| Mon, 15 Mar 2010 09:23:56 +0000 |
Tim Englich |
Integrated lookup of the Geometry which was put to the Artifact during the Instantiation
|
| Fri, 12 Mar 2010 11:36:38 +0000 |
Tim Englich |
Put all Attributes of the Databasetables into the Shapefile which will be produced for the Product Layer
|
| Fri, 12 Mar 2010 11:28:36 +0000 |
Tim Englich |
Added generic Export for all Columns which are in an ResultValue.
|
| Wed, 10 Mar 2010 15:04:30 +0000 |
Ingo Weinzierl |
Use a better key - hash served by getHash() from StateBase - to put chart data into cache (issue201).
|
| Wed, 10 Mar 2010 13:27:14 +0000 |
Ingo Weinzierl |
Improved exception handling while feeding an artifact.
|
| Tue, 09 Mar 2010 12:54:05 +0000 |
Tim Englich |
Integrate lookup for MapFileTemplate for the different Layer.
|
| Tue, 09 Mar 2010 11:42:57 +0000 |
Tim Englich |
Integrated ExceptionHandling if no Data was found for the given Layer.
|
| Mon, 08 Mar 2010 15:15:08 +0000 |
Ingo Weinzierl |
Added an offset of five percent between values and chart border in vertical profile charts (issue186).
|
| Mon, 08 Mar 2010 14:04:28 +0000 |
Tim Englich |
Added WMS-Publishing to Product Layer
|
| Mon, 08 Mar 2010 10:51:01 +0000 |
Ingo Weinzierl |
Fixed broken titles in 'Profilschnitt'-charts (issue195).
|
| Mon, 08 Mar 2010 10:04:38 +0000 |
Ingo Weinzierl |
Changed insufficient key to store results used for chart generation in cache (issue189).
|
| Sat, 06 Mar 2010 08:25:14 +0000 |
Sascha L. Teichmann |
Cleanup imports
|
| Fri, 05 Mar 2010 16:07:09 +0000 |
Ingo Weinzierl |
Set ttl of artifacts to a better value in config.
|
| Fri, 05 Mar 2010 14:09:08 +0000 |
Ingo Weinzierl |
Added missing parameter name in describe document (issue185).
|
| Fri, 05 Mar 2010 12:35:24 +0000 |
Tim Englich |
Added Support for writing Shapefiles and Export them as an Zipfile for the Product Layer.
|
| Fri, 05 Mar 2010 09:13:17 +0000 |
Tim Englich |
ISSUE 191: Pdf, svg and png are now available.
|
| Thu, 04 Mar 2010 16:23:24 +0000 |
Ingo Weinzierl |
Added a configuration section for mapserver relevant stuff. Moved source to write meta files out to an own helper class named MetaWriter.
|
| Thu, 04 Mar 2010 14:06:26 +0000 |
Ingo Weinzierl |
Added some more templates for mapfile generation.
|
| Thu, 04 Mar 2010 09:18:53 +0000 |
Ingo Weinzierl |
Changed the way of calculating the total distance in 'Horizontalprofil'-charts (issue171).
|
| Thu, 04 Mar 2010 08:03:56 +0000 |
Ingo Weinzierl |
Added some more debug information while gap detection.
|
| Wed, 03 Mar 2010 16:26:19 +0000 |
Ingo Weinzierl |
Log important values used for gap detection if debug level is enabled.
|
| Wed, 03 Mar 2010 15:05:12 +0000 |
Ingo Weinzierl |
Removed workaround to send a fake document if statistic is requested for 'Horizontalschnitte' - no statistic available for this product type (issue146).
|
| Wed, 03 Mar 2010 13:44:15 +0000 |
Ingo Weinzierl |
Implementedr histogram pdf export.
|
| Tue, 02 Mar 2010 14:48:32 +0000 |
Ingo Weinzierl |
Implemented SVG export for histograms.
|
| Tue, 02 Mar 2010 08:43:50 +0000 |
Ingo Weinzierl |
Removed CallMeta object from state which should not be serialized. Implemented a little workarround instead to save localized strings for axes descriptions of horizontal profile charts (issue180).
|
| Mon, 01 Mar 2010 16:00:39 +0000 |
Ingo Weinzierl |
Display the selected value if there is no description avaible. WKT-strings will be displayed again (issue182).
|
| Mon, 01 Mar 2010 14:15:33 +0000 |
Ingo Weinzierl |
Take parent states only to describe static user interface part - not the current state itself.
|
| Mon, 01 Mar 2010 13:39:00 +0000 |
Ingo Weinzierl |
Removed useless methods after having refactored the caching mechanism.
|
| Fri, 26 Feb 2010 13:53:05 +0000 |
Ingo Weinzierl |
Improved the describe document so that we are able to render a measurement-parameter-matrix with these data.
|
| Thu, 25 Feb 2010 09:11:56 +0000 |
Ingo Weinzierl |
Adapted product configuration regarding the changes in rev704.
