state.winfo.river = River
state.winfo.calculation_mode = Calculation Mode
state.winfo.location_distance = Location or distance selection
state.winfo.wq = Input for W/Q data
state.winfo.wq_adapted = Input for W/Q data
state.winfo.location = Choose the location
state.winfo.distance = Choose the range
state.winfo.distance_only = Range selection
state.winfo.uesk.wsp = Choose the waterlevel
state.winfo.uesk.dgm = Digital Terrain Model
state.winfo.uesk.profiles = Interpolated Profiles
state.winfo.uesk.floodplain = Lateral Boundary
state.winfo.uesk.differences = Differenzen between waterlevel and terrain
state.winfo.uesk.scenario = Flood Plain / Scenario
state.winfo.waterlevel_pair_select = Chosen differences
state.winfo.historicalq.reference_gauge = Selection of Reference Gauge
state.winfo.historicalq.timerange = Selection of Evaluation time
state.winfo.historicalq.mode = Selecion of analyses
state.winfo.reference.curve.input.start = Chosen Reference
state.winfo.reference.curve.input.end = Chosen Evaluation
state.fix.river = River
state.fix.calculation.mode = Calculation Mode

historical.mode.w = Waterlevel Analyse
historical.mode.q = Discharge Analyse

calc.surface.curve = Water Level/Surface Curve
calc.flood.map = Flood Plain
calc.discharge.curve = State Discharge Curve/Stage Discharge Relation
calc.duration.curve = Duration Curve
calc.discharge.longitudinal.section = TODO (W bei...)
calc.w.differences = Differences
calc.historical.discharge.curve = Historical Discharge Curve
calc.reference.curve = Reference Curve
calc.fixation.default = Fixation
calc.fixation.volmer = Balanced Waterlevel

state.chart.river = River
state.chart.type = Charttype

chart.new.durationcurve = Duration Curve
chart.new.computeddischargecurve = Discharge Curve
chart.new.longitudinal_section = Longitudinal Section
chart.new.w_differences = Differences
chart.new.crosssection = Cross Section

cross_section = Cross Section

reference_curve = Reference Curve
reference_curve_normalized = Normalized Reference Curve

scenario.current = Current
scenario.potentiel = Potentiel
scenario.scenario = Scenario

floodplain.option = Use Floodplain?
floodplain.active = Activ
floodplain.inactive = Inactiv

river = River
calculation_mode = Calculation Mode
ld_locations = Location(s)

chart.longitudinal.section.title = W-Longitudinal Section
chart.longitudinal.section.subtitle = Range: {0}-km {1,number,#.###} - {2,number,#.###}
chart.longitudinal.section.shortsubtitle = {0}
chart.longitudinal.section.xaxis.label = {0}-km
chart.longitudinal.section.yaxis.label = W [{0}]
chart.longitudinal.section.yaxis.second.label = Q [m\u00b3/s]
chart.longitudinal.annotations.label = {0}.km

chart.cross_section.title = Cross Section for river {0}
chart.cross_section.subtitle = {0}-km: {1,number,#.###}
chart.cross_section.xaxis.label = Distance [m]
chart.cross_section.yaxis.label = W [NN + m]

chart.discharge.curve.title = Discharge Curve
chart.discharge.curve.xaxis.label = Q [m\u00b3/s]
chart.discharge.curve.yaxis.label = W [cm]
chart.discharge.curve.curve.valid.from = {0} (valid from {1,date,short})
chart.discharge.curve.curve.valid.range = {0} (valid from {1,date,short} - {2,date,short})
chart.computed.discharge.curve.title = Discharge Curve
chart.computed.discharge.curve.subtitle = {0}-km: {1,number,#.###}
chart.computed.discharge.curve.yaxis.label = W [NN + m]
chart.computed.discharge.curve.curve.label = Discharge Curve {0} km {1}
chart.duration.curve.title = Duration Curve
chart.duration.curve.subtitle = {0}-km: {1,number,#.###}
chart.duration.curve.xaxis.label = Duration of Non-Exceedence [Days]
chart.duration.curve.yaxis.label = W [NN + m]
chart.duration.curve.curve.w = Waterlevel duration curve for {0}
chart.duration.curve.curve.q = Discharge duration curve for {0}
chart.historical.discharge.title = Historical Discharge Curves
chart.historical.discharge.subtitle = Gauge {0}
chart.historical.discharge.xaxis.label = Time
chart.historical.discharge.yaxis.label = Q [m\u00b3/s]
chart.historical.discharge.yaxis.second.label = W [cm]

chart.reference.curve.title = Reference Curve
chart.reference.curve.subtitle = {0}

chart.reference.curve.x.axis.in.cm = Reference Gauge(s) [cm]
chart.reference.curve.x.axis.in.m = Reference Station(s) [NN + m]
chart.reference.curve.y.axis.in.cm = Target Gauge(s) [cm]
chart.reference.curve.y.axis.in.m = Target Station(s) [NN + m] 

chart.w_differences.title = Differences
chart.w_differences.subtitle = Range: {0}-km {1,number,#.###} - {2,number,#.###}
chart.w_differences.yaxis.label = m
chart.w_differences.yaxis.second.label = W [NN + m]

