Mercurial > dive4elements > river
view flys-artifacts/doc/datacage-config-manual/Makefile @ 4837:9e25c7523485
Fixed calculation of effective width in MINFO SQ relation.
* Get all (including empty datasets) from db.
* Filter empty datasets when processing data of the same date.
* Added debug outputs.
| author | Raimund Renkert <rrenkert@intevation.de> |
|---|---|
| date | Wed, 23 Jan 2013 11:14:41 +0100 |
| parents | 43a2b1e7bc0d |
| children |
line wrap: on
line source
# Copyright 2004 Chris Monson (shiblon@gmail.com) # Latest version available at http://www.bouncingchairs.net/oss # # This file is part of ``Chris Monson's Free Software''. # # ``Chris Monson's Free Software'' is free software; you can redistribute it # and/or modify it under the terms of the GNU General Public License as # published by the Free Software Foundation, Version 2. # # ``Chris Monson's Free Software'' is distributed in the hope that it will # be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General # Public License for more details. # # You should have received a copy of the GNU General Public License along # with ``Chris Monson's Free Software''; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # # It is also available on the web at http://www.gnu.org/copyleft/gpl.html # # Note that using this makefile to build your documents does NOT place them # under the GPL unless you, the author, specifically do so. In other words, # I, Chris Monson, the copyright holder and author of this makefile, # consider it impossible to ``link'' to this makefile in any way covered by # the GPL. # # TO OBTAIN INSTRUCTIONS FOR USING THIS FILE, RUN: # make help # fileinfo := LaTeX Makefile author := Chris Monson version := 2.2.0-rc1 # # Note that the user-global version is imported *after* the source directory, # so that you can use stuff like ?= to get proper override behavior. .PHONY: Makefile GNUmakefile Makefile.ini $(HOME)/.latex-makefile/Makefile.ini -include Makefile.ini -include $(HOME)/.latex-makefile/Makefile.ini # # This can be pdflatex or latex - you can change this by adding the following line to your Makefile.ini: # BUILD_STRATEGY := latex BUILD_STRATEGY ?= pdflatex # # Sets LC_ALL=C, by default, so that the locale-aware tools, like sort, be # # immune to changes to the locale in the user environment. export LC_ALL ?= C # # # If you specify sources here, all other files with the same suffix # will be treated as if they were _include_ files. #onlysources.tex ?= main.tex #onlysources.tex.sh ?= #onlysources.tex.pl ?= #onlysources.tex.py ?= #onlysources.rst ?= #onlysources.fig ?= #onlysources.gpi ?= #onlysources.dot ?= #onlysources.xvg ?= #onlysources.svg ?= #onlysources.eps.gz ?= #onlysources.eps ?= # # If you list files here, they will be treated as _include_ files #includes.tex ?= file1.tex file2.tex #includes.tex.sh ?= #includes.tex.pl ?= #includes.tex.py ?= #includes.rst ?= #includes.fig ?= #includes.gpi ?= #includes.dot ?= #includes.xvg ?= #includes.svg ?= #includes.eps.gz ?= #includes.eps ?= # # If you list files or wildcards here, they will *not* be cleaned - default is # to allow everything to be cleaned. #neverclean ?= *.pdf # # Alternatively (recommended), you can add those lines to a Makefile.ini file # and it will get picked up automatically without your having to edit this # Makefile. # # KNOWN ISSUES: # * The following occurs: # file with: \usepackage{named}\bibliographystyle{named} # Compile # change to: \usepackage{apalike}\bibliographystyle{apalike} # Compile again -- BARF! # # The workaround: make clean-nographics; make # # Note that we may not be able to fix this. LaTeX itself barfs # on this, not the makefile. The very first invocation of LaTeX # (when something like this has happened) reads the existing .aux # file and discovers invalid commands like \citeauthoryear that # are only valid in the package that was just removed. It then # tries to parse them and explodes. It's not at all clear to me # how to fix this. I tried removing the .aux files on the first # run of LaTeX, but that necessarily requires more subsequent # rebuilds on common edits. There does not appear to be a # graceful solution to this issue. # # CHANGES: # Chris Monson (2010-04-08): # * Bumped version to 2.2.0-rc1 # * Added back in the rst_style_file stuff that got broken when switching # rst -> tex to use the script mechanism # Chris Monson (2010-03-23): # * Bumped version to 2.2.0-beta8 # * Work on issue 76: bad backtick escape for some sed versions, failure # to clear out the hold buffer when outputting MISSING comment. # - Backed out 2>&1 to &> (doesn't work in sh) # - Backed out using . to source variables # Chris Monson (2010-03-22): # * Bumped version to 2.2.0-beta7 # * Issue 72: Fix latex/bibtex invocation order for annotated bib styles # * Fixed informational output to reflect which LaTeX run we're on # * Fixed graphic detection to include graphics that are already there in # .d files # * Tightened up the .d file output to only make .d depend on graphic # *source* files. This means that building foo.d no longer # builds all of the graphics files on which foo.tex depends. # Had to use .SECONDEXPANSION trickery to make it work. # * Changed get-graphics to only accept a stem. # * Fixed build-once logic for scripted .tex to work better # * Made get-inputs sed script more maintainable. # * Moved Makefile.ini import up higher. # * Changed bare stems to not recursively invoke make # * Updated diff output to be more silent everywhere # * Added a MISSING comment to the .d file if stuff isn't found - forces # removal of .1st.make file, which often forces it to try again. # * Fixed broken graphics-target function # * Added sleep to .d file generation when stuff is missing - if it # builds too fast, make doesn't realize it needs to be reloaded, # and thus never discovers some deeper dependencies (especially # evident when graphics are included from scripted include # files). # Chris Monson (2010-03-17): # * Bumped version to 2.2.0-beta6 # * Fixed bareword builds to actually work (requires static patterns) # * Fixed colorization to work with new paragraph stuff # Chris Monson (2010-03-17): # * Bumped version to 2.2.0-beta5 # * Fixed graphic detection to be much more focused - splits log file # into paragraphs before doing pattern matching. # * Fixed make foo to work properly (recursively calls make foo.pdf) # * Fixed gpi -> pdf generation to not waste time building .eps *after* # the pdf already exists. # * Changed log copies to include MAKE_RESTARTS as part of the name. # * Fixed missing include file detection (also makes use of the paragraph # stuff) to detect missing scripted include files. # Chris Monson (2010-03-16): # * Bumped version to 2.2.0-beta4 # * issue 70: .pdf not moved out of the way properly on first # compilation, resulting in early error detection failure. # * issue 74: fixed broken error on missing .aux files: the # implementation was masking real errors. # Chris Monson (2010-03-15): # * Bumped version to 2.2.0-beta3 # * issue 71: Made the tput dependency optional # * issue 73: Made .tex targets not pull in .d files (building them from # scripts should not require a .d) # * issue 74: Output a much saner error when a .aux file is not produced # (e.g., when you are typing "make" without arguments in a # directory with included .tex files that are not named with # ._include_.) # Chris Monson (2010-03-11): # * Bumped version to 2.2.0-beta2 # * Fixed clean-graphics to get rid of intermediate .eps files that may # be hanging around # * Added an automatic setting to use eps terminals in pdflatex mode for # gnuplot if it doesn't understand pdf. # * issue 66: Removed grayscale generation via magic suffix. Grayscale # generation is now only available via GRAY=1 # * issue 68: Added explicit handling of LC_ALL for locale-aware tools # like "sort" # Chris Monson (2010-03-10): # * Bumped version to 2.2.0-beta1 # * Fixed success message to handle output message in different places # * Added name of produced file to success message # Chris Monson (2010-03-10): # * Bumped version to 2.2.0-alpha3 # * Added meaningful error message for wrong hyperref options # * Added meaningful error message for incorrect graphics extensions # Chris Monson (2010-03-09): # * Bumped version to 2.2.0-alpha2 # * Updated graphics handling (gnuplot and fig generate pdf natively) # * Changed xmgrace to output monochrome natively # Chris Monson (2010-03-09): # * Bumped version to 2.2.0-alpha1 - major change! # * Support pdflatex natively and by default (issue 6 - a long time coming) # * Add ability to have a single $HOME/.latex-makefile/Makefile.ini for # all invocations # * Reworked graphic inclusion detection so that extensions need not be # specified for either build strategy (e.g., # \includegraphics{test1.eps} -> \includegrahpics{test1}) # * Changed log format to include filenames and line numbers # Chris Monson (2010-02-04): # * Bumped version to 2.1.43 # * All of the following are for issue 63 (thanks to mojoh81): # * Added documentation about fixing Makefile.ini default target # * Added perl and python script targets # * Fixed run logic to allow included .tex files to be scripted (the # run-again logic now detects missing .tex files, and the MV # command has been switched out for a command that only invokes # MV if the files exist) # * Changed scripted generation to only run once per make invocation # * Added dependency on expr # Chris Monson (2010-01-19): # * Bumped version to 2.1.42 # * issue 62: Added .brf extension to cleanable files (backrefs) # Chris Monson (2010-01-07): # * Bumped version to 2.1.41 # * issue 60: bad makeindex runs now error out on subsequent tries # Chris Monson (2009-12-01): # * Bumped version to 2.1.40 # * issue 36: build all indices (for e.g., splitidx usage) # * issue 59: clean up all generated files (including indices) # Chris Monson (2009-11-23): # * Bumped version to 2.1.39 # * issue 57: change ps2pdf invocations to just use gs directly # Chris Monson (2009-11-19): # * Bumped version to 2.1.38 # * issue 57: Added some limited support for Cygwin (spaces in filenames) # Chris Monson (2009-11-15): # * Bumped version to 2.1.37 # * Removed svninfo, since this is now managed by mercurial # * Fixed typo in changelist # * Issue 52: added jpg->eps conversion (thanks to brubakee) # * Issue 54: fix missing Overfull colorization due to lack of a blank # line preceding the first error. # * Issue 51: remove head.tmp and body.tmp in make clean invocation # * Issue 56: maintain multiple versions of log files (for debugging) # Chris Monson (2009-11-14): # * Bumped version to 2.1.36 # * Issues 53 and 49: added .brf, .mtc, and .maf to the cleanables # Chris Monson (2009-11-05): # * Bumped version to 2.1.35 # * Added nomenclature support (see issue 48) # Chris Monson (2009-10-29): # * Bumped version to 2.1.34 # * Fixed _out_ creation bug introduced in 2.1.33 (it was always created) # * Fixed erroneous help output for $HOME in BINARY_TARGET_DIR # * Changed contact email address - bring on the spam! # Chris Monson (2009-10-21): # * Bumped version to 2.1.33 # * Fixed issue 46, adding support for dot2tex (thanks to fdemesmay) # * Made all_files.* settable in Makefile.ini (using ?= instead of :=) # * Fixed issue 47, thanks to fdemesmay: add binary copy directory, copy # dvi, pdf, and ps if it exists # Chris Monson (2009-09-25): # * Bumped version to 2.1.32 # * Fixed so that a changed lol file will cause a rebuild # * Added .lol files to the cleanable list # Chris Monson (2009-09-08): # * Bumped version to 2.1.31 # * Closed issue 43: evince doesn't notice pdf change w/out touch # Chris Monson (2009-08-28): # * Bumped version to 2.1.30 # * Closed issue 39: Capture multi-line log warnings/errors to output # Chris Monson (2009-08-26): # * Bumped version to 2.1.29 # * Closed issue 42: add svg support using inkscape # Chris Monson (2009-08-17): # * Bumped version to 2.1.28 # * Patch from paul.biggar for issue 38: package warnings are overlooked # Chris Monson (2009-08-07): # * Bumped version to 2.1.27 # * Included patch for issue 37 - removes pdf/ps files before copying, # allowing some broken viewers to see changes properly. # Chris Monson (2009-05-15): # * Bumped version to 2.1.26 # * Included patch for issue 9 from favonia - detects .fig changes for # pstex files during regular compilation, so long as the pstex # has been built at least once with make all-pstex. # Chris Monson (2009-03-27): # * Bumped version to 2.1.25 # * Cleaned up a bunch of variable setting stuff - more stuff is now # settable from Makefile.ini # * Cleaned up documentation for various features, especially settable # variables. # * issue 28: support for png -> eps conversion (it even looks good!) # * issue 29: support for "neverclean" files in Makefile.ini # * issue 30: make ps2pdf14 the default - fall back when not there # Chris Monson (2009-03-09): # * Bumped version to 2.1.24 # * issue 27: xmgrace support (thanks to rolandschulzhd) # Chris Monson (2008-10-23): # * Bumped version to 2.1.23 # * issue 23: fixed _check_programs to not use bash string subs # Chris Monson (2008-09-02): # * Bumped version to 2.1.22 # * Appled patch from Holger <yllohy@googlemail.com> to add include # sources and some documentation updates. # * Updated backup_patterns to be a bit more aggressive (also thanks to # Holger) # Chris Monson (2008-08-30): # * Bumped version to 2.1.21 # * Added ability to specify onlysources.