| Mon, 08 Mar 2010 15:39:58 +0000 |
Tim Englich |
Implemented Support of MultiPolygons.
|
| Mon, 08 Mar 2010 14:06:50 +0000 |
Tim Englich |
Added Suport for the Geometrytyp SimpleLine.
|
| Fri, 05 Feb 2010 14:12:25 +0000 |
Ingo Weinzierl |
Changed log4j version to 1.2.14
|
| Fri, 05 Feb 2010 11:59:47 +0000 |
Tim Englich |
Changed from ArcSDE Version 9.2.5 to Version 9.3
|
| Fri, 28 Sep 2012 12:13:53 +0200 |
Thomas Arendsen Hein |
merged gnv-artifacts/0.5
|
| Mon, 08 Mar 2010 15:15:08 +0000 |
Ingo Weinzierl |
Added an offset of five percent between values and chart border in vertical profile charts (issue186).
|
| Mon, 08 Mar 2010 14:04:28 +0000 |
Tim Englich |
Added WMS-Publishing to Product Layer
|
| Mon, 08 Mar 2010 10:51:01 +0000 |
Ingo Weinzierl |
Fixed broken titles in 'Profilschnitt'-charts (issue195).
|
| Mon, 08 Mar 2010 10:04:38 +0000 |
Ingo Weinzierl |
Changed insufficient key to store results used for chart generation in cache (issue189).
|
| Sat, 06 Mar 2010 08:25:14 +0000 |
Sascha L. Teichmann |
Cleanup imports
|
| Fri, 05 Mar 2010 16:07:09 +0000 |
Ingo Weinzierl |
Set ttl of artifacts to a better value in config.
|
| Fri, 05 Mar 2010 14:09:08 +0000 |
Ingo Weinzierl |
Added missing parameter name in describe document (issue185).
|
| Fri, 05 Mar 2010 12:35:24 +0000 |
Tim Englich |
Added Support for writing Shapefiles and Export them as an Zipfile for the Product Layer.
|
| Fri, 05 Mar 2010 09:13:17 +0000 |
Tim Englich |
ISSUE 191: Pdf, svg and png are now available.
|
| Fri, 05 Mar 2010 07:18:52 +0000 |
Ingo Weinzierl |
Added missing class MetaWriter from last commit.
|
| Thu, 04 Mar 2010 16:23:24 +0000 |
Ingo Weinzierl |
Added a configuration section for mapserver relevant stuff. Moved source to write meta files out to an own helper class named MetaWriter.
|
| Thu, 04 Mar 2010 14:06:26 +0000 |
Ingo Weinzierl |
Added some more templates for mapfile generation.
|
| Thu, 04 Mar 2010 09:18:53 +0000 |
Ingo Weinzierl |
Changed the way of calculating the total distance in 'Horizontalprofil'-charts (issue171).
|
| Thu, 04 Mar 2010 08:03:56 +0000 |
Ingo Weinzierl |
Added some more debug information while gap detection.
|
| Wed, 03 Mar 2010 16:26:19 +0000 |
Ingo Weinzierl |
Log important values used for gap detection if debug level is enabled.
|
| Wed, 03 Mar 2010 15:05:12 +0000 |
Ingo Weinzierl |
Removed workaround to send a fake document if statistic is requested for 'Horizontalschnitte' - no statistic available for this product type (issue146).
|
| Wed, 03 Mar 2010 13:44:15 +0000 |
Ingo Weinzierl |
Implementedr histogram pdf export.
|
| Tue, 02 Mar 2010 14:48:32 +0000 |
Ingo Weinzierl |
Implemented SVG export for histograms.
|
| Tue, 02 Mar 2010 08:43:50 +0000 |
Ingo Weinzierl |
Removed CallMeta object from state which should not be serialized. Implemented a little workarround instead to save localized strings for axes descriptions of horizontal profile charts (issue180).
|
| Mon, 01 Mar 2010 16:00:39 +0000 |
Ingo Weinzierl |
Display the selected value if there is no description avaible. WKT-strings will be displayed again (issue182).
|
| Mon, 01 Mar 2010 14:15:33 +0000 |
Ingo Weinzierl |
Take parent states only to describe static user interface part - not the current state itself.
