view flys-artifacts/src/main/resources/messages_de.properties @ 1793:1636686070f7

Initial commit to support styles in maps. flys-artifacts/trunk@3116 c6561f87-3c4e-4783-a992-168aeb5c3f6f
author Ingo Weinzierl <ingo.weinzierl@intevation.de>
date Fri, 28 Oct 2011 14:42:24 +0000
parents f7813b0c68ff
children 5e9696c32f04
line wrap: on
line source
state.winfo.river = Gew\u00e4sser
state.winfo.calculation_mode = Berechnungsart
state.winfo.location_distance = Wahl des Berechnungsortes/strecke
state.winfo.wq = Eingabe f\u00fcr W/Q Daten
state.winfo.wq_adapted = Eingabe f\u00fcr W/Q Daten
state.winfo.location = Wahl des Berechnungsortes
state.winfo.distance = Wahl der Berechnungsstrecke
state.winfo.uesk.wsp = Wahl der Wasserspiegellage
state.winfo.uesk.dgm = Digitales Gel\u00e4ndemodell
state.winfo.uesk.profiles = Interpolierte Profile
state.winfo.uesk.floodplain = Laterale Begrenzung
state.winfo.uesk.differences = Differenzen zwischen Wasserspiegellage und Gel\u00e4nde
state.winfo.uesk.scenario = \u00dcberschwemmungsfl\u00e4che / Szenario
state.winfo.waterlevel_pair_select = Ausgew\u00e4hlte Differenzen

calc.surface.curve = Wasserstand/Wasserspiegellage
calc.flood.map = \u00dcberschwemmungsfl\u00e4che
calc.discharge.curve = Abflusskurve/abflusstafel
calc.duration.curve = Dauerlinie
calc.discharge.longitudinal.section = W bei ungleichwertigem Abflussl\u00e4ngsschnitt
calc.w.differences = Differenzen

cross_section = Querprofil

scenario.current = Aktuell
scenario.potentiel = Potentiell
scenario.scenario = Szenario

floodplain.option = Talaue verwenden?

river = Fluss
calculation_mode = Berechnungsart
ld_locations = Ort(e)

chart.cross_section.title = Querprofildiagram f�r Gew\u00e4sser {0}
chart.cross_section.subtitle = {0}-km: {1,number,#.###}
chart.cross_section.xaxis.label = Abstand [m]
chart.cross_section.yaxis.label = W [NN + m]

chart.longitudinal.section.title = W-L\u00e4ngsschnitt
chart.longitudinal.section.subtitle = Bereich: {0}-km {1,number,#.###} - {2,number,#.###}
chart.longitudinal.section.xaxis.label = {0}-km
chart.longitudinal.section.yaxis.label = W [{0}]
chart.longitudinal.section.yaxis.second.label = Q [m\u00b3/s]
chart.longitudinal.annotations.label = {0}.km
chart.discharge.curve.title = Abflusskurve
chart.discharge.curve.xaxis.label = Q [m\u00b3/s]
chart.discharge.curve.yaxis.label = W [cm]
chart.discharge.curve.curve.valid.from = {0} (g\u00fcltig ab {1,date,medium})
chart.discharge.curve.curve.valid.range = {0} (g\u00fcltig ab {1,date,medium} - {2,date,medium})
chart.computed.discharge.curve.title = Abflusskurve
chart.computed.discharge.curve.subtitle = {0}-km: {1,number,#.###}
chart.computed.discharge.curve.yaxis.label = W [NN + m]
chart.computed.discharge.curve.curve.label = Abflusskurve {0} km {1}
chart.duration.curve.title = Dauerlinie
chart.duration.curve.subtitle = {0}-km: {1,number,#.###}
chart.duration.curve.xaxis.label = Unterschreitungsdauer [Tage]
chart.duration.curve.yaxis.label = W [NN + m]
chart.duration.curve.curve.w = Wasserstandsdauerline f\u00fcr {0}
chart.duration.curve.curve.q = Abflussdauerline f\u00fcr {0}

chart.w_differences.title = Differenzen
chart.w_differences.subtitle = Range: {0}-km {1,number,#.###} - {2,number,#.###}
chart.w_differences.yaxis.label = m
chart.w_differences.yaxis.second.label = W [NN + m]

facet.longitudinal_section.annotations = Streckenfavoriten
facet.discharge_curves.mainvalues.q = Q (Haupt- und Extremwerte)
facet.discharge_curves.mainvalues.w = W (Haupt- und Extremwerte)

export.waterlevel.csv.header.km = Fluss-Km
export.waterlevel.csv.header.w = W [NN + m]
export.waterlevel.csv.header.q = Q [m\u00b3/s]
export.computed.discharge.curve.csv.header.w = W [NN + m]
export.computed.discharge.curve.csv.header.q = Q [m\u00b3/s]
export.duration.curve.csv.header.duration = D [Tagen]
export.duration.curve.csv.header.w = W [NN + m]
export.duration.curve.csv.header.q = Q [m\u00b3/s]
export.discharge.longitudinal.section.csv.header.km = Fluss-Km
export.discharge.longitudinal.section.csv.header.w = W [NN + m]
export.discharge.longitudinal.section.csv.header.cw = W korr.
export.discharge.longitudinal.section.csv.header.q = Q [m\u00b3/s]
export.discharge.curve.at.header = Berechnete Abflusskurve f\u00fcr {0} {0}-km: {1}

floodmap.wmsbackground = Hintergrundkarte
floodmap.riveraxis = Flussachse
floodmap.uesk = \u00dcberschwemmungsfl\u00e4che
floodmap.barriers = Digitalisierte Objekte

wsplgen.job.queued = WSPLGEN Berechnung befindet sich in Warteschlange.
wsplgen.job.error = Ein unerwarteter Fehler beim Starten von WSPLGEN ist aufgetreten.

wsp.selected.string = {0}

http://dive4elements.wald.intevation.org