|
| Thu, 25 Feb 2010 09:06:36 +0000 |
Ingo Weinzierl |
'Profilschnitte' are working without cache as well, now.
|
| Thu, 25 Feb 2010 07:25:21 +0000 |
Ingo Weinzierl |
Changed cache initialization so that we can use GNV without using a cache.
|
| Wed, 24 Feb 2010 14:30:52 +0000 |
Ingo Weinzierl |
Implemented logic to adjust number of bins corresponding to user input.
|
| Tue, 23 Feb 2010 15:33:10 +0000 |
Ingo Weinzierl |
Removed a bug in pdf and svg creation.
|
| Tue, 23 Feb 2010 11:47:08 +0000 |
Ingo Weinzierl |
Split up export modes from output modes.
|
| Mon, 22 Feb 2010 11:29:34 +0000 |
Ingo Weinzierl |
Restructured configuration, removed duplicated entry and store config information in MapfileGenerator to avoid reading config file every time while updating mapfile.
|
| Mon, 22 Feb 2010 10:43:25 +0000 |
Ingo Weinzierl |
Improved velocity configuration.
|
| Sun, 21 Feb 2010 21:05:55 +0000 |
Sascha L. Teichmann |
Fixed file handle leak when writing meta data.
|
| Fri, 19 Feb 2010 13:28:34 +0000 |
Ingo Weinzierl |
Implemented method stubs of MapfileGenerator. Mapfiles are successfully created corresponding meta.xml files.
|
| Wed, 17 Feb 2010 09:40:15 +0000 |
Ingo Weinzierl |
Added MapfileGenerator stub and MapfileGenerator calls after writing and removing shapefiles.
|
| Mon, 15 Feb 2010 11:58:47 +0000 |
Ingo Weinzierl |
Added histogram as output mode in configuration files.
|
| Mon, 15 Feb 2010 11:44:01 +0000 |
Ingo Weinzierl |
Added new ouput mode: histogram.
|
| Fri, 12 Feb 2010 18:04:58 +0000 |
Tim Englich |
Added the Configuration and the Classes for the new Product Layer.
|
| Fri, 12 Feb 2010 15:36:05 +0000 |
Ingo Weinzierl |
Repaired multi parameter selection.
|
| Fri, 12 Feb 2010 11:16:37 +0000 |
Ingo Weinzierl |
Repaired broken step-back-history.
|
| Fri, 12 Feb 2010 09:17:21 +0000 |
Tim Englich |
Modified first Configuration of a Product that it skip States if a geometry was inserted into the PreSettings.
|
| Fri, 12 Feb 2010 09:11:49 +0000 |
Tim Englich |
Added new Transition and State for using the PreSettingsValue for the decision if a Transition could be used
|
| Thu, 11 Feb 2010 14:10:15 +0000 |
Ingo Weinzierl |
Repaired chart creation.
|
| Thu, 11 Feb 2010 11:58:39 +0000 |
Ingo Weinzierl |
Changed the mechanism for searching for specific parameter collections.
|
| Thu, 11 Feb 2010 08:54:58 +0000 |
Ingo Weinzierl |
Improved hash creation in each state.
|
| Wed, 10 Feb 2010 15:35:26 +0000 |
Ingo Weinzierl |
Added descriptions to the selected input data and use them for rendering the GUI.
|
| Wed, 10 Feb 2010 11:43:35 +0000 |
Ingo Weinzierl |
Parted the cache blob into pieces and changed the way how user input is stored on each state.
|
| Tue, 09 Feb 2010 15:23:07 +0000 |
Tim Englich |
Added the support of the usecase that one FIS can be identified by different MapServices. In that case the parameters will be merged into the existing FIS.
|
| Tue, 09 Feb 2010 14:27:55 +0000 |
Ingo Weinzierl |
First step of removing the cache blob. The static part of the describe document will be created by using the input data stored at each state. Some TODOs left (see ChangeLog).
|
| Tue, 09 Feb 2010 13:01:20 +0000 |
Tim Englich |
Integrated Database-Support for the Mapviewer-Interface
|
| Fri, 05 Feb 2010 14:15:09 +0000 |
Ingo Weinzierl |
Changed log4j version to 1.2.14
|
| Fri, 05 Feb 2010 12:00:04 +0000 |
Tim Englich |
Changed from ArcSDE Version 9.2.5 to Version 9.3
|
| Fri, 05 Feb 2010 10:36:46 +0000 |
Tim Englich |
Changes id_layer of Table layerhasparameter from literal to number.
|
| Fri, 05 Feb 2010 09:58:50 +0000 |
Tim Englich |
ISSUE167
|
| Tue, 02 Feb 2010 13:13:45 +0000 |
Tim Englich |
Added the usage of the Presettings in the States which are handling the choice of Parameter
|
| Tue, 02 Feb 2010 13:12:11 +0000 |
Tim Englich |
Added the possibility to use the data which are send using the MapServer-Interface during the Workflow of the GNV-Artifacts.
