ingo@478: 2010-01-15 Ingo Weinzierl ingo@478: ingo@478: Added support to step back to the point where the user is able to choose ingo@478: the product of a FIS. ingo@478: ingo@478: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactFactory.java, ingo@478: src/main/java/de/intevation/gnv/artifacts/GNVProductArtifactFactory.java: ingo@478: Cleaned up factories regarding their tasks. GNVArtifactFactory creates ingo@478: concrete products. GNVProductArtifactFactory handles all FIS and knows ingo@478: the products of a FIS. ingo@478: ingo@478: * src/main/java/de/intevation/gnv/artifacts/fis/FISArtifact.java: Removed, ingo@478: because it is not used anymore. ingo@478: ingo@478: * src/main/java/de/intevation/gnv/artifacts/fis/product/Product.java, ingo@478: src/main/java/de/intevation/gnv/artifacts/fis/product/DefaultProduct.java: ingo@478: A Product does no longer save its factory but the name of its factory as ingo@478: string. ingo@478: ingo@478: * src/main/java/de/intevation/gnv/artifacts/fis/SelectProductArtifact.java: ingo@478: This artifact will no longer read the config file to get information about ingo@478: the products of a fis. The products are set via setter method out of the ingo@478: ArtifactFactory where this artifact is build. ingo@478: ingo@478: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java: Added the ingo@478: possibility to step back to the point where the user can choose a product. ingo@478: If the target of advance is 'product' we fetch the ingo@478: GNVProductArtifactFactory from ArtifactDatabase and create a new ingo@478: SelectProductArtifact, put it into the ProxyArtifact and clean up the ugly ingo@478: cache. ingo@478: ingo@478: * doc/conf/conf.xml: Create top level FIS artifacts with ingo@478: GNVProductArtifactFactory instead of GNVArtifactFactory. ingo@478: tim@477: 2010-01-15 Tim Englich tim@477: tim@477: * doc/conf/arcsdeconnectionpool.properties: tim@477: Added the Property serverRoundtripInterval to the Configuration an tim@477: set its Value to 15 Minutes. tim@477: tim@476: 2010-01-15 Tim Englich tim@476: tim@476: * src/test/java/de/intevation/gnv/artifacts/TimeSeriesPointVerticalProfileTestCase.java (testArtifact): tim@476: Added new Step for querying the Years where measurements has been done into the tim@476: Testcase. tim@476: tim@476: * src/test/ressources/verticalprofile/verticalprofile_step_07_out_statistics.xml, tim@476: src/test/ressources/verticalprofile/verticalprofile_step_07_out_odv.xml, tim@476: src/test/ressources/verticalprofile/verticalprofile_step_07_out_csv.xml, tim@476: src/test/ressources/verticalprofile/verticalprofile_step_07_out_chart.xml, tim@476: src/test/ressources/verticalprofile/verticalprofile_step_07_feed.xml, tim@476: src/test/ressources/verticalprofile/verticalprofile_step_07_advance.xml, tim@476: src/test/ressources/verticalprofile/verticalprofile_step_06_feed.xml, tim@476: src/test/ressources/verticalprofile/verticalprofile_step_06_advance.xml, tim@476: src/test/ressources/verticalprofile/verticalprofile_step_05_feed.xml, tim@476: src/test/ressources/verticalprofile/verticalprofile_step_04_advance.xml, tim@476: src/test/ressources/verticalprofile/verticalprofile_step_05_advance.xml: tim@476: Added State-Ressource for the new step Year and modified the other Ressource-Files tim@476: so that the new Step is queued in the right direction. tim@476: ingo@475: 2010-01-13 Ingo Weinzierl ingo@475: ingo@475: * src/main/java/de/intevation/gnv/artifacts/fis/FISSelectArtifact.java, ingo@475: src/main/java/de/intevation/gnv/artifacts/fis/SelectProductArtifact.java: ingo@475: Renamed FISSelectArtifact to SelectProductArtifact which fits better, ingo@475: because the intent of this artifact is to choose a product - not a FIS. ingo@475: ingo@475: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java, ingo@475: src/main/java/de/intevation/gnv/artifacts/GNVArtifactFactory.java: ingo@475: Replaced FISSelectArtifact with SelectProductArtifact. ingo@475: sascha@474: 2010-01-13 Sascha L. Teichmann sascha@474: sascha@474: * src/test/java/de/intevation/gnv/artifacts/util/ShapeFileWriterTestCase.java, sascha@474: src/main/java/de/intevation/gnv/state/profile/verticalcrosssection/VerticalCrossSectionOutputState.java: sascha@474: Removed needless imports. sascha@474: sascha@474: * src/main/java/de/intevation/gnv/math/AreaInterpolation.java: New. Interpolates sascha@474: area for a given bounding box, taking gaps and DEM into account. sascha@474: Not very fast. Use bilinear interpolation to match the "Profilschnitt". sascha@474: Possible TODOs: sascha@474: - speed up by assuming the grid is not sparse. sascha@474: - use higher interpolation methods. sascha@474: sascha@474: * src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContext.java, sascha@474: src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContextFactory.java: sascha@474: Added configuration for ground interpolation. sascha@474: sascha@474: * src/main/java/de/intevation/gnv/state/profile/horizontalcrosssection/HorizontalCrossSectionMeshOutputState.java: sascha@474: Add helper functions to access configuration. sascha@474: sascha@474: * src/main/java/de/intevation/gnv/math/Interpolation2D.java: Simplified Code. sascha@474: sascha@474: * src/main/java/de/intevation/gnv/math/L1Comparator.java: add setReference() sascha@474: method. sascha@474: ingo@473: 2010-01-13 Ingo Weinzierl ingo@473: ingo@473: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java: 'advance' ingo@473: method will now consider old states. We reset input data of target state ingo@473: and clean cache from 'future data' before stepping back to previous ingo@473: states. ingo@473: ingo@473: TODO: Refactor caching mechanism which should take care of different ingo@473: states' hash values to be able to use the cache more efficiently. ingo@473: ingo@473: * src/main/java/de/intevation/gnv/state/State.java: Added method to return ingo@473: map which stores input data of the current state. ingo@473: ingo@473: * src/main/java/de/intevation/gnv/state/describedata/MinMaxDescribeData.java, ingo@473: src/main/java/de/intevation/gnv/state/describedata/SingleValueDescribeData.java, ingo@473: src/main/java/de/intevation/gnv/state/describedata/KeyValueDescibeData.java ingo@473: src/main/java/de/intevation/gnv/state/describedata/DefaultSingleValueDescribeData.java, ingo@473: src/main/java/de/intevation/gnv/state/describedata/DefaultMinMaxDescribeData.java, ingo@473: src/main/java/de/intevation/gnv/state/describedata/DefaultKeyValueDescribeData.java: ingo@473: Add current state's name when initializing new objects of these classes. ingo@473: The name of a state is added as attribute to a node when creating the ingo@473: describe-document. The xsl transformer will read this attribute and create ingo@473: a link which allows the user to step back to previous states. ingo@473: ingo@473: * src/main/java/de/intevation/gnv/state/SingleInputState.java, ingo@473: src/main/java/de/intevation/gnv/state/MinMaxState.java, ingo@473: src/main/java/de/intevation/gnv/state/StateBase.java: ingo@473: - Add state name when creating objects to store input data. ingo@473: - Use XMLUtils.ElementCreator to write namespace aware xml elements. ingo@473: - Add state names as attributes to xform elements. ingo@473: - Append old states to list of reachable targets in describe-document. ingo@473: - Remove data from cache which belong to future states after stepping ingo@473: back to a previous state. ingo@473: - Remove input data of current state after stepping back. ingo@473: sascha@472: 2010-01-12 Sascha L. Teichmann sascha@472: sascha@472: * doc/conf/conf.xml, sascha@472: src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContext.java, sascha@472: src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContextFactory.java: sascha@472: Added configuration od file system directory of generate "Horizontalschnitt" sascha@472: shape files. sascha@472: sascha@471: 2010-01-12 Sascha L. Teichmann sascha@471: sascha@471: * src/main/java/de/intevation/gnv/utils/WKTUtils.java, sascha@471: src/main/java/de/intevation/gnv/state/profile/horizontalcrosssection/HorizontalCrossSectionMeshOutputState.java: sascha@471: Code cleanup sascha@471: ingo@470: 2010-01-12 Ingo Weinzierl ingo@470: ingo@470: * src/main/java/de/intevation/gnv/state/SingleInputState.java, ingo@470: src/main/java/de/intevation/gnv/state/MinMaxState.java, ingo@470: src/main/java/de/intevation/gnv/state/CoordinateSelectionState.java: ingo@470: Data, describing the user interface, is stored in a list instead of a ingo@470: collection, now. This makes it easier to remove the last element if we ingo@470: advance back. ingo@470: ingo@470: * src/main/java/de/intevation/gnv/state/State.java, ingo@470: src/main/java/de/intevation/gnv/state/StateBase.java: Added a 'reset' ingo@470: method to clear data which has been inserted before returning to an old ingo@470: state. This is called when we try to advance into the past. ingo@470: ingo@470: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java: Now, it's ingo@470: possible to advance to an earlier state. The 'advance' method first ingo@470: searches for a given target name in the list of reachable targets. If no ingo@470: future target has been found, the method looks for an old state with this ingo@470: target name. The last option is to return to the initial step for choosing ingo@470: the FIS, if the target name is 'start'. ingo@470: tim@468: 2010-01-12 Tim Englich tim@468: tim@469: * doc/conf/queries.properties: tim@469: Added Query for Years in VerticalProfiles in TimeSeriesPoints. tim@469: Modified the Query for Dates in VerticalProfiles in TimeSeriesPoints. tim@469: tim@469: * doc/conf/products/verticalprofile/conf_timeseriespoint.xml: tim@469: Added State for choosing the year and than it will only display tim@469: the Dates which are within the coosen year. tim@469: tim@469: * src/main/resources/lang/artifactMessages*.properties: tim@469: Added Ressource for diaplaying year. tim@469: tim@469: 2010-01-12 Tim Englich tim@468: * src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContextFactory.java (configureHorizontalCrossSection): tim@468: Added the Method to load the Configurationsettings for horizontal-cross-sections tim@468: from the global Configuartion and put it into the Context. tim@468: tim@468: * src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContext.java: tim@468: Added static variables to define the Keys used for horizontal-cross-sections tim@468: tim@468: * src/main/java/de/intevation/gnv/state/profile/horizontalcrosssection/HorizontalCrossSectionMeshOutputState.java (getChartResult): tim@468: Integrated the Possibility to determin the required Snipped of an Mesh tim@468: using the ij-Index determined by the given Polygon. tim@468: Added the process-method which must still be implemented. tim@468: tim@468: * src/main/java/de/intevation/gnv/utils/WKTUtils.java (worldEnvelopeCoordinatesToIndex): tim@468: Added worldEnvelopeCoordinatesToIndex-Method for determining the ij-Coodinates tim@468: for a given Envelope. tim@468: Some refactoring-Work done for reuse some existing Code of this Class. tim@468: tim@468: * doc/conf/conf.xml: tim@468: Added the Configuration-Node for horizontal-cross-sections in this tim@468: File. tim@468: tim@468: * doc/conf/products/horizontalcrosssection/conf_mesh.xml: tim@468: Added ij-Query Node to OutputState to make the Querystring tim@468: available to this Product. tim@468: ingo@467: 2010-01-12 Ingo Weinzierl ingo@467: ingo@467: * src/main/java/de/intevation/gnv/state/timeseries/TimeSeriesOutputState.java: ingo@467: Use XMLUtils to read evaluate xpath expressions. Adapted xpath ingo@467: expressions regarding namespace and prefix. ingo@467: tim@466: 2010-01-11 Tim Englich tim@466: tim@466: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCaseBase.java (readDocument): tim@466: Set NameSpaceAware to true to get the Unittests work again. tim@466: The Out-Calls doesn't work jet!!! tim@466: tim@466: sascha@465: 2010-01-11 Sascha L. Teichmann sascha@465: sascha@465: * pom.xml: Introduced dependency to GeoTools 2.4.5 (maybe a bit too old) sascha@465: Needed to write traced polygons and line strings to shape files. sascha@465: sascha@465: * src/main/java/de/intevation/gnv/utils/Pair.java: New sascha@465: simple pair tuple for type safety. sascha@465: sascha@465: * src/main/java/de/intevation/gnv/utils/ShapeFileWriter.java: sascha@465: New. Writes multi polygons and multi line strings to sascha@465: shapefiles. Writing the multi polygons works. sascha@465: sascha@465: !! Writing the multi line strings fails! sascha@465: !! Its not clear by now if its a geotool bug or a sascha@465: !! misunderstanding of the API. The polygon and sascha@465: !! the line string export are coded symmetrically sascha@465: !! but the line string export complains about invalid sascha@465: !! FIDs states. sascha@465: sascha@465: * src/main/java/de/intevation/gnv/raster/AbstractProducer.java: sascha@465: New. Abstract base class for multi line string/polygons producers sascha@465: as backends of the vectorizer. sascha@465: sascha@465: * src/main/java/de/intevation/gnv/raster/PolygonDatasetProducer.java: sascha@465: Inherits from AbstractProducer now. sascha@465: sascha@465: * src/main/java/de/intevation/gnv/raster/IsoProducer.java: sascha@465: New. Common base class for the iso line producers, inherits sascha@465: from AbstractProducer. sascha@465: sascha@465: * src/main/java/de/intevation/gnv/raster/IsoPolygonSeriesProducer.java: sascha@465: Moved some code to new base class IsoProducer. sascha@465: sascha@465: * src/main/java/de/intevation/gnv/raster/DemuxRingsHandler.java: sascha@465: New. Little helper class to demultiplex many ring handlers on sascha@465: one single vectorizer. sascha@465: sascha@465: * src/main/java/de/intevation/gnv/raster/IsoAttributeGenerator.java: sascha@465: The implemented AttributeGenerator interface is defined in IsoProducer sascha@465: now. sascha@465: sascha@465: * src/main/java/de/intevation/gnv/raster/JTSMultiPolygonProducer.java: sascha@465: New. Traces regions directly to JTS multi polygons. sascha@465: sascha@465: * src/main/java/de/intevation/gnv/raster/JTSMultiLineStringProducer.java: sascha@465: New. Traces iso lines directly to JTS multi line strings. sascha@465: sascha@465: * src/main/java/de/intevation/gnv/math/QueriedXYDepth.java, sascha@465: src/main/java/de/intevation/gnv/statistics/AbstractStatistics.java: sascha@465: Removed needless imports. sascha@465: ingo@464: 2010-01-09 Ingo Weinzierl ingo@464: ingo@464: * src/main/java/de/intevation/gnv/artifacts/fis/FISSelectArtifact.java: ingo@464: Artifact used for the initial steps when no product is chosen. ingo@464: ingo@464: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactFactory.java: Factory ingo@464: to create artifacts. It is used to put a new FISSelectArtifact into the ingo@464: ProxyArtifact for the initial steps when no product is chosen. ingo@464: ingo@464: * doc/conf/conf.xml: Use the ProxyArtifact instead of FISArtifact and ingo@464: GNVArtifactFactory to create it. ingo@464: ingo@464: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java: ingo@464: - Defined XPath expressions at the top of the class instead of directly in ingo@464: code. ingo@464: - Use XMLUtils.ElementCreator to create new namespace aware nodes and ingo@464: attributes. ingo@464: - Defined 'describe' method to create user interface for initial steps. ingo@464: ingo@464: * src/main/java/de/intevation/gnv/profile/horizontalcrosssection/HorizontalCrossSectionMeshArtifact.java, ingo@464: src/main/java/de/intevation/gnv/profile/verticalcrosssection/VerticalCrossSectionMeshArtifact.java, ingo@464: src/main/java/de/intevation/gnv/profile/horizontal/HorizontalProfileArtifact.java, ingo@464: src/main/java/de/intevation/gnv/profile/vertical/VerticalProfileArtifact.java, ingo@464: src/main/java/de/intevation/gnv/timeseries/TimeSeriesArtifact.java: ingo@464: Moved 'describe' methods which had no special code to super class. ingo@464: ingo@464: * src/main/java/de/intevation/gnv/state/StateBase.java: Use ingo@464: XMLUtils.ElementCreator to create new elements in xml documents. ingo@464: sascha@463: 2010-01-09 Sascha L. Teichmann sascha@463: sascha@463: * doc/conf/conf.xml: Added configuration for vertical cross sascha@463: section ground interpolation. sascha@463: sascha@463: * src/main/java/de/intevation/gnv/math/QueriedXYDepth.java: Uses configured sascha@463: interpolation method now. sascha@463: sascha@463: * src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContextFactory.java: sascha@463: Read configuration for vertical cross section ground interpolation. sascha@463: sascha@463: * src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContext.java: sascha@463: Added key and default for vertical cross section ground interpolation. sascha@463: sascha@463: * src/main/java/de/intevation/gnv/state/profile/verticalcrosssection/VerticalCrossSectionOutputState.java: sascha@463: Forwards vertical cross section ground interpolation to QueriedXYDepth. sascha@463: sascha@462: 2010-01-09 Sascha L. Teichmann sascha@462: sascha@462: * src/main/java/de/intevation/gnv/state/profile/verticalcrosssection/VerticalCrossSectionOutputState.java: sascha@462: Prevent NPE if no results are produced by vertical cross sections. sascha@462: sascha@462: * src/main/java/de/intevation/gnv/math/QueriedXYDepth.java: Replaced sascha@462: envelope checking by direct coordinate checking in tile cache. sascha@462: Store the last used tile explicitly to save it from being collected sascha@462: by the garbage collector. sascha@462: tim@459: 2010-01-08 Tim Englich tim@459: tim@461: * src/main/java/de/intevation/gnv/utils/InputValidator.java (getPointValue), tim@461: src/main/java/de/intevation/gnv/timeseries/gap/DefaultTimeGap.java (key), tim@461: src/main/java/de/intevation/gnv/state/profile/horizontalcrosssection/HorizontalCrossSectionMeshOutputState.java (getStatisticsGenerator), tim@461: src/main/java/de/intevation/gnv/state/StateBase.java (extractKVP), tim@461: src/main/java/de/intevation/gnv/state/CoordinateSelectionState.java (prepareInputData4RegionDBQuery), tim@461: src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java (advance): tim@461: Removed Encodingerrors from listed Files. All Files are now UTF-8 compliant. tim@461: ISSUE 137 tim@461: tim@461: 2010-01-08 Tim Englich tim@460: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestSuite.java (suite): tim@460: Added a Testsuit for executing all Testcases at once. tim@460: tim@460: * src/test/ressources/verticalprofile_mesh/verticalprofile_step_10_feed.xml, tim@460: src/test/ressources/timeseries_mesh/timeseries_step_08_feed.xml, tim@460: src/test/ressources/horizontalProfile_mesh/horizontalprofile_step_10_feed.xml: tim@460: Chanded the feeded Datevalues because the Values in the Database has changed. tim@460: tim@460: * src/test/ressources/verticalcrosssection_mesh/verticalcrosssection_step_03_advance.xml, tim@460: src/test/java/de/intevation/gnv/artifacts/MeshVerticalCrossSectionTestCase.java (testArtifact): tim@460: Switched Testcase to the new Condition that an LineString has to be entered. tim@460: tim@460: * src/test/ressources/horizontalcrosssection_mesh/horizontalcrosssection_step_*.xml, tim@460: src/test/java/de/intevation/gnv/artifacts/MeshHorizontalCrossSectionTestCase.java (testArtifact): tim@460: Switched Testcase to the new Condition that an Polygon has to be entered. tim@460: tim@460: 2010-01-08 Tim Englich tim@460: tim@459: * src/main/resources/lang/artifactMessages.properties: tim@459: Added Ressources for the GUI for visualizing the Inputstate for tim@459: Polygons. tim@459: * doc/conf/products/horizontalcrosssection/conf_mesh.xml: tim@459: Added State for the possibility to enter a Polygon which should trim tim@459: the Data that will be visualized. tim@459: * src/main/java/de/intevation/gnv/state/profile/horizontalcrosssection/HorizontalCrossSectionMeshOutputState.java (getChart): tim@459: Integrated the access to the Polygon which should be used to trim the Data which tim@459: should be visualized. tim@459: sascha@458: 2010-01-05 Sascha L. Teichmann sascha@458: sascha@458: * src/main/java/de/intevation/gnv/math/QueriedXYDepth.java: sascha@458: - Simplified code sascha@458: - Search tile cache in reversed order because its more likely sascha@458: that last loaded tile is used more than once. sascha@458: - Stores cached tiles under soft references to prevent the sascha@458: possible case to flood the memory with hires tiles. sascha@458: tim@457: 2010-01-05 Tim Englich tim@457: tim@457: * src/main/java/de/intevation/gnv/math/QueriedXYDepth.java (depth): tim@457: Added the usage of the new RasterObject integrated in the geo-backend. tim@457: Now the Performance is much better accessing the depth to an coordinate. tim@457: ingo@456: 2010-01-04 Ingo Weinzierl ingo@456: ingo@456: * src/main/java/de/intevation/gnv/utils/ArtifactXMLUtilities.java: Declared ingo@456: method to create a new xforms element as static to be able to use it ingo@456: without instantiating an object of this class. ingo@456: ingo@456: * src/main/java/de/intevation/gnv/state/StateBase.java: Splitted code pathes ingo@456: of static and dynamic nodes. Static nodes contain the selected value ingo@456: only instead of transfering the complete stack of possible values again. ingo@456: tim@455: 2010-01-04 Tim Englich tim@455: ingo@456: * src/main/java/de/intevation/gnv/state/profile/verticalcrosssection/VerticalCrossSectionOutputState.java (process): ingo@456: Changed the XYDepth-Interface-Implementation to QueriedXYDepth ingo@456: * doc/conf/queries.properties: ingo@456: Added the Query for Rasterdataaccess. ingo@456: * src/main/java/de/intevation/gnv/math/QueriedXYDepth.java (QueriedXYDepth): ingo@456: Added Implementation of the XYDepth-Interface for Querying the height ingo@456: of an Position using the geo-backend interface. ingo@456: It is only nessesary to add a Query with the id rasterQuery to the query-Properties. tim@455: sascha@454: 2010-01-04 Sascha L. Teichmann sascha@454: sascha@454: * src/main/java/de/intevation/gnv/statistics/Statistics.java: sascha@454: Changed interface to allow general object results as sascha@454: input for statistic calculation. This is needed because sascha@454: the vertical cross section produces no SQL like resultsets. sascha@454: sascha@454: * src/main/java/de/intevation/gnv/statistics/AbstractStatistics.java: sascha@454: New. Added common base class for different kind of statistics. sascha@454: TODO: Move more common code into this class. sascha@454: sascha@454: * src/main/java/de/intevation/gnv/statistics/VerticalCrossSectionStatistics.java: sascha@454: New. Statistics for vertical cross sections. Does nothing sascha@454: by now. sascha@454: sascha@454: * src/main/java/de/intevation/gnv/state/profile/verticalcrosssection/VerticalCrossSectionOutputState.java: sascha@454: Creates a VerticalCrossSectionStatistics object as statistics sascha@454: generator now. sascha@454: sascha@454: * src/main/java/de/intevation/gnv/statistics/TimeseriesStatistics.java: sascha@454: Inherits from AbstractStatistics now. Some code moved to new sascha@454: base class. sascha@454: sascha@454: * src/main/java/de/intevation/gnv/state/timeseries/TimeSeriesOutputState.java: sascha@454: Cleaned up the usage of statistics. sascha@454: sascha@453: 2010-01-04 Sascha L. Teichmann sascha@453: sascha@453: * src/main/java/de/intevation/gnv/math/Interpolation3D.java: sascha@453: Fixed problem with running to max depth on every column. sascha@453: sascha@452: 2010-01-04 Sascha L. Teichmann sascha@452: sascha@452: * src/main/java/de/intevation/gnv/state/timeseries/TimeSeriesOutputState.java: sascha@452: Fix class cast exception to enable PDF export of sascha@452: vertical cross section charts. sascha@452: sascha@452: * ChangeLog: Typo fixes. sascha@452: sascha@451: 2010-01-04 Sascha L. Teichmann sascha@451: sascha@451: * src/main/java/de/intevation/gnv/jfreechart/PolygonRenderer.java: sascha@451: Uses ValueAxis.valueToJava2D() to transform data values into chart sascha@452: space. This is slower than doing it via the Java2D matrix stack sascha@451: but its more the JFreeChart way and prevents transforming of sascha@451: graphical attributes too. TODO: Speed this up again! sascha@451: sascha@451: * src/main/java/de/intevation/gnv/jfreechart/PolygonPlot.java: sascha@451: Forward plot to polygon renderer to make domain and range sascha@451: axis accessible. sascha@451: sascha@451: * src/main/java/de/intevation/gnv/math/XYColumn.java: Moved code a bit. sascha@451: sascha@450: 2010-01-04 Sascha L. Teichmann sascha@450: sascha@450: * src/main/java/de/intevation/gnv/jfreechart/PolygonSeriesLabelGenerator.java: sascha@450: New. Interface to generate labels for polygon series. sascha@450: sascha@450: * src/main/java/de/intevation/gnv/jfreechart/PolygonRenderer.java: sascha@450: Added logic to generate and render labels of polygons. sascha@450: The implemented layout algorithm is greedy. For all sascha@450: polygons with labels the label is placed on the center of sascha@450: the ring, which center in terms of the indices of the vertices. sascha@450: If the bounding box of the label intersects the bounding box sascha@450: of a an already placed one alternative places are tried. sascha@450: In level order positions at 1/4, 3/4, 1/8, 3/8, 5/8, 7/8 and sascha@450: so on are evaluated for non intersections with former placed labels. sascha@450: This terminates if a free place is found or all index positions sascha@450: are exhausted. If no free position is found the label is omitted. sascha@450: sascha@450: The visual result is okay but could be improved by a more clever sascha@450: algorithm e.g. tension reduction in the graph of labels. sascha@450: sascha@450: TODO: Improve clipping against chart borders. sascha@450: sascha@450: * src/main/java/de/intevation/gnv/jfreechart/LevelOrderIndices.java: sascha@450: New. Little helper class to generate the level order index sascha@450: traversal used in the label layout. Placed in the jfreechart sascha@450: package to keep it clean from gnv dependencies. sascha@450: sascha@450: * src/main/java/de/intevation/gnv/jfreechart/PolygonPlot.java: sascha@450: Added some methods to access the domain and range axis and sascha@450: there edge position. Mainly C&P from JFreeCahrts XYPlot sascha@450: to ease the coordinate transformation between Java2D and sascha@450: the value spaces