Sun, 17 Jan 2010 21:26:21 +0000 |
Sascha L. Teichmann |
Fixed some bugs with calculating "Horizontalschnitte".
|
Sun, 17 Jan 2010 16:34:11 +0000 |
Sascha L. Teichmann |
Added end of life support for artifact states. Implemented ZIP download
|
Sun, 17 Jan 2010 12:22:56 +0000 |
Sascha L. Teichmann |
Rebased "Horizonalschnitte" to own state class to break from the not
|
Fri, 15 Jan 2010 20:39:30 +0000 |
Sascha L. Teichmann |
Cleaned up imports
|
Fri, 15 Jan 2010 18:21:49 +0000 |
Ingo Weinzierl |
Added support to step back to the point for choosing a product.
|
Fri, 15 Jan 2010 10:13:18 +0000 |
Tim Englich |
Added the Configurationproperty serverRoundtripInterval to the Configuration of the Connectionpool.
|
Fri, 15 Jan 2010 09:54:51 +0000 |
Tim Englich |
Added new Step for querying the Years where measurements has been done into the TestCase.
|
Thu, 14 Jan 2010 11:07:27 +0000 |
Ingo Weinzierl |
Renamed FISSelectArtifact to SelectProductArtifact which fits better, because the intent of this artifact is to choose a product - not a fis.
|
Thu, 14 Jan 2010 10:34:05 +0000 |
Sascha L. Teichmann |
Added area interpolation needed for "Horizontalschnitt"
|
Wed, 13 Jan 2010 23:10:56 +0000 |
Ingo Weinzierl |
Added support to step back to previous states. Add state names to xform nodes in describe document and append old targets to list of reachable targets.
|
Wed, 13 Jan 2010 18:58:26 +0000 |
Sascha L. Teichmann |
Added configuration of directory of "Horizontalschnitt" shape files.
|
Tue, 12 Jan 2010 17:41:59 +0000 |
Sascha L. Teichmann |
Some minor code cleanup
|
Tue, 12 Jan 2010 15:25:32 +0000 |
Ingo Weinzierl |
Added mechanism for advancing to previous states.
|
Tue, 12 Jan 2010 12:42:53 +0000 |
Tim Englich |
Added a new State in Product Verticalprofile in Timeseriespoints.
|
Tue, 12 Jan 2010 11:34:25 +0000 |
Tim Englich |
Added ij-Index determination for horizontal-cross-sections.
|
Tue, 12 Jan 2010 08:49:51 +0000 |
Ingo Weinzierl |
Use XMLUtils to evaluate xpath expressions instead of using Config class. Adapted xpath (namespace and prefix).
|
Mon, 11 Jan 2010 15:26:24 +0000 |
Tim Englich |
Set NameSpaceAware to true to get the Unittests work again.
|
Mon, 11 Jan 2010 00:29:45 +0000 |
Sascha L. Teichmann |
Added support to trace rasters to JTS multi polygons and multi line strings.
|
Sat, 09 Jan 2010 17:55:45 +0000 |
Ingo Weinzierl |
Next step of changing the concept how to use the user interface. Adapted namespaces and replaced FISArtifact with a ProxyArtifact.
|
Sat, 09 Jan 2010 16:58:53 +0000 |
Sascha L. Teichmann |
Make ground interpolation for vertical cross section configurable.
|
Sat, 09 Jan 2010 12:45:42 +0000 |
Sascha L. Teichmann |
Use new raster access.
|
Fri, 08 Jan 2010 14:27:49 +0000 |
Tim Englich |
Removed Encodingerrors from listed Files. All Files are now UTF-8 compliant.
|
Fri, 08 Jan 2010 13:04:29 +0000 |
Tim Englich |
Modified Testcases that they work using the ARCSDE 9.2
|
Fri, 08 Jan 2010 10:01:35 +0000 |
Tim Englich |
Added the possibility to enter a Polygon represented by an WKT into the Workflow of the HorizontalCrossSections
|
Wed, 06 Jan 2010 10:09:51 +0000 |
Sascha L. Teichmann |
Improved raster tile based height evaluation.
|
Tue, 05 Jan 2010 14:12:03 +0000 |
Tim Englich |
Added RasterObject for caching the Rastertiles to get a better performance.
|
Mon, 04 Jan 2010 15:41:29 +0000 |
Ingo Weinzierl |
Splitted code pathes of dynamic and static nodes. Static nodes contain the selected value only instead of transfering the whole stack of options again.
