graph
- Add DiagramGenerator which should mainly replace xygeneratorgenerator-refactoring 2013-09-18, by Andre Heinecke
- Factor out annotation handling codegenerator-refactoring 2013-09-18, by Andre Heinecke
- Fixed typo.generator-refactoring 2013-09-18, by Sascha L. Teichmann
- Correct group for jfreechartgenerator-refactoring 2013-09-18, by Andre Heinecke
- Added first version of diagram attribute parser.generator-refactoring 2013-09-18, by Sascha L. Teichmann
- Update jfreechart dependency to 1.0.15generator-refactoring 2013-09-18, by Andre Heinecke
- Use combine instead of combineignoringNaN (for compatibility)generator-refactoring 2013-09-18, by Andre Heinecke
- Add setup(Element config) method to Generator interface to be initialized from configuration.generator-refactoring 2013-09-18, by Sascha L. Teichmann
- issue971: Change CSV column separator to ";".2013-09-18, by Felix Wolfsteller
- issue971: Change CSV column separator to ";" for Exports, client-side change follows.2013-09-18, by Felix Wolfsteller
- Combine AxisDataset implementations and remove / simplify handling code.generator-refactoring 2013-09-18, by Andre Heinecke
- Add a copy of the ChartGenerator class.generator-refactoring 2013-09-17, by Andre Heinecke
- (issue1023) We do not support html getfeatureinfo2013-09-17, by Andre Heinecke
- Doc.2013-09-17, by Felix Wolfsteller
- WDifferencesState: Remove empty constructor.2013-09-17, by Felix Wolfsteller
- issue1470: Make validate of WDifferencesState return true if in "new chart".2013-09-17, by Felix Wolfsteller
- Doc.2013-09-16, by Felix Wolfsteller
- Doc.2013-09-16, by Felix Wolfsteller
- Cosmetics, typo fix in comment.2013-09-16, by Felix Wolfsteller
- Cosmetics.2013-09-16, by Felix Wolfsteller
- Added tag 3.0.15 for changeset a18a437647932013-09-16, by Andre Heinecke
- issue1235: Do not add 'other' values twice to suspended sed. values, fix range.3.0.15 2013-09-16, by Felix Wolfsteller
- Doc.2013-09-16, by Felix Wolfsteller
- Fix syntax error on oracle by removing unused paramater2013-09-16, by Andre Heinecke
- (issue1071) Change format for paramter a again2013-09-16, by Andre Heinecke
- (Issue 1353): Add warning when a gauge is skipped because of station2013-09-16, by Andre Heinecke
- issue1465: Assume that a "0" measurement for total sediment load is2013-09-16, by Felix Wolfsteller
- issue1157: Fix sorting by start time (descending) for cross-section selection.2013-09-16, by Felix Wolfsteller
- Schema change: increase precision of gauges.station to be able to hold nearby gauges.double-precision 2013-09-13, by Tom Gottfried
- Fixed misuse of x !=/== Double.NaN2013-09-13, by Sascha L. Teichmann
- issue1465: Adjust to new use of NaN instead of 0.2013-09-13, by Felix Wolfsteller
- issue1465: Do not allow null ranges for fraction values, logger.error instead.2013-09-13, by Felix Wolfsteller
- issue1465: Initialize sediment load fraction values with NaN instead of 0,2013-09-13, by Felix Wolfsteller
- issue1465: Show space instead of '-' in table results view.2013-09-13, by Felix Wolfsteller
- Typo fix.2013-09-13, by Sascha L. Teichmann
- Another tweak for flys/issue1353: Be more tolerant about river names.2013-09-13, by Sascha L. Teichmann
- make_release.sh: default DGM_PATH to path on poland.2013-09-13, by Tom Gottfried
- issue1465: Prepare SedimentLoadExporter to show "-" for NaN-values.2013-09-13, by Felix Wolfsteller
- Fix for flys/issue1479: Really iterate over the FLYS river not over empty list.2013-09-13, by Sascha L. Teichmann
