Mercurial > dive4elements > river
graph
- Use enums to dispatch computeFeed() and computeAdvance().2011-06-16, by Ingo Weinzierl
- Added two more compute() methods to ComputeCallback to distinguish between different phases of the artifact.2011-06-16, by Ingo Weinzierl
- Moved Waterlevel state into the correct package.2011-06-16, by Ingo Weinzierl
- Added a compute() method to WINFOArtifact which acts as a dispatcher for different computations. It triggers a calculation based on ComputeCallbacks that are generated by the current states.2011-06-16, by Ingo Weinzierl
- Merged with trunk and introduced hashing of computed values.2011-06-15, by Ingo Weinzierl
- Added a parameter 'wq_free' that determines that mode of calculation 1 (specifies if the calculation is bound to a gauge or not).2011-06-17, by Ingo Weinzierl
- DischargeLongitudinalSectionCurve will have corrected W facets now.2011-06-17, by Ingo Weinzierl
- DistanceInfoService: Got rid of namespace in result document.2011-06-14, by Sascha L. Teichmann
- #77 The curves in a duration chart will have names now.2011-06-14, by Ingo Weinzierl
- The min/max W/Q ranges in the panel for calculation4 are written into the DESCRIBE.2011-06-14, by Ingo Weinzierl
- Write top 'Oberkante' and bottom 'Unterkante' to out going XML if they exist.2011-06-14, by Sascha L. Teichmann
- The state that is used to enter locations writes the river's range into the DESCRIBE now.2011-06-14, by Ingo Weinzierl
- Added error reporting to 'Wasserspiegellage' calculation.2011-06-10, by Sascha L. Teichmann
- Added error reporting to 'Abflusskurve' calculation.2011-06-10, by Sascha L. Teichmann
- Added error reporting to 'Dauerzahlen' calculation.2011-06-10, by Sascha L. Teichmann
- Added methods to remove NaN values.2011-06-10, by Sascha L. Teichmann
- Added calculation base class to collect the problems during the calculations. Adjusted calculation 4 to use the mechanism.2011-06-10, by Sascha L. Teichmann
- Changed the zoom process - the values in the chart request document are percentual values that apply to every axis.2011-06-09, by Ingo Weinzierl
- Corrected axes/datasets mappings.2011-06-09, by Ingo Weinzierl
- Berechnung 4: Determine the gauges by their station position. This hopefully fixes segment assignment problems.2011-06-08, by Sascha L. Teichmann
- Berechnung 4: Added more debug output2011-06-08, by Sascha L. Teichmann
- #103 PART 1: The numbers which are written into the static DESCRIBE part are i18n formatted now.2011-06-08, by Ingo Weinzierl
- #93 Changed the name of calculation type 4.2011-06-08, by Ingo Weinzierl
- Made the chart range determination more robust against NaN values.2011-06-08, by Ingo Weinzierl
- Set the second y axis to axis position 1 (starts at 0).2011-06-08, by Ingo Weinzierl
- s@m³/s@m\\u00b3/s@2011-06-08, by Sascha L. Teichmann
- s@m³/s@m\u00b3/s@2011-06-08, by Sascha L. Teichmann
- Only generate an axis element if a axis really exists.2011-06-08, by Sascha L. Teichmann
- BackJumpCorrector: Simpified array swapping.2011-06-07, by Sascha L. Teichmann
- Use java.util.List instead of java.util.Vector. Removed superfluous imports.2011-06-07, by Sascha L. Teichmann
- code clean up in states2011-06-07, by Sascha L. Teichmann
- The ChartInfoGenerator appends axes range information to the document now.2011-06-07, by Ingo Weinzierl
- If Artifact.feed() fails do not store invalid values in database.2011-06-07, by Sascha L. Teichmann
- Removed asymmetrical "- 1" from width calculation.2011-06-06, by Sascha L. Teichmann
- Berechnung 4: Fixed problem when more than one value per segment are given.2011-06-05, by Sascha L. Teichmann
- Refactored version of "Berechnung 4"2011-06-05, by Sascha L. Teichmann
- #90 Removed margins between data area border and curves.2011-06-03, by Ingo Weinzierl
- Refactored the chart creation in the ChartInfoGenerators. Now, every chart is created by the XYChartGenerator again.2011-06-03, by Ingo Weinzierl
- Charts are zoomed to a specified view if the attribute document for the chart creation contains an x and/or y range.2011-06-03, by Ingo Weinzierl
- Set collection ttl to 6 hours.2011-06-02, by Sascha L. Teichmann
- Added parser for segments2011-06-01, by Sascha L. Teichmann
- Fix crashes in back jump correction.2011-06-01, by Sascha L. Teichmann
- The matrix that is used to transform chart image coordinates into chart coordinates supports inverted x-axis now.2011-06-01, by Ingo Weinzierl
- Introduced a new output generators for creating chart info documents.2011-06-01, by Ingo Weinzierl
- Added support for the 'type' parameter of the collection's out() operation.2011-05-31, by Ingo Weinzierl
- Use an explicit reference km for interpolation now.2011-05-31, by Sascha L. Teichmann
- Introduce a cache for the distance-info service2011-05-30, by Sascha L. Teichmann
- flys/issue82: Only successful interpolations are named.2011-05-30, by Sascha L. Teichmann
- Re-eanbled the calculation of the backjump correction.2011-05-27, by Sascha L. Teichmann
- Removed XML debug statement.2011-05-27, by Ingo Weinzierl
- Moved the code part that skips themes to a better place. This let us paint empty charts with no themes at all.2011-05-27, by Ingo Weinzierl
- We will no longer put deactivated themes into the chart.2011-05-27, by Ingo Weinzierl
- Fixed the process of creating and storing the attribute of a collection.2011-05-27, by Ingo Weinzierl
- Make "Berechnungsart 4" work independent of flow direction. Commented out back jump correction temporarily.2011-05-26, by Sascha L. Teichmann
- Generate fields for w/q input depend on flow direction.2011-05-26, by Sascha L. Teichmann
- Take the flow direction into account.2011-05-26, by Sascha L. Teichmann
- Round exploded values to a precision of 1e-6.2011-05-26, by Sascha L. Teichmann
- WST value table: Qs are now stored in ranges for each column.2011-05-25, by Sascha L. Teichmann
- First part of storing qs in ranges2011-05-24, by Sascha L. Teichmann
- Small bugfixes in the WQ selection state.2011-05-24, by Ingo Weinzierl
- ISSUE-40 (part I/II) Write values that the user had former selected / inserted into DESCRIBE document to preselect such data in the UI.2011-05-24, by Ingo Weinzierl
- Removed needless imports.2011-05-24, by Ingo Weinzierl
- ISSUE-85 (part III/III) Use the given kilometer values for the waterlevel computation.2011-05-24, by Ingo Weinzierl
- ISSUE-85 (part I/III) Added further fields for the location/range state.2011-05-24, by Ingo Weinzierl
- Moved WST value table cache key to a separate class.2011-05-24, by Sascha L. Teichmann
- Introduce model to store q values of WST columns efficiently.2011-05-23, by Sascha L. Teichmann
- ISSUE-62 (part I/II) States are no longer filled with data - if a state needs user input, it needs to query the owner artifact.2011-05-23, by Ingo Weinzierl
- Added a method to dump the artifacts state/data.2011-05-23, by Ingo Weinzierl
- flys/issue84: Forget to select wst kind.2011-05-23, by Sascha L. Teichmann
- fix for flys/issue81: km weights were swapped2011-05-20, by Sascha L. Teichmann
- Tagged release 2.3.1 of flys-artifacts.2011-05-20, by Ingo Weinzierl
- Prepared Changes for the upcoming release.2011-05-20, by Ingo Weinzierl
- Tagged RELEASE 2.4 of flys-client.2011-06-28, by Ingo Weinzierl
- #182 Initial WQ mode in adapted wq panel is now Q.2011-06-27, by Ingo Weinzierl
- Prepared Changes for the upcoming release.2011-06-27, by Ingo Weinzierl
- Removed trailing whitespace.2011-06-26, by Sascha L. Teichmann
- Removed superfluous imports.2011-06-26, by Sascha L. Teichmann
- #165 Set the max length of project names to 50 characters.2011-06-24, by Ingo Weinzierl
- Zoom-to-max-extent will zoom to the initial chart range now (without zoom values given).2011-06-24, by Ingo Weinzierl
- #21 Newly created projects cannot be opened twice.2011-06-24, by Ingo Weinzierl
- #170 Changed the DOM manipulation while zoom and drag operation.2011-06-23, by Ingo Weinzierl
- Prepare for AT export.2011-06-23, by Sascha L. Teichmann
- Removed the formatter for project names in the project list.2011-06-23, by Ingo Weinzierl
- Escape project's names in the project list.2011-06-23, by Ingo Weinzierl
- #165 (part 1) Added tooltips and table headers in the project list.2011-06-23, by Ingo Weinzierl
- Improved the exception handling.2011-06-23, by Ingo Weinzierl
- First version of error reports.2011-06-23, by Sascha L. Teichmann
- Stub for report service.2011-06-22, by Sascha L. Teichmann
- The adapted WQ panel now displays warnings if no information are present to validate user input.2011-06-22, by Ingo Weinzierl
- Register newly created CollectionViews at FLYSWorkspace to avoid an inconsistent view.2011-06-22, by Ingo Weinzierl