* variables to indicate the only # files that should *not* be considered includes. Thanks to Holger # <yllohy@googlemail.com> for this patch. # * Added an automatic include of Makefile.ini if it exists. Allows # settings to be made outside of this makefile. # Chris Monson (2008-05-21): # * Bumped version to 2.1.20 # * Added manual pstex compilation support (run make all-pstex first) # * Removed all automatic pstex support. It was totally breaking # everything and is very hard to incorporate into the makefile # concept because it requires LaTeX to *fail* before it can # determine that it needs the files. # Chris Monson (2008-04-17): # * Bumped version to 2.1.19 # * Changed the pstex build hack to be on by default # Chris Monson (2008-04-09): # * Bumped version to 2.1.18 # * issue 16: fixed pstex build problems, seems nondeterministic. Added # gratuitious hack for testing: set PSTEX_BUILD_ALL_HACK=1. # Chris Monson (2008-04-09): # * Bumped version to 2.1.17 # * issue 20: fixed accumulation of <pid>*.make files - wildcard was # refusing to work on files that are very recently created. # Chris Monson (2008-04-02): # * Bumped version to 2.1.16 # * issue 19: Removed the use of "type" to fix broken "echo" settings # Chris Monson (2008-03-27): # * Bumped version to 2.1.15 # * issue 18: Favors binary echo over builtin, as binary understands -n # * issue 16: Fixed handling of missing pstex_t files in the log # * issue 9: Added .SECONDARY target for .pstex files # Chris Monson (2008-03-21): # * Bumped version to 2.1.14 # * Fixed broken aux file flattening, which caused included bibs to be # missed. # Chris Monson (2008-03-20): # * Bumped version to 2.1.13 # * Changed error output colorization to show errors for missing files # that are not graphics files. # Chris Monson (2008-03-20): # * Bumped version to 2.1.12 # * Fixed a regression introduced in r28 that makes bibtex fail when # there is no index file present # Chris Monson (2008-03-03): # * Bumped version to 2.1.11 # * Fixed issue 11 (handle index files, reported by abachn) # * Cleaned up some comments and help text # Chris Monson (2008-01-24): # * Bumped version to 2.1.10 # * Fixed to work when 'sh' is a POSIX shell like 'dash' # Chris Monson (2007-12-12): # * Bumped version to 2.1.9 # * Fixed documentation and dependency graph for pstex files # Chris Monson (2007-12-12): # * Bumped version to 2.1.8 # * Added basic pstex_t support for fig files (Issue 9 by favonia) # I still suggest that psfrag be used instead. # Chris Monson (2007-10-16): # * Bumped version to 2.1.7 # * Removed todo item: allow other comment directives for rst conversion # * Added ability to use global rst style file _rststyle_._include_.tex # * Added help text to that effect # Chris Monson (2007-05-20): # * Bumped version to 2.1.6 # * Changed default paper size for rst files # * Added todo item: fix paper size for rst files # * Added todo item: allow other comment directives for rst conversion # Chris Monson (2007-04-02): # * Bumped version to 2.1.5 # * Addressed Issue 7, incorrect .gpi.d generation in subdirectories # Chris Monson (2007-03-28): # * Bumped version to 2.1.4 # * Fixed syntax error in dot output # Chris Monson (2007-03-01): # * Bumped version to 2.1.3 # * Added reST to the included documentation # * Fixed graphics and script generation to be settable in the # environment. # Chris Monson (2007-02-23): # * Bumped version to 2.1.2 # * Added the ability to generate .tex files from .rst files # Chris Monson (2006-10-17): # * Bumped version to 2.1.1 # * Fixed includes from subdirectories (sed-to-sed slash escape problem) # Chris Monson (2006-10-05): # * Bumped version to 2.1.0 (pretty serious new feature added) # * New feature: bib files can now be anywhere on the BIBINPUTS path # * New programs: kpsewhich (with tetex) and xargs (BSD) # Chris Monson (2006-09-28): # * Bumped version to 2.0.9 # * Added ability to parse more than one bibliography # Chris Monson (2006-06-01): # * Bumped version to 2.0.8 # * Added .vrb to the list of cleaned files # Chris Monson (2006-04-26): # * Bumped version to 2.0.7 # * Fixed so that clean-nographics does not remove .gpi.d files # * Removed jpg -> eps hack (not working properly -- just pre-convert) # * Fixed so that postscript grayscale can be done with BSD sed # Chris Monson (2006-04-25): # * Bumped version to 2.0.6 # * Fixed so that changed toc, lot, lof, or out causes a rebuild # Chris Monson (2006-04-17): # * Bumped version to 2.0.5 # * Added jpg -> eps conversion target # Chris Monson (2006-04-12): # * Bumped version to 2.0.4 # * Fixed BSD sed invocation to not use \| as a branch delimiter # * Added a comment section on what is and is not allowed in BSD sed # * Made paper size handling more robust while I was at it # * Fixed postscript RGB grayscale to use a weighted average # * Fixed postscript HSB grayscale to convert to RGB first # * Fixed a problem with rebuilding .bbl files # Chris Monson (2006-04-11): # * Bumped version to 2.0.3 # * Fixed some BSD sed problems: can't use \n in substitutions # Chris Monson (2006-04-10): # * Bumped version to 2.0.2 # * Once again removed ability to create .tex files from scripts # * \includeonly works again # Chris Monson (2006-04-09): # * Bumped version to 2.0.1 # * Fixed grayscale postscript handling to be more robust # * Added ability to generate ._gray_. files from eps and eps.gz # * Added ability to clean ._gray_.eps files created from .eps files # Chris Monson (2006-04-07): # * Bumped version to 2.0.0 # * Removed clunky ability to create included .tex files from scripts # * Added note in the help about included tex scripting not working # * Fixed the .eps generation to delete %.gpihead.make when finished # * Abandoned designs to use shell variables to create sed scripts # * Abandoned __default__.tex.sh idea: it causes recursion with %: . # * Removed web page to-do. All items are now complete. # * Added better grayscale conversion for dot figures (direct ps fixup). # * Include files can now be scripted (at the expense of \includeonly). # * Updated dependency graph to contain better node names. # Chris Monson (2006-04-06): # * Bumped version to 2.0b3 # * Top level includes now fail if there is no rule to build them # * A helpful message is printed when they do fail # * Grayscale has been changed to be ._gray_, other phonies use _ now, too # * Grayscale handling has been completed # * Changed _include_stems target to _includes target. # * Fixed _includes target to be useful by itself. # * Removed the ability to specify clean and build targets at once # * Verified that epsfig works fine with current code # * Fixed included scripts so that they are added to the dep files # * Fixed so that graphics includes don't happen if they aren't for gpi # * Fixed dot output to allow grayscale. # Chris Monson (2006-04-05): # * Bumped version to 2.0b2 # * Removed automatic -gray output. It needs fixing in a bad way. # * Revamped dependency creation completely. # * Fixed conditional inclusion to actually work (test.nobuild.d, test.d). # * Fixed clean target to remove log targets # * Added the 'monochrome' word for gray gpi output # * Added a _check_gpi_files target that checks for common problems # * Changed the _version target into the version target (no _) # * Added better handling of grayscale files. Use the .gray.pdf target. # * Fixed testing for rebuilds # Chris Monson (2006-04-04): # * Bumped version to 2.0b1 # * Changed colorization of output # * Made .auxbbl and .auxtex .make files secondary targets # * Shortened and simplified the final latex invocation loop # * Added version-specific output ($$i vs. $$$$i) in latex loop # * Added a build message for the first .dvi run (Building .dvi (0)) # * Removed some build messages that most people don't care about. # * Simplified procedure for user-set colors -- simple text specification # * Fixed diff output to...not output. # * Fixed rerun bug -- detect not only when preceded with LaTeX Warning # * Sped up gpi plotting # * Added error handling and colorized output for gpi failure # * Documented color changing stuff. # * Now sort the flattened aux file to avoid false recompilation needs # * Added clean-nographics target # * Don't remove self.dvi file if self.aux is missing in the log # * Clarified some code. Did some very minor adjusting. # Chris Monson (2006-04-03): # * Bumped version to 2.0a7 # * Added .dvi and .ps files as secondary files. # * Fixed handling of multiple run detection when includeonly is in use. # * Added code to flatten .aux files. # * Added more files as .SECONDARY prerequisites to avoid recompilation. # * Fixed the inputs generation to be much simpler and to use pipes. # * Added the dependency graph directly into the makefile. # * Changed flatten-aux to remove \@writefile \relax \newlabel, etc. # * Undid pipe changes with sed usage (BSD sed doesn't know -f-). # * Added a _check_programs target that tells you what your system has. # * Fixed an error in colorization that made unnecessary errors appear # * Added view targets. # * Updated help text. # * Augmented cookies so that .aux can trigger .bbl and .dvi rebuilds # * Added more informative error handling for dvips and ps2pdf # Chris Monson (2006-04-02): # * Bumped version to 2.0a6 # * Added indirection to .bbl dependencies to avoid rebuilding .bbl files # * Streamlined the diff invocation to eliminate an existence test # * Removed special shell quote escape variables # * Moved includes to a more prominent location # * Fixed .inputs.make to not contain .aux files # * Fixed embedding to use a file instead of always grepping. # * Added *.make.temp to the list of cleanable files # * Fixed Ruby. It should now be supported properly. # * Now differentiate between all, default, and buildable files. # * Fixed to bail out on serious errors. # * Revised the handling of includable files. Still working on it. # Chris Monson (2006-03-31): # * Bumped version to 2.0a5 # * Fixed a bug with LaTeX error detection (there can be spaces) # * Added .bbl support, simplifying everything and making it more correct # * Refactored some tests that muddy the code # * Did a little cleanup of some shell loops that can safely be make loops # * Added support for graphviz .dot files # * Made _all_programs output easier to read # * Added the ruby support that has long been advertised # * Font embedding was screwed up for PostScript -- now implicit # * Changed the generation of -gray.gpi files to a single command # * Changed any make-generated file that is not included from .d to .make # Chris Monson (2006-03-30): # * Bumped version to 2.0a4 # * Fixed a bug with very long graphics file names # * Added a todo entry for epsfig support # * Fixed a bug paper size bug: sometimes more than one entry appears # * Fixed DVI build echoing to display the number instead of process ID # * DVI files are now removed on first invocation if ANY file is missing # * Added a simple grayscale approach: if a file ends with -gray.gpi, it # is created from the corresponding .gpi file with a special # comment ##GRAY in its header, which causes coloring to be # turned off. # * Fixed a bug in the handling of .tex.sh files. For some reason I had # neglected to define file stems for scripted output. # * Removed a trailing ; from the %.graphics dependencies # * Added dvips embedding (I think it works, anyway) # Chris Monson (2006-03-29): # * Bumped version to 2.0a3 # * Fixed error in make 3.79 with MAKEFILE_LIST usage # * Added the presumed filename to the _version output # * Added a vim macro for converting sed scripts to make commands # * Added gpi dependency support (plotting external files and loading gpi) # * Allow .gpi files to be ignored if called .include.gpi or .nobuild.gpi # * Fixed sed invocations where \+ was used. BSD sed uses \{1,\}. # Chris Monson (2006-03-28): # * Bumped version to 2.0a2 # * Added SHELL_DEBUG and VERBOSE options # * Changed the default shell back to /bin/sh (unset, in other words) # * Moved .PHONY declarations closer to their targets # * Moved help text into its own define block to obtain better formatting # * Removed need for double-entry when adding a new program invocation # * Moved .SECONDARY declaration closer to its relevant occurrence # * Commented things more heavily # * Added help text about setting terminal and output in gnuplot # * Created more fine-grained clean targets # * Added a %.graphics target that generates all of %'s graphics # * Killed backward-compatible graphics generation (e.g., eps.gpi=gpi.eps) # * For now, we're just GPL 2, not 3. Maybe it will change later # * Made the version and svninfo into variables # Chris Monson (2006-03-27): # * Bumped version to 2.0a1 # * Huge, sweeping changes -- automatic dependencies # IMPORTANT! # # When adding to the following list, do not introduce any blank lines. The # list is extracted for documentation using sed and is terminated by a blank # line. # # EXTERNAL PROGRAMS: # = ESSENTIAL PROGRAMS = # == Basic Shell Utilities == CAT ?= cat CP ?= cp -f DIFF ?= diff ECHO ?= echo EGREP ?= egrep ENV ?= env EXPR ?= expr MV ?= mv -f SED ?= sed SORT ?= sort TOUCH ?= touch UNIQ ?= uniq WHICH ?= which XARGS ?= xargs SLEEP ?= sleep # == LaTeX (tetex-provided) == BIBTEX ?= bibtex DVIPS ?= dvips LATEX ?= latex PDFLATEX ?= pdflatex EPSTOPDF ?= epstopdf MAKEINDEX ?= makeindex KPSEWHICH ?= kpsewhich GS ?= gs # = OPTIONAL PROGRAMS = # == Makefile Color Output == TPUT ?= tput # == TeX Generation == PERL ?= perl PYTHON ?= python RST2LATEX ?= rst2latex.py # == EPS Generation == CONVERT ?= convert # ImageMagick DOT ?= dot # GraphViz DOT2TEX ?= dot2tex # dot2tex - add options (not -o) as needed FIG2DEV ?= fig2dev # XFig GNUPLOT ?= gnuplot # GNUplot INKSCAPE ?= inkscape # Inkscape (svg support) XMGRACE ?= xmgrace # XMgrace PNGTOPNM ?= pngtopnm # From NetPBM - step 1 for png -> eps PPMTOPGM ?= ppmtopgm # From NetPBM - (gray) step 2 for png -> eps PNMTOPS ?= pnmtops # From NetPBM - step 3 for png -> eps GUNZIP ?= gunzip # GZipped EPS # == Beamer Enlarged Output == PSNUP ?= psnup # == Viewing Stuff == VIEW_POSTSCRIPT ?= gv VIEW_PDF ?= xpdf VIEW_GRAPHICS ?= display # Command options for embedding fonts and postscript->pdf conversion PS_EMBED_OPTIONS ?= -dPDFSETTINGS=/printer -dEmbedAllFonts=true -dSubsetFonts=true -dMaxSubsetPct=100 PS_COMPATIBILITY ?= 1.4 # Defaults for GPI DEFAULT_GPI_EPS_FONTSIZE ?= 22 DEFAULT_GPI_PDF_FONTSIZE ?= 12 # Style file for ReST RST_STYLE_FILE ?= $(wildcard _rststyle_._include_.tex) # This ensures that even when echo is a shell builtin, we still use the binary # (the builtin doesn't always understand -n) FIXED_ECHO := $(if $(findstring -n,$(shell $(ECHO) -n)),$(shell which echo),$(ECHO)) ECHO := $(if $(FIXED_ECHO),$(FIXED_ECHO),$(ECHO)) define determine-gnuplot-output-extension $(if $(shell $(WHICH) $(GNUPLOT)), $(if $(findstring unknown or ambiguous, $(shell $(GNUPLOT) -e "set terminal pdf" 2>&1)), eps, pdf), none) endef GNUPLOT_OUTPUT_EXTENSION ?= $(strip $(call determine-gnuplot-output-extension)) # Directory into which we place "binaries" if it exists. # Note that this can be changed on the commandline or in Makefile.ini: # # Command line: # make BINARY_TARGET_DIR=$HOME/pdfs myfile.pdf # # Also, you can specify a relative directory (relative to the Makefile): # make BINARY_TARGET_DIR=pdfs myfile.pdf # # Or, you can use Makefile.ini: # # BINARY_TARGET_DIR := $(HOME)/bin_out # BINARY_TARGET_DIR ?