Mercurial > dive4elements > river
diff artifacts/doc/conf/meta-data.xml @ 6053:a18aafc1372f
Commit meta-data.xml refactoring
This refactoring was done by Sascha Teichmann and Raimund Renkert,
changes from r5988 until now were manually integrated in this.
The last out change has been left out until it is clear what
the proper solution is for this problem.
| author | Andre Heinecke <aheinecke@intevation.de> |
|---|---|
| date | Tue, 21 May 2013 18:00:29 +0200 |
| parents | 490b12d070a2 |
| children | 5db238b0176e |
line wrap: on
line diff
--- a/artifacts/doc/conf/meta-data.xml Tue May 21 16:39:10 2013 +0200 +++ b/artifacts/doc/conf/meta-data.xml Tue May 21 18:00:29 2013 +0200 @@ -1,3073 +1,2597 @@ <?xml version="1.0" encoding="UTF-8"?> <dc:template xmlns:dc="http://www.intevation.org/2011/Datacage"> -<datacage> - <dc:comment> - Statement to load data from wsts. - </dc:comment> - <dc:macro name="SQL-wst_columns_statement"> - <dc:statement> - SELECT wst_columns.id AS prot_column_id, - wst_columns.name AS prot_column_name, - wst_columns.position AS prot_rel_pos, - wst_columns.description AS info, - wst_ranges.a AS deffrom, - wst_ranges.b AS defto - FROM wst_columns JOIN wst_ranges - ON wst_columns.id = wst_ranges.wst_column_id - WHERE wst_columns.wst_id = ${prot_id} - AND NOT((${tokm} < wst_ranges.a) OR (${fromkm} > wst_ranges.b)) - ORDER by wst_columns.position - </dc:statement> - </dc:macro> + <datacage> - <dc:comment> - Load user specific distance information from artifact. - </dc:comment> - <dc:macro name="user-range"> - <dc:choose> - <dc:when test="dc:contains($parameters, 'user-id')"> - <dc:context connection="user"> + <dc:comment> + User specific part + ------------------ + </dc:comment> + <dc:if test="dc:contains($parameters, 'user-id') and not(dc:contains($artifact-outs, 'floodmap-hws'))"> + <dc:call-macro name="load-user"/> + </dc:if> + + <dc:call-macro name="load-system"/> + + <dc:macro name="load-system"> + <dc:context connection="system"> <dc:statement> - SELECT COALESCE(ld_mode, '') AS ldm, - COALESCE(ld_locations, '') AS ldl, - COALESCE(ld_from, '') AS ldf, - COALESCE(ld_to, '') AS ldt - FROM master_artifacts_range - WHERE gid = CAST(${artifact-id} AS uuid) + SELECT id AS river_id, name AS river_name + FROM rivers + WHERE lower(name) LIKE lower(${river}) </dc:statement> <dc:for-each> - <dc:variable name="fromkm" type="number" expr="dc:fromValue($ldm, $ldl, $ldf)"/> - <dc:variable name="tokm" type="number" expr="dc:toValue($ldm, $ldl, $ldt)"/> - <dc:macro-body/> + <dc:call-macro name="generate-system-content"/> </dc:for-each> - </dc:context> - </dc:when> - <dc:otherwise> - <dc:variable name="fromkm" type="number" expr="dc:fromValue('', '', '')"/> - <dc:variable name="tokm" type="number" expr="dc:toValue('', '', '')"/> - <dc:macro-body/> - </dc:otherwise> - </dc:choose> - </dc:macro> - - <dc:comment> - System part. Load data for the given river. - </dc:comment> - <dc:macro name="load-system"> - <dc:context connection="system"> - <dc:statement> - SELECT id AS river_id, name AS river_name FROM rivers - WHERE lower(name) LIKE lower(${river}) - </dc:statement> - <dc:for-each> - - <dc:comment> - Base-data macros (mostly data imported from wst-files). - </dc:comment> - <dc:macro name="basedata_0"> - <dc:call-macro name="user-range"> - <dc:comment comment=" BASEDATA ---------------------------"/> - <basedata> - <dc:context connection="system"> - <dc:statement> - SELECT id AS prot_id, - description AS prot_description - FROM wsts WHERE kind = 0 AND river_id = ${river_id} - </dc:statement> - <dc:for-each> - <basedata name="{$prot_description}"> - <dc:context> - <dc:call-macro name="SQL-wst_columns_statement"/> - <dc:for-each> - <column name="{$prot_column_name}" - ids="base_data-wstv-{$prot_rel_pos}-{$prot_id}" - factory="staticwqkms" out="{$OUT}" - info="{$info} [km {$deffrom} - {$defto}]"/> - </dc:for-each> - </dc:context> - </basedata> - </dc:for-each> - </dc:context> - </basedata> - </dc:call-macro> - </dc:macro> - - <dc:macro name="basedata_0_wq"> - <dc:call-macro name="user-range"> - <dc:comment comment=" BASEDATA ---------------------------"/> - <basedata> - <dc:context connection="system"> - <dc:statement> - SELECT id AS prot_id, - description AS prot_description - FROM wsts WHERE kind = 0 AND river_id = ${river_id} - </dc:statement> - <dc:for-each> - <basedata name="{$prot_description}"> - <dc:context> - <dc:call-macro name="SQL-wst_columns_statement"/> - <dc:for-each> - <column name="{$prot_column_name}" - ids="base_data-wstv-{$prot_rel_pos}-{$prot_id}" - factory="wqinterpol" out="{$OUT}" - info="{$info} [km {$deffrom} - {$defto}]"/> - </dc:for-each> - </dc:context> - </basedata> - </dc:for-each> - </dc:context> - </basedata> - </dc:call-macro> - </dc:macro> - - <dc:macro name="basedata_1_additionals_marks"> - <dc:call-macro name="user-range"> - <dc:comment comment=".ZUS -------------------------------"/> - <additionals> - <dc:context connection="system"> - <dc:statement> - SELECT id AS prot_id, - description AS prot_description - FROM wsts WHERE kind = 1 AND river_id = ${river_id} - </dc:statement> - <dc:for-each> - <additional name="{$prot_description}"> - <dc:context> - <dc:call-macro name="SQL-wst_columns_statement"/> - <dc:for-each> - <column name="{$prot_column_name}" - ids="additionalsmarks-wstv-{$prot_rel_pos}-{$prot_id}" - factory="staticwkms" out="{$OUT}" - info="{$info} [km {$deffrom} - {$defto}]"/> - </dc:for-each> - </dc:context></additional> - </dc:for-each> - </dc:context> - </additionals> - </dc:call-macro> - </dc:macro> - - <dc:macro name="basedata_1_additionals"> - <dc:call-macro name="user-range"> - <dc:comment comment=".ZUS -------------------------------"/> - <additionals> - <dc:context connection="system"> - <dc:statement> - SELECT id AS prot_id, - description AS prot_description - FROM wsts WHERE kind = 1 AND river_id = ${river_id} - </dc:statement> - <dc:for-each> - <additional name="{dc:replace($prot_description, 'Zus.Längsschnitte/', '')}"> - <dc:context> - <dc:call-macro name="SQL-wst_columns_statement"/> - <dc:for-each> - <column name="{$prot_column_name}" - ids="additionals-wstv-{$prot_rel_pos}-{$prot_id}" - factory="staticwqkms" out="{$OUT}" - info="{$info} [km {$deffrom} - {$defto}]"/> - </dc:for-each> - </dc:context> - </additional> - </dc:for-each> - </dc:context> - </additionals> - </dc:call-macro> - </dc:macro> - - <dc:macro name="basedata_1_additionals-relative_point"> - <dc:call-macro name="user-range"> - <dc:comment comment=".ZUS -------------------------------"/> - <additionals> - <dc:context connection="system"> - <dc:statement> - SELECT id AS prot_id, - description AS prot_description - FROM wsts WHERE kind = 1 AND river_id = ${river_id} - </dc:statement> - <dc:for-each> - <relativepoint name="{$prot_description}"> - <dc:context> - <dc:call-macro name="SQL-wst_columns_statement"/> - <dc:for-each> - <column name="{$prot_column_name}" - ids="additionals-wstv-{$prot_rel_pos}-{$prot_id}" - factory="staticwkms" out="{$OUT}" - info="{$info} [km {$deffrom} - {$defto}]"/> - </dc:for-each> - </dc:context> - </relativepoint> - </dc:for-each> - </dc:context> - </additionals> - </dc:call-macro> - </dc:macro> - - <dc:macro name="basedata_2_fixations_wqkms"> - <dc:call-macro name="user-range"> - <fixations> - <dc:context connection="system"> - <dc:statement> - SELECT id AS prot_id, - description AS prot_description - FROM wsts WHERE kind = 2 AND river_id = ${river_id} - ORDER BY prot_description - </dc:statement> - <dc:for-each> - <fixation name="{dc:replace($prot_description, 'Fixierungen/', '')}"> - <dc:context> - <dc:call-macro name="SQL-wst_columns_statement"/> - <dc:for-each> - <column name="{$prot_column_name}" - ids="fixations-wstv-{$prot_rel_pos}-{$prot_id}" - factory="wqinterpol" out="{$OUT}" - info="{$info} [km {$deffrom} - {$defto}]"/> - </dc:for-each> - </dc:context> - </fixation> - </dc:for-each> - </dc:context> - </fixations> - </dc:call-macro> - </dc:macro> - - <dc:macro name="basedata_2_fixations"> - <dc:call-macro name="user-range"> - <fixations> - <dc:context connection="system"> - <dc:statement> - SELECT id AS prot_id, - description AS prot_description - FROM wsts WHERE kind = 2 AND river_id = ${river_id} - ORDER BY prot_description - </dc:statement> - <dc:for-each> - <fixation name="{dc:replace($prot_description, 'Fixierungen/', '')}"> - <dc:context> - <dc:call-macro name="SQL-wst_columns_statement"/> - <dc:for-each> - <column name="{$prot_column_name}" - ids="fixations-wstv-{$prot_rel_pos}-{$prot_id}" - factory="staticwqkms" out="{$OUT}" - info="{$info} [km {$deffrom} - {$defto}]"/> - </dc:for-each> - </dc:context> - </fixation> - </dc:for-each> - </dc:context> - </fixations> - </dc:call-macro> - </dc:macro> - - <dc:macro name="basedata_2_fixations_relative_point"> - <dc:call-macro name="user-range"> - <fixations> - <dc:context connection="system"> - <dc:statement> - SELECT id AS prot_id, - description AS prot_description - FROM wsts WHERE kind = 2 AND river_id = ${river_id} - ORDER BY prot_description - </dc:statement> - <dc:for-each> - <relativepoint name="{dc:replace($prot_description, 'Fixierungen/', '')}"> - <dc:context> - <dc:call-macro name="SQL-wst_columns_statement"/> - <dc:for-each> - <column name="{$prot_column_name}" - ids="fixations-wstv-{$prot_rel_pos}-{$prot_id}" - factory="staticwkms" out="{$OUT}" - info="{$info} [km {$deffrom} - {$defto}]"/> - </dc:for-each> - </dc:context> - </relativepoint> - </dc:for-each> - </dc:context> - </fixations> - </dc:call-macro> - </dc:macro> - - <dc:macro name="basedata_3_officials"> - <dc:call-macro name="user-range"> - <dc:comment comment=".wst -------------------------------"/> - <officiallines> - <dc:context connection="system"> - <dc:statement> - SELECT id AS prot_id, - description AS prot_description - FROM wsts WHERE kind = 3 AND river_id = ${river_id} - </dc:statement> - <dc:for-each> - <official name="{$prot_description}"> - <dc:context> - <dc:call-macro name="SQL-wst_columns_statement"/> - <dc:for-each> - <column name="{$prot_column_name}" - ids="additionals-wstv-{$prot_rel_pos}-{$prot_id}" - factory="staticwqkms" out="{$OUT}" - info="{$info} [km {$deffrom} - {$defto}]"/> - </dc:for-each> - </dc:context> - </official> - </dc:for-each> - </dc:context> - </officiallines> - </dc:call-macro> - </dc:macro> + </dc:context> + </dc:macro> - <dc:macro name="basedata_4_heightmarks-points-relative_points"> - <dc:call-macro name="user-range"> - <heightmarks> - <dc:context connection="system"> - <dc:statement> - SELECT id AS prot_id, - description AS prot_description - FROM wsts WHERE kind = 4 AND river_id = ${river_id} - </dc:statement> - <dc:for-each> - <relativepoint name="{$prot_description}"> - <dc:context> - <dc:call-macro name="SQL-wst_columns_statement"/> - <dc:for-each> - <column name="{$prot_column_name}" - ids="heightmarks_points-wstv-{$prot_rel_pos}-{$prot_id}" - factory="staticwkms" out="{$OUT}" - info="{$info} [km {$deffrom} - {$defto}]"/> - </dc:for-each> - </dc:context> - </relativepoint> - </dc:for-each> - </dc:context> - </heightmarks> - </dc:call-macro> - </dc:macro> - - <dc:macro name="basedata_4_heightmarks-points"> - <dc:call-macro name="user-range"> - <heightmarks> - <dc:context connection="system"> - <dc:statement> - SELECT id AS prot_id, - description AS prot_description - FROM wsts WHERE kind = 4 AND river_id = ${river_id} - </dc:statement> - <dc:for-each> - <heightmark name="{dc:replace($prot_description, 'HW-Marken/', '')}"> - <dc:context> - <dc:call-macro name="SQL-wst_columns_statement"/> - <dc:for-each> - <column name="{$prot_column_name}" - ids="heightmarks_points-wstv-{$prot_rel_pos}-{$prot_id}" - factory="staticwkms" out="{$OUT}" - info="{$info} [km {$deffrom} - {$defto}]"/> - </dc:for-each> - </dc:context> - </heightmark> - </dc:for-each> - </dc:context> - </heightmarks> - </dc:call-macro> - </dc:macro> - - <dc:macro name="basedata_5_flood-protections_relative_points"> - <dc:call-macro name="user-range"> - <flood_protections id="flood-protections-{$river_id}"> - <dc:context connection="system"> - <dc:statement> - SELECT id AS prot_id, - description AS prot_description - FROM wsts WHERE kind = 5 AND river_id = ${river_id} - </dc:statement> - <dc:for-each> - <relativepoint name="{$prot_description}" - db-id="{$prot_id}" - factory="staticwkms" out="{$OUT}"> - <columns> - <dc:context> - <dc:call-macro name="SQL-wst_columns_statement"/> - <dc:for-each> - <column name="{$prot_column_name}" - ids="flood_protection-wstv-{$prot_rel_pos}-{$prot_id}" - factory="staticwkms" out="{$OUT}" - info="{$info} [km {$deffrom} - {$defto}]"/> - </dc:for-each> - </dc:context> - </columns> - </relativepoint> - </dc:for-each> - </dc:context></flood_protections> - </dc:call-macro> - </dc:macro> - - <dc:macro name="basedata_5_flood-protections"> - <dc:call-macro name="user-range"> - <flood_protections id="flood-protections-{$river_id}"> - <dc:context connection="system"> - <dc:statement> - SELECT id AS prot_id, - description AS prot_description - FROM wsts WHERE kind = 5 AND river_id = ${river_id} - </dc:statement> - <dc:for-each> - <flood_protection name="{dc:replace($prot_description, 'HW-Schutzanlagen/', '')}" - db-id="{$prot_id}" - factory="staticwkms" out="{$OUT}"> - <dc:context> - <dc:call-macro name="SQL-wst_columns_statement"/> - <dc:for-each> - <column name="{$prot_column_name}" - ids="flood_protection-wstv-{$prot_rel_pos}-{$prot_id}" - factory="staticwkms" out="{$OUT}" - info="{$info} [km {$deffrom} - {$defto}]"/> - </dc:for-each> - </dc:context> - </flood_protection> - </dc:for-each> - </dc:context> - </flood_protections> - </dc:call-macro> - </dc:macro> - - <dc:macro name="mainvalues"> - <wmainvalue factory="mainvalue" out="{$OUT}" ids="{$river_id}:w"/> - <qmainvalue factory="mainvalue" out="{$OUT}" ids="{$river_id}:q"/> - </dc:macro> - - <dc:macro name="qsectors"> - <qsector factory="qsectors" out="{$OUT}" ids="{$river_id}"/> - </dc:macro> - - <dc:macro name="annotations"> - <annotation factory="annotations" out="{$OUT}" ids="{$river_id}"/> - </dc:macro> - - <dc:macro name="annotations_per_type"> - <annotations> - <dc:context> - <all_annotations factory="annotations" out="{$OUT}" ids="{$river_id}"/> - <dc:statement> - SELECT id AS anno_id, - name AS anno_description - FROM annotation_types - </dc:statement> - <dc:for-each> - <annotation name="{$anno_description}" - factory="annotations" out="{$OUT}" - ids="{$river_id}:{$anno_description}"/> - </dc:for-each> - </dc:context> - </annotations> - </dc:macro> + <dc:macro name="load-user"> + <old_calculations> + <dc:call-macro name="generate-user-content"/> + </old_calculations> + </dc:macro> - <dc:macro name="cross_sections"> - <dc:call-macro name="user-range"> - <cross_sections id="flood-protections-{$river_id}"> - <dc:context connection="system"> - <dc:statement> - SELECT DISTINCT - cs.id AS prot_id, - cs.description AS prot_description - FROM cross_sections cs - JOIN cross_section_lines csl ON csl.cross_section_id = cs.id - WHERE cs.river_id = ${river_id} - AND csl.km BETWEEN ${fromkm} AND ${tokm} - </dc:statement> - <dc:for-each> - <cross_section name="{$prot_description}" - ids="{$prot_id}" - factory="crosssections" out="{$OUT}"/> - </dc:for-each> - </dc:context> - </cross_sections> - </dc:call-macro> - </dc:macro> - - <dc:macro name="hyks"> - <dc:call-macro name="user-range"> - <hyks id="hyk-{$river_id}"> - <dc:context connection="system"> - <dc:statement> - SELECT DISTINCT - h.id AS hyk_id, - h.description AS hyk_description - FROM hyks h - JOIN hyk_entries he ON he.hyk_id = h.id - WHERE river_id = ${river_id} - AND he.km BETWEEN ${fromkm} AND ${tokm} - </dc:statement> - <dc:for-each> - <hyk name="{$hyk_description}" - ids="{$hyk_id}" - factory="hyk" out="{$OUT}"/> - </dc:for-each> - </dc:context></hyks> - </dc:call-macro> - </dc:macro> - - <dc:macro name="flow_velocity_measurements"> - <dc:call-macro name="user-range"> - <flowvelocitymeasurement> - <dc:context connection="system"> - <dc:statement> - SELECT id AS fvmid, - description AS fvmd - FROM flow_velocity_measurements WHERE river_id = ${river_id} - </dc:statement> - <dc:for-each> - <flow_velocity_measurement name="{$fvmd}" - ids="{$fvmid}" - factory="flowvelocity" out="{$OUT}"> - <dc:context> - <dc:statement> - SELECT id, description, station, datetime, v, w, q - FROM flow_velocity_measure_values - WHERE measurements_id = ${fvmid} - AND station BETWEEN ${fromkm} AND ${tokm} - </dc:statement> - <dc:for-each> - <measurement_value name="{$description} - {$station} - {$datetime}" - ids="{$id}" - factory="flowvelocity" out="{$OUT}"/> - </dc:for-each> - </dc:context> - </flow_velocity_measurement> - </dc:for-each> - </dc:context> - </flowvelocitymeasurement> - </dc:call-macro> - </dc:macro> + <dc:macro name="generate-system-content"> + <dc:call-macro name="user-range"> + <dc:call-macro name="km-filtered-wsts"> + <dc:choose> + <dc:when test="dc:contains($parameters, 'recommended')"> + <dc:comment> + Recommendations (client shall load immediately). + </dc:comment> + <dc:iterate var="out" container="artifact-outs"> + <dc:choose> + <dc:when test="$out = 'w_differences'"> + <dc:call-macro name="annotations"/> + </dc:when> + <dc:when test="$out = 'discharge_longitudinal_section'"> + <dc:call-macro name="annotations"/> + </dc:when> + <dc:when test="$out = 'historical_discharge_wq'"> + <dc:call-macro name="mainvalues"/> + </dc:when> + <dc:when test="$out = 'cross_section'"> + <dc:call-macro name="cross_sections"/> + <dc:call-macro name="hyks"/> + </dc:when> + <dc:when test="$out = 'discharge_curve'"> + <dc:call-macro name="mainvalues"/> + </dc:when> + <dc:when test="$out = 'computed_discharge_curve'"> + <dc:call-macro name="mainvalues"/> + <dc:call-macro name="basedata_2_fixations_wqkms"/> + </dc:when> + <dc:when test="$out = 'duration_curve'"> + <dc:call-macro name="mainvalues"/> + </dc:when> + <dc:when test="$out = 'reference_curve'"> + <dc:call-macro name="annotations"/> + <dc:call-macro name="mainvalues"/> + </dc:when> + <dc:when test="$out = 'fix_wq_curve'"> + <dc:call-macro name="mainvalues"/> + <dc:call-macro name="qsectors"/> + </dc:when> + <dc:when test="$out = 'longitudinal_section'"> + <dc:call-macro name="annotations"/> + </dc:when> + <dc:when test="$out = 'fix_longitudinal_section_curve'"> + <dc:call-macro name="annotations"/> + </dc:when> + <dc:when test="$out = 'bed_difference_epoch'"> + <dc:call-macro name="annotations"/> + </dc:when> + <dc:when test="$out = 'bed_difference_year'"> + <dc:call-macro name="annotations"/> + </dc:when> + <dc:when test="$out = 'bed_difference_height_year'"> + <dc:call-macro name="annotations"/> + </dc:when> + <dc:when test="$out = 'floodmap'"> + <dc:call-macro name="flood-map-recommended"/> + </dc:when> + <dc:when test="$out = 'floodmap-hws'"> + <dc:call-macro name="flood-map-recommended"/> + </dc:when> + <dc:when test="$out = 'minfo-heights'"> + <dc:call-macro name="minfo-heights"/> + </dc:when> + <dc:when test="$out = 