, 16 Oct 2009 12:37:00 +0000 |
Tim Englich |
Added Calculation of the Distance in the unit km for Geodetic-Coordinates according to the Specification GT_0030.004
|
Fri, 16 Oct 2009 09:31:25 +0000 |
Tim Englich |
The Levelnumber of Meshes will also be visualized in the choose of depth GT_0020.0020
|
Fri, 16 Oct 2009 08:44:09 +0000 |
Tim Englich |
Added Coordinate-Values to Title of the TimeseriesDiagramm for Meshes
|
Fri, 16 Oct 2009 08:17:21 +0000 |
Tim Englich |
Bugfix ChartValues were not Recalculated after feed was called second Time.
|
Fri, 16 Oct 2009 08:09:31 +0000 |
Tim Englich |
Bugfix in MinMaxTransition the Maxvalue was not the correct Value.
|
Fri, 16 Oct 2009 08:01:47 +0000 |
Tim Englich |
Added Transformation from WKT-Coordinate Reperesentation to BSH-Coordinate Representation. issue38
|
Thu, 15 Oct 2009 15:38:15 +0000 |
Tim Englich |
Added missing Class Description Values to the Horizontal Profile Charts
|
Thu, 15 Oct 2009 14:19:40 +0000 |
Tim Englich |
Added Name of FIS to the Title of Charts
|
Thu, 15 Oct 2009 12:43:46 +0000 |
Tim Englich |
Integrated special CSV-Export for HorizontalProfiles
|
Wed, 14 Oct 2009 10:49:35 +0000 |
Tim Englich |
Add Spatial-Query-Syntax to HorizontalProfile-Queries and use Geometry to Calculate the X-Ordinate of the Chart.
|
Tue, 13 Oct 2009 10:30:01 +0000 |
Tim Englich |
Added Parameter-Usage in Time-Interval-Query ISSUE-33
|
Tue, 13 Oct 2009 10:17:46 +0000 |
Tim Englich |
Added real Coordinate-Query to HorizontalProfile- and VerticalProfile-Mesh
|
Tue, 13 Oct 2009 09:11:23 +0000 |
Tim Englich |
Added real Coordinate-Query to TimeSeries-Mesh
|
Mon, 12 Oct 2009 09:19:16 +0000 |
Sascha L. Teichmann |
Closed small file descriptor leak in loading SQL properties file.
|
Fri, 09 Oct 2009 07:54:48 +0000 |
Tim Englich |
Format Code to max 80 Chars per Row and Cleanup
|
Fri, 09 Oct 2009 07:49:47 +0000 |
Tim Englich |
Added parameter to the DateQueroes of Meshes
|
Wed, 07 Oct 2009 13:29:15 +0000 |
Sascha L. Teichmann |
RELEASE 0.1
|
Tue, 06 Oct 2009 14:53:59 +0000 |
Tim Englich |
Switch Lable-Value for Domain-Axis.
|
Tue, 06 Oct 2009 13:51:28 +0000 |
Tim Englich |
Added some missing RessourceValues
|
Tue, 06 Oct 2009 12:30:13 +0000 |
Sascha L. Teichmann |
s@test/plain@text/plain@g to correct MIME type of CSV export
|
Tue, 06 Oct 2009 11:04:52 +0000 |
Sascha L. Teichmann |
Move resources to a place where maven puts them into final package.
|