Mercurial > dive4elements > river
view artifacts/doc/conf/meta-data.xml @ 6110:5ba28b563614
Fix datacage for user data by adding facet filtering.
Now the facets are joined in the user data select statement
and afterwards we just filter on the facet name where previously
new queryies were created.
Grouping also fixes the repeating folders caused by the change
in the statements during the large perfomance cleanup.
| author | Andre Heinecke <aheinecke@intevation.de> |
|---|---|
| date | Mon, 27 May 2013 15:36:56 +0200 |
| parents | 96b5066ab55e |
| children | 6815714c1f97 |
line wrap: on
line source
<?xml version="1.0" encoding="UTF-8"?> <dc:template xmlns:dc="http://www.intevation.org/2011/Datacage"> <datacage> <dc:comment> User specific part ------------------ </dc:comment> <dc:if test="dc:contains($parameters, 'user-id') and not(dc:contains($artifact-outs, 'floodmap-hws'))"> <dc:call-macro name="load-user"/> </dc:if> <dc:call-macro name="load-system"/> <dc:macro name="load-system"> <dc:context connection="system"> <dc:statement> SELECT id AS river_id, name AS river_name FROM rivers WHERE lower(name) LIKE lower(${river}) </dc:statement> <dc:for-each> <dc:call-macro name="generate-system-content"/> </dc:for-each> </dc:context> </dc:macro> <dc:macro name="load-user"> <old_calculations> <dc:call-macro name="generate-user-content"/> </old_calculations> </dc:macro> <dc:macro name="generate-system-content"> <dc:call-macro name="user-range"> <dc:call-macro name="km-filtered-wsts"> <dc:choose> <dc:when test="dc:contains($parameters, 'recommended')"> <dc:comment> Recommendations (client shall load immediately). </dc:comment> <dc:iterate var="out" container="artifact-outs"> <dc:choose> <dc:when test="$out = 'w_differences'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'discharge_longitudinal_section'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'historical_discharge_wq'"> <dc:call-macro name="mainvalues"/> </dc:when> <dc:when test="$out = 'cross_section'"> <dc:call-macro name="cross_sections"/> <dc:call-macro name="hyks"/> </dc:when> <dc:when test="$out = 'discharge_curve'"> <dc:call-macro name="mainvalues"/> </dc:when> <dc:when test="$out = 'computed_discharge_curve'"> <dc:call-macro name="mainvalues"/> <dc:call-macro name="basedata_2_fixations_wqkms"/> </dc:when> <dc:when test="$out = 'duration_curve'"> <dc:call-macro name="mainvalues"/> </dc:when> <dc:when test="$out = 'reference_curve'"> <dc:call-macro name="annotations"/> <dc:call-macro name="mainvalues"/> </dc:when> <dc:when test="$out = 'fix_wq_curve'"> <dc:call-macro name="mainvalues"/> <dc:call-macro name="qsectors"/> </dc:when> <dc:when test="$out = 'longitudinal_section'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'fix_longitudinal_section_curve'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'bed_difference_epoch'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'bed_difference_year'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'bed_difference_height_year'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'floodmap'"> <dc:call-macro name="flood-map-recommended"/> </dc:when> <dc:when test="$out = 'floodmap-hws'"> <dc:call-macro name="flood-map-recommended"/> </dc:when> <dc:when test="$out = 'minfo-heights'"> <dc:call-macro name="minfo-heights"/> </dc:when> <dc:when test="$out = 'minfo-heights-epoch'"> <bedheights> <dc:call-macro name="bed-heights-epoch"/> </bedheights> </dc:when> </dc:choose> </dc:iterate> </dc:when> <dc:otherwise> <dc:comment> Non - Recommendations. </dc:comment> <dc:iterate var="out" container="artifact-outs"> <dc:choose> <dc:when test="$out = 'cross_section'"> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_2_fixations"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="basedata_4_heightmarks-points"/> <dc:call-macro name="cross_sections"/> <dc:call-macro name="basedata_5_flood-protections"/> <dc:call-macro name="hyks"/> </dc:when> <dc:when test="$out = 'longitudinal_section'"> <dc:call-macro name="longitudinal-section-prototype"/> </dc:when> <dc:when test="$out = 'w_differences'"> <dc:call-macro name="longitudinal-section-prototype"/> </dc:when> <dc:when test="$out = 'discharge_longitudinal_section'"> <dc:call-macro name="longitudinal-section-prototype"/> </dc:when> <dc:when test="$out = 'discharge_curve'"> <dc:call-macro name="mainvalues"/> </dc:when> <dc:when test="$out = 'duration_curve'"> <dc:call-macro name="mainvalues"/> <dc:call-macro name="basedata_2_fixations_relative_point"/> <dc:call-macro name="basedata_4_heightmarks-points-relative_points"/> <dc:call-macro name="basedata_5_flood-protections_relative_points"/> </dc:when> <dc:when test="$out = 'reference_curve'"> <dc:call-macro name="mainvalues"/> <dc:call-macro name="annotations"/> <dc:call-macro name="basedata_1_additionals-relative_point"/> <dc:call-macro name="basedata_2_fixations_relative_point"/> <dc:call-macro name="basedata_4_heightmarks-points-relative_points"/> <dc:call-macro name="basedata_5_flood-protections_relative_points"/> </dc:when> <dc:when test="$out = 'fix_wq_curve'"> <dc:call-macro name="basedata_0_wq"/> <dc:call-macro name="basedata_1_additionals_marks"/> <dc:call-macro name="basedata_2_fixations_wqkms"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="basedata_4_heightmarks-points"/> <dc:call-macro name="basedata_5_flood-protections_relative_points"/> <dc:call-macro name="discharge_table_gauge"/> <dc:call-macro name="discharge_fix_wq"/> </dc:when> <dc:when test="$out = 'fix_longitudinal_section_curve'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'map'"> <dc:call-macro name="flood-map-complete"/> </dc:when> <dc:when test="$out = 'flow_velocity'"> <dc:call-macro name="annotations_per_type"/> <dc:call-macro name="flow_velocity_measurements"/> </dc:when> <dc:when test="$out = 'bed_longitudinal_section'"> <dc:call-macro name="annotations_per_type"/> </dc:when> <dc:when test="$out = 'sedimentload_ls'"> <dc:call-macro name="annotations_per_type"/> <dc:call-macro name="morph_width"/> </dc:when> <dc:when test="$out = 'bedheight_middle'"> <dc:call-macro name="sounding-width"/> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_2_fixations"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="annotations_per_type"/> </dc:when> <dc:when test="$out = 'bed_difference_year'"> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_2_fixations"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="annotations_per_type"/> <dc:call-macro name="morph_width"/> </dc:when> <dc:when test="$out = 'bed_difference_epoch'"> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_2_fixations"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="annotations_per_type"/> <dc:call-macro name="morph_width"/> </dc:when> <dc:when test="$out = 'floodmap'"> <dc:choose> <dc:when test="dc:contains($parameters, 'dem')"> <dc:call-macro name="flood-map-dem"/> </dc:when> <dc:when test="dc:contains($parameters, 'hws')"> <hws> <dc:call-macro name="flood-map-hws-lines"/> <dc:call-macro name="flood-map-hws-points"/> </hws> </dc:when> <dc:otherwise> <dc:call-macro name="flood-map-complete"/> </dc:otherwise> </dc:choose> </dc:when> <dc:when test="$out = 'floodmap-hws'"> <dc:choose> <dc:when test="dc:contains($parameters, 