|
| Mon, 01 Feb 2010 14:52:05 +0000 |
Tim Englich |
Added the Implementation of the MetaDataService which will deliver FIS and Parameters that match to Mapservices, Region and Layers that were sent to the Service.
|
| Mon, 01 Feb 2010 14:20:11 +0000 |
Tim Englich |
Remove some Structure-Errors from the ChangeLog
|
| Mon, 01 Feb 2010 14:14:19 +0000 |
Tim Englich |
Compilance-Errors triggered by Interface-Modifications in the Artifact-Module.
|
| Mon, 01 Feb 2010 14:03:01 +0000 |
Tim Englich |
Changed Method signatures because of Interfacemodifications in the Artifact-Module
|
| Sun, 31 Jan 2010 21:50:15 +0000 |
Sascha L. Teichmann |
Added experimental support for extrapolation in "Horizontalschnitte"
|
| Fri, 29 Jan 2010 13:19:34 +0000 |
Tim Englich |
Fixed the broken JUnittests.
|
| Wed, 27 Jan 2010 15:03:16 +0000 |
Sascha L. Teichmann |
Reordered items in Changes a bit.
|
| Wed, 27 Jan 2010 14:38:27 +0000 |
Hans Plum |
Summarized Changes and NEWS for Release 0.4
|
| Wed, 27 Jan 2010 10:01:37 +0000 |
Ingo Weinzierl |
Solved issue 164 - applied patch of msg 763. Remove directories and shape files of out-dated artifacts.
|
| Tue, 26 Jan 2010 18:32:12 +0000 |
Ingo Weinzierl |
Calculate results and put them into cache when reaching the output state - avoids latencies.
|
| Tue, 26 Jan 2010 17:52:10 +0000 |
Ingo Weinzierl |
Solved issue158. Added labels to 'Profilschnitte'.
|
| Tue, 26 Jan 2010 14:19:59 +0000 |
Ingo Weinzierl |
Set white border for 'Profilschnitte' as default.
|
| Tue, 26 Jan 2010 12:00:20 +0000 |
Ingo Weinzierl |
Calculate results after reaching the output state and store them in cache.
|
| Tue, 26 Jan 2010 10:46:33 +0000 |
Ingo Weinzierl |
Splitted date selection of product 'Horizontalschnitt' into two steps.
|
| Tue, 26 Jan 2010 10:16:00 +0000 |
Ingo Weinzierl |
Removed csv export from product 'Profilschnitt'.
|
| Tue, 26 Jan 2010 10:07:44 +0000 |
Ingo Weinzierl |
Fixed an ArrayIndexOutOfBounds-exceptions which occured if there are less than two data points for chart creation.
|
| Mon, 25 Jan 2010 18:25:19 +0000 |
Sascha L. Teichmann |
Fixed issue gnv/issue159
|
| Mon, 25 Jan 2010 17:06:01 +0000 |
Ingo Weinzierl |
Fixed issue157: Verticalcrosssection charts have a white background as all other chart types have.
|
| Mon, 25 Jan 2010 16:15:31 +0000 |
Ingo Weinzierl |
Copied method from JFreeChart to adapt date formats.
|
| Mon, 25 Jan 2010 13:48:52 +0000 |
Sascha L. Teichmann |
Set serverRoundtripInterval to 5 seconds and serverInactiveInterval to 5 minutes.
|
| Mon, 25 Jan 2010 11:40:05 +0000 |
Ingo Weinzierl |
Splitted data selection into two parts. Removed option to disable/enable data points in charts and exports.
|
| Mon, 25 Jan 2010 11:04:52 +0000 |
Ingo Weinzierl |
Splitted date selection of horizontal profile charts into two parts - selection of a year and selection of a concrete date of this year.
|
| Mon, 25 Jan 2010 09:18:31 +0000 |
Ingo Weinzierl |
Issue 156 solved. Added width, height and points as parameter to svg and pdf output mode. Width and height have an effact on the width and height of the export, points is a boolean property which enables/disables the drawing of data points.
|
| Sun, 24 Jan 2010 20:24:03 +0000 |
Sascha L. Teichmann |
Generate seabed polygon to "Profilschnitte".
|
| Sun, 24 Jan 2010 12:10:50 +0000 |
Sascha L. Teichmann |
Cosmetic cleanups on palette -> QQIS style transformation.
|
| Sat, 23 Jan 2010 21:16:45 +0000 |
Sascha L. Teichmann |
Last part to fix gnv/issue153. Now 'Profilschnitte', 'Horizontalschnitte' and 'horizontale Schnittprofile'
|
| Sat, 23 Jan 2010 18:10:34 +0000 |
Sascha L. Teichmann |
Try to cull points from set of input points when generating "Profilschnitte".