|
Mon, 04 Jan 2010 15:27:33 +0000 |
Tim Englich |
Added Rasterdatasupport to VerticalCrossSections
|
Mon, 04 Jan 2010 15:20:14 +0000 |
Sascha L. Teichmann |
Refactored statistics classes a bit. Added class for vertical cross sections.
|
Mon, 04 Jan 2010 13:42:49 +0000 |
Sascha L. Teichmann |
vertical cross section: Fixed problem with running to max depth on every column in interpolation.
|
Mon, 04 Jan 2010 13:14:27 +0000 |
Sascha L. Teichmann |
Enable PDF export of vertical cross section charts.
|
Mon, 04 Jan 2010 12:42:16 +0000 |
Sascha L. Teichmann |
Use JFreeCharts ValueAxis.valueToJava2D() to transform data values
|
Mon, 04 Jan 2010 02:49:42 +0000 |
Sascha L. Teichmann |
Render labels in vertical cross section charts.
|
Sun, 03 Jan 2010 15:57:02 +0000 |
Sascha L. Teichmann |
Add only color to scale of vertical cross section which are in the chart.
|
Sun, 03 Jan 2010 12:16:55 +0000 |
Sascha L. Teichmann |
Generate iso line classes according gnv-issues/issue108
|
Fri, 01 Jan 2010 21:52:41 +0000 |
Sascha L. Teichmann |
Improved generation of iso lines in vertical cross section.
|
Fri, 01 Jan 2010 12:08:05 +0000 |
Sascha L. Teichmann |
Connected vertical cross section with chart generation.
|
Wed, 30 Dec 2009 23:02:10 +0000 |
Sascha L. Teichmann |
Fixed some bugs and create "Profilschnitt" polygons via configuration.
|
Wed, 30 Dec 2009 10:35:19 +0000 |
Sascha L. Teichmann |
Added configuration for vertical cross sections ("Profilschnitte")
|
Tue, 29 Dec 2009 14:54:17 +0000 |
Sascha L. Teichmann |
"horizontale Schnittprofile" are now configured via conf.xml
|
Tue, 29 Dec 2009 10:09:26 +0000 |
Sascha L. Teichmann |
Create a new 'gnv' section in config file.
|
Tue, 29 Dec 2009 06:53:31 +0000 |
Sascha L. Teichmann |
Added raster filter framework for "Profilschnitte"
|
Mon, 28 Dec 2009 17:13:12 +0000 |
Sascha L. Teichmann |
Cleaned up messy code a bit in "Horizontales Schnittprofil" and "Profilschnitt".
|
Mon, 28 Dec 2009 16:24:05 +0000 |
Sascha L. Teichmann |
Loop through configuration to chart generation.
|
Mon, 28 Dec 2009 11:50:27 +0000 |
Sascha L. Teichmann |
Added manager to handle several levels of palette subdivsions.
|
Sun, 27 Dec 2009 05:25:40 +0000 |
Sascha L. Teichmann |
Added vectorizer rings callback to generate iso lines.
|
Sat, 26 Dec 2009 15:32:08 +0000 |
Sascha L. Teichmann |
Added vectorizer rings callback which generates polygon datasets suitable
|
Fri, 25 Dec 2009 12:00:14 +0000 |
Sascha L. Teichmann |
Added code to split palette interval into equal sized parts.
|
Wed, 23 Dec 2009 15:28:40 +0000 |
Sascha L. Teichmann |
Implemented the raster interpolation for the 'Profilschnitt'.
|
Wed, 23 Dec 2009 12:20:25 +0000 |
Sascha L. Teichmann |
Added interpolation capabilities along z axis to XYColumns.
|
Wed, 23 Dec 2009 09:45:40 +0000 |
Sascha L. Teichmann |
Added some type safety. Fixed z value bug in reading database preprocessing. Only dissemble WKT points if really needed.
|
Wed, 23 Dec 2009 06:53:46 +0000 |
Sascha L. Teichmann |
Refactored the XYColumn and Point2d code a bit to be more reusable in 3D.
|
Tue, 22 Dec 2009 20:45:45 +0000 |
Sascha L. Teichmann |
Load salinity palette correctly.
|
Tue, 22 Dec 2009 17:19:10 +0000 |
Ingo Weinzierl |
Finished preprocessing data for interpolation in verticalcrosssection charts.ß
|
Tue, 22 Dec 2009 13:18:07 +0000 |
Ingo Weinzierl |
Adjusted sql queries and configuration for verticalcrosssection products. Some code refactoring and improved error handling.
|
Tue, 22 Dec 2009 13:10:56 +0000 |
Ingo Weinzierl |
Added data model classes to store information for interpolation.