of the chart. Call the label generation sascha@450: of the polygon renderer. sascha@450: sascha@450: * src/main/java/de/intevation/gnv/chart/VerticalCrossSectionChart.java: sascha@450: Added an implementation of PolygonSeriesLabelGenerator to sascha@450: generate localized labels for the iso lines. sascha@450: sascha@449: 2010-01-03 Sascha L. Teichmann sascha@449: sascha@449: * src/main/java/de/intevation/gnv/chart/VerticalCrossSectionChart.java: sascha@449: Only add colors to scale which are in the chart. sascha@449: sascha@449: * src/main/java/de/intevation/gnv/raster/Palette.java: Added sascha@449: getter for 'color' field of palette entry. sascha@449: sascha@448: 2010-01-03 Sascha L. Teichmann sascha@448: sascha@448: * src/main/java/de/intevation/gnv/state/profile/verticalcrosssection/VerticalCrossSectionOutputState.java: sascha@448: Generate iso line classes according gnv-issues/issue108: sascha@448: sascha@448: - If there are more than nine colors used in the chart sascha@448: only the borders of the regions are traced. sascha@448: - If there are less than ten colors each color region sascha@448: is devided into two sub regions. sascha@448: - If there are less than five colors each color region sascha@448: is devided into five sub regions. sascha@448: sascha@448: Generate attribute per iso line class with the parameter value sascha@448: of the iso line. sascha@448: sascha@448: * src/main/java/de/intevation/gnv/raster/IsoPolygonSeriesProducer.java: sascha@448: Renamed inner interface from LabelGenerator to AttributeGenerator to sascha@448: reflect the fact that the concrete label generation is a matter sascha@448: of i18n too. The concrete label generation should be done when sascha@448: the final chart is going to be created. TODO: Add sascha@448: a JFreeChart style label generator to PolygonRenderer sascha@448: sascha@448: * src/main/java/de/intevation/gnv/raster/IsoAttributeGenerator.java: sascha@448: New. Implements the AttributeGenerator interface. It takes sascha@448: the indices of the neighboring regions, uses these values sascha@448: to look into the iso palette and averages the parameter values sascha@448: at the touching borders. This should help in cases where sascha@448: two regions are neighbored in the chart which are not neighbored sascha@448: in the palette which may happen by quantification artifacts. sascha@448: sascha@448: * src/main/java/de/intevation/gnv/raster/Palette.java: Added sascha@448: getters to 'from' and 'to' fields. sascha@448: sascha@448: * src/main/java/de/intevation/gnv/math/XYColumn.java: Fixed sascha@448: another silly bug with adding values at surface and ground. sascha@448: sascha@448: * ChangeLog: Typo fixes sascha@448: sascha@447: 2010-01-01 Sascha L. Teichmann sascha@447: sascha@447: * src/main/java/de/intevation/gnv/state/profile/verticalcrosssection/VerticalCrossSectionOutputState.java: sascha@447: Generate iso lines by dividing palette ranges in two sascha@448: parts each and trace them. This shows that the ideas described sascha@447: by K. Jancke in gnv-issues/issue108 are possible not the sascha@447: right way to go. Applying this strategy there would be sascha@447: locally to many isolines if there is a steep gradient. sascha@447: On the other side large areas are splitted in too less sections sascha@447: by too less iso lines. A better way may be a splitting with sascha@448: a look at the areas and shapes of the regions. Large, round sascha@448: regions need more splits. Long, thin regions need less. sascha@447: sascha@447: * src/main/java/de/intevation/gnv/raster/IsoPolygonSeriesProducer.java: sascha@447: Stabilized iso line hashing a bit. Added line width to sascha@447: give iso lines a more appealing presentation in the chart. sascha@447: The according value is stored in "line.width". sascha@447: sascha@447: * src/main/java/de/intevation/gnv/raster/Vectorizer.java: Fixed silly sascha@448: bug when simplifying lines. This prevented iso lines sascha@448: from rendering. sascha@447: sascha@447: * src/main/java/de/intevation/gnv/raster/Palette.java: Fixed index issue sascha@447: when generating a divided palette. sascha@447: sascha@447: * src/main/java/de/intevation/gnv/jfreechart/PolygonSeries.java: sascha@447: Do not crash with NPE any more when not having any series. sascha@447: sascha@447: * src/main/java/de/intevation/gnv/jfreechart/PolygonDataset.java: sascha@447: Added method to add a whole collection of series. Useful to add sascha@447: iso lines to dataset. sascha@447: sascha@447: * src/main/java/de/intevation/gnv/jfreechart/PolygonRenderer.java: sascha@447: Set the "line.width" attribute when rendering lines. sascha@447: sascha@446: 2010-01-01 Sascha L. Teichmann sascha@446: sascha@446: * doc/conf/conf.xml: Deactivated gauss filter because sascha@446: it blurs no data areas too. Moreover gauss filtering does not sascha@446: seem to be necessary at all. Possible TODO: Mask the no data sascha@446: areas while filtering. sascha@446: sascha@446: * src/main/java/de/intevation/gnv/state/profile/verticalcrosssection/VerticalCrossSectionOutputState.java: sascha@446: Added generation of polygon data suitable for PolygonPlot. sascha@446: sascha@446: * src/main/java/de/intevation/gnv/state/timeseries/TimeSeriesOutputState.java: sascha@446: Some hacks to display the new Chart. XXX: This class is sascha@446: a real mess ... but I've said that before. sascha@446: sascha@446: * src/main/java/de/intevation/gnv/chart/Chart.java: Made it sascha@446: serializable. sascha@446: sascha@446: * src/main/java/de/intevation/gnv/chart/VerticalCrossSectionChart.java: sascha@446: New. Chart for vertical cross sections. Mainly a copy of sascha@446: Ingo's prototype implementation. TODO: parameter based i18n. sascha@446: sascha@446: * src/main/java/de/intevation/gnv/math/Interpolation3D.java: Code sascha@446: simplification. Made it Serializable to be cachable persistently. sascha@446: sascha@446: * src/main/java/de/intevation/gnv/math/AttributedXYColumns.java: sascha@446: Added fields for the interpolation and the generated PolygonDataset. sascha@446: Its used as the data carrying object in cache now. sascha@446: sascha@446: * src/main/java/de/intevation/gnv/jfreechart/PolygonPlot.java: sascha@446: Removed println debug code. sascha@446: sascha@446: * src/main/java/de/intevation/gnv/jfreechart/PolygonRenderer.java: sascha@446: Added a little hack to draw the polygons of the interpolation. sascha@446: The values are in y-direction all below zero (depth is given sascha@446: by negative values) so the drawing is mirrored along y axis. sascha@446: This special behavior is determined by the position of data sascha@446: bounding box. At first I suspected a ccw issue here but some sascha@446: initial tests falsified this hypothesis. We need to have a sascha@446: deeper look at this but till than it works. sascha@446: sascha@446: * ChangeLog: Fixed some typos. sascha@446: sascha@445: 2009-12-30 Sascha L. Teichmann sascha@445: sascha@445: * doc/conf/conf.xml: Fixed defect XML sascha@445: sascha@445: * src/main/java/de/intevation/gnv/state/profile/verticalcrosssection/VerticalCrossSectionOutputState.java: sascha@445: Use configuration to generate JFreeChart compatible polygons. sascha@445: sascha@445: * src/main/java/de/intevation/gnv/raster/PaletteManager.java: sascha@445: Add method to access base palette. sascha@445: sascha@445: * src/main/java/de/intevation/gnv/raster/Vectorizer.java: sascha@445: Added logging and new constructor. sascha@445: sascha@445: * src/main/java/de/intevation/gnv/math/ConstantXYDepth.java: sascha@445: "Simulates" DEM with a constant depth. sascha@445: sascha@445: * src/main/java/de/intevation/gnv/math/Interpolation2D.java: sascha@445: Fixed bug with construction of buffer size. sascha@445: sascha@445: * src/main/java/de/intevation/gnv/math/Interpolation3D.java: sascha@445: Some clean ups. New method to calculate max depth. sascha@445: sascha@445: * src/main/java/de/intevation/gnv/math/XYColumn.java: sascha@445: Fixed bug with extrapolation. sascha@445: sascha@444: 2009-12-30 Sascha L. Teichmann sascha@444: sascha@444: * doc/conf/conf.xml: Added section gnv/vertical-cross-section sascha@444: to configure the "Profilschnitte". sascha@444: configures the size of sascha@444: the sample area. Defaults to 1024x768. sascha@444: ... configures the sascha@444: list of post processing filters applied to the sample area sascha@444: after the interpolation is done. Defaults to empty list. sascha@444: sascha@444: * src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContext.java: sascha@444: Added keys for vertical cross section samples and filters. sascha@444: sascha@444: * src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContextFactory.java: sascha@444: Parse the configuration for the new parameters. sascha@444: sascha@443: 2009-12-29 Sascha L. Teichmann sascha@443: sascha@443: * doc/conf/conf.xml: Added a gnv/horizontal-cross-section-profile sascha@443: section to configure the "horizontalen Schnittprofile". sascha@443: gives the number of samples the sascha@443: interpolation track is divided into. Defaults to 250 sascha@443: sascha@443: * src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContext.java: sascha@443: The names of the keys for fetching informations from the sascha@443: configuration context are stored here now instead of the factory. sascha@443: sascha@443: * src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContextFactory.java: sascha@443: Removed the lookup keys. Configure the "horizontalen Schnittprofile". sascha@443: sascha@443: * src/main/java/de/intevation/gnv/state/profile/horizontal/HorizontalProfileMeshCrossOutputState.java: sascha@443: Fetch number of samples from config now instead of no longer supported sascha@443: system property. sascha@443: sascha@443: * src/main/java/de/intevation/gnv/state/timeseries/TimeSeriesOutputState.java: sascha@443: The key from chart template config is now in GNVArtifactContext, too. sascha@443: sascha@442: 2009-12-29 Sascha L. Teichmann sascha@442: sascha@442: * doc/conf/conf.xml: Moved chart template and palette config sascha@442: into new section 'gnv'. sascha@442: sascha@442: * src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContextFactory.java: sascha@442: Adjusted to new 'gnv' section in config. sascha@442: Stores chat template under 'gnv.chart.template' and palettes sascha@442: under 'gnv.color.palettes'. sascha@442: Added authors. sascha@442: sascha@442: * src/main/java/de/intevation/gnv/utils/StringUtils.java: Fixed sascha@442: index out of bounds issue. sascha@442: sascha@441: 2009-12-29 Sascha L. Teichmann sascha@441: sascha@441: * src/main/java/de/intevation/gnv/raster/Filter.java: New. sascha@441: General filter mechanism raster in -> raster out. Useful sascha@441: to chain processing. The Filter.Factory takes an sascha@441: DOM element to configure itself. sascha@441: sascha@441: * src/main/java/de/intevation/gnv/raster/KernelFilter.java: sascha@441: New. Implements raster filters based on kernel folding. Has sascha@441: an inner class GaussFactory which acts as a factory to create sascha@441: Gauss filters. The attributes "sigma" and "radius" are read sascha@441: from the configuring DOM element to set up the parameters sascha@441: of the kernel. sascha@441: sascha@440: 2009-12-28 Sascha L. Teichmann sascha@440: sascha@440: * src/main/java/de/intevation/gnv/state/profile/horizontal/HorizontalProfileMeshCrossOutputState.java, sascha@440: src/main/java/de/intevation/gnv/state/profile/verticalcrosssection/VerticalCrossSectionOutputState.java, sascha@440: src/main/java/de/intevation/gnv/utils/WKTUtils.java: Refactored most sascha@440: silly code like inefficent access to input data and redundant sascha@440: WKT line string parsing. sascha@440: sascha@440: * src/main/java/de/intevation/gnv/raster/IsoPolygonSeriesProducer.java, sascha@440: src/main/java/de/intevation/gnv/math/XYColumn.java: sascha@440: Removed needless imports. sascha@440: sascha@439: 2009-12-28 Sascha L. Teichmann sascha@439: sascha@439: * src/main/java/de/intevation/gnv/state/OutputStateBase.java, sascha@439: src/main/java/de/intevation/gnv/state/timeseries/TimeSeriesOutputState.java, sascha@439: src/main/java/de/intevation/gnv/state/profile/vertical/VerticalProfileOutputState.java, sascha@439: src/main/java/de/intevation/gnv/state/profile/horizontal/HorizontalProfileOutputState.java, sascha@439: src/main/java/de/intevation/gnv/state/profile/horizontal/HorizontalProfileMeshCrossOutputState.java, sascha@439: src/main/java/de/intevation/gnv/state/profile/verticalcrosssection/VerticalCrossSectionOutputState.java, sascha@439: src/main/java/de/intevation/gnv/state/profile/horizontalcrosssection/HorizontalCrossSectionMeshOutputState.java: sascha@439: Bring CallContext down to the chart generation. This is necessary to sascha@439: access the configuration. BTW: this a much cleaner way than sascha@439: the omnipresent singletons all around in the code! sascha@439: sascha@439: Observation: All the stuff derived from OutputStateBase is coded very messy sascha@439: ... even if your demands are not high about aesthetic :-/ sascha@439: sascha@439: * src/main/java/de/intevation/gnv/utils/StringUtils.java: New. sascha@439: Some functions to ease working with strings. sascha@439: sascha@438: 2009-12-28 Sascha L. Teichmann sascha@438: sascha@438: * src/main/java/de/intevation/gnv/raster/PaletteManager.java: New. sascha@438: Used to manage several levels of palette subdivsions derived from sascha@438: base palette. Contains name and description of palette, too. sascha@438: sascha@438: * src/main/java/de/intevation/gnv/raster/Palette.java: Removed sascha@438: palette description because it is hold by the PaletteManager now. sascha@438: sascha@438: * src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContextFactory.java: sascha@438: The palettes are not stored under the name of the palette any longer. sascha@438: Instead the new attribute 'parameter-id' is splitted (comma separated) sascha@438: into integers which are use as keys now. The values are PaletteManagers. sascha@438: This should ease the access to an adequate PaletteManager when sascha@438: generating a chart for a certain parameter. sascha@438: sascha@438: * doc/conf/conf.xml: Added the 'parameter-ids' for the four palettes. sascha@438: The values are extracted from the gdiintern wiki. sascha@438: sascha@438: !!! This have to be in sync with the database parameter ids !!! sascha@438: sascha@437: 2009-12-27 Sascha L. Teichmann sascha@437: sascha@437: * src/main/java/de/intevation/gnv/raster/IsoPolygonSeriesProducer.java: sascha@437: New. Vectorizer rings callback which produces iso lines in sascha@437: form of PolygonSeries. These series can be added to PolygonDatasets. sascha@437: If a IsoPolygonSeriesProducer.LabelGenerator is given sascha@437: each of the series has an attribute "label" which could be used sascha@437: to label text on the plot. TODO: Add label rendering to plot. sascha@437: sascha@437: Iso line generation is a bit more sophisticated than pure sascha@437: region tracing. Along a border of a region there could sascha@446: be more than one type of neighborhood. This is due to quantification sascha@437: errors introduced by the fact that steep value gradients sascha@437: are sampled to less points. The only ways out would be an sascha@437: increase of the sample resolution or an other algorithm sascha@437: working directly on the interpolated floating point samples. sascha@437: sascha@437: * src/main/java/de/intevation/gnv/raster/Vectorizer.java: Made sascha@437: line simplification work with open polygons, too. sascha@437: sascha@437: * src/main/java/de/intevation/gnv/math/IJKey.java: Added method sascha@437: to sort (i, j) in place. sascha@437: sascha@437: * src/main/java/de/intevation/gnv/jfreechart/PolygonRenderer.java: sascha@437: Do not close line shapes because iso lines are not closed shapes sascha@437: in general. sascha@437: sascha@437: * src/main/java/de/intevation/gnv/raster/PolygonDatasetProducer.java: sascha@437: Added author. Some reformatting. sascha@437: sascha@436: 2009-12-26 Sascha L. Teichmann sascha@436: sascha@436: * src/main/java/de/intevation/gnv/raster/PolygonDatasetProducer.java: sascha@436: New. Vectorizer rings callback which produces PolygonDatasets suitable sascha@436: to be fed into PolygonPlot. sascha@436: sascha@436: * src/main/java/de/intevation/gnv/raster/Vectorizer.java: sascha@436: Forward height to rings callback. sascha@436: Made simplification of chains an option (default: true). sascha@436: This should be turn off if generating iso lines. sascha@436: Made edges hashable (handy to find neighbored edges in sascha@436: iso line scanning). sascha@436: sascha@436: * src/main/java/de/intevation/gnv/jfreechart/PolygonSeries.java: sascha@436: Added default constructor. Generate unique comparable long id sascha@436: in thos constructor. sascha@436: Added method to add a single ring. sascha@436: sascha@436: * src/main/java/de/intevation/gnv/jfreechart/PolygonDataset.java: sascha@436: Added constructor to construct with a collection of polygon sascha@436: series. sascha@436: sascha@435: 2009-12-25 Sascha L. Teichmann sascha@435: sascha@435: * src/main/java/de/intevation/gnv/raster/Palette.java: Added sascha@435: method subdive(N) to Palette class which creates a new sascha@435: palette in which each interval is splitted into N sascha@435: equal sized intervals. Infinity sized intervals are not sascha@435: splitted. This is useful to fulfill the conditions of sascha@435: gnv/issue108. sascha@435: sascha@434: 2009-12-23 Sascha L. Teichmann sascha@434: sascha@434: * src/main/java/de/intevation/gnv/math/Interpolation2D.java: sascha@434: Use local variable debug instead of asking log.isDebugEnabled() sascha@434: more than once. sascha@434: sascha@434: * src/main/java/de/intevation/gnv/math/XYColumn.java: extrapolate sascha@434: with boundary values. sascha@434: sascha@434: * src/main/java/de/intevation/gnv/math/Interpolation3D.java: sascha@434: Implements a 3D interpolation called 'Profilschnitt' along a sascha@434: track similiar to the 'Horizontaler Schnittprofil' which takes sascha@434: all k layers into account. sascha@434: sascha@434: At the interpolated (x, y) points columns of parameter values sascha@434: from surface to ground are interpolated. To do so the four sascha@434: next neighbor of that columns are figured out. Four sascha@434: cubic splines are fitted through these parameter values sascha@434: of these neighbors. Now its possible to continuous eval sascha@434: the parameter on each. Every entry in the interpolated column sascha@434: is interpolated bilinear from the four cubic spline interpolated sascha@434: neighbor values at the respective depth. sascha@434: sascha@434: The result is stored into a double valued raster. NaN values sascha@449: indicate interpolation gaps. sascha@434: sascha@433: 2009-12-23 Sascha L. Teichmann sascha@433: sascha@433: * src/main/java/de/intevation/gnv/math/XYColumn.java: Added a method sascha@433: prepare() which generates an continues interpolator for the sascha@433: given z values. if only one value is given a constant function sascha@433: is assumed. If the larger z-value is below zero the sascha@433: next lower value is supplemented at zero. Symmetrically sascha@433: if the lowest z-value is above the depth at the given point sascha@433: the lowest value is repeated at depth. This should guarantee sascha@433: that the gradient is vansihing towards the surface and the sascha@433: bottom of the ocean. sascha@433: sascha@433: If after the supplementation there are less than three points sascha@433: a linear interpolation is performed. If there are more than three sascha@433: points a higher degree interpolation is used instead. This defaults sascha@433: to a cubic spline interpolation. Overwrite the getInterpolator() sascha@433: function to replace this behavior. sascha@433: sascha@433: * src/main/java/de/intevation/gnv/math/ConstantFunction.java: New. sascha@433: Constant function used in interpolation. sascha@433: sascha@433: * src/main/java/de/intevation/gnv/math/LinearFunction.java: Added sascha@433: an inner class Univariate which fits into the interpolation sascha@433: framework. sascha@433: sascha@433: * src/main/java/de/intevation/gnv/math/HeightValue.java: Sort sascha@433: z-Values in descending order because we are below zero. sascha@433: sascha@433: * src/main/java/de/intevation/gnv/math/XYDepth.java: New. Interface sascha@433: to figure out the depth (negative values below surface) for sascha@433: a given coordinate. TODO: Implement this by query the DEM grid sascha@433: of the ocean. sascha@433: sascha@433: * src/main/java/de/intevation/gnv/math/AttributedXYColumns.java: Added sascha@433: authors. sascha@433: sascha@432: 2009-12-23 Sascha L. Teichmann sascha@432: sascha@432: * src/main/java/de/intevation/gnv/state/profile/verticalcrosssection/VerticalCrossSectionOutputState.java: sascha@433: When preprocessing database data only dissemble WKT points if we sascha@432: have to. sascha@432: Read z values as double value now. sascha@432: Commented out CSV export because it takes the database data sascha@432: as data which is not correct here. TODO: We need to implement some output sascha@432: based on the interpolated data. sascha@432: Added some type safety to better match the 2D code. sascha@432: sascha@432: * src/main/java/de/intevation/gnv/math/AttributedXYColumns.java: Stores sascha@432: XYColumns in ArrayList for better reused of the 2D code. sascha@432: sascha@432: * src/main/java/de/intevation/gnv/math/XYColumn.java: Removed toArray() sascha@432: method because its not needed any longer. sascha@432: sascha@431: 2009-12-23 Sascha L. Teichmann sascha@431: sascha@431: * src/main/java/de/intevation/gnv/math/XYColumn.java: Extends from sascha@431: Point2d now to make some of the code (x/y sorting, envelope, etc.) sascha@431: reusable in 3D from 2D code. sascha@431: sascha@431: * src/main/java/de/intevation/gnv/math/IJKey.java: New: The (i, j) hashing sascha@431: is now moved to this class because of the new inheritance of XYColumn. sascha@431: sascha@431: * src/main/java/de/intevation/gnv/state/profile/verticalcrosssection/VerticalCrossSectionOutputState.java: sascha@431: Adjusted the (i, j) hashing. sascha@431: sascha@431: * src/main/java/de/intevation/gnv/math/Point2d.java: Added a new constructor sascha@431: to make it easier to extend from it. sascha@431: sascha@431: * src/main/java/de/intevation/gnv/math/Interpolation2D.java: Made the buffer sascha@431: extend calculation a static method to be reusable in 3D case. sascha@431: sascha@430: 2009-12-22 Sascha L. Teichmann sascha@430: sascha@430: * doc/conf/conf.xml: Load salinity palette correctly. sascha@430: ingo@429: 2009-12-22 Ingo Weinzierl ingo@429: ingo@429: * src/main/java/de/intevation/gnv/state/profile/verticalcrosssection/VerticalCrossSectionOutputState.java: ingo@429: Preprocessing of data used for interpolation. ingo@429: ingo@429: * src/main/java/de/intevation/gnv/math/AttributedXYColumns.java: Data ingo@429: wrapper. Contains preprocessed data used for interpolation and some ingo@429: metadata used for chart creation. ingo@429: ingo@429: * src/main/java/de/intevation/gnv/math/XYColumn.java, ingo@429: src/main/java/de/intevation/gnv/math/HeightValue.java: Made them ingo@429: serializable and added hashCode() and equals() to XYColumn to use it as ingo@429: key in HashMaps. ingo@429: ingo@429: * src/main/java/de/intevation/gnv/state/profile/horizontalcrosssection/HorizontalCrossSectionMeshOutputState.java, ingo@429: src/main/java/de/intevation/gnv/state/profile/horizontal/HorizontalProfileMeshCrossOutputState.java, ingo@429: src/main/java/de/intevation/gnv/state/profile/horizontal/HorizontalProfileOutputState.java, ingo@429: src/main/java/de/intevation/gnv/state/profile/vertical/VerticalProfileOutputState.java, ingo@429: src/main/java/de/intevation/gnv/state/timeseries/TimeSeriesOutputState.java, ingo@429: src/main/java/de/intevation/gnv/state/OutputStateBase.java: Changed some ingo@429: method signatures. ingo@429: ingo@429: * src/main/java/de/intevation/gnv/statistics/TimeseriesStatistics.java: ingo@429: Improved error handling. Return empty statistic set if there are no input ingo@429: data. ingo@429: ingo@428: 2009-12-22 Ingo Weinzierl ingo@428: ingo@428: * doc/conf/products/verticalcrosssection/conf_mesh.xml: Adjusted ingo@428: configuration for verticalcrosssection ('Profilschnitt') products. ingo@428: ingo@428: * doc/conf/queries.properties: Adjusted sql query for chart generation of ingo@428: verticalcrosssection products. ingo@428: ingo@428: * src/main/java/de/intevation/gnv/state/StateBase.java, ingo@428: src/main/java/de/intevation/gnv/statistics/TimeseriesStatistics.java: Code ingo@428: refactoring and better error handling. ingo@428: ingo@427: 2009-12-22 Ingo Weinzierl ingo@427: ingo@427: * src/main/java/de/intevation/gnv/math/HeightValue.java, ingo@427: src/main/java/de/intevation/gnv/math/XYColumn.java: Added model classes to ingo@427: store information for interpolation. ingo@427: sascha@426: 2009-12-22 Sascha L. Teichmann sascha@426: sascha@426: * doc/conf/conf.xml: Added config section for palettes. sascha@426: sascha@426: * src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContextFactory.java: sascha@426: load palettes at start up. sascha@430: They are stored in a hash map under the key 'color.palettes'. The keys of sascha@430: the map are the names from the configuration, the values are sascha@426: de.intevation.gnv.raster.Palette objects. sascha@426: Put configuration of chart template into own method. sascha@426: sascha@426: * src/main/java/de/intevation/gnv/raster/Palette.java: Added a palette sascha@426: description. sascha@426: sascha@425: 2009-12-21 Sascha L. Teichmann sascha@425: sascha@425: * src/main/java/de/intevation/gnv/state/profile/horizontal/HorizontalProfileMeshCrossOutputState.java: sascha@425: Ignore invalid interpolations correctly. sascha@425: sascha@424: 2009-12-21 Sascha L. Teichmann sascha@424: sascha@424: * src/main/java/de/intevation/gnv/raster/Raster.java: New. Models 2D double sascha@424: rasters. Has some support for filtering with gauss kernels, building sascha@424: iso classes, etc. sascha@424: sascha@424: * src/main/java/de/intevation/gnv/raster/Palette.java: New. Maps double sascha@424: values to integer indices and colors. sascha@424: sascha@424: * src/main/java/de/intevation/gnv/raster/Vectorizer.java: New. Simple sascha@424: vectorizer which traces regions in integer rasters. sascha@424: sascha@424: * pom.xml: Added dependency to GNU Trove 2.1.1 which is needed by the sascha@424: vectorizer. sascha@424: ingo@423: 2009-12-21 Ingo Weinzierl ingo@423: ingo@423: * src/main/java/de/intevation/gnv/utils/WKTUtils.java, ingo@423: src/main/java/de/intevation/gnv/state/profile/horizontal/HorizontalProfileMeshCrossOutputState.java: ingo@423: Moved some methods back to old place. ingo@423: sascha@422: 2009-12-21 Sascha L. Teichmann sascha@422: sascha@422: Added Ingo Weinzierl's special JFreeChart classes. sascha@422: sascha@422: * src/main/java/de/intevation/gnv/jfreechart: New package. sascha@422: Should contain general JFreeChart stuff. sascha@422: sascha@422: * src/main/java/de/intevation/gnv/jfreechart/PolygonPlot.java: New. sascha@422: New type of plot to display multi-polygons with holes. sascha@422: sascha@422: * src/main/java/de/intevation/gnv/jfreechart/CompactXYItems.java: New. sascha@422: Basic vertex data model: a ring of a polygon. ccw = shell, cw = hole. sascha@422: sascha@422: * src/main/java/de/intevation/gnv/jfreechart/PolygonSeries.java: New. sascha@422: Attributes a set of rings with key/value pairs. sascha@422: sascha@422: * src/main/java/de/intevation/gnv/jfreechart/PolygonDataset.java: New sascha@422: List of PolygonSeries which makes it a multi-polygon. sascha@422: sascha@422: * src/main/java/de/intevation/gnv/jfreechart/PolygonRenderer.java: New sascha@422: A renderer to draw PolygonDatasets into a PolygonPlot. sascha@422: ingo@421: 2009-12-21 Ingo Weinzierl ingo@421: ingo@421: * doc/conf/products/verticalcrosssection/conf_mesh.xml: Prepared states and ingo@421: transitions of verticalcrosssection (german 'Profilschnitt'). ingo@421: ingo@420: 2009-12-21 Ingo Weinzierl ingo@420: ingo@420: * src/main/java/de/intevation/gnv/utils/WKTUtils.java ingo@420: src/main/java/de/intevation/gnv/state/profile/horizontal/HorizontalProfileMeshCrossOutputState.java: ingo@420: Outsourcing of some methods to prepare results for chart creation. ingo@420: sascha@419: 2009-12-21 Sascha L. Teichmann sascha@419: sascha@419: * doc/conf/palette/flow-velocity.xml: sascha@419: color palette for flow velocity "Fliessgeschwindigkeit". sascha@419: * doc/conf/palette/water-levels.xml: sascha@419: color palette for water levels "Wasserstaende". sascha@419: * doc/conf/palette/salinity.xml: sascha@419: color palette for salinity "Salzgehalt". sascha@419: * doc/conf/palette/water-temperature.xml: sascha@419: color palette for water temperature "Wassertemperatur". sascha@419: sascha@418: 2009-12-21 Sascha L. Teichmann sascha@418: sascha@418: * src/main/java/de/intevation/gnv/state/profile/horizontal/HorizontalProfileMeshCrossOutputState.java: sascha@418: Added some code to prevent needless null inserts if interpolating sascha@418: over large gaps. sascha@418: ingo@417: 2009-12-21 Ingo Weinzierl ingo@417: ingo@417: * src/main/java/de/intevation/gnv/chart/HorizontalCrossProfileChart.java: ingo@417: Removed warning, which told the user that gap detection is not implemented ingo@417: yet. ingo@417: ingo@416: 2009-12-21 Ingo Weinzierl ingo@416: ingo@416: * src/main/java/de/intevation/gnv/state/profile/horizontal/HorizontalProfileMeshCrossOutputState.java, ingo@416: src/main/java/de/intevation/gnv/math/Interpolation2D.java: Add 'null' ingo@416: values for gap detection to result collection instead of omitting them. ingo@416: ingo@416: * src/main/java/de/intevation/gnv/chart/VerticalProfileChart.java, ingo@416: src/main/java/de/intevation/gnv/statistics/TimeseriesStatistics.jav: ingo@416: Handle null values - don't throw an exception. ingo@416: sascha@375: 2009-12-17 Sascha L. Teichmann sascha@375: sascha@375: RELEASE 0.3 sascha@375: sascha@375: * Changes, NEWS, ChangeLog: Summarized activities sascha@375: sascha@374: 2009-12-17 Sascha L. Teichmann sascha@374: sascha@374: * doc/conf/conf.xml: Bind REST server to localhost. sascha@374: sascha@372: 2009-12-17 Sascha L. Teichmann sascha@372: sascha@372: * src/test/ressources/lang/artifactMessages_de_DE.properties, sascha@373: src/main/resources/lang/artifactMessages_de_DE.properties, sascha@373: src/main/resources/lang/artifactMessages_de.properties: sascha@372: s/Modeldaten/Modelldaten sascha@372: sascha@371: 2009-12-17 Sascha L. Teichmann sascha@371: sascha@371: * src/main/resources/lang/artifactMessages_de_DE.properties, sascha@371: src/main/resources/lang/artifactMessages_de.properties: Removed sascha@371: wkt line strings. sascha@371: sascha@371: 2009-12-17 Ingo Weinzierl ingo@370: ingo@370: * doc/conf/queries.properties: Added K-position to sql statement for ingo@370: verticalprofile charts on meshes. ingo@370: ingo@370: * src/main/java/de/intevation/gnv/chart/VerticalProfileChart.java, ingo@370: src/main/java/de/intevation/gnv/chart/HorizontalProfileChart.java: Changed ingo@370: the depending axis for gap detection on meshes for verticalprofile charts. ingo@370: sascha@371: 2009-12-17 Ingo Weinzierl sascha@371: sascha@371: Issue 106 ingo@369: ingo@369: * src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContextFactory.java: ingo@369: Fixed a file-leak bug while reading chart template. Sourced parsing of xml ingo@369: file out to XMLUtils of de.intevation.artifactdatabase.XMLUtils. ingo@369: ingo@368: 009-12-17 Ingo Weinzierl ingo@368: ingo@368: * src/main/java/de/intevation/gnv/state/profile/horizontal/HorizontalProfileOutputState.java, ingo@368: src/main/java/de/intevation/gnv/state/profile/vertical/VerticalProfileOutputState.java, ingo@368: src/main/java/de/intevation/gnv/state/timeseries/TimeSeriesOutputState.java: ingo@368: Added column labels for csv export. ingo@368: hans@367: 2009-12-17 Hans Plum hans@367: tim@461: Issue 129: Release 0.2: Verbesserung der �bersetzungen hans@367: hans@367: * src/main/resources/lang/artifactMessages_de_DE.properties, hans@367: src/main/resources/lang/artifactMessages_de.properties: hans@367: Fixed i18n strings for german language hans@367: sascha@366: 2009-12-16 Sascha L. Teichmann sascha@366: sascha@366: * src/main/java/de/intevation/gnv/math/Interpolation2D.java: sascha@366: Fixed index error in i-gab detection between neighbors. sascha@366: ingo@365: 2009-12-16 Ingo Weinzierl ingo@365: ingo@365: * src/main/java/de/intevation/gnv/state/profile/horizontal/HorizontalProfileMeshCrossOutputState.java: ingo@365: Override method to create chart. Fixed some bugs for interpolation. ingo@365: ingo@365: * src/main/java/de/intevation/gnv/chart/HorizontalCrossProfileChart.java: ingo@365: Chart class for generating horizontal crossprofile charts. Horizontal ingo@365: crossprofile charts are a subclass of horizontal profile charts. ingo@365: ingo@365: * src/main/java/de/intevation/gnv/math/Point2d.java: Changed epsilon value. ingo@365: ingo@365: * src/main/java/de/intevation/gnv/math/Interpolation2D.java: Fixed some bugs ingo@365: regarding buffer size to limit data for interpolation. ingo@365: ingo@365: TODO: At the moment, there is no gap detection for horizontal crossprofile ingo@365: charts. ingo@365: ingo@364: 2009-12-16 Ingo Weinzierl ingo@364: ingo@364: Issue100 ingo@364: ingo@364: * src/main/java/de/intevation/gnv/chart/TimeSeriesChart.java, ingo@364: src/main/java/de/intevation/gnv/chart/VerticalProfileChart.java, ingo@364: src/main/java/de/intevation/gnv/chart/AbstractXYLineChart.java: ingo@364: Workarround: Store information about max range of data for each parameter ingo@364: while iterating over all data values. Set the max range at the end of ingo@364: chart generation. ingo@364: ingo@364: NOTE: NumberAxis.setAutoRange(true) doesn't seem to work properly. ingo@364: ingo@363: 2009-12-16 Ingo Weinzierl ingo@363: ingo@363: * src/main/java/de/intevation/gnv/state/profile/verticalcrosssection/VerticalCrossSectionOutputState.java: ingo@363: Removed useless import of VerticalCrossSectionChartFactory. ingo@363: ingo@363: * src/main/java/de/intevation/gnv/chart/HorizontalCrossSectionChartFactory.java, ingo@363: src/main/java/de/intevation/gnv/chart/VerticalProfileChartFactory.java, ingo@363: src/main/java/de/intevation/gnv/chart/VerticalCrossSectionChartFactory.java, ingo@363: src/main/java/de/intevation/gnv/chart/HorizontalProfileChartFactory.java, ingo@363: src/main/java/de/intevation/gnv/chart/ChartFactory.java: Removed useless ingo@363: chart factory classes. ingo@363: sascha@362: 2009-12-16 Sascha L. Teichmann sascha@362: sascha@362: * src/main/java/de/intevation/gnv/utils/DistanceCalculator.java: sascha@362: Added method to calculate distance of path. sascha@362: TODO: Move this class into math package and and add sascha@362: an slerp interpolator so it can be used as a metric inside sascha@362: the interpolation code. sascha@362: sascha@362: * src/main/java/de/intevation/gnv/state/profile/horizontal/HorizontalProfileMeshCrossOutputState.java: sascha@362: Added code to disassemble the incoming result set, interpolate sascha@362: along a given path and returns an adjusted result set. sascha@362: The (i, j) got lost on this track because we don't travel along sascha@362: the main axis of the grid any more. The test for gaps has to be sascha@362: adjusted because, because the dx/dy on the path depends on how sascha@362: many steps are made on the way [*]. This is controlled by the system sascha@362: property 'interpolation.step.width'. It is set in meters sascha@362: and defaults to 100m. TODO: This should be configurable sascha@362: in the conf.xml file. sascha@362: sascha@362: [*] I opt strongly for integration of the outlier test based gap sascha@362: detection to overcome this problem. sascha@362: sascha@361: 2009-12-15 Sascha L. Teichmann sascha@361: sascha@361: * src/main/java/de/intevation/gnv/math/LinearToMap.java: sascha@361: Uses JTS Coordinate as geometry model now. sascha@361: sascha@361: * src/main/java/de/intevation/gnv/math/Metrics.java, sascha@361: src/main/java/de/intevation/gnv/math/Interpolator.java: New. sascha@361: Moved from inner class of LinearToMap to top level class sascha@361: to be more reusable. Uses JTS Coordinate as geometry model now. sascha@361: sascha@361: * src/main/java/de/intevation/gnv/math/Point2d.java: New. sascha@361: Extends JTS Coordinate to have an additional (i, j) sascha@371: to model the topological neighborhood within the mesh, too. sascha@361: sascha@361: * src/main/java/de/intevation/gnv/math/Interpolation2D.java: New. sascha@361: Has a method interpolate() which takes a path line string in form sascha@361: of a list of JTS Coordinates, a list of grid points (Point2d sascha@361: to carry the topology, too), a linear range in diagram coordinate sascha@361: space, a metric to cope with the projection. It reports sascha@361: interpolated points to an implementor of the new inner interface sascha@361: Consumer as a JTS Coordinate. (x, y) of this coordinate is the sascha@361: postion on the map, the z value is the interpolated attribute. sascha@361: sascha@361: To speed up the search for the neighbors the input points are sascha@361: sorted into a quadtree and are queried first level with a buffer of sascha@361: size (max(abs(p[i].x - p[i+1].x)), max(abs(p[i].y - p[i+1].y))) sascha@361: around the point to be interpolated. The second level filter sascha@361: is performed by an inverse L1-ordering with region coding, so sascha@361: that only the nearest four neighbors are taken into acount. sascha@361: Only if all four neighbors are present and no sascha@361: i- or j-gaps exist the interpolation is performed. TODO: Create sascha@361: a better extrapolation strategy in these cases were these conditions sascha@361: are not fulfilled. sascha@361: sascha@361: * src/main/java/de/intevation/gnv/state/profile/horizontal/HorizontalProfileMeshCrossOutputState.java: sascha@361: Added a process() method to perform the interpolation. It does sascha@361: nothing by now. TODO: bring it to life. sascha@361: sascha@360: 2009-12-15 Sascha L. Teichmann sascha@360: sascha@360: * src/main/java/de/intevation/gnv/math/LinearToMap.java: Map linear sascha@360: coordinates (from, to) to world coordinates (x, y) along a line string sascha@360: given by a set of java.awt.geom.Point2D points. sascha@360: sascha@360: * src/main/java/de/intevation/gnv/math/LinearMetrics.java: Implements sascha@360: Euclidean metric used by LinearToMap. TODO: Do same for WGS84 to sascha@360: be more precise. sascha@360: tim@359: 2009-12-15 Tim Englich tim@359: sascha@360: * src/main/java/de/intevation/gnv/statistics/TimeseriesStatistics.java (calculateStatistics): tim@359: Issue96 Resloved big that one entry is missiing in the Statitic. tim@359: The last row of the ResultSet was never used. tim@359: ingo@358: 2009-12-15 Ingo Weinzierl ingo@358: ingo@358: Issue106 ingo@358: ingo@358: * doc/conf/conf.xml: Added charttemplate to global configuration. ingo@358: ingo@358: * src/main/java/de/intevation/gnv/utils/ArtifactXMLUtilities.java: Made ingo@358: method static to call it without initiating an object of its class. ingo@358: ingo@358: * src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContextFactory.java: ingo@358: Create ChartTheme at startup of artifact server and put it into global ingo@358: context. The theme is created one time on this way. ingo@358: ingo@358: * src/main/java/de/intevation/gnv/state/OutputState.jav, ingo@358: src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java: Changed ingo@358: signature of 'out'-method. Call 'out' with CallContext instead of ingo@358: CallMeta, which is contained in CallContext. CallContext is needed to ingo@358: fetch the ChartTheme out of it. ingo@358: ingo@358: * src/main/java/de/intevation/gnv/state/profile/horizontalcrosssection/HorizontalCrossSectionMeshOutputState.java, ingo@358: src/main/java/de/intevation/gnv/state/profile/verticalcrosssection/VerticalCrossSectionOutputState.java, ingo@358: src/main/java/de/intevation/gnv/state/profile/horizontal/HorizontalProfileOutputState.java, ingo@358: src/main/java/de/intevation/gnv/state/profile/vertical/VerticalProfileOutputState.java: ingo@358: Changed signature of 'getChart'-method which now gets the CallContext ingo@358: containing the ChartTheme. ingo@358: ingo@358: * src/main/java/de/intevation/gnv/state/timeseries/TimeSeriesOutputState.java: ingo@358: Get ChartTheme from CallContext instead of reading the XML file here. ingo@358: sascha@357: 2009-12-15 Sascha L. Teichmann sascha@357: sascha@357: * src/main/java/de/intevation/gnv/state/profile/horizontal/HorizontalProfileMeshCrossOutputState.java: sascha@357: If a few (i, j) values are not available (gaps in the grid) try sascha@357: to fill the holes with guessing the values by the ones which could sascha@357: be fetched. We are using a componentwise linear function here. sascha@357: This is surely slightly wrong because world coordinates are sascha@357: in WGS84 which is ellipsoid in nature. TODO: Look at the errors sascha@357: and if needed compensate them by using cubic polynonial or ellipsoid sascha@357: function terms. sascha@357: sascha@357: * src/main/java/de/intevation/gnv/math/LinearFunction.java: New. sascha@357: Linear function to be used in curve fitting process. sascha@357: tim@356: 2009-12-15 Tim Englich tim@356: tim@356: * doc/conf/queries.properties: tim@356: Added the Unit of the Parameter to the Query for Parameters in tim@356: all Parameterqueries where it was still missing. Now the Unit will tim@356: be displaied in the Combobox and in the Diagramm-Axis-Description. tim@356: sascha@354: 2009-12-15 Sascha L. Teichmann sascha@354: sascha@354: * pom.xml: Upgraded to Apache Commons Math 2.0. Needed for sascha@354: curve fitting (splines e.g) sascha@354: sascha@354: * src/main/java/de/intevation/gnv/statistics/TimeseriesStatistics.java: sascha@354: Use 'new DescriptiveStatistics()' instead of sascha@354: 'DescriptiveStatistics().newInstance()' to be compatible with new sascha@354: math api. sascha@354: tim@352: 2009-12-15 Tim Englich sascha@357: sascha@357: Added the Unit of the Parameter to the Query for Parameters in sascha@357: TimeSeries. Now teh Unit will be displaied in the Combobox and sascha@357: in the Diagramm-Axis-Description. sascha@357: tim@353: * src/main/resources/lang/artifactMessages*.properties: tim@353: Added the name Productname for "horizontale Schnittprofile". to the tim@353: Resources so that it could be displaied properly in the GUI sascha@354: tim@353: 2009-12-15 Tim Englich tim@353: sascha@354: * src/main/resources/lang/artifactMessages*.properties: sascha@354: Added the required Resources for the Outputelements of "horizontale Schnittprofile". sascha@354: * doc/conf/queries.properties: sascha@354: Added the specialized Queries for getting the Data and the depths for sascha@354: generating "horizontale Schnittprofile". sascha@354: * src/main/java/de/intevation/gnv/state/profile/horizontal/HorizontalProfileMeshCrossOutputState.java (log): sascha@354: Added an new OutputTransition to handle the special Way to d detremine the required sascha@354: Data for generating "horizontale Schnittprofile". sascha@354: * doc/conf/conf.xml, sascha@354: doc/conf/products/horizontalprofile/conf_mesh_cross.xml, sascha@354: src/main/java/de/intevation/gnv/profile/horizontal/HorizontalProfileMeshCrossArtifact.java: sascha@354: Added Support for "Horizontales Schnittprofil"-Artifacts to the Project sascha@354: ingo@351: 2009-12-15 Ingo Weinzierl ingo@351: ingo@351: Issue102 ingo@351: ingo@351: * src/main/java/de/intevation/gnv/chart/AbstractXYLineChart.java: ingo@351: Reset 'nextColor' at the beginning of chart creation. Now, color of lines ingo@351: in charts are stable, which means, that an export will look like the chart ingo@351: in the gui itself. ingo@351: ingo@350: 2009-12-14 Ingo Weinzierl ingo@350: ingo@350: Issue101 ingo@350: ingo@350: * src/main/java/de/intevation/gnv/chart/TimeSeriesChart.java: Changed date ingo@350: representation in timeseries charts. Date format is sourced out to ingo@350: ressource files. German date representation is now 'dd-MMM-yyyy' (eg ingo@350: 31-12-2009) and the english date representation is 'yyyy-MMM-dd' (eg ingo@350: 2009-12-31). ingo@350: ingo@350: * src/main/resources/lang/artifactMessages.properties, ingo@350: src/main/resources/lang/artifactMessages_de_DE.properties, ingo@350: src/main/resources/lang/artifactMessages_en.properties, ingo@350: src/main/resources/lang/artifactMessages_de.properties: Added date format ingo@350: strings for timeseries charts. ingo@350: sascha@349: 2009-12-14 Sascha L. Teichmann sascha@349: sascha@349: * src/main/java/de/intevation/gnv/utils/IndexBuffer.java: sascha@349: Creates SQL-WHERE clauses for buffers around a list of sascha@349: line segments in index (i, j) space. sascha@349: ingo@348: 2009-12-11 Ingo Weinzierl ingo@348: ingo@348: * src/main/java/de/intevation/gnv/state/profile/horizontal/HorizontalProfileOutputState.java: ingo@348: Exception handling while creating subtitle of horizontalprofile charts. ingo@348: Included the case, that there is no start and no end date. ingo@348: sascha@347: 2009-12-11 Sascha L. Teichmann sascha@347: sascha@347: * src/test/java/de/intevation/gnv/artifacts/TimeSeriesPointTimeSeriesTestCase.java, sascha@347: src/main/java/de/intevation/gnv/chart/TimeSeriesChart.java: sascha@347: Removed needless imports. sascha@347: tim@345: 2009-12-11 Tim Englich tim@345: tim@346: * doc/conf/queries.properties: tim@346: Added Z-Value to verticalcrosssection_mesh_chart_data. tim@346: tim@346: 2009-12-11 Tim Englich sascha@347: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCaseBase.java, sascha@347: src/test/java/de/intevation/gnv/artifacts/InstantaneousPointHorizontalProfileTestCase.java, sascha@347: src/test/java/de/intevation/gnv/artifacts/InstantaneousPointVerticalProfileTestCase.java, sascha@347: src/test/java/de/intevation/gnv/artifacts/MeshHorizontalCrossSectionTestCase.java, sascha@347: src/test/java/de/intevation/gnv/artifacts/MeshHorizontalProfileTestCase.java, sascha@347: src/test/java/de/intevation/gnv/artifacts/MeshTimeSeriesTestCase.java, sascha@347: src/test/java/de/intevation/gnv/artifacts/MeshVerticalCrossSectionTestCase.java, sascha@347: src/test/java/de/intevation/gnv/artifacts/TimeSeriesPointTimeSeriesTestCase.java, sascha@347: src/test/java/de/intevation/gnv/artifacts/TimeSeriesPointVerticalProfileTestCase.java, sascha@347: src/test/java/de/intevation/gnv/artifacts/MeshVerticalProfileTestCase.java: sascha@347: Split all Unittestcases in separat Classes. Now it is easier to uses the UnitTests with Maven. sascha@347: ingo@344: 2009-12-11 Ingo Weinzierl ingo@344: ingo@344: * src/main/java/de/intevation/gnv/chart/AbstractXYLineChart.java: Fade out ingo@344: gridlines of range axis in charts if there are more than one axis. ingo@344: ingo@343: 2009-12-11 Ingo Weinzierl ingo@343: ingo@343: * src/main/resources/lang/artifactMessages.properties, ingo@343: src/main/resources/lang/artifactMessages_de_DE.properties, ingo@343: src/main/resources/lang/artifactMessages_en.properties, ingo@343: src/main/resources/lang/artifactMessages_de.properties: Added axis labels ingo@343: for horizontalprofile, verticalprofile, horizontalcrosssection and ingo@343: verticalcrosssection charts. ingo@343: ingo@343: * src/main/java/de/intevation/gnv/state/profile/horizontalcrosssection/HorizontalCrossSectionMeshOutputState.java, ingo@343: src/main/java/de/intevation/gnv/state/profile/verticalcrosssection/VerticalCrossSectionOutputState.java, ingo@343: src/main/java/de/intevation/gnv/state/profile/horizontal/HorizontalProfileOutputState.java, ingo@343: src/main/java/de/intevation/gnv/state/profile/vertical/VerticalProfileOutputState.java: ingo@343: Read axis labels from ressources instead of hard coded strings in code. ingo@343: ingo@342: 2009-12-11 Ingo Weinzierl ingo@342: ingo@342: Cleared Issue104. ingo@342: ingo@342: * src/main/resources/lang/artifactMessages.properties, ingo@342: src/main/resources/lang/artifactMessages_de_DE.properties, ingo@342: src/main/resources/lang/artifactMessages_en.properties, ingo@342: src/main/resources/lang/artifactMessages_de.properties: Added axis label ingo@342: for timeseries charts. ingo@342: ingo@342: * src/main/java/de/intevation/gnv/state/timeseries/TimeSeriesOutputState.java: ingo@342: Removed hard coded axis label of timeseries charts. Read label from ingo@342: ressources. ingo@342: ingo@341: 2009-12-09 Ingo Weinzierl ingo@341: ingo@341: * src/main/java/de/intevation/gnv/chart/VerticalProfileChart.java, ingo@341: src/main/java/de/intevation/gnv/chart/HorizontalProfileChart.java: Added ingo@341: gap detection for horizontal and vertical profile charts. ingo@341: sascha@339: 2009-12-09 Sascha L. Teichmann sascha@339: sascha@339: * doc/conf/conf.xml: Expanded the time to live of inactive artifacts sascha@339: to 3600000ms (= 1h). Dead artifacts are removed from databasse sascha@339: only every 15mins now. Improved the description on the artifact sascha@339: factories. sascha@339: tim@337: 2009-12-08 Tim Englich tim@337: tim@338: * doc/conf/queries.properties: tim@338: Added the Unit of the Parameter to the Query for Parameters in tim@338: TimeSeries. Now teh Unit will be displaied in the Combobox and tim@338: in the Diagramm-Axis-Description. tim@338: tim@338: 2009-12-08 Tim Englich tim@337: * src/main/java/de/intevation/gnv/transition/profile: tim@337: Removed empty needless package. tim@337: * src/main/java/de/intevation/gnv/transition/TransitionFactory.java: tim@337: src/main/java/de/intevation/gnv/transition/ValueCompareTransition.java, tim@337: src/main/java/de/intevation/gnv/transition/TransitionBase.java, tim@337: src/main/java/de/intevation/gnv/transition/Transition.java, tim@337: src/main/java/de/intevation/gnv/transition/DefaultTransition.java: tim@337: The new Transitions which has the only job to provide the connectios between tim@337: the different States and look if it is Possible to go the different Ways. tim@337: * src/main/java/de/intevation/gnv/state/StateBase.java, tim@337: src/main/java/de/intevation/gnv/state/State.java: tim@337: Removed the Logic to descide which State is be reacable as next. tim@337: Now the Transition configured in the Artifacts will do that according tim@337: to the modified TransitionModel. tim@337: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java (transitions): tim@337: Added the Transitions to the Artifact and changed the Logic. tim@337: Now the Transition is able to decide if it could be uses or not. tim@337: * doc/conf/products/verticalprofile/*.xml: tim@337: Modified the Configuration. Splitted States and Transitions into tim@337: different XML-Fragments according to the modified Transitionmodel. tim@337: ingo@336: 2009-12-08 Ingo Weinzierl ingo@336: ingo@336: * doc/conf/queries.properties: Added marker ('DATAID') for different data ingo@336: sources. ingo@336: tim@335: 2009-12-08 Tim Englich tim@335: tim@335: * doc/conf/products/*.xml: tim@335: Switched all Package and Classnames to the new Names. tim@335: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java: tim@335: Switched Imports from de.intevation.gnv.transition to de.intevation.gnv.state tim@335: and renamed all Mebers and local Variables from *transition* to *state* tim@335: * src/main/java/de/intevation/gnv/utils/ArtifactXMLUtilities.java: tim@335: Changed the Class for the loggeer from TimeseriesoutputTransition tim@335: to ArtifactXMLUtilities because it was wrong. tim@335: * src/main/java/de/intevation/gnv/artifacts/fis/FISArtifact.java, tim@335: src/main/java/de/intevation/gnv/artifacts/fis/product/DefaultProduct.java, tim@335: src/main/java/de/intevation/gnv/artifacts/fis/product/Product.java, tim@335: src/main/java/de/intevation/gnv/statistics/VerticalProfileStatistics.java, tim@335: src/main/java/de/intevation/gnv/statistics/TimeseriesStatistics.java, tim@335: src/main/java/de/intevation/gnv/statistics/Statistics.java, tim@335: src/main/java/de/intevation/gnv/statistics/HorizontalProfileStatistics.java, tim@335: src/main/java/de/intevation/gnv/exports/SimpleOdvDataCollector.java, tim@335: src/main/java/de/intevation/gnv/exports/ShapeDataCollector.java, tim@335: src/main/java/de/intevation/gnv/exports/Export.java, tim@335: src/main/java/de/intevation/gnv/exports/DefaultExport.java, tim@335: src/main/java/de/intevation/gnv/exports/DefaultDataCollector.java, tim@335: src/main/java/de/intevation/gnv/chart/VerticalProfileChartFactory.java, tim@335: src/main/java/de/intevation/gnv/chart/VerticalProfileChart.java, tim@335: src/main/java/de/intevation/gnv/chart/VerticalCrossSectionChartFactory.java, tim@335: src/main/java/de/intevation/gnv/chart/TimeSeriesChart.java, tim@335: src/main/java/de/intevation/gnv/chart/HorizontalProfileChartFactory.java, tim@335: src/main/java/de/intevation/gnv/chart/HorizontalCrossSectionChartFactory.java, tim@335: src/main/java/de/intevation/gnv/chart/ChartFactory.java, tim@335: src/main/java/de/intevation/gnv/chart/AbstractXYLineChart.java: tim@335: Changed import from de.intevation.gnv.transition.