'dem')"> <dc:call-macro name="flood-map-dem"/> </dc:when> <dc:when test="dc:contains($parameters, 'hws')"> <hws> <dc:call-macro name="flood-map-hws-lines"/> <dc:call-macro name="flood-map-hws-points"/> </hws> </dc:when> <dc:otherwise> <dc:call-macro name="flood-map-complete"/> </dc:otherwise> </dc:choose> </dc:when> <dc:when test="$out = 'computed_discharge_curve'"> <dc:call-macro name="discharge_computed"/> <dc:call-macro name="basedata_2_fixations_wqkms"/> <dc:call-macro name="basedata_5_flood-protections"/> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_4_heightmarks-points"/> <computed_discharge_curve> <dc:call-macro name="mainvalues"/> </computed_discharge_curve> </dc:when> <dc:when test="$out = 'minfo-heights'"> <dc:call-macro name="minfo-heights"/> <dc:macro name="minfo-heights"> <bedheights> <dc:call-macro name="bed-heights-single"/> <dc:call-macro name="bed-heights-epoch"/> </bedheights> </dc:macro> </dc:when> <dc:when test="$out = 'minfo-heights-epoch'"> <bedheights> <dc:call-macro name="bed-heights-epoch"/> </bedheights> </dc:when> <dc:when test="$out = 'waterlevels'"> <dc:if test="$current-state-id != 'state.winfo.uesk.wsp'"> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_2_fixations"/> <dc:call-macro name="basedata_4_heightmarks-points"/> <dc:call-macro name="basedata_5_flood-protections"/> </dc:if> </dc:when> </dc:choose> </dc:iterate> </dc:otherwise> </dc:choose> </dc:call-macro> </dc:call-macro> </dc:macro> <dc:macro name="generate-user-content"> <dc:call-macro name="user-range"> <dc:call-macro name="all-user-artifacts"> <dc:call-macro name="km-filtered-user-artifacts"> <dc:choose> <dc:when test="dc:contains($parameters, 'recommended')"> <dc:comment> Recommendations (user) </dc:comment> <dc:iterate var="out" container="artifact-outs"> <dc:choose> <dc:when test="$out = 'longitudinal_section'"> <dc:call-macro name="officiallines_user"/> </dc:when> </dc:choose> </dc:iterate> </dc:when> <dc:otherwise> <dc:comment> Non Recommendations (user) </dc:comment> <dc:iterate var="out" container="artifact-outs"> <dc:choose> <dc:when test="$out = 'longitudinal_section'"> <dc:call-macro name="longitudinal"/> <dc:call-macro name="differences"/> </dc:when> <dc:when test="$out = 'discharge_longitudinal_section'"> <dc:call-macro name="longitudinal"/> <dc:call-macro name="differences"/> </dc:when> <dc:when test="$out = 'w_differences'"> <dc:call-macro name="longitudinal"/> <dc:call-macro name="differences"/> </dc:when> <dc:when test="$out = 'fix_deltawt_curve'"> <dc:call-macro name="delta-wt"/> </dc:when> <dc:when test="$out = 'reference_curve'"> <dc:call-macro name="reference-curves"/> </dc:when> <dc:when test="$out = 'computed_discharge_curve'"> <dc:call-macro name="computed-discharge-curve"/> </dc:when> <dc:when test="$out = 'cross_section'"> <dc:call-macro name="waterlevels"/> </dc:when> <dc:when test="$out = 'fix_longitudinal_section_curve'"> <dc:call-macro name="longitudinal-section"/> </dc:when> <dc:when test="$out = 'fix_derivate_curve'"> <dc:call-macro name="fix-derivate-curve"/> </dc:when> <dc:when test="$out = 'fix_wq_curve'"> <dc:call-macro name="fix-wq-curve"/> </dc:when> <dc:when test="$out = 'duration_curve'"> <dc:call-macro name="duration-curve"/> </dc:when> <dc:when test="$out = 'waterlevels'"> <dc:call-macro name="waterlevels-fix"/> </dc:when> <dc:when test="$out = 'fix_wq_curve'"> <dc:call-macro name="waterlevels-fix"/> </dc:when> <dc:when test="$out = 'floodmap'"> <dc:call-macro name="flood-map"/> </dc:when> <dc:when test="$out = 'map'"> <dc:call-macro name="flood-map"/> </dc:when> <dc:when test="$out = 'bedheight_middle'"> <dc:call-macro name="waterlevels-discharge"/> <dc:call-macro name="waterlevels-fix"/> </dc:when> <dc:when test="$out = 'floodmap-hws'"> <dc:call-macro name="floodmap-hws-user"/> </dc:when> <dc:when test="$out = 'flow_velocity'"> <dc:call-macro name="bedquality-bed"/> <dc:call-macro name="bedquality-load"/> </dc:when> <dc:when test="$out = 'bed_longitudinal_section'"> <dc:call-macro name="bedquality-bed"/> <dc:call-macro name="bedquality-load"/> <dc:call-macro name="bedquality-density"/> <dc:call-macro name="bedquality-porosity"/> </dc:when> <dc:when test="$out = 'sedimentload_ls'"> <dc:call-macro name="differences"/> <dc:call-macro name="bedheight-differences"/> <dc:call-macro name="flow-velocity"/> <dc:call-macro name="sediment-load"/> </dc:when> <dc:when test="$out = 'bed_difference_year'"> <dc:call-macro name="waterlevels-discharge"/> <dc:call-macro name="bedheight-differences"/> <dc:call-macro name="differences"/> <dc:call-macro name="waterlevels-fix"/> <dc:call-macro name="delta-wt-ls"/> </dc:when> <dc:when test="$out = 'bed_difference_epoch'"> <dc:call-macro name="waterlevels-discharge"/> <dc:call-macro name="bedheight-differences"/> <dc:call-macro name="differences"/> <dc:call-macro name="waterlevels-fix"/> <dc:call-macro name="delta-wt-ls"/> </dc:when> </dc:choose> </dc:iterate> </dc:otherwise> </dc:choose> </dc:call-macro> </dc:call-macro> </dc:call-macro> </dc:macro> <!-- Macros to load user data --> <dc:macro name="differences"> <dc:filter expr="$facet_name = 'w_differences'"> <dc:if test="dc:has-result()"> <differences> <dc:for-each> <w_differences description="{$facet_description}" factory="winfo" artifact-id="{$aid}" ids="{$aid}" out="w_differences"/> </dc:for-each> </differences> </dc:if> </dc:filter> </dc:macro> <dc:macro name="reference-curves"> <dc:variable name="facet_type" value="reference_curve"/> <dc:call-macro name="select-facets"> <reference_curves> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="ids" value="${aid}"/> <dc:attribute name="out" value="reference_curve"/> </dc:element> </dc:for-each> </reference_curves> </dc:call-macro> </dc:macro> <dc:macro name="computed-discharge-curve"> <dc:variable name="facet_type" value="computed_discharge_curve.q"/> <dc:call-macro name="select-facets"> <computed_discharge_curves> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="ids" value="${aid}"/> <dc:attribute name="out" value="computed_discharge_curve"/> </dc:element> </dc:for-each> </computed_discharge_curves> </dc:call-macro> </dc:macro> <dc:macro name="flood-map"> <dc:variable name="facet_type" value="floodmap.wsplgen"/> <dc:call-macro name="select-facets"> <floodmap> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="ids" value="${aid}"/> <dc:attribute name="out" value="floodmap"/> </dc:element> </dc:for-each> </floodmap> </dc:call-macro> </dc:macro> <dc:macro name="waterlevels"> <dc:filter expr="$out_name = 'cross_section'"> <dc:if test="dc:has-result()"> <waterlevels> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} ORDER BY num ASC, name DESC </dc:statement> <longitudinal_section_columns description="{$river} {$a_creation}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="cross_section"/> </dc:element> </dc:for-each> </longitudinal_section_columns> </dc:context> </dc:for-each> </waterlevels> </dc:if> </dc:filter> </dc:macro> <dc:macro name="longitudinal"> <dc:filter expr="$out_name = 'longitudinal_section'"> <dc:if test="dc:has-result()"> <waterlevels> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} ORDER BY num ASC, name DESC </dc:statement> <longitudinal_section_columns