Mercurial > dive4elements > river
view artifacts/doc/conf/meta-data.xml @ 6059:5f52a8079625
Get location limits from fixation overview in fixation location selection
Part of issue 1277
| author | Andre Heinecke <aheinecke@intevation.de> |
|---|---|
| date | Wed, 22 May 2013 13:03:10 +0200 |
| parents | 5db238b0176e |
| children | dcbc06ca5d19 |
line wrap: on
line source
<?xml version="1.0" encoding="UTF-8"?> <dc:template xmlns:dc="http://www.intevation.org/2011/Datacage"> <datacage> <dc:comment> User specific part ------------------ </dc:comment> <dc:if test="dc:contains($parameters, 'user-id') and not(dc:contains($artifact-outs, 'floodmap-hws'))"> <dc:call-macro name="load-user"/> </dc:if> <dc:call-macro name="load-system"/> <dc:macro name="load-system"> <dc:context connection="system"> <dc:statement> SELECT id AS river_id, name AS river_name FROM rivers WHERE lower(name) LIKE lower(${river}) </dc:statement> <dc:for-each> <dc:call-macro name="generate-system-content"/> </dc:for-each> </dc:context> </dc:macro> <dc:macro name="load-user"> <old_calculations> <dc:call-macro name="generate-user-content"/> </old_calculations> </dc:macro> <dc:macro name="generate-system-content"> <dc:call-macro name="user-range"> <dc:call-macro name="km-filtered-wsts"> <dc:choose> <dc:when test="dc:contains($parameters, 'recommended')"> <dc:comment> Recommendations (client shall load immediately). </dc:comment> <dc:iterate var="out" container="artifact-outs"> <dc:choose> <dc:when test="$out = 'w_differences'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'discharge_longitudinal_section'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'historical_discharge_wq'"> <dc:call-macro name="mainvalues"/> </dc:when> <dc:when test="$out = 'cross_section'"> <dc:call-macro name="cross_sections"/> <dc:call-macro name="hyks"/> </dc:when> <dc:when test="$out = 'discharge_curve'"> <dc:call-macro name="mainvalues"/> </dc:when> <dc:when test="$out = 'computed_discharge_curve'"> <dc:call-macro name="mainvalues"/> <dc:call-macro name="basedata_2_fixations_wqkms"/> </dc:when> <dc:when test="$out = 'duration_curve'"> <dc:call-macro name="mainvalues"/> </dc:when> <dc:when test="$out = 'reference_curve'"> <dc:call-macro name="annotations"/> <dc:call-macro name="mainvalues"/> </dc:when> <dc:when test="$out = 'fix_wq_curve'"> <dc:call-macro name="mainvalues"/> <dc:call-macro name="qsectors"/> </dc:when> <dc:when test="$out = 'longitudinal_section'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'fix_longitudinal_section_curve'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'bed_difference_epoch'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'bed_difference_year'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'bed_difference_height_year'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'floodmap'"> <dc:call-macro name="flood-map-recommended"/> </dc:when> <dc:when test="$out = 'floodmap-hws'"> <dc:call-macro name="flood-map-recommended"/> </dc:when> <dc:when test="$out = 'minfo-heights'"> <dc:call-macro name="minfo-heights"/> </dc:when> <dc:when test="$out = 'minfo-heights-epoch'"> <bedheights> <dc:call-macro name="bed-heights-epoch"/> </bedheights> </dc:when> </dc:choose> </dc:iterate> </dc:when> <dc:otherwise> <dc:comment> Non - Recommendations. </dc:comment> <dc:iterate var="out" container="artifact-outs"> <dc:choose> <dc:when test="$out = 'cross_section'"> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_2_fixations"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="basedata_4_heightmarks-points"/> <dc:call-macro name="cross_sections"/> <dc:call-macro name="hyks"/> </dc:when> <dc:when test="$out = 'longitudinal_section'"> <dc:call-macro name="longitudinal-section-prototype"/> </dc:when> <dc:when test="$out = 'w_differences'"> <dc:call-macro name="longitudinal-section-prototype"/> </dc:when> <dc:when test="$out = 'discharge_longitudinal_section'"> <dc:call-macro name="longitudinal-section-prototype"/> </dc:when> <dc:when test="$out = 'discharge_curve'"> <dc:call-macro name="mainvalues"/> </dc:when> <dc:when test="$out = 'duration_curve'"> <dc:call-macro name="mainvalues"/> <dc:call-macro name="basedata_2_fixations_relative_point"/> <dc:call-macro name="basedata_4_heightmarks-points-relative_points"/> <dc:call-macro name="basedata_5_flood-protections_relative_points"/> </dc:when> <dc:when test="$out = 'reference_curve'"> <dc:call-macro name="mainvalues"/> <dc:call-macro name="annotations"/> <dc:call-macro name="basedata_1_additionals-relative_point"/> <dc:call-macro name="basedata_2_fixations_relative_point"/> <dc:call-macro name="basedata_4_heightmarks-points-relative_points"/> <dc:call-macro name="basedata_5_flood-protections_relative_points"/> </dc:when> <dc:when test="$out = 'fix_wq_curve'"> <dc:call-macro name="basedata_0_wq"/> <dc:call-macro name="basedata_1_additionals_marks"/> <dc:call-macro name="basedata_2_fixations_wqkms"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="basedata_4_heightmarks-points"/> <dc:call-macro name="basedata_5_flood-protections_relative_points"/> <dc:call-macro name="discharge_table_gauge"/> <dc:call-macro name="discharge_fix_wq"/> </dc:when> <dc:when test="$out = 'fix_longitudinal_section_curve'"> <dc:call-macro name="annotations"/> </dc:when> <dc:when test="$out = 'map'"> <dc:call-macro name="flood-map-complete"/> </dc:when> <dc:when test="$out = 'flow_velocity'"> <dc:call-macro name="annotations_per_type"/> <dc:call-macro name="flow_velocity_measurements"/> </dc:when> <dc:when test="$out = 'bed_longitudinal_section'"> <dc:call-macro name="annotations_per_type"/> </dc:when> <dc:when test="$out = 'sedimentload_ls'"> <dc:call-macro name="annotations_per_type"/> <dc:call-macro name="morph_width"/> </dc:when> <dc:when test="$out = 'bedheight_middle'"> <dc:call-macro name="sounding-width"/> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_2_fixations"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="annotations_per_type"/> </dc:when> <dc:when test="$out = 'bed_difference_year'"> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_2_fixations"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="annotations_per_type"/> <dc:call-macro name="morph_width"/> </dc:when> <dc:when test="$out = 'bed_difference_epoch'"> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_2_fixations"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="annotations_per_type"/> <dc:call-macro name="morph_width"/> </dc:when> <dc:when test="$out = 'floodmap'"> <dc:choose> <dc:when test="dc:contains($parameters, 'dem')"> <dc:call-macro name="flood-map-dem"/> </dc:when> <dc:when test="dc:contains($parameters, 'hws')"> <hws> <dc:call-macro name="flood-map-hws-lines"/> <dc:call-macro name="flood-map-hws-points"/> </hws> </dc:when> <dc:otherwise> <dc:call-macro name="flood-map-complete"/> </dc:otherwise> </dc:choose> </dc:when> <dc:when test="$out = 'floodmap-hws'"> <dc:choose> <dc:when test="dc:contains($parameters, 'dem')"> <dc:call-macro name="flood-map-dem"/> </dc:when> <dc:when test="dc:contains($parameters, 'hws')"> <hws> <dc:call-macro name="flood-map-hws-lines"/> <dc:call-macro name="flood-map-hws-points"/> </hws> </dc:when> <dc:otherwise> <dc:call-macro name="flood-map-complete"/> </dc:otherwise> </dc:choose> </dc:when> <dc:when test="$out = 'computed_discharge_curve'"> <dc:call-macro name="discharge_computed"/> <dc:call-macro