| Thu, 11 Feb 2010 08:54:58 +0000 |
Ingo Weinzierl |
Improved hash creation in each state.
|
| Wed, 10 Feb 2010 15:35:26 +0000 |
Ingo Weinzierl |
Added descriptions to the selected input data and use them for rendering the GUI.
|
| Wed, 10 Feb 2010 11:43:35 +0000 |
Ingo Weinzierl |
Parted the cache blob into pieces and changed the way how user input is stored on each state.
|
| Tue, 09 Feb 2010 15:23:07 +0000 |
Tim Englich |
Added the support of the usecase that one FIS can be identified by different MapServices. In that case the parameters will be merged into the existing FIS.
|
| Tue, 09 Feb 2010 14:27:55 +0000 |
Ingo Weinzierl |
First step of removing the cache blob. The static part of the describe document will be created by using the input data stored at each state. Some TODOs left (see ChangeLog).
|
| Tue, 09 Feb 2010 13:01:20 +0000 |
Tim Englich |
Integrated Database-Support for the Mapviewer-Interface
|
| Fri, 05 Feb 2010 14:15:09 +0000 |
Ingo Weinzierl |
Changed log4j version to 1.2.14
|
| Fri, 05 Feb 2010 12:00:04 +0000 |
Tim Englich |
Changed from ArcSDE Version 9.2.5 to Version 9.3
|
| Fri, 05 Feb 2010 10:36:46 +0000 |
Tim Englich |
Changes id_layer of Table layerhasparameter from literal to number.
|
| Fri, 05 Feb 2010 09:58:50 +0000 |
Tim Englich |
ISSUE167
|
| Tue, 02 Feb 2010 13:13:45 +0000 |
Tim Englich |
Added the usage of the Presettings in the States which are handling the choice of Parameter
|
| Tue, 02 Feb 2010 13:12:11 +0000 |
Tim Englich |
Added the possibility to use the data which are send using the MapServer-Interface during the Workflow of the GNV-Artifacts.
|
| Mon, 01 Feb 2010 14:52:05 +0000 |
Tim Englich |
Added the Implementation of the MetaDataService which will deliver FIS and Parameters that match to Mapservices, Region and Layers that were sent to the Service.
|
| Mon, 01 Feb 2010 14:20:11 +0000 |
Tim Englich |
Remove some Structure-Errors from the ChangeLog
|
| Mon, 01 Feb 2010 14:14:19 +0000 |
Tim Englich |
Compilance-Errors triggered by Interface-Modifications in the Artifact-Module.
|
| Mon, 01 Feb 2010 14:03:01 +0000 |
Tim Englich |
Changed Method signatures because of Interfacemodifications in the Artifact-Module
|
| Sun, 31 Jan 2010 21:50:15 +0000 |
Sascha L. Teichmann |
Added experimental support for extrapolation in "Horizontalschnitte"
|
| Fri, 29 Jan 2010 13:28:28 +0000 |
Tim Englich |
Removed accidental checkin of Test-Shapefiles
|
| Fri, 29 Jan 2010 13:19:34 +0000 |
Tim Englich |
Fixed the broken JUnittests.
|
| Mon, 08 Mar 2010 17:09:28 +0000 |
Ingo Weinzierl |
Repaired error message parsing from resulting xml documents after feed() has been called.
|
| Mon, 08 Mar 2010 07:07:44 +0000 |
Ingo Weinzierl |
img-Exports will get a file extension that corresponds to their mime-type (issue187).
|
| Sat, 06 Mar 2010 08:08:16 +0000 |
Sascha L. Teichmann |
Removed duplicated imports.
|
| Fri, 05 Mar 2010 15:50:10 +0000 |
Ingo Weinzierl |
Reset diagram options after switching from chart to histogram or the other way around (issue190).
|
| Fri, 05 Mar 2010 09:58:57 +0000 |
Tim Englich |
ISSUE 181: Removed duplicate Drawaing of the Lengendvalue of Groupelements for choosing different heights for several Parameters
|
| Fri, 05 Mar 2010 09:33:30 +0000 |
Ingo Weinzierl |
Show information about MapServer path and layer name after publishing calculated shapefiles as wms. Use MapServer settings configured in conf.xml to feed OpenLayers client.
|
| Thu, 04 Mar 2010 14:27:26 +0000 |
Ingo Weinzierl |
Adjusted rendering of OpenLayers client.
|
| Tue, 02 Mar 2010 14:55:29 +0000 |
Ingo Weinzierl |
Adjusted http requests and appended a new parameter export mode to 'out'-xml document to choose between svg, pdf or image exports.
|
| Tue, 02 Mar 2010 10:53:30 +0000 |
Ingo Weinzierl |
Implemented a One-Step-Back-History.
|
| Tue, 02 Mar 2010 09:02:31 +0000 |
Ingo Weinzierl |
Display chart when reaching a final state which doesn't need any further user input (issue184).
|
| Mon, 01 Mar 2010 15:52:24 +0000 |
Ingo Weinzierl |
Display an exception if an error occured while stepping back to a former state (issue183).
|
| Mon, 01 Mar 2010 11:08:07 +0000 |
Ingo Weinzierl |
Removed litte copy-paste mistake while setting file-extension for exports.
|
| Mon, 01 Mar 2010 11:05:09 +0000 |
Ingo Weinzierl |
Set file-extension for histogram exports according to mime-type.
|
| Fri, 26 Feb 2010 13:54:47 +0000 |
Ingo Weinzierl |
Render a matrix for measurement selection (measurement-parameter).
|
| Thu, 25 Feb 2010 08:18:41 +0000 |
Ingo Weinzierl |
Fixed issue 178. Export modes CSV and ODV work again.
|
| Wed, 24 Feb 2010 14:38:36 +0000 |
Ingo Weinzierl |
Added checkboxes for selecting the field which is used to adjust the number of bins in histogram charts.
|
| Wed, 24 Feb 2010 08:35:26 +0000 |
Ingo Weinzierl |
Add histogram option parameter to http request for fetching histogram image.
|
| Tue, 23 Feb 2010 17:43:16 +0000 |
Ingo Weinzierl |
Devided actions and exports. Adjusted output and export actions.
|
| Tue, 23 Feb 2010 15:26:50 +0000 |
Ingo Weinzierl |
Sourced JavaScript script tags for loading and rendering an OpenLayers client out to an own jsp page.
|
| Tue, 23 Feb 2010 10:36:02 +0000 |
Ingo Weinzierl |
Added histogram option panel. Show chart/histogram options panel after the user selected chart or histogram. Moved options panel beneath action panel.
|
| Mon, 22 Feb 2010 18:04:55 +0000 |
Ingo Weinzierl |
Render an OpenLayers map with the layer even published after triggering shapefile and mapfile creation.
|
| Mon, 15 Feb 2010 11:42:29 +0000 |
Ingo Weinzierl |
Added action and jsp for rendering histograms.
|
| Fri, 12 Feb 2010 11:16:33 +0000 |
Ingo Weinzierl |
Repaired step-back history.
|
| Fri, 12 Feb 2010 09:58:24 +0000 |
Tim Englich |
Added further XML-Nodes for simulating the MapViewer-Call more detailed.
|
| Fri, 12 Feb 2010 09:55:59 +0000 |
Tim Englich |
Modified the GUI that the Form with the MapViewer-Interface-Request-Body only will be shown using an explicit Action-Call.
|
| Fri, 12 Feb 2010 09:29:54 +0000 |
Tim Englich |
Modified the Create-Artifact-Request-Body that a Geometry will be put into
|
| Tue, 09 Feb 2010 13:16:19 +0000 |
Tim Englich |
Added Sampledata and a sample how to call the MapViewer-Interface using CURL.
