Mercurial > dive4elements > river
view artifacts/doc/conf/meta-data.xml @ 6021:5f34e4cb8095 3.0.4
Use the out attribute everywhere where there is a factory
This removes the ID's hack with outs and resolves problems
created by that.
Where the out was already set previously the dynamic out has
been commented out.
| author | Andre Heinecke <aheinecke@intevation.de> |
|---|---|
| date | Tue, 14 May 2013 18:55:55 +0200 |
| parents | f049f9521a51 |
| children | 725ae04f7cad |
line wrap: on
line source
<?xml version="1.0" encoding="UTF-8"?> <dc:template xmlns:dc="http://www.intevation.org/2011/Datacage"> <datacage> <dc:comment> Statement to load data from wsts. </dc:comment> <dc:macro name="SQL-wst_columns_statement"> <dc:statement> SELECT wst_columns.id AS prot_column_id, wst_columns.name AS prot_column_name, wst_columns.position AS prot_rel_pos, wst_columns.description AS info, wst_ranges.a AS deffrom, wst_ranges.b AS defto FROM wst_columns JOIN wst_ranges ON wst_columns.id = wst_ranges.wst_column_id WHERE wst_columns.wst_id = ${prot_id} AND NOT((${tokm} < wst_ranges.a) OR (${fromkm} > wst_ranges.b)) ORDER by wst_columns.position </dc:statement> </dc:macro> <dc:comment> Load user specific distance information from artifact. </dc:comment> <dc:macro name="user-range"> <dc:choose> <dc:when test="dc:contains($parameters, 'user-id')"> <dc:context connection="user"> <dc:statement> SELECT COALESCE(ld_mode, '') AS ldm, COALESCE(ld_locations, '') AS ldl, COALESCE(ld_from, '') AS ldf, COALESCE(ld_to, '') AS ldt FROM master_artifacts_range WHERE gid = CAST(${artifact-id} AS uuid) </dc:statement> <dc:for-each> <dc:variable name="fromkm" type="number" expr="dc:fromValue($ldm, $ldl, $ldf)"/> <dc:variable name="tokm" type="number" expr="dc:toValue($ldm, $ldl, $ldt)"/> <dc:macro-body/> </dc:for-each> </dc:context> </dc:when> <dc:otherwise> <dc:variable name="fromkm" type="number" expr="dc:fromValue('', '', '')"/> <dc:variable name="tokm" type="number" expr="dc:toValue('', '', '')"/> <dc:macro-body/> </dc:otherwise> </dc:choose> </dc:macro> <dc:comment> System part. Load data for the given river. </dc:comment> <dc:macro name="load-system"> <dc:context connection="system"> <dc:statement> SELECT id AS river_id, name AS river_name FROM rivers WHERE lower(name) LIKE lower(${river}) </dc:statement> <dc:for-each> <dc:comment> Base-data macros (mostly data imported from wst-files). </dc:comment> <dc:macro name="basedata_0"> <dc:call-macro name="user-range"> <dc:comment comment=" BASEDATA ---------------------------"/> <basedata> <dc:context connection="system"> <dc:statement> SELECT id AS prot_id, description AS prot_description FROM wsts WHERE kind = 0 AND river_id = ${river_id} </dc:statement> <dc:for-each> <basedata name="{$prot_description}"> <dc:context> <dc:call-macro name="SQL-wst_columns_statement"/> <dc:for-each> <column name="{$prot_column_name}" ids="base_data-wstv-{$prot_rel_pos}-{$prot_id}" factory="staticwqkms" out="{$OUT}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </dc:context> </basedata> </dc:for-each> </dc:context> </basedata> </dc:call-macro> </dc:macro> <dc:macro name="basedata_0_wq"> <dc:call-macro name="user-range"> <dc:comment comment=" BASEDATA ---------------------------"/> <basedata> <dc:context connection="system"> <dc:statement> SELECT id AS prot_id, description AS prot_description FROM wsts WHERE kind = 0 AND river_id = ${river_id} </dc:statement> <dc:for-each> <basedata name="{$prot_description}"> <dc:context> <dc:call-macro name="SQL-wst_columns_statement"/> <dc:for-each> <column name="{$prot_column_name}" ids="base_data-wstv-{$prot_rel_pos}-{$prot_id}" factory="wqinterpol" out="{$OUT}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </dc:context> </basedata> </dc:for-each> </dc:context> </basedata> </dc:call-macro> </dc:macro> <dc:macro name="basedata_1_additionals_marks"> <dc:call-macro name="user-range"> <dc:comment comment=".ZUS -------------------------------"/> <additionals> <dc:context connection="system"> <dc:statement> SELECT id AS prot_id, description AS prot_description FROM wsts WHERE kind = 1 AND river_id = ${river_id} </dc:statement> <dc:for-each> <additional name="{$prot_description}"> <dc:context> <dc:call-macro name="SQL-wst_columns_statement"/> <dc:for-each> <column name="{$prot_column_name}" ids="additionalsmarks-wstv-{$prot_rel_pos}-{$prot_id}" factory="staticwkms" out="{$OUT}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </dc:context></additional> </dc:for-each> </dc:context> </additionals> </dc:call-macro> </dc:macro> <dc:macro name="basedata_1_additionals"> <dc:call-macro name="user-range"> <dc:comment comment=".ZUS -------------------------------"/> <additionals> <dc:context connection="system"> <dc:statement> SELECT id AS prot_id, description AS prot_description FROM wsts WHERE kind = 1 AND river_id = ${river_id} </dc:statement> <dc:for-each> <additional name="{dc:replace($prot_description, 'Zus.Längsschnitte/', '')}"> <dc:context> <dc:call-macro name="SQL-wst_columns_statement"/> <dc:for-each> <column name="{$prot_column_name}" ids="additionals-wstv-{$prot_rel_pos}-{$prot_id}" factory="staticwqkms" out="{$OUT}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </dc:context> </additional> </dc:for-each> </dc:context> </additionals> </dc:call-macro> </dc:macro> <dc:macro name="basedata_1_additionals-relative_point"> <dc:call-macro name="user-range"> <dc:comment comment=".ZUS -------------------------------"/> <additionals> <dc:context connection="system"> <dc:statement> SELECT id AS prot_id, description AS prot_description FROM wsts WHERE kind = 1 AND river_id = ${river_id} </dc:statement> <dc:for-each> <relativepoint name="{$prot_description}"> <dc:context> <dc:call-macro name="SQL-wst_columns_statement"/> <dc:for-each> <column name="{$prot_column_name}" ids="additionals-wstv-{$prot_rel_pos}-{$prot_id}" factory="staticwkms" out="{$OUT}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </dc:context> </relativepoint> </dc:for-each> </dc:context> </additionals> </dc:call-macro> </dc:macro> <dc:macro name="basedata_2_fixations_wqkms"> <dc:call-macro name="user-range"> <fixations> <dc:context connection="system"> <dc:statement> SELECT id AS prot_id, description AS prot_description FROM wsts WHERE kind = 2 AND river_id = ${river_id} ORDER BY prot_description </dc:statement> <dc:for-each> <fixation name="{dc:replace($prot_description, 'Fixierungen/', '')}"> <dc:context> <dc:call-macro name="SQL-wst_columns_statement"/> <dc:for-each> <column name="{$prot_column_name}" ids="fixations-wstv-{$prot_rel_pos}-{$prot_id}" factory="wqinterpol" out="{$OUT}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </dc:context> </fixation> </dc:for-each> </dc:context> </fixations> </dc:call-macro> </dc:macro> <dc:macro name="basedata_2_fixations"> <dc:call-macro name="user-range"> <fixations> <dc:context connection="system"> <dc:statement> SELECT id AS prot_id, description AS prot_description FROM wsts WHERE kind = 2 AND river_id = ${river_id} ORDER BY prot_description </dc:statement> <dc:for-each> <fixation name="{dc:replace($prot_description, 'Fixierungen/', '')}"> <dc:context> <dc:call-macro name="SQL-wst_columns_statement"/> <dc:for-each> <column name="{$prot_column_name}" ids="fixations-wstv-{$prot_rel_pos}-{$prot_id}" factory="staticwqkms" out="{$OUT}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </dc:context> </fixation> </dc:for-each> </dc:context> </fixations> </dc:call-macro> </dc:macro> <dc:macro name="basedata_2_fixations_relative_point"> <dc:call-macro name="user-range"> <fixations> <dc:context connection="system"> <dc:statement> SELECT id AS prot_id, description AS prot_description FROM wsts WHERE kind = 2 AND river_id = ${river_id} ORDER BY prot_description </dc:statement> <dc:for-each> <relativepoint name="{dc:replace($prot_description, 'Fixierungen/', '')}"> <dc:context> <dc:call-macro name="SQL-wst_columns_statement"/> <dc:for-each> <column name="{$prot_column_name}" ids="fixations-wstv-{$prot_rel_pos}-{$prot_id}" factory="staticwkms" out="{$OUT}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </dc:context> </relativepoint> </dc:for-each> </dc:context> </fixations> </dc:call-macro> </dc:macro> <dc:macro name="basedata_3_officials"> <dc:call-macro name="user-range"> <dc:comment comment=".wst -------------------------------"/> <officiallines> <dc:context connection="system"> <dc:statement> SELECT id AS prot_id, description AS prot_description FROM wsts WHERE kind = 3 AND river_id = ${river_id} </dc:statement> <dc:for-each> <official name="{$prot_description}"> <dc:context> <dc:call-macro