= _out_ RESTARTS := $(if $(MAKE_RESTARTS),$(MAKE_RESTARTS),0) # SH NOTES # # On some systems, /bin/sh, which is the default shell, is not linked to # /bin/bash. While bash is supposed to be sh-compatible when invoked as sh, it # just isn't. This section details some of the things you have to stay away # from to remain sh-compatible. # # * File pattern expansion does not work for {} # * [ "$x" = "$y" ] has to be [ x"$x" x"$y" ] # * &> for stderr redirection doesn't work, use 2>&1 instead # # BSD SED NOTES # # BSD SED is not very nice compared to GNU sed, but it is the most # commonly-invoked sed on Macs (being based on BSD), so we have to cater to # it or require people to install GNU sed. It seems like the GNU # requirement isn't too bad since this makefile is really a GNU makefile, # but apparently GNU sed is much less common than GNU make in general, so # I'm supporting it here. # # Sad experience has taught me the following about BSD sed: # # * \+ is not understood to mean \{1,\} # * \| is meaningless (does not branch) # * \n cannot be used as a substitution character # * ? does not mean \{0,1\}, but is literal # * a\ works, but only reliably for a single line if subsequent lines # have forward slashes in them (as is the case in postscript) # # For more info (on the Mac) you can consult # # man -M /usr/share/man re_format # # And look for the word "Obsolete" near the bottom. # # EXTERNAL PROGRAM DOCUMENTATION SCRIPT # # $(call output-all-programs,[<output file>]) define output-all-programs [ -f '$(this_file)' ] && \ $(SED) \ -e '/^[[:space:]]*#[[:space:]]*EXTERNAL PROGRAMS:/,/^$$/!d' \ -e '/EXTERNAL PROGRAMS/d' \ -e '/^$$/d' \ -e '/^[[:space:]]*#/i\ '\ -e 's/^[[:space:]]*#[[:space:]][^=]*//' \ $(this_file) $(if $1,> '$1',) || \ $(ECHO) "Cannot determine the name of this makefile." endef # If they misspell gray, it should still work. GRAY ?= $(call get-default,$(GREY),) # # Utility Functions and Definitions # # While not exactly a make function, this vim macro is useful. It takes a # verbatim sed script and converts each line to something suitable in a command # context. Just paste the script's contents into the editor, yank this into a # register (starting at '0') and run the macro once for each line of the # original script: # # 0i -e :s/\$/$$/eg :s/'/'"'"'/eg ^Ela'A' \:noh j # don't call this directly - it is here to avoid calling wildcard more than # once in remove-files. remove-files-helper = $(if $1,$(RM) $1,$(sh_true)) # $(call remove-files,file1 file2) remove-files = $(call remove-files-helper,$(wildcard $1)) # Removes all cleanable files in the given list # $(call clean-files,file1 file2 file3 ...) # Works exactly like remove-files, but filters out files in $(neverclean) clean-files = \ $(call remove-files-helper,$(call cleanable-files,$(wildcard $1))) # Outputs all generated files to STDOUT, along with some others that are # created by these (e.g., .idx files end up producing .ilg and .ind files). # Discovered by reading *.fls OUTPUT lines and producing corresponding .ind # filenames as needed. # # $(call get-generated-names,<source recorder file (*.fls)>) define get-generated-names [ -f '$1' ] && \ $(SED) \ -e '/^OUTPUT /{' \ -e ' s///' \ -e ' p' \ -e ' s/\.idx/\.ind/p' \ -e ' s/\.ind/\.ilg/p' \ -e '}' \ -e 'd' \ '$1' \ | $(SORT) | $(UNIQ) endef # This removes files without checking whether they are there or not. This # sometimes has to be used when the file is created by a series of shell # commands, but there ends up being a race condition: make doesn't know about # the file generation as quickly as the system does, so $(wildcard ...) doesn't # work right. Blech. # $(call remove-temporary-files,filenames) remove-temporary-files = $(if $1,$(RM) $1,:) # Create an identifier from a file name # $(call cleanse-filename,filename) cleanse-filename = $(subst .,_,$(subst /,__,$1)) # Escape dots # $(call escape-dots,str) escape-dots = $(subst .,\\.,$1) # Test that a file exists # $(call test-exists,file) test-exists = [ -e '$1' ] # $(call move-files,source,destination) move-if-exists = $(call test-exists,$1) && $(MV) '$1' '$2' # Copy file1 to file2 only if file2 doesn't exist or they are different # $(call copy-if-different,sfile,dfile) copy-if-different = $(call test-different,$1,$2) && $(CP) '$1' '$2' copy-if-exists = $(call test-exists,$1) && $(CP) '$1' '$2' move-if-different = $(call test-different,$1,$2) && $(MV) '$1' '$2' replace-if-different-and-remove = \ $(call test-different,$1,$2) \ && $(MV) '$1' '$2' \ || $(call remove-files,'$1') # Note that $(DIFF) returns success when the files are the SAME.... # $(call test-different,sfile,dfile) test-different = ! $(DIFF) -q '$1' '$2' >/dev/null 2>&1 test-exists-and-different = \ $(call test-exists,$2) && $(call test-different,$1,$2) # Return value 1, or value 2 if value 1 is empty # $(call get-default,<possibly empty arg>,<default value if empty>) get-default = $(if $1,$1,$2) # Copy a file and log what's going on # $(call copy-with-logging,<source>,<target>) define copy-with-logging if [ -d '$2/' ]; then \ if $(CP) '$1' '$2/'; then \ $(ECHO) "$(C_INFO)Copied '$1' to '$2/'$(C_RESET)"; \ else \ $(ECHO) "$(C_ERROR)Failed to copy '$1' to '$2/'$(C_RESET)"; \ fi; \ fi endef # Gives a reassuring message about the failure to find include files # $(call include-message,<list of include files>) define include-message $(strip \ $(if $(filter-out $(wildcard $1),$1),\ $(shell $(ECHO) \ "$(C_INFO)NOTE: You may ignore warnings about the"\ "following files:" >&2;\ $(ECHO) >&2; \ $(foreach s,$(filter-out $(wildcard $1),$1),$(ECHO) ' $s' >&2;)\ $(ECHO) "$(C_RESET)" >&2) )) endef # Characters that are hard to specify in certain places space := $(empty) $(empty) colon := \: comma := , # Useful shell definitions sh_true := : sh_false := ! : # Clear out the standard interfering make suffixes .SUFFIXES: # Turn off forceful rm (RM is usually mapped to rm -f) ifdef SAFE_RM RM := rm endif # Turn command echoing back on with VERBOSE=1 ifndef VERBOSE QUIET := @ endif # Turn on shell debugging with SHELL_DEBUG=1 # (EVERYTHING is echoed, even $(shell ...) invocations) ifdef SHELL_DEBUG SHELL += -x endif # Get the name of this makefile (always right in 3.80, often right in 3.79) # This is only really used for documentation, so it isn't too serious. ifdef MAKEFILE_LIST this_file := $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST)) else this_file := $(wildcard GNUmakefile makefile Makefile) endif # Terminal color definitions REAL_TPUT := $(if $(NO_COLOR),,$(shell $(WHICH) $(TPUT))) # $(call get-term-code,codeinfo) # e.g., # $(call get-term-code,setaf 0) get-term-code = $(if $(REAL_TPUT),$(shell $(REAL_TPUT) $1),) black := $(call get-term-code,setaf 0) red := $(call get-term-code,setaf 1) green := $(call get-term-code,setaf 2) yellow := $(call get-term-code,setaf 3) blue := $(call get-term-code,setaf 4) magenta := $(call get-term-code,setaf 5) cyan := $(call get-term-code,setaf 6) white := $(call get-term-code,setaf 7) bold := $(call get-term-code,bold) uline := $(call get-term-code,smul) reset := $(call get-term-code,sgr0) # # User-settable definitions # LATEX_COLOR_WARNING ?= magenta LATEX_COLOR_ERROR ?= red LATEX_COLOR_INFO ?= green LATEX_COLOR_UNDERFULL ?= magenta LATEX_COLOR_OVERFULL ?= red bold LATEX_COLOR_PAGES ?= bold LATEX_COLOR_BUILD ?= cyan LATEX_COLOR_GRAPHIC ?= yellow LATEX_COLOR_DEP ?= green LATEX_COLOR_SUCCESS ?= green bold LATEX_COLOR_FAILURE ?= red bold # Gets the real color from a simple textual definition like those above # $(call get-color,ALL_CAPS_COLOR_NAME) # e.g., $(call get-color,WARNING) get-color = $(subst $(space),,$(foreach c,$(LATEX_COLOR_$1),$($c))) # # STANDARD COLORS # C_WARNING := $(call get-color,WARNING) C_ERROR := $(call get-color,ERROR) C_INFO := $(call get-color,INFO) C_UNDERFULL := $(call get-color,UNDERFULL) C_OVERFULL := $(call get-color,OVERFULL) C_PAGES := $(call get-color,PAGES) C_BUILD := $(call get-color,BUILD) C_GRAPHIC := $(call get-color,GRAPHIC) C_DEP := $(call get-color,DEP) C_SUCCESS := $(call get-color,SUCCESS) C_FAILURE := $(call get-color,FAILURE) C_RESET := $(reset) # # PRE-BUILD TESTS # # Check that clean targets are not combined with other targets (weird things # happen, and it's not easy to fix them) hascleangoals := $(if $(sort $(filter clean clean-%,$(MAKECMDGOALS))),1) hasbuildgoals := $(if $(sort $(filter-out clean clean-%,$(MAKECMDGOALS))),1) ifneq "$(hasbuildgoals)" "" ifneq "$(hascleangoals)" "" $(error $(C_ERROR)Clean and build targets specified together$(C_RESET))) endif endif # # VARIABLE DECLARATIONS # # Names of sed scripts that morph gnuplot files -- only the first found is used GNUPLOT_SED := global-gpi.sed gnuplot.sed GNUPLOT_GLOBAL := global._include_.gpi gnuplot.global ifneq "$(strip $(BUILD_STRATEGY))" "pdflatex" default_graphic_extension ?= eps latex_build_program ?= $(LATEX) build_target_extension ?= dvi hyperref_driver_pattern ?= hdvips hyperref_driver_error ?= Using dvips: specify ps2pdf in the hyperref options. else default_graphic_extension ?= pdf latex_build_program ?= $(PDFLATEX) build_target_extension ?= pdf hyperref_driver_pattern ?= hpdf.* hyperref_driver_error ?= Using pdflatex: specify pdftex in the hyperref options (or leave it blank). endif # Files of interest all_files.tex ?= $(wildcard *.tex) all_files.tex.sh ?= $(wildcard *.tex.sh) all_files.tex.pl ?= $(wildcard *.tex.pl) all_files.tex.py ?= $(wildcard *.tex.py) all_files.rst ?= $(wildcard *.rst) all_files.fig ?= $(wildcard *.fig) all_files.gpi ?= $(wildcard *.gpi) all_files.dot ?= $(wildcard *.dot) all_files.xvg ?= $(wildcard *.xvg) all_files.svg ?= $(wildcard *.svg) all_files.png ?= $(wildcard *.png) all_files.jpg ?= $(wildcard *.jpg) all_files.eps.gz ?= $(wildcard *.eps.gz) all_files.eps ?= $(wildcard *.eps) # Utility function for obtaining all files not specified in $(neverclean) # $(call cleanable-files,file1 file2 file3 ...) # Returns the list of files that is not in $(wildcard $(neverclean)) cleanable-files = $(filter-out $(wildcard $(neverclean)), $1) # Utility function for getting all .$1 files that are to be ignored # * files listed in $(includes.$1) # * files not listed in $(onlysources.$1) if it is defined ignore_files = \ $(includes.$1) \ $(if $(onlysources.$1),$(filter-out $(onlysources.$1), $(all_files.$1))) # Patterns to never be allowed as source targets ignore_patterns := %._include_ # Patterns allowed as source targets but not included in 'all' builds nodefault_patterns := %._nobuild_ $(ignore_patterns) # Utility function for getting targets suitable building # $(call filter-buildable,suffix) filter-buildable = \ $(filter-out $(call ignore_files,$1) \ $(addsuffix .$1,$(ignore_patterns)),$(all_files.$1)) # Utility function for getting targets suitable for 'all' builds # $(call filter-default,suffix) filter-default = \ $(filter-out $(call ignore_files,$1) \ $(addsuffix .$1,$(nodefault_patterns)),$(all_files.$1)) # Top level sources that can be built even when they are not by default files.tex := $(call filter-buildable,tex) files.tex.sh := $(call filter-buildable,tex.sh) files.tex.pl := $(call filter-buildable,tex.pl) files.tex.py := $(call filter-buildable,tex.py) files.rst := $(call filter-buildable,rst) files.gpi := $(call filter-buildable,gpi) files.dot := $(call filter-buildable,dot) files.fig := $(call filter-buildable,fig) files.xvg := $(call filter-buildable,xvg) files.svg := $(call filter-buildable,svg) files.png := $(call filter-buildable,png) files.jpg := $(call filter-buildable,jpg) files.eps.gz := $(call filter-buildable,eps.gz) # Make all pstex targets secondary. The pstex_t target requires the pstex # target, and nothing else really depends on it, so it often gets deleted. # This avoids that by allowing *all* fig files to be pstex targets, which is # perfectly valid and causes no problems even if they're going to become eps # files in the end. .SECONDARY: $(patsubst %.fig,%.pstex,$(files.fig)) # Top level sources that are built by default targets default_files.tex := $(call filter-default,tex) default_files.tex.sh := $(call filter-default,tex.sh) default_files.tex.pl := $(call filter-default,tex.pl) default_files.tex.py := $(call filter-default,tex.py) default_files.rst := $(call filter-default,rst) default_files.gpi := $(call filter-default,gpi) default_files.dot := $(call filter-default,dot) default_files.fig := $(call filter-default,fig) default_files.xvg := $(call filter-default,xvg) default_files.svg := $(call filter-default,svg) default_files.png := $(call filter-default,png) default_files.jpg := $(call filter-default,jpg) default_files.eps.gz := $(call filter-default,eps.gz) # Utility function for creating larger lists of files # $(call concat-files,suffixes,[prefix]) concat-files = $(foreach s,$1,$($(if $2,$2_,)files.$s)) # Useful file groupings all_files_source := $(call concat-files,tex,all) all_files_scripts := $(call concat-files,tex.sh tex.pl tex.py rst,all) .PHONY: $(all_files_scripts) default_files_source := $(call concat-files,tex,default) default_files_scripts := $(call concat-files,tex.sh tex.pl tex.py rst,default) files_source := $(call concat-files,tex) files_scripts := $(call concat-files,tex.sh tex.pl tex.py rst) # Utility function for obtaining stems # $(call get-stems,suffix,[prefix]) get-stems = $(sort $($(if $2,$2_,)files.$1:%.$1=%)) # List of all stems (including ._include_ and ._nobuild_ file stems) all_stems.tex := $(call get-stems,tex,all) all_stems.tex.sh := $(call get-stems,tex.sh,all) all_stems.tex.pl := $(call get-stems,tex.pl,all) all_stems.tex.py := $(call get-stems,tex.py,all) all_stems.rst := $(call get-stems,rst,all) all_stems.fig := $(call get-stems,fig,all) all_stems.gpi := $(call get-stems,gpi,all) all_stems.dot := $(call get-stems,dot,all) all_stems.xvg := $(call get-stems,xvg,all) all_stems.svg := $(call get-stems,svg,all) all_stems.png := $(call get-stems,png,all) all_stems.jpg := $(call get-stems,jpg,all) all_stems.eps.gz := $(call get-stems,eps.gz,all) all_stems.eps := $(call get-stems,eps,all) # List of all default stems (all default PDF targets): default_stems.tex := $(call get-stems,tex,default) default_stems.tex.sh := $(call get-stems,tex.sh,default) default_stems.tex.pl := $(call get-stems,tex.pl,default) default_stems.tex.py := $(call get-stems,tex.py,default) default_stems.rst := $(call get-stems,rst,default) default_stems.fig := $(call get-stems,fig,default) default_stems.gpi := $(call get-stems,gpi,default) default_stems.dot := $(call get-stems,dot,default) default_stems.xvg := $(call get-stems,xvg,default) default_stems.svg := $(call get-stems,svg,default) default_stems.png := $(call get-stems,png,default) default_stems.jpg := $(call get-stems,jpg,default) default_stems.eps.gz := $(call get-stems,eps.gz,default) # List of all stems (all possible bare PDF targets created here): stems.tex := $(call get-stems,tex) stems.tex.sh := $(call get-stems,tex.sh) stems.tex.pl := $(call get-stems,tex.pl) stems.tex.py := $(call get-stems,tex.py) stems.rst := $(call get-stems,rst) stems.fig := $(call get-stems,fig) stems.gpi := $(call get-stems,gpi) stems.dot := $(call get-stems,dot) stems.xvg := $(call get-stems,xvg) stems.svg := $(call get-stems,svg) stems.png := $(call get-stems,png) stems.jpg := $(call get-stems,jpg) stems.eps.gz := $(call get-stems,eps.gz) # Utility function for creating larger lists of stems # $(call concat-stems,suffixes,[prefix]) concat-stems = $(sort $(foreach s,$1,$($(if $2,$2_,)stems.