- Open projects are removed from screen if the user deletes them (via project list).2011-06-22, by Ingo Weinzierl
- Implemented the RPC stubs to set the TTL and name of a collection and to delete an existing collection.2011-06-22, by Ingo Weinzierl
- Added stubs to set the name and ttl of a collection and to delete a collection.2011-06-22, by Ingo Weinzierl
- Improved the project list - listeners are notified after setting the name and ttl of a project.2011-06-22, by Ingo Weinzierl
- Adapted a german string in the WQ panel.2011-06-22, by Ingo Weinzierl
- #104 The WQ panel now display the selected wq mode.2011-06-22, by Ingo Weinzierl
- Initialize the combobox in the SelectProvider correctly.2011-06-21, by Ingo Weinzierl
- #156 Do not display report modes as tabs in the project view.2011-06-21, by Ingo Weinzierl
- The comboboxes to select the calculation mode are no longer editable.2011-06-21, by Ingo Weinzierl
- Restore the size of project windows if they are brought up to front.2011-06-21, by Ingo Weinzierl
- DoubleArrayPanel takes care on empty array fields when adding new double values. This avoids displaying 'null' values.2011-06-21, by Ingo Weinzierl
- Filter reports and dispatch them to updateReports().2011-06-21, by Sascha L. Teichmann
- #132 Set the initial mode of the location/distance panel to 'distance'.2011-06-21, by Ingo Weinzierl
- The project list displays the favorite state of a collection now. A gold star means, that a collection is a owner's favorite project and will never die. A silver star means, that the project is a common project.2011-06-21, by Ingo Weinzierl
- Set project list update interval to 5 minutes.2011-06-21, by Sascha L. Teichmann
- #22 Introduced a polling mechanism to refresh the projects of a user in the project list.2011-06-21, by Ingo Weinzierl
- Added i18n strings for each calculation report output.2011-06-21, by Ingo Weinzierl
- Forget to commit changelog2011-06-20, by Sascha L. Teichmann
- Added dummy report panel.2011-06-20, by Sascha L. Teichmann
- Removed more expensive XPath.2011-06-20, by Sascha L. Teichmann
- #140, #122: Splitted the WQD table in the WQInputPanel into two tables: a table for QD values and a table for W values - only the QD table is selectable.2011-06-20, by Ingo Weinzierl
- #140 Code cleanup in WQ table.2011-06-17, by Ingo Weinzierl
- #118 Added 'wq_free' parameter to feed document even if single value mode is selected.2011-06-17, by Ingo Weinzierl
- #118 Added a further radio button to select 'Q at Gauge' to the WQ panel.2011-06-17, by Ingo Weinzierl
- Added 'index' and 'description' of a facet to the collection's attribute document. The ChartThemePanel is now working again.2011-06-17, by Ingo Weinzierl
- The description of a facet is now displayed in the ChartThemePanel.2011-06-17, by Ingo Weinzierl
- Alloc TreeNode arrays with the right size because its known.2011-06-16, by Sascha L. Teichmann
- The DoubleArrayPanel is more tolerant towards entered whitespaces.2011-06-15, by Ingo Weinzierl
- Avoid GWT throwing warnings if no 'old' items exist for the parameter list.2011-06-15, by Ingo Weinzierl
- #117 Improved double value parsing in DoubleArrayPanel and DoubleRangePanel.2011-06-15, by Ingo Weinzierl
- #88 Modified strings in the location/distance panel.2011-06-14, by Ingo Weinzierl
- DistanceInfoService: Got rid of namespace. Use DOM instead of XPath.2011-06-14, by Sascha L. Teichmann
- Bring Oberkante and Unterkante into UI.2011-06-14, by Sascha L. Teichmann
- Loop through 'Unterkante' 'Oberkante' from service.2011-06-14, by Sascha L. Teichmann
- Adjusted a german error message.2011-06-14, by Ingo Weinzierl
- Introduced a client side input validation for the adapted WQ panel.2011-06-14, by Ingo Weinzierl
- Introduced a client side validation for the WQ panel.2011-06-14, by Ingo Weinzierl
- Introduced an input validation for the location panels.2011-06-14, by Ingo Weinzierl
- Introduced a client side validation before new user data are sent to the server - the range/location panel already implements this validation.2011-06-09, by Ingo Weinzierl
- Parse the min/max axes ranges for the ChartInfo and modified the zoom and pan actions to match the current server implementation.2011-06-09, by Ingo Weinzierl
- #139 Fixed NPE while initialising user defined values in the adapted wq panel.2011-06-09, by Ingo Weinzierl
- Added units to the selected W or Q values in the static UI part.2011-06-08, by Ingo Weinzierl
- #43 Modified an english warning text.2011-06-08, by Ingo Weinzierl
- #21 There might be just a single window for each project now. Users can't open a project twice.2011-06-08, by Ingo Weinzierl
- Avoid NPE while parsing axes in ChartInfoService.2011-06-08, by Ingo Weinzierl
- Don't crash if there is no transformer.2011-06-08, by Sascha L. Teichmann
- Added a dirty hack to display project names shorter than 30 characters.2011-06-08, by Ingo Weinzierl
- The MouseOut event will now finish a current pan operation.2011-06-07, by Ingo Weinzierl
- Adapted the ChartInfoService to return more information about charts than before. In addition, the PanControl is added to the chart toolbar.2011-06-07, by Ingo Weinzierl
- Added a PanControl to pan charts.2011-06-07, by Ingo Weinzierl
- Adjusted the return values of the CSVExportService, so that GWT can handle those values better.2011-06-07, by Ingo Weinzierl
- Use the same code to create the attribute document for the chart creation in ChartOutputService and ChartInfoService.2011-06-07, by Ingo Weinzierl
- Repaired broken zoom-out control.2011-06-06, by Ingo Weinzierl
- #131 Repaired a broken XPath expression for the chart attributes.2011-06-06, by Ingo Weinzierl
- Improved the zoombox control: cancel the zoom operation if the mouse pointer leaves the chart area.2011-06-06, by Ingo Weinzierl
- Added missing icon for the zoom-out control.2011-06-03, by Ingo Weinzierl
- Added a zoom-out control to the chart toolbar which zooms 10% of the current ranges out.2011-06-03, by Ingo Weinzierl
- Added a control to reset the zoom of a chart. In addition, the zoom buttons are displayed as ImgButtons now.2011-06-03, by Ingo Weinzierl
- Append the x and y ranges determined after zooming with the ZoomboxControl to the attribute document used for the chart creation.2011-06-03, by Ingo Weinzierl
- Added the ChartOutputTab as ZoomHandler for the ZoomboxControl - no zooming is done yet.2011-06-01, by Ingo Weinzierl
- Implemented a zoombox control and added it to the chart toolbar.2011-06-01, by Ingo Weinzierl
- Improved the layout of the mouse position panel.2011-06-01, by Ingo Weinzierl
- Adapted the MousePositionPanel to use the Transform2D object for computing the chart coordinates from image coordinates.2011-06-01, by Ingo Weinzierl
- The collection object in the CollectionView is now accessible via getter method.2011-06-01, by Ingo Weinzierl
- Removed a debug statement.2011-06-01, by Ingo Weinzierl
- Added a chart info service to fetch the info document for a specific chart from artifact server.2011-06-01, by Ingo Weinzierl
- Added a first implementation of a MousePositionPanel - work is not finished yet.2011-05-27, by Ingo Weinzierl
- Moved the toolbar stuff of the chart panel into an own class.2011-05-27, by Ingo Weinzierl
- Replaced buttons displayed as labels with real buttons.2011-05-27, by Ingo Weinzierl
- The chart in the ChartOutputTab is refreshed when there occur any changes in the chart theme panel.2011-05-27, by Ingo Weinzierl
- Connected the CollectionAttributeService with the artifact server - Collection modifications will now be stored in the artifact databae.2011-05-27, by Ingo Weinzierl
- Changes in the chart theme panel will now have an effect on the themes stored at the collection.2011-05-27, by Ingo Weinzierl
- Connected the actions in the navigation panel with the theme list in the ChartThemePanel - themes can be moved now.2011-05-26, by Ingo Weinzierl
- Added a navigation panel to the bottom of the theme control panel to move themes up/down (function not implemented yet).2011-05-25, by Ingo Weinzierl
- Added a service stub to update/modify the attribute of a collection (used in the theme control panel).2011-05-25, by Ingo Weinzierl
- Removed a bug in the DefaultTheme that prevented setting the artifact of a Theme correctly.2011-05-25, by Ingo Weinzierl
- The theme list information stored in the attribute of a collection is read and added in form of Themes and ThemeLists to the Collection.2011-05-25, by Ingo Weinzierl
- Implemented the first step of a theme control panel for charts.2011-05-25, by Ingo Weinzierl
- Removed needless imports.2011-05-25, by Ingo Weinzierl
- Added a new package 'chart' that should be the place where chart relevant classes should be stored. Moved ChartOutputTab into that package.2011-05-25, by Ingo Weinzierl
