dive4elements/river: revision graph

graph

less more | rev 8575: (0) -1920 tip

Merge of MINFO improvement developments2015-03-10, by Andre Heinecke
There seems to be no use case for not overriding these methods.2015-03-06, by Tom Gottfried
The bug that motivated this extremely defensive error-handling was fixed in Rev fe7e9da6312a by nomore calling close() on a private variable.2015-03-06, by Tom Gottfried
Remove superfluous private variable.2015-03-06, by Tom Gottfried
(issue1798) Adjust WinCM according to W in NHN axis on explicit zoom2015-02-27, by Andre Heinecke
Do not get any wst values just to get the name of the differences for export.2015-02-26, by Andre Heinecke
Readd StaticWQKmsCacheKey and use it again.2015-02-26, by Andre Heinecke
Use updated class name instead of no more existant.2015-02-26, by Tom Gottfried
(issue1797) Increase session debug output2015-02-24, by Andre Heinecke
(issue1797) Move close into session release and guard it.2015-02-24, by Andre Heinecke
Replace offensive comment by a more constructive note.2015-02-17, by Andre Heinecke
(Issue1755) Add distance step selection to bed quality artifact2015-02-16, by Andre Heinecke
Move static operation out of loop.2015-02-16, by Andre Heinecke
(issue1755) Move KM Step handling from Winfo artifact to RangeAccess2015-02-16, by Andre Heinecke
Accept more elevation system names (e.g. with hyphen).2015-02-16, by Tom Gottfried
Meta-data on sounding width associated to bed heights is redundant to real data associated to values.2015-02-16, by Tom Gottfried
Bed heights are just bed heights since a while ('single' is obsolete).2015-02-16, by Tom Gottfried
Remove obsolete class hierarchy for bed height data.2015-02-16, by Tom Gottfried
Abstract parser for bed heights is obsolete.2015-02-16, by Tom Gottfried
Importer: Remove obsolete interface for bed heights.2015-02-16, by Tom Gottfried
Remove obsolete interface for bed height values.2015-02-16, by Tom Gottfried
Morphological width imported and stored with heights is redundant to table morphologic_width.2015-02-16, by Tom Gottfried
bed height differences datacage: only supply differences where subtrahend is older than minuend or year is unknown.2015-02-16, by Tom Gottfried
(issue1754) Add km filtering for winfo anf fixanal results in difference calculations2015-02-16, by Andre Heinecke
Actually configure a bedheight cache.2015-02-16, by Andre Heinecke
(issue1754) Fix wst static cache name.2015-02-16, by Andre Heinecke
(issue1754) Extend WKms interface for KM filtering2015-02-16, by Andre Heinecke
(issue1754) Gracefully handle empty differenc results (e.g from km 0,001 to 0,002)2015-02-16, by Andre Heinecke
(issue1754) Add distantce handling to WINFO differences state2015-02-16, by Andre Heinecke
Warn for not implemented difference handling of minfo artifacts.2015-02-16, by Andre Heinecke
(issue1750) It is an error if there are more then two stations at the same range.2015-02-13, by Andre Heinecke
(Issue1754) Make BedDifference calculation range dependent.2015-02-13, by Andre Heinecke
(issue1750) Take Static SQ Relations based on a range and merge them together2015-02-13, by Andre Heinecke
(issue1753) Remove "measured" from CSV header2015-02-13, by Andre Heinecke
(issue1753) Add measurements to CSV export2015-02-13, by Andre Heinecke
(issue1753) Add SQ Measurement dates as text annotations to points2015-02-13, by Andre Heinecke
(issue1753) Carry measurement date through SQ values2015-02-13, by Andre Heinecke
(issue1753) Add label theme for SQMeasurements2015-02-13, by Andre Heinecke
Log the server startup to stdout2015-02-13, by Andre Heinecke
(issue1599) Add manualpoints theme for MSH2015-02-12, by Andre Heinecke
(issue1068) Add different theme for SQOutlier curves and increase SQCurve linesize to 22015-02-12, by Andre Heinecke
(issue1786) Enable manualline facets for cross section charts2015-02-12, by Andre Heinecke
(issue869) Remove horizontal lines in parameters2015-02-12, by Andre Heinecke
(issue1051) Use a list of single years in SedimentLoadYear mode2015-02-11, by Andre Heinecke
(issue1051) Add input support for epochs2015-02-11, by Andre Heinecke
(issue1788) Do not divide area by two.2015-02-18, by Andre Heinecke
(issue1717) Use unified description for y-field in editor for manual points in historical discharge time-diagrams.2015-02-18, by Tom Gottfried
(issue1795) Handle modules configuration for any module2015-02-17, by Andre Heinecke
(issue1794) Safeguard against layers without extent.2015-02-17, by Andre Heinecke
Update uuid of "Rhein"2015-01-30, by Andre Heinecke
(issue1777) Move logging code for existing tickets to the correct location2015-01-16, by Andre Heinecke
Remove useless i18n that cannot be called from server anyhow.2015-01-12, by Tom Gottfried
Release script: build binaries for publication when tagging and slightly mavenize the whole process.2014-12-19, by Tom Gottfried
Useful default for path to DEMs.2014-12-19, by Tom Gottfried
It's useful to have an uncompressed tar to which more files can be appended.2014-12-19, by Tom Gottfried
We don't need the base directory in the assembly.2014-12-19, by Tom Gottfried
Let overview be the first tab in SQ relation output.2014-12-19, by Tom Gottfried
On error log error.2014-12-18, by Tom Gottfried
Set useful default for mapserver-URLs.2014-12-18, by Tom Gottfried
Exclude transitive dependency because of conflicting version which breaks charting.2014-12-18, by Tom Gottfried
Update Oracle-POM in backend and add pom-oracle.xml with respective dependency to artifacts.2014-12-17, by Tom Gottfried
Configure standalone binary assembly.2014-12-17, by Tom Gottfried
Use Maven instead of potentially outdated JARs for creation of h2-databases. TODO: adapt release script.2014-12-17, by Tom Gottfried
OpenLayers download moved to github.2014-12-17, by Tom Gottfried
Put artifact server run-script in it's final place.2014-12-16, by Tom Gottfried
ETL: Upgrade PostgreSQL dependency to same version as river-backend.2014-12-16, by Tom Gottfried
(issue1782) Invert artifact range if necessary in officiallinefinder2014-12-16, by Andre Heinecke
(issue1782) Invert KM filter if from is larger then to2014-12-16, by Andre Heinecke
(issue1782) Select index based on km for step generation2014-12-16, by Andre Heinecke
(issue1777) Evaluate CLIENT_CONF environment variable2014-12-16, by Andre Heinecke
(issue1777) Add options to change login redirect and disable login2014-12-16, by Andre Heinecke
(issue1777) Log saml logins also as info without username.2014-12-16, by Andre Heinecke
(issue1777) Hide logout button if it is configured.2014-12-16, by Andre Heinecke
Whitespace-cleanup in XML-files.2014-12-16, by Tom Gottfried
Release script: remove installation specific defaults and give the possibility to overwrite any config-file in WEB-INF.2014-12-15, by Tom Gottfried
The used patch build of SmartGWT is not available anymore.2014-12-15, by Tom Gottfried
Release script: use trusted connections to repositories.2014-12-15, by Tom Gottfried
Remove obsolete Wiki-URL config in client.2014-12-15, by Tom Gottfried
The base-URL comes from elsewhere. Other *.properties-files know that already.2014-12-15, by Tom Gottfried
Do not filter tables without end date in recommendations for historical discharge tables.2014-12-12, by Tom Gottfried
Artifact-server config in release script: remove installation specific defaults and give the possibility to overwrite any config-file.2014-12-04, by Tom Gottfried
Do not give Oracle-JARs with hardcoded personal path in release script.2014-12-04, by Tom Gottfried
Correct header for release script.2014-12-04, by Tom Gottfried
Added tag 3.1.9 for changeset 7bc675e4e6e02014-12-02, by Tom Gottfried
Remove trailing whitespace.3.1.9 2014-12-02, by Sascha L. Teichmann
Removed obsolete imports.2014-12-02, by Sascha L. Teichmann
Time series chart: bounds cannot allways be assumed to be given.2014-12-02, by Tom Gottfried
Do not flood log with details about all facets.2014-12-02, by Tom Gottfried
Datacage config: Oracle has no boolean data type and thus can not handle such CASE-statement in WHERE-clause.2014-12-02, by Tom Gottfried
Remove non-existant artifact from config.2014-12-02, by Tom Gottfried
Make maxWait configurable and wait for 30 seconds2014-11-28, by Tom Gottfried
maxWait should be set independendly of validationQuery.2014-11-28, by Tom Gottfried
Use validation queries for release.2014-11-27, by Tom Gottfried
Use explicit query to avoid hibernate connection leak.2014-11-27, by Tom Gottfried
Connection pool: do not wait forever for new connections and be more verbose.2014-11-27, by Tom Gottfried
Upgrade hibernate.2014-11-27, by Tom Gottfried
Add missing annotation.2014-11-27, by Tom Gottfried
Use RiverAccess instead of RiverUtils.2014-11-27, by Tom Gottfried
We depend on PostreSQL >= 9.1 at least since rev 598e4bec920b (because of CTE).2014-11-27, by Tom Gottfried
Use portable validation queries.2014-11-26, by Tom Gottfried
The used patch build of SmartGWT is not available anymore.2014-11-26, by Tom Gottfried
Add validation-query to example configuration.2014-11-25, by Andre Heinecke
Datacage: order WSTs according to column numbers in import files.2014-11-20, by Tom Gottfried
(issue1772) Use 0.001km tolarance instead of 0.1 to find matching km.2014-11-18, by Andre Heinecke
Remove obsolete lines from drop script.2014-11-13, by Tom Gottfried
Added a validation SQL query to database backends.2014-11-12, by Sascha L. Teichmann
Remove docs for specific system.2014-11-06, by Tom Gottfried
Cross section navigation: behave equally, regardless of whether an input value is below or above the range of possible values.2014-11-05, by Tom Gottfried
(issue1767) Fix lookup of closest value.2014-11-05, by Andre Heinecke
Gauge locations are obsolete since a long time.2014-11-05, by Tom Gottfried
(issue1767) Fix closet next value selection.2014-11-04, by Andre Heinecke
Add possibility to pack install-script in release tarball.2014-11-04, by Tom Gottfried
Remove no more existant processor from config.2014-10-30, by Tom Gottfried
Remove obsolete historical discharge curve implementations.2014-10-30, by Tom Gottfried
Load discharge curves via recommendations in historical discharge calculation. ToDo: Remove the other logic to load them.2014-10-30, by Tom Gottfried
Accept number as argument in dc:date-format().2014-10-30, by Tom Gottfried
Unify wording and spelling for axis fixation in chart properties editor.2014-10-30, by Tom Gottfried
Remove obsolete setting of start date.2014-10-30, by Tom Gottfried
(issue1764) Use datepicker with text field2014-10-30, by Andre Heinecke
Improve error handling.2014-10-29, by Andre Heinecke
(issue1764) Set upper-time and lower-time for time series axes2014-10-29, by Andre Heinecke
(issue1764) Handle date ranges in chart properties editor2014-10-29, by Andre Heinecke
Recognize the 'no-data value' of fromkm and tokm in datacage statement for discharge curves.2014-10-29, by Tom Gottfried
(issue1732) When duplication wsplgen artificats fix shapefile layers2014-10-28, by Andre Heinecke
(issue1733) Use rangeaccess to access range information in location select2014-10-28, by Andre Heinecke
The used patch build of SmartGWT is not available anymore. The newer was used for the 3.1.8 release already.2014-10-28, by Tom Gottfried
(issue1733) Fix locationdistancepanel2014-10-27, by Andre Heinecke
(issue1733) Fix switch between location and distance2014-10-27, by Andre Heinecke
(issue1733) Remove weird and broken code (fixes tab selection)2014-10-27, by Andre Heinecke
(issue1733) Clearly set location distance defaults2014-10-27, by Andre Heinecke
(issue1769) Adapt release script for new print url.2014-10-24, by Andre Heinecke
In case to equals from, and only in this case, there should be only one class. Then we have to set an arbitrary value > 0 for step because the user is allowed to give step=0.2014-10-24, by Tom Gottfried
(issue1762) Use getValue to obtain dateRange values2014-10-22, by Andre Heinecke
Do not transform Q values from cm to m.2014-10-21, by Tom Gottfried
Added tag 3.1.8 for changeset 7cb55659646d2014-10-20, by Tom Gottfried
Removed obsolete imports.3.1.8 2014-10-20, by Sascha L. Teichmann
Avoid encoding problem with NaN in bed difference export.2014-10-20, by Tom Gottfried
Adapt PDF-export to new columns in bed differences result.2014-10-20, by Tom Gottfried
Mention gauge name in theme name for historical discharge curves.2014-10-20, by Tom Gottfried
More cleanup in discharge data processing.2014-10-20, by Tom Gottfried
Unify descriptions of model discharge curve at gauge.2014-10-20, by Tom Gottfried
For fixation analysis, allow loading discharge curves from multiple gauges on calculation range via datacage.2014-10-20, by Tom Gottfried
Antiprogramming (in german: 'Softwareabwicklung')2014-10-17, by Tom Gottfried
i18n cleanup.2014-10-17, by Tom Gottfried
Load sounding width via recommendations for bed height differences and cleanup and fix related bed height macros.2014-10-17, by Tom Gottfried
Remove obsolete class.2014-10-17, by Tom Gottfried
Do not add a sounding width facet for bed height differences.2014-10-17, by Raimund Renkert
fixed bed difference export.2014-10-17, by Raimund Renkert
There might be no sounding width given at some stations of a bed height single.2014-10-17, by Tom Gottfried
Removed obsolete import.2014-10-17, by Sascha L. Teichmann
Removed obsolete imports.2014-10-17, by Sascha L. Teichmann
Removed obsolete imports.2014-10-17, by Sascha L. Teichmann
Added i18n strings for sounding width and data gap.2014-10-17, by Raimund Renkert
Bedheight differences exports sounding width and data gap for minuend and subtrahend.2014-10-17, by Raimund Renkert
Only draw discharge curve if on same station as navigation.2014-10-17, by Sascha L. Teichmann
Removed morpho width from bed height diffs.2014-10-17, by Sascha L. Teichmann
Do not filter bed heights by year in datacage for optional data (plus some cleanup).2014-10-17, by Tom Gottfried
Give ordered list of measurement stations at river.2014-10-16, by Tom Gottfried
Add comment to measurement stations info.2014-10-16, by Tom Gottfried
Reduce code duplication and repair filter for sediment load-recommendations.2014-10-16, by Tom Gottfried
SCHEMA CHANGE: 'comment' is not acceptable as column name for Oracle.2014-10-15, by Tom Gottfried
More detailed documentation on SQ-relation import.2014-10-15, by Tom Gottfried
We only want to use stations with an end km.2014-10-15, by Tom Gottfried
SCHEMA CHANGE: removed superfluous columns station and river_id from measurement_stations and adapted other components accordingly.2014-10-15, by Tom Gottfried
SCHEMA CHANGE: There is no boolean data type in oracle, and therefore it's no good idea to use it in postgresql.2014-10-15, by Tom Gottfried
Whitespace cleanup and small addition regarding sediment load at measurement stations.2014-10-14, by Tom Gottfried
Purge redundant station-column (the values will go to kmstart).2014-10-14, by Tom Gottfried
Purge sorting stations without range to end of list.2014-10-14, by Tom Gottfried
Put date range into facet descriptions for curve and measurements.2014-10-14, by Tom Gottfried
Distinguish between types of measurement stations and filter appropriately (plus minor cleanup in related classes).2014-10-14, by Tom Gottfried
Unify colors of SQ-relations and distinguish outliers by point size.2014-10-13, by Tom Gottfried
Remove non-mapped dependencies of removed theme.2014-10-13, by Tom Gottfried
Theme-style cleanup for discharge curves.2014-10-13, by Tom Gottfried
Add possibility to give custom client log4j.properties.2014-10-10, by Tom Gottfried
Added tag 3.1.7 for changeset 319aa972a1a32014-10-10, by Tom Gottfried
Fixed date filter for fix overview.3.1.7 2014-10-09, by Raimund Renkert
Log successful/unsuccessful authentication without traceback.2014-10-09, by Tom Gottfried
Backed out changeset da67b2bca1c0 Not needed.2014-10-09, by Sascha L. Teichmann
Fixing overview filter: Accept date range as UNIX time stamps, too.2014-10-09, by Sascha L. Teichmann
Add location data to sq relation artifact. Fixed station name.2014-10-08, by Raimund Renkert
Added location to measurement station sq relation.2014-10-08, by Raimund Renkert
Further subtitle cleanup (including obsolete classes using them).2014-10-08, by Tom Gottfried
If context contains pnp, transform W to m.2014-10-08, by Raimund Renkert
Only the master-artifact should decide about injected CURRENT_KM et al. (and removed dependend obsolete class).2014-10-08, by Sascha L. Teichmann
Removed dependency to FixWQCurveGenerator in processor.2014-10-08, by Raimund Renkert
For whatever reason (if any) facet descriptions with trailing whitespace are stripped from the legend.2014-10-07, by Tom Gottfried
Removed some code duplication and moved macros to more appropriate places in file.2014-10-07, by Tom Gottfried
Fixed some typos in datacage docs.2014-10-07, by Tom Gottfried
Unify discharge curve subtitles.2014-10-07, by Tom Gottfried
Try to determine gauge by km in gauge discharge facet for exporter.2014-10-07, by Raimund Renkert
Use more recent SmartGWT-build.2014-10-07, by Tom Gottfried
Add possibility to give custom config for server log.2014-10-07, by Tom Gottfried
Transform export in cm at gauge. TODO: don't transfrom twice if coming from PegelInfo.2014-10-06, by Tom Gottfried
merged.2014-10-06, by Raimund Renkert
Use context constant for current km in fix delta w/t generator.2014-10-06, by Raimund Renkert
Purge RiverUtils from ATExporter.2014-10-06, by Tom Gottfried
Manual points shall be plotted in discharge diagrams.2014-10-06, by Tom Gottfried
It's the description we want to see in the legend, not the facet name.2014-10-06, by Tom Gottfried
Q-symmetric datacage configuration for user-data.2014-10-03, by Tom Gottfried
Make derived curve-diagram working with subtitle.2014-10-02, by Tom Gottfried
Re-add line previously removed accidentally between lots of comments.2014-10-02, by Tom Gottfried
Added km sub title to fix derivate curve, too.2014-10-02, by Sascha L. Teichmann
Removed obsolete import.2014-10-02, by Sascha L. Teichmann
merged.2014-10-02, by Raimund Renkert
Added i18n strings.2014-10-02, by Raimund Renkert
Fixed W/Q diagram subtitle in fix analysis.2014-10-02, by Raimund Renkert
Use the CURRENT_KM constant from injectors.2014-10-02, by Raimund Renkert
The current km is needed for SQ diagrams too.2014-10-02, by Tom Gottfried
Overwriting the current km in context gives unexpected results if artifacts from different km have been loaded.2014-10-02, by Tom Gottfried
s/logger/log/ or removed unused logger.2014-10-02, by Tom Gottfried
dataset can be null.2014-10-02, by Tom Gottfried
Fetch current km from context (and remove obsolete or superfluous comments and logging).2014-10-02, by Tom Gottfried
wUnit might be null.2014-10-02, by Tom Gottfried
Purge obsolete representation of reference system for discharge tables.2014-10-01, by Tom Gottfried
Instead of adding datum to Q-values, correctly transform W-values to meter above datum.2014-10-01, by Tom Gottfried
Removed obsolete imports.2014-10-01, by Sascha L. Teichmann
Removed obsolete imports.2014-10-01, by Sascha L. Teichmann
Deliver historical discharge curves in meter, not centimeter over datum.2014-10-01, by Tom Gottfried
merged.2014-10-01, by Raimund Renkert
Use the current km from context for fix analysis W/Q subtitle.2014-10-01, by Raimund Renkert
Updated i18n strings.2014-10-01, by Raimund Renkert
Added y axis label to discharge processors.2014-10-01, by Raimund Renkert
Use i18n string for w in cm axis.2014-10-01, by Raimund Renkert
Fixed i18n string for x axis label in discharge curves.2014-10-01, by Raimund Renkert
Never ever set current km via RiverUtils.2014-10-01, by Tom Gottfried
Remove misplaced file extension.2014-10-01, by Tom Gottfried
Let injectors be strictly distinct from each other and give more meaningful names (they know what they do, not where they will be used. The latter is configuration).2014-10-01, by Tom Gottfried
Correct url parameter in client.2014-10-01, by Sascha L. Teichmann
There ist no need to format a number as a string and then re-parse it to double to get its double value. Just take the double value!2014-10-01, by Sascha L. Teichmann
Removed obsolete imports.2014-10-01, by Sascha L. Teichmann
Auto-include zero in Q-domain axis.2014-09-30, by Tom Gottfried
Use ws in m for duration curve.2014-09-30, by Raimund Renkert
Remove duplication of AnnotationHelper-code in ChartGenerator.2014-09-30, by Tom Gottfried
Allow W-mainvalues in SQ-relation.2014-09-30, by Tom Gottfried
Introduce annotations, which know to which axis they belong.2014-09-30, by Tom Gottfried
Create mainvalue facets before setting up the artifact.2014-09-30, by Raimund Renkert
Look for gauge if no pnp is set in the context and return w in cm if at gauge.2014-09-29, by Raimund Renkert
Scale second W-axis in cm according to first axis, which is expanded relative to the data, and set bounds for zooming purposes (plus a bit of cleanup in DiagramGenerator).2014-09-26, by Tom Gottfried
