graph
- Set the 'typ' attribute of new features (digitized) in the map.2011-09-01, by Ingo Weinzierl
- Added translation for "cross_section".2011-08-31, by Felix Wolfsteller
- Moved datacage into a separated widget.2011-08-25, by Sascha L. Teichmann
- Loading recommendations: If no reference artifact is given use current2011-08-25, by Sascha L. Teichmann
- Compile a list of recommendations out of2011-08-24, by Sascha L. Teichmann
- Added outs/facet filters when creation new artifacts.2011-08-24, by Sascha L. Teichmann
- Allow passing no master artifact to RPC service when creating new artifact.2011-08-24, by Sascha L. Teichmann
- Forward recommendations as a structure to RPC service.2011-08-24, by Sascha L. Teichmann
- Fix authorship in ChangeLog.2011-08-24, by Felix Wolfsteller
- Fix loading of recommendations when collection is not yet in place.2011-08-24, by Felix Wolfsteller
- Ensure list of recommendations is non-null after construction of DefaultCollection.2011-08-24, by Felix Wolfsteller
- Made Recommendation a class for direct use.2011-08-24, by Sascha L. Teichmann
- Minor cosmetics.2011-08-24, by Felix Wolfsteller
- Datacage: Use 'ids' instead of 'num' in user specific part, too.2011-08-24, by Sascha L. Teichmann
- Datacage: s/db-ids/ids/g to unify system and user specific loading.2011-08-24, by Sascha L. Teichmann
- Removed the digitize controls from map widget that is used in the floodmap state.2011-08-24, by Ingo Weinzierl
- Generate unique keys for anonymous artifacts (aka static data).2011-08-24, by Sascha L. Teichmann
- Added a UIProvider that displays a combobox on the left and a map widget in the helper container.2011-08-24, by Ingo Weinzierl
- Added a panel that wraps all the stuff to combine SmartGWT and GWT-OpenLayers.2011-08-24, by Ingo Weinzierl
- Datacage: Re-written ToLoad to feature the new filter models.2011-08-23, by Sascha L. Teichmann
- Datacage: Added models better suited for creating artifact facet filters.2011-08-23, by Sascha L. Teichmann
- Display the output modes of the master artifact only - all other artifact's output modes are NOT visible to the user.2011-08-23, by Ingo Weinzierl
- Added a service to get some basic spatial information used for map creation.2011-08-23, by Ingo Weinzierl
- Datacage: Re-added the outs parameter to the meta data service.2011-08-22, by Sascha L. Teichmann
- Datacage: Aggregate items to load for easier filtering facets2011-08-22, by Sascha L. Teichmann
- Save and reload user defined geometries (barriers) in the map.2011-08-22, by Ingo Weinzierl
- Added a NoInputPanel to suppress the creation of an input panel.2011-08-22, by Ingo Weinzierl
- Set the map projection and its max extent dynamically - information extracted from facets.2011-08-19, by Ingo Weinzierl
- Add code to extract data to load from datacage tree.2011-08-12, by Sascha L. Teichmann
- Datacage: Build UI tree in a more compatible style2011-08-09, by Sascha L. Teichmann
- UI: Set CollectionViews ("Window") title to include UUID of Collection.2011-08-09, by Felix Wolfsteller
- UI: Cosmetics in log messages of CollectionView.2011-08-09, by Felix Wolfsteller
- Adjusted German translation.2011-08-09, by Felix Wolfsteller
- Reverted accidental commit.2011-08-08, by Sascha L. Teichmann
- Removed superfluous imports.2011-08-08, by Sascha L. Teichmann
- Removed superfluous imports.2011-08-08, by Sascha L. Teichmann
- Datacage: Added a subclass of TreeNode to carry the informations needed by the loading listeners.2011-08-08, by Sascha L. Teichmann