|
| Tue, 09 Feb 2010 13:13:41 +0000 |
Tim Englich |
Integrated an Textarea so that is possible to manipulate the XML-Document
|
| Tue, 09 Feb 2010 13:09:45 +0000 |
Tim Englich |
Removed trailing and leading Whitespaces from the Parametervalue which
|
| Tue, 09 Feb 2010 13:05:49 +0000 |
Tim Englich |
Fixed a NPE. Now it is possible to put an Mapservice without an Layer into
|
| Fri, 05 Feb 2010 14:16:03 +0000 |
Ingo Weinzierl |
Changed log4j version to 1.2.14
|
| Tue, 02 Feb 2010 08:22:20 +0000 |
Tim Englich |
Added temporally Possibility to send an MapViewer-Interface-Request using the GUI of the GNV
|
| Mon, 01 Feb 2010 15:08:39 +0000 |
Tim Englich |
Added further business logic for the MapViewer-Interface
|
| Fri, 28 Sep 2012 12:13:50 +0200 |
Thomas Arendsen Hein |
merged geo-backend/0.4
0.4
|
| Wed, 27 Jan 2010 14:50:07 +0000 |
Hans Plum |
Summarized Changes and NEWS for Release 0.4
|
| Tue, 26 Jan 2010 16:33:36 +0000 |
Sascha L. Teichmann |
Fixed gnv/issue107
|
| Tue, 26 Jan 2010 13:55:55 +0000 |
Tim Englich |
Added two Sample-Application demonstrating Bugs in the ArcSDE
|
| Mon, 25 Jan 2010 12:12:31 +0000 |
Sascha L. Teichmann |
Another attempt to fix gnv/issue34. Implemented an internal idle time checking.
|
| Fri, 15 Jan 2010 20:57:13 +0000 |
Sascha L. Teichmann |
Cleanup imports
|
| Fri, 15 Jan 2010 10:09:41 +0000 |
Tim Englich |
Improved the Objectvalidation of the ArcSDE-Databaseconnections
|
| Tue, 12 Jan 2010 00:27:53 +0000 |
Sascha L. Teichmann |
Added bicubic spline interpolation on raster tiles.
|
| Sat, 09 Jan 2010 16:40:19 +0000 |
Sascha L. Teichmann |
Added method to figure out interpolation method for a given string in raster tiles.
|
| Sat, 09 Jan 2010 16:12:10 +0000 |
Sascha L. Teichmann |
Implemented bilinear interpolation on raster tiles.
|
| Sat, 09 Jan 2010 12:41:26 +0000 |
Sascha L. Teichmann |
Fixed access to raster data.
|
| Fri, 08 Jan 2010 14:40:08 +0000 |
Tim Englich |
Removed Encodingerrors from listed Files. All Files are now UTF-8 compliant.
|
| Tue, 05 Jan 2010 15:08:01 +0000 |
Sascha L. Teichmann |
Made RasterObject serializable to be cachable beyond reboot.
|
| Tue, 05 Jan 2010 14:09:53 +0000 |
Tim Englich |
Added RasterObject for caching the Rastertiles to get a better performance
|
| Mon, 04 Jan 2010 15:22:09 +0000 |
Tim Englich |
Added Rasterdatasupport to the ARCSDE-Statement
|
| Sat, 19 Dec 2009 14:45:21 +0000 |
Sascha L. Teichmann |
Small fixes for Ehcache based SQL results caching.
|
| Fri, 18 Dec 2009 16:13:52 +0000 |
Sascha L. Teichmann |
Experimental caching of SQL results via Ehache
|
| Fri, 28 Sep 2012 12:13:49 +0200 |
Thomas Arendsen Hein |
merged gnv-artifacts/0.4
|
| Wed, 27 Jan 2010 15:03:16 +0000 |
Sascha L. Teichmann |
Reordered items in Changes a bit.
|
| Wed, 27 Jan 2010 14:38:27 +0000 |
Hans Plum |
Summarized Changes and NEWS for Release 0.4
|
| Wed, 27 Jan 2010 10:01:37 +0000 |
Ingo Weinzierl |
Solved issue 164 - applied patch of msg 763. Remove directories and shape files of out-dated artifacts.
|
| Tue, 26 Jan 2010 18:32:12 +0000 |
Ingo Weinzierl |
Calculate results and put them into cache when reaching the output state - avoids latencies.
|
| Tue, 26 Jan 2010 17:52:10 +0000 |
Ingo Weinzierl |
Solved issue158. Added labels to 'Profilschnitte'.
|
| Tue, 26 Jan 2010 14:19:59 +0000 |
Ingo Weinzierl |
Set white border for 'Profilschnitte' as default.
|
| Tue, 26 Jan 2010 12:00:20 +0000 |
Ingo Weinzierl |
Calculate results after reaching the output state and store them in cache.
|
| Tue, 26 Jan 2010 10:46:33 +0000 |
Ingo Weinzierl |
Splitted date selection of product 'Horizontalschnitt' into two steps.
|
| Tue, 26 Jan 2010 10:16:00 +0000 |
Ingo Weinzierl |
Removed csv export from product 'Profilschnitt'.
|
| Tue, 26 Jan 2010 10:07:44 +0000 |
Ingo Weinzierl |
Fixed an ArrayIndexOutOfBounds-exceptions which occured if there are less than two data points for chart creation.
|
| Tue, 26 Jan 2010 10:02:49 +0000 |
Ingo Weinzierl |
Solved issue161. Adapted transition model of verticalprofiles. Splitted date selection into two steps.
|
| Mon, 25 Jan 2010 18:25:19 +0000 |
Sascha L. Teichmann |
Fixed issue gnv/issue159
|
| Mon, 25 Jan 2010 17:06:01 +0000 |
Ingo Weinzierl |
Fixed issue157: Verticalcrosssection charts have a white background as all other chart types have.
|
| Mon, 25 Jan 2010 16:15:31 +0000 |
Ingo Weinzierl |
Copied method from JFreeChart to adapt date formats.
|
| Mon, 25 Jan 2010 13:48:52 +0000 |
Sascha L. Teichmann |
Set serverRoundtripInterval to 5 seconds and serverInactiveInterval to 5 minutes.
|
| Mon, 25 Jan 2010 11:40:05 +0000 |
Ingo Weinzierl |
Splitted data selection into two parts. Removed option to disable/enable data points in charts and exports.
|
| Mon, 25 Jan 2010 11:04:52 +0000 |
Ingo Weinzierl |
Splitted date selection of horizontal profile charts into two parts - selection of a year and selection of a concrete date of this year.
|
| Mon, 25 Jan 2010 09:18:31 +0000 |
Ingo Weinzierl |
Issue 156 solved. Added width, height and points as parameter to svg and pdf output mode. Width and height have an effact on the width and height of the export, points is a boolean property which enables/disables the drawing of data points.
|
| Sun, 24 Jan 2010 20:24:03 +0000 |
Sascha L. Teichmann |
Generate seabed polygon to "Profilschnitte".
|
| Sun, 24 Jan 2010 12:10:50 +0000 |
Sascha L. Teichmann |
Cosmetic cleanups on palette -> QQIS style transformation.
|
| Sat, 23 Jan 2010 21:16:45 +0000 |
Sascha L. Teichmann |
Last part to fix gnv/issue153. Now 'Profilschnitte', 'Horizontalschnitte' and 'horizontale Schnittprofile'
|
| Sat, 23 Jan 2010 18:10:34 +0000 |
Sascha L. Teichmann |
Try to cull points from set of input points when generating "Profilschnitte".
|
| Sat, 23 Jan 2010 17:42:04 +0000 |
Sascha L. Teichmann |
If the number of data points to generate a "Horizontalschnitt"
|
| Sat, 23 Jan 2010 14:03:26 +0000 |
Sascha L. Teichmann |
Added little XSL tranformation to turn palette XML files into QGIS style definitions.
