Mercurial > dive4elements > river
view flys-artifacts/ChangeLog @ 1624:238145ef67da
Cosmetics.
flys-artifacts/trunk@2799 c6561f87-3c4e-4783-a992-168aeb5c3f6f
| author | Felix Wolfsteller <felix.wolfsteller@intevation.de> |
|---|---|
| date | Wed, 21 Sep 2011 13:01:25 +0000 |
| parents | 0221451a24fe |
| children | c45e8d6b99a2 |
line wrap: on
line source
2011-09-21 Felix Wolfsteller <felix.wolfsteller@intevation.de> Cosmetics, improved debug output, doc. * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java: Improved debug output. * src/main/java/de/intevation/flys/artifacts/model/ManagedFacet.java: Added documentation. * src/main/java/de/intevation/flys/artifacts/states/WaterlevelPairSelectState.java, src/main/java/de/intevation/flys/artifacts/AnnotationArtifact.java: Removed commented code. * src/main/java/de/intevation/flys/collections/AttributeParser.java: Whitespace cosmetics. 2011-09-21 Felix Wolfsteller <felix.wolfsteller@intevation.de> Avoid NullPointerException when drawing XYChart without data. * src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Guard calls to dataset to avoid NullPointerException. 2011-09-21 Ingo Weinzierl <ingo@intevation.de> flys/issue325 (FLYS Client: Auswahl des DGM zeigt numerischen Wert an) * src/main/java/de/intevation/flys/artifacts/states/DGMSelect.java: Write a better label for the selected DEM into the static DESCRIBE. Use the name of the DEM file as label instead of the database id. 2011-09-16 Bjoern Schilberg <bjoern.schilberg@intevation.de> * doc/mapserver/fontset.txt: Added initial font set for km_annotation layer. * doc/mapserver/symbols/symbols.sym: Added square symbol for km and fixpoint layer. * doc/mapserver/saar-mapfile.map: Adjust styling in the flys karte-archiv way. 2011-09-19 Ingo Weinzierl <ingo@intevation.de> Tagged RELEASE 2.5 * Changes: Prepared changes for release. 2011-09-19 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/WDifferencesState.java, src/main/java/de/intevation/flys/artifacts/states/WaterlevelSelectState.java, src/main/java/de/intevation/flys/artifacts/states/WaterlevelPairSelectState.java, src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java, src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Removed needless imports. 2011-09-16 Ingo Weinzierl <ingo@intevation.de> * doc/conf/meta-data.xml: Improved datacage configuration for DEMs. * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Query DGMs by the given ID in the FLYS data pool - not by given range values. 2011-09-16 Ingo Weinzierl <ingo@intevation.de> * doc/conf/meta-data.xml: Added a section for DEMs to the floodmap section. 2011-09-16 Felix Wolfsteller <felix.wolfsteller@intevation.de> Fix build. * src/main/java/de/intevation/flys/artifacts/state/WDifferencesState.java: Fix build. 2011-09-16 Felix Wolfsteller <felix.wolfsteller@intevation.de> Take a given WaterlevelPair-String, load artifact and plot the diff. * src/main/java/de/intevation/flys/artifacts/state/WDifferencesState.java: Load correct artifacts. 2011-09-16 Bjoern Schilberg <bjoern.schilberg@intevation.de> * doc/mapserver/*: Added inital mapserver configuration files. 2011-09-16 Ingo Weinzierl <ingo@intevation.de> * doc/conf/meta-data.xml: Moved the system specific configuration into a macro to the top of the configuration document. Call this macro at the end of the user specific part and in the part that should contain the system specific stuff only! 2011-09-16 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: Defined createItem() here and adapted some method signatures, because I need the CallContext deeper in code than expected. * src/main/java/de/intevation/flys/artifacts/states/WaterlevelSelectState.java: Write the name of the selected waterlevel into the static DESCRIBE. * src/main/java/de/intevation/flys/artifacts/states/ScenarioSelect.java: Adapted method signatures that have been changed in DefaultState. * src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java: Removed method createItem() which is now defined in the upper class DefaultState. * src/main/resources/messages.properties, src/main/resources/messages_de_DE.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: Added string for selected waterlevel that is displayed in static UI. 2011-09-16 Ingo Weinzierl <ingo@intevation.de> * src/main/resources/messages.properties, src/main/resources/messages_de_DE.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: Added state label for waterlevel selection. 2011-09-15 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/WaterlevelSelectState.java: Validate incoming data string and strip brackets. * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Fetch waterlevel data from external Artifact if existing. If no external Artifact is specified that provides waterlevel data, we gonna try to fetch it from the current Artifact. 2011-09-15 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/WaterlevelPairSelectState.java: Removed needless import which caused compile errors. 2011-09-15 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: Added a transform() method. This method should be used to transform input data in form of a string into a better data structure. This state provides a simple implementation which just returns a StateData object that contains exactly the input string. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Transform input strings using DefaultState.transform() before they are added to its data pool. 2011-09-15 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Made collection solid for the case if it has no Artifacts. 2011-09-15 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/utils/FLYSUtils.java: Fetch Artifact from ArtifactDatabase properly. Write better error logs if that process fails. 2011-09-14 Felix Wolfsteller <felix.wolfsteller@intevation.de> Extend WDifferences branch to have calculations in dedicated, new state. * doc/conf/artifacts/winfo.xml: Added new State and Transition in WDifferences-branch. * src/main/java/de/intevation/flys/artifacts/states/WaterlevelPairSelectState.java: New state. * src/main/java/de/intevation/flys/artifacts/states/WDifferencesState.java: Specify to not take input, prepare getting other facets. 2011-09-14 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/DGMSelect.java: This state now desires the UIProvider 'dem_datacage_panel'. * src/main/java/de/intevation/flys/artifacts/states/WaterlevelSelectState.java: New. This state is used to define the desired UIProvider 'wsp_datacage_panel'. * doc/conf/artifacts/winfo.xml: Added a new way to start a WSPLGEN calculation when choosing the calculation type 'floodmap'. 2011-09-14 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/AttributeWriter.java: Merge facets only if their name AND their owner artifact are equal. 2011-09-14 Felix Wolfsteller <felix.wolfsteller@intevation.de> Partial Fix flys/issue304 (3) (Baseline). * src/main/java/de/intevation/flys/exports/WDifferencesCurveGenerator.java: Show Baseline in WDifferencesPlot. 2011-09-14 Felix Wolfsteller <felix.wolfsteller@intevation.de> Fix flys/issue310 (cross-section theme). * doc/conf/themes.xml: CrossSection-Themes: profile thin, water blue. 2011-09-14 Felix Wolfsteller <felix.wolfsteller@intevation.de> Fix flys/issue310 (cross-section theme). * doc/conf/themes.xml: CrossSection-Themes: profile thin, water blue. 2011-09-13 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Add an quick and simple error to the report if an error occured while WSPLGENJob creation. * src/main/resources/messages.properties, src/main/resources/messages_de_DE.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: Added error messages for WSPLGEN job creation errors. 2011-09-13 Felix Wolfsteller <felix.wolfsteller@intevation.de> Fix crash when drawing StickyAxisAnnotation when no range was given. User-directed issues remain ( flys/issue303 ). * src/main/java/de/intevation/flys/jfree/StickyAxisAnnotation.java (draw): Guard access to domainAxis, rangeAxis and the corresponding ranges. Warn and exit if any was null. 2011-09-13 Ingo Weinzierl <ingo@intevation.de> flys/issue290 (Karte: Eingabe von Differenzen zw. WSP und Gelände findet keine Ausprägung in der Karte) * doc/conf/mapserver/wsplgen_class.vm: Added styles for DIFF attribute. * doc/conf/mapserver/mapfile.vm: Set debug default to '5'. 2011-09-12 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Add a first WSPLGEN status message (notifies the user about a queued job) after the job has been added to the Scheduler. * src/main/resources/messages.properties, src/main/resources/messages_de_DE.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: Added english and german status message text. 2011-09-12 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/utils/GeometryUtils.java: Write shapefiles only if there are features for it existing. * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: A WSPLGEN facet is only created, if the calculation was successfully added to the Scheduler. A barrier facet is only created if the WSPLGEN calculation has been added to the scheduler AND if there are digitized geometries existing. 2011-09-12 Felix Wolfsteller <felix.wolfsteller@intevation.de> Copied and slightly modified implementation of guessWaterIncreasing from WQKms to (new) DataUtils. Accidentally commited usage in last commit, to correct orientation of diagram (invert x axis). * src/main/java/de/intevation/flys/utils/DataUtils.java: New file with guessWaterIncreasing implementation from WQKms, slightly adjusted. 2011-09-12 Felix Wolfsteller <felix.wolfsteller@intevation.de> Cosmetics. * src/main/java/de/intevation/flys/exports/WDifferencesCurveGenerator.java, src/main/java/de/intevation/flys/artifacts/model/WKmsImpl.java: Cosmetics. 2011-09-12 Felix Wolfsteller <felix.wolfsteller@intevation.de> Added CSV Export for W-Differences. * doc/conf/conf.xml: Added Exporter. * doc/conf/artifacts/winfo.xml: Removed transition over distances state, added export outputmode and facet. * src/main/java/de/intevation/flys/exports/WDifferencesExporter.java: New, CSV-Exporter for WDifferences. * src/main/java/de/intevation/flys/artifacts/states/WDifferencesState.java: Add export facet. 2011-09-12 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/DataFacet.java: Cosmetics, docs. * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java, src/main/java/de/intevation/flys/exports/AbstractExporter.java, src/main/java/de/intevation/flys/exports/DurationCurveExporter.java: Cosmetics. 2011-09-12 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: Sourced the code to append a concrete data item to the static DESCRIBE part out to an own method (appendStaticData()). * src/main/java/de/intevation/flys/artifacts/states/ScenarioSelect.java: Override appendStaticData() to suppress the GeoJSON string to be included in the static DESCRIBE. 2011-09-12 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/CrossSectionFactory.java, src/main/java/de/intevation/flys/artifacts/model/CrossSectionWaterLineFacet.java, src/main/java/de/intevation/flys/artifacts/states/WDifferencesState.java, src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java, src/main/java/de/intevation/flys/artifacts/states/RiverAxisState.java, src/main/java/de/intevation/flys/exports/WDifferencesCurveGenerator.java, src/main/java/de/intevation/flys/exports/CrossSectionGenerator.java: Removed needless imports. 2011-09-09 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/CalculationMessage.java: New. A subclass of Message (in the Artifacts system). It stores a string message and a progress (in form of step x/y). * src/main/java/de/intevation/flys/wsplgen/JobObserver.java: The observer now writes background messages into the artifact system using the CallContext.addBackgroundMessage(). We use instances of CalculationMessage here, that makes the WINFOArtifact able to put progress information into the Artifact's DESCRIBE as well. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Write status message and progress information into the DESCRIBE if the Artifact has started a background process. 2011-09-09 Felix Wolfsteller <felix.wolfsteller@intevation.de> Fix flys/issue280 . * src/main/java/de/intevation/flys/jfree/StickyAxisAnnotation.java: Do not draw boxes around annotations. 2011-09-09 Felix Wolfsteller <felix.wolfsteller@intevation.de> Fix flys/issue279 . * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Fix behaviour in various thinkable malconditions. 2011-09-09 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Made one case of cross section fetching more robust. 2011-09-09 Felix Wolfsteller <felix.wolfsteller@intevation.de> Fix Facet name and Legend of W-Differences, also insert state to specify distance. * doc/conf/artifacts/winfo.xml: Add additional transitions to walk over distances state. * src/main/java/de/intevation/flys/artifacts/states/WDifferencesState.java: Set facets description. * src/main/java/de/intevation/flys/exports/WDifferencesCurveGenerator.java: Take facets description as legend. 2011-09-09 Felix Wolfsteller <felix.wolfsteller@intevation.de> Added configuration to kick-in w-differences branch of winfo. * doc/conf/conf.xml: Register new (w-differences) OutputGenerators. * doc/conf/artifacts/winfo.xml: Register new state and transitions. * src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java: Added new (w-differences) calculation mode. * src/main/java/de/intevation/flys/exports/WDifferencesCurveInfoGenerator.java: New file, implementing naive approach to display w-differences (accidentially omitted in last commit). 2011-09-09 Felix Wolfsteller <felix.wolfsteller@intevation.de> Added very stubby WDifferences State/OutGenerator for WINFOArtifact. * src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java: Added w_differences facet type. * src/main/java/de/intevation/flys/artifacts/states/WDifferencesState.java: New file, implements naive approach to calculate w-differences (of calculations identified by hardcoded uuids!) and register respective facet. * src/main/java/de/intevation/flys/exports/WDifferencesCurveGenerator.java: New file, implementing naive approach to display w-differences. 2011-09-09 Felix Wolfsteller <felix.wolfsteller@intevation.de> Implement getArtifact(uuid,context) in FLYSUtils. * src/main/java/de/intevation/flys/utils/FLYSUtils.java (getArtifact): Added implementation, partially resolving a TODO. Added logger instance. 2011-09-08 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WSPLGENCalculation.java: New. This sublcass of Calculation saves warnings and errors that occur while WSPLGEN is running. Note, that the interface of this class doesn't exactly apply the interface of Calculation. Maybe, we should generalize this interface! * src/main/java/de/intevation/flys/artifacts/model/WSPLGENJob.java: Stores an instance of WSPLGENCalculation now. We use this instance to save warnings and errors. * src/main/java/de/intevation/flys/wsplgen/ProblemObserver.java: Use the WSPLGENCalculation to save errors and warnings. * src/main/java/de/intevation/flys/artifacts/model/WSPLGENReportFacet.java: New. This facet is used for WSPLGEN reports. It stores an instance of WSPLGENCalculation which saves ERRORS and WARNINGS that occur while WSPLGEN execution. * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Create a WSPLGENReportFacet for WSPLGEN reports. * doc/conf/conf.xml: Added an OutputGenerator 'report' for WSPLGEN reports. * doc/conf/artifacts/winfo.xml: Added an output 'report' for WSPLGEN reports. 2011-09-08 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java, src/main/java/de/intevation/flys/artifacts/math/WKmsOperation.java, src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java: Cosmetics, docs. 2011-09-08 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/wsplgen/JobObserver.java: Small adjustments that makes it easier to subclass this observer. * src/main/java/de/intevation/flys/wsplgen/ProblemObserver.java: New. A sublcass of JobObserver which analyses the WSPLGEN output for errors and warnings. * src/main/java/de/intevation/flys/wsplgen/JobExecutor.java: Use JobObserver and ProblemObserver to track the whole WSPLGEN output and print number of errors/warnings to log output. 2011-09-08 Felix Wolfsteller <felix.wolfsteller@intevation.de> Added translation of w_differences. * src/main/resources/messages_de_DE.properties, src/main/resources/messages_de.properties, src/main/resources/messages_en.properties, src/main/resources/messages.properties: Added "w_differnces" translation. 2011-09-07 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Appended a new attribute 'background-processing' to the DESCRIBE of this Artifact. Its value is 'true' if this Artifact has started a background thread which has not finished yet - otherwise it is 'false. 2011-09-07 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/RiverAxisState.java, src/main/java/de/intevation/flys/utils/GeometryUtils.java: Moved the code to determine the extent of a river based on its axis to GeometryUtils. * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Determine the extent of the selected river and set the WMSLayerFacet's extent attribute. 2011-09-07 Felix Wolfsteller <felix.wolfsteller@intevation.de> Added Themeing support for CrossSection Diagrams. * doc/conf/themes.xml: Added new themes and mappings, slightly modified longitudinalsection theme. 2011-09-07 Felix Wolfsteller <felix.wolfsteller@intevation.de> In CrossSection Diagram fix subtitle to display the km of which the data is actually displayed (maybe contrasting users wish). * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: (getCrossSectionSnapKm): New method to fetch the actual km of crosssection. * src/main/java/de/intevation/flys/exports/CrossSectionGenerator.java: Add correct km to charts subtitle. 2011-09-07 Felix Wolfsteller <felix.wolfsteller@intevation.de> Fix various display-issues like i18n in cross-section diagram. * src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java: Set description of facets to expected values. * src/main/java/de/intevation/flys/artifacts/exports/CrossSectionGenerator.java: Fix i18n of chart title. Set subtitle to expected value, pass facets description to StyledSeries to see expected legend. 2011-09-07 Felix Wolfsteller <felix.wolfsteller@intevation.de> Cosmetics, resolved refactoring todo. * src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java (compute, computeAdvance, computeFeed): Refactored, extracted method, resolving duplicate code and TODO. 2011-09-07 Felix Wolfsteller <felix.wolfsteller@intevation.de> Fix waterline "calculation" at given km. Chosen approach is "head-through-wall". * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Some refactoring to do the same calculation twice easier and be able to "cross" waterline against correct profile data. 2011-09-07 Felix Wolfsteller <felix.wolfsteller@intevation.de> Fix setting of kilometer for profile (not yet waterlevel) of cross section diagram. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: (getCrossSectionData): Respect corss_section.km data; do naive linear search for profile data for this km. * src/main/java/de/intevation/flys/artifacts/model/CrossSectionFacet.java: Declare a ComputeType. * src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java: Implement computeFeed. 2011-09-07 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java, src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Minor cosmetics. 2011-09-07 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/CrossSectionWaterLineFacet.java, src/main/java/de/intevation/flys/artifacts/model/DataFacet.java, src/main/java/de/intevation/flys/artifacts/model/WaterlevelFacet.java, src/main/java/de/intevation/flys/artifacts/state/DefaultState.java: Cosmetics, docs. 2011-09-06 Ingo Weinzierl <ingo@intevation.de> * doc/conf/mapserver/barrier_polygons_class.vm, doc/conf/mapserver/barrier_lines_class.vm, doc/conf/mapserver/wsplgen_class.vm: Default Mapserver styles for barriers and WSPLGEN results. Those styles are only used as long as we don't have map specific themes (as already used in charts). * doc/conf/mapserver/layer.vm: Implements a fallback mechanism for styling barrier lines/polygons and WSPLGEN results. * src/main/java/de/intevation/flys/artifacts/model/LayerInfo.java: Added a getStyle() method that currently returns "null". This method needs to be implemented when map themes are introduced. 2011-09-06 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/LayerInfo.java: Renamed some attributes to make their job in the mapfile more obvious. * src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java: Added new facet type for barriers. * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Add a facet for the barriers layer. * src/main/java/de/intevation/flys/utils/MapfileGenerator.java: Parse barriers (lines and polygons) and create two new layers for each type - those layers are grouped. * doc/conf/mapserver/layer.vm: Renamed attribute based on changes in LayerInfo and added support for Group-Layers. 2011-09-06 Raimund Renkert <raimund.renkert@intevation.de> * doc/conf/conf.xml: Added driver to database configuration for use with postgresql. 2011-09-06 Ingo Weinzierl <ingo@intevation.de> * doc/conf/mapserver/mapfile.vm: Removed FONTSET attribute and set quotes for SHAPEPATH. 2011-09-05 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WSPLGENFacet.java: Removed. We gonna use the WMSLayerFacet until now. * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Add a WMSLayerFacet after we triggered the Scheduler to start a WSPLGEN calculation. 2011-09-05 Ingo Weinzierl <ingo@intevation.de> * doc/conf/mapserver/layer.vm, doc/conf/mapserver/mapfile.vm: Small bugfixes and style improvements. * src/main/java/de/intevation/flys/wsplgen/JobExecutor.java: Trigger the MapfileGenerator after a WSPLGEN job has finished regardless if it has been finished successfully or not. 2011-09-05 Ingo Weinzierl <ingo@intevation.de> * pom.xml: Added Apache Velocity 1.7 for templating support. * doc/conf/conf.xml: Added config options for mapserver/template relevant stuff. * doc/conf/mapserver/mapfile.vm, doc/conf/mapserver/layer.vm: New. A default mapfile template and a template used for layers. * src/main/java/de/intevation/flys/artifacts/model/LayerInfo.java: New. This class is used while reading WMS layer relevant information from filesystem. * src/main/java/de/intevation/flys/utils/MapfileGenerator.java: New. This thread is used for creating mapfiles for Mapserver. The MapfileGenerator runs in daemon mode (own thread) and creates mapfiles based on WMS layer relevant information read from filesystem. * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java, src/main/java/de/intevation/flys/utils/FLYSUtils.java: Moved shapefile specific XPath expressions from FloodMapState to FLYSUtils which is a better place to use it in other classes (as MapfileGenerator). 2011-09-05 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WSPLGENJob.java: Bugfixed broken attribute assignment. * src/main/java/de/intevation/flys/wsplgen/JobExecutor.java: Call CallContext.afterBackground() after a WSPLGEN job has finished to remove the background lock from Artifact. * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Call CallContext.afterCall(BACKGROUND) to lock the Artifact for background processing. 2011-09-02 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/wsplgen/JobExecutor.java: New. This class is used to start WSPLGEN for a specific WSPLGENJob. The System property "wsplgen.bin.path" tells the JobExecutor where the WSPLGEN binary is placed (which means in general, the property points to the 'wsplgen.exe'). * src/main/java/de/intevation/flys/wsplgen/Scheduler.java: New. This scheduler currently allows to start just a single WSPLGEN Thread. All WSPLGEN calculations should be started using Scheduler.addJob(). * src/main/java/de/intevation/flys/wsplgen/JobObserver.java: New. This thread reads log messages from WSPLGEN and listens for specific messages. It should be used to update status messages of the WSPLGEN calculation that is currently running. There is a System property that tells the JobObserver to log all WSPLGEN output to log4j: enable WSPLGEN output with "-Dwsplgen.log.output=true". * src/main/java/de/intevation/flys/artifacts/model/WSPLGENJob.java: Added the FLYSArtifact, the current working directory and the CallContext. * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Use the Scheduler to start new WSPLGEN calculations. 2011-09-02 Felix Wolfsteller <felix.wolfsteller@intevation.de> Add CrossSectionInfoGenerator. * src/main/java/de/intevation/flys/exports/CrossSectionInfoGenerator.java: New, trivial implementation of CrossSectionInfoGenerator. * doc/conf/conf.xml: Register CrossSectionInfoGenerator. 2011-09-01 Felix Wolfsteller <felix.wolfsteller@intevation.de> Cleanups of CrossSection*. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: New methods to retrieve name of utilized CrossSection. * src/main/java/de/intevation/flys/exports/CrossSectionGenerator.java: Cleanup, get rid of copied unused method, documentation and more sensible translations. * src/main/resources/messages_de_DE.properties, src/main/resources/messages_de.properties, src/main/resources/messages_en.properties, src/main/resources/messages.properties: Added cross_section* translations, also cleanups. 2011-09-01 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Set the "typ" attribute of lines and polygons in barrier shapefiles. 2011-09-01 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Set the Z values of line and polygon barrier geometries. Both barrier shapefiles will contain 3D geometries now. 2011-09-01 Felix Wolfsteller <felix.wolfsteller@intevation.de> Get real data to display in CrossSection (although ignorant of parameterization), making use of the showcase code of the CrossSectionApp- Standalone application. * doc/conf/artifacts/winfo.xml: Add new facet (~waterline) to state/out. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: New methods to get relevant data. So far just takes the first value of everything and assuming a waterlevel at 130m. * src/main/java/de/intevation/flys/artifacts/model/CrossSectionWaterLineFacet.java: New Facet responsible of water level in cross section. * src/main/java/de/intevation/flys/artifacts/charts/CrossSectionApp.java: Made some functionality publicly and statically available. * src/main/java/de/intevation/flys/artifacts/model/CrossSectionFacet.java: Update call. * src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java: Added new Facet type. * src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java: Added new Facet to out. * src/main/java/de/intevation/flys/exports/CrossSectionGenerator.java: Respect new facet and facets data. 2011-09-01 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/utils/GeometryUtils.java: Close an open shapefile transaction and catch exceptions which are thrown while shapefile creation here. If there occured an error, this functions returns FALSE, otherwise TRUE. * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Removed exception handling while shapefile creation - this is done in GeometryUtils now. 2011-09-01 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Renamed the file for WSPLGEN required waterlevels to "waterlevels.wst". WSPLGEN did not work with the former "waterlevels.txt" file. 2011-09-01 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/utils/GeometryUtils.java: New static function that builds new SimpleFeatureTypes with additional attributes. * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Write attributes "ELEVATION" and "KILOMETER" into the crosssection tracks shapefiles. 2011-08-31 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/utils/FLYSUtils.java: Added a method stub that should return a FLYSArtifact based on a given UUID. * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Write the selected WST file for WSPLGEN. Note, that this is the WST file of the current WINFO artifact. Furthermore, there is currently no way for the user to select a column from WST file, so we currently use the column that is written to WST file at first. 2011-08-31 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Changed the parameter order of a compute(...) method. This makes me able to call this without a hash value. * src/main/java/de/intevation/flys/artifacts/model/DataFacet.java, src/main/java/de/intevation/flys/artifacts/model/WaterlevelFacet.java, src/main/java/de/intevation/flys/artifacts/model/ReportFacet.java: Adapted the parameter order of the compute() call (see above). 2011-08-31 Felix Wolfsteller <felix.wolfsteller@intevation.de> More bones to CrossSection sceleton. * src/main/java/de/intevation/flys/artifacts/model/CrossSectionFactory.java, src/main/java/de/intevation/flys/artifacts/model/CrossSectionFacet.java: New, yet trivial implementations of Factory and Facet for CrossSections. * src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java: Add new CrossSection- (instead of Default-)Facet. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java, src/main/java/de/intevation/flys/exports/CrossSectionGenerator.java: Adjusted to use (touch) new Factory and Facet. 2011-08-31 Felix Wolfsteller <felix.wolfsteller@intevation.de> Cosmetics. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Cosmetics. 2011-08-31 Felix Wolfsteller <felix.wolfsteller@intevation.de> Cosmetics. * src/main/java/de/intevation/flys/artifacts/AnnotationArtifact.java, src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java, src/main/java/de/intevation/flys/artifacts/model/MainValuesQFacet.java, src/main/java/de/intevation/flys/exports/CrossSectionGenerator.java: Removed obselete imports. * src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java: Removed obselete imports, whitespaces. * src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java: Whitespaces, docs. 2011-08-31 Felix Wolfsteller <felix.wolfsteller@intevation.de> Fix translations of Main Values Facets. * src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java: Do acrobatics to keep state transient but get translated title. * src/main/java/de/intevation/flys/artifacts/MainValuesQFacet.java, src/main/java/de/intevation/flys/artifacts/MainValuesWFacet.java: Changed constructor to get description (which is then already be translated) dynamically, adjust deepCopy. * src/main/java/de/intevation/flys/states/StaticState.java: Adjust constructor accordingly. 2011-08-31 Felix Wolfsteller <felix.wolfsteller@intevation.de> Add sceleton for CrossSection outs. * doc/conf/artifacts/winfo.xml: Added new output mode to respective state of winfo artifact configuration. * src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java: Add new Dummy-Facet in state. * doc/conf/conf.xml: Registered new OutputGenerator. * src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java: Added new CROSS_SECTION type. * src/main/java/de/intevation/flys/exports/CrossSectionGenerator.java: New, stubby skeleton for an CrossSectionGenerator. * src/main/resources/messages_de_DE.properties, src/main/resources/messages_de.properties, src/main/resources/messages_en.properties, src/main/resources/messages.properties: Added cross_section translation, also cleanups (e.g. main values). 2011-08-31 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WSPLGENJob.java: Marked required parameters with a comment. * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Export floodplains (german 'Talaue') to shapefile and write its file path into the WSPLGEN job. 2011-08-31 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Search for a DGM that fits to the current river and km range and write its file path into the WSPLGEN job. 2011-08-30 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/utils/GeometryUtils.java: Improved exception handling: exceptions are catched in GeometryUtils now. * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Write river axis and crosssections to shapefiles and save shapefile pathes in WSPLGENJob. 2011-08-30 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Use the coorect SRID for reading GeoJSON and writing line/polygon shapefiles. * src/main/java/de/intevation/flys/utils/GeometryUtils.java: Use a concrete coordinate system while feature type creation. 2011-08-30 Ingo Weinzierl <ingo@intevation.de> * pom.xml: Added GeoTools 2.7.2 dependencies for Shapefile, GeoJSON and EPSG support. * src/main/java/de/intevation/flys/artifacts/model/WSPLGENJob.java: Store 'LIN' parameter in a list now. A WSPLGEN parameter might contain many LINs. * src/main/java/de/intevation/flys/utils/GeometryUtils.java: New functions to create FeatureTypes and to write shapefiles. * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Write user specified barriers into a shapefile placed in the artifact directory. 2011-08-30 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/utils/FLYSUtils.java: Added a function that extracts the SRID defined in the global configuration file for a given river. * src/main/java/de/intevation/flys/artifacts/states/RiverAxisState.java: Removed the code that extracts the river SRID - use FLYSUtils instead. 2011-08-29 Felix Wolfsteller <felix.wolfsteller@intevation.de> Use FLYSUtils.getRiver instead of WINFOArtifact.getRiver. * src/main/java/de/intevation/flys/exports/ChartGenerator.java: Use FLYSUtils.getRiver instead of WINFOArtifact.getRiver. 2011-08-29 Felix Wolfsteller <felix.wolfsteller@intevation.de> Use FLYSUtils.getRiver instead of WINFOArtifact.getRiver. * src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java, src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java, src/main/java/de/intevation/flys/artifacts/states/WQSelect.java, src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java, src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java: Use FLYSUtils.getRiver instead of WINFOArtifact.getRiver. 2011-08-29 Felix Wolfsteller <felix.wolfsteller@intevation.de> Commit accidentally omitted result of refactoring (WINFO/FLYSUtils/getRiver). * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Removed implementations of getRiver, update calls to use FLYSUtils. 2011-08-29 Felix Wolfsteller <felix.wolfsteller@intevation.de> Interpolate Q main values, generate interpolated W main values on the fly from Q main values. * src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java: (getGaugeDatum): removed, obsolete (getLocation): new, gets location Use WstValueTable to look up interpolated Qs of MainValues. In absence of the same functionality for Ws, generate W Main Values from Q Main Values. 2011-08-29 Felix Wolfsteller <felix.wolfsteller@intevation.de> Use new helper class FLYSUtils, minor refactorization. * src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java: Use new functionality of helper class, convenience of FLYSArtifact. 2011-08-29 Felix Wolfsteller <felix.wolfsteller@intevation.de> Refactored to use new Helper class FLYSUtils, moved getRiver-functionality in there. * src/main/java/de/intevation/flys/utils/FLYSUtils.java (getRiver): New function to retrieve river of an artifact, slightly modified from WINFOArtifact. * src/main/java/de/intevation/flys/artifacts/AnnotationArtifact.java: Removed implementations of getRiver, update calls to use FLYSUtils. 2011-08-29 Felix Wolfsteller <felix.wolfsteller@intevation.de> Minor cosmetics. * src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java: Resolved a TODO. * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: Added some documentation. * src/main/java/de/intevation/flys/artifacts/model/WMSLayerFacet.java: Minor cosmetic. 2011-08-26 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/meta-data.xml: Made it Oracle compatible. * src/main/java/de/intevation/flys/artifacts/datacage/templating/CompiledStatement.java: If running in debug mode log executed statements. Helps debugging Oracle connections. 2011-08-26 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Set some WSPLGENJob parameters which are stored at FLYSArtifact. 2011-08-26 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/utils/FLYSUtils.java: New. This helper class should provide some basic FLYS stuff. Currently, there are functions that return the km range/location. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Removed the methods that return the km range/locations. This is implemented in FLYSUtils now. * src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java, src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java, src/main/java/de/intevation/flys/exports/ChartGenerator.java: Adapted the WINFO method calls to retrieve the km range/locations - call FLYSUtils now. 2011-08-26 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: New method to destroy a single state. 2011-08-26 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java: Cosmetic, remove debug output and comments, minor style adjustments. 2011-08-26 Felix Wolfsteller <felix.wolfsteller@intevation.de> Added limited themeing-support for MainValues. * doc/conf/themes.xml: Added Q/W-MainValues themes. * src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java: Added limited theming support, add legend entry for main values. 2011-08-26 Ingo Weinzierl <ingo@intevation.de> * doc/conf/conf.xml: Added a configuration node that points to the directory where shapefiles should be stored in. * src/main/java/de/intevation/flys/artifacts/model/WSPLGENJob.java: New. This class is used to save/write the parameter for a WSPLGEN calculation. WSPLGEN's *.par files are written using the toFile() method. * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: A directory for all WSPLGEN stuff is created in computeAdvance() - those directory and all its contained files are removed in endOfLife(). 2011-08-26 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/utils/ThemeUtil.java: New Util to work with theme-related stuff. 2011-08-26 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java: Use NamedDoubles instead of MainValues, try to adjust scale of Ws. * src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java: Use NamedDoubles instead of MainValues, generalize annotation handling, to allow easier reusability and themeing. * src/main/java/de/intevation/flys/jfree/StickyAxisAnnotation.java: Added convenience constructor, exemplary switch on bordered text. 2011-08-26 Felix Wolfsteller <felix.wolfsteller@intevation.de> * doc/conf/meta-data.xml: Recommend MainValues for Computed discharge curves. 2011-08-26 Felix Wolfsteller <felix.wolfsteller@intevation.de> New NamedDouble class which implements a <String,double>-pair. * src/main/java/de/intevation/flys/artifacts/model/NamedDouble.java: New, implementation of a double with a string or vice versa. 2011-08-26 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Call State.endOfLife() for all States when endOfLife() of the Artifact is called. 2011-08-26 Felix Wolfsteller <felix.wolfsteller@intevation.de> Also plot "W"-MainValues (on vertical axis), take correct parameters, but do not convert to correct scale (cm vs NN+m). * src/main/java/de/intevation/flys/jfree/StickyAxisAnnotation.java: Naive attempt at allowing the vertical axis to be sticked at. * src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java: Store Q and W MainValues separately, add them to plot as annotations. * src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java: Serve the MainValues, parameterized on river and location, Q and W. Removed Facet-implementation. * src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java: Updated Facet Types. * src/main/java/de/intevation/flys/artifacts/model/MainValuesQFacet.java: src/main/java/de/intevation/flys/artifacts/model/MainValuesWFacet.java: New, trivial facets, extracted from MainValuesArtifact. 2011-08-26 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Call State.endOfLife() of each State that is no longer in the queue of the artifact when this artifact steps back to a previous state. 2011-08-25 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java: Plot MainValues delivered by MainValuesFacet in much the same ways than Annotations in LongitudinalSection plots. 2011-08-25 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/jfree/StickyAxisAnnotation.java: Prepare further differentiation between Annotations that stick to X or Y- Axis, copied some positioning logic into StickyAxisAnnotation implementation. 2011-08-25 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java: Minor cosmetics. 2011-08-25 Felix Wolfsteller <felix.wolfsteller@intevation.de> Added MainValue-Fetching-Capabilities to MainValuesArtifact. * src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java (initialize, getMinValues): Let MainValuesArtifact return "real" MainValues, although ignorant of all parameterization. 2011-08-25 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java (MainValueFacet): Improved and straightened implementation, added code-Annotations and Todos. 2011-08-25 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java (MainValueFacet): Improved and straightened implementation, added code-Annotations and Todos. 2011-08-25 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java (getState): Resolved multiple creation of state (yet not very clean). 2011-08-25 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/AnnotationFacet.java, src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: Cosmetics, docs. * src/main/java/de/intevation/flys/artifacts/AnnotationArtifact.java: Cosmetics. 2011-08-25 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java: Added new (MainValues) Facet-Type. 2011-08-24 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java: Added a method that returns a River object based on its database id. * src/main/java/de/intevation/flys/artifacts/RiverAxisArtifact.java: The data that is required for this artifact is fetched from database instead from a Master-Artifact. The creation of static artifacts should use database ids instead of cloning a Master-Artifact. 2011-08-24 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java: Removed needless imports. 2011-08-24 Felix Wolfsteller <felix.wolfsteller@intevation.de> Added configuration for factory and rule for MainValueArtifacts. * doc/conf.xml: Add a mainvalue factory to serve MainValueArtifacts. * doc/conf/meta-data.xml: Recomment mainvalue artifact when computed_discharge_curve can be put out. 2011-08-24 Felix Wolfsteller <felix.wolfsteller@intevation.de> Let MainValuesArtifact have a state, outputmode and facet. * src/main/java/de/intevation/flys/artifacts/states/StaticState.java: New, a non-abstract DefaultState. * src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java: Progressed with implementation, use StaticState to hook output modes and facet in; use (Static)FLYSArtifact implementation. 2011-08-24 Felix Wolfsteller <felix.wolfsteller@intevation.de> Smaller cosmetics. * src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java, src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java: Cosmetics in comments. * src/main/java/de/intevation/flys/artifacts/AnnotationArtifact.java: Added @Override annotations. * src/main/java/de/intevation/flys/artifacts/model/DataFacet.java: Use brackets to improve readability of ternary operator. 2011-08-24 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/meta-data.xml: Use "ids" in user specific part, too. 2011-08-24 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/meta-data.xml: s/db-ids/ids/g to unify system and user specific loading. 2011-08-24 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Extracted access to state and states in order to have fewer places to modify when going for single/trivial state- artifacts. 2011-08-24 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/WMSBackgroundState.java: Append the river's srid to the WMSLayerFacet. 2011-08-24 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java: Minor fixes, ressurect Facet implementation as inner class. 2011-08-24 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/winfo.xml: Moved the input of barriers one state earlier where the scenario is selected as well. * src/main/java/de/intevation/flys/artifacts/states/ScenarioSelect.java: This state now desires the "map_digitize" UI provider and returns both items "scenario" and "uesk.barriers" in the dynamic describe part. * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Removed the UI provider and the computeFeed() which is no longer needed, because there is no more user input in this state. 2011-08-24 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/WMSBackgroundState.java, src/main/java/de/intevation/flys/artifacts/states/RiverAxisState.java: Repaired broken xpath expressions (the config changed in one of the last commits) and make use of the variable support in xpath expressions to replace the rivername. * src/main/java/de/intevation/flys/artifacts/WMSBackgroundArtifact.java: Save the rivername while initializing this artifact. This is now necessary, because each river can have its own background wms configured. 2011-08-23 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java: Repaired broken river-wms initialization. 2011-08-23 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WMSLayerFacet.java, src/main/java/de/intevation/flys/artifacts/model/DataFacet.java, src/main/java/de/intevation/flys/artifacts/model/WaterlevelFacet.java, src/main/java/de/intevation/flys/artifacts/model/ReportFacet.java, src/main/java/de/intevation/flys/artifacts/model/DurationCurveFacet.java, src/main/java/de/intevation/flys/artifacts/model/ManagedFacet.java, src/main/java/de/intevation/flys/artifacts/model/ManagedFacetAdapter.java, src/main/java/de/intevation/flys/artifacts/model/AnnotationFacet.java, src/main/java/de/intevation/flys/artifacts/model/WSPLGENFacet.java: Made facets cloneable with the right type. * src/main/java/de/intevation/flys/artifacts/services/MapInfoService.java, src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java: Removed superfluous imports. 2011-08-23 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Declare the first artifact of an output as master artifact (artifacts are ordered by their creation time). 2011-08-23 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java: Removed facet interface. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Make artifacts cloneable. TODO: Override deepCopy() in subclassed states and facets. 2011-08-23 Ingo Weinzierl <ingo@intevation.de> * doc/conf/conf.xml: Added the MapInfoService and adapted the floodmap configuration. Now, each river can have its own background wms layer defined. * src/main/java/de/intevation/flys/artifacts/services/MapInfoService.java: New. This service returns some basic information used to create maps for a specific river. The name of the desired river needs to be defined at "/mapinfo/river/text()". * src/main/java/de/intevation/flys/artifacts/states/RiverAxisState.java: Adapted an xpath expression that points to the srid of a river in the floodmap configuration (which changed). 2011-08-22 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Build out/facet filter from XML document passed at creation time. 2011-08-22 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added some code to filter outs/facets by an optional positive list. This is needed to only expose parts of the facets. This is needed for artifacts which are loaded into a collection. TODO: create the filter from the XML document passed at creation time. 2011-08-22 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Moved all WINFO specific code to WINFOArtifact. FLYSArtifact is now only revolving about state affairs. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Re-inserted the specific stuff here. * src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java, src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java, src/main/java/de/intevation/flys/artifacts/states/WQSelect.java, src/main/java/de/intevation/flys/artifacts/AnnotationArtifact.java, src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java, src/main/java/de/intevation/flys/exports/ChartGenerator.java: Adjusted the casts. 2011-08-22 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/meta-data.xml: Filter by outs in user template part. 2011-08-22 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/winfo.xml: Defined an input value for the GeoJSON string to save user defined barriers in the map. * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Added a computeFeed() method. In addition, this state now prefers the "noinput" UI provider. 2011-08-19 Ingo Weinzierl <ingo@intevation.de> * doc/conf/conf.xml: Each river requires a SRID definition. This definition is used to transform the river's geometries into the desired projection. * src/main/java/de/intevation/flys/artifacts/model/WMSLayerFacet.java: This facets are able to save a SRID. * src/main/java/de/intevation/flys/artifacts/states/RiverAxisState.java: The extent that is written into the WMSLayerFacet is determined by the boundary of the geometry. * src/main/java/de/intevation/flys/utils/GeometryUtils.java: New. A utility class that provides helper functions for geometries. Currently, one function is defined, that creates a boundary string for OpenLayers. 2011-08-19 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java, src/main/java/de/intevation/flys/artifacts/states/DGMSelect.java, src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java, src/main/java/de/intevation/flys/artifacts/states/ProfileDistanceSelect.java, src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java, src/main/java/de/intevation/flys/artifacts/states/RangeState.java: Removed superfluous imports. 2011-08-19 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: Removed CallContext from state validation. It is not needed and hindered the extraction of all out of an artifact if you don't have a call context (like initial scan of datacage database). * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java: Extract all outs now. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java, src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java, src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java, src/main/java/de/intevation/flys/artifacts/states/FloodplainChoice.java, src/main/java/de/intevation/flys/artifacts/states/ScenarioSelect.java, src/main/java/de/intevation/flys/artifacts/states/DGMSelect.java, src/main/java/de/intevation/flys/artifacts/states/LocationSelect.java, src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java, src/main/java/de/intevation/flys/artifacts/states/ProfileDistanceSelect.java, src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java, src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java, src/main/java/de/intevation/flys/artifacts/states/DefaultState.java, src/main/java/de/intevation/flys/artifacts/states/WQSelect.java, src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java, src/main/java/de/intevation/flys/artifacts/states/RangeState.java, src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java, src/main/java/de/intevation/flys/artifacts/AnnotationArtifact.java, src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Adjusted calls. 2011-08-19 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/resources/messages.properties, src/main/resources/messages_de_DE.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: Added lacalization of "Streckenfavoriten". 2011-08-19 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Picky white-space cosmetics. 2011-08-19 Felix Wolfsteller <felix.wolfsteller@intevation.de> Added stub implementation of new MainValuesArtifact. * src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java: New. Stub implementation for new MainValuesArtifact. 2011-08-19 Sascha L. Teichmann <sascha.teichmann@intevation.de> Fixed flys/issue262 * src/main/java/de/intevation/flys/artifacts/datacage/Recommendations.java: Unified user and system tempate. Looks for "/artifact-database/metadata/template/text()" in conf.xml. Defaults to "${artifacts.config.dir}/meta-data.xml". If user id is given its the default connection for contexts. * doc/conf/conf.xml: Adjusted * doc/conf/meta-data-system.xml, doc/conf/meta-data-user.xml: Deleted. * doc/conf/meta-data.xml: Unified version of user and system template. * src/main/java/de/intevation/flys/artifacts/datacage/templating/App.java: Adjusted the test program. 