|
| Sat, 23 Jan 2010 17:42:04 +0000 |
Sascha L. Teichmann |
If the number of data points to generate a "Horizontalschnitt"
|
| Sat, 23 Jan 2010 14:03:26 +0000 |
Sascha L. Teichmann |
Added little XSL tranformation to turn palette XML files into QGIS style definitions.
|
| Fri, 22 Jan 2010 18:51:47 +0000 |
Sascha L. Teichmann |
Fixed "Profilschnitte" for gnv/issue153.
|
| Fri, 22 Jan 2010 18:22:11 +0000 |
Sascha L. Teichmann |
Fixed gnv/issue153
|
| Fri, 22 Jan 2010 15:45:59 +0000 |
Ingo Weinzierl |
Removed debug output which has been checked in by mistake.
|
| Fri, 22 Jan 2010 13:04:16 +0000 |
Tim Englich |
Added Description of the sense of the different Attributes of the Configurationfile meshwidth.xml.
|
| Fri, 22 Jan 2010 12:48:16 +0000 |
Tim Englich |
Make the mean with of an Mesh configurable issue93
|
| Fri, 22 Jan 2010 10:32:49 +0000 |
Tim Englich |
Fixed Compiler-Error after adding further Methods to the Interface ArtifactDatabase.
|
| Fri, 22 Jan 2010 08:13:39 +0000 |
Tim Englich |
Fixed Compiler-Error in JUnit-Test for ShapefileExport after changes in the Method-Signature.
|
| Thu, 21 Jan 2010 16:08:08 +0000 |
Ingo Weinzierl |
Removed never try-catch of a never thrown exception.
|
| Thu, 21 Jan 2010 14:42:51 +0000 |
Ingo Weinzierl |
Solved some issues. Removed encoding problems while formatting coordinates (issue137) and use this format as subtitle in charts (issue136).
|
| Thu, 21 Jan 2010 10:09:01 +0000 |
Ingo Weinzierl |
Solved issue100. Improved axes range. Scale dataset to its own axis.
|
| Wed, 20 Jan 2010 17:54:48 +0000 |
Ingo Weinzierl |
Solved issue152. Time intervals of timeseries axis are defined by JFreeChart automatically.
|
| Wed, 20 Jan 2010 16:05:52 +0000 |
Sascha L. Teichmann |
Trigger the calculation of the "Horizontalschnitt" when the output state is initialized.
|
| Wed, 20 Jan 2010 15:48:31 +0000 |
Ingo Weinzierl |
Solved issue 129. Renamed i and j axis to 'West-East-Axis' and 'North-South-Axis'.
|
| Wed, 20 Jan 2010 15:17:35 +0000 |
Ingo Weinzierl |
Fixed issue105. Added option to enable/disable data points in charts. Parse this option while creating charts.
|
| Wed, 20 Jan 2010 14:47:30 +0000 |
Sascha L. Teichmann |
Speed up the "Horizontalschnitte"
|
| Wed, 20 Jan 2010 08:50:10 +0000 |
Ingo Weinzierl |
Fixed some bugs in configuration regarding description and mimetype of svg exports.
|
| Tue, 19 Jan 2010 23:01:24 +0000 |
Sascha L. Teichmann |
Clip "Horizontalschnitte" against given clipping polygon.
|
| Tue, 19 Jan 2010 21:23:28 +0000 |
Sascha L. Teichmann |
Upgraded to Geotools 2.5.8. Write polygons and line strings to
|
| Tue, 19 Jan 2010 17:55:08 +0000 |
Sascha L. Teichmann |
Fixed import error.
|
| Tue, 19 Jan 2010 16:47:25 +0000 |
Ingo Weinzierl |
Issue142. Paid attention on array length. Parameters without values resulted in ArrayIndexOutOfBoundsExceptions.
|
| Tue, 19 Jan 2010 14:06:10 +0000 |
Sascha L. Teichmann |
Generate JTS geometries of "Horizontalschnitte" correctly.
|
| Tue, 19 Jan 2010 12:45:51 +0000 |
Tim Englich |
Do some Bugfixes after testing the Schema and Testdata against an Oracle 10.2 DBMS.
|
| Tue, 19 Jan 2010 10:58:46 +0000 |
Ingo Weinzierl |
Changed some method signatures of the State interface. Use CallContext objects instead of CallMeta objects which are a subset of CallContext.
|
| Tue, 19 Jan 2010 10:06:03 +0000 |
Ingo Weinzierl |
Added labels and titles to 'Profilschnitt' charts.
|
| Mon, 18 Jan 2010 15:49:12 +0000 |
Ingo Weinzierl |
Mark the fis select node with an attribute 'fis', which is important for the XSL sheet to create a link to step back to this point.
|
| Mon, 18 Jan 2010 15:14:22 +0000 |
Tim Englich |
Added Comments and further Informations to the external Interface Schema
|
| Mon, 18 Jan 2010 14:17:25 +0000 |
Tim Englich |
Added Database-Schema and Testdata for the MapViewer-Interface
|
| Mon, 18 Jan 2010 13:43:50 +0000 |
Ingo Weinzierl |
Appended the selected fis to the describe document.
