Mercurial > dive4elements > river
view artifacts/doc/conf/meta-data.xml @ 7928:5b3c795385ef
This guess was not always correct.
| author | "Tom Gottfried <tom@intevation.de>" |
|---|---|
| date | Thu, 12 Jun 2014 12:26:05 +0200 |
| parents | 21d320ebb50c |
| children | a4764ab23eef |
line wrap: on
line source
<?xml version="1.0" encoding="UTF-8"?> <dc:template xmlns:dc="http://www.intevation.org/2011/Datacage"> <datacage> <dc:comment> User specific part ------------------ This is a hack because we currently have no way to supress empty folders (either in the client or in the datacage). </dc:comment> <dc:if test="dc:contains($parameters, 'user-id') and not(dc:contains($artifact-outs, 'floodmap-hws')) and not($current-state-id = 'state.winfo.uesk.dgm')"> <dc:call-macro name="load-user"/> </dc:if> <dc:call-macro name="load-system"/> <dc:macro name="load-system"> <dc:context connection="system"> <dc:statement> SELECT id AS river_id, name AS river_name FROM rivers WHERE lower(name) LIKE lower(${river}) </dc:statement> <dc:for-each> <dc:call-macro name="generate-system-content"/> </dc:for-each> </dc:context> </dc:macro> <dc:macro name="load-user"> <old_calculations> <dc:call-macro name="generate-user-content"/> </old_calculations> </dc:macro> <dc:macro name="generate-system-content"> <dc:message>Generate system content with variables: {dc:dump-variables()}</dc:message> <dc:call-macro name="artifact-range"> <dc:call-macro name="km-filtered-wsts"> <dc:choose> <dc:when test="dc:contains($parameters, 'recommended')"> <dc:comment> Recommendations (client shall load immediately). </dc:comment> <dc:iterate var="out" container="artifact-outs"> <dc:message>Rec out iteration for: {$out}</dc:message> <dc:choose> <dc:when test="$out = 'w_differences'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'discharge_longitudinal_section'"> <dc:call-macro name="annotations"/> <dc:call-macro name="officiallines_user"/> </dc:when> <dc:when test="$out = 'historical_discharge_wq'"> <dc:call-macro name="mainvalues"/> </dc:when> <dc:when test="$out = 'cross_section'"> <dc:call-macro name="cross_sections"/> <dc:call-macro name="hyks"/> <dc:call-macro name="officiallines_user"/> </dc:when> <dc:when test="$out = 'discharge_curve'"> <dc:call-macro name="mainvalues"/> <dc:call-macro name="basedata_3_officials_wq"/> </dc:when> <dc:when test="$out = 'computed_discharge_curve'"> <dc:call-macro name="mainvalues"/> <dc:call-macro name="basedata_3_officials_wq"/> <dc:call-macro name="basedata_2_fixations_wqkms"/> </dc:when> <dc:when test="$out = 'duration_curve'"> <dc:call-macro name="mainvalues"/> </dc:when> <dc:when test="$out = 'reference_curve'"> <dc:call-macro name="mainvalues"/> </dc:when> <dc:when test="$out = 'fix_wq_curve'"> <dc:call-macro name="mainvalues"/> <dc:call-macro name="qsectors"/> </dc:when> <dc:when test="$out = 'longitudinal_section'"> <dc:call-macro name="annotations"/> <dc:call-macro name="officiallines_user"/> </dc:when> <dc:when test="$out = 'fix_longitudinal_section_curve'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'bedheight_middle'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'bed_difference_year'"> <dc:call-macro name="annotations"/> <dc:call-macro name="basedata_6_delta_w"/> </dc:when> <dc:when test="$out = 'bed_difference_height_year'"> <dc:call-macro name="annotations"/> <dc:call-macro name="basedata_6_delta_w"/> </dc:when> <dc:when test="$out = 'floodmap'"> <dc:call-macro name="flood-map-recommended"/> </dc:when> <dc:when test="$out = 'floodmap-hws'"> <dc:call-macro name="flood-map-recommended"/> </dc:when> <dc:when test="$out = 'minfo-heights'"> <dc:call-macro name="minfo-heights"/> </dc:when> <dc:when test="$out = 'minfo-heights-epoch'"> <bedheights> <dc:call-macro name="bed-heights-epoch"/> </bedheights> </dc:when> <dc:when test="$out = 'sedimentload_ls'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'bed_longitudinal_section'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'flow_velocity'"> <dc:call-macro name="annotations"/> </dc:when> </dc:choose> </dc:iterate> </dc:when> <dc:otherwise> <dc:comment> Non - Recommendations (offered to user to choose additional data from). </dc:comment> <dc:iterate var="out" container="artifact-outs"> <dc:message>Non Rec out iteration for: {$out}</dc:message> <dc:choose> <dc:when test="$out = 'cross_section'"> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_2_fixations"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="basedata_4_heightmarks-points"/> <dc:call-macro name="cross_sections"/> <dc:call-macro name="basedata_5_flood-protections"/> <dc:call-macro name="hyks"/> </dc:when> <dc:when test="$out = 'longitudinal_section'"> <dc:call-macro name="longitudinal-section-prototype"/> </dc:when> <dc:when test="$out = 'w_differences'"> <dc:call-macro name="longitudinal-section-prototype"/> </dc:when> <dc:when test="$out = 'discharge_longitudinal_section'"> <dc:call-macro name="longitudinal-section-prototype"/> </dc:when> <dc:when test="$out = 'historical_discharge_wq'"> <dc:call-macro name="discharge-curve-prototype"/> <dc:call-macro name="basedata_5_flood-protections"/> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_4_heightmarks-points"/> <computed_discharge_curve> <dc:call-macro name="mainvalues"/> </computed_discharge_curve> </dc:when> <dc:when test="$out = 'discharge_curve'"> <dc:call-macro name="discharge-curve-prototype"/> <dc:call-macro name="basedata_1_additionals_wq"/> <dc:call-macro name="basedata_5_flood-protections"/> <computed_discharge_curve> <dc:call-macro name="mainvalues"/> </computed_discharge_curve> </dc:when> <dc:when test="$out = 'duration_curve'"> <dc:call-macro name="mainvalues"/> <dc:call-macro name="basedata_2_fixations_relative_point"/> <dc:call-macro name="basedata_4_heightmarks-points-relative_points"/> <dc:call-macro name="basedata_5_flood-protections_relative_points"/> </dc:when> <dc:when test="$out = 'reference_curve'"> <dc:call-macro name="mainvalues"/> <dc:call-macro name="annotations"/> <dc:call-macro name="basedata_1_additionals-relative_point"/> <dc:call-macro name="basedata_2_fixations_relative_point"/> <dc:call-macro name="basedata_4_heightmarks-points-relative_points"/> <dc:call-macro name="basedata_5_flood-protections_relative_points"/> </dc:when> <dc:when test="$out = 'fix_wq_curve'"> <dc:call-macro name="discharge-curve-prototype"/> <dc:call-macro name="basedata_1_additionals_marks"/> <dc:call-macro name="basedata_2_fixations_wqkms"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="basedata_5_flood-protections_relative_points"/> </dc:when> <dc:when test="$out = 'fix_longitudinal_section_curve'"> <dc:call-macro name="longitudinal-section-prototype"/> </dc:when> <dc:when test="$out = 'map'"> <dc:call-macro name="flood-map-complete"/> </dc:when> <dc:when test="$out = 'flow_velocity'"> <dc:call-macro name="longitudinal-section-prototype"/> </dc:when> <dc:when test="$out = 'bed_longitudinal_section'"> <dc:call-macro name="longitudinal-section-prototype"/> </dc:when> <dc:when test="$out = 'sedimentload_ls'"> <dc:call-macro name="longitudinal-section-prototype"/> </dc:when> <dc:when test="$out = 'bedheight_middle'"> <dc:call-macro name="longitudinal-section-prototype"/> </dc:when> <dc:when test="$out = 'bed_difference_height_year'"> <dc:call-macro name="longitudinal-section-prototype"/> </dc:when> <dc:when test="$out = 'bed_difference_year'"> <dc:call-macro name="longitudinal-section-prototype"/> </dc:when> <dc:when test="$out = 'floodmap'"> <dc:choose> <dc:when test="dc:contains($parameters, 'dem')"> <dc:call-macro name="flood-map-dem"/> </dc:when> <dc:when test="dc:contains($parameters, 'hws')"> <hws> <dc:call-macro name="flood-map-hws-lines"/> <dc:call-macro name="flood-map-hws-points"/> </hws> </dc:when> <dc:otherwise> <dc:call-macro name="flood-map-complete"/> </dc:otherwise> </dc:choose> </dc:when> <dc:when test="$out = 'floodmap-hws'"> <dc:choose> <dc:when test="dc:contains($parameters, 'dem')"> <dc:call-macro name="flood-map-dem"/> </dc:when> <dc:when test="dc:contains($parameters, 'hws')"> <hws> <dc:call-macro name="flood-map-hws-lines"/> <dc:call-macro name="flood-map-hws-points"/> </hws> </dc:when> <dc:otherwise> <dc:call-macro name="flood-map-complete"/> </dc:otherwise> </dc:choose> </dc:when> <dc:when test="$out = 'computed_discharge_curve'"> <dc:call-macro name="discharge-curve-prototype"/> <dc:call-macro name="basedata_0_wq"/> <dc:call-macro name="basedata_1_additionals_wq"/> <dc:call-macro name="basedata_5_flood-protections"/> <computed_discharge_curve> <dc:call-macro name="mainvalues"/> </computed_discharge_curve> </dc:when> <dc:when test="$out = 'minfo-heights'"> <dc:call-macro name="minfo-heights"/> </dc:when> <dc:when test="$out = 'minfo-heights-epoch'"> <bedheights> <dc:call-macro name="bed-heights-epoch"/> </bedheights> </dc:when> <dc:when test="$out = 'differenceable'"> <dc:if test="$current-state-id != 'state.winfo.uesk.wsp'"> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_2_fixations"/> <dc:call-macro name="basedata_4_heightmarks-points"/> <dc:call-macro name="basedata_5_flood-protections"/> </dc:if> </dc:when> <dc:when test="$out = 'waterlevels'"> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_2_fixations"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="basedata_4_heightmarks-points"/> <dc:call-macro name="basedata_5_flood-protections"/> </dc:when> <dc:when test="starts-with($out, 'sq_relation')"> <dc:call-macro