view flys-artifacts/ChangeLog @ 749:72bcbc308501

The WST export contains the corrected W values now. flys-artifacts/trunk@2257 c6561f87-3c4e-4783-a992-168aeb5c3f6f
author Ingo Weinzierl <ingo.weinzierl@intevation.de>
date Mon, 27 Jun 2011 16:07:24 +0000
parents 30be4b71c36c
children b24be063f8d2
line wrap: on
line source
2011-06-27  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/WaterlevelExporter.java,
	  src/main/java/de/intevation/flys/exports/WstWriter.java:
	  Append the corrected W column (if existing) to the WST export.

2011-06-27  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WQ.java:
	  Guessing increaing w is not based on direct neighbors any more.
	  The second to be compared with is choosen by random of
	  the values before the first one. This makes the guessing
	  more robust against 'plateaus' of equal w values.

2011-06-27  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/exports/ATWriter.java: Array
	  for constructing the spline was too large leading to non-increasing
	  values.

2011-06-27  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	Fix for flys/issue150

	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java,
	  src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
	  Invert the x axis if its guessed that water is increasing.

2011-06-27  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WQ.java(guessWaterIncreasing):
	  Added a method to guess based on a given factor of the size (default 0.05)
	  if the water levels are increasing. Needed to determine in which direction
	  the water level curve should be orientated. Based on random to avoid
	  running over large dataset each time a diagram is generated.

2011-06-27  Ingo Weinzierl <ingo@intevation.de>

	  flys/issue177 (WINFO: Abflusskurven am Pegel verursachen ein Hängen des Servers)

	* src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
	  Commented out code to generate time ranges for series names. There
	  seems to be a problem while loading the discharge tables of a gauge or
	  while determining the start and/or end time of such discharge tables.

2011-06-26  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/**/*.java: Removed trailing whitespace.

2011-06-26  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
	  Removed dead code.

2011-06-26  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	Fix for flys/issue173

	* src/main/java/de/intevation/flys/artifacts/model/Calculation4.java:
	  Fixed the way the gauge was found for a given interval.
	  The old way does not work because it was just tested if
	  the station point was inside the segments which is not
	  necessarily true. The obvious solution to simply check
	  the overlapping intervals does not work either because
	  the gauge ranges touch each other and so more than
	  one gauge are returned in these cases. The River.maxOverlap()
	  is now used to find the gauge with the max overlapping
	  range.

2011-06-26  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	Fix for flys/issue147

	* src/main/java/de/intevation/flys/artifacts/model/Calculation1.java:
	  Removed the 'kmUp' flag. It was an left over from former
	  WSP calculations (w/o ref km) leading to wrong results now.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Don't pass the kmUp flag to the calculation.

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
	  Added debug output to see the value of 'wq_free'.

2011-06-26  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	Fix for flys/issue86

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  The reference gauge for calculations "am Pegel" was determined
	  wrong.
	  
2011-06-25  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
	  Conversion w->q was broken. This should fix a number of issues
	  around "W am Pegel" calculations.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Issue an error report if a w->q conversion fails.

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
	  The gauge to convert w->q with its discharge table was determined wrong.

2011-06-24  Ingo Weinzierl <ingo@intevation.de>

	  flys/issue174 (Diagramm: Q-Linie wird bei initialem Laden des Diagramms
	  anders dargestellt als bei Ansicht auf gesamten Wertebereich)

	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
	  The chart will now have upper margins again.

2011-06-24  Ingo Weinzierl <ingo@intevation.de>

	  flys/issue172 (Diagramm: Ursprung der Diagramme bei Dauerzahlen)

	* src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java:
	  Charts of this type will have the lower X value set to "0".

2011-06-23  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/exports/ATWriter.java:
	  Results are now in cm. Made it more robust against corner cases.

	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
	  Removed superfluous import.

2011-06-23  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* doc/conf/artifacts/winfo.xml, doc/conf/conf.xml:
	  Added facet config for AT exports.

	* src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java:
	  Added 'at' facet type.

	* src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java:
	  Generate AT facets.
	
2011-06-23  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/exports/ATExporter.java: New.
	  Exporter for AT facets. Needs testing.

2011-06-23  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/exports/ATWriter.java: New.
	  Writer for AT files. New code because our data model differs
	  from Desktop-FLYS. Needs testing.

2011-06-23  Ingo Weinzierl <ingo@intevation.de>

	  flys/issue157 (Diagramm: Ursprung berechnete Abflusskurve)

	* src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java,
	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
	  Moved the method that adjusts the X-axis to include the "0" value from
	  ComputedDischargeCurveGenerator to DischargeCurveGenerator. Now, both
	  charts will include the "0" on the X-axis.

2011-06-23  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WQDay.java:
	  Based on WQ now to make it exportable as AT.

2011-06-23  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WQ.java:
	  New. Base class for WQKms.

	  TODO 1: make it a base class for WQDay, too,
	  TODO 2: Generate instances of WQ instead of WQKms in "Abflusskurven"
	          calculations. This will save memory.

	  AT exporter will get instances of this class as data model

	* src/main/java/de/intevation/flys/artifacts/model/NamedObject.java:
	  Add default constructor to ease inheritance.

	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java:
	  Based on WQ now. Removed code allready defined in base class.

2011-06-23  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* doc/conf/artifacts/winfo.xml: Add TODOs for error reports
	  of "Abflusskurven am Pegel". Maybe we don't need them?

	* doc/conf/conf.xml: Configure report for each calculated output type.

2011-06-22  Ingo Weinzierl <ingo@intevation.de>

	  flys/issue164 (Berechnung 4: Umgekehrtes Berechnungsintervall führt zur)

	* src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java:
	  Create the items with range information for W and Q which allows the
	  client to validate the user inserted values.

2011-06-21  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Arguments in filling datastructure were flip. Now
	  the "Abflusskurve am Pegel" looks correct again.

	* src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
	  Removed superfluous imports.

2011-06-21  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	Improved situtation on rendering "Abflusskurve am Pegel". Not
	fully working, yet.

	* doc/conf/artifacts/winfo.xml: Generate facets for the location path, too.

	* src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java: Misspelled
	  the facet which prevented the facets from being to the outputs.

	* src/main/java/de/intevation/flys/artifacts/model/WaterlevelFacet.java:
	  Extended to store the hash and the state id of the producing artifact/state
	  else it results in NPEs because the data is calculated on later (wrong) states.

	* src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java:
	  Store the state id and the hash in the facet, too.

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Add two
	  method to do calculations for a state the artifact is currently not in
	  and fetching the current state id.

2011-06-21  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* doc/conf/artifacts/winfo.xml: Generate facets for "Abflusskurven am Pegel"
	  Not working by now. :-/

	* src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java: New facet type
	  for "Abflusskurven am Pegel"

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Do calculation
	  in the artifact not in the output generator.

	* src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java:
	  Generate the new facets.

	* src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
	  Fetch data from facet.

2011-06-22  Ingo Weinzierl <ingo@intevation.de>

	  flys/issue161 (Diagramm: Q-Achse in W-Längsschnitten immer bei Q=0)

	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
	  The Q axis (which is the second y axis) initially contains the 0 value.
	  After a zoom action has taken place, this behaviour is no longer
	  supported.

2011-06-21  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	Draw correction curve again.

	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java:
	  Use correction curve to map plot to axes. Not doing so prevented
	  the correction curve from being drawn!
	  Smaller code cleanups and simplifications.

	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java,
	  src/main/java/de/intevation/flys/artifacts/model/WQCKms.java:
	  Added methods to directly access the components w, q and c
	  at a given index.

	* src/main/java/de/intevation/flys/exports/ChartGenerator.java:
	  Attribute access via DOM instead of XPath.

	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
	  Code simplification.

2011-06-21  Ingo Weinzierl <ingo@intevation.de>

	  flys/issue157 (Diagramm: Ursprung berechnete Abflusskurve)

	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Splitted
	  up zooming for x and y axes to be able to override specific axis
	  zoom behaviour.

	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
	  The lower bound of the x axis (which is the Q axis in such chart) is
	  always 0.

2011-06-21  Ingo Weinzierl <ingo@intevation.de>

	  flys/issue90 (Diagramm: Trennung derDiagrammfläche und Achsenaufheben)

	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java:
	  Added a margin between chart data and chart axes.

2011-06-21  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	Fix for flys/issue158

	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionExporter.java:
	  Checks for right class now.
	
2011-06-21  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	Fix for flys/issue154

	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java:
	  Checks for right class now.

2011-06-21  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Only generate 'outs' if they have facets.

	* src/main/java/de/intevation/flys/exports/ChartExportHelper.java:
	  'boolean ? true : false' <=> 'boolean'

2011-06-21  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  Added the time-to-live to the DESCRIBE document.

2011-06-20  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* doc/conf/artifacts/winfo.xml: Configured states to generate report facets.

2011-06-20  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/ReportFacet.java:
	  Return the report.

	* src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java,
	  src/main/java/de/intevation/flys/artifacts/states/DischargeLongitudinalSection.java,
	  src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java,
	  src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java:
	  Generate report facets if there are problems with the calculations.
	  TODO: Adjust winfo.xml to configure the facets.

2011-06-20  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/exports/ReportGenerator.java:
	  New. Generator for calculation reports.

	* doc/conf/conf.xml: Added ReportGenerator.

	* src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java:
	  Added type 'report'.

	* src/main/java/de/intevation/flys/artifacts/model/ReportFacet.java:
	  Specialized facet for serving reports. TODO: Added them to the
	  calculation states.

	* src/main/java/de/intevation/flys/artifacts/model/Calculation.java:
	  Looped through CallMeta for i18n purposes. TODO: do i18n

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Removed superfluous import.

	* src/main/java/de/intevation/flys/exports/AbstractExporter.java:
	  Added some override annotations.

2011-06-20  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/CalculationResult.java:
	  New. Used to transport the data and the error report.

	* src/main/java/de/intevation/flys/artifacts/model/WaterlevelFacet.java,
	  src/main/java/de/intevation/flys/artifacts/model/Calculation1.java,
	  src/main/java/de/intevation/flys/artifacts/model/Calculation2.java,
	  src/main/java/de/intevation/flys/artifacts/model/Calculation3.java,
	  src/main/java/de/intevation/flys/artifacts/model/Calculation4.java,
	  src/main/java/de/intevation/flys/artifacts/model/DurationCurveFacet.java,
	  src/main/java/de/intevation/flys/artifacts/model/Calculation.java,
	  src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java,
	  src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java,
	  src/main/java/de/intevation/flys/artifacts/states/DischargeLongitudinalSection.java,
	  src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java,
	  src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java,
	  src/main/java/de/intevation/flys/exports/WaterlevelExporter.java,
	  src/main/java/de/intevation/flys/exports/DurationCurveExporter.java:
	  Use the CalculationResult now.