name="SQL-wst_columns_statement"/> <dc:for-each> <column name="{$prot_column_name}" ids="additionals-wstv-{$prot_rel_pos}-{$prot_id}" factory="staticwqkms" out="{$OUT}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </dc:context> </official> </dc:for-each> </dc:context> </officiallines> </dc:call-macro> </dc:macro> <dc:macro name="basedata_4_heightmarks-points-relative_points"> <dc:call-macro name="user-range"> <heightmarks> <dc:context connection="system"> <dc:statement> SELECT id AS prot_id, description AS prot_description FROM wsts WHERE kind = 4 AND river_id = ${river_id} </dc:statement> <dc:for-each> <relativepoint name="{$prot_description}"> <dc:context> <dc:call-macro name="SQL-wst_columns_statement"/> <dc:for-each> <column name="{$prot_column_name}" ids="heightmarks_points-wstv-{$prot_rel_pos}-{$prot_id}" factory="staticwkms" out="{$OUT}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </dc:context> </relativepoint> </dc:for-each> </dc:context> </heightmarks> </dc:call-macro> </dc:macro> <dc:macro name="basedata_4_heightmarks-points"> <dc:call-macro name="user-range"> <heightmarks> <dc:context connection="system"> <dc:statement> SELECT id AS prot_id, description AS prot_description FROM wsts WHERE kind = 4 AND river_id = ${river_id} </dc:statement> <dc:for-each> <heightmark name="{dc:replace($prot_description, 'HW-Marken/', '')}"> <dc:context> <dc:call-macro name="SQL-wst_columns_statement"/> <dc:for-each> <column name="{$prot_column_name}" ids="heightmarks_points-wstv-{$prot_rel_pos}-{$prot_id}" factory="staticwkms" out="{$OUT}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </dc:context> </heightmark> </dc:for-each> </dc:context> </heightmarks> </dc:call-macro> </dc:macro> <dc:macro name="basedata_5_flood-protections_relative_points"> <dc:call-macro name="user-range"> <flood_protections id="flood-protections-{$river_id}"> <dc:context connection="system"> <dc:statement> SELECT id AS prot_id, description AS prot_description FROM wsts WHERE kind = 5 AND river_id = ${river_id} </dc:statement> <dc:for-each> <relativepoint name="{$prot_description}" db-id="{$prot_id}" factory="staticwkms" out="{$OUT}"> <columns> <dc:context> <dc:call-macro name="SQL-wst_columns_statement"/> <dc:for-each> <column name="{$prot_column_name}" ids="flood_protection-wstv-{$prot_rel_pos}-{$prot_id}" factory="staticwkms" out="{$OUT}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </dc:context> </columns> </relativepoint> </dc:for-each> </dc:context></flood_protections> </dc:call-macro> </dc:macro> <dc:macro name="basedata_5_flood-protections"> <dc:call-macro name="user-range"> <flood_protections id="flood-protections-{$river_id}"> <dc:context connection="system"> <dc:statement> SELECT id AS prot_id, description AS prot_description FROM wsts WHERE kind = 5 AND river_id = ${river_id} </dc:statement> <dc:for-each> <flood_protection name="{dc:replace($prot_description, 'HW-Schutzanlagen/', '')}" db-id="{$prot_id}" factory="staticwkms" out="{$OUT}"> <dc:context> <dc:call-macro name="SQL-wst_columns_statement"/> <dc:for-each> <column name="{$prot_column_name}" ids="flood_protection-wstv-{$prot_rel_pos}-{$prot_id}" factory="staticwkms" out="{$OUT}" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </dc:context> </flood_protection> </dc:for-each> </dc:context> </flood_protections> </dc:call-macro> </dc:macro> <dc:macro name="mainvalues"> <wmainvalue factory="mainvalue" out="{$OUT}" ids="{$river_id}:w"/> <qmainvalue factory="mainvalue" out="{$OUT}" ids="{$river_id}:q"/> </dc:macro> <dc:macro name="qsectors"> <qsector factory="qsectors" out="{$OUT}" ids="{$river_id}"/> </dc:macro> <dc:macro name="annotations"> <annotation factory="annotations" out="{$OUT}" ids="{$river_id}"/> </dc:macro> <dc:macro name="annotations_per_type"> <annotations> <dc:context> <all_annotations factory="annotations" out="{$OUT}" ids="{$river_id}"/> <dc:statement> SELECT id AS anno_id, name AS anno_description FROM annotation_types </dc:statement> <dc:for-each> <annotation name="{$anno_description}" factory="annotations" out="{$OUT}" ids="{$river_id}:{$anno_description}"/> </dc:for-each> </dc:context> </annotations> </dc:macro> <dc:macro name="cross_sections"> <dc:call-macro name="user-range"> <cross_sections id="flood-protections-{$river_id}"> <dc:context connection="system"> <dc:statement> SELECT DISTINCT cs.id AS prot_id, cs.description AS prot_description FROM cross_sections cs JOIN cross_section_lines csl ON csl.cross_section_id = cs.id WHERE cs.river_id = ${river_id} AND csl.km BETWEEN ${fromkm} AND ${tokm} </dc:statement> <dc:for-each> <cross_section name="{$prot_description}" ids="{$prot_id}" factory="crosssections" out="{$OUT}"/> </dc:for-each> </dc:context> </cross_sections> </dc:call-macro> </dc:macro> <dc:macro name="hyks"> <dc:call-macro name="user-range"> <hyks id="hyk-{$river_id}"> <dc:context connection="system"> <dc:statement> SELECT DISTINCT h.id AS hyk_id, h.description AS hyk_description FROM hyks h JOIN hyk_entries he ON he.hyk_id = h.id WHERE river_id = ${river_id} AND he.km BETWEEN ${fromkm} AND ${tokm} </dc:statement> <dc:for-each> <hyk name="{$hyk_description}" ids="{$hyk_id}" factory="hyk" out="{$OUT}"/> </dc:for-each> </dc:context></hyks> </dc:call-macro> </dc:macro> <dc:macro name="flow_velocity_measurements"> <dc:call-macro name="user-range"> <flowvelocitymeasurement> <dc:context connection="system"> <dc:statement> SELECT id AS fvmid, description AS fvmd FROM flow_velocity_measurements WHERE river_id = ${river_id} </dc:statement> <dc:for-each> <flow_velocity_measurement name="{$fvmd}" ids="{$fvmid}" factory="flowvelocity" out="{$OUT}"> <dc:context> <dc:statement> SELECT id, description, station, datetime, v, w, q FROM flow_velocity_measure_values WHERE measurements_id = ${fvmid} AND station BETWEEN ${fromkm} AND ${tokm} </dc:statement> <dc:for-each> <measurement_value name="{$description} - {$station} - {$datetime}" ids="{$id}" factory="flowvelocity" out="{$OUT}"/> </dc:for-each> </dc:context> </flow_velocity_measurement> </dc:for-each> </dc:context> </flowvelocitymeasurement> </dc:call-macro> </dc:macro> <dc:macro name="sounding-width"> <soundings_width> <dc:context> <dc:statement> SELECT id AS bedh_id, year AS bedh_year, description AS bedh_descr FROM bed_height_single WHERE river_id = ${river_id} </dc:statement> <dc:for-each> <height factory="bedheight" out="{$OUT}" ids="bedheight-singlevalues-{$bedh_id}-{$bedh_year}" description="{$bedh_descr}"/> </dc:for-each> </dc:context> </soundings_width> </dc:macro> <dc:macro name="morph_width"> <morph_width> <dc:context> <dc:statement> SELECT id AS width_id FROM morphologic_width WHERE river_id = ${river_id} </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT min(station) AS from, max(station) AS to FROM morphologic_width_values WHERE morphologic_width_id = ${width_id} </dc:statement> <dc:for-each> <morphologic-width name="{$from} - {$to}" ids="{$width_id}" factory="morph-width"/> </dc:for-each> </dc:context> </dc:for-each> </dc:context> </morph_width> </dc:macro> <dc:macro name="longitudinal-section-prototype"> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:comment comment=" FIXATIONS ---------------------------"/> <dc:call-macro name="basedata_2_fixations"/> <dc:comment comment=" HOEHENMARKEN ---------------------------"/> <dc:call-macro name="basedata_4_heightmarks-points"/> <dc:comment comment=" AMTL LINIEN ---------------------------"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="basedata_5_flood-protections"/> <dc:call-macro name="annotations_per_type"/> </dc:macro> <dc:macro name="discharge_table_gauge"> <discharge_table_nn> <discharge_table_gauge> <dc:context> <dc:statement> SELECT id AS gauge_id, name AS gauge_name FROM gauges WHERE river_id = ${river_id} </dc:statement> <dc:for-each> <gauge name="{$gauge_name}" db-id="{$gauge_id}" factory="gaugedischarge" out="{$OUT}" from="{$g_start}" to="{$g_stop}" ids="{$gauge_name}"/> </dc:for-each> </dc:context> </discharge_table_gauge> </discharge_table_nn> </dc:macro> <dc:macro name="discharge_computed"> <discharge_table_nn> <discharge_table_gauge> <dc:context> <dc:statement> SELECT id AS gauge_id, name AS gauge_name FROM gauges WHERE river_id = ${river_id} </dc:statement> <dc:for-each> <gauge name="{$gauge_name}" db-id="{$gauge_id}" factory="gaugedischarge" out="{$OUT}" from="{$g_start}" to="{$g_stop}" ids="{$gauge_name}"/> <dc:comment> <!