|
| Mon, 01 Mar 2010 13:39:00 +0000 |
Ingo Weinzierl |
Removed useless methods after having refactored the caching mechanism.
|
| Fri, 26 Feb 2010 13:53:05 +0000 |
Ingo Weinzierl |
Improved the describe document so that we are able to render a measurement-parameter-matrix with these data.
|
| Thu, 25 Feb 2010 09:11:56 +0000 |
Ingo Weinzierl |
Adapted product configuration regarding the changes in rev704.
|
| Thu, 25 Feb 2010 09:06:36 +0000 |
Ingo Weinzierl |
'Profilschnitte' are working without cache as well, now.
|
| Thu, 25 Feb 2010 08:23:46 +0000 |
Ingo Weinzierl |
Chart and histogram output are working without using a cache.
|
| Thu, 25 Feb 2010 07:25:21 +0000 |
Ingo Weinzierl |
Changed cache initialization so that we can use GNV without using a cache.
|
| Wed, 24 Feb 2010 14:30:52 +0000 |
Ingo Weinzierl |
Implemented logic to adjust number of bins corresponding to user input.
|
| Tue, 23 Feb 2010 15:50:15 +0000 |
Ingo Weinzierl |
Added XSLT sheet to transform palette xml files into a style definition template used for mapfile generation.
|
| Tue, 23 Feb 2010 15:33:10 +0000 |
Ingo Weinzierl |
Removed a bug in pdf and svg creation.
|
| Tue, 23 Feb 2010 11:47:08 +0000 |
Ingo Weinzierl |
Split up export modes from output modes.
|
| Mon, 22 Feb 2010 11:29:34 +0000 |
Ingo Weinzierl |
Restructured configuration, removed duplicated entry and store config information in MapfileGenerator to avoid reading config file every time while updating mapfile.
|
| Mon, 22 Feb 2010 10:43:25 +0000 |
Ingo Weinzierl |
Improved velocity configuration.
|
| Sun, 21 Feb 2010 21:05:55 +0000 |
Sascha L. Teichmann |
Fixed file handle leak when writing meta data.
|
| Fri, 19 Feb 2010 13:28:34 +0000 |
Ingo Weinzierl |
Implemented method stubs of MapfileGenerator. Mapfiles are successfully created corresponding meta.xml files.
|
| Wed, 17 Feb 2010 09:40:15 +0000 |
Ingo Weinzierl |
Added MapfileGenerator stub and MapfileGenerator calls after writing and removing shapefiles.
|
| Tue, 16 Feb 2010 11:01:59 +0000 |
Sascha L. Teichmann |
Reverted accidental patch.
|
| Tue, 16 Feb 2010 10:58:07 +0000 |
Sascha L. Teichmann |
Created documentation module (language: german)
|
| Mon, 15 Feb 2010 11:58:47 +0000 |
Ingo Weinzierl |
Added histogram as output mode in configuration files.
|
| Mon, 15 Feb 2010 11:44:01 +0000 |
Ingo Weinzierl |
Added new ouput mode: histogram.
|
| Fri, 12 Feb 2010 18:04:58 +0000 |
Tim Englich |
Added the Configuration and the Classes for the new Product Layer.
|
| Fri, 12 Feb 2010 15:36:05 +0000 |
Ingo Weinzierl |
Repaired multi parameter selection.
|
| Fri, 12 Feb 2010 11:16:37 +0000 |
Ingo Weinzierl |
Repaired broken step-back-history.
|
| Fri, 12 Feb 2010 09:17:21 +0000 |
Tim Englich |
Modified first Configuration of a Product that it skip States if a geometry was inserted into the PreSettings.
|
| Fri, 12 Feb 2010 09:11:49 +0000 |
Tim Englich |
Added new Transition and State for using the PreSettingsValue for the decision if a Transition could be used
|
| Thu, 11 Feb 2010 14:10:15 +0000 |
Ingo Weinzierl |
Repaired chart creation.
|
| Thu, 11 Feb 2010 11:58:39 +0000 |
Ingo Weinzierl |
Changed the mechanism for searching for specific parameter collections.