$s))) # The most likely to be source but not finished product go first graphic_source_extensions := fig \ gpi \ xvg \ svg \ dot \ eps.gz ifneq "$(strip $(BUILD_STRATEGY))" "pdflatex" graphic_source_extensions += png jpg graphic_target_extensions := eps ps else graphic_source_extensions += eps graphic_target_extensions := pdf png jpg mps tif endif all_stems_source := $(call concat-stems,tex,all) all_stems_script := $(call concat-stems,tex.sh tex.pl tex.py rst,all) all_stems_graphic := $(call concat-stems,$(graphic_source_extensions),all) all_stems_ss := $(sort $(all_stems_source) $(all_stems_script)) all_stems_sg := $(sort $(all_stems_script)) all_stems_ssg := $(sort $(all_stems_ss)) default_stems_source := $(call concat-stems,tex,default) default_stems_script := $(call concat-stems,tex.sh tex.pl tex.py rst,default) default_stems_ss := $(sort $(default_stems_source) $(default_stems_script)) default_stems_sg := $(sort $(default_stems_script)) default_stems_ssg := $(sort $(default_stems_ss)) stems_source := $(call concat-stems,tex) stems_script := $(call concat-stems,tex.sh tex.pl tex.py rst) stems_graphic := $(call concat-stems,$(graphic_source_extensions)) stems_gg := $(sort $(stems_graphic)) stems_ss := $(sort $(stems_source) $(stems_script)) stems_sg := $(sort $(stems_script)) stems_ssg := $(sort $(stems_ss)) # Calculate names that can generate the need for an include file. We can't # really do this with patterns because it's too easy to screw up, so we create # an exhaustive list. allowed_source_suffixes := \ pdf \ ps \ dvi \ ind \ nls \ bbl \ aux \ aux.make \ d \ auxbbl.make \ _graphics \ _show allowed_source_patterns := $(addprefix %.,$(allowed_source_suffixes)) allowed_graphic_suffixes := \ pdf \ eps \ gpihead.make \ gpi.d allowed_graphic_patterns := $(addprefix %.,$(allowed_graphic_suffixes)) # All targets allowed to build documents allowed_source_targets := \ $(foreach suff,$(allowed_source_suffixes),\ $(addsuffix .$(suff),$(stems_ssg))) # All targets allowed to build graphics allowed_graphic_targets := \ $(foreach suff,$(allowed_graphic_suffixes),\ $(addsuffix .$(suff),$(stems_gg))) # All targets that build multiple documents (like 'all') allowed_batch_source_targets := \ all \ all-pdf \ all-ps \ all-dvi \ all-bbl \ all-ind \ all-gls \ all-nls \ show # All targets that build multiple graphics (independent of document) allowed_batch_graphic_targets := \ all-graphics \ all-pstex \ all-dot2tex \ show-graphics # Now we figure out which stuff is available as a make target for THIS RUN. real_goals := $(call get-default,$(filter-out _includes,$(MAKECMDGOALS)),\ all) specified_source_targets := $(strip \ $(filter $(allowed_source_targets) $(stems_ssg),$(real_goals)) \ ) specified_batch_source_targets := $(strip \ $(filter $(allowed_batch_source_targets),$(real_goals)) \ ) specified_graphic_targets := $(strip \ $(filter $(allowed_graphic_targets),$(real_goals)) \ ) specified_batch_graphic_targets := $(strip \ $(filter $(allowed_batch_graphic_targets),$(real_goals)) \ ) specified_gpi_targets := $(patsubst %.gpi,%.$(default_graphic_extension),\ $(filter $(patsubst %.$(default_graphic_extension),%.gpi,$(specified_graphic_targets)),\ $(all_files.gpi)) \ ) # Determine which .d files need including from the information gained above. # This is done by first checking whether a batch target exists. If it does, # then all *default* stems are used to create possible includes (nobuild need # not apply for batch status). If no batch targets exist, then the individual # targets are considered and appropriate includes are taken from them. source_stems_to_include := \ $(sort\ $(if $(specified_batch_source_targets),\ $(default_stems_ss),\ $(foreach t,$(specified_source_targets),\ $(foreach p,$(allowed_source_patterns),\ $(patsubst $p,%,$(filter $p $(stems_ssg),$t)) \ )) \ )) # Determine which .gpi.d files are needed using the above information. We # first check whether a batch target is specified, then check individual # graphics that may have been specified. graphic_stems_to_include := \ $(sort\ $(if $(specified_batch_graphic_targets),\ $(default_stems.gpi),\ $(foreach t,$(specified_gpi_targets),\ $(foreach p,$(allowed_graphic_patterns),\ $(patsubst $p,%,$(filter $p,$t)) \ )) \ )) # All dependencies for the 'all' targets all_pdf_targets := $(addsuffix .pdf,$(stems_ssg)) all_ps_targets := $(addsuffix .ps,$(stems_ssg)) all_dvi_targets := $(addsuffix .dvi,$(stems_ssg)) all_tex_targets := $(addsuffix .tex,$(stems_sg)) all_d_targets := $(addsuffix .d,$(stems_ssg)) all_graphics_targets := $(addsuffix .$(default_graphic_extension),$(stems_gg)) intermediate_graphics_targets := $(if $(filter pdf,$(default_graphic_extension)),$(addsuffix .eps,$(stems_gg)),) all_pstex_targets := $(addsuffix .pstex_t,$(stems.fig)) all_dot2tex_targets := $(addsuffix .dot_t,$(stems.dot)) all_known_graphics := $(sort $(all_graphics_targets) $(wildcard *.$(default_graphic_extension))) default_pdf_targets := $(addsuffix .pdf,$(default_stems_ss)) ifneq "$(strip $(BUILD_STRATEGY))" "pdflatex" default_ps_targets := $(addsuffix .ps,$(default_stems_ss)) default_dvi_targets := $(addsuffix .dvi,$(default_stems_ss)) pre_pdf_extensions := dvi ps endif # Extensions generated by LaTeX invocation that can be removed when complete rm_ext := \ log *.log aux $(pre_pdf_extensions) pdf blg bbl out nav snm toc lof lot lol pfg \ fls vrb idx ind ilg glg glo gls lox nls nlo nlg brf mtc maf brf backup_patterns := *~ *.bak *.backup body.tmp head.tmp graph_stem := _graph # All LaTeX-generated files that can be safely removed rm_tex := \ $(foreach e,$(rm_ext),$(addsuffix .$e,$(all_stems_source))) \ $(foreach e,$(rm_ext) tex,$(addsuffix .$e,$(all_stems_sg))) \ $(addsuffix .log,$(all_ps_targets) $(all_pdf_targets)) \ $(addsuffix .*.log,$(stems_graphic)) # These are the files that will affect .gpi transformation for all .gpi files. # # Use only the first one found. Backward compatible values are at the end. # Note that we use foreach, even though wildcard also returns a list, to ensure # that the order in the uppercase variables is preserved. Directory listings # provide no such guarantee, so we avoid relying on them. gpi_sed := $(strip \ $(firstword $(foreach f,$(GNUPLOT_SED),$(wildcard $f)))) gpi_global := $(strip \ $(firstword $(foreach f,$(GNUPLOT_GLOBAL),$(wildcard $f)))) # # Functions used in generating output # # Outputs all source dependencies to stdout. The first argument is the file to # be parsed, the second is a list of files that will show up as dependencies in # the new .d file created here. # # NOTE: BSD sed does not understand \|, so we have to do something more # clunky to extract suitable extensions. # # Also, we do a little bit of funny rewriting up front (TARGETS=) to make sure # that we can properly backslash-escape spaces in file names (e.g, on Cygwin # for tex distributions that have "Program Files" in their name). # # $(call get-inputs,<parsed file>,<target files>) define get-inputs $(SED) \ -e '/^INPUT/!d' \ -e 's!^INPUT \(\./\)\{0,1\}!!' \ -e 's/[[:space:]]/\\ /g' \ -e 's/\(.*\)\.aux$$/\1.tex/' \ -e '/\.tex$$/b addtargets' \ -e '/\.cls$$/b addtargets' \ -e '/\.sty$$/b addtargets' \ -e '/\.pstex_t$$/b addtargets' \ -e '/\.dot_t$$/b addtargets' \ -e 'd' \ -e ':addtargets' \ -e 's/^/$2: /' \ $1 | $(SORT) | $(UNIQ) endef # $(call get-missing-inputs,<log file>,<target files>) define get-missing-inputs $(SED) \ -e '$$ b para' \ -e '/^$$/b para' \ -e 'H' \ -e 'd' \ -e ':para' \ -e 'x' \ -e '/^$$/d' \ -e 's/^\n*//' \ -e '/^! LaTeX Error: File /{' \ -e ' s/^/::DOUBLE_PARAGRAPH::/' \ -e ' h' \ -e ' d' \ -e '}' \ -e 's/^::DOUBLE_PARAGRAPH:://' \ -e '/Default extension: /!d' \ -e 's/[[:space:]]\{1,\}/ /g' \ -e 's/\n\{1,\}/ /g' \ -e 's/^.*File `//' \ -e 's/'"'"' not found\..*//' \ -e '/\.tex/!s/$$/.tex/' \ -e 's/[[:space:]]/\\ /g' \ -e 'h' \ -e 's/.*/# MISSING input "&" - (presence of comment affects build)/' \ -e 'p' \ -e 's/.*//' \ -e 'x' \ -e 's/^/$2: /' \ $1 | $(SORT) | $(UNIQ) endef # Get source file for specified graphics stem. # # $(call graphics-source,<stem>) define graphics-source $(strip $(firstword \ $(wildcard \ $(addprefix $1.,\ $(graphic_source_extensions))) \ $1 \ )) endef # Get the target file for the specified graphics file/stem # # $(call graphics-target,<stem>) define graphics-target $(strip $(if $(filter $(addprefix %.,$(graphic_target_extensions)),$1), $1, $(firstword $(patsubst $(addprefix %.,$(graphic_source_extensions) $(graphic_target_extensions)), %, $1).$(default_graphic_extension) $1.$(default_graphic_extension)))) endef # Outputs all of the graphical dependencies to stdout. The first argument is # the stem of the source file being built, the second is a list of suffixes # that will show up as dependencies in the generated .d file. # # Note that we try to escape spaces in filenames where possible. We have to do # it with three backslashes so that as the name percolates through the makefile # it eventually ends up with the proper escaping when the build rule is found. # Ugly, but it appears to work. Note that graphicx doesn't allow filenames # with spaces, so this could in many ways be moot unless you're using something # like grffile. # # For pdflatex, we really need the missing file to be specified without an # extension, otherwise compilation barfs on the first missing file. Truly # annoying, but there you have it. # # It turns out that the graphics errors, although they have lines with empty # space, are only made of two paragraphs. So, we just use some sed magic to # get everything into paragraphs, detect when it's a paragraph that interests # us, and double it up. Then we get the filename only if we're missing # extensions (a sign that it's graphicx complaining). # # $(call get-graphics,<target file stem>) #.log,$(addprefix $*.,d $(build_target_extension) _graphics) define get-graphics $(SED) \ -e '$$ b para' \ -e '/^$$/b para' \ -e 'H' \ -e 'd' \ -e ':para' \ -e 'x' \ -e '/^$$/d' \ -e 's/^\n*//' \ -e '/^! LaTeX Error: File `/{' \ -e ' s/^/::DOUBLE_PARAGRAPH::/' \ -e ' h' \ -e ' d' \ -e '}' \ -e 's/^::DOUBLE_PARAGRAPH:://' \ -e '/could not locate the file with any of these extensions:/{' \ -e ' s/\n\{1,\}/ /g' \ -e ' s/[[:space:]]\{1,\}/ /g' \ -e ' s/^.*File `//' \ -e ' s/'"'"' not found\..*//' \ -e ' h' \ -e ' s/.*/# MISSING stem "&" - (presence of comment affects build)/' \ -e ' p' \ -e ' g' \ -e ' b addtargets' \ -e '}' \ -e '/.*File: \(.*\) Graphic file (type [^)]*).*/{' \ -e ' s//\1/' \ -e ' b addtargets' \ -e '}' \ -e 'd' \ -e ':addtargets' \ -e 's/[[:space:]]/\\\\\\&/g' \ -e 'h' \ -e 's/.*/-include &.gpi.d/' \ -e 'p' \ -e 'g' \ -e 's/.*/$(addprefix $1,.d): $$$$(call graphics-source,&)/' \ -e 'p' \ -e 's/.*//' \ -e 'x' \ -e 's/.*/$(addprefix $1.,$(build_target_extension) _graphics): $$$$(call graphics-target,&)/' \ -e 'p' \ -e 'd' \ $*.log endef # Checks for build failure due to pstex inclusion, and gives instructions. # # $(call die-on-pstexs,<parsed file>) define die-on-pstexs if $(EGREP) -q '^! LaTeX Error: File .*\.pstex.* not found' $1; then \ $(ECHO) "$(C_ERROR)Missing pstex_t file(s)$(C_RESET)"; \ $(ECHO) "$(C_ERROR)Please run$(C_RESET)"; \ $(ECHO) "$(C_ERROR) make all-pstex$(C_RESET)"; \ $(ECHO) "$(C_ERROR)before proceeding.$(C_RESET)"; \ exit 1; \ fi endef # Checks for build failure due to dot2tex, and gives instructions. # # $(call die-on-dot2tex,<parsed file>) define die-on-dot2tex if $(EGREP) -q ' LaTeX Error: File .*\.dot_t.* not found' $1; then \ $(ECHO) "$(C_ERROR)Missing dot_t file(s)$(C_RESET)"; \ $(ECHO) "$(C_ERROR)Please run$(C_RESET)"; \ $(ECHO) "$(C_ERROR) make all-dot2tex$(C_RESET)"; \ $(ECHO) "$(C_ERROR)before proceeding.$(C_RESET)"; \ exit 1; \ fi endef # Checks for the existence of a .aux file, and dies with an error message if it # isn't there. Note that we pass the file stem in, not the full filename, # e.g., to check for foo.aux, we call it thus: $(call die-on-no-aux,foo) # # $(call die-on-no-aux,<aux stem>) define die-on-no-aux if [ ! -e '$1.aux' ]; then \ $(call colorize-latex-errors,$1.log); \ exit 1; \ fi endef # Outputs all index files to stdout. Arg 1 is the source file stem, arg 2 is # the list of targets for the discovered dependency. # # $(call get-log-index,<log file stem>,<target files>) define get-log-index $(SED) \ -e 's/^No file \(.*\.ind\)\.$$/TARGETS=\1/' \ -e 's/^No file \(.*\.[gn]ls\)\.$$/TARGETS=\1/' \ -e 's/[[:space:]]/\\&/g' \ -e '/^TARGETS=/{' \ -e ' h' \ -e ' s/^TARGETS=/$2: /p' \ -e ' g' \ -e ' s/^TARGETS=\(.*\)/\1: $1.tex/p' \ -e '}' \ -e 'd' \ '$1.log' | $(SORT) | $(UNIQ) endef # Outputs all bibliography files to stdout. Arg 1 is the source stem, arg 2 is # a list of targets for each dependency found. # # The script kills all lines that do not contain bibdata. Remaining lines have # the \bibdata macro and delimiters removed to create a dependency list. A # trailing comma is added, then all adjacent commas are collapsed into a single # comma. Then commas are replaced with the string .bib[space], and the # trailing space is killed off. Finally, all filename spaces are escaped. # This produces a list of space-delimited .bib filenames, which is what the # make dep file expects to see. # # Note that we give kpsewhich a bogus argument so that a failure of sed to # produce output will not cause an error. # # $(call get-bibs,<aux file>,<targets>) define get-bibs $(SED) \ -e '/^\\bibdata/!d' \ -e 's/\\bibdata{\([^}]*\)}/\1,/' \ -e 's/,\{2,\}/,/g' \ -e 's/[[:space:]]/\\&/g' \ -e 's/,/.bib /g' \ -e 's/ \{1,\}$$//' \ $1 | $(XARGS) $(KPSEWHICH) '#######' | \ $(SED) \ -e 's/^/$2: /' | \ \$(SORT) | $(UNIQ) endef # Makes a an aux file that only has stuff relevant to the target in it # $(call make-auxtarget-file,<flattened-aux>,<new-aux>) define make-auxtarget-file $(SED) \ -e '/^\\newlabel/!d' \ $1 > $2 endef # Makes an aux file that only has stuff relevant to the bbl in it # $(call make-auxbbl-file,<flattened-aux>,<new-aux>) define make-auxbbl-file $(SED) \ -e '/^\\newlabel/d' \ $1 > $2 endef # Makes a .gpi.d file from a .gpi file # $(call make-gpi-d,<.gpi>,<.gpi.d>) define make-gpi-d $(ECHO) '# vim: ft=make' > $2; \ $(ECHO) 'ifndef INCLUDED_$(call cleanse-filename,$2)' >> $2; \ $(ECHO) 'INCLUDED_$(call cleanse-filename,$2) := 1' >> $2; \ $(call get-gpi-deps,$1,$(addprefix $(2:%.gpi.d=%).,$(GNUPLOT_OUTPUT_EXTENSION) gpi.d)) >> $2; \ $(ECHO) 'endif' >> $2; endef # Parse .gpi files for data and loaded dependencies, output to stdout # # The sed script here tries to be clever about obtaining valid # filenames from the gpi file. It assumes that the plot command starts its own # line, which is not too difficult a constraint to satisfy. # # This command script also generates 'include' directives for every 'load' # command in the .gpi file. The load command must appear on a line by itself # and the file it loads must have the suffix .gpi. If you don't want it to be # compiled when running make graphics, then give it a suffix of ._include_.gpi. # # $(call get-gpi-deps,<gpi file>,<targets>) define get-gpi-deps $(SED) \ -e '/^[[:space:]]*s\{0,1\}plot/,/[^\\]$$/{' \ -e ' H' \ -e ' /[^\\]$$/{' \ -e ' s/.