2011-06-18  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/Calculation1.java:
	  Allow an explicit reference km to enable calculation "am Pegel".

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  If a calculation "am Pegel" is done, take start km of the
	  calculation range and find the gauge in which range it is located.
	  Take the station of the gauge as the reference km. If no gauge
	  is found the calcualtion falls back to calculation "auf freier Strecke".

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
	  Replaced another inefficient attribute extraction via XPath
	  with direct DOM access.

2011-06-18  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java,
	  src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java,
	  src/main/java/de/intevation/flys/exports/WaterlevelExporter.java,
	  src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
	  Removed dead code.

2011-06-18  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/DataFacet.java
	  src/main/java/de/intevation/flys/artifacts/model/WaterlevelFacet.java,
	  src/main/java/de/intevation/flys/artifacts/model/DurationCurveFacet.java,
	  src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java,
	  src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java,
	  src/main/java/de/intevation/flys/artifacts/states/DischargeLongitudinalSection.java,
	  src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java,
	  src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java,
	  src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
	  Only generate facets when needed.

	* src/main/java/de/intevation/flys/collections/OutputParser.java:
	  Removed more XPath for simply accessing attributes of an element.

	* doc/conf/cache.xml: 200 elements in memory for "computed.values" are enough,
	  LRU as eviction strategy is sufficent.

	* src/main/java/de/intevation/flys/collections/AttributeWriter.java,
	  src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Use
	  more 'standard' Java naming conventions.

2011-06-17  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	Merged in the facet-slt branch to bring in the 'facet' feature.

	* doc/conf/artifacts/winfo.xml: Fixed some facets.

	* doc/conf/cache.xml: Added a "computed.values" cache to store the
	  results of the WINFO calculations.

	* src/main/java/de/intevation/flys/artifacts/model/ManagedFacet.java:
	  Add support for index per facet to make them unique and identifiable.

	* src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java:
	  New. Inteface to be used to access the facet names of the configuration.

	* src/main/java/de/intevation/flys/artifacts/model/DataFacet.java: New.
	  A facet to be used to have raw access to the computed data of an artifact.
	  Useful to export things like CSV and WST.

	* src/main/java/de/intevation/flys/artifacts/model/WaterlevelFacet.java: New.
	  Specialized facet to access the water level data stored in WQKms arrays.

	* src/main/java/de/intevation/flys/artifacts/model/DurationCurveFacet.java: New.
	  Specialized facet to access the duration data stored in WQDay data structures.
	  
	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Facets are
	  now generated dynamically from the current available ones stored with
	  the artifact.

	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: Added
	  methods computeAdvance() and computeFeed() called if artifact is fed or
	  adance. This overwritten in subclasses to do the state depending calculations.

	* src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java,
	  src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java,
	  src/main/java/de/intevation/flys/artifacts/states/DischargeLongitudinalSection.java,
	  src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java,
	  src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java: These
	  states overwrites the computeAdvance() and computeFeed() methods to do
	  the corresponding WINFO calculations.

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Calls 
	  computeAdvance() and computeFeed() if artifact is fed or advanced. Centralized
	  the caching mechanism.

	* src/main/java/de/intevation/flys/exports/AbstractExporter.java,
	  src/main/java/de/intevation/flys/collections/AttributeParser.java,
	  src/main/java/de/intevation/flys/collections/OutputParser.java,
	  src/main/java/de/intevation/flys/collections/AttributeWriter.java,
	  src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  Adjusted the code to cope with the indices of the facets. Used
	  DOM to access the attributes instead of XPath. Removed smaller bugs
	  concerning position generation.

	* src/main/java/de/intevation/flys/exports/ChartInfoGenerator.java,
	  src/main/java/de/intevation/flys/exports/ChartGenerator.java,
	  src/main/java/de/intevation/flys/exports/OutGenerator.java:
	  Forwarded facet references.

	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java,
	  src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java,
	  src/main/java/de/intevation/flys/exports/DurationCurveExporter.java,
	  src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionExporter.java,
	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java,
	  src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java,
	  src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java,
	  src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java,
	  src/main/java/de/intevation/flys/exports/WaterlevelExporter.java:
	  Uses facets to fetch data and generate output now.

2011-06-17  Ingo Weinzierl <ingo@intevation.de>

	* doc/conf/artifacts/winfo.xml: Added a new parameter "wq_free" that
	  determines the mode of calculation 1. If it is "false" (default),
	  the calculation should be bound to a gauge.

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added a
	  method to retrieve the information about the "wq_free" parameter.

2011-06-17  Ingo Weinzierl <ingo@intevation.de>

	* doc/conf/artifacts/winfo.xml: Added a facet for corrected W in
	  computation 4.

2011-06-14  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java:
	  Got rid of namespace in result document.

2011-06-14  Ingo Weinzierl <ingo@intevation.de>

	  flys/issue77 (Diagramm: Beschriftung der Kurven bei Dauerlinien)

	* src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java:
	  Give the curves in the chart names.

	* src/main/resources/messages.properties,
	  src/main/resources/messages_de_DE.properties,
	  src/main/resources/messages_en.properties,
	  src/main/resources/messages_de.properties: Added titles for duration
	  chart curves.

2011-06-14  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java:
	  Write top 'Oberkante' and bottom 'Unterkante' to out going XML
	  if they exist.

2011-06-14  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java:
	  Write the min/max W/Q ranges as art:range elements into the DESCRIBE.

2011-06-14  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/LocationSelect.java:
	  This state that is used to retrieve locations will now write the
	  kilometer range of the selected river into the DESCRIBE document.

2011-06-10  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/Calculation1.java:
	  New. Factored out version of "Wasserspiegellage" calculation.
	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java:

	  Removed some dead code.

	* src/main/java/de/intevation/flys/artifacts/model/WQCKms.java:
	  Added Override annotation and used quick access method.

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  Looped through error reporting use by interpolate.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Used factored out version of calculation 1. Removed dead code.

2011-06-10  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/Calculation2.java:
	  New. Factored out version of "Abflusskurve".

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  Loop errors through w/q at km interpolation.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Use factored out version of calculation 2.

2011-06-10  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/Calculation3.java:
	  New. Factored out version of "Dauerzahlen".

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  Loop errors through for q->w interpolations.
	  
	* src/main/java/de/intevation/flys/artifacts/model/WQDay.java:
	  Added constructor to directly create with calculated results.

	* src/main/java/de/intevation/flys/artifacts/model/Calculation.java:
	  Added method to return the number of problems.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Use factored out version of calculation 3.

2011-06-10  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java,
	  src/main/java/de/intevation/flys/artifacts/model/WQCKms.java,
	  src/main/java/de/intevation/flys/artifacts/model/WQDay.java:
	  Added methods to remove NaN values.

2011-06-10  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/Calculation.java:
	  New. Base class for calculations. Used to collect problems occuring
	  during calculation.

	* src/main/java/de/intevation/flys/artifacts/model/Calculation4.java:
	  Extends Calculation now. Looped through the problem reports to
	  base class.

	* src/main/java/de/intevation/flys/artifacts/math/BackJumpCorrector.java:
	  Looped through the problem reports.

2011-06-09  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/InfoGeneratorHelper.java:
	  Append the min/max range and a transformation matrix for each axis.

	* src/main/java/de/intevation/flys/exports/ChartInfoGenerator.java:
	  Instantiate the InfoGeneratorHelper with a XYChartGenerator instance.

	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java:
	  Changed the zoom operation. The zoom values defined in the chart request
	  document are no longer absolute values for a specific axis. Those values
	  represent percental values for the start and end point of x and y axes.
	  E.g. a chart has three axes with the following ranges:
	    - x axis  :  0 - 10
	    - y axis 1: 20 - 40
	    - y axis 2: 40 - 90
	    - zoom values for x: 0.1 - 0.9 (10% - 90%)
	    - zoom values for y: 0.2 - 0.8 (20% - 80%)
	  The produced chart will have the following ranges:
	    - x axis  :  1 - 9
		- y axis 1: 24 - 36
		  y axis 2: 50 - 80

2011-06-09  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java,
	  src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java:
	  Map datasets to axes correctly.

2011-06-08  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/Calculation4.java:
	  Determine the gauges by their station positions. This hopfully
	  fixes the problem with wrong assigned gauges and invalid segments.

2011-06-08  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/Segment.java,
	  src/main/java/de/intevation/flys/artifacts/model/Calculation4.java:
	  Added more debug output.

2011-06-08  Ingo Weinzierl <ingo@intevation.de>

	  flys/issue103 PART 1 (WINFO: Wasserspiegellagenberechnung / Layout-Inkonsistenz)

	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
	  Selected values are formatted with the current locale. The static part
	  of the DESCRIBE document will now contain i18n formatted numbers.

2011-06-08  Ingo Weinzierl <ingo@intevation.de>

	  flys/issue93 (WINFO: Benennung der Berechnungsart korrigieren)

	* src/main/resources/messages_de_DE.properties,
	  src/main/resources/messages_de.properties: Changed the name of
	  calculation 4.

2011-06-08  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java:
	  Made the range determination more robust against NaN values.

2011-06-08  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
	  The second y axis is set to position "1". It was set to "2" before, but
	  in that case, there was no position "1".

2011-06-08  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/exports/WaterlevelExporter.java,
	  src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java,
	  src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionExporter.java,
	  src/main/java/de/intevation/flys/exports/DurationCurveExporter.java,
	  src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java,
	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java,
	  src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java:
	  s@m³/s@m\\u00b3/s@

2011-06-08  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/exports/InfoGeneratorHelper.java:
	  Only generate an axis element if a axis really exists.

2011-06-07  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/math/BackJumpCorrector.java:
	  Simpified array swapping.

2011-06-07  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java,
	  src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
	  Use java.util.List instead of java.util.Vector

	* src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java,
	  src/main/java/de/intevation/flys/artifacts/states/DischargeLongitudinalSection.java,
	  src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java,
	  src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
	  Removed superfluous imports.

2011-06-07  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
	  createItem() is not abstract any longer to avoid code repetitionin sub classes.

	* src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java,
	  src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java,
	  src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java,
	  src/main/java/de/intevation/flys/artifacts/states/WQSelect.java,
	  src/main/java/de/intevation/flys/artifacts/states/DischargeLongitudinalSection.java,
	  src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java,
	  src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java,
	  src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java:
	  Removed duplicated code, inserted default constructors and Override annotations.

2011-06-07  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/InfoGeneratorHelper.java:
	  Append axes range information to the info document.