-- <gauge> <dc:attribute name="name" value="${gauge_name}"/> <dc:attribute name="db-id" value="${gauge_id}"/> <dc:context> <dc:statement> SELECT description AS gauge_desc, d.id AS discharge_id, ti.start_time AS g_start, ti.stop_time AS g_stop FROM discharge_tables d JOIN time_intervals ti ON d.time_interval_id = ti.id WHERE d.gauge_id = ${gauge_id} AND d.kind = 1 </dc:statement> <dc:for-each> <historical> <dc:attribute name="name" value="${gauge_desc}"/> <dc:attribute name="factory" value="gaugedischarge"/> <dc:attribute name="out" value="${out}"/> <dc:attribute name="from" value="${g_start}"/> <dc:attribute name="to" value="${g_stop}"/> <dc:attribute name="ids" value="${discharge_id}-${g_start}-${g_stop}"/> </historical> </dc:for-each> </dc:context> </gauge> --> </dc:comment> </dc:for-each> </dc:context> </discharge_table_gauge> </discharge_table_nn> </dc:macro> <dc:macro name="discharge_fix_wq"> <discharge_table_nn> <discharge_table_gauge> <dc:context> <dc:statement> SELECT id AS gauge_id, name AS gauge_name FROM gauges WHERE river_id = ${river_id} </dc:statement> <dc:for-each> <gauge name="{$gauge_name}" db-id="{$gauge_id}" factory="gaugedischarge" out="{$OUT}" from="{$g_start}" to="{$g_stop}" ids="{$gauge_name}"/> </dc:for-each> </dc:context> </discharge_table_gauge> </discharge_table_nn> </dc:macro> <dc:choose> <dc:when test="dc:contains($parameters, 'recommended')"> <dc:comment> Recommendations (client shall load immediately). </dc:comment> <dc:iterate var="out" container="artifact-outs"> <dc:choose> <dc:when test="$out = 'w_differences'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'discharge_longitudinal_section'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'historical_discharge_wq'"> <dc:call-macro name="mainvalues"/> </dc:when> <dc:when test="$out = 'cross_section'"> <dc:call-macro name="cross_sections"/> <dc:call-macro name="hyks"/> </dc:when> <dc:when test="$out = 'computed_discharge_curve'"> <dc:call-macro name="mainvalues"/> <dc:call-macro name="basedata_2_fixations_wqkms"/> </dc:when> <dc:when test="$out = 'duration_curve'"> <dc:call-macro name="mainvalues"/> </dc:when> <dc:when test="$out = 'reference_curve'"> <dc:call-macro name="annotations"/> <dc:call-macro name="mainvalues"/> </dc:when> <dc:when test="$out = 'fix_wq_curve'"> <dc:call-macro name="qsectors"/> </dc:when> <dc:when test="$out = 'longitudinal_section'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'fix_longitudinal_section_curve'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'bed_difference_epoch'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'bed_difference_year'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'bed_difference_height_year'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'floodmap'"> <dc:call-macro name="flood-map-recommended"/> </dc:when> <dc:when test="$out = 'floodmap-hws'"> <dc:call-macro name="flood-map-recommended"/> </dc:when> <dc:when test="$out = 'minfo-heights'"> <dc:call-macro name="minfo-heights"/> <dc:macro name="minfo-heights"> <bedheights> <dc:call-macro name="bed-heights-single"/> <dc:call-macro name="bed-heights-epoch"/> </bedheights> </dc:macro> </dc:when> <dc:when test="$out = 'minfo-heights-epoch'"> <bedheights> <dc:call-macro name="bed-heights-epoch"/> </bedheights> </dc:when> </dc:choose> </dc:iterate> </dc:when> <dc:otherwise> <dc:comment> Non - Recommendations. </dc:comment> <dc:iterate var="out" container="artifact-outs"> <dc:choose> <dc:when test="$out = 'cross_section'"> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_2_fixations"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="basedata_4_heightmarks-points"/> <dc:call-macro name="cross_sections"/> <dc:call-macro name="hyks"/> </dc:when> <dc:when test="$out = 'longitudinal_section'"> <dc:call-macro name="longitudinal-section-prototype"/> </dc:when> <dc:when test="$out = 'w_differences'"> <dc:call-macro name="longitudinal-section-prototype"/> </dc:when> <dc:when test="$out = 'discharge_longitudinal_section'"> <dc:call-macro name="longitudinal-section-prototype"/> </dc:when> <dc:when test="$out = 'duration_curve'"> <dc:call-macro name="mainvalues"/> <dc:call-macro name="basedata_2_fixations_relative_point"/> <dc:call-macro name="basedata_4_heightmarks-points-relative_points"/> <dc:call-macro name="basedata_5_flood-protections_relative_points"/> </dc:when> <dc:when test="$out = 'reference_curve'"> <dc:call-macro name="annotations"/> <dc:call-macro name="basedata_1_additionals-relative_point"/> <dc:comment comment=" FIXATIONS ---------------------------"/> <dc:call-macro name="basedata_2_fixations_relative_point"/> <dc:comment comment=" HOEHENMARKEN ---------------------------"/> <dc:call-macro name="basedata_4_heightmarks-points-relative_points"/> <dc:call-macro name="basedata_5_flood-protections_relative_points"/> </dc:when> <dc:when test="$out = 'fix_wq_curve'"> <dc:call-macro name="basedata_0_wq"/> <dc:call-macro name="basedata_1_additionals_marks"/> <dc:call-macro name="basedata_2_fixations_wqkms"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="basedata_4_heightmarks-points"/> <dc:call-macro name="basedata_5_flood-protections_relative_points"/> <dc:call-macro name="discharge_table_gauge"/> <dc:call-macro name="discharge_fix_wq"/> </dc:when> <dc:when test="$out = 'fix_deltawt_curve'"> </dc:when> <dc:when test="$out = 'fix_longitudinal_section_curve'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'map'"> <dc:call-macro name="flood-map-complete"/> </dc:when> <dc:when test="$out = 'flow_velocity'"> <dc:call-macro name="annotations_per_type"/> <dc:call-macro name="flow_velocity_measurements"/> </dc:when> <dc:when test="$out = 'bed_longitudinal_section'"> <dc:call-macro name="annotations_per_type"/> </dc:when> <dc:when test="$out = 'sedimentload_ls'"> <dc:call-macro name="annotations_per_type"/> <dc:call-macro name="morph_width"/> </dc:when> <dc:comment> MINFO bedheight middle </dc:comment> <dc:when test="$out = 'bedheight_middle'"> <dc:call-macro name="sounding-width"/> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_2_fixations"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="annotations_per_type"/> </dc:when> <dc:when test="$out = 'bed_difference_year'"> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_2_fixations"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="annotations_per_type"/> <dc:call-macro name="morph_width"/> </dc:when> <dc:when test="$out = 'bed_difference_epoch'"> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_2_fixations"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="annotations_per_type"/> <dc:call-macro name="morph_width"/> </dc:when> <dc:when test="$out = 'floodmap'"> <dc:choose> <dc:when test="dc:contains($parameters, 'dem')"> <dc:call-macro name="flood-map-dem"/> </dc:when> <dc:when test="dc:contains($parameters, 'hws')"> <hws> <dc:call-macro name="flood-map-hws-lines"/> <dc:call-macro name="flood-map-hws-points"/> </hws> </dc:when> <dc:otherwise> <dc:call-macro name="flood-map-complete"/> </dc:otherwise> </dc:choose> </dc:when> <dc:when test="$out = 'floodmap-hws'"> <dc:choose> <dc:when test="dc:contains($parameters, 'dem')"> <dc:call-macro name="flood-map-dem"/> </dc:when> <dc:when test="dc:contains($parameters, 'hws')"> <hws> <dc:call-macro name="flood-map-hws-lines"/> <dc:call-macro name="flood-map-hws-points"/> </hws> </dc:when> <dc:otherwise> <dc:call-macro name="flood-map-complete"/> </dc:otherwise> </dc:choose> </dc:when> <dc:when test="$out = 'computed_discharge_curve'"> <dc:call-macro name="discharge_computed"/> <dc:call-macro name="basedata_2_fixations_wqkms"/> <dc:call-macro name="basedata_5_flood-protections"/> <!-- former waterlevels --> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <!-- former flood-water-marks --> <dc:call-macro name="basedata_4_heightmarks-points"/> <computed_discharge_curve> <dc:call-macro name="mainvalues"/> </computed_discharge_curve> </dc:when> <dc:when test="$out = 'minfo-heights'"> <dc:call-macro name="minfo-heights"/> <dc:macro name="minfo-heights"> <bedheights> <dc:call-macro name="bed-heights-single"/> <dc:call-macro name="bed-heights-epoch"/> </bedheights> </dc:macro> </dc:when> <dc:when test="$out = 'minfo-heights-epoch'"> <bedheights> <dc:call-macro name="bed-heights-epoch"/> </bedheights> </dc:when> </dc:choose> </dc:iterate> </dc:otherwise> </dc:choose> <dc:if test="dc:contains($artifact-outs, 'floodmap') or dc:contains($artifact-outs, 'floodmap-hws')"> <dc:macro name="flood-map-recommended"> <dc:comment> FIXME: Following two macros look identical to me. </dc:comment> <kilometrage> <riveraxis factory="riveraxis" out="{$OUT}" ids="{$river_id}"/> </kilometrage> <rastermap> <background factory="wmsbackground" out="{$OUT}" ids="{$river_id}"/> </rastermap> </dc:macro> <dc:macro name="flood-map-dem"> <dems> <dc:context> <dc:statement> SELECT d.id AS dem_id, r.a AS dem_lower, r.b AS dem_upper, d.name AS name, t.start_time AS start_time, t.stop_time AS stop_time, 'Projektion: ' || d.projection || '$' || 'Rasterweite: ' || d.resolution || 'm$' || 'Format: ' || d.format || '$' || 'Zeitraum: ' AS info FROM dem d JOIN ranges r ON d.range_id = r.id LEFT JOIN time_intervals t ON d.time_interval_id = t.id WHERE d.river_id = ${river_id} </dc:statement> <dc:for-each> <dem factory="demfactory" out="{$OUT}" ids="{$dem_id}" name="{$name}" info="{dc:replace($info, '$', '<BR>')}{dc:date-format('yyyy', $start_time)} - {dc:date-format('yyyy', $stop_time)}"/> </dc:for-each> </dc:context> </dems> </dc:macro> <dc:macro name="filter_hws_ddg"> <dc:macro name="durchlass_damm_graben"> <dc:macro name="ddg_factory"> <dc:for-each> <hws factory="hwsfactory" out="{$OUT}" name="{$hws_name}"/> </dc:for-each> </dc:macro> <dc:filter expr="$hws_kind=1"> <dc:if test="dc:has-result()"> <Durchlass><dc:call-macro name="ddg_factory"/></Durchlass> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=2"> <dc:if test="dc:has-result()"> <Damm><dc:call-macro name="ddg_factory"/></Damm> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=3"> <dc:if test="dc:has-result()"> <Graben><dc:call-macro name="ddg_factory"/></Graben> </dc:if> </dc:filter> </dc:macro> <dc:filter expr="$hws_official=1"> <dc:if test="dc:has-result()"> <official> <dc:call-macro name="durchlass_damm_graben"/> </official> </dc:if> </dc:filter> <dc:filter expr="$hws_official=0"> <dc:if test="dc:has-result()"> <inofficial> <dc:call-macro name="durchlass_damm_graben"/> </inofficial> </dc:if> </dc:filter> </dc:macro> <dc:macro name="flood-map-hws-lines"> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, official AS hws_official, kind_id AS hws_kind FROM hws_lines WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <lines> <dc:call-macro name="filter_hws_ddg"/> </lines> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-hws-points"> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, official AS hws_official, kind_id AS hws_kind FROM hws_points WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <points> <dc:call-macro name="filter_hws_ddg"/> </points> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-km"> <dc:context> <dc:statement> SELECT DISTINCT 1 FROM river_axes_km WHERE river_id = ${river_id} </dc:statement> <dc:for-each> <kilometrage factory="wmskmfactory" out="{$OUT}" ids="{$river_id}"/> </dc:for-each> </dc:context> </dc:macro> <dc:macro name="flood-map-qps"> <dc:context> <dc:comment>Grab only the actual first</dc:comment> <dc:statement> SELECT DISTINCT cs.kind_id AS kind_id, ck.name AS kind_name FROM cross_section_tracks cs JOIN cross_section_track_kinds ck on cs.kind_id = ck.id WHERE river_id = ${river_id} AND kind_id=1 </dc:statement> <dc:if test="dc:has-result()"> <dc:for-each> <actual description="{$kind_name}" factory="wmsqpsfactory" out="{$OUT}" ids="{$river_id};{$kind_name};{$kind_id}"/> </dc:for-each> </dc:if> </dc:context> <dc:context> <dc:comment>Now the other tracks</dc:comment> <dc:statement> SELECT DISTINCT cs.kind_id AS kind_id, ck.name AS kind_name, cs.name AS layer_name FROM cross_section_tracks cs JOIN cross_section_track_kinds ck on cs.kind_id = ck.id WHERE river_id = ${river_id} AND kind_id=0 </dc:statement> <dc:if test="dc:has-result()"> <other> <dc:for-each> <misc-qps description="{$layer_name}" factory="wmsqpsfactory" out="{$OUT}" ids="{$river_id};{$layer_name};{$kind_id}"/> </dc:for-each> </other> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-riveraxis"> <dc:context> <dc:statement> SELECT DISTINCT ax.kind_id AS kind_id, ak.name AS kind_name FROM river_axes ax JOIN axis_kinds ak on ax.kind_id = ak.id WHERE river_id = ${river_id} AND kind_id=1 </dc:statement> <dc:if test="dc:has-result()"> <dc:for-each> <actual description="{$kind_name}" ids="{$river_id};{$kind_name};{$kind_id}" factory="riveraxis" out="{$OUT}"/> </dc:for-each> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT ak.name AS kind_name, ax.kind_id AS kind_id, ax.name AS layer_name FROM river_axes ax JOIN axis_kinds ak on ax.kind_id = ak.id WHERE river_id = ${river_id} AND kind_id <> 1 </dc:statement> <dc:if test="dc:has-result()"> <other> <dc:for-each> <misc-axis description="{$layer_name}" ids="{$river_id};{$layer_name};{$kind_id}" factory="riveraxis" out="{$OUT}"/> </dc:for-each> </other> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-hydr-boundaries-state"> <dc:context> <dc:statement> SELECT DISTINCT name FROM hydr_boundaries WHERE river_id = ${river_id} AND kind = 2 </dc:statement> <dc:for-each> <line factory="wmshydrboundariesfactory" out="{$OUT}" ids="{$river_id};{$name};2" name="{$name}"/> </dc:for-each> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT name FROM hydr_boundaries_poly WHERE river_id = ${river_id} AND kind = 2 </dc:statement> <dc:for-each> <line factory="wmshydrboundariespolyfactory" out="{$OUT}" ids="{$river_id};{$name};2" name="{$name}"/> </dc:for-each> </dc:context> </dc:macro> <dc:macro name="flood-map-hydr-boundaries-lines"> <dc:context> <dc:statement> SELECT DISTINCT name FROM hydr_boundaries WHERE river_id = ${river_id} AND kind = 1 </dc:statement> <dc:comment> What about all other line kinds?</dc:comment> <dc:if test="dc:has-result()"> <lines> <dc:for-each> <line factory="wmshydrboundariesfactory" out="{$OUT}" ids="{$river_id};{$name};1" name="{$name}"/> </dc:for-each> </lines> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-hydr-boundaries-poly"> <dc:context> <dc:statement> SELECT DISTINCT b.sectie AS sectie_id, sk.name AS sectie FROM hydr_boundaries_poly b JOIN sectie_kinds sk ON b.sectie = sk.id WHERE b.river_id = ${river_id} AND b.kind = 1 </dc:statement> <dc:if test="dc:has-result()"> <sobek_areas> <dc:for-each> <boundary name="{$sectie}" factory="wmshydrboundariespolyfactory" out="{$OUT}" ids="{$river_id};{$sectie};1;{$sectie_id};-1"/> </dc:for-each> </sobek_areas> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT b.sobek AS sobek_id, sk.name AS sobek FROM hydr_boundaries_poly b JOIN sobek_kinds sk ON b.sobek = sk.id WHERE b.river_id = ${river_id} AND b.kind = 1 </dc:statement> <dc:if test="dc:has-result()"> <sobek_flooded> <dc:for-each> <boundary name="{$sobek}" factory="wmshydrboundariespolyfactory" out="{$OUT}" ids="{$river_id};{$sobek};1;-1;{$sobek_id}"/> </dc:for-each> </sobek_flooded> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT b.name AS name FROM hydr_boundaries_poly b WHERE b.river_id = ${river_id} AND b.kind = 1 AND b.sobek IS NULL AND b.sectie is NULL </dc:statement> <dc:for-each> <boundary name="{$name}" factory="wmshydrboundariespolyfactory" out="{$OUT}" ids="{$river_id};{$name}"/> </dc:for-each> </dc:context> </dc:macro> <dc:macro name="flood-map-hydr-boundaries"> <bfg_model> <areas> <dc:call-macro name="flood-map-hydr-boundaries-poly"/> </areas> <dc:call-macro name="flood-map-hydr-boundaries-lines"/> </bfg_model> <federal> <dc:call-macro name="flood-map-hydr-boundaries-state"/> </federal> </dc:macro> <dc:macro name="flood-map-floodplain"> <floodplain> <dc:context> <dc:statement> SELECT DISTINCT fp.kind_id AS kind_id, flk.name AS kind_name FROM floodplain fp JOIN floodplain_kinds flk on fp.kind_id = flk.id WHERE river_id = ${river_id} AND kind_id=1 </dc:statement> <dc:if test="dc:has-result()"> <dc:for-each> <floody factory="wmsfloodplainfactory" out="{$OUT}" description="{$kind_name}" ids="{$river_id};{$kind_name};{$kind_id}"/> </dc:for-each> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT flk.name AS kind_name, fp.kind_id AS kind_id, fp.name AS layer_name FROM floodplain fp JOIN floodplain_kinds flk on fp.kind_id = flk.id WHERE river_id = ${river_id} AND kind_id <> 1 </dc:statement> <dc:if test="dc:has-result()"> <other> <dc:for-each> <floody factory="wmsfloodplainfactory" out="{$OUT}" description="{$layer_name}" ids="{$river_id};{$layer_name};{$kind_id}"/> </dc:for-each> </other> </dc:if> </dc:context> </floodplain> </dc:macro> <dc:macro name="hwslines_by_kind"> <dc:comment> Call from a context where fed_name hws_kind hws_name and river_id is availble </dc:comment> <dc:macro name="hwslines_by_kind_factory"> <dc:for-each> <hws factory="wmshwslinesfactory" out="{$OUT}" ids="{$river_id};{$hws_name}" name="{$hws_name}"/> </dc:for-each> </dc:macro> <dc:filter expr="$hws_kind=1"> <dc:if test="dc:has-result()"> <Durchlass> <dc:call-macro name="hwslines_by_kind_factory"/> </Durchlass> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=2"> <dc:if test="dc:has-result()"> <Damm> <dc:call-macro