*//' \ -e ' x' \ -e ' s/\\\{0,1\}\n//g' \ -e ' s/^[[:space:]]*s\{0,1\}plot[[:space:]]*\(\[[^]]*\][[:space:]]*\)*/,/' \ -e ' s/[[:space:]]*\(['\''"][^'\''"]*['\''"]\)\{0,1\}[^,]*/\1/g' \ -e ' s/,['\''"]-\{0,1\}['\''"]//g' \ -e ' s/[,'\''"]\{1,\}/ /g' \ -e ' s!.*!$2: &!' \ -e ' p' \ -e ' }' \ -e ' d' \ -e '}' \ -e 's/^[[:space:]]*load[[:space:]]*['\''"]\([^'\''"]*\.gpi\)['\''"].*$$/-include \1.d/p' \ -e 'd' \ $1 endef # Colorizes real, honest-to-goodness LaTeX errors that can't be overcome with # recompilation. # # Note that we only ignore file not found errors for things that we know how to # build, like graphics files. # # $(call colorize-latex-errors,<log file>) define colorize-latex-errors $(SED) \ -e '$$ b para' \ -e '/^$$/b para' \ -e 'H' \ -e 'd' \ -e ':para' \ -e 'x' \ -e '/^$$/d' \ -e 's/^\n*//' \ -e '/^! LaTeX Error: File /{' \ -e ' s/^/::DOUBLE_PARAGRAPH::/' \ -e ' h' \ -e ' d' \ -e '}' \ -e 's/^::DOUBLE_PARAGRAPH:://' \ -e '/could not locate the file with any of these extensions:/d' \ -e '/Missing .begin.document/{' \ -e ' h' \ -e ' s/.*/Are you trying to build an include file?/' \ -e ' x' \ -e ' G' \ -e '}' \ -e '/ LaTeX Error: Cannot determine size/d' \ -e 's/.* LaTeX Error .*/$(C_ERROR)&$(C_RESET)/p' \ -e 's/Error: pdflatex (file .*/$(C_ERROR)& - try specifying it without an extension$(C_RESET)/p' \ -e '/.*\*hyperref using.*driver \(.*\)\*.*/{' \ -e ' s//\1/' \ -e ' /^$(hyperref_driver_pattern)$$/!{' \ -e ' s/.*//' \ -e ' p' \ -e ' s/.*/$(C_ERROR)--- Using incorrect driver for hyperref! ---$(C_RESET)/' \ -e ' p' \ -e ' s/.*/$(C_ERROR)$(hyperref_driver_error)$(C_RESET)/' \ -e ' p' \ -e ' }' \ -e ' d' \ -e '}' \ -e '/ LaTeX Error: Unknown graphics extension/{' \ -e ' s/^/ /' \ -e ' h' \ -e ' s/.*/--- Graphics extension error:/' \ -e ' G' \ -e ' h' \ -e ' s/.*/--- If you specified the extension explicitly in your .tex file, try removing it./' \ -e ' H' \ -e ' g' \ -e ' s/.*/$(C_ERROR)&$(C_RESET)/' \ -e ' p' \ -e ' s/.*//' \ -e ' h' \ -e ' b' \ -e '}' \ -e 's/.*\(\n\{0,\}! .*\)/$(C_ERROR)\1$(C_RESET)/p' \ -e 'd' \ $1 endef # Colorize Makeindex errors define colorize-makeindex-errors $(SED) \ -e '/^!! /{' \ -e ' N' \ -e ' s/^.*$$/$(C_ERROR)&$(C_RESET)/' \ -e ' p' \ -e '}' \ -e 'd' \ $1 endef # Colorize epstopdf errors # # $(call colorize-epstopdf-errors,<log file>) define colorize-epstopdf-errors $(SED) \ -e '/^Error:/,/^Execution stack:/{' \ -e ' /^Execution stack:/d' \ -e ' s/.*/$(C_ERROR)&$(C_RESET)/' \ -e ' p' \ -e '}' \ -e 'd' \ $1 endef # Colorize GNUplot errors # # $(call colorize-gnuplot-errors,<log file>) define colorize-gnuplot-errors $(SED) \ -e '/, line [0-9]*:/!{' \ -e ' H' \ -e ' x' \ -e ' s/.*\n\(.*\n.*\)$$/\1/' \ -e ' x' \ -e '}' \ -e '/, line [0-9]*:/{' \ -e ' H' \ -e ' /unknown.*terminal type/{' \ -e ' s/.*/--- Try changing the GNUPLOT_OUTPUT_EXTENSION variable to 'eps'./' \ -e ' H' \ -e ' }' \ -e ' /gpihead/{' \ -e ' s/.*/--- This could be a Makefile bug - contact the maintainer./' \ -e ' H' \ -e ' }' \ -e ' g' \ -e ' s/.*/$(C_ERROR)&$(C_RESET)/' \ -e ' p' \ -e '}' \ -e '/^gnuplot>/,/^$$/{' \ -e ' s/^gnuplot.*/$(C_ERROR)&/' \ -e ' s/^$$/$(C_RESET)/' \ -e ' p' \ -e '}' \ -e 'd' \ $1 endef # Colorize GraphViz errors # # $(call colorize-dot-errors,<log file>) define colorize-dot-errors $(SED) \ -e '/^Error:/,/context:/s/.*/$(C_ERROR)&$(C_RESET)/p' \ -e 's/^Warning:.*/$(C_WARNING)&$(C_RESET)/p' \ -e 'd' \ '$1' endef # Get all important .aux files from the top-level .aux file and merges them all # into a single file, which it outputs to stdout. # # $(call flatten-aux,<toplevel aux>,<output file>) define flatten-aux $(SED) \ -e '/\\@input{\(.*\)}/{' \ -e 's//\1/' \ -e 's![.:]!\\&!g' \ -e 'h' \ -e 's!.*!\\:\\\\@input{&}:{!' \ -e 'p' \ -e 'x' \ -e 's/\\././g' \ -e 's/.*/r &/p' \ -e 's/.*/d/p' \ -e 's/.*/}/p' \ -e 'd' \ -e '}' \ -e 'd' \ '$1' > "$1.$$$$.sed.make"; \ $(SED) -f "$1.$$$$.sed.make" '$1' > "$1.$$$$.make"; \ $(SED) \ -e '/^\\relax/d' \ -e '/^\\bibcite/d' \ -e 's/^\(\\newlabel{[^}]\{1,\}}\).*/\1/' \ "$1.$$$$.make" | $(SORT) > '$2'; \ $(call remove-temporary-files,$1.$$$$.make $1.$$$$.sed.make) endef # Generate pdf from postscript # # Note that we don't just call ps2pdf, since there are so many versions of that # script on various systems. Instead, we call the postscript interpreter # directly. # # $(call ps2pdf,infile,outfile,[embed fonts]) define ps2pdf $(GS) \ -dSAFER -dCompatibilityLevel=$(PS_COMPATIBILITY) \ $(if $3,$(PS_EMBED_OPTIONS)) \ -q -dNOPAUSE -dBATCH \ -sDEVICE=pdfwrite -sstdout=%stderr \ '-sOutputFile=$2' \ -dSAFER -dCompatibilityLevel=$(PS_COMPATIBILITY) \ $(if $3,$(PS_EMBED_OPTIONS)) \ -c .setpdfwrite \ -f '$1' endef # Colorize LaTeX output. # This uses a neat trick from the Sed & Awk Book from O'Reilly: # 1) If a line has a single ending paren, delete it to make a blank line (so # that we catch the first error, which is not always preceded by a blank # line). # 2) Ensure that the last line of the file gets appended to the hold buffer, # and blank it out to trigger end-of-paragraph logic below. # 3) When encountering a blank line (LaTeX output helpfully breaks output on # newlines) # a) swap the hold buffer (containing the paragraph) into the pattern buffer (putting a blank line into the hold buffer), # b) remove the newline at the beginning (don't ask), # c) apply any colorizing substitutions necessary to ensure happiness. # d) get the newline out of the hold buffer and append it # e) profit! (print) # 4) Anything not colorized is deleted, unless in verbose mode. color_tex := \ $(SED) \ -e '$${' \ -e ' /^$$/!{' \ -e ' H' \ -e ' s/.*//' \ -e ' }' \ -e '}' \ -e '/^$$/!{' \ -e ' H' \ -e ' d' \ -e '}' \ -e '/^$$/{' \ -e ' x' \ -e ' s/^\n//' \ -e ' /Output written on /{' \ -e ' s/.*Output written on \([^(]*\) (\([^)]\{1,\}\)).*/Success! Wrote \2 to \1/' \ -e ' s/[[:digit:]]\{1,\}/$(C_PAGES)&$(C_RESET)/g' \ -e ' s/Success!/$(C_SUCCESS)&$(C_RESET)/g' \ -e ' s/to \(.*\)$$/to $(C_SUCCESS)\1$(C_RESET)/' \ -e ' b end' \ -e ' }' \ -e ' / *LaTeX Error:.*/{' \ -e ' s/.*\( *LaTeX Error:.*\)/$(C_ERROR)\1$(C_RESET)/' \ -e ' b end' \ -e ' }' \ -e ' /.*Warning:.*/{' \ -e ' s//$(C_WARNING)&$(C_RESET)/' \ -e ' b end' \ -e ' }' \ -e ' /Underfull.*/{' \ -e ' s/.*\(Underfull.*\)/$(C_UNDERFULL)\1$(C_RESET)/' \ -e ' b end' \ -e ' }' \ -e ' /Overfull.*/{' \ -e ' s/.*\(Overfull.*\)/$(C_OVERFULL)\1$(C_RESET)/' \ -e ' b end' \ -e ' }' \ $(if $(VERBOSE),,-e ' d') \ -e ' :end' \ -e ' G' \ -e '}' \ # Colorize BibTeX output. color_bib := \ $(SED) \ -e 's/^Warning--.*/$(C_WARNING)&$(C_RESET)/' -e 't' \ -e '/---/,/^.[^:]/{' \ -e ' H' \ -e ' /^.[^:]/{' \ -e ' x' \ -e ' s/\n\(.*\)/$(C_ERROR)\1$(C_RESET)/' \ -e ' p' \ -e ' s/.*//' \ -e ' h' \ -e ' d' \ -e ' }' \ -e ' d' \ -e '}' \ -e '/(.*error.*)/s//$(C_ERROR)&$(C_RESET)/' \ $(if $(VERBOSE),,-e 'd') # Make beamer output big enough to print on a full page. Landscape doesn't # seem to work correctly. enlarge_beamer = $(PSNUP) -l -1 -W128mm -H96mm -pletter # $(call test-run-again,<source stem>) test-run-again = $(EGREP) -q '^(.*Rerun .*|No file $1\.[^.]+\.)$$' $1.log # This tests whether the build target commands should be run at all, from # viewing the log file. # $(call test-log-for-need-to-run,<source stem>) define test-log-for-need-to-run $(SED) \ -e '/^No file $(call escape-dots,$1)\.aux\./d' \ $1.log \ | $(EGREP) -q '^(.*Rerun .*|No file $1\.[^.]+\.|No file .+\.tex\.|LaTeX Warning: File.*)$$' endef # LaTeX invocations # # $(call latex,<tex file>,[<extra LaTeX args>]) run-latex = $(latex_build_program) --interaction=batchmode $(if $2,$2,) $1 > /dev/null # $(call latex-color-log,<LaTeX stem>) latex-color-log = $(color_tex) $1.log # $(call run-makeindex,<input>,<output>,<log>,<extra flags>) define run-makeindex success=1; \ if ! $(MAKEINDEX) -q $1 -t $3 -o $2 $4 > /dev/null || $(EGREP) -q '^!!' $3; then \ $(call colorize-makeindex-errors,$3); \ $(RM) -f '$2'; \ success=0; \ fi; \ [ "$$success" = "1" ] && $(sh_true) || $(sh_false); endef # This runs the given script to generate output, and it uses MAKE_RESTARTS to # ensure that it never runs it more than once for a particular root make # invocation. # # $(call run-script,<interpreter>,<input>,<output>) define run-script [ ! -e '$2.cookie' ] && $(ECHO) "restarts=$(RESTARTS)" > $2.cookie && $(ECHO) "level=$(MAKELEVEL)" >> $2.cookie; \ restarts=`$(SED) -n -e 's/^restarts=//p' $2.cookie`; \ level=`$(SED) -n -e 's/^level=//p' $2.cookie`; \ if $(EXPR) $(MAKELEVEL) '<=' $$level '&' $(RESTARTS) '<=' $$restarts >/dev/null; then \ $(call echo-build,$2,$3,$(RESTARTS)-$(MAKELEVEL)); \ $1 '$2' '$3'; \ $(ECHO) "restarts=$(RESTARTS)" > '$2.cookie'; \ $(ECHO) "level=$(MAKELEVEL)" >> '$2.cookie'; \ fi endef # BibTeX invocations # # $(call run-bibtex,<tex stem>) run-bibtex = $(BIBTEX) $1 | $(color_bib) # $(call convert-eps-to-pdf,<eps file>,<pdf file>,[gray]) # Note that we don't use the --filter flag because it has trouble with bounding boxes that way. define convert-eps-to-pdf $(if $3,$(CAT) '$1' | $(call kill-ps-color) > '$1.cookie',$(CP) '$1' '$1.cookie'); \ $(EPSTOPDF) '$1.cookie' --outfile='$2' > $1.log; \ $(call colorize-epstopdf-errors,$1.log); endef # $(call convert-gpi,<gpi file>,<output file>,[gray]) # define convert-gpi $(ECHO) 'set terminal $(if $(filter %.pdf,$2),pdf enhanced,postscript enhanced eps)' \ $(if $(filter %.pdf,$2),fsize ,)$(call get-default,$(strip \ $(firstword \ $(shell \ $(SED) \ -e 's/^\#\#FONTSIZE=\([[:digit:]]\{1,\}\)/\1/p' \ -e 'd' \ $1 $(strip $(gpi_global)) \ ) \ ) \ ),$(if $(filter %.pdf,$2),$(DEFAULT_GPI_PDF_FONTSIZE),$(DEFAULT_GPI_EPS_FONTSIZE))) \ $(strip $(if $3,monochrome,$(if \ $(shell $(EGREP) '^\#\#[[:space:]]*GRAY[[:space:]]*$$' $< $(gpi_global)),\ ,color))) > $1head.make; \ $(ECHO) 'set output "$2"' >> $1head.make; \ $(if $(gpi_global),$(CAT) $(gpi_global) >> $1head.make;,) \ fnames='$1head.make $1';\ $(if $(gpi_sed),\ $(SED) -f '$(gpi_sed)' $$fnames > $1.temp.make; \ fnames=$1.temp.make;,\ ) \ success=1; \ if ! $(GNUPLOT) $$fnames 2>$1.log; then \ $(call colorize-gnuplot-errors,$1.log); \ success=0; \ fi; \ $(if $(gpi_sed),$(call remove-temporary-files,$1.temp.make);,) \ $(call remove-temporary-files,$1head.make); \ [ "$$success" = "1" ] && $(sh_true) || $(sh_false); endef # Creation of .eps files from .png files # # The intermediate step of PNM (using NetPBM) produces much nicer output than # ImageMagick's "convert" binary. I couldn't get the right combination of # flags to make it look nice, anyway. # # To handle gray scale conversion, we pipe things through ppmtopgm in the # middle. # # $(call convert-png,<png file>,<eps file>) define convert-png $(PNGTOPNM) "$1" \ $(if $3,| $(PPMTOPGM),) \ | $(PNMTOPS) -noturn \ > "$2" endef # Creation of .eps files from .jpg files # # Thanks to brubakee for this solution. # # Uses Postscript level 2 to avoid file size bloat # $(call convert-jpg,<jpg file>,<eps file>) define convert-jpg $(CONVERT) $(if $3,-type Grayscale,) '$1' eps2:'$2' endef # Creation of .eps files from .fig files # $(call convert-fig,<fig file>,<output file>,[gray]) convert-fig = $(FIG2DEV) -L $(if $(filter %.pdf,$2),pdf,eps) $(if $3,-N,) $1 $2 # Creation of .pstex files from .fig files # $(call convert-fig-pstex,<fig file>,<pstex file>) convert-fig-pstex = $(FIG2DEV) -L pstex $1 $2 > /dev/null 2>&1 # Creation of .pstex_t files from .fig files # $(call convert-fig-pstex-t,<fig file>,<pstex file>,<pstex_t file>) convert-fig-pstex-t = $(FIG2DEV) -L pstex_t -p $3 $1 $2 > /dev/null 2>&1 # Creation of .dot_t files from .dot files # #(call convert-dot-tex,<dot file>,<dot_t file>) convert-dot-tex = $(DOT2TEX) '$1' > '$2' # Converts svg files into .eps files # # $(call convert-svg,<svg file>,<eps file>,[gray]) convert-svg = $(INKSCAPE) --export-eps='$2' '$1' # Converts xvg files into .eps files # # $(call convert-xvg,<xvg file>,<eps file>,[gray]) convert-xvg = $(XMGRACE) '$1' -printfile - -hardcopy -hdevice $(if $3,-mono,) EPS > '$2' # Converts .eps.gz files into .eps files # # $(call convert-epsgz,<eps.gz file>,<eps file>,[gray]) convert-epsgz = $(GUNZIP) -c '$1' $(if $3,| $(call kill-ps-color)) > '$2' # Converts .eps files into .eps files (usually a no-op, but can make grayscale) # # $(call convert-eps,<in file>,<out file>,[gray]) convert-eps = $(if $3,$(call kill-ps-color) $1 > $2) # The name of the file containing special postscript commands for grayscale gray_eps_file := gray.eps.make # Changes sethsbcolor and setrgbcolor calls in postscript to always produce # grayscale. In general, this is accomplished by writing new versions of those # functions into the user dictionary space, which is looked up before the # global or system dictionaries (userdict is one of the permanent dictionaries # in postscript and is not read-only like systemdict). # # For setrgbcolor, the weighted average of the triple is computed and the # triple is replaced with three copies of that average before the original # procedure is called: .299R + .587G + .114B # # For sethsbcolor, the color is first converted to RGB, then to grayscale by # the new setrgbcolor operator as described above. Why is this done? # Because simply using the value component will tend to make pure colors # white, a very undesirable thing. Pure blue should not translate to white, # but to some level of gray. Conversion to RGB does the right thing. It's # messy, but it works. # # From # http://en.wikipedia.org/wiki/HSV_color_space#Transformation_from_HSV_to_RGB, # HSB = HSV (Value = Brightness), and the formula used to convert to RGB is # as follows: # # Hi = int(floor(6 * H)) mod 6 # f = 6 * H - Hi # p = V(1-S) # q = V(1-fS) # t = V(1-(1-f)S) # if Hi = 0: R G B <-- V t p # if Hi = 1: R G B <-- q