hans@903: 2. Verticalprofile: 
hans@903: 
hans@903: 2.1 Verticalprofile@MARNET (ArcMarineBSH TimeSeriesPoint)
hans@903: 
hans@903: # General Data Range
hans@903: Sample:
hans@903: MARNET 
hans@903: FINO1 
hans@903: Salzgehalt
hans@903: # for gap detection
hans@903: ??? - c.f. specification
hans@903: # Just one arbitrary point of time
hans@903: 2007.01.21 12:15:00
hans@903: 
hans@903: a. fill parameterization
hans@903: # ~ Range of Depth
hans@903: # Aim: Check for drawing of curve
hans@903: # Aim: General check for all elements
hans@903: 
hans@903: # General Case
hans@903: Depth: End-Start= Max
hans@903: 
hans@903: # Clipping one Point of Measurement
hans@903: Depth: End-Start= Max-1
hans@903: 
hans@903: # None Range
hans@903: Depth: End=Start
hans@903: 
hans@903: # Out of Range
hans@903: Depth: End-Start<0
hans@903: 
hans@903: b. draw diagram
hans@903: # Reactions: Elements to check
hans@903: # General (static)
hans@903: titel
hans@903:     - content
hans@903: y-axis
hans@903:     - rang
hans@903:     - labeling
hans@903:     - units
hans@903: x-axis
hans@903:     - range
hans@903:     - labeling
hans@903:     - units
hans@903: helperlines
hans@903:     - direction
hans@903: curves
hans@903:     - colors
hans@903:     - with points
hans@903: legend
hans@903:     - entries
hans@903:     - labeling
hans@903: 
hans@903: # Dynamic part
hans@903: titel
hans@903:     - content 
hans@903: y-axis
hans@903:     - rang
hans@903:     - labeling
hans@903:     - units
hans@903: x-axis
hans@903:     - range
hans@903:     - labeling
hans@903:     - units
hans@903: legend
hans@903:     - entries
hans@903:     - labeling
hans@903: 
hans@903: c. save as project
hans@903: e. reload project
hans@903: f. change diagram options
hans@903: g. export diagram as file (PNG, PDF, SVG)
hans@903: h. calculate statistics
hans@903: i. draw histogram
hans@903: j. change histogram options
hans@903: k. export as raw data (CSV, ODV)
hans@903: 
hans@903: 
hans@903: a. fill parameterization
hans@903: # ~Depth
hans@903: # Aim: Check for labeling of legend
hans@903: # Aim: Check for different curves with same axis
hans@903: Time: 1 Month
hans@903:     2006.12.21 12:15:00
hans@903:     2007.01.21 12:15:00
hans@903: 
hans@903: Number of Depth: 1
hans@903: 
hans@903: Number of Depth: 2
hans@903: 
hans@903: (Number of Depth: 3)
hans@903: 
hans@903: b. draw diagram
hans@903: # Reactions: Elements to check
hans@903: # Dynamic part
hans@903: y-axis
hans@903:     - rang
hans@903:     - labeling
hans@903:     - units
hans@903: curves
hans@903:     - colors
hans@903:     - with points
hans@903: legend
hans@903:     - entries
hans@903:     - labeling
hans@903: 
hans@903: 
hans@903: 
hans@903: 2.2 Verticalprofile@Modeldata (ArcMarineBSH MeshFeatures)
hans@903: 
hans@903: # General Data Range
hans@903: Sample:
hans@903: Modeldata
hans@903: 56n30 6e20
hans@903: 56°N 33,000' 06°O 15,000'
hans@903: 
hans@903: # for gap detection
hans@903: ??? - specified?
hans@903: # Just one arbitrary point of time
hans@903: 2010.03.13 12:00:00
hans@903: 
hans@903: a. fill parameterization
hans@903: # ~ Range of Depth
hans@903: # Aim: Check for drawing of curve
hans@903: # Aim: General check for all elements
hans@903: 
hans@903: # Further need for this cases? Difference between TimeSeriesPoint 
hans@903: and Modeldata?
hans@903: # General Case
hans@903: Depth: End-Start= Max
hans@903: 
hans@903: # Clipping one Point of Measurement
hans@903: Depth: End-Start= Max-1
hans@903: 
hans@903: # None Range
hans@903: Depth: End=Start
hans@903: 
hans@903: # Out of Range
hans@903: Depth: End-Start<0
hans@903: 
hans@903: b. draw diagram
hans@903: # Reactions: Elements to check
hans@903: # General (static)
hans@903: titel
hans@903:     - content
hans@903: y-axis
hans@903:     - rang
hans@903:     - labeling
hans@903:     - units
hans@903: x-axis
hans@903:     - range
hans@903:     - labeling
hans@903:     - units
hans@903: helperlines
hans@903:     - number of directions (1|2)
hans@903: curves
hans@903:     - colors
hans@903:     - with points
hans@903: legend
hans@903:     - entries
hans@903:     - labeling
hans@903: 
hans@903: # Dynamic part
hans@903: titel
hans@903:     - content 
hans@903: y-axis
hans@903:     - rang
hans@903:     - labeling
hans@903:     - units
hans@903: x-axis
hans@903:     - range
hans@903:     - labeling
hans@903:     - units
hans@903: legend
hans@903:     - entries
hans@903:     - labeling
hans@903: 
hans@903: 
hans@903: h. calculate statistics
hans@903: i. draw histogram
hans@903: k. export as raw data (CSV, ODV, Shapefile)
hans@903: 
hans@903: 
hans@903: 2.3 Verticalprofile@CTD (ArcMarineBSH Measurements)
hans@903: 
hans@903: 
hans@903: # General Data Range
hans@903: Sample:
hans@903: CTD
hans@903: Area: No Selection
hans@903: Series: FS Alkor 292
hans@903: 23.01.2007 10:17 - 54°N 1,960' 08°O 12,550'
hans@903: 
hans@903: 
hans@903: # for gap detection
hans@903: ??? - specified?
hans@903: # Just one arbitrary point of time
hans@903: 23.01.2007 10:17
hans@903: 
hans@903: a. fill parameterization
hans@903: # ~ Range of Depth
hans@903: # Aim: Check for drawing of curve
hans@903: # Aim: General check for all elements
hans@903: 
hans@903: # General Case
hans@903: Depth: End-Start= Max
hans@903: 
hans@903: b. draw diagram
hans@903: # Reactions: Elements to check
hans@903: # General (static)
hans@903: titel
hans@903:     - content
hans@903: helperlines
hans@903:     - number of directions (1|2)
hans@903: curves
hans@903:     - colors
hans@903:     - with points
hans@903: legend
hans@903:     - entries
hans@903:     - labeling
hans@903: 
hans@903: # Dynamic part
hans@903: titel
hans@903:     - content 
hans@903: y-axis
hans@903:     - rang
hans@903:     - labeling
hans@903:     - units
hans@903: x-axis
hans@903:     - range
hans@903:     - labeling
hans@903:     - units
hans@903: legend
hans@903:     - entries
hans@903:     - labeling
hans@903: 
hans@903: 
hans@903: h. calculate statistics
hans@903: i. draw histogram
hans@903: k. export as raw data (CSV, ODV, Shapefile)