2011-08-18 Sascha L. Teichmann <sascha.teichmann@intevation.de> Fixed flys/issue260 * doc/conf/meta-data-user.xml: Uses master_artifacts view now. 2011-08-18 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/datacage.sql: Added view master_artifacts to select the master artifacts of the collections more easily. To upgrade existing database: CREATE VIEW master_artifacts AS SELECT a2.id AS id, a2.gid AS gid, a2.state AS state, a2.creation AS creation, ci2.collection_id AS collection_id FROM collection_items ci2 JOIN artifacts a2 ON ci2.artifact_id = a2.id JOIN (SELECT ci.collection_id AS c_id, MIN(a.creation) AS oldest_a FROM collection_items ci JOIN artifacts a ON ci.artifact_id = a.id GROUP BY ci.collection_id) o ON o.c_id = ci2.collection_id WHERE a2.creation = o.oldest_a; TODO: Use the view in the templates. 2011-08-18 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/meta-data-user.xml: Removed state filter because it was broken. Simplified by joining two contexts. 2011-08-18 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/jfree/StickyAxisAnnotation.java: Fix issues with lines of annotation when zoomed (wrong scale used). 2011-08-18 Felix Wolfsteller <felix.wolfsteller@intevation.de> Added legend for annotations to LongitudinalSectionDiagram. * src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: Added a pseudo-dataseries/collection to employ existing infrastructure for displaying localized label for Annotations (yet unthemed). * src/main/resources/messages.properties, src/main/resources/messages_de_DE.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: Made label-string available for localization. 2011-08-17 Felix Wolfsteller <felix.wolfsteller@intevation.de> Moved StickyAxisAnnotation into new package de.intevation.flys.jfree . * src/main/java/de/intevation/flys/exports/StickyAxisAnnotation.java: Deleted/moved to src/main/java/de/intevation/flys/jfree/ . * src/main/java/de/intevation/flys/jfree/StickyAxisAnnotation.java: New/moved from src/main/java/de/intevation/flys/export/ , adjusted package statement, made class public. * src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: Added import statement for de.intevation.flys.jfree.StickyAxisAnnotation . 2011-08-17 Felix Wolfsteller <felix.wolfsteller@intevation.de> Extracted and renamed CustomAnnotation to StickyAxisAnnotation. Also removed needless imports. * src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java, src/main/java/de/intevation/flys/exports/StickyAxisAnnotation.java: Extracted class implementation CustomAnnotation and renamed to StickyAxisAnnotation. 2011-08-17 Felix Wolfsteller <felix.wolfsteller@intevation.de> Improved CustomAnnotations and rendering thereof, now including an "axis mark" (little line at axis), also prepared possibility to put annotations on Y-axis. * src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: Improved CustomAnnotation to include marks on the axis and better spacing from it. 2011-08-17 Felix Wolfsteller <felix.wolfsteller@intevation.de> Implemented proof-of-concept collision-detection when drawing CustomAnnotations (text only). * src/main/java/de/intevation/flys/exports/ChartExportHelper.java: Pass a fresh ChartRenderingInfo-Object to createBufferedImage, such that information can be collected while rendering. * src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: Exploit the fact that XYTextAnnotation already registers drawn shape in the ChartRenderingInfo if it exists and either an URL or tooltip is set. Before drawing, calculate own shape and compare against already registered shapes. 2011-08-16 Felix Wolfsteller <felix.wolfsteller@intevation.de> Implemented (yet dummy) custom Annotation class. * src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: Added implementation of yet dummy CustomAnnotation class. 2011-08-16 Felix Wolfsteller <felix.wolfsteller@intevation.de> Slightly improved rendering of annotations. * src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: Slightly improved rendering of annotations. Still no valid collision detection. Annotations are drawn every 2 km; first come first serve. 2011-08-15 Sascha L. Teichmann <sascha.teichmann@intevation.de> Fix for flys/issue191 * src/main/java/de/intevation/flys/artifacts/model/WQ.java(longestIncreasingWRangeIndices): Added a method to find the longest index range with increasing w values. * src/main/java/de/intevation/flys/exports/ATWriter.java: Export the longest range of monotone increasing w values instead of the first one. TODO: The first line of the export is still broken. * src/main/java/de/intevation/flys/artifacts/AnnotationArtifact.java: Removed superfluous import. 2011-08-12 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/artifacts/AnnotationArtifact.java: Resolved two TODOs: get Annotations of selected River, get "point" Annotations only. 2011-08-12 Felix Wolfsteller <felix.wolfsteller@intevation.de> Added functionality to query range and point-annotations only to AnnotationFactory. * src/main/java/de/intevation/flys/artifacts/model/AnnotationsFactory.java (getPointAnnotations, getAnnotationsBreadth): New functions to query breadth and point-only annotations. 2011-08-11 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/Recommendations.java: Added a development mode for recommendations. Enabled with stetting system property 'flys.datacage.recommendations.development' to true. When set the XML template are re-read if the timestamps of the files have changed so you do not have to restart the server again and again. * doc/conf/meta-data-user.xml: Sort collections by creation time in descending order. 2011-08-11 Felix Wolfsteller <felix.wolfsteller@intevation.de> Rather picky cosmetics only. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java, src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java, src/main/java/de/intevation/flys/artifacts/datacage/templating/Builder.java, src/main/java/de/intevation/flys/artifacts/datacage/Recommendations.java, src/main/java/de/intevation/flys/artifacts/model/WQKms.java, src/main/java/de/intevation/flys/artifacts/states/DefaultState.java, src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java, src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: End comments on a full stop, separate from closing '*/' by whitespace, adjusted javadoc comments. 2011-08-11 Felix Wolfsteller <felix.wolfsteller@intevation.de> Made Annotations visible in LongitudinalSection diagrams. * src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java, src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: Register new Facet Type, let LongitudinalSectionGenerator include Annotations in diagram (yet unfiltered and independent of river). 2011-08-11 Felix Wolfsteller <felix.wolfsteller@intevation.de> * doc/conf/conf.xml, doc/conf/artifacts/annotation.xml, doc/conf/meta-data-system.xml: Added configuration for AnnotationArtifacts. 2011-08-11 Felix Wolfsteller <felix.wolfsteller@intevation.de> Added demo- implementation of a AnnotationArtifact and its Facet. * src/main/java/de/intevation/flys/artifacts/AnnotationArtifact.java, src/main/java/de/intevation/flys/artifacts/model/AnnotationFacet.java, src/main/java/de/intevation/flys/artifacts/states/AnnotationRiverState.java: New. Initial version of an AnnotationArtifact and its State and Facet. 2011-08-10 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/datacage.sql: Extended schema for artifacts and collections to have creation times, too. To update existing databases: ALTER TABLE artifacts ADD COLUMN creation TIMESTAMP NOT NULL DEFAULT current_timestamp; ALTER TABLE collections ADD COLUMN creation TIMESTAMP NOT NULL DEFAULT current_timestamp; * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java: Store creation times for artifacts and collections, too. * src/main/resources/datacage-sql/org-h2-driver.properties, src/main/resources/datacage-sql/org-postgresql-driver.properties: Adjusted SQL statements. 2011-08-10 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java: Make it compilable again (BackendListener interface changed). 2011-08-10 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/meta-data-user.xml: Added grouping element around w/q of each longitudinal section artifact. * src/main/java/de/intevation/flys/artifacts/datacage/templating/CompiledStatement.java, src/main/java/de/intevation/flys/artifacts/datacage/templating/StackFrames.java: Added some debugging capabilities. * src/main/java/de/intevation/flys/artifacts/datacage/templating/ResultData.java: Added isEmpty() method. * src/main/java/de/intevation/flys/artifacts/datacage/templating/Builder.java: Now it is possible to nest <dc:elements> into other elements in the <dc:context> body. This is useful and needed for grouping and repeating results. 2011-08-10 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/Recommendations.java: User connection was cached, system was not. Lead to incorrect results. 2011-08-09 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/meta-data-user.xml: Added <old_calculations> element around old calculations. 2011-08-09 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/QRangeTree.java: Cosmetic: Replaced usage of legacy java.util.Stack with java.util.Deque. 2011-08-04 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/meta-data-user.xml: Use 'CAST(x AS uuid)' instead of 'x::uuid' to be more compatible. 2011-08-04 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/Recommendations.java: If given an artifact place its identifier into parameters passed to template. Fixed swapped user/system connections if using the user template. * doc/conf/meta-data-user.xml: Recommend w/q facet from old calculations if an artifact was given that represents a longitudinal section "Laengsschnitt". TODO I: The template uses PostgreSQL specific UUID casts. TODO II: We need to find a way only to recommend the master artifacts. 2011-08-04 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/templating/Builder.java: Added a <dc:comment> tag to place comments in the meta data templates. <!-- ... --> comments are copied through. * doc/conf/meta-data-user.xml: Added a simple test. 2011-08-04 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java: Be a bit more tolerant about empty strings for UUIDs of artifact and user. 2011-08-03 Sascha L. Teichmann <sascha.teichmann@intevation.de> Bring user specific meta data service to life. * doc/conf/conf.xml: There are now two templates to configure: The system template (only the data from the backend) and the user template (the datcage db and the backend db), * doc/conf/meta-data-template.xml: Deleted. * doc/conf/meta-data-user.xml: New. The user specific template. TODO: Write it! * doc/conf/meta-data-system.xml: New. The system template. * src/main/java/de/intevation/flys/artifacts/datacage/templating/NoneUserSpecific.java: Deleted. * src/main/java/de/intevation/flys/artifacts/datacage/Recommendations.java: New. The logic to fill the templates. * src/main/java/de/intevation/flys/artifacts/CollectionMonitor.java: Adjusted to follow the new call signatures. * src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java: Refactored. Removed the old code and only leave the new service. Following XPaths are evaluated on the incomming document: "/art:meta/art:artifact-id/@value" The UUID of the artifact. Optional. Used to fill the template enviroment. "/art:meta/art:user-id/@value" The UUID of the user. Optional. If given the user specific template is filled. "/art:meta/art:outs/@value" The list of outs used to recommend for the various outputs. "/art:meta/art:parameters/@value" A list of key/value pairs to inject more filters to the templating. * src/main/java/de/intevation/flys/artifacts/datacage/templating/App.java: Change to follow the new recommendations semantics. * src/main/java/de/intevation/flys/artifacts/datacage/templating/Builder.java: Added symbolic constants to distinguish "user" and "system" db connections. 2011-08-03 Felix Wolfsteller <felix.wolfsteller@intevation.de> * doc/conf/conf.xml: Cosmetics, let comments start with a capital and end on a full stop, removed incorrect comment. 2011-08-03 Felix Wolfsteller <felix.wolfsteller@intevation.de> * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Cosmetics, let comments start with a capital and end on a full stop. 2011-08-03 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/CollectionMonitor.java(extractOutputNames): Fixed potential NPE. 2011-08-03 Sascha L. Teichmann <sascha.teichmann@intevation.de> Added support for more than one db connection in datacage templating. * src/main/java/de/intevation/flys/artifacts/datacage/templating/Builder.java: Now you can pass a list of named db connections to the build process. The purpose is to mix more then one database (e.g. the backend db and the user specific one). To use this feature you can add an "connection" attribute to <dc:context> with the name of the connection to use. If no connection name is given the last used is used again. Initially the first connection in the given list is used. If the context is left the connection that was active before will be active again in a stacking manner. When creating NamedConnection objects you can set a boolean flag if the results coming from the connection should be cached. This is useful e.g. for the user specific database which runs in-memory so caching would introduce some superfluous overhead. * src/main/java/de/intevation/flys/artifacts/datacage/templating/CompiledStatement.java: When executing the queries explicitly pass if caching should be used. 2011-08-02 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java: Forgot to fetch dialect dependent SQL statement for deleting artifacts by uuid. 2011-08-02 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java: Set the name of the collections at initial scan, too. 2011-08-02 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java: Fixed wrong SQL references. 2011-08-02 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java: Fixed two NPEs. 2011-08-02 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/DatacageBackendListener.java, src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java: Forwarded kill collections and artifacts events to datacage. * src/main/resources/datacage-sql/org-h2-driver.properties, src/main/resources/datacage-sql/org-postgresql-driver.properties: Added statement to delete artifact by uuid. 2011-08-02 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/DatacageBackendListener.java: Made it compilable again. The signature of BackendListener has changed. 2011-08-01 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java: Completed the backend listener stuff. TODO I: Added some cleanup for orphaned artifacts. TODO II: Figure out a way to delete collections/artifacts which are delete from backend without the backend API. * src/main/resources/datacage-sql/org-h2-driver.properties, src/main/resources/datacage-sql/org-postgresql-driver.properties: Added needed statements. 2011-08-01 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java: Update collection names on change. Remove artifacts from collections. * src/main/resources/datacage-sql/org-h2-driver.properties, src/main/resources/datacage-sql/org-postgresql-driver.properties: Added needed statements. 2011-08-01 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/DatacageBackendListener.java: Call datacage with the global context. This is needed to access the state engine. * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java: Changed signatures to take the global context, too. Create artifacts via backend listener interface. 2011-08-01 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/DatacageBackendListener.java: Fixed recursion bug. 2011-08-01 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/DatacageBackendListener.java: Added debug output. 2011-08-01 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/conf.xml: Added backend listener for datacage. * src/main/java/de/intevation/flys/artifacts/datacage/DatacageBackendListener.java: New. Proxies backend listener calls to datacage. * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java: Implements backend listener. TODO: Update the datacage database according the change calls. 2011-08-01 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/meta, src/main/java/de/intevation/flys/artifacts/datacage/templating: Moved/renamed package to better fit the common semantics. DataCage.java is now call NoneUserSpecific.java to reflect the fact that it is the template for the user independent db analysis. * src/main/java/de/intevation/flys/artifacts/CollectionMonitor.java, src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java: Ajusted imports and calls. 2011-08-01 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/conf.xml: For documentation purposes added a out-commented section with the default configuration of the datacage. 2011-07-31 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java: Delete the artifacts at before initial scan, too. They are independent from users. Fixed problem when writing state data content. * src/main/resources/datacage-sql/org-h2-driver.properties: Added statement to delete the artifacts at initial scan, too. * src/main/resources/datacage-sql/org-postgresql-driver.properties: New. PostgreSQL version of the statements. The database scheme is the same as H2. Very useful for debugging. 2011-07-31 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java: Added kludge for the types of artifact data. They seem to be null in some circumstances. Needs to be debugged! 2011-07-31 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/DBConfig.java: Fixed default connection URL to use a namend in-mermory database. 2011-07-31 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/datacage.sql: Fixed constraint. * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java: Added some debug output. 2011-07-29 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/datacage.sql: Removed artifact_id from facet because there is a link via out_id -> outs.id: artifact_id -> artifacts to find the corresponding artifact. * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java, src/main/resources/datacage-sql/org-h2-driver.properties: Store facets of outs into datacage db at initial scan. 2011-07-29 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java, src/main/resources/datacage-sql/org-h2-driver.properties: Store outs of artifacts into datacage db at initial scan. TODO: store facets. 2011-07-29 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/datacage.sql: Added 'type' column in artifacts data. Maybe useful for filtering. * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java, src/main/resources/datacage-sql/org-h2-driver.properties: Store artifact data into db at initial scan. TODO: store outs and facets. 2011-07-29 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java, src/main/resources/datacage-sql/org-h2-driver.properties: Add artifacts into datacage db at initial scan. TODO: Store data, outs and facets. 2011-07-28 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/datacage.sql: Fixed spelling in sequence name. * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java, src/main/resources/datacage-sql/org-h2-driver.properties: Simply add collection item at initial scan if artifact was stored before. TODO: Store new artifacts. 2011-07-28 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java, src/main/resources/datacage-sql/org-h2-driver.properties: Add collections at initial scan. 2011-07-28 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java, src/main/resources/datacage-sql/org-h2-driver.properties: Add users at initial scan. 2011-07-28 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/datacage.sql: Using sequences for id generation now to make schema more compatible. 2011-07-28 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java, src/main/resources/datacage-sql/org-h2-driver.properties: Clear database before initial scan. 2011-07-28 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/DBConnection.java: Deleted. This stuff comes from the artifact database now. * src/main/java/de/intevation/flys/artifacts/datacage/DBConfig.java: New. The db config of the datacage database. * src/main/resources/datacage-sql/org-h2-driver.properties: New. The SQL statements needed for the datacage. * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java: Make use of the db config. 2011-07-27 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java: New. A artifact database lifetime listener to build the initial index of the artifacts in database. * doc/conf/conf.xml: Added the datacage to the list of lifetime listeners. 2011-07-27 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/datacage.sql: Added an explicit table for the outs of an artifact. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Make the current outs of an artifact accessible only with the global context. 2011-07-27 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/datacage.sql: Added ON DELETE CASCADE constraints. Added state in facet. 2011-07-26 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/datacage.sql: New. H2 Schema for the datacage database. Uses special features like IDENTITY (autoincrement) typed columns. * src/main/java/de/intevation/flys/artifacts/datacage/DBConnection.java: Pooled connection. * pom.xml: Added dependencies to H2 and Apache DBCP. 2011-07-26 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/test/java/de/intevation/flys/artifacts/AppTest.java, src/main/java/de/intevation/flys/artifacts/App.java: Removed. This the stupid "Hello, World!" app initially created by the maven archetype. It was never used. 2011-07-25 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java: Argh! Usage the DOM was not thread safe (discovered with ab). 2011-07-25 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/meta-data-template.xml: '$recommended' lead to XPath errors. Using "dc:contains($parameters, 'recommended')" helps. * src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java, src/main/java/de/intevation/flys/artifacts/services/meta/FunctionResolver.java: Added some debugging. * src/main/java/de/intevation/flys/artifacts/services/meta/DataCage.java: Added parameters as 'parameters' to parameters. Usefull to check for containment of variables. 2011-07-25 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java: Added 'if log.isDebugEnabled() {}'. 2011-07-25 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java: Made Artifact UUID optional and accept extra parameters, too. This enables the service to be used without an arttifact and test all filters. <art:meta xmlns:art="http://www.intevation.de/2009/artifacts"> <art:outs value="computed_discharge_curve,floodmap"/> <art:parameters value="river:Elbe"/> <art:filters value="recommended"/> </art:meta> * src/main/java/de/intevation/flys/artifacts/services/meta/FunctionResolver.java: 'contain' accept Maps and collection, too. * src/main/java/de/intevation/flys/artifacts/services/meta/DataCage.java: Made artifact option (= null) in recommendations. 2011-07-21 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/meta/CompiledStatement.java: Moved connection specific into inner class. The enables the reuse of the compiled statement. * src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java: The SQL statements are now only compiled once at creation time of the builder. Each connection now reuses them. 2011-07-21 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/cache.xml: Added configuration for static datacage db access. * src/main/java/de/intevation/flys/artifacts/services/meta/App.java: Using caches seems to need an explicit System.exit(). * src/main/java/de/intevation/flys/artifacts/services/meta/CompiledStatement.java: Added support for caching the SQL statements and there results. * src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java: Some clean up. Reordered code for performance. Strip SQL statements more aggressively. * src/main/java/de/intevation/flys/artifacts/services/meta/ResultData.java: Made it Serializable. * src/main/java/de/intevation/flys/artifacts/cache/CacheFactory.java: Introduced system property 'flys.artifacts.cache.config.file' to make the caching configurable without pulling up the whole stack. 2011-07-22 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Prepared the FLYSArtifactCollection to support the storage of already loaded recommendations in its attribute document. 2011-07-21 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java: Adjusted to use the DataCage recommendations. The incomming document can pass the artifacts UUID by '/art:outs/@value' the outs as a comma separated list in '/art:outs/@value' and optional a set of filters comma separated in '/art:filters/@value'. If UUID and OUTS are not given the old service is used. This should be removed as soon as the client uses the new service. 2011-07-21 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/meta/CompiledStatement.java: Allow '-' in variable names. 2011-07-21 Ingo Weinzierl <ingo@intevation.de> * doc/conf/meta-data-template.xml: Now, the river-id is really added to the factory node of the wmsbackground layer. 2011-07-21 Ingo Weinzierl <ingo@intevation.de> * doc/conf/meta-data-template.xml: Added the river-id to the factory node of the riveraxis and wmsbackground layer. 2011-07-21 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java, src/main/java/de/intevation/flys/artifacts/services/MainValuesService.java, src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java, src/main/java/de/intevation/flys/artifacts/services/RiverService.java: Adjusted to implement changed Service interface. 2011-07-21 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Refactored the method that retrieves the Outputs for the Artifact. Now, we are able to query the Outputs for the current state, and all outputs separately. * src/main/java/de/intevation/flys/artifacts/CollectionMonitor.java: The recommendations provided by this monitor will take the Outputs of the current state only into account. 