2011-06-07  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
	  If feed() fails do not store invalid values in database.

2011-06-06  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/exports/InfoGeneratorHelper.java:
	  Removed asymmetrical "- 1" from width calculation.

2011-06-05  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/Calculation4.java:
	  Fixed problem when more than one value per segment are given.

2011-06-05  Sascha L. Teichmann <sascha.teichmann@intevation.de>

	Refactored version of "Berechnung 4"

	* src/main/java/de/intevation/flys/artifacts/model/Segment.java:
	  Added instance fields for a reference point (= location of gauge)
	  and backup of values (needed for naming).

	* src/main/java/de/intevation/flys/artifacts/model/WQCKms.java:
	  Added a constructor to be created from a WQKms. This is helpful
	  if a WQKms is replaced by a back jump correction.

	* src/main/java/de/intevation/flys/artifacts/model/Calculation4.java:
	  New. Outfactored version of "W bei ungleichmaessigen Abflusslaengsschnitt".
	  Much cleaner now and it should have a better handling of the corner
	  cases.

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  Removed the linear interpolation stuff. It is now in Linear. Removed
	  the LinearRemap interpolation method because it is not needed any
	  longer. Added a method to interpolate a given km with a given
	  function.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Removed the old calc 4 and used the new one.

	* src/main/java/de/intevation/flys/artifacts/math/LinearRemap.java:
	  Deleted. Not needed any longer.

	* src/main/java/de/intevation/flys/artifacts/math/Function.java:
	  New. Interface for a uni-variate real function.

	* src/main/java/de/intevation/flys/artifacts/math/Identity.java:
	  New. Implements Function with f(x) = x

	* src/main/java/de/intevation/flys/artifacts/math/Linear.java:
	  New. Implements Function with f(x) = m*x + b

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
	  Factored some stuff out to DoubleUtil. Removed some dead code.
	  Does some rounding correct.

	* src/main/java/de/intevation/flys/utils/DoubleUtil.java: New.
	  Centralized utils surrounding common double operations.

	* src/main/java/de/intevation/flys/exports/ChartInfoGenerator.java:
	  Removed superfluous imports.

2011-06-03  Ingo Weinzierl <ingo@intevation.de>

	  flys/issue90(Diagramm: Trennung der Diagrammfläche und Achsen aufheben)

	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java:
	  Determine the ranges of x and y axes. If no zoom ranges are given, we
	  will determine the min and max xy values in the dataset manually,
	  because JFreeCharts adds a margin to the left and right of the data
	  area automatically..

2011-06-03  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Moved
	  the chart creation into an own public method. This lets the
	  ChartInfoGenerator create charts without duplicating code.

	* src/main/java/de/intevation/flys/exports/ChartInfoGenerator.java:
	  Limited the possible class for generators to XYChartGenerator. This
	  enables the ChartInfoGenerator class to do the whole chart creation
	  stuff itself without outsourcing the code to concrete subclasses.

	* src/main/java/de/intevation/flys/exports/LongitudinalSectionInfoGenerator.java,
	  src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionInfoGenerator.java,
	  src/main/java/de/intevation/flys/exports/DurationCurveInfoGenerator.java,
	  src/main/java/de/intevation/flys/exports/DischargeCurveInfoGenerator.java,
	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveInfoGenerator.java:
	  Removed the code to generate charts - this is done in ChartInfoGenerator
	  now.

2011-06-03  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/ChartGenerator.java: Added new
	  methods to extract the x and y ranges from request document.

	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Added a
	  method that zooms the chart to the specified x and y ranges.

2011-06-02	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* doc/conf/conf.xml: Set collection ttl to 6 hours.

2011-06-01	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/Segment.java:
	  New. Parse segments only once.

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
	  Expose new parser to artifacts. TODO: Use it.

2011-06-01	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  Changed interpolation methods to interpolate to an arbitrary position
	  in a given double result array as a preparation for segment independent
	  calculation.

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  Removed superfluous import.

	* src/main/java/de/intevation/flys/artifacts/math/BackJumpCorrector.java:
	  Fixed cause for crashing: Run back too far in some siutations.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Refactored range code a bit. Needs more work.

2011-06-01  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/InfoGeneratorHelper.java:
	  Interchange the lower and upper x value of the chart if the x-axis is
	  inverted before the matrix values are computed. Now, the matrix is able
	  to work with charts that have an inverted x-axis.

2011-06-01  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/ChartInfoGenerator.java: New. A
	  chart info generator generates a document that contains meta information
	  for a specific chart. Concrete instances of this abstract class need to
	  instantiate concrete ChartGenerators and dispatch nearly all methods of
	  an OutGenerator (init(), doOut(), setMaster()) to this instance. The
	  generate() method is implemented in the ChartInfoGenerator itself. It
	  creates a chart with help of the ChartGenerator instance and builds a
	  document that contains meta information of this chart.

	* src/main/java/de/intevation/flys/exports/InfoGeneratorHelper.java: New.
	  This helper is used to create the chart info document. At the moment,
	  the only information that is included in this document is a
	  transformation matrix to transform image coordinates into chart
	  coordinates.

	  NOTE: The transformation matrix creation needs some work to support
	  charts with inverted X axis.

	* src/main/java/de/intevation/flys/exports/LongitudinalSectionInfoGenerator.java,
	  src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionInfoGenerator.java,
	  src/main/java/de/intevation/flys/exports/DurationCurveInfoGenerator.java,
	  src/main/java/de/intevation/flys/exports/DischargeCurveInfoGenerator.java,
	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveInfoGenerator.java:
	  Concrete instances of ChartInfoGenerator that create the chart info for
	  the currently supported chart types.

	* doc/conf/conf.xml: Registered new OutGenerators.

2011-05-31  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  Added support for the 'type' paramter of the collection's out()
	  operation.

2011-05-31	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java,
	  src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  Use an explicit reference km for interpolation now.

2011-05-30	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* doc/conf/cache.xml: Introduced cache to store the distance info per river.
	  This boosts performance in following ab setup from  3.61 to 39.91 requests/secs.

	  $ ab -c 20 -n 1000 -p distances.xml http://127.0.0.1:8181/service/distanceinfo

	  $ cat distances.xml
	    <?xml version="1.0" encoding="UTF-8"?>
	    <art:river xmlns:art="http://www.intevation.de/2009/artifacts">Elbe</art:river>

	* src/main/java/de/intevation/flys/artifacts/model/AnnotationsFactory.java: Added
	  an iterator result to avoid construction expensive interim lists.

	* src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java: Use
	  the cache if configured.

2011-05-30	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	flys/issue82

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Only successful interpolations are named.

2011-05-27	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/math/BackJumpCorrector.java:
	  Make it work independent of river flow direction.

	* src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java:
	  Fixed bug in ordering segments

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Re-enabled
	  calculation of the back jump correction. Fixed more flow direction issues.
	  
2011-05-27  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  Removed call of XMLDebug class which is not in the version control.

2011-05-27  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  Moved the code part that skips themes right after the part that sets the
	  master artifact for the OutGenerator. We need this master artifact to
	  display empty charts - master artifact is used to create titles and
	  axes.

2011-05-27  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  Deactivated themes are not put into the chart.

2011-05-27  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/collections/AttributeParser.java:
	  Repaired broken XPath expressions to find the output modes in an
	  attribute document of a collection.

	* src/main/java/de/intevation/flys/collections/AttributeWriter.java: This
	  writer will now create a document that has a root node art:attribute.
	  Before these changes, the document's root node was art:outputs which is
	  part of the attribute document but not the right root node.

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  Adapted some XPath expressions and corrected the the process to create
	  attribute documents.

2011-05-26	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/math/LinearRemap.java:
	  Made it work independent of from/to order.

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
	  Added method to extract the ranges correctly from data.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Use the correct ranges. Comment out backjump detection temporarily.

2011-05-26	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java:
	  Generate fields for w/q input depend on flow direction.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Moved km up question out of loop.
2011-05-26	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Take the flow direction into account.

	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
	  Prevent NPE.

	* src/main/java/de/intevation/flys/artifacts/states/RangeState.java:
	  Allow to be 'from' greater than 'to' in ranges.

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Negate
	  step if 'from' is greater than 'to'.

2011-05-26	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
	  Round exploded values to a precision of 1e-6.

2011-05-25	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	Qs are now stored in ranges for each column.

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTableFactory2.java:
	  Deleted.

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTableFactory.java:
	  Was WstValueTableFactory2.

	* src/main/java/de/intevation/flys/artifacts/model/QRangeTree.java: Fixed
	  node linking bug. Removed dead code.

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  Q values are now stored in range trees by each column. The qs of the rows
	  are removed and the calculations are adjusted. Removed dead code.

2011-05-24	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTableFactory.java:
	  Moved cache name to WstValueTableCacheKey. Do not cache null references.

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTableCacheKey.java:
	  Moved cache name into this class.

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  Store QRangeTree for each column of value table. TODO: Use them!

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTableFactory2.java:
	  Intended as a replacement for WstValueTableFactory, but is work in progress.

	* src/main/java/de/intevation/flys/artifacts/model/QRangeTree.java: Fixed
	  index errors and added methods to dump as graphviz graph.

2011-05-24  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/WQSelect.java:
	  Improved the validation of WQ values.

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Use the
	  correct input data object to determine the selected WQ mode (range or
	  single input).

2011-05-24  Ingo Weinzierl <ingo@intevation.de>

	  ISSUE-40 (part I/II)

	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
	  Write default values (values already selected by the user before) of the
	  input data items into DESCRIBE.

2011-05-24  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java:
	  Removed needless imports.

2011-05-24  Ingo Weinzierl <ingo@intevation.de>

	  ISSUE-85 (part III/III)

	* src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java:
	  Added a static function that returns the kilometer values (double[])
	  from locations input (whitespace separated double values).

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Adapted
	  the getKms() method. It will now return a computed array of kilometers
	  if we had inserted a range, or it will return the inserted kilometers if
	  we had inserted locations.

2011-05-24	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTableFactory.java:
	  Moved cache key to separate class.

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTableCacheKey.java:
	  New. The new cache key class.

2011-05-24	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/QRangeTree.java:
	  Model to store the q values of a WST column efficiently. First
	  building block not to store the q values directly aside the
	  w values.

2011-05-24  Ingo Weinzierl <ingo@intevation.de>

	  ISSUE-85 (part I/III)

	* doc/conf/artifacts/winfo.xml: Added two further field 'ld_mode' and
	  'ld_locations' to the range/locations state to track the selected mode
	  and locations.

	* src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java:
	  Added methods to validate the user inserted locations.