|
| Fri, 22 Jan 2010 18:51:47 +0000 |
Sascha L. Teichmann |
Fixed "Profilschnitte" for gnv/issue153.
|
| Fri, 22 Jan 2010 18:22:11 +0000 |
Sascha L. Teichmann |
Fixed gnv/issue153
|
| Fri, 22 Jan 2010 15:45:59 +0000 |
Ingo Weinzierl |
Removed debug output which has been checked in by mistake.
|
| Fri, 22 Jan 2010 13:04:16 +0000 |
Tim Englich |
Added Description of the sense of the different Attributes of the Configurationfile meshwidth.xml.
|
| Fri, 22 Jan 2010 12:48:16 +0000 |
Tim Englich |
Make the mean with of an Mesh configurable issue93
|
| Fri, 22 Jan 2010 10:32:49 +0000 |
Tim Englich |
Fixed Compiler-Error after adding further Methods to the Interface ArtifactDatabase.
|
| Fri, 22 Jan 2010 08:13:39 +0000 |
Tim Englich |
Fixed Compiler-Error in JUnit-Test for ShapefileExport after changes in the Method-Signature.
|
| Thu, 21 Jan 2010 16:08:08 +0000 |
Ingo Weinzierl |
Removed never try-catch of a never thrown exception.
|
| Thu, 21 Jan 2010 14:42:51 +0000 |
Ingo Weinzierl |
Solved some issues. Removed encoding problems while formatting coordinates (issue137) and use this format as subtitle in charts (issue136).
|
| Thu, 21 Jan 2010 10:09:01 +0000 |
Ingo Weinzierl |
Solved issue100. Improved axes range. Scale dataset to its own axis.
|
| Wed, 20 Jan 2010 17:54:48 +0000 |
Ingo Weinzierl |
Solved issue152. Time intervals of timeseries axis are defined by JFreeChart automatically.
|
| Wed, 20 Jan 2010 16:05:52 +0000 |
Sascha L. Teichmann |
Trigger the calculation of the "Horizontalschnitt" when the output state is initialized.
|
| Wed, 20 Jan 2010 15:48:31 +0000 |
Ingo Weinzierl |
Solved issue 129. Renamed i and j axis to 'West-East-Axis' and 'North-South-Axis'.
|
| Wed, 20 Jan 2010 15:17:35 +0000 |
Ingo Weinzierl |
Fixed issue105. Added option to enable/disable data points in charts. Parse this option while creating charts.
|
| Wed, 20 Jan 2010 14:47:30 +0000 |
Sascha L. Teichmann |
Speed up the "Horizontalschnitte"
|
| Wed, 20 Jan 2010 08:50:10 +0000 |
Ingo Weinzierl |
Fixed some bugs in configuration regarding description and mimetype of svg exports.
|
| Tue, 19 Jan 2010 23:01:24 +0000 |
Sascha L. Teichmann |
Clip "Horizontalschnitte" against given clipping polygon.
|
| Tue, 19 Jan 2010 21:23:28 +0000 |
Sascha L. Teichmann |
Upgraded to Geotools 2.5.8. Write polygons and line strings to
|
| Tue, 19 Jan 2010 17:55:08 +0000 |
Sascha L. Teichmann |
Fixed import error.
|
| Tue, 19 Jan 2010 16:47:25 +0000 |
Ingo Weinzierl |
Issue142. Paid attention on array length. Parameters without values resulted in ArrayIndexOutOfBoundsExceptions.
|
| Tue, 19 Jan 2010 14:06:10 +0000 |
Sascha L. Teichmann |
Generate JTS geometries of "Horizontalschnitte" correctly.
|
| Tue, 19 Jan 2010 12:45:51 +0000 |
Tim Englich |
Do some Bugfixes after testing the Schema and Testdata against an Oracle 10.2 DBMS.
|
| Tue, 19 Jan 2010 10:58:46 +0000 |
Ingo Weinzierl |
Changed some method signatures of the State interface. Use CallContext objects instead of CallMeta objects which are a subset of CallContext.
|
| Tue, 19 Jan 2010 10:06:03 +0000 |
Ingo Weinzierl |
Added labels and titles to 'Profilschnitt' charts.
|
| Mon, 18 Jan 2010 15:49:12 +0000 |
Ingo Weinzierl |
Mark the fis select node with an attribute 'fis', which is important for the XSL sheet to create a link to step back to this point.
|
| Mon, 18 Jan 2010 15:14:22 +0000 |
Tim Englich |
Added Comments and further Informations to the external Interface Schema
|
| Mon, 18 Jan 2010 14:17:25 +0000 |
Tim Englich |
Added Database-Schema and Testdata for the MapViewer-Interface
|
| Mon, 18 Jan 2010 13:43:50 +0000 |
Ingo Weinzierl |
Appended the selected fis to the describe document.
|
| Mon, 18 Jan 2010 11:40:41 +0000 |
Sascha L. Teichmann |
Fixed indention of ChangeLog
|
| Mon, 18 Jan 2010 11:32:23 +0000 |
Tim Englich |
Fixed Unittest for HorizontalCrossSections.
|
| Mon, 18 Jan 2010 11:26:51 +0000 |
Tim Englich |
Fixed Compilation and Runtimeerrors in Unittests.
|
| Mon, 18 Jan 2010 11:25:52 +0000 |
Sascha L. Teichmann |
Generate JTS geometries (multi polygons and multi linestrings) from
|
| Mon, 18 Jan 2010 10:56:41 +0000 |
Sascha L. Teichmann |
Added explicit index scheme to palette classes to allow external references.
|
| Sun, 17 Jan 2010 21:26:21 +0000 |
Sascha L. Teichmann |
Fixed some bugs with calculating "Horizontalschnitte".
|
| Sun, 17 Jan 2010 16:34:11 +0000 |
Sascha L. Teichmann |
Added end of life support for artifact states. Implemented ZIP download
|
| Sun, 17 Jan 2010 12:22:56 +0000 |
Sascha L. Teichmann |
Rebased "Horizonalschnitte" to own state class to break from the not
|
| Fri, 15 Jan 2010 20:39:30 +0000 |
Sascha L. Teichmann |
Cleaned up imports
|
| Fri, 15 Jan 2010 18:21:49 +0000 |
Ingo Weinzierl |
Added support to step back to the point for choosing a product.
|
| Fri, 15 Jan 2010 10:13:18 +0000 |
Tim Englich |
Added the Configurationproperty serverRoundtripInterval to the Configuration of the Connectionpool.
|
| Fri, 15 Jan 2010 09:54:51 +0000 |
Tim Englich |
Added new Step for querying the Years where measurements has been done into the TestCase.
|
| Thu, 14 Jan 2010 11:07:27 +0000 |
Ingo Weinzierl |
Renamed FISSelectArtifact to SelectProductArtifact which fits better, because the intent of this artifact is to choose a product - not a fis.
|
| Thu, 14 Jan 2010 10:34:05 +0000 |
Sascha L. Teichmann |
Added area interpolation needed for "Horizontalschnitt"
|
| Wed, 13 Jan 2010 23:10:56 +0000 |
Ingo Weinzierl |
Added support to step back to previous states. Add state names to xform nodes in describe document and append old targets to list of reachable targets.
|
| Wed, 13 Jan 2010 18:58:26 +0000 |
Sascha L. Teichmann |
Added configuration of directory of "Horizontalschnitt" shape files.
|
| Tue, 12 Jan 2010 17:41:59 +0000 |
Sascha L. Teichmann |
Some minor code cleanup
|
| Tue, 12 Jan 2010 15:25:32 +0000 |
Ingo Weinzierl |
Added mechanism for advancing to previous states.