|
| Thu, 11 Feb 2010 08:54:58 +0000 |
Ingo Weinzierl |
Improved hash creation in each state.
|
| Wed, 10 Feb 2010 15:35:26 +0000 |
Ingo Weinzierl |
Added descriptions to the selected input data and use them for rendering the GUI.
|
| Wed, 10 Feb 2010 11:43:35 +0000 |
Ingo Weinzierl |
Parted the cache blob into pieces and changed the way how user input is stored on each state.
|
| Tue, 09 Feb 2010 15:23:07 +0000 |
Tim Englich |
Added the support of the usecase that one FIS can be identified by different MapServices. In that case the parameters will be merged into the existing FIS.
|
| Tue, 09 Feb 2010 14:27:55 +0000 |
Ingo Weinzierl |
First step of removing the cache blob. The static part of the describe document will be created by using the input data stored at each state. Some TODOs left (see ChangeLog).
|
| Tue, 09 Feb 2010 13:01:20 +0000 |
Tim Englich |
Integrated Database-Support for the Mapviewer-Interface
|
| Fri, 05 Feb 2010 14:15:09 +0000 |
Ingo Weinzierl |
Changed log4j version to 1.2.14
|
| Fri, 05 Feb 2010 12:00:04 +0000 |
Tim Englich |
Changed from ArcSDE Version 9.2.5 to Version 9.3
|
| Fri, 05 Feb 2010 10:36:46 +0000 |
Tim Englich |
Changes id_layer of Table layerhasparameter from literal to number.
|
| Fri, 05 Feb 2010 09:58:50 +0000 |
Tim Englich |
ISSUE167
|
| Tue, 02 Feb 2010 13:13:45 +0000 |
Tim Englich |
Added the usage of the Presettings in the States which are handling the choice of Parameter
|
| Tue, 02 Feb 2010 13:12:11 +0000 |
Tim Englich |
Added the possibility to use the data which are send using the MapServer-Interface during the Workflow of the GNV-Artifacts.
|
| Mon, 01 Feb 2010 14:52:05 +0000 |
Tim Englich |
Added the Implementation of the MetaDataService which will deliver FIS and Parameters that match to Mapservices, Region and Layers that were sent to the Service.
|
| Mon, 01 Feb 2010 14:20:11 +0000 |
Tim Englich |
Remove some Structure-Errors from the ChangeLog
|
| Mon, 01 Feb 2010 14:14:19 +0000 |
Tim Englich |
Compilance-Errors triggered by Interface-Modifications in the Artifact-Module.
|
| Mon, 01 Feb 2010 14:03:01 +0000 |
Tim Englich |
Changed Method signatures because of Interfacemodifications in the Artifact-Module
|
| Sun, 31 Jan 2010 21:50:15 +0000 |
Sascha L. Teichmann |
Added experimental support for extrapolation in "Horizontalschnitte"
|
| Fri, 29 Jan 2010 13:28:28 +0000 |
Tim Englich |
Removed accidental checkin of Test-Shapefiles
|
| Fri, 29 Jan 2010 13:19:34 +0000 |
Tim Englich |
Fixed the broken JUnittests.
|
| Mon, 08 Mar 2010 17:09:28 +0000 |
Ingo Weinzierl |
Repaired error message parsing from resulting xml documents after feed() has been called.
|
| Mon, 08 Mar 2010 07:07:44 +0000 |
Ingo Weinzierl |
img-Exports will get a file extension that corresponds to their mime-type (issue187).
|
| Sat, 06 Mar 2010 08:08:16 +0000 |
Sascha L. Teichmann |
Removed duplicated imports.
|
| Fri, 05 Mar 2010 15:50:10 +0000 |
Ingo Weinzierl |
Reset diagram options after switching from chart to histogram or the other way around (issue190).
|
| Fri, 05 Mar 2010 09:58:57 +0000 |
Tim Englich |
ISSUE 181: Removed duplicate Drawaing of the Lengendvalue of Groupelements for choosing different heights for several Parameters
|
| Fri, 05 Mar 2010 09:33:30 +0000 |
Ingo Weinzierl |
Show information about MapServer path and layer name after publishing calculated shapefiles as wms. Use MapServer settings configured in conf.xml to feed OpenLayers client.