description="{$river} {$a_creation}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="longitudinal_section"/> </dc:element> </dc:for-each> </longitudinal_section_columns> </dc:context> </dc:for-each> </waterlevels> </dc:if> </dc:filter> </dc:macro> <dc:macro name="longitudinal-section"> <dc:filter expr="$out_name = 'fix_longitudinal_section_curve'"> <dc:if test="dc:has-result()"> <waterlevels> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} AND ( name LIKE 'fix_deviation_ls%' OR name LIKE 'fix_sector_average_ls%' OR name LIKE 'fix_analysis_events_ls%' OR name LIKE 'fix_reference_events_ls%') ORDER BY num ASC, name DESC </dc:statement> <waterlevels description="{$river} {$a_creation} {$collection_name}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="fixanalysis"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="fix_longitudinal_section_curve"/> </dc:element> </dc:for-each> </waterlevels> </dc:context> </dc:for-each> </waterlevels> </dc:if> </dc:filter> </dc:macro> <dc:macro name="delta-wt"> <dc:filter expr="$out_name = 'fix_deltawt_curve'"> <dc:if test="dc:has-result()"> <waterlevels> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} and ( name LIKE 'fix_sector_average_dwt%' OR name LIKE 'fix_deviation_dwt%' OR name = 'fix_analysis_events_dwt' OR name = 'fix_reference_events_dwt' OR name = 'fix_analysis_periods_dwt') ORDER BY num ASC, name DESC </dc:statement> <waterlevels description="{$river} {$a_creation} {$collection_name}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="fixanalysis"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="fix_deltawt_curve"/> </dc:element> </dc:for-each> </waterlevels> </dc:context> </dc:for-each> </waterlevels> </dc:if> </dc:filter> </dc:macro> <dc:macro name="delta-wt-ls"> <dc:filter expr="$out_name = 'fix_deltawt_curve'"> <dc:if test="dc:has-result()"> <waterlevels> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} and ( name LIKE 'fix_sector_average_dwt%' OR name LIKE 'fix_deviation_dwt%') ORDER BY num ASC, name DESC </dc:statement> <waterlevels description="{$river} {$a_creation} {$collection_name}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="fixanalysis"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="fix_deltawt_curve"/> </dc:element> </dc:for-each> </waterlevels> </dc:context> </dc:for-each> </waterlevels> </dc:if> </dc:filter> </dc:macro> <dc:macro name="fix-derivate-curve"> <dc:filter expr="$out_name = 'fix_derivate_curve'"> <dc:if test="dc:has-result()"> <waterlevels> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} and name = 'fix_derivate_curve' ORDER BY num ASC, name DESC </dc:statement> <waterlevels description="{$river} {$a_creation} {$collection_name}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="fixanalysis"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="fix_derivate_curve"/> </dc:element> </dc:for-each> </waterlevels> </dc:context> </dc:for-each> </waterlevels> </dc:if> </dc:filter> </dc:macro> <dc:macro name="fix-wq-curve"> <dc:filter expr="$out_name = 'fix_wq_curve'"> <dc:if test="dc:has-result()"> <waterlevels> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} and ( name LIKE 'fix_sector_average_wq%' OR name = 'fix_wq_curve' OR name LIKE 'fix_analysis_events_wq%' OR name LIKE 'fix_reference_events_wq%' ) ORDER BY num ASC, name DESC </dc:statement> <waterlevels description="{$river} {$a_creation} {$collection_name}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="fixanalysis"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="fix_wq_curve"/> </dc:element> </dc:for-each> </waterlevels> </dc:context> </dc:for-each> </waterlevels> </dc:if> </dc:filter> </dc:macro> <dc:macro name="duration-curve"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE (f.name = 'duration_curve.q' OR f.name = 'duration_curve.w') AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:if test="dc:has-result()"> <computed_discharge_curves> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="ids" value="${aid}"/> <dc:attribute name="out" value="duration_curve"/> </dc:element> </dc:for-each> </computed_discharge_curves> </dc:if> </dc:context> </dc:macro> <dc:comment>TODO doesnt work nicely for fix/wq-diags.</dc:comment> <dc:macro name="waterlevels-fix"> <dc:filter expr="$out_name = 'longitudinal_section'"> <waterlevels> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} and name = 'longitudinal_section.w' ORDER BY num ASC, name DESC </dc:statement> <waterlevels description="{$river} {$a_creation} {$collection_name}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="longitudinal_section"/> </dc:element> </dc:for-each> </waterlevels> </dc:context> </dc:for-each> </waterlevels> </dc:filter> </dc:macro> <dc:macro name="floodmap-hws-user"> <dc:filter expr="$out_name = 'floodmap'"> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} AND name = 'floodmap.usershape' ORDER BY num ASC, name DESC </dc:statement> <own-hws> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="floodmap"/> </dc:element> </dc:for-each> </own-hws> </dc:context> </dc:for-each> </dc:filter> </dc:macro> <dc:macro name="bedquality-bed"> <dc:filter expr="$out_name = 'bed_longitudinal_section'"> <dc:if test="dc:has-result()"> <bed_quality_bed> <dc:for-each> <quality-bed description="{$river} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE (f.name = 'bed_longitudinal_section.bed_diameter_toplayer' OR f.name = 'bed_longitudinal_section.bed_diameter_sublayer') AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="out" value="bed_longitudinal_section"/> </dc:element> </dc:for-each> </dc:context> </quality-bed> </dc:for-each> </bed_quality_bed> </dc:if> </dc:filter> </dc:macro> <dc:macro name="bedquality-load"> <dc:filter expr="$out_name = 'bed_longitudinal_section'"> <dc:if test="dc:has-result()"> <bed_quality_load> <dc:for-each> <quality-load description="{$river} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE f.name = 'bed_longitudinal_section.bedload_diameter' AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="out" value="bed_longitudinal_section"/> </dc:element> </dc:for-each> </dc:context> </quality-load> </dc:for-each> </bed_quality_load> </dc:if> </dc:filter> </dc:macro> <dc:macro name="bedquality-density"> <dc:filter expr="$out_name = 'bed_longitudinal_section'"> <dc:if test="dc:has-result()"> <bed_quality_density> <dc:for-each> <density description="{$river} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE (f.name = 'bed_longitudinal_section.sediment_density_toplayer' OR f.name = 'bed_longitudinal_section.sediment_density_sublayer') AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="out" value="bed_longitudinal_section"/> </dc:element> </dc:for-each> </dc:context> </density> </dc:for-each> </bed_quality_density> </dc:if> </dc:filter> </dc:macro> <dc:macro name="bedquality-porosity"> <dc:filter expr="$out_name = 'bed_longitudinal_section'"> <dc:if test="dc:has-result()"> <bed_quality_porosity> <dc:for-each> <porosity description="{$river} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE (f.name = 'bed_longitudinal_section.porosity_toplayer' OR f.name = 