- Bugfix in the range/location panel - avoid NullPointerExceptions in getData().2011-05-25, by Ingo Weinzierl
- ISSUE-90 & ISSUE-40 (part II/II) Former selected values are preselected after back jumps.2011-05-24, by Ingo Weinzierl
- Added i18n error messages.2011-05-24, by Ingo Weinzierl
- Take care on empty Data objects while initializing default values in Location/distance panel.2011-05-24, by Ingo Weinzierl
- ISSUE-85 (part II/III) Repaired broken location/range panel.2011-05-24, by Ingo Weinzierl
- The default values/labels for Data objects are read from DESCRIBE document.2011-05-24, by Ingo Weinzierl
- Enhanced the Data object to save default values/labels.2011-05-24, by Ingo Weinzierl
- Added a mechanism to listen to changes relating to output modes of collections and artifacts. Solves a part of ISSUE-62.2011-05-23, by Ingo Weinzierl
- Reverted commit that changed the default port of the artifact server.2011-05-20, by Ingo Weinzierl
- Added missing i18n strings for duration curve export.2011-05-20, by Ingo Weinzierl
- Tagged release 2.3.1 of flys-client.2011-05-20, by Ingo Weinzierl
- Prepared Changes for release 2.3.12011-05-20, by Ingo Weinzierl
- merged flys-backend/2.3.12012-09-28, by Thomas Arendsen Hein
- Tagged release 2.3.1 of flys-backend.2011-05-20, by Ingo Weinzierl
- Prepared Changes for the upcoming release.2011-05-13, by Ingo Weinzierl
- Schema: Added a column which tells if a river counts its km up or downwards.2011-05-11, by Sascha L. Teichmann
- Fixed flys/issue11 and flys51.2011-05-10, by Sascha L. Teichmann
- Importer: Added unsharp lookup to avoid numerical problems.2011-05-09, by Sascha L. Teichmann
- Importer: Fix silly bug and set Hibernate session flushing back to auto.2011-05-09, by Sascha L. Teichmann
- Importer: Change caching strategy not to cause OOM any more.2011-05-09, by Sascha L. Teichmann
- Importer: Use BigDecimals in hashing to prevent numerical problems. Cache ranges globally, too.2011-05-08, by Sascha L. Teichmann
- Importer: Only accept main value types 'Q', 'W', 'D' and 'T' by default.2011-05-08, by Sascha L. Teichmann
- Importer: Cache the discharge table values, too.2011-05-08, by Sascha L. Teichmann
- Importer: centralized caching2011-05-08, by Sascha L. Teichmann
- Schema: Dropped constraint which forces discharge tables to have a unique time interval for a given gauge and kind.2011-05-08, by Sascha L. Teichmann
- Importer: make column names in WST files unique by appending (1), (2) and so on in case of collision2011-05-08, by Sascha L. Teichmann
- Importer: Import the "HW-Schutzanlagen", too.2011-05-06, by Sascha L. Teichmann
- Importer: Make import of historical discharge tables work.2011-05-06, by Sascha L. Teichmann
- Importer: parse historical discharge tables, too. TODO: store them in database.2011-05-05, by Sascha L. Teichmann
- Importer: Prefix "Zusätzliche Längsschnitte" with "Zus.Längsschnitte" in description.2011-05-05, by Sascha L. Teichmann
- Import "Hochwasser-Marken", too.2011-05-05, by Sascha L. Teichmann
- Importer: Ignore lines that contain km positions which were found before in the same WST file.2011-05-05, by Sascha L. Teichmann
- River got a new method that returns all gauges intersected by a given start and end point.2011-05-05, by Ingo Weinzierl
- Importer: forgot to fetch time interval peer2011-05-03, by Sascha L. Teichmann
- Importer: Attach a time interval to a discharge table if we find one during import.2011-05-03, by Sascha L. Teichmann
- Importer: Try to extract time ranges from at files.2011-05-03, by Sascha L. Teichmann
- Parse and store "amtliche Linien" wst files.2011-05-03, by Sascha L. Teichmann
- Importer: parse and store fixation wst files as well2011-05-03, by Sascha L. Teichmann
- Importer: Support parsing "zusaetzliche Laengsschnitte".2011-05-03, by Sascha L. Teichmann
- Fixed flys/issue192011-05-02, by Sascha L. Teichmann
- Introduced a 'scale' parameter in Gauge.determineMinMaxW().2011-05-02, by Ingo Weinzierl
- Removed superfluous import.2011-05-01, by Sascha L. Teichmann
- Implemented a WstColumnValue cache to speed up inserting WST files into database.2011-04-20, by Ingo Weinzierl
- Forgot to add db update to changelog2011-04-18, by Sascha L. Teichmann
- Added a view 'wst_value_table' which aggregates the data to build w/q value tables.2011-04-18, by Sascha L. Teichmann
- Add forgotten one to many relation Wst -> WstColumn.2011-04-18, by Sascha L. Teichmann
- Import of q ranges of wst files was totally broken.2011-04-18, by Sascha L. Teichmann
- Importer: Forgot kind parameter in peer fetching query.2011-04-18, by Sascha L. Teichmann
- Added a new method to determine the selected gauge of a river based on a start and end point.2011-04-18, by Ingo Weinzierl
- Added 'position' column to wst_columns to allow order them by there column position in the original wst file.2011-04-15, by Sascha L. Teichmann
- Forget ',' in schema.2011-04-15, by Sascha L. Teichmann
- Fixed index problem when an empty list is returned.2011-04-15, by Sascha L. Teichmann
- Added methods to retrieve the min and max W and Q values of a Wst and Gauge.2011-04-15, by Ingo Weinzierl
- Added new column 'kind' in discharge tables and wst to distinguish between different types.2011-04-15, by Sascha L. Teichmann
- Moved the SessionHolder from flys-artifacts to flys-backend.2011-04-15, by Ingo Weinzierl
- Added a method to River that returns the min and max distance of the river.2011-04-14, by Ingo Weinzierl
- Removed trailing whitespace.2011-04-03, by Sascha L. Teichmann
- Tagged RELEASE 0.1 of FLYS backend.2011-03-30, by Ingo Weinzierl
- merged flys-artifacts/2.3.12012-09-28, by Thomas Arendsen Hein
- Tagged release 2.3.1 of flys-artifacts.2011-05-20, by Ingo Weinzierl
- Notes to Release V 2.3.12011-05-20, by Hans Plum
- Increment kms array size by one to take the end of range, too.2011-05-19, by Sascha L. Teichmann
- Use unsharp km lookup (epsilon = 0.0001).2011-05-19, by Sascha L. Teichmann
- ISSUE-66 Fixed broken english subtitle template for longitudinal section charts.2011-05-19, by Ingo Weinzierl
- The curve of a computed discharge curve has a human readable text now.2011-05-19, by Ingo Weinzierl
- Reintroduced titles for the "W for unausgeglichene Abfluesse".2011-05-19, by Sascha L. Teichmann
- Added names for discharge curves (at gauges).2011-05-19, by Ingo Weinzierl
- Removed dead code2011-05-19, by Sascha L. Teichmann
- use correct kms and step width now now2011-05-19, by Sascha L. Teichmann
- Use new logic to calculate "W für ungleichwertige Abfluesse". Not working yet.2011-05-18, by Sascha L. Teichmann
- Enabled the discharge longitudinal section to be exported as WST.2011-05-18, by Ingo Weinzierl
- flys/issue69: Connected calculation with the UI2011-05-18, by Sascha L. Teichmann
- W and Q curves in longitudinal section curves will now have names.2011-05-18, by Ingo Weinzierl
- WSTs will now have a header that contains the names of the Ws or Qs that had been defined for the computation.2011-05-18, by Ingo Weinzierl
- Implemented writer that creates WSTs and enabled the WaterlevelExporter to create those.2011-05-17, by Ingo Weinzierl
- Added a new class that supports formatters for different types of data.2011-05-17, by Ingo Weinzierl
- ISSUE-72 Repaired broken XPath expression in MainValuesService to extract start and end kilometer.2011-05-17, by Ingo Weinzierl
- Separated the WST table loading logic from the calculations.2011-05-17, by Sascha L. Teichmann
- Tagged RELEASE 2.32011-05-17, by Ingo Weinzierl
- Tagged release 2.3.1 of flys-client.2011-05-20, by Ingo Weinzierl
- Reverted src/main/java/de/intevation/flys/client/client/config.xml after unintentional change2011-05-20, by Hans Plum
- NEWS to Release V 2.3.12011-05-20, by Hans Plum
- Prepared Changes for the upcoming RELEASE 2.3.12011-05-19, by Ingo Weinzierl
- ISSUE-35 The project view has a maximize button now.2011-05-19, by Ingo Weinzierl
- ISSUE-43 Adapted the english warning the is displayed before a language switch takes place.2011-05-19, by Ingo Weinzierl
- Added missing i18n strings for computed discharge curve exports.2011-05-19, by Ingo Weinzierl
- Added i18n strings for exports.2011-05-18, by Ingo Weinzierl
- Adjusted the width of an export button and added a tooltip to distinguish different exports.2011-05-17, by Ingo Weinzierl
- Adjusted a method signature of ClientProtocolUtils that has been changed in the last revision.2011-05-17, by Ingo Weinzierl
- Tagged RELEASE 2.3 of flys-client.2011-05-17, by Ingo Weinzierl
- merged flys-artifacts/2.32012-09-28, by Thomas Arendsen Hein
- Tagged RELEASE 2.32011-05-17, by Ingo Weinzierl