'minfo-heights-epoch'"> + <bedheights> + <dc:call-macro name="bed-heights-epoch"/> + </bedheights> + </dc:when> + </dc:choose> + </dc:iterate> + </dc:when> + <dc:otherwise> + <dc:comment> + Non - Recommendations. + </dc:comment> + <dc:iterate var="out" container="artifact-outs"> + <dc:choose> + <dc:when test="$out = 'cross_section'"> + <dc:call-macro name="basedata_0"/> + <dc:call-macro name="basedata_1_additionals"/> + <dc:call-macro name="basedata_2_fixations"/> + <dc:call-macro name="basedata_3_officials"/> + <dc:call-macro name="basedata_4_heightmarks-points"/> + <dc:call-macro name="cross_sections"/> + <dc:call-macro name="hyks"/> + </dc:when> + <dc:when test="$out = 'longitudinal_section'"> + <dc:call-macro name="longitudinal-section-prototype"/> + </dc:when> + <dc:when test="$out = 'w_differences'"> + <dc:call-macro name="longitudinal-section-prototype"/> + </dc:when> + <dc:when test="$out = 'discharge_longitudinal_section'"> + <dc:call-macro name="longitudinal-section-prototype"/> + </dc:when> + <dc:when test="$out = 'discharge_curve'"> + <dc:call-macro name="mainvalues"/> + </dc:when> + <dc:when test="$out = 'duration_curve'"> + <dc:call-macro name="mainvalues"/> + <dc:call-macro name="basedata_2_fixations_relative_point"/> + <dc:call-macro name="basedata_4_heightmarks-points-relative_points"/> + <dc:call-macro name="basedata_5_flood-protections_relative_points"/> + </dc:when> + <dc:when test="$out = 'reference_curve'"> + <dc:call-macro name="mainvalues"/> + <dc:call-macro name="annotations"/> + <dc:call-macro name="basedata_1_additionals-relative_point"/> + <dc:call-macro name="basedata_2_fixations_relative_point"/> + <dc:call-macro name="basedata_4_heightmarks-points-relative_points"/> + <dc:call-macro name="basedata_5_flood-protections_relative_points"/> + </dc:when> + <dc:when test="$out = 'fix_wq_curve'"> + <dc:call-macro name="basedata_0_wq"/> + <dc:call-macro name="basedata_1_additionals_marks"/> + <dc:call-macro name="basedata_2_fixations_wqkms"/> + <dc:call-macro name="basedata_3_officials"/> + <dc:call-macro name="basedata_4_heightmarks-points"/> + <dc:call-macro name="basedata_5_flood-protections_relative_points"/> + <dc:call-macro name="discharge_table_gauge"/> + <dc:call-macro name="discharge_fix_wq"/> + </dc:when> + <dc:when test="$out = 'fix_longitudinal_section_curve'"> + <dc:call-macro name="annotations"/> + </dc:when> + <dc:when test="$out = 'map'"> + <dc:call-macro name="flood-map-complete"/> + </dc:when> + <dc:when test="$out = 'flow_velocity'"> + <dc:call-macro name="annotations_per_type"/> + <dc:call-macro name="flow_velocity_measurements"/> + </dc:when> + <dc:when test="$out = 'bed_longitudinal_section'"> + <dc:call-macro name="annotations_per_type"/> + </dc:when> + <dc:when test="$out = 'sedimentload_ls'"> + <dc:call-macro name="annotations_per_type"/> + <dc:call-macro name="morph_width"/> + </dc:when> + <dc:when test="$out = 'bedheight_middle'"> + <dc:call-macro name="sounding-width"/> + <dc:call-macro name="basedata_0"/> + <dc:call-macro name="basedata_1_additionals"/> + <dc:call-macro name="basedata_2_fixations"/> + <dc:call-macro name="basedata_3_officials"/> + <dc:call-macro name="annotations_per_type"/> + </dc:when> + <dc:when test="$out = 'bed_difference_year'"> + <dc:call-macro name="basedata_0"/> + <dc:call-macro name="basedata_1_additionals"/> + <dc:call-macro name="basedata_2_fixations"/> + <dc:call-macro name="basedata_3_officials"/> + <dc:call-macro name="annotations_per_type"/> + <dc:call-macro name="morph_width"/> + </dc:when> + <dc:when test="$out = 'bed_difference_epoch'"> + <dc:call-macro name="basedata_0"/> + <dc:call-macro name="basedata_1_additionals"/> + <dc:call-macro name="basedata_2_fixations"/> + <dc:call-macro name="basedata_3_officials"/> + <dc:call-macro name="annotations_per_type"/> + <dc:call-macro name="morph_width"/> + </dc:when> + <dc:when test="$out = 'floodmap'"> + <dc:choose> + <dc:when test="dc:contains($parameters, 'dem')"> + <dc:call-macro name="flood-map-dem"/> + </dc:when> + <dc:when test="dc:contains($parameters, 'hws')"> + <hws> + <dc:call-macro name="flood-map-hws-lines"/> + <dc:call-macro name="flood-map-hws-points"/> + </hws> + </dc:when> + <dc:otherwise> + <dc:call-macro name="flood-map-complete"/> + </dc:otherwise> + </dc:choose> + </dc:when> + <dc:when test="$out = 'floodmap-hws'"> + <dc:choose> + <dc:when test="dc:contains($parameters, 'dem')"> + <dc:call-macro name="flood-map-dem"/> + </dc:when> + <dc:when test="dc:contains($parameters, 'hws')"> + <hws> + <dc:call-macro name="flood-map-hws-lines"/> + <dc:call-macro name="flood-map-hws-points"/> + </hws> + </dc:when> + <dc:otherwise> + <dc:call-macro name="flood-map-complete"/> + </dc:otherwise> + </dc:choose> + </dc:when> + <dc:when test="$out = 'computed_discharge_curve'"> + <dc:call-macro name="discharge_computed"/> + <dc:call-macro name="basedata_2_fixations_wqkms"/> + <dc:call-macro name="basedata_5_flood-protections"/> + <dc:call-macro name="basedata_0"/> + <dc:call-macro name="basedata_1_additionals"/> + <dc:call-macro name="basedata_4_heightmarks-points"/> + <computed_discharge_curve> + <dc:call-macro name="mainvalues"/> + </computed_discharge_curve> + </dc:when> + <dc:when test="$out = 'minfo-heights'"> + <dc:call-macro name="minfo-heights"/> + <dc:macro name="minfo-heights"> + <bedheights> + <dc:call-macro name="bed-heights-single"/> + <dc:call-macro name="bed-heights-epoch"/> + </bedheights> + </dc:macro> + </dc:when> + <dc:when test="$out = 'minfo-heights-epoch'"> + <bedheights> + <dc:call-macro name="bed-heights-epoch"/> + </bedheights> + </dc:when> + </dc:choose> + </dc:iterate> + </dc:otherwise> + </dc:choose> + </dc:call-macro> + </dc:call-macro> + </dc:macro> - <dc:macro name="sounding-width"> - <soundings_width> - <dc:context> - <dc:statement> - SELECT id AS bedh_id, - year AS bedh_year, - description AS bedh_descr - FROM bed_height_single WHERE river_id = ${river_id} - </dc:statement> - <dc:for-each> - <height factory="bedheight" out="{$OUT}" - ids="bedheight-singlevalues-{$bedh_id}-{$bedh_year}" - description="{$bedh_descr}"/> - </dc:for-each> - </dc:context> - </soundings_width> - </dc:macro> + <dc:macro name="generate-user-content"> + <dc:call-macro name="km-filtered-userdata"> + <dc:iterate var="out" container="artifact-outs"> + <dc:choose> + <dc:when test="$out = 'longitudinal_section'"> + <dc:call-macro name="longitudinal"/> + <dc:call-macro name="differences"/> + <dc:call-macro name="officiallines_user"/> + </dc:when> + <dc:when test="$out = 'discharge_longitudinal_section'"> + <dc:call-macro name="longitudinal"/> + <dc:call-macro name="differences"/> + </dc:when> + <dc:when test="$out = 'w_differences'"> + <dc:call-macro name="longitudinal"/> + <dc:call-macro name="differences"/> + </dc:when> + <dc:when test="$out = 'fix_deltawt_curve'"> + <dc:call-macro name="delta-wt"/> + </dc:when> + <dc:when test="$out = 'reference_curve'"> + <dc:call-macro name="reference-curves"/> + </dc:when> + <dc:when test="$out = 'computed_discharge_curve'"> + <dc:call-macro name="computed-discharge-curve"/> + </dc:when> + <dc:when test="$out = 'cross_section'"> + <dc:call-macro name="waterlevels"/> + </dc:when> + <dc:when test="$out = 'fix_longitudinal_section_curve'"> + <dc:call-macro name="longitudinal-section"/> + </dc:when> + <dc:when test="$out = 'fix_derivate_curve'"> + <dc:call-macro name="fix-derivate-curve"/> + </dc:when> + <dc:when test="$out = 'fix_wq_curve'"> + <dc:call-macro name="fix-wq-curve"/> + </dc:when> + <dc:when test="$out = 'duration_curve'"> + <dc:call-macro name="duration-curve"/> + </dc:when> + <dc:when test="$out = 'waterlevels'"> + <dc:call-macro name="basedata_0"/> + <dc:call-macro name="basedata_1_additionals"/> + <dc:call-macro name="basedata_2_fixations"/> + <dc:call-macro name="basedata_4_heightmarks-points"/> + <dc:call-macro name="basedata_5_flood-protections"/> + <dc:call-macro name="waterlevels-fix"/> + </dc:when> + <dc:when test="$out = 'fix_wq_curve'"> + <dc:call-macro name="waterlevels-fix"/> + </dc:when> + <dc:when test="$out = 'floodmap'"> + <dc:call-macro name="flood-map"/> + </dc:when> + <dc:when test="$out = 'map'"> + <dc:call-macro name="flood-map"/> + </dc:when> + <dc:when test="$out = 'bedheight_middle'"> + <dc:call-macro name="waterlevels-discharge"/> + <dc:call-macro name="waterlevels-fix"/> + </dc:when> + <dc:when test="$out = 'floodmap-hws'"> + <dc:call-macro name="floodmap-hws-user"/> + </dc:when> + <dc:when test="$out = 'flow_velocity'"> + <dc:call-macro name="bedquality-bed"/> + <dc:call-macro name="bedquality-load"/> + </dc:when> + <dc:when test="$out = 'bed_longitudinal_section'"> + <dc:call-macro name="bedquality-bed"/> + <dc:call-macro name="bedquality-load"/> + <dc:call-macro name="bedquality-density"/> + <dc:call-macro name="bedquality-porosity"/> + </dc:when> + <dc:when test="$out = 'sedimentload_ls'"> + <dc:call-macro name="differences"/> + <dc:call-macro name="bedheight-differences"/> + <dc:call-macro name="flow-velocity"/> + <dc:call-macro name="sediment-load"/> + </dc:when> + <dc:when test="$out = 'bed_difference_year'"> + <dc:call-macro name="waterlevels-discharge"/> + <dc:call-macro name="bedheight-differences"/> + <dc:call-macro name="differences"/> + <dc:call-macro name="waterlevels-fix"/> + <dc:call-macro name="delta-wt-ls"/> + </dc:when> + <dc:when test="$out = 'bed_difference_epoch'"> + <dc:call-macro name="waterlevels-discharge"/> + <dc:call-macro name="bedheight-differences"/> + <dc:call-macro name="differences"/> + <dc:call-macro name="waterlevels-fix"/> + <dc:call-macro name="delta-wt-ls"/> + </dc:when> + </dc:choose> + </dc:iterate> + </dc:call-macro> + </dc:macro> - <dc:macro name="morph_width"> - <morph_width> - <dc:context> - <dc:statement> - SELECT id AS width_id - FROM morphologic_width - WHERE river_id = ${river_id} - </dc:statement> - <dc:for-each> - <dc:context> - <dc:statement> - SELECT min(station) AS from_station, - max(station) AS to_station - FROM morphologic_width_values - WHERE morphologic_width_id = ${width_id} - </dc:statement> - <dc:for-each> - <morphologic-width name="{$from_station} - {$to_station}" - ids="{$width_id}" - factory="morph-width"/> - </dc:for-each> - </dc:context> - </dc:for-each> - </dc:context> - </morph_width> - </dc:macro> + <!-- Macros to load user data --> - <dc:macro name="longitudinal-section-prototype"> - <dc:call-macro name="basedata_0"/> - <dc:call-macro name="basedata_1_additionals"/> - <dc:comment comment=" FIXATIONS ---------------------------"/> - <dc:call-macro name="basedata_2_fixations"/> - <dc:comment comment=" HOEHENMARKEN ---------------------------"/> - <dc:call-macro name="basedata_4_heightmarks-points"/> - <dc:comment comment=" AMTL LINIEN ---------------------------"/> - <dc:call-macro name="basedata_3_officials"/> - <dc:call-macro name="basedata_5_flood-protections"/> - <dc:call-macro name="annotations_per_type"/> - </dc:macro> + <dc:macro name="select-facets"> + <dc:context> + <dc:statement> + SELECT a.gid AS aid, + f.id AS fid, + f.name AS facet_name, + f.num AS facet_num, + f.description AS facet_description + FROM artifacts a + JOIN outs o ON o.artifact_id = a.id + JOIN facets f ON f.out_id = o.id + WHERE a.id = ${a_id} + AND f.name = ${facet_type} + </dc:statement> + <dc:if test="dc:has-result()"> + <dc:macro-body/> + </dc:if> + </dc:context> + </dc:macro> - <dc:macro name="discharge_table_gauge"> - <discharge_table_nn> - <discharge_table_gauge> - <dc:context> - <dc:statement> - SELECT id AS gauge_id, - name AS gauge_name - FROM gauges WHERE river_id = ${river_id} - </dc:statement> - <dc:for-each> - <gauge name="{$gauge_name}" - db-id="{$gauge_id}" - factory="gaugedischarge" out="{$OUT}" - from="{$g_start}" - to="{$g_stop}" - ids="{$gauge_name}"/> - </dc:for-each> - </dc:context> - </discharge_table_gauge> - </discharge_table_nn> - </dc:macro> + <dc:macro name="differences"> + <dc:variable name="facet_type" value="w_differences"/> + <dc:call-macro name="select-facets"> + <differences> + <dc:for-each> + <w_differences + description="{$facet_description}" + factory="winfo" + artifact-id="{$aid}" + ids="{$aid}" + out="w_differences"/> + </dc:for-each> + </differences> + </dc:call-macro> + </dc:macro> - <dc:macro name="discharge_computed"> - <discharge_table_nn> - <discharge_table_gauge> + <dc:macro name="reference-curves"> + <dc:variable name="facet_type" value="reference_curve"/> + <dc:call-macro name="select-facets"> + <reference_curves> + <dc:for-each> + <dc:element name="${facet_name}"> + <dc:attribute name="description" value="${facet_description}"/> + <dc:attribute name="factory" value="winfo"/> + <dc:attribute name="artifact-id" value="${aid}"/> + <dc:attribute name="ids" value="${aid}"/> + <dc:attribute name="out" value="reference_curve"/> + </dc:element> + </dc:for-each> + </reference_curves> + </dc:call-macro> + </dc:macro> + + <dc:macro name="computed-discharge-curve"> + <dc:variable name="facet_type" value="computed_discharge_curve.q"/> + <dc:call-macro name="select-facets"> + <computed_discharge_curves> + <dc:for-each> + <dc:element name="${facet_name}"> + <dc:attribute name="description" value="${facet_description}"/> + <dc:attribute name="factory" value="winfo"/> + <dc:attribute name="artifact-id" value="${aid}"/> + <dc:attribute name="ids" value="${aid}"/> + <dc:attribute name="out" value="computed_discharge_curve"/> + </dc:element> + </dc:for-each> + </computed_discharge_curves> + </dc:call-macro> + </dc:macro> + + <dc:macro name="flood-map"> + <dc:variable name="facet_type" value="floodmap.wsplgen"/> + <dc:call-macro name="select-facets"> + <floodmap> + <dc:for-each> + <dc:element name="${facet_name}"> + <dc:attribute name="description" value="${facet_description}"/> + <dc:attribute name="factory" value="winfo"/> + <dc:attribute name="artifact-id" value="${aid}"/> + <dc:attribute name="ids" value="${aid}"/> + <dc:attribute name="out" value="floodmap"/> + </dc:element> + </dc:for-each> + </floodmap> + </dc:call-macro> + </dc:macro> + + <dc:macro name="waterlevels"> + <dc:context> + <dc:statement> + SELECT id AS out_id + FROM outs + WHERE artifact_id = ${a_id} AND name = 'cross_section' + </dc:statement> + <dc:if test="dc:has-result()"> + <waterlevels> + <dc:for-each> <dc:context> <dc:statement> - SELECT id AS gauge_id, - name AS gauge_name - FROM gauges WHERE river_id = ${river_id} + SELECT name AS facet_name, num AS facet_num, description AS facet_description + FROM facets + WHERE out_id = ${out_id} + ORDER BY num ASC, name DESC + </dc:statement> + <longitudinal_section_columns description="{$river} {$a_creation}"> + <dc:for-each> + <dc:element name="${facet_name}"> + <dc:attribute name="description" value="${facet_description}"/> + <dc:attribute name="ids" value="${facet_num}"/> + <dc:attribute name="factory" value="winfo"/> + <dc:attribute name="artifact-id" value="${a_gid}"/> + <dc:attribute name="out" value="cross_section"/> + </dc:element> + </dc:for-each> + </longitudinal_section_columns> + </dc:context> + </dc:for-each> + </waterlevels> + </dc:if> + </dc:context> + </dc:macro> + + <dc:macro name="longitudinal"> + <dc:context> + <dc:statement> + SELECT id AS out_id + FROM outs + WHERE artifact_id = ${a_id} + AND name = 'longitudinal_section' + </dc:statement> + <dc:if test="dc:has-result()"> + <waterlevels> + <dc:for-each> + <dc:context> + <dc:statement> + SELECT name AS facet_name, + num AS facet_num, + description AS facet_description + FROM facets + WHERE out_id = ${out_id} + ORDER BY num ASC, name DESC + </dc:statement> + <longitudinal_section_columns description="{$river} {$a_creation}"> + <dc:for-each> + <dc:element name="${facet_name}"> + <dc:attribute name="description" value="${facet_description}"/> + <dc:attribute name="ids" value="${facet_num}"/> + <dc:attribute name="factory" value="winfo"/> + <dc:attribute name="artifact-id" value="${a_gid}"/> + <dc:attribute name="out" value="longitudinal_section"/> + </dc:element> + </dc:for-each> + </longitudinal_section_columns> + </dc:context> + </dc:for-each> + </waterlevels> + </dc:if> + </dc:context> + </dc:macro> + + <dc:macro name="longitudinal-section"> + <dc:context> + <dc:statement> + SELECT id AS out_id + FROM outs + WHERE artifact_id = ${a_id} + AND name = 'fix_longitudinal_section_curve' + </dc:statement> + <dc:if test="dc:has-result()"> + <waterlevels> + <dc:for-each> + <dc:context> + <dc:statement> + SELECT name AS facet_name, + num AS facet_num, + description AS facet_description + FROM facets + WHERE out_id = ${out_id} AND ( + name LIKE 'fix_deviation_ls%' OR + name LIKE 'fix_sector_average_ls%' OR + name LIKE 'fix_analysis_events_ls%' OR + name LIKE 'fix_reference_events_ls%') + ORDER BY num ASC, name DESC + </dc:statement> + <waterlevels description="{$river} {$a_creation} {$collection_name}"> + <dc:for-each> + <dc:element name="${facet_name}"> + <dc:attribute name="description" value="${facet_description}"/> + <dc:attribute name="ids" value="${facet_num}"/> + <dc:attribute name="factory" value="fixanalysis"/> + <dc:attribute name="artifact-id" value="${a_gid}"/> + <dc:attribute name="out" value="fix_longitudinal_section_curve"/> + </dc:element> + </dc:for-each> + </waterlevels> + </dc:context> + </dc:for-each> + </waterlevels> + </dc:if> + </dc:context> + </dc:macro> + + <dc:macro name="delta-wt"> + <dc:context> + <dc:statement> + SELECT id AS out_id + FROM outs + WHERE artifact_id = ${a_id} + AND name = 'fix_deltawt_curve' + </dc:statement> + <dc:if test="dc:has-result()"> + <waterlevels> + <dc:for-each> + <dc:context> + <dc:statement> + SELECT name AS facet_name, + num AS facet_num, + description AS facet_description + FROM facets + WHERE out_id = ${out_id} and ( + name LIKE 'fix_sector_average_dwt%' OR + name LIKE 'fix_deviation_dwt%' OR + name = 'fix_analysis_events_dwt' OR + name = 'fix_reference_events_dwt' OR + name = 'fix_analysis_periods_dwt') + ORDER BY num ASC, name DESC + </dc:statement> + <waterlevels description="{$river} {$a_creation} {$collection_name}"> + <dc:for-each> + <dc:element name="${facet_name}"> + <dc:attribute name="description" value="${facet_description}"/> + <dc:attribute name="ids" value="${facet_num}"/> + <dc:attribute name="factory" value="fixanalysis"/> + <dc:attribute name="artifact-id" value="${a_gid}"/> + <dc:attribute name="out" value="fix_deltawt_curve"/> + </dc:element> + </dc:for-each> + </waterlevels> + </dc:context> + </dc:for-each> + </waterlevels> + </dc:if> + </dc:context> + </dc:macro> + + <dc:macro name="delta-wt-ls"> + <dc:context> + <dc:statement> + SELECT id AS out_id + FROM outs + WHERE artifact_id = ${a_id} AND name = 'fix_deltawt_curve' + </dc:statement> + <dc:if test="dc:has-result()"> + <waterlevels> + <dc:for-each> + <dc:context> + <dc:statement> + SELECT name AS facet_name, num AS facet_num, description AS facet_description + FROM facets + WHERE out_id = ${out_id} and ( + name LIKE 'fix_sector_average_dwt%' OR + name LIKE 'fix_deviation_dwt%') + ORDER BY num ASC, name DESC + </dc:statement> + <waterlevels