|
Tue, 22 Dec 2009 10:34:15 +0000 |
Sascha L. Teichmann |
Load palettes from configuration.
|
Mon, 21 Dec 2009 19:58:17 +0000 |
Sascha L. Teichmann |
Horizontale Schnittprofile. Ignore invalid interpolation correctly.
|
Mon, 21 Dec 2009 18:00:54 +0000 |
Sascha L. Teichmann |
Added support for converting 2D rasters into polygons.
|
Mon, 21 Dec 2009 17:03:10 +0000 |
Ingo Weinzierl |
Moved some methods back to old place.
|
Mon, 21 Dec 2009 16:47:45 +0000 |
Sascha L. Teichmann |
Added Ingo Weinzierl's special JFreeChart classes.
|
Mon, 21 Dec 2009 16:01:35 +0000 |
Ingo Weinzierl |
Prepared state and transitions of verticalcrosssection.
|
Mon, 21 Dec 2009 15:57:04 +0000 |
Ingo Weinzierl |
Outsourcing of some methods for preparing results for chart creation.
|
Mon, 21 Dec 2009 15:28:33 +0000 |
Sascha L. Teichmann |
Added color palettes for several parameters.
|
Mon, 21 Dec 2009 14:41:18 +0000 |
Sascha L. Teichmann |
Horizontales Schnittprofil:
|
Mon, 21 Dec 2009 13:55:42 +0000 |
Ingo Weinzierl |
Removed warning, which told the user that no gap detection is implemented for horizontalcrossprofile charts.
|
Mon, 21 Dec 2009 13:49:49 +0000 |
Ingo Weinzierl |
Added support of gap detection in horizontalcrossprofile charts.
|
Wed, 27 Jan 2010 14:26:30 +0000 |
Hans Plum |
Summarized Changes and NEWS for Release 0.4
|
Wed, 27 Jan 2010 13:26:02 +0000 |
Ingo Weinzierl |
Automatically select entry in multi select boxes if there is only one entry to avoid input failures.
|
Mon, 25 Jan 2010 14:53:38 +0000 |
Ingo Weinzierl |
Refactored xsl sheet for ui's dynamic part: Removed local-name() method, put 'group' items into a table to be well aligned and set the size of multi select boxes to max 5 items or less.
|
Fri, 22 Jan 2010 17:54:55 +0000 |
Ingo Weinzierl |
Add width, height and the boolean value to adjust the visibility of points in charts to the pdf and svg export links.
|
Fri, 22 Jan 2010 16:08:42 +0000 |
Ingo Weinzierl |
Put former parameter into a fieldset with label and removed background image from all fieldsets.
|
Fri, 22 Jan 2010 13:58:30 +0000 |
Ingo Weinzierl |
Added statistic to the actions if available.
|
Fri, 22 Jan 2010 11:28:25 +0000 |
Ingo Weinzierl |
Moved user interface creation to an own action. This makes avoids code duplication and makes it easier to write new action to handle special interactions, because there is no need for parsing the describe document and creating the user interface after this.
|
Fri, 22 Jan 2010 09:49:34 +0000 |
Ingo Weinzierl |
Design improvements: Moved chart option panel and export actions beneath the parameterization panel on the left side. Do not render a useless 'draw' button after reaching the final state.
|
Wed, 20 Jan 2010 14:44:39 +0000 |
Ingo Weinzierl |
Fixed issue149. Render the chart if there are output modes existing for this state - not if there are further states. TODO: We should check if there is an output mode named 'chart' before rendering a chart.
|
Wed, 20 Jan 2010 14:18:32 +0000 |
Ingo Weinzierl |
Added labels for chart option 'draw data points'.
|
Wed, 20 Jan 2010 13:12:49 +0000 |
Ingo Weinzierl |
Adapted static ui to bsh style.
|
Tue, 19 Jan 2010 16:34:28 +0000 |
Ingo Weinzierl |
Disabled step-back functionality.
|
Tue, 19 Jan 2010 14:50:39 +0000 |
Tim Englich |
Added Junit-TestCase for the ExternalCallParser Interface
|
Tue, 19 Jan 2010 14:47:36 +0000 |
Tim Englich |
Added the first Implementation (not complete and not ready to use) for the Interface from the MapViewer to the GNV
|
Mon, 18 Jan 2010 16:21:54 +0000 |
Ingo Weinzierl |
Added a link to jump back to the fis selection.