- Added NEWS File for collecting enduser-sepcific information for releases2011-05-16, by Hans Plum
- First step to calculate "W fuer ungleichwertige Abfluesse" correctly. flys/issue552011-05-15, by Sascha L. Teichmann
- Fix step to fix issue69: Do the right calculation2011-05-15, by Sascha L. Teichmann
- Prepared Changes for the upcoming release 2.3.2011-05-13, by Ingo Weinzierl
- ISSUE-37 The river state wants to be rendered using a river_panel UI provider.2011-05-13, by Ingo Weinzierl
- Charts are generated using the size defined in the incoming request document.2011-05-12, by Ingo Weinzierl
- ISSUE-52 The longitudinal section charts will now always have the head of the river at the left side.2011-05-11, by Ingo Weinzierl
- MetaDataService: Make incoming XML symmetric to DistanceInfoService.2011-05-11, by Sascha L. Teichmann
- ISSUE-47 Adjusted the line color of W, Q and corrected W curves (temporarilly).2011-05-10, by Ingo Weinzierl
- Display gridlines in charts.2011-05-10, by Ingo Weinzierl
- ISSUE-53 Formatted number values of CSV exports.2011-05-10, by Ingo Weinzierl
- Implemented the input validation of WQ in the adapted WQ panel.2011-05-10, by Ingo Weinzierl
- The CSV exports will now have headers.2011-05-10, by Ingo Weinzierl
- Datacage: Added river parameter to meta data services.2011-05-10, by Sascha L. Teichmann
- Added subtitles to the available charts.2011-05-10, by Ingo Weinzierl
- Added a method to Resources that returns translated compound messages.2011-05-10, by Ingo Weinzierl
- Improved the OutGenerator interface to set a master artifact for the out generation.2011-05-10, by Ingo Weinzierl
- Enabled the WINFO artifact to choose between W and Q mode in the adapted wq panel of the discharge longitudinal section computation.2011-05-10, by Ingo Weinzierl
- Datacage service: Cleanup served XML document.2011-05-09, by Sascha L. Teichmann
- Datacage: Added forgotten columns of fixation WST to datcage template.2011-05-09, by Sascha L. Teichmann
- Enabled i18n support for charts.2011-05-09, by Ingo Weinzierl
- Added a CSV exporter for the discharge longitudinal section computation.2011-05-09, by Ingo Weinzierl
- Back jump correction should work now for both flow directions.2011-05-07, by Sascha L. Teichmann
- Added data cage configuration for 'Längsschnitt'.2011-05-06, by Sascha L. Teichmann
- Add data cage configuration for "Abflusskurve [NN + m]".2011-05-06, by Sascha L. Teichmann
- Added an OutGenerator to create discharge longitudinal section charts.2011-05-06, by Ingo Weinzierl
- Implemented methods to retrieve and compute the data used to create discharge longitudinal sections.2011-05-06, by Ingo Weinzierl
- Small bugfix in the adapted WQ state and further i18n strings.2011-05-05, by Ingo Weinzierl
- Changed the y-axis title of the computed discharge curve.2011-05-05, by Ingo Weinzierl
- Improved the transition model and added states to enable the 'discharge longitudinal section' computation - NOTE: the work in this computation has not finished yet.2011-05-05, by Ingo Weinzierl
- Use a default step width (100m) between two kilometers if no width is given.2011-05-05, by Ingo Weinzierl
- Fixed a potential NullPointerException while creating a longitudinal section chart.2011-05-05, by Ingo Weinzierl
- fix flys/issue302011-05-04, by Sascha L. Teichmann
- 'berechnete Abflusskurve': generate ws from qs2011-05-04, by Sascha L. Teichmann
- Filled the discharge curve exporter (CSV) with code - now, it generates a CSV export with the computed discharge curve data.2011-05-04, by Ingo Weinzierl
- Enabled the WINFO artifact to compute the data for discharge curves (computed) - ComputedDischargeCurveGenerator uses those values now to create the chart.2011-05-04, by Ingo Weinzierl
- Improved the transition model and added classes to enable the WINFO artifact to create computed discharge curves - NOTE: each of the new classes is just a stub.2011-05-04, by Ingo Weinzierl
- Added an exporter to export the computed data of a duration curve.2011-05-03, by Ingo Weinzierl
- Modified a confusing debug statement.2011-05-03, by Ingo Weinzierl
- Added an exporter (OutGenerator) for waterlevels which currently supports CSV exports.2011-05-03, by Ingo Weinzierl
- Introduced an export output target on collection level that enables collections to be exported.2011-05-03, by Ingo Weinzierl
- I18N Bugfix.2011-05-03, by Ingo Weinzierl
- Added i18n strings for the location selection.2011-05-03, by Ingo Weinzierl
- Enabled the WINFO artifact to create duration curves - new OutGenerator, added methods for data computation.2011-05-03, by Ingo Weinzierl
- visualize-transitions.xsl: State quoting was done wrong.2011-05-03, by Sascha L. Teichmann
- Enhanced the transition model to reach a state that creates duration curves.2011-05-02, by Ingo Weinzierl
- Flush/persist cache at end of program.2011-05-02, by Sascha L. Teichmann
- The DischargeCurveGenerator uses public methods of FLYSArtifact to retrieve all necessary information of the current settings.2011-05-02, by Ingo Weinzierl
- Moved expensive allocation of result arrays out of km loop.2011-05-02, by Sascha L. Teichmann
- Enabled the FLYSArtifact to handle an array of inserted WQ values (without given ranges).2011-05-02, by Ingo Weinzierl
- Repaired DischargeTables.getQForW()2011-05-02, by Sascha L. Teichmann
- Enabled the server to handle longitudinal section chart requests with inserted W data - Ws are transformed into Qs then.2011-05-02, by Ingo Weinzierl
- Removed an unused parameter from DischargeTables.getQForW().2011-05-02, by Ingo Weinzierl
- Ws and Qs of a longitudinal section chart are mapped to an own range axis now.2011-05-02, by Ingo Weinzierl
- Added caching support for the wst value tables.2011-05-01, by Sascha L. Teichmann
- Added ehcache support.2011-04-29, by Sascha L. Teichmann
- Added meta data service.2011-04-29, by Sascha L. Teichmann
- Added meta service stub. TODO: Add meta data builder.2011-04-29, by Sascha L. Teichmann
- Bugfix: Changed the datastructure of the ThemeList (inner class of FLYSArtifactCollection) to store the theme of a chart in an ordered list -> Q curves of longitudinal section charts are now drawn.2011-04-29, by Ingo Weinzierl
- Implemented the chart creation of a longitudinal section chart - W and Q facets.2011-04-29, by Ingo Weinzierl
- Improved the calculation of the step width of ranges.2011-04-29, by Ingo Weinzierl
- New method WQKms.size() to retrieve the number of elements in the data pool.2011-04-29, by Ingo Weinzierl
- WQKms model: Added a get() method which takes destination array as an argument.2011-04-29, by Sascha L. Teichmann
- Introduced GNU Trove to store WQKms values in a more performant data structure.2011-04-29, by Ingo Weinzierl
- Added the name of the facet to the parameterlist of OutGenerator.doOut().2011-04-29, by Ingo Weinzierl
- Added themes and mappings for the W and Q theme of a longitudinal section curve.2011-04-29, by Ingo Weinzierl
- Added necessary methods to start the computation of waterlevel data.2011-04-29, by Ingo Weinzierl
- Introduced a model class to store a set of triple data objects that consist of W, Q and Kms information.2011-04-29, by Ingo Weinzierl
- Bugfix: Removed endless loop and a bug while iterating over Hibernate results.2011-04-29, by Ingo Weinzierl
- Added an OutGenerator for creating longitudinal section curves.2011-04-28, by Ingo Weinzierl
- Bugfix: Added missing <output-generators> section to the global configuration.2011-04-28, by Ingo Weinzierl
- Added a further state that is reached if the waterlevel calculation mode has been chosen.2011-04-28, by Ingo Weinzierl
- Added a new Transition to compare values.2011-04-28, by Ingo Weinzierl
- Bugfixes: Adapted a broken method call of TransitionEngine.isStateReachable() and added the outputs of a current state to the DESCRIBE.2011-04-28, by Ingo Weinzierl
- Bugfix: Added the missing init() method to a Transition and call it in the TransitionFactory after a Transition has been created.2011-04-28, by Ingo Weinzierl
- Bugfix: The outputs of a Collection's attribute document are stored in an outputs node now instead of being stored toplevel in the document.2011-04-28, by Ingo Weinzierl
- Throw an illegal argument exception in LocationDistanceSelect.validate() and WQSelect.validate() if no data has been inserted so far.2011-04-28, by Ingo Weinzierl
- Added XSL transformation do create Graphviz digraph out of conf.xml2011-04-28, by Sascha L. Teichmann
- The OutGenerator gets the theme of a facet while output creation.2011-04-28, by Ingo Weinzierl
- Removed useless imports.2011-04-27, by Ingo Weinzierl
- Added an abstract OutGenerator that should be the base class for all generators which create charts.2011-04-27, by Ingo Weinzierl