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added a
	  method to determine of a range or locations have been inserted.

2011-05-23  Ingo Weinzierl <ingo@intevation.de>

	  ISSUE-62 (part II/II)

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Dump the
	  artifacts state/data in DEBUG mode in describe().

	* src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java,
	  src/main/java/de/intevation/flys/artifacts/states/DefaultState.java,
	  src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java,
	  src/main/java/de/intevation/flys/artifacts/states/WQSelect.java,
	  src/main/java/de/intevation/flys/artifacts/states/LocationSelect.java,
	  src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java,
	  src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java:
	  States will no longer store data. The only reason for states storing
	  StateData is to know about the necessary data for this state. If a State
	  needs to access the user input for a specific StateData object, it needs
	  to query the FLYSArtifact which stores the data.

2011-05-23  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added a
	  method to dump the artifacts state(s)/data.

2011-05-23	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	flys/issue84

	* src/main/java/de/intevation/flys/artifacts/model/WstFactory.java:
	  Forget to select wst kind.
	  
2011-05-20	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	flys/issue81

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  weights for kms were swapped. 

2011-05-20  Ingo Weinzierl <ingo@intevation.de>

	Tagged RELEASE 2.3.1

2011-05-20  Ingo Weinzierl <ingo@intevation.de>

	* Changes: Prepared changes for the upcoming release.

2011-05-20  Hans Plum <hans@intevation.de>

	* NEWS:
	Hint to Release 2.3.1. For further information look into module
	flys-client/NEWS

2011-05-19	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java (getExplodedValues):
	  Increment kms array size by one to take the end of range, too.

2011-05-19	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTableFactory.java:
	  Sort by rows (should not be necessary).

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  Use unsharp km lookup (epsilon = 0.0001). This fixes the problem
	  that some kms were not found.

2011-05-19  Ingo Weinzierl <ingo@intevation.de>

	  flys/issue66

	* src/main/resources/messages_en.properties: Fixed broken template.

2011-05-19  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Set the name of the computed discharge curve objects.

	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
	  The curves of this chart will now have names that consist of the word
	  'Discharge Curve', the river name and the kilometer that has been used
	  for the computation.

	* src/main/resources/messages.properties,
	  src/main/resources/messages_de_DE.properties,
	  src/main/resources/messages_en.properties,
	  src/main/resources/messages_de.properties: Added i18n strings for the
	  computed discharge curves.

2011-05-19	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
	  Added convenience method isQ() to determine if we are
	  doing Q calculations.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Reintroduced titles for the "W for unausgeglichene Abfluesse".

2011-05-19  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
	  The curves will now have names that consist of the gauge name and its
	  valid time range.

	* src/main/resources/messages.properties,
	  src/main/resources/messages_de_DE.properties,
	  src/main/resources/messages_en.properties,
	  src/main/resources/messages_de.properties: Added i18n strings for the
	  discharge curves.

2011-05-19	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Removed dead code.

2011-05-19	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Use the correct method to generate kms.

	* src/main/java/de/intevation/flys/artifacts/math/LinearRemap.java:
	  Added some logging to test the map in debug mode.

2011-05-18	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
	  Made getExplodedValues static.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Use new logic to calculate "W für ungleichwertige Abfluesse".
	  Not working, yet.

	* ChangeLog: Fixed former entry.

2011-05-18  Ingo Weinzierl <ingo@intevation.de>

	* doc/conf/artifacts/winfo.xml: Registered the WST export for discharge
	  longitudinal sections.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Set the
	  names of the discharge longitudinal section computation results.

	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java:
	  The W/Q curves in the chart will now have names.

	* src/main/java/de/intevation/flys/exports/WaterlevelExporter.java:
	  The WstWriter is filled with column names in an own method. So, we are
	  able to override this process in subclasses.

	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionExporter.java:
	  Adapted the column names for the WST export.

2011-05-18	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	Work on flys/issue69

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Use new logic to calculate "Wasserstand/Wasserspiegellage".
	  Compared to desktop FLYS are the results are structurally right 
	  but a bit off in the positions after the decimal points.
	  Maybe a result of the interpolation? Need to debug this.

2011-05-18  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
	  W and Q curves will now have names based on the defined W or Q values
	  for the waterlevel computation.

2011-05-18  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/NamedObject.java:
	  New. This object is used to give objects a name.

	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java: Inherit
	  from NamedObject now. Because we need to display names for those objects
	  in different places.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: The WQKms
	  objects returned by a waterlevel computation will now have names.

	* src/main/java/de/intevation/flys/exports/WaterlevelExporter.java:
	  Insert the column names for the WSTs into the WstWriter.

	* src/main/java/de/intevation/flys/exports/WstWriter.java: The column
	  names are written into the head of the WSTs now.

2011-05-17  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WstLine.java: New. This
	  class is used to store the W/Q values of a specific kilometer of a WST.

	* src/main/java/de/intevation/flys/exports/WstWriter.java: New. A writer
	  that creates WSTs.

	  TODO: The header of the WSTs is not finished. The Q descriptions are
	  missing.

	* src/main/java/de/intevation/flys/exports/WaterlevelExporter.java:
	  Enabled WST exports.

	* doc/conf/artifacts/winfo.xml: Registered the WST export for waterlevels.

2011-05-17  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/utils/Formatter.java: New. This class
	  supports functions to retrieve formatters for specific types of data
	  used in FLYS.

	* src/main/java/de/intevation/flys/exports/WaterlevelExporter.java,
	  src/main/java/de/intevation/flys/exports/DurationCurveExporter.java,
	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java,
	  src/main/java/de/intevation/flys/exports/AbstractExporter.java:
	  Removed the formatter declaration - the whole formatter stuff is done in
	  Formatter now.

2011-05-17  Ingo Weinzierl <ingo@intevation.de>

	  ISSUE-72

	* src/main/java/de/intevation/flys/artifacts/services/MainValuesService.java:
	  Repaired broken XPath expressions to extract start and end kilometer.

2011-05-17	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  Removed the Hibernate loading stuff.

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTableFactory.java:
	  New. The Hibernate loading.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Use the WstValueTableFactory for loading now.

2011-05-17  Ingo Weinzierl <ingo@intevation.de>

	Tagged RELEASE 0.1 aka Version 2.3.0

2011-05-16  Hans Plum <hans@intevation.de>

	* NEWS:
	New. Giving some user specific perspective to new functionality and
	changes. This file references releases dates only; details can be find
	in the client module at flys-client.

2011-05-10	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	First step to calculate "W fuer ungleichwertige Abfluesse" correctly.
	flys/issue55

	* src/main/java/de/intevation/flys/artifacts/math/LinearRemap.java:
	  New. Remaps "gleichwertige" Q values to the corresponding
	  "ungleichwertige" Q values depending on km.
	  
	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  Remap the Q values "ungleichwertig" depending on the 
	  "gleichwertige" ones.

2011-05-10	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	First step to fix flys/issue69

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  New code path to implement the calculation of "Wasserstand/Wasspiegellage"
	  correctly. TODO 1: Use new path in UI. TODO 2: Remove unused old code.

2011-05-13  Ingo Weinzierl <ingo@intevation.de>

	* Changes: Prepared Changes for the upcoming release 2.3 - see Changes
	  file to get to know about the changes of the version numbers.

2011-05-13  Ingo Weinzierl <ingo@intevation.de>

	  ISSUE-37

	* src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java: This
	  state would be happy if there is a UI provider called "river_panel".

2011-05-11  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/ChartGenerator.java: Added new
	  methods that return the requested chart size as integer array [width,
	  height]. The requested size is read from the incomding request document.

	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java: The size
	  of a chart is no longer static. The requested size is fetched using
	  ChartGenerator.getSize().

2011-05-11  Ingo Weinzierl <ingo@intevation.de>

	  ISSUE-52

	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
	  The X-Axis of such a chart is inverted, if the head of the river is not
	  at kilometer 0. This type of charts always have the head of the river at
	  the left side.

2011-05-10	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java:
	  Make incoming XML symmetric to DistanceInfoService.

2011-05-10  Ingo Weinzierl <ingo@intevation.de>

	  ISSUE-47

	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java,
	  src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java,
	  src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
	  Adjusted temporarily the color of the W, Q and corrected W curves to
	  distinguish each other.

2011-05-10  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java:
	  Adjusted the plot of xy charts - the gridlines are displayed now.

2011-05-10  Ingo Weinzierl <ingo@intevation.de>

	  ISSUE-53

	* src/main/java/de/intevation/flys/artifacts/resources/Resources.java:
	  Added a method that returns the preferred locale based on the available
	  locales of the server and the desired locales of the request (CallMeta).

	* src/main/java/de/intevation/flys/exports/AbstractExporter.java: Added a
	  method that creates a number formatter with minimum and maximum digits.

	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionExporter.java,
	  src/main/java/de/intevation/flys/exports/WaterlevelExporter.java,
	  src/main/java/de/intevation/flys/exports/DurationCurveExporter.java,
	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java:
	  Formatted the number values of the CSV exports.

2011-05-10  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/RangeWithValues.java:
	  New. A data structure that enables us to save a data triple: a range
	  that consist of lower and upper double value and a set of values that
	  belong to this range.

	* src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java:
	  Implemented the validation of W/Q values.

2011-05-10  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/AbstractExporter.java: New
	  method to retrieve i18n messages based on keys.

	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionExporter.java,
	  src/main/java/de/intevation/flys/exports/WaterlevelExporter.java,
	  src/main/java/de/intevation/flys/exports/DurationCurveExporter.java,
	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java:
	  Added headers for CSV exports.

	* src/main/resources/messages.properties,
	  src/main/resources/messages_de_DE.properties,
	  src/main/resources/messages_en.properties,
	  src/main/resources/messages_de.properties: Added new i18n strings for
	  CSV headers.

2011-05-10	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java:
	  Fetches river name from incoming XML document. If no river is given all 
	  infos about all rivers are listed.

	* src/main/resources/metadata/template.xml: Templates honors the 'river'
	  parameter.

	* src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java:
	  Extended to pass parameters to the templating. Added support for
	  type conversion.

	* src/main/java/de/intevation/flys/artifacts/services/meta/StackFrames.java:
	  Take parameters as an initial stack frame.
	  
	* src/main/java/de/intevation/flys/artifacts/services/meta/TypeConverter.java:
	  New. Converts types off stacked variables.

2011-05-10  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Added a
	  method to add subtitles to charts. The implementation in this class does
	  not add any subtitle. Concrete subclasses may override this method to
	  add some.

	* src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java,
	  src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java,
	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
	  Add subtitles to charts.