|
Mon, 18 Jan 2010 13:42:44 +0000 |
Ingo Weinzierl |
Just include a select box for choosing the fis if there is no static part in the describe document.
|
Sun, 17 Jan 2010 21:18:30 +0000 |
Sascha L. Teichmann |
Using a simpler demo WKT polygon in "Horizontalschnitt".
|
Sun, 17 Jan 2010 17:09:21 +0000 |
Sascha L. Teichmann |
Only display chart addons if we really display a chart.
|
Sun, 17 Jan 2010 11:52:17 +0000 |
Sascha L. Teichmann |
Added download links for ZIP files and WMS layers.
|
Fri, 15 Jan 2010 20:22:38 +0000 |
Sascha L. Teichmann |
Cleanup imports
|
Thu, 14 Jan 2010 10:34:39 +0000 |
Ingo Weinzierl |
Fixed a bug which prevented the user to draw charts.
|
Wed, 13 Jan 2010 22:17:02 +0000 |
Ingo Weinzierl |
Render links to step back to previous states into gui. Added controller to advance back to these states.
|
Wed, 13 Jan 2010 11:29:40 +0000 |
Sascha L. Teichmann |
Fixes fake wkt polygon input.
|
Wed, 13 Jan 2010 06:51:52 +0000 |
Sascha L. Teichmann |
Added wkt polygon to test the "Horizontalschnitt"
|
Sat, 09 Jan 2010 17:02:03 +0000 |
Ingo Weinzierl |
Use XMLUtils.ElementCreator to create new nodes in xml documents.
|
Fri, 08 Jan 2010 14:31:19 +0000 |
Tim Englich |
Removed Encodingerrors from listed Files. All Files are now UTF-8 compliant.
|
Wed, 06 Jan 2010 09:13:45 +0000 |
Ingo Weinzierl |
Removed local-name() method from xsl stylesheet and adjusted xpathes while reading xml documents.
|
Tue, 05 Jan 2010 08:52:49 +0000 |
Ingo Weinzierl |
Removed for-each statements and replaced them with templates.
|
Mon, 04 Jan 2010 15:15:38 +0000 |
Ingo Weinzierl |
First step of changing the operation concept. Static nodes will be rendered as text instead of disabled xforms.
|
Fri, 28 Sep 2012 12:13:47 +0200 |
Thomas Arendsen Hein |
merged geo-backend/0.3
0.3
|
Thu, 17 Dec 2009 14:35:02 +0000 |
Sascha L. Teichmann |
Release 0.3
|
Thu, 17 Dec 2009 11:14:45 +0000 |
Ingo Weinzierl |
Fixed a bug in DefaultResult when querying an index out of bounds.
|
Tue, 15 Dec 2009 10:02:24 +0000 |
Tim Englich |
Added Point in Polygon Query Support to ArcSDE-Statement-Processing
|
Fri, 11 Dec 2009 10:45:18 +0000 |
Ingo Weinzierl |
Changed exception handling if a the value of a column, which is not contained in Result, is requested. Will not throw an exception but return null.
|
Fri, 11 Dec 2009 10:34:36 +0000 |
Sascha L. Teichmann |
Removed needless imports
|
Mon, 30 Nov 2009 14:51:09 +0000 |
Tim Englich |
Added missing Methodstubs for Java 1.6 compability.
|
Fri, 27 Nov 2009 13:13:34 +0000 |
Tim Englich |
Revert Changes of the commit of Revision 377 which was unintended
|
Fri, 27 Nov 2009 13:09:48 +0000 |
Tim Englich |
Changed Splitalgorithm of Statements so that it is Possible to add to_date Colums into a Statement
|
Fri, 27 Nov 2009 12:59:04 +0000 |
Tim Englich |
Added RegionFilter-Support to HorizontalProfile InstantaneousPoint
|
Fri, 28 Sep 2012 12:13:47 +0200 |
Thomas Arendsen Hein |
merged gnv-artifacts/0.3
|
Thu, 17 Dec 2009 18:56:03 +0000 |
Sascha L. Teichmann |
Release 0.3
|
Thu, 17 Dec 2009 18:05:23 +0000 |
Sascha L. Teichmann |
Bind REST server to localhost.
|
Thu, 17 Dec 2009 16:57:05 +0000 |
Sascha L. Teichmann |
s/Modeldaten/Modelldaten/
|
Thu, 17 Dec 2009 16:08:37 +0000 |
Sascha L. Teichmann |
Fixed typo
|
Thu, 17 Dec 2009 15:39:20 +0000 |
Sascha L. Teichmann |
Remove wkt line strings from i18n
|