Avoid NPE if river is not accessible.2014-09-26, by Tom Gottfried
The derivative curve is also a discharge diagram.2014-09-26, by Tom Gottfried
Throw non-lethal XPathException if not at gauge instead of lethal PSQLException if at gauge.2014-09-26, by Tom Gottfried
Q-main values as recommendations in SQ. TODO: solve DDZ.2014-09-26, by Tom Gottfried
Let's be more generous with facet activity of main values.2014-09-26, by Tom Gottfried
bed_height_single.old_elevation_model_id is not NOT NULL.2014-09-26, by Tom Gottfried
Main values: Reduce code duplication and correct logic to specify whether we are at gauge or not.2014-09-26, by Tom Gottfried
Avoid NPE if no dataset is activated in theme list.2014-09-26, by Tom Gottfried
Added config for sq relation loaded via datacage.2014-09-26, by Raimund Renkert
merged.2014-09-25, by Raimund Renkert
Use the sq relation artifact to load data from datacage.2014-09-25, by Raimund Renkert
Inject current km and pnp into the context used to calculate W in cm at gauge.2014-09-25, by Raimund Renkert
Reduce misspelled, superfluous logging.2014-09-25, by Tom Gottfried
Removed obsolete imports.2014-09-25, by Sascha L. Teichmann
Use right logger in DischargeGenerator.2014-09-25, by Sascha L. Teichmann
Run native2ascii over FLYS*.properties.2014-09-25, by Sascha L. Teichmann
Added missing l10n strings.2014-09-24, by Sascha L. Teichmann
Generate a W in CM axis if there are W data.2014-09-24, by Sascha L. Teichmann
Added PNP injectors to Q/X diagrams.2014-09-24, by Sascha L. Teichmann
And Developer said, Let there be Q symmetry and there was Q symmetry.2014-09-24, by Sascha L. Teichmann
Do not die if values <= 0 are tried to be plotted on log axis.2014-09-24, by Tom Gottfried
Make ChartArea and thus annotations sensible for logarithmic axes (plus some minor cleanup).2014-09-24, by Tom Gottfried
Removed obsolete imports.2014-09-24, by Sascha L. Teichmann
merged.2014-09-24, by Raimund Renkert
Updated the client to build a default artifact for sq relations.2014-09-24, by Raimund Renkert
Configured "static" sq relation to use a default D4EArtifact and two states to hold the parameters and outs.2014-09-24, by Raimund Renkert
Renamed ui provider for static data panel.2014-09-24, by Raimund Renkert
Make SQ-relations loadable in WQ-diagrams.2014-09-23, by Tom Gottfried
Make WQ-data loadable in SQ-diagrams. We still need to handle mainvalues and values <=0 on x-axis.2014-09-23, by Tom Gottfried
Q-symmetry: SQ-relations should not be filtered for specific outs (and optimised statement a bit).2014-09-23, by Tom Gottfried
Put all macros for wst-data in one place and reduce code duplications.2014-09-23, by Tom Gottfried
Remove duplications from discharge prototypes and put it all together.2014-09-22, by Tom Gottfried
merged.2014-09-22, by Raimund Renkert
Added injector for PNP.2014-09-22, by Raimund Renkert
Updated the client to build a default artifact for gauge discharge curve.2014-09-22, by Raimund Renkert
Configured gauge discharge curve to use a default D4EArtifact and two states to hold the parameters and outs.2014-09-22, by Raimund Renkert
Classify and sort iteration over user-data non-recommendations.2014-09-19, by Tom Gottfried
Classify and sort iteration over non-recommendations.2014-09-19, by Tom Gottfried
Classify and sort iteration over recommendations.2014-09-19, by Tom Gottfried
Purge clash of out-names, resulting hacks and tests for not existing outs and give some more meaningful names.2014-09-19, by Tom Gottfried
Official sedimentload epochs should be seperated from other data in datacage.2014-09-19, by Tom Gottfried
These meta-lines had been invented before.2014-09-18, by Tom Gottfried
At least since rev eb052d759fcc, there are no bed height epochs anymore.2014-09-18, by Tom Gottfried
Added tag 3.1.6 for changeset 301a32bd70452014-09-17, by Tom Gottfried
Though not yet part of the calculation, suspended load has to be optionally loadable through datacage.3.1.6 2014-09-17, by Tom Gottfried
Set facet activity for middle bed height.2014-09-17, by Tom Gottfried
Add theme for porosity and sync second with default.2014-09-17, by Tom Gottfried
In case the list is not ordered, in the end diagrams might look weird.2014-09-17, by Tom Gottfried
Consider new SQ-diagrams in datacage config.2014-09-17, by Tom Gottfried
Essentially backout rev 8ad0b7bc3e73 as this makes some SQ-relation curves appear buckled.2014-09-17, by Tom Gottfried
Avoid NPE if river is not accessible.2014-09-17, by Tom Gottfried
merged.2014-09-17, by Raimund Renkert
Fixed style for sq relation link in measurement station info grid.2014-09-17, by Raimund Renkert
i18n is meant for translation and unfortunately the client has three files for that.2014-09-17, by Tom Gottfried
merged.2014-09-17, by Raimund Renkert
Avoid NPE in discharge context injector if no start km was set.2014-09-17, by Raimund Renkert
Added themes for new fraction in sq relation.2014-09-17, by Raimund Renkert
Added new fraction to sq relation.2014-09-17, by Raimund Renkert
Outs might be set in the client.2014-09-16, by Tom Gottfried
Crude script to find non-existant outs in meta-data.xml2014-09-16, by Tom Gottfried
Update comment on conditional loading of user content.2014-09-16, by Tom Gottfried
merged.2014-09-16, by Raimund Renkert
The default state is no more abstract.2014-09-16, by Raimund Renkert
Set facet activity for bed quality.2014-09-16, by Tom Gottfried
Add metadata to bedheight facets in bed height differences.2014-09-16, by Tom Gottfried
Adopt configuation of artifacts into new xml documents to make them configurable inline.2014-09-15, by Sascha L. Teichmann
Purge some duplicated logging an misleading comments.2014-09-15, by Tom Gottfried
Call orphaned macro originating from 'fix_wq_curve' in prototype.2014-09-15, by Tom Gottfried
Make use of publicly available external WMS (Pegelonline) otherwise called from BfG-specific macro.2014-09-15, by Tom Gottfried
Remove call of BfG-specific macro.2014-09-12, by Tom Gottfried
A bit less chaos in i18n for bed heights.2014-09-12, by Tom Gottfried
merged.2014-09-12, by Raimund Renkert
Added themes for SQ relation overview chart.2014-09-12, by Raimund Renkert
SQ relation overview is now a single chart containing all fractions.2014-09-12, by Raimund Renkert
Added discharge curve prototye.2014-09-12, by Sascha L. Teichmann
Fixed location distance panel. TODO: Switch to location table and select tabs.2014-09-12, by Raimund Renkert
Fixed multi period panel in fix analysis.2014-09-12, by Raimund Renkert
Making i18n work was just easier using less wrappers in this case (issue1631).2014-09-11, by Tom Gottfried
Measurement stations without range should not be used in calculation and we assume the beginning of the range is the station.2014-09-11, by Tom Gottfried
Suspended sand is part of total load.2014-09-11, by Tom Gottfried
merged.2014-09-11, by Raimund Renkert
Fixed date range panel in fix analysis.2014-09-11, by Raimund Renkert
Removed obsolete imports.2014-09-10, by Sascha L. Teichmann
Made call context injectors a list of comma separated classes.2014-09-10, by Sascha L. Teichmann
merged.2014-09-10, by Raimund Renkert
Added injectors to config and moved subtitle conf.2014-09-10, by Raimund Renkert
Added context injectors for discharge curves.2014-09-10, by Raimund Renkert
Added tag 3.1.5 for changeset d81c4b0d5ca72014-09-09, by Tom Gottfried
Write CSV-header only once.3.1.5 2014-09-09, by Tom Gottfried
Fix duration curve i18n.2014-09-09, by Tom Gottfried
Some i18n completion in hist. discharge curves.2014-09-09, by Tom Gottfried
Enable dynamic zoom-range in subtitle.2014-09-09, by Tom Gottfried
Patch build from given date not available anymore.2014-09-09, by Tom Gottfried
We well want to average NaNs but want to know the cause of the result being NaN.2014-09-09, by Tom Gottfried
Suggestion: sort measurement stations along the river and only along the river.2014-09-09, by Tom Gottfried
(issue1448) Fix info service for epoch / periods and off epoch2014-09-09, by Andre Heinecke
Suggestion: Load official epochs via recommendations instead of a pseudo-calculation.2014-09-09, by Tom Gottfried
(issue1448) Actually filter out not matching sq_time_interval_ids2014-09-08, by Andre Heinecke
(issue1448) Objectify sq_time_interval id.2014-09-08, by Andre Heinecke
(issue1448) Finally use the sq time interval as filter in the calculation.2014-09-08, by Andre Heinecke
(issue1448) Unify SedimentLoadData ctor again2014-09-08, by Andre Heinecke
(issue1448) Add Sq time interval to sediment load accessor2014-09-08, by Andre Heinecke
(issue1448) Look through all the data for sq_ti_id in following states.2014-09-08, by Andre Heinecke
(issue1448) Carry sq_ti_date in artifact description anf fix sqtipanel2014-09-08, by Andre Heinecke
(issue1448) Use correct data name for ti_id and carry string value of selected date.2014-09-08, by Andre Heinecke
(issue1448) In a list of one element. Select the only element.2014-09-08, by Andre Heinecke
(issue1448) Add Panel for new sq_ti_select state2014-09-08, by Andre Heinecke
(issue1448) Extend SedimentLoadInfo request to handle sq time intervals2014-09-08, by Andre Heinecke
(issue1448) Extend SL info service to handle sq_time_intervals2014-09-08, by Andre Heinecke
(issue1448) Fix return values of SQ time interval accessors2014-09-08, by Andre Heinecke
(issue1448) Add l10n for new sq time interval state.2014-09-08, by Andre Heinecke
(issue1448) Add SQ Time interval select state2014-09-08, by Andre Heinecke
Pass request document to the context injectors.2014-09-08, by Sascha L. Teichmann
Merged.2014-09-08, by Sascha L. Teichmann
Made it compile with changed ContextInjector interface again.2014-09-08, by Sascha L. Teichmann
Let official epochs be showy and remove detritus of 'yields' in datacage config.2014-09-08, by Tom Gottfried
Call context inspector in output helper.2014-09-08, by Sascha L. Teichmann
Stop stupid propagation of out subtype in generators. What is this? It is not used anyway.2014-09-08, by Sascha L. Teichmann
Added context injector to generators.2014-09-08, by Sascha L. Teichmann
Merged2014-09-08, by Sascha L. Teichmann
Anti programming: Throw CrossSectionApp away. Not useful ATM. The backing data structures are fine now and the original purpose of the app was to figure them out.2014-09-08, by Sascha L. Teichmann
We only need to know what's going on upstream.2014-09-08, by Tom Gottfried
Fetch missing values from database and show them in diagrams.2014-09-08, by Tom Gottfried
Allow fractions without SQ-time interval (suspended sediment) to be loaded.2014-09-08, by Tom Gottfried
Error reports for sediment load calculation.2014-09-05, by Tom Gottfried
Do not inherit smartgwt include the javascript directly in FLYS.htmlsuperdev 2014-09-05, by Andre Heinecke
Update GWT to 2.6.1superdev 2014-09-05, by Andre Heinecke
(issue1448) Use left join to permit loads with empty sq_time intervals to be handled.2014-09-05, by Andre Heinecke
Fixed broken build.2014-09-05, by Sascha L. Teichmann
Sediment load: converted grain fraction name to an array lookup.2014-09-05, by Sascha L. Teichmann
Added new processor for fix derived curve.2014-09-05, by Raimund Renkert
Added processor for discharge curve in fixanalysis.2014-09-05, by Raimund Renkert
Do not return pure NaN data.2014-09-05, by Tom Gottfried
Sediment loads at measurement stations and longitudinal sections need different processing and styling for diagrams.2014-09-05, by Tom Gottfried
sed 's/logger/log/g' src/**/*.java2014-09-05, by Sascha L. Teichmann
sed src/**/*.java 's/logger/log/g'2014-09-05, by Sascha L. Teichmann
Make it compile again.2014-09-05, by Sascha L. Teichmann
sed -i src/**/*.java 's/logger/log/g'2014-09-05, by Sascha L. Teichmann
(issue1448) Add sq time intervals to sediment load data model.2014-09-05, by Andre Heinecke
Forget to adjust a string reference to a moved backend utils class.2014-09-05, by Sascha L. Teichmann
Anti programming: Removed obsolete classes in client. This may break stuff because of the GWT magic.2014-09-05, by Sascha L. Teichmann
Find obsolete Java files in more than one project hierachie.2014-09-05, by Sascha L. Teichmann
Anti programming: Removed TIM parser which ist not needed any longer.2014-09-05, by Sascha L. Teichmann
Removed obsolete imports.2014-09-04, by Sascha L. Teichmann
Sum up fractions from stations and previous stations according to respective validity model.2014-09-04, by Tom Gottfried
Add Q'n'D Python script to find obsolete Java files.2014-09-04, by Sascha L. Teichmann
merged2014-09-04, by Sascha L. Teichmann
Anti programming.2014-09-04, by Sascha L. Teichmann
merged.2014-09-04, by Raimund Renkert
Use processors for historical discharge curves.2014-09-04, by Raimund Renkert
Moved package org.dive4elements.river.utils to org.dive4elements.river.backend.utils.2014-09-04, by Sascha L. Teichmann
Removed NASTY package clash. We had too org.dive4elements.river.util packages.2014-09-04, by Sascha L. Teichmann
Removed obsolete average and renamed some symbols to make the difference between single fractions and sums of them clearer in the calculation.2014-09-04, by Tom Gottfried
Remove dead class.2014-09-04, by Sascha L. Teichmann
merged.2014-09-04, by Raimund Renkert
Changed discharge processor to plot only discharge curves and added processor for computed discharge curves.2014-09-04, by Raimund Renkert
Added new processor to plot misc discharge data, e.g. from datacage or recommendations.2014-09-04, by Raimund Renkert
The existing implementation respects the fact that months are 0-based.2014-09-03, by Tom Gottfried
Complete CSV-export and correct headers.2014-09-03, by Tom Gottfried
Rev aa80f9ba56a9 was incomplete. Shame on me.2014-09-03, by Tom Gottfried
We have to calculate bed load plus suspended sand instead of suspended load.2014-09-03, by Tom Gottfried
Let epochs be averages over their years.2014-09-02, by Tom Gottfried
Precalculated sums from the database will come through recommendations.2014-09-02, by Tom Gottfried
Make sedimentload loadable as old calculation.2014-09-02, by Tom Gottfried
Only calculated sums of fractions should be initially shown in diagram.2014-09-01, by Tom Gottfried
Fix fraction respectively facet names and descriptions.2014-09-01, by Tom Gottfried
Broken -> broke away.2014-09-01, by Tom Gottfried
Do not handle the impossible.2014-09-01, by Tom Gottfried
Handle missing years in bed height differences without assuming an unknown year to be BC 1.2014-09-01, by Tom Gottfried
Converted configuration for discharge diagrams to the new Q symmetry style.2014-08-29, by Sascha L. Teichmann
Added diagram defaults for discharge diagrams.2014-08-29, by Sascha L. Teichmann
Renamed tag in sq relation defaults to a more fitting name.2014-08-29, by Sascha L. Teichmann
Added new diagramm generator for Q symmetry.2014-08-29, by Sascha L. Teichmann
More shoveling araound generators.2014-08-29, by Sascha L. Teichmann
Added a woking copy for discharge diagramm generators. All modifications are go in here. If the process is finished we'll remove the old one and rename the copy to discharge-diagramms.xml2014-08-29, by Sascha L. Teichmann
We have only 4 of them.2014-08-29, by Tom Gottfried
More fixes for conf.xml2014-08-29, by Sascha L. Teichmann
Moved external system entites back to conf.xml. Uncool.2014-08-29, by Sascha L. Teichmann
Cleaned up generator dependencies.2014-08-29, by Sascha L. Teichmann
Moved more generator stuff in reguarding sub directory.2014-08-29, by Sascha L. Teichmann
Allow deeper nesting of output-generators in conf.xml. This allows better separation of concerns of different generator types.2014-08-29, by Sascha L. Teichmann
Moved generators.xml and its dependencies to a directory of their own.2014-08-29, by Sascha L. Teichmann
Moved external system entity for longitudinal sections default to generators.xml. TODO: Move in entirely different file.2014-08-29, by Sascha L. Teichmann
Removed obsolete imports.2014-08-29, by Sascha L. Teichmann
Fixed build error.2014-08-29, by Sascha L. Teichmann
The relevant contents are now in artifacts/doc/datacage_ref_de.rst.2014-08-29, by Tom Gottfried
IDs can be assumed to be unique.2014-08-28, by Tom Gottfried
Do not put metadata on series if there are none (avoid NPE).2014-08-28, by Tom Gottfried
Quoting is done elsewhere since rev 7021753b3797.2014-08-28, by Tom Gottfried
The rest is silence.2014-08-27, by Tom Gottfried
Make Logarithmic axis immun against negative values (not throwing Exceptions in that case).2014-08-27, by Sascha L. Teichmann
Let the facet know the period of it's data.2014-08-27, by Tom Gottfried
Calculate all single years in given interval but only once.2014-08-27, by Tom Gottfried
Merged.2014-08-26, by Sascha L. Teichmann
Datacage: Insert variable values literally into output.2014-08-26, by Sascha L. Teichmann
With the exception of real calculation results, descriptions of sediment loads can all follow the same pattern.2014-08-26, by Tom Gottfried
Metadata in datacage tooltips for sediment densities, bed heights, flow velocities and sounding widhts.2014-08-26, by Tom Gottfried
Added missing generics parameter.2014-08-26, by Sascha L. Teichmann
Sediment load: Remove simple tail recursive calls from SedimentLoadData.recursiveFindStations(). More carefully this time.2014-08-26, by Sascha L. Teichmann
Removed obsolete same package imports.2014-08-26, by Sascha L. Teichmann
Removed obsolete imports.2014-08-26, by Sascha L. Teichmann
Fix exporter loops2014-08-25, by Andre Heinecke
Acctually use the new Sedilmentload calculation2014-08-25, by Andre Heinecke
Make SedimentloadExporter work with the new result scheme.2014-08-25, by Andre Heinecke
Correctly handle not creating facets and error reports.2014-08-25, by Andre Heinecke
GetFractionByName now returns a list as it can differ in Epochs2014-08-25, by Andre Heinecke
Add period to sedimentloaddataresult fraction2014-08-25, by Andre Heinecke
Use old names for SedimentloadDataFractions and add average fraction2014-08-25, by Andre Heinecke
Actually return the period in SedimentLoadAccess2014-08-25, by Andre Heinecke
Fix compilation of last commit2014-08-25, by Andre Heinecke
Another fix for find stations in sediment load.2014-08-25, by Sascha L. Teichmann
Correctly output problems in SedimentLoadDataCalculate2014-08-25, by Andre Heinecke
(issue1448) Add WIP SedimentLoadDataFacet and use it in calculation.2014-08-25, by Andre Heinecke
(issue 1448) Use new data model for sedimentloadinfo2014-08-25, by Andre Heinecke
Sediment load: Fixed findStations() and add findLoads().2014-08-25, by Sascha L. Teichmann
Tooltip for sediment loads in datacage.2014-08-22, by Tom Gottfried
Add SQ time interval to selection tree in datacage for sediment loads.2014-08-22, by Tom Gottfried
Remove code duplications in sedimentload datacage.2014-08-22, by Tom Gottfried
Format timestamps in datacage tooltip for porosities.2014-08-22, by Tom Gottfried
Dashed lines shall be used for sediment load at measurement stations (issue1352).2014-08-21, by Tom Gottfried
Complete mapping and themes for sediment load.2014-08-21, by Tom Gottfried
Make a difference between themes representing loads in different units.2014-08-21, by Tom Gottfried
i18n for sediment loads.2014-08-20, by Tom Gottfried
Reconstruct facet description of sediment load longitudinal sections. i18n will follow.2014-08-20, by Tom Gottfried
Reconstruct facet description of sediment load at measurement stations. i18n will follow.2014-08-20, by Tom Gottfried
Let hg ignore downloaded SmartGWT stuff.2014-08-20, by Tom Gottfried
Change facet.sedimentload.dc to facet.sedimentload.ls2014-08-20, by Andre Heinecke
(issue1681) Add l10n for grain fractions2014-08-20, by Andre Heinecke
(issue1681) Handle different grain fraction kinds2014-08-20, by Andre Heinecke
Fix typo in sedimentload i18n2014-08-20, by Andre Heinecke
(issue1681) Add themes for sedimentloads2014-08-20, by Andre Heinecke
Remove todos about sedimentload_ls facet2014-08-20, by Andre Heinecke
Remove unecessary debut output2014-08-20, by Andre Heinecke
Configure SedimentLoadLSFacet2014-08-20, by Andre Heinecke
Add SedimentLoadLSFacet2014-08-20, by Andre Heinecke
Add getSedimentLoadById accessor2014-08-20, by Andre Heinecke
Distinction by measurement station gives lots of duplicates, as we always get a whole longitudinal section.2014-08-19, by Tom Gottfried
Fix binarysearch logic in SedimentLoadData2014-08-15, by Andre Heinecke
Add translation for sedimentloads2014-08-15, by Andre Heinecke
Add new and simplyfied SedimentLoadFacet2014-08-15, by Andre Heinecke
Fix ti_stop_time naming2014-08-15, by Andre Heinecke
Change sedimentload factory from yields to loads.2014-08-15, by Andre Heinecke
Configure sedimentload static facet2014-08-15, by Andre Heinecke
Rename the SedimentLoadDataFacet and add deprection comment2014-08-15, by Andre Heinecke
Revert accidental change.2014-08-15, by Andre Heinecke
Expose sedimentLoad stations2014-08-15, by Andre Heinecke
merge2014-08-15, by Andre Heinecke
Move the old data facet out of the way.2014-08-15, by Andre Heinecke