name="sqrelations"/> </dc:when> </dc:choose> </dc:iterate> </dc:otherwise> </dc:choose> </dc:call-macro> </dc:call-macro> </dc:macro> <dc:macro name="generate-user-content"> <dc:message>Generate user content with variables: {dc:dump-variables()}</dc:message> <dc:call-macro name="artifact-range"> <dc:call-macro name="all-user-artifacts"> <dc:call-macro name="km-filtered-user-artifacts"> <dc:choose> <dc:when test="dc:contains($parameters, 'recommended')"> <dc:comment> Recommendations (user) </dc:comment> <dc:iterate var="out" container="artifact-outs"> <dc:choose> <dc:when test="$out = 'longitudinal_section'"> <dc:call-macro name="officiallines_user"/> </dc:when> </dc:choose> </dc:iterate> </dc:when> <dc:otherwise> <dc:comment> Non Recommendations (user) - offer to load other projects </dc:comment> <dc:iterate var="out" container="artifact-outs"> <dc:choose> <dc:when test="$out = 'longitudinal_section'"> <dc:call-macro name="longitudinal-section-user-prototype"/> </dc:when> <dc:when test="$out = 'discharge_longitudinal_section'"> <dc:call-macro name="longitudinal-section-user-prototype"/> </dc:when> <dc:when test="$out = 'w_differences'"> <dc:call-macro name="longitudinal-section-user-prototype"/> </dc:when> <dc:when test="$out = 'computed_discharge_curve'"> <dc:call-macro name="computed-discharge-curve"/> <dc:call-macro name="fix-wq-curve"/> <dc:call-macro name="discharge-curve"/> <dc:call-macro name="extreme-wq-curve"/> </dc:when> <dc:when test="$out = 'fix_deltawt_curve'"> <dc:call-macro name="delta-wt"/> </dc:when> <dc:when test="$out = 'reference_curve'"> <dc:call-macro name="reference-curves"/> </dc:when> <dc:when test="$out = 'cross_section'"> <dc:call-macro name="waterlevels"/> </dc:when> <dc:when test="$out = 'fix_longitudinal_section_curve'"> <dc:call-macro name="longitudinal-section-user-prototype"/> </dc:when> <dc:when test="$out = 'fix_derivate_curve'"> <dc:call-macro name="fix-derivate-curve"/> </dc:when> <dc:when test="$out = 'fix_wq_curve'"> <dc:call-macro name="fix-wq-curve"/> <dc:call-macro name="waterlevels-fix"/> </dc:when> <dc:when test="$out = 'duration_curve'"> <dc:call-macro name="duration-curve"/> </dc:when> <dc:when test="$out = 'differenceable'"> <dc:call-macro name="differenceable-fix"/> <dc:call-macro name="differences"/> <dc:comment comment="Candidate for:"> <dc:call-macro name="longitudinal-section-user-prototype"/> </dc:comment> </dc:when> <dc:when test="$out = 'waterlevels'"> <dc:call-macro name="waterlevels-fix"/> <dc:comment comment="Candidate for:"> <dc:call-macro name="longitudinal-section-user-prototype"/> </dc:comment> </dc:when> <dc:when test="$out = 'floodmap'"> <dc:call-macro name="flood-map"/> </dc:when> <dc:when test="$out = 'map'"> <dc:call-macro name="flood-map"/> </dc:when> <dc:when test="$out = 'bedheight_middle'"> <dc:call-macro name="longitudinal-section-user-prototype"/> </dc:when> <dc:when test="$out = 'floodmap-hws'"> <dc:call-macro name="floodmap-hws-user"/> </dc:when> <dc:when test="$out = 'flow_velocity'"> <dc:call-macro name="longitudinal-section-user-prototype"/> </dc:when> <dc:when test="$out = 'bed_longitudinal_section'"> <dc:call-macro name="longitudinal-section-user-prototype"/> </dc:when> <dc:when test="$out = 'sedimentload_ls'"> <dc:call-macro name="longitudinal-section-user-prototype"/> </dc:when> <dc:when test="$out = 'bed_difference_year'"> <dc:call-macro name="longitudinal-section-user-prototype"/> </dc:when> <dc:when test="$out = 'bed_difference_height_year'"> <dc:call-macro name="longitudinal-section-user-prototype"/> </dc:when> <dc:when test="$out = 'historical_discharge'"> <dc:call-macro name="historical-discharge-user"/> </dc:when> <dc:when test="$out = 'historical_discharge_wq'"> <dc:call-macro name="historical-discharge-wq-user"/> </dc:when> <dc:when test="starts-with($out, 'sq_relation')"> <dc:call-macro name="sqrelations_user"/> </dc:when> </dc:choose> </dc:iterate> </dc:otherwise> </dc:choose> </dc:call-macro> </dc:call-macro> </dc:call-macro> </dc:macro> <!-- Macros to load user data --> <dc:macro name="historical-discharge-user"> <dc:filter expr="$out = 'historical_discharge' and starts-with($facet_name, 'historical_discharge.historical')"> <dc:if test="dc:has-result()"> <historical_discharges> <dc:call-macro name="collection-group"> <discharges description="{dc:group-key()}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="out" value="historical_discharge"/> </dc:element> </dc:for-each> </discharges> </dc:call-macro> </historical_discharges> </dc:if> </dc:filter> </dc:macro> <dc:macro name="historical-discharge-wq-user"> <dc:filter expr="$out = 'historical_discharge_wq' and starts-with($facet_name, 'historical_discharge.wq')"> <dc:if test="dc:has-result()"> <historical_discharges> <dc:call-macro name="collection-group"> <discharges description="{dc:group-key()}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="out" value="historical_discharge"/> </dc:element> </dc:for-each> </discharges> </dc:call-macro> </historical_discharges> </dc:if> </dc:filter> </dc:macro> <dc:macro name="differences"> <dc:filter expr="$facet_name = 'w_differences' or $facet_name = 'w_differences.filtered'"> <dc:if test="dc:has-result()"> <differences> <dc:call-macro name="collection-group"> <differences description="{dc:group-key()}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="out" value="${out_name}"/> </dc:element> </dc:for-each> </differences> </dc:call-macro> </differences> </dc:if> </dc:filter> </dc:macro> <dc:macro name="reference-curves"> <dc:filter expr="$out = 'reference_curve' and $facet_name = 'reference_curve'"> <dc:if test="dc:has-result()"> <reference_curves> <dc:call-macro name="collection-group"> <ref_curve description="{dc:group-key()}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="out" value="reference_curve"/> </dc:element> </dc:for-each> </ref_curve> </dc:call-macro> </reference_curves> </dc:if> </dc:filter> </dc:macro> <dc:macro name="historical_discharge_curve"> <dc:variable name="refgauge" type="number" expr="$reference_gauge"/> <dc:context> <dc:statement> SELECT g.id AS gauge_id, g.name AS gauge_name, dt.id AS dt_id, t.start_time AS start_time, t.stop_time AS stop_time, dt.bfg_id AS bfg_id FROM gauges g JOIN discharge_tables dt ON g.id = dt.gauge_id LEFT JOIN time_intervals t ON dt.time_interval_id = t.id WHERE g.river_id = ${river_id} AND dt.kind <> 0 AND ((g.station = ${fromkm} AND g.station = ${tokm}) OR g.official_number = ${refgauge}) ORDER BY start_time </dc:statement> <dc:if test="dc:has-result()"> <historical_discharge_curves> <dc:group expr="$gauge_name"> <dc:for-each> <dc:variable name="combined_desc" expr="concat($bfg_id, ' ', dc:date-format('dd.MM.yyyy', $start_time), ' - ', dc:date-format('dd.MM.yyyy', $stop_time))"/> <histdis name="{$combined_desc}" description="{$combined_desc}" factory="gaugedischarge" target_out="{$out}" ids="{$gauge_name};{$dt_id};{$combined_desc}"/> </dc:for-each> </dc:group> </historical_discharge_curves> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map"> <dc:filter expr="$facet_name = 'floodmap.wsplgen'"> <dc:if test="dc:has-result()"> <floodmap> <dc:for-each> <dc:variable name="combined_desc" expr="concat($facet_description, ' ', dc:date-format('dd.MM.yyyy - H:mm:ss', $a_creation), ' ', $collection_name)"/> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${combined_desc}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="artifact-id" value="${a_id}"/> <dc:attribute name="ids" value="${a_id}"/> <dc:attribute name="out" value="floodmap"/> </dc:element> </dc:for-each> </floodmap> </dc:if> </dc:filter> </dc:macro> <dc:macro name="waterlevels"> <dc:filter expr="$out_name = 'cross_section'"> <dc:if test="dc:has-result()"> <waterlevels> <dc:group expr="concat($river, ' ', dc:date-format('dd.MM.yyyy - H:mm:ss', $a_creation))"> <dc:comment>Aheinecke: Why is this grouping different from the rest?</dc:comment> <longitudinal_section_columns description="{dc:group-key()}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="cross_section"/> </dc:element> </dc:for-each> </longitudinal_section_columns> </dc:group> </waterlevels> </dc:if> </dc:filter> </dc:macro> <dc:macro name="collection-group"> <dc:group expr="concat($river, ' ', dc:date-format('dd.MM.yyyy - H:mm:ss', $a_creation), ' ', $collection_name)"> <dc:macro-body/> </dc:group> </dc:macro> <dc:macro name="longitudinal"> <dc:filter expr="$out_name = 'longitudinal_section' and $a_state != 'state.fix.vollmer.compute'"> <dc:if test="dc:has-result()"> <waterlevels_ls> <dc:call-macro name="collection-group"> <dc:comment>Aheinecke: Why is this grouping different from the rest?