view flys-artifacts/doc/conf/meta-data.xml @ 1659:ad54896ec369

Write gauge determined in MainValuesService to log. flys-artifacts/trunk@2857 c6561f87-3c4e-4783-a992-168aeb5c3f6f
author Ingo Weinzierl <ingo.weinzierl@intevation.de>
date Wed, 28 Sep 2011 15:17:44 +0000
parents 91d038c7aae5
children 3ca999f507b7
line wrap: on
line source
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<dc:template xmlns:dc="http://www.intevation.org/2011/Datacage">
<datacage>
  <dc:macro name="load-system">
    <dc:context connection="system">
      <dc:statement>
        SELECT id AS river_id, name as river_name FROM rivers
        WHERE lower(name) LIKE lower(${river})
      </dc:statement>
      <dc:elements>
        <river>
          <dc:attribute name="name" value="${river_name}"/>
          <dc:attribute name="db-id" value="${river_id}"/>
          <dc:if test="dc:contains($artifact-outs, 'computed_discharge_curve')">
              <discharge-table-nn>
                <discharge-table-gauge>
                  <dc:context>
                    <dc:statement>
                      SELECT id   AS gauge_id,
                             name AS gauge_name
                      FROM gauges WHERE river_id = ${river_id}
                    </dc:statement>
                    <dc:elements>
                      <gauge>
                        <dc:attribute name="name" value="${gauge_name}"/>
                        <dc:attribute name="db-id" value="${gauge_id}"/>
                        <dc:context>
                          <dc:statement>
                            SELECT description   AS gauge_desc, 
                                   d.id          AS discharge_id,
                                   ti.start_time AS g_start, 
                                   ti.stop_time  AS g_stop
                            FROM discharge_tables d JOIN time_intervals ti 
                            ON d.time_interval_id = ti.id
                            WHERE d.gauge_id = ${gauge_id} AND d.kind = 1
                          </dc:statement>
                          <dc:elements>
                            <historical>
                              <dc:attribute name="name" value="${gauge_desc}"/>
                              <dc:attribute name="from" value="${g_start}"/>
                              <dc:attribute name="to" value="${g_stop}"/>
                              <dc:attribute name="db-id" value="${discharge_id}"/></historical>
                          </dc:elements>
                        </dc:context>
                      </gauge>
                    </dc:elements>
                  </dc:context>
                </discharge-table-gauge>
                <fixations>
                  <dc:attribute name="id" value="fixations-${river_id}"/>
                  <dc:context>
                    <dc:statement>
                      SELECT id          AS fix_id,
                             description AS fix_description
                      FROM wsts WHERE kind = 2 AND river_id = ${river_id}
                    </dc:statement>
                    <dc:elements>
                      <fixation>
                        <dc:attribute name="name" value="${fix_description}"/>
                        <dc:attribute name="db-id" value="${fix_id}"/>
                        <columns>
                          <dc:context>
                            <dc:statement>
                              SELECT id   AS fix_column_id,
                                     name AS fix_column_name
                              FROM wst_columns WHERE wst_id = ${fix_id}
                              ORDER by position
                            </dc:statement>
                            <dc:elements>
                              <column>
                                <dc:attribute name="name" value="${fix_column_name}"/>
                                <dc:attribute name="db-id" value="${fix_column_id}"/></column>
                            </dc:elements>
                          </dc:context>
                        </columns>
                      </fixation>
                    </dc:elements>
                  </dc:context>
                </fixations>
                <flood-protections>
                  <dc:attribute name="id" value="flood-protections-${river_id}"/>
                  <dc:context>
                    <dc:statement>
                      SELECT id          AS prot_id,
                             description AS prot_description
                      FROM wsts WHERE kind = 5 AND river_id = ${river_id}
                    </dc:statement>
                    <dc:elements>
                      <flood-protection>
                        <dc:attribute name="name" value="${prot_description}"/>
                        <dc:attribute name="db-id" value="${prot_id}"/>
                        <columns>
                          <dc:context>
                            <dc:statement>
                              SELECT id   AS prot_column_id,