- Improved the out() operation of a Collection - the OutGenerator gets to know about the facets and its theme.2011-04-27, by Ingo Weinzierl
- The Attributes of a collection are written into its DESCRIBE now.2011-04-26, by Ingo Weinzierl
- Initialized the facet2theme mappings configured in themes.xml and added a function to the ThemeFactory that retrieves a theme from FLYSContext based on its name.2011-04-26, by Ingo Weinzierl
- Corrected a silly c&p mistake.2011-04-22, by Sascha L. Teichmann
- Implementation of the "Ruecksprungkorrektur" to be done in "W fuer angepassten Abflusslaengschnitt".2011-04-22, by Sascha L. Teichmann
- Removed debug code that has been commited by accident.2011-04-21, by Ingo Weinzierl
- Added a first small theme configuration and code to read it.2011-04-21, by Ingo Weinzierl
- Implementation of interfaces and its default implementations and a factory to work with themes.2011-04-21, by Ingo Weinzierl
- Implementation of "Abflusskurve/Abflusstafel" calculation.2011-04-20, by Sascha L. Teichmann
- Added dependency to Apache Commons Math 2.2 (Apache License 2.0)2011-04-20, by Sascha L. Teichmann
- Discharge table: Fix problem when sorting by q (copied w instead of q).2011-04-20, by Sascha L. Teichmann
- Fixed broken HQL statement.2011-04-20, by Ingo Weinzierl
- Implemented the "Wasserstand/Wasserspiegellagen" calculation.2011-04-19, by Sascha L. Teichmann
- Discharge table: we need a getQForW() and not a getWForQ().2011-04-19, by Sascha L. Teichmann
- Discharge tables: Sorting of q values was done wrong.2011-04-19, by Sascha L. Teichmann
- The list of annotations returned by the AnnotationFactory is ordered by its range.2011-04-19, by Ingo Weinzierl
- Added a service that returns the MainValues of a Gauge based on a river name and a stationing.2011-04-19, by Ingo Weinzierl
- Added a factory that returns MainValues.2011-04-19, by Ingo Weinzierl
- Discharge table: Added static method getWForQ() to interpolate a w value for a given q value based on a given discharge table.2011-04-19, by Sascha L. Teichmann
- Discharge tables: Added convenience constructors/methods to ease the access to the master discharge table of a gauge.2011-04-19, by Sascha L. Teichmann
- Moved the query complexity of creating a w/q value table into view2011-04-18, by Sascha L. Teichmann
- Fetches w/q value tables from the backend.2011-04-18, by Sascha L. Teichmann
- Changed the error key that is written to the result document of the feed operation.2011-04-18, by Ingo Weinzierl
- The inserted river is validated in the feed operation().2011-04-18, by Ingo Weinzierl
- The calculation method is validated in the feed() operation.2011-04-18, by Ingo Weinzierl
- The inserted ranges (distance and WQ ranges) are validated in the feed() operation.2011-04-18, by Ingo Weinzierl
- Removed testing code that has been comitted by accident in the last revision.2011-04-18, by Ingo Weinzierl
- The getGauge() method of the FLYSArtifact returns the first gauge based on the given stationing now.2011-04-18, by Ingo Weinzierl
- The WQ state fills the DESCRIBE with default values for W and Q.2011-04-15, by Ingo Weinzierl
- Added a WstFactory to return Wst objects.2011-04-15, by Ingo Weinzierl
- FLYSArtifact provides methods to retrieve the real River, Gauge objects.2011-04-15, by Ingo Weinzierl
- Bugfix: repaired broken imports of the session holder.2011-04-15, by Ingo Weinzierl
- Removed the SessionHolder and adapted imports.2011-04-15, by Ingo Weinzierl
- Acquire/release sessions in services to avoid db connection leaks.2011-04-14, by Sascha L. Teichmann
- The location/distance state now writes default values into DESCRIBE.2011-04-14, by Ingo Weinzierl
- Added a new function to RiverFactory that retrieves a River object based on a given river name.2011-04-14, by Ingo Weinzierl
- Backend access: Static methods are using the SessionHolder, too.2011-04-14, by Sascha L. Teichmann
- Finalized the SessionCallContextListener and registered it as CallContext.Listener in the configuration.2011-04-14, by Ingo Weinzierl
- Bugfix: Call correct method to retrieve and initialize an instance of SessionFactoryProvider.2011-04-14, by Ingo Weinzierl
- Added a session holder to hold hibernate sessions.2011-04-14, by Sascha L. Teichmann
- Added an Implementation of CallContext.Listener to open/close Hibernate Sessions for each request.2011-04-14, by Ingo Weinzierl
- Modified the states' describe() method - related to the last commit.2011-04-14, by Ingo Weinzierl
- Removed the state to explicitly select a gauge.2011-04-14, by Ingo Weinzierl
- Bugfix: Repaired the dynamic UI part of the RiverSelect state in DESCRIBE.2011-04-13, by Ingo Weinzierl
- Write the name of an artifact into the DESCRIBE document.2011-04-12, by Ingo Weinzierl
- Bugfix: States are filled with data before they describe themself.2011-04-12, by Ingo Weinzierl
- Implemented a service that retrieves distance information for a specific river.2011-04-11, by Ingo Weinzierl
- The FLYSArtifactCollection overrides out() and uses OutGenerators to create output for this operation.2011-04-06, by Ingo Weinzierl
- Added a DischargeCurveGenerator that creates discharge curves.2011-04-06, by Ingo Weinzierl
- Changed the visibility of getData() method of FLYSArtifacts.2011-04-06, by Ingo Weinzierl
- Removed trailing whitespace.2011-04-03, by Sascha L. Teichmann
- Make project compilable again.2011-04-03, by Sascha L. Teichmann
- Added code to parse the configured OutGenerators in the global configuration and to save a map of such in the FLYSContext.2011-03-31, by Ingo Weinzierl
- Added an OutGenerator interface that might be used to generator collected outputs of a set of artifacts.2011-03-31, by Ingo Weinzierl
- Removed the Backend reference from FLYSArtifactCollection.2011-03-30, by Ingo Weinzierl
- Enhanced the output mode for discharge curves with three facets.2011-03-30, by Ingo Weinzierl
- Tagged RELEASE 0.1 of FLYS Artifacts.2011-03-30, by Ingo Weinzierl
- Tagged RELEASE 2.3 of flys-client.2011-05-17, by Ingo Weinzierl
- Added missing information for release2011-05-16, by Hans Plum
- Added NEWS File for collecting enduser-sepcific information for releases2011-05-16, by Hans Plum
- Prepared Changes for the upcoming release 2.3.2011-05-13, by Ingo Weinzierl
- Datacage: Better converter for incoming XML tree2011-05-13, by Sascha L. Teichmann
- ISSUE 61: Changed datacage button style.2011-05-12, by Raimund Renkert
- ISSUE 46: Removed the table header context menu.2011-05-12, by Raimund Renkert
- ISSUE 43: Changed i18n strings.2011-05-12, by Raimund Renkert
- Show rivers as links instead of a combobox.2011-05-12, by Raimund Renkert
- ISSUE-15 The charts in the chart panel are requested with the size of the parent panel.2011-05-12, by Ingo Weinzierl
- Enabled the client to request charts in different sizes.2011-05-12, by Ingo Weinzierl
- ISSUE-34 Limit the windows which are moved to the right lower corner to 10.2011-05-12, by Ingo Weinzierl
- Datacage: transport rpc result to ui.2011-05-11, by Sascha L. Teichmann
- Changed the height of the export panel.2011-05-11, by Ingo Weinzierl
- UI stub for data cage2011-05-11, by Sascha L. Teichmann
- ISSUE-56 Display download buttons to export the computed data.2011-05-11, by Ingo Weinzierl
- Added a service to export data from the artifact server.2011-05-11, by Ingo Weinzierl
- ISSUE 34: Move every new project window 20 px down and right.2011-05-11, by Raimund Renkert
- ISSUE 44: Moved the location/range and WQ input tables to the helper panel and2011-05-11, by Raimund Renkert
- Set the computation result panel width and height to 100%.2011-05-11, by Raimund Renkert
- Parse the facets of a Collection and distinguish between an ordinary OutputMode and an ExportMode (new).2011-05-11, by Ingo Weinzierl
- ISSUE-41 Moved the panel that shows the computation results right beside the parameterization - NOTE: issue is still open.2011-05-11, by Ingo Weinzierl
- ISSUE-57 Replaced wrong i18n function call.2011-05-11, by Ingo Weinzierl
- ISSUE-48 Added placeholder for the toolbar and the theme control in the chart output tab.2011-05-10, by Ingo Weinzierl
- ISSUE-38 Set the first value of a select box as default value.2011-05-10, by Ingo Weinzierl
- Added i18n error messages used in the adapted wq panel.2011-05-10, by Ingo Weinzierl
- Changed the empty table message for the WQ input table.2011-05-10, by Raimund Renkert
- Changed the empty table message for helper and data tables.2011-05-10, by Raimund Renkert
- Added stub for meta data service.2011-05-10, by Sascha L. Teichmann
- Fixed the location input. A range selection sets the correct location values2011-05-10, by Raimund Renkert
- Remove the data table on step back.2011-05-10, by Raimund Renkert