Use list() instead of iterator(). Why does this not work?2014-08-15, by Sascha L. Teichmann
Add comment on how to obtain smartgwt2014-08-11, by Andre Heinecke
Do not try to load empty files.2014-08-11, by Andre Heinecke
Be more tolerant with not existing artifact configurations.2014-08-12, by Sascha L. Teichmann
Added the broken calculation state of the new sediment load calc.2014-08-11, by Sascha L. Teichmann
Removed same package import.2014-08-11, by Sascha L. Teichmann
Removed obsolete import.2014-08-11, by Sascha L. Teichmann
Merged2014-08-11, by Sascha L. Teichmann
Removed obsolete imports.2014-08-11, by Sascha L. Teichmann
Build is locale sensitive. Force a UTF-8 locale for building.2014-08-11, by Andre Heinecke
Datacage config for new sediment load structures. Missing: some facets and everything down from the innermost macros for sediment load at measurement stations.2014-08-08, by Tom Gottfried
Added $RADIUS zoom scale sub title logic to other diagrams.2014-08-07, by Sascha L. Teichmann
Some typos in datacage config reference.2014-08-07, by Tom Gottfried
Fixed sub title zoom stuff.2014-08-07, by Sascha L. Teichmann
Merged2014-08-07, by Sascha L. Teichmann
flys/issue1262: Introduce variable $RADIUS to be used in user defined chart sub titles.2014-08-07, by Sascha L. Teichmann
Cleaned layout for infolines (issue1635).2014-08-07, by Tom Gottfried
SCHEMA CHANGE: rename database tables from yield to load_ls according to respective classes.2014-08-06, by Tom Gottfried
Parse meta data for multi attribute data.2014-08-05, by Sascha L. Teichmann
Added meta infos for multi items to enable client to order the columns in a defined order.2014-08-05, by Sascha L. Teichmann
More idiomatic Java string concat.2014-08-05, by Sascha L. Teichmann
Sediment load: transform units for official epochs, too.2014-07-31, by Sascha L. Teichmann
Sediment load: refactored epoch calculation to not average over all but per year.2014-07-31, by Sascha L. Teichmann
Sediment load: fetch sediment density for transforming t/a to m^3/a.2014-07-30, by Sascha L. Teichmann
Sediment load: Cached sediment values dont depend on year. The cached object is an index over year so there is not need to ask the factory for this.2014-07-30, by Sascha L. Teichmann
Sediment load: Ensure that the lists of values are always ordered station wise. This was a hidden bug. :-/2014-07-30, by Sascha L. Teichmann
Sediment density: Got rid of stupid extra year tracking.2014-07-30, by Sascha L. Teichmann
Sedimen load: Added bundle for fraction results.2014-07-30, by Sascha L. Teichmann
Fix wsplgen name2014-07-23, by Andre Heinecke
Sediment load: More of official epochs.2014-07-18, by Sascha L. Teichmann
SCHEMA CHANGE and Importer: get time intervals of SQ-relations from metalines in sediment load files.2014-07-18, by Tom Gottfried
Sediment load: Fetch kind of sediment load from database to tell if it is official or not.2014-07-18, by Sascha L. Teichmann
Sediment load: More on calculating epoch loads.2014-07-18, by Sascha L. Teichmann
Importer: Import sediment load at measurement stations.2014-07-18, by Tom Gottfried
Sediment load. More off year based calculations.2014-07-18, by Sascha L. Teichmann
My hint that MeasurementStation does not know it's river was not true. Thus backout rev 8c14588d1f78.2014-07-18, by Tom Gottfried
Sediment load: dispatch calculation modes.2014-07-18, by Sascha L. Teichmann
Sediment load: take arguments from sediment access.2014-07-18, by Sascha L. Teichmann
Sediment load access: Cache values.2014-07-18, by Sascha L. Teichmann
Sediment load: Added more 'sums' to be calculated.2014-07-17, by Sascha L. Teichmann
Sediment load: (incomplete) new sediment load calculation.2014-07-17, by Sascha L. Teichmann
Sediment Load: Added table to figure out where grain fractions are measured.2014-07-17, by Sascha L. Teichmann
Sediment load: Added join to fetch measurement station via ranges which know the river. Added a visitor for values, too.2014-07-17, by Sascha L. Teichmann
ImporterSession: Load measurement stations via ranges which hold a reference to the river.2014-07-17, by Sascha L. Teichmann
Merged.2014-07-17, by Sascha L. Teichmann
Sediment load: Merge measurement stations if they have the same km. The chaining was too complicated to build algorithms on top of it.2014-07-17, by Sascha L. Teichmann
Divide SedimentLoadLSParser into AbstractSedimentLoadParser and SedimentLoadLSParser to be able to reuse code for a new SedimentLoadParser for data at measurement stations.2014-07-16, by Tom Gottfried
Introduce LineParserException for CSV file parsing.2014-07-16, by Sascha L. Teichmann
Sediment load: Recognize grain fractions 'total', 'bed_load' and 'suspended_load' from pre-calculations.2014-07-16, by Sascha L. Teichmann
Replace station list with a plain array.2014-07-16, by Sascha L. Teichmann
Use GF_UNKNOWN constant instead of -1 to identify unknown grain fractions.2014-07-16, by Sascha L. Teichmann
Directly chain stations with the same km position together. This ease some summations.2014-07-16, by Sascha L. Teichmann
Added filters for loaded sediment data values. Year, Epochs (time ranges), And and Or.2014-07-16, by Sascha L. Teichmann
Throw out old visitor model and use grain fraction filters instead. Fixed neighborhood wirinng of measument stations.2014-07-16, by Sascha L. Teichmann
Sediment loads from cache are sorted in station order so range filters2014-07-15, by Sascha L. Teichmann
Wire the neighbors to the measurement stations together. This eases the lookup for same types (suspended or bed load).2014-07-15, by Sascha L. Teichmann
New way to loaded sediment loads from database and cache it. The data structure a way more straight forward. TODO: Implement calculation on this basis.2014-07-15, by Sascha L. Teichmann
SCHEMA CHANGE and Importer (only longitudinal section data so far): only grain fractions given now in schema are valid. We are handling sediment loads, not yields.2014-07-14, by Tom Gottfried
Renamed ImportSedimentYield to ImportSedimentLoadLS.2014-07-11, by Sascha L. Teichmann
Fix for flys/issue1735 (Versatz in den HYK-Dateien)2014-07-11, by Sascha L. Teichmann
Added method to importer session to fetch the measurement station for given (river, km).2014-07-10, by Sascha L. Teichmann
Added importer models for sediment load and sediment load values.2014-07-10, by Sascha L. Teichmann
Load grain fractions from database only. Do not store new ones.2014-07-10, by Sascha L. Teichmann
Added Hibernate mappings for new sediment load database model.2014-07-10, by Sascha L. Teichmann
Renamed SedimentYield to SedimentLoadLS and SedimentYieldValue to SedimentLoadLSValue. Adjust the names of the parsers and the rest of the glue.2014-07-09, by Sascha L. Teichmann
Renamed SedimentLoad to SedimentLoadLSData to make place for SedimentLoad in backend.2014-07-09, by Sascha L. Teichmann
Removed obsolete imports.2014-07-09, by Sascha L. Teichmann
Removed obsolete imports.2014-07-09, by Sascha L. Teichmann
Merged2014-07-09, by Sascha L. Teichmann
Support the "new" HYK format which enables setting the end of the last flow zone.2014-07-09, by Sascha L. Teichmann
Repair last commit.2014-07-09, by Tom Gottfried
SCHEMA CHANGE: consistent naming scheme and drop script for sediment load at measurement stations.2014-07-09, by Tom Gottfried
SCHEMA CHANGE: Added new structure for sediment loads measured at measurement stations.2014-07-08, by Tom Gottfried
Close branch facet-metadata. It's all in default now.facet-metadata 2014-07-08, by Tom Gottfried
Merged branch facet-metadata into default.2014-07-08, by Tom Gottfried
merged default into branch facet-metadata.facet-metadata 2014-07-08, by Tom Gottfried
Updated german i18n strings.facet-metadata 2014-07-04, by Raimund Renkert
merged.facet-metadata 2014-07-03, by Raimund Renkert
Write an empty string if year is 0 in middle bedheight exporter.facet-metadata 2014-07-03, by Raimund Renkert
Updated german i18n string.facet-metadata 2014-07-03, by Raimund Renkert
Allow differences between years and epochs (accidentally did that in branch facet-metadata already too)2014-07-03, by Tom Gottfried
Allow differences between years and epochs.facet-metadata 2014-07-03, by Tom Gottfried
Fixed i18n strings.facet-metadata 2014-07-03, by Raimund Renkert
Avoid NPE if some meta data does not exist.facet-metadata 2014-07-03, by Raimund Renkert
Added i18n strings for middle bedheights.facet-metadata 2014-07-03, by Raimund Renkert
Added macro for middle bedheights for old calculations.facet-metadata 2014-07-03, by Raimund Renkert
Added i18n strings.facet-metadata 2014-07-03, by Raimund Renkert
Removed unused imports and avoid using RiverUtils.facet-metadata 2014-07-03, by Raimund Renkert
Fixed NPE when loading folders from datacage.facet-metadata 2014-07-03, by Raimund Renkert
Translate csv meta data lines in middle bed height chart export.facet-metadata 2014-07-03, by Raimund Renkert
Add river elevation model to middle bed height csv export.facet-metadata 2014-07-03, by Raimund Renkert
Fixed i18n strings.facet-metadata 2014-07-03, by Raimund Renkert
Add river elevation model to bed diff chart export.facet-metadata 2014-07-03, by Raimund Renkert
Allow building Release from specific branch. Beware that branches to not get different ports automatically.2014-07-02, by Tom Gottfried
Added missing facet.facet-metadata 2014-07-02, by Raimund Renkert
Add meta data to middle bed height CSV export.facet-metadata 2014-07-02, by Raimund Renkert
Added som more meta data to middle bed height result.facet-metadata 2014-07-02, by Raimund Renkert
Separate meta data key and value by ':'.facet-metadata 2014-07-02, by Raimund Renkert
Removed unused importsRemoved unused imports..facet-metadata 2014-07-02, by Raimund Renkert
Add meta data to chart series in sq relation.facet-metadata 2014-07-02, by Raimund Renkert
Add units as meta data to middle bed height facets.facet-metadata 2014-07-02, by Raimund Renkert
Updated meta data in facets.facet-metadata 2014-07-02, by Raimund Renkert
Split bed quality facets and updated processors and state.facet-metadata 2014-07-02, by Raimund Renkert
Removed debug output.facet-metadata 2014-07-02, by Raimund Renkert
Split bed differences facet into data specific facets.facet-metadata 2014-07-01, by Raimund Renkert
Bedheight facet now returns double[][]. Removed obsolete processor code.facet-metadata 2014-07-01, by Raimund Renkert
Moved MiddleBedHeight classes to minfo package. Facet now returns double[][] data.facet-metadata 2014-07-01, by Raimund Renkert
Fixed some smartgwt 4.1 related issues.2014-07-01, by Raimund Renkert
merged with default.facet-metadata 2014-06-30, by Raimund Renkert
Added tag 3.1.4 for changeset 6fef38a526c72014-06-27, by Tom Gottfried
There is no year/epoche choice anymore for bed differences.3.1.4 2014-06-27, by Tom Gottfried
Exclude annotation types without trailing unit (assumed after whitespace).2014-06-27, by Tom Gottfried
Removed obsolete XPath expression.2014-06-27, by Sascha L. Teichmann
Minor cleanup in meta-data.xml.2014-06-27, by Tom Gottfried
Select complete differences matrix to have a well sorted dc-tree.2014-06-27, by Raimund Renkert
Removed code that ignores a user subtitle and sets a default subtitle.2014-06-27, by Raimund Renkert
Fixed datacage info field for bed height differences.2014-06-27, by Raimund Renkert
merged.2014-06-26, by Raimund Renkert
Changed twin dc panel in bed height deifferences to single dc and use the new differences dc macro.2014-06-26, by Raimund Renkert
Updated macros and db statement for minfo bedheight differences.2014-06-26, by Raimund Renkert
Datacage function resolver: Declare static functions static.2014-06-26, by Sascha L. Teichmann
Added dc:coalesce(a, b). Returns first element which is not empty or not zero.2014-06-26, by Sascha L. Teichmann
Added dc:lowercase() dc:uppercase()2014-06-26, by Sascha L. Teichmann
Set identifier for listgridfields and resized columns.2014-06-25, by Raimund Renkert
issue1633: Add missing info line.2014-06-24, by Tom Gottfried
DC: Flatten bed height diff tree a bit.2014-06-20, by Sascha L. Teichmann
DC: Group bedheight diffs by both years.2014-06-20, by Sascha L. Teichmann
merged.2014-06-20, by Raimund Renkert
New macros for bed height differneces.2014-06-20, by Raimund Renkert
Datacage: Make it possible to group a value tuple into more than one group.2014-06-20, by Sascha L. Teichmann
Fixed river selection for interactive map.2014-06-20, by Raimund Renkert
i18n for WMS legend window title.2014-06-20, by Tom Gottfried
Added script to find unused i18n in *.java and *.xml files.2014-06-19, by Sascha L. Teichmann
Fixed last anomalie in i18n files.2014-06-19, by Sascha L. Teichmann
Removed more anomalies from i18n.2014-06-19, by Sascha L. Teichmann
Run native2ascii over i18n files.2014-06-19, by Sascha L. Teichmann
Fixed i18n string in other german translation.2014-06-19, by Tom Gottfried
Fixed i18n string in german translation.2014-06-19, by Raimund Renkert
This additional version of JFreeChart prevented diagrams to be drawn.2014-06-19, by Tom Gottfried
Remove obsolete generator references.2014-06-18, by Tom Gottfried
Avoid having to set VERSION in external script.2014-06-18, by Tom Gottfried
Override bad defaults of isc-maven-plugin. Please set DEFAULT_WD in make_release_sh to something individual if you are on a multi-user system.2014-06-18, by Tom Gottfried
Datacage: Moved year filtering of bed heights to separate macro to be reusable in other contextes.2014-06-18, by Sascha L. Teichmann
Use version-specific mapserver-URLs for release.2014-06-18, by Tom Gottfried
merged.2014-06-18, by Raimund Renkert
Fixed sediment load epoch input panel.2014-06-18, by Raimund Renkert
Fixed "pegelinfo"-wiki links.2014-06-18, by Raimund Renkert
Fixed date range input panels.2014-06-18, by Raimund Renkert
Fixed columns in location/distance helper panels.2014-06-18, by Raimund Renkert
Fixed compile errors for smartgwt 4.1.2014-06-18, by Raimund Renkert
Use SmartGWT version 4.1p. Updated release script to download SmartGWT.2014-06-18, by Raimund Renkert
Importer: document import of UUIDs.2014-06-18, by Tom Gottfried
issue1633: Add info lines in SQ-relation CSV export.2014-06-17, by Tom Gottfried
So you do not need to type every string twice.2014-06-17, by Tom Gottfried
Removed unnecessary container widgets and layouts.2014-06-17, by Raimund Renkert
Moved info stack section to top level widget (parameterlist).2014-06-17, by Raimund Renkert
Replaced plain gwt with smartgwt components in info panels.2014-06-17, by Raimund Renkert
Add unit for Q in SQ relation exports.2014-06-13, by Tom Gottfried
Include last year of epoch in calculation.2014-06-12, by Tom Gottfried
Small Java related cosmetics.2014-06-12, by Sascha L. Teichmann
Nasty little detail overlooked in last commit.2014-06-12, by Tom Gottfried
This guess was not always correct.2014-06-12, by Tom Gottfried
Add new DateUtil class.2014-06-12, by Tom Gottfried
Complete rev7925.2014-06-10, by Tom Gottfried
Importer: remove system property and documentation for bed height epochs.2014-06-10, by Tom Gottfried
SCHEMA CHANGE: Removed bed height epochs.2014-06-10, by Tom Gottfried
Removed bed differences epoch from datacage.2014-06-10, by Raimund Renkert
Removed datacage macro calls for bed height epochs.2014-06-06, by Raimund Renkert
Removed clientside filter for bed height epochs.2014-06-06, by Raimund Renkert
Removed obsolete bed height epoch files.2014-06-06, by Raimund Renkert
Removed serverside path for bed height epochs.2014-06-06, by Raimund Renkert
Removed bed height epoch in importer.2014-06-06, by Raimund Renkert
Make grain fraction type 'unknown' explicit and use it where appropriate.2014-06-05, by Tom Gottfried
Adapted bed differences PDF export to CSV export and some cleanup of field names.2014-06-04, by Tom Gottfried
flys/issue1628: Adjusted the PDF export.2014-06-04, by Sascha L. Teichmann
Change column order in bed differences export.2014-06-04, by Tom Gottfried
Added diff pair column to CSV export of bed height differences. TODO: same for PDF, adjust client.2014-06-04, by Sascha L. Teichmann
Allow differentiating between units of sediment sources/sinks in annotation types also in datacage.2014-06-04, by Tom Gottfried
Annotations are not points.2014-06-04, by Tom Gottfried
Added text color for annotation labels.2014-06-04, by Sascha L. Teichmann
Feed unit to PDF template.2014-06-03, by Sascha L. Teichmann
Fixed flys/issue1628. Made "unit" a configurable field in PDF export.2014-06-03, by Sascha L. Teichmann
Fixed typos in datacage manual.2014-06-01, by Sascha L. Teichmann
issue1628: correct unit and at least partly complete column name for CSV.2014-05-30, by Tom Gottfried
issue661: prototyped tooltip for porosities in datacage.2014-05-30, by Tom Gottfried
Potential fix for exception reported in flys/issue1717.2014-05-28, by Sascha L. Teichmann
Upgrade to SmartGWT 3.1 (bugfix Release) as this did at least not seem to cause any problems.2014-05-27, by Tom Gottfried
Potential fix for flys/issue1717: Draw manuel points on W or Q axis depending on the calculation.2014-05-26, by Sascha L. Teichmann
Fix for flys/issue1670: Introduce 100m gaps in single bed width.2014-05-26, by Sascha L. Teichmann
Added tag 3.1.3 for changeset 8333b9b06c982014-05-21, by Sascha L. Teichmann
Return NaN for width if no width exists for the requested station in bedheights data.3.1.3 2014-05-21, by Raimund Renkert
Added tag 3.1.3 for changeset e0d06f4edaa62014-05-21, by Raimund Renkert
Removed tag 3.1.132014-05-21, by Raimund Renkert
Added tag 3.1.13 for changeset 9d5385ccad072014-05-21, by Raimund Renkert
Use old version of iReport to generate binary compatible version of the PDF S/Q template.2014-05-21, by Sascha L. Teichmann
Added metadata to facets.facet-metadata 2014-05-21, by Raimund Renkert
Use the metadata to write csv header when exporting a chart.facet-metadata 2014-05-21, by Raimund Renkert
Add metadata to chart series and datasets.facet-metadata 2014-05-21, by Raimund Renkert
Added metadata to styled series.facet-metadata 2014-05-21, by Raimund Renkert
New class and interface for metadata in chart series and datasets.facet-metadata 2014-05-21, by Raimund Renkert
Fix flys/issue1719: s@Abflusskurve/-tafel@Modell-Abflusskurve/-tafel@2014-05-21, by Sascha L. Teichmann
Use the new way of building static facets if such facets exist else ignore this way.2014-05-19, by Raimund Renkert
Added tag 3.1.3 for changeset 952b57b43e2f2014-05-16, by Tom Gottfried
Importer: depths are always numbers assumed to represent centimeters.2014-05-16, by Tom Gottfried
Removed trailing whitespace.2014-05-16, by Sascha L. Teichmann
Removed trailing whitespace.2014-05-16, by Sascha L. Teichmann
Removed trailing whitespace.2014-05-16, by Sascha L. Teichmann
Add porosity importer to helper script.2014-05-16, by Tom Gottfried
Use description from database for i18n (completed revision dc8910e29dd4).2014-05-16, by Raimund Renkert
PorosityParser: Strip file extension for description.2014-05-16, by Tom Gottfried
Number an unit have to separated by whitespace.2014-05-16, by Tom Gottfried
i18n for porosities (needs to be filled with data).2014-05-16, by Tom Gottfried
Fixed subtitle handling and added flowvelocity subtitle.2014-05-16, by Raimund Renkert
merged.2014-05-16, by Raimund Renkert
Changed column names in sounding select state ui.2014-05-16, by Raimund Renkert
flys/issue1716: Adjusted installation from binaries.2014-05-15, by Sascha L. Teichmann
Issue1308 Forgot to rename columns.2014-05-15, by Sascha L. Teichmann
Corrected wording for moving average.2014-05-14, by Tom Gottfried
Added importer documentation for porosity data.2014-05-14, by Raimund Renkert
Backed out changeset 0c88a5d30ca2facet-metadata 2014-05-14, by Raimund Renkert
Added importer documentation for porosity data.facet-metadata 2014-05-14, by Raimund Renkert
merged.2014-05-13, by Raimund Renkert
Removed step back button for river selection. Fix/Workarround for issue 1203/1714.2014-05-13, by Raimund Renkert
Precision and scale have to be set to represent integers with NUMBER; DOUBLE PRECISION is preferable for floating point (see issue1304).2014-05-13, by Tom Gottfried
Removed obsolete import.2014-05-08, by Sascha L. Teichmann
merged.2014-05-08, by Raimund Renkert
Updated oracle minfo schema (added porosity).2014-05-08, by Raimund Renkert
Fixed porosity importer. Find existing db entries and parse values from string, not via double.2014-05-08, by Raimund Renkert
Fixed getPeer for depth. Select with a small epsilon, not extact match.2014-05-08, by Raimund Renkert
Order porosities by station.2014-05-08, by Raimund Renkert
Fixes flys/issue1308. Add new column "Messstellenart" in "Messstellen-Info".2014-05-06, by Sascha L. Teichmann
Preparation for flys/issue1643: Introduced four new annotation types:2014-05-06, by Sascha L. Teichmann
Fixed some whitespace in annotation classifier xml.2014-05-06, by Sascha L. Teichmann
Fix for flys/issue1635: Added legend for table. TODO: Adjust english template. BTW: Who threw the original templates away?2014-05-05, by Sascha L. Teichmann