name="hwslines_by_kind_factory"/> </Damm> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=3"> <dc:if test="dc:has-result()"> <Graben> <dc:call-macro name="hwslines_by_kind_factory"/> </Graben> </dc:if> </dc:filter> </dc:macro> <dc:macro name="hwslines"> <hws_lines> <official> <dc:context> <dc:statement> SELECT DISTINCT fs.name AS fed_name, fs.id AS fed_id FROM hws_lines hws JOIN fed_states fs ON hws.fed_state_id = fs.id WHERE river_id = ${river_id} AND hws.official=1 </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, kind_id AS hws_kind FROM hws_lines WHERE river_id = ${river_id} AND official=1 AND fed_state_id = ${fed_id} ORDER BY name </dc:statement> <fedstate description="{$fed_name}"> <dc:call-macro name="hwslines_by_kind"/> </fedstate> </dc:context> </dc:for-each> </dc:context> <dc:context> <dc:statement> SELECT distinct name AS hws_name, kind_id AS hws_kind FROM hws_lines WHERE river_id = ${river_id} AND official=1 AND fed_state_id IS NULL ORDER BY name </dc:statement> <hws_fed_unknown> <dc:call-macro name="hwslines_by_kind"/> </hws_fed_unknown> </dc:context> </official> <inofficial> <dc:context> <dc:statement> SELECT DISTINCT fs.name AS fed_name, fs.id AS fed_id FROM hws_lines hws JOIN fed_states fs ON hws.fed_state_id = fs.id WHERE river_id = ${river_id} AND hws.official=0 </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, kind_id AS hws_kind FROM hws_lines WHERE river_id = ${river_id} AND official=0 AND fed_state_id = ${fed_id} ORDER BY name </dc:statement> <fedstate description="{$fed_name}"> <dc:call-macro name="hwslines_by_kind"/> </fedstate> </dc:context> </dc:for-each> </dc:context> <dc:context> <dc:statement> SELECT distinct name AS hws_name, kind_id AS hws_kind FROM hws_lines WHERE river_id = ${river_id} AND official=0 AND fed_state_id IS NULL ORDER BY name </dc:statement> <hws_fed_unknown> <dc:call-macro name="hwslines_by_kind"/> </hws_fed_unknown> </dc:context> </inofficial> </hws_lines> </dc:macro> <dc:macro name="hwspoints_by_kind"> <dc:comment> Call from a context where fed_name hws_kind hws_name and river_id is availble </dc:comment> <dc:macro name="hwspoints_by_kind_factory"> <dc:for-each> <hws factory="wmshwspointsfactory" out="{$OUT}" ids="{$river_id};{$hws_name}" name="{$hws_name}"/> </dc:for-each> </dc:macro> <dc:filter expr="$hws_kind=1"> <dc:if test="dc:has-result()"> <Durchlass> <dc:call-macro name="hwspoints_by_kind_factory"/> </Durchlass> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=2"> <dc:if test="dc:has-result()"> <Damm> <dc:call-macro name="hwspoints_by_kind_factory"/> </Damm> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=3"> <dc:if test="dc:has-result()"> <Graben> <dc:call-macro name="hwspoints_by_kind_factory"/> </Graben> </dc:if> </dc:filter> </dc:macro> <dc:macro name="hwspoints"> <hws_points> <official> <dc:context> <dc:statement> SELECT DISTINCT fs.name AS fed_name, fs.id AS fed_id FROM hws_points hws JOIN fed_states fs ON hws.fed_state_id = fs.id WHERE river_id = ${river_id} AND hws.official=1 </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, kind_id AS hws_kind FROM hws_points WHERE river_id = ${river_id} AND official=1 AND fed_state_id = ${fed_id} ORDER BY name </dc:statement> <fedstate description="{$fed_name}"> <dc:call-macro name="hwspoints_by_kind"/> </fedstate> </dc:context> </dc:for-each> </dc:context> <dc:context> <dc:statement> SELECT distinct name AS hws_name, kind_id AS hws_kind FROM hws_points WHERE river_id = ${river_id} AND official=1 AND fed_state_id IS NULL ORDER BY name </dc:statement> <hws_fed_unknown> <dc:call-macro name="hwspoints_by_kind"/> </hws_fed_unknown> </dc:context> </official> <inofficial> <dc:context> <dc:statement> SELECT DISTINCT fs.name AS fed_name, fs.id AS fed_id FROM hws_points hws JOIN fed_states fs ON hws.fed_state_id = fs.id WHERE river_id = ${river_id} AND hws.official=0 </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, kind_id AS hws_kind FROM hws_points WHERE river_id = ${river_id} AND official=0 AND fed_state_id = ${fed_id} ORDER BY name </dc:statement> <fedstate description="{$fed_name}"> <dc:call-macro name="hwspoints_by_kind"/> </fedstate> </dc:context> </dc:for-each> </dc:context> <dc:context> <dc:statement> SELECT distinct name AS hws_name, kind_id AS hws_kind FROM hws_points WHERE river_id = ${river_id} AND official=0 AND fed_state_id IS NULL ORDER BY name </dc:statement> <hws_fed_unknown> <dc:call-macro name="hwspoints_by_kind"/> </hws_fed_unknown> </dc:context> </inofficial> </hws_points> </dc:macro> <dc:macro name="flood-map-buildings"> <dc:context> <dc:statement> SELECT DISTINCT b.kind_id AS building_kind_id, bk.name AS building_kind FROM buildings b JOIN building_kinds bk ON b.kind_id = bk.id WHERE b.river_id = ${river_id} AND b.kind_id <> 0 </dc:statement> <dc:for-each> <buildings description="{$building_kind}" factory="wmsbuildingsfactory" out="{$OUT}" ids="{$river_id};{$building_kind};{$building_kind_id}"/> </dc:for-each> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT b.name AS building_name, bk.name AS building_kind, b.kind_id AS building_kind_id FROM buildings b JOIN building_kinds bk ON b.kind_id = bk.id WHERE river_id = ${river_id} AND kind_id = 0 </dc:statement> <dc:if test="dc:has-result()"> <other> <dc:for-each> <buildings description="{$building_name}" factory="wmsbuildingsfactory" out="{$OUT}" ids="{$river_id};{$building_name}"/> </dc:for-each> </other> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT j.kind_id AS jetty_kind_id, jk.name AS jetty_kind FROM jetties j JOIN jetty_kinds jk ON j.kind_id = jk.id WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <jetties> <dc:for-each> <jetty description="{$jetty_kind}" factory="wmsjettiesfactory" out="{$OUT}" ids="{$river_id};{$jetty_kind};{$jetty_kind_id}"/> </dc:for-each> </jetties> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-fixpoints"> <dc:context> <dc:statement> SELECT name AS name FROM fixpoints WHERE river_id = ${river_id} GROUP BY name </dc:statement> <dc:for-each> <fixpoints factory="wmsfixpointsfactory" out="{$OUT}" ids="{$river_id};{$name}"/> </dc:for-each> </dc:context> </dc:macro> <dc:macro name="flood-map-gaugelocations"> <gauge_points factory="externalwmsfactory" out="{$OUT}" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;Pegelpunkte;Pegelpunkte (WSV)"/> <gauge_names factory="externalwmsfactory" out="{$OUT}" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;Pegelnamen;Pegelnamen (WSV)"/> <gauge_level factory="externalwmsfactory" out="{$OUT}" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;Pegelwasserstand;Aktueller Wasserstand (WSV)"/> <gauge_tendency factory="externalwmsfactory" out="{$OUT}" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;TendenzWasserstand;Tendenz des Wasserstands (WSV)"/> </dc:macro> <dc:macro name="flood-map-uesk"> <dc:context> <dc:statement> SELECT DISTINCT 1 from floodmaps where river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <uesk> <calculations> <dc:context> <dc:statement> SELECT DISTINCT 1 from floodmaps where river_id = ${river_id} AND (kind = 112 OR kind = 111) </dc:statement> <dc:if test="dc:has-result()"> <current> <dc:context> <dc:statement> SELECT DISTINCT name AS name FROM floodmaps WHERE river_id = ${river_id} AND kind = 111 </dc:statement> <dc:if test="dc:has-result()"> <bfg> <dc:for-each> <floodmaps factory="wmsfloodmapsfactory" out="{$OUT}" ids="{$river_id};{$name}" name="{$name}"/> </dc:for-each> </bfg> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT name AS name FROM floodmaps WHERE river_id = ${river_id} AND kind = 112 </dc:statement> <dc:if test="dc:has-result()"> <federal> <dc:for-each> <floodmaps factory="wmsfloodmapsfactory" out="{$OUT}" ids="{$river_id};{$name}" name="{$name}"/> </dc:for-each> </federal> </dc:if> </dc:context> </current> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT 1 from floodmaps where river_id = ${river_id} AND (kind = 122 OR kind = 121) </dc:statement> <dc:if test="dc:has-result()"> <potential> <dc:context> <dc:statement> SELECT DISTINCT name AS name FROM floodmaps WHERE river_id = ${river_id} AND kind = 121 </dc:statement> <dc:if test="dc:has-result()"> <bfg> <dc:for-each> <floodmaps factory="wmsfloodmapsfactory" out="{$OUT}" ids="{$river_id};{$name}" name="{$name}"/> </dc:for-each> </bfg> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT name AS name FROM floodmaps WHERE river_id = ${river_id} AND kind = 122 </dc:statement> <dc:if test="dc:has-result()"> <federal> <dc:for-each> <floodmaps factory="wmsfloodmapsfactory" out="{$OUT}" ids="{$river_id};{$name}" name="{$name}"/> </dc:for-each> </federal> </dc:if> </dc:context> </potential> </dc:if> </dc:context> </calculations> <dc:context> <dc:statement> SELECT