'bed_longitudinal_section.porosity_sublayer') AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="out" value="bed_longitudinal_section"/> </dc:element> </dc:for-each> </dc:context> </porosity> </dc:for-each> </bed_quality_porosity> </dc:if> </dc:filter> </dc:macro> <dc:macro name="flow-velocity"> <dc:filter expr="$out_name = 'flow_velocity'"> <dc:if test="dc:has-result()"> <flow-velocity> <dc:for-each> <flow description="{$river} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE (f.name = 'flow_velocity.totalchannel' OR f.name = 'flow_velocity.mainchannel' OR f.name = 'flow_velocity.totalchannel.filtered' OR f.name = 'flow_velocity.mainchannel.filtered') AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="out" value="flow_velocity"/> </dc:element> </dc:for-each> </dc:context> </flow> </dc:for-each> </flow-velocity> </dc:if> </dc:filter> </dc:macro> <dc:macro name="sediment-load"> <dc:filter expr="$out_name = 'sedimentload_ls'"> <dc:if test="dc:has-result()"> <sediment-load> <dc:for-each> <load description="{$river} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE f.name LIKE 'sedimentload%' AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="out" value="sedimentload_ls"/> </dc:element> </dc:for-each> </dc:context> </load> </dc:for-each> </sediment-load> </dc:if> </dc:filter> </dc:macro> <dc:macro name="bedheight-differences"> <dc:filter expr="$out_name = 'bed_difference_year' or $out_name = 'bed_difference_epoch'"> <dc:if test="dc:has-result()"> <bedheight-differences> <dc:for-each> <difference description="{$river} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE (f.name LIKE 'bedheight_difference.year%' OR f.name LIKE 'bedheight_difference.epoch%') AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:choose> <dc:when test="dc:contains($o_name, 'bed_difference_year')"> <dc:attribute name="out" value="bed_difference_year"/> </dc:when> <dc:otherwise> <dc:attribute name="out" value="bed_difference_epoch"/> </dc:otherwise> </dc:choose> </dc:element> </dc:for-each> </dc:context> </difference> </dc:for-each> </bedheight-differences> </dc:if> </dc:filter> </dc:macro> <dc:macro name="waterlevels-discharge"> <dc:filter expr="$out_name = 'discharge_longitudinal_section'"> <dc:if test="dc:has-result()"> <waterlevels-discharge> <dc:for-each> <discharge description="{$oid} {$river} {$a_id} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE f.name = 'discharge_longitudinal_section.w' AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="out" value="longitudinal_section"/> </dc:element> </dc:for-each> </dc:context> </discharge> </dc:for-each> </waterlevels-discharge> </dc:if> </dc:filter> </dc:macro> <!-- Macros to load system data --> <dc:macro name="annotations"> <annotation factory="annotations" ids="{$river_id}"/> </dc:macro> <dc:macro name="mainvalues"> <wmainvalue factory="mainvalue" ids="{$river_id}:w"/> <qmainvalue factory="mainvalue" ids="{$river_id}:q"/> </dc:macro> <dc:macro name="cross_sections"> <cross_sections id="flood-protections-{$river_id}"> <dc:context connection="system"> <dc:statement> SELECT DISTINCT cs.id AS prot_id, cs.description AS prot_description FROM cross_sections cs JOIN cross_section_lines csl ON csl.cross_section_id = cs.id WHERE cs.river_id = ${river_id} AND csl.km BETWEEN ${fromkm} AND ${tokm} </dc:statement> <dc:for-each> <cross_section name="{$prot_description}" ids="{$prot_id}" factory="crosssections"/> </dc:for-each> </dc:context> </cross_sections> </dc:macro> <dc:macro name="hyks"> <hyks id="hyk-{$river_id}"> <dc:context connection="system"> <dc:statement> SELECT DISTINCT h.id AS hyk_id, h.description AS hyk_description FROM hyks h JOIN hyk_entries he ON he.hyk_id = h.id WHERE river_id = ${river_id} AND he.km BETWEEN ${fromkm} AND ${tokm} </dc:statement> <dc:for-each> <hyk name="{$hyk_description}" ids="{$hyk_id}" factory="hyk"/> </dc:for-each> </dc:context> </hyks> </dc:macro> <dc:macro name="fixings-macro"> <dc:filter expr="$kind=2"> <dc:if test="dc:has-result()"> <fixations> <dc:group expr="dc:replace($wst_description, 'Fixierungen/', '')"> <fixation name="{dc:group-key()}"> <dc:for-each> <dc:macro-body/> </dc:for-each> </fixation> </dc:group> </fixations> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_2_fixations_wqkms"> <dc:call-macro name="fixings-macro"> <column name="{$wst_column_name}" ids="fixations-wstv-{$wst_column_position}-{$wst_id}" factory="wqinterpol" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:call-macro> </dc:macro> <dc:macro name="basedata_2_fixations"> <dc:call-macro name="fixings-macro"> <column name="{$wst_column_name}" ids="fixations-wstv-{$wst_column_position}-{$wst_id}" factory="staticwqkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:call-macro> </dc:macro> <dc:macro name="basedata_3_officials"> <dc:filter expr="$kind=3"> <dc:if test="dc:has-result()"> <officiallines> <dc:group expr="$wst_description"> <official name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="additionals-wstv-{$wst_column_position}-{$wst_id}" factory="staticwqkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </official> </dc:group> </officiallines> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_4_heightmarks-points"> <dc:filter expr="$kind=4"> <dc:if test="dc:has-result()"> <heightmarks> <dc:group expr="dc:replace($wst_description, 'HW-Marken/', '')"> <heightmark name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="heightmarks_points-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </heightmark> </dc:group> </heightmarks> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_4_heightmarks-points-relative_points"> <dc:filter expr="$kind=4"> <dc:if test="dc:has-result()"> <heightmarks> <dc:group expr="dc:replace($wst_description, 'HW-Marken/', '')"> <relativepoint name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="heightmarks_points-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </relativepoint> </dc:group> </heightmarks> </dc:if> </dc:filter> </dc:macro> <dc:macro name="longitudinal-section-prototype"> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_2_fixations"/> <dc:call-macro name="basedata_4_heightmarks-points"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="basedata_5_flood-protections"/> <dc:call-macro name="annotations_per_type"/> </dc:macro> <dc:macro name="basedata_5_flood-protections"> <dc:filter expr="$kind=5"> <dc:if test="dc:has-result()"> <flood_protections> <dc:group expr="dc:replace($wst_description, 'HW-Schutzanlagen/', '')"> <flood_protection name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="flood_protection-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </flood_protection> </dc:group> </flood_protections> </dc:if> </dc:filter> </dc:macro> <dc:macro name="annotations_per_type"> <annotations> <dc:context> <all_annotations factory="annotations" ids="{$river_id}"/> <dc:statement> SELECT id AS anno_id, name AS anno_description FROM annotation_types </dc:statement> <dc:for-each> <annotation name="{$anno_description}" factory="annotations" ids="{$river_id}:{$anno_description}"/> </dc:for-each> </dc:context> </annotations> </dc:macro> <dc:macro name="basedata_2_fixations_relative_point"> <dc:filter expr="$kind=2"> <dc:if test="dc:has-result()"> <fixations> <dc:group expr="dc:replace($wst_description, 'Fixierungen/', '')"> <relativepoint