V p # if Hi = 2: R G B <-- p V t # if Hi = 3: R G B <-- p q V # if Hi = 4: R G B <-- t p V # if Hi = 5: R G B <-- V p q # # The messy stack-based implementation is below # $(call create-gray-eps-file,filename) define create-gray-eps-file $(ECHO) -n -e '\ /OLDRGB /setrgbcolor load def\n\ /setrgbcolor {\n\ .114 mul exch\n\ .587 mul add exch\n\ .299 mul add\n\ dup dup\n\ OLDRGB\n\ } bind def\n\ /OLDHSB /sethsbcolor load def\n\ /sethsbcolor {\n\ 2 index % H V S H\n\ 6 mul floor cvi 6 mod % Hi V S H\n\ 3 index % H Hi V S H\n\ 6 mul % 6H Hi V S H\n\ 1 index % Hi 6H Hi V S H\n\ sub % f Hi V S H\n\ 2 index 1 % 1 V f Hi V S H\n\ 4 index % S 1 V f Hi V S H\n\ sub mul % p f Hi V S H\n\ 3 index 1 % 1 V p f Hi V S H\n\ 6 index % S 1 V p f Hi V S H\n\ 4 index % f S 1 V p f Hi V S H\n\ mul sub mul % q p f Hi V S H\n\ 4 index 1 1 % 1 1 V q p f Hi V S H\n\ 5 index % f 1 1 V q p f Hi V S H\n\ sub % (1-f) 1 V q p f Hi V S H\n\ 8 index % S (1-f) 1 V q p f Hi V S H\n\ mul sub mul % t q p f Hi V S H\n\ 4 -1 roll pop % t q p Hi V S H\n\ 7 -2 roll pop pop % t q p Hi V\n\ 5 -2 roll % Hi V t q p\n\ dup 0 eq\n\ {1 index 3 index 6 index}\n\ {\n\ dup 1 eq\n\ {3 index 2 index 6 index}\n\ {\n\ dup 2 eq\n\ {4 index 2 index 4 index}\n\ {\n\ dup 3 eq\n\ {4 index 4 index 3 index}\n\ {\n\ dup 4 eq\n\ {2 index 5 index 3 index}\n\ {\n\ dup 5 eq\n\ {1 index 5 index 5 index}\n\ {0 0 0}\n\ ifelse\n\ }\n\ ifelse\n\ }\n\ ifelse\n\ }\n\ ifelse\n\ }\n\ ifelse\n\ }\n\ ifelse % B G R Hi V t q p\n\ setrgbcolor\n\ 5 {pop} repeat\n\ } bind def\n'\ > $1 endef # This actually inserts the color-killing code into a postscript file # $(call kill-ps-color) define kill-ps-color $(SED) -e '/%%EndComments/r $(gray_eps_file)' endef # Converts graphviz .dot files into .eps files # Grayscale is not directly supported by dot, so we pipe it through fig2dev in # that case. # $(call convert-dot,<dot file>,<eps file>,<log file>,[gray]) define convert-dot $(DOT) -Tps '$1' 2>'$3' $(if $4,| $(call kill-ps-color)) > $2; \ $(call colorize-dot-errors,$3) endef # Convert DVI to Postscript # $(call make-ps,<dvi file>,<ps file>,<log file>,[<paper size>]) make-ps = \ $(DVIPS) -o '$2' $(if $(filter-out BEAMER,$4),-t$(firstword $4),) '$1' \ $(if $(filter BEAMER,$4),| $(enlarge_beamer)) > $3 2>&1 # Convert Postscript to PDF # $(call make-pdf,<ps file>,<pdf file>,<log file>,<embed file>) make-pdf = \ $(call ps2pdf,$1,$2,$(filter 1,$(shell $(CAT) '$4'))) > '$3' 2>&1 # Display information about what is being done # $(call echo-build,<input file>,<output file>,[<run number>]) echo-build = $(ECHO) "$(C_BUILD)= $1 --> $2$(if $3, ($3),) =$(C_RESET)" echo-graphic = $(ECHO) "$(C_GRAPHIC)= $1 --> $2 =$(C_RESET)" echo-dep = $(ECHO) "$(C_DEP)= $1 --> $2 =$(C_RESET)" # Display a list of something # $(call echo-list,<values>) echo-list = for x in $1; do $(ECHO) "$$x"; done # # DEFAULT TARGET # .PHONY: all all: $(default_pdf_targets) ; .PHONY: all-pdf all-pdf: $(default_pdf_targets) ; ifneq "$(strip $(BUILD_STRATEGY))" "pdflatex" .PHONY: all-ps all-ps: $(default_ps_targets) ; .PHONY: all-dvi all-dvi: $(default_dvi_targets) ; endif # # VIEWING TARGET # .PHONY: show show: all $(QUIET)for x in $(default_pdf_targets); do \ [ -e "$$x" ] && $(VIEW_PDF) $$x & \ done # # INCLUDES # source_includes := $(addsuffix .d,$(source_stems_to_include)) graphic_includes := $(addsuffix .gpi.d,$(graphic_stems_to_include)) # Include only the dependencies used ifneq "" "$(source_includes)" include $(source_includes)$(call include-message,$(source_includes)) endif ifneq "" "$(graphic_includes)" include $(graphic_includes)$(call include-message,$(graphic_includes)) endif # # MAIN TARGETS # # Note that we don't just say %: %.pdf here - this can tend to mess up our # includes, which detect what kind of file we are asking for. For example, # asking to build foo.pdf is much different than asking to build foo when # foo.gpi exists, because we look through all of the goals for *.pdf that # matches *.gpi, then use that to determine which include files we need to # build. # # Thus, we invoke make recursively with better arugments instead, restarting # all of the appropriate machinery. .PHONY: $(default_stems_ss) $(default_stems_ss): %: %.pdf ; # This builds and displays the wanted file. .PHONY: $(addsuffix ._show,$(stems_ssg)) %._show: %.pdf $(QUIET)$(VIEW_PDF) $< & ifneq "$(strip $(BUILD_STRATEGY))" "pdflatex" .SECONDARY: $(all_pdf_targets) %.pdf: %.ps %.embed.make $(QUIET)$(call echo-build,$<,$@) $(QUIET)$(call make-pdf,$<,$@.temp,$@.log,$*.embed.make); \ if [ x"$$?" = x"0" ]; then \ $(if $(VERBOSE),$(CAT) $@.log,:); \ $(RM) -f '$@'; \ $(MV) '$@.temp' '$@'; \ $(TOUCH) '$@'; \ $(call copy-with-logging,$@,$(BINARY_TARGET_DIR)); \ else \ $(CAT) $@.log; \ $(call remove-temporary-files,'$@.temp'); \ $(sh_false); \ fi .SECONDARY: $(all_ps_targets) %.ps: %.dvi %.paper.make $(QUIET)$(call echo-build,$<,$@) $(QUIET)$(call make-ps,$<,$@.temp,$@.log,\ $(firstword $(shell $(CAT) $*.paper.make))); \ if [ x"$$?" = x"0" ]; then \ $(if $(VERBOSE),$(CAT) $@.log,:); \ $(RM) -f '$@'; \ $(MV) '$@.temp' '$@'; \ $(TOUCH) '$@'; \ $(call copy-with-logging,$@,$(BINARY_TARGET_DIR)); \ else \ $(CAT) $@.log; \ $(call remove-temporary-files,'$@.temp'); \ $(sh_false); \ fi endif # Build the final target (dvi or pdf) file. This is a very tricky rule because # of the way that latex runs multiple times, needs graphics after the first run # (or maybe already has them), and relies on bibliographies or indices that may # not exist. # # Check the log for fatal errors. If they exist, colorize and bail. # # Create the .auxtarget.cookie file. (Needed for next time if not present) # # If any of the following are true, we must rebuild at least one time: # # * the .bbl was recently rebuilt # # check a cookie, then delete it # # * any of several output files was created or changed: # # check $*.run.cookie, then delete it # # * the .aux file changed in a way that necessitates attention # # Note that if the .auxtarget.make file doesn't exist, this means # that we are doing a clean build, so it doesn't figure into the # test for running again. # # compare against .auxtarget.make # # move if different, remove if not # # * the .log file has errors or warnings requiring at least one more run # # We use a loop over a single item to simplify the process of breaking # out when we find one of the conditions to be true. # # If we do NOT need to run latex here, then we move the $@.1st.make file # over to $@ because the target file has already been built by the first # dependency run and is valid. # # If we do, we delete that cookie file and do the normal multiple-runs # routine. # ifneq "$(strip $(BUILD_STRATEGY))" "pdflatex" .SECONDARY: $(all_dvi_targets) endif %.$(build_target_extension): %.bbl %.aux %.$(build_target_extension).1st.make $(QUIET)\ fatal=`$(call colorize-latex-errors,$*.log)`; \ if [ x"$$fatal" != x"" ]; then \ $(ECHO) "$$fatal"; \ exit 1; \ fi; \ $(call make-auxtarget-file,$*.aux.make,$*.auxtarget.cookie); \ run=0; \ for i in 1; do \ if $(call test-exists,$*.bbl.cookie); then \ run=1; \ break; \ fi; \ if $(call test-exists,$*.run.cookie); then \ run=1; \ break; \ fi; \ if $(call \ test-exists-and-different,$*.auxtarget.cookie,$*.auxtarget.make);\ then \ run=1; \ break; \ fi; \ if $(call test-log-for-need-to-run,$*); then \ run=1; \ break; \ fi; \ done; \ $(call remove-temporary-files,$*.bbl.cookie $*.run.cookie); \ $(MV) $*.auxtarget.cookie $*.auxtarget.make; \ if [ x"$$run" = x"1" ]; then \ $(call remove-files,$@.1st.make); \ for i in 2 3 4 5; do \ $(if $(findstring 3.79,$(MAKE_VERSION)),\ $(call echo-build,$*.tex,$@,$(RESTARTS)-$$$$i),\ $(call echo-build,$*.tex,$@,$(RESTARTS)-$$i)\ ); \ $(call run-latex,$*); \ $(CP) '$*.log' '$*.'$(RESTARTS)-$$i'.log'; \ $(call test-run-again,$*) || break; \ done; \ else \ $(MV) '$@.1st.make' '$@'; \ fi; \ $(call copy-with-logging,$@,$(BINARY_TARGET_DIR)); \ $(call latex-color-log,$*) # Build the .bbl file. When dependencies are included, this will (or will # not!) depend on something.bib, which we detect, acting accordingly. The # dependency creation also produces the %.auxbbl.make file. BibTeX is a bit # finicky about what you call the actual files, but we can rest assured that if # a .auxbbl.make file exists, then the .aux file does, as well. The # .auxbbl.make file is a cookie indicating whether the .bbl needs to be # rewritten. It only changes if the .aux file changes in ways relevant to .bbl # creation. # # Note that we do NOT touch the .bbl file if there is no need to # create/recreate it. We would like to leave existing files alone if they # don't need to be changed, thus possibly avoiding a rebuild trigger. %.bbl: %.auxbbl.make $(QUIET)\ $(if $(filter %.bib,$^),\ $(call echo-build,$(filter %.bib,$?) $*.aux,$@); \ $(call run-bibtex,$*); \ $(TOUCH) $@.cookie; \ ) \ if $(EGREP) -q 'bibstyle.(apacann|chcagoa|[^}]*annot)' '$*.aux'; then \ $(call echo-build,** annotated extra latex **,output ignored,$(RESTARTS)-1); \ $(call run-latex,$*); \ $(CP) '$*.log' '$*.$(RESTARTS)-annotated.log'; \ $(if $(filter %.bib,$^),\ $(call echo-build,** annotated extra bibtex ** $(filter %.bib,$?) $*.aux,$@); \ $(call run-bibtex,$*); \ $(TOUCH) $@.cookie; \ ) \ $(call echo-build,** annotated extra latex **,output ignored,$(RESTARTS)-2); \ $(call run-latex,$*); \ fi # Create the index file - note that we do *not* depend on %.tex here, since # that unnecessarily restricts the kinds of indices that we can build to those # with exactly the same stem as the source file. Things like splitidx create # idx files with other names. # # Therefore, we add the .tex dependency in the sourcestem.d file in the call to # get index file dependencies from the logs. %.ind: %.idx $(QUIET)$(call echo-build,$<,$@) $(QUIET)$(call run-makeindex,$<,$@,$*.ilg) # Create the glossary file %.gls: %.glo %.tex $(QUIET)$(call echo-build,$<,$@) $(QUIET)$(call run-makeindex,$<,$@,$*.glg,-s nomencl.ist) # Create the nomenclature file %.nls: %.nlo %.tex $(QUIET)$(call echo-build,$<,$@) $(QUIET)$(call run-makeindex,$<,$@,$*.nlg,-s nomencl.ist) # SCRIPTED LaTeX TARGETS # # Keep the generated .tex files around for debugging if needed. .SECONDARY: $(all_tex_targets) %.tex:: %.tex.sh $(QUIET)$(call run-script,$(SHELL),$<,$@) %.tex:: %.tex.py $(QUIET)$(call run-script,$(PYTHON),$<,$@) %.tex:: %.tex.pl $(QUIET)$(call run-script,$(PERL),$<,$@) %.tex:: %.rst $(RST_STYLE_FILE) $(QUIET)\ $(call run-script,$(RST2LATEX)\ --documentoptions=letterpaper\ $(if $(RST_STYLE_FILE),--stylesheet=$(RST_STYLE_FILE),),$<,$@) # # GRAPHICS TARGETS # .PHONY: all-graphics all-graphics: $(all_graphics_targets); ifneq "$(strip $(BUILD_STRATEGY))" "pdflatex" .PHONY: all-pstex all-pstex: $(all_pstex_targets); endif .PHONY: all-dot2tex all-dot2tex: $(all_dot2tex_targets); .PHONY: show-graphics show-graphics: all-graphics $(VIEW_GRAPHICS) $(all_known_graphics) $(gray_eps_file): $(QUIET)$(call echo-build,$^,$@) $(QUIET)$(call create-gray-eps-file,$@) ifeq "$(strip $(BUILD_STRATEGY))" "pdflatex" %.pdf: %.eps $(if $(GRAY),$(gray_eps_file)) $(QUIET)$(call echo-graphic,$^,$@) $(QUIET)$(call convert-eps-to-pdf,$<,$@,$(GRAY)) ifeq "$(strip $(GNUPLOT_OUTPUT_EXTENSION))" "pdf" %.pdf: %.gpi %.gpi.d $(gpi_sed) $(QUIET)$(call echo-graphic,$^,$@) $(QUIET)$(call convert-gpi,$<,$@,$(GRAY)) endif %.pdf: %.fig $(QUIET)$(call echo-graphic,$^,$@) $(QUIET)$(call convert-fig,$<,$@,$(GRAY)) endif %.eps: %.gpi %.gpi.d $(gpi_sed) $(QUIET)$(call echo-graphic,$^,$@) $(QUIET)$(call convert-gpi,$<,$@,$(GRAY)) %.eps: %.fig $(QUIET)$(call echo-graphic,$^,$@) $(QUIET)$(call convert-fig,$<,$@,$(GRAY)) %.eps: %.dot $(if $(GRAY),$(gray_eps_file)) $(QUIET)$(call echo-graphic,$^,$@) $(QUIET)$(call convert-dot,$<,$@,$<.log,$(GRAY)) %.eps: %.xvg $(if $(GRAY),$(gray_eps_file)) $(QUIET)$(call echo-graphic,$^,$@) $(QUIET)$(call convert-xvg,$<,$@,$(GRAY)) %.eps: %.svg $(if $(GRAY),$(gray_eps_file)) $(QUIET)$(call echo-graphic,$^,$@) $(QUIET)$(call convert-svg,$<,$@,$(GRAY)) %.eps: %.jpg $(if $(GRAY),$(gray_eps_file)) $(QUIET)$(call echo-graphic,$^,$@) $(QUIET)$(call convert-jpg,$<,$@,$(GRAY)) %.eps: %.png $(if $(GRAY),$(gray_eps_file)) $(QUIET)$(call echo-graphic,$^,$@) $(QUIET)$(call convert-png,$<,$@,$(GRAY)) %.eps: %.eps.gz $(if $(GRAY),$(gray_eps_file)) $(QUIET)$(call echo-graphic,$^,$@) $(QUIET)$(call convert-epsgz,$<,$@,$(GRAY)) %.pstex: %.fig $(QUIET)$(call echo-graphic,$^,$@) $(QUIET)$(call convert-fig-pstex,$<,$@,$(GRAY)) %.pstex_t: %.fig %.pstex $(QUIET)$(call echo-graphic,$^,$@) $(QUIET)$(call convert-fig-pstex-t,$<,$@,$*.pstex,$(GRAY)) %.dot_t: %.dot $(QUIET)$(call echo-graphic,$^,$@) $(QUIET)$(call convert-dot-tex,$<,$@) # # DEPENDENCY-RELATED TARGETS. # # Generate all of the information needed to get dependencies # As a side effect, this creates a .dvi or .pdf file (depending on the build # strategy). We need to be sure to remove it if there are errors. Errors can # take several forms and all of them are found within the log file: # * There was a LaTeX error # * A needed file was not found # * Cross references need adjustment # # Behavior: # This rule is responsible for generating the following: # %.aux # %.d # %.aux.make # %.(pdf|dvi).1st.make (the .pdf or .dvi output file, moved) # # Steps: # # Run latex # Move .pdf or .dvi somewhere else (make no judgements about success) # Flatten the .aux file into another file # Add source dependencies # Add graphic dependencies # Add bib dependencies # # Create cookies for various suffixes that may represent files that # need to be read by LaTeX in order for it to function properly. # # Note that if some of the dependencies are discovered because they turn # up missing in the log file, we really need the .d file to be reloaded. # Adding a sleep command helps with this. Otherwise make is extremely # nondeterministic, sometimes working, sometimes not. # # Usually we can force this by simply removing the generated pdf file and # not creating a .1st.make file.. # %.$(build_target_extension).1st.make %.d %.aux %.aux.make %.fls: %.tex $(QUIET)$(call echo-build,$<,$*.d $*.$(build_target_extension).1st.make,$(RESTARTS)-1) $(QUIET)\ $(call run-latex,$<,--recorder) || $(sh_true); \ $(CP) '$*.log' '$*.$(RESTARTS)-1.log'; \ $(call die-on-dot2tex,$*.log); \ $(call die-on-no-aux,$*); \ $(call flatten-aux,$*.aux,$*.aux.make); \ $(ECHO) "# vim: ft=make" > $*.d; \ $(ECHO) ".PHONY: $*._graphics" >> $*.d; \ $(call get-inputs,$*.fls,$(addprefix $*.,aux aux.make d $(build_target_extension))) >> $*.d; \ $(call get-missing-inputs,$*.log,$(addprefix $*.,aux aux.make d $(build_target_extension))) >> $*.d; \ $(ECHO) ".SECONDEXPANSION:" >> $*.d; \ $(call get-graphics,$*) >> $*.d; \ $(call get-log-index,$*,$(addprefix $*.,d aux aux.make)) >> $*.d; \ $(call get-bibs,$*.aux.make,$(addprefix $*.,bbl aux aux.make)) >> $*.d; \ $(EGREP) -q "# MISSING" $*.d && $(SLEEP) 1 && $(RM) $*.pdf; \ $(call move-if-exists,$*.