* to de.intevation.gnv.state.* tim@335: according to refactoring Work in the Transitionsmodel. tim@335: * de.intevation.gnv.transition.* tim@335: Moved to de.intevation.gnv.state.* tim@335: and renamed all Mebers, local Variables, and Methodsignatures from *transition* to *state* tim@335: ingo@334: 2009-12-07 Ingo Weinzierl ingo@334: ingo@334: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java: ingo@334: Remove unselected parameters from parameters list before initiating ingo@334: charts. Parameter names are used as axis labels. ingo@334: ingo@334: * src/main/java/de/intevation/gnv/chart/TimeSeriesChart.java, ingo@334: src/main/java/de/intevation/gnv/chart/VerticalProfileChart.java, ingo@334: src/main/java/de/intevation/gnv/chart/HorizontalProfileChart.java: Changed ingo@334: the way of adding data to charts: same parameters are stored in the same ingo@334: dataset. Now, each parameter has only one axis. Axes and renderer are ingo@334: adjusted one time after collecting data - not after creating every ingo@334: single series. ingo@334: ingo@334: * src/main/java/de/intevation/gnv/chart/AbstractXYLineChart.java: Added some ingo@334: more colors to distinguish between different parameters/attributes. ingo@334: Changed method to adjust rendering options regarding the changes of ingo@334: datasets described above. ingo@334: ingo@333: 2009-12-07 Ingo Weinzierl ingo@333: ingo@333: * src/main/java/de/intevation/gnv/chart/TimeSeriesChart.java: Changed method ingo@333: generateChart to initChart, which just created a new timeseries chart. ingo@333: General chart stuff is done in AbstractXYLineChart. ingo@333: ingo@333: * src/main/java/de/intevation/gnv/chart/AbstractXYLineChart.java: Sourced ingo@333: ChartFactory call out to a new initChart method. This has been done, ingo@333: because TimeSeriesCharts needs to initiate another type of chart than ingo@333: horizontal or vertical charts. ingo@333: ingo@332: 2009-12-04 Ingo Weinzierl ingo@332: ingo@332: * src/main/java/de/intevation/gnv/artifacts/ressource/RessourceFactory.java: ingo@332: Added method to fetch a string from ressource bundle with a specified ingo@332: locale. Before, there just have been existing a method to fetch string ingo@332: from ressource bundle on basis of the first locale in a list of locales. ingo@332: ingo@332: * src/main/java/de/intevation/gnv/transition/OutputTransitionBase.java: ingo@332: Added method to fetch strings from ressource bundle from RessourceFactory ingo@332: with a specified locale, a key and a default value, if there is no string ingo@332: matching key in bundle. ingo@332: ingo@332: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java: ingo@332: Added methods for creating title and subtitle of charts. FIS name is ingo@332: fetched from ressource bundle with best locale (regarding supported server ingo@332: and client locales) instead of first locale in list of supported locales ingo@332: of the server. ingo@332: ingo@332: * src/main/java/de/intevation/gnv/transition/profile/horizontal/HorizontalProfileOutputTransition.java: ingo@332: Changed title of charts. The main title contains FIS and station name. The ingo@332: subtitle contains the time period, the cruise, the depth and the position ingo@332: of a chart. ingo@332: ingo@332: * src/main/java/de/intevation/gnv/chart/ChartLabels.java: Added subtitle as ingo@332: parameter in class and constructor. ingo@332: ingo@332: * src/main/java/de/intevation/gnv/chart/AbstractXYLineChart.java: Added a ingo@332: subtitle to charts. Titles and subtitles are stored in a ChartLabels ingo@332: object. ingo@332: ingo@332: * src/main/resources/lang/artifactMessages.properties, ingo@332: src/main/resources/lang/artifactMessages_de_DE.properties, ingo@332: src/main/resources/lang/artifactMessages_en.properties, ingo@332: src/main/resources/lang/artifactMessages_de.properties: Added strings for ingo@332: chart title. ingo@332: sascha@330: 2009-12-04 Sascha L. Teichmann sascha@330: sascha@330: * ChangeLog: Cleaned up a bit. sascha@330: ingo@329: 2009-12-02 Ingo Weinzierl ingo@329: ingo@329: * src/main/java/de/intevation/gnv/chart/TimeSeriesChart.java: Added time gap sascha@330: detection. If a time gap is detected, a null value will be inserted to ingo@329: break the current line. ingo@329: ingo@328: 2009-12-02 Ingo Weinzierl ingo@328: sascha@330: * pom.xml: Added JBoss repository for JFreeChart 1.0.13 and removed explicit ingo@328: JCommon dependency which is now needless. Now, it is no more necessary to ingo@328: install JFreeChart into the local maven repository on your own. ingo@328: ingo@327: 2009-12-02 Ingo Weinzierl ingo@327: ingo@327: * doc/conf/charttemplate.xml: Added lines to configure rendering of lines ingo@327: and points in charts (visibility of lines/points and size of points). ingo@327: ingo@327: * src/main/java/de/intevation/gnv/chart/XMLChartTheme.java: Added method ingo@327: parsing the rendering options for lines and points in charts. ingo@327: ingo@327: * src/main/java/de/intevation/gnv/chart/AbstractChart.java: Added boolean ingo@327: member attributes which are used to control the visibility of lines and ingo@327: points in charts. ingo@327: ingo@327: * src/main/java/de/intevation/gnv/chart/VerticalProfileChart.java, ingo@327: src/main/java/de/intevation/gnv/chart/TimeSeriesChart.java, ingo@327: src/main/java/de/intevation/gnv/chart/HorizontalProfileChart.java: ingo@327: Constructor needs two further boolean parameter to control the visibility ingo@327: of lines and points in charts. sascha@330: ingo@327: * src/main/java/de/intevation/gnv/chart/AbstractXYLineChart.java: The sascha@330: renderer controlling the style of a series is adjusted after adding a ingo@327: new series to the chart. ingo@327: ingo@327: * src/main/java/de/intevation/gnv/transition/profile/horizontalcrosssection/HorizontalCrossSectionMeshOutputTransition.java, ingo@327: src/main/java/de/intevation/gnv/transition/profile/verticalcrosssection/VerticalCrossSectionOutputTransition.jav, ingo@327: src/main/java/de/intevation/gnv/transition/profile/horizontal/HorizontalProfileOutputTransition.java, ingo@327: src/main/java/de/intevation/gnv/transition/profile/vertical/VerticalProfileOutputTransition.java, ingo@327: src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java: ingo@327: Adjusted method calls regarding the constructor changes in *Chart classes. ingo@327: ingo@327: TODO: Lines and points in charts will both always be rendered at the ingo@327: moment. This needs to be changed as soon as a new gui option is ingo@327: implemented to control the visibility of lines/points. ingo@327: tim@325: 2009-12-01 Tim Englich tim@325: sascha@330: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java: tim@326: Added one more Transitionstep to each Testcase according to the refactored Transitionmodel. tim@326: * src/test/ressources/verticalprofile/verticalprofile_step_*_advance.xml, sascha@330: src/test/ressources/verticalprofile_instantaneouspoint/verticalprofile_step_*_advance.xml, sascha@330: src/test/ressources/verticalprofile_mesh/verticalprofile_step_*_advance.xml, sascha@330: src/test/ressources/verticalcrosssection_mesh/verticalcrosssection_step_*_advance.xml, tim@326: src/test/ressources/timeseries_mesh/timeseries_step_*_advance.xml, sascha@330: src/test/ressources/timeseries/timeseries_step_*_advance.xml, sascha@330: src/test/ressources/horizontalProfile_mesh/horizontalprofile_step_*_advance.xml, sascha@330: src/test/ressources/horizontalProfile_instantaneouspoint/horizontalprofile_step_*_advance.xml, tim@326: src/test/ressources/horizontalcrosssection_mesh/horizontalcrosssection_step_*_advance.xml: tim@326: Moved each Adancedocument plus one according to the refactored Transitionmodel. sascha@330: Added the first advanced Call for the Product-Artifact sascha@330: tim@326: 2009-12-01 Tim Englich sascha@330: sascha@330: * src/main/java/de/intevation/gnv/transition/OutputTransitionBase.java: sascha@330: All Data which is required to generate the Charts is now fetched using the sascha@330: Method getChartResult. The Method advance and initialize now have nothing to do. sascha@330: sascha@330: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java (out): sascha@330: Removed the advance call because all Data which is required to generate the Charts is sascha@330: fetched using the Method getChartResult. sascha@330: * src/main/java/de/intevation/gnv/transition/profile/horizontal/NorthSouthEastWestTransition.java (initialize): sascha@330: Use Method instantiate instead of Advance to add the required Data for describe sascha@330: and feed this Transition. sascha@330: sascha@330: * src/main/java/de/intevation/gnv/transition/TransitionBase.java (initialize), sascha@330: src/main/java/de/intevation/gnv/transition/Transition.java (initialize): sascha@330: Added new Method Initaialize which will be callcall to Initailize the current sascha@330: Transition. In this step all Data will be fetched which is required to Ddescribe and sascha@330: feed each Transition. sascha@330: Also the AlternativeTransition was removed because it is not longer required. sascha@330: sascha@330: * src/main/java/de/intevation/gnv/artifacts/fis/FISArtifact.java (advance): sascha@330: Switched to the usage of the Method initialize instead of Advance while instantiating sascha@330: a new Productartifact, according to the Refactoring work wich is done in the sascha@330: TransitionModel. sascha@330: sascha@330: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java (initialize): sascha@330: Added new Function Initialize so that it is possible to Initialize an Artifact sascha@330: without doing this in the Constructor. That is nessessary because some Artifacts need sascha@330: some Metadata (e.g. SourceID) befor it can be initialized. sascha@330: sascha@330: * doc/conf/products/verticalprofile/conf_timeseriespoint.xml, sascha@330: doc/conf/products/verticalprofile/conf_mesh.xml, sascha@330: doc/conf/products/verticalprofile/conf_instantaneouspoint.xml, sascha@330: doc/conf/products/verticalcrosssection/conf_mesh.xml, sascha@330: doc/conf/products/timeseries/conf_timeseriespoint.xml, sascha@330: doc/conf/products/timeseries/conf_mesh.xml, sascha@330: doc/conf/products/horizontalprofile/conf_mesh.xml, sascha@330: doc/conf/products/horizontalprofile/conf_instantaneouspoint.xml, sascha@330: doc/conf/products/horizontalcrosssection/conf_mesh.xml: sascha@330: Some Refactoring work done according to the Refactoring Work wich sascha@330: was done in the Transitionmodel. sascha@330: ingo@324: 2009-11-30 Ingo Weinzierl ingo@324: ingo@324: * src/main/java/de/intevation/gnv/artifacts/ressource/RessourceFactory.java, ingo@324: src/main/java/de/intevation/gnv/chart/HorizontalProfileChart.java, ingo@324: src/main/java/de/intevation/gnv/transition/profile/horizontalcrosssection/HorizontalCrossSectionMeshOutputTransition.java, ingo@324: src/main/java/de/intevation/gnv/transition/profile/verticalcrosssection/VerticalCrossSectionOutputTransition.java, ingo@324: src/main/java/de/intevation/gnv/transition/profile/horizontal/HorizontalProfileOutputTransition.java, ingo@324: src/main/java/de/intevation/gnv/transition/profile/vertical/VerticalProfileOutputTransition.java: ingo@324: Removed needless imports. ingo@324: ingo@323: 2009-11-30 Ingo Weinzierl ingo@323: ingo@323: * pom.xml: Updated batik dependencies to 1.7 ingo@323: ingo@323: * src/main/java/de/intevation/gnv/exports/ChartExportHelper.java: Use ingo@323: java native DOMImplementation instead of Batik's SVGDOMImplementation, ingo@323: which is not present in batik 1.7 libs. ingo@323: ingo@322: 2009-11-30 Ingo Weinzierl ingo@322: ingo@322: * doc/conf/products/horizontalcrosssection/conf_mesh.xml, ingo@322: doc/conf/products/verticalcrosssection/conf_mesh.xml, ingo@322: doc/conf/products/timeseries/conf_mesh.xml, ingo@322: doc/conf/products/timeseries/conf_timeseriespoint.xml, ingo@322: doc/conf/products/horizontalprofile/conf_mesh.xml, ingo@322: doc/conf/products/horizontalprofile/conf_instantaneouspoint.xml, ingo@322: doc/conf/products/verticalprofile/conf_mesh.xml, ingo@322: doc/conf/products/verticalprofile/conf_timeseriespoint.xml, ingo@322: doc/conf/products/verticalprofile/conf_instantaneouspoint.xml: Added svg ingo@322: to output modes (MimeType image/svg+xml). ingo@322: ingo@322: * pom.xml: Added batik 1.6.1 dependencies which are used to create svg ingo@322: exports. ingo@322: ingo@322: * src/main/java/de/intevation/gnv/exports/ChartExportHelper.java: ingo@322: Implemented chart export to svg. ingo@322: ingo@322: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java: ingo@322: Output mode 'svg' will call svg export of ChartExportHelper. ingo@322: ingo@320: 2009-11-30 Ingo Weinzierl ingo@320: ingo@320: * pom.xm: Added iText 2.1.7 dependency (to create pdf's). ingo@320: ingo@320: * src/main/java/de/intevation/gnv/exports/ChartExportHelper.java: ingo@320: Implemented chart export to pdf using iText library. The chart fills the ingo@320: complete page. A boolean system property "export.pdf.landscape" can be ingo@320: used to adjust the page orientation (portrait or landscape, default is ingo@320: landscape). ingo@320: ingo@320: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java: ingo@320: Added method for exporting chart to pdf. Calls the new method of ingo@320: ChartExportHelper. ingo@320: tim@319: 2009-11-27 Tim Englich tim@319: sascha@330: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java tim@319: (testHorizontalProfileInstantaneousPointArtifact), tim@319: src/test/ressources/horizontalProfile_instantaneouspoint/horizontalprofile_step_*.xml: sascha@330: Added new stapes using the RegionFilter into the Tescase of HorizontalProfiles Instantaneous Point. tim@319: * src/test/ressources/verticalcrosssection_mesh/verticalcrosssection_step_08_feed.xml, sascha@330: src/test/ressources/horizontalcrosssection_mesh/horizontalcrosssection_step_06_feed.xml: tim@319: Bugfix: Removed second dateid. horizontalcrosssection and verticalcrosssection only provide the usage of one dateid. sascha@330: * doc/conf/products/horizontalprofile/conf_instantaneouspoint.xml: tim@319: Added the RegionFilters into the configuration of the Products for tim@319: Horizontalprofiles IntantaneousPoints. sascha@330: * doc/conf/queries.properties: tim@319: Query to select only Ships, Cruises, Tracks which are within an Region. sascha@330: * src/main/java/de/intevation/gnv/transition/TransitionBase.java (extractKVP): tim@319: Added Row-Number lookup for ColumnNames for Performanceimprofements. tim@319: ingo@318: 2009-11-26 Ingo Weinzierl ingo@318: ingo@318: * src/main/java/de/intevation/gnv/exports/ChartExportHelper.java: Helper sascha@330: class to export charts. Dependencies on JFreeChart and iText are capsuled sascha@330: here, no further dependencies in OutputTransitions. Export methods for ingo@318: images and pdf already implemented. ingo@318: ingo@318: * src/main/java/de/intevation/gnv/chart/Chart.java, ingo@318: src/main/java/de/intevation/gnv/chart/AbstractChart.java: Outsourcing of ingo@318: export methods to ChartExportHelper. ingo@318: ingo@318: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java: ingo@318: Adapted current export of charts. ingo@318: ingo@317: 2009-11-26 Ingo Weinzierl ingo@317: ingo@317: * doc/conf/products/horizontalcrosssection/conf_mesh.xml, ingo@317: doc/conf/products/verticalcrosssection/conf_mesh.xml, ingo@317: doc/conf/products/timeseries/conf_mesh.xml, ingo@317: doc/conf/products/timeseries/conf_timeseriespoint.xml, ingo@317: doc/conf/products/horizontalprofile/conf_mesh.xml, ingo@317: doc/conf/products/horizontalprofile/conf_instantaneouspoint.xml, ingo@317: doc/conf/products/verticalprofile/conf_mesh.xml, ingo@317: doc/conf/products/verticalprofile/conf_timeseriespoint.xml, ingo@317: doc/conf/products/verticalprofile/conf_instantaneouspoint.xml: Added pdf ingo@317: as export format. ingo@317: ingo@316: 2009-11-26 Ingo Weinzierl ingo@316: ingo@316: * TODO: Added point in TODO regarding tick units and distance between tick ingo@316: units in timeseries charts. ingo@316: ingo@315: 2009-11-26 Ingo Weinzierl ingo@315: ingo@315: * src/main/java/de/intevation/gnv/chart/AbstractXYLineChart.java: Localized sascha@330: chart axis. Two method have been added - method to localize y-axis of ingo@315: charts, abstract method to localize x-axis of charts. ingo@315: ingo@315: * src/main/java/de/intevation/gnv/chart/VerticalProfileChart.java, ingo@315: src/main/java/de/intevation/gnv/chart/TimeSeriesChart.java: Override ingo@315: abstract method to localize x-axis. ingo@315: ingo@315: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java: ingo@315: Call algorithm to determine the best locale regarding intersection of sascha@330: supported server and browser locales. This locale is used to create ingo@315: localized charts. ingo@315: ingo@314: 2009-11-26 Ingo Weinzierl ingo@314: ingo@314: * src/main/java/de/intevation/gnv/artifacts/ressource/RessourceFactory.java: ingo@314: New method getLocales() which returns an array of locales which are ingo@314: supported by the server. ingo@314: ingo@314: * src/main/resources/lang/lang.conf: Config-file for supported languages. ingo@314: The resource bundles for localized text should be configured here. It is ingo@314: used to determine the best locale regarding the supported locales by ingo@314: server and browser. ingo@314: ingo@312: 2009-11-25 Ingo Weinzierl ingo@312: ingo@312: * src/main/java/de/intevation/gnv/chart/TimeSeriesChart.java: Override ingo@312: method generateChart to instantiate TimeSeries charts instead of XY sascha@330: charts. Before these changes, timeseries charts did not have a valid date sascha@330: axis. ingo@312: ingo@311: 2009-11-24 Ingo Weinzierl ingo@310: ingo@310: * src/main/java/de/intevation/gnv/chart/VerticalProfileChart.java, ingo@310: src/main/java/de/intevation/gnv/chart/AbstractChart.java, ingo@310: src/main/java/de/intevation/gnv/chart/TimeSeriesChart.java, ingo@310: src/main/java/de/intevation/gnv/chart/HorizontalProfileChart.java: Added ingo@310: timegap definitions, adapted constructors. ingo@310: ingo@310: * src/main/java/de/intevation/gnv/transition/profile/horizontalcrosssection/HorizontalCrossSectionMeshOutputTransition.java, ingo@310: src/main/java/de/intevation/gnv/transition/profile/verticalcrosssection/VerticalCrossSectionOutputTransition.java, ingo@310: src/main/java/de/intevation/gnv/transition/profile/horizontal/HorizontalProfileOutputTransition.java, ingo@310: src/main/java/de/intevation/gnv/transition/profile/vertical/VerticalProfileOutputTransition.java, ingo@310: src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java: ingo@310: Adapted creation of charts regarding changes of constructors. ingo@310: tim@309: 2009-11-24 Tim Englich tim@309: sascha@330: * src/test/ressources/verticalprofile_mesh/verticalprofile_step_10_feed.xml, sascha@330: src/test/ressources/verticalcrosssection_mesh/verticalcrosssection_step_08_feed.xml, sascha@330: src/test/ressources/timeseries_mesh/timeseries_step_08_feed.xml, sascha@330: src/test/ressources/horizontalProfile_mesh/horizontalprofile_step_10_feed.xml, sascha@330: src/test/ressources/horizontalcrosssection_mesh/horizontalcrosssection_step_06_feed.xml, sascha@330: src/test/ressources/timeseries/timeseries_step_06_out_chart.xml: sascha@330: Added new Timevalues because the Data in the DWH has changed. sascha@330: ingo@308: 2009-11-24 Ingo Weinzierl ingo@308: sascha@330: * pom.xml: Added dependencies for esri and ibm libraries required for unit ingo@308: tests. ingo@308: tim@306: 2009-11-24 Tim Englich tim@306: sascha@330: * src/test/ressources/timeseries/timeseries_step_06_out_chart.xml: tim@307: Added mime-type to get a propper output-result and not an NPE sascha@330: * src/main/java/de/intevation/gnv/chart/AbstractXYLineChart.java (findValueTitle): tim@307: Added null-value check to prevent NPEs. tim@307: * src/main/java/de/intevation/gnv/transition/profile/verticalcrosssection/VerticalCrossSectionOutputTransition.java (getChart), tim@307: src/main/java/de/intevation/gnv/transition/profile/vertical/VerticalProfileOutputTransition.java (getChart), sascha@330: src/main/java/de/intevation/gnv/transition/profile/horizontalcrosssection/HorizontalCrossSectionMeshOutputTransition.java (getChart), sascha@330: src/main/java/de/intevation/gnv/transition/profile/horizontal/HorizontalProfileOutputTransition.java (getChart): tim@307: Changed Method-Signature to this one which the base method provide. tim@307: Now the Methods will be used again. tim@307: tim@307: 2009-11-24 Tim Englich sascha@330: sascha@330: * src/test/java/de/intevation/gnv/artifacts/TestCallContext.java (TestCallContext): sascha@330: Removed Compilationerrors that were triggert by API-Changes in tim@306: Module Artifact-Database. sascha@330: tim@306: * doc/conf/queries.properties, sascha@330: doc/conf/products/timeseries/conf_mesh.xml: sascha@330: Removed Meshpoint from SQL-Query because the same value will be tim@306: insert by using the depthid. tim@306: depthid on layer 1 = featureid tim@306: In the old configuration only Charts on Layer 1 were drawn. tim@306: issue91 tim@306: ingo@305: 2009-11-23 Ingo Weinzierl ingo@305: ingo@305: * src/main/java/de/intevation/gnv/transition/OutputTransitionBase.java: ingo@305: Remove chart from cache when data which is displayed has changed. ingo@305: ingo@304: 2009-11-23 Ingo Weinzierl ingo@304: ingo@304: * doc/conf/charttemplate.xml: Added configuration file for chart themes. ingo@304: ingo@304: * src/main/java/de/intevation/gnv/chart/XMLChartTheme.java: Theme class for ingo@304: reading xml files which describe chart styles. It extends the ingo@304: StandardChartTheme class of JFreeChart which defines default values for ingo@304: chart parameters. It is possible to apply different xml configurations for ingo@304: different charts. ingo@304: ingo@304: * src/main/java/de/intevation/gnv/chart/AbstractXYLineChart.java, ingo@304: src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java: sascha@330: Before creating a new chart, an instance of XMLChartTheme is initialized ingo@304: which is responsible for the chart style. ingo@304: ingo@304: NOTE: 'charttemplate.xml' is used by artifact server and has to be placed ingo@304: in the config directory. ingo@304: ingo@303: 2009-11-20 Ingo Weinzierl ingo@303: ingo@303: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java: ingo@303: Export format of charts (png, jpeg, gif) depends on mime-type. ingo@303: ingo@303: * src/main/java/de/intevation/gnv/chart/Chart.java, ingo@303: src/main/java/de/intevation/gnv/chart/AbstractChart.java: Renamed export ingo@303: method, because it doesn't export just png anymore, but jpeg or gif as ingo@303: well. ingo@303: ingo@302: 2009-11-20 Ingo Weinzierl ingo@302: ingo@302: * src/test/ressources/horizontalProfile_instantaneouspoint/horizontalprofile_step_06_out_chart.xml, ingo@302: src/test/ressources/verticalprofile_instantaneouspoint/verticalprofile_step_05_out_chart.xml, ingo@302: src/test/ressources/horizontalcrosssection_mesh/horizontalcrosssection_step_06_out_chart.xml, ingo@302: src/test/ressources/verticalcrosssection_mesh/verticalcrosssection_step_08_out_chart.xml, ingo@302: src/test/ressources/timeseries_mesh/timeseries_step_08_out_chart.xml, ingo@302: src/test/ressources/horizontalProfile_mesh/horizontalprofile_step_10_out_chart.xml, ingo@302: src/test/ressources/verticalprofile_mesh/verticalprofile_step_10_out_chart.xml, ingo@302: src/test/ressources/verticalprofile/verticalprofile_step_06_out_chart.xml: ingo@302: Removed mistake in xml structure of artifact protocol. Mime-type node was ingo@302: called 'out' instead of 'mime-type'. ingo@302: ingo@301: 2009-11-20 Ingo Weinzierl ingo@301: ingo@301: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java, ingo@301: src/main/java/de/intevation/gnv/chart/VerticalProfileChart.java, ingo@301: src/main/java/de/intevation/gnv/chart/AbstractXYLineChart.java, ingo@301: src/main/java/de/intevation/gnv/chart/AbstractChart.java, ingo@301: src/main/java/de/intevation/gnv/exports/Export.java, ingo@301: src/main/java/de/intevation/gnv/exports/ShapeDataCollector.java, ingo@301: src/main/java/de/intevation/gnv/exports/SimpleOdvDataCollector.java, ingo@301: src/main/java/de/intevation/gnv/exports/DefaultProfile.java, ingo@301: src/main/java/de/intevation/gnv/exports/DefaultExport.java, ingo@301: src/main/java/de/intevation/gnv/transition/profile/horizontalcrosssection/HorizontalCrossSectionMeshOutputTransition.java, ingo@301: src/main/java/de/intevation/gnv/transition/profile/horizontal/HorizontalProfileOutputTransition.java, ingo@301: src/main/java/de/intevation/gnv/transition/profile/vertical/VerticalProfileOutputTransition.java, ingo@301: src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java: ingo@301: Removed duplicated and needless imports. ingo@301: ingo@300: 2009-11-20 Ingo Weinzierl ingo@300: ingo@300: * src/main/java/de/intevation/gnv/transition/OutputTransitionBase.java: ingo@300: Added methods for caching charts. ingo@300: ingo@300: * src/main/java/de/intevation/gnv/transition/profile/horizontal/HorizontalProfileOutputTransition.java, ingo@300: src/main/java/de/intevation/gnv/transition/profile/vertical/VerticalProfileOutputTransition.java, ingo@300: src/main/java/de/intevation/gnv/transition/profile/horizontalcrosssection/HorizontalCrossSectionMeshOutputTransition.java, ingo@300: src/main/java/de/intevation/gnv/transition/profile/verticalcrosssection/VerticalCrossSectionOutputTransition.java, ingo@300: src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java: ingo@300: Changed chart generation. Charts will now be generated in a central place ingo@300: in TimeSeriesOutputTransition which is the parent class of other ingo@300: OutputTransitions. Each OutputTransition got a new method to serve its own ingo@300: special chart class. ingo@300: ingo@300: * TODO: Added hint for caching charts. Verticalcrosssection and ingo@300: orizontalcrosssection charts aren't implemented yet. ingo@300: sascha@330: NOTE: Charts can be cached. This