name="basedata_2_fixations_wqkms"/> <dc:call-macro name="basedata_5_flood-protections"/> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_4_heightmarks-points"/> <computed_discharge_curve> <dc:call-macro name="mainvalues"/> </computed_discharge_curve> </dc:when> <dc:when test="$out = 'minfo-heights'"> <dc:call-macro name="minfo-heights"/> <dc:macro name="minfo-heights"> <bedheights> <dc:call-macro name="bed-heights-single"/> <dc:call-macro name="bed-heights-epoch"/> </bedheights> </dc:macro> </dc:when> <dc:when test="$out = 'minfo-heights-epoch'"> <bedheights> <dc:call-macro name="bed-heights-epoch"/> </bedheights> </dc:when> </dc:choose> </dc:iterate> </dc:otherwise> </dc:choose> </dc:call-macro> </dc:call-macro> </dc:macro> <dc:macro name="generate-user-content"> <dc:call-macro name="km-filtered-userdata"> <dc:iterate var="out" container="artifact-outs"> <dc:choose> <dc:when test="$out = 'longitudinal_section'"> <dc:call-macro name="longitudinal"/> <dc:call-macro name="differences"/> <dc:call-macro name="officiallines_user"/> </dc:when> <dc:when test="$out = 'discharge_longitudinal_section'"> <dc:call-macro name="longitudinal"/> <dc:call-macro name="differences"/> </dc:when> <dc:when test="$out = 'w_differences'"> <dc:call-macro name="longitudinal"/> <dc:call-macro name="differences"/> </dc:when> <dc:when test="$out = 'fix_deltawt_curve'"> <dc:call-macro name="delta-wt"/> </dc:when> <dc:when test="$out = 'reference_curve'"> <dc:call-macro name="reference-curves"/> </dc:when> <dc:when test="$out = 'computed_discharge_curve'"> <dc:call-macro name="computed-discharge-curve"/> </dc:when> <dc:when test="$out = 'cross_section'"> <dc:call-macro name="waterlevels"/> </dc:when> <dc:when test="$out = 'fix_longitudinal_section_curve'"> <dc:call-macro name="longitudinal-section"/> </dc:when> <dc:when test="$out = 'fix_derivate_curve'"> <dc:call-macro name="fix-derivate-curve"/> </dc:when> <dc:when test="$out = 'fix_wq_curve'"> <dc:call-macro name="fix-wq-curve"/> </dc:when> <dc:when test="$out = 'duration_curve'"> <dc:call-macro name="duration-curve"/> </dc:when> <dc:when test="$out = 'waterlevels'"> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_2_fixations"/> <dc:call-macro name="basedata_4_heightmarks-points"/> <dc:call-macro name="basedata_5_flood-protections"/> <dc:call-macro name="waterlevels-fix"/> </dc:when> <dc:when test="$out = 'fix_wq_curve'"> <dc:call-macro name="waterlevels-fix"/> </dc:when> <dc:when test="$out = 'floodmap'"> <dc:call-macro name="flood-map"/> </dc:when> <dc:when test="$out = 'map'"> <dc:call-macro name="flood-map"/> </dc:when> <dc:when test="$out = 'bedheight_middle'"> <dc:call-macro name="waterlevels-discharge"/> <dc:call-macro name="waterlevels-fix"/> </dc:when> <dc:when test="$out = 'floodmap-hws'"> <dc:call-macro name="floodmap-hws-user"/> </dc:when> <dc:when test="$out = 'flow_velocity'"> <dc:call-macro name="bedquality-bed"/> <dc:call-macro name="bedquality-load"/> </dc:when> <dc:when test="$out = 'bed_longitudinal_section'"> <dc:call-macro name="bedquality-bed"/> <dc:call-macro name="bedquality-load"/> <dc:call-macro name="bedquality-density"/> <dc:call-macro name="bedquality-porosity"/> </dc:when> <dc:when test="$out = 'sedimentload_ls'"> <dc:call-macro name="differences"/> <dc:call-macro name="bedheight-differences"/> <dc:call-macro name="flow-velocity"/> <dc:call-macro name="sediment-load"/> </dc:when> <dc:when test="$out = 'bed_difference_year'"> <dc:call-macro name="waterlevels-discharge"/> <dc:call-macro name="bedheight-differences"/> <dc:call-macro name="differences"/> <dc:call-macro name="waterlevels-fix"/> <dc:call-macro name="delta-wt-ls"/> </dc:when> <dc:when test="$out = 'bed_difference_epoch'"> <dc:call-macro name="waterlevels-discharge"/> <dc:call-macro name="bedheight-differences"/> <dc:call-macro name="differences"/> <dc:call-macro name="waterlevels-fix"/> <dc:call-macro name="delta-wt-ls"/> </dc:when> </dc:choose> </dc:iterate> </dc:call-macro> </dc:macro> <!-- Macros to load user data --> <dc:macro name="select-facets"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM artifacts a JOIN outs o ON o.artifact_id = a.id JOIN facets f ON f.out_id = o.id WHERE a.id = ${a_id} AND f.name = ${facet_type} </dc:statement> <dc:if test="dc:has-result()"> <dc:macro-body/> </dc:if> </dc:context> </dc:macro> <dc:macro name="differences"> <dc:variable name="facet_type" value="w_differences"/> <dc:call-macro name="select-facets"> <differences> <dc:for-each> <w_differences description="{$facet_description}" factory="winfo" artifact-id="{$aid}" ids="{$aid}" out="w_differences"/> </dc:for-each> </differences> </dc:call-macro> </dc:macro> <dc:macro name="reference-curves"> <dc:variable name="facet_type" value="reference_curve"/> <dc:call-macro name="select-facets"> <reference_curves> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="ids" value="${aid}"/> <dc:attribute name="out" value="reference_curve"/> </dc:element> </dc:for-each> </reference_curves> </dc:call-macro> </dc:macro> <dc:macro name="computed-discharge-curve"> <dc:variable name="facet_type" value="computed_discharge_curve.q"/> <dc:call-macro name="select-facets"> <computed_discharge_curves> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="ids" value="${aid}"/> <dc:attribute name="out" value="computed_discharge_curve"/> </dc:element> </dc:for-each> </computed_discharge_curves> </dc:call-macro> </dc:macro> <dc:macro name="flood-map"> <dc:variable name="facet_type" value="floodmap.wsplgen"/> <dc:call-macro name="select-facets"> <floodmap> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="ids" value="${aid}"/> <dc:attribute name="out" value="floodmap"/> </dc:element> </dc:for-each> </floodmap> </dc:call-macro> </dc:macro> <dc:macro name="waterlevels"> <dc:context> <dc:statement> SELECT id AS out_id FROM outs WHERE artifact_id = ${a_id} AND name = 'cross_section' </dc:statement> <dc:if test="dc:has-result()"> <waterlevels> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} ORDER BY num ASC, name DESC </dc:statement> <longitudinal_section_columns description="{$river} {$a_creation}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="cross_section"/> </dc:element> </dc:for-each> </longitudinal_section_columns> </dc:context> </dc:for-each> </waterlevels> </dc:if> </dc:context> </dc:macro> <dc:macro name="longitudinal"> <dc:context> <dc:statement> SELECT id AS out_id FROM outs WHERE artifact_id = ${a_id} AND name = 'longitudinal_section' </dc:statement> <dc:if test="dc:has-result()"> <waterlevels> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} ORDER BY num ASC, name DESC </dc:statement> <longitudinal_section_columns description="{$river} {$a_creation}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="longitudinal_section"/> </dc:element> </dc:for-each> </longitudinal_section_columns> </dc:context> </dc:for-each> </waterlevels> </dc:if> </dc:context> </dc:macro> <dc:macro name="longitudinal-section"> <dc:context> <dc:statement> SELECT id AS out_id FROM outs WHERE artifact_id = ${a_id} AND name = 'fix_longitudinal_section_curve' </dc:statement> <dc:if test="dc:has-result()"> <waterlevels> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} AND ( name LIKE 'fix_deviation_ls%' OR name LIKE 'fix_sector_average_ls%' OR name LIKE 'fix_analysis_events_ls%' OR name LIKE 'fix_reference_events_ls%') ORDER BY num ASC, name DESC </dc:statement> <waterlevels