name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="fixations-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </relativepoint> </dc:group> </fixations> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_5_flood-protections_relative_points"> <dc:filter expr="$kind=5"> <dc:if test="dc:has-result()"> <flood_protections> <dc:group expr="$wst_description"> <relativepoint name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="flood_protection-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </relativepoint> </dc:group> </flood_protections> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_1_additionals-relative_point"> <dc:filter expr="$kind=1"> <dc:if test="dc:has-result()"> <additionals> <dc:group expr="$wst_description"> <relativepoint name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="additionals-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </relativepoint> </dc:group> </additionals> </dc:if> </dc:filter> </dc:macro> <dc:macro name="discharge_table_gauge"> <dc:context> <dc:statement> SELECT id AS gauge_id, name AS gauge_name FROM gauges WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <discharge_table_nn> <discharge_table_gauge> <dc:for-each> <gauge name="{$gauge_name}" factory="gaugedischarge" from="{$g_start}" to="{$g_stop}" ids="{$gauge_name}"/> </dc:for-each> </discharge_table_gauge> </discharge_table_nn> </dc:if> </dc:context> </dc:macro> <dc:comment>TODO: Why is this just a copy of the discharge_table_gauge?</dc:comment> <dc:macro name="discharge_computed"> <dc:call-macro name="discharge_table_gauge"/> </dc:macro> <dc:comment>TODO: Why is this just a copy of the discharge_table_gauge?</dc:comment> <dc:macro name="discharge_fix_wq"> <dc:call-macro name="discharge_table_gauge"/> </dc:macro> <dc:macro name="qsectors"> <qsector factory="qsectors" ids="{$river_id}"/> </dc:macro> <dc:macro name="flood-map-recommended"> <kilometrage> <riveraxis factory="riveraxis" ids="{$river_id}"/> </kilometrage> <rastermap> <background factory="wmsbackground" ids="{$river_id}"/> </rastermap> </dc:macro> <dc:macro name="minfo-heights"> <bedheights> <dc:call-macro name="bed-heights-single"/> <dc:call-macro name="bed-heights-epoch"/> </bedheights> </dc:macro> <dc:macro name="bed-heights-single"> <single> <dc:context> <dc:statement> SELECT id AS bedh_id, year AS bedh_year, description AS bedh_descr FROM bed_height_single WHERE river_id = ${river_id} </dc:statement> <dc:for-each> <height factory="bedheight" ids="bedheight-single-{$bedh_id}-{$bedh_year}" description="{$bedh_descr}"/> </dc:for-each> </dc:context> </single> </dc:macro> <dc:macro name="bed-heights-epoch"> <epoch> <dc:context> <dc:statement> SELECT id AS bedh_id, time_interval_id AS bedh_interval_id, description AS bedh_descr FROM bed_height_epoch WHERE river_id = ${river_id} </dc:statement> <dc:for-each> <height factory="bedheight" ids="bedheight-epoch-{$bedh_id}-{$bedh_interval_id}" description="{$bedh_descr}"/> </dc:for-each> </dc:context> </epoch> </dc:macro> <dc:macro name="flow_velocity_measurements"> <dc:context> <dc:statement> SELECT id AS fvmid, description AS fvmd FROM flow_velocity_measurements WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <flowvelocitymeasurement> <dc:for-each> <dc:comment>TODO: Why has this an id and factory?</dc:comment> <flow_velocity_measurement name="{$fvmd}" ids="{$fvmid}" factory="flowvelocity"> <dc:context> <dc:statement> SELECT id, description, station, datetime, v, w, q FROM flow_velocity_measure_values WHERE measurements_id = ${fvmid} AND station BETWEEN ${fromkm} AND ${tokm} </dc:statement> <dc:for-each> <measurement_value name="{$description} - {$station} - {$datetime}" ids="{$id}" factory="flowvelocity"/> </dc:for-each> </dc:context> </flow_velocity_measurement> </dc:for-each> </flowvelocitymeasurement> </dc:if> </dc:context> </dc:macro> <dc:macro name="morph_width"> <dc:context> <dc:statement> SELECT id AS width_id FROM morphologic_width WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <morph_width> <dc:for-each> <dc:context> <dc:statement> SELECT min(station) AS from_station, max(station) AS to_station FROM morphologic_width_values WHERE morphologic_width_id = ${width_id} </dc:statement> <dc:for-each> <morphologic-width name="{$from_station} - {$to_station}" ids="{$width_id}" factory="morph-width"/> </dc:for-each> </dc:context> </dc:for-each> </morph_width> </dc:if> </dc:context> </dc:macro> <dc:macro name="sounding-width"> <dc:context> <dc:statement> SELECT id AS bedh_id, year AS bedh_year, description AS bedh_descr FROM bed_height_single WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <soundings_width> <dc:for-each> <height factory="bedheight" ids="bedheight-singlevalues-{$bedh_id}-{$bedh_year}" description="{$bedh_descr}"/> </dc:for-each> </soundings_width> </dc:if> </dc:context> </dc:macro> <dc:macro name="basedata_0_macro"> <dc:filter expr="$kind = 0"> <dc:if test="dc:has-result()"> <basedata> <dc:group expr="$wst_description"> <basedata name="{dc:group-key()}"> <dc:for-each> <dc:macro-body/> </dc:for-each> </basedata> </dc:group> </basedata> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_0"> <dc:call-macro name="basedata_0_macro"> <column name="{$wst_column_name}" ids="base_data-wstv-{$wst_column_position}-{$wst_id}" factory="staticwqkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:call-macro> </dc:macro> <dc:macro name="basedata_0_wq"> <dc:call-macro name="basedata_0_macro"> <column name="{$wst_column_name}" ids="base_data-wstv-{$wst_column_position}-{$wst_id}" factory="wqinterpol" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:call-macro> </dc:macro> <dc:macro name="basedata_1_additionals_macro"> <dc:filter expr="$kind=1"> <dc:if test="dc:has-result()"> <additionals> <dc:group expr="dc:replace($wst_description, 'Zus.Längsschnitte/', '')"> <additional name="{dc:group-key()}"> <dc:for-each> <dc:macro-body/> </dc:for-each> </additional> </dc:group> </additionals> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_1_additionals"> <dc:call-macro name="basedata_1_additionals_macro"> <column name="{$wst_column_name}" ids="additionals-wstv-{$wst_column_position}-{$wst_id}" factory="staticwqkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:call-macro> </dc:macro> <dc:macro name="basedata_1_additionals_marks"> <dc:call-macro name="basedata_1_additionals_macro"> <column name="{$wst_column_name}" ids="additionalsmarks-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:call-macro> </dc:macro> <!