DISTINCT source AS source FROM floodmaps WHERE river_id = ${river_id} AND kind = 200 </dc:statement> <dc:if test="dc:has-result()"> <measurements> <dc:for-each> <year name="{$source}"> <dc:context> <dc:statement> SELECT DISTINCT name AS name FROM floodmaps WHERE river_id = ${river_id} AND kind = 200 AND source = ${source} </dc:statement> <dc:for-each> <floodmaps factory="wmsfloodmapsfactory" out="{$OUT}" ids="{$river_id};{$name}" name="{$name}"/> </dc:for-each> </dc:context> </year> </dc:for-each> </measurements> </dc:if> </dc:context> </uesk> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-routing"> <qps> <dc:call-macro name="flood-map-qps"/> </qps> <dc:call-macro name="flood-map-fixpoints"/> <dc:call-macro name="flood-map-km"/> <axis> <dc:call-macro name="flood-map-riveraxis"/> </axis> </dc:macro> <dc:macro name="floodmarks"> <dc:context> <dc:statement> SELECT DISTINCT coalesce(CAST (year AS VARCHAR(64)), 'Unbekanntes Jahr') as year FROM flood_marks WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <floodmarks> <dc:for-each> <floodmark name="{$year}" factory="wmsfloodmarkfactory" out="{$OUT}" ids="{$river_id};{$year};{$year}"/> </dc:for-each> </floodmarks> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-complete"> <buildings> <dc:call-macro name="flood-map-buildings"/> </buildings> <catchments> <catchment_wms factory="externalwmsfactory" out="{$OUT}" ids="http://geoportal.bafg.de/wmsproxy/INSPIRE/DrainageBasin;HY.PHYSICALWATERS.CATCHMENTS;Einzugsgebiete (WMS)" /> <gaugelocations> <dc:call-macro name="flood-map-gaugelocations"/> </gaugelocations> </catchments> <dc:call-macro name="floodmarks"/> <hws> <dc:call-macro name="hwslines"/> <dc:call-macro name="hwspoints"/> </hws> <route_data> <dc:call-macro name="flood-map-routing"/> </route_data> <hydrboundaries> <dc:call-macro name="flood-map-floodplain"/> <dc:call-macro name="flood-map-hydr-boundaries"/> </hydrboundaries> <dc:call-macro name="flood-map-uesk"/> </dc:macro> </dc:if> <dc:macro name="bed-heights-single"> <single> <dc:context> <dc:statement> SELECT id AS bedh_id, year AS bedh_year, description AS bedh_descr FROM bed_height_single WHERE river_id = ${river_id} </dc:statement> <dc:for-each> <height factory="bedheight" out="{$OUT}" ids="bedheight-single-{$bedh_id}-{$bedh_year}" description="{$bedh_descr}"/> </dc:for-each> </dc:context> </single> </dc:macro> <dc:macro name="bed-heights-epoch"> <epoch> <dc:context> <dc:statement> SELECT id AS bedh_id, time_interval_id AS bedh_interval_id, description AS bedh_descr FROM bed_height_epoch WHERE river_id = ${river_id} </dc:statement> <dc:for-each> <height factory="bedheight" out="{$OUT}" ids="bedheight-epoch-{$bedh_id}-{$bedh_interval_id}" description="{$bedh_descr}"/> </dc:for-each> </dc:context> </epoch> </dc:macro> </dc:for-each> </dc:context> </dc:macro> <dc:choose> <dc:comment> User specific part ------------------ </dc:comment> <dc:when test="dc:contains($parameters, 'user-id') and not(dc:contains($artifact-outs, 'floodmap-hws'))"> <old_calculations> <dc:comment><!-- <dc:macro name="load-user">--></dc:comment> <dc:call-macro name="user-range"> <dc:context connection="user"> <dc:comment> Get the user and collection-id. </dc:comment> <dc:statement> SELECT u.id AS user_id, c.id AS collection_id, c.name AS collection_name FROM collections c JOIN users u ON c.user_id = u.id WHERE u.gid = CAST(${user-id} AS uuid) ORDER BY c.creation DESC </dc:statement> <dc:macro name="range-filter"> <dc:statement> SELECT m.id AS a_id, m.state AS a_state, m.gid AS a_gid, m.creation AS a_creation, COALESCE(ld_mode, '') AS ld_m, COALESCE(ld_locations, '') AS ld_l, COALESCE(ld_from, '') AS ld_f, COALESCE(ld_to, '') AS ld_t FROM master_artifacts_range m WHERE m.collection_id = ${collection_id} AND m.gid <> CAST(${artifact-id} AS uuid) AND EXISTS ( SELECT id FROM artifact_data ad WHERE ad.artifact_id = m.id AND k = 'river' AND v = ${river}) </dc:statement> <dc:for-each> <dc:variable name="from" type="number" expr="dc:fromValue($ld_m, $ld_l, $ld_f)"/> <dc:variable name="to" type="number" expr="dc:toValue($ld_m, $ld_l, $ld_t)"/> <dc:if test="($from >= $fromkm and $from <= $tokm) or ($to <= $tokm and $to >= $fromkm) or ($from <= $fromkm and $to >= $tokm)"> <dc:macro-body/> </dc:if> </dc:for-each> </dc:macro> <!-- OFFICIAL LINES --> <dc:macro name="officiallines_user"> <dc:comment comment=".wst -------------------------------"/> <officiallines> <dc:for-each> <dc:context> <dc:statement> SELECT m.id AS a_id, m.state AS a_state, m.gid AS a_gid, m.creation AS a_creation, ardg.v AS gaugy, arv.v AS wqsingle FROM master_artifacts m, artifact_data ardg, artifact_data arv WHERE m.collection_id = ${collection_id} AND m.gid = CAST(${artifact-id} AS uuid) AND ardg.artifact_id = m.id AND ardg.k = 'ld_gaugename' AND arv.artifact_id = m.id AND arv.k = 'wq_single' AND EXISTS ( SELECT id FROM artifact_data ad WHERE ad.artifact_id = m.id AND k = 'river' AND v = ${river}) </dc:statement> <dc:for-each> <dc:context connection="system"> <dc:statement> SELECT ol.wst_id AS wstid, ol.wst_column_pos AS wstcolpos, ol.name AS olname, ol.value AS oval FROM official_q_values ol WHERE ol.value = CAST(${wqsingle} AS NUMERIC(10,2)) AND ol.gauge_name = ${gaugy} </dc:statement> <dc:for-each> <dc:element name="${olname}"> <dc:attribute name="name" value="${olname}"/> <dc:attribute name="ids" value="additionals-wstv-${wstcolpos}-${wstid}"/> <dc:attribute name="factory" value="staticwkms"/> <dc:attribute name="out" value="${out}"/> </dc:element> </dc:for-each> </dc:context> </dc:for-each> </dc:context> </dc:for-each> </officiallines> </dc:macro> <!-- END OFFICIAL LINES --> <dc:comment> SHOW W-DIFFERENCES </dc:comment> <dc:macro name="differences"> <differences> <dc:for-each> <dc:context> <dc:call-macro name="range-filter"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE f.name = 'w_differences' and f.out_id = o.id and o.artifact_id = ${a_id} and a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="factory" value="winfo"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="ids" value="${aid}"/> <dc:attribute name="out" value="w_differences"/> </dc:element> </dc:for-each> </dc:context> </dc:call-macro> </dc:context> </dc:for-each> </differences> </dc:macro> <dc:comment> SHOW REFERENCE CURVE </dc:comment> <dc:macro name="reference-curves"> <reference_curves> <dc:for-each> <dc:context> <dc:call-macro name="user-range"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE f.name = 'reference_curve' and f.out_id = o.id and o.artifact_id = ${a_id} and a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="factory" value="winfo"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="ids" value="${aid}"/> <dc:attribute name="out" value="reference_curve"/> </dc:element> </dc:for-each> </dc:context> </dc:call-macro> </dc:context> </dc:for-each> </reference_curves> </dc:macro> <dc:comment> SHOW COMPUTED DISCHARGE CURVES </dc:comment> <dc:macro name="computed-discharge-curve"> <computed_discharge_curves> <dc:for-each> <dc:context> <dc:call-macro name="range-filter"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE f.name = 'computed_discharge_curve.q' and f.out_id = o.id and o.artifact_id = ${a_id} and a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="factory" value="winfo"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="ids" value="${aid}"/> <dc:attribute name="out" value="computed_discharge_curve"/> </dc:element> </dc:for-each> </dc:context> </dc:call-macro> </dc:context> </dc:for-each> </computed_discharge_curves> </dc:macro> <dc:comment> CROSS SECTION </dc:comment> <dc:macro name="waterlevels"> <waterlevels> <dc:for-each> <dc:context> <dc:call-macro name="range-filter"> <dc:context> <dc:statement> SELECT id AS out_id FROM outs WHERE artifact_id = ${a_id} AND name = 'cross_section' </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} ORDER BY num ASC, name DESC </dc:statement> <longitudinal_section_columns description="{$river} {$a_creation}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="winfo"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="cross_section"/> </dc:element> </dc:for-each> </longitudinal_section_columns> </dc:context> </dc:for-each> </dc:context> </dc:call-macro> </dc:context> </dc:for-each> </waterlevels> </dc:macro> <dc:macro name="longitudinal"> <waterlevels> <dc:for-each> <dc:context> <dc:call-macro name="range-filter"> <dc:context> <dc:statement> SELECT id AS out_id FROM outs WHERE artifact_id = ${a_id} AND name = 'longitudinal_section' </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} ORDER BY num ASC, name DESC </dc:statement> <longitudinal_section_columns description="{$river} {$a_creation}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="winfo"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="longitudinal_section"/> </dc:element> </dc:for-each> </longitudinal_section_columns> </dc:context> </dc:for-each> </dc:context> </dc:call-macro> </dc:context> </dc:for-each> </waterlevels> </dc:macro> <dc:macro name="longitudinal-section"> <waterlevels> <dc:for-each> <dc:context> <dc:call-macro name="range-filter"> <dc:context> <dc:statement> SELECT id AS out_id FROM outs WHERE artifact_id = ${a_id} AND name = 'fix_longitudinal_section_curve' </dc:statement> <dc:for-each> <dc:context> <dc:comment><!