Fixed imports and make it build again.2014-04-30, by Sascha L. Teichmann
Removed obsolete imports.2014-04-30, by Sascha L. Teichmann
merged.2014-04-30, by Raimund Renkert
Added cache key class for porosity.2014-04-30, by Raimund Renkert
New macro for porosities in datacage config.2014-04-30, by Raimund Renkert
Added porosity facet to minfo artifact config.2014-04-30, by Raimund Renkert
Added config for porosity artifact.2014-04-30, by Raimund Renkert
Handle porosity facets in a processor.2014-04-30, by Raimund Renkert
Added new facet to facettypes.2014-04-30, by Raimund Renkert
New Facet, datatype and data factory for porosities.2014-04-30, by Raimund Renkert
Build static facets in D4EArtifact.2014-04-30, by Raimund Renkert
Removed name and getter for name (Moved to DefaultArtifact).2014-04-30, by Raimund Renkert
D4EArtifact is no longer abstract.2014-04-30, by Raimund Renkert
Updated signature of artifacts setup method; Removed unnecessary setup overrides.2014-04-30, by Raimund Renkert
Parse and import porosities.2014-04-30, by Raimund Renkert
Added model, parser and importer for porosities.2014-04-30, by Raimund Renkert
Added tables for porosity and porosity values to postgres schema.2014-04-30, by Raimund Renkert
Bring date format on par with server format. Hopefully fixes flys/issue1445.2014-04-25, by Sascha L. Teichmann
Use correct URL from config files in release script.2014-04-17, by Tom Gottfried
Close branch minfo-opt as it is now merged to default.minfo-opt 2014-04-17, by Tom Gottfried
Merged minfo-opt branch into default.2014-04-17, by Tom Gottfried
Draw lines with gaps for sounding width, and bed heights.minfo-opt 2014-04-03, by Raimund Renkert
Avoid NPE in sounding select state if no year is set for bed heights.minfo-opt 2014-04-03, by Raimund Renkert
Added i18n stings for morph active width.minfo-opt 2014-03-28, by Raimund Renkert
Added new columns for morph active width.minfo-opt 2014-03-28, by Raimund Renkert
Add new facet for morph active width to bed height difference calculation.minfo-opt 2014-03-28, by Raimund Renkert
Added morph. active width to bed height difference calculation.minfo-opt 2014-03-28, by Raimund Renkert
Renamed the incorrectly named morph width to sounding width.minfo-opt 2014-03-27, by Raimund Renkert
Added GNU Affero General Public License text to DiveElements/River.2014-03-27, by Sascha L. Teichmann
Display the additional information extracted from multiattribute data.minfo-opt 2014-03-20, by Raimund Renkert
Added the new multiattribute data type.minfo-opt 2014-03-20, by Raimund Renkert
New method to extract multi attribute data.minfo-opt 2014-03-20, by Raimund Renkert
Add additional data in soundigs select state.minfo-opt 2014-03-20, by Raimund Renkert
Changed state datatype for soundings select state.minfo-opt 2014-03-20, by Raimund Renkert
Added new state data type.minfo-opt 2014-03-20, by Raimund Renkert
Fixed WSPLGEN classes. Allow 0 for 'to' in differences.2014-03-19, by Raimund Renkert
Use the sediment yield kind to get data to avoid mixing epoch with off. epoch data.minfo-opt 2014-03-12, by Raimund Renkert
Mention DIPS field-names in ETL-README.2014-03-18, by Tom Gottfried
Use new OSM-WMS.2014-03-17, by Tom Gottfried
Release script broke with r7814:242e790fb4ee.2014-03-17, by Tom Gottfried
Added tag 3.1.2 for changeset 242e790fb4ee2014-03-07, by Sascha L. Teichmann
More fixes for the Free Software installation.3.1.2 2014-03-07, by Sascha L. Teichmann
Replace model uuid of 'Beispielfluss' with model_uuid of 'Elbe'.2014-03-07, by Raimund Renkert
Added apache example config, updated install doku.2014-03-07, by Raimund Renkert
Added images and html references for inactive rivers: Rhein, Oder.2014-03-07, by Raimund Renkert
Changed model uuid of 'Elbe' to model uuid of 'Beispielfluss'.2014-03-07, by Raimund Renkert
Added i18n strings for chart subtitle.minfo-opt 2014-03-07, by Raimund Renkert
Calculate the zoom dependent radius and add the informations to chart subtitle.minfo-opt 2014-03-07, by Raimund Renkert
Concatenate the subtitle parts and add them to the default subtitle.minfo-opt 2014-03-07, by Raimund Renkert
Added subtitle parts to modify the chart subtitle via the outprocessor.minfo-opt 2014-03-07, by Raimund Renkert
Use the updated default subtitle or the 'old' one from chart settings.minfo-opt 2014-03-07, by Raimund Renkert
Add extra config files for modules and zoom scales and give option to use custom files for release.2014-03-06, by Tom Gottfried
INSTALL_DE: use useradd with defaults.2014-03-06, by Tom Gottfried
INSTALL_DE: more small improvements and corrections.2014-03-06, by Tom Gottfried
Remove not publicly available WMS services and enable custom configuration through release script.2014-03-06, by Tom Gottfried
Remove obsolete MapServer stuff.2014-03-06, by Tom Gottfried
Remove obsolete WSPLGEN binary.2014-03-06, by Tom Gottfried
Ignore python byte code.2014-03-06, by Tom Gottfried
Use latest WSPLGEN binary.2014-03-06, by Tom Gottfried
Added i18n strings for winfo difference facet names.minfo-opt 2014-03-06, by Raimund Renkert
Fixed datacage macro for winfo differences and added the new facet.minfo-opt 2014-03-06, by Raimund Renkert
Mapped a theme for the new differences facet.minfo-opt 2014-03-06, by Raimund Renkert
Add the new facet to drawable facets.minfo-opt 2014-03-06, by Raimund Renkert
Add the new difference facet and set facets active/inactive.minfo-opt 2014-03-06, by Raimund Renkert
Added new facet for filtered winfo differences.minfo-opt 2014-03-06, by Raimund Renkert
Added default zoom scales.minfo-opt 2014-03-06, by Raimund Renkert
Try to load default zoom scales if no zoom scale defined for the current river.minfo-opt 2014-03-06, by Raimund Renkert
INSTALL_DE: more small improvements and corrections.2014-03-05, by Tom Gottfried
Set useful DB connection configuration for demo installation.2014-03-05, by Tom Gottfried
INSTALL_DE: small corrections and (hopefully) improvements.2014-03-05, by Tom Gottfried
INSTALL_DE: we don't want links to internalt sites and to build WSPLGEN2014-03-05, by Tom Gottfried
INSTALL_DE: install Java 7 prior to tomcat to avoid Java 6 installation.2014-03-05, by Tom Gottfried
Useful server-logging for demo installation.2014-03-05, by Tom Gottfried
Set appropriate client log-file for demo installation.2014-03-04, by Tom Gottfried
INSTALL_DE: remove obsolete server configuration.2014-03-04, by Tom Gottfried
Remove FLYS-specific stuff from map configuration and allow to give a custom files in release script.2014-03-04, by Tom Gottfried
INSTALL_DE: remove obsolete client configuration.2014-03-04, by Tom Gottfried
Remove FLYS-specific stuff from config.yaml and allow to give a custom file in release script.2014-03-04, by Tom Gottfried
Set print URL to useful value for demo installation.2014-03-04, by Tom Gottfried
INSTALL_DE: mention tested system and simplify dependency installation.2014-03-04, by Tom Gottfried
Defaulting to GGinA authentication in release script instead of client sources.2014-03-04, by Tom Gottfried
Replace FLYS-specific features.xml.2014-03-04, by Tom Gottfried
merged.2014-03-03, by Raimund Renkert
Validate waterlevel 'to' value on change.2014-03-03, by Raimund Renkert
Change to work dir bevor creating artifacts and datacage db2014-03-03, by Andre Heinecke
merged.2014-03-03, by Raimund Renkert
Added german INSTALL.2014-03-03, by Raimund Renkert
Changed directory variable in h2 create scripts.2014-03-03, by Raimund Renkert
Removed obsolete imports.2014-02-27, by Sascha L. Teichmann
merged.2014-02-27, by Raimund Renkert
Replaced river names with model_uuid for available rivers.2014-02-27, by Raimund Renkert
Use river model_uuid to identify rivers.2014-02-27, by Raimund Renkert
Replaced hard coded rivers with rivers loaded from module service.2014-02-27, by Raimund Renkert
Use the river model_uuid as value for data items.2014-02-27, by Raimund Renkert
Load modules with supported rivers and rivers with model_uuid.2014-02-27, by Raimund Renkert
Added list to module to store supported rivers.2014-02-27, by Raimund Renkert
Added model_uuid to river info.2014-02-27, by Raimund Renkert
Added model_uuid to river model.2014-02-27, by Raimund Renkert
Added rivers to each module.2014-02-27, by Raimund Renkert
Read rivers supported by a module from config file.2014-02-27, by Raimund Renkert
Added list of rivers a module supports.2014-02-27, by Raimund Renkert
Replaced river name with model_uuid as value in RiverSelect state.2014-02-27, by Raimund Renkert
Include river model_uuid in RiverService.2014-02-27, by Raimund Renkert
Include river model_uuid in RiverInfoService.2014-02-27, by Raimund Renkert
Parse and import model_uuid for rivers.2014-02-27, by Raimund Renkert
Added model_uuid column to river model.2014-02-27, by Raimund Renkert
Add german howto to describe how to set up putty / wald and mercurial on windows2014-02-24, by Andre Heinecke
Hopefully a cleaner fix for flys/issue1549 using the FloatRangeValidator from SmartGWT to verify that the 'to' field stays positive.2014-02-21, by Sascha L. Teichmann
Partial fix issue1532: at least clone artifacts data when cloning2014-02-11, by Felix Wolfsteller
Upcoming issue1532: Extracted method where 'cloning/initialize' takes place.2014-02-11, by Felix Wolfsteller
issue1549: Add live-validation to wsplgen to-field.2014-02-11, by Felix Wolfsteller
issue765: When creating a WMSLayerFacet copy, also copy original2014-02-07, by Felix Wolfsteller
Schema correction following yesterday's brain failure.2014-02-07, by Tom Gottfried
merged2014-02-06, by Tom Gottfried
SCHEMA CHANGE: renamed uuid-column to avoid collision with data type.2014-02-06, by Tom Gottfried
Implement deepCopy on WMSLayerFacet WMSDBLayerFacet and WSPLGENLayerFacet2014-02-06, by Felix Wolfsteller
SCHEMA CHANGE: Add UUIDs to rivers.2014-02-06, by Tom Gottfried
(issue1692) Ãberarbeitetes Init script2014-02-04, by Andre Heinecke
This was obsolete since r5294.2014-01-31, by Tom Gottfried
Server side validation for flys/issue1549.2014-01-23, by Sascha L. Teichmann
Cross section importer: avoid logging of unused feature.2014-01-22, by Tom Gottfried
Close branch slt-simplify-cross-sections.slt-simplify-cross-sections 2014-01-22, by Tom Gottfried
Merge slt-simplify-cross-sections branch into default.2014-01-22, by Tom Gottfried
Merged2014-01-20, by Sascha L. Teichmann
Client side fix for flys/issue15492014-01-20, by Sascha L. Teichmann
Merged default into slt-simplify-cross-sections branch and updated package and class names.slt-simplify-cross-sections 2014-01-20, by Tom Gottfried
Add .jar to hgignore.2014-01-20, by Tom Gottfried
Importer: fix logging in import_river.sh.2014-01-16, by Tom Gottfried
Removed obsolete imports. Fixed Logger in SQ measurement.2014-01-13, by Sascha L. Teichmann
Added tag 3.1.1 for changeset 837b620b58b42013-12-20, by Andre Heinecke
Removed tag 3.1.13.1.1 2013-12-20, by Andre Heinecke
Fix doOut for Porosity sublayer2013-12-20, by Andre Heinecke
Make GAP_TOLERANCE static2013-12-20, by Andre Heinecke
(issue1502) Allow annotation handling to be overwritten2013-12-20, by Andre Heinecke
Remove extremly spammy debug output2013-12-20, by Andre Heinecke
Added tag 3.1.1 for changeset 20b4dd8a47eb2013-12-20, by Andre Heinecke
Removed tag 3.1.12013-12-20, by Andre Heinecke
Fix compilation of the AreaData change.2013-12-20, by Andre Heinecke
Added tag 3.1.1 for changeset aa5ad2f62def2013-12-20, by Andre Heinecke
Areas are not Volumes!2013-12-20, by Andre Heinecke
(issue1574) Add correction curves to W Area compatibility lists2013-12-20, by Andre Heinecke
(issue1574) Add area handling for correction curves2013-12-20, by Andre Heinecke
(issue1622) Paint W Differences on diffW Axis2013-12-19, by Andre Heinecke
(issue1622) Allow areas with w_differences2013-12-19, by Andre Heinecke
Only show 3 as we are 3.1.x now2013-12-19, by Andre Heinecke
S/Q relation be more correct with judgment if a sieve is correct. Needs load and diameter.2013-12-19, by Sascha L. Teichmann
S/Q relation removed false COALSCE from SQL statement. Removed misplaced sieve adjustment.2013-12-18, by Sascha L. Teichmann
S/Q relation: Adjust sieves only once during construction.2013-12-18, by Sascha L. Teichmann
Variance is defined as the sum of squared differences.2013-12-18, by Tom Gottfried
(issue1594) Get the correct differences data2013-12-18, by Andre Heinecke
(issue1594) Move Bed differences absolute height into the correct processor2013-12-17, by Andre Heinecke
SQ relation: only take sieve which have values at all.2013-12-17, by Sascha L. Teichmann
(issue1577, issue1494) Wrap wst name depending on Q > 02013-12-17, by Andre Heinecke
(issue1581) Remove Minfo-heights from differencable2013-12-17, by Andre Heinecke
(issue1579) Add Hack to not syncronize and add second axis in static GaugeDischarge2013-12-16, by Andre Heinecke
(issue1559) Improve Exception handling and allow null titles2013-12-16, by Andre Heinecke
Removed obsolete imports.2013-12-16, by Sascha L. Teichmann
SQ Relation: Added CSV dumping to raw SedDB query results.2013-12-16, by Sascha L. Teichmann
(issue1649) Remove broken getWKms from RiverUtils and use WDifferencesState instead2013-12-16, by Andre Heinecke
(issue1649) Better check for waterlevel data and accept wkms data2013-12-16, by Andre Heinecke
Removed obsolete imports.2013-12-16, by Sascha L. Teichmann
Add Override marker and fix indention2013-12-16, by Andre Heinecke
(issue1596) Sort Export of Middle bedHeight2013-12-16, by Andre Heinecke
(issue1596) Make MiddleBedHeightData comparable2013-12-16, by Andre Heinecke
(issue1579) Fix axes syncronisation at Gauges2013-12-13, by Andre Heinecke
Fix build by removing bedheightsoundingprocessor from old Longitundinal Generator2013-12-13, by Andre Heinecke
(issue1225) Unify "Width" processor2013-12-13, by Andre Heinecke
(issue1632) Use DOS line endings2013-12-12, by Andre Heinecke
(issue1666) Calculate wRow after rounding the first value.2013-12-12, by Andre Heinecke
issue1577: Add W-Wrapping of wst-names in WKmsFactory if kind is one2013-12-12, by Felix Wolfsteller
(issue1614) Handle NaN in Styled Series created by SedimentLoadProcessors2013-12-11, by Andre Heinecke
Remove obsolete Sedimentload class to avoid confusion2013-12-11, by Andre Heinecke
issue1594/issue1603: Put bed_differences to correct axis.2013-12-11, by Felix Wolfsteller
Extracted method.2013-12-11, by Felix Wolfsteller
issue1574: Also allow area creation for longitudinal_discharge_sections.2013-12-10, by Felix Wolfsteller
issue1547: Add more facets to lists of facets with which areas can be created.2013-12-10, by Felix Wolfsteller
issue1574: Set target out for area artifact at creation time.2013-12-10, by Felix Wolfsteller
issue1542: I18n change.2013-12-10, by Felix Wolfsteller
dc:sort: Removed unnecessary if check. Forgot to push before tag.2013-12-09, by Sascha L. Teichmann
Cosmetics, doc.2013-12-09, by Felix Wolfsteller
issue1020: Show official lines in datacage to compute uesks, too.2013-12-09, by Felix Wolfsteller
Added tag 3.1.0 for changeset 28f287e842962013-12-06, by Andre Heinecke
Removed tag 3.1.03.1.0 2013-12-06, by Andre Heinecke
(issue1474) Change order of measurement stations2013-12-06, by Andre Heinecke
Added tag 3.1.0 for changeset 03dc5cc22e262013-12-06, by Andre Heinecke
Update coefficients in porosity formula.2013-12-06, by Tom Gottfried
Datacage: Added <dc:sort>2013-12-06, by Sascha L. Teichmann
issue1688: In flow velocity, discharges are now initially inactive.2013-12-06, by Felix Wolfsteller
Order by years in SQ-relation datacage.2013-12-06, by Tom Gottfried
Order by year in sediment yield datacage.2013-12-06, by Tom Gottfried
Add sources/sinks to sediment yield datacage.2013-12-06, by Tom Gottfried
Add recommendations for bed quality and flow velocity.2013-12-06, by Tom Gottfried
Use correct quotes for long names2013-12-06, by Andre Heinecke
issue1691: Sedimentload-fetching via datacage now picks right facet.2013-12-06, by Felix Wolfsteller
Removed obsolete import.2013-12-06, by Sascha L. Teichmann
Fix.2013-12-06, by Felix Wolfsteller
issue1020: Do not write Q-Lines with wstwriter from floodmapstate.2013-12-06, by Felix Wolfsteller
issue1020: WstWriter: Add flag to ignore Qs alltogether.2013-12-06, by Felix Wolfsteller
Improved logging.2013-12-05, by Felix Wolfsteller
Cosmetics of WstWriter. Actually, a decent class now.2013-12-05, by Felix Wolfsteller
Do not NPE if there is a folder without mapfiles in the shapefile path2013-12-05, by Andre Heinecke
(issue1620) Fix WstWriter Column Header format.2013-12-05, by Andre Heinecke
issue1020 and others: Let StaticWQKmsState spawn other facets, implement computeAdvance.2013-12-05, by Felix Wolfsteller
Doc.2013-12-05, by Felix Wolfsteller
Doc.2013-12-05, by Felix Wolfsteller
Doc.2013-12-05, by Felix Wolfsteller
Whitespace-cosmetics.2013-12-05, by Felix Wolfsteller
issue1020: Add WQ constructor that accepts TDoubleArrayList .2013-12-05, by Felix Wolfsteller
issue1020: When preparing wsts for wsplgen handle other than standard wqkms calculations.2013-12-05, by Felix Wolfsteller
issue1020: Cosmetics.2013-12-05, by Felix Wolfsteller
issue1020: Make WQKms able to build from WKms.2013-12-05, by Felix Wolfsteller
Added two comments about improvements.2013-12-04, by Felix Wolfsteller
Whitespace.2013-12-04, by Felix Wolfsteller
Improve logger output.2013-12-04, by Felix Wolfsteller
(issue1610) Add units also for _de2013-12-03, by Andre Heinecke
flys/issue1638: Calculate ntot correctly.2013-12-03, by Sascha L. Teichmann
Removed obsolete imports.2013-12-03, by Sascha L. Teichmann
issue1020: Avoid some traps, use WKms and handle data from StaticArtifact.2013-12-03, by Felix Wolfsteller
issue1020: Do not set a data with value null, this breaks stuff further2013-12-03, by Felix Wolfsteller
issue1020: Handle FixRealizingResult for UESK waterlevel-selection.2013-12-03, by Felix Wolfsteller
(issue1632) Use correct l10n for unit2013-12-03, by Andre Heinecke
(issue1632) Add Unit to CSV export2013-12-03, by Andre Heinecke
(issue1630) Flush the correct outer output stream2013-12-03, by Andre Heinecke
issue1043: Add i18n for 'dm'.2013-12-02, by Felix Wolfsteller
issue1043: Add 'dm' type.2013-12-02, by Felix Wolfsteller
issue1043: Fetch 'dm'-values in QualityMeasurementFactory.2013-12-02, by Felix Wolfsteller
issue1043: Add 'dm' to types enum in BedQualityDiameterResult.2013-12-02, by Felix Wolfsteller
issue1630: Fix column calculation for bed quality values.2013-12-02, by Felix Wolfsteller
Doc.2013-12-02, by Felix Wolfsteller
BedQualityExporter: Continue/exit early when no results.2013-12-02, by Felix Wolfsteller
Refactoring: extracted method2013-12-02, by Felix Wolfsteller
issue1579: Load those official lines automatically.2013-12-02, by Felix Wolfsteller
issue1579: ComputedDischargeCurveGenerator: Handle WQKms data.2013-12-02, by Felix Wolfsteller
Whistespace.2013-12-02, by Felix Wolfsteller
issue1579: Added macro to load interpolated official lines.2013-12-02, by Felix Wolfsteller
Use IsOfficialAccess instead of direct property in WaterlevelExporter.2013-11-29, by Felix Wolfsteller
Remove close-isOfficial-Handling in StaticWQKmsArtifact.2013-11-29, by Felix Wolfsteller
Added new IsOfficalAccess to avoid keeping data too close to StaticWQKmsArtifact.2013-11-29, by Felix Wolfsteller
Avoid certain exception, added todo about issues with implementation.2013-11-29, by Felix Wolfsteller
Fix doc/debug.2013-11-28, by Felix Wolfsteller
(issue1620) join column names with two empty spaces2013-11-29, by Andre Heinecke
(issue1620) Print the real official Q value instead of the first2013-11-29, by Andre Heinecke
BedQualityExporter: Use foreach instead of manual array loop.2013-11-28, by Felix Wolfsteller
BedQualityExporter: Fix ancient i/j variable mix-up.2013-11-28, by Felix Wolfsteller
BedQualityExporter: Refactoring.2013-11-28, by Felix Wolfsteller
Cosmetics, removed obsolete code.2013-11-28, by Felix Wolfsteller
Cosmetics, doc fix.2013-11-28, by Felix Wolfsteller
(issue1611) Correct i18n property for axis label2013-11-27, by Andre Heinecke
(issue1667) Remove duplicate points in the same series in Diagram CSV export2013-11-27, by Andre Heinecke
(issue1666) Update CSV link in updateLinks, too2013-11-27, by Andre Heinecke
(issue1560) Fix off by one error in ATWriter causing the last value to be omitted.2013-11-27, by Andre Heinecke
(issue1620) Add export of official lines in WST as specified2013-11-27, by Andre Heinecke
(issue1225) Use label code also when only one item is present2013-11-25, by Andre Heinecke
issue1596: Store table (cell) data twice: Once as (formatted) string2013-11-27, by Felix Wolfsteller
Typo fix in doc.2013-11-27, by Felix Wolfsteller
issue1596: include river wst unit in csv header for middle bed height.2013-11-27, by Felix Wolfsteller
issue1596: Add unit to middlebedheight csv header.2013-11-27, by Felix Wolfsteller
Remove uneccessary debug output added in last commit.2013-11-25, by Andre Heinecke
(issue1225) Implement Magic labels.2013-11-25, by Andre Heinecke
(issue1225) Unify Height BedHeight and W axis2013-11-25, by Andre Heinecke