|
| Thu, 04 Mar 2010 14:27:26 +0000 |
Ingo Weinzierl |
Adjusted rendering of OpenLayers client.
|
| Tue, 02 Mar 2010 14:55:29 +0000 |
Ingo Weinzierl |
Adjusted http requests and appended a new parameter export mode to 'out'-xml document to choose between svg, pdf or image exports.
|
| Tue, 02 Mar 2010 10:53:30 +0000 |
Ingo Weinzierl |
Implemented a One-Step-Back-History.
|
| Tue, 02 Mar 2010 09:02:31 +0000 |
Ingo Weinzierl |
Display chart when reaching a final state which doesn't need any further user input (issue184).
|
| Mon, 01 Mar 2010 15:52:24 +0000 |
Ingo Weinzierl |
Display an exception if an error occured while stepping back to a former state (issue183).
|
| Mon, 01 Mar 2010 11:08:07 +0000 |
Ingo Weinzierl |
Removed litte copy-paste mistake while setting file-extension for exports.
|
| Mon, 01 Mar 2010 11:05:09 +0000 |
Ingo Weinzierl |
Set file-extension for histogram exports according to mime-type.
|
| Fri, 26 Feb 2010 13:54:47 +0000 |
Ingo Weinzierl |
Render a matrix for measurement selection (measurement-parameter).
|
| Thu, 25 Feb 2010 08:18:41 +0000 |
Ingo Weinzierl |
Fixed issue 178. Export modes CSV and ODV work again.
|
| Wed, 24 Feb 2010 14:38:36 +0000 |
Ingo Weinzierl |
Added checkboxes for selecting the field which is used to adjust the number of bins in histogram charts.
|
| Wed, 24 Feb 2010 08:35:26 +0000 |
Ingo Weinzierl |
Add histogram option parameter to http request for fetching histogram image.
|
| Tue, 23 Feb 2010 17:43:16 +0000 |
Ingo Weinzierl |
Devided actions and exports. Adjusted output and export actions.
|
| Tue, 23 Feb 2010 15:26:50 +0000 |
Ingo Weinzierl |
Sourced JavaScript script tags for loading and rendering an OpenLayers client out to an own jsp page.
|
| Tue, 23 Feb 2010 10:36:02 +0000 |
Ingo Weinzierl |
Added histogram option panel. Show chart/histogram options panel after the user selected chart or histogram. Moved options panel beneath action panel.
|
| Mon, 22 Feb 2010 18:04:55 +0000 |
Ingo Weinzierl |
Render an OpenLayers map with the layer even published after triggering shapefile and mapfile creation.
|
| Mon, 15 Feb 2010 11:42:29 +0000 |
Ingo Weinzierl |
Added action and jsp for rendering histograms.
|
| Fri, 12 Feb 2010 11:16:33 +0000 |
Ingo Weinzierl |
Repaired step-back history.
|
| Fri, 12 Feb 2010 09:58:24 +0000 |
Tim Englich |
Added further XML-Nodes for simulating the MapViewer-Call more detailed.
|
| Fri, 12 Feb 2010 09:55:59 +0000 |
Tim Englich |
Modified the GUI that the Form with the MapViewer-Interface-Request-Body only will be shown using an explicit Action-Call.
|
| Fri, 12 Feb 2010 09:29:54 +0000 |
Tim Englich |
Modified the Create-Artifact-Request-Body that a Geometry will be put into
|
| Tue, 09 Feb 2010 13:16:19 +0000 |
Tim Englich |
Added Sampledata and a sample how to call the MapViewer-Interface using CURL.