could be useful if the user exports ingo@300: charts as svg, png or pdf. The caching of charts is configured via system ingo@300: property 'cache.chart' at the moment. ingo@300: ingo@300: 2009-11-19 Ingo Weinzierl ingo@300: ingo@300: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java, ingo@300: src/main/java/de/intevation/gnv/transition/OutputTransition.java, ingo@300: src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java: ingo@300: Changed parameter of 'out'-method of OutputTransition. Now, the ingo@300: OutputTransition gets the complete xml document of the request (before ingo@300: just the target name). The mime type of this xml ist used to distinguish ingo@300: between different output formats of charts (png, jpeg). ingo@300: ingo@298: 2009-11-19 Ingo Weinzierl ingo@298: ingo@298: * src/main/java/de/intevation/gnv/chart/TimeSeriesChart.java, ingo@298: src/main/java/de/intevation/gnv/chart/VerticalProfileChart.java, ingo@298: src/main/java/de/intevation/gnv/chart/HorizontalProfileChart.java: ingo@298: Classes for creating charts of different output transitions, inherit from ingo@298: AbstractXYLineChart. The subclasses should only implement special code. ingo@298: General configurations should be done in AbstractChart or ingo@298: AbstractXYLineChart. ingo@298: ingo@298: TODO: Take care of gaps between two values. ingo@298: ingo@297: 2009-11-19 Ingo Weinzierl ingo@297: ingo@297: * src/main/java/de/intevation/gnv/chart/Chart.java: Interface, which ingo@297: declares basic method to create charts and export it in different formats. ingo@297: ingo@297: * src/main/java/de/intevation/gnv/chart/AbstractChart.java, sascha@330: src/main/java/de/intevation/gnv/chart/AbstractXYLineChart.java: Abstract ingo@297: chart classes which declare basic methods for chart creation and implement ingo@297: general methods used by subclasses. ingo@297: ingo@297: 2009-11-19 Ingo Weinzierl ingo@297: ingo@297: * src/main/java/de/intevation/gnv/utils/DistanceCalculator.java: Declared a ingo@297: method as static, which can be used without instantiating an object of its ingo@297: class. ingo@297: ingo@295: 2009-11-17 Ingo Weinzierl ingo@295: ingo@295: * pom.xml: Changed version of JFreeChart from 1.0.12 to 1.0.13 and added ingo@295: dependency of JCommon 1.0.15, which is used by JFreeChart. ingo@295: sascha@330: NOTE: The JFreeChart 1.0.13 jar has to be installed on your own for the ingo@295: time the central maven repository is broken. ingo@295: ingo@294: 2009-11-17 Ingo Weinzierl ingo@294: ingo@294: * pom.xml: Changed version of JFreeChart from 1.0.7 to 1.0.12, which ingo@294: includes the template mechanism to configure the style of charts. ingo@294: ingo@294: NOTE: JFreeChart 1.0.13 is the newest release, but the maven repository ingo@294: does not contain a pom.xml file. Created an issue on ingo@294: (http://jira.codehaus.org/browse/MEV-647). ingo@294: ingo@261: 2009-11-16 Ingo Weinzierl ingo@261: ingo@261: * bin/run.sh: Added start-script to version control. ingo@261: hans@260: 2009-11-13 Hans Plum hans@260: hans@260: * RELEASE 0.2: hans@260: Summarized activities in NEWS, Changes hans@260: hans@259: 2009-11-13 Hans Plum hans@259: hans@259: * ChangeLog: hans@259: Unified style of ChangeLog descriptions refering to issues. hans@259: tim@256: 2009-11-13 Tim Englich tim@256: tim@258: * doc/conf/products/timeseries/conf_timeseriespoint.xml: sascha@330: Moved Comment according to Instantiationerrors loading Artifact. tim@258: tim@258: 2009-11-13 Tim Englich sascha@330: tim@257: * doc/conf/log4j.properties,, tim@257: doc/conf/conf.xml, tim@257: doc/conf/arcsdeconnectionpool.properties, sascha@330: doc/conf/products/timeseries/conf_timeseriespoint.xml: tim@257: Added Documentation of Configuration-Files. tim@257: tim@257: 2009-11-13 Tim Englich sascha@330: tim@256: * doc/conf/products/verticalcrosssection/conf_mesh.xml, tim@256: doc/conf/products/horizontalcrosssection/conf_mesh.xml: tim@256: Removed statistics as possible out-Variant from Configuration tim@256: according to TG_0030.061 sascha@330: sascha@330: * src/test/ressources/verticalcrosssection_mesh/verticalcrosssection_step_08_out_statistics.xml, sascha@330: src/test/ressources/horizontalcrosssection_mesh/horizontalcrosssection_step_06_out_statistics.xml, sascha@330: src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (testHorizontalCrossSectionMeshArtifact), sascha@330: (testVerticalCrossSectionMeshArtifact): tim@256: Removed Statistics-Test on This Artifact-Test because no Statistic is required tim@256: for this Producttyp. sascha@330: hans@259: * src/main/java/de/intevation/gnv/transition/profile/horizontalcrosssection/ sascha@330: HorizontalCrossSectionMeshOutputTransition.java (createCSV): tim@256: No Statistics for this Output is required. sascha@330: sascha@330: * src/main/java/de/intevation/gnv/statistics/HorizontalCrossSectionStatistics.java: tim@256: Removed becaus the Statistics for ths product is not required. tim@256: tim@253: 2009-11-12 Tim Englich tim@253: sascha@330: * src/main/java/de/intevation/gnv/statistics/HorizontalCrossSectionStatistics.java (calculateXOrdinateValue), sascha@330: src/main/java/de/intevation/gnv/statistics/HorizontalProfileStatistics.java (calculateXOrdinateValue), sascha@330: src/main/java/de/intevation/gnv/statistics/VerticalProfileStatistics.java (calculateXOrdinateValue), tim@255: src/main/java/de/intevation/gnv/statistics/TimeseriesStatistics.java : sascha@330: Added the previous Row to the Method for calculating the GAP between sascha@330: those Rows. Also added Calculation of the Distance between two Points in tim@255: HorizontalProfileStatistic and returning the Depth in VerticalProfileStatistics. tim@255: Also added the Metjod clearStatistics to restet the Object if an new Calculation sascha@330: will started. tim@255: tim@255: 2009-11-12 Tim Englich sascha@330: sascha@330: * src/main/java/de/intevation/gnv/transition/TransitionBase.java (extractKVP): tim@254: Translated "Keine Auswahl" to "No Selection" according to the Specification that sascha@330: the primary Language is english. Please note that the Values that are currently sascha@330: displaied are almost in german. sascha@330: tim@254: 2009-11-12 Tim Englich sascha@330: sascha@330: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java (writeStatistics2XML): sascha@330: Changed XML-Syntaxt according to the new Structure of StatisticValues. tim@253: (out): sascha@330: Changed Call of calculateStatistics according to the new Methodsignature. sascha@330: sascha@330: * src/main/java/de/intevation/gnv/statistics/HorizontalProfileStatistics.java, sascha@330: src/main/java/de/intevation/gnv/statistics/VerticalProfileStatistics.java. tim@253: src/main/java/de/intevation/gnv/statistics/TimeseriesStatistics.java, sascha@330: src/main/java/de/intevation/gnv/statistics/Statistics.java: tim@253: Extended Methods calculateStatistics to put Lable-Values into the tim@253: Calculation. Now for each Group of Statistics is it possible sascha@330: to calclulate a separat name which is simmilar to the name of tim@253: the Diagramm-Series-Name. sascha@330: Also the Representation of the Statistics has changed so each Group tim@253: will be stored in one StatisticSet sascha@330: tim@253: * src/main/java/de/intevation/gnv/statistics/StatisticSet.java: tim@253: Bean for Storing the Statistic to one Group and also storing the sascha@330: Name of the Statistic. tim@253: tim@251: 2009-11-11 Tim Englich tim@251: hans@259: Issue 19: Validation of max. min value order hans@259: sascha@330: * src/main/java/de/intevation/gnv/transition/TransitionBase.java (putInputData): tim@252: Added Validation if a given maxvalue is greater than a given minvalue issue19 sascha@330: * src/main/java/de/intevation/gnv/utils/InputValidator.java (isInputValid): tim@252: Added new Method for validating if a maxvalue is greater than a minvalue. issue19 sascha@330: tim@252: 2009-11-11 Tim Englich hans@259: hans@259: Issue 81: Keeping input values in coordinate input fields hans@259: sascha@330: * src/main/java/de/intevation/gnv/transition/describedata/DefaultSingleValueDescribeData.java sascha@330: (setValue), src/main/java/de/intevation/gnv/transition/describedata/SingleValueDescribeData.java: sascha@330: Added setValue-Method sascha@330: for setting the Value which was sent back to the Server using the feed-request. issue81 sascha@330: sascha@330: * src/main/java/de/intevation/gnv/transition/TransitionBase.java (getDescribeData): tim@251: Added SingleValueDescribeData to the method for storing InputValues for tim@251: Describeoutput issue81 sascha@330: tim@250: 2009-11-11 Tim Englich tim@250: tim@250: * src/main/java/de/intevation/gnv/transition/describedata/MinMaxDescribeData.java, sascha@330: src/main/java/de/intevation/gnv/transition/describedata/DefaultMinMaxDescribeData.java: tim@250: Added getName and added Constants for minValue and maxValue Id to tim@250: enable the storage of this Values which would be put using the tim@250: feed command. sascha@330: tim@250: * src/main/java/de/intevation/gnv/transition/TransitionBase.java (describe): tim@250: Changed the usage of the Name of the MinMaxTransition from getMinName to getName. sascha@330: sascha@330: * src/main/java/de/intevation/gnv/transition/MinMaxTransition.java (purifyResult): tim@250: Changed the Constructor of MinMaxTransition according to API-Changes of tim@250: DefaultMinMaxDescribeData sascha@330: tim@249: 2009-11-11 Tim Englich tim@249: hans@259: Issue 76: Improving XML config documents hans@259: tim@249: * doc/conf/products/verticalprofile/conf_mesh.xml, tim@249: doc/conf/products/verticalprofile/conf_instantaneouspoint.xml, tim@249: doc/conf/products/verticalcrosssection/conf_mesh.xml, tim@249: doc/conf/products/timeseries/conf_mesh.xml, tim@249: doc/conf/products/horizontalprofile/conf_mesh.xml, sascha@330: doc/conf/products/horizontalcrosssection/conf_mesh.xml: tim@249: Removed unnecessary characters 'v' from the Documents. issue76 tim@249: tim@247: 2009-11-10 Tim Englich tim@247: tim@248: * src/main/resources/lang/artifactMessages_*.properties: tim@248: Added Ressources for the AreaFilter Ids areaid and subareid tim@248: tim@248: 2009-11-10 Tim Englich hans@259: hans@259: Issue 68: Improving ODV Export sascha@330: sascha@330: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java (TIMESERIES_ODV_PROFILE_NAMES): tim@247: Sort Columns to the given order of the ODV-Specification sascha@330: and added the Columns DATAVALUE and PARAMETER to the output tim@247: according to issue68 hans@259: sascha@330: * doc/conf/queries.properties: sascha@330: Changed Column-alias in Query for HorizontalProfile ODV-Exports in Meshes tim@247: from PARAMETERID to PARAMETER to be able to use in only on ODV-Export-Profile tim@247: tim@242: 2009-11-10 Tim Englich tim@242: sascha@330: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (testVerticalCrossSectionMeshArtifact): tim@246: Added the ODV-Export to the Unit-Testcase for VerticalCrossSection-Mesh. sascha@330: Some Refactoring Work done. sascha@330: * doc/conf/products/verticalcrosssection/conf_mesh.xml: sascha@330: Added QueryID for ODV-Exports to the Configuration of an tim@246: Mesh-VerticalCrossSection-Artifacts sascha@330: * doc/conf/queries.properties: tim@246: Added Query for VerticalCrossSection ODV-Exports in Meshes. tim@246: * src/test/ressources/verticalcrosssection_mesh/verticalcrosssection_step_08_feed.xml: tim@246: Changed Datevalue, because the old value was out of range to the Data. sascha@330: * src/test/ressources/verticalcrosssection_mesh/verticalcrosssection_step_08_out_odv.xml: sascha@330: Added Out-Request for ODV-Export to the JUnitTest Configuration for tim@246: VerticalCrossSection Mesh. tim@246: tim@246: 2009-11-10 Tim Englich sascha@330: tim@245: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (testHorizontalCrossSectionMeshArtifact): tim@245: Added the ODV-Export to the Unit-Testcase for HorizontalCrossSection-Mesh. sascha@330: Some Refactoring Work done. sascha@330: * doc/conf/queries.properties: tim@245: Added Query for HorizontalCrossSection ODV-Exports in Meshes. sascha@330: * doc/conf/products/horizontalcrosssection/conf_mesh.xml: sascha@330: Added QueryID for ODV-Exports to the Configuration of an tim@245: Mesh-HorizontalCrossSection-Artifacts sascha@330: * src/test/ressources/horizontalcrosssection_mesh/horizontalcrosssection_step_06_feed.xml: tim@245: Changed Datevalue, because the old value was out of range to the Data. sascha@330: * src/test/ressources/horizontalcrosssection_mesh/horizontalcrosssection_step_06_out_odv.xml: sascha@330: Added Out-Request for ODV-Export to the JUnitTest Configuration for tim@245: HorizontalCrossSection Mesh. tim@245: tim@245: 2009-11-10 Tim Englich hans@260: sascha@330: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (testHorizontalProfileInstantaneousPointArtifact): tim@244: Added the ODV-Export to the Unit-Testcase for HorizontalProfile-InstantaneousPoint. tim@244: Some Refactoring Work done. sascha@330: * src/test/ressources/horizontalProfile_instantaneouspoint/horizontalprofile_step_06_out_odv.xml: sascha@330: Added Out-Request for ODV-Export to the JUnitTest Configuration for tim@244: HorizontalProfiles InstantaneousPoint. sascha@330: * doc/conf/products/horizontalprofile/conf_instantaneouspoint.xml: sascha@330: Added QueryID for ODV-Exports to the Configuration of an tim@244: InstantaneousPoint-HorizontalProfile-Artifacts tim@244: * doc/conf/queries.properties: tim@244: Added Query for HorizontalProfile ODV-Exports in InstantaneousPoint tim@244: tim@244: 2009-11-10 Tim Englich sascha@330: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (testVerticalProfileInstantaneousPointArtifact): tim@244: Added the ODV-Export to the Unit-Testcase for VerticalProfile-InstantaneousPoint. tim@243: Some Refactoring Work done. sascha@330: * doc/conf/products/verticalprofile/conf_instantaneouspoint.xml: sascha@330: Added QueryID for ODV-Exports to the Configuration of an tim@243: InstantaneousPoint-VerticalProfile-Artifacts sascha@330: * doc/conf/queries.properties: tim@243: Added Query for VerticalProfile ODV-Exports in InstantaneousPoint tim@243: * src/test/ressources/verticalprofile_instantaneouspoint/verticalprofile_step_05_out_odv.xml: tim@243: Added Out-Request for ODV-Export to the JUnitTest Configuration for VerticalProfiles InstantaneousPoint. tim@243: tim@243: 2009-11-10 Tim Englich sascha@330: sascha@330: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (testHorizontalProfileMeshPointArtifact): tim@242: Added the ODV-Export to the Unit-Testcase for HorizontalProfile-Mesh. tim@242: Some Refactoring Work done. sascha@330: * doc/conf/products/horizontalprofile/conf_mesh.xml: sascha@330: Added QueryID for ODV-Exports to the Configuration of an tim@242: Mesh-HorizontalProfile-Artifacts sascha@330: * doc/conf/queries.properties: tim@242: Added Query for HorizontalProfile ODV-Exports in Meshes sascha@330: * src/test/ressources/horizontalProfile_mesh/horizontalprofile_step_10_out_odv.xml: tim@242: Added Out-Request for ODV-Export to the JUnitTest Configuration for HorizontalProfiles Mesh. sascha@330: * src/test/ressources/horizontalProfile_mesh/horizontalprofile_step_02_feed.xml: tim@242: BugFix: Changed missspelled Input-Name tim@242: tim@241: 2009-11-09 Tim Englich tim@241: sascha@330: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java (TIMESERIES_ODV_PROFILE_NAMES): tim@241: Changed the Order of Columnlookup for ODV-Exports and added column "Depth" to the Export sascha@330: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (testTimeSeriesMeshArtifact): tim@241: Added the ODV-Export to the Unit-Testcase for TimeSeries-Mesh. tim@241: Some Refactoring Work done. sascha@330: * doc/conf/queries.properties: tim@241: Added Query for VerticalProfile ODV-Exports in Meshes sascha@330: * doc/conf/products/verticalprofile/conf_mesh.xml: sascha@330: Added QueryID for ODV-Exports to the Configuration of an tim@241: Mesh-VerticalProfile-Artifacts sascha@330: * src/test/ressources/verticalprofile_mesh/verticalprofile_step_10_out_odv.xml, sascha@330: src/test/ressources/verticalprofile/verticalprofile_step_06_out_odv.xml: tim@242: Added Out-Request for ODV-Export to the JUnitTest Configuration for VerticalProfiles. sascha@330: tim@240: 2009-11-09 Tim Englich tim@240: sascha@330: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (testTimeSeriesMeshArtifact): hans@259: Added the ODV-Export to the Unit-Testcase for TimeSeries-Mesh. hans@259: Some Refactoring Work done. hans@259: hans@259: * src/test/ressources/timeseries_mesh/timeseries_step_08_out_odv.xml: hans@259: Added Out-request for ODV-Export to the JUnitTest Configuration for TimeSeries Mesh. hans@259: sascha@330: * doc/conf/products/timeseries/conf_mesh.xml: hans@259: Added QueryID for ODV-Exports to the Configuration of an Mesh-TimeSeries-Artifacts hans@259: hans@259: * doc/conf/queries.properties: Added Query for TimeSeries ODV-Exports in Meshes hans@259: ingo@239: 2009-11-09 Ingo Weinzierl ingo@239: ingo@239: * src/main/java/de/intevation/gnv/exports/Export.java ingo@239: src/main/java/de/intevation/gnv/exports/DefaultProfile.java ingo@239: src/main/java/de/intevation/gnv/exports/DefaultExport.java: Added the ingo@239: possibility to print column labels in the first line of an export. ingo@239: ingo@239: * src/main/java/de/intevation/gnv/transition/profile/horizontal/HorizontalProfileOutputTransition.java, ingo@239: src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java: ingo@239: Adjusted instantiation of the DefaultExport object and added column labels ingo@239: for odv export. ingo@239: ingo@238: 2009-11-09 Ingo Weinzierl ingo@238: ingo@238: * src/main/java/de/intevation/gnv/exports/SimpleOdvDataCollector.java: ingo@238: Implemented a DataCollector for Odv exports. ingo@238: ingo@238: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java: ingo@238: OEV-export uses a SimpleOdvDataCollector to collect export data. ingo@238: ingo@235: 2009-11-09 Ingo Weinzierl ingo@235: ingo@235: * src/main/java/de/intevation/gnv/exports/ShapeDataCollector.java, ingo@235: src/main/java/de/intevation/gnv/exports/HorizontalProfileDataCollector.java: ingo@235: Renamed HorizontalProfileDataCollector into ShapeDataCollector, because it ingo@235: will be used by other transitions as well. ingo@235: ingo@235: * src/main/java/de/intevation/gnv/transition/profile/horizontal/HorizontalProfileOutputTransition.java: ingo@235: Adjusted class name of DataCollector after renaming. ingo@235: ingo@234: 2009-11-09 Ingo Weinzierl ingo@234: ingo@234: * src/main/java/de/intevation/gnv/exports/HorizontalProfileDataCollector.java: ingo@234: Special DataCollector for fetching data used for horizontal profile ingo@234: exports. ingo@234: ingo@234: * src/main/java/de/intevation/gnv/transition/profile/horizontal/HorizontalProfileOutputTransition.java: ingo@234: Uses the an exporter for csv export. ingo@234: ingo@233: 2009-11-09 Ingo Weinzierl ingo@233: ingo@233: * src/main/java/de/intevation/gnv/exports/Export.java, ingo@233: src/main/java/de/intevation/gnv/exports/DefaultDataCollector.java: sascha@330: Implemented a DataCollector to collect all data used to create exports. sascha@330: DefaultCollector fetches data with help of its headers. For special sascha@330: exports, where a header returns more than one value, special ingo@233: DataCollectors needs to be implemented (overwritung the 'getData' method). ingo@233: ingo@233: * src/main/java/de/intevation/gnv/exports/DefaultProfile.java, ingo@233: src/main/java/de/intevation/gnv/exports/DefaultExport.java: Export now ingo@233: uses a DataCollector to get the data. ingo@233: ingo@233: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java: sascha@330: Adjusted exports of csv export. ingo@233: tim@232: 2009-11-09 Tim Englich tim@232: sascha@330: * doc/conf/queries.properties: sascha@330: Added SQLStatemenet for ODV-Data for VerticalProfiles tim@237: on TimeSeriesPoints. sascha@330: * doc/conf/products/verticalprofile/conf_timeseriespoint.xml: tim@237: Added QueryID for ODV-Data-Query sascha@330: tim@237: 2009-11-09 Tim Englich sascha@330: tim@232: * src/test/ressources/timeseries/timeseries_step_06_out_*.xml: tim@232: Added the missing out-Modes to the Testcase and rename it to sascha@330: the common used way in this TestCases. sascha@330: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (testTimeSeriesArtifact): tim@232: Added the ODV-Export to the Unit-Testcase. tim@232: Some Refactoring Work done. sascha@330: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java (out): tim@232: The Method for generating ODV-Export now reads its Data from tim@232: the special Method which delivers the adapted Data. sascha@330: * src/main/java/de/intevation/gnv/transition/TransitionBase.java (generateFilterValuesFromInputData): tim@232: Extracted the Generation of the FilterValues for the geo-backend tim@232: to use it in several methods. sascha@330: * src/main/java/de/intevation/gnv/transition/OutputTransitionBase.java (getODVResult): sascha@330: Added Method for getting the rquired Data for ODV-Exports sascha@330: * doc/conf/products/timeseries/conf_timeseriespoint.xml: sascha@330: Added separat QueryID Lookup for ODV-Data-Queryies sascha@330: * doc/conf/queries.properties: sascha@330: DB-Queries for ODV-Support TimeSeries on TimeSeriesPoints added. tim@232: ingo@230: 2009-11-06 Ingo Weinzierl ingo@230: ingo@230: * src/main/java/de/intevation/gnv/exports, ingo@230: src/main/java/de/intevation/gnv/exports/Export.java, ingo@230: src/main/java/de/intevation/gnv/exports/DefaultProfile.java, ingo@230: src/main/java/de/intevation/gnv/exports/DefaultExport.java: Implemented an ingo@230: Exporter for odv and csv exports. Each exports just needs a Profile, which sascha@330: describes the output. ingo@230: ingo@230: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java: ingo@230: Added an exemplary export for CSV and ODV formats of ingo@230: TimeSeriesOutputTransition. ingo@230: ingo@230: TODO: ODV exporter exports the same data as CSV exporter does. This needs ingo@230: to be adapted. ingo@230: tim@229: 2009-11-06 Tim Englich tim@229: sascha@330: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java: ingo@230: Added and moved Workflowsteps because of changes in the Workflow of these Artifacts. ingo@230: Now the Region-Filter is added to the Workflow an can be tested using ingo@230: this UnitTestCases. ingo@230: sascha@330: * src/test/ressources/horizontalcrosssection_mesh/horizontalcrosssection_step_*.xml, ingo@230: src/test/ressources/horizontalProfile_mesh/horizontalprofile_step_*.xml, ingo@230: src/test/ressources/timeseries/timeseries_step_*.xml, ingo@230: src/test/ressources/timeseries_mesh/timeseries_step_*.xml, ingo@230: src/test/ressources/verticalprofile/verticalprofile_step_*.xml, ingo@230: src/test/ressources/verticalprofile_mesh/verticalprofile_step_*.xml: ingo@230: Added and moved Files because of changes in the Workflow of these Artifacts. ingo@230: Now the Region-Filter is added to the Workflow an can be tested using ingo@230: the UnitTestCases. ingo@230: ingo@228: 2009-11-06 Ingo Weinzierl ingo@228: ingo@228: * doc/conf/products/horizontalcrosssection/conf_mesh.xml, ingo@228: doc/conf/products/timeseries/conf_mesh.xml, ingo@228: doc/conf/products/timeseries/conf_timeseriespoint.xml, ingo@228: doc/conf/products/horizontalprofile/conf_mesh.xml, ingo@228: doc/conf/products/horizontalprofile/conf_instantaneouspoint.xml, ingo@228: doc/conf/products/verticalprofile/conf_mesh.xml, ingo@228: doc/conf/products/verticalprofile/conf_timeseriespoint.xml, ingo@228: doc/conf/products/verticalprofile/conf_instantaneouspoint.xml: Added odv ingo@228: as output format. ingo@228: tim@226: 2009-11-06 Tim Englich tim@226: sascha@330: * src/main/java/de/intevation/gnv/chart/ChartFactory.java (calculateMaxGap): sascha@330: Bugfix Gap-Calculation moved maxGap into negative Valies because of tim@226: overflow of Long-Variable. tim@226: tim@222: 2009-11-05 Tim Englich tim@222: sascha@330: * doc/conf/queries.properties: tim@224: Query to select only those TimeSeriesPoints tim@224: which are within an Region sascha@330: sascha@330: * doc/conf/products/timeseries/conf_timeseriespoint.xml, sascha@330: doc/conf/products/verticalprofile/conf_timeseriespoint.xml: sascha@330: Added the RegionFilters into the configuration of the Products hans@260: for TimeSeriesPoints. tim@224: tim@224: 2009-11-05 Tim Englich hans@259: sascha@330: * doc/conf/queries.properties: tim@223: Added new Queries to fill the Lists for the tim@223: Regionfilters and one Query to select only those Meshes tim@224: which are within an Region. sascha@330: sascha@330: * doc/conf/products/verticalprofile/conf_mesh.xml, sascha@330: doc/conf/products/verticalcrosssection/conf_mesh.xml, sascha@330: doc/conf/products/timeseries/conf_mesh.xml, sascha@330: doc/conf/products/horizontalprofile/conf_mesh.xml, tim@223: doc/conf/products/horizontalcrosssection/conf_mesh.xml: tim@223: Added the RegionFilters into the configuration of the Products tim@223: for Meshes. tim@223: tim@223: 2009-11-05 Tim Englich hans@259: tim@222: * src/test/ressources/*_describe.xml: tim@222: Added the DescribeRequestBodies to each TestCaseData. sascha@330: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java: tim@222: Added the DescribeRequestBody to Describe-Calls in the Test sascha@330: * src/main/java/de/intevation/gnv/transition/TransitionBase.java: tim@222: Added the possibility to switch to an alternative Transition if no value was choosen. sascha@330: sascha@330: * src/main/java/de/intevation/gnv/utils/InputValidator.java (isInputValid): tim@222: Added that the Inputvalue is valid if it fullfills the confitions of "no value choosen" (n/n) sascha@330: sascha@330: * src/main/java/de/intevation/gnv/statistics/HorizontalProfileStatistics.java (calculateXOrdinateValue): tim@222: Added Dummyvalue for X-OrdinateValue tim@222: src/main/java/de/intevation/gnv/timeseries/TimeSeriesArtifact.java (describe), sascha@330: src/main/java/de/intevation/gnv/profile/verticalcrosssection/VerticalCrossSectionMeshArtifact.java (describe), tim@222: src/main/java/de/intevation/gnv/profile/vertical/VerticalProfileArtifact.java (describe), sascha@330: src/main/java/de/intevation/gnv/profile/horizontalcrosssection/HorizontalCrossSectionMeshArtifact.java (describe), tim@222: src/main/java/de/intevation/gnv/profile/horizontal/HorizontalProfileArtifact.java (describe), tim@222: src/main/java/de/intevation/gnv/artifacts/fis/FISArtifact.java (describe), sascha@330: src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java (createDescibeOutput): tim@222: Added the possibility to exclude the UI from the DescribeRequest. tim@222: tim@221: 2009-11-03 Tim Englich tim@221: sascha@330: * src/main/java/de/intevation/gnv/chart/ChartFactory.java (getTimeGapValue): sascha@330: Integrated special case for TimeGaps in Meshes. There is no Gap defined in sascha@330: Meshes so we have to use Long.MAXVALE to define a Gap for a Mesh which value tim@221: canno be reached. tim@221: tim@220: 2009-11-02 Tim Englich tim@220: sascha@330: * src/main/java/de/intevation/gnv/transition/profile/horizontalcrosssection/HorizontalCrossSectionMeshOutputTransition.java sascha@330: (createCSV): Code Cleanup: Removed obsoled TODO Flag sascha@330: sascha@330: * src/main/java/de/intevation/gnv/transition/TransitionBase.java (setSelection): sascha@330: Changed the Value of the min and maxvalue of the Request to the Value which is unsed to name tim@220: the Inputfields in the DescribeOutput. hans@259: tim@220: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java, sascha@330: src/main/java/de/intevation/gnv/transition/profile/horizontal/NorthSouthEastWestTransition.java, tim@220: src/main/java/de/intevation/gnv/transition/Transition.java, sascha@330: src/main/java/de/intevation/gnv/transition/SingleInputTransition.java, sascha@330: src/main/java/de/intevation/gnv/transition/OutputTransitionBase.java, sascha@330: src/main/java/de/intevation/gnv/transition/MinMaxTransition.java, sascha@330: src/main/java/de/intevation/gnv/transition/DefaultTransition.java, sascha@330: src/main/java/de/intevation/gnv/transition/CoordinateSelectionTransition.java, tim@220: src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java (advance), sascha@330: CodeCleanup: Removed needless Method validate from Transition, tim@220: because it had always returned true sascha@330: tim@218: 2009-10-30 Tim Englich tim@218: tim@219: * src/test/ressources/horizontalcrosssection_mesh/horizontalcrosssection_step_*.xml: tim@219: Added the Testdata for the Unittest for HorizontalCrossSectionMeshArtifacts. tim@219: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (testHorizontalCrossSectionMeshArtifact): tim@219: Added the UnitTest-Case for HorizontalCrossSectionMeshArtifacts sascha@330: tim@219: 2009-10-30 Tim Englich hans@259: sascha@330: * doc/conf/queries.properties: tim@218: Added the Query for selecting the Data for generating Outputs of tim@218: HorizontalCrossSectionMeshOutputTransition sascha@330: * doc/conf/products/horizontalcrosssection/conf_mesh.xml: tim@218: Added the configuration for the HorizontalCrossSectionMeshOutputTransition tim@218: * src/main/java/de/intevation/gnv/transition/profile/horizontalcrosssection/HorizontalCrossSectionMeshOutputTransition.java: tim@218: Added the OutputTransition for generating /HorizontalCrossSections. tim@218: * src/main/java/de/intevation/gnv/statistics/HorizontalCrossSectionStatistics.java: tim@218: The Class for generating the Statistics to HorizontalCrossSections sascha@330: * src/main/java/de/intevation/gnv/chart/HorizontalCrossSectionChartFactory.java: tim@218: The Class Stub for generating HorizontalCrossSections Charts. tim@218: tim@217: 2009-10-29 Tim Englich tim@217: hans@259: Issue 45: Defining gaps for spatial and temporal gaps hans@259: tim@217: * doc/conf/products/timeseries/timegap_definition.xml, tim@217: doc/conf/products/timeseries/conf_timeseriespoint.xml: tim@217: Added the Configuration for TimeGaps to the TimeSeries-Configurations. issue45 sascha@330: sascha@330: * doc/conf/queries.properties: tim@217: Added TimeGapIp to the Queries for the Resultdata of TimeSeriesArtifacts. issue45 sascha@330: tim@217: * src/main/java/de/intevation/gnv/timeseries/gap/DefaultTimeGap.java, sascha@330: src/main/java/de/intevation/gnv/timeseries/gap/TimeGap.java, sascha@330: src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java (setup): sascha@330: src/main/java/de/intevation/gnv/chart/ChartFactory.java (calculateMaxGap): tim@217: Added configurable TimeGap Support to the TimeSeries-Chart-Generation. issue45 sascha@330: sascha@330: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java, sascha@330: src/main/java/de/intevation/gnv/utils/ArtifactXMLUtilities.java (readConfiguration): tim@217: Moved Method from GNVArtifactBase to make it assesible for more Objects. issue45 tim@217: tim@215: 2009-10-28 Tim Englich tim@215: hans@259: * src/main/java/de/intevation/gnv/profile/horizontalcrosssection/ hans@259: HorizontalCrossSectionMeshArtifact.java (HorizontalCrossSectionMeshArtifact), hans@259: doc/conf/queries.properties, doc/conf/conf.xml, sascha@330: doc/conf/products/horizontalcrosssection/conf_mesh.xml, hans@259: src/main/resources/lang/artifactMessages* .properties: hans@259: Added Workflow for determining the Query-Parameters for Horizontal cross-sections. sascha@330: tim@216: 2009-10-28 Tim Englich hans@259: sascha@330: * doc/conf/conf.xml: tim@215: Added Configuration for two new FIS. Current Meter and Ice Station Reports hans@259: sascha@330: * src/main/resources/lang/artifactMessages*.properties: tim@215: Added Ressources for two new FIS. Current Meter and Ice Station Reports tim@215: tim@213: 2009-10-27 Tim Englich tim@213: hans@259: * doc/conf/conf.xml: tim@215: Added Configuration for two new FIS. Sea State and SEACAT hans@259: sascha@330: * src/main/resources/lang/artifactMessages*.properties: tim@215: Added Ressources for two new FIS. Sea State and SEACAT sascha@330: tim@214: 2009-10-27 Tim Englich hans@259: hans@259: Issue 61: Vertical profile (Meshes): Selection of minimal and maximal hans@259: depths zones hans@259: sascha@330: * src/main/resources/lang/artifactMessages*.properties: tim@213: Added Ressources for the minimal and maximal Layer to use in VerticalProfiles of Meshes issue61 hans@259: sascha@330: * doc/conf/products/verticalprofile/conf_mesh.xml: tim@213: Added two new Transitions for selecting the min and max-Layer to use. issue61 hans@259: sascha@330: * doc/conf/queries.properties: tim@213: Added Queries for Selecting the Depth for selecting the minimum and the maximum Layer to use tim@213: Drawing the Chart. issue61 hans@259: sascha@330: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (testVerticalProfileMeshArtifact): sascha@330: Integrated two further Transitions-Steps according to changes in Workflow of tim@213: VerticalProfiles in Meshes. issue61 hans@259: tim@213: * src/test/ressources/verticalprofile_mesh/verticalprofile_step_*.xml: tim@213: New Testdata generated according to changes in Workflow of VerticalProfiles in Meshes. issue61 tim@213: tim@211: 2009-10-26 Tim Englich tim@211: hans@259: Issue 31: TG_0020.018: Input of manual depth zones hans@259: sascha@330: * src/main/resources/lang/artifactMessages_de_DE.properties: tim@212: Added Ressources for the minimal and maximal value of the depth hans@259: tim@211: * src/test/ressources/verticalprofile_instantaneouspoint/verticalprofile_step_05_out_statistics.xml (renamed), tim@211: src/test/ressources/verticalprofile_instantaneouspoint/verticalprofile_step_05_out_csv.xml (renamed), sascha@330: src/test/ressources/verticalprofile_instantaneouspoint/verticalprofile_step_05_out_chart.xml(renamed), sascha@330: src/test/ressources/verticalprofile_instantaneouspoint/verticalprofile_step_05_feed.xml, sascha@330: src/test/ressources/verticalprofile_instantaneouspoint/verticalprofile_step_04_advance.xml, tim@211: src/test/ressources/verticalprofile_instantaneouspoint/verticalprofile_step_03_advance.xml, sascha@330: src/test/ressources/verticalprofile/verticalprofile_step_05_out_statistics.xml(renamed), sascha@330: src/test/ressources/verticalprofile/verticalprofile_step_05_out_csv.xml(renamed), sascha@330: src/test/ressources/verticalprofile/verticalprofile_step_05_out_chart.xml(renamed), sascha@330: src/test/ressources/verticalprofile/verticalprofile_step_05_feed.xml, sascha@330: src/test/ressources/verticalprofile/verticalprofile_step_04_advance.xml, sascha@330: src/test/ressources/verticalprofile/verticalprofile_step_03_advance.xml, sascha@330: src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java: tim@211: Edited the RestCases for VerticalProfiles according to the requirement that sascha@330: the user should be able to enter the minimal and maximal Value of the depth that tim@211: should be show n in the charts. issue31 hans@259: sascha@330: * doc/conf/queries.properties, sascha@330: doc/conf/products/verticalprofile/conf_timeseriespoint.xml, tim@211: doc/conf/products/verticalprofile/conf_instantaneouspoint.xml: tim@211: Adding required Configuration-Parts to get the possible to enter the minmum tim@211: and maximum depth value that should be shown in the charts. issue31 tim@211: tim@206: 2009-10-23 Tim Englich tim@206: tim@210: * src/test/ressources/timeseries_mesh/timeseries_step_07_feed.xml: sascha@330: The Timeperiod of the Modeldata has changed. so it was nessessarry to change sascha@330: the Unittest to get propper Results tim@210: tim@210: 2009-10-23 Tim Englich sascha@330: tim@209: * doc/conf/queries.properties: tim@210: Some Queryimproofments done. Inner-Selects has been removed where it was possible. sascha@330: hans@259: 2009-10-23 Tim Englich hans@259: hans@259: Issue 3: Artifact: Storing the internal state instead of results sascha@330: sascha@330: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java, sascha@330: src/main/java/de/intevation/gnv/timeseries/TimeSeriesArtifact.java (describe), sascha@330: src/main/java/de/intevation/gnv/profile/verticalcrosssection/VerticalCrossSectionMeshArtifact.java (describe), tim@208: src/main/java/de/intevation/gnv/profile/vertical/VerticalProfileArtifact.java (describe), tim@208: src/main/java/de/intevation/gnv/profile/horizontal/HorizontalProfileArtifact.java (describe): sascha@330: Use super.identifier as uuid. issue3 sascha@330: hans@259: 2009-10-23 Tim Englich hans@259: tim@207: * src/test/ressources/verticalprofile/verticalprofile_step_04_feed.xml, sascha@330: src/test/ressources/verticalprofile/verticalprofile_step_03_advance.xml, tim@207: src/test/ressources/verticalprofile/verticalprofile_step_04_out_*.xml, sascha@330: src/test/ressources/timeseries_mesh/timeseries_step_07_out_*.xml, tim@207: src/test/ressources/horizontalProfile_instantaneouspoint/horizontalprofile_step_06_out_*.xml: sascha@330: Changed the uuid because the new Storage shows that there were different ones in one Testcase sascha@330: tim@207: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java: sascha@330: Put the UUID into the Resultlookup sascha@330: sascha@330: * src/main/java/de/intevation/gnv/transition/TransitionBase.java: tim@207: Removed the Storage of Results in the Object and put them into the ehcache hans@259: sascha@330: * src/main/java/de/intevation/gnv/transition/Transition.java: tim@207: Removed some needless Methods that were not longer Required sascha@330: hans@259: * src/main/java/de/intevation/gnv/transition/profile/horizontal/NorthSouthEastWestTransition.java hans@259: (advance), src/main/java/de/intevation/gnv/transition/SingleInputTransition.java hans@259: (purifyResult), src/main/java/de/intevation/gnv/transition/MinMaxTransition.java hans@259: (purifyResult), src/main/java/de/intevation/gnv/transition/CoordinateSelectionTransition.java hans@259: (extractKVP), src/main/java/de/intevation/gnv/timeseries/TimeSeriesArtifact.java hans@259: (describe), src/main/java/de/intevation/gnv/profile/verticalcrosssection/VerticalCrossSectionMeshArtifact.java hans@259: (describe), src/main/java/de/intevation/gnv/profile/vertical/VerticalProfileArtifact.java hans@259: (describe), src/main/java/de/intevation/gnv/profile/horizontal/HorizontalProfileArtifact.java hans@259: (describe), src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java (uuid): sascha@330: Lookup the Results from ehcache and centralize the Lookup to one methode. tim@207: tim@207: 2009-10-23 Tim Englich hans@259: sascha@330: * doc/conf/queries.properties: tim@206: Optimized Query horizontalprofile_instantaneouspoint_cruise because it is not warranted tim@206: that the name of an cruise is set. issue60 tim@206: tim@204: 2009-10-22 Tim Englich tim@204: hans@259: * src/main/java/de/intevation/gnv/transition/CoordinateSelectionTransition.java hans@259: (extractKVP): Added the possiblility to fetch an further Column with hans@259: the alias Value to display it together with the Coordinatevalues hans@259: sascha@330: * doc/conf/queries.properties: tim@205: Added the Coordinates to an Measuementpoint to display it. hans@259: tim@205: * doc/conf/products/verticalprofile/conf_instantaneouspoint.xml: hans@259: Change TransitionType for displaying Coordinatevalues aditionaly to sascha@330: the Time of an Measurement hans@259: tim@205: 2009-10-22 Tim Englich hans@259: hans@259: Issue 40: Instantiation of artifacts slow hans@259: hans@259: * doc/conf/conf.xml, doc/conf/products/*/conf_*.xml: tim@204: Split the Configuration of the ArtifactDatabase in several Configurationfiles. hans@259: For Each Product-Artifact one single File to make it easier to administer the System. hans@259: tim@204: * src/main/java/de/intevation/gnv/transition/TransitionFactory.java (createTransition), tim@204: src/main/java/de/intevation/gnv/transition/TransitionBase.java (setup), tim@204: src/main/java/de/intevation/gnv/transition/OutputTransitionBase.java (setup), sascha@330: src/main/java/de/intevation/gnv/artifacts/fis/FISArtifact.java (setup): sascha@330: Lookup of XML-Attributes was changed from XPath-lookup to direct hans@259: Access on the fetched Element to speed up the Artifactinstantiation issue40 hans@259: sascha@330: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java (getConfigurationFragment): hans@259: Read Configuration information for the Productartifact from a separat folder if an xlink:href tim@204: Attribute exists in tne Configurationnode of the Artifact. tim@204: This was inserted to speed up the Artifactinstantiation and to split the Configuration tim@204: in several Configurationfiles that where smallaer issue40 sascha@330: Also the lookup of XML-Attributes was changed from XPath-lookup to direct tim@204: Access on the fetched Element tim@204: tim@201: 2009-10-21 Tim Englich tim@201: hans@259: Issue 59: Added relative pathnames to central config document hans@259: sascha@330: * doc/conf/conf.xml: sascha@330: Added relative locations for further required configurationfiles . issue59 tim@203: * src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContextFactory.java (createArtifactContext): sascha@330: Added the prossibility to configure the location of required configurationfiles not absolute. issue59 sascha@330: tim@203: 2009-10-21 Tim Englich sascha@330: sascha@330: * doc/conf/arcsdeconnectionpool.properties: tim@203: Added separat ConnectionPoolProperties to this Project. sascha@330: * doc/conf/*: tim@203: Moved ConfigurationFiles from src/test/ressources to doc/conf sascha@330: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (configurationDir): tim@201: Changed Configuration Folder to doc/conf tim@201: tim@198: 2009-10-20 Tim Englich tim@198: hans@259: * doc/conf: hans@259: Added Folder for the Configuration of the gnv-artifacts. hans@259: tim@197: 2009-10-20 Tim Englich tim@197: sascha@330: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (testVerticalCrossSectionMeshArtifact): tim@197: Added Testcase for testing the Workflow for generating VerticalCrossSections. sascha@330: * src/test/ressources/queries.properties: tim@197: Added the required Queries for providing VerticalCrossSection using Meshes. sascha@330: * src/test/ressources/conf.xml: tim@197: Added the Configuration for an VerticalCrossSection using Meshes. sascha@330: * src/test/ressources/verticalcrosssection_mesh/verticalcrosssection_step_*.xml: tim@197: Adding Requestdocuments for testing the Workflow of Generating an VerticalCrossSection. tim@197: * src/main/java/de/intevation/gnv/transition/profile/verticalcrosssection/VerticalCrossSectionOutputTransition.java : tim@197: Added an OutputTransition for renedering the Data of VerticalCrossSections. sascha@330: * src/main/java/de/intevation/gnv/profile/verticalcrosssection/VerticalCrossSectionMeshArtifact.java: tim@197: Added Class for the Representation of VerticalCrossSection Artifacts into the Project. tim@197: * src/main/java/de/intevation/gnv/chart/VerticalCrossSectionChartFactory.java (createProfileChart): tim@197: Put Class-Sub for the Chart generation of VerticalCrossSections into the Project. tim@197: tim@197: 2009-10-20 Tim Englich hans@259: hans@259: Issue 54: Errors in diagramms for time series in IMIS sascha@330: sascha@330: * src/test/ressources/queries.properties: hans@259: Bugfix for TIMESERIESPOINT the first and the last value weren't used hans@259: in the Query which was integrated from the Prototyp to the Project hans@259: ussue54 sascha@330: tim@190: 2009-10-19 Tim Englich tim@190: hans@259: Issue 55: Harmoization of coordinate values for input fields hans@259: sascha@330: * src/main/java/de/intevation/gnv/transition/TransitionBase.java (describe): tim@195: Added uniform Visualization of Single Input-Elements to MinMax-Elements. issue55 sascha@330: tim@195: 2009-10-19 Tim Englich hans@259: hans@259: Issue 56: Error - Behavior of a form without constraint values hans@259: tim@194: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java (feed): sascha@330: Catch Exception that the Calling Program could not put no InputData sascha@330: into the feed Request.issue56 tim@194: tim@194: 2009-10-19 Tim Englich hans@259: hans@259: Issue 19: Validation of date and double values sascha@330: tim@193: * src/main/java/de/intevation/gnv/chart/ChartFactory.java (createDataset), tim@193: src/main/java/de/intevation/gnv/chart/VerticalProfileChartFactory.java (createDataset): tim@193: Adding empty Series into Chart to prevent NPE issue 19 sascha@330: tim@193: 2009-10-19 Tim Englich hans@259: hans@259: Issue 35: Wrong date values force the panel to start from beginning hans@259: sascha@330: * src/main/java/de/intevation/gnv/transition/TransitionBase.java (putInputData): tim@192: Correct misspelled Exception-Message as an Result of fixing issue35 sascha@330: hans@259: 2009-10-19 Tim Englich hans@259: hans@259: Issue 50: Adding the layer number for depth information hans@259: sascha@330: * src/test/ressources/queries.properties: sascha@330: Changed the Value of Layer and Depth range visualization of Meshes tim@191: according to issue50 sascha@330: tim@191: 2009-10-19 Tim Englich hans@259: hans@260: Issue 47: Translation of strings for time series hans@259: sascha@330: * src/main/resources/lang/artifactMessages*.properties: tim@190: Changed the displayed-Values as defined in issue47 sascha@330: * src/test/ressources/conf.xml: sascha@330: Changed the Key for the DataName of MIN-Max-Transitions to put a propper Name tim@190: into the UI-Describeoutput issue47 sascha@330: * src/main/java/de/intevation/gnv/transition/TransitionBase.java (describe): tim@190: Added the X-Forms-Group-Element to surround the MinMaxDescibeObject-output to Give the tim@190: Group of Objects a propper Name issue47 sascha@330: * src/main/java/de/intevation/gnv/transition/MinMaxTransition.java (purifyResult): tim@190: Added the name of the Data to the MinMaxDescibeObject to put it into the UI-output tim@190: tim@189: 2009-10-16 Tim Englich tim@189: hans@259: Issue 53: Changing of strings in parameter panel hans@259: sascha@330: * src/test/ressources/timeseries_mesh/timeseries_step_05_feed.xml: sascha@330: src/test/ressources/conf.xml: sascha@330: src/main/resources/lang/artifactMessages*.properties: tim@189: Conformation to the tanslation of the MeshObjects issue53 tim@189: tim@187: 2009-10-16 Tim Englich tim@187: hans@259: Issue 49: Integration of FIS to Meshes hans@259: sascha@330: * src/test/ressources/queries.properties: tim@188: There are different FIS in the Relation Median.Mesh so it is tim@188: nessessary to sepcify which FIS should be selected by using the sourceid tim@188: issue49 sascha@330: * src/test/ressources/conf.xml: tim@188: Adding two further FIS to the Configuration which are based on Meshes. tim@188: Added the Sourceid to the ModelData issue49 tim@188: * src/main/resources/lang/artifactMessages*.properties: tim@189: Adding the Names of the two new FIS to the Propertiesfiles issue49 tim@188: tim@188: 2009-10-16 Tim Englich sascha@330: sascha@330: * src/main/java/de/intevation/gnv/chart/HorizontalProfileChartFactory.java (createXYSeries): tim@187: Adding 5% bigger Valuearea to the Chart according to GT0030.011 hans@259: tim@180: 2009-10-16 Tim Englich tim@180: sascha@330: * src/main/java/de/intevation/gnv/transition/profile/vertical/VerticalProfileOutputTransition.java (VerticalProfileOutputTransition): sascha@330: Changed Domainlable for Verticalprofiles according to the Specification GT_0030.005 sascha@330: * src/test/java/de/intevation/gnv/artifacts/util/DistanceCalculatorTestCase.java (testDistanceCalculator): tim@185: Added Testcase for the DistanceCalculation sascha@330: * src/main/java/de/intevation/gnv/chart/HorizontalProfileChartFactory.java (createXYSeries): sascha@330: * src/main/java/de/intevation/gnv/utils/DistanceCalculator.java (calculateDistance): tim@186: Added Calculation of the Distance in the unit km for Geodetic-Coordinates according to the Specification GT_0030.005 sascha@330: * src/main/java/de/intevation/gnv/transition/profile/horizontal/HorizontalProfileOutputTransition.java (HorizontalProfileOutputTransition): tim@186: Changed Domainlable for Horizintalprofiles according to the Specification GT_0030.005 sascha@330: tim@185: 2009-10-16 Tim Englich sascha@330: tim@184: * src/test/ressources/queries.properties: tim@184: The Levelnumber of Meshes will also be visualized in the choose of depth GT_0020.0020 tim@184: tim@184: 2009-10-16 Tim Englich sascha@330: sascha@330: * src/test/ressources/conf.xml: tim@183: Added Coordinate-Values to Title of the TimeseriesDiagramm for Meshes sascha@330: tim@183: 2009-10-16 Tim Englich sascha@330: sascha@330: * src/main/java/de/intevation/gnv/transition/OutputTransitionBase.java (putInputData): tim@182: Bugfix ChartValues were not Recalculated after feed was called second Time. sascha@330: tim@182: 2009-10-16 Tim Englich sascha@330: sascha@330: * src/test/ressources/conf.xml: tim@181: Bugfix in MinMaxTransition the Maxvalue was not the correct Value. sascha@330: hans@259: 2009-10-16 Tim Englich hans@259: hans@259: Issue 38: Horizontal profiles: Visualization of distances in km tim@182: sascha@330: * src/main/java/de/intevation/gnv/transition/CoordinateSelectionTransition.java (convert2DisplayCoordinate): tim@180: Added Transformation from WKT-Coordinate Reperesentation to BSH-Coordinate Representation. issue38 tim@180: tim@179: 2009-10-15 Tim Englich tim@179: sascha@330: * src/main/java/de/intevation/gnv/chart/HorizontalProfileChartFactory.java, sascha@330: src/main/java/de/intevation/gnv/chart/VerticalProfileChartFactory.java, sascha@330: src/main/java/de/intevation/gnv/transition/profile/horizontal/HorizontalProfileOutputTransition.java, hans@259: src/main/java/de/intevation/gnv/transition/profile/vertical/VerticalProfileOutputTransition.java, hans@259: src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java, sascha@330: src/test/ressources/queries.properties, src/test/ressources/conf.xml: hans@259: Added missing Class Description Values to the Horizontal Profile Charts sascha@330: tim@177: 2009-10-15 Tim Englich tim@177: sascha@330: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java (getFisName): tim@178: Added Method for lookup FIS Names sascha@330: * src/main/resources/lang/artifactMessages*.properties: tim@178: Added further Key-Value-Pairs for FIS sascha@330: * src/test/ressources/conf.xml: tim@178: Changed Configuratioon to get the ID of an FIS to the Chartgeneration sascha@330: tim@178: 2009-10-15 Tim Englich sascha@330: sascha@330: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (testHorizontalProfileMeshPointArtifact): tim@177: Activate Tests for CSV and Statistics on HorizontalProfiles sascha@330: hans@260: * hans@260: src/main/java/de/intevation/gnv/transition/profile/horizontal/HorizontalProfileOutputTransition.java hans@260: (createCSV), hans@260: src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java hans@260: (createCSV): sascha@330: Integrated special CSV-Export for HorizontalProfiles tim@177: tim@176: 2009-10-14 Tim Englich tim@176: tim@176: * src/main/java/de/intevation/gnv/chart/HorizontalProfileChartFactory.java (createXYSeries): tim@176: Load WKT from ResultSet and calculate Distance to last point. sascha@330: * src/test/ressources/queries.properties: tim@176: Switch Chart-Queries to Spatial-Queries. tim@176: tim@175: 2009-10-13 Tim Englich tim@175: hans@259: Issue 33: Improved logging for time-interval queries hans@259: tim@175: * src/test/ressources/queries.properties, tim@175: src/test/ressources/conf.xml: tim@175: Added Parameter-Usage in Time-Interval-Query ISSUE-33 tim@175: tim@174: 2009-10-13 Tim Englich tim@174: sascha@330: * src/test/ressources/verticalprofile_mesh/verticalprofile_step_*_feed.xml, sascha@330: src/test/ressources/horizontalProfile_mesh/horizontalprofile_step_*_feed.xml: sascha@330: Switched to Szenario where it is possible to select Data using the Coordinate. tim@174: * src/test/ressources/conf.xml, tim@174: src/test/ressources/queries.properties: hans@260: Switched to SFS-Conformant-Queries in HorzintalProfile- and VerticalProfile-Mesh hans@260: tim@173: 2009-10-13 Tim Englich tim@173: sascha@330: * src/main/resources/lang/artifactMessages_*.properties: hans@259: Switched to better Description of an Coordinate-Input-Field hans@259: hans@259: * src/test/ressources/timeseries_mesh/timeseries_*_feed.xml: hans@259: Switched to Szenario where it is possible to select Data using the Coordinate. hans@259: sascha@330: * src/test/ressources/queries.properties, src/test/ressources/conf.xml: hans@259: Switched to SFS-Conformant-Queries in Timeseries-Mesh hans@259: sascha@330: * pom.xml: hans@259: Added dependency to JTS 1.9 hans@259: sascha@330: * src/main/java/de/intevation/gnv/utils/exception/ValidationException.java hans@259: (ValidationException), src/main/java/de/intevation/gnv/utils/InputValidator.java hans@259: (getPointValue), src/main/java/de/intevation/gnv/transition/TransitionBase.java hans@259: (prepareInputData4RegionDBQuery): hans@259: Added the Support for specialized Handling