|
| Mon, 18 Jan 2010 11:40:41 +0000 |
Sascha L. Teichmann |
Fixed indention of ChangeLog
|
| Mon, 18 Jan 2010 11:32:23 +0000 |
Tim Englich |
Fixed Unittest for HorizontalCrossSections.
|
| Mon, 18 Jan 2010 11:26:51 +0000 |
Tim Englich |
Fixed Compilation and Runtimeerrors in Unittests.
|
| Mon, 18 Jan 2010 11:25:52 +0000 |
Sascha L. Teichmann |
Generate JTS geometries (multi polygons and multi linestrings) from
|
| Mon, 18 Jan 2010 10:56:41 +0000 |
Sascha L. Teichmann |
Added explicit index scheme to palette classes to allow external references.
|
| Sun, 17 Jan 2010 21:26:21 +0000 |
Sascha L. Teichmann |
Fixed some bugs with calculating "Horizontalschnitte".
|
| Sun, 17 Jan 2010 16:34:11 +0000 |
Sascha L. Teichmann |
Added end of life support for artifact states. Implemented ZIP download
|
| Sun, 17 Jan 2010 12:22:56 +0000 |
Sascha L. Teichmann |
Rebased "Horizonalschnitte" to own state class to break from the not
|
| Fri, 15 Jan 2010 20:39:30 +0000 |
Sascha L. Teichmann |
Cleaned up imports
|
| Fri, 15 Jan 2010 18:21:49 +0000 |
Ingo Weinzierl |
Added support to step back to the point for choosing a product.
|
| Fri, 15 Jan 2010 10:13:18 +0000 |
Tim Englich |
Added the Configurationproperty serverRoundtripInterval to the Configuration of the Connectionpool.
|
| Fri, 15 Jan 2010 09:54:51 +0000 |
Tim Englich |
Added new Step for querying the Years where measurements has been done into the TestCase.
|
| Thu, 14 Jan 2010 11:07:27 +0000 |
Ingo Weinzierl |
Renamed FISSelectArtifact to SelectProductArtifact which fits better, because the intent of this artifact is to choose a product - not a fis.
|
| Thu, 14 Jan 2010 10:34:05 +0000 |
Sascha L. Teichmann |
Added area interpolation needed for "Horizontalschnitt"
|
| Wed, 13 Jan 2010 23:10:56 +0000 |
Ingo Weinzierl |
Added support to step back to previous states. Add state names to xform nodes in describe document and append old targets to list of reachable targets.
|
| Wed, 13 Jan 2010 18:58:26 +0000 |
Sascha L. Teichmann |
Added configuration of directory of "Horizontalschnitt" shape files.
|
| Tue, 12 Jan 2010 17:41:59 +0000 |
Sascha L. Teichmann |
Some minor code cleanup
|
| Tue, 12 Jan 2010 15:25:32 +0000 |
Ingo Weinzierl |
Added mechanism for advancing to previous states.
|
| Tue, 12 Jan 2010 12:42:53 +0000 |
Tim Englich |
Added a new State in Product Verticalprofile in Timeseriespoints.
|
| Tue, 12 Jan 2010 11:34:25 +0000 |
Tim Englich |
Added ij-Index determination for horizontal-cross-sections.
|
| Tue, 12 Jan 2010 08:49:51 +0000 |
Ingo Weinzierl |
Use XMLUtils to evaluate xpath expressions instead of using Config class. Adapted xpath (namespace and prefix).
|
| Mon, 11 Jan 2010 15:26:24 +0000 |
Tim Englich |
Set NameSpaceAware to true to get the Unittests work again.
|
| Mon, 11 Jan 2010 00:29:45 +0000 |
Sascha L. Teichmann |
Added support to trace rasters to JTS multi polygons and multi line strings.
|
| Sat, 09 Jan 2010 17:55:45 +0000 |
Ingo Weinzierl |
Next step of changing the concept how to use the user interface. Adapted namespaces and replaced FISArtifact with a ProxyArtifact.
|
| Sat, 09 Jan 2010 16:58:53 +0000 |
Sascha L. Teichmann |
Make ground interpolation for vertical cross section configurable.
|
| Sat, 09 Jan 2010 12:45:42 +0000 |
Sascha L. Teichmann |
Use new raster access.
|
| Fri, 08 Jan 2010 14:27:49 +0000 |
Tim Englich |
Removed Encodingerrors from listed Files. All Files are now UTF-8 compliant.
|
| Fri, 08 Jan 2010 13:04:29 +0000 |
Tim Englich |
Modified Testcases that they work using the ARCSDE 9.2
|
| Fri, 08 Jan 2010 10:01:35 +0000 |
Tim Englich |
Added the possibility to enter a Polygon represented by an WKT into the Workflow of the HorizontalCrossSections
|
| Wed, 06 Jan 2010 10:09:51 +0000 |
Sascha L. Teichmann |
Improved raster tile based height evaluation.