</dc:comment> <longitudinal_section_columns description="{dc:group-key()}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="longitudinal_section"/> </dc:element> </dc:for-each> </longitudinal_section_columns> </dc:call-macro> </waterlevels_ls> </dc:if> </dc:filter> </dc:macro> <dc:macro name="longitudinal-section-fix-vollmer"> <dc:filter expr="$a_state = 'state.fix.vollmer.compute' and ($facet_name = 'longitudinal_section.w' or $facet_name = 'longitudinal_section.q') "> <dc:if test="dc:has-result()"> <waterlevels_fix_vollmer> <dc:call-macro name="collection-group"> <waterlevels description="{dc:group-key()}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="fixanalysis"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="longitudinal_section"/> </dc:element> </dc:for-each> </waterlevels> </dc:call-macro> </waterlevels_fix_vollmer> </dc:if> </dc:filter> </dc:macro> <dc:macro name="longitudinal-section-fix"> <dc:filter expr="$out_name = 'fix_longitudinal_section_curve' and (starts-with($facet_name, 'fix_deviation_ls') or starts-with($facet_name, 'fix_sector_average_ls') or starts-with($facet_name, 'fix_analysis_events_ls') or starts-with($facet_name, 'fix_reference_events_ls')) "> <dc:if test="dc:has-result()"> <waterlevels_fix> <dc:call-macro name="collection-group"> <waterlevels description="{dc:group-key()}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="fixanalysis"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="fix_longitudinal_section_curve"/> </dc:element> </dc:for-each> </waterlevels> </dc:call-macro> </waterlevels_fix> </dc:if> </dc:filter> </dc:macro> <dc:macro name="delta-wt"> <dc:filter expr="$out_name = 'fix_deltawt_curve' and ($facet_name = 'fix_analysis_events_dwt' or $facet_name = 'fix_analysis_periods_dwt' or $facet_name = 'fix_reference_events_dwt' or starts-with($facet_name, 'fix_deviation_dwt') or starts-with($facet_name, 'fix_sector_average_dwt'))"> <dc:if test="dc:has-result()"> <waterlevels> <dc:call-macro name="collection-group"> <waterlevels description="{dc:group-key()}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="fixanalysis"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="fix_deltawt_curve"/> </dc:element> </dc:for-each> </waterlevels> </dc:call-macro> </waterlevels> </dc:if> </dc:filter> </dc:macro> <dc:macro name="fix-derivate-curve"> <dc:filter expr="$out_name = 'fix_derivate_curve' and $facet_name = 'fix_derivate_curve'"> <dc:if test="dc:has-result()"> <waterlevels> <dc:call-macro name="collection-group"> <waterlevels description="{dc:group-key()}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="fixanalysis"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="fix_derivate_curve"/> </dc:element> </dc:for-each> </waterlevels> </dc:call-macro> </waterlevels> </dc:if> </dc:filter> </dc:macro> <dc:macro name="fix-wq-curve"> <dc:filter expr="$out_name = 'fix_wq_curve' and (starts-with($facet_name, 'fix_analysis_events_wq') or starts-with($facet_name, 'fix_reference_events_wq') or starts-with($facet_name, 'fix_sector_average_wq') or $facet_name = 'fix_wq_curve')"> <dc:if test="dc:has-result()"> <waterlevels> <dc:call-macro name="collection-group"> <waterlevels description="{dc:group-key()}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="fixanalysis"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="fix_wq_curve"/> </dc:element> </dc:for-each> </waterlevels> </dc:call-macro> </waterlevels> </dc:if> </dc:filter> </dc:macro> <dc:macro name="discharge-curve"> <dc:filter expr="$facet_name = 'discharge_curve.curve'"> <dc:if test="dc:has-result()"> <discharge_curves> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="ids" value="${a_gid}"/> <dc:attribute name="out" value="discharge_curve"/> </dc:element> </dc:for-each> </discharge_curves> </dc:if> </dc:filter> </dc:macro> <dc:macro name="extreme-wq-curve"> <dc:filter expr="$facet_name = 'extreme_wq_curve' or $facet_name = 'extreme_wq_curve_base'"> <dc:if test="dc:has-result()"> <computed_discharge_curves> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="factory" value="fixanalysis"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="ids" value="${a_gid}"/> <dc:attribute name="out" value="computed_discharge_curve"/> </dc:element> </dc:for-each> </computed_discharge_curves> </dc:if> </dc:filter> </dc:macro> <dc:macro name="computed-discharge-curve"> <dc:filter expr="$facet_name = 'computed_discharge_curve.q'"> <dc:if test="dc:has-result()"> <computed_discharge_curves> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="ids" value="${a_gid}"/> <dc:attribute name="out" value="computed_discharge_curve"/> </dc:element> </dc:for-each> </computed_discharge_curves> </dc:if> </dc:filter> </dc:macro> <dc:macro name="duration-curve"> <dc:filter expr="$facet_name = 'duration_curve.q' or $facet_name = 'duration_curve.w'"> <dc:if test="dc:has-result()"> <computed_discharge_curves> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="artifact-id" value="${a_id}"/> <dc:attribute name="ids" value="${a_id}"/> <dc:attribute name="out" value="duration_curve"/> </dc:element> </dc:for-each> </computed_discharge_curves> </dc:if> </dc:filter> </dc:macro> <dc:comment>TODO doesnt work nicely for fix/wq-diags. Aheinecke (27.5.2013): Why?</dc:comment> <dc:macro name="waterlevels-fix"> <dc:filter expr="($out_name = 'longitudinal_section' and $facet_name = 'longitudinal_section.w') and (not ($current-state-id = 'state.winfo.uesk.wsp' and $ld_m = 'location'))"> <dc:if test="dc:has-result()"> <waterlevels> <dc:call-macro name="collection-group"> <waterlevels description="{dc:group-key()}"> <dc:for-each> <dc:choose> <dc:when test="$ld_m = 'location'"> <dc:variable name="combined_desc" expr="concat($facet_description, ' an KM ', $deffrom)"/> </dc:when> <dc:otherwise> <dc:variable name="combined_desc" expr="concat($facet_description, ' von KM ', $deffrom, ' bis KM ', $defto)"/> </dc:otherwise> </dc:choose> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${combined_desc}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="longitudinal_section"/> </dc:element> </dc:for-each> </waterlevels> </dc:call-macro> </waterlevels> </dc:if> </dc:filter> </dc:macro> <dc:comment comment="For building differences." /> <dc:macro name="differenceable-fix"> <dc:comment> No diffs between beddiffs and others, for now. <beddifferences> <dc:call-macro name="bedheight_differences"/> </beddifferences> </dc:comment> <dc:comment comment="Vollmer curves need own factory"/> <dc:filter expr="$a_state = 'state.fix.vollmer.compute' and $facet_name = 'longitudinal_section.w'"> <dc:if test="dc:has-result()"> <vollmer_waterlevels> <dc:call-macro name="collection-group"> <waterlevels description="{dc:group-key()}"> <dc:for-each> <dc:choose> <dc:when test="$ld_m = 'location'"> <dc:variable name="combined_desc" expr="concat($facet_description, ' an KM ', $deffrom)"/> </dc:when> <dc:otherwise> <dc:variable name="combined_desc" expr="concat($facet_description, ' von KM ', $deffrom, ' bis KM ', $defto)"/> </dc:otherwise> </dc:choose> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${combined_desc}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="fixanalysis"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="longitudinal_section"/> </dc:element> </dc:for-each> </waterlevels> </dc:call-macro> </vollmer_waterlevels> </dc:if> </dc:filter> <dc:filter expr="not($a_state = 'state.fix.vollmer.compute') and (($out_name = 'longitudinal_section' and $facet_name = 'longitudinal_section.w') and (not ($current-state-id = 'state.winfo.uesk.wsp' and $ld_m = 'location')))"> <dc:if test="dc:has-result()"> <waterlevels> <dc:call-macro name="collection-group"> <waterlevels description="{dc:group-key()}"> <dc:for-each> <dc:choose> <dc:when test="$ld_m = 'location'"> <dc:variable name="combined_desc" expr="concat($facet_description, ' an KM ', $deffrom)"/> </dc:when> <dc:otherwise> <dc:variable name="combined_desc" expr="concat($facet_description, ' von KM ', $deffrom, ' bis KM ', $defto)"/> </dc:otherwise> </dc:choose> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${combined_desc}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="longitudinal_section"/> </dc:element> </dc:for-each> </waterlevels> </dc:call-macro> </waterlevels> </dc:if> </dc:filter> </dc:macro> <dc:macro name="floodmap-hws-user"> <dc:comment>No grouping in this?</dc:comment> <dc:filter expr="$out_name = 'floodmap' and $facet_name = 'floodmap.usershape'"> <own-hws> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="floodmap"/> </dc:element> </dc:for-each> </own-hws> </dc:filter> </dc:macro> <dc:macro name="bedquality"> <dc:filter expr="$out_name = 'bed_longitudinal_section' and ($facet_name = 'bed_longitudinal_section.bed_diameter_toplayer' or $facet_name = 'bed_longitudinal_section.bed_diameter_sublayer' or $facet_name = 'bed_longitudinal_section.bedload_diameter' or $facet_name = 'bed_longitudinal_section.sediment_density_toplayer' or $facet_name = 'bed_longitudinal_section.sediment_density_sublayer' or $facet_name = 'bed_longitudinal_section.porosity_toplayer' or $facet_name = 'bed_longitudinal_section.porosity_sublayer')"> <dc:if test="dc:has-result()"> <bed_quality> <dc:call-macro name="collection-group"> <quality-bed description="{dc:group-key()}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="bed_longitudinal_section"/> </dc:element> </dc:for-each> </quality-bed> </dc:call-macro> </bed_quality> </dc:if> </dc:filter> </dc:macro> <dc:macro name="flow-velocity"> <dc:filter expr="$out_name = 'flow_velocity' and starts-with($facet_name, 'flow_velocity')"> <dc:if test="dc:has-result()"> <flow_velocity> <dc:call-macro name="collection-group"> <flow description="{dc:group-key()}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="flow_velocity"/> </dc:element> </dc:for-each> </flow> </dc:call-macro> </flow_velocity> </dc:if> </dc:filter> </dc:macro> <dc:macro name="sediment-load"> <dc:filter expr="$out_name = 'sedimentload_ls' and starts-with($facet_name, 'sedimentload')"> <dc:if test="dc:has-result()"> <sediment_load> <dc:call-macro name="collection-group"> <load description="{dc:group-key()}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:comment> <!