of InputValues of type Coordinate. hans@259: hans@259: * src/main/java/de/intevation/gnv/transition/CoordinateSelectionTransition.java: hans@259: Added Transition for the Support of Coordinateinput handling. hans@259: sascha@172: 2009-10-12 Sascha L. Teichmann sascha@172: sascha@172: * src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContextFactory.java: sascha@172: Closed small file descriptor leak. sascha@172: tim@171: 2009-10-09 Tim Englich tim@171: tim@171: * src/main/java/de/intevation/gnv/**/*.java Edited: tim@171: Code Formatting and Cleanup. sascha@330: tim@170: 2009-10-09 Tim Englich tim@170: tim@170: * src/test/ressources/queries.properties Edited: tim@170: Add Parameters to the Queries to select only the Dates where sascha@330: the Parameters has been measured. tim@170: * src/test/ressources/conf.xml Edited: sascha@330: Set that the ParameterIds should be used in the Query of the Dates. tim@170: sascha@126: 2009-10-07 Sascha L. Teichmann sascha@126: sascha@126: RELEASE 0.1 sascha@126: sascha@126: * Changes, NEWS: Summarized changes. sascha@126: tim@123: 2009-10-06 Tim Englich tim@123: tim@125: * src/main/java/de/intevation/gnv/transition/profile/horizontal/HorizontalProfileOutputTransition.java (HorizontalProfileOutputTransition) Edited : tim@125: Switch Lable-Value for Domain-Axis. tim@123: * src/main/java/de/intevation/gnv/artifacts/ressource/RessourceFactory.java (getRessource) Edited: sascha@330: Added missing Import tim@123: * src/main/java/de/intevation/gnv/transition/profile/horizontal/NorthSouthEastWestTransition.java (advance) Edited: sascha@330: Added i18n Support tim@123: * src/main/resources/lang/artifactMessages*.properties Edited: sascha@330: Added some missing RessourceValues tim@123: sascha@122: 2009-10-06 Sascha L. Teichmann sascha@122: sascha@122: * src/test/ressources/verticalprofile_instantaneouspoint/verticalprofile_step_04_out_csv.xml, sascha@122: src/test/ressources/conf.xml, sascha@122: src/test/ressources/timeseries_mesh/timeseries_step_07_out_csv.xml, sascha@122: src/test/ressources/verticalprofile_mesh/verticalprofile_step_06_out_csv.xml, sascha@122: src/test/ressources/horizontalProfile_mesh/horizontalprofile_step_08_out_csv.xml, sascha@122: src/test/ressources/verticalprofile/verticalprofile_step_04_out_csv.xml: sascha@122: s@test/plain@text/plain@g to correct MIME type of CSV export sascha@122: sascha@121: 2009-10-06 Sascha L. Teichmann sascha@121: sascha@121: * src/main/java/de/intevation/gnv/artifacts/ressource/*.properties: sascha@121: Deleted. sascha@121: sascha@121: * src/main/resources/lang/*.properties: Re-inserted here. Maven now sascha@121: includes them in the jar package. sascha@121: sascha@121: * src/main/java/de/intevation/gnv/artifacts/ressource/RessourceFactory.java: sascha@121: Make code more robust. TODO: We need a better implementation here. sascha@121: sascha@121: * Changelog -> ChangeLog: To make eclipse happy. Unified changelog style. sascha@121: sascha@121: * pom.xml: xmllint-ed and set encoding of filtered resources to UTF-8 sascha@121: sascha@121: 2009-10-06 Tim Englich sascha@121: sascha@121: * src/test/ressources/queries.properties Edited: sascha@121: Bugfix in Query for getting Data for the Output. sascha@121: Now the Values will be sorted Correcly. Timevalue sascha@121: has been removed from the Query because it is not a sascha@121: Parameter which could be choosen from the User. sascha@330: Also dummies for XCOORD-Value and YCOORD-Value integrated so sascha@121: that is now Possible to visualize the Profile sascha@121: gnv/issue21 sascha@121: sascha@121: 2009-10-05 Tim Englich sascha@121: sascha@121: * src/main/java/de/intevation/gnv/artifacts/ressource/artifactMessages*.properties Edited: sascha@330: Added further Ressourec Values. sascha@121: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (testVerticalProfileInstantaneousPointArtifact) Edited: sascha@330: Changed ArtifactName to real FIS. sascha@121: * src/test/ressources/timeseries_mesh/timeseries_step_01_feed.xml Edited: sascha@330: Changed Product-Name from timeSeriesMesh to timeSeries to provide a General-Naming-Structure sascha@121: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java (setup) Edited, sascha@121: src/main/java/de/intevation/gnv/transition/profile/horizontal/HorizontalProfileOutputTransition.java Edited, sascha@121: src/main/java/de/intevation/gnv/transition/profile/vertical/VerticalProfileOutputTransition.java Edited: sascha@330: Added Configurationsupport for the Labeling Data. Now it is possible do define the sascha@330: value-names in the Configurationfile. sascha@330: * src/test/ressources/verticalprofile_instantaneouspoint/verticalprofile_step_03_feed.xml Edited, sascha@330: src/test/ressources/verticalprofile_instantaneouspoint/verticalprofile_step_02_feed.xml Edited, sascha@330: src/test/ressources/queries.properties Edited: sascha@121: Changed the Queries for the VerticalProfileInstantaneusPoint to the FIS-Query Mode. sascha@121: This Mode was send by Mr. Schulz-Ohlberg. sascha@330: * src/test/ressources/conf.xml: sascha@121: Changed the Workflow for the VerticalProfileInstantaneusPoint to the FIS-Query Mode. sascha@121: This Mode was send by Mr. Schulz-Ohlberg. sascha@121: Also Added the support for value-names to the Configuration of VerticalProfileInstantaneusPoint. sascha@121: sascha@121: 2009-10-05 Tim Englich sascha@121: sascha@121: * src/main/java/de/intevation/gnv/artifacts/ressource/artifactMessages_en.properties Renamed: sascha@121: Renamed from artifactMessages_en_EN.properties to artifactMessages_en.properties to get a sascha@121: propper support for PreferedLocale sascha@330: * src/main/java/de/intevation/gnv/artifacts/ressource/RessourceFactory.java (getRessource) Edited, sascha@121: * src/test/java/de/intevation/gnv/artifacts/ressource/RessourceFactoryTestCase.java (setUp) Edited, sascha@121: * src/main/java/de/intevation/gnv/transition/TransitionBase.java (describe) Edited, sascha@121: * src/main/java/de/intevation/gnv/artifacts/fis/FISArtifact.java (createSelectBox) Edited: sascha@121: Changed Method Signature from Locale to PreferedLocale[] to put all Useable Languages to sascha@121: the RessourceFactory sascha@330: sascha@121: 2009-10-02 Tim Englich sascha@121: sascha@330: * src/test/java/de/intevation/gnv/artifacts/ressource/RessourceFactoryTestCase.java Added: sascha@121: TestCase for Testing the RessourceFactory sascha@330: sascha@330: * src/main/java/de/intevation/gnv/artifacts/ressource/artifactMessages*.properties Added, sascha@330: src/main/java/de/intevation/gnv/artifacts/ressource/RessourceFactory.java Added: sascha@121: Added Factory and Propertiesfiles for getting the localized Values sascha@330: sascha@330: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java Edited, sascha@330: src/main/java/de/intevation/gnv/transition/profile/horizontal/NorthSouthEastWestTransition.java Edited, sascha@330: src/main/java/de/intevation/gnv/transition/TransitionBase.java Edited, sascha@121: src/main/java/de/intevation/gnv/transition/Transition.java Edited, sascha@121: src/main/java/de/intevation/gnv/transition/OutputTransitionBase.java Edited, sascha@121: src/main/java/de/intevation/gnv/transition/OutputTransition.java Edited, sascha@121: src/main/java/de/intevation/gnv/timeseries/TimeSeriesArtifact.java Edited, sascha@121: src/main/java/de/intevation/gnv/profile/vertical/VerticalProfileArtifact.java Edited, sascha@330: src/main/java/de/intevation/gnv/profile/horizontal/HorizontalProfileArtifact.java Edited, sascha@330: src/main/java/de/intevation/gnv/artifacts/fis/FISArtifact.java Edited, sascha@330: src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java Edited: sascha@121: LanguageSupport Integrated sascha@330: sascha@121: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (createCallContext) Edited: sascha@121: Extracted Method and Put CallMeta with Language German to the CallContext. Otherwise sascha@330: TestCase will produce NPEs. sascha@121: * src/test/java/de/intevation/gnv/artifacts/TestCallContext.java Edited: sascha@121: Added Real CallMeta to the Method for usage in Artifacts. Otherwise sascha@330: TestCase will produce NPEs. sascha@330: * src/test/ressources/horizontalProfile_mesh/horizontalprofile_step_02_feed.xml Edited, sascha@330: src/test/ressources/timeseries_mesh/timeseries_step_02_feed.xml Edited, sascha@330: src/test/ressources/verticalprofile_mesh/verticalprofile_step_02_feed.xml Edited, sascha@121: src/test/ressources/conf.xml Edited: sascha@330: Changed som Identifiers for Localisation. sascha@121: sascha@121: 2009-10-02 Tim Englich sascha@121: sascha@121: * src/test/ressources/conf.xml Edited: sascha@121: Added the Configuration of the Horizontal-Profile.Mesh. sascha@121: Also Edited the Workflowq for HorizontalProfile-Instantaneouspoint and sascha@121: Put three n ew FIS into the Configuration which represents HorizontalProfile-Instantaneouspoint. sascha@330: * src/test/ressources/horizontalProfile_instantaneouspoint/*.xml Edited, sascha@121: src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (testHorizontalProfileInstantaneousPointArtifact) Edited: sascha@121: Edited the Workflowlogic given by new Specification of the BSH. sascha@121: * src/test/ressources/horizontalProfile_mesh/*.xml Added: sascha@121: The Request for do an Workflow for an HorizontalProfile-Mesh sascha@121: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (testHorizontalProfileMeshPointArtifact) Edited: sascha@121: Added TestCase for HorizontalProfiles of Type Mesh. sascha@121: * src/test/java/de/intevation/gnv/artifacts/TestCallContext.java (getMeta) Edited: sascha@330: Added new Method which is defined in the implemented Interface. sascha@121: * src/main/java/de/intevation/gnv/utils/InputValidator.java (isInputValid) Edited: sascha@121: Added the Validation of InputValues from Type AttributeName which should represent sascha@121: an QueryValue of Type String which must not put into "'". sascha@121: * src/main/java/de/intevation/gnv/transition/profile/horizontal/NorthSouthEastWestTransition.java Added: sascha@330: Transition to provide the possibility of choosing the axis of an Grid that should be used. sascha@121: * src/main/java/de/intevation/gnv/transition/TransitionBase.java (dataMultiSelect) Edited: sascha@330: Changed from private to protected so that this mMeber could be accessed by within extending Classes. sascha@121: * src/main/java/de/intevation/gnv/profile/horizontal/HorizontalProfileMeshArtifact.java Added: sascha@121: Class for the Representation of Horizontal Profiles for the Type Mesh. sascha@121: * src/main/java/de/intevation/gnv/chart/HorizontalProfileChartFactory.java (HorizontalProfileChartFactory) Edited: sascha@330: Changed PlotOrientation so that the Profile is displayed correctly. sascha@121: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java (advance) Edited: sascha@330: Added Log-Message for better Workflowanalyzis. sascha@330: sascha@121: 2009-10-01 Sascha L. Teichmann sascha@121: sascha@121: * src/main/java/de/intevation/gnv/artifacts/fis/FISArtifact.java, sascha@121: src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java, sascha@121: src/main/java/de/intevation/gnv/utils/ArtifactFactoryUtilities.java, sascha@121: src/main/java/de/intevation/gnv/timeseries/TimeSeriesArtifact.java, sascha@121: src/main/java/de/intevation/gnv/transition/MinMaxTransition.java, sascha@121: src/main/java/de/intevation/gnv/transition/profile/vertical/VerticalProfileOutputTransition.java, sascha@121: src/main/java/de/intevation/gnv/statistics/TimeseriesStatistics.java: sascha@121: Removed needless imports. sascha@121: sascha@121: * src/main/java/de/intevation/gnv/utils/InputValidator.java: sascha@121: Import org.apache.commons.validator.GenericValidator instead of sascha@121: absolute usage in methods. sascha@121: sascha@121: 2009-09-30 Tim Englich sascha@121: sascha@121: * src/test/ressources/queries.properties Edited: sascha@121: Added the Queries for HorizontalProfiles of InstantaneousPoints. sascha@121: * src/test/ressources/conf.xml Edited: sascha@121: Added the Configuration for HorizontalProfilArtifact for InstantaneousPoints sascha@121: * src/test/ressources/horizontalProfile_instantaneouspoint/*.xml Added: sascha@121: Added XML-Requests for the TestCase of HorizontalProfiles of InstantaneousPoints. sascha@121: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (testHorizontalProfileInstantaneousPointArtifact) Edited: sascha@121: Added TestCase for HorizontalProfiles of InstantaneousPoints. sascha@330: sascha@121: 2009-09-30 Tim Englich sascha@121: sascha@121: * src/main/java/de/intevation/gnv/utils/InputValidator.java (isInputValid) Edited: sascha@330: Added the Validation for Double-Values. sascha@121: * src/main/java/de/intevation/gnv/transition/profile/vertical/VerticalProfileOutputTransition.java (createChart) Edited: sascha@330: The Name of the Method for generaing Charts has changed. sascha@121: * src/main/java/de/intevation/gnv/transition/profile/horizontal/HorizontalProfileOutputTransition.java Added: sascha@330: New outputTransition for HorizontalProfiles sascha@121: * src/main/java/de/intevation/gnv/statistics/HorizontalProfileStatistics.java Added: sascha@330: Class which calculates the Statistics for Horizontal Profiles. sascha@330: * src/main/java/de/intevation/gnv/profile/horizontal/HorizontalProfileInstantaneousPointArtifact.java Added, sascha@121: * src/main/java/de/intevation/gnv/profile/horizontal/HorizontalProfileArtifact.java Added: sascha@330: Classes which represents HorizontalProfileArtifacts sascha@121: * src/main/java/de/intevation/gnv/chart/VerticalProfileChartFactory.java (plotOrientation) Edited: sascha@330: Added Member for the representation of the Plotorientation to overwrite it in sascha@121: extende Classes sascha@330: Rename Method for generatim the Charts in a common Name. sascha@121: * src/main/java/de/intevation/gnv/chart/HorizontalProfileChartFactory.java Added: sascha@121: Class for drawing Horzontal Profiles sascha@330: sascha@121: 2009-09-30 Sascha L. Teichmann sascha@121: sascha@121: * src/test/ressources/conf.xml: s@test/xml@text/xml@g sascha@121: sascha@121: 2009-09-29 Tim Englich sascha@121: sascha@121: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (doNextStep) Edited: sascha@330: Add Responsevalidation for feed-Requests. sascha@121: * pom.xml Edited: sascha@121: Add required Library ORO to the Dependencies which is required by Commons-Validator sascha@121: to do matchRegexp Requests. sascha@121: * src/main/java/de/intevation/gnv/utils/InputValidator.java (isInputValid) Edited: sascha@330: Add a Validator for the type Point sascha@121: * src/test/ressources/conf.xml Edited: sascha@121: Changed mesh_coordinate from type Integer to type Point sascha@330: sascha@121: 2009-09-29 Tim Englich sascha@121: sascha@330: * src/main/java/de/intevation/gnv/chart/VerticalProfileChartFactory.java (findValueTitle): sascha@121: Key of KeyValueDescribeData is a String. So it is not nessessary to parse the sascha@121: id into an Integer Value. sascha@121: Also some NP-Access removed. sascha@330: sascha@121: 2009-09-29 Tim Englich sascha@121: sascha@121: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java Edited: sascha@121: Some Coderedundances refactored. sascha@330: sascha@121: 2009-09-29 Tim Englich sascha@121: sascha@121: * src/test/ressources/queries.properties Edited: sascha@330: Bug fixed: Mesh TimeSeries will now Handle Charts with multiple Depth-Values properly. sascha@330: sascha@121: 2009-09-29 Tim Englich sascha@121: sascha@121: * src/test/ressources/timeseries_mesh/*.xml Added : sascha@330: TestCaseRequests for Timeseries FIS Mesh sascha@121: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (testTimeSeriesMeshArtifact) Edited: sascha@330: Add Testcase for Timeseries Mesh sascha@330: sascha@121: 2009-09-29 Tim Englich sascha@121: sascha@121: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (check4ExceptionReport) edited: sascha@121: ExceptionTest for Responsdocuments added. sascha@121: UnitTest will now fail if the Artifact delivers an ExceptionReport using the advance Request. sascha@330: sascha@121: 2009-09-29 Tim Englich sascha@121: sascha@121: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (testVerticalProfileMeshArtifact) Edited: sascha@330: Added TestCase for Vertical Profiles for Mesh sascha@121: * src/test/ressources/verticalprofile_mesh/*.xml Added: sascha@330: TestCaseRequests for VerticalProfile FIS Mesh sascha@330: sascha@121: 2009-09-29 Tim Englich sascha@121: sascha@121: * src/main/java/de/intevation/gnv/utils/InputValidator.java (isInputValid) Edited: sascha@330: Bugfix: Remove leading- and trailingwhitspaces from Date- and Integervalues sascha@330: sascha@121: 2009-09-29 Tim Englich sascha@121: sascha@330: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (testVerticalProfileArtifact): sascha@121: (testVerticalProfileInstantaneousPointArtifact) Edited: sascha@330: Added Testcases for VerticalProfile and VerticalProfile Instantaneouspoint sascha@121: * src/test/ressources/verticalprofile_instantaneouspoint/*.xml Added: sascha@121: TestCaseRequests for VerticalProfile Instantaneouspoint sascha@121: * src/test/ressources/verticalprofile/*.xml Added: sascha@121: TestCaseRequests for VerticalProfile FIS Marnet sascha@330: sascha@121: 2009-09-29 Tim Englich sascha@121: sascha@121: * src/test/ressources/queries.properties Edited: sascha@330: Remove to_date from TimeSeries-Quueries becaus of Changes in the conf.xml-File sascha@121: * src/test/ressources/conf.xml Edited: sascha@330: Correct Types for min- and max-Values from Integer to Date sascha@121: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java (testTimeSeriesArtifact) Edited: sascha@330: Add CallContext to the Tests. sascha@121: * src/test/java/de/intevation/gnv/artifacts/TestCallContext.java Add: sascha@121: A CallContext used only in Junit-Tests sascha@330: sascha@121: 2009-09-29 Tim Englich sascha@121: sascha@330: * pom.xml Edited: sascha@121: Added the dependency to Apache-Commons-Validator Version 1.3.1 which is sascha@121: used for the InputValoue-validation. sascha@330: * src/main/java/de/intevation/gnv/utils/InputValidator.java Added : sascha@121: An InputValidator for Validating InputValues. sascha@121: At this Moment only Integer, String and Date is supported. sascha@121: * src/main/java/de/intevation/gnv/transition/TransitionBase.java (putInputData) Edited: sascha@121: Add the InputValidator to validate the incomming Values from the Clients. sascha@330: sascha@121: 2009-09-28 Tim Englich sascha@121: sascha@121: * src/main/java/de/intevation/gnv/chart/ChartFactory.java (createTimeSeries) Edited: sascha@121: Performanceimprovement: The Loop will be interrupted if the Pointer is bigger than the sascha@121: last Pointer of the Value that must be visualised. sascha@330: sascha@121: 2009-09-28 Tim Englich sascha@121: sascha@121: * pom.xml Edited: sascha@121: Added the Dependeny to the ehcache-Library sascha@121: * src/test/ressources/ehcache.xml Added: sascha@330: The ehcache-Configuration. sascha@121: * src/test/ressources/conf.xml Edited: sascha@330: Added the Link to the ehcache-Configuration. sascha@121: * src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContextFactory.java (createArtifactContext) Edited: sascha@330: Added the Initialisation of the CacheManager. sascha@330: sascha@121: * src/main/java/de/intevation/gnv/artifacts/cache/CacheFactory.java Added: sascha@330: An Fractoryimplementation for the central access to the Cache. sascha@330: sascha@121: * src/main/java/de/intevation/gnv/transition/MinMaxTransition.java (purifyResult) Edited, sascha@330: * src/main/java/de/intevation/gnv/transition/SingleInputTransition.java (purifyResult) Edited, sascha@121: * src/main/java/de/intevation/gnv/transition/Transition.java Edited, sascha@330: * src/main/java/de/intevation/gnv/transition/TransitionBase.java Edited, sascha@330: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java Edited: sascha@330: Signature of Methods purifyResults, advanced and feed Changed to put the uuid to the Transition sascha@121: * src/main/java/de/intevation/gnv/transition/profile/vertical/VerticalProfileOutputTransition.java (createChart) Edited: sascha@121: Methodsignatur of getChartResult change for putting the uuid of an Artifact into it sascha@330: * src/main/java/de/intevation/gnv/transition/OutputTransition.java (out) Edited, sascha@121: src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java (out) Edited: sascha@330: Method Signature Changed for putting the uuid of an Artifact to the Transition. sascha@330: stored sascha@121: * src/main/java/de/intevation/gnv/transition/OutputTransitionBase.java Edited: sascha@330: removed the persitence of the Chartresults and put them into an Cache instance. sascha@330: sascha@121: 2009-09-28 Tim Englich sascha@121: sascha@121: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java (getStatisticsGenerator) Edited: sascha@121: Extracted the Instantiation of the Statistics-object to an protected Methode sascha@330: to make it possible that extending Classes could change it. sascha@121: * src/main/java/de/intevation/gnv/transition/profile/vertical/VerticalProfileOutputTransition.java (getStatisticsGenerator) Edited: sascha@121: Overwrite getStatisticsGenerator to instantiate the VerticalProfileStatistics- sascha@121: * src/main/java/de/intevation/gnv/statistics/VerticalProfileStatistics.java Added: sascha@121: Class for Calculating Statistics for VerticalProfiles- The Only thing whisch differs to sascha@330: TimeSeriesStatists is that the XoordinateValue is an double and not an Date-Value sascha@121: * src/main/java/de/intevation/gnv/statistics/TimeseriesStatistics.java (calculateXOrdinateValue) Edited: sascha@121: Added the Methode calculateXOrdinateValue to this Class to switch is Values in extending Classes. sascha@121: * src/main/java/de/intevation/gnv/statistics/Statistics.java (calculateStatistics) Edited: sascha@121: Added methodsignature to Interface for usage in different Implementations of Statistics. sascha@330: sascha@121: 2009-09-28 Tim Englich sascha@121: sascha@121: * src/main/java/de/intevation/gnv/statistics/TimeseriesStatistics.java (calculateStatistics) Edited: sascha@121: Bug fixed. Now all Values will be used to calculate the Statistics sascha@330: sascha@121: 2009-09-28 Tim Englich sascha@121: sascha@121: * src/test/ressources/conf.xml Edited : sascha@121: Changed the Output-format of Statistics from text/plain to text/xml. sascha@330: sascha@121: 2009-09-28 Tim Englich sascha@121: sascha@121: * src/main/java/de/intevation/gnv/statistics/TimeseriesStatistics.java Edited: sascha@121: Moved the calculating-Methods from the Conmstructor to an separat Method. sascha@330: Switched the ResultContainer from Array to Collection sascha@121: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java (out) Edited: sascha@121: Added the Output-Variante for generating Statistics sascha@121: sascha@121: 2009-09-28 Tim Englich sascha@121: sascha@330: * pom.xml Edited: sascha@121: Added Link to Apache-Commons-Math to get the required Classes for the calculation sascha@121: of Statistics. sascha@121: * src/main/java/de/intevation/gnv/statistics/exception/StatisticsException.java Added: sascha@330: Specified ExceptionClass for the Statistics Part of the gnv-artifacts sascha@121: * src/main/java/de/intevation/gnv/statistics/TimeseriesStatistics.java Edited: sascha@330: Remove compileErrors and switch to new Datastructure sascha@121: sascha@121: 2009-09-28 Tim Englich sascha@121: sascha@330: * src/main/java/de/intevation/gnv/statistics/Statistic.java Added , sascha@330: src/main/java/de/intevation/gnv/statistics/Statistics.java Added , sascha@121: src/main/java/de/intevation/gnv/statistics/TimeseriesStatistics.java Added: sascha@330: Imported Statistics-Classes from old Project. Revision: 3101 Does not compile sascha@330: sascha@121: 2009-09-25 Tim Englich sascha@121: sascha@121: * src/test/ressources/conf.xml Edited: sascha@121: Added with and height Inputparameter to each Chart-OutputMode. sascha@330: sascha@121: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java (out) Edited: sascha@121: Added the usage of the Parameters revieved from the client for the ChartRendering sascha@330: sascha@330: * src/main/java/de/intevation/gnv/transition/DefaultInputValue.java (DefaultInputValue) (getDefaultValue) Edited , sascha@121: src/main/java/de/intevation/gnv/transition/InputValue.java (getDefaultValue) Edited: sascha@121: Added the Method getDefaultValue to the Interface for getting the sascha@121: deafultvalue of an Parameter. sascha@330: sascha@330: * src/main/java/de/intevation/gnv/transition/DefaultOutputMode.java Edited, sascha@121: src/main/java/de/intevation/gnv/transition/OutputMode.java (getInputParameters) Edited: sascha@330: Added the Method getInputParameters to the OutputMode for Handling the required Parameters sascha@330: of an OutputMode. sascha@330: sascha@121: * src/main/java/de/intevation/gnv/transition/OutputTransition.java (out) Edited: sascha@330: Put the InputParameter recived from the Client to the Methodsignature so that sascha@330: they can be used during the outputprocessing. sascha@330: sascha@121: * src/main/java/de/intevation/gnv/transition/OutputTransitionBase.java Edited: sascha@330: Read rquired Outputparameters from the Configuration sascha@330: sascha@121: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java Edited: sascha@330: Added support for Parameters in OutputNode of Describe-Artifact sascha@330: sascha@121: 2009-09-24 Tim Englich sascha@121: sascha@121: * pom.xml Edited: sascha@330: Added Library for CSV-Support sascha@121: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java (out) Edited: sascha@330: Add support for CSV-Export sascha@121: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java (out) Edited: sascha@330: Add Fag on Context for storing the Artifact status after out. sascha@330: sascha@121: 2009-09-24 Tim Englich sascha@121: sascha@121: * src/main/java/de/intevation/gnv/utils/ArtifactXMLUtilities.java (createSuccessReport) Edited: sascha@330: Added a centraL Method for creating an Successreoprt. sascha@330: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java Edited, sascha@330: src/main/java/de/intevation/gnv/artifacts/fis/FISArtifact.java Edited: sascha@121: Add ResultReporting to the different Metshods of an Artifact sascha@330: sascha@121: 2009-09-24 Tim Englich sascha@121: sascha@121: * src/main/java/de/intevation/gnv/chart/VerticalProfileChartFactory.java Edited: sascha@330: Obsolet TODOs removed sascha@330: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java Edited, sascha@330: src/main/java/de/intevation/gnv/artifacts/fis/FISArtifact.java Edited, sascha@121: src/main/java/de/intevation/gnv/transition/TransitionBase.java Edited: sascha@330: Create Exception Report added sascha@121: * src/main/java/de/intevation/gnv/utils/ArtifactXMLUtilities.java (createExceptionReport) Edited: sascha@330: Method for creating Exceptionreports added. sascha@330: sascha@121: 2009-09-24 Tim Englich sascha@121: sascha@121: * src/test/ressources/queries.properties Edited: sascha@121: Queries formatted so that they can be analysed and extended easier. sascha@330: Some Bugs removed sascha@330: sascha@121: 2009-09-24 Tim Englich sascha@121: sascha@330: * src/main/java/de/intevation/gnv/chart/VerticalProfileChartFactory.java Edited, sascha@121: src/main/java/de/intevation/gnv/chart/ChartLabels.java Edited, sascha@121: src/main/java/de/intevation/gnv/chart/ChartFactory.java Edited: sascha@121: Removed obsolet Parameters an Methods. sascha@330: Use the ChartLable to put the DomainAxisLable into the Chart. sascha@330: sascha@121: * src/main/java/de/intevation/gnv/transition/OutputTransitionBase.java Edited: sascha@121: Some more Loggingoutput integrated. sascha@121: Some Performanceimprovements done. The ResultData will only be refreshed if sascha@121: the InputValues has changed. sascha@121: Some Refactoring Work done. Move some Members into from extending Classes sascha@121: into this implementation. sascha@330: * src/main/java/de/intevation/gnv/transition/profile/vertical/VerticalProfileOutputTransition.java Edited, sascha@121: src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java Edited: sascha@330: Dummywerte fuer Diagrammgenerierung durch Echtwerte ersetzt. sascha@330: Obsolete Uebergabeparameter entfernt. sascha@330: sascha@121: 2009-09-23 Tim Englich sascha@121: sascha@121: * src/test/ressources/queries.properties Edited: sascha@330: Statements for InstantaneousPoint Vertical Profiles added sascha@121: * src/test/ressources/conf.xml Edited: sascha@121: Configuration for Vertikal Profiles for InstantaneousPoints added sascha@121: * src/main/java/de/intevation/gnv/profile/vertical/VerticalProfileInstantaneousPointArtifact.java (VerticalProfileInstantaneousPointArtifact) Added: sascha@330: New Artifact-Class Reperesenting Artifacts for InstantaneousPoints Creating VerticalProfiles added. sascha@330: sascha@121: 2009-09-23 Tim Englich sascha@121: sascha@121: * src/main/java/de/intevation/gnv/transition/TransitionBase.java (prepareInputData4DateDBQuery) Edited: sascha@121: Bug Fixed, now all Inputvalues of String and Date will be put into the Query sascha@330: sascha@121: 2009-09-23 Tim Englich sascha@121: sascha@121: * src/main/java/de/intevation/gnv/chart/VerticalProfileChartFactory.java (createXYSeries) Edited: sascha@330: Bug fixed. Now all Values will be Renderd to the Chart sascha@121: * src/main/java/de/intevation/gnv/profile/vertical/VerticalProfileMeshArtifact.java Added: sascha@121: Artifact-class for VerticalProfile Mesh added sascha@121: * src/main/java/de/intevation/gnv/transition/TransitionBase.java Edited: sascha@330: Support for StringQuieries and OracleDateQueries added sascha@330: * src/test/ressources/queries.properties Edited: sascha@121: Queries for VerticalProfile Mesh integrated sascha@121: * src/test/ressources/conf.xml Edited: sascha@121: Artifact for VerticalProfile Mesh integrated sascha@330: sascha@121: 2009-09-22 Tim Englich sascha@121: sascha@121: * src/test/ressources/queries.properties Edited: sascha@121: Added Queries for the Workfloe of collecting the sascha@330: required Information to generate a vertical Profile sascha@330: * src/test/ressources/conf.xml Edited: sascha@121: Added the Configuration of the VerticalProfileArtifact sascha@121: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java (getCollection) Edited: sascha@330: Some Codrefactoring done for reuse of Functionality in extended Classes. sascha@121: * src/main/java/de/intevation/gnv/transition/profile/vertical/VerticalProfileOutputTransition.java Added: sascha@330: Outputtransition for the Support of VerticalPropfiles sascha@121: * src/main/java/de/intevation/gnv/transition/describedata/KeyValueDescibeData.java (getKey), sascha@330: src/main/java/de/intevation/gnv/transition/describedata/DefaultKeyValueDescribeData.java (getKey) Edietd, sascha@121: src/main/java/de/intevation/gnv/transition/TransitionBase.java (purifyResult) Edited: sascha@330: Change KEY-Attribute of KeyValueDescribeData from Integer to String for the required sascha@330: Representation of Date-KeyValue-Pairs sascha@121: * src/main/java/de/intevation/gnv/profile/vertical/VerticalProfileArtifact.java Added: sascha@330: ArtifactClass for the representation of VerticalProfiles sascha@121: * src/main/java/de/intevation/gnv/artifacts/fis/FISArtifact.java (createSelectBox) Edited: sascha@330: Added support for selected Products in static UI. sascha@121: * src/main/java/de/intevation/gnv/chart/VerticalProfileChartFactory.java Added: sascha@330: Factory for producing VerticalCharts added. sascha@121: * src/main/java/de/intevation/gnv/chart/ChartFactory.java Edited: sascha@330: Names of Getter for Columns Changed. sascha@121: sascha@121: 2009-09-21 Tim Englich sascha@121: sascha@121: * src/test/ressources/queries.properties Edited: sascha@330: Queryie for TimeSeriesMesh added. sascha@330: * src/test/ressources/conf.xml Edited: sascha@121: New Artifact representing the TimeSeries-Mesh added to the Configuration. sascha@121: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java Edited: sascha@330: Inputdata for the Chartgeneration will now be allocated by name and not by position in Transitionorder. sascha@330: * src/main/java/de/intevation/gnv/transition/describedata/SingleValueDescribeData.java Added, sascha@330: src/main/java/de/intevation/gnv/transition/describedata/DefaultSingleValueDescribeData.java Added, sascha@121: src/main/java/de/intevation/gnv/transition/SingleInputTransition.java Added: sascha@330: New Class for Representing a single Input Transition sascha@121: * src/main/java/de/intevation/gnv/transition/TransitionBase.java Edited: sascha@121: Added support of usage inputValues none or multiple times in Queries. sascha@121: Added support for SingleInputTransitions in Describe-Output sascha@330: * src/main/java/de/intevation/gnv/transition/InputValue.java Edited, sascha@121: src/main/java/de/intevation/gnv/transition/DefaultInputValue.java Edited: sascha@330: An InputValue now is possible to use none or multiple times in Queries. sascha@121: * src/main/java/de/intevation/gnv/timeseries/TimeSeriesMeshArtifact.java Added: sascha@330: ArtifactClass for the Representation of an Mesh-Timeseries-Artifact sascha@121: sascha@121: 2009-09-17 Tim Englich sascha@121: sascha@330: * src/test/ressources/conf.xml Edited: sascha@121: Database Cleanup Interval set to 5 minutes. sascha@330: sascha@121: 2009-09-17 Tim Englich sascha@330: * src/test/ressources/conf.xml Edited: sascha@121: Some structurechanges done. sascha@330: sascha@121: * src/main/java/de/intevation/gnv/utils/ArtifactXMLUtilities.java Edited: sascha@330: Fixed Bug supporting UTF-8 Documents properly. sascha@330: * src/main/java/de/intevation/gnv/transition/describedata/DefaultKeyValueDescribeData.java Edited, sascha@121: * src/main/java/de/intevation/gnv/transition/describedata/KeyValueDescibeData.java Edited, sascha@330: Added Methods for setting and getting the selection-state of this objects. sascha@330: sascha@330: * src/main/java/de/intevation/gnv/transition/describedata/DefaultMinMaxDescribeData.java Edited, sascha@121: src/main/java/de/intevation/gnv/transition/describedata/MinMaxDescribeData.java Edited: sascha@121: Added setter for min an max-Values and getters an setters for minName and maxName sascha@330: sascha@330: * src/main/java/de/intevation/gnv/transition/describedata/NamedCollection.java Added, sascha@121: src/main/java/de/intevation/gnv/transition/describedata/NamedArrayList.java Added: sascha@330: Collection ans an Implementation of this Collection for Storing Name of the Collection and if sascha@121: the Values in it are multiselectable. sascha@330: sascha@121: * src/main/java/de/intevation/gnv/transition/TransitionBase.java : sascha@121: Static UI-Support and valid SelectionStorage added. sascha@330: I added also an imporvement of the multiselect Methods for Datasets sascha@121: * src/main/java/de/intevation/gnv/transition/MinMaxTransition.java Edited: sascha@121: Storage of changed Values added sascha@330: sascha@121: * src/main/java/de/intevation/gnv/artifacts/fis/FISArtifact.java Edited: sascha@121: Static UI Support Added sascha@330: sascha@330: sascha@121: 2009-09-16 Tim Englich sascha@121: sascha@121: * src/test/ressources/conf.xml Edited, sascha@121: src/main/java/de/intevation/gnv/transition/TransitionBase.java (describe) Edited, sascha@121: src/main/java/de/intevation/gnv/transition/InputValue.java (isMultiselect) Edited, sascha@121: src/main/java/de/intevation/gnv/transition/InputData.java (concartValue) Edited, sascha@330: src/main/java/de/intevation/gnv/transition/DefaultInputValue.java (isMultiselect) Edited, sascha@330: src/main/java/de/intevation/gnv/transition/DefaultInputData.java (concartValue)Edited, sascha@121: src/main/java/de/intevation/gnv/artifacts/fis/FISArtifact.java (createUserInterface) Edited, sascha@121: src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java (parseInputData) Edited: sascha@121: Added Multiselectsupport for InputValues sascha@330: sascha@121: 2009-09-16 Tim Englich sascha@121: sascha@121: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java (setup) Edited: sascha@121: Bug Fixed because of Infrastructure Changes in the Artifact-Module sascha@330: sascha@121: * src/main/java/de/intevation/gnv/transition/TransitionBase.java Edited: sascha@121: Put only the last DescribeData to the UI-Output bnecause auf Renderingproblems in the Client sascha@330: sascha@330: * src/main/java/de/intevation/gnv/transition/describedata/DefaultKeyValueDescribeData.java Edited, sascha@330: src/main/java/de/intevation/gnv/transition/describedata/DefaultMinMaxDescribeData.java Edited, sascha@121: src/main/java/de/intevation/gnv/transition/describedata/KeyValueDescibeData.java Edited: sascha@330: Made Interface Serializable, add UIDs to the Implementations of the Interface sascha@330: sascha@121: 2009-09-15 Tim Englich sascha@121: sascha@121: * src/main/java/de/intevation/gnv/artifacts/fis/FISArtifact.java (createUserInterface) Edited: sascha@330: Integrate UI-Representation for Describe into the FISArtifact. sascha@121: * src/main/java/de/intevation/gnv/utils/ArtifactXMLUtilities.java (createXFormElement) Refactoring, sascha@330: src/main/java/de/intevation/gnv/transition/TransitionBase.java (describe) Refactoring: sascha@121: Extract the Element-Creation of XForms Nodes into a Common Class to make them available for sascha@330: other Classes which have to create XForm-Fragments sascha@330: sascha@121: 2009-09-14 Tim Englich sascha@121: sascha@330: * src/main/java/de/intevation/gnv/transition/Transition.java Edited, sascha@330: src/main/java/de/intevation/gnv/transition/InputData.java Edited, sascha@330: src/main/java/de/intevation/gnv/transition/OutputMode.java Edited, sascha@330: src/main/java/de/intevation/gnv/transition/InputValue.java Edited, sascha@121: src/main/java/de/intevation/gnv/artifacts/fis/product/Product.java Edited, sascha@330: src/main/java/de/intevation/gnv/utils/ArtifactXMLUtilities.java Edited, sascha@330: src/main/java/de/intevation/gnv/transition/describedata/DescribeData.java Edited: sascha@121: Make the Interfaces Serializable to make them usable in the Artifactdatabase sascha@330: sascha@121: 2009-09-14 Tim Englich sascha@121: sascha@330: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java Edited, sascha@330: src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java Edited, sascha@330: src/main/java/de/intevation/gnv/transition/OutputTransition.java Edited , sascha@121: src/main/java/de/intevation/gnv/timeseries/TimeSeriesArtifact.java Edited, sascha@330: src/main/java/de/intevation/gnv/artifacts/fis/FISArtifact.java Edited, sascha@121: src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java Edited: sascha@330: Refactoring Work depending on Infrastructurchanges in the Artifact-Module sascha@330: sascha@121: 2009-09-10 Tim Englich sascha@121: sascha@330: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java Edited, sascha@330: src/test/ressources/timeseries/timeseries_step_01_feed.xml Edited, sascha@330: src/test/ressources/timeseries/timeseries_step_01_advance.xml Edited, sascha@121: src/test/ressources/conf.xml Edited: sascha@330: TestCase moced from TimeSeriesArtifact to FISArtifact. Used FIS: Marnet sascha@330: sascha@121: 2009-09-10 Tim Englich sascha@121: sascha@121: * src/main/java/de/intevation/gnv/utils/ArtifactXMLUtilities.java Added: sascha@330: Utilities-Class for some XML-Stuff that is only for gnv-artifacts sascha@330: sascha@121: * src/main/java/de/intevation/gnv/utils/ArtifactFactoryUtilities.java Added: sascha@330: Factory to Instantiiate an ArtifactFactory (TODO: Should be moved to Artifact-database) sascha@330: sascha@330: * src/main/java/de/intevation/gnv/artifacts/fis/product/Product.java Added, sascha@121: src/main/java/de/intevation/gnv/artifacts/fis/product/DefaultProduct.java Added: sascha@121: Interfcaedefinition and Defaultimplementation for the Representation of the different sascha@121: Products in an FIS. sascha@330: sascha@121: * src/main/java/de/intevation/gnv/artifacts/fis/FISArtifact.java Added: sascha@330: Artifact to Repersent an FIS. This Artifact is able to switch between different sascha@330: SubArtifacts for handling the different Products of an FIS. sascha@330: sascha@121: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java Edited: sascha@330: Refactoring Work done because of changes in the artifact-modules sascha@330: sascha@121: 2009-09-10 Tim Englich sascha@121: sascha@330: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java Edited, sascha@121: src/main/java/de/intevation/gnv/timeseries/TimeSeriesArtifact.java Edited: sascha@121: Refactoringwork done because of changes in the artifact-module sascha@330: sascha@121: 2009-09-10 Tim Englich sascha@121: sascha@121: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java Edited: sascha@330: src/test/ressources/conf.xml Renamed: sascha@121: Project Structure changed in artifact-database. So we have to rename sascha@330: the Testconfigurationfile in conf.xml. sascha@121: sascha@121: * src/test/ressources/results Added: sascha@121: Integrated Folder for temporal storing Resultfiles of the TestCases sascha@330: sascha@121: * src/test/ressources/queries.properties Edited: sascha@121: Further Queries for Testcases integrated sascha@330: * src/test/ressources/timeseries/timeseries_step_05_out.xml Added, sascha@121: src/test/ressources/timeseries/timeseries_step_05_feed.xml Added: sascha@121: Integrated the last step of the TimeSeries-Workflow. sascha@121: Now the TestCase is able to render Charts. sascha@330: sascha@330: * src/test/ressources/timeseries/timeseries_step_04_feed.xml Edited, sascha@121: src/test/ressources/timeseries/timeseries_step_03_feed.xml Edited: sascha@121: Names of the feed-Parametes changed to the Syntax of BSH-Spelling sascha@330: sascha@121: 2009-09-09 Tim Englich sascha@121: sascha@330: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java: sascha@121: Chart Rendering completed with some Fixes to do sascha@330: * src/main/java/de/intevation/gnv/transition/TransitionBase.java: sascha@121: Integrated usage of KeyValueDescibeData sascha@330: * src/main/java/de/intevation/gnv/transition/OutputTransition.java (getOutputModes): sascha@121: Errorhandling integrated sascha@330: * src/main/java/de/intevation/gnv/timeseries/TimeSeriesArtifact.java Edited, sascha@121: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java Edited: sascha@121: Refactored out-Method from Extending Class sascha@330: sascha@121: 2009-09-09 Tim Englich sascha@121: sascha@330: * src/main/java/de/intevation/gnv/chart/exception/TechnicalChartException.java Added, sascha@121: src/main/java/de/intevation/gnv/chart/ChartFactory.java Edited: sascha@330: Refactoring of the ChartFactory so that it colud be use and it is possible to compile sascha@121: this class. sascha@330: sascha@330: * src/main/java/de/intevation/gnv/transition/describedata/KeyValueDescibeData.java Added, sascha@121: src/main/java/de/intevation/gnv/transition/describedata/DefaultKeyValueDescribeData.java Added: sascha@121: Added an new Representation of Describedata for Key Value Pairs using for the Parameter Lists sascha@330: of the Transitions an put it into the Chartgeneration sascha@330: sascha@121: 2009-09-09 Tim Englich sascha@121: sascha@121: * pom.xml Edited: sascha@121: Added JfreeChart Dependency to pom-file sascha@330: sascha@121: 2009-09-09 Tim Englich sascha@121: sascha@330: * src/main/java/de/intevation/gnv/chart/Insets.java Added, sascha@330: src/main/java/de/intevation/gnv/chart/ChartStyle.java Added, sascha@330: src/main/java/de/intevation/gnv/chart/ChartLabels.java Added, sascha@121: src/main/java/de/intevation/gnv/chart/ChartFactory.java Added: sascha@121: Insert Chart-Classes from OLD-Repository Revision: 3101 Does not compile sascha@121: sascha@121: 2009-09-09 Tim Englich sascha@121: sascha@121: * src/main/java/de/intevation/gnv/transition/timeseries/TimeSeriesOutputTransition.java Added: sascha@330: The specifed OutputTransition for the Product TimeSeries. sascha@330: sascha@121: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java Edited: sascha@121: Integration of the OutputModes in the DescriberesultDocument. sascha@330: sascha@121: * src/main/java/de/intevation/gnv/transition/OutputTransitionBase.java Added, sascha@121: src/main/java/de/intevation/gnv/transition/OutputTransition.java Added: sascha@330: The Interface and the abstract Basicimplementation of an Transition which sascha@121: can produce different outputs. sascha@121: sascha@330: * src/main/java/de/intevation/gnv/transition/DefaultOutputMode.java Added, sascha@121: src/main/java/de/intevation/gnv/transition/OutputMode.java Added: sascha@121: Interfacestructur and Defaultimplementation for the Representation of the sascha@121: Different OutputModes given in an Artifact. sascha@330: sascha@121: 2009-09-09 Tim Englich sascha@121: sascha@121: * src/main/java/de/intevation/gnv/transition/TransitionBase.java (describe) Edited: sascha@330: Changed DateoutputFormat from German- to Anericanstyle sascha@330: sascha@121: 2009-09-09 Tim Englich sascha@121: sascha@330: * src/test/ressources/timeseries/timeseries_step_04_feed.xml Added, sascha@121: * src/test/ressources/timeseries/timeseries_step_04_advance.xml Added: sascha@330: Two more ArtifactCommands for the next Step in TimeSeriesArtifactTestCase sascha@121: * src/test/ressources/queries.properties Edited: sascha@121: New Queries for timeseries_timeinterval added. sascha@330: Also use KEY ,VALUE, MIN and MAX as Identifiers for the different Columns. sascha@330: * src/test/ressources/GNVArtifactsTestCase_Configuration.xml Edited, sascha@121: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java Edited: sascha@330: Modified the TimeseriesArtifact and added one further TransitionStep sascha@121: sascha@121: 2009-09-09 Tim Englich sascha@121: sascha@330: * src/main/java/de/intevation/gnv/transition/describedata/DefaultMinMaxDescribeData.java , sascha@121: * src/main/java/de/intevation/gnv/transition/describedata/MinMaxDescribeData.java, sascha@121: * src/main/java/de/intevation/gnv/transition/describedata/DescribeData.java Added: sascha@121: Interface Structure and Defaultimplementation for Representing DescribeData of an sascha@121: Transition added. In this Way we are able to switch between different Renderingmethods sascha@330: for descibe. sascha@121: * src/main/java/de/intevation/gnv/transition/MinMaxTransition.java Added: sascha@330: Added MinMaxTransition for representing Min-/Max-Value Results in a Tansition sascha@121: * src/main/java/de/intevation/gnv/transition/TransitionBase.java Edited: sascha@330: Integrated Min- / MAX-Value Support for Describe. Also done some Refactoring Work sascha@330: for easy creating Extensions of this Class. sascha@121: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java Edited: sascha@121: Userinterface Informations were integrated in the wrong Method. Now the sascha@330: Informations are put into the ui-Node sascha@121: sascha@121: 2009-09-08 Tim Englich sascha@121: sascha@330: * src/test/ressources/timeseries/timeseries_step_01_advance.xml Edited, sascha@330: src/test/ressources/timeseries/timeseries_step_01_feed.xml Edited, sascha@330: src/test/ressources/timeseries/timeseries_step_02_advance.xml Added, sascha@330: src/test/ressources/timeseries/timeseries_step_02_feed.xml Added, sascha@330: src/test/ressources/timeseries/timeseries_step_03_advance.xml Added, sascha@330: src/test/ressources/timeseries/timeseries_step_03_feed.xml Added, sascha@121: src/test/ressources/GNVArtifactsTestCase_Configuration.xml: Edited, sascha@330: src/test/ressources/queries.properties Added, sascha@330: src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java Edited: sascha@121: TestCase implemented until Choosing the TimeInetval of an TimeSeries sascha@330: sascha@121: One Entry is Missing sascha@330: sascha@121: 2009-09-08 Tim Englich sascha@121: sascha@330: * src/main/java/de/intevation/gnv/transition/TransitionBase.java Edited, sascha@330: src/main/java/de/intevation/gnv/transition/Transition.java Edited, sascha@121: src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java Edited, sascha@121: src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java Edited, sascha@121: src/test/ressources/GNVArtifactsTestCase_Configuration.xml Edited, sascha@330: src/test/ressources/timeseries/timeseries_step_01_feed.xml Added , sascha@121: src/test/ressources/timeseries/timeseries_step_01_advance.xml Added : sascha@121: Artifact.advance initial implementiert sascha@330: sascha@121: 2009-09-08 Tim Englich sascha@121: sascha@121: * src/main/java/de/intevation/gnv/timeseries/TimeSeriesArtifact.java Edited, sascha@121: src/main/java/de/intevation/gnv/transition/DefaultInputData.java Added, sascha@121: src/main/java/de/intevation/gnv/transition/InputData.java Added, sascha@121: src/main/java/de/intevation/gnv/transition/exception/TransitionException.java Added, sascha@330: src/main/java/de/intevation/gnv/transition/TransitionBase.java Edited, sascha@330: src/main/java/de/intevation/gnv/transition/Transition.java Edited, sascha@121: src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java Edited: sascha@330: Funktionalitat Feed initial bereitgestellt. sascha@330: sascha@121: 2009-09-08 Tim Englich sascha@121: sascha@121: * src/test/ressources/GNVArtifactsTestCase_Configuration.xml, sascha@330: src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java, sascha@330: src/main/java/de/intevation/gnv/transition/TransitionBase.java, sascha@121: src/main/java/de/intevation/gnv/transition/DefaultInputValue.java Edited: sascha@121: Required Inputelements integrated in BasicArtifact-Descibe-Output sascha@330: sascha@121: 2009-09-08 Tim Englich sascha@121: sascha@330: * src/main/java/de/intevation/gnv/transition/DefaultInputValue.java Added, sascha@121: src/main/java/de/intevation/gnv/transition/InputValue.java Added, sascha@330: src/main/java/de/intevation/gnv/transition/TransitionBase.java Edited, sascha@330: src/main/java/de/intevation/gnv/transition/Transition.java Edited, sascha@121: src/test/ressources/GNVArtifactsTestCase_Configuration.xml Edited: sascha@330: Constructs for the required Inputvalues for an Transition created sascha@330: sascha@121: 2009-09-08 Tim Englich sascha@121: sascha@330: * src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java, sascha@121: * src/main/java/de/intevation/gnv/timeseries/TimeSeriesArtifact.java:, sascha@121: * src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java: Edited sascha@121: Added Output for Describe to the Artifactimplementation sascha@330: sascha@121: 2009-09-08 Tim Englich sascha@121: sascha@330: * src/test/ressources/GNVArtifactsTestCase_Configuration.xml, sascha@330: src/main/java/de/intevation/gnv/transition/Transition.java (getDescription), sascha@330: src/main/java/de/intevation/gnv/transition/TransitionBase.java (setup), (getDescription): sascha@121: Added Description to a Transition sascha@330: sascha@121: 2009-09-07 Tim Englich sascha@121: sascha@330: * src/test/ressources/GNVArtifactsTestCase_Configuration.xml, sascha@330: src/test/java/de/intevation/gnv/artifacts/GNVArtifactsTestCase.java: ADD sascha@121: TestClass for GNV-Artifacts an TimeSeriesArtifacs sascha@330: sascha@121: * src/main/java/de/intevation/gnv/transition/TransitionFactory.java, sascha@330: src/main/java/de/intevation/gnv/transition/TransitionBase.java, sascha@330: src/main/java/de/intevation/gnv/transition/Transition.java, sascha@121: src/main/java/de/intevation/gnv/transition/DefaultTransition.java: ADD sascha@121: Transitionimplementation for handling the substeps of an Artifact Livecycle sascha@330: sascha@121: * src/main/java/de/intevation/gnv/timeseries/TimeSeriesArtifact.java: ADD sascha@121: The Artifact for handling the TimeSeries sascha@121: * src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContextFactory.java, sascha@121: src/main/java/de/intevation/gnv/artifacts/context/GNVArtifactContext.java, sascha@121: src/main/java/de/intevation/gnv/artifacts/GNVArtifactBase.java: sascha@121: The Basic-Classes for providing GNC Artifacts. this Classes should be the Fundament sascha@121: for the Implementation of Specialized Artifacts e.g. TimeSeries sascha@121: * pom: Edited Projectreferences to the other GNV-Projects added sascha@330: sascha@121: 2009-09-04 Tim Englich sascha@121: sascha@330: * src/main/java/de/intevation/gnv/artifacts/ArtifactFactoryBase.java: sascha@330: Implementation of the General ArtifactFactory sascha@330: sascha@121: 2009-09-04 Tim Englich sascha@121: sascha@121: * pom.xml: Created with maven and put the Moduledependencies into it sascha@121: * target | .settings | .project | .classpath: Add to SVN-Ignore sascha@121: * Changes | Changelog | NEWS | README | TODO: Added sascha@121: * src/**: Added to the Project