chart.normalized.reference.curve.title = Reduced Reference Curve

facet.longitudinal_section.annotations = POIs
facet.discharge_curves.mainvalues.q = Q (main values)
facet.discharge_curves.mainvalues.w = W (main values)

export.waterlevel.csv.header.km = River-Km
export.waterlevel.csv.header.w = W [NN + m]
export.waterlevel.csv.header.q = Q [m\u00b3/s]
export.waterlevel.csv.header.q.desc = Description
export.waterlevel.csv.header.location = Location
export.waterlevel.csv.header.gauge = Reference Gauge
export.waterlevel.csv.meta.result = # Calculation Output - {0} - Waterlevel - FLYS 3
export.waterlevel.csv.meta.creation = # Time of creation: {0}
export.waterlevel.csv.meta.calculationbase = # Calculation base: {0}
export.waterlevel.csv.meta.river = # River: {0}
export.waterlevel.csv.meta.range = # Location/Range (km): {0} - {1}
export.waterlevel.csv.meta.gauge = # Gauge: {0}
export.waterlevel.csv.meta.q = # Q (m\u00b3/s): {0}
export.waterlevel.csv.meta.w = # W (NN + m): {0} - {1}
export.waterlevel.csv.not.in.gauge.range = Outside selected gauge
export.computed.discharge.curve.csv.header.w = W [NN + m]
export.computed.discharge.curve.csv.header.q = Q [m\u00b3/s]
export.duration.curve.csv.header.duration = D [Days]
export.duration.curve.csv.header.w = W [NN + m]
export.duration.curve.csv.header.q = Q [m\u00b3/s]
export.discharge.longitudinal.section.csv.header.km = River-Km
export.discharge.longitudinal.section.csv.header.w = W [NN + m]
export.discharge.longitudinal.section.csv.header.cw = W corr.
export.discharge.longitudinal.section.csv.header.q = Q [m\u00b3/s]
export.discharge.curve.at.header = Computed Discharge Curve for {0} {0}-km: {1}
export.historical.discharge.csv.header.timerange = Timerange
export.historical.discharge.csv.header.waterlevel = Waterlevel
export.historical.discharge.csv.header.discharge = Discharge
export.historical.discharge.csv.header.diff = Difference
export.historical.discharge.csv.header.gaugename = Gaugename
export.reference_curve.csv.header.km = km
export.reference_curve.csv.header.w.cm = W (cm at Gauge)
export.reference_curve.csv.header.w.m = W (m + NHN)
export.reference_curve.csv.header.w.q = equiv. Q (m\u00b3/s)

export.waterlevel.pdf.mode = Waterlevel
export.computed.discharge.pdf.mode = Computed Dischargecurve
export.duration.pdf.mode = Durationcurve
export.wdifferences.pdf.mode = W Differences
export.historical.discharge.pdf.mode = Historical Discharge
export.reference_curve.pdf.mode = Reference Curve
export.computed.discharge.pdf.file = /jasper/computed-discharge_en.jasper
export.duration.pdf.file = /jasper/duration_en.jasper
export.waterlevel.pdf.file = /jasper/waterlevel_en.jasper
export.wdifferences.pdf.file = /jasper/wdifferences_en.jasper
export.historical.discharge.pdf.file = /jasper/historical-discharge_en.jasper
export.reference_curve.pdf.file = /jasper/reference_en.jasper
export.reference_curve.pdf.file.gauge = /jasper/reference_en_gauge.jasper
export.reference_curve.pdf.file.gauge.end = /jasper/reference_en_gauge_end.jasper
export.reference_curve.pdf.file.gauge.start.end = /jasper/reference_en_gauge_start_end.jasper

floodmap.wmsbackground = Background Map
floodmap.riveraxis = River Axis
floodmap.uesk = Floodmap
floodmap.barriers = Digitized Objects
floodmap.kms = Kilometrage
floodmap.qps = Crosssection Tracks
floodmap.hws = Flood Control Works
floodmap.catchment = Catchment
floodmap.floodplain = Floodplain
floodmap.lines = Lines
floodmap.buildings = Buildings
floodmap.fixpoints = Fixpoints
floodmap.floodmaps = Floodmaps
floodmap.usershape = User data

wsplgen.job.queued = WSPLGEN job in queue.
wsplgen.job.error = An unexpected error while starting WSPLGEN occured.

wsp.selected.string = {0}

Mosel = Mosel
Saar = Saar
Elbe = Elbe

state.map.river = River

spline.interpolation.failed = Spline interpolation failed.
cannot.find.w.for.q = Cannot find W for Q = {0,number,#.##}.
cannot.find.q = Cannot find Q = {0,number,#.##}.
no.ws.found = No Ws found.
no.q.found.in.column = No Q found in {0,integer} column.
spline.creation.failed = Spline creation failed.
cannot.find.w.or.q = Cannot find W or Q.
km.not.found = Cannot find km.
cannot.create.wq.relation = Cannot create W/Q relation.
cannot.create.index.q.relation = Cannot create index/Q relation.