	* src/main/resources/messages.properties,
	  src/main/resources/messages_de_DE.properties,
	  src/main/resources/messages_en.properties,
	  src/main/resources/messages_de.properties: Added i18n templates for
	  compound messages (chart subtitles).

2011-05-10  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/resources/Resources.java:
	  Added new methods to retrieve translated compound messages.

2011-05-10  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/OutGenerator.java: Added a
	  method to set the master artifact that should be used for some special
	  operations.

	* src/main/java/de/intevation/flys/exports/ChartGenerator.java,
	  src/main/java/de/intevation/flys/exports/AbstractExporter.java:
	  Implement the setMasterArtifact() method of the interface.

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  Call OutGenerator.setMasterArtifact().

	  NOTE: The determination of the master artifact needs to be implemented!

2011-05-10  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Removed
	  hard coded dev code that defined a WQ mode.

2011-05-09	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java:
	  Stripped ugly extra whitespace from output introduced by
	  templating.

2011-05-09	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/resources/metadata/template.xml: Added forgotten
	  columns of fixation WSTs.

2011-05-09  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/ChartGenerator.java: Added a
	  method to retrieve i18n strings.

	* src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java,
	  src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java,
	  src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java,
	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
	  Enabled i18n support for chart title and axes labels.

	* src/main/resources/messages.properties,
	  src/main/resources/messages_de_DE.properties,
	  src/main/resources/messages_en.properties,
	  src/main/resources/messages_de.properties: Added i18n strings for the
	  chart types above.

2011-05-09  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionExporter.java:
	  New. This OutGenerator exports the data of a discharge longitudinal
	  section computation.

	* doc/conf/conf.xml: Added the DischargeLongitudinalSectionExporter.

	* doc/conf/artifacts/winfo.xml: Added the exporter with CSV facet to the
	  discharge_longitudinal_section state.

2011-05-07	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/math/BackJumpCorrector.java:
	  Added code to make back jump correction work with both
	  potential flow directions.

2011-05-06	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/resources/metadata/template.xml:
	  Added data cage configuration for 'Längsschnitt'.

2011-05-06  Ingo Weinzierl <ingo@intevation.de>

	* doc/conf/artifacts/winfo.xml: Added the missing Q facet for discharge
	  longitudinal sections.

	* src/main/java/de/intevation/flys/artifacts/model/WQCKms.java: New. A
	  derived dataset to store W/Q values with corrected Ws for a kilometer
	  range.

	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java: Some new
	  methods and a new constructor to initialize this data object with a
	  predefined set of values.

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: New
	  methods to retrieve the W/Q values for the 'discharge longitudinal
	  section' computation.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: New
	  methods to retrieve and compute data used for the 'discharge
	  longitudinal section' computation.

2011-05-05  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java:
	  Bugfix: just write the ranges of gauges into the DESCRIBE if the
	  'wq_values' data item is required.

	* src/main/resources/messages.properties,
	  src/main/resources/messages_de_DE.properties,
	  src/main/resources/messages_en.properties,
	  src/main/resources/messages_de.properties: Added i18n messages used in
	  the DESCRIBE of the WQAdapted state.

2011-05-05  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
	  Changed the title of the y-axis (now 'W [NN+m]').

2011-05-05  Ingo Weinzierl <ingo@intevation.de>

	* doc/conf/artifacts/winfo.xml: Improved the transition model to reach the
	  output state for creating 'discharge longitudinal section' charts.

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added a
	  method that returns all gauges of the selected river based on a the
	  given kilometer range.

	* src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java: New.
	  This state creates a set of elements for the DESCRIBE that consist of a
	  tuple of kilometer values. The number of elements depend on the number
	  of gauges intersected by the given kilometer range.

	* src/main/java/de/intevation/flys/artifacts/states/DischargeLongitudinalSection.java:
	  New. This state is the output state that is reached after the 'discharge
	  longitudinal section' computation has been chosen.

2011-05-05  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Default
	  step width between two kilometers added - if no step width is given,
	  this default width is used.

2011-05-05  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
	  Fixed a potential NullPointerException if there is just a single
	  kilometer given to create a longitudinal section.

2011-05-04	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* pom.xml: Added http://repository.jboss.org/maven2 repo
	  to fix flys/issue30

2011-05-04	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  To make diagram generation possible ws are now generated from qs
	  because they are many ws having different qs.

2011-05-04  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java:
	  Fetch the WQ data from WINFO artifact and write those values into the
	  CSV export.

2011-05-04  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Added
	  methods to compute and retrieve the data for discharge curves (computed).

	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
	  Fetch the computed discharge curve data from WINFOArtifact and add the
	  values into the JFreeChart dataset.

2011-05-04  Ingo Weinzierl <ingo@intevation.de>

	* doc/conf/artifacts/winfo.xml: Added new transitions and states to enable
	  the WINFO artifact for computing discharge curves.

	* doc/conf/conf.xml: Added OutGenerators that generate computed discharge
	  curves and exports for its data.

	* src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java:
	  New. This state is reached if the user chose the computed discharge
	  curve.

	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
	  New. This is only a stub implementation at the moment. This
	  OutGenerator should create computed discharge curves later. It extends
	  the DischargeCurveGenerator which should do the same stuff for discharge
	  curves for gauges.

	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java:
	  New. This is only a stub implementation at the moment. This OutGenerator
	  should create the exports of the discharge curve computation.

2011-05-03  Ingo Weinzierl <ingo@intevation.de>

	* doc/conf/artifacts/winfo.xml: Added a new output mode for the duration
	  curve state (CSV export).

	* doc/conf/conf.xml: Added a new OutGenerator to export duration curve
	  computations.

	* src/main/java/de/intevation/flys/exports/AbstractExporter.java: New.
	  This abstract OutGenerator represents the base class for exporting
	  computed data. Currently, the CSV export is supported.

	* src/main/java/de/intevation/flys/exports/WaterlevelExporter.java: Moved
	  the most code to export to CSV into the AbstractExporter.

	* src/main/java/de/intevation/flys/exports/DurationCurveExporter.java:
	  New. This exporter exports the computed data of a duration computation.

2011-05-03  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  Modified a wrong debug statement which would confuse the user.

2011-05-03  Ingo Weinzierl <ingo@intevation.de>

	* doc/conf/artifacts/winfo.xml: Added a new output mode for the waterlevel
	  state (CSV export).

	* doc/conf/conf.xml: Added a new OutGenerator to export waterlevels.

	* src/main/java/de/intevation/flys/exports/WaterlevelExporter.java: New.
	  This OutGenerator exports the data of a waterlevel computation. Note:
	  It is necessary to specify the desired facet (e.g.
	  'waterlevel_export.csv').

	* pom.xml: Added a dependency to OpenCSV.

2011-05-03  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  Introduced an "export" output target. If the target is "export", a
	  facet (read from the incoming xml document) is a necessary parameter
	  that determines which facets are written to the output.

2011-05-03  Ingo Weinzierl <ingo@intevation.de>

	* src/main/resources/messages_en.properties: Bugfix: replaced german
	  string (copy & paste mistake).

2011-05-03  Ingo Weinzierl <ingo@intevation.de>

	* src/main/resources/messages.properties,
	  src/main/resources/messages_de_DE.properties,
	  src/main/resources/messages_en.properties,
	  src/main/resources/messages_de.properties: Added new i18n strings for
	  for the location selection.

2011-05-03  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java:
	  New. An OutGenerator for creating duration curves.

	* src/main/java/de/intevation/flys/artifacts/model/WQDay.java: New. A
	  model class to store necessary data for creating W and Q facets of a
	  duration curve. This model stores W, Q and Days.

	* src/main/java/de/intevation/flys/artifacts/model/MainValuesFactory.java:
	  Added a function to retrieve tuples of (day, q) based on a given gauge -
	  these tuples are necessary for creating duration curves.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Added
	  methods to compute and retrieve the data necessary for creating duration
	  curves.

	* src/main/java/de/intevation/flys/artifacts/states/LocationSelect.java:
	  Bugfix: improved the access to the location array (avoid
	  NullPointerException).

	* doc/conf/conf.xml: Registered the new OutGenerator for duration curves.

2011-05-03	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* contrib/visualize-transitions.xsl: State quoting was done wrong.

2011-05-02  Ingo Weinzierl <ingo@intevation.de>

	* doc/conf/artifacts/winfo.xml: Enhanced the transition model to reach the
	  final state for creating duration curves.

	* src/main/java/de/intevation/flys/artifacts/states/LocationSelect.java:
	  New. This state should be reached to just insert an array of locations.

	* src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java:
	  New. This state is reached if the duration curve calculation is
	  selected.

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Adjusted
	  getDistance() so that it takes care on inserted locations - not just
	  inserted ranges.

2011-05-02	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/cache/CacheFactory.java:
	  Flush/persist caches at program exists.

	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
	  Commented out too eloquent debug output.

2011-05-02  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
	  Uses the methods of FLYSArtifact to retrieve the necessary information
	  rivername and selected distance.

2011-05-02	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  Added interpolateW method to take reference to result ws array
	  as an argument to avoid expensive array allocations in km iterating
	  loops.

	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java:
	  Added a constructor to create backing trove datastructure
	  with the right capacity.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Move allocation of result ws out of km loop.

2011-05-02  Ingo Weinzierl <ingo@intevation.de>

	* doc/conf/artifacts/winfo.xml: Added two further data items in the WQ
	  selection state. Those items are necessary to store the information
	  about the selected mode (range/single selection) and  the values of the
	  single selection.

	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: If
	  there is no value for a data item, this item is not written into the
	  static DESCRIBE part.

	* src/main/java/de/intevation/flys/artifacts/states/RangeState.java,
	  src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java:
	  Renamed the method to validate upper and lower values.

	* src/main/java/de/intevation/flys/artifacts/states/WQSelect.java: This
	  state can now handle values inserted in the single selection. Therefore,
	  new validate methods has been added.

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: The
	  methods getWs() and getWs() take care on the values inserted in the
	  single insert mode of the client which enables the user to insert single
	  W and Q.

2011-05-02	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
	  Repaired getQForW() by calculating indices on right dimension.

2011-05-02  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: New
	  methods for retrieving selected W values (getWs()).

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: The
	  method for retrieving waterlevel data takes care on selected Ws, now.
	  The selected Ws are transformed using the DischargeTables.getQForW()
	  into Q values.

2011-05-02  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
	  Removed an unused parameter 'result' of getQForW().

2011-05-02  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Removed
	  the getDataset() method and replaced it with a addDataset() method.
	  On this way, concrete subclasses of this OutGenerator can have multiple
	  datasets (e.g. different datasets for W and Q). This abstract method is
	  called after the chart generation is finished.