|
| Tue, 12 Jan 2010 12:42:53 +0000 |
Tim Englich |
Added a new State in Product Verticalprofile in Timeseriespoints.
|
| Tue, 12 Jan 2010 11:34:25 +0000 |
Tim Englich |
Added ij-Index determination for horizontal-cross-sections.
|
| Tue, 12 Jan 2010 08:49:51 +0000 |
Ingo Weinzierl |
Use XMLUtils to evaluate xpath expressions instead of using Config class. Adapted xpath (namespace and prefix).
|
| Mon, 11 Jan 2010 15:26:24 +0000 |
Tim Englich |
Set NameSpaceAware to true to get the Unittests work again.
|
| Mon, 11 Jan 2010 00:29:45 +0000 |
Sascha L. Teichmann |
Added support to trace rasters to JTS multi polygons and multi line strings.
|
| Sat, 09 Jan 2010 17:55:45 +0000 |
Ingo Weinzierl |
Next step of changing the concept how to use the user interface. Adapted namespaces and replaced FISArtifact with a ProxyArtifact.
|
| Sat, 09 Jan 2010 16:58:53 +0000 |
Sascha L. Teichmann |
Make ground interpolation for vertical cross section configurable.
|
| Sat, 09 Jan 2010 12:45:42 +0000 |
Sascha L. Teichmann |
Use new raster access.
|
| Fri, 08 Jan 2010 14:27:49 +0000 |
Tim Englich |
Removed Encodingerrors from listed Files. All Files are now UTF-8 compliant.
|
| Fri, 08 Jan 2010 13:04:29 +0000 |
Tim Englich |
Modified Testcases that they work using the ARCSDE 9.2
|
| Fri, 08 Jan 2010 10:01:35 +0000 |
Tim Englich |
Added the possibility to enter a Polygon represented by an WKT into the Workflow of the HorizontalCrossSections
|
| Wed, 06 Jan 2010 10:09:51 +0000 |
Sascha L. Teichmann |
Improved raster tile based height evaluation.
|
| Tue, 05 Jan 2010 14:12:03 +0000 |
Tim Englich |
Added RasterObject for caching the Rastertiles to get a better performance.
|
| Mon, 04 Jan 2010 15:41:29 +0000 |
Ingo Weinzierl |
Splitted code pathes of dynamic and static nodes. Static nodes contain the selected value only instead of transfering the whole stack of options again.
|
| Mon, 04 Jan 2010 15:27:33 +0000 |
Tim Englich |
Added Rasterdatasupport to VerticalCrossSections
|
| Mon, 04 Jan 2010 15:20:14 +0000 |
Sascha L. Teichmann |
Refactored statistics classes a bit. Added class for vertical cross sections.
|
| Mon, 04 Jan 2010 13:42:49 +0000 |
Sascha L. Teichmann |
vertical cross section: Fixed problem with running to max depth on every column in interpolation.
|
| Mon, 04 Jan 2010 13:14:27 +0000 |
Sascha L. Teichmann |
Enable PDF export of vertical cross section charts.
|
| Mon, 04 Jan 2010 12:42:16 +0000 |
Sascha L. Teichmann |
Use JFreeCharts ValueAxis.valueToJava2D() to transform data values
|
| Mon, 04 Jan 2010 02:49:42 +0000 |
Sascha L. Teichmann |
Render labels in vertical cross section charts.
|
| Sun, 03 Jan 2010 15:57:02 +0000 |
Sascha L. Teichmann |
Add only color to scale of vertical cross section which are in the chart.
|
| Sun, 03 Jan 2010 12:16:55 +0000 |
Sascha L. Teichmann |
Generate iso line classes according gnv-issues/issue108
|
| Fri, 01 Jan 2010 21:52:41 +0000 |
Sascha L. Teichmann |
Improved generation of iso lines in vertical cross section.
|
| Fri, 01 Jan 2010 12:08:05 +0000 |
Sascha L. Teichmann |
Connected vertical cross section with chart generation.
|
| Wed, 30 Dec 2009 23:02:10 +0000 |
Sascha L. Teichmann |
Fixed some bugs and create "Profilschnitt" polygons via configuration.
|
| Wed, 30 Dec 2009 10:35:19 +0000 |
Sascha L. Teichmann |
Added configuration for vertical cross sections ("Profilschnitte")
|
| Tue, 29 Dec 2009 14:54:17 +0000 |
Sascha L. Teichmann |
"horizontale Schnittprofile" are now configured via conf.xml
|
| Tue, 29 Dec 2009 10:09:26 +0000 |
Sascha L. Teichmann |
Create a new 'gnv' section in config file.
|
| Tue, 29 Dec 2009 06:53:31 +0000 |
Sascha L. Teichmann |
Added raster filter framework for "Profilschnitte"
|
| Mon, 28 Dec 2009 17:13:12 +0000 |
Sascha L. Teichmann |
Cleaned up messy code a bit in "Horizontales Schnittprofil" and "Profilschnitt".
|
| Mon, 28 Dec 2009 16:24:05 +0000 |
Sascha L. Teichmann |
Loop through configuration to chart generation.
|
| Mon, 28 Dec 2009 11:50:27 +0000 |
Sascha L. Teichmann |
Added manager to handle several levels of palette subdivsions.
|
| Sun, 27 Dec 2009 05:25:40 +0000 |
Sascha L. Teichmann |
Added vectorizer rings callback to generate iso lines.
|
| Sat, 26 Dec 2009 15:32:08 +0000 |
Sascha L. Teichmann |
Added vectorizer rings callback which generates polygon datasets suitable
|
| Fri, 25 Dec 2009 12:00:14 +0000 |
Sascha L. Teichmann |
Added code to split palette interval into equal sized parts.
|
| Wed, 23 Dec 2009 15:28:40 +0000 |
Sascha L. Teichmann |
Implemented the raster interpolation for the 'Profilschnitt'.
|
| Wed, 23 Dec 2009 12:20:25 +0000 |
Sascha L. Teichmann |
Added interpolation capabilities along z axis to XYColumns.
|
| Wed, 23 Dec 2009 09:45:40 +0000 |
Sascha L. Teichmann |
Added some type safety. Fixed z value bug in reading database preprocessing. Only dissemble WKT points if really needed.
|
| Wed, 23 Dec 2009 06:53:46 +0000 |
Sascha L. Teichmann |
Refactored the XYColumn and Point2d code a bit to be more reusable in 3D.
|
| Tue, 22 Dec 2009 20:45:45 +0000 |
Sascha L. Teichmann |
Load salinity palette correctly.
|
| Tue, 22 Dec 2009 17:19:10 +0000 |
Ingo Weinzierl |
Finished preprocessing data for interpolation in verticalcrosssection charts.ß
|
| Tue, 22 Dec 2009 13:18:07 +0000 |
Ingo Weinzierl |
Adjusted sql queries and configuration for verticalcrosssection products. Some code refactoring and improved error handling.
|
| Tue, 22 Dec 2009 13:10:56 +0000 |
Ingo Weinzierl |
Added data model classes to store information for interpolation.
|
| Tue, 22 Dec 2009 10:34:15 +0000 |
Sascha L. Teichmann |
Load palettes from configuration.
|
| Mon, 21 Dec 2009 19:58:17 +0000 |
Sascha L. Teichmann |
Horizontale Schnittprofile. Ignore invalid interpolation correctly.
|
| Mon, 21 Dec 2009 18:00:54 +0000 |
Sascha L. Teichmann |
Added support for converting 2D rasters into polygons.
|
| Mon, 21 Dec 2009 17:03:10 +0000 |
Ingo Weinzierl |
Moved some methods back to old place.
|
| Mon, 21 Dec 2009 16:47:45 +0000 |
Sascha L. Teichmann |
Added Ingo Weinzierl's special JFreeChart classes.