--dc:attribute name="info" value="debug: ${facet_num}-${facet_name}"/--> </dc:comment> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="sedimentload_ls"/> </dc:element> </dc:for-each> </load> </dc:call-macro> </sediment_load> </dc:if> </dc:filter> </dc:macro> <dc:macro name="bedheight_differences"> <dc:filter expr="($out_name = 'bed_difference_year' or $out_name = 'bed_difference_height_year') and (starts-with($facet_name, 'bedheight_difference.year') or starts-with($facet_name, 'bedheight_difference.height'))"> <dc:if test="dc:has-result()"> <bedheight_differences> <dc:call-macro name="collection-group"> <difference description="{dc:group-key()}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="${out_name}"/> </dc:element> </dc:for-each> </difference> </dc:call-macro> </bedheight_differences> </dc:if> </dc:filter> </dc:macro> <dc:macro name="sqrelations_user"> <dc:filter expr=" ($out = 'sq_relation_a' and starts-with($facet_name, 'sq_a_')) or ($out = 'sq_relation_b' and starts-with($facet_name, 'sq_b_')) or ($out = 'sq_relation_c' and starts-with($facet_name, 'sq_c_')) or ($out = 'sq_relation_d' and starts-with($facet_name, 'sq_d_')) or ($out = 'sq_relation_e' and starts-with($facet_name, 'sq_e_')) or ($out = 'sq_relation_f' and starts-with($facet_name, 'sq_f_'))"> <dc:if test="dc:has-result()"> <sq_relations> <dc:call-macro name="collection-group"> <sqrel description="{dc:group-key()}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="${out_name}"/> </dc:element> </dc:for-each> </sqrel> </dc:call-macro> </sq_relations> </dc:if> </dc:filter> </dc:macro> <dc:macro name="waterlevels-discharge"> <dc:filter expr="$out_name = 'discharge_longitudinal_section'"> <dc:if test="dc:has-result()"> <waterlevels_discharge> <dc:call-macro name="collection-group"> <discharge description="{dc:group-key()}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="target_out" value="${out}"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="discharge_longitudinal_section"/> </dc:element> </dc:for-each> </discharge> </dc:call-macro> </waterlevels_discharge> </dc:if> </dc:filter> </dc:macro> <!-- Macros to load system data --> <dc:macro name="annotations"> <annotation factory="annotations" ids="{$river_id}" target_out="{$out}" /> </dc:macro> <dc:macro name="mainvalues"> <wmainvalue factory="mainvalue" ids="{$river_id}:w" target_out="{$out}" /> <qmainvalue factory="mainvalue" ids="{$river_id}:q" target_out="{$out}" /> </dc:macro> <dc:macro name="cross_sections"> <cross_sections id="flood-protections-{$river_id}"> <dc:context connection="system"> <dc:statement> SELECT DISTINCT cs.id AS prot_id, cs.description AS prot_description FROM cross_sections cs JOIN cross_section_lines csl ON csl.cross_section_id = cs.id WHERE cs.river_id = ${river_id} AND csl.km BETWEEN ${fromkm} AND ${tokm} </dc:statement> <dc:for-each> <cross_section name="{$prot_description}" ids="{$prot_id}" factory="crosssections" target_out="{$out}" /> </dc:for-each> </dc:context> </cross_sections> </dc:macro> <dc:macro name="hyks"> <hyks id="hyk-{$river_id}"> <dc:context connection="system"> <dc:statement> SELECT DISTINCT h.id AS hyk_id, h.description AS hyk_description FROM hyks h JOIN hyk_entries he ON he.hyk_id = h.id WHERE river_id = ${river_id} AND he.km BETWEEN ${fromkm} AND ${tokm} </dc:statement> <dc:for-each> <hyk name="{$hyk_description}" ids="{$hyk_id}" factory="hyk" target_out="{$out}" /> </dc:for-each> </dc:context> </hyks> </dc:macro> <dc:macro name="fixings-macro"> <dc:filter expr="$kind=2"> <dc:if test="dc:has-result()"> <fixations> <dc:group expr="dc:replace($wst_description, 'Fixierungen/', '')"> <fixation name="{dc:group-key()}"> <dc:for-each> <dc:macro-body/> </dc:for-each> </fixation> </dc:group> </fixations> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_2_fixations_wqkms"> <dc:call-macro name="fixings-macro"> <column name="{$wst_column_name}" ids="fixations-wstv-{$wst_column_position}-{$wst_id}" factory="wqinterpol" target_out="{$out}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:call-macro> </dc:macro> <dc:macro name="basedata_2_fixations"> <dc:call-macro name="fixings-macro"> <column name="{$wst_column_name}" ids="fixations-wstv-{$wst_column_position}-{$wst_id}" factory="staticwqkms" target_out="{$out}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:call-macro> </dc:macro> <dc:macro name="basedata_3_officials"> <dc:filter expr="$kind=3"> <dc:if test="dc:has-result()"> <officiallines> <dc:group expr="$wst_description"> <official name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="additionals-wstv-{$wst_column_position}-{$wst_id}" factory="staticwqkms" target_out="{$out}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </official> </dc:group> </officiallines> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_3_officials_wq"> <dc:filter expr="$kind=3"> <dc:if test="dc:has-result()"> <officiallines> <dc:group expr="$wst_description"> <official name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="officials_wq-wstv-{$wst_column_position}-{$wst_id}" factory="wqinterpol" target_out="{$out}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </official> </dc:group> </officiallines> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_4_heightmarks-points"> <dc:filter expr="$kind=4"> <dc:if test="dc:has-result()"> <heightmarks> <dc:group expr="dc:replace($wst_description, 'HW-Marken/', '')"> <heightmark name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="heightmarks_points-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" target_out="{$out}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </heightmark> </dc:group> </heightmarks> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_4_heightmarks-points-relative_points"> <dc:filter expr="$kind=4"> <dc:if test="dc:has-result()"> <heightmarks> <dc:group expr="dc:replace($wst_description, 'HW-Marken/', '')"> <relativepoint name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="heightmarks_points-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" target_out="{$out}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </relativepoint> </dc:group> </heightmarks> </dc:if> </dc:filter> </dc:macro> <dc:macro name="discharge-curve-prototype"> <dc:call-macro name="discharge_table_gauge"/> <dc:call-macro name="historical_discharge_curve"/> <dc:call-macro name="basedata_0_wq"/> <dc:call-macro name="basedata_3_officials_wq"/> <dc:call-macro name="basedata_2_fixations_wqkms"/> <dc:call-macro name="basedata_4_heightmarks-points"/> </dc:macro> <dc:macro name="longitudinal-section-prototype"> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_2_fixations"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="basedata_4_heightmarks-points"/> <dc:call-macro name="basedata_5_flood-protections"/> <dc:call-macro name="annotations_per_type"/> <minfo> <fixanalysis> <dc:call-macro name="basedata_6_delta_w"/> <dc:call-macro name="basedata_7_waterlevels"/> </fixanalysis> <dc:call-macro name="yields"/> <dc:call-macro name="densities"/> <dc:call-macro name="minfo-heights"/> <dc:call-macro name="sounding-width"/> <dc:call-macro name="morph_width"/> <dc:call-macro name="porosities"/> <flow_velocities> <dc:call-macro name="flow_velocity_measurements"/> <dc:call-macro name="flow_velocity_models"/> </flow_velocities> </minfo> </dc:macro> <dc:macro name="longitudinal-section-user-prototype"> <dc:comment> WINFO/DIFF/FIX </dc:comment> <dc:call-macro name="longitudinal"/> <dc:call-macro name="differences"/> <dc:call-macro name="waterlevels-discharge"/> <dc:call-macro name="longitudinal-section-fix"/> <dc:call-macro name="longitudinal-section-fix-vollmer"/> <dc:comment> MINFO </dc:comment> <dc:call-macro name="bedheight_differences"/> <dc:call-macro name="bedquality"/> <dc:call-macro name="flow-velocity"/> <dc:call-macro name="sediment-load"/> </dc:macro> <dc:macro name="porosities"> <porosities> <dc:context> <dc:statement> SELECT DISTINCT p.id AS pid, p.description AS description, d.lower AS depth_lower, d.upper AS depth_upper, p.description || '<BR>' || 'Tiefe: ' || d.lower || ' - ' || d.upper || ' cm <BR>' || 'Zeitraum: ' || t.start_time || ' - ' || t.stop_time AS info FROM porosity p JOIN depths d ON p.depth_id = d.id JOIN time_intervals t ON p.time_interval_id=t.id WHERE p.river_id = ${river_id} ORDER BY depth_lower, depth_upper </dc:statement> <dc:if test="dc:has-result()"> <dc:for-each> <porosity description="{$depth_lower}-{$depth_upper} cm" factory="porosity" target_out="{$out}" info="{$info}" ids="{$pid};{$description}" /> </dc:for-each> </dc:if> </dc:context> </porosities> </dc:macro> <dc:macro name="densities"> <densities> <dc:context> <dc:statement> SELECT DISTINCT sd.id AS sdid, sd.description AS description, d.lower AS depth_lower, d.upper AS depth_upper, min(sdv.year) AS year FROM sediment_density sd JOIN depths d ON sd.depth_id = d.id JOIN sediment_density_values sdv on sdv.sediment_density_id = sd.id WHERE sd.river_id = ${river_id} GROUP BY sd.id, sd.description, d.upper, d.lower ORDER BY year, depth_lower, depth_upper </dc:statement> <dc:if test="dc:has-result()"> <dc:for-each> <density description="{$depth_lower}-{$depth_upper} cm" factory="sedimentdensity" target_out="{$out}" info="{$description}" ids="{$sdid}" /> </dc:for-each> </dc:if> </dc:context> </densities> </dc:macro> <dc:macro name="one-load"> <dc:for-each> <dc:variable name="syear" type="string" expr="dc:date-format('yyyy', $year)"/> <year description="{$syear}" factory="sedimentyield" target_out="{$out}" info="{$description}" ids="{$syid}" /> </dc:for-each> </dc:macro> <dc:macro name="epoch-load"> <dc:for-each> <dc:variable name="syear" type="string" expr="dc:date-format('yyyy', $startyear)"/> <dc:variable name="eyear" type="string" expr="dc:date-format('yyyy', $endyear)"/> <year