-- average und deviation ls_0 . ls_1 ...--></dc:comment> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} AND ( name LIKE 'fix_deviation_ls%' OR name LIKE 'fix_sector_average_ls%' OR name LIKE 'fix_analysis_events_ls%' OR name LIKE 'fix_reference_events_ls%' ) ORDER BY num ASC, name DESC </dc:statement> <waterlevels description="{$river} {$a_creation} {$collection_name}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="fixanalysis"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="fix_longitudinal_section_curve"/> </dc:element> </dc:for-each> </waterlevels> </dc:context> </dc:for-each> </dc:context> </dc:call-macro> </dc:context> </dc:for-each> </waterlevels> </dc:macro> <dc:macro name="delta-wt"> <waterlevels> <dc:for-each> <dc:context> <dc:call-macro name="range-filter"> <dc:context> <dc:statement> SELECT id AS out_id FROM outs WHERE artifact_id = ${a_id} AND name = 'fix_deltawt_curve' </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} and ( name LIKE 'fix_sector_average_dwt%' OR name LIKE 'fix_deviation_dwt%' OR name = 'fix_analysis_events_dwt' OR name = 'fix_reference_events_dwt' OR name = 'fix_analysis_periods_dwt' ) ORDER BY num ASC, name DESC </dc:statement> <waterlevels description="{$river} {$a_creation} {$collection_name}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="fixanalysis"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="fix_deltawt_curve"/> </dc:element> </dc:for-each> </waterlevels> </dc:context> </dc:for-each> </dc:context> </dc:call-macro> </dc:context> </dc:for-each> </waterlevels> </dc:macro> <dc:macro name="delta-wt-ls"> <waterlevels> <dc:for-each> <dc:context> <dc:call-macro name="range-filter"> <dc:context> <dc:statement> SELECT id AS out_id FROM outs WHERE artifact_id = ${a_id} AND name = 'fix_deltawt_curve' </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} and ( name LIKE 'fix_sector_average_dwt%' OR name LIKE 'fix_deviation_dwt%') ORDER BY num ASC, name DESC </dc:statement> <waterlevels description="{$river} {$a_creation} {$collection_name}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="fixanalysis"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="fix_deltawt_curve"/> </dc:element> </dc:for-each> </waterlevels> </dc:context> </dc:for-each> </dc:context> </dc:call-macro> </dc:context> </dc:for-each> </waterlevels> </dc:macro> <dc:macro name="fix-derivate-curve"> <waterlevels> <dc:for-each> <dc:context> <dc:call-macro name="range-filter"> <dc:context> <dc:statement> SELECT id AS out_id FROM outs WHERE artifact_id = ${a_id} AND name = 'fix_derivate_curve' </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} and name = 'fix_derivate_curve' ORDER BY num ASC, name DESC </dc:statement> <waterlevels description="{$river} {$a_creation} {$collection_name}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="fixanalysis"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="fix_derivate_curve"/> </dc:element> </dc:for-each> </waterlevels> </dc:context> </dc:for-each> </dc:context> </dc:call-macro> </dc:context> </dc:for-each> </waterlevels> </dc:macro> <dc:macro name="fix-wq-curve"> <waterlevels> <dc:for-each> <dc:context> <dc:call-macro name="range-filter"> <dc:context> <dc:statement> SELECT id AS out_id FROM outs WHERE artifact_id = ${a_id} AND name = 'fix_wq_curve' </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} and ( name LIKE 'fix_sector_average_wq%' OR name = 'fix_wq_curve' OR name LIKE 'fix_analysis_events_wq%' OR name LIKE 'fix_reference_events_wq%' ) ORDER BY num ASC, name DESC </dc:statement> <waterlevels description="{$river} {$a_creation} {$collection_name}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="fixanalysis"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="fix_wq_curve"/> </dc:element> </dc:for-each> </waterlevels> </dc:context> </dc:for-each> </dc:context> </dc:call-macro> </dc:context> </dc:for-each> </waterlevels> </dc:macro> <dc:macro name="duration-curve"> <computed_discharge_curves> <dc:for-each> <dc:context> <dc:call-macro name="range-filter"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE (f.name = 'duration_curve.q' OR f.name = 'duration_curve.w') AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="factory" value="winfo"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="ids" value="${aid}"/> <dc:attribute name="out" value="duration_curve"/> </dc:element> </dc:for-each> </dc:context> </dc:call-macro> </dc:context> </dc:for-each> </computed_discharge_curves> </dc:macro> <dc:comment> WATERLEVELS - ONLY SHOW Ws </dc:comment> <dc:comment><!-- TODO doesnt work nicely for fix/wq-diags. --></dc:comment> <dc:macro name="waterlevels-fix"> <waterlevels> <dc:for-each> <dc:context> <dc:call-macro name="range-filter"> <dc:context> <dc:statement> SELECT id AS out_id FROM outs WHERE artifact_id = ${a_id} AND name = 'longitudinal_section' </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} and name = 'longitudinal_section.w' ORDER BY num ASC, name DESC </dc:statement> <waterlevels description="{$river} {$a_creation} {$collection_name}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="winfo"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="longitudinal_section"/> </dc:element> </dc:for-each> </waterlevels> </dc:context> </dc:for-each> </dc:context> </dc:call-macro> </dc:context> </dc:for-each> </waterlevels> </dc:macro> <dc:comment> SHOW FLOODMAPS </dc:comment> <dc:macro name="flood-map"> <floodmap> <dc:for-each> <dc:context> <dc:call-macro name="range-filter"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE f.name = 'floodmap.wsplgen' AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="factory" value="winfo"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="ids" value="${aid}"/> <dc:attribute name="out" value="floodmap"/> </dc:element> </dc:for-each> </dc:context> </dc:call-macro> </dc:context> </dc:for-each> </floodmap> </dc:macro> <dc:comment> MINFO bedheight middle </dc:comment> <dc:macro name="floodmap-hws-user"> <dc:context> <dc:statement> SELECT id AS out_id FROM outs WHERE artifact_id = ${a_id} AND name = 'floodmap' </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} AND name = 'floodmap.usershape' ORDER BY num ASC, name DESC </dc:statement> <own-hws> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="winfo"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="floodmap"/> </dc:element> </dc:for-each> </own-hws> </dc:context> </dc:for-each> </dc:context> </dc:macro> <dc:macro name="bedquality-bed"> <bed_quality_bed> <dc:for-each> <dc:context> <dc:call-macro name="range-filter"> <dc:context> <dc:statement> SELECT id AS oid FROM outs AS o WHERE o.artifact_id = ${a_id} AND o.name='bed_longitudinal_section' </dc:statement> <dc:for-each> <quality-bed description="{$river} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE (f.name = 'bed_longitudinal_section.bed_diameter_toplayer' OR f.name = 'bed_longitudinal_section.bed_diameter_sublayer') AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="out" value="bed_longitudinal_section"/> </dc:element> </dc:for-each> </dc:context> </quality-bed> </dc:for-each> </dc:context> </dc:call-macro> </dc:context> </dc:for-each> </bed_quality_bed> </dc:macro> <dc:macro name="bedquality-load"> <bed_quality_load> <dc:for-each> <dc:context> <dc:call-macro name="range-filter"> <dc:context> <dc:statement> SELECT id AS oid FROM outs AS o WHERE o.artifact_id = ${a_id} AND o.name='bed_longitudinal_section' </dc:statement> <dc:for-each> <quality-load description="{$river} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE f.name = 'bed_longitudinal_section.bedload_diameter' AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="out" value="bed_longitudinal_section"/> </dc:element> </dc:for-each> </dc:context> </quality-load> </dc:for-each> </dc:context> </dc:call-macro> </dc:context> </dc:for-each> </bed_quality_load> </dc:macro> <dc:macro