$(build_target_extension),$*.$(build_target_extension).1st.make); \ for s in toc out lot lof lol nav; do \ if [ -e "$*.$$s" ]; then \ if ! $(DIFF) -q $*.$$s $*.$$s.make >/dev/null 2>&1; then \ $(TOUCH) $*.run.cookie; \ fi; \ $(CP) $*.$$s $*.$$s.make; \ fi; \ done # This is a cookie that is updated if the flattened aux file has changed in a # way that affects the bibliography generation. .SECONDARY: $(addsuffix .auxbbl.make,$(stems_ssg)) %.auxbbl.make: %.aux.make $(QUIET)\ $(call make-auxbbl-file,$<,$@.temp); \ $(call replace-if-different-and-remove,$@.temp,$@) # Build a dependency file for .gpi files. These often plot data files that # also reside in the directory, so if a data file changes, it's nice to know # about it. This also handles loaded .gpi files, whose filename should have # _include_. in it. %.gpi.d: %.gpi $(QUIET)$(call echo-build,$<,$@) $(QUIET)$(call make-gpi-d,$<,$@) # Store the paper size for this document -- note that if beamer is used we set # it to the special BEAMER paper size. We only do this, however, if the # special comment exists, in which case we enlarge the output with psnup. # # The paper size is extracted from a documentclass attribute. %.paper.make: %.tex $(QUIET)$(SED) \ -e '/\\documentclass/,/}/{' \ -e ' s/%.*//' \ -e ' H' \ -e ' /}/{' \ -e ' s/.*//' \ -e ' x' \ -e ' /\\documentclass/!d' \ -e ' s/[\n[:space:]]*//g' \ -e ' s/\([,{[]\)\([[:alnum:]]\{1,\}\)paper\([],}]\)/\1%-\2-%\3/g' \ -e ' s/\([,{[]\)\(landscape\)\([],}]\)/\1%-\2-%\3/g' \ -e ' s/^[^%]*%-//' \ -e ' s/-%[^%]*$$//' \ -e ' s/-%[^%]%-/ /g' \ -e ' p' \ -e ' }' \ -e ' d' \ -e '}' \ -e 'd' \ $< > $@; \ $(EGREP) -q '^[^%]*\\documentclass[^{]*{beamer}' $< && \ (\ $(EGREP) -q '^%%[[:space:]]*BEAMER[[:space:]]*LARGE$$' $< && \ $(ECHO) "BEAMER" > $@ || \ : > $@ \ ) || $(sh_true) # Store embedding instructions for this document using a special comment %.embed.make: %.tex $(QUIET)$(EGREP) '^%%[[:space:]]*NO[[:space:]]*EMBED[[:space:]]*$$' $< \ && $(ECHO) '' > $@ \ || $(ECHO) '1' > $@; # # HELPFUL PHONY TARGETS # .PHONY: _all_programs _all_programs: $(QUIET)$(ECHO) "== All External Programs Used ==" $(QUIET)$(call output-all-programs) .PHONY: _check_programs _check_programs: $(QUIET)$(ECHO) "== Checking Makefile Dependencies =="; $(ECHO) $(QUIET) \ $(ECHO) hi; \ allprogs=`\ ($(call output-all-programs)) | \ $(SED) \ -e 's/^[[:space:]]*//' \ -e '/^#/d' \ -e 's/[[:space:]]*#.*//' \ -e '/^=/s/[[:space:]]/_/g' \ -e '/^[[:space:]]*$$/d' \ -e 's/^[^=].*=[[:space:]]*\([^[:space:]]\{1,\}\).*$$/\\1/' \ `; \ spaces=' '; \ for p in $${allprogs}; do \ case $$p in \ =*) $(ECHO); $(ECHO) "$$p";; \ *) \ $(ECHO) -n "$$p:$$spaces" | $(SED) -e 's/^\(.\{0,20\}\).*$$/\1/'; \ loc=`$(WHICH) $$p`; \ if [ x"$$?" = x"0" ]; then \ $(ECHO) "$(C_SUCCESS)Found:$(C_RESET) $$loc"; \ else \ $(ECHO) "$(C_FAILURE)Not Found$(C_RESET)"; \ fi; \ ;; \ esac; \ done .PHONY: _check_gpi_files _check_gpi_files: $(QUIET)$(ECHO) "== Checking all .gpi files for common errors =="; \ $(ECHO); \ for f in $(files.gpi); do \ result=`$(EGREP) '^([^#]*set terminal |set output )' $$f`; \ $(ECHO) -n "$$f: "; \ if [ x"$$result" = x"" ]; then \ $(ECHO) "$(C_SUCCESS)Okay$(C_RESET)"; \ else \ $(ECHO) "$(C_FAILURE)Warning: Problematic commands:$(C_RESET)";\ $(ECHO) "$(C_ERROR)$$result$(C_RESET)"; \ fi; \ done; \ $(ECHO) .PHONY: _all_stems _all_stems: $(QUIET)$(ECHO) "== All Stems ==" $(QUIET)$(call echo-list,$(sort $(default_stems_ss))) .PHONY: _includes _includes: $(QUIET)$(ECHO) "== Include Stems ==" $(QUIET)$(ECHO) "=== Sources ===" $(QUIET)$(call echo-list,$(sort $(source_includes))) $(QUIET)$(ECHO) "=== Graphics ===" $(QUIET)$(call echo-list,$(sort $(graphic_includes))) .PHONY: _all_sources _all_sources: $(QUIET)$(ECHO) "== All Sources ==" $(QUIET)$(call echo-list,$(sort $(all_files.tex))) .PHONY: _dependency_graph _dependency_graph: $(QUIET)$(ECHO) "/* LaTeX Dependency Graph */" $(QUIET)$(call output-dependency-graph) .PHONY: _show_dependency_graph _show_dependency_graph: $(QUIET)$(call output-dependency-graph,$(graph_stem).dot) $(QUIET)$(DOT) -Tps -o $(graph_stem).eps $(graph_stem).dot $(QUIET)$(VIEW_POSTSCRIPT) $(graph_stem).eps $(QUIET)$(call remove-temporary-files,$(graph_stem).*) .PHONY: _sources _sources: $(QUIET)$(ECHO) "== Sources ==" $(QUIET)$(call echo-list,$(sort $(files.tex))) .PHONY: _scripts _scripts: $(QUIET)$(ECHO) "== Scripts ==" $(QUIET)$(call echo-list,$(sort $(files_scripts))) .PHONY: _graphic_outputs _graphic_outputs: $(QUIET)$(ECHO) "== Graphic Outputs ==" $(QUIET)$(call echo-list,$(sort $(all_graphics_targets))) .PHONY: _env _env: ifdef .VARIABLES $(QUIET)$(ECHO) "== MAKE VARIABLES ==" $(QUIET)$(call echo-list,$(foreach var,$(sort $(.VARIABLES)),'$(var)')) endif $(QUIET)$(ECHO) "== ENVIRONMENT ==" $(QUIET)$(ENV) # # CLEAN TARGETS # # clean-generated is somewhat unique - it relies on the .fls file being # properly built so that it can determine which of the files was generated, and # which was not. Expect it to silently fail if the .fls file is missing. # # This is used to, e.g., clean up index files that are generated by the LaTeX. .PHONY: clean-generated clean-generated: $(QUIET)$(call clean-files,$(foreach e,$(addsuffix .fls,$(all_stems_source)),\ $(shell $(call get-generated-names,$e)))) .PHONY: clean-deps clean-deps: $(QUIET)$(call clean-files,$(all_d_targets) *.make *.make.temp *.cookie) .PHONY: clean-tex clean-tex: clean-deps $(QUIET)$(call clean-files,$(rm_tex)) .PHONY: clean-graphics # TODO: This *always* deletes pstex files, even if they were not generated by # anything.... In other words, if you create a pstex and pstex_t pair by hand # an drop them in here without the generating fig file, they will be deleted # and you won't get them back. It's a hack put in here because I'm not sure we # even want to keep pstex functionality, so my motivation is not terribly high # for doing it right. clean-graphics: $(QUIET)$(call clean-files,$(all_graphics_targets) $(intermediate_graphics_targets) *.gpi.d *.pstex *.pstex_t *.dot_t) .PHONY: clean-backups clean-backups: $(QUIET)$(call clean-files,$(backup_patterns) *.temp) .PHONY: clean-auxiliary clean-auxiliary: $(QUIET)$(call clean-files,$(graph_stem).*) .PHONY: clean-nographics clean-nographics: clean-tex clean-deps clean-backups clean-auxiliary ; .PHONY: clean clean: clean-generated clean-tex clean-graphics clean-deps clean-backups clean-auxiliary # # HELP TARGETS # .PHONY: help help: $(help_text) .PHONY: version version: $(QUIET)\ $(ECHO) "$(fileinfo) Version $(version)"; \ $(ECHO) "by $(author)"; \ # # HELP TEXT # define help_text # $(fileinfo) Version $(version) # # by $(author) # # Generates a number of possible output files from a LaTeX document and its # various dependencies. Handles .bib files, \include and \input, and .eps # graphics. All dependencies are handled automatically by running LaTeX over # the source. # # USAGE: # # make [GRAY=1] [VERBOSE=1] [SHELL_DEBUG=1] <target(s)> # # STANDARD OPTIONS: # GRAY: # Setting this variable forces all recompiled graphics to be grayscale. # It is useful when creating a document for printing. The default is # to allow colors. Note that it only changes graphics that need to be # rebuilt! It is usually a good idea to do a 'make clean' first. # # VERBOSE: # This turns off all @ prefixes for commands invoked by make. Thus, # you get to see all of the gory details of what is going on. # # SHELL_DEBUG: # This enables the -x option for sh, meaning that everything it does is # echoed to stderr. This is particularly useful for debugging # what is going on in $$(shell ...) invocations. One of my favorite # debugging tricks is to do this: # # make -d SHELL_DEBUG=1 VERBOSE=1 2>&1 | less # # STANDARD AUXILIARY FILES: # # Makefile.ini # # This file can contain variable declarations that override various # aspects of the makefile. For example, one might specify # # neverclean := *.pdf *.ps # onlysources.tex := main.tex # LATEX_COLOR_WARNING := 'bold red uline' # # And this would override the neverclean setting to ensure that pdf # and ps files always remain behind, set the makefile to treat all # .tex files that are not "main.tex" as includes (and therefore not # default targets). It also changes the LaTeX warning output to be # red, bold, and underlined. # # There are numerous variables in this file that can be overridden in # this way. Search for '?=' to find them all. # # Also, you can put arbitrary targets into it if, for example, you # want your source built from something else, e.g.: # # generated.tex: generating_script.weird_lang depA depB # ./generating_script.weird_lang > $$@ # # Note that if you are not careful, you can override the default # target (what happens when you type "make" without arguments), so if # you do use Makefile.ini, you probably want to start it with # something like the following line: # # default: all # # Since the first target in any makefile is automatically the default, # and the makefile already has a sensible "all" target, this will do # what you want. # # The Makefile.ini is imported before *anything else* is done, so go # wild with your ideas for changes to this makefile in there. It # makes it easy to test them before submitting patches. # # STANDARD ENVIRONMENT VARIABLES: # # LATEX_COLOR_WARNING '$(LATEX_COLOR_WARNING)' # LATEX_COLOR_ERROR '$(LATEX_COLOR_ERROR)' # LATEX_COLOR_UNDERFULL '$(LATEX_COLOR_UNDERFULL)' # LATEX_COLOR_OVERFULL '$(LATEX_COLOR_OVERFULL)' # LATEX_COLOR_PAGES '$(LATEX_COLOR_PAGES)' # LATEX_COLOR_BUILD '$(LATEX_COLOR_BUILD)' # LATEX_COLOR_GRAPHIC '$(LATEX_COLOR_GRAPHIC)' # LATEX_COLOR_DEP '$(LATEX_COLOR_DEP)' # LATEX_COLOR_SUCCESS '$(LATEX_COLOR_SUCCESS)' # LATEX_COLOR_FAILURE '$(LATEX_COLOR_FAILURE)' # # These may be redefined in your environment to be any of the following: # # black # red # green # yellow # blue # magenta # cyan # white # # Bold or underline may be used, as well, either alone or in combination # with colors: # # bold # uline # # Order is not important. You may want, for example, to specify: # # export LATEX_COLOR_SUCCESS='bold blue uline' # # in your .bashrc file. I don't know why, but you may want to. # # STANDARD TARGETS: # # all: # Make all possible documents in this directory. The documents are # determined by scanning for .tex and .tex.sh (described in more detail # later) and omitting any file that ends in ._include_.tex or # ._nobuild_.tex. The output is a set of .pdf files. # # If you wish to omit files without naming them with the special # underscore names, set the following near the top of the Makefile, # or (this is recommended) within a Makefile.ini in the same directory: # # includes.tex := file1.tex file2.tex # # This will cause the files listed to be considered as include files. # # If you have only few source files, you can set # # onlysources.tex := main.tex # # This will cause only the source files listed to be considered in # dependency detection. All other .tex files will be considered as # include files. Note that these options work for *any* source type, # so you could do something similar with includes.gpi, for example. # Note that this works for *any valid source* target. All of the # onlysources.* variables are commented out in the shipping version of # this file, so it does the right thing when they simply don't exist. # The comments are purely documentation. If you know, for example, that # file.mycoolformat is supported by this Makefile, but don't see the # "onlysources.mycoolformat" declared in the comments, that doesn't mean # you can't use it. Go ahead and set "onlysources.mycoolformat" and it # should do the right thing. # # show: # Builds and displays all documents in this directory. It uses the # environment-overridable value of VIEW_PDF (currently $(VIEW_PDF)) to # do its work. # # all-graphics: # Make all of the graphics in this directory. # # all-pstex (only for BUILD_STRATEGY=latex): # Build all fig files into pstex and pstex_t files. Gray DOES NOT WORK. # # all-gray-pstex (only for BUILD_STRATEGY=latex): # Build all fig files into grayscale pstex and pstex_t files. # # all-dot2tex: # Build all dot files into tex files. # # show-graphics: # Builds and displays all graphics in this directory. Uses the # environment-overridable value of VIEW_GRAPHICS (currently # $(VIEW_GRAPHICS)) to do its work. # # clean: # Remove ALL generated files, leaving only source intact. # This will *always* skip files mentioned in the "neverclean" variable, # either in this file or specified in Makefile.ini: # # neverclean := *.pdf *.ps # # The neverclean variable works on all "clean" targets below, as well. # # clean-graphics: # Remove all generated graphics files. # # clean-backups: # Remove all backup files: $(backup_patterns) # (XFig and other editors have a nasty habit of leaving them around) # Also removes Makefile-generated .temp files # # clean-tex: # Remove all files generated from LaTeX invocations except dependency # information. Leaves graphics alone. # # clean-deps: # Removes all auto-generated dependency information. # # clean-auxiliary: # Removes extra files created by various targets (like the dependency # graph output). # # clean-nographics: # Cleans everything *except* the graphics files. # # help: # This help text. # # version: # Version information about this LaTeX makefile. # # DEBUG TARGETS: # # _all_programs: # A list of the programs used by this makefile. # # _check_programs: # Checks your system for the needed software and reports what it finds. # # _check_gpi_files: # Checks the .gpi files in the current directory for common errors, such # as specification of the terminal or output file inside of the gpi file # itself. # # _dependency_graph: # Outputs a .dot file to stdout that represents a graph of LaTeX # dependencies. To see it, use the _show_dependency_graph target or # direct the output to a file, run dot on it, and view the output, e.g.: # # make _dependency_graph > graph.dot # dot -T ps -o graph.eps graph.dot # gv graph.eps # # _show_dependency_graph: # Makes viewing the graph simple: extracts, builds and displays the # dependency graph given in the _dependency_graph target using the value # of the environment-overridable VIEW_POSTSCRIPT variable (currently set # to $(VIEW_POSTSCRIPT)). The postscript viewer is used because it # makes it easier to zoom in on the graph, a critical ability for # something so dense and