                                     name AS prot_column_name
                              FROM wst_columns WHERE wst_id = ${prot_id}
                              ORDER by position
                            </dc:statement>
                            <dc:elements>
                              <column>
                                <dc:attribute name="name" value="${prot_column_name}"/>
                                <dc:attribute name="db-id" value="${prot_column_id}"/></column>
                            </dc:elements>
                          </dc:context>
                        </columns>
                      </flood-protection>
                    </dc:elements>
                  </dc:context>
                </flood-protections>
                <flood-water-marks>
                  <dc:attribute name="id" value="flood-water-marks-${river_id}"/>
                  <dc:context>
                    <dc:statement>
                      SELECT id          AS fw_id,
                             description AS fw_description
                      FROM wsts WHERE kind = 4 AND river_id = ${river_id}
                    </dc:statement>
                    <dc:elements>
                      <flood-water-mark>
                        <dc:attribute name="name" value="${fw_description}"/>
                        <dc:attribute name="db-id" value="${fw_id}"/>
                        <columns>
                          <dc:context>
                            <dc:statement>
                              SELECT id   AS fw_column_id,
                                     name AS fw_column_name
                              FROM wst_columns WHERE wst_id = ${fw_id}
                              ORDER by position
                            </dc:statement>
                            <dc:elements>
                              <column>
                                <dc:attribute name="name" value="${fw_column_name}"/>
                                <dc:attribute name="db-id" value="${fw_column_id}"/></column>
                            </dc:elements>
                          </dc:context>
                        </columns>
                      </flood-water-mark>
                    </dc:elements>
                  </dc:context>
                </flood-water-marks>
                <water-levels>
                  <dc:attribute name="id" value="water-levels-${river_id}"/>
                  <dc:context>
                    <dc:statement>
                      SELECT id          AS wl_id,
                             description AS wl_description
                      FROM wsts WHERE kind = 0 AND river_id = ${river_id}
                    </dc:statement>
                    <dc:elements>
                      <water-level>
                        <dc:attribute name="name" value="${wl_description}"/>
                        <dc:attribute name="db-id" value="${wl_id}"/>
                        <columns>
                          <dc:context>
                            <dc:statement>
                              SELECT id   AS wl_column_id,
                                     name AS wl_column_name
                              FROM wst_columns WHERE wst_id = ${wl_id}
                              ORDER by position
                            </dc:statement>
                            <dc:elements>
                              <column>
                                <dc:attribute name="name" value="${wl_column_name}"/>
                                <dc:attribute name="db-id" value="${wl_column_id}"/></column>
                            </dc:elements>
                          </dc:context>
                        </columns>
                      </water-level>
                    </dc:elements>
                  </dc:context>
                </water-levels>
                <extra-longitudinal-sections>
                  <dc:attribute name="id" value="extra-longitudinal-sections-${river_id}"/>
                  <dc:context>
                    <dc:statement>
                      SELECT id          AS els_id,
                             description AS els_description
                      FROM wsts WHERE kind = 1 AND river_id = ${river_id}
                    </dc:statement>
                    <dc:elements>
                      <extra-longitudinal-section>
                        <dc:attribute name="name" value="${els_description}"/>
                        <dc:attribute name="db-id" value="${els_id}"/>
                        <columns>
                          <dc:context>
                            <dc:statement>
                              SELECT id   AS els_column_id,
                                     name AS els_column_name
                              FROM wst_columns WHERE wst_id = ${els_id}
                              ORDER by position
                            </dc:statement>
                            <dc:elements>
                              <column>