-- Floodmap part --> <dc:macro name="flood-map-complete"> <dc:call-macro name="flood-map-buildings"/> <dc:call-macro name="catchments"/> <dc:call-macro name="floodmarks"/> <hws> <dc:call-macro name="hwslines"/> <dc:call-macro name="hwspoints"/> </hws> <dc:call-macro name="flood-map-routing"/> <hydrboundaries> <dc:call-macro name="flood-map-floodplain"/> <dc:call-macro name="flood-map-hydr-boundaries"/> </hydrboundaries> <dc:call-macro name="flood-map-uesk"/> </dc:macro> <dc:macro name="flood-map-routing"> <route_data> <dc:call-macro name="flood-map-qps"/> <dc:call-macro name="flood-map-fixpoints"/> <dc:call-macro name="flood-map-km"/> <dc:call-macro name="flood-map-riveraxis"/> </route_data> </dc:macro> <dc:macro name="flood-map-hydr-boundaries"> <bfg_model> <dc:call-macro name="flood-map-hydr-boundaries-poly"/> <dc:call-macro name="flood-map-hydr-boundaries-lines"/> </bfg_model> <dc:call-macro name="flood-map-hydr-boundaries-state"/> </dc:macro> <dc:macro name="flood-map-recommended"> <dc:comment> FIXME: Following two macros look identical to me. </dc:comment> <kilometrage> <riveraxis factory="riveraxis" ids="{$river_id}"/> </kilometrage> <rastermap> <background factory="wmsbackground" ids="{$river_id}"/> </rastermap> </dc:macro> <dc:macro name="flood-map-dem"> <dems> <dc:context> <dc:statement> SELECT d.id AS dem_id, r.a AS dem_lower, r.b AS dem_upper, d.name AS name, t.start_time AS start_time, t.stop_time AS stop_time, 'Projektion: ' || d.projection || '$' || 'Rasterweite: ' || d.resolution || 'm$' || 'Format: ' || d.format || '$' || 'Zeitraum: ' AS info FROM dem d JOIN ranges r ON d.range_id = r.id LEFT JOIN time_intervals t ON d.time_interval_id = t.id WHERE d.river_id = ${river_id} </dc:statement> <dc:for-each> <dem factory="demfactory" ids="{$dem_id}" name="{$name}" info="{dc:replace($info, '$', '<BR>')}{dc:date-format('yyyy', $start_time)} - {dc:date-format('yyyy', $stop_time)}"/> </dc:for-each> </dc:context> </dems> </dc:macro> <dc:macro name="filter_hws_ddg"> <dc:macro name="durchlass_damm_graben"> <dc:macro name="ddg_factory"> <dc:for-each> <hws factory="hwsfactory" name="{$hws_name}"/> </dc:for-each> </dc:macro> <dc:filter expr="$hws_kind=1"> <dc:if test="dc:has-result()"> <Durchlass><dc:call-macro name="ddg_factory"/></Durchlass> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=2"> <dc:if test="dc:has-result()"> <Damm><dc:call-macro name="ddg_factory"/></Damm> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=3"> <dc:if test="dc:has-result()"> <Graben><dc:call-macro name="ddg_factory"/></Graben> </dc:if> </dc:filter> </dc:macro> <dc:filter expr="$hws_official=1"> <dc:if test="dc:has-result()"> <official> <dc:call-macro name="durchlass_damm_graben"/> </official> </dc:if> </dc:filter> <dc:filter expr="$hws_official=0"> <dc:if test="dc:has-result()"> <inofficial> <dc:call-macro name="durchlass_damm_graben"/> </inofficial> </dc:if> </dc:filter> </dc:macro> <dc:macro name="flood-map-hws-lines"> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, official AS hws_official, kind_id AS hws_kind FROM hws_lines WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <lines> <dc:call-macro name="filter_hws_ddg"/> </lines> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-hws-points"> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, official AS hws_official, kind_id AS hws_kind FROM hws_points WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <points> <dc:call-macro name="filter_hws_ddg"/> </points> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-hydr-boundaries-state"> <federal> <dc:context> <dc:statement> SELECT DISTINCT name FROM hydr_boundaries WHERE river_id = ${river_id} AND kind = 2 </dc:statement> <dc:for-each> <line factory="wmshydrboundariesfactory" ids="{$river_id};{$name};2" name="{$name}"/> </dc:for-each> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT name FROM hydr_boundaries_poly WHERE river_id = ${river_id} AND kind = 2 </dc:statement> <dc:for-each> <line factory="wmshydrboundariespolyfactory" ids="{$river_id};{$name};2" name="{$name}"/> </dc:for-each> </dc:context> </federal> </dc:macro> <dc:macro name="flood-map-hydr-boundaries-lines"> <dc:context> <dc:statement> SELECT DISTINCT name FROM hydr_boundaries WHERE river_id = ${river_id} AND kind = 1 </dc:statement> <dc:comment> What about all other line kinds?</dc:comment> <dc:if test="dc:has-result()"> <lines> <dc:for-each> <line factory="wmshydrboundariesfactory" ids="{$river_id};{$name};1" name="{$name}"/> </dc:for-each> </lines> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-hydr-boundaries-poly"> <areas> <dc:context> <dc:statement> SELECT DISTINCT b.sectie AS sectie_id, sk.name AS sectie FROM hydr_boundaries_poly b JOIN sectie_kinds sk ON b.sectie = sk.id WHERE b.river_id = ${river_id} AND b.kind = 1 </dc:statement> <dc:if test="dc:has-result()"> <sobek_areas> <dc:for-each> <boundary name="{$sectie}" factory="wmshydrboundariespolyfactory" ids="{$river_id};{$sectie};1;{$sectie_id};-1"/> </dc:for-each> </sobek_areas> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT b.sobek AS sobek_id, sk.name AS sobek FROM hydr_boundaries_poly b JOIN sobek_kinds sk ON b.sobek = sk.id WHERE b.river_id = ${river_id} AND b.kind = 1 </dc:statement> <dc:if test="dc:has-result()"> <sobek_flooded> <dc:for-each> <boundary name="{$sobek}" factory="wmshydrboundariespolyfactory" ids="{$river_id};{$sobek};1;-1;{$sobek_id}"/> </dc:for-each> </sobek_flooded> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT b.name AS name FROM hydr_boundaries_poly b WHERE b.river_id = ${river_id} AND b.kind = 1 AND b.sobek IS NULL AND b.sectie is NULL </dc:statement> <dc:for-each> <boundary name="{$name}" factory="wmshydrboundariespolyfactory" ids="{$river_id};{$name}"/> </dc:for-each> </dc:context> </areas> </dc:macro> <dc:macro name="flood-map-uesk"> <dc:context> <dc:statement> SELECT DISTINCT 1 FROM floodmaps WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <uesk> <calculations> <dc:context> <dc:statement> SELECT DISTINCT 1 FROM floodmaps WHERE river_id = ${river_id} AND (kind = 112 OR kind = 111) </dc:statement> <dc:if test="dc:has-result()"> <current> <dc:context> <dc:statement> SELECT DISTINCT name AS name FROM floodmaps WHERE river_id = ${river_id} AND kind = 111 </dc:statement> <dc:if test="dc:has-result()"> <bfg> <dc:for-each> <floodmaps factory="wmsfloodmapsfactory" ids="{$river_id};{$name}" name="{$name}"/> </dc:for-each> </bfg> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT name AS name FROM floodmaps WHERE river_id = ${river_id} AND kind = 112 </dc:statement> <dc:if test="dc:has-result()"> <federal> <dc:for-each> <floodmaps factory="wmsfloodmapsfactory" ids="{$river_id};{$name}" name="{$name}"/> </dc:for-each> </federal> </dc:if> </dc:context> </current> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT 1 from floodmaps where river_id = ${river_id} AND (kind = 122 OR kind = 121) </dc:statement> <dc:if test="dc:has-result()"> <potential> <dc:context> <dc:statement> SELECT DISTINCT name AS name FROM floodmaps WHERE river_id = ${river_id} AND kind = 121 </dc:statement> <dc:if test="dc:has-result()"> <bfg> <dc:for-each> <floodmaps factory="wmsfloodmapsfactory" ids="{$river_id};{$name}" name="{$name}"/> </dc:for-each> </bfg> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT name AS name FROM floodmaps WHERE river_id = ${river_id} AND kind = 122 </dc:statement> <dc:if test="dc:has-result()"> <federal> <dc:for-each> <floodmaps factory="wmsfloodmapsfactory" ids="{$river_id};{$name}" name="{$name}"/> </dc:for-each> </federal> </dc:if> </dc:context> </potential> </dc:if> </dc:context> </calculations> <dc:context> <dc:statement> SELECT DISTINCT source AS source FROM floodmaps WHERE river_id = ${river_id} AND kind = 200 </dc:statement> <dc:if test="dc:has-result()"> <measurements> <dc:for-each> <year name="{$source}"> <dc:context> <dc:statement> SELECT DISTINCT name AS name FROM