description="{$river} {$a_creation} {$collection_name}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="fixanalysis"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="fix_longitudinal_section_curve"/> </dc:element> </dc:for-each> </waterlevels> </dc:context> </dc:for-each> </waterlevels> </dc:if> </dc:context> </dc:macro> <dc:macro name="delta-wt"> <dc:context> <dc:statement> SELECT id AS out_id FROM outs WHERE artifact_id = ${a_id} AND name = 'fix_deltawt_curve' </dc:statement> <dc:if test="dc:has-result()"> <waterlevels> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} and ( name LIKE 'fix_sector_average_dwt%' OR name LIKE 'fix_deviation_dwt%' OR name = 'fix_analysis_events_dwt' OR name = 'fix_reference_events_dwt' OR name = 'fix_analysis_periods_dwt') ORDER BY num ASC, name DESC </dc:statement> <waterlevels description="{$river} {$a_creation} {$collection_name}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="fixanalysis"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="fix_deltawt_curve"/> </dc:element> </dc:for-each> </waterlevels> </dc:context> </dc:for-each> </waterlevels> </dc:if> </dc:context> </dc:macro> <dc:macro name="delta-wt-ls"> <dc:context> <dc:statement> SELECT id AS out_id FROM outs WHERE artifact_id = ${a_id} AND name = 'fix_deltawt_curve' </dc:statement> <dc:if test="dc:has-result()"> <waterlevels> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} and ( name LIKE 'fix_sector_average_dwt%' OR name LIKE 'fix_deviation_dwt%') ORDER BY num ASC, name DESC </dc:statement> <waterlevels description="{$river} {$a_creation} {$collection_name}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="fixanalysis"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="fix_deltawt_curve"/> </dc:element> </dc:for-each> </waterlevels> </dc:context> </dc:for-each> </waterlevels> </dc:if> </dc:context> </dc:macro> <dc:macro name="fix-derivate-curve"> <dc:context> <dc:statement> SELECT id AS out_id FROM outs WHERE artifact_id = ${a_id} AND name = 'fix_derivate_curve' </dc:statement> <dc:if test="dc:has-result()"> <waterlevels> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} and name = 'fix_derivate_curve' ORDER BY num ASC, name DESC </dc:statement> <waterlevels description="{$river} {$a_creation} {$collection_name}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="fixanalysis"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="fix_derivate_curve"/> </dc:element> </dc:for-each> </waterlevels> </dc:context> </dc:for-each> </waterlevels> </dc:if> </dc:context> </dc:macro> <dc:macro name="fix-wq-curve"> <dc:context> <dc:statement> SELECT id AS out_id FROM outs WHERE artifact_id = ${a_id} AND name = 'fix_wq_curve' </dc:statement> <dc:if test="dc:has-result()"> <waterlevels> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} and ( name LIKE 'fix_sector_average_wq%' OR name = 'fix_wq_curve' OR name LIKE 'fix_analysis_events_wq%' OR name LIKE 'fix_reference_events_wq%' ) ORDER BY num ASC, name DESC </dc:statement> <waterlevels description="{$river} {$a_creation} {$collection_name}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="fixanalysis"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="fix_wq_curve"/> </dc:element> </dc:for-each> </waterlevels> </dc:context> </dc:for-each> </waterlevels> </dc:if> </dc:context> </dc:macro> <dc:macro name="duration-curve"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE (f.name = 'duration_curve.q' OR f.name = 'duration_curve.w') AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:if test="dc:has-result()"> <computed_discharge_curves> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="ids" value="${aid}"/> <dc:attribute name="out" value="duration_curve"/> </dc:element> </dc:for-each> </computed_discharge_curves> </dc:if> </dc:context> </dc:macro> <dc:comment>TODO doesnt work nicely for fix/wq-diags.</dc:comment> <dc:macro name="waterlevels-fix"> <dc:context> <dc:statement> SELECT id AS out_id FROM outs WHERE artifact_id = ${a_id} AND name = 'longitudinal_section' </dc:statement> <dc:if test="dc:has-result()"> <waterlevels> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} and name = 'longitudinal_section.w' ORDER BY num ASC, name DESC </dc:statement> <waterlevels description="{$river} {$a_creation} {$collection_name}"> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="longitudinal_section"/> </dc:element> </dc:for-each> </waterlevels> </dc:context> </dc:for-each> </waterlevels> </dc:if> </dc:context> </dc:macro> <dc:macro name="floodmap-hws-user"> <dc:context> <dc:statement> SELECT id AS out_id FROM outs WHERE artifact_id = ${a_id} AND name = 'floodmap' </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT name AS facet_name, num AS facet_num, description AS facet_description FROM facets WHERE out_id = ${out_id} AND name = 'floodmap.usershape' ORDER BY num ASC, name DESC </dc:statement> <own-hws> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}"/> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="artifact-id" value="${a_gid}"/> <dc:attribute name="out" value="floodmap"/> </dc:element> </dc:for-each> </own-hws> </dc:context> </dc:for-each> </dc:context> </dc:macro> <dc:macro name="bedquality-bed"> <dc:context> <dc:statement> SELECT id AS oid FROM outs AS o WHERE o.artifact_id = ${a_id} AND o.name='bed_longitudinal_section' </dc:statement> <dc:if test="dc:has-result()"> <bed_quality_bed> <dc:for-each> <quality-bed description="{$river} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE (f.name = 'bed_longitudinal_section.bed_diameter_toplayer' OR f.name = 'bed_longitudinal_section.bed_diameter_sublayer') AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="out" value="bed_longitudinal_section"/> </dc:element> </dc:for-each> </dc:context> </quality-bed> </dc:for-each> </bed_quality_bed> </dc:if> </dc:context> </dc:macro> <dc:macro name="bedquality-load"> <dc:context> <dc:statement> SELECT id AS oid FROM outs AS o WHERE o.artifact_id = ${a_id} AND o.name='bed_longitudinal_section' </dc:statement> <dc:if test="dc:has-result()"> <bed_quality_load> <dc:for-each> <quality-load description="{$river} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE f.name = 'bed_longitudinal_section.bedload_diameter' AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="out" value="bed_longitudinal_section"/> </dc:element> </dc:for-each> </dc:context> </quality-load> </dc:for-each> </bed_quality_load> </dc:if> </dc:context> </dc:macro> <dc:macro name="bedquality-density"> <dc:context> <dc:statement> SELECT id AS oid FROM outs AS o WHERE o.artifact_id = ${a_id} AND o.name='bed_longitudinal_section' </dc:statement> <dc:if test="dc:has-result()"> <bed_quality_density> <dc:for-each> <density description="{$river} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE (f.name = 'bed_longitudinal_section.sediment_density_toplayer' OR f.name = 'bed_longitudinal_section.sediment_density_sublayer') AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="out" value="bed_longitudinal_section"/> </dc:element> </dc:for-each> </dc:context> </density> </dc:for-each> </bed_quality_density> </dc:if> </dc:context> </dc:macro> <dc:macro name="bedquality-porosity"> <dc:context> <dc:statement> SELECT id AS oid FROM outs AS o WHERE o.artifact_id = ${a_id} AND o.name='bed_longitudinal_section' </dc:statement> <dc:if test="dc:has-result()"> <bed_quality_porosity> <dc:for-each> <porosity