mysterious. # # _all_sources: # List all .tex files in this directory. # # _sources: # Print out a list of all compilable sources in this directory. This is # useful for determining what make thinks it will be using as the # primary source for 'make all'. # # _scripts: # Print out a list of scripts that make knows can be used to generate # .tex files (described later). # # _all_stems: # Print a list of stems. These represent bare targets that can be # executed. Listing <stem> as a bare target will produce <stem>.pdf. # # _includes: # A list of .d files that would be included in this run if _includes # weren't specified. This target may be used alone or in conjunction # with other targets. # # _graphic_outputs: # A list of all generated .eps files # # _env: # A list of environment variables and their values. If supported by # your version of make, also a list of variables known to make. # # FILE TARGETS: # # %, %.pdf: # Build a PDF file from the corresponding %.tex file. # # If BUILD_STRATEGY=pdflatex, then this builds the pdf directly. # Otherwise, it uses this old-school but effective approach: # # latex -> dvips -> ps2pdf # # The BUILD_STRATEGY can be overridden in Makefile.ini in the same # directory. The default is pdflatex. # # Reasons for using latex -> dvips include the "psfrag" package, and the # generation of postscript instead of PDF. Arguments for using pdflatex # include "new and shiny" and "better supported." I can't argue with # either of those, and supporting them both didn't turn out to be that # difficult, so there you have it. Choices. # # %._show: # A phony target that builds the pdf file and then displays it using the # environment-overridable value of VIEW_PDF ($(VIEW_PDF)). # # %._graphics: # A phony target that generates all graphics on which %.pdf (or %.dvi) # depends. # # %.ps (only for BUILD_STRATEGY=latex): # Build a Postscript file from the corresponding %.tex file. # This is done using dvips. Paper size is automatically # extracted from the declaration # # \documentclass[<something>paper] # # or it is the system default. # # If using beamer (an excellent presentation class), the paper # size is ignored. More on this later. # # %.dvi (only for BUILD_STRATEGY=latex): # Build the DVI file from the corresponding %.tex file. # # %.ind: # Build the index for this %.tex file. # # %.gls: # Build the nomenclature glossary for this %.tex file. # # %.nls: # Build the (newer) nomenclature file for this %.tex file. # # %.eps: # Build an eps file from one of the following file types: # # .dot : graphviz # .gpi : gnuplot # .fig : xfig # .xvg : xmgrace # .svg : scalable vector graphics (goes through inkscape) # .png : png (goes through NetPBM) # .jpg : jpeg (goes through ImageMagick) # .eps.gz : gzipped eps # # The behavior of this makefile with each type is described in # its own section below. # # %.pstex{,_t} (only for BUILD_STRATEGY=latex): # Build a .pstex_t file from a .fig file. # # FEATURES: # # Optional Binary Directory: # If you create the _out_ directory in the same place as the makefile, # it will automatically be used as a dumping ground for .pdf (or .dvi, # .ps, and .pdf) output files. # # Alternatively, you can set the BINARY_TARGET_DIR variable, either as a # make argument or in Makefile.ini, to point to your directory of # choice. Note that no pathname wildcard expansion is done in the # makefile, so make sure that the path is complete before going in # there. E.g., if you want to specify something in your home directory, # use $$HOME/ instead of ~/ so that the shell expands it before it gets # to the makefile. # # External Program Dependencies: # Every external program used by the makefile is represented by an # ALLCAPS variable at the top of this file. This should allow you to # make judgments about whether your system supports the use of this # makefile. The list is available in the ALL_PROGRAMS variable and, # provided that you are using GNU make 3.80 or later (or you haven't # renamed this file to something weird like "mylatexmakefile" and like # invoking it with make -f) can be viewed using # # make _all_programs # # Additionally, the availability of these programs can be checked # automatically for you by running # # make _check_programs # # The programs are categorized according to how important they are and # what function they perform to help you decide which ones you really # need. # # Colorized Output: # The output of commands is colorized to highlight things that are often # important to developers. This includes {underfull,overfull} # {h,v}boxes, general LaTeX Errors, each stage of document building, and # the number of pages in the final document. The colors are obtained # using 'tput', so colorization should work pretty well on any terminal. # # The colors can be customized very simply by setting any of the # LATEX_COLOR_<CONTEXT> variables in your environment (see above). # # Predecessors to TeX Files: # Given a target <target>, if no <target>.tex file exists but a # corresponding script or predecessor file exists, then appropriate # action will be taken to generate the tex file. # # Currently supported script or predecessor languages are: # # sh: %.tex.sh # perl: %.tex.pl # python: %.tex.py # # Calls the script using the appropriate interpreter, assuming that # its output is a .tex file. # # The script is called thus: # # <interpreter> <script file name> <target tex file> # # and therefore sees exactly one parameter: the name of the .tex # file that it is to create. # # Why does this feature exist? I ran into this while working on # my paper dissertation. I wrote a huge bash script that used a # lot of sed to bring together existing papers in LaTeX. It # would have been nice had I had something like this to make my # life easier, since as it stands I have to run the script and # then build the document with make. This feature provides hooks # for complicated stuff that you may want to do, but that I have # not considered. It should work fine with included dependencies, # too. # # Scripts are run every time make is invoked. Some trickery is # employed to make sure that multiple restarts of make don't cause # them to be run again. # # reST: %.rst # # Runs the reST to LaTeX converter to generate a .tex file # If it finds a file names _rststyle_._include_.tex, uses it as # the "stylesheet" option to rst2latex. # # Note that this does not track sub-dependencies in rst files. It # assumes that the top-level rst file will change if you want a # rebuild. # # Dependencies: # # In general, dependencies are extracted directly from LaTeX output on # your document. This includes # # * Bibliography information # * \include or \input files (honoring \includeonly, too) # * Graphics files inserted by the graphicx package # # Where possible, all of these are built correctly and automatically. # In the case of graphics files, these are generated from the following # file types: # # GraphViz: .dot # GNUPlot: .gpi # XFig: .fig # XMgrace: .xvg # SVG: .svg # PNG: .png # JPEG: .jpg # GZipped EPS: .eps.gz # # If the file exists as a .eps already, it is merely used (and will not # be deleted by 'clean'!). # # LaTeX and BibTeX are invoked correctly and the "Rerun to get # cross-references right" warning is heeded a reasonable number of # times. In my experience this is enough for even the most troublesome # documents, but it can be easily changed (if LaTeX has to be run after # BibTeX more than three times, it is likely that something is moving # back and forth between pages, and no amount of LaTeXing will fix # that). # # \includeonly is honored by this system, so files that are not # specified there will not trigger a rebuild when changed. # # Beamer: # A special TeX source comment is recognized by this makefile (only when # BUILD_STRATEGY=latex, since this invokes psnup): # # %%[[:space:]]*BEAMER[[:space:]]*LARGE # # The presence of this comment forces the output of dvips through psnup # to enlarge beamer slides to take up an entire letter-sized page. This # is particularly useful when printing transparencies or paper versions # of the slides. For some reason landscape orientation doesn't appear # to work, though. # # If you want to put multiple slides on a page, use this option and then # print using mpage, a2ps, or psnup to consolidate slides. My personal # favorite is a2ps, but your mileage may vary. # # When beamer is the document class, dvips does NOT receive a paper size # command line attribute, since beamer does special things with sizes. # # GNUPlot Graphics: # When creating a .gpi file, DO NOT INCLUDE the "set terminal" or "set # output" commands! The makefile will include terminal information for # you. Besides being unnecessary and potentially harmful, including the # terminal definition in the .gpi file makes it harder for you, the one # writing the document, to preview your graphics, e.g., with # # gnuplot -persist myfile.gpi # # so don't do specify a terminal or an output file in your .gpi files. # # When building a gpi file into an eps file, there are several features # available to the document designer: # # Global Header: # The makefile searches for the files in the variable GNUPLOT_GLOBAL # in order: # # ($(GNUPLOT_GLOBAL)) # # Only the first found is used. All .gpi files in the directory are # treated as though the contents of GNUPLOT_GLOBAL were directly # included at the top of the file. # # NOTE: This includes special comments! (see below) # # Font Size: # A special comment in a .gpi file (or a globally included file) of # the form # # ## FONTSIZE=<number> # # will change the font size of the GPI output. If font size is # specified in both the global file and the GPI file, the # specification in the individual GPI file is used. # # Grayscale Output: # GNUplot files also support a special comment to force them to be # output in grayscale *no matter what*: # # ## GRAY # # This is not generally advisable, since you can always create a # grayscale document using the forms mentioned above. But, if your # plot simply must be grayscale even in a document that allows # colors, this is how you do it. # # XFig Graphics: # No special handling is done with XFig, except when a global # grayscale method is used, e.g. # # make GRAY=1 document # # In these cases the .eps files is created using the -N switch to # fig2dev to turn off color output. (Only works with eps, not pstex # output) # # GraphVis Graphics: # Color settings are simply ignored here. The 'dot' program is used # to transform a .dot file into a .eps file. # # If you want, you can use the dot2tex program to convert dot files # to tex graphics. The default is to just call dot2tex with no # arguments, but you can change the DOT2TEX definition to include # options as needed (in your Makefile.ini). # # Note that, as with pstex, the makefile cannot use latex's own # output to discover all missing dot_t (output) files, since anytime # TeX includes TeX, it has to bail when it can't find the include # file. It can therefore only stop on the first missing file it # discovers, and we can't get a large list of them out easily. # # So, the makefile errors out if it's missing an included dot_t # file, then prompts the user to run this command manually: # # make all-dot2tex # # GZipped EPS Graphics: # # A .eps.gz file is sometimes a nice thing to have. EPS files can get # very large, especially when created from bitmaps (don't do this if you # don't have to). This makefile will unzip them (not in place) to # create the appropriate EPS file. # endef # # DEPENDENCY CHART: # #digraph "g" { # rankdir=TB # size="9,9" # edge [fontsize=12 weight=10] # node [shape=box fontsize=14 style=rounded] # # eps [ # shape=Mrecord # label="{{<gpi> GNUplot|<epsgz> GZip|<dot> Dot|<fig> XFig}|<eps> eps}" # ] # pstex [label="%.pstex"] # pstex_t [label="%.pstex_t"] # tex_outputs [shape=point] # extra_tex_files [shape=point] # gpi_data [label="<data>"] # gpi_includes [label="_include_.gpi"] # aux [label="%.aux"] # fls [label="%.fls"] # idx [label="%.idx"] # glo [label="%.glo"] # ind [label="%.ind"] # log [label="%.log"] # tex_sh [label="%.tex.sh"] # rst [label="%.rst"] # tex [ # shape=record # label="<tex> %.tex|<include> _include_.tex" # ] # include_aux [label="_include_.aux"] # file_bib [label=".bib"] # bbl [label="%.bbl"] # dvi [label="%.dvi"] # ps [label="%.ps"] # pdf [label="%.pdf"] # fig [label=".fig"] # dot [label=".dot"] # gpi [label=".gpi"] # eps_gz [label=".eps.gz"] # # gpi_files [shape=point] # # rst -> tex:tex [label="reST"] # tex_sh -> tex:tex [label="sh"] # tex_pl -> tex:tex [label="perl"] # tex_py -> tex:tex [label="python"] # tex -> tex_outputs [label="latex"] # tex_outputs -> dvi # tex_outputs -> aux # tex_outputs -> log # tex_outputs -> fls # tex_outputs -> idx # tex_outputs -> include_aux # aux -> bbl [label="bibtex"] # file_bib -> bbl [label="bibtex"] # idx -> ind [label="makeindex"] # glo -> gls [label="makeindex"] # nlo -> nls [label="makeindex"] # gls -> extra_tex_files # nls -> extra_tex_files # ind -> extra_tex_files # bbl -> extra_tex_files # eps -> extra_tex_files # extra_tex_files -> dvi [label="latex"] # gpi_files -> eps:gpi [label="gnuplot"] # gpi -> gpi_files # gpi_data -> gpi_files # gpi_includes -> gpi_files # eps_gz -> eps:epsgz [label="gunzip"] # fig -> eps:fig [label="fig2dev"] # fig -> pstex [label="fig2dev"] # fig -> pstex_t [label="fig2dev"] # pstex -> pstex_t [label="fig2dev"] # dot -> eps:dot [label="dot"] # dvi -> ps [label="dvips"] # include_aux -> bbl [label="bibtex"] # ps -> pdf [label="ps2pdf"] # # edge [ color=blue label="" style=dotted weight=1 fontcolor=blue] # fls -> tex:include [label="INPUT: *.tex"] # fls -> file_bib [label="INPUT: *.aux"] # aux -> file_bib [label="\\bibdata{...}"] # include_aux -> file_bib [label="\\bibdata{...}"] # log -> gpi [label="Graphic file"] # log -> fig [label="Graphic file"] # log -> eps_gz [label="Graphic file"] # log -> dot [label="Graphic file"] # log -> idx [label="No file *.ind"] # log -> glo [label="No file *.gls"] # log -> nlo [label="No file *.nls"] # gpi -> gpi_data [label="plot '...'"] # gpi -> gpi_includes [label="load '...'"] # tex:tex -> ps [label="paper"] # tex:tex -> pdf [label="embedding"] #} # # DEPENDENCY CHART SCRIPT # # $(call output_dependency_graph,[<output file>]) define output-dependency-graph if [ -f '$(this_file)' ]; then \ $(SED) \ -e '/^[[:space:]]*#[[:space:]]*DEPENDENCY CHART:/,/^$$/!d' \ -e '/DEPENDENCY CHART/d' \ -e '/^$$/d' \ -e 's/^[[:space:]]*#//' \ $(this_file) $(if $1,> '$1',); \ else \ $(ECHO) "Cannot determine the name of this makefile."; \ fi endef # vim: noet sts=0 sw=8 ts=8