issue1558: Allow fixed axis for timeseries-diagrams.2013-11-21, by Felix Wolfsteller
Add isValid method for single double arrays2013-11-21, by Andre Heinecke
Rename the Global Facet filter to reduce ambiguity with the old facet filter2013-11-21, by Andre Heinecke
Add timestamp type2013-11-21, by Andre Heinecke
issue1225 Add i18n for bedheight and use wst height system as unit2013-11-21, by Andre Heinecke
Allow more compact display of mainvalue-table.2013-11-20, by Felix Wolfsteller
issue1542: Profit from refactoring, use same columns/fields for QDTable.2013-11-20, by Felix Wolfsteller
issue1542: Only show year of date for mainvalues validity, refactoring.2013-11-20, by Felix Wolfsteller
issue1542: Reorder columns for main value validity dates.2013-11-20, by Felix Wolfsteller
issue1613: added accidentally omitted i18n.2013-11-20, by Felix Wolfsteller
issue1597: Re-enable w/q points in DischargeProcessor. It's yet unclear why it was disabled.2013-11-19, by Felix Wolfsteller
Renamed winfo variable to more fitting name artifact.2013-11-19, by Felix Wolfsteller
issue1606: Handle annotation text as well.2013-11-19, by Felix Wolfsteller
issue1606: Added methods to parse omitted theme properties.2013-11-19, by Felix Wolfsteller
issue1606: Handle textstyle property in clients StyleEditorWindow.2013-11-19, by Felix Wolfsteller
issue1063: Always create data for all parameters, even if not specified.2013-11-18, by Felix Wolfsteller
issue1063: Expose column names in ParameterMatrix.2013-11-18, by Felix Wolfsteller
Add i18n for SQ-Outliermethod help-URL.2013-11-18, by Tom Gottfried
Add units to flow velocity export headers.2013-11-18, by Tom Gottfried
issue1613: In DC, also show the 'diff' facets, define former calc. for hist. W/Q out.2013-11-18, by Felix Wolfsteller
issue1631: Allow loading of some former historical-discharge facets.2013-11-18, by Felix Wolfsteller
Doc.2013-11-14, by Felix Wolfsteller
Builder: Slightly more verbose errormessage.2013-11-14, by Felix Wolfsteller
issue1020: Display more waterlevels for uesk.2013-11-14, by Felix Wolfsteller
issue1020: In WaterlevelSelectState create label more differentiated at2013-11-14, by Felix Wolfsteller
issue1020: Let WspDatacagePanel also handle non-winfo (prev. calc) rec.2013-11-14, by Felix Wolfsteller
issue1020: Added pointers as comments in code.2013-11-14, by Felix Wolfsteller
Fix i18n.2013-11-13, by Felix Wolfsteller
issue1611,1046: Adjusted i18n for tau.2013-11-13, by Felix Wolfsteller
issue1592: Fix csv headers for w or q calculations.2013-11-13, by Felix Wolfsteller
issue1542: Include validity also in qdtable, reorder code, widen column width.2013-11-13, by Felix Wolfsteller
issue1542: Sweeten i18n.2013-11-13, by Felix Wolfsteller
flys/issue1503: Evil hack to force loaded of data to be bound to 'w_differences'. TODO: Remove all the broken code from DataCageTwinPanel.2013-11-12, by Sascha L. Teichmann
issue1542: Do not show link to w/q value view if no mainvalues are there.2013-11-12, by Felix Wolfsteller
issue1542: Let client to i18n and formatting of dates.2013-11-12, by Felix Wolfsteller
issue1542: WQInfoObjectImpl: Changed implementation from String to Date.2013-11-12, by Felix Wolfsteller
issue1542: WQInfoObject: Changed properties from String to Date.2013-11-12, by Felix Wolfsteller
issue1542: Added i18n for start/stoptimes of main values.2013-11-12, by Felix Wolfsteller
issue1542: Make WQInfoObjects and server provide start and end date for mainvalues, display in table.2013-11-12, by Felix Wolfsteller
Typo fix in debug output.2013-11-12, by Felix Wolfsteller
issue1542: Let MainValues have localized dates.2013-11-12, by Felix Wolfsteller
Add start- and stoptime to WQInfoObjects.2013-11-12, by Felix Wolfsteller
issue1542: Add timeinterval-data to mainvalues made available via service.2013-11-12, by Felix Wolfsteller
Doc, cosmetics.2013-11-12, by Felix Wolfsteller
Removed obsolete method.2013-11-11, by Felix Wolfsteller
Minor refactoring for future readability and refactoring.2013-11-11, by Felix Wolfsteller
Previous fix for flys/issue1675 was broken. :-/2013-11-12, by Sascha L. Teichmann
Workaround for flys/issue1675: Guarantee that the years are always between 0 and 9999 in macro 'minfo-heights'.2013-11-12, by Sascha L. Teichmann
Added tag 3.0.18 for changeset b82750667e1a2013-11-08, by Sascha L. Teichmann
Some i18n for Vollmer curve calculation.3.0.18 2013-11-08, by Sascha L. Teichmann
More on flys/issue1585: Do not fill circle for interpolated W/Q points.2013-11-08, by Sascha L. Teichmann
Fix i18n (missing closing bracket).2013-11-08, by Felix Wolfsteller
issue1762: correct facet names.2013-11-08, by Felix Wolfsteller
issue1585: Part 2/2 of patch from Sascha Teichmann to define datapoint shapes.2013-11-08, by sascha teichmann
issue1585: Part 1/2 of patch from Sascha Teichmann to define shape for datapoints.2013-11-08, by sascha teichmann
Fixed logger instantiations that were done with wrong class.2013-11-08, by Felix Wolfsteller
Added spooky ruby script to get started fixing logger instances of wrong classes.2013-11-08, by Felix Wolfsteller
Whacky little script to find possibly wrong loggers.2013-11-08, by Felix Wolfsteller
Add units to bedquality exporter columns.2013-11-07, by Tom Gottfried
Change column name in bedheight export.2013-11-07, by Tom Gottfried
Fix column names in flow velocity export.2013-11-07, by Tom Gottfried
issue1512: i18n.2013-11-07, by Felix Wolfsteller
Cosmetics, break overlong lines.2013-11-07, by Felix Wolfsteller
Doc.2013-11-07, by Felix Wolfsteller
Cosmetics.2013-11-07, by Felix Wolfsteller
SedimentLoadAccess: Slightly improved readability.2013-11-07, by Felix Wolfsteller
issue1658: Do not store Access in State.2013-11-07, by Felix Wolfsteller
Fix SedimentLoadAccess logger instance.2013-11-07, by Felix Wolfsteller
Simplified code.2013-11-06, by Sascha L. Teichmann
Removed obsolete facet for fix events in vollmer curve.2013-11-06, by Sascha L. Teichmann
Part fix for flys/issue1585: Use result from fitting to display interpolated W/Q points, too. TODO: Draw interpolated as circles.2013-11-06, by Sascha L. Teichmann
issue1664: Let DC instruct StaticWKmsArtifact to spawn facets2013-11-06, by Felix Wolfsteller
issue1664: Add new Processors to old axis and map them in longitudinal-diagram-defaults.2013-11-06, by Felix Wolfsteller
issue1664: Prepare new Facets to go to different axis (for wkms from fixa/diffs).2013-11-06, by Felix Wolfsteller
issue1658: Fix fine_middle epoch facet name.2013-11-06, by Felix Wolfsteller
issue1658: Adjuste facet descriptions to include unit.2013-11-04, by Felix Wolfsteller
issue1658: Add unit name to facet description.2013-11-04, by Felix Wolfsteller
issue1658: i18n for upcoming sediment load facet names (including t/a or m^3/a).2013-11-04, by Felix Wolfsteller
issue1658: Fix theme styles for sediment load (t/a and m^3/a) facets.2013-11-04, by Felix Wolfsteller
issue1663: Fix. HistoricalDischargeFacet transmorphed to WaterlevelFacet when cloned.2013-11-04, by Felix Wolfsteller
Merged2013-11-04, by Sascha L. Teichmann
Added tag 3.0.17 for changeset 6072463150092013-11-04, by Sascha L. Teichmann
Removed tag 3.0.172013-11-04, by Sascha L. Teichmann
Added tag 3.0.17 for changeset e97867879a452013-11-04, by Sascha L. Teichmann
Removed obsolete imports.2013-11-01, by Sascha L. Teichmann
WOutProcessor: Reorder statements so that function-call-debug-msg comes first.2013-11-01, by Felix Wolfsteller
White-space cosmetics.2013-11-01, by Felix Wolfsteller
cosmetics - full stop.2013-11-01, by Felix Wolfsteller
cosmetics, doc.2013-11-01, by Felix Wolfsteller
Whitespace-cosmetics.2013-11-01, by Felix Wolfsteller
issue1658: Fix SedimentLoadLSGenerator (with surprise: isnt that done via processors?).2013-11-01, by Felix Wolfsteller
Remove now obsolete SedimentLoadProcessor.2013-11-01, by Felix Wolfsteller
issue1658: New Processors for t/a and m^3/a -axis (stripped down from SedimentLoadProcessor).2013-11-01, by Felix Wolfsteller
issue1658: Handle new Facet-Types for SedimentLoad.2013-11-01, by Felix Wolfsteller
issue1658: Adjust Facet to new facet-types (t/a and m^3/a).2013-11-01, by Felix Wolfsteller
issue1658: Define new FacetTypes and IS functions.2013-11-01, by Felix Wolfsteller
issue1658: Let SedimentYieldArtifact create facet based on Sed.L. unit.2013-11-01, by Felix Wolfsteller
issue1658: Have SedimentLoadFactory deliver unit name for given id.2013-11-01, by Felix Wolfsteller
issue1658: Instead of one SedimentLoad-Axis, have two (t/a, m^3/a).2013-11-01, by Felix Wolfsteller
issue1658: Prepare minfo-artifact (.xml) to output t/a and m^3/a facets.2013-11-01, by Felix Wolfsteller
Datacage: Removed macro "delta-wt-ls" from meta-data.xml as it is not used.3.0.17 2013-11-01, by Sascha L. Teichmann
Fixed half broken interpolation code for lines to 'Dauerlinie'.2013-11-01, by Sascha L. Teichmann
meta-data.xml: Removed junk.2013-11-01, by Felix Wolfsteller
issue1571: Exclude vollmer curves from general longitudinal dc folder.2013-11-01, by Felix Wolfsteller
issue1571: Hav eown folder in dc for vollmer curves.2013-11-01, by Felix Wolfsteller
issue1571: i18n.2013-11-01, by Felix Wolfsteller
Removed redundant lookup for km in call context.2013-11-01, by Sascha L. Teichmann
WST-Parser: revert the assumption of only complete columns.2013-10-31, by Tom Gottfried
Correct r7481: use ParseException instead of IllegalArgument that was catched at wrong place.2013-10-31, by Tom Gottfried
Removed charset encoding on outs. They are mainly binary data which simply should be proxied through.2013-10-31, by Sascha L. Teichmann
Merged2013-10-31, by Sascha L. Teichmann
WQDay is increasing(?) if it is empty of last is greater than first.2013-10-31, by Sascha L. Teichmann
Dont assume that wqdays are always of none zero length.2013-10-31, by Sascha L. Teichmann
Datacage recommendations: Sort outs to to generate consistent cache keys.2013-10-31, by Sascha L. Teichmann
WST-Parser and doc: reject files with wrong number of columns.2013-10-31, by Tom Gottfried
WST-Parser: Improve handling of line-endings.2013-10-31, by Tom Gottfried
Log errors instead of starting WSPLGEN if required arguments are missing.2013-10-31, by Tom Gottfried
issue1657: Adjust DC conf to spawn sounding widths.2013-10-31, by Felix Wolfsteller
issue1657: Spawn BEDHEIGHT_SOUNDING_WIDTH facet if asked to. Twiggly.2013-10-31, by Felix Wolfsteller
i18n for sounding with axis and facet.2013-10-31, by Felix Wolfsteller
Datacage recommendations caching: Use LFU strategy to rotate parameter recommendations out earlier. This should be a better config in multiuser user setups because the more frequently used terminal state recs will survive longer.2013-10-30, by Sascha L. Teichmann
issue1345: Add flow_velocities folder.2013-10-30, by Felix Wolfsteller
issue1345: i18n for dc.2013-10-30, by Felix Wolfsteller
Dokumention zur Installation erweitert2013-10-30, by Andre Heinecke
Experimental caching of datacage recommendations. The respective hook is called a lot and running the datacage over and over again when loading data can be expensive. So the generated recommendations are cached for some time.2013-10-30, by Sascha L. Teichmann
issue1512: Fix loading of all former flow vel. calculation via folder.2013-10-30, by Felix Wolfsteller
issue1512: Show all flowvelocity facet in former calc. flow vel. part of dc.2013-10-30, by Felix Wolfsteller
issue1571: i18n.2013-10-30, by Felix Wolfsteller
issue1572: Call longitudinal-section-user-prototype for bedheight-diffs/year.2013-10-30, by Felix Wolfsteller
Merged2013-10-30, by Sascha L. Teichmann
Datacage: Remove tree branches vom datacage tree on client side which do not contain loadable data.2013-10-30, by Sascha L. Teichmann
Simplified recommendattion monitor code a bit.2013-10-30, by Sascha L. Teichmann
Code cleanup.2013-10-30, by Sascha L. Teichmann
Fix for flys/issue1654: Divide through denisity, do not multiply.2013-10-30, by Sascha L. Teichmann
Schema change: add lookup table for sediment yield kinds to have its values documented.2013-10-29, by Tom Gottfried
flys/issue1625: Changed default sediment density factor from 1.8 to 1.9 . The value can be changed by adusting conf.xml (/artifact-databae/options/sediment-density-factor/text()).2013-10-29, by Sascha L. Teichmann
Importer: document where annotations are searched for.2013-10-29, by Tom Gottfried
run_geo.sh: allow logging as documented.2013-10-29, by Tom Gottfried
issue1397: Fix reference_curve former calculations in dc.2013-10-29, by Felix Wolfsteller
dc i18n.2013-10-29, by Felix Wolfsteller
issue1512: Repair loading all of flowvelocitymeasurements by not equipping2013-10-29, by Felix Wolfsteller
inor Layout + Wiki2013-10-28, by Andre Heinecke
Rechtschreibkorrektur (durchgeführt von Bettina)2013-10-28, by Andre Heinecke
More installation documentation2013-10-28, by Andre Heinecke
issue1345: Sort sediment densities by year.2013-10-28, by Felix Wolfsteller
meta-data.xml: Simplify query for densities a bit, sort by depth.2013-10-28, by Felix Wolfsteller
Start installation documentation for specific client installation2013-10-27, by Andre Heinecke
Importer doc: fix some outdated or wrong infos.2013-10-25, by Tom Gottfried
Importer and doc: Warn instead of die if AT- or STA-file is missing for a gauge.2013-10-25, by Tom Gottfried
FacetTypes: Cosmetics.2013-10-25, by Felix Wolfsteller
Declare certain bedheight-diagrams as charttypes, for manual points.2013-10-25, by Felix Wolfsteller
meta-data.xml: Include bedheight-diffs per year in minfo-user-dc.2013-10-25, by Felix Wolfsteller
meta-data.xml: Subsume the different bed-quality dc-nodes.2013-10-25, by Felix Wolfsteller
i18n for dc added.2013-10-25, by Felix Wolfsteller
meta-data.xml: Ease i18nability.2013-10-25, by Felix Wolfsteller
Geoimporter: be case-insensitive when looking for floodplains.2013-10-25, by Tom Gottfried
make-opt-package.sh: give path to internal 'repository'.2013-10-25, by Tom Gottfried
meta-data.xml: Remove duplicates and 'special' macros fro special outs from2013-10-25, by Felix Wolfsteller
meta-data.xml: Remove delta-wt from longitudinal-section-user-prototype .2013-10-25, by Felix Wolfsteller
Fix Typo in german i18n (e.g. issue1345) .2013-10-25, by Felix Wolfsteller
Partly revert rev 7419, conservative guess about which "outs" are handcrafted.2013-10-23, by Felix Wolfsteller
Experimental patch: Do not run datacage on artifacts that are loaded from datacage. His hopefully minimizes the datacage runs when a lot of data is loaded.2013-10-25, by Sascha L. Teichmann
Importer doc: fix some layout issues.2013-10-24, by Tom Gottfried
Made SedimentDensityValue Serializable.2013-10-23, by Felix Wolfsteller
issue1345: Re-enable sediment load total loads, now that factory is fixed.2013-10-23, by Felix Wolfsteller
Fix total sediment load fetching.2013-10-23, by Felix Wolfsteller
issue1345: Showing sediment densitie by depth, comment total load.2013-10-23, by Felix Wolfsteller
Fix typo.2013-10-23, by Tom Gottfried
(issue965) Handle the case that diffids are not available2013-10-23, by Andre Heinecke
meta-data.xml: Be less restrictive in showing facets from waterlevels-discharge.2013-10-23, by Felix Wolfsteller
meta-data.xml: Exclude empty.facet s.2013-10-23, by Felix Wolfsteller
meta-meta.xml: Also fetch extreme_base curves via dc.2013-10-23, by Felix Wolfsteller
meta-data.xml: cosmetics.2013-10-23, by Felix Wolfsteller
Add another axis (height) to longitudinal-diagram-defaults.2013-10-23, by Felix Wolfsteller
meta-data.xml: Cosmetics.2013-10-23, by Felix Wolfsteller
meta-data.xml: More usage of collection-group-macro.2013-10-23, by Felix Wolfsteller
Datacage: Consequently call macro 'longitudinal-section-user-prototype' in all longitudinal sections of old calculation. Moved asymmeterical stuff to prototype. This may crash!2013-10-23, by Sascha L. Teichmann
meta-data.xml: Create and use collection-group macro.2013-10-23, by Felix Wolfsteller
BedHeightSingleParser: fix no-data-line detection.2013-10-23, by Tom Gottfried
Datacage ref doc: More docs on functions.2013-10-23, by Sascha L. Teichmann
Datacage ref doc: More docs for functions.2013-10-22, by Sascha L. Teichmann
issue1205: made SedimentDensity serializable.2013-10-22, by Felix Wolfsteller
meta-data.xml: Switch more longitudinal-section like user-dc content to prototype macro.2013-10-22, by Felix Wolfsteller
Datacage: Fixed macro call.2013-10-22, by Sascha L. Teichmann
Fixed meta-data.xml2013-10-22, by Sascha L. Teichmann
Datacage ref doc: More doc for functions.2013-10-22, by Sascha L. Teichmann
issue1512: Sort flow-velocity-models by discharge_zone.value.2013-10-22, by Felix Wolfsteller
issue1473: Show differences project name in dc.2013-10-22, by Felix Wolfsteller
meta-data.xml: Fix referenced out for discharge_longitudinal_section.2013-10-22, by Felix Wolfsteller
(issue965) Add a comment to explain what we do here2013-10-21, by Andre Heinecke
(issue965) Use new datacage magic to have year filtering for bedheights2013-10-21, by Andre Heinecke
Importer doc: mention flow direction retrieval from WST.2013-10-21, by Tom Gottfried
Removed dc:to-date(). Added 'date' type for <dc:convert> instead.2013-10-21, by Sascha L. Teichmann
issue1521: Adhere more to dc 'spec', show discharges of flow velocity models.2013-10-21, by Felix Wolfsteller
Datacage reference doc: Explain dc:container-context and dc:properties.2013-10-21, by Sascha L. Teichmann
Datacage: Added TODOs for new functions in ref document.2013-10-21, by Sascha L. Teichmann
issue1512: Make double entry of Q facet for flowvelocities dissappear.2013-10-21, by Felix Wolfsteller
Fix typo in german i18n.2013-10-18, by Felix Wolfsteller
issue1512: improved i18n for flow velocity measurement facets.2013-10-18, by Felix Wolfsteller
BedHeightProcessor: Finally display heights, not widths.2013-10-17, by Felix Wolfsteller
BedHeightProcessor: Set axis label.2013-10-17, by Felix Wolfsteller
BedHeight(Sounding)Processor: Use FacetTypes.2013-10-17, by Felix Wolfsteller
Removed debris.2013-10-17, by Felix Wolfsteller
Moved BedHeightEpoch to BedHeightEpochData.2013-10-17, by Felix Wolfsteller
Renamed artifacts/**/BedHeight(Single) to BedHeight(Single)Data, to resolve2013-10-17, by Felix Wolfsteller
Stub for new BedHeightProcessor.2013-10-17, by Felix Wolfsteller
BedHeightSoundingProcessor: Log if data is now handled.2013-10-17, by Felix Wolfsteller
BedHeightSoundingProcessor: refactored to avoid drifting behavior when using2013-10-17, by Felix Wolfsteller
meta-data.xml: cleanup longitudinal-section-user-prototype, removing dupes.2013-10-17, by Felix Wolfsteller
Removed same package import.2013-10-21, by Sascha L. Teichmann
Removed obsolete import.2013-10-21, by Sascha L. Teichmann
Datacage: Add function dc:to-date(number) which converts a epoch base number to a date object.2013-10-18, by Sascha L. Teichmann
Datacage: Added dc:min-number(list) and dc:max-number(list) to extract the numerical2013-10-18, by Sascha L. Teichmann
Datacage: Add function dc:find-all(needle, haystack).2013-10-18, by Sascha L. Teichmann
(issue1474) Fix deepCopy signatures and actually copy the facet index now2013-10-18, by Andre Heinecke
(issue1071) Handle the case where no MeasurementStation exists2013-10-18, by Andre Heinecke
More datacage ref doc.2013-10-17, by Sascha L. Teichmann
(issue1474) Fix copying of SQ* Facets2013-10-17, by Andre Heinecke
Importer: Avoid 0-lenght Q-ranges in WST-CSV-parsers.2013-10-17, by Tom Gottfried
Replaced more tabs with spaces + minor cosmetics (removed out commented code from double precision branch).2013-10-17, by Sascha L. Teichmann
Replaced tabs with 4 spaces.2013-10-17, by Sascha L. Teichmann
WstParser: Do not add Q-range for trailing Q-line.2013-10-17, by Tom Gottfried
Removed obsolete imports.2013-10-17, by Sascha L. Teichmann
Removed obsolete import + whitespace cleanup.2013-10-17, by Sascha L. Teichmann
Add getModelDescription to FlowVelocityModel.2013-10-17, by Felix Wolfsteller
White space cosmetics, added debug output.2013-10-17, by Felix Wolfsteller
SedimentYieldArtifact: Accept 'total' load, genreate facet for it.2013-10-17, by Felix Wolfsteller
FlowVelocityModelArtifact: Slightly improve facet names.2013-10-17, by Felix Wolfsteller
Cosmetics.2013-10-17, by Felix Wolfsteller
Cosmetics.2013-10-17, by Felix Wolfsteller
issue1473: Let vollmer curves appear under 'former calc/waterlevels from fix.'.2013-10-17, by Felix Wolfsteller
cosmetics.2013-10-17, by Felix Wolfsteller
Adjusted i18n to match the one in client.2013-10-16, by Felix Wolfsteller
Use more failsave pattern for SQ-facets.2013-10-16, by Andre Heinecke
Configure correct name for SQ-relation C-chart.2013-10-16, by Andre Heinecke
i18n for total load dc.2013-10-16, by Felix Wolfsteller
Offer total loads in dc.2013-10-16, by Felix Wolfsteller
Added i18n for upcoming total load via dc.2013-10-16, by Felix Wolfsteller
Refactoring: Move functionality of BedHeightAccess into BedHeightFacet for now.2013-10-16, by Felix Wolfsteller
Minor BedHeightAccess refactoring.2013-10-16, by Felix Wolfsteller
Remove code that was previously commented out.2013-10-16, by Tom Gottfried