description="{$river} {$a_creation} {$collection_name}"> + <dc:for-each> + <dc:element name="${facet_name}"> + <dc:attribute name="description" value="${facet_description}"/> + <dc:attribute name="ids" value="${facet_num}"/> + <dc:attribute name="factory" value="fixanalysis"/> + <dc:attribute name="artifact-id" value="${a_gid}"/> + <dc:attribute name="out" value="fix_deltawt_curve"/> + </dc:element> + </dc:for-each> + </waterlevels> + </dc:context> + </dc:for-each> + </waterlevels> + </dc:if> + </dc:context> + </dc:macro> + + <dc:macro name="fix-derivate-curve"> + <dc:context> + <dc:statement> + SELECT id AS out_id + FROM outs + WHERE artifact_id = ${a_id} AND name = 'fix_derivate_curve' + </dc:statement> + <dc:if test="dc:has-result()"> + <waterlevels> + <dc:for-each> + <dc:context> + <dc:statement> + SELECT name AS facet_name, num AS facet_num, description AS facet_description + FROM facets + WHERE out_id = ${out_id} and name = 'fix_derivate_curve' + ORDER BY num ASC, name DESC + </dc:statement> + <waterlevels description="{$river} {$a_creation} {$collection_name}"> + <dc:for-each> + <dc:element name="${facet_name}"> + <dc:attribute name="description" value="${facet_description}"/> + <dc:attribute name="ids" value="${facet_num}"/> + <dc:attribute name="factory" value="fixanalysis"/> + <dc:attribute name="artifact-id" value="${a_gid}"/> + <dc:attribute name="out" value="fix_derivate_curve"/> + </dc:element> + </dc:for-each> + </waterlevels> + </dc:context> + </dc:for-each> + </waterlevels> + </dc:if> + </dc:context> + </dc:macro> + + <dc:macro name="fix-wq-curve"> + <dc:context> + <dc:statement> + SELECT id AS out_id + FROM outs + WHERE artifact_id = ${a_id} AND name = 'fix_wq_curve' + </dc:statement> + <dc:if test="dc:has-result()"> + <waterlevels> + <dc:for-each> + <dc:context> + <dc:statement> + SELECT name AS facet_name, num AS facet_num, description AS facet_description + FROM facets + WHERE out_id = ${out_id} and ( + name LIKE 'fix_sector_average_wq%' OR + name = 'fix_wq_curve' OR + name LIKE 'fix_analysis_events_wq%' OR + name LIKE 'fix_reference_events_wq%' ) + ORDER BY num ASC, name DESC + </dc:statement> + <waterlevels description="{$river} {$a_creation} {$collection_name}"> + <dc:for-each> + <dc:element name="${facet_name}"> + <dc:attribute name="description" value="${facet_description}"/> + <dc:attribute name="ids" value="${facet_num}"/> + <dc:attribute name="factory" value="fixanalysis"/> + <dc:attribute name="artifact-id" value="${a_gid}"/> + <dc:attribute name="out" value="fix_wq_curve"/> + </dc:element> + </dc:for-each> + </waterlevels> + </dc:context> + </dc:for-each> + </waterlevels> + </dc:if> + </dc:context> + </dc:macro> + + <dc:macro name="duration-curve"> + <dc:context> + <dc:statement> + SELECT a.gid AS aid, + f.id AS fid, + f.name AS facet_name, + f.num AS facet_num, + f.description AS facet_description + FROM outs AS o, facets AS f, artifacts AS a + WHERE + (f.name = 'duration_curve.q' OR f.name = 'duration_curve.w') AND + f.out_id = o.id AND + o.artifact_id = ${a_id} AND + a.id = ${a_id} + </dc:statement> + <dc:if test="dc:has-result()"> + <computed_discharge_curves> + <dc:for-each> + <dc:element name="${facet_name}"> + <dc:attribute name="description" value="${facet_description}"/> + <dc:attribute name="factory" value="winfo"/> + <dc:attribute name="artifact-id" value="${aid}"/> + <dc:attribute name="ids" value="${aid}"/> + <dc:attribute name="out" value="duration_curve"/> + </dc:element> + </dc:for-each> + </computed_discharge_curves> + </dc:if> + </dc:context> + </dc:macro> + + <dc:comment>TODO doesnt work nicely for fix/wq-diags.</dc:comment> + <dc:macro name="waterlevels-fix"> + <dc:context> + <dc:statement> + SELECT id AS out_id + FROM outs + WHERE artifact_id = ${a_id} AND name = 'longitudinal_section' + </dc:statement> + <dc:if test="dc:has-result()"> + <waterlevels> + <dc:for-each> + <dc:context> + <dc:statement> + SELECT name AS facet_name, num AS facet_num, description AS facet_description + FROM facets + WHERE out_id = ${out_id} and name = 'longitudinal_section.w' + ORDER BY num ASC, name DESC + </dc:statement> + <waterlevels description="{$river} {$a_creation} {$collection_name}"> + <dc:for-each> + <dc:element name="${facet_name}"> + <dc:attribute name="description" value="${facet_description}"/> + <dc:attribute name="ids" value="${facet_num}"/> + <dc:attribute name="factory" value="winfo"/> + <dc:attribute name="artifact-id" value="${a_gid}"/> + <dc:attribute name="out" value="longitudinal_section"/> + </dc:element> + </dc:for-each> + </waterlevels> + </dc:context> + </dc:for-each> + </waterlevels> + </dc:if> + </dc:context> + </dc:macro> + + <dc:macro name="floodmap-hws-user"> + <dc:context> + <dc:statement> + SELECT id AS out_id + FROM outs + WHERE artifact_id = ${a_id} AND name = 'floodmap' + </dc:statement> + <dc:for-each> + <dc:context> + <dc:statement> + SELECT name AS facet_name, + num AS facet_num, + description AS facet_description + FROM facets + WHERE out_id = ${out_id} AND name = 'floodmap.usershape' + ORDER BY num ASC, name DESC + </dc:statement> + <own-hws> + <dc:for-each> + <dc:element name="${facet_name}"> + <dc:attribute name="description" value="${facet_description}"/> + <dc:attribute name="ids" value="${facet_num}"/> + <dc:attribute name="factory" value="winfo"/> + <dc:attribute name="artifact-id" value="${a_gid}"/> + <dc:attribute name="out" value="floodmap"/> + </dc:element> + </dc:for-each> + </own-hws> + </dc:context> + </dc:for-each> + </dc:context> + </dc:macro> + + <dc:macro name="bedquality-bed"> + <dc:context> + <dc:statement> + SELECT id AS oid + FROM outs AS o + WHERE + o.artifact_id = ${a_id} AND + o.name='bed_longitudinal_section' + </dc:statement> + <dc:if test="dc:has-result()"> + <bed_quality_bed> + <dc:for-each> + <quality-bed description="{$river} {$a_creation} {$collection_name}"> + <dc:context> + <dc:statement> + SELECT a.gid AS aid, + f.id AS fid, + f.name AS facet_name, + f.num AS facet_num, + f.description AS facet_description + FROM outs AS o, facets AS f, artifacts AS a + WHERE + (f.name = 'bed_longitudinal_section.bed_diameter_toplayer' + OR f.name = 'bed_longitudinal_section.bed_diameter_sublayer') AND + f.out_id = o.id AND + o.artifact_id = ${a_id} AND + a.id = ${a_id} + </dc:statement> + <dc:for-each> + <dc:element name="${facet_name}"> + <dc:attribute name="factory" value="minfo"/> + <dc:attribute name="description" value="${facet_description}"/> + <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> + <dc:attribute name="artifact-id" value="${aid}"/> + <dc:attribute name="out" value="bed_longitudinal_section"/> + </dc:element> + </dc:for-each> + </dc:context> + </quality-bed> + </dc:for-each> + </bed_quality_bed> + </dc:if> + </dc:context> + </dc:macro> + + <dc:macro name="bedquality-load"> + <dc:context> + <dc:statement> + SELECT id AS oid + FROM outs AS o + WHERE + o.artifact_id = ${a_id} AND + o.name='bed_longitudinal_section' + </dc:statement> + <dc:if test="dc:has-result()"> + <bed_quality_load> + <dc:for-each> + <quality-load description="{$river} {$a_creation} {$collection_name}"> + <dc:context> + <dc:statement> + SELECT a.gid AS aid, + f.id AS fid, + f.name AS facet_name, + f.num AS facet_num, + f.description AS facet_description + FROM outs AS o, facets AS f, artifacts AS a + WHERE + f.name = 'bed_longitudinal_section.bedload_diameter' AND + f.out_id = o.id AND + o.artifact_id = ${a_id} AND + a.id = ${a_id} + </dc:statement> + <dc:for-each> + <dc:element name="${facet_name}"> + <dc:attribute name="factory" value="minfo"/> + <dc:attribute name="description" value="${facet_description}"/> + <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> + <dc:attribute name="artifact-id" value="${aid}"/> + <dc:attribute name="out" value="bed_longitudinal_section"/> + </dc:element> + </dc:for-each> + </dc:context> + </quality-load> + </dc:for-each> + </bed_quality_load> + </dc:if> + </dc:context> + </dc:macro> + + <dc:macro name="bedquality-density"> + <dc:context> + <dc:statement> + SELECT id AS oid + FROM outs AS o + WHERE + o.artifact_id = ${a_id} AND + o.name='bed_longitudinal_section' + </dc:statement> + <dc:if test="dc:has-result()"> + <bed_quality_density> + <dc:for-each> + <density description="{$river} {$a_creation} {$collection_name}"> + <dc:context> + <dc:statement> + SELECT a.gid AS aid, + f.id AS fid, + f.name AS facet_name, + f.num AS facet_num, + f.description AS facet_description + FROM outs AS o, facets AS f, artifacts AS a + WHERE + (f.name = 'bed_longitudinal_section.sediment_density_toplayer' OR + f.name = 'bed_longitudinal_section.sediment_density_sublayer') AND + f.out_id = o.id AND + o.artifact_id = ${a_id} AND + a.id = ${a_id} + </dc:statement> + <dc:for-each> + <dc:element name="${facet_name}"> + <dc:attribute name="factory" value="minfo"/> + <dc:attribute name="description" value="${facet_description}"/> + <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> + <dc:attribute name="artifact-id" value="${aid}"/> + <dc:attribute name="out" value="bed_longitudinal_section"/> + </dc:element> + </dc:for-each> + </dc:context> + </density> + </dc:for-each> + </bed_quality_density> + </dc:if> + </dc:context> + </dc:macro> + + <dc:macro name="bedquality-porosity"> + <dc:context> + <dc:statement> + SELECT id AS oid + FROM outs AS o + WHERE + o.artifact_id = ${a_id} AND + o.name='bed_longitudinal_section' + </dc:statement> + <dc:if test="dc:has-result()"> + <bed_quality_porosity> + <dc:for-each> + <porosity description="{$river} {$a_creation} {$collection_name}"> + <dc:context> + <dc:statement> + SELECT a.gid AS aid, + f.id AS fid, + f.name AS facet_name, + f.num AS facet_num, + f.description AS facet_description + FROM outs AS o, facets AS f, artifacts AS a + WHERE + (f.name = 'bed_longitudinal_section.porosity_toplayer' OR + f.name = 'bed_longitudinal_section.porosity_sublayer') AND + f.out_id = o.id AND + o.artifact_id = ${a_id} AND + a.id = ${a_id} + </dc:statement> + <dc:for-each> + <dc:element name="${facet_name}"> + <dc:attribute name="factory" value="minfo"/> + <dc:attribute name="description" value="${facet_description}"/> + <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> + <dc:attribute name="artifact-id" value="${aid}"/> + <dc:attribute name="out" value="bed_longitudinal_section"/> + </dc:element> + </dc:for-each> + </dc:context> + </porosity> + </dc:for-each> + </bed_quality_porosity> + </dc:if> + </dc:context> + </dc:macro> + + <dc:macro name="flow-velocity"> + <dc:context> + <dc:statement> + SELECT id AS oid + FROM outs AS o + WHERE + o.artifact_id = ${a_id} and o.name='flow_velocity' + </dc:statement> + <dc:if test="dc:has-result()"> + <flow-velocity> + <dc:for-each> + <flow description="{$river} {$a_creation} {$collection_name}"> + <dc:context> + <dc:statement> + SELECT a.gid AS aid, + f.id AS fid, + f.name AS facet_name, + f.num AS facet_num, + f.description AS facet_description + FROM outs AS o, facets AS f, artifacts AS a + WHERE + (f.name = 'flow_velocity.totalchannel' OR + f.name = 'flow_velocity.mainchannel' OR + f.name = 'flow_velocity.totalchannel.filtered' OR + f.name = 'flow_velocity.mainchannel.filtered') AND + f.out_id = o.id AND + o.artifact_id = ${a_id} AND + a.id = ${a_id} + </dc:statement> + <dc:for-each> + <dc:element name="${facet_name}"> + <dc:attribute name="factory" value="minfo"/> + <dc:attribute name="description" value="${facet_description}"/> + <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> + <dc:attribute name="artifact-id" value="${aid}"/> + <dc:attribute name="out" value="flow_velocity"/> + </dc:element> + </dc:for-each> + </dc:context> + </flow> + </dc:for-each> + </flow-velocity> + </dc:if> + </dc:context> + </dc:macro> + + <dc:macro name="sediment-load"> + <dc:context> + <dc:statement> + SELECT id AS oid + FROM outs AS o + WHERE + o.artifact_id = ${a_id} and o.name='sedimentload_ls' + </dc:statement> + <dc:if test="dc:has-result()"> + <sediment-load> + <dc:for-each> + <load description="{$river} {$a_creation} {$collection_name}"> + <dc:context> + <dc:statement> + SELECT a.gid AS aid, + f.id AS fid, + f.name AS facet_name, + f.num AS facet_num, + f.description AS facet_description + FROM outs AS o, facets AS f, artifacts AS a + WHERE f.name LIKE 'sedimentload%' AND + f.out_id = o.id AND + o.artifact_id = ${a_id} AND + a.id = ${a_id} + </dc:statement> + <dc:for-each> + <dc:element name="${facet_name}"> + <dc:attribute name="factory" value="minfo"/> + <dc:attribute name="description" value="${facet_description}"/> + <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> + <dc:attribute name="artifact-id" value="${aid}"/> + <dc:attribute name="out" value="sedimentload_ls"/> + </dc:element> + </dc:for-each> + </dc:context> + </load> + </dc:for-each> + </sediment-load> + </dc:if> + </dc:context> + </dc:macro> + + <dc:macro name="bedheight-differences"> + <dc:context> + <dc:statement> + SELECT id AS oid, + name AS o_name + FROM outs AS o + WHERE + o.artifact_id = ${a_id} AND + (o.name = 'bed_difference_year' OR + o.name = 'bed_differnece_epoch') + </dc:statement> + <dc:if test="dc:has-result()"> + <bedheight-differences> + <dc:for-each> + <difference description="{$river} {$a_creation} {$collection_name}"> + <dc:context> + <dc:statement> + SELECT a.gid AS aid, + f.id AS fid, + f.name AS facet_name, + f.num AS facet_num, + f.description AS facet_description + FROM outs AS o, facets AS f, artifacts AS a + WHERE (f.name LIKE 'bedheight_difference.year%' OR + f.name LIKE 'bedheight_difference.epoch%') AND + f.out_id = o.id AND + o.artifact_id = ${a_id} AND + a.id = ${a_id} + </dc:statement> + <dc:for-each> + <dc:element name="${facet_name}"> + <dc:attribute name="factory" value="minfo"/> + <dc:attribute name="description" value="${facet_description}"/> + <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> + <dc:attribute name="artifact-id" value="${aid}"/> + <dc:choose> + <dc:when test="dc:contains($o_name, 'bed_difference_year')"> + <dc:attribute name="out" value="bed_difference_year"/> + </dc:when> + <dc:otherwise> + <dc:attribute name="out" value="bed_difference_epoch"/> + </dc:otherwise> + </dc:choose> + </dc:element> + </dc:for-each> + </dc:context> + </difference> + </dc:for-each> + </bedheight-differences> + </dc:if> + </dc:context> + </dc:macro> + + <dc:macro name="waterlevels-discharge"> + <dc:context> + <dc:statement> + SELECT id AS oid + FROM outs AS o + WHERE + o.artifact_id = ${a_id} AND + o.name = 'discharge_longitudinal_section' + </dc:statement> + <dc:if test="dc:has-result()"> + <waterlevels-discharge> + <dc:for-each> + <discharge description="{$oid} {$river} {$a_id} {$a_creation} {$collection_name}"> + <dc:context> + <dc:statement> + SELECT a.gid AS aid, + f.id AS fid, + f.name AS facet_name, + f.num AS facet_num, + f.description AS facet_description + FROM outs AS o, facets AS f, artifacts AS a + WHERE f.name = 'discharge_longitudinal_section.w' AND + f.out_id = o.id AND + o.artifact_id = ${a_id} AND + a.id = ${a_id} + </dc:statement> + <dc:for-each> + <dc:element name="${facet_name}"> + <dc:attribute name="factory" value="winfo"/> + <dc:attribute name="description" value="${facet_description}"/> + <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> + <dc:attribute name="artifact-id" value="${aid}"/> + <dc:attribute name="out" value="longitudinal_section"/> + </dc:element> + </dc:for-each> + </dc:context> + </discharge> + </dc:for-each> + </waterlevels-discharge> + </dc:if> + </dc:context> + </dc:macro> + <!-- Macros to load system data --> + + <dc:macro name="annotations"> + <annotation factory="annotations" ids="{$river_id}"/> + </dc:macro> + + <dc:macro name="mainvalues"> + <wmainvalue factory="mainvalue" ids="{$river_id}:w"/> + <qmainvalue factory="mainvalue" ids="{$river_id}:q"/> + </dc:macro> + + <dc:macro name="cross_sections"> + <cross_sections id="flood-protections-{$river_id}"> + <dc:context connection="system"> + <dc:statement> + SELECT DISTINCT + cs.id AS prot_id, + cs.description AS prot_description + FROM cross_sections cs + JOIN cross_section_lines csl ON csl.cross_section_id = cs.id + WHERE cs.river_id = ${river_id} + AND csl.km BETWEEN ${fromkm} AND ${tokm} + </dc:statement> + <dc:for-each> + <cross_section name="{$prot_description}" + ids="{$prot_id}" + factory="crosssections"/> + </dc:for-each> + </dc:context> + </cross_sections> + </dc:macro> + + <dc:macro name="hyks"> + <hyks id="hyk-{$river_id}"> + <dc:context connection="system"> + <dc:statement> + SELECT DISTINCT + h.id AS hyk_id, + h.description AS hyk_description + FROM hyks h + JOIN hyk_entries he ON he.hyk_id = h.id + WHERE river_id = ${river_id} + AND he.km BETWEEN ${fromkm} AND ${tokm} + </dc:statement> + <dc:for-each> + <hyk name="{$hyk_description}" + ids="{$hyk_id}" + factory="hyk"/> + </dc:for-each> + </dc:context> + </hyks> + </dc:macro> + + <dc:macro name="fixings-macro"> + <dc:filter expr="$kind=2"> + <dc:if test="dc:has-result()"> + <fixations> + <dc:group expr="dc:replace($wst_description, 'Fixierungen/', '')"> + <fixation name="{dc:group-key()}"> + <dc:for-each> + <dc:macro-body/> + </dc:for-each> + </fixation> + </dc:group> + </fixations> + </dc:if> + </dc:filter> + </dc:macro> + + <dc:macro name="basedata_2_fixations_wqkms"> + <dc:call-macro name="fixings-macro"> + <column name="{$wst_column_name}" + ids="fixations-wstv-{$wst_column_position}-{$wst_id}" + factory="wqinterpol" + info="{$info} [km {$deffrom} - {$defto}]"/> + </dc:call-macro> + </dc:macro> + + <dc:macro name="basedata_2_fixations"> + <dc:call-macro name="fixings-macro"> + <column name="{$wst_column_name}" + ids="fixations-wstv-{$wst_column_position}-{$wst_id}" + factory="staticwqkms" + info="{$info} [km {$deffrom} - {$defto}]"/> + </dc:call-macro> + </dc:macro> + + <dc:macro name="basedata_3_officials"> + <dc:filter expr="$kind=3"> + <dc:if test="dc:has-result()"> + <officiallines> + <dc:group expr="$wst_description"> + <official name="{dc:group-key()}"> + <dc:for-each> + <column name="{$wst_column_name}" + ids="additionals-wstv-{$wst_column_position}-{$wst_id}" + factory="staticwqkms" + info="{$info} [km {$deffrom} - {$defto}]"/> + </dc:for-each> + </official> + </dc:group> + </officiallines> + </dc:if> + </dc:filter> + </dc:macro> + + <dc:macro name="basedata_4_heightmarks-points"> + <dc:filter expr="$kind=4"> + <dc:if test="dc:has-result()"> + <heightmarks> + <dc:group expr="{dc:replace($wst_description, 'HW-Marken/', '')}"> + <heightmark name="dc:group-key()"> + <dc:for-each> + <column name="{$wst_column_name}" + ids="heightmarks_points-wstv-{$wst_column_position}-{$wst_id}" + factory="staticwkms" + info="{$info} [km {$deffrom} - {$defto}]"/> + </dc:for-each> + </heightmark> + </dc:group> + </heightmarks> + </dc:if> + </dc:filter> + </dc:macro> + + <dc:macro name="basedata_4_heightmarks-points-relative_points"> + <dc:filter expr="$kind=4"> + <dc:if test="dc:has-result()"> + <heightmarks> + <dc:group expr="{dc:replace($wst_description, 