2011-07-21 Ingo Weinzierl <ingo@intevation.de> * doc/conf/meta-data-template.xml: Added conditions for each output type. Splitted the "floodmap" output into two parts: a recommended one and a complete one. The recommended part will only build the document tree for the recommended artifacts; the complete part will build the whole document tree that is available for a floodmap. * src/main/java/de/intevation/flys/artifacts/CollectionMonitor.java: This Hook now uses the DataCage to generate the recommended artifacts. The output-defaults configurtion is needless now. * doc/conf/output-defaults.xml: Removed. The configuration of recommended artifacts takes place in meta-data-template.xml. * src/main/java/de/intevation/flys/artifacts/services/meta/DataCage.java: Bugfix: the DataCage didn't start working if its builder was NOT null, but it shouldn't start if the builder IS null. 2011-07-21 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java: Now it is possible to directly pass a Node as a root to the builder. The owning document if fetch by Node.getOwnerDocument(). This is useful if you want to generate the recommendation directly into an already existing document under a given node. * src/main/java/de/intevation/flys/artifacts/services/meta/DataCage.java: Changed the signature of recommend() to accept a node where to append the recommendations. 2011-07-20 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java: Added a macro mechanism: <dc:macro name="keine-fuenf"> <dc:text>'5' ist nicht in der Liste der Outs.</dc:text> </dc:macro> <dc:call-macro name="keine-fuenf"/> <dc:call-macro name="keine-fuenf"/> <dc:call-macro name="keine-fuenf"/> Macros can be defined everywhere in the template with 'macro'. There bodies can contain all valid elements including other 'macro's and 'call-macro's. They are called with their 'name' with 'call-macro'. The control flow is continued inside the body of the called macro and will continue right after the calling 'call-macro' when the macro body is finished. 2011-07-20 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java: Added a new 'if' construct similiar to XSLT: <dc:if test="not(dc:contains($outs, '5'))"> <dc:text>'5' ist nicht in der Liste der Outs.</dc:text> </dc:if> The control flow is continued inside the 'if' if the 'test' attribute as an XPath expression on an empty document evalutes to true. Else the inside is skipped. There is no 'else'. Use 'choose'/'otherwise' if you need this. 2011-07-20 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/meta/DataCage.java: Added a recommend() method to generate recommendations for a given artifact, outs and extra parameters. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added method to extract all data at once. 2011-07-20 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/meta/FunctionResolver.java: New. Custom XPath function provider. Provides 'dc:contains(Object [] haystack, Object needle)' by now. Should be useful to check containments in 'out' lists later. * src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java: Register the FunctionResolver to the evaluated XPaths. * src/main/java/de/intevation/flys/artifacts/services/meta/App.java: Added code to parse "param:a,b,c" to "param" -> new String [] { "a", "b", "c" } to help testing the 'dc:contains' XPath function. 2011-07-20 Ingo Weinzierl <ingo@intevation.de> * doc/conf/conf.xml: Added wms configurations for Saar, Mosel and Elbe. Each river supported by FLYS requires such a WMS configuration. A WMS should contain layers for the river axis, buildings, kilometer labels and maybe a background layer as well. * src/main/java/de/intevation/flys/artifacts/context/FLYSContext.java: Added key that is used to store a map of WMS URLs - for each river a WMS URL. * src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java: Parse the river WMS from global configuration. * src/main/java/de/intevation/flys/artifacts/states/RiverAxisState.java: Create WMSLayerFacets with URLs based on the river and the river wms configuration stored in the FLYSContext. * src/main/java/de/intevation/flys/artifacts/WMSBackgroundArtifact.java, src/main/java/de/intevation/flys/artifacts/RiverAxisArtifact.java: Adapted the initialize() signature and the method call of computeInit() which requires a FLYSContext to retrieve the river WMS configurations. * src/main/java/de/intevation/flys/artifacts/states/WMSBackgroundState.java, src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: Added the context object parameter to the computeInit() method. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Call initialize() with the context object - which is a FLYSContext or a CallContext. 2011-07-20 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/meta/App.java: Check if builder was created properly before using it. * src/main/java/de/intevation/flys/artifacts/services/meta/StackFrames.java: Implements now variable provider for XPath expressions. * src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java: Added new choose/when/otherwise construct similiar to XSLT <dc:choose> <dc:when test="$river = 'Mosel'"> <dc:text>Es ist die Mosel.</dc:text> </dc:when> <dc:when test="$river = 'Saar'"> <dc:text>Es ist die Saar.</dc:text> </dc:when> <dc:otherwise> <dc:text>Es ist weder Mosel noch Saar.</dc:text> </dc:otherwise> </dc:choose> A 'choose' block can contain a list of 'when's and an optional 'otherwise'. For each 'when' the test attribute is evaluated as an XPath expression on an empty document. The result of the evaluation is taken as a boolean value. If its value is true the control flow is continued inside the corresponding 'when' and the other choose elements are not tested. If the value is values the testing continues with the next 'when'. If no 'test' expression is evaluated to true, the control flow continues inside the 'otherwise'. If no 'otherwise' is given nothing happens at all. 2011-07-20 Ingo Weinzierl <ingo@intevation.de> * doc/conf/conf.xml: Added a config section for floodmaps. Currently, the background layer's url and layername is defined here. * src/main/java/de/intevation/flys/artifacts/states/WMSBackgroundState.java: Read the background layer configuration from conf.xml. Those values are used to create the WMSLayerFacet. 2011-07-20 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/WMSBackgroundState.java: The background layer facet will no longer have an extent set. 2011-07-20 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/WMSBackgroundState.java, src/main/java/de/intevation/flys/artifacts/states/RiverAxisState.java: Set the extent of the created WMSLayerFacets and i18n its descriptions. * src/main/resources/messages.properties, src/main/resources/messages_de_DE.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: Added I18N strings for the background an river axis layer. 2011-07-20 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WMSLayerFacet.java: This facet type has a method to set the extent of a WMS layer. The extent is written to the facets XML node in toXML() as well. 2011-07-20 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Adapted the signature of setup() which requires a CallMeta parameter now. * src/main/java/de/intevation/flys/artifacts/WMSBackgroundArtifact.java, src/main/java/de/intevation/flys/artifacts/RiverAxisArtifact.java: Use the CallMeta object retrieved in setup() to call initialize(). It is now able to i18n things. 2011-07-20 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/meta/App.java: New. Standalone app to debug the datacage template. To use in a maven environment: -Dmeta.data.template=PATH_TO_META_DATA-TEMPLATE.XML \ -Dmeta.data.parameters=river:Mosel \ -Dmeta.data.output=OUTPUT.XML \ -Dflys.backend.user=DB_USER \ -Dflys.backend.password=DB_PASSWORD \ -Dflys.backend.url=DB_CONNECTION_URL \ -Dexec.mainClass=de.intevation.flys.artifacts.services.meta.App 2011-07-20 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/meta/DataCage.java: New. First step to factor out the "Datenkorb" logic into a service independent singleton. * src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java: Uses the "Datenkorb" singleton now. 2011-07-20 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/ManagedFacet.java: Removed "index" property, because it is already existing in parent class. 2011-07-19 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java: Improved error handling. 2011-07-19 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/resources/metadata/template.xml: Deleted. * doc/conf/meta-data-template.xml: New. Was template.xml * doc/conf/conf.xml: Made meta data template configurable. * src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java: Load template from configuration not from resources. 2011-07-19 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/resources/metadata/template.xml: s/[a-z]+-id/db-id/ Make database ids identifiable with unique name "db-id". 2011-07-19 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/ManagedFacet.java: Override the toXML() method. Subclasses can now write their own XML representation. * src/main/java/de/intevation/flys/artifacts/model/ManagedDomFacet.java: New. This ManagedFacet uses an Element (DOM) to store the information about a facet. The intent of this facet type is to represent a facet stored in an Collection attribute. Different facets can have different attributes that we need to parse, but the only thing ManagedFacets need to do, is to adjust the attributes "active" and "position". So, those values are set directly on the Element, the other attributes aren't touched. * src/main/java/de/intevation/flys/artifacts/model/ManagedFacetAdapter.java: New. This facet is a wrapper for another facet. This subclass of a ManagedFacet overrides the toXML() method. The XML representation is defined by the inner facet that is stored as member variable. The ManagedFacet specific attributes "artifact", "facet", "pos" and "active" are added manually. * src/main/java/de/intevation/flys/collections/AttributeWriter.java: Uses the toXML() method to write a facet node into the attribute document. * src/main/java/de/intevation/flys/collections/AttributeParser.java: Uses the ManagedDomFacet to save the information of a facet which is contained in the attribute part of a Collection's DESCRIBE document. * src/main/java/de/intevation/flys/collections/OutputParser.java: Uses the ManagedFacetAdapter to save a facet, because we want to keep the specific facet to be able to write its specific XML representation into the Collection's DESCRIBE document. * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Adapted the XPath of facets stored in the attribute part of the DESCRIBE. 2011-07-18 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added a method that returns the Outputs for the Artifact. * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Adapeted the call of OutputParser. * src/main/java/de/intevation/flys/collections/OutputParser.java: Simplified the code to read the Outputs of Artifacts. This parser will now longer parse the DESCRIBE documents of the Artifacts, but query the Outputs via FLYSArtifact.getOutputs() directly. 2011-07-18 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java, src/main/java/de/intevation/flys/artifacts/StaticFLYSArtifact.java: Adapted the function call of ProtocolUtils.appendOutputModes(). * src/main/java/de/intevation/flys/artifacts/model/WMSLayerFacet.java: Override toXML() to add the URL and layernames to the XML representation of this facet. 2011-07-18 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/wmsbackground.xml, doc/conf/artifacts/riveraxis.xml: New configurations for an Artifact that is used as background layer in floodmaps, and an artifact that is used as layer showing the river axis in a floodmap. * doc/conf/output-defaults.xml: New file to configure default artifacts for specific output states. E.g. the floodmap state recommends a background layer and a layer displaying the river axis. In suche case, the floodmap state recommends two artifacts for the two layers. * doc/conf/conf.xml: Added new artifacts/artifact-factories and a Hook to monitor artifacts (-> CollectionMonitor.java). * src/main/java/de/intevation/flys/artifacts/model/WMSLayerFacet.java: New. This facet is used to represent a layer in a map. So, this facet stores information about a WMS URL and the layer names provided by this WMS. * src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java: Added facet types for the wmsbackground and riveraxis. * src/main/java/de/intevation/flys/artifacts/states/WMSBackgroundState.java, src/main/java/de/intevation/flys/artifacts/WMSBackgroundArtifact.java: New. An artifact and its default state. The intent of these classes is to generate WMSLayerFacets which represent background layers in maps. * src/main/java/de/intevation/flys/artifacts/states/RiverAxisState.java, src/main/java/de/intevation/flys/artifacts/RiverAxisArtifact.java: New. An artifact and its default state. The intent of these classes is to generate WMSLayerFacets which represent layers that display a river axis. * src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: Added the INIT ComputeType. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added a case for the INIT ComputeType while computing data. 2011-07-18 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: Added a method computeInit() which is called to initialize data/facets after an artifact has been created. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Repaired broken XPath. 2011-07-14 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/CollectionMonitor.java: Removed the code to generate new artifacts. Instead of creating new artifacts automatically, we decided to suggest creating new artifacts from specific types. Therefore, the DESCRIBE document of the artifacts is extended with a node that contains recommended artifact types. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: FLYSArtifacts might be setup with the identifier of an other FLYSArtifact. Subclasses are able to override a method called initialize(Artifact, GlobalContext). This might be helpful to extract required values or clone artifacts. 2011-07-14 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java: Adapted the signature of createArtifactContext() - it returns an instance of GlobalContext now. 2011-07-14 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/geom/Lines.java: Debugged the water fill algorithm. Added a lot of logging. * src/main/java/de/intevation/flys/artifacts/charts/CrossSectionApp.java: Added a text field to give a water level to fill in. 2011-07-14 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java, src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Moved code to create the output modes based on the given facets to FLYSArtifact. In addition, FLYSArtifact got a new method that returns a specific input value as string. * src/main/java/de/intevation/flys/artifacts/CollectionMonitor.java: New. This hook monitors the "post-feed" and "post-advance". If the monitored Artifact's state has configured recommended artifacts, this hook will create new Artifacts. TODO: We have to add the UUIDs of the new Artifacts to the DESCRIBE document of the artifact to let the client know, that there are new recommended Artifacts. * src/main/java/de/intevation/flys/artifacts/StaticFLYSArtifact.java: New. This Artifact is the base class for Artifacts, that represent static data. E.g. this could be a decoration theme in a chart or a background layer in the map. * src/main/java/de/intevation/flys/artifacts/states/OutputState.java: New. This state might be used as base class for states, that doesn't require any user input, but only provide static Facets added by a computeFeed() operation. So, subclasses need to implement computeFeed() only. 2011-07-13 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/charts/CrossSectionApp.java: New. Standalone Swing-App to test cross sections from database without the hassles of our complete software stack. Runnable from a maven environment: $ mvn -e \ -Dflys.backend.user=DB_USER \ -Dflys.backend.password=DB_PASSWD \ -Dflys.backend.url=DB_CONNECTION_URL \ -Dexec.mainClass=de.intevation.flys.artifacts.charts.CrossSectionApp \ exec:java You can set the river to be used with the system property 'river'. Defaults to 'Mosel'. * src/main/java/de/intevation/flys/artifacts/model/WSPLGENFacet.java: Removed superfluous imports. 2011-07-13 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/winfo.xml: The FloodMapState has a new Outputmode called "floodmap" now. * src/main/java/de/intevation/flys/artifacts/model/WSPLGENFacet.java: New. This facet is used to generate WSPLGEN results. * src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java: Added the WSPLGENFacet. * src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: This state will now generate WSPLGENFacets. 2011-07-12 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/geom/Lines.java: Fixed corner case. 2011-07-11 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/geom/Lines.java: New. fillWater() generates a list of wet lines for a given profile and a given water level. 2011-07-08 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: The Outputs created while generating the DESCRIBE document will now have the 'type' member set. * src/main/java/de/intevation/flys/collections/OutputParser.java: Read the 'type' member from DESCRIBE document. 2011-07-06 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/winfo.xml: Removed a typo. 2011-07-06 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/DataFacet.java: DataFacet are now able to store the ID of the state which has created this Facet. * src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java: Initialize DataFacets with the ID of this state. This is necessary to renew the waterlevel data if it is no longer existing in the cache. 2011-07-06 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/ReportFacet.java: A report facet can now store the state's id and the artifact's hash value when it has been created. * src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java: Initialize the ReportFacet and WaterlevelFacet with state id and hash information. This has been necessary to retrieve reports and waterlevels in states after this one - in states that we need to enter for floodmap parameterization. 2011-07-05 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/WaterlevelGroundDifferences.java: Changed the desired UI provider. 2011-07-05 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/winfo.xml: Added the option to continue the waterlevel parameterization with the intent to create flood maps. * src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java: This state is no longer a final state. The user has the option to continue with the parameterization for flood maps based on the current waterlevel. Therefore, this states desires the "continue" UI provider. Clients should recognice this to just step to the next state or display a button that lets the user step to the next state manually. * src/main/java/de/intevation/flys/artifacts/states/FloodplainChoice.java, src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java, src/main/java/de/intevation/flys/artifacts/states/ScenarioSelect.java, src/main/java/de/intevation/flys/artifacts/states/DGMSelect.java, src/main/java/de/intevation/flys/artifacts/states/ProfileDistanceSelect.java, src/main/java/de/intevation/flys/artifacts/states/WaterlevelGroundDifferences.java: New. These states are used to parameterize a further calculation type: flood map. * src/main/resources/messages.properties, src/main/resources/messages_de_DE.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: Required strings for the flood maps states. 2011-07-04 Sascha L. Teichmann <sascha.teichmann@intevation.de> Fix(?) for flys/issue114 * src/main/java/de/intevation/flys/artifacts/model/WQ.java: Make guessing a bit more robust. 2011-07-03 Sascha L. Teichmann <sascha.teichmann@intevation.de> Added the math needed to calculate "W-Differenzen" in "Laengsschnitten". Needs testing! * src/main/java/de/intevation/flys/artifacts/model/NamedObject.java: Made it an interface to be usable in more than one inheritance chain. * src/main/java/de/intevation/flys/artifacts/model/NamedObjectImpl.java: Implements the NamedObject interface and is the new base class of WQ and WKmsImpl. * src/main/java/de/intevation/flys/artifacts/model/WKms.java: New. Interface to associate kms with ws. * src/main/java/de/intevation/flys/artifacts/model/WQKms.java: Changed the base class to NamedObjectImpl. Renamed getKms(int) to getKm(int) to make clear it return a single scalar value and fullfil the WKms interface. * src/main/java/de/intevation/flys/artifacts/model/WKmsImpl.java: New. Implements the WKms interface. Intended to be a lightweight datastore for "zusaetzliche Laengsschnitte" and as results of the WKmsOperations. * src/main/java/de/intevation/flys/artifacts/model/WQ.java: Changed base class to NamedObjectImpl. * src/main/java/de/intevation/flys/artifacts/math/WKmsOperation.java: New. Operations on WKms data. Currently only the SUBTRACTION operation is implemented. This one is needed to calculate the "W-Differenzen". The operation is insensitive about the km directions of the datasets. Missing values are interpolated linear. * src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java, src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: Adjusted to satisfy the signature change of WQKMs. 2011-07-01 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/StyledXYSeries.java: New. This XYSeries stores the style information that should be used to render this series. These information are stored as raw XML documents. A public method can be used to apply those style information to a XYLineAndShapeRenderer. Note: The only two attributes currently supported by StyledXYSeries items are "linesize" and "linecolor". * doc/conf/themes.xml: Added some more basic themes for the four calculation methods. * src/main/java/de/intevation/flys/exports/XYChartGenerator.java: This generator now tries to apply themes for all series contained in the chart. If a series is no instance of StyledXYSeries, the default renderer is used. * src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java, src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java, src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java, src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java, src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: Removed the code that had been introduced to adapt renderers statically. Now, each of these concrete ChartGenerators instantiates StyledXYSeries items to put the curves into the chart. Those items contain style information now! 2011-07-01 Ingo Weinzierl <ingo@intevation.de> flys/issue135 (Diagramm: Trotz abgeschalteter Themen bleiben Beschriftungen bestehen) * src/main/java/de/intevation/flys/exports/XYChartGenerator.java: The way to store datasets has changed. Until this revision, the concrete generators managed their own datasets. E.g. the DischargeLongitudinalSectionGenerator had three datasets: w, q and corrected w. Now, there are just two datasets, managed by this base generator - one dataset for the first Y axis and one dataset for the second Y axis. This makes it easier to remove axes, that have no data to be displayed. All concrete chart generators have to add their XYSeries using two methods: addFirstAxisSeries() and addSecondAxisSeries(). * src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java, src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java, src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java, src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java, src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: Those concrete chart generators no longer manage datasets themself but they use the two methods described above, to plot the data to the first or second Y axis. 2011-07-01 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java: Added the option to use a filter to reduce the number of items returned by this service. 2011-06-30 Ingo Weinzierl <ingo@intevation.de> flys/issue159 (WINFO: Radiobutton - Ortsauswahl bei "W für ungleichwertigen Abflusslängsschnitt" entfernen) * doc/conf/artifacts/winfo.xml: Changed the kilometer range input for calculation 4. This calculation type requires a kilometer range. So, after choosing the calculation 4, the transition model leads to a state that just allows the input of a kilometer range with no option to enter locations. * src/main/java/de/intevation/flys/artifacts/states/ComputationRangeState.java: New. A base state for the kilometer selection for calculations. The target of this state is to provide facets for the duration curves. * src/main/java/de/intevation/flys/artifacts/states/DistanceSelect.java: New. This state is used to enter a kilometer range. The difference to the LocationDistanceSelect state is, that there is no option to enter locations. * src/main/java/de/intevation/flys/artifacts/states/RangeState.java: Improved this state to be the base state for calculation ranges. * src/main/java/de/intevation/flys/artifacts/states/LocationSelect.java src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java * src/main/java/de/intevation/flys/artifacts/states/WQSelect.java: This state no longer inherits from RangeState which now is used as base state for kilometer ranges. * src/main/resources/messages.properties, src/main/resources/messages_de_DE.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: Added new i18n strings for the DistanceSelect state. 2011-06-28 Sascha L. Teichmann <sascha.teichmann@intevation.de> * pom.xml: Downgraded Trove to 1.1-beta-5, because the new later ones are removed from the maven repos. The functionality we need is in 1.1 so this downgrade should cause no problems. Would be nice if we would support the maintainers of trove to bring there new versions back into the main maven repos. 2011-06-28 Ingo Weinzierl <ingo@intevation.de> * pom.xml: Repaired the JBoss repository which place has changed. 2011-06-28 Ingo Weinzierl <ingo@intevation.de> Tagged RELEASE 2.4 2011-06-27 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/WaterlevelExporter.java, src/main/java/de/intevation/flys/exports/WstWriter.java: Append the corrected W column (if existing) to the WST export. 