- Meta data service converter: transfer attributes to client, too.2011-08-08, by Sascha L. Teichmann
- Meta data service: Create correct request document now.2011-08-08, by Sascha L. Teichmann
- Pass user id to the meta data service.2011-08-08, by Sascha L. Teichmann
- Minor cosmetic changes (javadoc comments).2011-08-02, by Felix Wolfsteller
- The Collection now knows its already loaded recommendations - the CollectionView will not load recommendations that have already been loaded before.2011-07-22, by Ingo Weinzierl
- Repaired broken XPath expression.2011-07-21, by Ingo Weinzierl
- Repaired broken recommendation parsing from Artifact's DESCRIBE document (which structure has changed).2011-07-21, by Ingo Weinzierl
- The layers created in the floodmap reflect to the facets this output mode has.2011-07-20, by Ingo Weinzierl
- Refactored code of theme panel and added a MapThemePanel.2011-07-20, by Ingo Weinzierl
- Facets read from Collection's DESCRIBE document keep all their attributes after the Collection's attribute has been modified.2011-07-19, by Ingo Weinzierl
- Read/create recommended Artifacts and add them to the current Collection.2011-07-18, by Ingo Weinzierl
- Added map tools to measure lines and polygons.2011-07-12, by Ingo Weinzierl
- Added missing ChangeLog entry for the last commit.2011-07-12, by Ingo Weinzierl
- Added map controls for digitizing and removing barriers.2011-07-12, by Ingo Weinzierl
- Added controls to navigate in the map.2011-07-11, by Ingo Weinzierl
- Finished layouting the map components.2011-07-11, by Ingo Weinzierl
- Introduced GwtOpenLayers to bring up maps.2011-07-08, by Ingo Weinzierl
- Improved the process of creating OutputTabs. Added support for map output.2011-07-08, by Ingo Weinzierl
- Added strings for the output mode 'floodmap'.2011-07-07, by Ingo Weinzierl
- Set default values in the BooleanPanel, TextProvider and AutoIntegerPanel.2011-07-07, by Ingo Weinzierl
- Finished the panel to enter waterlevel/ground information (from, to, diff).2011-07-07, by Ingo Weinzierl
- Finished the panel to activate/deactivate optional parameters.2011-07-07, by Ingo Weinzierl
- Finished the panel that allows integers and the string 'auto'.2011-07-07, by Ingo Weinzierl
- Made stepping forward/backword much smoother in the parameter list.2011-07-06, by Ingo Weinzierl
- Layout improvements related to the height of components in the current parameterlist.2011-07-06, by Ingo Weinzierl
- Integrated a stacked panel on the right side of the ParameterList that enables users to see calculation results and the helper panel at the same time.2011-07-06, by Ingo Weinzierl
- Added new UI providers.2011-07-05, by Ingo Weinzierl
- Commit forgotten ChangeLog.2011-07-05, by Ingo Weinzierl
- Added a panel that lets users step to a next state without feeding the current artifact with new data.2011-07-05, by Ingo Weinzierl
- Added the missing 'back'-button to the DistancePanel.2011-07-04, by Ingo Weinzierl
- #159 Added listeners to the locations and distances tables of the kilometer range panel to set the from/to fields.2011-07-01, by Ingo Weinzierl
- #159 The tables in the WQ panel for calculation 4 are now filled with data.2011-07-01, by Ingo Weinzierl
- The distance panel got two tables for locations and ranges. Both do not load any data until now.2011-06-30, by Ingo Weinzierl
- Implemented a new panel to enter kilometer ranges (with no option to insert locations).2011-06-30, by Ingo Weinzierl
- #185 Repaired zooming for IE8 and Chrome.2011-06-29, by Ingo Weinzierl
- Reordered delete and rename in project context menu, add separator.2011-06-29, by Sascha L. Teichmann