'HW-Marken/', '')}"> + <relativepoint name="dc:group-key()"> + <dc:for-each> + <column name="{$wst_column_name}" + ids="heightmarks_points-wstv-{$wst_column_position}-{$wst_id}" + factory="staticwkms" + info="{$info} [km {$deffrom} - {$defto}]"/> + </dc:for-each> + </relativepoint> + </dc:group> + </heightmarks> + </dc:if> + </dc:filter> + </dc:macro> + + <dc:macro name="longitudinal-section-prototype"> + <dc:call-macro name="basedata_0"/> + <dc:call-macro name="basedata_1_additionals"/> + <dc:call-macro name="basedata_2_fixations"/> + <dc:call-macro name="basedata_4_heightmarks-points"/> + <dc:call-macro name="basedata_3_officials"/> + <dc:call-macro name="basedata_5_flood-protections"/> + <dc:call-macro name="annotations_per_type"/> + </dc:macro> + + <dc:macro name="basedata_5_flood-protections"> + <dc:filter expr="$kind=5"> + <dc:if test="dc:has-result()"> + <flood_protections> + <dc:group expr="dc:replace($wst_description, 'HW-Schutzanlagen/', '')"> + <flood_protection name="{dc:group-key()}"> + <dc:for-each> + <column name="{$wst_column_name}" + ids="flood_protection-wstv-{$wst_column_position}-{$wst_id}" + factory="staticwkms" + info="{$info} [km {$deffrom} - {$defto}]"/> + </dc:for-each> + </flood_protection> + </dc:group> + </flood_protections> + </dc:if> + </dc:filter> + </dc:macro> + + <dc:macro name="annotations_per_type"> + <annotations> + <dc:context> + <all_annotations factory="annotations" ids="{$river_id}"/> + <dc:statement> + SELECT id AS anno_id, + name AS anno_description + FROM annotation_types + </dc:statement> + <dc:for-each> + <annotation name="{$anno_description}" + factory="annotations" + ids="{$river_id}:{$anno_description}"/> + </dc:for-each> + </dc:context> + </annotations> + </dc:macro> + + <dc:macro name="basedata_2_fixations_relative_point"> + <dc:filter expr="$kind=2"> + <dc:if test="dc:has-result()"> + <fixations> + <dc:group expr="dc:replace($wst_description, 'Fixierungen/', '')"> + <relativepoint name="{dc:group-key()}"> + <dc:for-each> + <column name="{$wst_column_name}" + ids="fixations-wstv-{$wst_column_position}-{$wst_id}" + factory="staticwkms" + info="{$info} [km {$deffrom} - {$defto}]"/> + </dc:for-each> + </relativepoint> + </dc:group> + </fixations> + </dc:if> + </dc:filter> + </dc:macro> + + <dc:macro name="basedata_5_flood-protections_relative_points"> + <dc:filter expr="$kind=5"> + <dc:if test="dc:has-result()"> + <flood_protections> + <dc:group expr="$wst_description"> + <relativepoint name="{dc:group-key()}"> + <dc:for-each> + <column name="{$wst_column_name}" + ids="flood_protection-wstv-{$wst_column_position}-{$wst_id}" + factory="staticwkms" + info="{$info} [km {$deffrom} - {$defto}]"/> + </dc:for-each> + </relativepoint> + </dc:group> + </flood_protections> + </dc:if> + </dc:filter> + </dc:macro> + + <dc:macro name="basedata_1_additionals-relative_point"> + <dc:filter expr="$kind=1"> + <dc:if test="dc:has-result()"> + <additionals> + <dc:group expr="$wst_description"> + <relativepoint name="{dc:group-key()}"> + <dc:for-each> + <column name="{$wst_column_name}" + ids="additionals-wstv-{$wst_column_position}-{$wst_id}" + factory="staticwkms" + info="{$info} [km {$deffrom} - {$defto}]"/> + </dc:for-each> + </relativepoint> + </dc:group> + </additionals> + </dc:if> + </dc:filter> + </dc:macro> + + <dc:macro name="discharge_table_gauge"> + <dc:context> + <dc:statement> + SELECT id AS gauge_id, + name AS gauge_name + FROM gauges WHERE river_id = ${river_id} + </dc:statement> + <dc:if test="dc:has-result()"> + <discharge_table_nn> + <discharge_table_gauge> + <dc:for-each> + <gauge name="{$gauge_name}" + factory="gaugedischarge" + from="{$g_start}" + to="{$g_stop}" + ids="{$gauge_name}"/> + </dc:for-each> + </discharge_table_gauge> + </discharge_table_nn> + </dc:if> + </dc:context> + </dc:macro> + + <dc:comment>TODO: Why is this just a copy of the discharge_table_gauge?</dc:comment> + <dc:macro name="discharge_computed"> + <dc:call-macro name="discharge_table_gauge"/> + </dc:macro> + + <dc:comment>TODO: Why is this just a copy of the discharge_table_gauge?</dc:comment> + <dc:macro name="discharge_fix_wq"> + <dc:call-macro name="discharge_table_gauge"/> + </dc:macro> + + <dc:macro name="qsectors"> + <qsector factory="qsectors" ids="{$river_id}"/> + </dc:macro> + + <dc:macro name="flood-map-recommended"> + <kilometrage> + <riveraxis factory="riveraxis" ids="{$river_id}"/> + </kilometrage> + <rastermap> + <background factory="wmsbackground" ids="{$river_id}"/> + </rastermap> + </dc:macro> + + <dc:macro name="minfo-heights"> + <bedheights> + <dc:call-macro name="bed-heights-single"/> + <dc:call-macro name="bed-heights-epoch"/> + </bedheights> + </dc:macro> + + <dc:macro name="bed-heights-single"> + <single> + <dc:context> + <dc:statement> + SELECT id AS bedh_id, + year AS bedh_year, + description AS bedh_descr + FROM bed_height_single WHERE river_id = ${river_id} + </dc:statement> + <dc:for-each> + <height factory="bedheight" + ids="bedheight-single-{$bedh_id}-{$bedh_year}" + description="{$bedh_descr}"/> + </dc:for-each> + </dc:context> + </single> + </dc:macro> + + <dc:macro name="bed-heights-epoch"> + <epoch> + <dc:context> + <dc:statement> + SELECT id AS bedh_id, + time_interval_id AS bedh_interval_id, + description AS bedh_descr + FROM bed_height_epoch WHERE river_id = ${river_id} + </dc:statement> + <dc:for-each> + <height factory="bedheight" + ids="bedheight-epoch-{$bedh_id}-{$bedh_interval_id}" + description="{$bedh_descr}"/> + </dc:for-each> + </dc:context> + </epoch> + </dc:macro> + + <dc:macro name="flow_velocity_measurements"> + <dc:context> + <dc:statement> + SELECT id AS fvmid, + description AS fvmd + FROM flow_velocity_measurements WHERE river_id = ${river_id} + </dc:statement> + <dc:if test="dc:has-result()"> + <flowvelocitymeasurement> + <dc:for-each> + <dc:comment>TODO: Why has this an id and factory?</dc:comment> + <flow_velocity_measurement name="{$fvmd}" + ids="{$fvmid}" + factory="flowvelocity"> + <dc:context> + <dc:statement> + SELECT id, description, station, datetime, v, w, q + FROM flow_velocity_measure_values + WHERE measurements_id = ${fvmid} + AND station BETWEEN ${fromkm} AND ${tokm} + </dc:statement> + <dc:for-each> + <measurement_value name="{$description} - {$station} - {$datetime}" + ids="{$id}" + factory="flowvelocity"/> + </dc:for-each> + </dc:context> + </flow_velocity_measurement> + </dc:for-each> + </flowvelocitymeasurement> + </dc:if> + </dc:context> + </dc:macro> + + <dc:macro name="morph_width"> + <dc:context> + <dc:statement> + SELECT id AS width_id + FROM morphologic_width + WHERE river_id = ${river_id} + </dc:statement> + <dc:if test="dc:has-result()"> + <morph_width> + <dc:for-each> + <dc:context> + <dc:statement> + SELECT min(station) AS from_station, + max(station) AS to_station + FROM morphologic_width_values + WHERE morphologic_width_id = ${width_id} </dc:statement> <dc:for-each> - <gauge name="{$gauge_name}" - db-id="{$gauge_id}" - factory="gaugedischarge" out="{$OUT}" - from="{$g_start}" - to="{$g_stop}" - ids="{$gauge_name}"/> - <dc:comment> - <!-- - <gauge> - <dc:attribute name="name" value="${gauge_name}"/> - <dc:attribute name="db-id" value="${gauge_id}"/> - <dc:context> - <dc:statement> - SELECT description AS gauge_desc, - d.id AS discharge_id, - ti.start_time AS g_start, - ti.stop_time AS g_stop - FROM discharge_tables d JOIN time_intervals ti - ON d.time_interval_id = ti.id - WHERE d.gauge_id = ${gauge_id} AND d.kind = 1 - </dc:statement> - <dc:for-each> - <historical> - <dc:attribute name="name" value="${gauge_desc}"/> - <dc:attribute name="factory" value="gaugedischarge"/> - <dc:attribute name="out" value="${out}"/> - <dc:attribute name="from" value="${g_start}"/> - <dc:attribute name="to" value="${g_stop}"/> - <dc:attribute name="ids" value="${discharge_id}-${g_start}-${g_stop}"/> - </historical> - </dc:for-each> - </dc:context> - </gauge> - --> - </dc:comment> + <morphologic-width name="{$from_station} - {$to_station}" + ids="{$width_id}" + factory="morph-width"/> </dc:for-each> </dc:context> - </discharge_table_gauge> - </discharge_table_nn> - </dc:macro> + </dc:for-each> + </morph_width> + </dc:if> + </dc:context> + </dc:macro> - <dc:macro name="discharge_fix_wq"> - <discharge_table_nn> - <discharge_table_gauge> - <dc:context> - <dc:statement> - SELECT id AS gauge_id, - name AS gauge_name - FROM gauges WHERE river_id = ${river_id} - </dc:statement> - <dc:for-each> - <gauge name="{$gauge_name}" - db-id="{$gauge_id}" - factory="gaugedischarge" out="{$OUT}" - from="{$g_start}" - to="{$g_stop}" - ids="{$gauge_name}"/> - </dc:for-each> - </dc:context> - </discharge_table_gauge> - </discharge_table_nn> + <dc:macro name="sounding-width"> + <dc:context> + <dc:statement> + SELECT id AS bedh_id, + year AS bedh_year, + description AS bedh_descr + FROM bed_height_single WHERE river_id = ${river_id} + </dc:statement> + <dc:if test="dc:has-result()"> + <soundings_width> + <dc:for-each> + <height factory="bedheight" + ids="bedheight-singlevalues-{$bedh_id}-{$bedh_year}" + description="{$bedh_descr}"/> + </dc:for-each> + </soundings_width> + </dc:if> + </dc:context> + </dc:macro> + + <dc:macro name="basedata_0_macro"> + <basedata> + <dc:filter expr="$kind = 0"> + <dc:group expr="$wst_description"> + <basedata name="{dc:group-key()}"> + <dc:for-each> + <dc:macro-body/> + </dc:for-each> + </basedata> + </dc:group> + </dc:filter> + </basedata> + </dc:macro> + + <dc:macro name="basedata_0"> + <dc:call-macro name="basedata_0_macro"> + <column name="{$wst_column_name}" + ids="base_data-wstv-{$wst_column_position}-{$wst_id}" + factory="staticwqkms" + info="{$info} [km {$deffrom} - {$defto}]"/> + </dc:call-macro> + </dc:macro> + + <dc:macro name="basedata_0_wq"> + <dc:call-macro name="basedata_0_macro"> + <column name="{$wst_column_name}" + ids="base_data-wstv-{$wst_column_position}-{$wst_id}" + factory="wqinterpol" + info="{$info} [km {$deffrom} - {$defto}]"/> + </dc:call-macro> + </dc:macro> + + <dc:macro name="basedata_1_additionals_macro"> + <additionals> + <dc:filter expr="$kind=1"> + <dc:group expr="dc:replace($wst_description, 'Zus.Längsschnitte/', '')"> + <additional name="{dc:group-key()}"> + <dc:macro-body/> + </additional> + </dc:group> + </dc:filter> + </additionals> + </dc:macro> + + <dc:macro name="basedata_1_additionals"> + <dc:call-macro name="basedata_1_additionals_macro"> + <column name="{$wst_column_name}" + ids="additionals-wstv-{$wst_column_position}-{$wst_id}" + factory="staticwqkms" + info="{$info} [km {$deffrom} - {$defto}]"/> + </dc:call-macro> + </dc:macro> + + <dc:macro name="basedata_1_additionals_marks"> + <dc:call-macro name="basedata_1_additionals_macro"> + <column name="{$wst_column_name}" + ids="additionalsmarks-wstv-{$wst_column_position}-{$wst_id}" + factory="staticwkms" + info="{$info} [km {$deffrom} - {$defto}]"/> + </dc:call-macro> + </dc:macro> + + <!-- Floodmap part --> + <dc:macro name="flood-map-complete"> + <dc:call-macro name="flood-map-buildings"/> + <dc:call-macro name="catchments"/> + <dc:call-macro name="floodmarks"/> + <hws> + <dc:call-macro name="hwslines"/> + <dc:call-macro name="hwspoints"/> + </hws> + <dc:call-macro name="flood-map-routing"/> + <hydrboundaries> + <dc:call-macro name="flood-map-floodplain"/> + <dc:call-macro name="flood-map-hydr-boundaries"/> + </hydrboundaries> + <dc:call-macro name="flood-map-uesk"/> + </dc:macro> + + <dc:macro name="flood-map-routing"> + <route_data> + <dc:call-macro name="flood-map-qps"/> + <dc:call-macro name="flood-map-fixpoints"/> + <dc:call-macro name="flood-map-km"/> + <dc:call-macro name="flood-map-riveraxis"/> + </route_data> + </dc:macro> + + <dc:macro name="flood-map-hydr-boundaries"> + <bfg_model> + <dc:call-macro name="flood-map-hydr-boundaries-poly"/> + <dc:call-macro name="flood-map-hydr-boundaries-lines"/> + </bfg_model> + <dc:call-macro name="flood-map-hydr-boundaries-state"/> + </dc:macro> + + <dc:macro name="flood-map-recommended"> + <dc:comment> + FIXME: Following two macros look identical to me. + </dc:comment> + <kilometrage> + <riveraxis factory="riveraxis" ids="{$river_id}"/> + </kilometrage> + <rastermap> + <background factory="wmsbackground" ids="{$river_id}"/> + </rastermap> + </dc:macro> + + <dc:macro name="flood-map-dem"> + <dems> + <dc:context> + <dc:statement> + SELECT d.id AS dem_id, + r.a AS dem_lower, + r.b AS dem_upper, + d.name AS name, + t.start_time AS start_time, + t.stop_time AS stop_time, + 'Projektion: ' || d.projection || '$' || + 'Rasterweite: ' || d.resolution || 'm$' || + 'Format: ' || d.format || '$' || + 'Zeitraum: ' + AS info + FROM dem d + JOIN ranges r ON d.range_id = r.id + LEFT JOIN time_intervals t ON d.time_interval_id = t.id + WHERE d.river_id = ${river_id} + </dc:statement> + <dc:for-each> + <dem factory="demfactory" + ids="{$dem_id}" + name="{$name}" + info="{dc:replace($info, '$', '<BR>')}{dc:date-format('yyyy', $start_time)} - {dc:date-format('yyyy', $stop_time)}"/> + </dc:for-each> + </dc:context> + </dems> + </dc:macro> + + <dc:macro name="filter_hws_ddg"> + <dc:macro name="durchlass_damm_graben"> + <dc:macro name="ddg_factory"> + <dc:for-each> + <hws factory="hwsfactory" name="{$hws_name}"/> + </dc:for-each> </dc:macro> - <dc:choose> - <dc:when test="dc:contains($parameters, 'recommended')"> - <dc:comment> - Recommendations (client shall load immediately). - </dc:comment> - <dc:iterate var="out" container="artifact-outs"> - <dc:choose> - <dc:when test="$out = 'w_differences'"> - <dc:call-macro name="annotations"/> - </dc:when> - <dc:when test="$out = 'discharge_longitudinal_section'"> - <dc:call-macro name="annotations"/> - </dc:when> - <dc:when test="$out = 'historical_discharge_wq'"> - <dc:call-macro name="mainvalues"/> - </dc:when> - <dc:when test="$out = 'cross_section'"> - <dc:call-macro name="cross_sections"/> - <dc:call-macro name="hyks"/> - </dc:when> - <dc:when test="$out = 'discharge_curve'"> - <dc:call-macro name="mainvalues"/> - </dc:when> - <dc:when test="$out = 'computed_discharge_curve'"> - <dc:call-macro name="mainvalues"/> - <dc:call-macro name="basedata_2_fixations_wqkms"/> - </dc:when> - <dc:when test="$out = 'duration_curve'"> - <dc:call-macro name="mainvalues"/> - </dc:when> - <dc:when test="$out = 'reference_curve'"> - <dc:call-macro name="annotations"/> - <dc:call-macro name="mainvalues"/> - </dc:when> - <dc:when test="$out = 'fix_wq_curve'"> - <dc:call-macro name="mainvalues"/> - <dc:call-macro name="qsectors"/> - </dc:when> - <dc:when test="$out = 'longitudinal_section'"> - <dc:call-macro name="annotations"/> - </dc:when> - <dc:when test="$out = 'fix_longitudinal_section_curve'"> - <dc:call-macro name="annotations"/> - </dc:when> - <dc:when test="$out = 'bed_difference_epoch'"> - <dc:call-macro name="annotations"/> - </dc:when> - <dc:when test="$out = 'bed_difference_year'"> - <dc:call-macro name="annotations"/> - </dc:when> - <dc:when test="$out = 'bed_difference_height_year'"> - <dc:call-macro name="annotations"/> - </dc:when> - <dc:when test="$out = 'floodmap'"> - <dc:call-macro name="flood-map-recommended"/> - </dc:when> - <dc:when test="$out = 'floodmap-hws'"> - <dc:call-macro name="flood-map-recommended"/> - </dc:when> - <dc:when test="$out = 'minfo-heights'"> - <dc:call-macro name="minfo-heights"/> - <dc:macro name="minfo-heights"> - <bedheights> - <dc:call-macro name="bed-heights-single"/> - <dc:call-macro name="bed-heights-epoch"/> - </bedheights> - </dc:macro> - </dc:when> - <dc:when test="$out = 'minfo-heights-epoch'"> - <bedheights> - <dc:call-macro name="bed-heights-epoch"/> - </bedheights> - </dc:when> - </dc:choose> - </dc:iterate> - </dc:when> - <dc:otherwise> - <dc:comment> - Non - Recommendations. - </dc:comment> - <dc:iterate var="out" container="artifact-outs"> - <dc:choose> - <dc:when test="$out = 'cross_section'"> - <dc:call-macro name="basedata_0"/> - <dc:call-macro name="basedata_1_additionals"/> - <dc:call-macro name="basedata_2_fixations"/> - <dc:call-macro name="basedata_3_officials"/> - <dc:call-macro name="basedata_4_heightmarks-points"/> - <dc:call-macro name="cross_sections"/> - <dc:call-macro name="hyks"/> - </dc:when> - <dc:when test="$out = 'longitudinal_section'"> - <dc:call-macro name="longitudinal-section-prototype"/> - </dc:when> - <dc:when test="$out = 'w_differences'"> - <dc:call-macro name="longitudinal-section-prototype"/> - </dc:when> - <dc:when test="$out = 'discharge_longitudinal_section'"> - <dc:call-macro name="longitudinal-section-prototype"/> - </dc:when> - <dc:when test="$out = 'discharge_curve'"> - <dc:call-macro name="mainvalues"/> - </dc:when> - <dc:when test="$out = 'duration_curve'"> - <dc:call-macro name="mainvalues"/> - <dc:call-macro name="basedata_2_fixations_relative_point"/> - <dc:call-macro name="basedata_4_heightmarks-points-relative_points"/> - <dc:call-macro name="basedata_5_flood-protections_relative_points"/> - </dc:when> - <dc:when test="$out = 'reference_curve'"> - <dc:call-macro name="mainvalues"/> - <dc:call-macro name="annotations"/> - <dc:call-macro name="basedata_1_additionals-relative_point"/> - <dc:comment comment=" FIXATIONS ---------------------------"/> - <dc:call-macro name="basedata_2_fixations_relative_point"/> - <dc:comment comment=" HOEHENMARKEN ---------------------------"/> - <dc:call-macro name="basedata_4_heightmarks-points-relative_points"/> - <dc:call-macro name="basedata_5_flood-protections_relative_points"/> - </dc:when> - <dc:when test="$out = 'fix_wq_curve'"> - <dc:call-macro name="basedata_0_wq"/> - <dc:call-macro name="basedata_1_additionals_marks"/> - <dc:call-macro name="basedata_2_fixations_wqkms"/> - <dc:call-macro name="basedata_3_officials"/> - <dc:call-macro name="basedata_4_heightmarks-points"/> - <dc:call-macro name="basedata_5_flood-protections_relative_points"/> - <dc:call-macro name="discharge_table_gauge"/> - <dc:call-macro name="discharge_fix_wq"/> - </dc:when> - <dc:when test="$out = 'fix_deltawt_curve'"> - </dc:when> - <dc:when test="$out = 'fix_longitudinal_section_curve'"> - <dc:call-macro name="annotations"/> - </dc:when> - <dc:when test="$out = 'map'"> - <dc:call-macro name="flood-map-complete"/> - </dc:when> - <dc:when test="$out = 'flow_velocity'"> - <dc:call-macro name="annotations_per_type"/> - <dc:call-macro name="flow_velocity_measurements"/> - </dc:when> - <dc:when test="$out = 'bed_longitudinal_section'"> - <dc:call-macro name="annotations_per_type"/> - </dc:when> - <dc:when test="$out = 'sedimentload_ls'"> - <dc:call-macro name="annotations_per_type"/> - <dc:call-macro name="morph_width"/> - </dc:when> - <dc:comment> - MINFO bedheight middle - </dc:comment> - <dc:when test="$out = 'bedheight_middle'"> - <dc:call-macro name="sounding-width"/> - <dc:call-macro name="basedata_0"/> - <dc:call-macro name="basedata_1_additionals"/> - <dc:call-macro name="basedata_2_fixations"/> - <dc:call-macro name="basedata_3_officials"/> - <dc:call-macro name="annotations_per_type"/> - </dc:when> - <dc:when test="$out = 'bed_difference_year'"> - <dc:call-macro name="basedata_0"/> - <dc:call-macro name="basedata_1_additionals"/> - <dc:call-macro name="basedata_2_fixations"/> - <dc:call-macro name="basedata_3_officials"/> - <dc:call-macro name="annotations_per_type"/> - <dc:call-macro name="morph_width"/> - </dc:when> - <dc:when test="$out = 'bed_difference_epoch'"> - <dc:call-macro name="basedata_0"/> - <dc:call-macro name="basedata_1_additionals"/> - <dc:call-macro name="basedata_2_fixations"/> - <dc:call-macro name="basedata_3_officials"/> - <dc:call-macro name="annotations_per_type"/> - <dc:call-macro name="morph_width"/> - </dc:when> - <dc:when test="$out = 'floodmap'"> - <dc:choose> - <dc:when test="dc:contains($parameters, 'dem')"> - <dc:call-macro name="flood-map-dem"/> - </dc:when> - <dc:when test="dc:contains($parameters, 'hws')"> - <hws> - <dc:call-macro name="flood-map-hws-lines"/> - <dc:call-macro name="flood-map-hws-points"/> - </hws> - </dc:when> - <dc:otherwise> - <dc:call-macro name="flood-map-complete"/> - </dc:otherwise> - </dc:choose> - </dc:when> - <dc:when test="$out = 'floodmap-hws'"> - <dc:choose> - <dc:when test="dc:contains($parameters, 'dem')"> - <dc:call-macro name="flood-map-dem"/> - </dc:when> - <dc:when test="dc:contains($parameters, 'hws')"> - <hws> - <dc:call-macro name="flood-map-hws-lines"/> - <dc:call-macro name="flood-map-hws-points"/> - </hws> - </dc:when> - <dc:otherwise> - <dc:call-macro name="flood-map-complete"/> - </dc:otherwise> - </dc:choose> - </dc:when> - <dc:when test="$out = 'computed_discharge_curve'"> - <dc:call-macro name="discharge_computed"/> - <dc:call-macro name="basedata_2_fixations_wqkms"/> + <dc:filter expr="$hws_kind=1"> + <dc:if test="dc:has-result()"> + <Durchlass><dc:call-macro name="ddg_factory"/></Durchlass> + </dc:if> + </dc:filter> - <dc:call-macro name="basedata_5_flood-protections"/> - - <!