description="{$syear}-{$eyear}" factory="sedimentyield" target_out="{$out}" info="{$description}" ids="{$syid}" /> </dc:for-each> </dc:macro> <dc:macro name="loads"> <dc:if test="dc:has-result()"> <dc:filter expr="$fraction='sand'"> <dc:if test="dc:has-result()"> <sand> <dc:macro-body/> </sand> </dc:if> </dc:filter> <dc:filter expr="$fraction='fine_middle'"> <dc:if test="dc:has-result()"> <fine_middle> <dc:macro-body/> </fine_middle> </dc:if> </dc:filter> <dc:filter expr="$fraction='coarse'"> <dc:if test="dc:has-result()"> <coarse> <dc:macro-body/> </coarse> </dc:if> </dc:filter> <dc:filter expr="$fraction='suspended_sediment'"> <dc:if test="dc:has-result()"> <susp_sediment> <dc:macro-body/> </susp_sediment> </dc:if> </dc:filter> <dc:filter expr="$fraction='susp_sand'"> <dc:if test="dc:has-result()"> <susp_sand> <dc:macro-body/> </susp_sand> </dc:if> </dc:filter> <dc:filter expr="$fraction='susp_sand_bed'"> <dc:if test="dc:has-result()"> <susp_sand_bed> <dc:macro-body/> </susp_sand_bed> </dc:if> </dc:filter> <dc:filter expr="$fraction='total'"> <dc:if test="dc:has-result()"> <total_load> <dc:macro-body/> </total_load> </dc:if> </dc:filter> </dc:if> </dc:macro> <dc:macro name="yields"> <yields> <dc:call-macro name="annotations_sediment_yield"/> <years> <dc:context> <dc:statement> SELECT DISTINCT sy.id AS syid, sy.description AS description, ti.start_time AS year, gf.name AS fraction FROM sediment_yield sy JOIN rivers r ON sy.river_id = r.id JOIN sediment_yield_values syv ON sy.id = syv.sediment_yield_id JOIN time_intervals ti ON sy.time_interval_id = ti.id JOIN grain_fraction gf ON gf.id = sy.grain_fraction_id WHERE r.id = ${river_id} AND ti.stop_time IS NULL AND syv.station BETWEEN ${fromkm} AND ${tokm} ORDER BY fraction, year DESC </dc:statement> <dc:call-macro name="loads"> <dc:call-macro name="one-load"/> </dc:call-macro> </dc:context> </years> <epochs> <dc:context> <dc:statement> SELECT DISTINCT sy.id AS syid, sy.description AS description, ti.start_time AS startyear, ti.stop_time AS endyear, gf.name AS fraction FROM sediment_yield sy JOIN rivers r ON sy.river_id = r.id JOIN sediment_yield_values syv ON sy.id = syv.sediment_yield_id JOIN time_intervals ti ON sy.time_interval_id = ti.id JOIN grain_fraction gf ON gf.id = sy.grain_fraction_id WHERE r.id = ${river_id} AND ti.stop_time IS NOT NULL AND syv.station BETWEEN ${fromkm} AND ${tokm} ORDER BY fraction, startyear DESC, endyear DESC </dc:statement> <dc:call-macro name="loads"> <dc:call-macro name="epoch-load"/> </dc:call-macro> </dc:context> </epochs> </yields> </dc:macro> <dc:macro name="basedata_5_flood-protections"> <dc:filter expr="$kind=5"> <dc:if test="dc:has-result()"> <flood_protections> <dc:group expr="dc:replace($wst_description, 'HW-Schutzanlagen/', '')"> <flood_protection name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="flood_protection-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" target_out="{$out}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </flood_protection> </dc:group> </flood_protections> </dc:if> </dc:filter> </dc:macro> <dc:macro name="annotations_per_type"> <annotations> <dc:context> <all_annotations factory="annotations" ids="{$river_id}" target_out="{$out}" /> <dc:statement> SELECT id AS anno_id, name AS anno_description FROM annotation_types </dc:statement> <dc:for-each> <annotation name="{$anno_description}" factory="annotations" target_out="{$out}" ids="{$river_id}:{$anno_description}"/> </dc:for-each> </dc:context> </annotations> </dc:macro> <dc:macro name="annotations_sediment_yield"> <sources_sinks> <dc:context> <dc:statement> SELECT id AS anno_id, name AS anno_description FROM annotation_types WHERE name LIKE 'Quelle%' OR name LIKE 'Senke%' </dc:statement> <dc:for-each> <annotation name="{$anno_description}" factory="annotations" target_out="{$out}" ids="{$river_id}:{$anno_description}"/> </dc:for-each> </dc:context> </sources_sinks> </dc:macro> <dc:macro name="basedata_2_fixations_relative_point"> <dc:filter expr="$kind=2"> <dc:if test="dc:has-result()"> <fixations> <dc:group expr="dc:replace($wst_description, 'Fixierungen/', '')"> <relativepoint name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="fixations-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" target_out="{$out}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </relativepoint> </dc:group> </fixations> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_5_flood-protections_relative_points"> <dc:filter expr="$kind=5"> <dc:if test="dc:has-result()"> <flood_protections> <dc:group expr="$wst_description"> <relativepoint name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="flood_protection-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" target_out="{$out}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </relativepoint> </dc:group> </flood_protections> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_1_additionals-relative_point"> <dc:filter expr="$kind=1"> <dc:if test="dc:has-result()"> <additionals> <dc:group expr="$wst_description"> <relativepoint name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="additionals-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" target_out="{$out}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </relativepoint> </dc:group> </additionals> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_7_waterlevels"> <dc:filter expr="$kind=7"> <dc:if test="dc:has-result()"> <wlevel> <dc:group expr="dc:replace($wst_description, 'CSV/', '')"> <relativepoint name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="additionals-wstv-{$wst_column_position}-{$wst_id}" factory="staticwqkms" target_out="{$out}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </relativepoint> </dc:group> </wlevel> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_6_delta_w"> <dc:filter expr="$kind=6"> <dc:if test="dc:has-result()"> <delta_w> <delta_w_cm> <dc:filter expr="contains($wst_description, 'cm.csv')"> <dc:group expr="dc:replace($wst_description, 'CSV/', '')"> <relativepoint name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="delta_w-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" target_out="{$out}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </relativepoint> </dc:group> </dc:filter> </delta_w_cm> <delta_w_cma> <dc:filter expr="contains($wst_description, 'cm-a.csv')"> <dc:group expr="dc:replace($wst_description, 'CSV/', '')"> <relativepoint name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="delta_w_cma-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" target_out="{$out}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </relativepoint> </dc:group> </dc:filter> </delta_w_cma> </delta_w> </dc:if> </dc:filter> </dc:macro> <dc:macro name="discharge_table_gauge"> <dc:context> <dc:statement> SELECT g.id AS gauge_id, g.name AS gauge_name, t.start_time AS start_time, t.stop_time AS stop_time FROM gauges g JOIN discharge_tables dt ON g.id = dt.gauge_id LEFT JOIN time_intervals t ON dt.time_interval_id = t.id WHERE g.river_id = ${river_id} AND dt.kind = 0 AND ((g.station = ${fromkm} AND g.station = ${tokm}) OR g.official_number = ${refgauge}) </dc:statement> <dc:if test="dc:has-result()"> <dc:for-each> <current_gauge factory="gaugedischarge" target_out="{$out}" ids="{$gauge_name}"/> </dc:for-each> </dc:if> </dc:context> </dc:macro> <dc:macro name="qsectors"> <qsector factory="qsectors" ids="{$river_id}" target_out="{$out}" /> </dc:macro> <dc:macro name="flood-map-recommended"> <kilometrage> <riveraxis factory="riveraxis" ids="{$river_id}" target_out="{$out}" /> </kilometrage> <rastermap> <background factory="wmsbackground" ids="{$river_id}" target_out="{$out}" /> </rastermap> </dc:macro> <dc:macro name="minfo-heights"> <dc:comment> The input here is a list differenc ids noted in the form: [2726deb8-e71f-4acc-bc57-c7ae6062df2e;bedheight;0;FP-Mai2006vHW]# [df79ba16-7e2a-43d6-b15b-34dca1fd9bff;bedheight;0;FP-2007_0-286]# [027ba0ac-5453-4e63-a99b-1feeb82a4e06;bedheight;0;QP-2002nHW]# [26b9b6eb-1ce5-4011-83c7-b88e15e99870;bedheight;0;FP-Nov2008] (Linebreaks inserted for readability) We take this string and look for all 4 digit numbers (\d{4}) after we have removed the uuids from the input string (dc:replace all). On this list of numbers we use the dc:min/max-number functions to get the extreme values and interpret the result as a number. </dc:comment> <dc:choose> <dc:when test="dc:contains($parameters, 'diffids')"> <dc:variable name="year_from" expr=" dc:min-number( dc:find-all( '\d{4}', dc:replace-all( $diffids, '[\da-f]{8}-[\da-f]{4}-[\da-f]{4}-[\da-f]{4}-[\da-f]{12}', '')))" type="number"/> <dc:if test="$year_from = dc:min-number('x')"> <dc:variable name="year_from" expr="0" type="number"/> </dc:if> <dc:variable name="year_to" expr=" dc:max-number( dc:find-all( '\d{4}', dc:replace-all( $diffids, '[\da-f]{8}-[\da-f]{4}-[\da-f]{4}-[\da-f]{4}-[\da-f]{12}', '')))" type="number"/> <dc:if test="$year_to = dc:max-number('x')"> <dc:variable name="year_to" expr="9999" type="number"/> </dc:if> </dc:when> <dc:otherwise> <dc:comment>Just show everything</dc:comment> <dc:variable name="year_to" expr="9999" type="number"/> <dc:variable name="year_from" expr="0" type="number"/> </dc:otherwise> </dc:choose> <bedheights> <dc:call-macro name="bed-heights-single"/> <dc:call-macro name="bed-heights-epoch"/> </bedheights> </dc:macro> <dc:macro name="bed-heights-single"> <single> <dc:context> <dc:statement> SELECT bhs.id AS bedh_id, bhs.year AS bedh_year, bhs.description