- #181 Repaired activate/deactivate function in theme list.2011-06-29, by Ingo Weinzierl
- GWT version upgrade from 2.1.1 to 2.3.02011-06-28, by Ingo Weinzierl
- Tagged RELEASE 2.4 of flys-client.2011-06-28, by Ingo Weinzierl
- merged flys-backend/2.42.4 2012-09-28, by Thomas Arendsen Hein
- Tagged RELEASE 2.4 of flys-backend.2011-06-28, by Ingo Weinzierl
- Prepared Changes for the upcoming release.2011-06-27, by Ingo Weinzierl
- Removed trailing whitespace.2011-06-26, by Sascha L. Teichmann
- Removed superfluous imports.2011-06-26, by Sascha L. Teichmann
- Added a method to river to find the gauge with the max overlap with a given interval.2011-06-26, by Sascha L. Teichmann
- When2011-06-26, by Sascha L. Teichmann
- River: Added method to find gauge by its name.2011-06-22, by Sascha L. Teichmann
- Importer: Fix import of annotation type classification.2011-06-19, by Sascha L. Teichmann
- Added classification of annotation types. Needs testing!2011-06-19, by Sascha L. Teichmann
- river model: Added method to find gauge by a position lying in its range.2011-06-18, by Sascha L. Teichmann
- First part of flys/issue182011-06-15, by Sascha L. Teichmann
- Fix for flys/issue110: Start index was shifted by one.2011-06-14, by Sascha L. Teichmann
- Forgot to store reference to edge.2011-06-14, by Sascha L. Teichmann
- Register the backend model.2011-06-14, by Sascha L. Teichmann
- Import edges to database.2011-06-14, by Sascha L. Teichmann
- Added 'Kanten' model2011-06-14, by Sascha L. Teichmann
- River: add method to find gauge by its station position.2011-06-08, by Sascha L. Teichmann
- River: Make search for gauges independent of from/to order.2011-05-26, by Sascha L. Teichmann
- Added a new view to select qs of a WST.2011-05-24, by Sascha L. Teichmann
- Added a new view to select ws of a WST.2011-05-24, by Sascha L. Teichmann
- flys/issue76: Close gaps between q ranges2011-05-23, by Sascha L. Teichmann
- Tagged release 2.3.1 of flys-backend.2011-05-20, by Ingo Weinzierl
- merged flys-artifacts/2.42012-09-28, by Thomas Arendsen Hein
- Tagged RELEASE 2.4 of flys-artifacts.2011-06-28, by Ingo Weinzierl
- The WST export contains the corrected W values now.2011-06-27, by Ingo Weinzierl
- WQ: Guessing increaing w is not based on direct neighbors any more.2011-06-27, by Sascha L. Teichmann
- ATWriter: Fixed array size to construct spline with stricly increasing values.2011-06-27, by Sascha L. Teichmann
- Prepared Changes for the upcoming release.2011-06-27, by Ingo Weinzierl
- Fix for flys/issue150: Invert the x axis if its guessed that water is increasing.2011-06-27, by Sascha L. Teichmann
- WQ: Added a method to guess is increasing.2011-06-27, by Sascha L. Teichmann
- #177 Commented out the code that generates the series names in discharge curves. This code currently generates memory problems and stops the server accepting new http requests.2011-06-27, by Ingo Weinzierl
- Removed trailing whitespace.2011-06-26, by Sascha L. Teichmann
- Removed dead code.2011-06-26, by Sascha L. Teichmann
- Forgot to check in last ChangeLog change.2011-06-26, by Sascha L. Teichmann
- Fix for flys/issue1732011-06-26, by Sascha L. Teichmann
- Fix for flys/issue1472011-06-26, by Sascha L. Teichmann
- Fix for flys/issue862011-06-26, by Sascha L. Teichmann
- Fix for flys/issue862011-06-26, by Sascha L. Teichmann
- Fixed "W am Pegel" calculations.2011-06-25, by Sascha L. Teichmann
- #174 Longitudinal section charts will now have an upper margin again.2011-06-24, by Ingo Weinzierl