|
| Mon, 21 Dec 2009 16:01:35 +0000 |
Ingo Weinzierl |
Prepared state and transitions of verticalcrosssection.
|
| Mon, 21 Dec 2009 15:57:04 +0000 |
Ingo Weinzierl |
Outsourcing of some methods for preparing results for chart creation.
|
| Mon, 21 Dec 2009 15:28:33 +0000 |
Sascha L. Teichmann |
Added color palettes for several parameters.
|
| Mon, 21 Dec 2009 14:41:18 +0000 |
Sascha L. Teichmann |
Horizontales Schnittprofil:
|
| Mon, 21 Dec 2009 13:55:42 +0000 |
Ingo Weinzierl |
Removed warning, which told the user that no gap detection is implemented for horizontalcrossprofile charts.
|
| Mon, 21 Dec 2009 13:49:49 +0000 |
Ingo Weinzierl |
Added support of gap detection in horizontalcrossprofile charts.
|
| Wed, 27 Jan 2010 14:26:30 +0000 |
Hans Plum |
Summarized Changes and NEWS for Release 0.4
|
| Wed, 27 Jan 2010 13:26:02 +0000 |
Ingo Weinzierl |
Automatically select entry in multi select boxes if there is only one entry to avoid input failures.
|
| Mon, 25 Jan 2010 14:53:38 +0000 |
Ingo Weinzierl |
Refactored xsl sheet for ui's dynamic part: Removed local-name() method, put 'group' items into a table to be well aligned and set the size of multi select boxes to max 5 items or less.
|
| Fri, 22 Jan 2010 17:54:55 +0000 |
Ingo Weinzierl |
Add width, height and the boolean value to adjust the visibility of points in charts to the pdf and svg export links.
|
| Fri, 22 Jan 2010 16:08:42 +0000 |
Ingo Weinzierl |
Put former parameter into a fieldset with label and removed background image from all fieldsets.
|
| Fri, 22 Jan 2010 13:58:30 +0000 |
Ingo Weinzierl |
Added statistic to the actions if available.
|
| Fri, 22 Jan 2010 11:28:25 +0000 |
Ingo Weinzierl |
Moved user interface creation to an own action. This makes avoids code duplication and makes it easier to write new action to handle special interactions, because there is no need for parsing the describe document and creating the user interface after this.
|
| Fri, 22 Jan 2010 09:49:34 +0000 |
Ingo Weinzierl |
Design improvements: Moved chart option panel and export actions beneath the parameterization panel on the left side. Do not render a useless 'draw' button after reaching the final state.
|
| Wed, 20 Jan 2010 14:44:39 +0000 |
Ingo Weinzierl |
Fixed issue149. Render the chart if there are output modes existing for this state - not if there are further states. TODO: We should check if there is an output mode named 'chart' before rendering a chart.
|
| Wed, 20 Jan 2010 14:18:32 +0000 |
Ingo Weinzierl |
Added labels for chart option 'draw data points'.
|
| Wed, 20 Jan 2010 13:12:49 +0000 |
Ingo Weinzierl |
Adapted static ui to bsh style.
|
| Tue, 19 Jan 2010 16:34:28 +0000 |
Ingo Weinzierl |
Disabled step-back functionality.
|
| Tue, 19 Jan 2010 14:50:39 +0000 |
Tim Englich |
Added Junit-TestCase for the ExternalCallParser Interface
|
| Tue, 19 Jan 2010 14:47:36 +0000 |
Tim Englich |
Added the first Implementation (not complete and not ready to use) for the Interface from the MapViewer to the GNV
|
| Mon, 18 Jan 2010 16:21:54 +0000 |
Ingo Weinzierl |
Added a link to jump back to the fis selection.
|
| Mon, 18 Jan 2010 13:42:44 +0000 |
Ingo Weinzierl |
Just include a select box for choosing the fis if there is no static part in the describe document.
|
| Sun, 17 Jan 2010 21:18:30 +0000 |
Sascha L. Teichmann |
Using a simpler demo WKT polygon in "Horizontalschnitt".
|
| Sun, 17 Jan 2010 17:09:21 +0000 |
Sascha L. Teichmann |
Only display chart addons if we really display a chart.
|
| Sun, 17 Jan 2010 11:52:17 +0000 |
Sascha L. Teichmann |
Added download links for ZIP files and WMS layers.
|
| Fri, 15 Jan 2010 20:22:38 +0000 |
Sascha L. Teichmann |
Cleanup imports
|
| Thu, 14 Jan 2010 10:34:39 +0000 |
Ingo Weinzierl |
Fixed a bug which prevented the user to draw charts.
|
| Wed, 13 Jan 2010 22:17:02 +0000 |
Ingo Weinzierl |
Render links to step back to previous states into gui. Added controller to advance back to these states.
|
| Wed, 13 Jan 2010 11:29:40 +0000 |
Sascha L. Teichmann |
Fixes fake wkt polygon input.
|
| Wed, 13 Jan 2010 06:51:52 +0000 |
Sascha L. Teichmann |
Added wkt polygon to test the "Horizontalschnitt"
|
| Sat, 09 Jan 2010 17:02:03 +0000 |
Ingo Weinzierl |
Use XMLUtils.ElementCreator to create new nodes in xml documents.
|
| Fri, 08 Jan 2010 14:31:19 +0000 |
Tim Englich |
Removed Encodingerrors from listed Files. All Files are now UTF-8 compliant.
|
| Wed, 06 Jan 2010 09:13:45 +0000 |
Ingo Weinzierl |
Removed local-name() method from xsl stylesheet and adjusted xpathes while reading xml documents.
|
| Tue, 05 Jan 2010 08:52:49 +0000 |
Ingo Weinzierl |
Removed for-each statements and replaced them with templates.
|
| Mon, 04 Jan 2010 15:15:38 +0000 |
Ingo Weinzierl |
First step of changing the operation concept. Static nodes will be rendered as text instead of disabled xforms.
|
| Fri, 28 Sep 2012 12:13:47 +0200 |
Thomas Arendsen Hein |
merged geo-backend/0.3
0.3
|
| Thu, 17 Dec 2009 14:35:02 +0000 |
Sascha L. Teichmann |
Release 0.3
|
| Thu, 17 Dec 2009 11:14:45 +0000 |
Ingo Weinzierl |
Fixed a bug in DefaultResult when querying an index out of bounds.
|
| Tue, 15 Dec 2009 10:02:24 +0000 |
Tim Englich |
Added Point in Polygon Query Support to ArcSDE-Statement-Processing
|
| Fri, 11 Dec 2009 10:45:18 +0000 |
Ingo Weinzierl |
Changed exception handling if a the value of a column, which is not contained in Result, is requested. Will not throw an exception but return null.
|
| Fri, 11 Dec 2009 10:34:36 +0000 |
Sascha L. Teichmann |
Removed needless imports
|
| Mon, 30 Nov 2009 14:51:09 +0000 |
Tim Englich |
Added missing Methodstubs for Java 1.6 compability.
|
| Fri, 27 Nov 2009 13:13:34 +0000 |
Tim Englich |
Revert Changes of the commit of Revision 377 which was unintended
|
| Fri, 27 Nov 2009 13:09:48 +0000 |
Tim Englich |
Changed Splitalgorithm of Statements so that it is Possible to add to_date Colums into a Statement
|
| Fri, 27 Nov 2009 12:59:04 +0000 |
Tim Englich |
Added RegionFilter-Support to HorizontalProfile InstantaneousPoint
|
| Fri, 28 Sep 2012 12:13:47 +0200 |
Thomas Arendsen Hein |
merged gnv-artifacts/0.3
|
| Thu, 17 Dec 2009 18:56:03 +0000 |
Sascha L. Teichmann |
Release 0.3
|
| Thu, 17 Dec 2009 18:05:23 +0000 |
Sascha L. Teichmann |
Bind REST server to localhost.