BedHeightSingleParser: do not omit lines if last column is empty.2013-10-16, by Tom Gottfried
Jim, he's dead.double-precision 2013-10-16, by Sascha L. Teichmann
Merged double-precision branch.2013-10-16, by Sascha L. Teichmann
Merge branch defaultdouble-precision 2013-10-16, by Sascha L. Teichmann
Reorder generation of static part of describe document for fast XML DOM handling.2013-10-16, by Sascha L. Teichmann
(issue1353) Document that there are more things to syncing then just the Number2013-10-16, by Andre Heinecke
(issue1474) Add sqrelation user data and disable filtering for it2013-10-16, by Andre Heinecke
Add debug output for variables in user context2013-10-16, by Andre Heinecke
Break sometimes when dumping variables. Still ugly but a bit nicer.2013-10-15, by Andre Heinecke
Importer doc: fix syntax error.double-precision 2013-10-16, by Tom Gottfried
BedHeightSingleParser: do not log every data line in file.double-precision 2013-10-16, by Tom Gottfried
Do not log trace of WST-Parser parse exception and document it.double-precision 2013-10-15, by Tom Gottfried
WST-Parser: check consistence of station ordering in file.double-precision 2013-10-15, by Tom Gottfried
Comments.double-precision 2013-10-15, by Tom Gottfried
Merged changes from default into double precision branch.double-precision 2013-10-15, by Tom Gottfried
WST Import: Added parse error exception to WST parser.2013-10-15, by Sascha L. Teichmann
typo fix in doc.2013-10-15, by Felix Wolfsteller
BedHeightsArtifact: Use FacetTypes, eliminate local facet type definition.2013-10-15, by Felix Wolfsteller
Prepare new facet types for bedheights.2013-10-15, by Felix Wolfsteller
i18n for old calculations dc.2013-10-15, by Felix Wolfsteller
Importer manual: use unique revision identifier.double-precision 2013-10-15, by Tom Gottfried
Add aforementioned user-prototype.2013-10-15, by Felix Wolfsteller
Prototypically add longitudinal-section-user-prototype, with issues.2013-10-15, by Felix Wolfsteller
Importer packaging: run pdflatex three times to get references and page numbering right.double-precision 2013-10-15, by Tom Gottfried
issue1345: Show bedheight_type in tooltip.2013-10-15, by Felix Wolfsteller
issue1345: Bring back waterlevel/diffs from fixation into minfo dc element.2013-10-15, by Felix Wolfsteller
Fix DC group-by statement, there is no 'oid' variable around.2013-10-15, by Felix Wolfsteller
issue1345: DC: group bed heights of single years by year.2013-10-15, by Felix Wolfsteller
Importer: skip historical discharge tables per default as they come via ETL.double-precision 2013-10-15, by Tom Gottfried
Add warning on errors when importing duplicates.double-precision 2013-10-15, by Tom Gottfried
issue1345: Fix sediment load facet type, adjust theme name.2013-10-14, by Felix Wolfsteller
have same translations for sediment loads fractions.2013-10-14, by Felix Wolfsteller
Datacage doc ref: Explain dc:group2013-10-14, by Sascha L. Teichmann
Datacage ref doc: Explain dc:filter.2013-10-14, by Sascha L. Teichmann
Datacage ref doc: Move dc:if & dc:choose up because they are more important than other elements.2013-10-14, by Sascha L. Teichmann
Datacage ref doc: Explain dc:for-each2013-10-14, by Sascha L. Teichmann
Datacage ref doc: Explain dc:virtual-column.2013-10-14, by Sascha L. Teichmann
Datacage ref doc: Explain dc:macro & Co.2013-10-14, by Sascha L. Teichmann
Datacage ref doc: Explain dc:variable and dc:convert.2013-10-14, by Sascha L. Teichmann
Dataage ref doc: Explain dc:context, dc:comment2013-10-14, by Sascha L. Teichmann
Datacage ref doc: More structure. Explain text interpolation.2013-10-14, by Sascha L. Teichmann
Added sedimentdensity i18n.2013-10-14, by Felix Wolfsteller
issue1345: Added getDepth() to SedimentDensityFactory.2013-10-14, by Felix Wolfsteller
issue1345: Change Sediment Density Facet label.2013-10-14, by Felix Wolfsteller
SedimentDensityProcessor: Fix, use getAllDensities instead of only dens. in year 2006.2013-10-14, by Felix Wolfsteller
SedimentDensity: Fix getAllDensities and made it public.2013-10-14, by Felix Wolfsteller
i18n for dc and facet name generation.2013-10-14, by Felix Wolfsteller
cosmetics.2013-10-14, by Felix Wolfsteller
issue1345: Adjust name of sediment yield/load facets to include fraction name and times.2013-10-14, by Felix Wolfsteller
issue1345: Prepare SedimentLoadFactory to deliver fraction name and time ranges.2013-10-14, by Felix Wolfsteller
cosmetics.2013-10-14, by Felix Wolfsteller
Comment in meta-data.xml.2013-10-14, by Felix Wolfsteller
cosmetical description fix.2013-10-14, by Felix Wolfsteller
Removed obsolete imports.2013-10-12, by Sascha L. Teichmann
(issue1529) Be more tolerant in the fitting.2013-10-11, by Andre Heinecke
(issue1529) Only interpolate within a step limit in WQ diagram2013-10-11, by Andre Heinecke
Polish SQ Datacage and Facets2013-10-11, by Andre Heinecke
doc fix <3 .2013-10-11, by Felix Wolfsteller
doc fix.2013-10-11, by Felix Wolfsteller
Doc typo fix.2013-10-11, by Felix Wolfsteller
issue1345: include fix for display of epochs stoptime.2013-10-11, by Felix Wolfsteller
issue1512: conf.xml: configure flowvelocitymodel artifact-factory.2013-10-11, by Felix Wolfsteller
issue1512: Adde flow-velocity-models dc conf.2013-10-11, by Felix Wolfsteller
issue1345: Added accidentally ommitted i18n for sedimentload dc.2013-10-11, by Felix Wolfsteller
issue1512: spawn more facets for FlowVelocityMeasurementArtifact .2013-10-11, by Felix Wolfsteller
issue1512: Adjusted Q and WOutProcessors to handle data2013-10-11, by Felix Wolfsteller
More doc fixes.2013-10-11, by Felix Wolfsteller
Processor: Doc.2013-10-11, by Felix Wolfsteller
issue1512: Added method to get FlowVelocityModel by id.2013-10-11, by Felix Wolfsteller
issue1512: Initial commit of FlowVelocityModelArtifact.2013-10-11, by Felix Wolfsteller
issue1512: FlowVelocityCalculation: Opened prepareData(), added doc.2013-10-11, by Felix Wolfsteller
issue1512: Added comment, opened constructor as we will reuse this class.2013-10-11, by Felix Wolfsteller
issue1512: Prepare new facet types for flow velocity model facet, add comment.2013-10-11, by Felix Wolfsteller
Fixings overview panel: Send valid encoded JSON filters to server part of the client.2013-10-10, by Sascha L. Teichmann
issue1345: Factored out description creation for loads. Make epochs show end time.2013-10-10, by Felix Wolfsteller
issue1345: Added macro for the differing epoch-description, extended query.2013-10-10, by Felix Wolfsteller
issue1345: Minor refactoring, made structure for epoch loads equal year loads.2013-10-10, by Felix Wolfsteller
issue1345: Show fraction and year for sediment load dc subtree.2013-10-10, by Felix Wolfsteller
Revert 7273, add undefined macro to meta-data.xml.2013-10-10, by Felix Wolfsteller
Remove annotations from reference curve recommendations. There is no km-axis.2013-10-09, by Tom Gottfried
DC: Remove accidentaly used user-macro from system-content part.2013-10-09, by Sascha L. Teichmann
Removed calls to undefined macro.2013-10-09, by Sascha L. Teichmann
Removed duplicate macro.2013-10-09, by Sascha L. Teichmann
Added check for duplicate macros.2013-10-09, by Sascha L. Teichmann
Little workaround not to crash uf there is no theme style. TODO: Figure out why the theme style is null at this point.2013-10-09, by Sascha L. Teichmann
fixed typo.2013-10-09, by Tom Gottfried
Vollmer curve: Added facet for generating error report.2013-10-09, by Sascha L. Teichmann
meta-data.xml: Add more entries to discharge datacage ('user-part').2013-10-09, by Felix Wolfsteller
meta-data.xml: Let DC show (yet all) computed discharge curves as former calculations.2013-10-09, by Felix Wolfsteller
meta-data.xml: Refactored discharge-curve-prototype.2013-10-09, by Felix Wolfsteller
meta-data.xml: Add a macro to load previous discharge calculations.2013-10-09, by Felix Wolfsteller
BedHeightsArtifact: Import 'river' data, for use in "New Chart"-settings.2013-10-08, by Felix Wolfsteller
RangeAccess: Use min/max as from/to in RangeAccess.2013-10-08, by Felix Wolfsteller
Refactoring: Let RiverAccess.getRiver return an River.2013-10-08, by Felix Wolfsteller
issue1490: Fix text annotations of latest points.2013-10-08, by Felix Wolfsteller
issue1490: Translate other points as well, when at gauge.2013-10-08, by Felix Wolfsteller
issue1490: Translate text annotations position when displaying w/q- curve at gauge.2013-10-08, by Felix Wolfsteller
Minor code simplification.2013-10-08, by Felix Wolfsteller
ETL: Added repair XSLT script to rename value of GEWAESSER attribute 'Untere Havel-Wasserstraße (UHW)' with 'Havel'.2013-10-07, by Sascha L. Teichmann
First draft of a german reference document for datacage elements and functions written in reStructuredText. Lots of TODOs.2013-10-06, by Sascha L. Teichmann
Reduce usage of careless 'for (int i = 0; i < x.size(); i++)' pattern.2013-10-05, by Sascha L. Teichmann
Repaced some tabs by spaces.2013-10-05, by Sascha L. Teichmann
Replaced some tabs by spaces. Guys, please configure your editors not to insert tabs!2013-10-05, by Sascha L. Teichmann
Removed trailing whitespace.2013-10-05, by Sascha L. Teichmann
Removed trailing whitespace.2013-10-05, by Sascha L. Teichmann
Remove obsolete same package import.2013-10-05, by Sascha L. Teichmann
Removed trailing whitespace.2013-10-05, by Sascha L. Teichmann
Remove obsolete import.2013-10-05, by Sascha L. Teichmann
Check for inverted setting later.2013-10-04, by Andre Heinecke
Code simplification + moved code out of inner loop.2013-10-04, by Sascha L. Teichmann
Remove boundToOut facet pass. This is now only done if we filtered before.2013-10-04, by Andre Heinecke
Fix SQOverview the new generators need the master artifact set.2013-10-04, by Andre Heinecke
Polish labels and remove unused classes. SQOverview is currently broken.2013-10-04, by Andre Heinecke
Add new option to diagram axes "logarithmic" that can be set to an evaluator2013-10-04, by Andre Heinecke
Add SQRelation Processor2013-10-04, by Andre Heinecke
Configure SQ Relations to use new diagram way2013-10-04, by Andre Heinecke
Remove SQ Generator Subclasses for A-F2013-10-02, by Andre Heinecke
Remove obsolete classes2013-10-02, by Andre Heinecke
(issue1474) Add datacage loading for SQ Relations2013-10-02, by Andre Heinecke
Silence overly spammy debug output2013-10-01, by Andre Heinecke
Removed TODO which was already done.2013-10-04, by Felix Wolfsteller
issue1345: call longitudinal-section-prototype macro for flow-veloc. DC. Added todo.2013-10-04, by Felix Wolfsteller
issue 1345: Let sediment-load dc-config call longitdunal-section-prototype macro.2013-10-04, by Felix Wolfsteller
issue1345: Also let bed-quality use longitudinal-section-prototype.2013-10-04, by Felix Wolfsteller
issue1345: adjust dc-conf for befheight-diffs: is now longitudinal-section-prototype.2013-10-04, by Felix Wolfsteller
issue1345: meta-data.xml: For bedheight_middle, use the longitudinal-section-prototype.2013-10-04, by Felix Wolfsteller
Global facet filtering with bound to out: The DiagramAttributes implements the FacetFilter and not the Generators.2013-10-02, by Sascha L. Teichmann
Use diagram configuration and there processors to define compatible facets in loaded data.2013-10-02, by Sascha L. Teichmann
Made lookup for generators a class of its own. First step to use it as a compat filter for facets, too.2013-10-02, by Sascha L. Teichmann
meta-meta.xml: remove debugging info content.2013-10-02, by Felix Wolfsteller
issue1345: add flowvelocity-macro to winfo longitudinal-section.2013-10-02, by Felix Wolfsteller
issue1435: DC layout for sediment-loads more the way its requested.2013-10-02, by Felix Wolfsteller
WST-parser: making ranges tightly fit was broken since a<b was enforced. Re-enabled.double-precision 2013-10-01, by Tom Gottfried
Range importer: Do not allow to set invalid a or b.double-precision 2013-10-01, by Tom Gottfried
issue1435: For Sediment Density Facets, use densities name/description.2013-10-01, by Felix Wolfsteller
issue1435: SedimentDensityFactory: Changed variable name of query to reflect2013-10-01, by Felix Wolfsteller
issue1435: Add bedheights and morph. width to LS DC conf.2013-10-01, by Felix Wolfsteller
(issue1353) Document station check and warn message2013-10-01, by Andre Heinecke
Bring themes back into sync.2013-10-01, by Sascha L. Teichmann
Doc.2013-09-30, by Felix Wolfsteller
Initial commit of sediment density processor.2013-09-30, by Felix Wolfsteller
FlowVelocityGenerator: Simplify code a bit, master and its river is2013-09-30, by Felix Wolfsteller
SedimentDensityFactory: query densities by id only (not year).2013-09-30, by Felix Wolfsteller
issue1435: Add sedimentyield and sedimentdensity artifact factories to conf.xml.2013-09-30, by Felix Wolfsteller
i18n for densities.2013-09-30, by Felix Wolfsteller
issue1435: Call densities-macro of meta-data.xml thus show densities in datacage.2013-09-30, by Felix Wolfsteller
issue1435: Add densities-macro to meta-data.xml .2013-09-30, by Felix Wolfsteller
issue1435: Add SedimentDensityProcessor to longitudinal-diagram-defaults.xml to2013-09-30, by Felix Wolfsteller
issue1435: SedimentDensityFacet: Access sediment density data.2013-09-30, by Felix Wolfsteller
Cleaned imports.2013-09-30, by Felix Wolfsteller
issue1435: Store id of sediment yield only.2013-09-30, by Felix Wolfsteller
Cleaned imports.2013-09-30, by Felix Wolfsteller
Cleaned imports, added todo about naming.2013-09-30, by Felix Wolfsteller
issue1435: Added new sediment.density facet type.2013-09-30, by Felix Wolfsteller
issue1435: Add methods to get data in StyledSeriesBuilder-friendly format, doc.2013-09-30, by Felix Wolfsteller
issue1435: Stubs for SedimentDensityFacet and -Artifact.2013-09-30, by Felix Wolfsteller
issue1435: Prepare SedimentDensityFactory to delive data by sedimentdesity.id and .year.2013-09-30, by Felix Wolfsteller
Doc fix.2013-09-30, by Felix Wolfsteller
SedimentYieldArtifact: Removed unneeded documentation, removed but added one TODO.2013-09-30, by Felix Wolfsteller
issue1435: Remove hardcoded river for dc sediment yield sql query.2013-09-27, by Felix Wolfsteller
Remove method which was accidentally merged back from default.double-precision 2013-09-27, by Tom Gottfried
Merged changes from default into double-precision branch.double-precision 2013-09-27, by Tom Gottfried
Added accidentally omitted i18n.2013-09-27, by Felix Wolfsteller
issue1435: In DC conf, show sedimentyields in yield/[year|epoch]- structure, i18n.2013-09-27, by Felix Wolfsteller
issue1435: meta-data.xml: Add sedimentload/yield- part to minfo part of dc.2013-09-27, by Felix Wolfsteller
SedimentLoadProcessor: Add debug output when handling an out.2013-09-27, by Felix Wolfsteller
Doc.2013-09-27, by Felix Wolfsteller
StaticState: doc.2013-09-27, by Felix Wolfsteller
issue1435: SedimentYieldArtifact: Add functionality.2013-09-27, by Felix Wolfsteller
SedimentLoadFactory: Added method to quickly get the description of a given load.2013-09-27, by Felix Wolfsteller
SedimentLoadFactory: Fix query, added comment about correctness of2013-09-27, by Felix Wolfsteller
flys/issue1500: The main wst file determines km_up now.2013-09-27, by Sascha L. Teichmann
Initial commit for untested standalone sediment yield artifact.2013-09-26, by Felix Wolfsteller
issue1435: Add method to SedimentLoadFactory to fetch a SedimentLoad by id.2013-09-26, by Felix Wolfsteller
issue1435: Minor refactoring that will come handy to load SedimentLoads2013-09-26, by Felix Wolfsteller
Added tag 3.0.16 for changeset 12248d9eb3262013-09-26, by Andre Heinecke
Only filter the facets for unbound outs3.0.16 2013-09-26, by Andre Heinecke
Fix wrong usage of a_id and add more datacage stuff to WSPL longitundinal2013-09-26, by Andre Heinecke
Fix Y-Axis order for default longituidnals2013-09-26, by Andre Heinecke
Save target_out in the recommendation to ensure it is sent to the server2013-09-26, by Andre Heinecke
Filter waterleveldifferences according to unit.2013-09-26, by Tom Gottfried
Filter prefix of descriptions of MINFO-WSTs.2013-09-26, by Tom Gottfried
Move MINFO-fixation-stuff to MINFO-datacage and give specified names.2013-09-26, by Tom Gottfried
issue1435: Group minfo-stuff in dc, include waterlevels from csv.2013-09-26, by Felix Wolfsteller
Removed obsolete imports.2013-09-26, by Sascha L. Teichmann
Factor out longitudinal section default config and put it in its own file2013-09-26, by Andre Heinecke
Saveguard range access in case an artifact has no range2013-09-26, by Andre Heinecke
Add debug output triggered by debugging the last commit2013-09-26, by Andre Heinecke
TRUE != FALSE ;)2013-09-26, by Andre Heinecke
Add ShearStress Processor2013-09-26, by Andre Heinecke
Cosmetics2013-09-26, by Andre Heinecke
Handle flow velocity discharge in the new part of the QOutProcessor2013-09-26, by Andre Heinecke
Handle flow velocity measurements in the FlowVelocity processor2013-09-26, by Andre Heinecke
Handle flow velocity annotation in annoation processor2013-09-26, by Andre Heinecke
Diagram attributes: Use evaluators for title arguments, too. This makes it more consistent, powerful and a little bit faster.2013-09-26, by Sascha L. Teichmann
Removed obsolete imports.2013-09-26, by Sascha L. Teichmann
Use LongitudinalSectionGenerator2 in the LS diagrams.2013-09-26, by Andre Heinecke
Add startkm and endkm setting to longitudinal section generator 22013-09-26, by Andre Heinecke
Add NPE guard to XYStyle.2013-09-25, by Andre Heinecke
Add FlowVelocity Processor2013-09-25, by Andre Heinecke
Configure SedimentLoad to use the new diagram Generator2013-09-25, by Andre Heinecke
Add SedimentLoadProcessor2013-09-25, by Andre Heinecke
Noted insights.2013-09-26, by Felix Wolfsteller
issue1493: Also transform NaN X values to empty string.2013-09-25, by Felix Wolfsteller
Configure BedQuality to use new DiagramGenerator2013-09-25, by Andre Heinecke
Remove obsolete classes2013-09-25, by Andre Heinecke
Add BedQuality Processors2013-09-25, by Andre Heinecke
Configure bed_difference_year in the new way2013-09-25, by Andre Heinecke
Add label for bed difference axis2013-09-25, by Andre Heinecke
Add BedWidthProcessor to handle width facets2013-09-25, by Andre Heinecke
Rename BedWidthProcessor to BedHeightSounding processor.2013-09-25, by Andre Heinecke
Diagrams: Determine if axis should be inverted dynamically.2013-09-25, by Sascha L. Teichmann
Configure BedDiffYear diagram and remove old generator2013-09-25, by Andre Heinecke
Doc.2013-09-25, by Felix Wolfsteller
issue971: Include encoding parameter hardwiredly in csv export panels2013-09-25, by Felix Wolfsteller
issue971: Let ExportServiceImpl handle encoding parameter,2013-09-25, by Felix Wolfsteller
issue971: For diagram csv export request windows-1252 encoded output.2013-09-25, by Felix Wolfsteller
issue971: Prepare client to include encoding in download url.2013-09-25, by Felix Wolfsteller
issue971: Let ChartOutputServiceImpl interprete an "encoding" parameter.2013-09-25, by Felix Wolfsteller
Doc.2013-09-25, by Felix Wolfsteller
Full stop at doc sentence end.2013-09-23, by Felix Wolfsteller
Fix diagram title2013-09-25, by Andre Heinecke
Remove obsolete MiddleBedHeightGenerator classes2013-09-25, by Andre Heinecke
Configure MiddleBedHeight diagram2013-09-25, by Andre Heinecke
Remove wrong docstring2013-09-25, by Andre Heinecke
Also handle bed height annotations2013-09-25, by Andre Heinecke
Rename BedheightProcessor to BedWidthProcessor2013-09-25, by Andre Heinecke
Add axis label to bedheight processor.2013-09-25, by Andre Heinecke
Add MiddleBedHeightProcessor2013-09-25, by Andre Heinecke
Add dW handling also to the other new longitudinal section diagrams2013-09-25, by Andre Heinecke
Configure Longitudinal section diagram to use the new way.2013-09-24, by Andre Heinecke
Add currentKM context / request mapping to RiverUtils and use it in DiagramGenerator2013-09-24, by Andre Heinecke
Handle multiple processors for axis labeling.2013-09-24, by Andre Heinecke
Cosmetics2013-09-24, by Andre Heinecke
Add DeltaWProcessor to process data for a delta W axis.2013-09-24, by Andre Heinecke
Fix area label rendering.2013-09-24, by Andre Heinecke
Removed obsolete imports. Minor code cosmetics.2013-09-24, by Sascha L. Teichmann
Close generator-refactoringgenerator-refactoring 2013-09-24, by Andre Heinecke
Merge branch generator-refectoring into default.2013-09-24, by Andre Heinecke
Migrate w_differences and remove unused classesgenerator-refactoring 2013-09-24, by Andre Heinecke
Actually commit the canHandle part of the last revision. (WQCKms in WOut proc.)generator-refactoring 2013-09-24, by Andre Heinecke
Process corrected WQkms (WQCKms) also in the WOutProcessorgenerator-refactoring 2013-09-24, by Andre Heinecke
Fix applying the inversion of diagrams.generator-refactoring 2013-09-24, by Andre Heinecke
Migrate discharge_longitudinal_section generator to the new architecture.generator-refactoring 2013-09-24, by Andre Heinecke
Reactivate CALCULATION_DISCHARGE_LONGITUDINAL_CURVEgenerator-refactoring 2013-09-24, by Andre Heinecke