- #172 Charts of type duration curve will now have a lower X set to '0'.2011-06-24, by Ingo Weinzierl
- ATWriter: Results are now in cm. Made it more robust against corner cases.2011-06-23, by Sascha L. Teichmann
- Added generation and configuration of AT facets.2011-06-23, by Sascha L. Teichmann
- Added exporter for AT facets.2011-06-23, by Sascha L. Teichmann
- New AT writer for results.2011-06-23, by Sascha L. Teichmann
- #157 Both types of discharge curves will now include the '0' value on the x-axis.2011-06-23, by Ingo Weinzierl
- WQDay is based on WQ now to make it exportable as AT.2011-06-23, by Sascha L. Teichmann
- Added base class WQ for WQKms.2011-06-23, by Sascha L. Teichmann
- Corrected configuration for error reports.2011-06-23, by Sascha L. Teichmann
- #164 Create the items for the adapted WQ state with range information for W and Q.2011-06-22, by Ingo Weinzierl
- "Abflusskurve am Pegel" looks correct again.2011-06-22, by Sascha L. Teichmann
- Improved situtation on rendering "Abflusskurve am Pegel". Not fully working, yet.2011-06-22, by Sascha L. Teichmann
- Generate facets for "Abflusskurven am Pegel". Not working by now. :-/2011-06-22, by Sascha L. Teichmann
- #161 Include the 0 on the second y axis (the Q axis) in longitudinal section charts intially.2011-06-22, by Ingo Weinzierl
- Draw correction curve again.2011-06-21, by Sascha L. Teichmann
- #157 Computed discharge curve charts always have a lower bound set to 0.2011-06-21, by Ingo Weinzierl
- #90 Added a margin between chart data and chart axes to avoid displaying curves on the chart border.2011-06-21, by Ingo Weinzierl
- Fix for flys/issue1582011-06-21, by Sascha L. Teichmann
- Fix for flys/issue1542011-06-21, by Sascha L. Teichmann
- Only generate 'outs' if they have facets.2011-06-21, by Sascha L. Teichmann
- Put the time-to-live of the collection into its DESCRIBE document.2011-06-21, by Ingo Weinzierl
- Configured states to generate report facets.2011-06-20, by Sascha L. Teichmann
- Generate report facets if there are problems with the calculations.2011-06-20, by Sascha L. Teichmann
- Added generator and facet for error reports.2011-06-20, by Sascha L. Teichmann
- New model to transport data and error reports of calculations.2011-06-20, by Sascha L. Teichmann
- Added calculation "am Pegel" version to the "Wasserspiegellage" calculation.2011-06-18, by Sascha L. Teichmann
- Removed more dead code.2011-06-18, by Sascha L. Teichmann
- Removed dead code.2011-06-18, by Sascha L. Teichmann
- Only generate facets when needed.2011-06-18, by Sascha L. Teichmann
- Merged revisions 2127-2133,2136-2137,2140,2143-2144,2146,2150-2151,2153-2154 via svnmerge from2011-06-17, by Sascha L. Teichmann
- Generate data facets for the computed states.facets-slt 2011-06-17, by Sascha L. Teichmann
- Add facet to access raw computed data.facets-slt 2011-06-17, by Sascha L. Teichmann
- Base WST/CSV exports on facets. TODO: generate the facets.facets-slt 2011-06-17, by Sascha L. Teichmann
- call computeAdvance() if we want to advance.facets-slt 2011-06-17, by Sascha L. Teichmann
- mico opt: inter cmps are faster than str cmps.facets-slt 2011-06-17, by Sascha L. Teichmann
- make getGauges() more robustfacets-slt 2011-06-17, by Sascha L. Teichmann
- Removed ComputeCallback because this was thought too complicated. Fixed issue with facets not be re-generated if same state is entered again.facets-slt 2011-06-17, by Sascha L. Teichmann
- OutGenerators use now facets to fetch necessary data.facets-slt 2011-06-17, by Ingo Weinzierl