AS bedh_descr, bht.name AS type_name FROM bed_height_single bhs JOIN bed_height_type bht ON bht.id = bhs.type_id WHERE bhs.river_id = ${river_id} AND lower(bhs.description) NOT LIKE '%epoch%' AND bhs.year BETWEEN ${year_from} AND ${year_to} </dc:statement> <dc:if test="dc:has-result()"> <dc:group expr="$bedh_year"> <cross-sections name="{dc:group-key()}"> <dc:for-each> <height factory="bedheight" target_out="{$out}" ids="bedheight-single-{$bedh_id}-{$bedh_year}" info="{$type_name}" description="{$bedh_descr}"/> </dc:for-each> </cross-sections> </dc:group> </dc:if> </dc:context> </single> </dc:macro> <dc:macro name="bed-heights-epoch"> <epoch> <dc:context> <dc:statement> SELECT id AS bedh_id, year AS bedh_year, description AS bedh_descr FROM bed_height_single WHERE river_id = ${river_id} AND lower(description) LIKE '%epoch%' AND year BETWEEN ${year_from} AND ${year_to} </dc:statement> <dc:for-each> <height factory="bedheight" target_out="{$out}" ids="bedheight-single-{$bedh_id}-{$bedh_year}" description="{$bedh_descr}"/> </dc:for-each> </dc:context> </epoch> </dc:macro> <dc:macro name="flow_velocity_models"> <dc:context> <dc:statement> SELECT fvm.id AS fvmid, fvm.description AS fvmd, dz.upper_discharge AS upperQ, dz.lower_discharge AS lowerQ FROM flow_velocity_model fvm JOIN discharge_zone dz ON dz.id = fvm.discharge_zone_id WHERE dz.river_id = ${river_id} ORDER BY dz.value </dc:statement> <dc:if test="dc:has-result()"> <flowvelocitymodel> <dc:for-each> <measurement_value name="{$fvmd}" ids="{$fvmid}" factory="flowvelocitymodel" info="{$lowerQ} - {$upperQ}" target_out="{$out}" /> </dc:for-each> </flowvelocitymodel> </dc:if> </dc:context> </dc:macro> <dc:macro name="flow_velocity_measurements"> <dc:context> <dc:statement> SELECT id AS fvmid, description AS fvmd FROM flow_velocity_measurements WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <flowvelocitymeasurement> <dc:for-each> <flow_velocity_measurement name="{$fvmd}"> <dc:context> <dc:statement> SELECT id, description, station, datetime, v, w, q FROM flow_velocity_measure_values WHERE measurements_id = ${fvmid} AND station BETWEEN ${fromkm} AND ${tokm} </dc:statement> <dc:for-each> <measurement_value name="{$description} - {$station} - {$datetime}" ids="{$id}" factory="flowvelocity" target_out="{$out}" /> </dc:for-each> </dc:context> </flow_velocity_measurement> </dc:for-each> </flowvelocitymeasurement> </dc:if> </dc:context> </dc:macro> <dc:macro name="morph_width"> <dc:context> <dc:statement> SELECT id AS width_id FROM morphologic_width WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <morph_width> <dc:for-each> <dc:context> <dc:statement> SELECT min(station) AS from_station, max(station) AS to_station FROM morphologic_width_values WHERE morphologic_width_id = ${width_id} </dc:statement> <dc:for-each> <morphologic-width name="{$from_station} - {$to_station}" ids="{$width_id}" factory="morph-width" target_out="{$out}" /> </dc:for-each> </dc:context> </dc:for-each> </morph_width> </dc:if> </dc:context> </dc:macro> <dc:macro name="sounding-width"> <dc:context> <dc:statement> SELECT id AS bedh_id, year AS bedh_year, description AS bedh_descr FROM bed_height_single WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <soundings_width> <dc:for-each> <height factory="bedheight" target_out="{$out}" ids="bedheight-soundings-{$bedh_id}-{$bedh_year}" description="{$bedh_descr}"/> </dc:for-each> </soundings_width> </dc:if> </dc:context> </dc:macro> <dc:macro name="sqrelations"> <dc:context> <dc:statement> SELECT sq.description AS description, ti.start_time AS start_time, ti.stop_time AS stop_time, ms.name AS station_name, lower(sqv.parameter) AS parameter, sqv.id AS sqvid, ra.a AS station_km FROM sq_relation sq JOIN time_intervals ti ON ti.id = sq.time_interval_id JOIN rivers r ON r.id = sq.river_id JOIN sq_relation_value sqv ON sqv.sq_relation_id = sq.id JOIN measurement_station ms ON sqv.measurement_station_id = ms.id JOIN ranges ra ON ms.range_id = ra.id WHERE r.id = ${river_id} ORDER BY station_km, start_time, stop_time </dc:statement> <dc:if test="dc:has-result()"> <sq_relations> <dc:filter expr="$out = concat('sq_relation_', $parameter)"> <dc:group expr="$station_km" type="number"> <dc:group expr="concat('km ', $station_km, ': ', $station_name)"> <station description="{dc:group-key()}"> <dc:for-each> <dc:variable name="combined_desc" expr="concat(dc:date-format('yyyy', $start_time), ' bis ', dc:date-format('yyyy', $stop_time))"/> <sqvalue factory="staticsqrelation" target_out="{$out}" ids="{$sqvid};{$station_name}: {$combined_desc}" description="{$combined_desc}"/> </dc:for-each> </station> </dc:group> </dc:group> </dc:filter> </sq_relations> </dc:if> </dc:context> </dc:macro> <dc:macro name="basedata_0_macro"> <dc:filter expr="$kind = 0"> <dc:if test="dc:has-result()"> <basedata> <dc:group expr="$wst_description"> <basedata name="{dc:group-key()}"> <dc:for-each> <dc:macro-body/> </dc:for-each> </basedata> </dc:group> </basedata> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_0"> <dc:call-macro name="basedata_0_macro"> <column name="{$wst_column_name}" ids="base_data-wstv-{$wst_column_position}-{$wst_id}" factory="staticwqkms" target_out="{$out}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:call-macro> </dc:macro> <dc:macro name="basedata_0_wq"> <dc:call-macro name="basedata_0_macro"> <column name="{$wst_column_name}" ids="base_data-wstv-{$wst_column_position}-{$wst_id}" factory="wqinterpol" target_out="{$out}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:call-macro> </dc:macro> <dc:macro name="basedata_1_additionals_macro"> <dc:filter expr="$kind=1"> <dc:if test="dc:has-result()"> <additionals> <dc:group expr="dc:replace($wst_description, 'Zus.Längsschnitte/', '')"> <additional name="{dc:group-key()}"> <dc:for-each> <dc:macro-body/> </dc:for-each> </additional> </dc:group> </additionals> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_1_additionals"> <dc:call-macro name="basedata_1_additionals_macro"> <column name="{$wst_column_name}" ids="additionals-wstv-{$wst_column_position}-{$wst_id}" factory="staticwqkms" target_out="{$out}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:call-macro> </dc:macro> <dc:macro name="basedata_1_additionals_marks"> <dc:call-macro name="basedata_1_additionals_macro"> <column name="{$wst_column_name}" ids="additionalsmarks-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" target_out="{$out}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:call-macro> </dc:macro> <dc:macro name="basedata_1_additionals_wq"> <dc:call-macro name="basedata_1_additionals_macro"> <column name="{$wst_column_name}" ids="base_data-wstv-{$wst_column_position}-{$wst_id}" factory="wqinterpol" target_out="{$out}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:call-macro> </dc:macro> <!-- Floodmap part --> <dc:macro name="flood-map-complete"> <dc:call-macro name="flood-map-buildings"/> <dc:call-macro name="catchments"/> <dc:call-macro name="floodmarks"/> <hws> <dc:call-macro name="hwslines"/> <dc:call-macro name="hwspoints"/> </hws> <dc:call-macro name="flood-map-routing"/> <hydrboundaries> <dc:call-macro name="flood-map-floodplain"/> <dc:call-macro name="flood-map-hydr-boundaries"/> </hydrboundaries> <dc:call-macro name="flood-map-uesk"/> </dc:macro> <dc:macro name="flood-map-routing"> <route_data> <dc:call-macro name="flood-map-qps"/> <dc:call-macro name="flood-map-fixpoints"/> <dc:call-macro name="flood-map-km"/> <dc:call-macro name="flood-map-riveraxis"/> </route_data> </dc:macro> <dc:macro name="flood-map-hydr-boundaries"> <bfg_model> <dc:call-macro name="flood-map-hydr-boundaries-poly"/> <dc:call-macro name="flood-map-hydr-boundaries-lines"/> </bfg_model> <dc:call-macro name="flood-map-hydr-boundaries-state"/> </dc:macro> <dc:macro name="flood-map-dem"> <dems> <dc:context> <dc:statement> SELECT d.id AS dem_id, r.a AS dem_lower, r.b AS dem_upper, d.name AS name, t.start_time AS start_time, t.stop_time AS stop_time, 'Projektion: ' || d.projection || '<BR>' || 'Rasterweite: ' || d.resolution || 'm<BR>' || 'Format: ' || d.format || '<BR>' || 'Zeitraum: ' AS info FROM dem d JOIN ranges r ON d.range_id = r.id LEFT JOIN time_intervals t ON d.time_interval_id = t.id WHERE d.river_id = ${river_id} AND NOT((${tokm} < r.a) or (${fromkm} > r.b)) </dc:statement> <dc:for-each> <dem factory="demfactory" target_out="{$out}" ids="{$dem_id}" name="{$name}" info="{$info}{dc:date-format('yyyy', $start_time)} - {dc:date-format('yyyy', $stop_time)}"/> </dc:for-each> </dc:context> </dems> </dc:macro> <dc:macro name="filter_hws_ddg"> <dc:macro name="durchlass_damm_graben"> <dc:macro name="ddg_factory"> <dc:for-each> <hws factory="hwsfactory" name="{$hws_name}" target_out="{$out}" /> </dc:for-each> </dc:macro> <dc:filter expr="$hws_kind=1"> <dc:if test="dc:has-result()"> <Durchlass><dc:call-macro name="ddg_factory"/></Durchlass> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=2"> <dc:if test="dc:has-result()"> <Damm><dc:call-macro name="ddg_factory"/></Damm> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=3"> <dc:if test="dc:has-result()"> <Graben><dc:call-macro name="ddg_factory"/></Graben> </dc:if> </dc:filter> </dc:macro> <dc:filter expr="$hws_official=1"> <dc:if test="dc:has-result()"> <official> <dc:call-macro name="durchlass_damm_graben"/> </official> </dc:if> </dc:filter> <dc:filter expr="$hws_official=0"> <dc:if test="dc:has-result()"> <inofficial> <dc:call-macro name="durchlass_damm_graben"/> </inofficial> </dc:if> </dc:filter> </dc:macro> <dc:macro