- SCHEMA CHANGE: a < b now enforced on ranges.double-precision 2013-09-12, by Tom Gottfried
- DGM-importer: enforce a < b for ranges.double-precision 2013-09-12, by Tom Gottfried
- Range import: enforce a<b not only for WSTs and set only a for zero-length ranges.double-precision 2013-09-12, by Tom Gottfried
- Issue1333: expand single-line i.e. 0-lenght Q-range to minimal length.double-precision 2013-09-12, by Tom Gottfried
- Minor schema change: allow to delete ranges with associated DEMs.double-precision 2013-08-30, by Tom Gottfried
- Fix for flys/issue1018: Sort the pairs of (q, w) in q before creating a spline also in case of non interpolation.2013-09-12, by Sascha L. Teichmann
- Fix for flys/issue1479: The indices of the dates of the analysis periods where re-mapped wrong.2013-09-12, by Sascha L. Teichmann
- issue1472: Remove commented code.2013-09-12, by Felix Wolfsteller
- issue1472: Do not guess flow direction from differences.2013-09-12, by Felix Wolfsteller
- LocationDistancePanel error messages: do not imply calculation in the direction of kilometrage.2013-09-12, by Tom Gottfried
- merged accidental head (nothing changed)2013-09-12, by Tom Gottfried
- issue1378: Adjust style for flood-protection annotation values at y axis.2013-09-12, by Felix Wolfsteller
- Closing branch 'dc-km-filter', should already be integrated in default (but not tracked by hg).dc-km-filter 2013-09-11, by Bernhard Reiter
- (issue1023) mapserver templates mapfile.vm, wsplgen_layer.vm explicitely adding the three projects, so that mapserver offers the in the capabilities.2013-09-11, by Bernhard Reiter
- Closing inaktive branch "dc-km-filter-rr".dc-km-filter-rr 2013-09-11, by Bernhard Reiter
- Closing inactive branch.facets-slt 2013-09-11, by Bernhard Reiter
- Removed obsolete imports.2013-09-11, by Sascha L. Teichmann
- flys/issue1485 Better titles for UESK layers.2013-09-11, by Sascha L. Teichmann
- Closing branch 'interaktive-karte', the contents must have been merged (without hg tracking it) to default long ago because it is in there.interaktive-karte 2013-09-11, by Bernhard Reiter
- GWT client: Do not assumed there is always a SAML ticket when generating Wiki links.2013-09-11, by Sascha L. Teichmann
- issue1465: Removed fix for non-matching measurement station and stations range.2013-09-11, by Felix Wolfsteller
- Backed out changeset 6b9402377d072013-09-11, by Felix Wolfsteller
- flys/issue1417 Be more fault tolerant if a river has no flood plain.2013-09-10, by Sascha L. Teichmann
- issue1378: For additionals and basedata via datacage for2013-09-10, by Felix Wolfsteller
- issue1457: Handle symbolic discharge of -1 as 'no discharge'.2013-09-10, by Felix Wolfsteller
- Doc.2013-09-09, by Felix Wolfsteller
- mapserver templates for flys.map and rivers.map: correcting the wms_onlineresource URL to partly help (issue1023)2013-09-10, by Bernhard Reiter
- Fix for Browser and server running both on localhost. Previously all requests from localhost where accepted w/o auth. Now they are only accepted when a HTTP header X_NO_GGINA_AUTH=TRUE is send, too. This is ddone when printing maps.2013-09-09, by Sascha L. Teichmann
- Corrected doc.2013-09-06, by Felix Wolfsteller
- D4EArtifactCollection: Do not push CallContext and reference to db around.2013-09-06, by Felix Wolfsteller
- Doc.2013-09-06, by Felix Wolfsteller
- Doc.2013-09-06, by Felix Wolfsteller
- Doc.2013-09-06, by Felix Wolfsteller
- Correct SedimentLoadExporters compilability-fix.2013-09-06, by Felix Wolfsteller