- OutGenerators doOut() takes a facet object now instead of just its name.facets-slt 2011-06-16, by Ingo Weinzierl
- Add index and description of facets to collections describe document.facets-slt 2011-06-16, by Ingo Weinzierl
- Write computed facets into artifacts describe document.facets-slt 2011-06-16, by Ingo Weinzierl
- Generated facets for each output aspect.facets-slt 2011-06-16, by Ingo Weinzierl
- Store facets for each state.facets-slt 2011-06-16, by Ingo Weinzierl
- Use enums to dispatch computeFeed() and computeAdvance().facets-slt 2011-06-16, by Ingo Weinzierl
- Added two more compute() methods to ComputeCallback to distinguish between different phases of the artifact.facets-slt 2011-06-16, by Ingo Weinzierl
- Moved Waterlevel state into the correct package.facets-slt 2011-06-16, by Ingo Weinzierl
- Added a compute() method to WINFOArtifact which acts as a dispatcher for different computations. It triggers a calculation based on ComputeCallbacks that are generated by the current states.facets-slt 2011-06-16, by Ingo Weinzierl
- Merged with trunk and introduced hashing of computed values.facets-slt 2011-06-15, by Ingo Weinzierl
- Added a parameter 'wq_free' that determines that mode of calculation 1 (specifies if the calculation is bound to a gauge or not).2011-06-17, by Ingo Weinzierl
- DischargeLongitudinalSectionCurve will have corrected W facets now.2011-06-17, by Ingo Weinzierl
- DistanceInfoService: Got rid of namespace in result document.2011-06-14, by Sascha L. Teichmann
- #77 The curves in a duration chart will have names now.2011-06-14, by Ingo Weinzierl
- The min/max W/Q ranges in the panel for calculation4 are written into the DESCRIBE.2011-06-14, by Ingo Weinzierl
- Write top 'Oberkante' and bottom 'Unterkante' to out going XML if they exist.2011-06-14, by Sascha L. Teichmann
- The state that is used to enter locations writes the river's range into the DESCRIBE now.2011-06-14, by Ingo Weinzierl
- Added error reporting to 'Wasserspiegellage' calculation.2011-06-10, by Sascha L. Teichmann
- Added error reporting to 'Abflusskurve' calculation.2011-06-10, by Sascha L. Teichmann
- Added error reporting to 'Dauerzahlen' calculation.2011-06-10, by Sascha L. Teichmann
- Added methods to remove NaN values.2011-06-10, by Sascha L. Teichmann
- Added calculation base class to collect the problems during the calculations. Adjusted calculation 4 to use the mechanism.2011-06-10, by Sascha L. Teichmann
- Changed the zoom process - the values in the chart request document are percentual values that apply to every axis.2011-06-09, by Ingo Weinzierl
- Corrected axes/datasets mappings.2011-06-09, by Ingo Weinzierl
- Berechnung 4: Determine the gauges by their station position. This hopefully fixes segment assignment problems.2011-06-08, by Sascha L. Teichmann
- Berechnung 4: Added more debug output2011-06-08, by Sascha L. Teichmann
- #103 PART 1: The numbers which are written into the static DESCRIBE part are i18n formatted now.2011-06-08, by Ingo Weinzierl
- #93 Changed the name of calculation type 4.2011-06-08, by Ingo Weinzierl
- Made the chart range determination more robust against NaN values.2011-06-08, by Ingo Weinzierl
- Set the second y axis to axis position 1 (starts at 0).2011-06-08, by Ingo Weinzierl
- s@m³/s@m\\u00b3/s@2011-06-08, by Sascha L. Teichmann
- s@m³/s@m\u00b3/s@2011-06-08, by Sascha L. Teichmann
- Only generate an axis element if a axis really exists.2011-06-08, by Sascha L. Teichmann
- BackJumpCorrector: Simpified array swapping.2011-06-07, by Sascha L. Teichmann
- Use java.util.List instead of java.util.Vector. Removed superfluous imports.2011-06-07, by Sascha L. Teichmann