-- former waterlevels --> - <dc:call-macro name="basedata_0"/> - - <dc:call-macro name="basedata_1_additionals"/> - - <!-- former flood-water-marks --> - <dc:call-macro name="basedata_4_heightmarks-points"/> - <computed_discharge_curve> - <dc:call-macro name="mainvalues"/> - </computed_discharge_curve> - </dc:when> - <dc:when test="$out = 'minfo-heights'"> - <dc:call-macro name="minfo-heights"/> - <dc:macro name="minfo-heights"> - <bedheights> - <dc:call-macro name="bed-heights-single"/> - <dc:call-macro name="bed-heights-epoch"/> - </bedheights> - </dc:macro> - </dc:when> - <dc:when test="$out = 'minfo-heights-epoch'"> - <bedheights> - <dc:call-macro name="bed-heights-epoch"/> - </bedheights> - </dc:when> - </dc:choose> - </dc:iterate> - </dc:otherwise> - </dc:choose> - - - <dc:if test="dc:contains($artifact-outs, 'floodmap') or dc:contains($artifact-outs, 'floodmap-hws')"> - <dc:macro name="flood-map-recommended"> - <dc:comment> - FIXME: Following two macros look identical to me. - </dc:comment> - <kilometrage> - <riveraxis factory="riveraxis" out="{$OUT}" ids="{$river_id}"/> - </kilometrage> - <rastermap> - <background factory="wmsbackground" out="{$OUT}" ids="{$river_id}"/> - </rastermap> - </dc:macro> + <dc:filter expr="$hws_kind=2"> + <dc:if test="dc:has-result()"> + <Damm><dc:call-macro name="ddg_factory"/></Damm> + </dc:if> + </dc:filter> - <dc:macro name="flood-map-dem"> - <dems> - <dc:context> - <dc:statement> - SELECT d.id AS dem_id, - r.a AS dem_lower, - r.b AS dem_upper, - d.name AS name, - t.start_time AS start_time, - t.stop_time AS stop_time, - 'Projektion: ' || d.projection || '$' || - 'Rasterweite: ' || d.resolution || 'm$' || - 'Format: ' || d.format || '$' || - 'Zeitraum: ' - AS info - FROM dem d - JOIN ranges r ON d.range_id = r.id - LEFT JOIN time_intervals t ON d.time_interval_id = t.id - WHERE d.river_id = ${river_id} - </dc:statement> - <dc:for-each> - <dem factory="demfactory" out="{$OUT}" - ids="{$dem_id}" - name="{$name}" - info="{dc:replace($info, '$', '<BR>')}{dc:date-format('yyyy', $start_time)} - {dc:date-format('yyyy', $stop_time)}"/> - </dc:for-each> - </dc:context> - </dems> - </dc:macro> + <dc:filter expr="$hws_kind=3"> + <dc:if test="dc:has-result()"> + <Graben><dc:call-macro name="ddg_factory"/></Graben> + </dc:if> + </dc:filter> + </dc:macro> - <dc:macro name="filter_hws_ddg"> - <dc:macro name="durchlass_damm_graben"> - <dc:macro name="ddg_factory"> - <dc:for-each> - <hws factory="hwsfactory" out="{$OUT}" name="{$hws_name}"/> - </dc:for-each> - </dc:macro> - - <dc:filter expr="$hws_kind=1"> - <dc:if test="dc:has-result()"> - <Durchlass><dc:call-macro name="ddg_factory"/></Durchlass> - </dc:if> - </dc:filter> - - <dc:filter expr="$hws_kind=2"> - <dc:if test="dc:has-result()"> - <Damm><dc:call-macro name="ddg_factory"/></Damm> - </dc:if> - </dc:filter> + <dc:filter expr="$hws_official=1"> + <dc:if test="dc:has-result()"> + <official> + <dc:call-macro name="durchlass_damm_graben"/> + </official> + </dc:if> + </dc:filter> - <dc:filter expr="$hws_kind=3"> - <dc:if test="dc:has-result()"> - <Graben><dc:call-macro name="ddg_factory"/></Graben> - </dc:if> - </dc:filter> - </dc:macro> + <dc:filter expr="$hws_official=0"> + <dc:if test="dc:has-result()"> + <inofficial> + <dc:call-macro name="durchlass_damm_graben"/> + </inofficial> + </dc:if> + </dc:filter> + </dc:macro> - <dc:filter expr="$hws_official=1"> - <dc:if test="dc:has-result()"> - <official> - <dc:call-macro name="durchlass_damm_graben"/> - </official> - </dc:if> - </dc:filter> + <dc:macro name="flood-map-hydr-boundaries-state"> + <federal> + <dc:context> + <dc:statement> + SELECT DISTINCT + name + FROM hydr_boundaries + WHERE river_id = ${river_id} + AND kind = 2 + </dc:statement> + <dc:for-each> + <line factory="wmshydrboundariesfactory" + ids="{$river_id};{$name};2" + name="{$name}"/> + </dc:for-each> + </dc:context> + <dc:context> + <dc:statement> + SELECT DISTINCT + name + FROM hydr_boundaries_poly + WHERE river_id = ${river_id} + AND kind = 2 + </dc:statement> + <dc:for-each> + <line factory="wmshydrboundariespolyfactory" + ids="{$river_id};{$name};2" + name="{$name}"/> + </dc:for-each> + </dc:context> + </federal> + </dc:macro> - <dc:filter expr="$hws_official=0"> - <dc:if test="dc:has-result()"> - <inofficial> - <dc:call-macro name="durchlass_damm_graben"/> - </inofficial> - </dc:if> - </dc:filter> - </dc:macro> + <dc:macro name="flood-map-hydr-boundaries-lines"> + <dc:context> + <dc:statement> + SELECT DISTINCT + name + FROM hydr_boundaries + WHERE river_id = ${river_id} + AND kind = 1 + </dc:statement> + <dc:comment> What about all other line kinds?</dc:comment> + <dc:if test="dc:has-result()"> + <lines> + <dc:for-each> + <line factory="wmshydrboundariesfactory" + ids="{$river_id};{$name};1" + name="{$name}"/> + </dc:for-each> + </lines> + </dc:if> + </dc:context> + </dc:macro> - <dc:macro name="flood-map-hws-lines"> + <dc:macro name="flood-map-hydr-boundaries-poly"> + <areas> + <dc:context> + <dc:statement> + SELECT DISTINCT + b.sectie AS sectie_id, + sk.name AS sectie + FROM hydr_boundaries_poly b + JOIN sectie_kinds sk ON b.sectie = sk.id + WHERE b.river_id = ${river_id} + AND b.kind = 1 + </dc:statement> + <dc:if test="dc:has-result()"> + <sobek_areas> + <dc:for-each> + <boundary name="{$sectie}" + factory="wmshydrboundariespolyfactory" + ids="{$river_id};{$sectie};1;{$sectie_id};-1"/> + </dc:for-each> + </sobek_areas> + </dc:if> + </dc:context> + <dc:context> + <dc:statement> + SELECT DISTINCT + b.sobek AS sobek_id, + sk.name AS sobek + FROM hydr_boundaries_poly b + JOIN sobek_kinds sk ON b.sobek = sk.id + WHERE b.river_id = ${river_id} + AND b.kind = 1 + </dc:statement> + <dc:if test="dc:has-result()"> + <sobek_flooded> + <dc:for-each> + <boundary name="{$sobek}" + factory="wmshydrboundariespolyfactory" + ids="{$river_id};{$sobek};1;-1;{$sobek_id}"/> + </dc:for-each> + </sobek_flooded> + </dc:if> + </dc:context> + <dc:context> + <dc:statement> + SELECT DISTINCT + b.name AS name + FROM hydr_boundaries_poly b + WHERE b.river_id = ${river_id} + AND b.kind = 1 + AND b.sobek IS NULL + AND b.sectie is NULL + </dc:statement> + <dc:for-each> + <boundary name="{$name}" + factory="wmshydrboundariespolyfactory" + ids="{$river_id};{$name}"/> + </dc:for-each> + </dc:context> + </areas> + </dc:macro> + + <dc:macro name="flood-map-uesk"> + <dc:context> + <dc:statement> + SELECT DISTINCT 1 FROM floodmaps WHERE river_id = ${river_id} + </dc:statement> + <dc:if test="dc:has-result()"> + <uesk> + <calculations> <dc:context> <dc:statement> - SELECT DISTINCT - name AS hws_name, - official AS hws_official, - kind_id AS hws_kind - FROM hws_lines - WHERE river_id = ${river_id} - </dc:statement> - <dc:if test="dc:has-result()"> - <lines> - <dc:call-macro name="filter_hws_ddg"/> - </lines> - </dc:if> - </dc:context> - </dc:macro> - - <dc:macro name="flood-map-hws-points"> - <dc:context> - <dc:statement> - SELECT DISTINCT - name AS hws_name, - official AS hws_official, - kind_id AS hws_kind - FROM hws_points - WHERE river_id = ${river_id} - </dc:statement> - <dc:if test="dc:has-result()"> - <points> - <dc:call-macro name="filter_hws_ddg"/> - </points> - </dc:if> - </dc:context> - </dc:macro> - - <dc:macro name="flood-map-km"> - <dc:context> - <dc:statement> - SELECT DISTINCT 1 FROM river_axes_km WHERE river_id = ${river_id} - </dc:statement> - <dc:for-each> - <kilometrage factory="wmskmfactory" out="{$OUT}" ids="{$river_id}"/> - </dc:for-each> - </dc:context> - </dc:macro> - - <dc:macro name="flood-map-qps"> - <dc:context> - <dc:comment>Grab only the actual first</dc:comment> - <dc:statement> - SELECT DISTINCT - cs.kind_id AS kind_id, - ck.name AS kind_name - FROM cross_section_tracks cs - JOIN cross_section_track_kinds ck on cs.kind_id = ck.id - WHERE river_id = ${river_id} - AND kind_id=1 - </dc:statement> - <dc:if test="dc:has-result()"> - <dc:for-each> - <actual description="{$kind_name}" - factory="wmsqpsfactory" out="{$OUT}" - ids="{$river_id};{$kind_name};{$kind_id}"/> - </dc:for-each> - </dc:if> - </dc:context> - <dc:context> - <dc:comment>Now the other tracks</dc:comment> - <dc:statement> - SELECT DISTINCT - cs.kind_id AS kind_id, - ck.name AS kind_name, - cs.name AS layer_name - FROM cross_section_tracks cs - JOIN cross_section_track_kinds ck on cs.kind_id = ck.id - WHERE river_id = ${river_id} - AND kind_id=0 - </dc:statement> - <dc:if test="dc:has-result()"> - <other> - <dc:for-each> - <misc-qps description="{$layer_name}" - factory="wmsqpsfactory" out="{$OUT}" - ids="{$river_id};{$layer_name};{$kind_id}"/> - </dc:for-each> - </other> - </dc:if> - </dc:context> - </dc:macro> - - <dc:macro name="flood-map-riveraxis"> - <dc:context> - <dc:statement> - SELECT DISTINCT - ax.kind_id AS kind_id, - ak.name AS kind_name - FROM river_axes ax - JOIN axis_kinds ak on ax.kind_id = ak.id - WHERE river_id = ${river_id} - AND kind_id=1 + SELECT DISTINCT 1 FROM floodmaps WHERE river_id = ${river_id} + AND (kind = 112 OR kind = 111) </dc:statement> <dc:if test="dc:has-result()"> - <dc:for-each> - <actual description="{$kind_name}" - ids="{$river_id};{$kind_name};{$kind_id}" - factory="riveraxis" out="{$OUT}"/> - </dc:for-each> - </dc:if> - </dc:context> - <dc:context> - <dc:statement> - SELECT DISTINCT - ak.name AS kind_name, - ax.kind_id AS kind_id, - ax.name AS layer_name - FROM river_axes ax - JOIN axis_kinds ak on ax.kind_id = ak.id - WHERE river_id = ${river_id} - AND kind_id <> 1 - </dc:statement> - <dc:if test="dc:has-result()"> - <other> - <dc:for-each> - <misc-axis description="{$layer_name}" - ids="{$river_id};{$layer_name};{$kind_id}" - factory="riveraxis" out="{$OUT}"/> - </dc:for-each> - </other> - </dc:if> - </dc:context> - </dc:macro> - - <dc:macro name="flood-map-hydr-boundaries-state"> - <dc:context> - <dc:statement> - SELECT DISTINCT - name - FROM hydr_boundaries - WHERE river_id = ${river_id} - AND kind = 2 - </dc:statement> - <dc:for-each> - <line factory="wmshydrboundariesfactory" out="{$OUT}" - ids="{$river_id};{$name};2" - name="{$name}"/> - </dc:for-each> - </dc:context> - <dc:context> - <dc:statement> - SELECT DISTINCT - name - FROM hydr_boundaries_poly - WHERE river_id = ${river_id} - AND kind = 2 - </dc:statement> - <dc:for-each> - <line factory="wmshydrboundariespolyfactory" out="{$OUT}" - ids="{$river_id};{$name};2" - name="{$name}"/> - </dc:for-each> - </dc:context> - </dc:macro> - - <dc:macro name="flood-map-hydr-boundaries-lines"> - <dc:context> - <dc:statement> - SELECT DISTINCT - name - FROM hydr_boundaries - WHERE river_id = ${river_id} - AND kind = 1 - </dc:statement> - <dc:comment> What about all other line kinds?</dc:comment> - <dc:if test="dc:has-result()"> - <lines> - <dc:for-each> - <line factory="wmshydrboundariesfactory" out="{$OUT}" - ids="{$river_id};{$name};1" - name="{$name}"/> - </dc:for-each> - </lines> - </dc:if> - </dc:context> - </dc:macro> - - <dc:macro name="flood-map-hydr-boundaries-poly"> - <dc:context> - <dc:statement> - SELECT DISTINCT - b.sectie AS sectie_id, - sk.name AS sectie - FROM hydr_boundaries_poly b - JOIN sectie_kinds sk ON b.sectie = sk.id - WHERE b.river_id = ${river_id} - AND b.kind = 1 - </dc:statement> - <dc:if test="dc:has-result()"> - <sobek_areas> - <dc:for-each> - <boundary name="{$sectie}" - factory="wmshydrboundariespolyfactory" out="{$OUT}" - ids="{$river_id};{$sectie};1;{$sectie_id};-1"/> - </dc:for-each> - </sobek_areas> - </dc:if> - </dc:context> - <dc:context> - <dc:statement> - SELECT DISTINCT - b.sobek AS sobek_id, - sk.name AS sobek - FROM hydr_boundaries_poly b - JOIN sobek_kinds sk ON b.sobek = sk.id - WHERE b.river_id = ${river_id} - AND b.kind = 1 - </dc:statement> - <dc:if test="dc:has-result()"> - <sobek_flooded> - <dc:for-each> - <boundary name="{$sobek}" - factory="wmshydrboundariespolyfactory" out="{$OUT}" - ids="{$river_id};{$sobek};1;-1;{$sobek_id}"/> - </dc:for-each> - </sobek_flooded> + <current> + <dc:context> + <dc:statement> + SELECT DISTINCT name AS name + FROM floodmaps + WHERE river_id = ${river_id} AND kind = 111 + </dc:statement> + <dc:if test="dc:has-result()"> + <bfg> + <dc:for-each> + <floodmaps factory="wmsfloodmapsfactory" + ids="{$river_id};{$name}" + name="{$name}"/> + </dc:for-each> + </bfg> + </dc:if> + </dc:context> + <dc:context> + <dc:statement> + SELECT DISTINCT name AS name + FROM floodmaps + WHERE river_id = ${river_id} AND kind = 112 + </dc:statement> + <dc:if test="dc:has-result()"> + <federal> + <dc:for-each> + <floodmaps factory="wmsfloodmapsfactory" + ids="{$river_id};{$name}" + name="{$name}"/> + </dc:for-each> + </federal> + </dc:if> + </dc:context> + </current> </dc:if> </dc:context> <dc:context> <dc:statement> - SELECT DISTINCT - b.name AS name - FROM hydr_boundaries_poly b - WHERE b.river_id = ${river_id} - AND b.kind = 1 - AND b.sobek IS NULL - AND b.sectie is NULL - </dc:statement> - <dc:for-each> - <boundary name="{$name}" - factory="wmshydrboundariespolyfactory" out="{$OUT}" - ids="{$river_id};{$name}"/> - </dc:for-each> - </dc:context> - </dc:macro> - - <dc:macro name="flood-map-hydr-boundaries"> - <bfg_model> - <areas> - <dc:call-macro name="flood-map-hydr-boundaries-poly"/> - </areas> - <dc:call-macro name="flood-map-hydr-boundaries-lines"/> - </bfg_model> - <federal> - <dc:call-macro name="flood-map-hydr-boundaries-state"/> - </federal> - </dc:macro> - - <dc:macro name="flood-map-floodplain"> - <floodplain> - <dc:context> - <dc:statement> - SELECT DISTINCT - fp.kind_id AS kind_id, - flk.name AS kind_name - FROM floodplain fp - JOIN floodplain_kinds flk on fp.kind_id = flk.id - WHERE river_id = ${river_id} - AND kind_id=1 - </dc:statement> - <dc:if test="dc:has-result()"> - <dc:for-each> - <floody factory="wmsfloodplainfactory" out="{$OUT}" - description="{$kind_name}" - ids="{$river_id};{$kind_name};{$kind_id}"/> - </dc:for-each> - </dc:if> - </dc:context> - <dc:context> - <dc:statement> - SELECT DISTINCT - flk.name AS kind_name, - fp.kind_id AS kind_id, - fp.name AS layer_name - FROM floodplain fp - JOIN floodplain_kinds flk on fp.kind_id = flk.id - WHERE river_id = ${river_id} - AND kind_id <> 1 - </dc:statement> - <dc:if test="dc:has-result()"> - <other> - <dc:for-each> - <floody factory="wmsfloodplainfactory" out="{$OUT}" - description="{$layer_name}" - ids="{$river_id};{$layer_name};{$kind_id}"/> - </dc:for-each> - </other> - </dc:if> - </dc:context> - </floodplain> - </dc:macro> - - <dc:macro name="hwslines_by_kind"> - <dc:comment> - Call from a context where fed_name hws_kind hws_name and river_id is - availble - </dc:comment> - - <dc:macro name="hwslines_by_kind_factory"> - <dc:for-each> - <hws factory="wmshwslinesfactory" out="{$OUT}" - ids="{$river_id};{$hws_name}" - name="{$hws_name}"/> - </dc:for-each> - </dc:macro> - - <dc:filter expr="$hws_kind=1"> - <dc:if test="dc:has-result()"> - <Durchlass> - <dc:call-macro name="hwslines_by_kind_factory"/> - </Durchlass> - </dc:if> - </dc:filter> - - <dc:filter expr="$hws_kind=2"> - <dc:if test="dc:has-result()"> - <Damm> - <dc:call-macro name="hwslines_by_kind_factory"/> - </Damm> - </dc:if> - </dc:filter> - - <dc:filter expr="$hws_kind=3"> - <dc:if test="dc:has-result()"> - <Graben> - <dc:call-macro name="hwslines_by_kind_factory"/> - </Graben> - </dc:if> - </dc:filter> - </dc:macro> - - <dc:macro name="hwslines"> - <hws_lines> - <official> - <dc:context> - <dc:statement> - SELECT DISTINCT - fs.name AS fed_name, - fs.id AS fed_id - FROM hws_lines hws - JOIN fed_states fs ON hws.fed_state_id = fs.id - WHERE river_id = ${river_id} - AND hws.official=1 - </dc:statement> - <dc:for-each> - <dc:context> - <dc:statement> - SELECT DISTINCT - name AS hws_name, - kind_id AS hws_kind - FROM hws_lines - WHERE river_id = ${river_id} - AND official=1 - AND fed_state_id = ${fed_id} ORDER BY name - </dc:statement> - <fedstate description="{$fed_name}"> - <dc:call-macro name="hwslines_by_kind"/> - </fedstate> - </dc:context> - </dc:for-each> - </dc:context> - <dc:context> - <dc:statement> - SELECT distinct - name AS hws_name, - kind_id AS hws_kind - FROM hws_lines - WHERE river_id = ${river_id} - AND official=1 - AND fed_state_id IS NULL - ORDER BY name - </dc:statement> - <hws_fed_unknown> - <dc:call-macro name="hwslines_by_kind"/> - </hws_fed_unknown> - </dc:context> - </official> - <inofficial> - <dc:context> - <dc:statement> - SELECT DISTINCT - fs.name AS fed_name, - fs.id AS fed_id - FROM hws_lines hws - JOIN fed_states fs ON hws.fed_state_id = fs.id - WHERE river_id = ${river_id} - AND hws.official=0 - </dc:statement> - <dc:for-each> - <dc:context> - <dc:statement> - SELECT DISTINCT - name AS hws_name, - kind_id AS hws_kind - FROM hws_lines - WHERE river_id = ${river_id} - AND official=0 - AND fed_state_id = ${fed_id} ORDER BY name - </dc:statement> - <fedstate description="{$fed_name}"> - <dc:call-macro name="hwslines_by_kind"/> - </fedstate> - </dc:context> - </dc:for-each> - </dc:context> - <dc:context> - <dc:statement> - SELECT distinct - name AS hws_name, - kind_id AS hws_kind - FROM hws_lines - WHERE river_id = ${river_id} - AND official=0 - AND fed_state_id IS NULL ORDER BY name - </dc:statement> - <hws_fed_unknown> - <dc:call-macro