2011-06-27 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WQ.java: Guessing increaing w is not based on direct neighbors any more. The second to be compared with is choosen by random of the values before the first one. This makes the guessing more robust against 'plateaus' of equal w values. 2011-06-27 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/exports/ATWriter.java: Array for constructing the spline was too large leading to non-increasing values. 2011-06-27 Sascha L. Teichmann <sascha.teichmann@intevation.de> Fix for flys/issue150 * src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java, src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: Invert the x axis if its guessed that water is increasing. 2011-06-27 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WQ.java(guessWaterIncreasing): Added a method to guess based on a given factor of the size (default 0.05) if the water levels are increasing. Needed to determine in which direction the water level curve should be orientated. Based on random to avoid running over large dataset each time a diagram is generated. 2011-06-27 Ingo Weinzierl <ingo@intevation.de> flys/issue177 (WINFO: Abflusskurven am Pegel verursachen ein Hängen des Servers) * src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java: Commented out code to generate time ranges for series names. There seems to be a problem while loading the discharge tables of a gauge or while determining the start and/or end time of such discharge tables. 2011-06-26 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/**/*.java: Removed trailing whitespace. 2011-06-26 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Removed dead code. 2011-06-26 Sascha L. Teichmann <sascha.teichmann@intevation.de> Fix for flys/issue173 * src/main/java/de/intevation/flys/artifacts/model/Calculation4.java: Fixed the way the gauge was found for a given interval. The old way does not work because it was just tested if the station point was inside the segments which is not necessarily true. The obvious solution to simply check the overlapping intervals does not work either because the gauge ranges touch each other and so more than one gauge are returned in these cases. The River.maxOverlap() is now used to find the gauge with the max overlapping range. 2011-06-26 Sascha L. Teichmann <sascha.teichmann@intevation.de> Fix for flys/issue147 * src/main/java/de/intevation/flys/artifacts/model/Calculation1.java: Removed the 'kmUp' flag. It was an left over from former WSP calculations (w/o ref km) leading to wrong results now. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Don't pass the kmUp flag to the calculation. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added debug output to see the value of 'wq_free'. 2011-06-26 Sascha L. Teichmann <sascha.teichmann@intevation.de> Fix for flys/issue86 * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: The reference gauge for calculations "am Pegel" was determined wrong. 2011-06-25 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java: Conversion w->q was broken. This should fix a number of issues around "W am Pegel" calculations. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Issue an error report if a w->q conversion fails. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: The gauge to convert w->q with its discharge table was determined wrong. 2011-06-24 Ingo Weinzierl <ingo@intevation.de> flys/issue174 (Diagramm: Q-Linie wird bei initialem Laden des Diagramms anders dargestellt als bei Ansicht auf gesamten Wertebereich) * src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: The chart will now have upper margins again. 2011-06-24 Ingo Weinzierl <ingo@intevation.de> flys/issue172 (Diagramm: Ursprung der Diagramme bei Dauerzahlen) * src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java: Charts of this type will have the lower X value set to "0". 2011-06-23 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/exports/ATWriter.java: Results are now in cm. Made it more robust against corner cases. * src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java: Removed superfluous import. 2011-06-23 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/artifacts/winfo.xml, doc/conf/conf.xml: Added facet config for AT exports. * src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java: Added 'at' facet type. * src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java: Generate AT facets. 2011-06-23 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/exports/ATExporter.java: New. Exporter for AT facets. Needs testing. 2011-06-23 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/exports/ATWriter.java: New. Writer for AT files. New code because our data model differs from Desktop-FLYS. Needs testing. 2011-06-23 Ingo Weinzierl <ingo@intevation.de> flys/issue157 (Diagramm: Ursprung berechnete Abflusskurve) * src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java, src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java: Moved the method that adjusts the X-axis to include the "0" value from ComputedDischargeCurveGenerator to DischargeCurveGenerator. Now, both charts will include the "0" on the X-axis. 2011-06-23 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WQDay.java: Based on WQ now to make it exportable as AT. 2011-06-23 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WQ.java: New. Base class for WQKms. TODO 1: make it a base class for WQDay, too, TODO 2: Generate instances of WQ instead of WQKms in "Abflusskurven" calculations. This will save memory. AT exporter will get instances of this class as data model * src/main/java/de/intevation/flys/artifacts/model/NamedObject.java: Add default constructor to ease inheritance. * src/main/java/de/intevation/flys/artifacts/model/WQKms.java: Based on WQ now. Removed code allready defined in base class. 2011-06-23 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/artifacts/winfo.xml: Add TODOs for error reports of "Abflusskurven am Pegel". Maybe we don't need them? * doc/conf/conf.xml: Configure report for each calculated output type. 2011-06-22 Ingo Weinzierl <ingo@intevation.de> flys/issue164 (Berechnung 4: Umgekehrtes Berechnungsintervall führt zur) * src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java: Create the items with range information for W and Q which allows the client to validate the user inserted values. 2011-06-21 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Arguments in filling datastructure were flip. Now the "Abflusskurve am Pegel" looks correct again. * src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java: Removed superfluous imports. 2011-06-21 Sascha L. Teichmann <sascha.teichmann@intevation.de> Improved situtation on rendering "Abflusskurve am Pegel". Not fully working, yet. * doc/conf/artifacts/winfo.xml: Generate facets for the location path, too. * src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java: Misspelled the facet which prevented the facets from being to the outputs. * src/main/java/de/intevation/flys/artifacts/model/WaterlevelFacet.java: Extended to store the hash and the state id of the producing artifact/state else it results in NPEs because the data is calculated on later (wrong) states. * src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java: Store the state id and the hash in the facet, too. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Add two method to do calculations for a state the artifact is currently not in and fetching the current state id. 2011-06-21 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/artifacts/winfo.xml: Generate facets for "Abflusskurven am Pegel" Not working by now. :-/ * src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java: New facet type for "Abflusskurven am Pegel" * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Do calculation in the artifact not in the output generator. * src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java: Generate the new facets. * src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java: Fetch data from facet. 2011-06-22 Ingo Weinzierl <ingo@intevation.de> flys/issue161 (Diagramm: Q-Achse in W-Längsschnitten immer bei Q=0) * src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: The Q axis (which is the second y axis) initially contains the 0 value. After a zoom action has taken place, this behaviour is no longer supported. 2011-06-21 Sascha L. Teichmann <sascha.teichmann@intevation.de> Draw correction curve again. * src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java: Use correction curve to map plot to axes. Not doing so prevented the correction curve from being drawn! Smaller code cleanups and simplifications. * src/main/java/de/intevation/flys/artifacts/model/WQKms.java, src/main/java/de/intevation/flys/artifacts/model/WQCKms.java: Added methods to directly access the components w, q and c at a given index. * src/main/java/de/intevation/flys/exports/ChartGenerator.java: Attribute access via DOM instead of XPath. * src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: Code simplification. 2011-06-21 Ingo Weinzierl <ingo@intevation.de> flys/issue157 (Diagramm: Ursprung berechnete Abflusskurve) * src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Splitted up zooming for x and y axes to be able to override specific axis zoom behaviour. * src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java: The lower bound of the x axis (which is the Q axis in such chart) is always 0. 2011-06-21 Ingo Weinzierl <ingo@intevation.de> flys/issue90 (Diagramm: Trennung derDiagrammfläche und Achsenaufheben) * src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Added a margin between chart data and chart axes. 2011-06-21 Sascha L. Teichmann <sascha.teichmann@intevation.de> Fix for flys/issue158 * src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionExporter.java: Checks for right class now. 2011-06-21 Sascha L. Teichmann <sascha.teichmann@intevation.de> Fix for flys/issue154 * src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java: Checks for right class now. 2011-06-21 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Only generate 'outs' if they have facets. * src/main/java/de/intevation/flys/exports/ChartExportHelper.java: 'boolean ? true : false' <=> 'boolean' 2011-06-21 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Added the time-to-live to the DESCRIBE document. 2011-06-20 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/artifacts/winfo.xml: Configured states to generate report facets. 2011-06-20 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/ReportFacet.java: Return the report. * src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java, src/main/java/de/intevation/flys/artifacts/states/DischargeLongitudinalSection.java, src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java, src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java: Generate report facets if there are problems with the calculations. TODO: Adjust winfo.xml to configure the facets. 2011-06-20 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/exports/ReportGenerator.java: New. Generator for calculation reports. * doc/conf/conf.xml: Added ReportGenerator. * src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java: Added type 'report'. * src/main/java/de/intevation/flys/artifacts/model/ReportFacet.java: Specialized facet for serving reports. TODO: Added them to the calculation states. * src/main/java/de/intevation/flys/artifacts/model/Calculation.java: Looped through CallMeta for i18n purposes. TODO: do i18n * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Removed superfluous import. * src/main/java/de/intevation/flys/exports/AbstractExporter.java: Added some override annotations. 2011-06-20 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/CalculationResult.java: New. Used to transport the data and the error report. * src/main/java/de/intevation/flys/artifacts/model/WaterlevelFacet.java, src/main/java/de/intevation/flys/artifacts/model/Calculation1.java, src/main/java/de/intevation/flys/artifacts/model/Calculation2.java, src/main/java/de/intevation/flys/artifacts/model/Calculation3.java, src/main/java/de/intevation/flys/artifacts/model/Calculation4.java, src/main/java/de/intevation/flys/artifacts/model/DurationCurveFacet.java, src/main/java/de/intevation/flys/artifacts/model/Calculation.java, src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java, src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java, src/main/java/de/intevation/flys/artifacts/states/DischargeLongitudinalSection.java, src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java, src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java, src/main/java/de/intevation/flys/exports/WaterlevelExporter.java, src/main/java/de/intevation/flys/exports/DurationCurveExporter.java: Use the CalculationResult now. 2011-06-18 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/Calculation1.java: Allow an explicit reference km to enable calculation "am Pegel". * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: If a calculation "am Pegel" is done, take start km of the calculation range and find the gauge in which range it is located. Take the station of the gauge as the reference km. If no gauge is found the calcualtion falls back to calculation "auf freier Strecke". * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Replaced another inefficient attribute extraction via XPath with direct DOM access. 2011-06-18 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java, src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java, src/main/java/de/intevation/flys/exports/WaterlevelExporter.java, src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: Removed dead code. 2011-06-18 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/DataFacet.java src/main/java/de/intevation/flys/artifacts/model/WaterlevelFacet.java, src/main/java/de/intevation/flys/artifacts/model/DurationCurveFacet.java, src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java, src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java, src/main/java/de/intevation/flys/artifacts/states/DischargeLongitudinalSection.java, src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java, src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java, src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Only generate facets when needed. * src/main/java/de/intevation/flys/collections/OutputParser.java: Removed more XPath for simply accessing attributes of an element. * doc/conf/cache.xml: 200 elements in memory for "computed.values" are enough, LRU as eviction strategy is sufficent. * src/main/java/de/intevation/flys/collections/AttributeWriter.java, src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Use more 'standard' Java naming conventions. 2011-06-17 Sascha L. Teichmann <sascha.teichmann@intevation.de> Merged in the facet-slt branch to bring in the 'facet' feature. * doc/conf/artifacts/winfo.xml: Fixed some facets. * doc/conf/cache.xml: Added a "computed.values" cache to store the results of the WINFO calculations. * src/main/java/de/intevation/flys/artifacts/model/ManagedFacet.java: Add support for index per facet to make them unique and identifiable. * src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java: New. Inteface to be used to access the facet names of the configuration. * src/main/java/de/intevation/flys/artifacts/model/DataFacet.java: New. A facet to be used to have raw access to the computed data of an artifact. Useful to export things like CSV and WST. * src/main/java/de/intevation/flys/artifacts/model/WaterlevelFacet.java: New. Specialized facet to access the water level data stored in WQKms arrays. * src/main/java/de/intevation/flys/artifacts/model/DurationCurveFacet.java: New. Specialized facet to access the duration data stored in WQDay data structures. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Facets are now generated dynamically from the current available ones stored with the artifact. * src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: Added methods computeAdvance() and computeFeed() called if artifact is fed or adance. This overwritten in subclasses to do the state depending calculations. * src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java, src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java, src/main/java/de/intevation/flys/artifacts/states/DischargeLongitudinalSection.java, src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java, src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java: These states overwrites the computeAdvance() and computeFeed() methods to do the corresponding WINFO calculations. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Calls computeAdvance() and computeFeed() if artifact is fed or advanced. Centralized the caching mechanism. * src/main/java/de/intevation/flys/exports/AbstractExporter.java, src/main/java/de/intevation/flys/collections/AttributeParser.java, src/main/java/de/intevation/flys/collections/OutputParser.java, src/main/java/de/intevation/flys/collections/AttributeWriter.java, src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Adjusted the code to cope with the indices of the facets. Used DOM to access the attributes instead of XPath. Removed smaller bugs concerning position generation. * src/main/java/de/intevation/flys/exports/ChartInfoGenerator.java, src/main/java/de/intevation/flys/exports/ChartGenerator.java, src/main/java/de/intevation/flys/exports/OutGenerator.java: Forwarded facet references. * src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java, src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java, src/main/java/de/intevation/flys/exports/DurationCurveExporter.java, src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionExporter.java, src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java, src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java, src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java, src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java, src/main/java/de/intevation/flys/exports/WaterlevelExporter.java: Uses facets to fetch data and generate output now. 2011-06-17 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/winfo.xml: Added a new parameter "wq_free" that determines the mode of calculation 1. If it is "false" (default), the calculation should be bound to a gauge. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added a method to retrieve the information about the "wq_free" parameter. 2011-06-17 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/winfo.xml: Added a facet for corrected W in computation 4. 2011-06-14 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java: Got rid of namespace in result document. 2011-06-14 Ingo Weinzierl <ingo@intevation.de> flys/issue77 (Diagramm: Beschriftung der Kurven bei Dauerlinien) * src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java: Give the curves in the chart names. * src/main/resources/messages.properties, src/main/resources/messages_de_DE.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: Added titles for duration chart curves. 2011-06-14 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java: Write top 'Oberkante' and bottom 'Unterkante' to out going XML if they exist. 2011-06-14 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java: Write the min/max W/Q ranges as art:range elements into the DESCRIBE. 2011-06-14 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/LocationSelect.java: This state that is used to retrieve locations will now write the kilometer range of the selected river into the DESCRIBE document. 2011-06-10 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/Calculation1.java: New. Factored out version of "Wasserspiegellage" calculation. * src/main/java/de/intevation/flys/artifacts/model/WQKms.java: Removed some dead code. * src/main/java/de/intevation/flys/artifacts/model/WQCKms.java: Added Override annotation and used quick access method. * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: Looped through error reporting use by interpolate. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Used factored out version of calculation 1. Removed dead code. 2011-06-10 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/Calculation2.java: New. Factored out version of "Abflusskurve". * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: Loop errors through w/q at km interpolation. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Use factored out version of calculation 2. 2011-06-10 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/Calculation3.java: New. Factored out version of "Dauerzahlen". * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: Loop errors through for q->w interpolations. * src/main/java/de/intevation/flys/artifacts/model/WQDay.java: Added constructor to directly create with calculated results. * src/main/java/de/intevation/flys/artifacts/model/Calculation.java: Added method to return the number of problems. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Use factored out version of calculation 3. 2011-06-10 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WQKms.java, src/main/java/de/intevation/flys/artifacts/model/WQCKms.java, src/main/java/de/intevation/flys/artifacts/model/WQDay.java: Added methods to remove NaN values. 2011-06-10 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/Calculation.java: New. Base class for calculations. Used to collect problems occuring during calculation. * src/main/java/de/intevation/flys/artifacts/model/Calculation4.java: Extends Calculation now. Looped through the problem reports to base class. * src/main/java/de/intevation/flys/artifacts/math/BackJumpCorrector.java: Looped through the problem reports. 2011-06-09 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/InfoGeneratorHelper.java: Append the min/max range and a transformation matrix for each axis. * src/main/java/de/intevation/flys/exports/ChartInfoGenerator.java: Instantiate the InfoGeneratorHelper with a XYChartGenerator instance. * src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Changed the zoom operation. The zoom values defined in the chart request document are no longer absolute values for a specific axis. Those values represent percental values for the start and end point of x and y axes. E.g. a chart has three axes with the following ranges: - x axis : 0 - 10 - y axis 1: 20 - 40 - y axis 2: 40 - 90 - zoom values for x: 0.1 - 0.9 (10% - 90%) - zoom values for y: 0.2 - 0.8 (20% - 80%) The produced chart will have the following ranges: - x axis : 1 - 9 - y axis 1: 24 - 36 y axis 2: 50 - 80 2011-06-09 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java, src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java: Map datasets to axes correctly. 2011-06-08 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/Calculation4.java: Determine the gauges by their station positions. This hopfully fixes the problem with wrong assigned gauges and invalid segments. 2011-06-08 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/Segment.java, src/main/java/de/intevation/flys/artifacts/model/Calculation4.java: Added more debug output. 2011-06-08 Ingo Weinzierl <ingo@intevation.de> flys/issue103 PART 1 (WINFO: Wasserspiegellagenberechnung / Layout-Inkonsistenz) * src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: Selected values are formatted with the current locale. The static part of the DESCRIBE document will now contain i18n formatted numbers. 2011-06-08 Ingo Weinzierl <ingo@intevation.de> flys/issue93 (WINFO: Benennung der Berechnungsart korrigieren) * src/main/resources/messages_de_DE.properties, src/main/resources/messages_de.properties: Changed the name of calculation 4. 2011-06-08 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Made the range determination more robust against NaN values. 2011-06-08 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: The second y axis is set to position "1". It was set to "2" before, but in that case, there was no position "1". 2011-06-08 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/exports/WaterlevelExporter.java, src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java, src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionExporter.java, src/main/java/de/intevation/flys/exports/DurationCurveExporter.java, src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java, src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java, src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java: s@m³/s@m\\u00b3/s@ 2011-06-08 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/exports/InfoGeneratorHelper.java: Only generate an axis element if a axis really exists. 2011-06-07 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/math/BackJumpCorrector.java: Simpified array swapping. 2011-06-07 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java, src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Use java.util.List instead of java.util.Vector * src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java, src/main/java/de/intevation/flys/artifacts/states/DischargeLongitudinalSection.java, src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java, src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Removed superfluous imports. 2011-06-07 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: createItem() is not abstract any longer to avoid code repetitionin sub classes. * src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java, src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java, src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java, src/main/java/de/intevation/flys/artifacts/states/WQSelect.java, src/main/java/de/intevation/flys/artifacts/states/DischargeLongitudinalSection.java, src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java, src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java, src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java: Removed duplicated code, inserted default constructors and Override annotations. 2011-06-07 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/InfoGeneratorHelper.java: Append axes range information to the info document. 2011-06-07 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: If feed() fails do not store invalid values in database. 