w.w.qkm1.failed = Calculating Q for WST index {0,number,#.##} failed.
w.w.wkm1.failed = Calculating W for Q = {0,number,#.##} /  WST index {1,number,#.##} failed.
w.w.qkm2.failed = Calculating Q for WST index {0,number,#.##} failed.
w.w.wkm2.failed = Calculating W for Q = {0,number,#.##} /  WST index {1,number,#.##} failed.

cannot.find.hist.q.for.w = Cannot find Q for W = {0,number,#.##} in timerange {1, date} - {2, date}
cannot.find.hist.q.tables = Cannot find Discharge Tables for given timerange.
cannot.find.hist.q.reftable = Cannot find reference Discharge Table for specified Gauge.

more.than.one.q.for.w = Found more Qs for W = {0,number,#.##}.

no.river.selected = No river selected.
no.gauge.selected = No gauge selected.
no.locations.selected = No locations selected.
no.kms.selected = No KMs selected.
converting.ws.to.qs.failed = Converting Ws to Qs failed.
no.wst.for.river = No WST found for selected river.
no.range.found = No range found.
no.gauge.found.for.km = No gauge found for KM.
cannot.create.segments = Cannot create segments.
cannot.compute.discharge.curve = Cannot create discharge curve.
cannot.find.ds = Cannot find Ds.
no.segments.found = No segments found.
no.values.given = No values given.
cannot.interpolate.w.q = Cannot interpolate W/Q.
manualpoints = Manual Points

no.reference.start.km = No reference start station given.
no.reference.end.kms = No reference end station(s) given.
waterlevels = Waterlevels

help.index=https://flys-intern.intevation.de/Flys-3.0/OnlineHilfe
help.winfo=https://flys-intern.intevation.de/Flys-3.0/OnlineHilfe/WINFO
help.winfo.wsp.location_distance=https://flys-intern.intevation.de/Flys-3.0/OnlineHilfe/WINFO#Eingabe_Streckendaten
help.winfo.wsp.wq=https://flys-intern.intevation.de/Flys-3.0/OnlineHilfe/WINFO#Eingabe_W.2BAC8-Q_Daten
help.winfo.discharge.longitudinal.distance=https://flys-intern.intevation.de/Flys-3.0/OnlineHilfe/WINFO#Wahl_der_Berechnungsstrecke
help.winfo.duration.locations=https://flys-intern.intevation.de/Flys-3.0/OnlineHilfe/WINFO#Eingabe_Streckendaten
help.winfo.discharge.longitudinal.wq=https://flys-intern.intevation.de/Flys-3.0/OnlineHilfe/WINFO#Eingabe_f.2BAPw-r_W.2BAC8-Q_Daten
help.winfo.diff.diffs=https://flys-intern.intevation.de/Flys-3.0/OnlineHilfe/WINFO#Zusammenstellen_der_Differenzen
help.winfo.reference.curve.start=https://flys-intern.intevation.de/Flys-3.0/OnlineHilfe/WINFO#Eingabe_des_Bezugsortes_.2BAC8_Bezugspegels
help.winfo.reference.curve.end=https://flys-intern.intevation.de/Flys-3.0/OnlineHilfe/WINFO#Eingabe_des_Zielortes_.2BAC8_Zielpegels
help.winfo.uesk.distance=https://flys-intern.intevation.de/Flys-3.0/OnlineHilfe/WINFO#Eingabe_Berechnungsstrecke
help.winfo.uesk.wsp=https://flys-intern.intevation.de/Flys-3.0/OnlineHilfe/WINFO#Wahl_der_Wasserspiegellage
help.winfo.uesk.dem=https://flys-intern.intevation.de/Flys-3.0/OnlineHilfe/WINFO#Wahl_des_Digitalen_Gel.2BAOQ-ndemodells
help.winfo.uesk.profiles=https://flys-intern.intevation.de/Flys-3.0/OnlineHilfe/WINFO#Eingabe_Abstand_Interpolierte_Profile
help.winfo.uesk.floodplain=https://flys-intern.intevation.de/Flys-3.0/OnlineHilfe/WINFO#Eingabe_Laterale_Begrenzung
help.winfo.uesk.differences=https://flys-intern.intevation.de/Flys-3.0/OnlineHilfe/WINFO#Eingabe_Differenz_Wasserspiegellage_und_Gel.2BAOQ-nde
help.winfo.uesk.scenario=https://flys-intern.intevation.de/Flys-3.0/OnlineHilfe/WINFO#A.2BANw-berschwemmungsfl.2BAOQ-che_.2BAC8_Szenario
help.winfo.historical.discharge.reference_gauge=https://flys-intern.intevation.de/Flys-3.0/OnlineHilfe/WINFO#Wahl_des_Bezugspegels
help.winfo.historical.discharge.timerange=https://flys-intern.intevation.de/Flys-3.0/OnlineHilfe/WINFO#Auswahl_des_Auswertezeitraumes
help.winfo.historical.discharge.mode=https://flys-intern.intevation.de/Flys-3.0/OnlineHilfe/WINFO#Auswahl_der_Analyseart