Also handle subtypes of Discharge longitundial Q facets.generator-refactoring 2013-09-24, by Andre Heinecke
Default to the label of longitundial Q axis in the QProcessorgenerator-refactoring 2013-09-24, by Andre Heinecke
Handle axis include zero setting for the new processing architecturegenerator-refactoring 2013-09-24, by Andre Heinecke
Minor cleanup / docgenerator-refactoring 2013-09-24, by Andre Heinecke
Add refactored LongitudinalSectionGenerator2 that inherits DiagramGeneratorgenerator-refactoring 2013-09-23, by Andre Heinecke
Add more Inversion logic to the DiagramGeneratorgenerator-refactoring 2013-09-23, by Andre Heinecke
Add AxisLabel handling to WDiffProcessorgenerator-refactoring 2013-09-23, by Andre Heinecke
Add WDiffProcessorgenerator-refactoring 2013-09-23, by Andre Heinecke
Add AreaProcessorgenerator-refactoring 2013-09-23, by Andre Heinecke
Added diagram attributes as converter to longitudinal section diagrams.generator-refactoring 2013-09-23, by Sascha L. Teichmann
Use pre-converted diagram attributes now.generator-refactoring 2013-09-23, by Sascha L. Teichmann
Fix domain axis label and add manualpoints processor to configgenerator-refactoring 2013-09-23, by Andre Heinecke
Move manual point handling into a Processorgenerator-refactoring 2013-09-23, by Andre Heinecke
Add useful debug output for diagram generator debugginggenerator-refactoring 2013-09-23, by Andre Heinecke
issue1493: Don't let NaNs slip through csv export.2013-09-23, by Felix Wolfsteller
Minor refactoring for 1493.2013-09-23, by Felix Wolfsteller
Add DiagramGenerator doOut functiongenerator-refactoring 2013-09-23, by Andre Heinecke
Add DiagramGenerator doOut functiongenerator-refactoring 2013-09-23, by Andre Heinecke
Simplify code to prepare DiagramGenerator signaturegenerator-refactoring 2013-09-23, by Andre Heinecke
Add more proessors to longitudinal diagramgenerator-refactoring 2013-09-23, by Andre Heinecke
Remove accidental commited debug linegenerator-refactoring 2013-09-23, by Andre Heinecke
Removed obsolete imports.generator-refactoring 2013-09-22, by Sascha L. Teichmann
Use Object instead of DOM Element as argument for setup of out generators. First step to remove dependency to XML DOM when using configuration.generator-refactoring 2013-09-22, by Sascha L. Teichmann
Little workaround to make diagram attribute parsing more thread safe. This is not the right solution.generator-refactoring 2013-09-22, by Sascha L. Teichmann
Moved generators to separate xml file.generator-refactoring 2013-09-22, by Sascha L. Teichmann
Implement Label handlinggenerator-refactoring 2013-09-20, by Andre Heinecke
Add info generator for refactored generatorsgenerator-refactoring 2013-09-20, by Andre Heinecke
Remove generator2 hacksgenerator-refactoring 2013-09-20, by Andre Heinecke
Simplyfy / unify "invert axis" logicgenerator-refactoring 2013-09-20, by Andre Heinecke
Removed faked ChartInfoGenerator2 and LS Info generator.generator-refactoring 2013-09-20, by Sascha L. Teichmann
ChartGenerator2 can be used as ChartInfoGenerator, too.generator-refactoring 2013-09-20, by Sascha L. Teichmann
Mergedgenerator-refactoring 2013-09-20, by Sascha L. Teichmann
Extended init() of OutGenerator to take name of the out to serve.generator-refactoring 2013-09-20, by Sascha L. Teichmann
Add LTR inversion code to diagram generator.generator-refactoring 2013-09-20, by Andre Heinecke
More Processor refactoringgenerator-refactoring 2013-09-20, by Andre Heinecke
Trim "names" and "class" attribute of out generators before using.generator-refactoring 2013-09-20, by Sascha L. Teichmann
Allow comma separated names in "names" attribute in out generators to allow registering for more than one name. Old "name" attribute is removed.generator-refactoring 2013-09-20, by Sascha L. Teichmann
Read out generator class info from "class" attribute instead of tags text body.generator-refactoring 2013-09-20, by Sascha L. Teichmann
Use DiagramGenerator for longitudinal section.generator-refactoring 2013-09-20, by Andre Heinecke
Add NPE guardgenerator-refactoring 2013-09-20, by Andre Heinecke
Add InfoGenerator Hacks to be removed soon.generator-refactoring 2013-09-20, by Andre Heinecke
Remove Axis Walker, unabstract Diagram generatorgenerator-refactoring 2013-09-20, by Andre Heinecke
Add second doOut implementations to work with diagram generatorgenerator-refactoring 2013-09-20, by Andre Heinecke
issue1494: Spawn Q facet only if Q data is there.2013-09-20, by Felix Wolfsteller
Simplify code a bit.2013-09-19, by Felix Wolfsteller
Doc, comment.2013-09-19, by Felix Wolfsteller
Close branch longitudinal-symmetry. Diagram refactoring is now done in branch generator-refactoring.longitudinal-symmetry 2013-09-20, by Tom Gottfried
Added 'include-zero' attribute to <axis> tag in diagram configuration.generator-refactoring 2013-09-20, by Sascha L. Teichmann
Added domain axis title to diagram attributes.generator-refactoring 2013-09-20, by Sascha L. Teichmann
Some more accessors and typo fixgenerator-refactoring 2013-09-20, by Andre Heinecke
Remove AxisProcessor "glue" class and extend Processor interfacegenerator-refactoring 2013-09-20, by Andre Heinecke
Fix indention / line lengthgenerator-refactoring 2013-09-20, by Andre Heinecke
Add Default Processor implementation and make processors inherit it.generator-refactoring 2013-09-20, by Andre Heinecke
Remove obsolete configuration of DGM-SRID.2013-09-19, by Tom Gottfried
DGM SRIds are now fetched from database instead of configuration.2013-09-19, by Sascha L. Teichmann
issue1436: Repair sedimentload epoch calculation,2013-09-19, by Felix Wolfsteller
Corrected debug output.2013-09-19, by Felix Wolfsteller
Call processors from configuration.generator-refactoring 2013-09-19, by Sascha L. Teichmann
Parse config when setup a new diagram.generator-refactoring 2013-09-19, by Sascha L. Teichmann
Add annotationProcessorgenerator-refactoring 2013-09-19, by Andre Heinecke
Added alignment rules for diagrams.generator-refactoring 2013-09-19, by Sascha L. Teichmann
Simple interpolation logic for diagram titles and subtitles.generator-refactoring 2013-09-19, by Sascha L. Teichmann
issue1493: Use other numberformat for csv data from diagram.2013-09-19, by Felix Wolfsteller
issue971: Bring a formatter in (a bad) place.2013-09-18, by Felix Wolfsteller
issue971: Use ";" as CSV separator also in ChartExportHelper, with the2013-09-18, by Felix Wolfsteller
Add DiagramGenerator which should mainly replace xygeneratorgenerator-refactoring 2013-09-18, by Andre Heinecke
Factor out annotation handling codegenerator-refactoring 2013-09-18, by Andre Heinecke
Fixed typo.generator-refactoring 2013-09-18, by Sascha L. Teichmann
Correct group for jfreechartgenerator-refactoring 2013-09-18, by Andre Heinecke
Added first version of diagram attribute parser.generator-refactoring 2013-09-18, by Sascha L. Teichmann
Update jfreechart dependency to 1.0.15generator-refactoring 2013-09-18, by Andre Heinecke
Use combine instead of combineignoringNaN (for compatibility)generator-refactoring 2013-09-18, by Andre Heinecke
Add setup(Element config) method to Generator interface to be initialized from configuration.generator-refactoring 2013-09-18, by Sascha L. Teichmann
issue971: Change CSV column separator to ";".2013-09-18, by Felix Wolfsteller
issue971: Change CSV column separator to ";" for Exports, client-side change follows.2013-09-18, by Felix Wolfsteller
Combine AxisDataset implementations and remove / simplify handling code.generator-refactoring 2013-09-18, by Andre Heinecke
Add a copy of the ChartGenerator class.generator-refactoring 2013-09-17, by Andre Heinecke
(issue1023) We do not support html getfeatureinfo2013-09-17, by Andre Heinecke
Doc.2013-09-17, by Felix Wolfsteller
WDifferencesState: Remove empty constructor.2013-09-17, by Felix Wolfsteller
issue1470: Make validate of WDifferencesState return true if in "new chart".2013-09-17, by Felix Wolfsteller
Doc.2013-09-16, by Felix Wolfsteller
Doc.2013-09-16, by Felix Wolfsteller
Cosmetics, typo fix in comment.2013-09-16, by Felix Wolfsteller
Cosmetics.2013-09-16, by Felix Wolfsteller
Added tag 3.0.15 for changeset a18a437647932013-09-16, by Andre Heinecke
issue1235: Do not add 'other' values twice to suspended sed. values, fix range.3.0.15 2013-09-16, by Felix Wolfsteller
Doc.2013-09-16, by Felix Wolfsteller
Fix syntax error on oracle by removing unused paramater2013-09-16, by Andre Heinecke
(issue1071) Change format for paramter a again2013-09-16, by Andre Heinecke
(Issue 1353): Add warning when a gauge is skipped because of station2013-09-16, by Andre Heinecke
issue1465: Assume that a "0" measurement for total sediment load is2013-09-16, by Felix Wolfsteller
issue1157: Fix sorting by start time (descending) for cross-section selection.2013-09-16, by Felix Wolfsteller
Schema change: increase precision of gauges.station to be able to hold nearby gauges.double-precision 2013-09-13, by Tom Gottfried
Fixed misuse of x !=/== Double.NaN2013-09-13, by Sascha L. Teichmann
issue1465: Adjust to new use of NaN instead of 0.2013-09-13, by Felix Wolfsteller
issue1465: Do not allow null ranges for fraction values, logger.error instead.2013-09-13, by Felix Wolfsteller
issue1465: Initialize sediment load fraction values with NaN instead of 0,2013-09-13, by Felix Wolfsteller
issue1465: Show space instead of '-' in table results view.2013-09-13, by Felix Wolfsteller
Typo fix.2013-09-13, by Sascha L. Teichmann
Another tweak for flys/issue1353: Be more tolerant about river names.2013-09-13, by Sascha L. Teichmann
make_release.sh: default DGM_PATH to path on poland.2013-09-13, by Tom Gottfried
issue1465: Prepare SedimentLoadExporter to show "-" for NaN-values.2013-09-13, by Felix Wolfsteller
Fix for flys/issue1479: Really iterate over the FLYS river not over empty list.2013-09-13, by Sascha L. Teichmann
SCHEMA CHANGE: a < b now enforced on ranges.double-precision 2013-09-12, by Tom Gottfried
DGM-importer: enforce a < b for ranges.double-precision 2013-09-12, by Tom Gottfried
Range import: enforce a<b not only for WSTs and set only a for zero-length ranges.double-precision 2013-09-12, by Tom Gottfried
Issue1333: expand single-line i.e. 0-lenght Q-range to minimal length.double-precision 2013-09-12, by Tom Gottfried
Minor schema change: allow to delete ranges with associated DEMs.double-precision 2013-08-30, by Tom Gottfried
Fix for flys/issue1018: Sort the pairs of (q, w) in q before creating a spline also in case of non interpolation.2013-09-12, by Sascha L. Teichmann
Fix for flys/issue1479: The indices of the dates of the analysis periods where re-mapped wrong.2013-09-12, by Sascha L. Teichmann
issue1472: Remove commented code.2013-09-12, by Felix Wolfsteller
issue1472: Do not guess flow direction from differences.2013-09-12, by Felix Wolfsteller
LocationDistancePanel error messages: do not imply calculation in the direction of kilometrage.2013-09-12, by Tom Gottfried
merged accidental head (nothing changed)2013-09-12, by Tom Gottfried
issue1378: Adjust style for flood-protection annotation values at y axis.2013-09-12, by Felix Wolfsteller
Closing branch 'dc-km-filter', should already be integrated in default (but not tracked by hg).dc-km-filter 2013-09-11, by Bernhard Reiter
(issue1023) mapserver templates mapfile.vm, wsplgen_layer.vm explicitely adding the three projects, so that mapserver offers the in the capabilities.2013-09-11, by Bernhard Reiter
Closing inaktive branch "dc-km-filter-rr".dc-km-filter-rr 2013-09-11, by Bernhard Reiter
Closing inactive branch.facets-slt 2013-09-11, by Bernhard Reiter
Removed obsolete imports.2013-09-11, by Sascha L. Teichmann
flys/issue1485 Better titles for UESK layers.2013-09-11, by Sascha L. Teichmann
Closing branch 'interaktive-karte', the contents must have been merged (without hg tracking it) to default long ago because it is in there.interaktive-karte 2013-09-11, by Bernhard Reiter
GWT client: Do not assumed there is always a SAML ticket when generating Wiki links.2013-09-11, by Sascha L. Teichmann
issue1465: Removed fix for non-matching measurement station and stations range.2013-09-11, by Felix Wolfsteller
Backed out changeset 6b9402377d072013-09-11, by Felix Wolfsteller
flys/issue1417 Be more fault tolerant if a river has no flood plain.2013-09-10, by Sascha L. Teichmann
issue1378: For additionals and basedata via datacage for2013-09-10, by Felix Wolfsteller
issue1457: Handle symbolic discharge of -1 as 'no discharge'.2013-09-10, by Felix Wolfsteller
Doc.2013-09-09, by Felix Wolfsteller
mapserver templates for flys.map and rivers.map: correcting the wms_onlineresource URL to partly help (issue1023)2013-09-10, by Bernhard Reiter
Fix for Browser and server running both on localhost. Previously all requests from localhost where accepted w/o auth. Now they are only accepted when a HTTP header X_NO_GGINA_AUTH=TRUE is send, too. This is ddone when printing maps.2013-09-09, by Sascha L. Teichmann
Corrected doc.2013-09-06, by Felix Wolfsteller
D4EArtifactCollection: Do not push CallContext and reference to db around.2013-09-06, by Felix Wolfsteller
Doc.2013-09-06, by Felix Wolfsteller
Doc.2013-09-06, by Felix Wolfsteller
Doc.2013-09-06, by Felix Wolfsteller
Correct SedimentLoadExporters compilability-fix.2013-09-06, by Felix Wolfsteller
Make EpsilonComparator serializable.2013-09-05, by Tom Gottfried
flys/issue1235: Same kicks against a few inconsistencies and bugs in the calculation of sediment loads. I believe it _do_not_ delivers the right results.2013-09-05, by Sascha L. Teichmann
Doc.2013-09-05, by Felix Wolfsteller
issue1465: Fetch correct measurement station (also if the km does not2013-09-05, by Felix Wolfsteller
SedimentLoadFactory: Improved readability.2013-09-05, by Felix Wolfsteller
SedimentLoadFactory: Further code simplification.2013-09-05, by Felix Wolfsteller
SedimentLoadFactory: Minor simplification.2013-09-05, by Felix Wolfsteller
SedimentLoadFactory: Extracted method to find range of matching2013-09-05, by Felix Wolfsteller
SedimentLoadExporter: Minor refac. Determine a displayed string2013-09-05, by Felix Wolfsteller
Workaround for flys/issue14070. TODO: Find the reason why a null document is given to the ThemeDocument.2013-09-04, by Sascha L. Teichmann
issue1458: Avoid facet duplicates.2013-09-03, by Felix Wolfsteller
Implement ManagedFacet.isSame to determine whether two facets are the same.2013-09-03, by Felix Wolfsteller
Added new CompareUtil (singleton Helper class).2013-09-03, by Felix Wolfsteller
AttributeWriter: Even better variable name.2013-09-03, by Felix Wolfsteller
AttributeWriter: Slightly improved variable naming and comments.2013-09-03, by Felix Wolfsteller
Added loadTotalRange getter.2013-08-30, by Felix Wolfsteller
(issue1452) Coalesce to zero to avoid NaN arithmetic.2013-08-30, by Andre Heinecke
(issue1023) Start returning more useful information2013-08-30, by Andre Heinecke
issue1462/3: When changing units (t/a -> m^3/a), also change total load.2013-08-30, by Felix Wolfsteller
SedimentLoad: Allow to set range of total load.2013-08-30, by Felix Wolfsteller
Doc fix.2013-08-30, by Felix Wolfsteller
SedimentLoadCalculation: Log an error on unknown mode.2013-08-30, by Felix Wolfsteller
issue1462: 1) & 4) Fix wrong density interpolation code.2013-08-30, by Felix Wolfsteller
Cosmetics, docs.2013-08-30, by Felix Wolfsteller
Cosmetics.2013-08-30, by Felix Wolfsteller
Doc.2013-08-30, by Felix Wolfsteller
Let hibernate do the parsing/casting.2013-08-29, by Felix Wolfsteller
issue957: Better name for flowvelocity measured values facets.2013-08-29, by Felix Wolfsteller
Assign theme to flowvelocitymeasurementvaluefacets.2013-08-29, by Felix Wolfsteller
Slightly better name for flowvelocitymeasurementvaluefacets.2013-08-29, by Felix Wolfsteller
(issue1451) Round Q's in the way it is done for AT's and localize KM2013-08-29, by Andre Heinecke
issue1466: Fix, sort stations before gap detection.2013-08-29, by Felix Wolfsteller
DischargeCurveGenerator: Prevent NPE when no gauge can be found.2013-08-29, by Felix Wolfsteller
issue1436: Exploit validity-rule of sedimentdensities.2013-08-28, by Felix Wolfsteller
issue1436: Towards finding the best match in years for densities.2013-08-28, by Felix Wolfsteller
issue1460: prevent NPEs when backstepping and changing Q values for WINFO2013-08-28, by Felix Wolfsteller
Importer Doc: be clearer on DEM-metadata import.double-precision 2013-08-28, by Tom Gottfried
Importer doc: added remark considering re-import of modified datadouble-precision 2013-08-27, by Tom Gottfried
Datacage: Add dc:all-state-successors() to enable predicates like dc:contains(dc:all-state-successors($artifact-name, $current-state-id), 'state.winfo.calculation_mode') which recursively collects all successor state ids an check for containment.2013-08-27, by Sascha L. Teichmann
(issue1451) Use distinct values for single_wq mode filtering instead of ranges.2013-08-27, by Andre Heinecke
Fix NPE in case the artifact does not even have the master attribute2013-08-27, by Andre Heinecke
DischargeLongitudinalSectionGenerator: Use QOutProcessor, fix compilation.2013-08-27, by Felix Wolfsteller
Let QOutProcessor also handle Discharge/Q-data.2013-08-27, by Felix Wolfsteller
SedimentLoadCalculation: Refactoring, extracted method.2013-08-27, by Felix Wolfsteller
issue1455: Extract QOutProcessor, use it2013-08-27, by Felix Wolfsteller
issue1455: Prepare MiddleBedHeightDiagram to show Q values.2013-08-27, by Felix Wolfsteller
WQKmsInterpolArtifact: Add different facet if wst has only 'fake' Qs.2013-08-26, by Felix Wolfsteller
Doc, cosmetics.2013-08-26, by Felix Wolfsteller
WstValueTable: Add method to find out wether the Qs are 'fake'2013-08-26, by Felix Wolfsteller
DischargeProcessor: Handle interpolated w values2013-08-26, by Felix Wolfsteller
Cosmetics, added @Override annotation, vim line.2013-08-26, by Felix Wolfsteller
Doc.2013-08-26, by Felix Wolfsteller
Added new Theme.2013-08-26, by Felix Wolfsteller
Added new ThemeMappings.2013-08-26, by Felix Wolfsteller
Mapping new facet type to theme.2013-08-26, by Felix Wolfsteller
Added new facet type to gaugedischargecurve.xml compat matrix.2013-08-26, by Felix Wolfsteller
FacetTypes: Added new type other.w.interpol .2013-08-26, by Felix Wolfsteller
Minor refactoring, renamed variable, extracted method.2013-08-26, by Felix Wolfsteller
Typo fix in debug message.2013-08-22, by Felix Wolfsteller
Artifacts: ThemeDocument. More debug output. Make more getters private to only expose the parsed values.2013-08-23, by Sascha L. Teichmann
Artifacts: Make TextStyle Make more robust.2013-08-23, by Sascha L. Teichmann
a bit of debug output2013-08-23, by Tom Gottfried
Artifacts: ThemeDocument. Removed some zero length checks because we do not store zero length strings in the backing map.2013-08-23, by Sascha L. Teichmann
Artifacts: ThemeDocument. The bloody part: Removal of the XPaths. Now the theme XML document is scanned once(!) at construction time for field values and the resulting key/value pairs are store in a map.2013-08-23, by Sascha L. Teichmann
Artifacts: Removed ThemeUtil.2013-08-23, by Sascha L. Teichmann
Artifacts: Moved logic of ThemeUtils into ThemeDocument. TODO: Remove ThemeUtils2013-08-23, by Sascha L. Teichmann
Artifacts: Introduce ThemeDocument & make stuff compileable again. THIS BREAKS THE SYSTEM! TODO: Move ThemeUtils into ThemeDocument.2013-08-22, by Sascha L. Teichmann
Artifacts: Make it compilable again.2013-08-22, by Sascha L. Teichmann
ETL: Take care of the fact that one river in AFT/SGM may correspond to N rivers in FLYS.2013-08-22, by Sascha L. Teichmann
Added tag 3.0.14 for changeset 84b1e87e86692013-08-22, by Andre Heinecke
ComputedDischargeCurveGenerator: Use DischargeProcessor to add main values.2013-08-22, by Felix Wolfsteller
ChartGenerator: Changed visibility of doAnnotations,2013-08-22, by Felix Wolfsteller
DischargeCurveGenerator: Use DischargeProcessor.2013-08-22, by Felix Wolfsteller
DischargeProcessor: Handle main-values. Temporarily disable w/q data handling.2013-08-22, by Felix Wolfsteller
DischargeProcessor: Minor refactoring (use getter), warn when no Ẁ/Q data found.2013-08-22, by Felix Wolfsteller
Give correct name to outlier method3.0.14 2013-08-21, by Tom Gottfried
Potential fix for flys/1453.2013-08-21, by Sascha L. Teichmann
Backed out changeset 60f39ee194732013-08-21, by Sascha L. Teichmann
ETL: Potential fix for flys/1453.2013-08-21, by Sascha L. Teichmann
Removed obsolete imports.2013-08-21, by Sascha L. Teichmann
FixA: Remapped indices of analysis periods, too. Needs testing!2013-08-21, by Sascha L. Teichmann
BWASTR-Import: name of tributary contains name of river, not the other way round.double-precision 2013-08-21, by Tom Gottfried
issue1378: Add axis markers for additional long-sect. without Q (e.g. dike heights).2013-08-21, by Felix Wolfsteller
Cosmetics.2013-08-21, by Felix Wolfsteller
issue1378: Also add ability to add text-annotations.2013-08-21, by Felix Wolfsteller
Geo-Importer: import axes 2D to avoid problems with invalid z-coordinatesdouble-precision 2013-08-21, by Tom Gottfried
FixA: Fix logger class reference.2013-08-21, by Sascha L. Teichmann