description="{$river} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE (f.name = 'bed_longitudinal_section.porosity_toplayer' OR f.name = 'bed_longitudinal_section.porosity_sublayer') AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="out" value="bed_longitudinal_section"/> </dc:element> </dc:for-each> </dc:context> </porosity> </dc:for-each> </bed_quality_porosity> </dc:if> </dc:context> </dc:macro> <dc:macro name="flow-velocity"> <dc:context> <dc:statement> SELECT id AS oid FROM outs AS o WHERE o.artifact_id = ${a_id} and o.name='flow_velocity' </dc:statement> <dc:if test="dc:has-result()"> <flow-velocity> <dc:for-each> <flow description="{$river} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE (f.name = 'flow_velocity.totalchannel' OR f.name = 'flow_velocity.mainchannel' OR f.name = 'flow_velocity.totalchannel.filtered' OR f.name = 'flow_velocity.mainchannel.filtered') AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="out" value="flow_velocity"/> </dc:element> </dc:for-each> </dc:context> </flow> </dc:for-each> </flow-velocity> </dc:if> </dc:context> </dc:macro> <dc:macro name="sediment-load"> <dc:context> <dc:statement> SELECT id AS oid FROM outs AS o WHERE o.artifact_id = ${a_id} and o.name='sedimentload_ls' </dc:statement> <dc:if test="dc:has-result()"> <sediment-load> <dc:for-each> <load description="{$river} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE f.name LIKE 'sedimentload%' AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="out" value="sedimentload_ls"/> </dc:element> </dc:for-each> </dc:context> </load> </dc:for-each> </sediment-load> </dc:if> </dc:context> </dc:macro> <dc:macro name="bedheight-differences"> <dc:context> <dc:statement> SELECT id AS oid, name AS o_name FROM outs AS o WHERE o.artifact_id = ${a_id} AND (o.name = 'bed_difference_year' OR o.name = 'bed_differnece_epoch') </dc:statement> <dc:if test="dc:has-result()"> <bedheight-differences> <dc:for-each> <difference description="{$river} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE (f.name LIKE 'bedheight_difference.year%' OR f.name LIKE 'bedheight_difference.epoch%') AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="minfo"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:choose> <dc:when test="dc:contains($o_name, 'bed_difference_year')"> <dc:attribute name="out" value="bed_difference_year"/> </dc:when> <dc:otherwise> <dc:attribute name="out" value="bed_difference_epoch"/> </dc:otherwise> </dc:choose> </dc:element> </dc:for-each> </dc:context> </difference> </dc:for-each> </bedheight-differences> </dc:if> </dc:context> </dc:macro> <dc:macro name="waterlevels-discharge"> <dc:context> <dc:statement> SELECT id AS oid FROM outs AS o WHERE o.artifact_id = ${a_id} AND o.name = 'discharge_longitudinal_section' </dc:statement> <dc:if test="dc:has-result()"> <waterlevels-discharge> <dc:for-each> <discharge description="{$oid} {$river} {$a_id} {$a_creation} {$collection_name}"> <dc:context> <dc:statement> SELECT a.gid AS aid, f.id AS fid, f.name AS facet_name, f.num AS facet_num, f.description AS facet_description FROM outs AS o, facets AS f, artifacts AS a WHERE f.name = 'discharge_longitudinal_section.w' AND f.out_id = o.id AND o.artifact_id = ${a_id} AND a.id = ${a_id} </dc:statement> <dc:for-each> <dc:element name="${facet_name}"> <dc:attribute name="factory" value="winfo"/> <dc:attribute name="description" value="${facet_description}"/> <dc:attribute name="ids" value="${facet_num}-${facet_name}"/> <dc:attribute name="artifact-id" value="${aid}"/> <dc:attribute name="out" value="longitudinal_section"/> </dc:element> </dc:for-each> </dc:context> </discharge> </dc:for-each> </waterlevels-discharge> </dc:if> </dc:context> </dc:macro> <!-- Macros to load system data --> <dc:macro name="annotations"> <annotation factory="annotations" ids="{$river_id}"/> </dc:macro> <dc:macro name="mainvalues"> <wmainvalue factory="mainvalue" ids="{$river_id}:w"/> <qmainvalue factory="mainvalue" ids="{$river_id}:q"/> </dc:macro> <dc:macro name="cross_sections"> <cross_sections id="flood-protections-{$river_id}"> <dc:context connection="system"> <dc:statement> SELECT DISTINCT cs.id AS prot_id, cs.description AS prot_description FROM cross_sections cs JOIN cross_section_lines csl ON csl.cross_section_id = cs.id WHERE cs.river_id = ${river_id} AND csl.km BETWEEN ${fromkm} AND ${tokm} </dc:statement> <dc:for-each> <cross_section name="{$prot_description}" ids="{$prot_id}" factory="crosssections"/> </dc:for-each> </dc:context> </cross_sections> </dc:macro> <dc:macro name="hyks"> <hyks id="hyk-{$river_id}"> <dc:context connection="system"> <dc:statement> SELECT DISTINCT h.id AS hyk_id, h.description AS hyk_description FROM hyks h JOIN hyk_entries he ON he.hyk_id = h.id WHERE river_id = ${river_id} AND he.km BETWEEN ${fromkm} AND ${tokm} </dc:statement> <dc:for-each> <hyk name="{$hyk_description}" ids="{$hyk_id}" factory="hyk"/> </dc:for-each> </dc:context> </hyks> </dc:macro> <dc:macro name="fixings-macro"> <dc:filter expr="$kind=2"> <dc:if test="dc:has-result()"> <fixations> <dc:group expr="dc:replace($wst_description, 'Fixierungen/', '')"> <fixation name="{dc:group-key()}"> <dc:for-each> <dc:macro-body/> </dc:for-each> </fixation> </dc:group> </fixations> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_2_fixations_wqkms"> <dc:call-macro name="fixings-macro"> <column name="{$wst_column_name}" ids="fixations-wstv-{$wst_column_position}-{$wst_id}" factory="wqinterpol" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:call-macro> </dc:macro> <dc:macro name="basedata_2_fixations"> <dc:call-macro name="fixings-macro"> <column name="{$wst_column_name}" ids="fixations-wstv-{$wst_column_position}-{$wst_id}" factory="staticwqkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:call-macro> </dc:macro> <dc:macro name="basedata_3_officials"> <dc:filter expr="$kind=3"> <dc:if test="dc:has-result()"> <officiallines> <dc:group expr="$wst_description"> <official name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="additionals-wstv-{$wst_column_position}-{$wst_id}" factory="staticwqkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </official> </dc:group> </officiallines> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_4_heightmarks-points"> <dc:filter expr="$kind=4"> <dc:if test="dc:has-result()"> <heightmarks> <dc:group expr="{dc:replace($wst_description, 'HW-Marken/', '')}"> <heightmark name="dc:group-key()"> <dc:for-each> <column name="{$wst_column_name}" ids="heightmarks_points-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </heightmark> </dc:group> </heightmarks> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_4_heightmarks-points-relative_points"> <dc:filter expr="$kind=4"> <dc:if test="dc:has-result()"> <heightmarks> <dc:group expr="{dc:replace($wst_description, 'HW-Marken/', '')}"> <relativepoint name="dc:group-key()"> <dc:for-each> <column name="{$wst_column_name}" ids="heightmarks_points-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </relativepoint> </dc:group> </heightmarks> </dc:if> </dc:filter> </dc:macro> <dc:macro name="longitudinal-section-prototype"> <dc:call-macro name="basedata_0"/> <dc:call-macro name="basedata_1_additionals"/> <dc:call-macro name="basedata_2_fixations"/> <dc:call-macro name="basedata_4_heightmarks-points"/> <dc:call-macro name="basedata_3_officials"/> <dc:call-macro name="basedata_5_flood-protections"/> <dc:call-macro