name="hwslines_by_kind"/> - </hws_fed_unknown> - </dc:context> - </inofficial> - </hws_lines> - </dc:macro> - - <dc:macro name="hwspoints_by_kind"> - <dc:comment> - Call from a context where fed_name hws_kind hws_name and river_id is - availble - </dc:comment> - - <dc:macro name="hwspoints_by_kind_factory"> - <dc:for-each> - <hws factory="wmshwspointsfactory" out="{$OUT}" - ids="{$river_id};{$hws_name}" - name="{$hws_name}"/> - </dc:for-each> - </dc:macro> - - <dc:filter expr="$hws_kind=1"> - <dc:if test="dc:has-result()"> - <Durchlass> - <dc:call-macro name="hwspoints_by_kind_factory"/> - </Durchlass> - </dc:if> - </dc:filter> - - <dc:filter expr="$hws_kind=2"> - <dc:if test="dc:has-result()"> - <Damm> - <dc:call-macro name="hwspoints_by_kind_factory"/> - </Damm> - </dc:if> - </dc:filter> - - <dc:filter expr="$hws_kind=3"> - <dc:if test="dc:has-result()"> - <Graben> - <dc:call-macro name="hwspoints_by_kind_factory"/> - </Graben> - </dc:if> - </dc:filter> - </dc:macro> - - <dc:macro name="hwspoints"> - <hws_points> - <official> - <dc:context> - <dc:statement> - SELECT DISTINCT - fs.name AS fed_name, - fs.id AS fed_id - FROM hws_points hws - JOIN fed_states fs ON hws.fed_state_id = fs.id - WHERE river_id = ${river_id} - AND hws.official=1 - </dc:statement> - <dc:for-each> - <dc:context> - <dc:statement> - SELECT DISTINCT - name AS hws_name, - kind_id AS hws_kind - FROM hws_points - WHERE river_id = ${river_id} - AND official=1 - AND fed_state_id = ${fed_id} ORDER BY name - </dc:statement> - <fedstate description="{$fed_name}"> - <dc:call-macro name="hwspoints_by_kind"/> - </fedstate> - </dc:context> - </dc:for-each> - </dc:context> - <dc:context> - <dc:statement> - SELECT distinct - name AS hws_name, - kind_id AS hws_kind - FROM hws_points - WHERE river_id = ${river_id} - AND official=1 - AND fed_state_id IS NULL - ORDER BY name - </dc:statement> - <hws_fed_unknown> - <dc:call-macro name="hwspoints_by_kind"/> - </hws_fed_unknown> - </dc:context> - </official> - <inofficial> - <dc:context> - <dc:statement> - SELECT DISTINCT - fs.name AS fed_name, - fs.id AS fed_id - FROM hws_points hws - JOIN fed_states fs ON hws.fed_state_id = fs.id - WHERE river_id = ${river_id} - AND hws.official=0 - </dc:statement> - <dc:for-each> - <dc:context> - <dc:statement> - SELECT DISTINCT - name AS hws_name, - kind_id AS hws_kind - FROM hws_points - WHERE river_id = ${river_id} - AND official=0 - AND fed_state_id = ${fed_id} ORDER BY name - </dc:statement> - <fedstate description="{$fed_name}"> - <dc:call-macro name="hwspoints_by_kind"/> - </fedstate> - </dc:context> - </dc:for-each> - </dc:context> - <dc:context> - <dc:statement> - SELECT distinct - name AS hws_name, - kind_id AS hws_kind - FROM hws_points - WHERE river_id = ${river_id} - AND official=0 - AND fed_state_id IS NULL ORDER BY name - </dc:statement> - <hws_fed_unknown> - <dc:call-macro name="hwspoints_by_kind"/> - </hws_fed_unknown> - </dc:context> - </inofficial> - </hws_points> - </dc:macro> - - <dc:macro name="flood-map-buildings"> - <dc:context> - <dc:statement> - SELECT DISTINCT - b.kind_id AS building_kind_id, - bk.name AS building_kind - FROM buildings b - JOIN building_kinds bk ON b.kind_id = bk.id - WHERE b.river_id = ${river_id} - AND b.kind_id <> 0 - </dc:statement> - <dc:for-each> - <buildings description="{$building_kind}" - factory="wmsbuildingsfactory" out="{$OUT}" - ids="{$river_id};{$building_kind};{$building_kind_id}"/> - </dc:for-each> - </dc:context> - <dc:context> - <dc:statement> - SELECT DISTINCT - b.name AS building_name, - bk.name AS building_kind, - b.kind_id AS building_kind_id - FROM buildings b - JOIN building_kinds bk ON b.kind_id = bk.id - WHERE river_id = ${river_id} - AND kind_id = 0 + SELECT DISTINCT 1 from floodmaps where river_id = ${river_id} + AND (kind = 122 OR kind = 121) </dc:statement> <dc:if test="dc:has-result()"> - <other> - <dc:for-each> - <buildings description="{$building_name}" - factory="wmsbuildingsfactory" out="{$OUT}" - ids="{$river_id};{$building_name}"/> - </dc:for-each> - </other> - </dc:if> - </dc:context> - <dc:context> - <dc:statement> - SELECT DISTINCT - j.kind_id AS jetty_kind_id, - jk.name AS jetty_kind - FROM jetties j - JOIN jetty_kinds jk ON j.kind_id = jk.id - WHERE river_id = ${river_id} - </dc:statement> - <dc:if test="dc:has-result()"> - <jetties> - <dc:for-each> - <jetty description="{$jetty_kind}" - factory="wmsjettiesfactory" out="{$OUT}" - ids="{$river_id};{$jetty_kind};{$jetty_kind_id}"/> - </dc:for-each> - </jetties> - </dc:if> - </dc:context> - </dc:macro> - - <dc:macro name="flood-map-fixpoints"> - <dc:context> - <dc:statement> - SELECT name AS name - FROM fixpoints WHERE river_id = ${river_id} GROUP BY name - </dc:statement> - <dc:for-each> - <fixpoints factory="wmsfixpointsfactory" out="{$OUT}" - ids="{$river_id};{$name}"/> - </dc:for-each> - </dc:context> - </dc:macro> - - <dc:macro name="flood-map-gaugelocations"> - <gauge_points factory="externalwmsfactory" out="{$OUT}" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;Pegelpunkte;Pegelpunkte (WSV)"/> - <gauge_names factory="externalwmsfactory" out="{$OUT}" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;Pegelnamen;Pegelnamen (WSV)"/> - <gauge_level factory="externalwmsfactory" out="{$OUT}" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;Pegelwasserstand;Aktueller Wasserstand (WSV)"/> - <gauge_tendency factory="externalwmsfactory" out="{$OUT}" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;TendenzWasserstand;Tendenz des Wasserstands (WSV)"/> - </dc:macro> - - <dc:macro name="flood-map-uesk"> - <dc:context> - <dc:statement> - SELECT DISTINCT 1 from floodmaps where river_id = ${river_id} - </dc:statement> - <dc:if test="dc:has-result()"> - <uesk> - <calculations> + <potential> <dc:context> <dc:statement> - SELECT DISTINCT 1 from floodmaps where river_id = ${river_id} - AND (kind = 112 OR kind = 111) + SELECT DISTINCT name AS name + FROM floodmaps + WHERE river_id = ${river_id} AND kind = 121 </dc:statement> <dc:if test="dc:has-result()"> - <current> - <dc:context> - <dc:statement> - SELECT DISTINCT name AS name - FROM floodmaps - WHERE river_id = ${river_id} AND kind = 111 - </dc:statement> - <dc:if test="dc:has-result()"> - <bfg> - <dc:for-each> - <floodmaps factory="wmsfloodmapsfactory" out="{$OUT}" - ids="{$river_id};{$name}" - name="{$name}"/> - </dc:for-each> - </bfg> - </dc:if> - </dc:context> - <dc:context> - <dc:statement> - SELECT DISTINCT name AS name - FROM floodmaps - WHERE river_id = ${river_id} AND kind = 112 - </dc:statement> - <dc:if test="dc:has-result()"> - <federal> - <dc:for-each> - <floodmaps factory="wmsfloodmapsfactory" out="{$OUT}" - ids="{$river_id};{$name}" - name="{$name}"/> - </dc:for-each> - </federal> - </dc:if> - </dc:context> - </current> + <bfg> + <dc:for-each> + <floodmaps factory="wmsfloodmapsfactory" + ids="{$river_id};{$name}" + name="{$name}"/> + </dc:for-each> + </bfg> </dc:if> </dc:context> <dc:context> <dc:statement> - SELECT DISTINCT 1 from floodmaps where river_id = ${river_id} - AND (kind = 122 OR kind = 121) + SELECT DISTINCT + name AS name + FROM floodmaps + WHERE river_id = ${river_id} AND kind = 122 </dc:statement> <dc:if test="dc:has-result()"> - <potential> - <dc:context> - <dc:statement> - SELECT DISTINCT name AS name - FROM floodmaps - WHERE river_id = ${river_id} AND kind = 121 - </dc:statement> - <dc:if test="dc:has-result()"> - <bfg> - <dc:for-each> - <floodmaps factory="wmsfloodmapsfactory" out="{$OUT}" - ids="{$river_id};{$name}" - name="{$name}"/> - </dc:for-each> - </bfg> - </dc:if> - </dc:context> - <dc:context> - <dc:statement> - SELECT DISTINCT - name AS name - FROM floodmaps - WHERE river_id = ${river_id} AND kind = 122 - </dc:statement> - <dc:if test="dc:has-result()"> - <federal> - <dc:for-each> - <floodmaps factory="wmsfloodmapsfactory" out="{$OUT}" - ids="{$river_id};{$name}" - name="{$name}"/> - </dc:for-each> - </federal> - </dc:if> - </dc:context> - </potential> + <federal> + <dc:for-each> + <floodmaps factory="wmsfloodmapsfactory" + ids="{$river_id};{$name}" + name="{$name}"/> + </dc:for-each> + </federal> </dc:if> </dc:context> - </calculations> - <dc:context> - <dc:statement> - SELECT DISTINCT - source AS source - FROM floodmaps - WHERE river_id = ${river_id} AND kind = 200 - </dc:statement> - <dc:if test="dc:has-result()"> - <measurements> - <dc:for-each> - <year name="{$source}"> - <dc:context> - <dc:statement> - SELECT DISTINCT - name AS name - FROM floodmaps - WHERE river_id = ${river_id} AND kind = 200 AND source = - ${source} - </dc:statement> - <dc:for-each> - <floodmaps factory="wmsfloodmapsfactory" out="{$OUT}" - ids="{$river_id};{$name}" - name="{$name}"/> - </dc:for-each> - </dc:context> - </year> - </dc:for-each> - </measurements> - </dc:if> - </dc:context> - </uesk> - </dc:if> - </dc:context> - </dc:macro> - - <dc:macro name="flood-map-routing"> - <qps> - <dc:call-macro name="flood-map-qps"/> - </qps> - <dc:call-macro name="flood-map-fixpoints"/> - <dc:call-macro name="flood-map-km"/> - <axis> - <dc:call-macro name="flood-map-riveraxis"/> - </axis> - </dc:macro> - - <dc:macro name="floodmarks"> - <dc:context> - <dc:statement> - SELECT DISTINCT - coalesce(CAST (year AS VARCHAR(64)), 'Unbekanntes Jahr') as year - FROM flood_marks - WHERE river_id = ${river_id} - </dc:statement> - <dc:if test="dc:has-result()"> - <floodmarks> - <dc:for-each> - <floodmark name="{$year}" - factory="wmsfloodmarkfactory" out="{$OUT}" - ids="{$river_id};{$year};{$year}"/> - </dc:for-each> - </floodmarks> + </potential> </dc:if> </dc:context> - </dc:macro> - - <dc:macro name="flood-map-complete"> - <buildings> - <dc:call-macro name="flood-map-buildings"/> - </buildings> - <catchments> - <catchment_wms factory="externalwmsfactory" out="{$OUT}" - ids="http://geoportal.bafg.de/wmsproxy/INSPIRE/DrainageBasin;HY.PHYSICALWATERS.CATCHMENTS;Einzugsgebiete (WMS)" /> - <gaugelocations> - <dc:call-macro name="flood-map-gaugelocations"/> - </gaugelocations> - </catchments> - <dc:call-macro name="floodmarks"/> - <hws> - <dc:call-macro name="hwslines"/> - <dc:call-macro name="hwspoints"/> - </hws> - <route_data> - <dc:call-macro name="flood-map-routing"/> - </route_data> - <hydrboundaries> - <dc:call-macro name="flood-map-floodplain"/> - <dc:call-macro name="flood-map-hydr-boundaries"/> - </hydrboundaries> - <dc:call-macro name="flood-map-uesk"/> - </dc:macro> - - </dc:if> - - <dc:macro name="bed-heights-single"> - <single> - <dc:context> - <dc:statement> - SELECT id AS bedh_id, - year AS bedh_year, - description AS bedh_descr - FROM bed_height_single WHERE river_id = ${river_id} - </dc:statement> - <dc:for-each> - <height factory="bedheight" out="{$OUT}" - ids="bedheight-single-{$bedh_id}-{$bedh_year}" - description="{$bedh_descr}"/> - </dc:for-each> - </dc:context> - </single> - </dc:macro> - - <dc:macro name="bed-heights-epoch"> - <epoch> - <dc:context> - <dc:statement> - SELECT id AS bedh_id, - time_interval_id AS bedh_interval_id, - description AS bedh_descr - FROM bed_height_epoch WHERE river_id = ${river_id} - </dc:statement> - <dc:for-each> - <height factory="bedheight" out="{$OUT}" - ids="bedheight-epoch-{$bedh_id}-{$bedh_interval_id}" - description="{$bedh_descr}"/> - </dc:for-each> - </dc:context> - </epoch> - </dc:macro> - - </dc:for-each> - </dc:context> - </dc:macro> - - <dc:choose> - <dc:comment> - User specific part - ------------------ - </dc:comment> - <dc:when test="dc:contains($parameters, 'user-id') and - not(dc:contains($artifact-outs, 'floodmap-hws'))"> - - <old_calculations> - - <dc:comment><!-- <dc:macro name="load-user">--></dc:comment> - <dc:call-macro name="user-range"> - <dc:context connection="user"> - <dc:comment> Get the user and collection-id. </dc:comment> + </calculations> + <dc:context> <dc:statement> - SELECT u.id AS user_id, c.id AS collection_id, c.name AS collection_name - FROM collections c JOIN users u ON c.user_id = u.id - WHERE u.gid = CAST(${user-id} AS uuid) - ORDER BY c.creation DESC + SELECT DISTINCT + source AS source + FROM floodmaps + WHERE river_id = ${river_id} AND kind = 200 </dc:statement> - - <dc:macro name="range-filter"> - <dc:statement> - SELECT m.id AS a_id, - m.state AS a_state, - m.gid AS a_gid, - m.creation AS a_creation, - COALESCE(ld_mode, '') AS ld_m, - COALESCE(ld_locations, '') AS ld_l, - COALESCE(ld_from, '') AS ld_f, - COALESCE(ld_to, '') AS ld_t - FROM master_artifacts_range m - WHERE m.collection_id = ${collection_id} AND m.gid <> CAST(${artifact-id} AS uuid) - AND EXISTS ( - SELECT id FROM artifact_data ad WHERE ad.artifact_id = m.id AND k = 'river' AND v = ${river}) - </dc:statement> - <dc:for-each> - <dc:variable name="from" type="number" expr="dc:fromValue($ld_m, $ld_l, $ld_f)"/> - <dc:variable name="to" type="number" expr="dc:toValue($ld_m, $ld_l, $ld_t)"/> - <dc:if test="($from >= $fromkm and $from <= $tokm) or ($to <= $tokm and $to >= $fromkm) or ($from <= $fromkm and $to >= $tokm)"> - <dc:macro-body/> - </dc:if> - </dc:for-each> - </dc:macro> - - <!-- OFFICIAL LINES --> - <dc:macro name="officiallines_user"> - <dc:comment comment=".wst -------------------------------"/> - <officiallines> + <dc:if test="dc:has-result()"> + <measurements> <dc:for-each> - <dc:context> - <dc:statement> - SELECT m.id AS a_id, - m.state AS a_state, - m.gid AS a_gid, - m.creation AS a_creation, - ardg.v AS gaugy, - arv.v AS wqsingle - FROM master_artifacts m, - artifact_data ardg, - artifact_data arv - WHERE m.collection_id = ${collection_id} - AND m.gid = CAST(${artifact-id} AS uuid) - AND ardg.artifact_id = m.id - AND ardg.k = 'ld_gaugename' - AND arv.artifact_id = m.id - AND arv.k = 'wq_single' - AND EXISTS ( - SELECT id - FROM artifact_data ad - WHERE ad.artifact_id = m.id - AND k = 'river' - AND v = ${river}) - </dc:statement> - <dc:for-each> - <dc:context connection="system"> - <dc:statement> - SELECT ol.wst_id AS wstid, ol.wst_column_pos AS wstcolpos, ol.name AS olname, ol.value AS oval - FROM official_q_values ol - WHERE ol.value = CAST(${wqsingle} AS NUMERIC(10,2)) AND ol.gauge_name = ${gaugy} - </dc:statement> - <dc:for-each> - <dc:element name="${olname}"> - <dc:attribute name="name" value="${olname}"/> - <dc:attribute name="ids" value="additionals-wstv-${wstcolpos}-${wstid}"/> - <dc:attribute name="factory" value="staticwkms"/> - <dc:attribute name="out" value="${out}"/> - </dc:element> - </dc:for-each> - </dc:context> - </dc:for-each> - </dc:context> - </dc:for-each> - </officiallines> - </dc:macro> - <!-- END OFFICIAL LINES --> - - <dc:comment> - SHOW W-DIFFERENCES - </dc:comment> - - <dc:macro name="differences"> - <differences> - <dc:for-each> - <dc:context> - <dc:call-macro name="range-filter"> - <dc:context> - <dc:statement> - SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description - FROM outs AS o, facets AS f, artifacts AS a - WHERE f.name = 'w_differences' and f.out_id = o.id and o.artifact_id = ${a_id} and a.id = ${a_id} - </dc:statement> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="factory" value="winfo"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="artifact-id" value="${aid}"/> - <dc:attribute name="ids" value="${aid}"/> - <dc:attribute name="out" value="w_differences"/> - </dc:element> - </dc:for-each> - </dc:context> - </dc:call-macro> - </dc:context> - </dc:for-each> - </differences> - </dc:macro> - - <dc:comment> - SHOW REFERENCE CURVE - </dc:comment> - - <dc:macro name="reference-curves"> - <reference_curves> - <dc:for-each> - <dc:context> - <dc:call-macro name="user-range"> - <dc:context> - <dc:statement> - SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description - FROM outs AS o, facets AS f, artifacts AS a - WHERE f.name = 'reference_curve' and f.out_id = o.id and o.artifact_id = ${a_id} and a.id = ${a_id} - </dc:statement> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="factory" value="winfo"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="artifact-id" value="${aid}"/> - <dc:attribute name="ids" value="${aid}"/> - <dc:attribute name="out" value="reference_curve"/> - </dc:element> - </dc:for-each> - </dc:context> - </dc:call-macro> - </dc:context> - </dc:for-each> - </reference_curves> - </dc:macro> - - <dc:comment> - SHOW COMPUTED DISCHARGE CURVES - </dc:comment> - - <dc:macro name="computed-discharge-curve"> - <computed_discharge_curves> - <dc:for-each> - <dc:context> - <dc:call-macro name="range-filter"> - <dc:context> - <dc:statement> - SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description - FROM outs AS o, facets AS f, artifacts AS a - WHERE f.name = 'computed_discharge_curve.q' and f.out_id = o.id and o.artifact_id = ${a_id} and a.id = ${a_id} - </dc:statement> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="factory" value="winfo"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="artifact-id" value="${aid}"/> - <dc:attribute name="ids" value="${aid}"/> - <dc:attribute name="out" value="computed_discharge_curve"/> - </dc:element> - </dc:for-each> - </dc:context> - </dc:call-macro> - </dc:context> - </dc:for-each> - </computed_discharge_curves> - </dc:macro> - - <dc:comment> - CROSS SECTION - </dc:comment> - - <dc:macro name="waterlevels"> - <waterlevels> - <dc:for-each> - <dc:context> - <dc:call-macro name="range-filter"> - <dc:context> - <dc:statement> - SELECT id AS out_id - FROM outs - WHERE artifact_id = ${a_id} AND name = 'cross_section' - </dc:statement> - <dc:for-each> - <dc:context> - <dc:statement> - SELECT name AS facet_name, num AS facet_num, description AS facet_description - FROM facets - WHERE out_id = ${out_id} - ORDER BY num ASC, name DESC - </dc:statement> - <longitudinal_section_columns description="{$river} {$a_creation}"> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="ids" value="${facet_num}"/> - <dc:attribute name="factory" value="winfo"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="artifact-id" value="${a_gid}"/> - <dc:attribute name="out" value="cross_section"/> - </dc:element> - </dc:for-each> - </longitudinal_section_columns> - </dc:context> - </dc:for-each> - </dc:context> - </dc:call-macro> - </dc:context> - </dc:for-each> - </waterlevels> - </dc:macro> - - <dc:macro name="longitudinal"> - <waterlevels> - <dc:for-each> - <dc:context> - <dc:call-macro name="range-filter"> - <dc:context> - <dc:statement> - SELECT id AS out_id - FROM outs - WHERE artifact_id = ${a_id} AND name = 'longitudinal_section' - </dc:statement> - <dc:for-each> - <dc:context> - <dc:statement> - SELECT name AS facet_name, num AS facet_num, description AS facet_description - FROM facets - WHERE out_id = ${out_id} - ORDER BY num ASC, name DESC - </dc:statement> - <longitudinal_section_columns description="{$river} {$a_creation}"> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="ids" value="${facet_num}"/> - <dc:attribute name="factory" value="winfo"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="artifact-id" value="${a_gid}"/> - <dc:attribute name="out" value="longitudinal_section"/> - </dc:element> - </dc:for-each> - </longitudinal_section_columns> - </dc:context> - </dc:for-each> - </dc:context> - </dc:call-macro> - </dc:context> + <year name="{$source}"> + <dc:context> + <dc:statement> + SELECT DISTINCT + name AS name + FROM floodmaps + WHERE river_id = ${river_id} AND kind = 200 AND source = + ${source} + </dc:statement> + <dc:for-each> + <floodmaps factory="wmsfloodmapsfactory" + ids="{$river_id};{$name}" + name="{$name}"/> + </dc:for-each> + </dc:context> + </year> </dc:for-each> - </waterlevels> - </dc:macro> + </measurements> + </dc:if> + </dc:context> + </uesk> + </dc:if> + </dc:context> + </dc:macro> - <dc:macro name="longitudinal-section"> - <waterlevels> - <dc:for-each> - <dc:context> - <dc:call-macro name="range-filter"> - <dc:context> - <dc:statement> - SELECT id AS out_id - FROM outs - WHERE artifact_id = ${a_id} AND name = 'fix_longitudinal_section_curve' - </dc:statement> - <dc:for-each> - <dc:context> - <dc:comment><!