2011-06-06 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/exports/InfoGeneratorHelper.java: Removed asymmetrical "- 1" from width calculation. 2011-06-05 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/Calculation4.java: Fixed problem when more than one value per segment are given. 2011-06-05 Sascha L. Teichmann <sascha.teichmann@intevation.de> Refactored version of "Berechnung 4" * src/main/java/de/intevation/flys/artifacts/model/Segment.java: Added instance fields for a reference point (= location of gauge) and backup of values (needed for naming). * src/main/java/de/intevation/flys/artifacts/model/WQCKms.java: Added a constructor to be created from a WQKms. This is helpful if a WQKms is replaced by a back jump correction. * src/main/java/de/intevation/flys/artifacts/model/Calculation4.java: New. Outfactored version of "W bei ungleichmaessigen Abflusslaengsschnitt". Much cleaner now and it should have a better handling of the corner cases. * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: Removed the linear interpolation stuff. It is now in Linear. Removed the LinearRemap interpolation method because it is not needed any longer. Added a method to interpolate a given km with a given function. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Removed the old calc 4 and used the new one. * src/main/java/de/intevation/flys/artifacts/math/LinearRemap.java: Deleted. Not needed any longer. * src/main/java/de/intevation/flys/artifacts/math/Function.java: New. Interface for a uni-variate real function. * src/main/java/de/intevation/flys/artifacts/math/Identity.java: New. Implements Function with f(x) = x * src/main/java/de/intevation/flys/artifacts/math/Linear.java: New. Implements Function with f(x) = m*x + b * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Factored some stuff out to DoubleUtil. Removed some dead code. Does some rounding correct. * src/main/java/de/intevation/flys/utils/DoubleUtil.java: New. Centralized utils surrounding common double operations. * src/main/java/de/intevation/flys/exports/ChartInfoGenerator.java: Removed superfluous imports. 2011-06-03 Ingo Weinzierl <ingo@intevation.de> flys/issue90(Diagramm: Trennung der Diagrammfläche und Achsen aufheben) * src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Determine the ranges of x and y axes. If no zoom ranges are given, we will determine the min and max xy values in the dataset manually, because JFreeCharts adds a margin to the left and right of the data area automatically.. 2011-06-03 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Moved the chart creation into an own public method. This lets the ChartInfoGenerator create charts without duplicating code. * src/main/java/de/intevation/flys/exports/ChartInfoGenerator.java: Limited the possible class for generators to XYChartGenerator. This enables the ChartInfoGenerator class to do the whole chart creation stuff itself without outsourcing the code to concrete subclasses. * src/main/java/de/intevation/flys/exports/LongitudinalSectionInfoGenerator.java, src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionInfoGenerator.java, src/main/java/de/intevation/flys/exports/DurationCurveInfoGenerator.java, src/main/java/de/intevation/flys/exports/DischargeCurveInfoGenerator.java, src/main/java/de/intevation/flys/exports/ComputedDischargeCurveInfoGenerator.java: Removed the code to generate charts - this is done in ChartInfoGenerator now. 2011-06-03 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/ChartGenerator.java: Added new methods to extract the x and y ranges from request document. * src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Added a method that zooms the chart to the specified x and y ranges. 2011-06-02 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/conf.xml: Set collection ttl to 6 hours. 2011-06-01 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/Segment.java: New. Parse segments only once. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Expose new parser to artifacts. TODO: Use it. 2011-06-01 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: Changed interpolation methods to interpolate to an arbitrary position in a given double result array as a preparation for segment independent calculation. * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Removed superfluous import. * src/main/java/de/intevation/flys/artifacts/math/BackJumpCorrector.java: Fixed cause for crashing: Run back too far in some siutations. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Refactored range code a bit. Needs more work. 2011-06-01 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/InfoGeneratorHelper.java: Interchange the lower and upper x value of the chart if the x-axis is inverted before the matrix values are computed. Now, the matrix is able to work with charts that have an inverted x-axis. 2011-06-01 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/ChartInfoGenerator.java: New. A chart info generator generates a document that contains meta information for a specific chart. Concrete instances of this abstract class need to instantiate concrete ChartGenerators and dispatch nearly all methods of an OutGenerator (init(), doOut(), setMaster()) to this instance. The generate() method is implemented in the ChartInfoGenerator itself. It creates a chart with help of the ChartGenerator instance and builds a document that contains meta information of this chart. * src/main/java/de/intevation/flys/exports/InfoGeneratorHelper.java: New. This helper is used to create the chart info document. At the moment, the only information that is included in this document is a transformation matrix to transform image coordinates into chart coordinates. NOTE: The transformation matrix creation needs some work to support charts with inverted X axis. * src/main/java/de/intevation/flys/exports/LongitudinalSectionInfoGenerator.java, src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionInfoGenerator.java, src/main/java/de/intevation/flys/exports/DurationCurveInfoGenerator.java, src/main/java/de/intevation/flys/exports/DischargeCurveInfoGenerator.java, src/main/java/de/intevation/flys/exports/ComputedDischargeCurveInfoGenerator.java: Concrete instances of ChartInfoGenerator that create the chart info for the currently supported chart types. * doc/conf/conf.xml: Registered new OutGenerators. 2011-05-31 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Added support for the 'type' paramter of the collection's out() operation. 2011-05-31 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java, src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: Use an explicit reference km for interpolation now. 2011-05-30 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/cache.xml: Introduced cache to store the distance info per river. This boosts performance in following ab setup from 3.61 to 39.91 requests/secs. $ ab -c 20 -n 1000 -p distances.xml http://127.0.0.1:8181/service/distanceinfo $ cat distances.xml <?xml version="1.0" encoding="UTF-8"?> <art:river xmlns:art="http://www.intevation.de/2009/artifacts">Elbe</art:river> * src/main/java/de/intevation/flys/artifacts/model/AnnotationsFactory.java: Added an iterator result to avoid construction expensive interim lists. * src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java: Use the cache if configured. 2011-05-30 Sascha L. Teichmann <sascha.teichmann@intevation.de> flys/issue82 * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Only successful interpolations are named. 2011-05-27 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/math/BackJumpCorrector.java: Make it work independent of river flow direction. * src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java: Fixed bug in ordering segments * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Re-enabled calculation of the back jump correction. Fixed more flow direction issues. 2011-05-27 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Removed call of XMLDebug class which is not in the version control. 2011-05-27 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Moved the code part that skips themes right after the part that sets the master artifact for the OutGenerator. We need this master artifact to display empty charts - master artifact is used to create titles and axes. 2011-05-27 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Deactivated themes are not put into the chart. 2011-05-27 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/AttributeParser.java: Repaired broken XPath expressions to find the output modes in an attribute document of a collection. * src/main/java/de/intevation/flys/collections/AttributeWriter.java: This writer will now create a document that has a root node art:attribute. Before these changes, the document's root node was art:outputs which is part of the attribute document but not the right root node. * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Adapted some XPath expressions and corrected the the process to create attribute documents. 2011-05-26 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/math/LinearRemap.java: Made it work independent of from/to order. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added method to extract the ranges correctly from data. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Use the correct ranges. Comment out backjump detection temporarily. 2011-05-26 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java: Generate fields for w/q input depend on flow direction. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Moved km up question out of loop. 2011-05-26 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Take the flow direction into account. * src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: Prevent NPE. * src/main/java/de/intevation/flys/artifacts/states/RangeState.java: Allow to be 'from' greater than 'to' in ranges. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Negate step if 'from' is greater than 'to'. 2011-05-26 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Round exploded values to a precision of 1e-6. 2011-05-25 Sascha L. Teichmann <sascha.teichmann@intevation.de> Qs are now stored in ranges for each column. * src/main/java/de/intevation/flys/artifacts/model/WstValueTableFactory2.java: Deleted. * src/main/java/de/intevation/flys/artifacts/model/WstValueTableFactory.java: Was WstValueTableFactory2. * src/main/java/de/intevation/flys/artifacts/model/QRangeTree.java: Fixed node linking bug. Removed dead code. * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: Q values are now stored in range trees by each column. The qs of the rows are removed and the calculations are adjusted. Removed dead code. 2011-05-24 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WstValueTableFactory.java: Moved cache name to WstValueTableCacheKey. Do not cache null references. * src/main/java/de/intevation/flys/artifacts/model/WstValueTableCacheKey.java: Moved cache name into this class. * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: Store QRangeTree for each column of value table. TODO: Use them! * src/main/java/de/intevation/flys/artifacts/model/WstValueTableFactory2.java: Intended as a replacement for WstValueTableFactory, but is work in progress. * src/main/java/de/intevation/flys/artifacts/model/QRangeTree.java: Fixed index errors and added methods to dump as graphviz graph. 2011-05-24 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/WQSelect.java: Improved the validation of WQ values. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Use the correct input data object to determine the selected WQ mode (range or single input). 2011-05-24 Ingo Weinzierl <ingo@intevation.de> ISSUE-40 (part I/II) * src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: Write default values (values already selected by the user before) of the input data items into DESCRIBE. 2011-05-24 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java: Removed needless imports. 2011-05-24 Ingo Weinzierl <ingo@intevation.de> ISSUE-85 (part III/III) * src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java: Added a static function that returns the kilometer values (double[]) from locations input (whitespace separated double values). * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Adapted the getKms() method. It will now return a computed array of kilometers if we had inserted a range, or it will return the inserted kilometers if we had inserted locations. 2011-05-24 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WstValueTableFactory.java: Moved cache key to separate class. * src/main/java/de/intevation/flys/artifacts/model/WstValueTableCacheKey.java: New. The new cache key class. 2011-05-24 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/QRangeTree.java: Model to store the q values of a WST column efficiently. First building block not to store the q values directly aside the w values. 2011-05-24 Ingo Weinzierl <ingo@intevation.de> ISSUE-85 (part I/III) * doc/conf/artifacts/winfo.xml: Added two further field 'ld_mode' and 'ld_locations' to the range/locations state to track the selected mode and locations. * src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java: Added methods to validate the user inserted locations. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added a method to determine of a range or locations have been inserted. 2011-05-23 Ingo Weinzierl <ingo@intevation.de> ISSUE-62 (part II/II) * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Dump the artifacts state/data in DEBUG mode in describe(). * src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java, src/main/java/de/intevation/flys/artifacts/states/DefaultState.java, src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java, src/main/java/de/intevation/flys/artifacts/states/WQSelect.java, src/main/java/de/intevation/flys/artifacts/states/LocationSelect.java, src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java, src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java: States will no longer store data. The only reason for states storing StateData is to know about the necessary data for this state. If a State needs to access the user input for a specific StateData object, it needs to query the FLYSArtifact which stores the data. 2011-05-23 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added a method to dump the artifacts state(s)/data. 2011-05-23 Sascha L. Teichmann <sascha.teichmann@intevation.de> flys/issue84 * src/main/java/de/intevation/flys/artifacts/model/WstFactory.java: Forget to select wst kind. 2011-05-20 Sascha L. Teichmann <sascha.teichmann@intevation.de> flys/issue81 * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: weights for kms were swapped. 2011-05-20 Ingo Weinzierl <ingo@intevation.de> Tagged RELEASE 2.3.1 2011-05-20 Ingo Weinzierl <ingo@intevation.de> * Changes: Prepared changes for the upcoming release. 2011-05-20 Hans Plum <hans@intevation.de> * NEWS: Hint to Release 2.3.1. For further information look into module flys-client/NEWS 2011-05-19 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java (getExplodedValues): Increment kms array size by one to take the end of range, too. 2011-05-19 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WstValueTableFactory.java: Sort by rows (should not be necessary). * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: Use unsharp km lookup (epsilon = 0.0001). This fixes the problem that some kms were not found. 2011-05-19 Ingo Weinzierl <ingo@intevation.de> flys/issue66 * src/main/resources/messages_en.properties: Fixed broken template. 2011-05-19 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Set the name of the computed discharge curve objects. * src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java: The curves of this chart will now have names that consist of the word 'Discharge Curve', the river name and the kilometer that has been used for the computation. * src/main/resources/messages.properties, src/main/resources/messages_de_DE.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: Added i18n strings for the computed discharge curves. 2011-05-19 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added convenience method isQ() to determine if we are doing Q calculations. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Reintroduced titles for the "W for unausgeglichene Abfluesse". 2011-05-19 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java: The curves will now have names that consist of the gauge name and its valid time range. * src/main/resources/messages.properties, src/main/resources/messages_de_DE.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: Added i18n strings for the discharge curves. 2011-05-19 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Removed dead code. 2011-05-19 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Use the correct method to generate kms. * src/main/java/de/intevation/flys/artifacts/math/LinearRemap.java: Added some logging to test the map in debug mode. 2011-05-18 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Made getExplodedValues static. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Use new logic to calculate "W für ungleichwertige Abfluesse". Not working, yet. * ChangeLog: Fixed former entry. 2011-05-18 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/winfo.xml: Registered the WST export for discharge longitudinal sections. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Set the names of the discharge longitudinal section computation results. * src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java: The W/Q curves in the chart will now have names. * src/main/java/de/intevation/flys/exports/WaterlevelExporter.java: The WstWriter is filled with column names in an own method. So, we are able to override this process in subclasses. * src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionExporter.java: Adapted the column names for the WST export. 2011-05-18 Sascha L. Teichmann <sascha.teichmann@intevation.de> Work on flys/issue69 * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Use new logic to calculate "Wasserstand/Wasserspiegellage". Compared to desktop FLYS are the results are structurally right but a bit off in the positions after the decimal points. Maybe a result of the interpolation? Need to debug this. 2011-05-18 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: W and Q curves will now have names based on the defined W or Q values for the waterlevel computation. 2011-05-18 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/NamedObject.java: New. This object is used to give objects a name. * src/main/java/de/intevation/flys/artifacts/model/WQKms.java: Inherit from NamedObject now. Because we need to display names for those objects in different places. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: The WQKms objects returned by a waterlevel computation will now have names. * src/main/java/de/intevation/flys/exports/WaterlevelExporter.java: Insert the column names for the WSTs into the WstWriter. * src/main/java/de/intevation/flys/exports/WstWriter.java: The column names are written into the head of the WSTs now. 2011-05-17 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WstLine.java: New. This class is used to store the W/Q values of a specific kilometer of a WST. * src/main/java/de/intevation/flys/exports/WstWriter.java: New. A writer that creates WSTs. TODO: The header of the WSTs is not finished. The Q descriptions are missing. * src/main/java/de/intevation/flys/exports/WaterlevelExporter.java: Enabled WST exports. * doc/conf/artifacts/winfo.xml: Registered the WST export for waterlevels. 2011-05-17 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/utils/Formatter.java: New. This class supports functions to retrieve formatters for specific types of data used in FLYS. * src/main/java/de/intevation/flys/exports/WaterlevelExporter.java, src/main/java/de/intevation/flys/exports/DurationCurveExporter.java, src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java, src/main/java/de/intevation/flys/exports/AbstractExporter.java: Removed the formatter declaration - the whole formatter stuff is done in Formatter now. 2011-05-17 Ingo Weinzierl <ingo@intevation.de> ISSUE-72 * src/main/java/de/intevation/flys/artifacts/services/MainValuesService.java: Repaired broken XPath expressions to extract start and end kilometer. 2011-05-17 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: Removed the Hibernate loading stuff. * src/main/java/de/intevation/flys/artifacts/model/WstValueTableFactory.java: New. The Hibernate loading. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Use the WstValueTableFactory for loading now. 2011-05-17 Ingo Weinzierl <ingo@intevation.de> Tagged RELEASE 0.1 aka Version 2.3.0 2011-05-16 Hans Plum <hans@intevation.de> * NEWS: New. Giving some user specific perspective to new functionality and changes. This file references releases dates only; details can be find in the client module at flys-client. 2011-05-10 Sascha L. Teichmann <sascha.teichmann@intevation.de> First step to calculate "W fuer ungleichwertige Abfluesse" correctly. flys/issue55 * src/main/java/de/intevation/flys/artifacts/math/LinearRemap.java: New. Remaps "gleichwertige" Q values to the corresponding "ungleichwertige" Q values depending on km. * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: Remap the Q values "ungleichwertig" depending on the "gleichwertige" ones. 2011-05-10 Sascha L. Teichmann <sascha.teichmann@intevation.de> First step to fix flys/issue69 * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: New code path to implement the calculation of "Wasserstand/Wasspiegellage" correctly. TODO 1: Use new path in UI. TODO 2: Remove unused old code. 2011-05-13 Ingo Weinzierl <ingo@intevation.de> * Changes: Prepared Changes for the upcoming release 2.3 - see Changes file to get to know about the changes of the version numbers. 2011-05-13 Ingo Weinzierl <ingo@intevation.de> ISSUE-37 * src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java: This state would be happy if there is a UI provider called "river_panel". 2011-05-11 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/ChartGenerator.java: Added new methods that return the requested chart size as integer array [width, height]. The requested size is read from the incomding request document. * src/main/java/de/intevation/flys/exports/XYChartGenerator.java: The size of a chart is no longer static. The requested size is fetched using ChartGenerator.getSize(). 2011-05-11 Ingo Weinzierl <ingo@intevation.de> ISSUE-52 * src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: The X-Axis of such a chart is inverted, if the head of the river is not at kilometer 0. This type of charts always have the head of the river at the left side. 2011-05-10 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java: Make incoming XML symmetric to DistanceInfoService. 2011-05-10 Ingo Weinzierl <ingo@intevation.de> ISSUE-47 * src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java, src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java, src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: Adjusted temporarily the color of the W, Q and corrected W curves to distinguish each other. 2011-05-10 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Adjusted the plot of xy charts - the gridlines are displayed now. 2011-05-10 Ingo Weinzierl <ingo@intevation.de> ISSUE-53 * src/main/java/de/intevation/flys/artifacts/resources/Resources.java: Added a method that returns the preferred locale based on the available locales of the server and the desired locales of the request (CallMeta). * src/main/java/de/intevation/flys/exports/AbstractExporter.java: Added a method that creates a number formatter with minimum and maximum digits. * src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionExporter.java, src/main/java/de/intevation/flys/exports/WaterlevelExporter.java, src/main/java/de/intevation/flys/exports/DurationCurveExporter.java, src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java: Formatted the number values of the CSV exports. 2011-05-10 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/RangeWithValues.java: New. A data structure that enables us to save a data triple: a range that consist of lower and upper double value and a set of values that belong to this range. * src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java: Implemented the validation of W/Q values. 2011-05-10 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/AbstractExporter.java: New method to retrieve i18n messages based on keys. * src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionExporter.java, src/main/java/de/intevation/flys/exports/WaterlevelExporter.java, src/main/java/de/intevation/flys/exports/DurationCurveExporter.java, src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java: Added headers for CSV exports. * src/main/resources/messages.properties, src/main/resources/messages_de_DE.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: Added new i18n strings for CSV headers. 2011-05-10 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java: Fetches river name from incoming XML document. If no river is given all infos about all rivers are listed. * src/main/resources/metadata/template.xml: Templates honors the 'river' parameter. * src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java: Extended to pass parameters to the templating. Added support for type conversion. * src/main/java/de/intevation/flys/artifacts/services/meta/StackFrames.java: Take parameters as an initial stack frame. * src/main/java/de/intevation/flys/artifacts/services/meta/TypeConverter.java: New. Converts types off stacked variables. 2011-05-10 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Added a method to add subtitles to charts. The implementation in this class does not add any subtitle. Concrete subclasses may override this method to add some. * src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java, src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java, src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java: Add subtitles to charts. * src/main/resources/messages.properties, src/main/resources/messages_de_DE.