|
| Thu, 17 Dec 2009 16:57:05 +0000 |
Sascha L. Teichmann |
s/Modeldaten/Modelldaten/
|
| Thu, 17 Dec 2009 16:08:37 +0000 |
Sascha L. Teichmann |
Fixed typo
|
| Thu, 17 Dec 2009 15:39:20 +0000 |
Sascha L. Teichmann |
Remove wkt line strings from i18n
|
| Thu, 17 Dec 2009 13:21:43 +0000 |
Ingo Weinzierl |
Changed depending value for gap detection in verticalprofile charts on meshes.
|
| Thu, 17 Dec 2009 11:42:21 +0000 |
Ingo Weinzierl |
Fixed file-leak bug and sourced xml parsing out to XMLUtils of artifactdatabase.
|
| Thu, 17 Dec 2009 10:20:05 +0000 |
Ingo Weinzierl |
Added column labels for csv export of timeseries, vertical and horizontal profiles.
|
| Wed, 16 Dec 2009 23:07:47 +0000 |
Hans Plum |
Issue 129: Fixed i18n strings for german language
|
| Wed, 16 Dec 2009 22:10:46 +0000 |
Sascha L. Teichmann |
Fixed index error in i-gap detection in 2D interpolation.
|
| Wed, 16 Dec 2009 19:29:05 +0000 |
Ingo Weinzierl |
Added horizontal crossprofile charts to chart pallet. Fixed some bugs before interpolation.
|
| Wed, 16 Dec 2009 11:58:44 +0000 |
Ingo Weinzierl |
Workarround: Store lower and upper bounds of data while iterating over all data and set the max range of axes with these information. JFreeCharts method NumberAxis.setAutoRange(true) doesn't seem to work properly.
|
| Wed, 16 Dec 2009 08:05:25 +0000 |
Ingo Weinzierl |
Removed usesless chart factories.
|
| Wed, 16 Dec 2009 01:32:19 +0000 |
Sascha L. Teichmann |
Added result set handling. Needs some testing.
|
| Tue, 15 Dec 2009 22:25:53 +0000 |
Sascha L. Teichmann |
Added code to do 2D interpolations along a digitied track on the map.
|
| Tue, 15 Dec 2009 15:58:58 +0000 |
Sascha L. Teichmann |
Added mapping from linear diagram space to 2D map coordinates.
|
| Tue, 15 Dec 2009 15:50:39 +0000 |
Tim Englich |
Issue96 Resloved big that one entry is missiing in the Statitic.
|
| Tue, 15 Dec 2009 15:30:25 +0000 |
Ingo Weinzierl |
Fetch ChartTheme from CallContext instead of creating it each time before creating a chart.
|
| Tue, 15 Dec 2009 15:14:21 +0000 |
Sascha L. Teichmann |
Fill (i, j)-gaps when building index buffer.
|
| Tue, 15 Dec 2009 14:55:42 +0000 |
Tim Englich |
Added the Unit of the Parameter to the Query for Parameters in
|
| Tue, 15 Dec 2009 14:35:41 +0000 |
Sascha L. Teichmann |
Forget to check in pom.xml
|
| Tue, 15 Dec 2009 14:12:58 +0000 |
Sascha L. Teichmann |
Upgraded to Apache Commons Math 2.0.
|
| Tue, 15 Dec 2009 10:31:16 +0000 |
Tim Englich |
Added the name Productname for "horizontale Schnittprofile". to the
|
| Tue, 15 Dec 2009 10:20:16 +0000 |
Tim Englich |
Added Support for "horizontale Schnittprofile"
|
| Tue, 15 Dec 2009 10:13:09 +0000 |
Ingo Weinzierl |
Stabilized color of lines in charts. Exports (pdf, svg, png) will look like the chart in gui.
|
| Mon, 14 Dec 2009 15:56:20 +0000 |
Ingo Weinzierl |
Changed date representation in timeseries charts. Date format is sourced out to language ressource files.
|
| Mon, 14 Dec 2009 14:36:43 +0000 |
Sascha L. Teichmann |
Added buffer creator in index (i, j) space.
|
| Fri, 11 Dec 2009 11:18:21 +0000 |
Ingo Weinzierl |
Included case, that there is no start or end date while creating subtitles of horizontalprofile charts.
|
| Fri, 11 Dec 2009 10:41:24 +0000 |
Sascha L. Teichmann |
Removed needless imports.
|
| Fri, 11 Dec 2009 10:13:39 +0000 |
Tim Englich |
Added Z-Value to verticalcrosssection_mesh_chart_data.
|
| Fri, 11 Dec 2009 10:02:10 +0000 |
Tim Englich |
Split all Unittestcases in separat Classes. Now it is easier to uses the UnitTests with Maven.
|
| Fri, 11 Dec 2009 09:42:54 +0000 |
Ingo Weinzierl |
Fade out range axis gridlines in charts if there are more than one axis.
|
| Fri, 11 Dec 2009 09:05:17 +0000 |
Ingo Weinzierl |
Added axis labels for charts and use them while generating charts.
|
| Fri, 11 Dec 2009 08:44:46 +0000 |
Ingo Weinzierl |
Read x-axis label for timeseries charts from ressources, instead of a hard coded string in source.
|
| Wed, 09 Dec 2009 10:22:49 +0000 |
Ingo Weinzierl |
Added ChangeLog entry for last commit.
|
| Wed, 09 Dec 2009 10:22:20 +0000 |
Ingo Weinzierl |
Added gap detection in horizontal and vertical profile charts. Distinguish between meshes and other data sources.
|
| Wed, 09 Dec 2009 09:47:10 +0000 |
Sascha L. Teichmann |
Dead artifacts are removed only every 15mins from
|
| Tue, 08 Dec 2009 13:52:42 +0000 |
Tim Englich |
Added the Unit of the Parameter to the Query for Parameters in
|
| Tue, 08 Dec 2009 13:38:21 +0000 |
Tim Englich |
Last Step of the Refactoring Work on the Transition Model.
|
| Tue, 08 Dec 2009 11:18:27 +0000 |
Ingo Weinzierl |
Added marker for different data sources in sql queries.
|
| Tue, 08 Dec 2009 08:39:03 +0000 |
Tim Englich |
Some Refactoring work done.
|
| Mon, 07 Dec 2009 17:03:24 +0000 |
Ingo Weinzierl |
Changed the way of adding data to charts. Same parameters have one axis - not each parameter its own one.
|
| Mon, 07 Dec 2009 10:33:31 +0000 |
Ingo Weinzierl |
Sourced ChartFactory call out to an own method, which is overriden by TimeSeriesChart.
|
| Fri, 04 Dec 2009 15:31:07 +0000 |
Ingo Weinzierl |
ChangeLog entry and ressource bundles for last commit.
|
| Fri, 04 Dec 2009 15:30:20 +0000 |
Ingo Weinzierl |
Added subtitles to charts.
|
| Fri, 04 Dec 2009 09:04:10 +0000 |
Sascha L. Teichmann |
Cleaned up ChangeLog a bit.
|
| Wed, 02 Dec 2009 15:42:46 +0000 |
Ingo Weinzierl |
Added time gap detection to time series charts.
|
| Wed, 02 Dec 2009 11:07:40 +0000 |
Ingo Weinzierl |
Added JBoss repository for JFreeChart 1.0.13.
|
| Wed, 02 Dec 2009 10:50:12 +0000 |
Ingo Weinzierl |
New options in chart template: visibility of lines and points in charts and point's size.
|
| Tue, 01 Dec 2009 16:27:56 +0000 |
Tim Englich |
Added one more Transitionstep to each Testcase according to the refactored Transitionmodel.