- Make EpsilonComparator serializable.2013-09-05, by Tom Gottfried
- flys/issue1235: Same kicks against a few inconsistencies and bugs in the calculation of sediment loads. I believe it _do_not_ delivers the right results.2013-09-05, by Sascha L. Teichmann
- Doc.2013-09-05, by Felix Wolfsteller
- issue1465: Fetch correct measurement station (also if the km does not2013-09-05, by Felix Wolfsteller
- SedimentLoadFactory: Improved readability.2013-09-05, by Felix Wolfsteller
- SedimentLoadFactory: Further code simplification.2013-09-05, by Felix Wolfsteller
- SedimentLoadFactory: Minor simplification.2013-09-05, by Felix Wolfsteller
- SedimentLoadFactory: Extracted method to find range of matching2013-09-05, by Felix Wolfsteller
- SedimentLoadExporter: Minor refac. Determine a displayed string2013-09-05, by Felix Wolfsteller
- Workaround for flys/issue14070. TODO: Find the reason why a null document is given to the ThemeDocument.2013-09-04, by Sascha L. Teichmann
- issue1458: Avoid facet duplicates.2013-09-03, by Felix Wolfsteller
- Implement ManagedFacet.isSame to determine whether two facets are the same.2013-09-03, by Felix Wolfsteller
- Added new CompareUtil (singleton Helper class).2013-09-03, by Felix Wolfsteller
- AttributeWriter: Even better variable name.2013-09-03, by Felix Wolfsteller
- AttributeWriter: Slightly improved variable naming and comments.2013-09-03, by Felix Wolfsteller
- Added loadTotalRange getter.2013-08-30, by Felix Wolfsteller
- (issue1452) Coalesce to zero to avoid NaN arithmetic.2013-08-30, by Andre Heinecke
- (issue1023) Start returning more useful information2013-08-30, by Andre Heinecke
- issue1462/3: When changing units (t/a -> m^3/a), also change total load.2013-08-30, by Felix Wolfsteller
- SedimentLoad: Allow to set range of total load.2013-08-30, by Felix Wolfsteller
- Doc fix.2013-08-30, by Felix Wolfsteller
- SedimentLoadCalculation: Log an error on unknown mode.2013-08-30, by Felix Wolfsteller
- issue1462: 1) & 4) Fix wrong density interpolation code.2013-08-30, by Felix Wolfsteller
- Cosmetics, docs.2013-08-30, by Felix Wolfsteller
- Cosmetics.2013-08-30, by Felix Wolfsteller
- Doc.2013-08-30, by Felix Wolfsteller
- Let hibernate do the parsing/casting.2013-08-29, by Felix Wolfsteller
- issue957: Better name for flowvelocity measured values facets.2013-08-29, by Felix Wolfsteller
- Assign theme to flowvelocitymeasurementvaluefacets.2013-08-29, by Felix Wolfsteller
- Slightly better name for flowvelocitymeasurementvaluefacets.2013-08-29, by Felix Wolfsteller
- (issue1451) Round Q's in the way it is done for AT's and localize KM2013-08-29, by Andre Heinecke
- issue1466: Fix, sort stations before gap detection.2013-08-29, by Felix Wolfsteller
- DischargeCurveGenerator: Prevent NPE when no gauge can be found.2013-08-29, by Felix Wolfsteller
- issue1436: Exploit validity-rule of sedimentdensities.2013-08-28, by Felix Wolfsteller
- issue1436: Towards finding the best match in years for densities.2013-08-28, by Felix Wolfsteller
- issue1460: prevent NPEs when backstepping and changing Q values for WINFO2013-08-28, by Felix Wolfsteller
- Importer Doc: be clearer on DEM-metadata import.double-precision 2013-08-28, by Tom Gottfried
- Importer doc: added remark considering re-import of modified datadouble-precision 2013-08-27, by Tom Gottfried
- Datacage: Add dc:all-state-successors() to enable predicates like dc:contains(dc:all-state-successors($artifact-name, $current-state-id), 'state.winfo.calculation_mode') which recursively collects all successor state ids an check for containment.2013-08-27, by Sascha L. Teichmann