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: Added i18n templates for compound messages (chart subtitles). 2011-05-10 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/resources/Resources.java: Added new methods to retrieve translated compound messages. 2011-05-10 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/OutGenerator.java: Added a method to set the master artifact that should be used for some special operations. * src/main/java/de/intevation/flys/exports/ChartGenerator.java, src/main/java/de/intevation/flys/exports/AbstractExporter.java: Implement the setMasterArtifact() method of the interface. * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Call OutGenerator.setMasterArtifact(). NOTE: The determination of the master artifact needs to be implemented! 2011-05-10 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Removed hard coded dev code that defined a WQ mode. 2011-05-09 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java: Stripped ugly extra whitespace from output introduced by templating. 2011-05-09 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/resources/metadata/template.xml: Added forgotten columns of fixation WSTs. 2011-05-09 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/ChartGenerator.java: Added a method to retrieve i18n strings. * src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java, src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java, src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java, src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java: Enabled i18n support for chart title and axes labels. * src/main/resources/messages.properties, src/main/resources/messages_de_DE.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: Added i18n strings for the chart types above. 2011-05-09 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionExporter.java: New. This OutGenerator exports the data of a discharge longitudinal section computation. * doc/conf/conf.xml: Added the DischargeLongitudinalSectionExporter. * doc/conf/artifacts/winfo.xml: Added the exporter with CSV facet to the discharge_longitudinal_section state. 2011-05-07 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/math/BackJumpCorrector.java: Added code to make back jump correction work with both potential flow directions. 2011-05-06 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/resources/metadata/template.xml: Added data cage configuration for 'Längsschnitt'. 2011-05-06 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/winfo.xml: Added the missing Q facet for discharge longitudinal sections. * src/main/java/de/intevation/flys/artifacts/model/WQCKms.java: New. A derived dataset to store W/Q values with corrected Ws for a kilometer range. * src/main/java/de/intevation/flys/artifacts/model/WQKms.java: Some new methods and a new constructor to initialize this data object with a predefined set of values. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: New methods to retrieve the W/Q values for the 'discharge longitudinal section' computation. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: New methods to retrieve and compute data used for the 'discharge longitudinal section' computation. 2011-05-05 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java: Bugfix: just write the ranges of gauges into the DESCRIBE if the 'wq_values' data item is required. * src/main/resources/messages.properties, src/main/resources/messages_de_DE.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: Added i18n messages used in the DESCRIBE of the WQAdapted state. 2011-05-05 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java: Changed the title of the y-axis (now 'W [NN+m]'). 2011-05-05 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/winfo.xml: Improved the transition model to reach the output state for creating 'discharge longitudinal section' charts. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added a method that returns all gauges of the selected river based on a the given kilometer range. * src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java: New. This state creates a set of elements for the DESCRIBE that consist of a tuple of kilometer values. The number of elements depend on the number of gauges intersected by the given kilometer range. * src/main/java/de/intevation/flys/artifacts/states/DischargeLongitudinalSection.java: New. This state is the output state that is reached after the 'discharge longitudinal section' computation has been chosen. 2011-05-05 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Default step width between two kilometers added - if no step width is given, this default width is used. 2011-05-05 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: Fixed a potential NullPointerException if there is just a single kilometer given to create a longitudinal section. 2011-05-04 Sascha L. Teichmann <sascha.teichmann@intevation.de> * pom.xml: Added http://repository.jboss.org/maven2 repo to fix flys/issue30 2011-05-04 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: To make diagram generation possible ws are now generated from qs because they are many ws having different qs. 2011-05-04 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java: Fetch the WQ data from WINFO artifact and write those values into the CSV export. 2011-05-04 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Added methods to compute and retrieve the data for discharge curves (computed). * src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java: Fetch the computed discharge curve data from WINFOArtifact and add the values into the JFreeChart dataset. 2011-05-04 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/winfo.xml: Added new transitions and states to enable the WINFO artifact for computing discharge curves. * doc/conf/conf.xml: Added OutGenerators that generate computed discharge curves and exports for its data. * src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java: New. This state is reached if the user chose the computed discharge curve. * src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java: New. This is only a stub implementation at the moment. This OutGenerator should create computed discharge curves later. It extends the DischargeCurveGenerator which should do the same stuff for discharge curves for gauges. * src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java: New. This is only a stub implementation at the moment. This OutGenerator should create the exports of the discharge curve computation. 2011-05-03 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/winfo.xml: Added a new output mode for the duration curve state (CSV export). * doc/conf/conf.xml: Added a new OutGenerator to export duration curve computations. * src/main/java/de/intevation/flys/exports/AbstractExporter.java: New. This abstract OutGenerator represents the base class for exporting computed data. Currently, the CSV export is supported. * src/main/java/de/intevation/flys/exports/WaterlevelExporter.java: Moved the most code to export to CSV into the AbstractExporter. * src/main/java/de/intevation/flys/exports/DurationCurveExporter.java: New. This exporter exports the computed data of a duration computation. 2011-05-03 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Modified a wrong debug statement which would confuse the user. 2011-05-03 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/winfo.xml: Added a new output mode for the waterlevel state (CSV export). * doc/conf/conf.xml: Added a new OutGenerator to export waterlevels. * src/main/java/de/intevation/flys/exports/WaterlevelExporter.java: New. This OutGenerator exports the data of a waterlevel computation. Note: It is necessary to specify the desired facet (e.g. 'waterlevel_export.csv'). * pom.xml: Added a dependency to OpenCSV. 2011-05-03 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Introduced an "export" output target. If the target is "export", a facet (read from the incoming xml document) is a necessary parameter that determines which facets are written to the output. 2011-05-03 Ingo Weinzierl <ingo@intevation.de> * src/main/resources/messages_en.properties: Bugfix: replaced german string (copy & paste mistake). 2011-05-03 Ingo Weinzierl <ingo@intevation.de> * src/main/resources/messages.properties, src/main/resources/messages_de_DE.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: Added new i18n strings for for the location selection. 2011-05-03 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java: New. An OutGenerator for creating duration curves. * src/main/java/de/intevation/flys/artifacts/model/WQDay.java: New. A model class to store necessary data for creating W and Q facets of a duration curve. This model stores W, Q and Days. * src/main/java/de/intevation/flys/artifacts/model/MainValuesFactory.java: Added a function to retrieve tuples of (day, q) based on a given gauge - these tuples are necessary for creating duration curves. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Added methods to compute and retrieve the data necessary for creating duration curves. * src/main/java/de/intevation/flys/artifacts/states/LocationSelect.java: Bugfix: improved the access to the location array (avoid NullPointerException). * doc/conf/conf.xml: Registered the new OutGenerator for duration curves. 2011-05-03 Sascha L. Teichmann <sascha.teichmann@intevation.de> * contrib/visualize-transitions.xsl: State quoting was done wrong. 2011-05-02 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/winfo.xml: Enhanced the transition model to reach the final state for creating duration curves. * src/main/java/de/intevation/flys/artifacts/states/LocationSelect.java: New. This state should be reached to just insert an array of locations. * src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java: New. This state is reached if the duration curve calculation is selected. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Adjusted getDistance() so that it takes care on inserted locations - not just inserted ranges. 2011-05-02 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/cache/CacheFactory.java: Flush/persist caches at program exists. * src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: Commented out too eloquent debug output. 2011-05-02 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java: Uses the methods of FLYSArtifact to retrieve the necessary information rivername and selected distance. 2011-05-02 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: Added interpolateW method to take reference to result ws array as an argument to avoid expensive array allocations in km iterating loops. * src/main/java/de/intevation/flys/artifacts/model/WQKms.java: Added a constructor to create backing trove datastructure with the right capacity. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Move allocation of result ws out of km loop. 2011-05-02 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/winfo.xml: Added two further data items in the WQ selection state. Those items are necessary to store the information about the selected mode (range/single selection) and the values of the single selection. * src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: If there is no value for a data item, this item is not written into the static DESCRIBE part. * src/main/java/de/intevation/flys/artifacts/states/RangeState.java, src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java: Renamed the method to validate upper and lower values. * src/main/java/de/intevation/flys/artifacts/states/WQSelect.java: This state can now handle values inserted in the single selection. Therefore, new validate methods has been added. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: The methods getWs() and getWs() take care on the values inserted in the single insert mode of the client which enables the user to insert single W and Q. 2011-05-02 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java: Repaired getQForW() by calculating indices on right dimension. 2011-05-02 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: New methods for retrieving selected W values (getWs()). * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: The method for retrieving waterlevel data takes care on selected Ws, now. The selected Ws are transformed using the DischargeTables.getQForW() into Q values. 2011-05-02 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java: Removed an unused parameter 'result' of getQForW(). 2011-05-02 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Removed the getDataset() method and replaced it with a addDataset() method. On this way, concrete subclasses of this OutGenerator can have multiple datasets (e.g. different datasets for W and Q). This abstract method is called after the chart generation is finished. * src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java, src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java: Both classes implement the addDataset() method. The LongitudinalSectionGenerator has already multiple datasets for W and Q. Both are added to the chart - both have an own range axis. 2011-05-01 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: Use the cache for the wst value table if configured. * doc/conf/cache.xml: Choose a more precise name for the wst value table cache. 2011-04-29 Sascha L. Teichmann <sascha.teichmann@intevation.de> * pom.xml: Added dependency to Ehcache. Apache 2.0 license. * doc/conf/conf.xml: Added configuration of ehcache. * doc/conf/cache.xml: New. Cache configurations. * src/main/java/de/intevation/flys/artifacts/cache/CacheFactory.java: New. Factory to access caches. 2011-04-29 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java: Forgot to add. * src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java: New. Given a database connection and a XML template it generates an output with meta data about the database. * src/main/java/de/intevation/flys/artifacts/services/meta/CompiledStatement.java: New. Holds prepared statements optimized to be run in the stack of contextes. * src/main/java/de/intevation/flys/artifacts/services/meta/StackFrames.java: New. Model to hold a hierarchical scope of variables. * src/main/java/de/intevation/flys/artifacts/services/meta/ResultData.java: New. Stores data set fetched from a sql select to be iterated in a context. * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java, src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Removed superfluous imports. 2011-04-29 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/conf.xml: Added meta data service. * src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java: Stub for the meta data service. * src/main/resources/metadata/template.xml: Initial template for the meta data service. 2011-04-29 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Bugfix: Now, curves for Q values are drawn into a longitudinal section chart as well. Therefore, it was necessary to change the datastructure of the inner class ThemeList that stores all themes included in a chart in an ordered list (stored in a java.util.Vector now). 2011-04-29 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/XYChartGenerator.java: New. An abstract base class for ChartGenerators that create XY charts. * src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java: Sourced the generate() method out to the XYChartGenerator. * src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: Implemented the methods to add W and Q facets to the chart. 2011-04-29 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Improved the calculation of the step with for ranges. 2011-04-29 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WQKms.java: Added a method that returns the number of elements stored in the data pool. 2011-04-29 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WQKms.java: Added a get() method which takes destination array as an argument. 2011-04-29 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WQKms.java: Changed the data structure to store w, q and kms values from List<Double> to TDoubleArrayList which stores native double values instead of big Double values. * pom.xml: Added the GNU Trove dependency. 2011-04-29 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/OutGenerator.java: Added the name a the requested facet to doOut(). Concrete generators should just create output for this facet now. * src/main/java/de/intevation/flys/exports/ChartGenerator.java, src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java, src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java: Adapted the method signature of doOut(). * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Adapted the method call of OutGenerator.doOut(). 2011-04-29 Ingo Weinzierl <ingo@intevation.de> * doc/conf/themes.xml: Added mappings for the facets longitudinal.section.w and longitudinal.section.q. 2011-04-29 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added some methods to retrieve necessary information for computing the data of a waterlevel. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Added methods to compute and retrieve the data of a waterlevel computation. 2011-04-29 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WQKms.java: New. This model class represents a pool of data triples that consist of W, Q and Kms information. This class might be used to compute data for creating longitudinal section curves (which are based on those W, Q and Kms values). 2011-04-29 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: Bugfix: Removed endless loop and a bug while iterating over Hibernate results. 2011-04-28 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java: New. An OutGenerator that creates longitudinal section curves. NOTE: This is just the stub - the out creation needs to be implemented! * doc/conf/conf.xml: Added the LongitudinalSectionGenerator. 2011-04-28 Ingo Weinzierl <ingo@intevation.de> * doc/conf/conf.xml: Bugfix: Added missing <output-generators> section. 2011-04-28 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/WaterlevelState.java: New. This state should be reached if the 'calc.surface.curve' calculation method has been chosen. * doc/conf/artifacts/winfo.xml: Modified a transition and added the WaterlevelState. This state is reached if the 'calc.surface.curve' calculation method has been chosen. It currently has 1 output - a longitudinal section that is not implemented yet! 2011-04-28 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/transitions/ValueCompareTransition.java: New. This transition is valid if the a data object of the current artifact equals/notequals a configured value in the transition model. 2011-04-28 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java, src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Bugfixes: - Adapted the parameters of the isStateReachable() call - added the artifact and the current state. - Append the outputs of a current state if the state is filled with valid data. 2011-04-28 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/transitions/DefaultTransition.java: Added the missing init() method that has been introduced in the interface some commits ealier. * src/main/java/de/intevation/flys/artifacts/transitions/TransitionFactory.java: Call init() after a Transition has been created. 2011-04-28 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/AttributeWriter.java: Bugfix: Introduced a <art:outputs> node in the attribute document of a Collection that contains further <art:output> nodes - instead of having multiple <art:output> nodes at toplevel of the document. * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Adapted the XPath to retrieve the outputs in the attribute document of a Collection. 2011-04-28 Sascha L. Teichmann <sascha.teichmann@intevation.de> * contrib/visualize-transitions.xsl: Added to create a Graphviz digraph out of the config.xml. Usage: $ xsltproc --stringparam base-dir ../doc/conf/ \ contrib/visualize-transitions.xsl \ doc/conf/conf.xml > transitions.dot $ dot -Tsvg -o transitions.svg transitions.dot 2011-04-28 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java, src/main/java/de/intevation/flys/artifacts/states/WQSelect.java: If no data has been inserted so far, an IllegalArgumentException is thrown. 2011-04-28 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:: A lot of new methods to retrieve the theme of a facet - used while creating the output of a facet/artifact. If a facet has no theme yet, it is initialized. 2011-04-27 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/AttributeParser.java, src/main/java/de/intevation/flys/collections/OutputParser.java: Removed useless imports. 2011-04-27 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/ChartGenerator.java: New. An abstract OutGenerator that might be used to create chart output. Some basic things that are equal in all charts should be done here! * src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java: This OutGenerator no longer implements the OutGenerator directly, but it extends the ChartGenerator now. 2011-04-27 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Restructured the out() operation of a collection: Now, we collect a list of artifacts/facets and use this for the OutGenerator. Its doOut() method gets the attribute of an artifact - the position and the active state is managed by the Collection itself. 2011-04-26 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/ManagedFacet.java: New. a specialized facet that stores information about its position and its state (active/inactive) in an output of a collection. * src/main/java/de/intevation/flys/collections/AttributeParser.java: New. This parser takes the attributes (XML) of a collection and extracts the contained outputs with its facets. The result is a Map<String, Output>. * src/main/java/de/intevation/flys/collections/OutputParser.java: New. This parser is used to query the artifact's DESCRIBE and to extract the supported outputs. The result is a Map<String, Output>. * src/main/java/de/intevation/flys/collections/AttributeWriter.java: New. This writer merges the outputs contained in an attribute of a collection with the outputs of a collection's artifacts. * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: The attributes of a collection are written into its DESCRIBE document now. The OutputParser and AttributeParser are used to read the supported attributes by the collection and its artifacts - the AttributeWriter is used to merge both attributes and create a final attribute document. 2011-04-26 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/context/FLYSContext.java, src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java: The facet-2-theme mappings are initialized at startup and stored in the FLYSContext. * src/main/java/de/intevation/flys/themes/ThemeFactory.java: Added a function that retrieves a theme from FLYSContext based on its name. 2011-04-22 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: Corrected a silly c&p mistake. 2011-04-22 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/math/BackJumpCorrector.java: Implementation of the "Ruecksprungkorrektur" to be done in "W fuer angepassten Abflusslaengschnitt". All tests show the expected results. In some corner cases the algorithm described in the "Anwenderhandbuch" chapter 3.3.4.3 "Korrektur" has some definition shortcomings: a - What should happend when you cannot find point 2 because you cannot step back one quarter from point 3 because there is no data there any more (river too short in this direction)? The implemented algorithm raises point 3' only to an according factor. E.g. If you can step back the whole quarter distance the elevation is the full quarter. If you can step back only the half of the quarter the elevation is only an eighth. b - If the water heights between point 2 and 3 are constant then the algorithm will produce a spline interpolation that lowers those values. Is this intended? For real data the back jumps are expected to be more in the middle of the distance ranges so the corner cases are maybe not so important. * src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java: Removed superfluous import. 2011-04-21 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/themes/ThemeFactory.java: Removed debug code that has been commited by accident. 2011-04-21 Ingo Weinzierl <ingo@intevation.de> * doc/conf/themes.xml: New. A first small theme configuration. * doc/conf/conf.xml: Added a link to the theme configuration. * src/main/java/de/intevation/flys/artifacts/context/FLYSContext.java: Defined a key that is used to store a themes map in the FLYSContext. * src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java: The theme configuration is read at startup and the themes are stores in the FLYSContext. 2011-04-21 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/themes/Theme.java, src/main/java/de/intevation/flys/themes/DefaultTheme.java: New. The interface and its default implementation that represents themes used to style charts and maps. * src/main/java/de/intevation/flys/themes/ThemeField.java, src/main/java/de/intevation/flys/themes/DefaultThemeField.java: New. The interface and its default implementation that represents fields in themes. A theme might be "Lines" and one of its field might be "Color" or "Size". * src/main/java/de/intevation/flys/themes/ThemeFactory.java: A factory that creates new themes based on a theme configuration. 2011-04-20 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: Implementation of "Abflusskurve/Abflusstafel" calculation. Added method interpolateWQ() which takes an km and results in a tuple of two double arrays containing the w/q values interpolated between the surrounding w/q values of the table. w values are interpolated linear, q values with a cubic spline. Drawing w over q gives you the discharge table at the given km. !!! This code needs testing !!! 2011-04-20 Sascha L. Teichmann <sascha.teichmann@intevation.de> * pom.xml: Added dependency to Apache Commons Math 2.2 (Apache License 2.0) 2011-04-20 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java: Fix problem when sorting by q (copied w instead of q). 2011-04-20 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java: Fixed broken HQL statement. 