- Build a dynamic table for the CSV data.2011-05-10, by Raimund Renkert
- Fixed attributes/namespaces in the XML document that is used to fetch the CSV export of WINFO computations.2011-05-10, by Ingo Weinzierl
- Fixed a broken dependency in the maven pom file.2011-05-09, by Ingo Weinzierl
- Added table and service for calculation output to UI.2011-05-09, by Raimund Renkert
- Added radio buttons to choose between W/Q modes in the adapted WQ panel.2011-05-09, by Ingo Weinzierl
- Bugfix: the current locale string is used to fetch chart images now.2011-05-09, by Ingo Weinzierl
- Added a doubleclick listener to the project list to open a project.2011-05-09, by Ingo Weinzierl
- Removed superfluous imports.2011-05-09, by Sascha L. Teichmann
- Changed the wording when speaking about kilometer ranges.2011-05-09, by Ingo Weinzierl
- Enable or disable table rows depending on the WQ selection.2011-05-05, by Raimund Renkert
- Implemented handler for WQ value selection.2011-05-05, by Raimund Renkert
- Added table for WQ inputs.2011-05-05, by Raimund Renkert
- Implemented the createOld() of WQAdaptedInputPanel.2011-05-05, by Ingo Weinzierl
- The WQAdaptedInputPanel displays input fields for each gauge and returns the correct w/q values now.2011-05-05, by Ingo Weinzierl
- Added new WQ info service and data structures.2011-05-04, by Raimund Renkert
- Do not update the locations table if no data is cached.2011-05-04, by Raimund Renkert
- Added a stub implementation of a WQ panel for discharge longitudinal section computations.2011-05-04, by Ingo Weinzierl
- Fixed the single location input panel.2011-05-04, by Raimund Renkert
- Renamed non-computed discharge curve outputs.2011-05-04, by Ingo Weinzierl
- Added i18n strings for the computed discharge curve.2011-05-04, by Ingo Weinzierl
- Added new i18n strings for new output modes.2011-05-03, by Ingo Weinzierl
- Added new UI provider for single location selection.2011-05-03, by Raimund Renkert
- Cash the table data and rebuild the location table on distance selection.2011-05-02, by Raimund Renkert
- Introduced two further parameters in the WQ panel to determine the selection mode (range/single, w/q).2011-05-02, by Ingo Weinzierl
- Added location and distance tables.2011-05-02, by Raimund Renkert
- Bugfix: the WQ panel now returns the correct step width value if the range mode is selected.2011-05-02, by Ingo Weinzierl
- Prepared UI elements for the location and distance input tables.2011-04-29, by Raimund Renkert
- Added i18n strings for a longitudinal section curve.2011-04-28, by Ingo Weinzierl
- Added class diagrams for the client ui.2011-04-28, by Raimund Renkert
- Added error messages that are displayed during the feed operation.2011-04-18, by Ingo Weinzierl
- Each service is now called with the name of the current locale to set the request object's locale manually in the HttpClient.2011-04-14, by Ingo Weinzierl
- The title of a the ParameterList tab depends on the Artifact's name if we create a new project window with an existing Artifact.2011-04-12, by Ingo Weinzierl
- We can now distinuish between different artifact types based on its name in the DESCRIBE. The ArtifactCreator returns concrete instances of Artifacts now.2011-04-12, by Ingo Weinzierl
- The project list is sorted now.2011-04-12, by Ingo Weinzierl
- Filled the context menu point 'Open project' of the ProjectList with life - it opens a new window displaying the parameterization of the selected project.2011-04-12, by Ingo Weinzierl
- Improved the CollectionView and the ParameterList - both can be initialized with an existing artifact (parameterization).2011-04-12, by Ingo Weinzierl
- Added more i18n error messages.2011-04-12, by Ingo Weinzierl
- The CollectionRecord implements a method that returns the Collection objects which is represented by the record now.2011-04-12, by Ingo Weinzierl
- Added a new service to query an artifact description.2011-04-12, by Ingo Weinzierl
- Implemented a context menu for the project list.2011-04-11, by Ingo Weinzierl
- Implemented a service to fetch distance information of a river from the artifact server.2011-04-11, by Ingo Weinzierl
- Added a model class that represents a distance information.2011-04-11, by Ingo Weinzierl
- Improved the exception handling - added warnings for user authentication errors and errors that occur while fetching supported rivers.2011-04-08, by Ingo Weinzierl
- Added an exception class that should be used if the user authentication fails.2011-04-08, by Ingo Weinzierl
- Improved the exception handling of artifact / collection specific operations. Warning dialog are displayed after such an exception.2011-04-08, by Ingo Weinzierl
- Added a new exception class that is used to be thrown after artifact / collection operation specific errors.2011-04-08, by Ingo Weinzierl
- The ChartOutputTab calls the out() operation of a Collection now - no longer the out() of its first artifact.2011-04-07, by Ingo Weinzierl
- Fixed the function to toggle the language and added a warning dialog that informs the user about the creation of a new session.2011-04-07, by Ingo Weinzierl
- Removed the FLYSMessages interface and replaced it with a FLYSConstants interface - this interface has the ability to lookup i18n strings with given keys.2011-04-05, by Ingo Weinzierl
- Implemented the button to toggle the current locale.2011-04-05, by Ingo Weinzierl
- Added missing i18n footer strings.2011-04-05, by Ingo Weinzierl
- Tagged RELEASE 0.1 of FLYS Client.2011-03-30, by Ingo Weinzierl
- merged flys-backend/0.12012-09-28, by Thomas Arendsen Hein
- Fixed swap of operands in importer.2011-03-28, by Sascha L. Teichmann
- Forgot to save the last change before commit.2011-03-28, by Sascha L. Teichmann
- Added methods to find out if two ranges intersects.2011-03-28, by Sascha L. Teichmann
- Added an one to many relation to the discharge tables of a gauge.2011-03-24, by Sascha L. Teichmann
- Finished import of WSTs.2011-03-23, by Sascha L. Teichmann
- Build models for wsts, wst columns and q ranges and store them in the backend.2011-03-23, by Sascha L. Teichmann
- Add a hack to repair the units in WST files extraction.2011-03-23, by Sascha L. Teichmann
- Ported over some WST parsing stuff from desktop flys2011-03-22, by Sascha L. Teichmann
- Added import code for importing discharge tables.2011-03-22, by Ingo Weinzierl
- Added stub for WST parser.2011-03-22, by Sascha L. Teichmann
- Added importer helper model stubs for WST imports.2011-03-22, by Sascha L. Teichmann
- Second part of parsing/storing main values. Should be finished now.2011-03-21, by Sascha L. Teichmann
- Fixed wrong unique constraint.2011-03-21, by Sascha L. Teichmann
- Add forgotten column river_id in Gauges.2011-03-21, by Sascha L. Teichmann
- Added missing ImportGauge.getPeer() method2011-03-21, by Sascha L. Teichmann
- Propagate river into storing of gauges.2011-03-21, by Sascha L. Teichmann
- Added stub code to write gauges2011-03-21, by Sascha L. Teichmann
- First part of parsing main values.2011-03-18, by Sascha L. Teichmann
- Store annotations in backend.2011-03-18, by Sascha L. Teichmann
- Importer: Bound Attributes and Positions to there backend peers.2011-03-17, by Sascha L. Teichmann
- Added parser to read *.KM files.2011-03-17, by Sascha L. Teichmann
- Added new helper models for import.2011-03-17, by Sascha L. Teichmann
- Added parsing of PEGEL.GLT files.2011-03-17, by Sascha L. Teichmann
- Importer: Used thread local pattern to make sharing of session easier.2011-03-17, by Sascha L. Teichmann
- Importer: Fixed error in HQL statement.2011-03-17, by Sascha L. Teichmann
- Commented out a debug block because it leaks the db password.2011-03-17, by Sascha L. Teichmann
- Store imported rivers into database. Needs testing!2011-03-16, by Sascha L. Teichmann
- Default connection parameters are now overwritable with system properties.2011-03-16, by Sascha L. Teichmann
- Expose the creation of the SessionFactory to the public to2011-03-16, by Sascha L. Teichmann
- Importer: Added info gew parser.2011-03-16, by Sascha L. Teichmann
- SessionFactoryProvider for access to the backend.2011-03-15, by Sascha L. Teichmann
- Added dependency to artifacts-commons to be able to use the global configuration of the artifact database.2011-03-15, by Sascha L. Teichmann
- Added foreign key constraint annotations to model classes.2011-03-15, by Sascha L. Teichmann
- Fixed wrong spelled column references in foreign keys introduces with last change.2011-03-14, by Sascha L. Teichmann
- Added column annotations for simple fields. TODO: foreign keys.2011-03-14, by Sascha L. Teichmann
- Added entity and id annotations.2011-03-14, by Sascha L. Teichmann
- Added missing sequences. Deleted unsupported sqlite schema.2011-03-14, by Sascha L. Teichmann