-- average und deviation ls_0 . ls_1 ...--></dc:comment> - <dc:statement> - SELECT name AS facet_name, num AS facet_num, description AS facet_description - FROM facets - WHERE out_id = ${out_id} AND ( - name LIKE 'fix_deviation_ls%' OR - name LIKE 'fix_sector_average_ls%' OR - name LIKE 'fix_analysis_events_ls%' OR - name LIKE 'fix_reference_events_ls%' ) - ORDER BY num ASC, name DESC - </dc:statement> - <waterlevels description="{$river} {$a_creation} {$collection_name}"> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="ids" value="${facet_num}"/> - <dc:attribute name="factory" value="fixanalysis"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="artifact-id" value="${a_gid}"/> - <dc:attribute name="out" value="fix_longitudinal_section_curve"/> - </dc:element> - </dc:for-each> - </waterlevels> - </dc:context> - </dc:for-each> - </dc:context> - </dc:call-macro> - </dc:context> - </dc:for-each> - </waterlevels> - </dc:macro> - - <dc:macro name="delta-wt"> - <waterlevels> + <dc:macro name="flood-map-floodplain"> + <dc:context> + <dc:statement> + SELECT DISTINCT + fp.kind_id AS kind_id, + flk.name AS kind_name + FROM floodplain fp + JOIN floodplain_kinds flk on fp.kind_id = flk.id + WHERE river_id = ${river_id} + AND kind_id=1 + </dc:statement> + <dc:if test="dc:has-result()"> + <floodplain> + <dc:filter expr="$kind_id=1"> + <dc:for-each> + <floody factory="wmsfloodplainfactory" + description="{$kind_name}" + ids="{$river_id};{$kind_name};{$kind_id}"/> + </dc:for-each> + </dc:filter> + <dc:filter expr="kind_id!=1"> + <other> <dc:for-each> - <dc:context> - <dc:call-macro name="range-filter"> - <dc:context> - <dc:statement> - SELECT id AS out_id - FROM outs - WHERE artifact_id = ${a_id} AND name = 'fix_deltawt_curve' - </dc:statement> - <dc:for-each> - <dc:context> - <dc:statement> - SELECT name AS facet_name, num AS facet_num, description AS facet_description - FROM facets - WHERE out_id = ${out_id} and ( - name LIKE 'fix_sector_average_dwt%' OR - name LIKE 'fix_deviation_dwt%' OR - name = 'fix_analysis_events_dwt' OR - name = 'fix_reference_events_dwt' OR - name = 'fix_analysis_periods_dwt' ) - ORDER BY num ASC, name DESC - </dc:statement> - <waterlevels description="{$river} {$a_creation} {$collection_name}"> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="ids" value="${facet_num}"/> - <dc:attribute name="factory" value="fixanalysis"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="artifact-id" value="${a_gid}"/> - <dc:attribute name="out" value="fix_deltawt_curve"/> - </dc:element> - </dc:for-each> - </waterlevels> - </dc:context> - </dc:for-each> - </dc:context> - </dc:call-macro> - </dc:context> - </dc:for-each> - </waterlevels> - </dc:macro> - - <dc:macro name="delta-wt-ls"> - <waterlevels> - <dc:for-each> - <dc:context> - <dc:call-macro name="range-filter"> - <dc:context> - <dc:statement> - SELECT id AS out_id - FROM outs - WHERE artifact_id = ${a_id} AND name = 'fix_deltawt_curve' - </dc:statement> - <dc:for-each> - <dc:context> - <dc:statement> - SELECT name AS facet_name, num AS facet_num, description AS facet_description - FROM facets - WHERE out_id = ${out_id} and ( - name LIKE 'fix_sector_average_dwt%' OR - name LIKE 'fix_deviation_dwt%') - ORDER BY num ASC, name DESC - </dc:statement> - <waterlevels description="{$river} {$a_creation} {$collection_name}"> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="ids" value="${facet_num}"/> - <dc:attribute name="factory" value="fixanalysis"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="artifact-id" value="${a_gid}"/> - <dc:attribute name="out" value="fix_deltawt_curve"/> - </dc:element> - </dc:for-each> - </waterlevels> - </dc:context> - </dc:for-each> - </dc:context> - </dc:call-macro> - </dc:context> - </dc:for-each> - </waterlevels> - </dc:macro> - - <dc:macro name="fix-derivate-curve"> - <waterlevels> - <dc:for-each> - <dc:context> - <dc:call-macro name="range-filter"> - <dc:context> - <dc:statement> - SELECT id AS out_id - FROM outs - WHERE artifact_id = ${a_id} AND name = 'fix_derivate_curve' - </dc:statement> - <dc:for-each> - <dc:context> - <dc:statement> - SELECT name AS facet_name, num AS facet_num, description AS facet_description - FROM facets - WHERE out_id = ${out_id} and name = 'fix_derivate_curve' - ORDER BY num ASC, name DESC - </dc:statement> - <waterlevels description="{$river} {$a_creation} {$collection_name}"> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="ids" value="${facet_num}"/> - <dc:attribute name="factory" value="fixanalysis"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="artifact-id" value="${a_gid}"/> - <dc:attribute name="out" value="fix_derivate_curve"/> - </dc:element> - </dc:for-each> - </waterlevels> - </dc:context> - </dc:for-each> - </dc:context> - </dc:call-macro> - </dc:context> + <floody factory="wmsfloodplainfactory" + description="{$layer_name}" + ids="{$river_id};{$layer_name};{$kind_id}"/> </dc:for-each> - </waterlevels> - </dc:macro> - - <dc:macro name="fix-wq-curve"> - <waterlevels> - <dc:for-each> - <dc:context> - <dc:call-macro name="range-filter"> - <dc:context> - <dc:statement> - SELECT id AS out_id - FROM outs - WHERE artifact_id = ${a_id} AND name = 'fix_wq_curve' - </dc:statement> - <dc:for-each> - <dc:context> - <dc:statement> - SELECT name AS facet_name, num AS facet_num, description AS facet_description - FROM facets - WHERE out_id = ${out_id} and ( - name LIKE 'fix_sector_average_wq%' OR - name = 'fix_wq_curve' OR - name LIKE 'fix_analysis_events_wq%' OR - name LIKE 'fix_reference_events_wq%' ) - ORDER BY num ASC, name DESC - </dc:statement> - <waterlevels description="{$river} {$a_creation} {$collection_name}"> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="ids" value="${facet_num}"/> - <dc:attribute name="factory" value="fixanalysis"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="artifact-id" value="${a_gid}"/> - <dc:attribute name="out" value="fix_wq_curve"/> - </dc:element> - </dc:for-each> - </waterlevels> - </dc:context> - </dc:for-each> - </dc:context> - </dc:call-macro> - </dc:context> - </dc:for-each> - </waterlevels> - </dc:macro> - - <dc:macro name="duration-curve"> - <computed_discharge_curves> - <dc:for-each> - <dc:context> - <dc:call-macro name="range-filter"> - <dc:context> - <dc:statement> - SELECT a.gid AS aid, - f.id AS fid, - f.name AS facet_name, - f.num AS facet_num, - f.description AS facet_description - FROM outs AS o, facets AS f, artifacts AS a - WHERE - (f.name = 'duration_curve.q' OR f.name = 'duration_curve.w') AND - f.out_id = o.id AND - o.artifact_id = ${a_id} AND - a.id = ${a_id} - </dc:statement> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="factory" value="winfo"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="artifact-id" value="${aid}"/> - <dc:attribute name="ids" value="${aid}"/> - <dc:attribute name="out" value="duration_curve"/> - </dc:element> - </dc:for-each> - </dc:context> - </dc:call-macro> - </dc:context> - </dc:for-each> - </computed_discharge_curves> - </dc:macro> + </other> + </dc:filter> + </floodplain> + </dc:if> + </dc:context> + </dc:macro> - <dc:comment> - WATERLEVELS - ONLY SHOW Ws - </dc:comment> - - <dc:comment><!-- TODO doesnt work nicely for fix/wq-diags. --></dc:comment> + <dc:macro name="hwspoints_by_kind"> + <dc:comment> + Call from a context where fed_name hws_kind hws_name and river_id is + availble + </dc:comment> - <dc:macro name="waterlevels-fix"> - <waterlevels> - <dc:for-each> - <dc:context> - <dc:call-macro name="range-filter"> - <dc:context> - <dc:statement> - SELECT id AS out_id - FROM outs - WHERE artifact_id = ${a_id} AND name = 'longitudinal_section' - </dc:statement> - <dc:for-each> - <dc:context> - <dc:statement> - SELECT name AS facet_name, num AS facet_num, description AS facet_description - FROM facets - WHERE out_id = ${out_id} and name = 'longitudinal_section.w' - ORDER BY num ASC, name DESC - </dc:statement> - <waterlevels description="{$river} {$a_creation} {$collection_name}"> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="ids" value="${facet_num}"/> - <dc:attribute name="factory" value="winfo"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="artifact-id" value="${a_gid}"/> - <dc:attribute name="out" value="longitudinal_section"/> - </dc:element> - </dc:for-each> - </waterlevels> - </dc:context> - </dc:for-each> - </dc:context> - </dc:call-macro> - </dc:context> - </dc:for-each> - </waterlevels> - </dc:macro> + <dc:macro name="hwspoints_by_kind_factory"> + <dc:for-each> + <hws factory="wmshwspointsfactory" + ids="{$river_id};{$hws_name}" + name="{$hws_name}"/> + </dc:for-each> + </dc:macro> - <dc:comment> - SHOW FLOODMAPS - </dc:comment> + <dc:filter expr="$hws_kind=1"> + <dc:if test="dc:has-result()"> + <Durchlass> + <dc:call-macro name="hwspoints_by_kind_factory"/> + </Durchlass> + </dc:if> + </dc:filter> - <dc:macro name="flood-map"> - <floodmap> - <dc:for-each> - <dc:context> - <dc:call-macro name="range-filter"> - <dc:context> - <dc:statement> - SELECT a.gid AS aid, - f.id AS fid, - f.name AS facet_name, - f.num AS facet_num, - f.description AS facet_description - FROM outs AS o, facets AS f, artifacts AS a - WHERE f.name = 'floodmap.wsplgen' AND - f.out_id = o.id AND - o.artifact_id = ${a_id} AND - a.id = ${a_id} - </dc:statement> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="factory" value="winfo"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="artifact-id" value="${aid}"/> - <dc:attribute name="ids" value="${aid}"/> - <dc:attribute name="out" value="floodmap"/> - </dc:element> - </dc:for-each> - </dc:context> - </dc:call-macro> - </dc:context> - </dc:for-each> - </floodmap> - </dc:macro> + <dc:filter expr="$hws_kind=2"> + <dc:if test="dc:has-result()"> + <Damm> + <dc:call-macro name="hwspoints_by_kind_factory"/> + </Damm> + </dc:if> + </dc:filter> - <dc:comment> - MINFO bedheight middle - </dc:comment> + <dc:filter expr="$hws_kind=3"> + <dc:if test="dc:has-result()"> + <Graben> + <dc:call-macro name="hwspoints_by_kind_factory"/> + </Graben> + </dc:if> + </dc:filter> + </dc:macro> - <dc:macro name="floodmap-hws-user"> + <dc:macro name="hwspoints"> + <hws_points> + <official> + <dc:context> + <dc:statement> + SELECT DISTINCT + fs.name AS fed_name, + fs.id AS fed_id + FROM hws_points hws + JOIN fed_states fs ON hws.fed_state_id = fs.id + WHERE river_id = ${river_id} + AND hws.official=1 + </dc:statement> + <dc:for-each> <dc:context> <dc:statement> - SELECT id AS out_id - FROM outs - WHERE artifact_id = ${a_id} AND name = 'floodmap' + SELECT DISTINCT + name AS hws_name, + kind_id AS hws_kind + FROM hws_points + WHERE river_id = ${river_id} + AND official=1 + AND fed_state_id = ${fed_id} ORDER BY name </dc:statement> - <dc:for-each> - <dc:context> - <dc:statement> - SELECT name AS facet_name, - num AS facet_num, - description AS facet_description - FROM facets - WHERE out_id = ${out_id} AND name = 'floodmap.usershape' - ORDER BY num ASC, name DESC - </dc:statement> - <own-hws> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="ids" value="${facet_num}"/> - <dc:attribute name="factory" value="winfo"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="artifact-id" value="${a_gid}"/> - <dc:attribute name="out" value="floodmap"/> - </dc:element> - </dc:for-each> - </own-hws> - </dc:context> - </dc:for-each> + <fedstate description="{$fed_name}"> + <dc:call-macro name="hwspoints_by_kind"/> + </fedstate> </dc:context> - </dc:macro> + </dc:for-each> + </dc:context> + <dc:context> + <dc:statement> + SELECT distinct + name AS hws_name, + kind_id AS hws_kind + FROM hws_points + WHERE river_id = ${river_id} + AND official=1 + AND fed_state_id IS NULL + ORDER BY name + </dc:statement> + <hws_fed_unknown> + <dc:call-macro name="hwspoints_by_kind"/> + </hws_fed_unknown> + </dc:context> + </official> + <inofficial> + <dc:context> + <dc:statement> + SELECT DISTINCT + fs.name AS fed_name, + fs.id AS fed_id + FROM hws_points hws + JOIN fed_states fs ON hws.fed_state_id = fs.id + WHERE river_id = ${river_id} + AND hws.official=0 + </dc:statement> + <dc:for-each> + <dc:context> + <dc:statement> + SELECT DISTINCT + name AS hws_name, + kind_id AS hws_kind + FROM hws_points + WHERE river_id = ${river_id} + AND official=0 + AND fed_state_id = ${fed_id} ORDER BY name + </dc:statement> + <fedstate description="{$fed_name}"> + <dc:call-macro name="hwspoints_by_kind"/> + </fedstate> + </dc:context> + </dc:for-each> + </dc:context> + <dc:context> + <dc:statement> + SELECT distinct + name AS hws_name, + kind_id AS hws_kind + FROM hws_points + WHERE river_id = ${river_id} + AND official=0 + AND fed_state_id IS NULL ORDER BY name + </dc:statement> + <hws_fed_unknown> + <dc:call-macro name="hwspoints_by_kind"/> + </hws_fed_unknown> + </dc:context> + </inofficial> + </hws_points> + </dc:macro> - <dc:macro name="bedquality-bed"> - <bed_quality_bed> - <dc:for-each> - <dc:context> - <dc:call-macro name="range-filter"> - <dc:context> - <dc:statement> - SELECT id AS oid - FROM outs AS o - WHERE - o.artifact_id = ${a_id} AND - o.name='bed_longitudinal_section' - </dc:statement> - <dc:for-each> - <quality-bed description="{$river} {$a_creation} {$collection_name}"> - <dc:context> - <dc:statement> - SELECT a.gid AS aid, - f.id AS fid, - f.name AS facet_name, - f.num AS facet_num, - f.description AS facet_description - FROM outs AS o, facets AS f, artifacts AS a - WHERE - (f.name = 'bed_longitudinal_section.bed_diameter_toplayer' - OR f.name = 'bed_longitudinal_section.bed_diameter_sublayer') AND - f.out_id = o.id AND - o.artifact_id = ${a_id} AND - a.id = ${a_id} - </dc:statement> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="factory" value="minfo"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> - <dc:attribute name="artifact-id" value="${aid}"/> - <dc:attribute name="out" value="bed_longitudinal_section"/> - </dc:element> - </dc:for-each> - </dc:context> - </quality-bed> - </dc:for-each> - </dc:context> - </dc:call-macro> - </dc:context> - </dc:for-each> - </bed_quality_bed> - </dc:macro> + <dc:macro name="hwslines_by_kind"> + <dc:comment> + Call from a context where fed_name hws_kind hws_name and river_id is + availble + </dc:comment> - <dc:macro name="bedquality-load"> - <bed_quality_load> - <dc:for-each> - <dc:context> - <dc:call-macro name="range-filter"> - <dc:context> - <dc:statement> - SELECT id AS oid - FROM outs AS o - WHERE - o.artifact_id = ${a_id} AND - o.name='bed_longitudinal_section' - </dc:statement> - <dc:for-each> - <quality-load description="{$river} {$a_creation} {$collection_name}"> - <dc:context> - <dc:statement> - SELECT a.gid AS aid, - f.id AS fid, - f.name AS facet_name, - f.num AS facet_num, - f.description AS facet_description - FROM outs AS o, facets AS f, artifacts AS a - WHERE - f.name = 'bed_longitudinal_section.bedload_diameter' AND - f.out_id = o.id AND - o.artifact_id = ${a_id} AND - a.id = ${a_id} - </dc:statement> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="factory" value="minfo"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> - <dc:attribute name="artifact-id" value="${aid}"/> - <dc:attribute name="out" value="bed_longitudinal_section"/> - </dc:element> - </dc:for-each> - </dc:context> - </quality-load> - </dc:for-each> - </dc:context> - </dc:call-macro> - </dc:context> - </dc:for-each> - </bed_quality_load> - </dc:macro> + <dc:macro name="hwslines_by_kind_factory"> + <dc:for-each> + <hws factory="wmshwslinesfactory" + ids="{$river_id};{$hws_name}" + name="{$hws_name}"/> + </dc:for-each> + </dc:macro> - <dc:macro name="bedquality-density"> - <bed_quality_density> + <dc:filter expr="$hws_kind=1"> + <dc:if test="dc:has-result()"> + <Durchlass> + <dc:call-macro name="hwslines_by_kind_factory"/> + </Durchlass> + </dc:if> + </dc:filter> + + <dc:filter expr="$hws_kind=2"> + <dc:if test="dc:has-result()"> + <Damm> + <dc:call-macro name="hwslines_by_kind_factory"/> + </Damm> + </dc:if> + </dc:filter> + + <dc:filter expr="$hws_kind=3"> + <dc:if test="dc:has-result()"> + <Graben> + <dc:call-macro name="hwslines_by_kind_factory"/> + </Graben> + </dc:if> + </dc:filter> + </dc:macro> + + <dc:macro name="hwslines"> + <hws_lines> + <official> + <dc:context> + <dc:statement> + SELECT DISTINCT + fs.name AS fed_name, + fs.id AS fed_id + FROM hws_lines hws + JOIN fed_states fs ON hws.fed_state_id = fs.id + WHERE river_id = ${river_id} + AND hws.official=1 + </dc:statement> + <dc:for-each> + <dc:context> + <dc:statement> + SELECT DISTINCT + name AS hws_name, + kind_id AS hws_kind + FROM hws_lines + WHERE river_id = ${river_id} + AND official=1 + AND fed_state_id = ${fed_id} ORDER BY name + </dc:statement> + <fedstate description="{$fed_name}"> + <dc:call-macro name="hwslines_by_kind"/> + </fedstate> + </dc:context> + </dc:for-each> + </dc:context> + <dc:context> + <dc:statement> + SELECT distinct + name AS hws_name, + kind_id AS hws_kind + FROM hws_lines + WHERE river_id = ${river_id} + AND official=1 + AND fed_state_id IS NULL + ORDER BY name + </dc:statement> + <hws_fed_unknown> + <dc:call-macro name="hwslines_by_kind"/> + </hws_fed_unknown> + </dc:context> + </official> + <inofficial> + <dc:context> + <dc:statement> + SELECT DISTINCT + fs.name AS fed_name, + fs.id AS fed_id + FROM hws_lines hws + JOIN fed_states fs ON hws.fed_state_id = fs.id + WHERE river_id = ${river_id} + AND hws.official=0 + </dc:statement> + <dc:for-each> + <dc:context> + <dc:statement> + SELECT DISTINCT + name AS hws_name, + kind_id AS hws_kind + FROM hws_lines + WHERE river_id = ${river_id} + AND official=0 + AND fed_state_id = ${fed_id} ORDER BY name + </dc:statement> + <fedstate description="{$fed_name}"> + <dc:call-macro name="hwslines_by_kind"/> + </fedstate> + </dc:context> + </dc:for-each> + </dc:context> + <dc:context> + <dc:statement> + SELECT distinct + name AS hws_name, + kind_id AS hws_kind + FROM hws_lines + WHERE river_id = ${river_id} + AND official=0 + AND fed_state_id IS NULL ORDER BY name + </dc:statement> + <hws_fed_unknown> + <dc:call-macro name="hwslines_by_kind"/> + </hws_fed_unknown> + </dc:context> + </inofficial> + </hws_lines> + </dc:macro> + + <dc:macro name="floodmarks"> + <dc:context> + <dc:statement> + SELECT DISTINCT + COALESCE(CAST (year AS VARCHAR(64)), 'Unbekanntes Jahr') AS year + FROM flood_marks + WHERE river_id = ${river_id} + </dc:statement> + <dc:if test="dc:has-result()"> + <floodmarks> + <dc:for-each> + <floodmark name="{$year}" + factory="wmsfloodmarkfactory" + ids="{$river_id};{$year};{$year}"/> + </dc:for-each> + </floodmarks> + </dc:if> + </dc:context> + </dc:macro> + + <dc:macro name="catchments"> + <catchments> + <catchment_wms factory="externalwmsfactory" + ids="http://geoportal.bafg.de/wmsproxy/INSPIRE/DrainageBasin;HY.PHYSICALWATERS.CATCHMENTS;Einzugsgebiete (WMS)" /> + <dc:call-macro name="flood-map-gaugelocations"/> + </catchments> + </dc:macro> + + <dc:macro name="flood-map-gaugelocations"> + <gaugelocations> + <gauge_points factory="externalwmsfactory" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;Pegelpunkte;Pegelpunkte (WSV)"/> + <gauge_names factory="externalwmsfactory" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;Pegelnamen;Pegelnamen (WSV)"/> + <gauge_level factory="externalwmsfactory" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;Pegelwasserstand;Aktueller Wasserstand (WSV)"/> + <gauge_tendency factory="externalwmsfactory" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;TendenzWasserstand;Tendenz des Wasserstands (WSV)"/> + </gaugelocations> + </dc:macro> + + <dc:macro name="flood-map-riveraxis"> + <dc:context> + <dc:statement> + SELECT DISTINCT + ak.name AS kind_name, + ax.kind_id AS kind_id, + ax.name AS layer_name + FROM river_axes ax + JOIN axis_kinds ak on ax.kind_id = ak.id + WHERE river_id = ${river_id} + </dc:statement> + <dc:if test="dc:has-result()"> + <axis> + <dc:filter expr="$kind_id=1"> + <dc:for-each> + <actual description="{$kind_name}" + ids="{$river_id};{$kind_name};{$kind_id}" + factory="riveraxis"/> + </dc:for-each> + </dc:filter> + <dc:filter expr="$kind_id!