floodmaps WHERE river_id = ${river_id} AND kind = 200 AND source = ${source} </dc:statement> <dc:for-each> <floodmaps factory="wmsfloodmapsfactory" ids="{$river_id};{$name}" name="{$name}"/> </dc:for-each> </dc:context> </year> </dc:for-each> </measurements> </dc:if> </dc:context> </uesk> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-floodplain"> <dc:context> <dc:statement> SELECT DISTINCT fp.kind_id AS kind_id, flk.name AS kind_name FROM floodplain fp JOIN floodplain_kinds flk on fp.kind_id = flk.id WHERE river_id = ${river_id} AND kind_id=1 </dc:statement> <dc:if test="dc:has-result()"> <floodplain> <dc:filter expr="$kind_id=1"> <dc:for-each> <floody factory="wmsfloodplainfactory" description="{$kind_name}" ids="{$river_id};{$kind_name};{$kind_id}"/> </dc:for-each> </dc:filter> <dc:filter expr="$kind_id != 1"> <dc:if test="dc:has-result()"> <other> <dc:for-each> <floody factory="wmsfloodplainfactory" description="{$layer_name}" ids="{$river_id};{$layer_name};{$kind_id}"/> </dc:for-each> </other> </dc:if> </dc:filter> </floodplain> </dc:if> </dc:context> </dc:macro> <dc:macro name="hwspoints_by_kind"> <dc:comment> Call from a context where fed_name hws_kind hws_name and river_id is availble </dc:comment> <dc:macro name="hwspoints_by_kind_factory"> <dc:for-each> <hws factory="wmshwspointsfactory" ids="{$river_id};{$hws_name}" name="{$hws_name}"/> </dc:for-each> </dc:macro> <dc:filter expr="$hws_kind=1"> <dc:if test="dc:has-result()"> <Durchlass> <dc:call-macro name="hwspoints_by_kind_factory"/> </Durchlass> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=2"> <dc:if test="dc:has-result()"> <Damm> <dc:call-macro name="hwspoints_by_kind_factory"/> </Damm> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=3"> <dc:if test="dc:has-result()"> <Graben> <dc:call-macro name="hwspoints_by_kind_factory"/> </Graben> </dc:if> </dc:filter> </dc:macro> <dc:macro name="hwspoints"> <hws_points> <official> <dc:context> <dc:statement> SELECT DISTINCT fs.name AS fed_name, fs.id AS fed_id FROM hws_points hws JOIN fed_states fs ON hws.fed_state_id = fs.id WHERE river_id = ${river_id} AND hws.official=1 </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, kind_id AS hws_kind FROM hws_points WHERE river_id = ${river_id} AND official=1 AND fed_state_id = ${fed_id} ORDER BY name </dc:statement> <fedstate description="{$fed_name}"> <dc:call-macro name="hwspoints_by_kind"/> </fedstate> </dc:context> </dc:for-each> </dc:context> <dc:context> <dc:statement> SELECT distinct name AS hws_name, kind_id AS hws_kind FROM hws_points WHERE river_id = ${river_id} AND official=1 AND fed_state_id IS NULL ORDER BY name </dc:statement> <hws_fed_unknown> <dc:call-macro name="hwspoints_by_kind"/> </hws_fed_unknown> </dc:context> </official> <inofficial> <dc:context> <dc:statement> SELECT DISTINCT fs.name AS fed_name, fs.id AS fed_id FROM hws_points hws JOIN fed_states fs ON hws.fed_state_id = fs.id WHERE river_id = ${river_id} AND hws.official=0 </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, kind_id AS hws_kind FROM hws_points WHERE river_id = ${river_id} AND official=0 AND fed_state_id = ${fed_id} ORDER BY name </dc:statement> <fedstate description="{$fed_name}"> <dc:call-macro name="hwspoints_by_kind"/> </fedstate> </dc:context> </dc:for-each> </dc:context> <dc:context> <dc:statement> SELECT distinct name AS hws_name, kind_id AS hws_kind FROM hws_points WHERE river_id = ${river_id} AND official=0 AND fed_state_id IS NULL ORDER BY name </dc:statement> <hws_fed_unknown> <dc:call-macro name="hwspoints_by_kind"/> </hws_fed_unknown> </dc:context> </inofficial> </hws_points> </dc:macro> <dc:macro name="hwslines_by_kind"> <dc:comment> Call from a context where fed_name hws_kind hws_name and river_id is availble </dc:comment> <dc:macro name="hwslines_by_kind_factory"> <dc:for-each> <hws factory="wmshwslinesfactory" ids="{$river_id};{$hws_name}" name="{$hws_name}"/> </dc:for-each> </dc:macro> <dc:filter expr="$hws_kind=1"> <dc:if test="dc:has-result()"> <Durchlass> <dc:call-macro name="hwslines_by_kind_factory"/> </Durchlass> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=2"> <dc:if test="dc:has-result()"> <Damm> <dc:call-macro name="hwslines_by_kind_factory"/> </Damm> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=3"> <dc:if test="dc:has-result()"> <Graben> <dc:call-macro name="hwslines_by_kind_factory"/> </Graben> </dc:if> </dc:filter> </dc:macro> <dc:macro name="hwslines"> <hws_lines> <official> <dc:context> <dc:statement> SELECT DISTINCT fs.name AS fed_name, fs.id AS fed_id FROM hws_lines hws JOIN fed_states fs ON hws.fed_state_id = fs.id WHERE river_id = ${river_id} AND hws.official=1 </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, kind_id AS hws_kind FROM hws_lines WHERE river_id = ${river_id} AND official=1 AND fed_state_id = ${fed_id} ORDER BY name </dc:statement> <fedstate description="{$fed_name}"> <dc:call-macro name="hwslines_by_kind"/> </fedstate> </dc:context> </dc:for-each> </dc:context> <dc:context> <dc:statement> SELECT distinct name AS hws_name, kind_id AS hws_kind FROM hws_lines WHERE river_id = ${river_id} AND official=1 AND fed_state_id IS NULL ORDER BY name </dc:statement> <hws_fed_unknown> <dc:call-macro name="hwslines_by_kind"/> </hws_fed_unknown> </dc:context> </official> <inofficial> <dc:context> <dc:statement> SELECT DISTINCT fs.name AS fed_name, fs.id AS fed_id FROM hws_lines hws JOIN fed_states fs ON hws.fed_state_id = fs.id WHERE river_id = ${river_id} AND hws.official=0 </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, kind_id AS hws_kind FROM hws_lines WHERE river_id = ${river_id} AND official=0 AND fed_state_id = ${fed_id} ORDER BY name </dc:statement> <fedstate description="{$fed_name}"> <dc:call-macro name="hwslines_by_kind"/> </fedstate> </dc:context> </dc:for-each> </dc:context> <dc:context> <dc:statement> SELECT distinct name AS hws_name, kind_id AS hws_kind FROM hws_lines WHERE river_id = ${river_id} AND official=0 AND fed_state_id IS NULL ORDER BY name </dc:statement> <hws_fed_unknown> <dc:call-macro name="hwslines_by_kind"/> </hws_fed_unknown> </dc:context> </inofficial> </hws_lines> </dc:macro> <dc:macro name="floodmarks"> <dc:context> <dc:statement> SELECT DISTINCT COALESCE(CAST (year AS VARCHAR(64)), 'Unbekanntes Jahr') AS year FROM flood_marks WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <floodmarks> <dc:for-each> <floodmark name="{$year}" factory="wmsfloodmarkfactory" ids="{$river_id};{$year};{$year}"/> </dc:for-each> </floodmarks> </dc:if> </dc:context> </dc:macro> <dc:macro name="catchments"> <catchments> <catchment_wms factory="externalwmsfactory" ids="http://geoportal.bafg.de/wmsproxy/INSPIRE/DrainageBasin;HY.PHYSICALWATERS.CATCHMENTS;Einzugsgebiete (WMS)" /> <dc:call-macro name="flood-map-gaugelocations"/> </catchments> </dc:macro> <dc:macro name="flood-map-gaugelocations"> <gaugelocations> <gauge_points factory="externalwmsfactory" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;Pegelpunkte;Pegelpunkte (WSV)"/> <gauge_names factory="externalwmsfactory" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;Pegelnamen;Pegelnamen (WSV)"/> <gauge_level factory="externalwmsfactory" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;Pegelwasserstand;Aktueller Wasserstand (WSV)"/> <gauge_tendency factory="externalwmsfactory" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;TendenzWasserstand;Tendenz des Wasserstands (WSV)"/> </gaugelocations> </dc:macro> <dc:macro name="flood-map-riveraxis"> <dc:context> <dc:statement> SELECT DISTINCT ak.name AS kind_name, ax.kind_id AS kind_id, ax.name AS layer_name FROM river_axes ax JOIN axis_kinds ak on ax.kind_id = ak.id WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <axis> <dc:filter expr="$kind_id=1"> <dc:for-each> <actual description="{$kind_name}" ids="{$river_id};{$kind_name};{$kind_id}" factory="riveraxis"/> </dc:for-each> </dc:filter> <dc:filter expr="$kind_id!