|
| Tue, 09 Feb 2010 13:13:41 +0000 |
Tim Englich |
Integrated an Textarea so that is possible to manipulate the XML-Document
|
| Tue, 09 Feb 2010 13:09:45 +0000 |
Tim Englich |
Removed trailing and leading Whitespaces from the Parametervalue which
|
| Tue, 09 Feb 2010 13:05:49 +0000 |
Tim Englich |
Fixed a NPE. Now it is possible to put an Mapservice without an Layer into
|
| Fri, 05 Feb 2010 14:16:03 +0000 |
Ingo Weinzierl |
Changed log4j version to 1.2.14
|
| Tue, 02 Feb 2010 08:22:20 +0000 |
Tim Englich |
Added temporally Possibility to send an MapViewer-Interface-Request using the GUI of the GNV
|
| Mon, 01 Feb 2010 15:08:39 +0000 |
Tim Englich |
Added further business logic for the MapViewer-Interface
|
| Fri, 28 Sep 2012 12:13:50 +0200 |
Thomas Arendsen Hein |
merged geo-backend/0.4
0.4
|
| Wed, 27 Jan 2010 14:50:07 +0000 |
Hans Plum |
Summarized Changes and NEWS for Release 0.4
|
| Tue, 26 Jan 2010 16:33:36 +0000 |
Sascha L. Teichmann |
Fixed gnv/issue107
|
| Tue, 26 Jan 2010 13:55:55 +0000 |
Tim Englich |
Added two Sample-Application demonstrating Bugs in the ArcSDE
|
| Mon, 25 Jan 2010 12:12:31 +0000 |
Sascha L. Teichmann |
Another attempt to fix gnv/issue34. Implemented an internal idle time checking.
|
| Fri, 15 Jan 2010 20:57:13 +0000 |
Sascha L. Teichmann |
Cleanup imports
|
| Fri, 15 Jan 2010 10:09:41 +0000 |
Tim Englich |
Improved the Objectvalidation of the ArcSDE-Databaseconnections
|
| Tue, 12 Jan 2010 00:27:53 +0000 |
Sascha L. Teichmann |
Added bicubic spline interpolation on raster tiles.
|
| Sat, 09 Jan 2010 16:40:19 +0000 |
Sascha L. Teichmann |
Added method to figure out interpolation method for a given string in raster tiles.
|
| Sat, 09 Jan 2010 16:12:10 +0000 |
Sascha L. Teichmann |
Implemented bilinear interpolation on raster tiles.
|
| Sat, 09 Jan 2010 12:41:26 +0000 |
Sascha L. Teichmann |
Fixed access to raster data.
|
| Fri, 08 Jan 2010 14:40:08 +0000 |
Tim Englich |
Removed Encodingerrors from listed Files. All Files are now UTF-8 compliant.
|
| Tue, 05 Jan 2010 15:08:01 +0000 |
Sascha L. Teichmann |
Made RasterObject serializable to be cachable beyond reboot.
|
| Tue, 05 Jan 2010 14:09:53 +0000 |
Tim Englich |
Added RasterObject for caching the Rastertiles to get a better performance
|
| Mon, 04 Jan 2010 15:22:09 +0000 |
Tim Englich |
Added Rasterdatasupport to the ARCSDE-Statement
|
| Sat, 19 Dec 2009 14:45:21 +0000 |
Sascha L. Teichmann |
Small fixes for Ehcache based SQL results caching.
|
| Fri, 18 Dec 2009 16:13:52 +0000 |
Sascha L. Teichmann |
Experimental caching of SQL results via Ehache
|
| Fri, 28 Sep 2012 12:13:49 +0200 |
Thomas Arendsen Hein |
merged gnv-artifacts/0.4
|
| Wed, 27 Jan 2010 15:03:16 +0000 |
Sascha L. Teichmann |
Reordered items in Changes a bit.
|
| Wed, 27 Jan 2010 14:38:27 +0000 |
Hans Plum |
Summarized Changes and NEWS for Release 0.4
|
| Wed, 27 Jan 2010 10:01:37 +0000 |
Ingo Weinzierl |
Solved issue 164 - applied patch of msg 763. Remove directories and shape files of out-dated artifacts.
|
| Tue, 26 Jan 2010 18:32:12 +0000 |
Ingo Weinzierl |
Calculate results and put them into cache when reaching the output state - avoids latencies.
|
| Tue, 26 Jan 2010 17:52:10 +0000 |
Ingo Weinzierl |
Solved issue158. Added labels to 'Profilschnitte'.
|
| Tue, 26 Jan 2010 14:19:59 +0000 |
Ingo Weinzierl |
Set white border for 'Profilschnitte' as default.
|