- Bound Apache Commons DBCP with Hibernate.2011-03-11, by Sascha L. Teichmann
- More Hibernate/JPA stuff2011-03-11, by Sascha L. Teichmann
- Added POJOs to be mapped to schema.2011-03-10, by Sascha L. Teichmann
- Added dependency Hibernate Core 3.6.1 Final2011-03-09, by Sascha L. Teichmann
- Created a new empty maven project2011-03-09, by Sascha L. Teichmann
- Converted schema to be PostgreSQL compatible.2011-03-09, by Sascha L. Teichmann
- Factorized time intervals out into a separated table.2011-03-09, by Sascha L. Teichmann
- Initial database import scripts. Not finished, yet.2011-02-22, by Sascha L. Teichmann
- Initial check in of the FLYS database backend.2011-02-10, by Sascha L. Teichmann
- merged flys-artifacts/0.12012-09-28, by Thomas Arendsen Hein
- Renamed an output mode in the WINFO artifact configuration.2011-03-30, by Ingo Weinzierl
- Changed a german string in the resource bundle.2011-03-29, by Ingo Weinzierl
- Adapted the available calculation modes of WINFO and its order in the DESCRIBE document.2011-03-29, by Ingo Weinzierl
- Added the hash code of an artifact to the artifact part of the collection's DESCRIBE document.2011-03-28, by Ingo Weinzierl
- Changed the background color of discharge curves to white.2011-03-28, by Ingo Weinzierl
- DischargeTables: Cache the scale, too. Otherwise two calls to getValues() with different arguments will result in the same output.2011-03-28, by Sascha L. Teichmann
- The out() operation of the WINFO artifact draws discharge tables for gauges specified by the user.2011-03-28, by Ingo Weinzierl
- Added a helper class to export charts.2011-03-28, by Ingo Weinzierl
- Add factory to fetch gauges from database and filter them2011-03-28, by Sascha L. Teichmann
- Don't used interleaved x/y data.2011-03-25, by Sascha L. Teichmann
- Updated the TODO list.2011-03-25, by Ingo Weinzierl
- Bugfix: Added a missing artifact namespace prefix in the DESCRIBE document of a FLYSArtifactCollection.2011-03-25, by Ingo Weinzierl
- Implemented a FLYSArtifactCollection that will be used in this application now.2011-03-24, by Ingo Weinzierl
- Fetch w/q values of discharge tables for given gauges.2011-03-24, by Sascha L. Teichmann
- Added a further german resource bundle.2011-03-24, by Ingo Weinzierl
- The DESCRIBE of the WINFO artifact contains the available output modes now.2011-03-23, by Ingo Weinzierl
- The location_distance state of the WINFO parameterization has an output mode 'discharge_table' now.2011-03-22, by Ingo Weinzierl
- Append human readable strings of the selected values to the DESCRIBE output.2011-03-21, by Ingo Weinzierl
- Added some more calculation types (to the DESCRIBE in the calculation select state).2011-03-21, by Ingo Weinzierl
- Implemented the step-back part of the advance() operation.2011-03-21, by Ingo Weinzierl
- Fixed a german umlaut.2011-03-21, by Ingo Weinzierl
- Added new states to insert location/distance and w/q data in the config of a WINFO artifact.2011-03-18, by Ingo Weinzierl
- Added a new state for the W/Q input in the WINFO parameterization.2011-03-18, by Ingo Weinzierl
- New state for the location/distance input and some litte modifications of the DefaultState.2011-03-18, by Ingo Weinzierl
- Added a method to retrieve the UIProvider for a state.2011-03-17, by Ingo Weinzierl
- Let the states describe the static ui part.2011-03-17, by Ingo Weinzierl
- The 'rivers' service retrieves the rivers from backend now.2011-03-17, by Ingo Weinzierl
- Added support for the flys backend and an example how to use it.2011-03-17, by Sascha L. Teichmann
- Added section in configuration for database backend.2011-03-15, by Sascha L. Teichmann
- Fixed build error coming from different import of XMLUtils.2011-03-15, by Sascha L. Teichmann
- Appended a missing node to the DESCRIBE.2011-03-14, by Ingo Weinzierl
- I18N of strings for the DESCRIBE document.2011-03-14, by Ingo Weinzierl
- Introduced a state to select the calculation mode.2011-03-14, by Ingo Weinzierl
- Added an abstract base class DefaultState for States.2011-03-14, by Ingo Weinzierl
- Implemented a singleton instance that provides i18n strings.2011-03-14, by Ingo Weinzierl
- Appende the static data to the static node of the DESCRIBE document.2011-03-10, by Ingo Weinzierl
- The operations feed() and advance() return the current description of the artifact now.2011-03-10, by Ingo Weinzierl
- Implemented the step-forward part of the advance operation.2011-03-10, by Ingo Weinzierl
- Implemented the feed() operation.2011-03-09, by Ingo Weinzierl
- Added a TODO file.2011-03-09, by Ingo Weinzierl
- Added a FLYSArtifact that serves as the default artifact for the FLYS application.2011-03-09, by Ingo Weinzierl
- Added a RiverService (/service/rivers) that retrieves a list of provided rivers.2011-03-08, by Ingo Weinzierl
- Added a nodes for the user-factory and collection-factory to the configuration.2011-03-07, by Ingo Weinzierl
- Replaced the 'special' attribute of the DESCRIBE with a 'uiprovider' attribute.2011-03-01, by Ingo Weinzierl
- The RiverSelect state creates the dynamic UI part for the describe document now.2011-02-08, by Ingo Weinzierl
- Added mockup classes for working with rivers.2011-02-08, by Ingo Weinzierl
- The input data items of a state are read from configuration after the state has been setup.2011-02-07, by Ingo Weinzierl
- Added the current state and reachable states description to the describe document of the WINFO artifact.2011-02-07, by Ingo Weinzierl
- Changed the way of storing transitions in the TransitionEngine.2011-02-07, by Ingo Weinzierl
- Improved the WINFO artifact. Describe() returns the uuid and the hash of the artifact instead of just nothing.2011-02-04, by Ingo Weinzierl
- Improved the init process of the WINFOArtifact - there are two new states to select the river and the gauge.2011-02-04, by Ingo Weinzierl
- Added missing StateFactory class of the last commit.2011-02-04, by Ingo Weinzierl
- Improved the bootstrap process - the states are initialized.2011-02-04, by Ingo Weinzierl
- Initializes a TransitionEngine storing all transitions for each artifact at the application start.2011-02-03, by Ingo Weinzierl
- Added a first stub of an WINFO artifact.2011-02-02, by Ingo Weinzierl
- Added initial mvn project for FLYS artifacts.2011-02-01, by Sascha L. Teichmann
- Removed some out commented code that have been commited by mistaken.2011-03-30, by Ingo Weinzierl
- Improved the way how to i18n strings in our application.2011-03-30, by Ingo Weinzierl
- Removed useless imports.2011-03-30, by Ingo Weinzierl
- Bugfix: A collection view just creates a single time a new collection - even if we step back to a previous state and go forward afterwards.2011-03-30, by Ingo Weinzierl
- Added a new service to describe collections.2011-03-30, by Ingo Weinzierl
- Replaced a german string in the ProjectList.2011-03-30, by Ingo Weinzierl
- Integrated the ProjectList into the client. Now, the Collections of a user are displayed in the list.2011-03-29, by Ingo Weinzierl
- Added a service that returns the collections of a specified user.2011-03-29, by Ingo Weinzierl
- A collection provides a method to retrieve its creation time now.2011-03-29, by Ingo Weinzierl
- Fixed some issues.2011-03-29, by Raimund Renkert
- Added style information to avoid body margin.2011-03-29, by Raimund Renkert
- Changed some german strings.2011-03-29, by Raimund Renkert
- Resized CollectionView and set the content size to have a tabled style.2011-03-29, by Raimund Renkert
- The title of the parameter tab will change after the module has been selectd.2011-03-29, by Ingo Weinzierl
- Modified the URL of the 'back button' image.2011-03-29, by Ingo Weinzierl
- Fixed toggle method.2011-03-29, by Raimund Renkert
- Bugfix: Step back will remove duplicated output tab and an extended chart image URL bypasses the browser cache.2011-03-28, by Ingo Weinzierl
- Added a further plugin in the module selection and changed its alignment to vertical.2011-03-28, by Ingo Weinzierl
- Removed a label from ChartOutputTab.2011-03-28, by Ingo Weinzierl
- Removed the title (date string) of CollectionViews.2011-03-28, by Ingo Weinzierl
- Improved the positioning of helper widgets and some layout specific stuff.2011-03-28, by Ingo Weinzierl
- The project list button toggles the project list now.2011-03-28, by Raimund Renkert
- Replaced next button image with smart gwt button.2011-03-28, by Raimund Renkert
- Added footer and a spacer to the webpage layout.2011-03-28, by Raimund Renkert
- Customized background and ProjectList styles.2011-03-28, by Raimund Renkert
- Added a service that builds up requests to retrieve chart images. Use this service to display charts in the ChartOutputTab.2011-03-28, by Ingo Weinzierl