- (issue1451) Use distinct values for single_wq mode filtering instead of ranges.2013-08-27, by Andre Heinecke
- Fix NPE in case the artifact does not even have the master attribute2013-08-27, by Andre Heinecke
- DischargeLongitudinalSectionGenerator: Use QOutProcessor, fix compilation.2013-08-27, by Felix Wolfsteller
- Let QOutProcessor also handle Discharge/Q-data.2013-08-27, by Felix Wolfsteller
- SedimentLoadCalculation: Refactoring, extracted method.2013-08-27, by Felix Wolfsteller
- issue1455: Extract QOutProcessor, use it2013-08-27, by Felix Wolfsteller
- issue1455: Prepare MiddleBedHeightDiagram to show Q values.2013-08-27, by Felix Wolfsteller
- WQKmsInterpolArtifact: Add different facet if wst has only 'fake' Qs.2013-08-26, by Felix Wolfsteller
- Doc, cosmetics.2013-08-26, by Felix Wolfsteller
- WstValueTable: Add method to find out wether the Qs are 'fake'2013-08-26, by Felix Wolfsteller
- DischargeProcessor: Handle interpolated w values2013-08-26, by Felix Wolfsteller
- Cosmetics, added @Override annotation, vim line.2013-08-26, by Felix Wolfsteller
- Doc.2013-08-26, by Felix Wolfsteller
- Added new Theme.2013-08-26, by Felix Wolfsteller
- Added new ThemeMappings.2013-08-26, by Felix Wolfsteller
- Mapping new facet type to theme.2013-08-26, by Felix Wolfsteller
- Added new facet type to gaugedischargecurve.xml compat matrix.2013-08-26, by Felix Wolfsteller
- FacetTypes: Added new type other.w.interpol .2013-08-26, by Felix Wolfsteller
- Minor refactoring, renamed variable, extracted method.2013-08-26, by Felix Wolfsteller
- Typo fix in debug message.2013-08-22, by Felix Wolfsteller
- Artifacts: ThemeDocument. More debug output. Make more getters private to only expose the parsed values.2013-08-23, by Sascha L. Teichmann
- Artifacts: Make TextStyle Make more robust.2013-08-23, by Sascha L. Teichmann
- a bit of debug output2013-08-23, by Tom Gottfried
- Artifacts: ThemeDocument. Removed some zero length checks because we do not store zero length strings in the backing map.2013-08-23, by Sascha L. Teichmann
- Artifacts: ThemeDocument. The bloody part: Removal of the XPaths. Now the theme XML document is scanned once(!) at construction time for field values and the resulting key/value pairs are store in a map.2013-08-23, by Sascha L. Teichmann
- Artifacts: Removed ThemeUtil.2013-08-23, by Sascha L. Teichmann
- Artifacts: Moved logic of ThemeUtils into ThemeDocument. TODO: Remove ThemeUtils2013-08-23, by Sascha L. Teichmann
- Artifacts: Introduce ThemeDocument & make stuff compileable again. THIS BREAKS THE SYSTEM! TODO: Move ThemeUtils into ThemeDocument.2013-08-22, by Sascha L. Teichmann
- Artifacts: Make it compilable again.2013-08-22, by Sascha L. Teichmann
- ETL: Take care of the fact that one river in AFT/SGM may correspond to N rivers in FLYS.2013-08-22, by Sascha L. Teichmann
- Added tag 3.0.14 for changeset 84b1e87e86692013-08-22, by Andre Heinecke
- ComputedDischargeCurveGenerator: Use DischargeProcessor to add main values.2013-08-22, by Felix Wolfsteller
- ChartGenerator: Changed visibility of doAnnotations,2013-08-22, by Felix Wolfsteller
- DischargeCurveGenerator: Use DischargeProcessor.2013-08-22, by Felix Wolfsteller
- DischargeProcessor: Handle main-values. Temporarily disable w/q data handling.2013-08-22, by Felix Wolfsteller
- DischargeProcessor: Minor refactoring (use getter), warn when no αΊ€/Q data found.2013-08-22, by Felix Wolfsteller