name="flood-map-hws-lines"> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, official AS hws_official, kind_id AS hws_kind FROM hws_lines WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <lines> <dc:call-macro name="filter_hws_ddg"/> </lines> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-hws-points"> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, official AS hws_official, kind_id AS hws_kind FROM hws_points WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <points> <dc:call-macro name="filter_hws_ddg"/> </points> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-hydr-boundaries-state"> <federal> <dc:context> <dc:statement> SELECT DISTINCT name FROM hydr_boundaries WHERE river_id = ${river_id} AND kind = 2 </dc:statement> <dc:for-each> <line factory="wmshydrboundariesfactory" target_out="{$out}" ids="{$river_id};{$name};2" name="{$name}"/> </dc:for-each> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT name FROM hydr_boundaries_poly WHERE river_id = ${river_id} AND kind = 2 </dc:statement> <dc:for-each> <line factory="wmshydrboundariespolyfactory" target_out="{$out}" ids="{$river_id};{$name};2" name="{$name}"/> </dc:for-each> </dc:context> </federal> </dc:macro> <dc:macro name="flood-map-hydr-boundaries-lines"> <dc:context> <dc:statement> SELECT DISTINCT name FROM hydr_boundaries WHERE river_id = ${river_id} AND kind = 1 </dc:statement> <dc:comment> What about all other line kinds?</dc:comment> <dc:if test="dc:has-result()"> <lines> <dc:for-each> <line factory="wmshydrboundariesfactory" target_out="{$out}" ids="{$river_id};{$name};1" name="{$name}"/> </dc:for-each> </lines> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-hydr-boundaries-poly"> <areas> <dc:context> <dc:statement> SELECT DISTINCT b.sectie AS sectie_id, sk.name AS sectie FROM hydr_boundaries_poly b JOIN sectie_kinds sk ON b.sectie = sk.id WHERE b.river_id = ${river_id} AND b.kind = 1 </dc:statement> <dc:if test="dc:has-result()"> <sobek_areas> <dc:for-each> <boundary name="{$sectie}" factory="wmshydrboundariespolyfactory" target_out="{$out}" ids="{$river_id};{$sectie};1;{$sectie_id};-1"/> </dc:for-each> </sobek_areas> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT b.sobek AS sobek_id, sk.name AS sobek FROM hydr_boundaries_poly b JOIN sobek_kinds sk ON b.sobek = sk.id WHERE b.river_id = ${river_id} AND b.kind = 1 </dc:statement> <dc:if test="dc:has-result()"> <sobek_flooded> <dc:for-each> <boundary name="{$sobek}" factory="wmshydrboundariespolyfactory" target_out="{$out}" ids="{$river_id};{$sobek};1;-1;{$sobek_id}"/> </dc:for-each> </sobek_flooded> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT b.name AS name FROM hydr_boundaries_poly b WHERE b.river_id = ${river_id} AND b.kind = 1 AND b.sobek IS NULL AND b.sectie is NULL </dc:statement> <dc:for-each> <boundary name="{$name}" factory="wmshydrboundariespolyfactory" target_out="{$out}" ids="{$river_id};{$name}"/> </dc:for-each> </dc:context> </areas> </dc:macro> <dc:macro name="flood-map-uesk"> <dc:context> <dc:statement> SELECT DISTINCT 1 FROM floodmaps WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <uesk> <calculations> <dc:context> <dc:statement> SELECT DISTINCT 1 FROM floodmaps WHERE river_id = ${river_id} AND (kind = 112 OR kind = 111) </dc:statement> <dc:if test="dc:has-result()"> <current> <dc:context> <dc:statement> SELECT DISTINCT name AS name FROM floodmaps WHERE river_id = ${river_id} AND kind = 111 </dc:statement> <dc:if test="dc:has-result()"> <bfg> <dc:for-each> <floodmaps factory="wmsfloodmapsfactory" target_out="{$out}" ids="{$river_id};{$name}" name="{$name}"/> </dc:for-each> </bfg> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT name AS name FROM floodmaps WHERE river_id = ${river_id} AND kind = 112 </dc:statement> <dc:if test="dc:has-result()"> <federal> <dc:for-each> <floodmaps factory="wmsfloodmapsfactory" target_out="{$out}" ids="{$river_id};{$name}" name="{$name}"/> </dc:for-each> </federal> </dc:if> </dc:context> </current> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT 1 from floodmaps where river_id = ${river_id} AND (kind = 122 OR kind = 121) </dc:statement> <dc:if test="dc:has-result()"> <potential> <dc:context> <dc:statement> SELECT DISTINCT name AS name FROM floodmaps WHERE river_id = ${river_id} AND kind = 121 </dc:statement> <dc:if test="dc:has-result()"> <bfg> <dc:for-each> <floodmaps factory="wmsfloodmapsfactory" target_out="{$out}" ids="{$river_id};{$name}" name="{$name}"/> </dc:for-each> </bfg> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT name AS name FROM floodmaps WHERE river_id = ${river_id} AND kind = 122 </dc:statement> <dc:if test="dc:has-result()"> <federal> <dc:for-each> <floodmaps factory="wmsfloodmapsfactory" target_out="{$out}" ids="{$river_id};{$name}" name="{$name}"/> </dc:for-each> </federal> </dc:if> </dc:context> </potential> </dc:if> </dc:context> </calculations> <dc:context> <dc:statement> SELECT DISTINCT source AS source FROM floodmaps WHERE river_id = ${river_id} AND kind = 200 </dc:statement> <dc:if test="dc:has-result()"> <measurements> <dc:for-each> <year name="{$source}"> <dc:context> <dc:statement> SELECT DISTINCT name AS name FROM floodmaps WHERE river_id = ${river_id} AND kind = 200 AND source = ${source} </dc:statement> <dc:for-each> <floodmaps factory="wmsfloodmapsfactory" target_out="{$out}" ids="{$river_id};{$name}" name="{$name}"/> </dc:for-each> </dc:context> </year> </dc:for-each> </measurements> </dc:if> </dc:context> </uesk> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-floodplain"> <dc:context> <dc:statement> SELECT DISTINCT fp.kind_id AS kind_id, flk.name AS kind_name FROM floodplain fp JOIN floodplain_kinds flk on fp.kind_id = flk.id WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <floodplain> <dc:filter expr="$kind_id=1"> <dc:for-each> <floody factory="wmsfloodplainfactory" target_out="{$out}" description="{$kind_name}" ids="{$river_id};{$kind_name};{$kind_id}"/> </dc:for-each> </dc:filter> <dc:filter expr="$kind_id != 1"> <dc:if test="dc:has-result()"> <other> <dc:for-each> <floody factory="wmsfloodplainfactory" target_out="{$out}" description="{$layer_name}" ids="{$river_id};{$layer_name};{$kind_id}"/> </dc:for-each> </other> </dc:if> </dc:filter> </floodplain> </dc:if> </dc:context> </dc:macro> <dc:macro name="hwspoints_by_kind"> <dc:comment> Call from a context where fed_name hws_kind hws_name and river_id is availble </dc:comment> <dc:macro name="hwspoints_by_kind_factory"> <dc:for-each> <hws factory="wmshwspointsfactory" target_out="{$out}" ids="{$river_id};{$hws_name}" name="{$hws_name}"/> </dc:for-each> </dc:macro> <dc:filter expr="$hws_kind=1"> <dc:if test="dc:has-result()"> <Durchlass> <dc:call-macro name="hwspoints_by_kind_factory"/> </Durchlass> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=2"> <dc:if test="dc:has-result()"> <Damm> <dc:call-macro name="hwspoints_by_kind_factory"/> </Damm> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=3"> <dc:if test="dc:has-result()"> <Graben> <dc:call-macro name="hwspoints_by_kind_factory"/> </Graben> </dc:if> </dc:filter> </dc:macro> <dc:macro name="hwspoints"> <hws_points> <official> <dc:context> <dc:statement> SELECT DISTINCT fs.name AS fed_name, fs.id AS fed_id FROM hws_points hws JOIN fed_states fs ON hws.fed_state_id = fs.id WHERE river_id = ${river_id} AND hws.official=1 </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, kind_id AS hws_kind FROM hws_points WHERE river_id = ${river_id} AND official=1 AND fed_state_id = ${fed_id} ORDER BY name </dc:statement> <fedstate description="{$fed_name}"> <dc:call-macro name="hwspoints_by_kind"/> </fedstate> </dc:context> </dc:for-each> </dc:context> <dc:context> <dc:statement> SELECT distinct name AS hws_name, kind_id AS hws_kind FROM hws_points WHERE river_id = ${river_id} AND official=1 AND fed_state_id IS NULL ORDER BY name </dc:statement> <hws_fed_unknown> <dc:call-macro name="hwspoints_by_kind"/> </hws_fed_unknown> </dc:context> </official> <inofficial> <dc:context> <dc:statement> SELECT DISTINCT fs.name AS fed_name, fs.id AS fed_id FROM hws_points hws JOIN fed_states fs ON hws.fed_state_id = fs.id WHERE river_id = ${river_id} AND hws.official=0 </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, kind_id AS hws_kind FROM hws_points WHERE river_id = ${river_id} AND official=0 AND fed_state_id = ${fed_id} ORDER BY name </dc:statement> <fedstate description="{$fed_name}"> <dc:call-macro name="hwspoints_by_kind"/> </fedstate> </dc:context> </dc:for-each> </dc:context> <dc:context> <dc:statement> SELECT distinct name AS hws_name, kind_id AS hws_kind FROM hws_points WHERE river_id = ${river_id} AND official=0 AND fed_state_id IS NULL ORDER BY name </dc:statement> <hws_fed_unknown> <dc:call-macro name="hwspoints_by_kind"/> </hws_fed_unknown> </dc:context> </inofficial> </hws_points> </dc:macro> <dc:macro name="hwslines_by_kind"> <dc:comment> Call from a context where fed_name hws_kind hws_name and river_id is availble </dc:comment> <dc:macro name="hwslines_by_kind_factory"> <dc:for-each> <hws factory="wmshwslinesfactory" target_out="{$out}" ids="{$river_id};{$hws_name}" name="{$hws_name}"/> </dc:for-each> </dc:macro> <dc:filter expr="$hws_kind=1"> <dc:if test="dc:has-result()"> <Durchlass> <dc:call-macro name="hwslines_by_kind_factory"/> </Durchlass> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=2"> <dc:if test="dc:has-result()"> <Damm> <dc:call-macro