	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java,
	  src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
	  Both classes implement the addDataset() method. The
	  LongitudinalSectionGenerator has already multiple datasets for W and Q.
	  Both are added to the chart - both have an own range axis.

2011-05-01	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  Use the cache for the wst value table if configured.

	* doc/conf/cache.xml: Choose a more precise name for the 
	  wst value table cache.

2011-04-29	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* pom.xml: Added dependency to Ehcache. Apache 2.0 license.

	* doc/conf/conf.xml: Added configuration of ehcache.

	* doc/conf/cache.xml: New. Cache configurations.

	* src/main/java/de/intevation/flys/artifacts/cache/CacheFactory.java:
	  New. Factory to access caches.

2011-04-29	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java:
	  Forgot to add.

	* src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java:
	  New. Given a database connection and a XML template it generates
	  an output with meta data about the database.

	* src/main/java/de/intevation/flys/artifacts/services/meta/CompiledStatement.java:
	  New. Holds prepared statements optimized to be run in the stack of
	  contextes.

	* src/main/java/de/intevation/flys/artifacts/services/meta/StackFrames.java:
	  New. Model to hold a hierarchical scope of variables.

	* src/main/java/de/intevation/flys/artifacts/services/meta/ResultData.java:
	  New. Stores data set fetched from a sql select to be iterated in
	  a context.

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java,
	  src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  Removed superfluous imports.

2011-04-29	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* doc/conf/conf.xml: Added meta data service.

	* src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java:
	  Stub for the meta data service.

	* src/main/resources/metadata/template.xml: Initial template for
	  the meta data service.

2011-04-29  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  Bugfix: Now, curves for Q values are drawn into a longitudinal section
	  chart as well. Therefore, it was necessary to change the datastructure
	  of the inner class ThemeList that stores all themes included in a chart
	  in an ordered list (stored in a java.util.Vector now).

2011-04-29  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java: New. An
	  abstract base class for ChartGenerators that create XY charts.

	* src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
	  Sourced the generate() method out to the XYChartGenerator.

	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
	  Implemented the methods to add W and Q facets to the chart.

2011-04-29  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Improved
	  the calculation of the step with for ranges.

2011-04-29  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java: Added a
	  method that returns the number of elements stored in the data pool.

2011-04-29	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java:
	  Added a get() method which takes destination array as an
	  argument.

2011-04-29  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java: Changed the
	  data structure to store w, q and kms values from List<Double> to
	  TDoubleArrayList which stores native double values instead of big
	  Double values.

	* pom.xml: Added the GNU Trove dependency.

2011-04-29  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/OutGenerator.java: Added the
	  name a the requested facet to doOut(). Concrete generators should just
	  create output for this facet now.

	* src/main/java/de/intevation/flys/exports/ChartGenerator.java,
	  src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java,
	  src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
	  Adapted the method signature of doOut().

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  Adapted the method call of OutGenerator.doOut().

2011-04-29  Ingo Weinzierl <ingo@intevation.de>

	* doc/conf/themes.xml: Added mappings for the facets
	  longitudinal.section.w and longitudinal.section.q.

2011-04-29  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added some
	  methods to retrieve necessary information for computing the data of a
	  waterlevel.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Added
	  methods to compute and retrieve the data of a waterlevel computation.

2011-04-29  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java: New. This
	  model class represents a pool of data triples that consist of W, Q and
	  Kms information. This class might be used to compute data for creating
	  longitudinal section curves (which are based on those W, Q and Kms
	  values).

2011-04-29  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  Bugfix: Removed endless loop and a bug while iterating over Hibernate
	  results.

2011-04-28  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
	  New. An OutGenerator that creates longitudinal section curves.

	  NOTE: This is just the stub - the out creation needs to be implemented!

	* doc/conf/conf.xml: Added the LongitudinalSectionGenerator.

2011-04-28  Ingo Weinzierl <ingo@intevation.de>

	* doc/conf/conf.xml: Bugfix: Added missing <output-generators> section.

2011-04-28  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WaterlevelState.java: New.
	  This state should be reached if the 'calc.surface.curve' calculation
	  method has been chosen.

	* doc/conf/artifacts/winfo.xml: Modified a transition and added the
	  WaterlevelState. This state is reached if the 'calc.surface.curve'
	  calculation method has been chosen. It currently has 1 output - a
	  longitudinal section that is not implemented yet!

2011-04-28  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/transitions/ValueCompareTransition.java:
	  New. This transition is valid if the a data object of the current
	  artifact equals/notequals a configured value in the transition model.

2011-04-28  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java,
	  src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Bugfixes:
	  - Adapted the parameters of the isStateReachable() call - added the
	    artifact and the current state.
	  - Append the outputs of a current state if the state is filled with
	    valid data.

2011-04-28  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/transitions/DefaultTransition.java:
	  Added the missing init() method that has been introduced in the
	  interface some commits ealier.

	* src/main/java/de/intevation/flys/artifacts/transitions/TransitionFactory.java:
	  Call init() after a Transition has been created.

2011-04-28  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/collections/AttributeWriter.java:
	  Bugfix: Introduced a <art:outputs> node in the attribute document of a
	  Collection that contains further <art:output> nodes - instead of having
	  multiple <art:output> nodes at toplevel of the document.

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  Adapted the XPath to retrieve the outputs in the attribute document of a
	  Collection.

2011-04-28	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* contrib/visualize-transitions.xsl: Added to create a 
	  Graphviz digraph out of the config.xml. Usage:

	  $ xsltproc --stringparam base-dir ../doc/conf/ \
	    contrib/visualize-transitions.xsl \
	    doc/conf/conf.xml > transitions.dot

	  $ dot -Tsvg -o transitions.svg transitions.dot

2011-04-28  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java,
	  src/main/java/de/intevation/flys/artifacts/states/WQSelect.java:
	  If no data has been inserted so far, an IllegalArgumentException is
	  thrown.

2011-04-28  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java::
	  A lot of new methods to retrieve the theme of a facet - used while
	  creating the output of a facet/artifact. If a facet has no theme yet, it
	  is initialized.

2011-04-27  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/collections/AttributeParser.java,
	  src/main/java/de/intevation/flys/collections/OutputParser.java: Removed
	  useless imports.

2011-04-27  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/ChartGenerator.java: New. An
	  abstract OutGenerator that might be used to create chart output. Some
	  basic things that are equal in all charts should be done here!

	* src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
	  This OutGenerator no longer implements the OutGenerator directly, but it
	  extends the ChartGenerator now.

2011-04-27  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  Restructured the out() operation of a collection: Now, we collect a list
	  of artifacts/facets and use this for the OutGenerator. Its doOut()
	  method gets the attribute of an artifact - the position and the active
	  state is managed by the Collection itself.

2011-04-26  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/ManagedFacet.java: New.
	  a specialized facet that stores information about its position and its
	  state (active/inactive) in an output of a collection.

	* src/main/java/de/intevation/flys/collections/AttributeParser.java: New.
	  This parser takes the attributes (XML) of a collection and extracts the
	  contained outputs with its facets. The result is a Map<String, Output>.

	* src/main/java/de/intevation/flys/collections/OutputParser.java: New.
	  This parser is used to query the artifact's DESCRIBE and to extract the
	  supported outputs. The result is a Map<String, Output>.

	* src/main/java/de/intevation/flys/collections/AttributeWriter.java: New.
	  This writer merges the outputs contained in an attribute of a collection
	  with the outputs of a collection's artifacts.

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  The attributes of a collection are written into its DESCRIBE document
	  now. The OutputParser and AttributeParser are used to read the supported
	  attributes by the collection and its artifacts - the AttributeWriter is
	  used to merge both attributes and create a final attribute document.

2011-04-26  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/context/FLYSContext.java,
	  src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java:
	  The facet-2-theme mappings are initialized at startup and stored in the
	  FLYSContext.

	* src/main/java/de/intevation/flys/themes/ThemeFactory.java: Added a
	  function that retrieves a theme from FLYSContext based on its name.

2011-04-22	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  Corrected a silly c&p mistake.

2011-04-22	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/math/BackJumpCorrector.java:

	  Implementation of the "Ruecksprungkorrektur" to be done in
	  "W fuer angepassten Abflusslaengschnitt".

	  All tests show the expected results. In some corner cases the
	  algorithm described in the "Anwenderhandbuch" chapter 3.3.4.3 "Korrektur"
	  has some definition shortcomings:

	  a - What should happend when you cannot find point 2 because
	      you cannot step back one quarter from point 3 because there
	      is no data there any more (river too short in this direction)?
	      The implemented algorithm raises point 3' only to an
	      according factor. E.g. If you can step back the whole quarter
	      distance the elevation is the full quarter. If you can
	      step back only the half of the quarter the elevation is
	      only an eighth.

	  b - If the water heights between point 2 and 3 are constant then
	      the algorithm will produce a spline interpolation that
	      lowers those values. Is this intended?

	  For real data the back jumps are expected to be more in the middle
	  of the distance ranges so the corner cases are maybe not so
	  important.

	* src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java:
	  Removed superfluous import.

2011-04-21  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/themes/ThemeFactory.java: Removed debug
	  code that has been commited by accident.

2011-04-21  Ingo Weinzierl <ingo@intevation.de>

	* doc/conf/themes.xml: New. A first small theme configuration.

	* doc/conf/conf.xml: Added a link to the theme configuration.

	* src/main/java/de/intevation/flys/artifacts/context/FLYSContext.java:
	  Defined a key that is used to store a themes map in the FLYSContext.

	* src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java:
	  The theme configuration is read at startup and the themes are stores in
	  the FLYSContext.

2011-04-21  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/themes/Theme.java,
	  src/main/java/de/intevation/flys/themes/DefaultTheme.java:
	  New. The interface and its default implementation that represents themes
	  used to style charts and maps.

	* src/main/java/de/intevation/flys/themes/ThemeField.java,
	  src/main/java/de/intevation/flys/themes/DefaultThemeField.java:
	  New. The interface and its default implementation that represents fields
	  in themes. A theme might be "Lines" and one of its field might be
	  "Color" or "Size".

	* src/main/java/de/intevation/flys/themes/ThemeFactory.java: A factory
	  that creates new themes based on a theme configuration.

2011-04-20	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  Implementation of "Abflusskurve/Abflusstafel" calculation.

	  Added method interpolateWQ() which takes an km and results in a
	  tuple of two double arrays containing the w/q values interpolated
	  between the surrounding w/q values of the table.
	  w values are interpolated linear, q values with a cubic spline.

	  Drawing w over q gives you the discharge table at the given km.

	  !!! This code needs testing !!!