=1"> + <other> <dc:for-each> - <dc:context> - <dc:call-macro name="range-filter"> - <dc:context> - <dc:statement> - SELECT id AS oid - FROM outs AS o - WHERE - o.artifact_id = ${a_id} AND - o.name='bed_longitudinal_section' - </dc:statement> - <dc:for-each> - <density description="{$river} {$a_creation} {$collection_name}"> - <dc:context> - <dc:statement> - SELECT a.gid AS aid, - f.id AS fid, - f.name AS facet_name, - f.num AS facet_num, - f.description AS facet_description - FROM outs AS o, facets AS f, artifacts AS a - WHERE - (f.name = 'bed_longitudinal_section.sediment_density_toplayer' OR - f.name = 'bed_longitudinal_section.sediment_density_sublayer') AND - f.out_id = o.id AND - o.artifact_id = ${a_id} AND - a.id = ${a_id} - </dc:statement> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="factory" value="minfo"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> - <dc:attribute name="artifact-id" value="${aid}"/> - <dc:attribute name="out" value="bed_longitudinal_section"/> - </dc:element> - </dc:for-each> - </dc:context> - </density> - </dc:for-each> - </dc:context> - </dc:call-macro> - </dc:context> - </dc:for-each> - </bed_quality_density> - </dc:macro> - - <dc:macro name="bedquality-porosity"> - <bed_quality_porosity> - <dc:for-each> - <dc:context> - <dc:call-macro name="range-filter"> - <dc:context> - <dc:statement> - SELECT id AS oid - FROM outs AS o - WHERE - o.artifact_id = ${a_id} AND - o.name='bed_longitudinal_section' - </dc:statement> - <dc:for-each> - <porosity description="{$river} {$a_creation} {$collection_name}"> - <dc:context> - <dc:statement> - SELECT a.gid AS aid, - f.id AS fid, - f.name AS facet_name, - f.num AS facet_num, - f.description AS facet_description - FROM outs AS o, facets AS f, artifacts AS a - WHERE - (f.name = 'bed_longitudinal_section.porosity_toplayer' OR - f.name = 'bed_longitudinal_section.porosity_sublayer') AND - f.out_id = o.id AND - o.artifact_id = ${a_id} AND - a.id = ${a_id} - </dc:statement> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="factory" value="minfo"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> - <dc:attribute name="artifact-id" value="${aid}"/> - <dc:attribute name="out" value="bed_longitudinal_section"/> - </dc:element> - </dc:for-each> - </dc:context> - </porosity> - </dc:for-each> - </dc:context> - </dc:call-macro> - </dc:context> - </dc:for-each> - </bed_quality_porosity> - </dc:macro> - - <dc:macro name="flow-velocity"> - <flow-velocity> - <dc:for-each> - <dc:context> - <dc:call-macro name="range-filter"> - <dc:context> - <dc:statement> - SELECT id AS oid - FROM outs AS o - WHERE - o.artifact_id = ${a_id} and o.name='flow_velocity' - </dc:statement> - <dc:for-each> - <flow description="{$river} {$a_creation} {$collection_name}"> - <dc:context> - <dc:statement> - SELECT a.gid AS aid, - f.id AS fid, - f.name AS facet_name, - f.num AS facet_num, - f.description AS facet_description - FROM outs AS o, facets AS f, artifacts AS a - WHERE - (f.name = 'flow_velocity.totalchannel' OR - f.name = 'flow_velocity.mainchannel' OR - f.name = 'flow_velocity.totalchannel.filtered' OR - f.name = 'flow_velocity.mainchannel.filtered') AND - f.out_id = o.id AND - o.artifact_id = ${a_id} AND - a.id = ${a_id} - </dc:statement> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="factory" value="minfo"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> - <dc:attribute name="artifact-id" value="${aid}"/> - <dc:attribute name="out" value="flow_velocity"/> - </dc:element> - </dc:for-each> - </dc:context> - </flow> - </dc:for-each> - </dc:context> - </dc:call-macro> - </dc:context> + <misc-axis description="{$layer_name}" + ids="{$river_id};{$layer_name};{$kind_id}" + factory="riveraxis"/> </dc:for-each> - </flow-velocity> - </dc:macro> - - <dc:macro name="sediment-load"> - <sediment-load> - <dc:for-each> - <dc:context> - <dc:call-macro name="range-filter"> - <dc:context> - <dc:statement> - SELECT id AS oid - FROM outs AS o - WHERE - o.artifact_id = ${a_id} and o.name='sedimentload_ls' - </dc:statement> - <dc:for-each> - <load description="{$river} {$a_creation} {$collection_name}"> - <dc:context> - <dc:statement> - SELECT a.gid AS aid, - f.id AS fid, - f.name AS facet_name, - f.num AS facet_num, - f.description AS facet_description - FROM outs AS o, facets AS f, artifacts AS a - WHERE f.name LIKE 'sedimentload%' AND - f.out_id = o.id AND - o.artifact_id = ${a_id} AND - a.id = ${a_id} - </dc:statement> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="factory" value="minfo"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> - <dc:attribute name="artifact-id" value="${aid}"/> - <dc:attribute name="out" value="sedimentload_ls"/> - </dc:element> - </dc:for-each> - </dc:context> - </load> - </dc:for-each> - </dc:context> - </dc:call-macro> - </dc:context> - </dc:for-each> - </sediment-load> - </dc:macro> + </other> + </dc:filter> + </axis> + </dc:if> + </dc:context> + </dc:macro> - <dc:macro name="bedheight-differences"> - <bedheight-differences> - <dc:for-each> - <dc:context> - <dc:call-macro name="range-filter"> - <dc:context> - <dc:statement> - SELECT id AS oid, - name AS o_name - FROM outs AS o - WHERE - o.artifact_id = ${a_id} AND - (o.name = 'bed_difference_year' OR - o.name = 'bed_differnece_epoch') - </dc:statement> - <dc:for-each> - <difference description="{$river} {$a_creation} {$collection_name}"> - <dc:context> - <dc:statement> - SELECT a.gid AS aid, - f.id AS fid, - f.name AS facet_name, - f.num AS facet_num, - f.description AS facet_description - FROM outs AS o, facets AS f, artifacts AS a - WHERE (f.name LIKE 'bedheight_difference.year%' OR - f.name LIKE 'bedheight_difference.epoch%') AND - f.out_id = o.id AND - o.artifact_id = ${a_id} AND - a.id = ${a_id} - </dc:statement> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="factory" value="minfo"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> - <dc:attribute name="artifact-id" value="${aid}"/> - <dc:choose> - <dc:when test="dc:contains($o_name, 'bed_difference_year')"> - <dc:attribute name="out" value="bed_difference_year"/> - </dc:when> - <dc:otherwise> - <dc:attribute name="out" value="bed_difference_epoch"/> - </dc:otherwise> - </dc:choose> - </dc:element> - </dc:for-each> - </dc:context> - </difference> - </dc:for-each> - </dc:context> - </dc:call-macro> - </dc:context> - </dc:for-each> - </bedheight-differences> - </dc:macro> + <dc:macro name="flood-map-km"> + <dc:context> + <dc:statement> + SELECT DISTINCT 1 FROM river_axes_km WHERE river_id = ${river_id} + </dc:statement> + <dc:for-each> + <kilometrage factory="wmskmfactory" ids="{$river_id}"/> + </dc:for-each> + </dc:context> + </dc:macro> - <dc:macro name="waterlevels-discharge"> - <waterlevels-discharge> + <dc:macro name="flood-map-fixpoints"> + <dc:context> + <dc:statement> + SELECT name AS name + FROM fixpoints + WHERE river_id = ${river_id} + GROUP BY name + </dc:statement> + <dc:for-each> + <fixpoints factory="wmsfixpointsfactory" + ids="{$river_id};{$name}"/> + </dc:for-each> + </dc:context> + </dc:macro> + + <dc:macro name="flood-map-qps"> + <dc:context> + <dc:statement> + SELECT DISTINCT + cs.kind_id AS kind_id, + cs.name AS layer_name, + ck.name AS kind_name + FROM cross_section_tracks cs + JOIN cross_section_track_kinds ck ON cs.kind_id = ck.id + WHERE river_id = ${river_id} + </dc:statement> + <dc:if test="dc:has-result()"> + <qps> + <dc:filter expr="$kind_id=1"> + <dc:for-each> + <actual description="{$kind_name}" + factory="wmsqpsfactory" + ids="{$river_id};{$kind_name};{$kind_id}"/> + </dc:for-each> + </dc:filter> + <dc:filter expr="kind_id=0"> + <other> <dc:for-each> - <dc:context> - <dc:call-macro name="range-filter"> - <dc:context> - <dc:statement> - SELECT id AS oid - FROM outs AS o - WHERE - o.artifact_id = ${a_id} AND - o.name = 'discharge_longitudinal_section' - </dc:statement> - <dc:for-each> - <discharge description="{$oid} {$river} {$a_id} {$a_creation} {$collection_name}"> - <dc:context> - <dc:statement> - SELECT a.gid AS aid, - f.id AS fid, - f.name AS facet_name, - f.num AS facet_num, - f.description AS facet_description - FROM outs AS o, facets AS f, artifacts AS a - WHERE f.name = 'discharge_longitudinal_section.w' AND - f.out_id = o.id AND - o.artifact_id = ${a_id} AND - a.id = ${a_id} - </dc:statement> - <dc:for-each> - <dc:element name="${facet_name}"> - <dc:attribute name="factory" value="winfo"/> -<!-- <dc:attribute name="out" value="${out}"/>--> - <dc:attribute name="description" value="${facet_description}"/> - <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> - <dc:attribute name="artifact-id" value="${aid}"/> - <dc:attribute name="out" value="longitudinal_section"/> - </dc:element> - </dc:for-each> - </dc:context> - </discharge> - </dc:for-each> - </dc:context> - </dc:call-macro> - </dc:context> + <misc-qps description="{$layer_name}" + factory="wmsqpsfactory" + ids="{$river_id};{$layer_name};{$kind_id}"/> </dc:for-each> - </waterlevels-discharge> - </dc:macro> + </other> + </dc:filter> + </qps> + </dc:if> + </dc:context> + </dc:macro> - <dc:iterate var="out" container="artifact-outs"> - <dc:choose> - <dc:when test="$out = 'longitudinal_section'"> - <dc:call-macro name="longitudinal"/> - <dc:call-macro name="differences"/> - <dc:call-macro name="officiallines_user"/> - </dc:when> - <dc:when test="$out = 'discharge_longitudinal_section'"> - <dc:call-macro name="longitudinal"/> - <dc:call-macro name="differences"/> - </dc:when> - <dc:when test="$out = 'w_differences'"> - <dc:call-macro name="longitudinal"/> - <dc:call-macro name="differences"/> - </dc:when> - <dc:when test="$out = 'fix_deltawt_curve'"> - <dc:call-macro name="delta-wt"/> - </dc:when> - <dc:when test="$out = 'reference_curve'"> - <dc:call-macro name="reference-curves"/> - </dc:when> - <dc:when test="$out = 'computed_discharge_curve'"> - <dc:call-macro name="computed-discharge-curve"/> - </dc:when> - <dc:when test="$out = 'cross_section'"> - <dc:call-macro name="waterlevels"/> - </dc:when> - <dc:when test="$out = 'fix_longitudinal_section_curve'"> - <dc:call-macro name="longitudinal-section"/> - </dc:when> - <dc:when test="$out = 'fix_derivate_curve'"> - <dc:call-macro name="fix-derivate-curve"/> - </dc:when> - <dc:when test="$out = 'fix_wq_curve'"> - <dc:call-macro name="fix-wq-curve"/> - </dc:when> - <dc:when test="$out = 'duration_curve'"> - <dc:call-macro name="duration-curve"/> - </dc:when> - <dc:when test="$out = 'waterlevels'"> - <!-- base data --> - <dc:call-macro name="basedata_0"/> - <!-- extra-longitudinal-sections --> - <dc:call-macro name="basedata_1_additionals"/> - <!-- fixations --> - <dc:call-macro name="basedata_2_fixations"/> - <!-- flood water marks--> - <dc:call-macro name="basedata_4_heightmarks-points"/> - <!-- flood protection --> - <dc:call-macro name="basedata_5_flood-protections"/> - <dc:call-macro name="waterlevels-fix"/> - </dc:when> - <dc:when test="$out = 'fix_wq_curve'"> - <dc:call-macro name="waterlevels-fix"/> - </dc:when> - <dc:when test="$out = 'floodmap'"> - <dc:call-macro name="flood-map"/> - </dc:when> - <dc:when test="$out = 'map'"> - <dc:call-macro name="flood-map"/> - </dc:when> - <dc:when test="$out = 'bedheight_middle'"> - <dc:call-macro name="waterlevels-discharge"/> - <dc:call-macro name="waterlevels-fix"/> - </dc:when> - <dc:when test="$out = 'floodmap-hws'"> - <dc:call-macro name="floodmap-hws-user"/> - </dc:when> - <dc:when test="$out = 'flow_velocity'"> - <dc:call-macro name="bedquality-bed"/> - <dc:call-macro name="bedquality-load"/> - </dc:when> - <dc:when test="$out = 'bed_longitudinal_section'"> - <dc:call-macro name="bedquality-bed"/> - <dc:call-macro name="bedquality-load"/> - <dc:call-macro name="bedquality-density"/> - <dc:call-macro name="bedquality-porosity"/> - </dc:when> - <dc:when test="$out = 'sedimentload_ls'"> - <dc:call-macro name="differences"/> - <dc:call-macro name="bedheight-differences"/> - <dc:call-macro name="flow-velocity"/> - <dc:call-macro name="sediment-load"/> - </dc:when> - <dc:when test="$out = 'bed_difference_year'"> - <dc:call-macro name="waterlevels-discharge"/> - <dc:call-macro name="bedheight-differences"/> - <dc:call-macro name="differences"/> - <dc:call-macro name="waterlevels-fix"/> - <dc:call-macro name="delta-wt-ls"/> - </dc:when> - <dc:when test="$out = 'bed_difference_epoch'"> - <dc:call-macro name="waterlevels-discharge"/> - <dc:call-macro name="bedheight-differences"/> - <dc:call-macro name="differences"/> - <dc:call-macro name="waterlevels-fix"/> - <dc:call-macro name="delta-wt-ls"/> - </dc:when> - </dc:choose> - </dc:iterate> + <dc:macro name="flood-map-buildings"> + <buildings> + <dc:context> + <dc:statement> + SELECT DISTINCT + b.name AS building_name, + bk.name AS building_kind, + b.kind_id AS building_kind_id + FROM buildings b + JOIN building_kinds bk ON b.kind_id = bk.id + WHERE river_id = ${river_id} + </dc:statement> + <dc:if test="dc:has-result()"> + <dc:filter expr="$building_kind_id!=0"> + <dc:for-each> + <buildings description="{$building_kind}" + factory="wmsbuildingsfactory" + ids="{$river_id};{$building_kind};{$building_kind_id}"/> + </dc:for-each> + </dc:filter> + <dc:filter expr="$building_kind_id=0"> + <other> + <dc:for-each> + <buildings description="{$building_name}" + factory="wmsbuildingsfactory" + ids="{$river_id};{$building_name}"/> + </dc:for-each> + </other> + </dc:filter> + </dc:if> + </dc:context> + <dc:context> + <dc:statement> + SELECT DISTINCT + j.kind_id AS jetty_kind_id, + jk.name AS jetty_kind + FROM jetties j + JOIN jetty_kinds jk ON j.kind_id = jk.id + WHERE river_id = ${river_id} + </dc:statement> + <dc:if test="dc:has-result()"> + <jetties> + <dc:for-each> + <jetty description="{$jetty_kind}" + factory="wmsjettiesfactory" + ids="{$river_id};{$jetty_kind};{$jetty_kind_id}"/> + </dc:for-each> + </jetties> + </dc:if> + </dc:context> + </buildings> + </dc:macro> + + <!-- Common stuff --> + + <dc:macro name="km-filtered-wsts"> + <dc:context connection="system"> + <dc:statement> + SELECT w.kind AS kind, + w.id AS wst_id, + wc.id AS wst_column_id, + wc.position AS wst_column_position, + wc.description AS info, + w.description AS wst_description, + wc.name AS wst_column_name, + wr.a AS deffrom, + wr.b AS defto + FROM wst_columns wc + JOIN wsts w ON wc.wst_id = w.id + JOIN wst_ranges wr ON wc.id = wr.wst_column_id + WHERE w.river_id = ${river_id} AND + NOT((${tokm} < wr.a) or (${fromkm} > wr.b)) + </dc:statement> + <dc:macro-body/> + </dc:context> + </dc:macro> + + <dc:macro name="km-filtered-userdata"> + <dc:context connection="user"> + <dc:statement> + SELECT c.name AS collection_name, + ma.id AS a_id, + ma.state AS a_state, + ma.gid AS a_gid, + ma.creation AS a_creation, + COALESCE(ld_mode, '') AS ld_m, + COALESCE(ld_locations, '') AS ld_l, + COALESCE(ld_from, '') AS ld_f, + COALESCE(ld_to, '') AS ld_t + FROM users u + JOIN collections c ON c.user_id = u.id + JOIN master_artifacts_range ma ON ma.collection_id = c.id + WHERE c.id = ${collection_id} + AND ma.gid <> CAST(${artifact-id} AS uuid) + AND EXISTS ( + SELECT id + FROM artifact_data ad + WHERE ad.artifact_id = ma.id + AND k = 'river' + AND v = ${river}) + </dc:statement> + <dc:for-each> + <dc:variable name="from" type="number" expr="dc:fromValue($ld_m, $ld_l, $ld_f)"/> + <dc:variable name="to" type="number" expr="dc:toValue($ld_m, $ld_l, $ld_t)"/> + <dc:if test="!(($tokm < $from) or $fromkm > $tokm)"> + <dc:macro-body/> + </dc:if> + </dc:for-each> + </dc:context> + </dc:macro> + + <dc:macro name="user-range"> + <dc:choose> + <dc:when test="dc:contains($parameters, 'user-id')"> + <dc:context connection="user"> + <dc:statement> + SELECT COALESCE(ld_mode, '') AS ldm, + COALESCE(ld_locations, '') AS ldl, + COALESCE(ld_from, '') AS ldf, + COALESCE(ld_to, '') AS ldt + FROM master_artifacts_range + WHERE gid = CAST(${artifact-id} AS uuid) + </dc:statement> + <dc:for-each> + <dc:variable name="fromkm" type="number" expr="dc:fromValue($ldm, $ldl, $ldf)"/> + <dc:variable name="tokm" type="number" expr="dc:toValue($ldm, $ldl, $ldt)"/> + <dc:macro-body/> + </dc:for-each> </dc:context> - </dc:call-macro> - - </old_calculations> + </dc:when> + <dc:otherwise> + <dc:variable name="fromkm" type="number" expr="dc:fromValue('', '', '')"/> + <dc:variable name="tokm" type="number" expr="dc:toValue('', '', '')"/> + <dc:macro-body/> + </dc:otherwise> + </dc:choose> + </dc:macro> - <dc:if test="dc:contains($parameters,'load-system')"> - <dc:comment> - Include System specific part when 'load-system' is in parameters. - ----------------------------------------------------------------- - </dc:comment> - <dc:call-macro name="load-system"/> - </dc:if> - </dc:when> - - <dc:otherwise> - <dc:comment> - Include System specific part only if no user ID is given. - --------------------------------------------------------- - </dc:comment> - <dc:call-macro name="load-system"/> - </dc:otherwise> - </dc:choose> - -</datacage> + </datacage> </dc:template>