name="hwslines_by_kind_factory"/> </Damm> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=3"> <dc:if test="dc:has-result()"> <Graben> <dc:call-macro name="hwslines_by_kind_factory"/> </Graben> </dc:if> </dc:filter> </dc:macro> <dc:macro name="hwslines"> <hws_lines> <official> <dc:context> <dc:statement> SELECT DISTINCT fs.name AS fed_name, fs.id AS fed_id FROM hws_lines hws JOIN fed_states fs ON hws.fed_state_id = fs.id WHERE river_id = ${river_id} AND hws.official=1 </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, kind_id AS hws_kind FROM hws_lines WHERE river_id = ${river_id} AND official=1 AND fed_state_id = ${fed_id} ORDER BY name </dc:statement> <fedstate description="{$fed_name}"> <dc:call-macro name="hwslines_by_kind"/> </fedstate> </dc:context> </dc:for-each> </dc:context> <dc:context> <dc:statement> SELECT distinct name AS hws_name, kind_id AS hws_kind FROM hws_lines WHERE river_id = ${river_id} AND official=1 AND fed_state_id IS NULL ORDER BY name </dc:statement> <hws_fed_unknown> <dc:call-macro name="hwslines_by_kind"/> </hws_fed_unknown> </dc:context> </official> <inofficial> <dc:context> <dc:statement> SELECT DISTINCT fs.name AS fed_name, fs.id AS fed_id FROM hws_lines hws JOIN fed_states fs ON hws.fed_state_id = fs.id WHERE river_id = ${river_id} AND hws.official=0 </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, kind_id AS hws_kind FROM hws_lines WHERE river_id = ${river_id} AND official=0 AND fed_state_id = ${fed_id} ORDER BY name </dc:statement> <fedstate description="{$fed_name}"> <dc:call-macro name="hwslines_by_kind"/> </fedstate> </dc:context> </dc:for-each> </dc:context> <dc:context> <dc:statement> SELECT distinct name AS hws_name, kind_id AS hws_kind FROM hws_lines WHERE river_id = ${river_id} AND official=0 AND fed_state_id IS NULL ORDER BY name </dc:statement> <hws_fed_unknown> <dc:call-macro name="hwslines_by_kind"/> </hws_fed_unknown> </dc:context> </inofficial> </hws_lines> </dc:macro> <dc:macro name="floodmarks"> <dc:context> <dc:statement> SELECT DISTINCT COALESCE(CAST (year AS VARCHAR(64)), 'Unbekanntes Jahr') AS year FROM flood_marks WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <floodmarks> <dc:for-each> <floodmark name="{$year}" factory="wmsfloodmarkfactory" target_out="{$out}" ids="{$river_id};{$year};{$year}"/> </dc:for-each> </floodmarks> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-gaugelocations"> <gaugelocations> <gauge_points factory="externalwmsfactory" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;Pegelpunkte;Pegelpunkte (WSV)" target_out="{$out}" /> <gauge_names factory="externalwmsfactory" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;Pegelnamen;Pegelnamen (WSV)" target_out="{$out}" /> <gauge_level factory="externalwmsfactory" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;Pegelwasserstand;Aktueller Wasserstand (WSV)" target_out="{$out}" /> <gauge_tendency factory="externalwmsfactory" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;TendenzWasserstand;Tendenz des Wasserstands (WSV)" target_out="{$out}" /> </gaugelocations> </dc:macro> <dc:macro name="flood-map-riveraxis"> <dc:context> <dc:statement> SELECT DISTINCT ak.name AS kind_name, ax.kind_id AS kind_id, ax.name AS layer_name FROM river_axes ax JOIN axis_kinds ak on ax.kind_id = ak.id WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <axis> <dc:filter expr="$kind_id=1"> <dc:for-each> <actual description="{$kind_name}" ids="{$river_id};{$kind_name};{$kind_id}" factory="riveraxis" target_out="{$out}" /> </dc:for-each> </dc:filter> <dc:filter expr="$kind_id!=1"> <other> <dc:for-each> <misc-axis description="{$layer_name}" ids="{$river_id};{$layer_name};{$kind_id}" factory="riveraxis" target_out="{$out}" /> </dc:for-each> </other> </dc:filter> </axis> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-km"> <dc:context> <dc:statement> SELECT DISTINCT 1 FROM river_axes_km WHERE river_id = ${river_id} </dc:statement> <dc:for-each> <kilometrage factory="wmskmfactory" ids="{$river_id}" target_out="{$out}" /> </dc:for-each> </dc:context> </dc:macro> <dc:macro name="flood-map-fixpoints"> <dc:context> <dc:statement> SELECT name AS name FROM fixpoints WHERE river_id = ${river_id} GROUP BY name </dc:statement> <dc:for-each> <fixpoints factory="wmsfixpointsfactory" target_out="{$out}" ids="{$river_id};{$name}"/> </dc:for-each> </dc:context> </dc:macro> <dc:macro name="flood-map-qps"> <dc:context> <dc:statement> SELECT DISTINCT cs.kind_id AS kind_id, cs.name AS layer_name, ck.name AS kind_name FROM cross_section_tracks cs JOIN cross_section_track_kinds ck ON cs.kind_id = ck.id WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <qps> <dc:filter expr="$kind_id=1"> <dc:for-each> <actual description="{$kind_name}" factory="wmsqpsfactory" target_out="{$out}" ids="{$river_id};{$kind_name};{$kind_id}"/> </dc:for-each> </dc:filter> <dc:filter expr="$kind_id = 0"> <dc:if test="dc:has-result()"> <other> <dc:for-each> <misc-qps description="{$layer_name}" factory="wmsqpsfactory" target_out="{$out}" ids="{$river_id};{$layer_name};{$kind_id}"/> </dc:for-each> </other> </dc:if> </dc:filter> </qps> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-buildings"> <buildings> <dc:context> <dc:statement> SELECT DISTINCT b.name AS building_name, bk.name AS building_kind, b.kind_id AS building_kind_id FROM buildings b JOIN building_kinds bk ON b.kind_id = bk.id WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <dc:filter expr="$building_kind_id!=0"> <dc:for-each> <buildings description="{$building_kind}" factory="wmsbuildingsfactory" target_out="{$out}" ids="{$river_id};{$building_kind};{$building_kind_id}"/> </dc:for-each> </dc:filter> <dc:filter expr="$building_kind_id=0"> <other> <dc:for-each> <buildings description="{$building_name}" factory="wmsbuildingsfactory" target_out="{$out}" ids="{$river_id};{$building_name}"/> </dc:for-each> </other> </dc:filter> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT j.kind_id AS jetty_kind_id, jk.name AS jetty_kind FROM jetties j JOIN jetty_kinds jk ON j.kind_id = jk.id WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <jetties> <dc:for-each> <jetty description="{$jetty_kind}" factory="wmsjettiesfactory" target_out="{$out}" ids="{$river_id};{$jetty_kind};{$jetty_kind_id}"/> </dc:for-each> </jetties> </dc:if> </dc:context> </buildings> </dc:macro> <dc:macro name="officiallines_user"> <dc:if test="dc:contains($parameters, 'official-lines')"> <dc:container-context container="official-lines"> <dc:properties> <dc:property name="name" alias="olname"/> <dc:property name="wstId" alias="wstid"/> <dc:property name="columnPos" alias="wstcolpos"/> </dc:properties> <dc:if test="dc:has-result()"> <officiallines> <dc:for-each> <column name="{$olname}" ids="official-wstv-{$wstcolpos}-{$wstid}" factory="staticwqkms" target_out="{$out}"/> </dc:for-each> </officiallines> </dc:if> </dc:container-context> </dc:if> </dc:macro> <!-- Common stuff --> <dc:macro name="km-filtered-wsts"> <dc:context connection="system"> <dc:statement> SELECT w.kind AS kind, w.id AS wst_id, wc.id AS wst_column_id, wc.position AS wst_column_position, wc.description AS info, w.description AS wst_description, COALESCE(wc.name, '') AS wst_column_name, wr.a AS deffrom, wr.b AS defto FROM wst_columns wc JOIN wsts w ON wc.wst_id = w.id JOIN wst_ranges wr ON wc.id = wr.wst_column_id WHERE w.river_id = ${river_id} AND NOT((${tokm} < wr.a) or (${fromkm} > wr.b)) </dc:statement> <dc:macro-body/> </dc:context> </dc:macro> <dc:macro name="all-user-artifacts"> <dc:context connection="user"> <dc:comment>Select collections and masterartifacts. XXX: The cast is a quick hack because the ld_* values are now TEXT fields. To properly fix / asses the problems here an SLT evaluation is needed. </dc:comment> <dc:statement> SELECT c.name AS collection_name, ma.id AS a_id, ma.state AS a_state, ma.gid AS a_gid, ma.creation AS a_creation, CAST(COALESCE(ma.ld_mode, '') AS VARCHAR(255)) AS ld_m, CAST(COALESCE(ma.ld_locations, '') AS VARCHAR(255)) AS ld_l, CAST(COALESCE(ma.ld_from, '') AS VARCHAR(255)) AS ld_f, CAST(COALESCE(ma.ld_to, '') AS VARCHAR(255)) AS ld_t, o.name AS out_name, o.id AS out_id, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description, f.id AS fid FROM users u JOIN collections c ON c.user_id = u.id JOIN master_artifacts_range ma ON ma.collection_id = c.id JOIN outs o ON o.artifact_id = ma.id JOIN facets f ON f.out_id = o.id WHERE u.gid = CAST(${user-id} AS UUID) AND ma.gid <> CAST(${artifact-id} AS uuid) AND f.name NOT LIKE '%empty.facet%' AND EXISTS ( SELECT id FROM artifact_data ad WHERE ad.artifact_id = ma.id AND k = 'river' AND v = ${river}) </dc:statement> <dc:virtual-column name="deffrom" type="number" expr="dc:fromValue($ld_m, $ld_l, $ld_f)"> <dc:virtual-column name="defto" type="number" expr="dc:toValue($ld_m, $ld_l, $ld_t)"> <dc:macro-body/> </dc:virtual-column> </dc:virtual-column> </dc:context> </dc:macro> <dc:macro name="km-filtered-user-artifacts"> <dc:comment> Apply KM Filtering but pass sq_ facets with no regard about their location. </dc:comment> <dc:filter expr="not($deffrom > $tokm or $defto < $fromkm) or starts-with($facet_name, 'sq_')"> <dc:macro-body/> </dc:filter> </dc:macro> <dc:macro name="artifact-range"> <dc:variable name="fromkm" type="number" expr="dc:fromValue(dc:get('ld_mode'), dc:get('ld_locations'), dc:get('ld_from'))"/> <dc:variable name="tokm" type="number" expr="dc:toValue(dc:get('ld_mode'), dc:get('ld_locations'), dc:get('ld_to'))"/> <dc:macro-body/> </dc:macro> </datacage> </dc:template>