|
| Tue, 05 Jan 2010 14:12:03 +0000 |
Tim Englich |
Added RasterObject for caching the Rastertiles to get a better performance.
|
| Mon, 04 Jan 2010 15:41:29 +0000 |
Ingo Weinzierl |
Splitted code pathes of dynamic and static nodes. Static nodes contain the selected value only instead of transfering the whole stack of options again.
|
| Mon, 04 Jan 2010 15:27:33 +0000 |
Tim Englich |
Added Rasterdatasupport to VerticalCrossSections
|
| Mon, 04 Jan 2010 15:20:14 +0000 |
Sascha L. Teichmann |
Refactored statistics classes a bit. Added class for vertical cross sections.
|
| Mon, 04 Jan 2010 13:42:49 +0000 |
Sascha L. Teichmann |
vertical cross section: Fixed problem with running to max depth on every column in interpolation.
|
| Mon, 04 Jan 2010 13:14:27 +0000 |
Sascha L. Teichmann |
Enable PDF export of vertical cross section charts.
|
| Mon, 04 Jan 2010 12:42:16 +0000 |
Sascha L. Teichmann |
Use JFreeCharts ValueAxis.valueToJava2D() to transform data values
|
| Mon, 04 Jan 2010 02:49:42 +0000 |
Sascha L. Teichmann |
Render labels in vertical cross section charts.
|
| Sun, 03 Jan 2010 15:57:02 +0000 |
Sascha L. Teichmann |
Add only color to scale of vertical cross section which are in the chart.
|
| Sun, 03 Jan 2010 12:16:55 +0000 |
Sascha L. Teichmann |
Generate iso line classes according gnv-issues/issue108
|
| Fri, 01 Jan 2010 21:52:41 +0000 |
Sascha L. Teichmann |
Improved generation of iso lines in vertical cross section.
|
| Fri, 01 Jan 2010 12:08:05 +0000 |
Sascha L. Teichmann |
Connected vertical cross section with chart generation.
|
| Wed, 30 Dec 2009 23:02:10 +0000 |
Sascha L. Teichmann |
Fixed some bugs and create "Profilschnitt" polygons via configuration.
|
| Wed, 30 Dec 2009 10:35:19 +0000 |
Sascha L. Teichmann |
Added configuration for vertical cross sections ("Profilschnitte")
|
| Tue, 29 Dec 2009 14:54:17 +0000 |
Sascha L. Teichmann |
"horizontale Schnittprofile" are now configured via conf.xml
|
| Tue, 29 Dec 2009 10:09:26 +0000 |
Sascha L. Teichmann |
Create a new 'gnv' section in config file.
|
| Tue, 29 Dec 2009 06:53:31 +0000 |
Sascha L. Teichmann |
Added raster filter framework for "Profilschnitte"
|
| Mon, 28 Dec 2009 17:13:12 +0000 |
Sascha L. Teichmann |
Cleaned up messy code a bit in "Horizontales Schnittprofil" and "Profilschnitt".
|
| Mon, 28 Dec 2009 16:24:05 +0000 |
Sascha L. Teichmann |
Loop through configuration to chart generation.
|
| Mon, 28 Dec 2009 11:50:27 +0000 |
Sascha L. Teichmann |
Added manager to handle several levels of palette subdivsions.
|
| Sun, 27 Dec 2009 05:25:40 +0000 |
Sascha L. Teichmann |
Added vectorizer rings callback to generate iso lines.
|
| Sat, 26 Dec 2009 15:32:08 +0000 |
Sascha L. Teichmann |
Added vectorizer rings callback which generates polygon datasets suitable
|
| Fri, 25 Dec 2009 12:00:14 +0000 |
Sascha L. Teichmann |
Added code to split palette interval into equal sized parts.
|
| Wed, 23 Dec 2009 15:28:40 +0000 |
Sascha L. Teichmann |
Implemented the raster interpolation for the 'Profilschnitt'.
|
| Wed, 23 Dec 2009 12:20:25 +0000 |
Sascha L. Teichmann |
Added interpolation capabilities along z axis to XYColumns.
|
| Wed, 23 Dec 2009 09:45:40 +0000 |
Sascha L. Teichmann |
Added some type safety. Fixed z value bug in reading database preprocessing. Only dissemble WKT points if really needed.
|
| Wed, 23 Dec 2009 06:53:46 +0000 |
Sascha L. Teichmann |
Refactored the XYColumn and Point2d code a bit to be more reusable in 3D.
|
| Tue, 22 Dec 2009 20:45:45 +0000 |
Sascha L. Teichmann |
Load salinity palette correctly.
|
| Tue, 22 Dec 2009 17:19:10 +0000 |
Ingo Weinzierl |
Finished preprocessing data for interpolation in verticalcrosssection charts.ß
|
| Tue, 22 Dec 2009 13:18:07 +0000 |
Ingo Weinzierl |
Adjusted sql queries and configuration for verticalcrosssection products. Some code refactoring and improved error handling.