name="annotations_per_type"/> </dc:macro> <dc:macro name="basedata_5_flood-protections"> <dc:filter expr="$kind=5"> <dc:if test="dc:has-result()"> <flood_protections> <dc:group expr="dc:replace($wst_description, 'HW-Schutzanlagen/', '')"> <flood_protection name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="flood_protection-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </flood_protection> </dc:group> </flood_protections> </dc:if> </dc:filter> </dc:macro> <dc:macro name="annotations_per_type"> <annotations> <dc:context> <all_annotations factory="annotations" ids="{$river_id}"/> <dc:statement> SELECT id AS anno_id, name AS anno_description FROM annotation_types </dc:statement> <dc:for-each> <annotation name="{$anno_description}" factory="annotations" ids="{$river_id}:{$anno_description}"/> </dc:for-each> </dc:context> </annotations> </dc:macro> <dc:macro name="basedata_2_fixations_relative_point"> <dc:filter expr="$kind=2"> <dc:if test="dc:has-result()"> <fixations> <dc:group expr="dc:replace($wst_description, 'Fixierungen/', '')"> <relativepoint name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="fixations-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </relativepoint> </dc:group> </fixations> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_5_flood-protections_relative_points"> <dc:filter expr="$kind=5"> <dc:if test="dc:has-result()"> <flood_protections> <dc:group expr="$wst_description"> <relativepoint name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="flood_protection-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </relativepoint> </dc:group> </flood_protections> </dc:if> </dc:filter> </dc:macro> <dc:macro name="basedata_1_additionals-relative_point"> <dc:filter expr="$kind=1"> <dc:if test="dc:has-result()"> <additionals> <dc:group expr="$wst_description"> <relativepoint name="{dc:group-key()}"> <dc:for-each> <column name="{$wst_column_name}" ids="additionals-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:for-each> </relativepoint> </dc:group> </additionals> </dc:if> </dc:filter> </dc:macro> <dc:macro name="discharge_table_gauge"> <dc:context> <dc:statement> SELECT id AS gauge_id, name AS gauge_name FROM gauges WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <discharge_table_nn> <discharge_table_gauge> <dc:for-each> <gauge name="{$gauge_name}" factory="gaugedischarge" from="{$g_start}" to="{$g_stop}" ids="{$gauge_name}"/> </dc:for-each> </discharge_table_gauge> </discharge_table_nn> </dc:if> </dc:context> </dc:macro> <dc:comment>TODO: Why is this just a copy of the discharge_table_gauge?</dc:comment> <dc:macro name="discharge_computed"> <dc:call-macro name="discharge_table_gauge"/> </dc:macro> <dc:comment>TODO: Why is this just a copy of the discharge_table_gauge?</dc:comment> <dc:macro name="discharge_fix_wq"> <dc:call-macro name="discharge_table_gauge"/> </dc:macro> <dc:macro name="qsectors"> <qsector factory="qsectors" ids="{$river_id}"/> </dc:macro> <dc:macro name="flood-map-recommended"> <kilometrage> <riveraxis factory="riveraxis" ids="{$river_id}"/> </kilometrage> <rastermap> <background factory="wmsbackground" ids="{$river_id}"/> </rastermap> </dc:macro> <dc:macro name="minfo-heights"> <bedheights> <dc:call-macro name="bed-heights-single"/> <dc:call-macro name="bed-heights-epoch"/> </bedheights> </dc:macro> <dc:macro name="bed-heights-single"> <single> <dc:context> <dc:statement> SELECT id AS bedh_id, year AS bedh_year, description AS bedh_descr FROM bed_height_single WHERE river_id = ${river_id} </dc:statement> <dc:for-each> <height factory="bedheight" ids="bedheight-single-{$bedh_id}-{$bedh_year}" description="{$bedh_descr}"/> </dc:for-each> </dc:context> </single> </dc:macro> <dc:macro name="bed-heights-epoch"> <epoch> <dc:context> <dc:statement> SELECT id AS bedh_id, time_interval_id AS bedh_interval_id, description AS bedh_descr FROM bed_height_epoch WHERE river_id = ${river_id} </dc:statement> <dc:for-each> <height factory="bedheight" ids="bedheight-epoch-{$bedh_id}-{$bedh_interval_id}" description="{$bedh_descr}"/> </dc:for-each> </dc:context> </epoch> </dc:macro> <dc:macro name="flow_velocity_measurements"> <dc:context> <dc:statement> SELECT id AS fvmid, description AS fvmd FROM flow_velocity_measurements WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <flowvelocitymeasurement> <dc:for-each> <dc:comment>TODO: Why has this an id and factory?</dc:comment> <flow_velocity_measurement name="{$fvmd}" ids="{$fvmid}" factory="flowvelocity"> <dc:context> <dc:statement> SELECT id, description, station, datetime, v, w, q FROM flow_velocity_measure_values WHERE measurements_id = ${fvmid} AND station BETWEEN ${fromkm} AND ${tokm} </dc:statement> <dc:for-each> <measurement_value name="{$description} - {$station} - {$datetime}" ids="{$id}" factory="flowvelocity"/> </dc:for-each> </dc:context> </flow_velocity_measurement> </dc:for-each> </flowvelocitymeasurement> </dc:if> </dc:context> </dc:macro> <dc:macro name="morph_width"> <dc:context> <dc:statement> SELECT id AS width_id FROM morphologic_width WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <morph_width> <dc:for-each> <dc:context> <dc:statement> SELECT min(station) AS from_station, max(station) AS to_station FROM morphologic_width_values WHERE morphologic_width_id = ${width_id} </dc:statement> <dc:for-each> <morphologic-width name="{$from_station} - {$to_station}" ids="{$width_id}" factory="morph-width"/> </dc:for-each> </dc:context> </dc:for-each> </morph_width> </dc:if> </dc:context> </dc:macro> <dc:macro name="sounding-width"> <dc:context> <dc:statement> SELECT id AS bedh_id, year AS bedh_year, description AS bedh_descr FROM bed_height_single WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <soundings_width> <dc:for-each> <height factory="bedheight" ids="bedheight-singlevalues-{$bedh_id}-{$bedh_year}" description="{$bedh_descr}"/> </dc:for-each> </soundings_width> </dc:if> </dc:context> </dc:macro> <dc:macro name="basedata_0_macro"> <basedata> <dc:filter expr="$kind = 0"> <dc:group expr="$wst_description"> <basedata name="{dc:group-key()}"> <dc:for-each> <dc:macro-body/> </dc:for-each> </basedata> </dc:group> </dc:filter> </basedata> </dc:macro> <dc:macro name="basedata_0"> <dc:call-macro name="basedata_0_macro"> <column name="{$wst_column_name}" ids="base_data-wstv-{$wst_column_position}-{$wst_id}" factory="staticwqkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:call-macro> </dc:macro> <dc:macro name="basedata_0_wq"> <dc:call-macro name="basedata_0_macro"> <column name="{$wst_column_name}" ids="base_data-wstv-{$wst_column_position}-{$wst_id}" factory="wqinterpol" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:call-macro> </dc:macro> <dc:macro name="basedata_1_additionals_macro"> <additionals> <dc:filter expr="$kind=1"> <dc:group expr="dc:replace($wst_description, 'Zus.Längsschnitte/', '')"> <additional name="{dc:group-key()}"> <dc:macro-body/> </additional> </dc:group> </dc:filter> </additionals> </dc:macro> <dc:macro name="basedata_1_additionals"> <dc:call-macro name="basedata_1_additionals_macro"> <column name="{$wst_column_name}" ids="additionals-wstv-{$wst_column_position}-{$wst_id}" factory="staticwqkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:call-macro> </dc:macro> <dc:macro name="basedata_1_additionals_marks"> <dc:call-macro name="basedata_1_additionals_macro"> <column name="{$wst_column_name}" ids="additionalsmarks-wstv-{$wst_column_position}-{$wst_id}" factory="staticwkms" info="{$info} [km {$deffrom} - {$defto}]"/> </dc:call-macro> </dc:macro> <!