2011-04-19 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: add a method interpolateW() which takes an array of q values and returns an equal sized array of w values. This is essentially the "Wasserstand/Wasserspiegellagen" calculation of desktop FLYS. If you want to do a calculation with given w values you have to convert the w values with DischargeTables.getQForW() first. !!! This code needs heavy testing !!! 2011-04-19 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java: We need a getQForW() method and not getWForQ() because when doing a "Wasserstand/Wasserspiegellagen" calculation with given w values these values need to be translated to q values with the master discharge table. 2011-04-19 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java: Sorting of q values was done wrong. 2011-04-19 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/AnnotationsFactory.java: Ordered the list of annotations returned by this factory based on its range. 2011-04-19 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/MainValuesService.java: New. This service returns an XML document that includes the main values of a gauge based on a river name, a start and an end point. * doc/conf/conf.xml: Registered the MainValuesService. 2011-04-19 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/MainValuesFactory.java: A factory that provides methods to return MainValues. 2011-04-19 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java: Added static method getWForQ() to interpolate a w value for a given q value based on a given discharge table. 2011-04-19 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java: Added convenience constructors/methods to ease the access to the master discharge table of a gauge. 2011-04-18 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: Moved the query complexity into view 'wst_value_table' and used this instead. 2011-04-18 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java: Fetches w/q value tables from the backend. TODO: Move this to the backend and use a view. 2011-04-18 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Changed the error key that is thrown if no input data was found so that the key is usable for GWT's i18n mechanism. 2011-04-18 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java: The inserted river is validated now (overrides validate() of DefaultState). 2011-04-18 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java: The inserted calculation method is validated now (overrides validate() of DefaultState). 2011-04-18 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: The input data of feed() are validated using the DefaultStates validate() method. * src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: New method validate() that needs to be overidden by concrete subclasses. It should return true, if the data of the State is fine, otherwise it should raise an exception. NOTE: The exceptions are not translated in the server but in the client! * src/main/java/de/intevation/flys/artifacts/states/RangeState.java: New. This abstract class exists to provide some methods for handling ranges. Currently, there is a method that validates a given range based on min/max values. * src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java, src/main/java/de/intevation/flys/artifacts/states/WQSelect.java: Implemented input data validation for ranges. NOTE: The input validation of concrete values has not been implemented yet! 2011-04-18 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Removed debug code that has been commited by accident :-/ 2011-04-18 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: The getGauge() method returns the first gauge based on the given start and end point of the river. * src/main/java/de/intevation/flys/artifacts/states/WQSelect.java: Fixed potential bugs: if no gauge could be determined, the default values for W and Q are the minimum and maximum double values. 2011-04-15 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/WQSelect.java: Fills the DESCRIBE with default values for W and Q. 2011-04-15 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/WstFactory.java: New. Returns Wst object - based on a river. 2011-04-15 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Now provides some methods that return some basic objects inserted while parameterization: River, Gauge and so on. 2011-04-15 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java, src/main/java/de/intevation/flys/artifacts/services/RiverService.java: Bugfix: Repaired broken imports of the SessionHolder. 2011-04-15 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/SessionHolder.java: Moved this class to flys-backend. * src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java, src/main/java/de/intevation/flys/artifacts/model/GaugesFactory.java, src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java, src/main/java/de/intevation/flys/artifacts/model/AnnotationsFactory.java, src/main/java/de/intevation/flys/artifacts/context/SessionCallContextListener.java: Adapted imports of the SessionHolder. 2011-04-14 Sascha L. Teichmann <sascha.teichmann@intevation.de> * trunk/src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java, trunk/src/main/java/de/intevation/flys/artifacts/services/RiverService.java: Acquire/release sessions in services to avoid db connection leaks. 2011-04-14 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: Changed some method signatures - added a reference to the owner Artifact. * src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java, src/main/java/de/intevation/flys/artifacts/states/WQSelect.java, src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java: Modified method signatures based on the changes in DefaultState. * src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java: Added default values to the dynamic part of DESCRIBE. 2011-04-14 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java: Added a function that returns a River object based on a given river name. 2011-04-14 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java, src/main/java/de/intevation/flys/artifacts/model/GaugesFactory.java, src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java, src/main/java/de/intevation/flys/artifacts/model/AnnotationsFactory.java: Static methods are using the SessionHolder, too. 2011-04-14 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/context/SessionCallContextListener.java: Added the setup() method that has been added to the interface description in the last commits. * doc/conf/conf.xml: Registered the SessionCallContextListener as CallContext.Listener. 2011-04-14 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/SessionHolder.java: Bugfix: Call correct method to retrieve an instance of SessionFactoryProvider. 2011-04-14 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/SessionHolder.java: New. Contains thread local session holder for hibernate sessions. * src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java: Uses session from SessionHolder. * src/main/java/de/intevation/flys/artifacts/context/SessionCallContextListener.java: Interacts with SessionHolder now. * src/main/java/de/intevation/flys/exports/ChartExportHelper.java: Removed superfluous import. 2011-04-14 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/context/SessionCallContextListener.java: Implementation of a CallContext.Listener to open/close Hibernate Sessions for each request. 2011-04-14 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java, src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: Some modifications related to the last commit - modification of the describe() signature of a State. 2011-04-14 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/GaugeSelect.java: Removed. We do not need a state to select a gauge - the selection takes place by choosing a start and an end point. 2011-04-13 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java: Bugfix: added missing label node to root node and a namespace to the data node. 2011-04-12 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: The name of the artifact 'winfo' is written into the DESCRIBE document now. We need this to have a proper way to distinguish between different artifacts in the UI. 2011-04-12 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Bugfix: States are filled with data before they describe themself. 2011-04-11 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/AnnotationsFactory.java: New. A factory that returns the annotations of a specific river. * src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java: New. This service provides a document that contains information about distances of a river. * doc/conf/conf.xml: Registered the DistanceInfoService. 2011-04-06 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: This collection overrides the out() operation now. The incoming request document is read and the related OutGenerator is used to create the output. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Removed the code to create discharge curves. It has moved to the DischargeCurveGenerator which now does this work. 2011-04-06 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/OutGenerator.java: The generate() method throws an IOException now. * src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java: New. This OutGenerator creates discharge curves. 2011-04-06 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Changed the visibility of the getData() method. It's now public, because the OutGenerator needs an artifact's data. 2011-04-03 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/**/*.java: Removed trailing whitespace. 2011-04-03 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Make project compilable again by commenting out a not existing XMLDebug reference. 2011-03-31 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java: Added code to parse the configured OutGenerators and to save them (in a map) in the FLYSContext. * src/main/java/de/intevation/flys/artifacts/context/FLYSContext.java: Added a key that is used to save the OutGenerators Map in the context. 2011-03-31 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/OutGenerator.java: New. This interface is used to generator different types of output. ArtifactCollections will make use of this interface to create a collected output of all its artifacts. 2011-03-30 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Removed the Backend from FLYSArtifactCollection - used ArtifactDatabase operations instead. * TODO: Removed 'remove Backend reference' TODO. 2011-03-30 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/winfo.xml: Enhanced the configuration of the discharge curve output mode. This output now provides three facets - W, Q and the curve itself. 2011-03-30 Ingo Weinzierl <ingo@intevation.de> Tagged RELEASE 0.1 2011-03-30 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/winfo.xml: Renamed an output mode in the WINFO artifact configuration. 2011-03-29 Ingo Weinzierl <ingo@intevation.de> * src/main/resources/messages_de_DE.properties, src/main/resources/messages_de.properties: Changed a german string. 2011-03-29 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java: Modified the available calculation modes and its order in the DESCRIBE document. * src/main/resources/messages.properties, src/main/resources/messages_de_DE.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: Adapted the names of calculation modes. 2011-03-28 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Added the hash code of an artifact to the artifact part of the collection's DESCRIBE document. 2011-03-28 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Changed the background color of discharge curves to white. 2011-03-28 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java: Cache the scale, too. Otherwise two calls to getValues() with different arguments will result in the same output. 2011-03-28 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java: Introduced a 'scale' parameter in the getValues() method. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Filled the out() operation with code that draws a discharge table of one or more gauges specified by the given range in entered in a previous state. 2011-03-28 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/exports/ChartExportHelper.java: New. A helper class to exports charts. * pom.xml: Added dependencies to iText, Batik and JFreeChart. 2011-03-28 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/importer/PegelGltParser.java: Fixed swap of operands. 2011-03-28 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/GaugesFactory.java: New. Load gauges for a river and filter them for given ranges. 2011-03-25 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java: Store data in a double [][] instead of interleaved double [] to be compatible with org.jfree.data.xy.DefaultXYDataset. 2011-03-25 Ingo Weinzierl <ingo@intevation.de> * TODO: Removed 'i18n' and 'step-back' TODOs and added an issue to remove the Backend reference from FLYSArtifactCollection. 2011-03-25 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: Added missing artifact namespace of an attribute in the DESCRIBE document. 2011-03-24 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java: New. This ArtifactCollection overrides the DefaultArtifactCollection to implement FLYS specific describe() and out() operations. * doc/conf/conf.xml: Use the FLYSArtifactCollection instead of the DefaultArtifactCollection for this application. 2011-03-24 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java: New. Fetches values of discharge tables in form of packed w/q double arrays for given gauges. * src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java: Removed needless import. 2011-03-24 Ingo Weinzierl <ingo@intevation.de> * src/main/resources/messages_de_DE.properties: Added a german resource bundle to avoid exceptions in the flys artifacts. Sometimes, the Resources class is not able to find a 'de_DE' bundle and throws an exception. This is really strange, because it should use the 'de' bundle in that case, but it doesn't. 2011-03-23 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Added some code to append the output modes of previous states to the DESCRIBE document. TODO: Determine if the current state is already filled with data and append its output modes as well! 2011-03-22 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/winfo.xml: Enhanced the location_distance state with an output mode 'discharge_table'. 2011-03-21 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: Write human readable strings as label attribute into the DESCRIBE output. Those labels are used to be displayed in the GUI. 2011-03-21 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java: Added some further calculation types. * src/main/resources/messages.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: Added i18n strings for the calculation types 2011-03-21 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Implemented the step-back part of the advance() operation. 2011-03-21 Ingo Weinzierl <ingo@intevation.de> * src/main/resources/messages_de.properties: Fixed a german umlaut. 2011-03-18 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/winfo.xml: Added new states for entering a location/distance and w/q. * src/main/resources/messages.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: New string for the location/distance and w/q input states. 2011-03-18 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/WQSelect.java: New. A state for the W/Q input of the WINFO parameterization. 2011-03-18 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: Append an attribute 'uiprovider' to the dynamic UI node. * src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java: New. A state for the location/distance selection of the WINFO parameterization. 2011-03-17 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: Added a new method getUIProvider() that might be overriden by concreted subclasses that should be rendered with a specific UIProvider. 2011-03-17 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: The static UI part is created by the previous states now. This makes it possible to group the data objects (which is necessary to group the objects in the ui). * src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: Added a describeStatic() method that creates a node that contains the data of that state. 2011-03-17 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/RiverService.java: Removed TODO: the document contains the rivers provided by the backend now. 2011-03-17 Sascha L. Teichmann <sascha.teichmann@intevation.de> * pom.xml: Added dependency to flys backend. * src/main/java/de/intevation/flys/artifacts/model/River.java: Removed. We are using the backend model now. * src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java: Fetches the rivers from the backend. * src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java: Import fixes. 2011-03-15 Sascha L. Teichmann <sascha.teichmann@intevation.de> * doc/conf/conf.xml: Added section for database backend configuration. 2011-03-15 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java: Fixed build error coming from different import of XMLUtils. 2011-03-14 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: Appended the missing label node that contains the human readable name of the data item. 2011-03-14 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java, src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: I18N of strings for the DESCRIBE document. * src/main/resources/messages.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: I18N strings for the calculcation mode state. 2011-03-14 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/winfo.xml: Modified the winfo states. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Adapted the artifact regarding the changes of the last commit. The states describe() method creates the dynamic UI node - the artifact needs to apply this node. * src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java: New. The state for choosing the calculation mode. * src/main/resources/messages.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: Added i18n strings for the calculation mode state. 2011-03-14 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: New. This is the base state for the FLYS application. It provides a method that creates the dynamic ui node for the DESCRIBE. * src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java, src/main/java/de/intevation/flys/artifacts/states/GaugeSelect.java: Both classes extend the abstract base class DefaultState. 2011-03-14 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/resources/Resources.java: New. This class retrieves the i18n strings from a ResourceBundle. * src/main/resources/messages.properties, src/main/resources/messages_en.properties, src/main/resources/messages_de.properties: Resource files for german and english translation. 2011-03-10 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Appended the data that have been inserted in former states into the static node of the DESCRIBE. 2011-03-10 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: The operations feed() and advance() return the description of the artifact using the describe() operation. This avoids additional server round trips in the client - the clients gets to know about the new state of the artifact immediately. 2011-03-10 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Implemented a part (step forward) of the advance operation. * TODO: Implement Step-Back in advance operation. 2011-03-09 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Implemented the abstract method getName(). It returns the constant 'winfo' string. * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Implemented the feed action. The data of an incoming feed() operation is stored in StateData objects that are saved in a map in the artifact. NOTE: There is no input validation and no i18n of error messages (see TODO). 2011-03-09 Ingo Weinzierl <ingo@intevation.de> * TODO: This file contains some open points that need to be done. 2011-03-09 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: New. This artifact serves as the default artifact for the FLYS application. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: This artifact now inherits from FLYSArtifact. Furthermore, there is one big change: we don't store the State objects itself in the artifact, but just the identifier of those. This makes the artifact smaller and more compatible agains previous versions of the software. 2011-03-08 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/services/RiverService.java: New. This service will retrieve a list of provided rivers. * doc/conf/conf.xml: Added a configuration for the RiverService. 2011-03-07 Ingo Weinzierl <ingo@intevation.de> * doc/conf/conf.xml: Added a section user-factory and collection-factory in the factories part of the configuration. 2011-03-01 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java: Replaced the 'special' attribute from DESCRIBE with a 'uiprovider' attribute. 2011-02-08 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: The RiverSelect state is called to create the UI part of the describe document. * src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java: Implemented the dynamic UI part of describe(). The static part is not inserted into the describe document at the moment. We need a reference to the previous states for this. 2011-02-08 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java, src/main/java/de/intevation/flys/artifacts/model/River.java: New. A model class that represents a river and its factory to create concrete river instances. NOTE: Currently, this is just a mockup. The factory just returns two static rivers "Mosel" and "Saar" without a connection to a backend. 2011-02-07 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/StateFactory.java: The input data of a state is initialized with empty StateData objects after the State has been created. * doc/conf/artifacts/winfo.xml: Renamed the input data nodes of the states which now fits better to the class name of the implementation. 2011-02-07 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: The describe document returned by this artifact now contains the current state and the reachable states. 2011-02-07 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java: The transitions are put into the TransitionEngine with the ID of the state - not longer with the artifact name. On this way, we are able to fetch just the transitions for a specific state, instead of all the transitions of an artifact. 2011-02-04 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Describe() returns the artifact's uuid and hash value. The whole implementation of describe() is still outstanding. 2011-02-04 Ingo Weinzierl <ingo@intevation.de> * doc/conf/artifacts/winfo.xml: Removed useless config stuff. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Removed useless methods, and improved the init process - the first state is set as the current state for this artifact. * src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java, src/main/java/de/intevation/flys/artifacts/states/GaugeSelect.java: New. The states are used in the first two steps of the WINFOArtifact. Currently, they just implement stubs of the necessary methods setup() and describe(). 2011-02-04 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/State.java, src/main/java/de/intevation/flys/artifacts/transitions/TransitionEngine.java, src/main/java/de/intevation/flys/artifacts/transitions/Transition.java: Removed. These classes are placed in the artifact-database now. * src/main/java/de/intevation/flys/artifacts/transitions/DefaultTransition.java, src/main/java/de/intevation/flys/artifacts/transitions/TransitionFactory.java: Adapted imports of Transition. * src/main/java/de/intevation/flys/artifacts/states/StateFactory.java: New. This factory should be used to create concrete State objects. * src/main/java/de/intevation/flys/artifacts/context/FLYSContext.java: Added a constant key to store the StateEngine in the context. * src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java: New method that initializes the states at application start. 2011-02-03 Ingo Weinzierl <ingo@intevation.de> * src/main/java/de/intevation/flys/artifacts/states/State.java: New. The interface description of a state. * src/main/java/de/intevation/flys/artifacts/transitions/Transition.java, src/main/java/de/intevation/flys/artifacts/transitions/DefaultTransition.java: New. The interface description and a default implementation of a transition. * src/main/java/de/intevation/flys/artifacts/transitions/TransitionEngine.java: New. The TransitionEngine stores all transitions for each artifact and should be used to determine, if an artifact can advance from one state to another. * src/main/java/de/intevation/flys/artifacts/transitions/TransitionFactory.java: New. Transitions should be created by using this class. * src/main/java/de/intevation/flys/artifacts/context/FLYSContext.java: New. The Flys context. It currently defines keys to store important components in the context. * src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java: New. The context factory initializes the basic components of the application. Currently, the TransitionEngine is created and all artifacts with its transitions are read from the global configuration and stored in the FLYSContext. * pom.xml: Added a dependency to the 'artifacts-common' package. * doc/conf/artifacts/winfo.xml: Corrected the classname of the DefaultTransition. * doc/conf/conf.xml: Added FLYSContextFactory as context-factory. 2011-02-02 Ingo Weinzierl <ingo@intevation.de> * doc/conf/conf.xml: An initial configuration file for the FLYS artifact server. * doc/conf/artifacts/winfo.xml: An initial transition configuration of an WINFO artifact. * src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: A stub of an artifact for a WINFO parameterization. * pom.xml: Set the source code version to 1.5. 2011-02-01 Sascha L. Teichmann <sascha.teichmann@intevation.de> * src/**, pom.xml: Added initial maven project. * ChangeLog: new.