|
| Tue, 22 Dec 2009 13:10:56 +0000 |
Ingo Weinzierl |
Added data model classes to store information for interpolation.
|
| Tue, 22 Dec 2009 10:34:15 +0000 |
Sascha L. Teichmann |
Load palettes from configuration.
|
| Mon, 21 Dec 2009 19:58:17 +0000 |
Sascha L. Teichmann |
Horizontale Schnittprofile. Ignore invalid interpolation correctly.
|
| Mon, 21 Dec 2009 18:00:54 +0000 |
Sascha L. Teichmann |
Added support for converting 2D rasters into polygons.
|
| Mon, 21 Dec 2009 17:03:10 +0000 |
Ingo Weinzierl |
Moved some methods back to old place.
|
| Mon, 21 Dec 2009 16:47:45 +0000 |
Sascha L. Teichmann |
Added Ingo Weinzierl's special JFreeChart classes.
|
| Mon, 21 Dec 2009 16:01:35 +0000 |
Ingo Weinzierl |
Prepared state and transitions of verticalcrosssection.
|
| Mon, 21 Dec 2009 15:57:04 +0000 |
Ingo Weinzierl |
Outsourcing of some methods for preparing results for chart creation.
|
| Mon, 21 Dec 2009 15:28:33 +0000 |
Sascha L. Teichmann |
Added color palettes for several parameters.
|
| Mon, 21 Dec 2009 14:41:18 +0000 |
Sascha L. Teichmann |
Horizontales Schnittprofil:
|
| Mon, 21 Dec 2009 13:55:42 +0000 |
Ingo Weinzierl |
Removed warning, which told the user that no gap detection is implemented for horizontalcrossprofile charts.
|
| Mon, 21 Dec 2009 13:49:49 +0000 |
Ingo Weinzierl |
Added support of gap detection in horizontalcrossprofile charts.
|
| Thu, 17 Dec 2009 18:56:03 +0000 |
Sascha L. Teichmann |
Release 0.3
|
| Thu, 17 Dec 2009 18:05:23 +0000 |
Sascha L. Teichmann |
Bind REST server to localhost.
|
| Thu, 17 Dec 2009 16:57:05 +0000 |
Sascha L. Teichmann |
s/Modeldaten/Modelldaten/
|
| Thu, 17 Dec 2009 16:08:37 +0000 |
Sascha L. Teichmann |
Fixed typo
|
| Thu, 17 Dec 2009 15:39:20 +0000 |
Sascha L. Teichmann |
Remove wkt line strings from i18n
|
| Thu, 17 Dec 2009 13:21:43 +0000 |
Ingo Weinzierl |
Changed depending value for gap detection in verticalprofile charts on meshes.
|
| Thu, 17 Dec 2009 11:42:21 +0000 |
Ingo Weinzierl |
Fixed file-leak bug and sourced xml parsing out to XMLUtils of artifactdatabase.
|
| Thu, 17 Dec 2009 10:20:05 +0000 |
Ingo Weinzierl |
Added column labels for csv export of timeseries, vertical and horizontal profiles.
|
| Wed, 16 Dec 2009 23:07:47 +0000 |
Hans Plum |
Issue 129: Fixed i18n strings for german language
|
| Wed, 16 Dec 2009 22:10:46 +0000 |
Sascha L. Teichmann |
Fixed index error in i-gap detection in 2D interpolation.
|
| Wed, 16 Dec 2009 19:29:05 +0000 |
Ingo Weinzierl |
Added horizontal crossprofile charts to chart pallet. Fixed some bugs before interpolation.
|
| Wed, 16 Dec 2009 11:58:44 +0000 |
Ingo Weinzierl |
Workarround: Store lower and upper bounds of data while iterating over all data and set the max range of axes with these information. JFreeCharts method NumberAxis.setAutoRange(true) doesn't seem to work properly.
|
| Wed, 16 Dec 2009 08:05:25 +0000 |
Ingo Weinzierl |
Removed usesless chart factories.
|
| Wed, 16 Dec 2009 01:32:19 +0000 |
Sascha L. Teichmann |
Added result set handling. Needs some testing.
|
| Tue, 15 Dec 2009 22:25:53 +0000 |
Sascha L. Teichmann |
Added code to do 2D interpolations along a digitied track on the map.
|
| Tue, 15 Dec 2009 15:58:58 +0000 |
Sascha L. Teichmann |
Added mapping from linear diagram space to 2D map coordinates.
|
| Tue, 15 Dec 2009 15:50:39 +0000 |
Tim Englich |
Issue96 Resloved big that one entry is missiing in the Statitic.
|
| Tue, 15 Dec 2009 15:30:25 +0000 |
Ingo Weinzierl |
Fetch ChartTheme from CallContext instead of creating it each time before creating a chart.