=1"> <other> <dc:for-each> <misc-axis description="{$layer_name}" ids="{$river_id};{$layer_name};{$kind_id}" factory="riveraxis"/> </dc:for-each> </other> </dc:filter> </axis> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-km"> <dc:context> <dc:statement> SELECT DISTINCT 1 FROM river_axes_km WHERE river_id = ${river_id} </dc:statement> <dc:for-each> <kilometrage factory="wmskmfactory" ids="{$river_id}"/> </dc:for-each> </dc:context> </dc:macro> <dc:macro name="flood-map-fixpoints"> <dc:context> <dc:statement> SELECT name AS name FROM fixpoints WHERE river_id = ${river_id} GROUP BY name </dc:statement> <dc:for-each> <fixpoints factory="wmsfixpointsfactory" ids="{$river_id};{$name}"/> </dc:for-each> </dc:context> </dc:macro> <dc:macro name="flood-map-qps"> <dc:context> <dc:statement> SELECT DISTINCT cs.kind_id AS kind_id, cs.name AS layer_name, ck.name AS kind_name FROM cross_section_tracks cs JOIN cross_section_track_kinds ck ON cs.kind_id = ck.id WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <qps> <dc:filter expr="$kind_id=1"> <dc:for-each> <actual description="{$kind_name}" factory="wmsqpsfactory" ids="{$river_id};{$kind_name};{$kind_id}"/> </dc:for-each> </dc:filter> <dc:filter expr="$kind_id = 0"> <dc:if test="dc:has-result()"> <other> <dc:for-each> <misc-qps description="{$layer_name}" factory="wmsqpsfactory" ids="{$river_id};{$layer_name};{$kind_id}"/> </dc:for-each> </other> </dc:if> </dc:filter> </qps> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-buildings"> <buildings> <dc:context> <dc:statement> SELECT DISTINCT b.name AS building_name, bk.name AS building_kind, b.kind_id AS building_kind_id FROM buildings b JOIN building_kinds bk ON b.kind_id = bk.id WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <dc:filter expr="$building_kind_id!=0"> <dc:for-each> <buildings description="{$building_kind}" factory="wmsbuildingsfactory" ids="{$river_id};{$building_kind};{$building_kind_id}"/> </dc:for-each> </dc:filter> <dc:filter expr="$building_kind_id=0"> <other> <dc:for-each> <buildings description="{$building_name}" factory="wmsbuildingsfactory" ids="{$river_id};{$building_name}"/> </dc:for-each> </other> </dc:filter> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT j.kind_id AS jetty_kind_id, jk.name AS jetty_kind FROM jetties j JOIN jetty_kinds jk ON j.kind_id = jk.id WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <jetties> <dc:for-each> <jetty description="{$jetty_kind}" factory="wmsjettiesfactory" ids="{$river_id};{$jetty_kind};{$jetty_kind_id}"/> </dc:for-each> </jetties> </dc:if> </dc:context> </buildings> </dc:macro> <dc:macro name="officiallines_user"> <dc:comment comment=".wst -------------------------------"/> <officiallines> <dc:for-each> <dc:context> <dc:statement> SELECT m.id AS a_id, m.state AS a_state, m.gid AS a_gid, m.creation AS a_creation, ardg.v AS gaugy, arv.v AS wqsingle FROM master_artifacts m, artifact_data ardg, artifact_data arv WHERE m.collection_id = ${collection_id} AND m.gid = CAST(${artifact-id} AS uuid) AND ardg.artifact_id = m.id AND ardg.k = 'ld_gaugename' AND arv.artifact_id = m.id AND arv.k = 'wq_single' AND EXISTS ( SELECT id FROM artifact_data ad WHERE ad.artifact_id = m.id AND k = 'river' AND v = ${river}) </dc:statement> <dc:for-each> <dc:context connection="system"> <dc:statement> SELECT ol.wst_id AS wstid, ol.wst_column_pos AS wstcolpos, ol.name AS olname, ol.value AS oval FROM official_q_values ol WHERE ol.value = CAST(${wqsingle} AS NUMERIC(10,2)) AND ol.gauge_name = ${gaugy} </dc:statement> <dc:for-each> <dc:element name="${olname}"> <dc:attribute name="name" value="${olname}"/> <dc:attribute name="ids" value="additionals-wstv-${wstcolpos}-${wstid}"/> <dc:attribute name="factory" value="staticwkms"/> <dc:attribute name="out" value="${out}"/> </dc:element> </dc:for-each> </dc:context> </dc:for-each> </dc:context> </dc:for-each> </officiallines> </dc:macro> <!-- Common stuff --> <dc:macro name="km-filtered-wsts"> <dc:context connection="system"> <dc:statement> SELECT w.kind AS kind, w.id AS wst_id, wc.id AS wst_column_id, wc.position AS wst_column_position, wc.description AS info, w.description AS wst_description, wc.name AS wst_column_name, wr.a AS deffrom, wr.b AS defto FROM wst_columns wc JOIN wsts w ON wc.wst_id = w.id JOIN wst_ranges wr ON wc.id = wr.wst_column_id WHERE w.river_id = ${river_id} AND NOT((${tokm} < wr.a) or (${fromkm} > wr.b)) </dc:statement> <dc:macro-body/> </dc:context> </dc:macro> <dc:macro name="all-user-artifacts"> <dc:context connection="user"> <dc:comment>Select collections and masterartifacts.</dc:comment> <dc:statement> SELECT c.name AS collection_name, ma.id AS a_id, ma.state AS a_state, ma.gid AS a_gid, ma.creation AS a_creation, COALESCE(ma.ld_mode, '') AS ld_m, COALESCE(ma.ld_locations, '') AS ld_l, COALESCE(ma.ld_from, '') AS ld_f, COALESCE(ma.ld_to, '') AS ld_t, o.name AS out_name, o.id AS out_id FROM users u JOIN collections c ON c.user_id = u.id JOIN master_artifacts_range ma ON ma.collection_id = c.id JOIN outs o ON o.artifact_id = ma.id WHERE u.gid = CAST(${user-id} AS UUID) AND ma.gid <> CAST(${artifact-id} AS uuid) AND EXISTS ( SELECT id FROM artifact_data ad WHERE ad.artifact_id = ma.id AND k = 'river' AND v = ${river}) </dc:statement> <dc:virtual-column name="deffrom" type="number" expr="dc:fromValue($ld_m, $ld_l, $ld_f)"> <dc:virtual-column name="defto" type="number" expr="dc:toValue($ld_m, $ld_l, $ld_t)"> <dc:macro-body/> </dc:virtual-column> </dc:virtual-column> </dc:context> </dc:macro> <dc:macro name="km-filtered-user-artifacts"> <dc:filter expr="not($deffrom > $tokm or $defto < $fromkm)"> <dc:macro-body/> </dc:filter> </dc:macro> <dc:macro name="user-range"> <dc:choose> <dc:when test="dc:contains($parameters, 'user-id')"> <dc:context connection="user"> <dc:statement> SELECT COALESCE(ld_mode, '') AS ldm, COALESCE(ld_locations, '') AS ldl, COALESCE(ld_from, '') AS ldf, COALESCE(ld_to, '') AS ldt FROM master_artifacts_range WHERE gid = CAST(${artifact-id} AS uuid) </dc:statement> <dc:for-each> <dc:variable name="fromkm" type="number" expr="dc:fromValue($ldm, $ldl, $ldf)"/> <dc:variable name="tokm" type="number" expr="dc:toValue($ldm, $ldl, $ldt)"/> <dc:macro-body/> </dc:for-each> </dc:context> </dc:when> <dc:otherwise> <dc:variable name="fromkm" type="number" expr="dc:fromValue('', '', '')"/> <dc:variable name="tokm" type="number" expr="dc:toValue('', '', '')"/> <dc:macro-body/> </dc:otherwise> </dc:choose> </dc:macro> </datacage> </dc:template>