2011-04-20	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* pom.xml: Added dependency to Apache Commons Math 2.2 (Apache License 2.0)

2011-04-20	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
	  Fix problem when sorting by q (copied w instead of q).

2011-04-20  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
	  Fixed broken HQL statement.

2011-04-19	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  add a method interpolateW() which takes an array of
	  q values and returns an equal sized array of w values.
	  This is essentially the "Wasserstand/Wasserspiegellagen" calculation
	  of desktop FLYS.

	  If you want to do a calculation with given w values you have
	  to convert the w values with DischargeTables.getQForW() first.

	  !!! This code needs heavy testing !!!

2011-04-19	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
	  We need a getQForW() method and not getWForQ() because when
	  doing a "Wasserstand/Wasserspiegellagen" calculation with given
	  w values these values need to be translated to q values with
	  the master discharge table.

2011-04-19	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
	  Sorting of q values was done wrong.

2011-04-19  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/AnnotationsFactory.java:
	  Ordered the list of annotations returned by this factory based on its
	  range.

2011-04-19  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/services/MainValuesService.java:
	  New. This service returns an XML document that includes the main values
	  of a gauge based on a river name, a start and an end point.

	* doc/conf/conf.xml: Registered the MainValuesService.

2011-04-19  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/MainValuesFactory.java:
	  A factory that provides methods to return MainValues.

2011-04-19	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
	  Added static method getWForQ() to interpolate a w value for
	  a given q value based on a given discharge table.
	
2011-04-19	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
	  Added convenience constructors/methods to ease the access to the master
	  discharge table of a gauge.

2011-04-18	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  Moved the query complexity into view 'wst_value_table' and
	  used this instead.

2011-04-18	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
	  Fetches w/q value tables from the backend. TODO: Move this
	  to the backend and use a view.

2011-04-18  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Changed
	  the error key that is thrown if no input data was found so that the key
	  is usable for GWT's i18n mechanism.

2011-04-18  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java:
	  The inserted river is validated now (overrides validate() of
	  DefaultState).

2011-04-18  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java:
	  The inserted calculation method is validated now (overrides validate()
	  of DefaultState).

2011-04-18  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
	  The input data of feed() are validated using the DefaultStates
	  validate() method.

	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
	  New method validate() that needs to be overidden by concrete subclasses.
	  It should return true, if the data of the State is fine, otherwise it
	  should raise an exception.

	  NOTE: The exceptions are not translated in the server but in the client!

	* src/main/java/de/intevation/flys/artifacts/states/RangeState.java: New.
	  This abstract class exists to provide some methods for handling ranges.
	  Currently, there is a method that validates a given range based on
	  min/max values.

	* src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java,
	  src/main/java/de/intevation/flys/artifacts/states/WQSelect.java:
	  Implemented input data validation for ranges.

	  NOTE: The input validation of concrete values has not been implemented
	  yet!

2011-04-18  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
	  Removed debug code that has been commited by accident :-/

2011-04-18  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: The
	  getGauge() method returns the first gauge based on the given start and
	  end point of the river.

	* src/main/java/de/intevation/flys/artifacts/states/WQSelect.java:
	  Fixed potential bugs: if no gauge could be determined, the default
	  values for W and Q are the minimum and maximum double values.

2011-04-15  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/WQSelect.java: Fills
	  the DESCRIBE with default values for W and Q.

2011-04-15  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/WstFactory.java:
	  New. Returns Wst object - based on a river.

2011-04-15  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Now
	  provides some methods that return some basic objects inserted while
	  parameterization: River, Gauge and so on.

2011-04-15  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java,
	  src/main/java/de/intevation/flys/artifacts/services/RiverService.java:
	  Bugfix: Repaired broken imports of the SessionHolder.

2011-04-15  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/SessionHolder.java:
	  Moved this class to flys-backend.

	* src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java,
	  src/main/java/de/intevation/flys/artifacts/model/GaugesFactory.java,
	  src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java,
	  src/main/java/de/intevation/flys/artifacts/model/AnnotationsFactory.java,
	  src/main/java/de/intevation/flys/artifacts/context/SessionCallContextListener.java:
	  Adapted imports of the SessionHolder.

2011-04-14	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* trunk/src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java,
	  trunk/src/main/java/de/intevation/flys/artifacts/services/RiverService.java:
	  Acquire/release sessions in services to avoid db connection leaks.

2011-04-14  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
	  Changed some method signatures - added a reference to the owner
	  Artifact.

	* src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java,
	  src/main/java/de/intevation/flys/artifacts/states/WQSelect.java,
	  src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java:
	  Modified method signatures based on the changes in DefaultState.

	* src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java:
	  Added default values to the dynamic part of DESCRIBE.

2011-04-14  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java:
	  Added a function that returns a River object based on a given river
	  name.

2011-04-14	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java,
	  src/main/java/de/intevation/flys/artifacts/model/GaugesFactory.java,
	  src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java,
	  src/main/java/de/intevation/flys/artifacts/model/AnnotationsFactory.java:
	  Static methods are using the SessionHolder, too.

2011-04-14  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/context/SessionCallContextListener.java:
	  Added the setup() method that has been added to the interface
	  description in the last commits.

	* doc/conf/conf.xml: Registered the SessionCallContextListener as
	  CallContext.Listener.

2011-04-14  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/SessionHolder.java:
	  Bugfix: Call correct method to retrieve an instance of
	  SessionFactoryProvider.

2011-04-14	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/SessionHolder.java:
	  New. Contains thread local session holder for hibernate sessions.

	* src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java:
	  Uses session from SessionHolder.

	* src/main/java/de/intevation/flys/artifacts/context/SessionCallContextListener.java:
	  Interacts with SessionHolder now.
	
	* src/main/java/de/intevation/flys/exports/ChartExportHelper.java:
	  Removed superfluous import.
	
2011-04-14  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/context/SessionCallContextListener.java:
	  Implementation of a CallContext.Listener to open/close Hibernate
	  Sessions for each request.

2011-04-14  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java,
	  src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
	  Some modifications related to the last commit - modification of the
	  describe() signature of a State.

2011-04-14  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/GaugeSelect.java:
	  Removed. We do not need a state to select a gauge - the selection takes
	  place by choosing a start and an end point.

2011-04-13  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java:
	  Bugfix: added missing label node to root node and a namespace to the
	  data node.

2011-04-12  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  The name of the artifact 'winfo' is written into the DESCRIBE document
	  now. We need this to have a proper way to distinguish between different
	  artifacts in the UI.

2011-04-12  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Bugfix:
	  States are filled with data before they describe themself.

2011-04-11  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/AnnotationsFactory.java:
	  New. A factory that returns the annotations of a specific river.

	* src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java:
	  New. This service provides a document that contains information about
	  distances of a river.

	* doc/conf/conf.xml: Registered the DistanceInfoService.

2011-04-06  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  This collection overrides the out() operation now. The incoming request
	  document is read and the related OutGenerator is used to create the
	  output.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Removed
	  the code to create discharge curves. It has moved to the
	  DischargeCurveGenerator which now does this work.

2011-04-06  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/OutGenerator.java: The
	  generate() method throws an IOException now.

	* src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
	  New. This OutGenerator creates discharge curves.

2011-04-06  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Changed
	  the visibility of the getData() method. It's now public, because the
	  OutGenerator needs an artifact's data.

2011-04-03	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/**/*.java: Removed trailing whitespace.

2011-04-03	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  Make project compilable again by
	  commenting out a not existing XMLDebug reference.

2011-03-31  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java:
	  Added code to parse the configured OutGenerators and to save them (in a
	  map) in the FLYSContext.

	* src/main/java/de/intevation/flys/artifacts/context/FLYSContext.java:
	  Added a key that is used to save the OutGenerators Map in the context.

2011-03-31  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/OutGenerator.java:
	  New. This interface is used to generator different types of output.
	  ArtifactCollections will make use of this interface to create a
	  collected output of all its artifacts.

2011-03-30  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  Removed the Backend from FLYSArtifactCollection - used ArtifactDatabase
	  operations instead.

	* TODO: Removed 'remove Backend reference' TODO.

2011-03-30  Ingo Weinzierl <ingo@intevation.de>

	* doc/conf/artifacts/winfo.xml: Enhanced the configuration of the
	  discharge curve output mode. This output now provides three facets - W,
	  Q and the curve itself.

2011-03-30  Ingo Weinzierl <ingo@intevation.de>

	Tagged RELEASE 0.1

2011-03-30  Ingo Weinzierl <ingo@intevation.de>

	* doc/conf/artifacts/winfo.xml: Renamed an output mode in the WINFO
	  artifact configuration.

2011-03-29  Ingo Weinzierl <ingo@intevation.de>

	* src/main/resources/messages_de_DE.properties,
	  src/main/resources/messages_de.properties: Changed a german string.

2011-03-29  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java:
	  Modified the available calculation modes and its order in the DESCRIBE
	  document.

	* src/main/resources/messages.properties,
	  src/main/resources/messages_de_DE.properties,
	  src/main/resources/messages_en.properties,
	  src/main/resources/messages_de.properties: Adapted the names of
	  calculation modes.

2011-03-28  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  Added the hash code of an artifact to the artifact part of the
	  collection's DESCRIBE document.

2011-03-28  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Changed
	  the background color of discharge curves to white.

2011-03-28	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
	  Cache the scale, too. Otherwise two calls to getValues() with
	  different arguments will result in the same output.

2011-03-28  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
	  Introduced a 'scale' parameter in the getValues() method.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Filled
	  the out() operation with code that draws a discharge table of one or
	  more gauges specified by the given range in entered in a previous state.

2011-03-28  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/exports/ChartExportHelper.java:
	  New. A helper class to exports charts.

	* pom.xml: Added dependencies to iText, Batik and JFreeChart.

2011-03-28	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/importer/PegelGltParser.java:
	  Fixed swap of operands.

2011-03-28	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/GaugesFactory.java:
	  New. Load gauges for a river and filter them for given
	  ranges.

2011-03-25	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
	  Store data in a double [][] instead of interleaved double []
	  to be compatible with org.jfree.data.xy.DefaultXYDataset.

2011-03-25  Ingo Weinzierl <ingo@intevation.de>

	* TODO: Removed 'i18n' and 'step-back' TODOs and added an issue to remove
	  the Backend reference from FLYSArtifactCollection.

2011-03-25  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  Added missing artifact namespace of an attribute in the DESCRIBE
	  document.

2011-03-24  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
	  New. This ArtifactCollection overrides the DefaultArtifactCollection to
	  implement FLYS specific describe() and out() operations.

	* doc/conf/conf.xml: Use the FLYSArtifactCollection instead of the
	  DefaultArtifactCollection for this application.