- Give correct name to outlier method3.0.14 2013-08-21, by Tom Gottfried
- Potential fix for flys/1453.2013-08-21, by Sascha L. Teichmann
- Backed out changeset 60f39ee194732013-08-21, by Sascha L. Teichmann
- ETL: Potential fix for flys/1453.2013-08-21, by Sascha L. Teichmann
- Removed obsolete imports.2013-08-21, by Sascha L. Teichmann
- FixA: Remapped indices of analysis periods, too. Needs testing!2013-08-21, by Sascha L. Teichmann
- BWASTR-Import: name of tributary contains name of river, not the other way round.double-precision 2013-08-21, by Tom Gottfried
- issue1378: Add axis markers for additional long-sect. without Q (e.g. dike heights).2013-08-21, by Felix Wolfsteller
- Cosmetics.2013-08-21, by Felix Wolfsteller
- issue1378: Also add ability to add text-annotations.2013-08-21, by Felix Wolfsteller
- Geo-Importer: import axes 2D to avoid problems with invalid z-coordinatesdouble-precision 2013-08-21, by Tom Gottfried
- FixA: Fix logger class reference.2013-08-21, by Sascha L. Teichmann
- issue1378 (part): Make DC config for discharge curve offer correct2013-08-21, by Felix Wolfsteller
- issue1378: Prepare DischargeCurveGenerator to digest wq-interpolated data.2013-08-21, by Felix Wolfsteller
- Cosmetics.2013-08-21, by Felix Wolfsteller
- issue1378: Prepare StyledSeriesBuilder to get double[][] values to translate.2013-08-21, by Felix Wolfsteller
- issue1378: Preparing DischargeProcessor to be able to draw W/Q points,2013-08-20, by Felix Wolfsteller
- Cosmetics.2013-08-20, by Felix Wolfsteller
- Initial DischargeProcessor-commit (skeleton).2013-08-20, by Felix Wolfsteller
- FixA: Make dates of analysis periods unique, too. TODO: Remap the indices like the reference interval.2013-08-21, by Sascha L. Teichmann
- FixA W/Q Diagram: Allow duplicate points. It should work but it doesn't. :-/2013-08-20, by Sascha L. Teichmann
- FixA: Fixed reference events mapping. TODO: Same for analysis periods.2013-08-20, by Sascha L. Teichmann
- FixA Delta W(t): Add 30 seconds to colliding dates to avoid them vanishing from the diagrams.2013-08-20, by Sascha L. Teichmann
- FixA: Reference points facets: the index of the point is stored in the lower 8 bits of the facect index. Why was it search via getIndex()?2013-08-19, by Sascha L. Teichmann
- FixA overview: Fetch dates in higher resolution from database.2013-08-19, by Sascha L. Teichmann
- Undo misguided schema change from r5207double-precision 2013-08-19, by Tom Gottfried
- (issue1071) Increase river km column width2013-08-19, by Andre Heinecke
- issue738: Adjust S/Q-Relation Diagram subtitles.2013-08-19, by Felix Wolfsteller
- Fix Analysis: Code simplification in facets.2013-08-19, by Sascha L. Teichmann
- Client: Removed an XPath eval and simplified a loop.2013-08-19, by Sascha L. Teichmann
- Add small script to generate an issue overview from a roundup querry.2013-08-19, by Andre Heinecke
- Factored our date formatter.2013-08-19, by Sascha L. Teichmann
- Break long lines.2013-08-19, by Sascha L. Teichmann
- issue1225: Add bedheight/year-difference points with a scale factor,2013-08-19, by Felix Wolfsteller
- StyledSeriesBuilder: Added new method to add points with a scane factor.2013-08-19, by Felix Wolfsteller
- Minor refactoring.2013-08-19, by Felix Wolfsteller
- issue1395: Add missing w_differences compat to new chart ls.2013-08-19, by Felix Wolfsteller
- (issue1347) Add SQ Relation fields for measurement station information2013-08-19, by Andre Heinecke