name="bedquality-density"> <bed_quality_density> <dc:for-each> <dc:context> <dc:call-macro name="range-filter"> <dc:context> <dc:statement> SELECT id AS oid FROM outs AS o WHERE o.artifact_id = ${a_id} AND o.name='bed_longitudinal_section' </dc:statement> <dc:for-each> <density description="{$river} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE (f.name = 'bed_longitudinal_section.sediment_density_toplayer' OR f.name = 'bed_longitudinal_section.sediment_density_sublayer') AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="out" value="bed_longitudinal_section"/> </dc:element> </dc:for-each> </dc:context> </density> </dc:for-each> </dc:context> </dc:call-macro> </dc:context> </dc:for-each> </bed_quality_density> </dc:macro> <dc:macro name="bedquality-porosity"> <bed_quality_porosity> <dc:for-each> <dc:context> <dc:call-macro name="range-filter"> <dc:context> <dc:statement> SELECT id AS oid FROM outs AS o WHERE o.artifact_id = ${a_id} AND o.name='bed_longitudinal_section' </dc:statement> <dc:for-each> <porosity description="{$river} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE (f.name = 'bed_longitudinal_section.porosity_toplayer' OR f.name = 'bed_longitudinal_section.porosity_sublayer') AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="out" value="bed_longitudinal_section"/> </dc:element> </dc:for-each> </dc:context> </porosity> </dc:for-each> </dc:context> </dc:call-macro> </dc:context> </dc:for-each> </bed_quality_porosity> </dc:macro> <dc:macro name="flow-velocity"> <flow-velocity> <dc:for-each> <dc:context> <dc:call-macro name="range-filter"> <dc:context> <dc:statement> SELECT id AS oid FROM outs AS o WHERE o.artifact_id = ${a_id} and o.name='flow_velocity' </dc:statement> <dc:for-each> <flow description="{$river} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE (f.name = 'flow_velocity.totalchannel' OR f.name = 'flow_velocity.mainchannel' OR f.name = 'flow_velocity.totalchannel.filtered' OR f.name = 'flow_velocity.mainchannel.filtered') AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="out" value="flow_velocity"/> </dc:element> </dc:for-each> </dc:context> </flow> </dc:for-each> </dc:context> </dc:call-macro> </dc:context> </dc:for-each> </flow-velocity> </dc:macro> <dc:macro name="sediment-load"> <sediment-load> <dc:for-each> <dc:context> <dc:call-macro name="range-filter"> <dc:context> <dc:statement> SELECT id AS oid FROM outs AS o WHERE o.artifact_id = ${a_id} and o.name='sedimentload_ls' </dc:statement> <dc:for-each> <load description="{$river} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE f.name LIKE 'sedimentload%' AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="out" value="sedimentload_ls"/> </dc:element> </dc:for-each> </dc:context> </load> </dc:for-each> </dc:context> </dc:call-macro> </dc:context> </dc:for-each> </sediment-load> </dc:macro> <dc:macro name="bedheight-differences"> <bedheight-differences> <dc:for-each> <dc:context> <dc:call-macro name="range-filter"> <dc:context> <dc:statement> SELECT id AS oid, name AS o_name FROM outs AS o WHERE o.artifact_id = ${a_id} AND (o.name = 'bed_difference_year' OR o.name = 'bed_differnece_epoch') </dc:statement> <dc:for-each> <difference description="{$river} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE (f.name LIKE 'bedheight_difference.year%' OR f.name LIKE 'bedheight_difference.epoch%') AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:choose> <dc:when test="dc:contains($o_name, 'bed_difference_year')"> <dc:attribute name="out" value="bed_difference_year"/> </dc:when> <dc:otherwise> <dc:attribute name="out" value="bed_difference_epoch"/> </dc:otherwise> </dc:choose> </dc:element> </dc:for-each> </dc:context> </difference> </dc:for-each> </dc:context> </dc:call-macro> </dc:context> </dc:for-each> </bedheight-differences> </dc:macro> <dc:macro name="waterlevels-discharge"> <waterlevels-discharge> <dc:for-each> <dc:context> <dc:call-macro name="range-filter"> <dc:context> <dc:statement> SELECT id AS oid FROM outs AS o WHERE o.artifact_id = ${a_id} AND o.name = 'discharge_longitudinal_section' </dc:statement> <dc:for-each> <discharge description="{$oid} {$river} {$a_id} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE f.name = 'discharge_longitudinal_section.w' AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="winfo"/> <!-- <dc:attribute name="out" value="${out}"/>--> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="out" value="longitudinal_section"/> </dc:element> </dc:for-each> </dc:context> </discharge> </dc:for-each> </dc:context> </dc:call-macro> </dc:context> </dc:for-each> </waterlevels-discharge> </dc:macro> <dc:iterate var="out" container="artifact-outs"> <dc:choose> <dc:when test="$out = 'longitudinal_section'"> <dc:call-macro name="longitudinal"/> <dc:call-macro name="differences"/> <dc:call-macro name="officiallines_user"/> </dc:when> <dc:when test="$out = 'discharge_longitudinal_section'"> <dc:call-macro name="longitudinal"/> <dc:call-macro name="differences"/> </dc:when> <dc:when test="$out = 'w_differences'"> <dc:call-macro name="longitudinal"/> <dc:call-macro name="differences"/> </dc:when> <dc:when test="$out = 'fix_deltawt_curve'"> <dc:call-macro name="delta-wt"/> </dc:when> <dc:when test="$out = 'reference_curve'"> <dc:call-macro name="reference-curves"/> </dc:when> <dc:when test="$out = 'computed_discharge_curve'"> <dc:call-macro name="computed-discharge-curve"/> </dc:when> <dc:when test="$out = 'cross_section'"> <dc:call-macro name="waterlevels"/> </dc:when> <dc:when test="$out = 'fix_longitudinal_section_curve'"> <dc:call-macro name="longitudinal-section"/> </dc:when> <dc:when test="$out = 'fix_derivate_curve'"> <dc:call-macro name="fix-derivate-curve"/> </dc:when> <dc:when test="$out = 'fix_wq_curve'"> <dc:call-macro name="fix-wq-curve"/> </dc:when> <dc:when test="$out = 'duration_curve'"> <dc:call-macro name="duration-curve"/> </dc:when> <dc:when test="$out = 'waterlevels'"> <!-- base data --> <dc:call-macro name="basedata_0"/> <!-- extra-longitudinal-sections --> <dc:call-macro name="basedata_1_additionals"/> <!-- fixations --> <dc:call-macro name="basedata_2_fixations"/> <!-- flood water marks--> <dc:call-macro name="basedata_4_heightmarks-points"/> <!-- flood protection --> <dc:call-macro name="basedata_5_flood-protections"/> <dc:call-macro name="waterlevels-fix"/> </dc:when> <dc:when test="$out = 'fix_wq_curve'"> <dc:call-macro name="waterlevels-fix"/> </dc:when> <dc:when test="$out = 'floodmap'"> <dc:call-macro name="flood-map"/> </dc:when> <dc:when test="$out = 'map'"> <dc:call-macro name="flood-map"/> </dc:when> <dc:when test="$out = 'bedheight_middle'"> <dc:call-macro name="waterlevels-discharge"/> <dc:call-macro name="waterlevels-fix"/> </dc:when> <dc:when test="$out = 'floodmap-hws'"> <dc:call-macro name="floodmap-hws-user"/> </dc:when> <dc:when test="$out = 'flow_velocity'"> <dc:call-macro name="bedquality-bed"/> <dc:call-macro name="bedquality-load"/> </dc:when> <dc:when test="$out = 'bed_longitudinal_section'"> <dc:call-macro name="bedquality-bed"/> <dc:call-macro name="bedquality-load"/> <dc:call-macro name="bedquality-density"/> <dc:call-macro name="bedquality-porosity"/> </dc:when> <dc:when test="$out = 'sedimentload_ls'"> <dc:call-macro name="differences"/> <dc:call-macro name="bedheight-differences"/> <dc:call-macro name="flow-velocity"/> <dc:call-macro name="sediment-load"/> </dc:when> <dc:when test="$out = 'bed_difference_year'"> <dc:call-macro name="waterlevels-discharge"/> <dc:call-macro name="bedheight-differences"/> <dc:call-macro name="differences"/> <dc:call-macro name="waterlevels-fix"/> <dc:call-macro name="delta-wt-ls"/> </dc:when> <dc:when test="$out = 'bed_difference_epoch'"> <dc:call-macro name="waterlevels-discharge"/> <dc:call-macro name="bedheight-differences"/> <dc:call-macro name="differences"/> <dc:call-macro name="waterlevels-fix"/> <dc:call-macro name="delta-wt-ls"/> </dc:when> </dc:choose> </dc:iterate> </dc:context> </dc:call-macro> </old_calculations> <dc:if test="dc:contains($parameters,'load-system')"> <dc:comment> Include System specific part when 'load-system' is in parameters. ----------------------------------------------------------------- </dc:comment> <dc:call-macro name="load-system"/> </dc:if> </dc:when> <dc:otherwise> <dc:comment> Include System specific part only if no user ID is given. --------------------------------------------------------- </dc:comment> <dc:call-macro name="load-system"/> </dc:otherwise> </dc:choose> </datacage> </dc:template>