2011-03-24	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
	  New. Fetches values of discharge tables in form of packed
	  w/q double arrays for given gauges.

	* src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java:
	  Removed needless import.

2011-03-24  Ingo Weinzierl <ingo@intevation.de>

	* src/main/resources/messages_de_DE.properties: Added a german resource
	  bundle to avoid exceptions in the flys artifacts. Sometimes, the
	  Resources class is not able to find a 'de_DE' bundle and throws an
	  exception. This is really strange, because it should use the 'de' bundle
	  in that case, but it doesn't.

2011-03-23  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Added
	  some code to append the output modes of previous states to the DESCRIBE
	  document.

	  TODO: Determine if the current state is already filled with data and
	  append its output modes as well!

2011-03-22  Ingo Weinzierl <ingo@intevation.de>

	* doc/conf/artifacts/winfo.xml: Enhanced the location_distance state with
	  an output mode 'discharge_table'.

2011-03-21  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
	  Write human readable strings as label attribute into the DESCRIBE
	  output. Those labels are used to be displayed in the GUI.

2011-03-21  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java:
	  Added some further calculation types.

	* src/main/resources/messages.properties,
	  src/main/resources/messages_en.properties,
	  src/main/resources/messages_de.properties: Added i18n strings for the
	  calculation types

2011-03-21  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
	  Implemented the step-back part of the advance() operation.

2011-03-21  Ingo Weinzierl <ingo@intevation.de>

	* src/main/resources/messages_de.properties: Fixed a german umlaut.

2011-03-18  Ingo Weinzierl <ingo@intevation.de>

	* doc/conf/artifacts/winfo.xml: Added new states for entering a
	  location/distance and w/q.

	* src/main/resources/messages.properties,
	  src/main/resources/messages_en.properties,
	  src/main/resources/messages_de.properties: New string for the
	  location/distance and w/q input states.

2011-03-18  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/WQSelect.java:
	  New. A state for the W/Q input of the WINFO parameterization.

2011-03-18  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
	  Append an attribute 'uiprovider' to the dynamic UI node.

	* src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java:
	  New. A state for the location/distance selection of the WINFO
	  parameterization.

2011-03-17  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
	  Added a new method getUIProvider() that might be overriden by concreted
	  subclasses that should be rendered with a specific UIProvider.

2011-03-17  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  The static UI part is created by the previous states now. This makes it
	  possible to group the data objects (which is necessary to group the
	  objects in the ui).

	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
	  Added a describeStatic() method that creates a node that contains the
	  data of that state.

2011-03-17  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/services/RiverService.java:
	  Removed TODO: the document contains the rivers provided by the backend
	  now.

2011-03-17	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* pom.xml: Added dependency to flys backend.

	* src/main/java/de/intevation/flys/artifacts/model/River.java:
	  Removed. We are using the backend model now.

	* src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java:
	  Fetches the rivers from the backend.

	* src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java:
	  Import fixes.

2011-03-15	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* doc/conf/conf.xml: Added section for database backend configuration.

2011-03-15	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java:
	  Fixed build error coming from different import of XMLUtils.

2011-03-14  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
	  Appended the missing label node that contains the human readable name of
	  the data item.

2011-03-14  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java,
	  src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
	  I18N of strings for the DESCRIBE document.

	* src/main/resources/messages.properties,
	  src/main/resources/messages_en.properties,
	  src/main/resources/messages_de.properties: I18N strings for the
	  calculcation mode state.

2011-03-14  Ingo Weinzierl <ingo@intevation.de>

	* doc/conf/artifacts/winfo.xml: Modified the winfo states.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Adapted
	  the artifact regarding the changes of the last commit. The states
	  describe() method creates the dynamic UI node - the artifact needs to
	  apply this node.

	* src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java:
	  New. The state for choosing the calculation mode.

	* src/main/resources/messages.properties,
	  src/main/resources/messages_en.properties,
	  src/main/resources/messages_de.properties: Added i18n strings for the
	  calculation mode state.

2011-03-14  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
	  New. This is the base state for the FLYS application. It provides a
	  method that creates the dynamic ui node for the DESCRIBE.

	* src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java,
	  src/main/java/de/intevation/flys/artifacts/states/GaugeSelect.java: Both
	  classes extend the abstract base class DefaultState.

2011-03-14  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/resources/Resources.java:
	  New. This class retrieves the i18n strings from a ResourceBundle.

	* src/main/resources/messages.properties,
	  src/main/resources/messages_en.properties,
	  src/main/resources/messages_de.properties: Resource files for german and
	  english translation.

2011-03-10  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Appended
	  the data that have been inserted in former states into the static node
	  of the DESCRIBE.

2011-03-10  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: The
	  operations feed() and advance() return the description of the artifact
	  using the describe() operation. This avoids additional server round trips
	  in the client - the clients gets to know about the new state of the
	  artifact immediately.

2011-03-10  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
	  Implemented a part (step forward) of the advance operation.

	* TODO: Implement Step-Back in advance operation.

2011-03-09  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
	  Implemented the abstract method getName(). It returns the constant
	  'winfo' string.

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
	  Implemented the feed action. The data of an incoming feed() operation is
	  stored in StateData objects that are saved in a map in the artifact.

	  NOTE: There is no input validation and no i18n of error messages (see
	  TODO).

2011-03-09  Ingo Weinzierl <ingo@intevation.de>

	* TODO: This file contains some open points that need to be done.

2011-03-09  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: New. This
	  artifact serves as the default artifact for the FLYS application.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: This
	  artifact now inherits from FLYSArtifact. Furthermore, there is one big
	  change: we don't store the State objects itself in the artifact, but
	  just the identifier of those. This makes the artifact smaller and more
	  compatible agains previous versions of the software.

2011-03-08  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/services/RiverService.java:
	  New. This service will retrieve a list of provided rivers.

	* doc/conf/conf.xml: Added a configuration for the RiverService.

2011-03-07  Ingo Weinzierl <ingo@intevation.de>

	* doc/conf/conf.xml: Added a section user-factory and collection-factory in
	  the factories part of the configuration.

2011-03-01  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java:
	  Replaced the 'special' attribute from DESCRIBE with a 'uiprovider'
	  attribute.

2011-02-08  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: The
	  RiverSelect state is called to create the UI part of the describe
	  document.

	* src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java:
	  Implemented the dynamic UI part of describe(). The static part is not
	  inserted into the describe document at the moment. We need a reference to
	  the previous states for this.

2011-02-08  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java,
	  src/main/java/de/intevation/flys/artifacts/model/River.java: New. A model
	  class that represents a river and its factory to create concrete river
	  instances.
	  NOTE: Currently, this is just a mockup. The factory just returns two
	  static rivers "Mosel" and "Saar" without a connection to a backend.

2011-02-07  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/StateFactory.java: The
	  input data of a state is initialized with empty StateData objects after
	  the State has been created.

	* doc/conf/artifacts/winfo.xml: Renamed the input data nodes of the states
	  which now fits better to the class name of the implementation.

2011-02-07  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: The
	  describe document returned by this artifact now contains the current state
	  and the reachable states.

2011-02-07  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java:
	  The transitions are put into the TransitionEngine with the ID of the state
	  - not longer with the artifact name. On this way, we are able to fetch
	  just the transitions for a specific state, instead of all the transitions
	  of an artifact.

2011-02-04  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Describe()
	  returns the artifact's uuid and hash value. The whole implementation of
	  describe() is still outstanding.

2011-02-04  Ingo Weinzierl <ingo@intevation.de>

	* doc/conf/artifacts/winfo.xml: Removed useless config stuff.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Removed
	  useless methods, and improved the init process - the first state is set as
	  the current state for this artifact.

	* src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java,
	  src/main/java/de/intevation/flys/artifacts/states/GaugeSelect.java: New.
	  The states are used in the first two steps of the WINFOArtifact.
	  Currently, they just implement stubs of the necessary methods setup() and
	  describe().

2011-02-04  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/State.java,
	  src/main/java/de/intevation/flys/artifacts/transitions/TransitionEngine.java,
	  src/main/java/de/intevation/flys/artifacts/transitions/Transition.java:
	  Removed. These classes are placed in the artifact-database now.

	* src/main/java/de/intevation/flys/artifacts/transitions/DefaultTransition.java,
	  src/main/java/de/intevation/flys/artifacts/transitions/TransitionFactory.java:
	  Adapted imports of Transition.

	* src/main/java/de/intevation/flys/artifacts/states/StateFactory.java: New.
	  This factory should be used to create concrete State objects.

	* src/main/java/de/intevation/flys/artifacts/context/FLYSContext.java: Added
	  a constant key to store the StateEngine in the context.

	* src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java:
	  New method that initializes the states at application start.

2011-02-03  Ingo Weinzierl <ingo@intevation.de>

	* src/main/java/de/intevation/flys/artifacts/states/State.java: New. The
	  interface description of a state.

	* src/main/java/de/intevation/flys/artifacts/transitions/Transition.java,
	  src/main/java/de/intevation/flys/artifacts/transitions/DefaultTransition.java:
	  New. The interface description and a default implementation of a
	  transition.

	* src/main/java/de/intevation/flys/artifacts/transitions/TransitionEngine.java:
	  New. The TransitionEngine stores all transitions for each artifact and
	  should be used to determine, if an artifact can advance from one state to
	  another.

	* src/main/java/de/intevation/flys/artifacts/transitions/TransitionFactory.java:
	  New. Transitions should be created by using this class.

	* src/main/java/de/intevation/flys/artifacts/context/FLYSContext.java: New.
	  The Flys context. It currently defines keys to store important components
	  in the context.

	* src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java:
	  New. The context factory initializes the basic components of the
	  application. Currently, the TransitionEngine is created and all artifacts
	  with its transitions are read from the global configuration and stored in
	  the FLYSContext.

	* pom.xml: Added a dependency to the 'artifacts-common' package.

	* doc/conf/artifacts/winfo.xml: Corrected the classname of the
	  DefaultTransition.

	* doc/conf/conf.xml: Added FLYSContextFactory as context-factory.

2011-02-02  Ingo Weinzierl <ingo@intevation.de>

	* doc/conf/conf.xml: An initial configuration file for the FLYS artifact
	  server.

	* doc/conf/artifacts/winfo.xml: An initial transition configuration of an
	  WINFO artifact.

	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: A stub of
	  an artifact for a WINFO parameterization.

	* pom.xml: Set the source code version to 1.5.

2011-02-01	Sascha L. Teichmann	<sascha.teichmann@intevation.de>

	* src/**, pom.xml: Added initial maven project.
	* ChangeLog: new.

http://dive4elements.wald.intevation.org