- Limited the area for CollectionView to the size of FLYSWorkspace.2011-03-28, by Raimund Renkert
- Fixed a typo.2011-03-28, by Ingo Weinzierl
- Added a panel that will be used to display chart output.2011-03-28, by Ingo Weinzierl
- Available output modes are displayed in the tab bar of the collection view.2011-03-28, by Ingo Weinzierl
- Moved parameterization specific code from CollectionView to ParameterList.2011-03-28, by Ingo Weinzierl
- Moved ParameterList specific code into the ParameterList.2011-03-26, by Ingo Weinzierl
- Adjusted the return type of the CreateCollectionService and added code to react on Collection changes (like output modes).2011-03-25, by Ingo Weinzierl
- Made the AddArtifactService accessible in the web.xml2011-03-25, by Ingo Weinzierl
- Added a service to add artifacts to collections.2011-03-25, by Ingo Weinzierl
- Changed theme to smartgwt Enterprise Blue.2011-03-25, by Raimund Renkert
- Added CollectionItems and Facets and replaced Artifact references in Collection with CollectionItems.2011-03-25, by Ingo Weinzierl
- Customized style for header and mainmenu.2011-03-24, by Raimund Renkert
- The output modes of an artifact are extracted from DESCRIBE document and put into the ArtifactDescription.2011-03-23, by Ingo Weinzierl
- Enhanced the ArtifactDescription and its default implementation to provide output modes.2011-03-23, by Ingo Weinzierl
- Added an interface and its default implementation to describe an output mode of an artifact.2011-03-23, by Ingo Weinzierl
- Moved image sources to an own directory to avoid that those files are included in the web application archive.2011-03-21, by Ingo Weinzierl
- Display human readable strings of the selected values in the UI.2011-03-21, by Ingo Weinzierl
- Implemented a mechanism to step back to previous states.2011-03-21, by Ingo Weinzierl
- Save the data explicitly in the LocationDistancePanel and WQInputPanel before returning the user input to avoid a nullpointer exception.2011-03-18, by Ingo Weinzierl
- The 'old' items in the parameter panel have a button to step back to a previous state (NOTE: just the UI stuff is implemented now).2011-03-18, by Ingo Weinzierl
- Adjusted the look of the 'next' button in the parameter panel.2011-03-18, by Ingo Weinzierl
- Read min/max values for the distance modes in WQInputPanel.2011-03-18, by Ingo Weinzierl
- Read min/max values for the distance mode in the LocationDistancePanel.2011-03-18, by Ingo Weinzierl
- Remove the dynamic parameter panel if a state is reached that doesn't need any user input.2011-03-18, by Ingo Weinzierl
- The widgets in the static part of the parameter panel are created using UIProviders now. The ParameterList does not build widgets any longer.2011-03-17, by Ingo Weinzierl
- The DataList has a label now.2011-03-17, by Ingo Weinzierl
- Introduced a data structure DataList to manage to list of Data objects of a single state.2011-03-17, by Ingo Weinzierl
- Added space between old params panel and new params panel.2011-03-17, by Ingo Weinzierl
- Some refactoring (imports, etc).2011-03-17, by Ingo Weinzierl
- Render the Single-W panel initially when the WQInputPanel is rendered.2011-03-17, by Ingo Weinzierl
- Implemented the getData() method of the WQInputPanel.2011-03-17, by Ingo Weinzierl
- Implemented the getData() method of the LocationDistancePanel.2011-03-17, by Ingo Weinzierl
- Some GUI improvements in the Location/Distance, W/Q and Module panels.2011-03-17, by Ingo Weinzierl
- Enhanced the UIProviderFactory.2011-03-17, by Ingo Weinzierl
- Refactored the LocationDistancePanel, so that is uses the DoubleArrayPanel and DoubleRangePanel from the last commit as well.2011-03-16, by Ingo Weinzierl
- Added a new widget to enter w/Q values in single and range mode.2011-03-16, by Ingo Weinzierl
- Added a new widget that enables the user to enter a location or a distance in a single step.2011-03-16, by Ingo Weinzierl
- Clear the panel that displays the current input widget before adding a new item to this panel.2011-03-15, by Ingo Weinzierl
- Implemented the step forward mechanism in the CollectionView and added the river map to the initial widget.2011-03-15, by Ingo Weinzierl
- Some improvements for displaying old parameters.2011-03-14, by Ingo Weinzierl
- Read i18n strings from DESCRIBE document and display those values in the UI.2011-03-14, by Ingo Weinzierl
- CollectionView implements HasParameterChangeHandler and ParameterChangeHandler interfaces.2011-03-10, by Ingo Weinzierl
- Bugfix: Removed static string from GUI element.2011-03-10, by Ingo Weinzierl
- Parse static data from DESCRIBE.2011-03-10, by Ingo Weinzierl
- Added a listener mechanism to notify listeners when the parameterization of a Collection/Artifact changed.2011-03-10, by Ingo Weinzierl
- Added a service for the ADVANCE operation and a service that bundles FEED and ADVANCE in a single service.2011-03-10, by Ingo Weinzierl
- Removed the GreetingService - was added initially while repository creation.2011-03-09, by Ingo Weinzierl
- Added a new widget that combines the module and the river selection. Users can now choose the desired plugin and river in one step.2011-03-09, by Ingo Weinzierl
- Added a service to list the supported rivers of the artifact server. The FLYS instance serves a method that retrieves this list.2011-03-09, by Ingo Weinzierl
- Improved the main menu - added further buttons (clickable labels).2011-03-08, by Ingo Weinzierl
- Integrated a header that contains a FLYS and a BfG logo.2011-03-08, by Ingo Weinzierl
- Implemented a service that triggers the artifact-collection creation in the artifact server.2011-03-07, by Ingo Weinzierl
- Added a User interface and a default implementation to handle users in this client.2011-03-07, by Ingo Weinzierl
- Added missing SmartGWT repository.2011-03-02, by Sascha L. Teichmann
- The CollectionView is able to create new instances of a WINFO artifact and to display the artifact's state.2011-02-22, by Ingo Weinzierl
- Implemented code to parse the UIProvider that should be used for a current state.2011-02-22, by Ingo Weinzierl
- Added event logic to enable step forward.2011-02-22, by Ingo Weinzierl
- Added UIProviders that are used to create widgets for entering data.2011-02-22, by Ingo Weinzierl
- The CollectionView implements the HasCollectionChangeHandlers interface now.2011-02-21, by Ingo Weinzierl
- Implemented a mechanism to listen to Collection changes.2011-02-18, by Ingo Weinzierl
- Enhanced the Collection and its default implementation.2011-02-18, by Ingo Weinzierl
- The DESCRIBE document returned by the artifact server is parsed after calling create() of the artifact service and a new Artifact is created with an ArtifactDescription that contains the UUID, HASH, und the current Data.2011-02-18, by Ingo Weinzierl
- Added missing pom.xml and ChangeLog modifications of the last commit.2011-02-18, by Ingo Weinzierl
- Integrated the httpclient for the communication between client and server. It is now possible to create a new WINFO artifact.2011-02-17, by Ingo Weinzierl
- Enhanced the CollectionView: there are radio buttons for each module and a button to select one of those.2011-02-17, by Ingo Weinzierl
- Adjusted interfaces used for the ArtifactDescription and added default implementations.2011-02-17, by Ingo Weinzierl
- Added interfaces and a stub implementation of an artifact service the should provide the methods for communicating with the artifact server.2011-02-16, by Ingo Weinzierl
- Modified the Artifact interface and added a DefaultArtifact implementation.2011-02-16, by Ingo Weinzierl
- Added a global configuration for the client and classes providing methods to retrieve these information.2011-02-16, by Ingo Weinzierl
- Added interfaces for Artifacts, its ArtifactDescription and Data.2011-02-11, by Ingo Weinzierl
- Radio buttons for each plugin are displayed if a new CollectionView is created.2011-02-11, by Ingo Weinzierl
- Added a workspace that handles the collection windows. New button to open a new collection.2011-02-11, by Ingo Weinzierl
- Added a new method that returns the UUID of a Collection.2011-02-11, by Ingo Weinzierl
- Implemented a ProjectList and added a mockup that displays two collections in that list.2011-02-10, by Ingo Weinzierl
- Added an interface and a default implementation of a Collection.2011-02-10, by Ingo Weinzierl
- Introduced a service that retrieves the user who is currently logged in. This user is displayed in the menu bar.2011-02-10, by Ingo Weinzierl
- Removed useless auto generated classes and added first ui elements with i18n support.2011-02-09, by Ingo Weinzierl
- Start of a GWT based client for FLYS-3.02011-02-08, by Ingo Weinzierl