issue1378 (part): Make DC config for discharge curve offer correct2013-08-21, by Felix Wolfsteller
issue1378: Prepare DischargeCurveGenerator to digest wq-interpolated data.2013-08-21, by Felix Wolfsteller
Cosmetics.2013-08-21, by Felix Wolfsteller
issue1378: Prepare StyledSeriesBuilder to get double[][] values to translate.2013-08-21, by Felix Wolfsteller
issue1378: Preparing DischargeProcessor to be able to draw W/Q points,2013-08-20, by Felix Wolfsteller
Cosmetics.2013-08-20, by Felix Wolfsteller
Initial DischargeProcessor-commit (skeleton).2013-08-20, by Felix Wolfsteller
FixA: Make dates of analysis periods unique, too. TODO: Remap the indices like the reference interval.2013-08-21, by Sascha L. Teichmann
FixA W/Q Diagram: Allow duplicate points. It should work but it doesn't. :-/2013-08-20, by Sascha L. Teichmann
FixA: Fixed reference events mapping. TODO: Same for analysis periods.2013-08-20, by Sascha L. Teichmann
FixA Delta W(t): Add 30 seconds to colliding dates to avoid them vanishing from the diagrams.2013-08-20, by Sascha L. Teichmann
FixA: Reference points facets: the index of the point is stored in the lower 8 bits of the facect index. Why was it search via getIndex()?2013-08-19, by Sascha L. Teichmann
FixA overview: Fetch dates in higher resolution from database.2013-08-19, by Sascha L. Teichmann
Undo misguided schema change from r5207double-precision 2013-08-19, by Tom Gottfried
(issue1071) Increase river km column width2013-08-19, by Andre Heinecke
issue738: Adjust S/Q-Relation Diagram subtitles.2013-08-19, by Felix Wolfsteller
Fix Analysis: Code simplification in facets.2013-08-19, by Sascha L. Teichmann
Client: Removed an XPath eval and simplified a loop.2013-08-19, by Sascha L. Teichmann
Add small script to generate an issue overview from a roundup querry.2013-08-19, by Andre Heinecke
Factored our date formatter.2013-08-19, by Sascha L. Teichmann
Break long lines.2013-08-19, by Sascha L. Teichmann
issue1225: Add bedheight/year-difference points with a scale factor,2013-08-19, by Felix Wolfsteller
StyledSeriesBuilder: Added new method to add points with a scane factor.2013-08-19, by Felix Wolfsteller
Minor refactoring.2013-08-19, by Felix Wolfsteller
issue1395: Add missing w_differences compat to new chart ls.2013-08-19, by Felix Wolfsteller
(issue1347) Add SQ Relation fields for measurement station information2013-08-19, by Andre Heinecke
(issue1347) Update jasper templates with new fields2013-08-19, by Andre Heinecke
(issue1347) Add measurement station getter for location2013-08-19, by Andre Heinecke
Make debug functions of D4EArtifact public2013-08-19, by Andre Heinecke
Merged backout of changes for 1440 (gap-detection in bedquality).2013-08-19, by Felix Wolfsteller
Backed out changeset 10646f31efec2013-08-19, by Felix Wolfsteller
Merged.2013-08-19, by Felix Wolfsteller
issue1157: Only look at the best match for CrossSections to activate.2013-08-19, by Felix Wolfsteller
(issue1391): Build the current discarge curve name as requested2013-08-16, by Andre Heinecke
(issue1391)Add compatibility for hist.discharge in Hist discharge output2013-08-16, by Andre Heinecke
(issue1391) Filter by reference_gauge or by KM2013-08-16, by Andre Heinecke
Minor layout change2013-08-16, by Andre Heinecke
Fixing Analysis: Significantly (8-10x) improved the performance of the generation of the overview data. The data is now prefetched in batches.2013-08-17, by Sascha L. Teichmann
Removed _stupid_ TODO question. WE WANT PULL OUT LOGIC OUT OF ARTIFACTS!2013-08-17, by Sascha L. Teichmann
Add FixingCalculatedPoint to second theme, too2013-08-16, by Andre Heinecke
Part of flys/issue1168: Make facet names unique. It should help but there must be bug before the facet generation.2013-08-15, by Sascha L. Teichmann
(issue1444) Add theme for fixing calculated point2013-08-15, by Andre Heinecke
Readd accidentally removed line2013-08-15, by Andre Heinecke
(Issue1357) Pull river name into getReferenceGauge2013-08-15, by Andre Heinecke
Improve debug output in timerangestate2013-08-15, by Andre Heinecke
(issue1353) Add river name handling2013-08-15, by Andre Heinecke
(issue1353) Add method to model to gauge by number and river name2013-08-15, by Andre Heinecke
(issue1353) Add river name to query for discharge Info2013-08-15, by Andre Heinecke
Part of flys/issue1168: Fix themes of fixings delta w averages. Bring default and second theme back in snyc.2013-08-15, by Sascha L. Teichmann
Part of flys/issue1168: Show discharge sector averages as lines again.2013-08-15, by Sascha L. Teichmann
Add missing import in ArtifactMapfileGenerator2013-08-15, by Christian Lins
(issue657) Prevent errornous recreation of usershape mapfile fragment.2013-08-15, by Christian Lins
(issue657) Use regular expressions in Mapfile templates to catch various spellings of feature class types.2013-08-15, by Christian Lins
Backed out changeset 74a437805e2a2013-08-14, by Sascha L. Teichmann
(issue1347) Localize outliers and pdf Header2013-08-14, by Andre Heinecke
(Issue1347) Update jasper files for pdf export of new data2013-08-14, by Andre Heinecke
(issue1347) Add new variables to SQ Relation output.2013-08-14, by Andre Heinecke
Fix typo in SQRelation calculation2013-08-14, by Andre Heinecke
Mapfile templates contain regex expressions to catch features more robust (#657).2013-08-14, by Christian Lins
import_rivers.sh: skip cross sections instead of WST-file in first run.double-precision 2013-08-14, by Tom Gottfried
Importer Doc: force import of waterlevel WST-file in first run.double-precision 2013-08-14, by Tom Gottfried
Importer: force import of waterlevel WST-file in first run.double-precision 2013-08-14, by Tom Gottfried
S/Q relation: Fixed broken parameter creator constructor.2013-08-14, by Sascha L. Teichmann
S/Q relation: Added forgotten class.2013-08-14, by Sascha L. Teichmann
issue1328: improved i18n message2013-08-13, by Tom Gottfried
WstParser: warn only once if no unit comment is founddouble-precision 2013-08-13, by Tom Gottfried
Make postgresql-setup helper script work on different platforms.double-precision 2013-08-12, by Tom Gottfried
fixed syntax errors in Postgres-schema.double-precision 2013-08-12, by Tom Gottfried
Importer: set memory size according to docdouble-precision 2013-08-12, by Tom Gottfried
Geo-importer: remove leftovers of catchment and gauge location importersdouble-precision 2013-08-12, by Tom Gottfried
Importer Doc: Update title page automatically.double-precision 2013-08-10, by Tom Gottfried
Importer Doc: remove obsolete README. It is all in the tex-files now.double-precision 2013-08-09, by Tom Gottfried
Importer doc: correctly document use of gew-file for geo-importer.double-precision 2013-08-09, by Tom Gottfried
Geo-importer and doc: use commandline-argument instead of configuration for river selection.double-precision 2013-08-09, by Tom Gottfried
Importer Doc: complete master data of gauges and waterlevel model and move to top.double-precision 2013-08-09, by Tom Gottfried
WstParser and Importer doc: More sensible default unit and warn if it is used.double-precision 2013-08-09, by Tom Gottfried
Importer Doc: move general information on geo-importer to overview.double-precision 2013-08-09, by Tom Gottfried
Importer Doc: corrections to starting of geo-importer.double-precision 2013-08-09, by Tom Gottfried
Importer Doc: corrections of geo-importer configuration.double-precision 2013-08-09, by Tom Gottfried
Geo-importer: use commandline-argument instead of configuration for river selection.double-precision 2013-08-09, by Tom Gottfried
Importer Doc: document DEM-Metadata import.double-precision 2013-08-09, by Tom Gottfried
Importer Doc: reworked sectioning of geo-importer overview.double-precision 2013-08-09, by Tom Gottfried
Importer Doc: completed description of shapefile-parsers.double-precision 2013-08-09, by Tom Gottfried
Importer Doc: add description of alternativ attribut-names.double-precision 2013-08-09, by Tom Gottfried
Importer Doc: reformat tables in parser descriptions of geo-importer.double-precision 2013-08-09, by Tom Gottfried
Removed obsolete imports.longitudinal-symmetry 2013-08-09, by Tom Gottfried
Move Funcionality related to bed quality from FlowVelocityGenerator to LongitudinalSectionGenerator (previously left over).longitudinal-symmetry 2013-08-09, by Tom Gottfried
S/Q relation: Spell Ferguson with F.2013-08-09, by Sascha L. Teichmann
flys/issue1347: Added missing calcutions. TODO: Bring them into the generated outs.2013-08-09, by Sascha L. Teichmann
Cosmetics.2013-08-09, by Felix Wolfsteller
Moved most of the functionality of FlowVelocityGenerator to LongitudinalSectionGenerator on the way to longitudinal-section symmetry. ToDos left.longitudinal-symmetry 2013-08-09, by Tom Gottfried
merged changes from default into longitudinal-symmetry branchlongitudinal-symmetry 2013-08-08, by Tom Gottfried
merged changes from default into longitudinal-symmetrie branchlongitudinal-symmetry 2013-08-07, by Tom Gottfried
merge changes from default into longitudinal-symmetrie branch and make it buildlongitudinal-symmetry 2013-08-07, by Tom Gottfried
issue1378: Handle static_wqkms.w as annotations.2013-08-09, by Felix Wolfsteller
Cosmetics.2013-08-09, by Felix Wolfsteller
issue1378: Add wqkms.w|q to discharge curve facet compat list.2013-08-09, by Felix Wolfsteller
S/Q: Excel compat completed: Now the data is linearized before fitting. This can be prevented by setting the system property S/Q: Excel compat completed: Now the data is linearized before fitting. This can be prevented by setting the system property "minfo.sq.calcution.non.linear.fitting" to true.2013-08-08, by Sascha L. Teichmann
Removed debug output.2013-08-08, by Felix Wolfsteller
SedimentLoadFactory: Survive not completely defined sediment loads.2013-08-08, by Felix Wolfsteller
issue1060: i18n.2013-08-08, by Felix Wolfsteller
Added @Override-Annotation.2013-08-08, by Felix Wolfsteller
added vimline2013-08-08, by Felix Wolfsteller
Doc.2013-08-08, by Felix Wolfsteller
S/Q relation: Part I of 'faking' fitting linear data. S/Qs can now be subclassed and processed through views. TODO: Add knob to setup a linear data path.2013-08-08, by Sascha L. Teichmann
offer differences for bedheight-diffs in dc, and bedheight diffs in ls.2013-08-08, by Felix Wolfsteller
issue1439: Show line segments for points that have gaps on both sides. Small refac.2013-08-08, by Felix Wolfsteller
S/Q relation: More Excel compat.2013-08-07, by Sascha L. Teichmann
Remove accidentally commited debug output2013-08-07, by Andre Heinecke
issue1415: Corrected update query and parameter setting.2013-08-07, by Felix Wolfsteller
Geo-importer: removed unused variable.double-precision 2013-08-07, by Tom Gottfried
Geo-importer: removed obsolete run-script.double-precision 2013-08-07, by Tom Gottfried
issue1440: Add gap detection at >101m for BedQuality LS diagrams.2013-08-07, by Felix Wolfsteller
issue1439: reduce gap-tolerance to 101m.2013-08-07, by Felix Wolfsteller
issue1439: Use auto-gap detect when adding points to series for bed diff data.2013-08-07, by Felix Wolfsteller
StyledSeriesBuilder: Minor doc improvement.2013-08-07, by Felix Wolfsteller
Cosmetics.2013-08-07, by Felix Wolfsteller
QualityMeasurementFactory: Doc about singleton usage.2013-08-07, by Felix Wolfsteller
Made trivial QualityMeasurement-constructor private, as it shouldnt be used.2013-08-07, by Felix Wolfsteller
Doc.2013-08-07, by Felix Wolfsteller
Cosmetics.2013-08-07, by Felix Wolfsteller
cosmetics.2013-08-07, by Felix Wolfsteller
Importer Doc: error in W80CSV-Parser.double-precision 2013-08-06, by Tom Gottfried
flys/issue748: Force linear curve fitting. This is a real hack! Set the system property "minfo.sq.fitting.nonlinear" to re-enable the old behavior.2013-08-06, by Sascha L. Teichmann
issue1416: missing english i18n.2013-08-06, by Felix Wolfsteller
issue1416: exporter for sedimentload and i18n.2013-08-06, by Felix Wolfsteller
issue1436: Remove wrong condition where previous value does not exist but is2013-08-06, by Felix Wolfsteller
issue1435: Tolerate missing measurement values in QualityMeasurements.2013-08-06, by Felix Wolfsteller
issue1433: Update caller for last commit.2013-08-06, by Felix Wolfsteller
issue1433: Filter loaded unknown sediment yields by kind.2013-08-06, by Felix Wolfsteller
merged changes from default into double-precision branchdouble-precision 2013-08-06, by Tom Gottfried
issue1433: Include trailing empty strings in stringsplit, this prevents emission2013-08-06, by Felix Wolfsteller
issue1433: Do not emit warning when tolerated empty string as value.2013-08-06, by Felix Wolfsteller
Importer Doc: partly completed geo-importer parsers (with layout issues)double-precision 2013-08-05, by Tom Gottfried
Importer Doc: completion and corrections to overview of geo-importer.double-precision 2013-08-05, by Tom Gottfried
Importer Doc: Document reprojection of geo-data.double-precision 2013-08-05, by Tom Gottfried
Removed obsolete imports.2013-08-05, by Sascha L. Teichmann
Importer Dok: added missing warnings to hydr-morph sectiondouble-precision 2013-08-03, by Tom Gottfried
Sediment Density parser: avoid NPE when no year is givendouble-precision 2013-08-02, by Tom Gottfried
Sediment density parser: fetch year from metaline and parsedouble-precision 2013-08-02, by Tom Gottfried
issue1337: fix. Let theme not inherit from longitudinal_section, as this2013-08-01, by Felix Wolfsteller
meta-data.xml/DC: Automatically add annotations to middle bed height diagrams.2013-08-01, by Felix Wolfsteller
Importer Doc: fix syntax error.double-precision 2013-08-01, by Tom Gottfried
issue1393: Survive when off-epochs no total data, but other.2013-08-01, by Felix Wolfsteller
Cosmetics, docs, in range of issue1393.2013-08-01, by Felix Wolfsteller
issue1418: Fetch correct (not necessarily first) gauge2013-08-01, by Felix Wolfsteller
Geo-Importer: Don not import misc. floodplains as hydraulic boundary.double-precision 2013-08-01, by Tom Gottfried
issue1393: Avoid NPE for off-epoch when actually no off-epoch data available.2013-07-31, by Felix Wolfsteller
issue1393: Fix theme association for sedimentload.total_load .2013-07-31, by Felix Wolfsteller
Schema change: Store station of cross section lines with higher precision to avoid duplicates due to rounding.double-precision 2013-07-31, by Tom Gottfried
Doc.2013-07-31, by Felix Wolfsteller
merged changes from default into double-precision branchdouble-precision 2013-07-31, by Tom Gottfried
Remove cryptic warning messages.2013-07-31, by Felix Wolfsteller
issue1393: Fix display, no description, just years needed to select official epochs.2013-07-31, by Felix Wolfsteller
merged changes from default into double-precision branchdouble-precision 2013-07-31, by Tom Gottfried
Cosmetics.2013-07-31, by Felix Wolfsteller
issue1393/SedLoadOffEpochPanel: Request the correct (off-epoch) data2013-07-31, by Felix Wolfsteller
Doc.2013-07-31, by Felix Wolfsteller
Cosmetics, docs.2013-07-31, by Felix Wolfsteller
issu1393/SedimentLoadFactory: Handle off_epoch type queries.2013-07-31, by Felix Wolfsteller
issue1393/ImportRiver: Import official epochs from directory, minor refac.2013-07-31, by Felix Wolfsteller
issue1393/SedimentYieldParser: set kind of SedimentYields2013-07-31, by Felix Wolfsteller
issue1393/backend: Add kind property to ImportSedimentYield and SedimentYield.2013-07-31, by Felix Wolfsteller
minfo-schema-change/issue1393: add kind column to sediment_yield table.2013-07-31, by Felix Wolfsteller
Doc.2013-07-31, by Felix Wolfsteller
Cosmetics.2013-07-30, by Felix Wolfsteller
Added tag 3.0.13 for changeset 71da3d4ffb4a2013-07-30, by Andre Heinecke
issue1391: Some more unification fix km filtering for calculated discharges3.0.13 2013-07-30, by Andre Heinecke
Add compatibility with more facet names for mainvalues.2013-07-30, by Andre Heinecke
Importer Doc: completed and corrected section with warnings.double-precision 2013-07-30, by Tom Gottfried
issue748: Change StandardDeviation implmentation to what BFG calls Standard Deviation2013-07-30, by Andre Heinecke
Doc2013-07-30, by Felix Wolfsteller
Cosmetics.2013-07-30, by Felix Wolfsteller
Doc.2013-07-30, by Felix Wolfsteller
Remove duplicate code for mapfile generation. ID problem still not fixed (#657).2013-07-30, by Christian Lins
issue767: Do not encode the complete legend url2013-07-30, by Andre Heinecke
Remove accidental commited debug output2013-07-30, by Andre Heinecke
issue1391: Unify theme styles and add facet compatibilities2013-07-30, by Andre Heinecke
Importer scripts: add skip flag for W80-CSV to import_river.shdouble-precision 2013-07-30, by Tom Gottfried
issue766: Minimal fix for doubled RiverAxis.2013-07-29, by Andre Heinecke
Fix syntax error2013-07-29, by Andre Heinecke
issue1391: Add forgotten i18n for historical discharges2013-07-29, by Andre Heinecke
Importer Doc: Errors not documented so fardouble-precision 2013-07-29, by Tom Gottfried
Importer doc: Document error when no measurement station fits station in SQ-filedouble-precision 2013-07-29, by Tom Gottfried
Importer Dok: removed redundant doc and syntax errordouble-precision 2013-07-29, by Tom Gottfried
Importer Doc: small corrections to configuration and typodouble-precision 2013-07-29, by Tom Gottfried
Importer Dok: document import_river.shdouble-precision 2013-07-29, by Tom Gottfried
Importer Doc: small corrections to morphological datadouble-precision 2013-07-29, by Tom Gottfried
Importer Dok: documented measurement stationsdouble-precision 2013-07-29, by Tom Gottfried
issue1418: skip MainValues with NaN values.2013-07-29, by Felix Wolfsteller
issue1391: Add new facets for gaugedischarge2013-07-29, by Andre Heinecke
issue1391: Enable GaugeDischarge artifact to directly load a table by its ID2013-07-29, by Andre Heinecke
issue1891: Add method to get a discharge table by it's id2013-07-29, by Andre Heinecke
issue1391: Unify datacage elements in discharge curve outs and add historical discharges2013-07-29, by Andre Heinecke
issue1391: Fix syntax in gauge macros and add km filtering2013-07-29, by Andre Heinecke
issue1393: Handle bedheightdiff-facets in LS Generator.2013-07-29, by Felix Wolfsteller
issue1393: Add bedheight-difference facets to chart.xml longitudinal-section2013-07-29, by Felix Wolfsteller
Do not translate river annotations twice. (issue1370)2013-07-29, by Andre Heinecke
Activate also in historical discharge2013-07-26, by Andre Heinecke
issue1416: SedimentLoadExporter: Implemented rough output.2013-07-29, by Felix Wolfsteller
Prepare i18n for issue1416.2013-07-29, by Felix Wolfsteller
Use full stop in doc. This fixes my syntax highlight :) .2013-07-29, by Felix Wolfsteller
Doc.2013-07-29, by Felix Wolfsteller
Use foreach instead of for-loop.2013-07-29, by Felix Wolfsteller
Doc, vimline.2013-07-29, by Felix Wolfsteller
Added @Override annotation.2013-07-29, by Felix Wolfsteller
Doc.2013-07-29, by Felix Wolfsteller
Doc.2013-07-29, by Felix Wolfsteller
Cosmetics, docs, imports.2013-07-26, by Felix Wolfsteller
Importer doc: fixed typos, language and formatting issues for hydrological datadouble-precision 2013-07-26, by Tom Gottfried
Importer doc: cross section import completed.double-precision 2013-07-26, by Tom Gottfried
Importer Doc: document that Amtl_Linien.config is needed.double-precision 2013-07-26, by Tom Gottfried
Importer doc: move paragraphs on main values and WST to correct sectiondouble-precision 2013-07-26, by Tom Gottfried
Importer doc: comment out obsolete paragraph on invalid gauge numbers.double-precision 2013-07-26, by Tom Gottfried
Importer doc: small formating corrections to overview.double-precision 2013-07-26, by Tom Gottfried
Importer doc: small language corrections to Overviewdouble-precision 2013-07-26, by Tom Gottfried
issue1416: Move a stub new SedimentLoadExporter in place.2013-07-26, by Felix Wolfsteller
BedDifferenceExporter: Added licence header.2013-07-26, by Felix Wolfsteller
issue1259: in WQAdaptedInputPanel (vollmer w/q-input) allow2013-07-26, by Felix Wolfsteller
issue1413: Only show unknown sediment loads of selected unit type.2013-07-25, by Felix Wolfsteller
SedimentLoadUnknownFacet: Removed another debugging obstacle (wrong class for logger).2013-07-25, by Felix Wolfsteller
Fix, missed to commit a typo correction.2013-07-25, by Felix Wolfsteller
Fixed typo that made me search longer than necessary.2013-07-25, by Felix Wolfsteller
fix issue1415: Update state of artifact when storing artifact.2013-07-25, by Felix Wolfsteller
issue1415: Define update statement for artifacts state.2013-07-25, by Felix Wolfsteller
Make mainvalues active in discharge_curve and fix_wq_curve (issue1391)2013-07-25, by Andre Heinecke
Importer scripts: shpimporter needs backend name to play with Oracle.double-precision 2013-07-25, by Tom Gottfried
fix issue1412: make vollmer-curves functional in middle bedheight diagrams.2013-07-25, by Felix Wolfsteller
meta-data.xml: Partly fix a filter expression (unclodes literal).2013-07-25, by Felix Wolfsteller

less more | rev 8575: (0) -1920 tip

Mercurial > dive4elements > river

graph