|
| Tue, 01 Dec 2009 15:58:02 +0000 |
Tim Englich |
Refactoring of the Transitionmodel.
|
| Mon, 30 Nov 2009 15:08:47 +0000 |
Ingo Weinzierl |
Removed needless imports.
|
| Mon, 30 Nov 2009 15:04:26 +0000 |
Ingo Weinzierl |
Updated Batik library to 1.7
|
| Mon, 30 Nov 2009 14:19:23 +0000 |
Ingo Weinzierl |
Completed last commit.
|
| Mon, 30 Nov 2009 14:18:37 +0000 |
Ingo Weinzierl |
Implemented svg export of charts.
|
| Mon, 30 Nov 2009 09:51:59 +0000 |
Ingo Weinzierl |
Implemented pdf export of charts.
|
| Fri, 27 Nov 2009 13:00:00 +0000 |
Tim Englich |
Added RegionFilter-Support to HorizontalProfile InstantaneousPoint
|
| Thu, 26 Nov 2009 16:10:47 +0000 |
Ingo Weinzierl |
Implemented a helper class for exporting charts. Adapted code.
|
| Thu, 26 Nov 2009 15:59:25 +0000 |
Ingo Weinzierl |
Added pdf as export format to xml configuration of products.
|
| Thu, 26 Nov 2009 08:54:50 +0000 |
Ingo Weinzierl |
Added point in TODO regarding tick-unit distance of timeseries charts.
|
| Thu, 26 Nov 2009 08:47:44 +0000 |
Ingo Weinzierl |
Localization of chart axis with locale which fits best to server and browser settings.
|
| Thu, 26 Nov 2009 08:45:04 +0000 |
Ingo Weinzierl |
Added ChangeLog entry from last commit.
|
| Thu, 26 Nov 2009 08:40:15 +0000 |
Ingo Weinzierl |
New method in RessourceFactory to read locales supported by the server. Added config file for supported locales.
|
| Wed, 25 Nov 2009 11:41:42 +0000 |
Ingo Weinzierl |
Generate timeseries chart in TimeSeriesChart class instead of AbstractXYChart to instantiate special timeseries charts.
|
| Wed, 25 Nov 2009 09:32:00 +0000 |
Ingo Weinzierl |
Corrected committer from the last revision in ChangeLog.
|
| Tue, 24 Nov 2009 19:14:58 +0000 |
Ingo Weinzierl |
Added timegap definitions to charts. Adapted constructors and constructor calls.
|
| Tue, 24 Nov 2009 15:59:51 +0000 |
Tim Englich |
Added new Timevalues because the Data in the DWH has changed.
|
| Tue, 24 Nov 2009 14:40:53 +0000 |
Ingo Weinzierl |
Added dependencies for esri and ibm libraries required for unit tests.
|
| Tue, 24 Nov 2009 14:39:36 +0000 |
Tim Englich |
Fixed some broken Method-Extentions.
|
| Tue, 24 Nov 2009 13:29:36 +0000 |
Tim Englich |
Bugfix for issue91, wrong depth will be drawn in TimeseriesCharts in Meshes
|
| Mon, 23 Nov 2009 17:20:14 +0000 |
Ingo Weinzierl |
Remove chart from cache when data which is displayed in chart has changed.
|
| Mon, 23 Nov 2009 17:01:28 +0000 |
Ingo Weinzierl |
The style of charts can be configured with ChartThemes using XML configuration files.
|
| Fri, 20 Nov 2009 15:45:25 +0000 |
Ingo Weinzierl |
Export format of charts is related to mime-type.
|
| Fri, 20 Nov 2009 14:46:37 +0000 |
Ingo Weinzierl |
Removed mistake from xml structure of the artifact protocol.
|
| Fri, 20 Nov 2009 14:03:31 +0000 |
Ingo Weinzierl |
Removed duplicated and needless imports.
|
| Fri, 20 Nov 2009 13:51:14 +0000 |
Ingo Weinzierl |
Refactored process of chart generation. Charts will be generated via Chart-Interface from rev351 and no more via factory classes.
|
| Thu, 19 Nov 2009 17:54:18 +0000 |
Ingo Weinzierl |
Pass the xml document of the request to OutputTransition for more information about output formats of charts (png,jpeg).
|
| Thu, 19 Nov 2009 15:30:27 +0000 |
Ingo Weinzierl |
Implementation of classes for creating timeseries, verticalprofile and horizontalprofile charts.
|
| Thu, 19 Nov 2009 15:24:45 +0000 |
Ingo Weinzierl |
Interface and abstract classes for chart creation implemented.
|
| Thu, 19 Nov 2009 15:13:11 +0000 |
Ingo Weinzierl |
Declared a method as static to use it without instantiating an object of its class.
|
| Tue, 17 Nov 2009 11:51:33 +0000 |
Ingo Weinzierl |
Updated JFreeChart to 1.0.13 and added dependency of JCommon 1.0.15
|
| Tue, 17 Nov 2009 11:12:21 +0000 |
Ingo Weinzierl |
Updated JFreeChart library from 1.0.7 to 1.0.12
|
| Thu, 17 Dec 2009 18:28:20 +0000 |
Sascha L. Teichmann |
Release 0.3
|
| Thu, 17 Dec 2009 17:00:15 +0000 |
Sascha L. Teichmann |
s/Modeldaten/Modelldaten/
|
| Thu, 17 Dec 2009 15:41:26 +0000 |
Sascha L. Teichmann |
Added demo wkt linestrings via xslt and javascript.
|
| Wed, 16 Dec 2009 23:10:03 +0000 |
Hans Plum |
Issue 129: Fixed i18n strings for german language
|
| Mon, 14 Dec 2009 16:14:33 +0000 |
Tim Englich |
Added Support for Boolean-Output-Parameters in Diagramm-Options
|
| Mon, 14 Dec 2009 14:59:34 +0000 |
Hans Plum |
issue 109: Obsolete attributes in Tomcat removed
|
| Wed, 09 Dec 2009 10:28:54 +0000 |
Sascha L. Teichmann |
Fixed some spelling problems in german i18n file
|
| Tue, 01 Dec 2009 16:01:21 +0000 |
Tim Englich |
Removed feed Call before Chart- and Statisticsgeneration is called, because
|
| Tue, 01 Dec 2009 07:58:50 +0000 |
Ingo Weinzierl |
Reverted changes in config from last revision.
|
| Mon, 30 Nov 2009 17:46:57 +0000 |
Ingo Weinzierl |
Added link in gui to export charts to svg.
|
| Mon, 30 Nov 2009 09:57:12 +0000 |
Ingo Weinzierl |
Added link in gui to export charts to pdf.
|
| Mon, 23 Nov 2009 16:30:33 +0000 |
Tim Englich |
Added the Possibility to get Version-Infomation and Release Date/Time from the GNV-Project using a Browser issue87
|
| Fri, 20 Nov 2009 14:48:33 +0000 |
Ingo Weinzierl |
Removed mistake in xml structure of the artifact protocol.
|
| Fri, 28 Sep 2012 12:13:45 +0200 |
Thomas Arendsen Hein |
merged geo-backend/0.2
0.2
|
| Fri, 13 Nov 2009 18:21:31 +0000 |
Hans Plum |
RELEASE 0.2: Summarized contents
|
| Fri, 13 Nov 2009 18:20:10 +0000 |
Hans Plum |
Made some ChangeLog entries a bit clearer.
|
| Tue, 10 Nov 2009 11:47:59 +0000 |
Tim Englich |
Changed the splitting of the Statements for ARCSDE-Transformation.
|
| Fri, 06 Nov 2009 09:32:48 +0000 |
Ingo Weinzierl |
Removed target from version control.