|
| Tue, 15 Dec 2009 15:14:21 +0000 |
Sascha L. Teichmann |
Fill (i, j)-gaps when building index buffer.
|
| Tue, 15 Dec 2009 14:55:42 +0000 |
Tim Englich |
Added the Unit of the Parameter to the Query for Parameters in
|
| Tue, 15 Dec 2009 14:12:58 +0000 |
Sascha L. Teichmann |
Upgraded to Apache Commons Math 2.0.
|
| Tue, 15 Dec 2009 10:31:16 +0000 |
Tim Englich |
Added the name Productname for "horizontale Schnittprofile". to the
|
| Tue, 15 Dec 2009 10:20:16 +0000 |
Tim Englich |
Added Support for "horizontale Schnittprofile"
|
| Tue, 15 Dec 2009 10:13:09 +0000 |
Ingo Weinzierl |
Stabilized color of lines in charts. Exports (pdf, svg, png) will look like the chart in gui.
|
| Mon, 14 Dec 2009 15:56:20 +0000 |
Ingo Weinzierl |
Changed date representation in timeseries charts. Date format is sourced out to language ressource files.
|
| Mon, 14 Dec 2009 14:36:43 +0000 |
Sascha L. Teichmann |
Added buffer creator in index (i, j) space.
|
| Fri, 11 Dec 2009 11:18:21 +0000 |
Ingo Weinzierl |
Included case, that there is no start or end date while creating subtitles of horizontalprofile charts.
|
| Fri, 11 Dec 2009 10:41:24 +0000 |
Sascha L. Teichmann |
Removed needless imports.
|
| Fri, 11 Dec 2009 10:13:39 +0000 |
Tim Englich |
Added Z-Value to verticalcrosssection_mesh_chart_data.
|
| Fri, 11 Dec 2009 10:02:10 +0000 |
Tim Englich |
Split all Unittestcases in separat Classes. Now it is easier to uses the UnitTests with Maven.
|
| Fri, 11 Dec 2009 09:42:54 +0000 |
Ingo Weinzierl |
Fade out range axis gridlines in charts if there are more than one axis.
|
| Fri, 11 Dec 2009 09:05:17 +0000 |
Ingo Weinzierl |
Added axis labels for charts and use them while generating charts.
|
| Fri, 11 Dec 2009 08:44:46 +0000 |
Ingo Weinzierl |
Read x-axis label for timeseries charts from ressources, instead of a hard coded string in source.
|
| Wed, 09 Dec 2009 10:22:49 +0000 |
Ingo Weinzierl |
Added ChangeLog entry for last commit.
|
| Wed, 09 Dec 2009 09:47:10 +0000 |
Sascha L. Teichmann |
Dead artifacts are removed only every 15mins from
|
| Tue, 08 Dec 2009 13:52:42 +0000 |
Tim Englich |
Added the Unit of the Parameter to the Query for Parameters in
|
| Tue, 08 Dec 2009 13:38:21 +0000 |
Tim Englich |
Last Step of the Refactoring Work on the Transition Model.
|
| Tue, 08 Dec 2009 11:18:27 +0000 |
Ingo Weinzierl |
Added marker for different data sources in sql queries.
|
| Tue, 08 Dec 2009 08:39:03 +0000 |
Tim Englich |
Some Refactoring work done.
|
| Mon, 07 Dec 2009 17:03:24 +0000 |
Ingo Weinzierl |
Changed the way of adding data to charts. Same parameters have one axis - not each parameter its own one.
|
| Mon, 07 Dec 2009 10:33:31 +0000 |
Ingo Weinzierl |
Sourced ChartFactory call out to an own method, which is overriden by TimeSeriesChart.
|
| Fri, 04 Dec 2009 15:31:07 +0000 |
Ingo Weinzierl |
ChangeLog entry and ressource bundles for last commit.
|
| Fri, 04 Dec 2009 09:04:10 +0000 |
Sascha L. Teichmann |
Cleaned up ChangeLog a bit.
|
| Wed, 02 Dec 2009 15:42:46 +0000 |
Ingo Weinzierl |
Added time gap detection to time series charts.
|
| Wed, 02 Dec 2009 11:07:40 +0000 |
Ingo Weinzierl |
Added JBoss repository for JFreeChart 1.0.13.
|
| Wed, 02 Dec 2009 10:50:12 +0000 |
Ingo Weinzierl |
New options in chart template: visibility of lines and points in charts and point's size.
|
| Tue, 01 Dec 2009 16:27:56 +0000 |
Tim Englich |
Added one more Transitionstep to each Testcase according to the refactored Transitionmodel.
|
| Tue, 01 Dec 2009 15:58:02 +0000 |
Tim Englich |
Refactoring of the Transitionmodel.
|
| Mon, 30 Nov 2009 15:08:47 +0000 |
Ingo Weinzierl |
Removed needless imports.
|
| Mon, 30 Nov 2009 15:04:26 +0000 |
Ingo Weinzierl |
Updated Batik library to 1.7
|