                                  <dc:attribute name="name" value="${els_column_name}"/>
                                  <dc:attribute name="db-id" value="${els_column_id}"/></column>
                            </dc:elements>
                          </dc:context>
                        </columns>
                      </extra-longitudinal-section>
                    </dc:elements>
                  </dc:context>
                </extra-longitudinal-sections>
              </discharge-table-nn>
          </dc:if>
          <dc:if test="dc:contains($artifact-outs, 'computed_discharge_curve')">
              <computed-discharge-curve>
                <mainvalue>
                  <dc:attribute name="factory" value="mainvalue"/>
                  <dc:attribute name="db-ids" value="${river_id}"/>
                </mainvalue>
              </computed-discharge-curve>
          </dc:if>
          <dc:if test="dc:contains($artifact-outs, 'longitudinal_section')">
              <longitudinal-section>
                <dc:call-macro name="longitudinal_section-recommended"/>
                <fixations><dc:attribute name="ref" value="fixations-${river_id}"/></fixations>
                <flood-protections><dc:attribute name="ref" value="flood-protections-${river_id}"/></flood-protections>
                <flood-water-marks><dc:attribute name="ref" value="flood-water-marks-${river_id}"/></flood-water-marks>
                <water-levels><dc:attribute name="ref" value="water-levels-${river_id}"/></water-levels>
                <extra-longitudinal-sections><dc:attribute name="ref" value="extra-longitudinal-sections-${river_id}"/></extra-longitudinal-sections>
              </longitudinal-section>
              <dc:macro name="longitudinal_section-recommended">
                <annotation>
                          <dc:attribute name="factory" value="annotations"/>
                          <dc:attribute name="ids" value="${river_id}"/>
                </annotation>
              </dc:macro>
          </dc:if>
          <dc:if test="dc:contains($artifact-outs, 'floodmap')">
              <floodmap>
              <dc:choose>
                  <dc:when test="dc:contains($parameters, 'recommended')">
                    <dc:call-macro name="flood-map-recommended"/>
                  </dc:when>
                  <dc:when test="dc:contains($parameters, 'dem')">
                    <dc:call-macro name="flood-map-dem"/>
                  </dc:when>
                  <dc:otherwise>
                    <dc:call-macro name="flood-map-complete"/>
                  </dc:otherwise>
              </dc:choose>
              </floodmap>
              <dc:macro name="flood-map-recommended">
                <dc:comment>
                   FIXME: Following two macros look identical to me.
                </dc:comment>
                  <kilometrage>
                      <riveraxis>
                          <dc:attribute name="factory" value="riveraxis"/>
                          <dc:attribute name="ids" value="${river_id}"/>
                      </riveraxis>
                  </kilometrage>
                  <rastermap>
                      <background>
                          <dc:attribute name="factory" value="wmsbackground"/>
                          <dc:attribute name="ids" value="${river_id}"/>
                      </background>
                  </rastermap>
              </dc:macro>
              <dc:macro name="flood-map-dem">
                <dems>
                  <dc:context>
                    <dc:statement>
                      SELECT id    AS dem_id,
                             lower AS dem_lower,
                             upper AS dem_upper
                      FROM dem WHERE river_id = ${river_id}
                    </dc:statement>
                    <dc:elements>
                        <dem>
                          <dc:attribute name="factory" value="demfactory"/>
                          <dc:attribute name="ids" value="${dem_id}"/>
                          <dc:attribute name="description" value="${dem_lower}-${dem_upper}"/>
                        </dem>
                    </dc:elements>
                  </dc:context>
                </dems>
              </dc:macro>
              <dc:macro name="flood-map-complete">
                  <kilometrage>
                      <riveraxis>
                          <dc:attribute name="factory" value="riveraxis"/>
                          <dc:attribute name="ids" value="${river_id}"/>
                      </riveraxis>
                  </kilometrage>
                  <rastermap>
                      <background>
                          <dc:attribute name="factory" value="wmsbackground"/>
                          <dc:attribute name="ids" value="${river_id}"/>
                      </background>
                  </rastermap>
                  <dc:call-macro name="flood-map-dem"/>
              </dc:macro>
          </dc:if>
        </river>
      </dc:elements>
    </dc:context>
  </dc:macro>