|
| Thu, 05 Nov 2009 15:03:51 +0000 |
Tim Englich |
Added the possibility to use Innerselects in SpatialQueries
|
| Mon, 02 Nov 2009 10:53:06 +0000 |
Tim Englich |
General CodecCleanup:
|
| Fri, 30 Oct 2009 11:11:55 +0000 |
Tim Englich |
Polygon and 3D Support was added to the WKT-Representation.
|
| Thu, 29 Oct 2009 16:00:45 +0000 |
Tim Englich |
Added Integer-Support for DoubleValues because the ArcSDE does
|
| Tue, 20 Oct 2009 09:57:52 +0000 |
Tim Englich |
Integrated Patch of issue57 to get some Memoryusage-improvements
|
| Mon, 19 Oct 2009 10:27:24 +0000 |
Sascha L. Teichmann |
DefaultResult now directly inherits from HashMap.
|
| Wed, 14 Oct 2009 10:58:49 +0000 |
Tim Englich |
Added further Queries for Testing Spatial-Query-Support
|
| Wed, 14 Oct 2009 10:01:45 +0000 |
Tim Englich |
Add WKT-Syntaxt to Shape ReturnValue
|
| Wed, 14 Oct 2009 09:28:18 +0000 |
Tim Englich |
Added InnerJoin, Order By and Group By Support to Spatial-Queries
|
| Tue, 13 Oct 2009 14:30:52 +0000 |
Tim Englich |
Added SFS-Support to ArcSDE-Query-Part without any Spatial restriction in the where clause
|
| Tue, 13 Oct 2009 13:20:26 +0000 |
Tim Englich |
Fixed issue 34
|
| Tue, 13 Oct 2009 09:00:30 +0000 |
Tim Englich |
Added SFS-Support to ArcSDE-Query-Part
|
| Tue, 13 Oct 2009 08:57:19 +0000 |
Tim Englich |
Added SFS-Support to ArcSDE-Query-Part
|
| Fri, 28 Sep 2012 12:13:44 +0200 |
Thomas Arendsen Hein |
merged gnv-artifacts/0.2
|
| Mon, 16 Nov 2009 08:19:04 +0000 |
Ingo Weinzierl |
Added start-script to version control.
|
| Fri, 13 Nov 2009 20:29:29 +0000 |
Hans Plum |
RELEASE 0.2: Summarized activities in NEWS, Changes
|
| Fri, 13 Nov 2009 19:15:30 +0000 |
Hans Plum |
Unified style of ChangeLog descriptions refering to issues
|
| Fri, 13 Nov 2009 14:51:58 +0000 |
Tim Englich |
Moved Comment according to Instantiationerrors loading Artifact.
|
| Fri, 13 Nov 2009 13:01:01 +0000 |
Tim Englich |
Added Documentation of Configuration-Files
|
| Fri, 13 Nov 2009 09:57:25 +0000 |
Tim Englich |
Removed Statisticsupport for VerticalCrossSection and HorizontalCrossSection according to Requirement TG_0030.061
|
| Thu, 12 Nov 2009 14:47:20 +0000 |
Tim Englich |
Added proper values for calculating the Statistics of VerticalProfiles and HorizontalProfiles issue86
|
| Thu, 12 Nov 2009 11:40:32 +0000 |
Tim Englich |
Translated "Keine Auswahl" to "No Selection" according to the Specification that
|
| Thu, 12 Nov 2009 10:15:05 +0000 |
Tim Englich |
Put a name to each Statistic group which is similar to the name of the
|
| Wed, 11 Nov 2009 15:54:31 +0000 |
Tim Englich |
Added Validation if a given maxvalue is greater than a given minvalue issue19
|
| Wed, 11 Nov 2009 12:16:15 +0000 |
Tim Englich |
BugFix: The Value of SingleInputFields will now also be shown in the static ui. issue81
|
| Wed, 11 Nov 2009 09:52:16 +0000 |
Tim Englich |
BugFix: Storage of "feeded" MinMaxValues will now work. issue79
|
| Wed, 11 Nov 2009 08:31:59 +0000 |
Tim Englich |
Removed unnecessary characters 'v' from the Documents. issue76
|
| Tue, 10 Nov 2009 15:41:31 +0000 |
Tim Englich |
Added Ressources for the AreaFilter Ids areaid and subareid
|
| Tue, 10 Nov 2009 15:31:39 +0000 |
Tim Englich |
Sort Columns to the given order of the ODV-Specification
|
| Tue, 10 Nov 2009 14:37:42 +0000 |
Tim Englich |
Added ODV-Export to VerticalCrossSection on Meshes
|
| Tue, 10 Nov 2009 14:10:52 +0000 |
Tim Englich |
Added ODV-Export to HorizontalCrossSection on Meshes
|
| Tue, 10 Nov 2009 11:48:41 +0000 |
Tim Englich |
Added ODV-Export to HorizontalProfiles on InstantaneousPoint
|
| Tue, 10 Nov 2009 09:06:35 +0000 |
Tim Englich |
Added ODV-Export to VerticalProfiles in InstantaneousPoint
|
| Tue, 10 Nov 2009 08:35:18 +0000 |
Tim Englich |
Added ODV-Export to HorizontalProfiles in Meshes
|
| Mon, 09 Nov 2009 15:24:41 +0000 |
Tim Englich |
Added ODV-Export to VerticalProfiles
|
| Mon, 09 Nov 2009 14:20:27 +0000 |
Tim Englich |
Added ODV-Export-Support to TimeSeries Mesh
|
| Mon, 09 Nov 2009 14:11:09 +0000 |
Ingo Weinzierl |
Added possibility to print column labels in the first line of an export. Added labels for odv export as well.
|
| Mon, 09 Nov 2009 13:48:50 +0000 |
Ingo Weinzierl |
ODV-export for timeseries completed.
|
| Mon, 09 Nov 2009 13:11:33 +0000 |
Tim Englich |
Added SQL-Statement for ODV-Exports on Verticalprofiles TimeSeriesPoints
|
| Mon, 09 Nov 2009 13:10:17 +0000 |
Tim Englich |
Added SQL-Statement-ID for ODV-Exports on Verticalprofiles TimeSeriesPoints
|
| Mon, 09 Nov 2009 10:16:10 +0000 |
Ingo Weinzierl |
Renaming HorizontalProfileDataCollector into ShapeDataCollector.
|
| Mon, 09 Nov 2009 09:52:18 +0000 |
Ingo Weinzierl |
HorizontalProfile CSV-export uses an Exporter instead of writing csv on its own.
|
| Mon, 09 Nov 2009 09:43:52 +0000 |
Ingo Weinzierl |
Added DataCollector which collects data used for exports.
|
| Mon, 09 Nov 2009 08:55:01 +0000 |
Tim Englich |
Added special Data-Selection to the ODV-Exports of TimeSeries on TimeSeriesPoints. issue68
|
| Fri, 06 Nov 2009 11:12:45 +0000 |
Tim Englich |
Added the Region-Filter to the Workflow of the Artifacttescases to be able to test it automatically.
|
| Fri, 06 Nov 2009 10:56:18 +0000 |
Ingo Weinzierl |
Implemented an exporter for odv and csv exports.
|
| Fri, 06 Nov 2009 10:23:55 +0000 |
Tim Englich |
Added the Region-Filter to the Workflow of the Artifacttescases to be able to test it automatically.
|
| Fri, 06 Nov 2009 10:22:00 +0000 |
Ingo Weinzierl |
Added missing ChangeLog entry for last revision.
|
| Fri, 06 Nov 2009 10:20:55 +0000 |
Ingo Weinzierl |
Added odv output format to products.
|
| Fri, 06 Nov 2009 10:03:52 +0000 |
Tim Englich |
Bugfix Gap-Calculation moved maxGap into negative Valies because of overflow of Long-Variable.
|