- (issue1347) Update jasper templates with new fields2013-08-19, by Andre Heinecke
- (issue1347) Add measurement station getter for location2013-08-19, by Andre Heinecke
- Make debug functions of D4EArtifact public2013-08-19, by Andre Heinecke
- Merged backout of changes for 1440 (gap-detection in bedquality).2013-08-19, by Felix Wolfsteller
- Backed out changeset 10646f31efec2013-08-19, by Felix Wolfsteller
- Merged.2013-08-19, by Felix Wolfsteller
- issue1157: Only look at the best match for CrossSections to activate.2013-08-19, by Felix Wolfsteller
- (issue1391): Build the current discarge curve name as requested2013-08-16, by Andre Heinecke
- (issue1391)Add compatibility for hist.discharge in Hist discharge output2013-08-16, by Andre Heinecke
- (issue1391) Filter by reference_gauge or by KM2013-08-16, by Andre Heinecke
- Minor layout change2013-08-16, by Andre Heinecke
- Fixing Analysis: Significantly (8-10x) improved the performance of the generation of the overview data. The data is now prefetched in batches.2013-08-17, by Sascha L. Teichmann
- Removed _stupid_ TODO question. WE WANT PULL OUT LOGIC OUT OF ARTIFACTS!2013-08-17, by Sascha L. Teichmann
- Add FixingCalculatedPoint to second theme, too2013-08-16, by Andre Heinecke
- Part of flys/issue1168: Make facet names unique. It should help but there must be bug before the facet generation.2013-08-15, by Sascha L. Teichmann
- (issue1444) Add theme for fixing calculated point2013-08-15, by Andre Heinecke
- Readd accidentally removed line2013-08-15, by Andre Heinecke
- (Issue1357) Pull river name into getReferenceGauge2013-08-15, by Andre Heinecke
- Improve debug output in timerangestate2013-08-15, by Andre Heinecke
- (issue1353) Add river name handling2013-08-15, by Andre Heinecke
- (issue1353) Add method to model to gauge by number and river name2013-08-15, by Andre Heinecke
- (issue1353) Add river name to query for discharge Info2013-08-15, by Andre Heinecke
- Part of flys/issue1168: Fix themes of fixings delta w averages. Bring default and second theme back in snyc.2013-08-15, by Sascha L. Teichmann
- Part of flys/issue1168: Show discharge sector averages as lines again.2013-08-15, by Sascha L. Teichmann
- Add missing import in ArtifactMapfileGenerator2013-08-15, by Christian Lins
- (issue657) Prevent errornous recreation of usershape mapfile fragment.2013-08-15, by Christian Lins
- (issue657) Use regular expressions in Mapfile templates to catch various spellings of feature class types.2013-08-15, by Christian Lins
- Backed out changeset 74a437805e2a2013-08-14, by Sascha L. Teichmann
- (issue1347) Localize outliers and pdf Header2013-08-14, by Andre Heinecke
- (Issue1347) Update jasper files for pdf export of new data2013-08-14, by Andre Heinecke
- (issue1347) Add new variables to SQ Relation output.2013-08-14, by Andre Heinecke
- Fix typo in SQRelation calculation2013-08-14, by Andre Heinecke
- Mapfile templates contain regex expressions to catch features more robust (#657).2013-08-14, by Christian Lins
- import_rivers.sh: skip cross sections instead of WST-file in first run.double-precision 2013-08-14, by Tom Gottfried
- Importer Doc: force import of waterlevel WST-file in first run.double-precision 2013-08-14, by Tom Gottfried
- Importer: force import of waterlevel WST-file in first run.double-precision 2013-08-14, by Tom Gottfried
- S/Q relation: Fixed broken parameter creator constructor.2013-08-14, by Sascha L. Teichmann
- S/Q relation: Added forgotten class.2013-08-14, by Sascha L. Teichmann