  <dc:choose>
    <dc:comment>
      User specific part
      ------------------
    </dc:comment>
    <dc:when test="dc:contains($parameters, 'user-id')">
      <old_calculations>
        <dc:context connection="user">
          <dc:statement>SELECT u.id AS user_id, c.id AS collection_id, c.name as collection_name
                        FROM collections c JOIN users u ON c.user_id = u.id
                        WHERE u.gid = CAST(${user-id} AS uuid)
                        ORDER BY c.creation DESC
          </dc:statement>
          <dc:elements>
            <dc:context>
              <dc:statement>SELECT id AS a_id, state AS a_state, gid AS a_gid, creation AS a_creation
                            FROM   master_artifacts m
                            WHERE  collection_id = ${collection_id} AND gid &lt;&gt; CAST(${artifact-id} AS uuid)
                                   AND EXISTS (
                                      SELECT id FROM artifact_data WHERE artifact_id = m.id AND k = 'river' AND v = ${river})
              </dc:statement>
              <dc:elements>
                <dc:choose>


                  <dc:comment>
                    Import longitudinal sections only if the ${artifact-out} is defined as 'longitudinal_section'
                    ---------------------------------------------------------------------------------------------
                  </dc:comment>
                  <dc:when test="dc:contains($artifact-outs, 'longitudinal_section')">
                    <dc:context>
                      <dc:statement>SELECT id AS out_id FROM outs WHERE artifact_id = ${a_id} AND name = 'longitudinal_section'
                      </dc:statement>
                      <dc:elements>
                        <dc:context>
                          <dc:statement>SELECT name AS facet_name, num as facet_num, description AS facet_description
                                        FROM facets WHERE out_id = ${out_id} ORDER BY num ASC, name DESC
                          </dc:statement>
                          <longitudinal_section_columns>
                              <dc:attribute name="description" value="${river} ${a_creation}"/>
                              <dc:elements>
                                <dc:element name="${facet_name}">
                                  <dc:attribute name="description" value="${facet_description}"/>
                                  <dc:attribute name="ids" value="${facet_num}"/>
                                  <dc:attribute name="factory" value="winfo"/>
                                  <dc:attribute name="artifact-id" value="${a_gid}"/>
                                  <dc:attribute name="out" value="longitudinal_section"/>
                                </dc:element>
                              </dc:elements>
                          </longitudinal_section_columns>
                        </dc:context>
                      </dc:elements>
                    </dc:context>
                  </dc:when>
                  <dc:comment>
                    Import of longitudinal sections finished
                  </dc:comment>


                  <dc:comment>
                    Import Waterlevels only if the ${artifact-out} is defined as 'waterlevels'
                    --------------------------------------------------------------------------
                  </dc:comment>
                  <dc:when test="dc:contains($artifact-outs, 'waterlevels')">
                    <dc:context>
                      <dc:statement>SELECT id AS out_id FROM outs WHERE artifact_id = ${a_id} AND name = 'longitudinal_section'
                      </dc:statement>
                      <dc:elements>
                        <dc:context>
                          <dc:statement>SELECT name AS facet_name, num as facet_num, description AS facet_description
                                        FROM facets WHERE out_id = ${out_id} and name = 'longitudinal_section.w' ORDER BY num ASC, name DESC
                          </dc:statement>
                          <waterlevels>
                            <dc:attribute name="description" value="${river} ${a_creation} ${collection_name}"/>
                            <dc:elements>
                              <dc:element name="${facet_name}">
                                <dc:attribute name="description" value="${facet_description}"/>
                                <dc:attribute name="ids" value="${facet_num}"/>
                                <dc:attribute name="factory" value="winfo"/>
                                <dc:attribute name="artifact-id" value="${a_gid}"/>
                                <dc:attribute name="out" value="longitudinal_section"/>
                              </dc:element>
                            </dc:elements>
                          </waterlevels>
                        </dc:context>
                      </dc:elements>
                    </dc:context>
                  </dc:when>
                  <dc:comment>
                    Import of waterlevels finished
                  </dc:comment>

                </dc:choose>
              </dc:elements>
            </dc:context>
          </dc:elements>
        </dc:context>
      </old_calculations>


      <dc:comment>
        Include System specific part when 'load-system' is in parameters.
        -----------------------------------------------------------------
      </dc:comment>
      <dc:choose>
        <dc:when test="dc:contains($parameters,'load-system')">
          <dc:call-macro name="load-system"/>
        </dc:when>
      </dc:choose>
    </dc:when>


    <dc:comment>
      Include System specific part only if no user ID is given.
      ---------------------------------------------------------
    </dc:comment>
    <dc:otherwise>
        <dc:call-macro name="load-system"/>
    </dc:otherwise>
  </dc:choose>
</datacage>
</dc:template>

http://dive4elements.wald.intevation.org