-- Floodmap part --> <dc:macro name="flood-map-complete"> <dc:call-macro name="flood-map-buildings"/> <dc:call-macro name="catchments"/> <dc:call-macro name="floodmarks"/> <hws> <dc:call-macro name="hwslines"/> <dc:call-macro name="hwspoints"/> </hws> <dc:call-macro name="flood-map-routing"/> <hydrboundaries> <dc:call-macro name="flood-map-floodplain"/> <dc:call-macro name="flood-map-hydr-boundaries"/> </hydrboundaries> <dc:call-macro name="flood-map-uesk"/> </dc:macro> <dc:macro name="flood-map-routing"> <route_data> <dc:call-macro name="flood-map-qps"/> <dc:call-macro name="flood-map-fixpoints"/> <dc:call-macro name="flood-map-km"/> <dc:call-macro name="flood-map-riveraxis"/> </route_data> </dc:macro> <dc:macro name="flood-map-hydr-boundaries"> <bfg_model> <dc:call-macro name="flood-map-hydr-boundaries-poly"/> <dc:call-macro name="flood-map-hydr-boundaries-lines"/> </bfg_model> <dc:call-macro name="flood-map-hydr-boundaries-state"/> </dc:macro> <dc:macro name="flood-map-recommended"> <dc:comment> FIXME: Following two macros look identical to me. </dc:comment> <kilometrage> <riveraxis factory="riveraxis" ids="{$river_id}"/> </kilometrage> <rastermap> <background factory="wmsbackground" ids="{$river_id}"/> </rastermap> </dc:macro> <dc:macro name="flood-map-dem"> <dems> <dc:context> <dc:statement> SELECT d.id AS dem_id, r.a AS dem_lower, r.b AS dem_upper, d.name AS name, t.start_time AS start_time, t.stop_time AS stop_time, 'Projektion: ' || d.projection || '$' || 'Rasterweite: ' || d.resolution || 'm$' || 'Format: ' || d.format || '$' || 'Zeitraum: ' AS info FROM dem d JOIN ranges r ON d.range_id = r.id LEFT JOIN time_intervals t ON d.time_interval_id = t.id WHERE d.river_id = ${river_id} </dc:statement> <dc:for-each> <dem factory="demfactory" ids="{$dem_id}" name="{$name}" info="{dc:replace($info, '$', '<BR>')}{dc:date-format('yyyy', $start_time)} - {dc:date-format('yyyy', $stop_time)}"/> </dc:for-each> </dc:context> </dems> </dc:macro> <dc:macro name="filter_hws_ddg"> <dc:macro name="durchlass_damm_graben"> <dc:macro name="ddg_factory"> <dc:for-each> <hws factory="hwsfactory" name="{$hws_name}"/> </dc:for-each> </dc:macro> <dc:filter expr="$hws_kind=1"> <dc:if test="dc:has-result()"> <Durchlass><dc:call-macro name="ddg_factory"/></Durchlass> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=2"> <dc:if test="dc:has-result()"> <Damm><dc:call-macro name="ddg_factory"/></Damm> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=3"> <dc:if test="dc:has-result()"> <Graben><dc:call-macro name="ddg_factory"/></Graben> </dc:if> </dc:filter> </dc:macro> <dc:filter expr="$hws_official=1"> <dc:if test="dc:has-result()"> <official> <dc:call-macro name="durchlass_damm_graben"/> </official> </dc:if> </dc:filter> <dc:filter expr="$hws_official=0"> <dc:if test="dc:has-result()"> <inofficial> <dc:call-macro name="durchlass_damm_graben"/> </inofficial> </dc:if> </dc:filter> </dc:macro> <dc:macro name="flood-map-hws-lines"> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, official AS hws_official, kind_id AS hws_kind FROM hws_lines WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <lines> <dc:call-macro name="filter_hws_ddg"/> </lines> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-hws-points"> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, official AS hws_official, kind_id AS hws_kind FROM hws_points WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <points> <dc:call-macro name="filter_hws_ddg"/> </points> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-hydr-boundaries-state"> <federal> <dc:context> <dc:statement> SELECT DISTINCT name FROM hydr_boundaries WHERE river_id = ${river_id} AND kind = 2 </dc:statement> <dc:for-each> <line factory="wmshydrboundariesfactory" ids="{$river_id};{$name};2" name="{$name}"/> </dc:for-each> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT name FROM hydr_boundaries_poly WHERE river_id = ${river_id} AND kind = 2 </dc:statement> <dc:for-each> <line factory="wmshydrboundariespolyfactory" ids="{$river_id};{$name};2" name="{$name}"/> </dc:for-each> </dc:context> </federal> </dc:macro> <dc:macro name="flood-map-hydr-boundaries-lines"> <dc:context> <dc:statement> SELECT DISTINCT name FROM hydr_boundaries WHERE river_id = ${river_id} AND kind = 1 </dc:statement> <dc:comment> What about all other line kinds?</dc:comment> <dc:if test="dc:has-result()"> <lines> <dc:for-each> <line factory="wmshydrboundariesfactory" ids="{$river_id};{$name};1" name="{$name}"/> </dc:for-each> </lines> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-hydr-boundaries-poly"> <areas> <dc:context> <dc:statement> SELECT DISTINCT b.sectie AS sectie_id, sk.name AS sectie FROM hydr_boundaries_poly b JOIN sectie_kinds sk ON b.sectie = sk.id WHERE b.river_id = ${river_id} AND b.kind = 1 </dc:statement> <dc:if test="dc:has-result()"> <sobek_areas> <dc:for-each> <boundary name="{$sectie}" factory="wmshydrboundariespolyfactory" ids="{$river_id};{$sectie};1;{$sectie_id};-1"/> </dc:for-each> </sobek_areas> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT b.sobek AS sobek_id, sk.name AS sobek FROM hydr_boundaries_poly b JOIN sobek_kinds sk ON b.sobek = sk.id WHERE b.river_id = ${river_id} AND b.kind = 1 </dc:statement> <dc:if test="dc:has-result()"> <sobek_flooded> <dc:for-each> <boundary name="{$sobek}" factory="wmshydrboundariespolyfactory" ids="{$river_id};{$sobek};1;-1;{$sobek_id}"/> </dc:for-each> </sobek_flooded> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT b.name AS name FROM hydr_boundaries_poly b WHERE b.river_id = ${river_id} AND b.kind = 1 AND b.sobek IS NULL AND b.sectie is NULL </dc:statement> <dc:for-each> <boundary name="{$name}" factory="wmshydrboundariespolyfactory" ids="{$river_id};{$name}"/> </dc:for-each> </dc:context> </areas> </dc:macro> <dc:macro name="flood-map-uesk"> <dc:context> <dc:statement> SELECT DISTINCT 1 FROM floodmaps WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <uesk> <calculations> <dc:context> <dc:statement> SELECT DISTINCT 1 FROM floodmaps WHERE river_id = ${river_id} AND (kind = 112 OR kind = 111) </dc:statement> <dc:if test="dc:has-result()"> <current> <dc:context> <dc:statement> SELECT DISTINCT name AS name FROM floodmaps WHERE river_id = ${river_id} AND kind = 111 </dc:statement> <dc:if test="dc:has-result()"> <bfg> <dc:for-each> <floodmaps factory="wmsfloodmapsfactory" ids="{$river_id};{$name}" name="{$name}"/> </dc:for-each> </bfg> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT name AS name FROM floodmaps WHERE river_id = ${river_id} AND kind = 112 </dc:statement> <dc:if test="dc:has-result()"> <federal> <dc:for-each> <floodmaps factory="wmsfloodmapsfactory" ids="{$river_id};{$name}" name="{$name}"/> </dc:for-each> </federal> </dc:if> </dc:context> </current> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT 1 from floodmaps where river_id = ${river_id} AND (kind = 122 OR kind = 121) </dc:statement> <dc:if test="dc:has-result()"> <potential> <dc:context> <dc:statement> SELECT DISTINCT name AS name FROM floodmaps WHERE river_id = ${river_id} AND kind = 121 </dc:statement> <dc:if test="dc:has-result()"> <bfg> <dc:for-each> <floodmaps factory="wmsfloodmapsfactory" ids="{$river_id};{$name}" name="{$name}"/> </dc:for-each> </bfg> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT name AS name FROM floodmaps WHERE river_id = ${river_id} AND kind = 122 </dc:statement> <dc:if test="dc:has-result()"> <federal> <dc:for-each> <floodmaps factory="wmsfloodmapsfactory" ids="{$river_id};{$name}" name="{$name}"/> </dc:for-each> </federal> </dc:if> </dc:context> </potential> </dc:if> </dc:context> </calculations> <dc:context> <dc:statement> SELECT DISTINCT source AS source FROM floodmaps WHERE river_id = ${river_id} AND kind = 200 </dc:statement> <dc:if test="dc:has-result()"> <measurements> <dc:for-each> <year name="{$source}"> <dc:context> <dc:statement> SELECT DISTINCT name AS name FROM floodmaps WHERE river_id = ${river_id} AND kind = 200 AND source = ${source} </dc:statement> <dc:for-each> <floodmaps factory="wmsfloodmapsfactory" ids="{$river_id};{$name}" name="{$name}"/> </dc:for-each> </dc:context> </year> </dc:for-each> </measurements> </dc:if> </dc:context> </uesk> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-floodplain"> <dc:context> <dc:statement> SELECT DISTINCT fp.kind_id AS kind_id, flk.name AS kind_name FROM floodplain fp JOIN floodplain_kinds flk on fp.kind_id = flk.id WHERE river_id = ${river_id} AND kind_id=1 </dc:statement> <dc:if test="dc:has-result()"> <floodplain> <dc:filter expr="$kind_id=1"> <dc:for-each> <floody factory="wmsfloodplainfactory" description="{$kind_name}" ids="{$river_id};{$kind_name};{$kind_id}"/> </dc:for-each> </dc:filter> <dc:filter expr="kind_id!=1"> <other> <dc:for-each> <floody factory="wmsfloodplainfactory" description="{$layer_name}" ids="{$river_id};{$layer_name};{$kind_id}"/> </dc:for-each> </other> </dc:filter> </floodplain> </dc:if> </dc:context> </dc:macro> <dc:macro name="hwspoints_by_kind"> <dc:comment> Call from a context where fed_name hws_kind hws_name and river_id is availble </dc:comment> <dc:macro name="hwspoints_by_kind_factory"> <dc:for-each> <hws factory="wmshwspointsfactory" ids="{$river_id};{$hws_name}" name="{$hws_name}"/> </dc:for-each> </dc:macro> <dc:filter expr="$hws_kind=1"> <dc:if test="dc:has-result()"> <Durchlass> <dc:call-macro name="hwspoints_by_kind_factory"/> </Durchlass> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=2"> <dc:if test="dc:has-result()"> <Damm> <dc:call-macro name="hwspoints_by_kind_factory"/> </Damm> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=3"> <dc:if test="dc:has-result()"> <Graben> <dc:call-macro name="hwspoints_by_kind_factory"/> </Graben> </dc:if> </dc:filter> </dc:macro> <dc:macro name="hwspoints"> <hws_points> <official> <dc:context> <dc:statement> SELECT DISTINCT fs.name AS fed_name, fs.id AS fed_id FROM hws_points hws JOIN fed_states fs ON hws.fed_state_id = fs.id WHERE river_id = ${river_id} AND hws.official=1 </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, kind_id AS hws_kind FROM hws_points WHERE river_id = ${river_id} AND official=1 AND fed_state_id = ${fed_id} ORDER BY name </dc:statement> <fedstate description="{$fed_name}"> <dc:call-macro name="hwspoints_by_kind"/> </fedstate> </dc:context> </dc:for-each> </dc:context> <dc:context> <dc:statement> SELECT distinct name AS hws_name, kind_id AS hws_kind FROM hws_points WHERE river_id = ${river_id} AND official=1 AND fed_state_id IS NULL ORDER BY name </dc:statement> <hws_fed_unknown> <dc:call-macro name="hwspoints_by_kind"/> </hws_fed_unknown> </dc:context> </official> <inofficial> <dc:context> <dc:statement> SELECT DISTINCT fs.name AS fed_name, fs.id AS fed_id FROM hws_points hws JOIN fed_states fs ON hws.fed_state_id = fs.id WHERE river_id = ${river_id} AND hws.official=0 </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, kind_id AS hws_kind FROM hws_points WHERE river_id = ${river_id} AND official=0 AND fed_state_id = ${fed_id} ORDER BY name </dc:statement> <fedstate description="{$fed_name}"> <dc:call-macro name="hwspoints_by_kind"/> </fedstate> </dc:context> </dc:for-each> </dc:context> <dc:context> <dc:statement> SELECT distinct name AS hws_name, kind_id AS hws_kind FROM hws_points WHERE river_id = ${river_id} AND official=0 AND fed_state_id IS NULL ORDER BY name </dc:statement> <hws_fed_unknown> <dc:call-macro name="hwspoints_by_kind"/> </hws_fed_unknown> </dc:context> </inofficial> </hws_points> </dc:macro> <dc:macro name="hwslines_by_kind"> <dc:comment> Call from a context where fed_name hws_kind hws_name and river_id is availble </dc:comment> <dc:macro name="hwslines_by_kind_factory"> <dc:for-each> <hws factory="wmshwslinesfactory" ids="{$river_id};{$hws_name}" name="{$hws_name}"/> </dc:for-each> </dc:macro> <dc:filter expr="$hws_kind=1"> <dc:if test="dc:has-result()"> <Durchlass> <dc:call-macro name="hwslines_by_kind_factory"/> </Durchlass> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=2"> <dc:if test="dc:has-result()"> <Damm> <dc:call-macro name="hwslines_by_kind_factory"/> </Damm> </dc:if> </dc:filter> <dc:filter expr="$hws_kind=3"> <dc:if test="dc:has-result()"> <Graben> <dc:call-macro name="hwslines_by_kind_factory"/> </Graben> </dc:if> </dc:filter> </dc:macro> <dc:macro name="hwslines"> <hws_lines> <official> <dc:context> <dc:statement> SELECT DISTINCT fs.name AS fed_name, fs.id AS fed_id FROM hws_lines hws JOIN fed_states fs ON hws.fed_state_id = fs.id WHERE river_id = ${river_id} AND hws.official=1 </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, kind_id AS hws_kind FROM hws_lines WHERE river_id = ${river_id} AND official=1 AND fed_state_id = ${fed_id} ORDER BY name </dc:statement> <fedstate description="{$fed_name}"> <dc:call-macro name="hwslines_by_kind"/> </fedstate> </dc:context> </dc:for-each> </dc:context> <dc:context> <dc:statement> SELECT distinct name AS hws_name, kind_id AS hws_kind FROM hws_lines WHERE river_id = ${river_id} AND official=1 AND fed_state_id IS NULL ORDER BY name </dc:statement> <hws_fed_unknown> <dc:call-macro name="hwslines_by_kind"/> </hws_fed_unknown> </dc:context> </official> <inofficial> <dc:context> <dc:statement> SELECT DISTINCT fs.name AS fed_name, fs.id AS fed_id FROM hws_lines hws JOIN fed_states fs ON hws.fed_state_id = fs.id WHERE river_id = ${river_id} AND hws.official=0 </dc:statement> <dc:for-each> <dc:context> <dc:statement> SELECT DISTINCT name AS hws_name, kind_id AS hws_kind FROM hws_lines WHERE river_id = ${river_id} AND official=0 AND fed_state_id = ${fed_id} ORDER BY name </dc:statement> <fedstate description="{$fed_name}"> <dc:call-macro name="hwslines_by_kind"/> </fedstate> </dc:context> </dc:for-each> </dc:context> <dc:context> <dc:statement> SELECT distinct name AS hws_name, kind_id AS hws_kind FROM hws_lines WHERE river_id = ${river_id} AND official=0 AND fed_state_id IS NULL ORDER BY name </dc:statement> <hws_fed_unknown> <dc:call-macro name="hwslines_by_kind"/> </hws_fed_unknown> </dc:context> </inofficial> </hws_lines> </dc:macro> <dc:macro name="floodmarks"> <dc:context> <dc:statement> SELECT DISTINCT COALESCE(CAST (year AS VARCHAR(64)), 'Unbekanntes Jahr') AS year FROM flood_marks WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <floodmarks> <dc:for-each> <floodmark name="{$year}" factory="wmsfloodmarkfactory" ids="{$river_id};{$year};{$year}"/> </dc:for-each> </floodmarks> </dc:if> </dc:context> </dc:macro> <dc:macro name="catchments"> <catchments> <catchment_wms factory="externalwmsfactory" ids="http://geoportal.bafg.de/wmsproxy/INSPIRE/DrainageBasin;HY.PHYSICALWATERS.CATCHMENTS;Einzugsgebiete (WMS)" /> <dc:call-macro name="flood-map-gaugelocations"/> </catchments> </dc:macro> <dc:macro name="flood-map-gaugelocations"> <gaugelocations> <gauge_points factory="externalwmsfactory" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;Pegelpunkte;Pegelpunkte (WSV)"/> <gauge_names factory="externalwmsfactory" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;Pegelnamen;Pegelnamen (WSV)"/> <gauge_level factory="externalwmsfactory" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;Pegelwasserstand;Aktueller Wasserstand (WSV)"/> <gauge_tendency factory="externalwmsfactory" ids="http://www.pegelonline.wsv.de/webservices/gis/wms;TendenzWasserstand;Tendenz des Wasserstands (WSV)"/> </gaugelocations> </dc:macro> <dc:macro name="flood-map-riveraxis"> <dc:context> <dc:statement> SELECT DISTINCT ak.name AS kind_name, ax.kind_id AS kind_id, ax.name AS layer_name FROM river_axes ax JOIN axis_kinds ak on ax.kind_id = ak.id WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <axis> <dc:filter expr="$kind_id=1"> <dc:for-each> <actual description="{$kind_name}" ids="{$river_id};{$kind_name};{$kind_id}" factory="riveraxis"/> </dc:for-each> </dc:filter> <dc:filter expr="$kind_id!=1"> <other> <dc:for-each> <misc-axis description="{$layer_name}" ids="{$river_id};{$layer_name};{$kind_id}" factory="riveraxis"/> </dc:for-each> </other> </dc:filter> </axis> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-km"> <dc:context> <dc:statement> SELECT DISTINCT 1 FROM river_axes_km WHERE river_id = ${river_id} </dc:statement> <dc:for-each> <kilometrage factory="wmskmfactory" ids="{$river_id}"/> </dc:for-each> </dc:context> </dc:macro> <dc:macro name="flood-map-fixpoints"> <dc:context> <dc:statement> SELECT name AS name FROM fixpoints WHERE river_id = ${river_id} GROUP BY name </dc:statement> <dc:for-each> <fixpoints factory="wmsfixpointsfactory" ids="{$river_id};{$name}"/> </dc:for-each> </dc:context> </dc:macro> <dc:macro name="flood-map-qps"> <dc:context> <dc:statement> SELECT DISTINCT cs.kind_id AS kind_id, cs.name AS layer_name, ck.name AS kind_name FROM cross_section_tracks cs JOIN cross_section_track_kinds ck ON cs.kind_id = ck.id WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <qps> <dc:filter expr="$kind_id=1"> <dc:for-each> <actual description="{$kind_name}" factory="wmsqpsfactory" ids="{$river_id};{$kind_name};{$kind_id}"/> </dc:for-each> </dc:filter> <dc:filter expr="kind_id=0"> <other> <dc:for-each> <misc-qps description="{$layer_name}" factory="wmsqpsfactory" ids="{$river_id};{$layer_name};{$kind_id}"/> </dc:for-each> </other> </dc:filter> </qps> </dc:if> </dc:context> </dc:macro> <dc:macro name="flood-map-buildings"> <buildings> <dc:context> <dc:statement> SELECT DISTINCT b.name AS building_name, bk.name AS building_kind, b.kind_id AS building_kind_id FROM buildings b JOIN building_kinds bk ON b.kind_id = bk.id WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <dc:filter expr="$building_kind_id!=0"> <dc:for-each> <buildings description="{$building_kind}" factory="wmsbuildingsfactory" ids="{$river_id};{$building_kind};{$building_kind_id}"/> </dc:for-each> </dc:filter> <dc:filter expr="$building_kind_id=0"> <other> <dc:for-each> <buildings description="{$building_name}" factory="wmsbuildingsfactory" ids="{$river_id};{$building_name}"/> </dc:for-each> </other> </dc:filter> </dc:if> </dc:context> <dc:context> <dc:statement> SELECT DISTINCT j.kind_id AS jetty_kind_id, jk.name AS jetty_kind FROM jetties j JOIN jetty_kinds jk ON j.kind_id = jk.id WHERE river_id = ${river_id} </dc:statement> <dc:if test="dc:has-result()"> <jetties> <dc:for-each> <jetty description="{$jetty_kind}" factory="wmsjettiesfactory" ids="{$river_id};{$jetty_kind};{$jetty_kind_id}"/> </dc:for-each> </jetties> </dc:if> </dc:context> </buildings> </dc:macro> <dc:macro name="officiallines_user"> <dc:comment comment=".wst -------------------------------"/> <officiallines> <dc:for-each> <dc:context> <dc:statement> SELECT m.id AS a_id, m.state AS a_state, m.gid AS a_gid, m.creation AS a_creation, ardg.v AS gaugy, arv.v AS wqsingle FROM master_artifacts m, artifact_data ardg, artifact_data arv WHERE m.collection_id = ${collection_id} AND m.gid = CAST(${artifact-id} AS uuid) AND ardg.artifact_id = m.id AND ardg.k = 'ld_gaugename' AND arv.artifact_id = m.id AND arv.k = 'wq_single' AND EXISTS ( SELECT id FROM artifact_data ad WHERE ad.artifact_id = m.id AND k = 'river' AND v = ${river}) </dc:statement> <dc:for-each> <dc:context connection="system"> <dc:statement> SELECT ol.wst_id AS wstid, ol.wst_column_pos AS wstcolpos, ol.name AS olname, ol.value AS oval FROM official_q_values ol WHERE ol.value = CAST(${wqsingle} AS NUMERIC(10,2)) AND ol.gauge_name = ${gaugy} </dc:statement> <dc:for-each> <dc:element name="${olname}"> <dc:attribute name="name" value="${olname}"/> <dc:attribute name="ids" value="additionals-wstv-${wstcolpos}-${wstid}"/> <dc:attribute name="factory" value="staticwkms"/> <dc:attribute name="out" value="${out}"/> </dc:element> </dc:for-each> </dc:context> </dc:for-each> </dc:context> </dc:for-each> </officiallines> </dc:macro> <!-- Common stuff --> <dc:macro name="km-filtered-wsts"> <dc:context connection="system"> <dc:statement> SELECT w.kind AS kind, w.id AS wst_id, wc.id AS wst_column_id, wc.position AS wst_column_position, wc.description AS info, w.description AS wst_description, wc.name AS wst_column_name, wr.a AS deffrom, wr.b AS defto FROM wst_columns wc JOIN wsts w ON wc.wst_id = w.id JOIN wst_ranges wr ON wc.id = wr.wst_column_id WHERE w.river_id = ${river_id} AND NOT((${tokm} < wr.a) or (${fromkm} > wr.b)) </dc:statement> <dc:macro-body/> </dc:context> </dc:macro> <dc:macro name="km-filtered-userdata"> <dc:context connection="user"> <dc:statement> SELECT c.name AS collection_name, ma.id AS a_id, ma.state AS a_state, ma.gid AS a_gid, ma.creation AS a_creation, COALESCE(ld_mode, '') AS ld_m, COALESCE(ld_locations, '') AS ld_l, COALESCE(ld_from, '') AS ld_f, COALESCE(ld_to, '') AS ld_t FROM users u JOIN collections c ON c.user_id = u.id JOIN master_artifacts_range ma ON ma.collection_id = c.id WHERE c.id = ${collection_id} AND ma.gid <> CAST(${artifact-id} AS uuid) AND EXISTS ( SELECT id FROM artifact_data ad WHERE ad.artifact_id = ma.id AND k = 'river' AND v = ${river}) </dc:statement> <dc:for-each> <dc:variable name="from" type="number" expr="dc:fromValue($ld_m, $ld_l, $ld_f)"/> <dc:variable name="to" type="number" expr="dc:toValue($ld_m, $ld_l, $ld_t)"/> <dc:if test="!(($tokm < $from) or $fromkm > $tokm)"> <dc:macro-body/> </dc:if> </dc:for-each> </dc:context> </dc:macro> <dc:macro name="user-range"> <dc:choose> <dc:when test="dc:contains($parameters, 'user-id')"> <dc:context connection="user"> <dc:statement> SELECT COALESCE(ld_mode, '') AS ldm, COALESCE(ld_locations, '') AS ldl, COALESCE(ld_from, '') AS ldf, COALESCE(ld_to, '') AS ldt FROM master_artifacts_range WHERE gid = CAST(${artifact-id} AS uuid) </dc:statement> <dc:for-each> <dc:variable name="fromkm" type="number" expr="dc:fromValue($ldm, $ldl, $ldf)"/> <dc:variable name="tokm" type="number" expr="dc:toValue($ldm, $ldl, $ldt)"/> <dc:macro-body/> </dc:for-each> </dc:context> </dc:when> <dc:otherwise> <dc:variable name="fromkm" type="number" expr="dc:fromValue('', '', '')"/> <dc:variable name="tokm" type="number" expr="dc:toValue('', '', '')"/> <dc:macro-body/> </dc:otherwise> </dc:choose> </dc:macro> </datacage> </dc:template>