- code clean up in states2011-06-07, by Sascha L. Teichmann
- The ChartInfoGenerator appends axes range information to the document now.2011-06-07, by Ingo Weinzierl
- If Artifact.feed() fails do not store invalid values in database.2011-06-07, by Sascha L. Teichmann
- Removed asymmetrical "- 1" from width calculation.2011-06-06, by Sascha L. Teichmann
- Berechnung 4: Fixed problem when more than one value per segment are given.2011-06-05, by Sascha L. Teichmann
- Refactored version of "Berechnung 4"2011-06-05, by Sascha L. Teichmann
- #90 Removed margins between data area border and curves.2011-06-03, by Ingo Weinzierl
- Refactored the chart creation in the ChartInfoGenerators. Now, every chart is created by the XYChartGenerator again.2011-06-03, by Ingo Weinzierl
- Charts are zoomed to a specified view if the attribute document for the chart creation contains an x and/or y range.2011-06-03, by Ingo Weinzierl
- Set collection ttl to 6 hours.2011-06-02, by Sascha L. Teichmann
- Added parser for segments2011-06-01, by Sascha L. Teichmann
- Fix crashes in back jump correction.2011-06-01, by Sascha L. Teichmann
- The matrix that is used to transform chart image coordinates into chart coordinates supports inverted x-axis now.2011-06-01, by Ingo Weinzierl
- Introduced a new output generators for creating chart info documents.2011-06-01, by Ingo Weinzierl
- Added support for the 'type' parameter of the collection's out() operation.2011-05-31, by Ingo Weinzierl
- Use an explicit reference km for interpolation now.2011-05-31, by Sascha L. Teichmann
- Introduce a cache for the distance-info service2011-05-30, by Sascha L. Teichmann
- flys/issue82: Only successful interpolations are named.2011-05-30, by Sascha L. Teichmann
- Re-eanbled the calculation of the backjump correction.2011-05-27, by Sascha L. Teichmann
- Removed XML debug statement.2011-05-27, by Ingo Weinzierl
- Moved the code part that skips themes to a better place. This let us paint empty charts with no themes at all.2011-05-27, by Ingo Weinzierl
- We will no longer put deactivated themes into the chart.2011-05-27, by Ingo Weinzierl
- Fixed the process of creating and storing the attribute of a collection.2011-05-27, by Ingo Weinzierl
- Make "Berechnungsart 4" work independent of flow direction. Commented out back jump correction temporarily.2011-05-26, by Sascha L. Teichmann
- Generate fields for w/q input depend on flow direction.2011-05-26, by Sascha L. Teichmann
- Take the flow direction into account.2011-05-26, by Sascha L. Teichmann
- Round exploded values to a precision of 1e-6.2011-05-26, by Sascha L. Teichmann
- WST value table: Qs are now stored in ranges for each column.2011-05-25, by Sascha L. Teichmann
- First part of storing qs in ranges2011-05-24, by Sascha L. Teichmann
- Small bugfixes in the WQ selection state.2011-05-24, by Ingo Weinzierl
- ISSUE-40 (part I/II) Write values that the user had former selected / inserted into DESCRIBE document to preselect such data in the UI.2011-05-24, by Ingo Weinzierl
- Removed needless imports.2011-05-24, by Ingo Weinzierl
- ISSUE-85 (part III/III) Use the given kilometer values for the waterlevel computation.2011-05-24, by Ingo Weinzierl
- ISSUE-85 (part I/III) Added further fields for the location/range state.2011-05-24, by Ingo Weinzierl
- Moved WST value table cache key to a separate class.2011-05-24, by Sascha L. Teichmann
- Introduce model to store q values of WST columns efficiently.2011-05-23, by Sascha L. Teichmann
- ISSUE-62 (part I/II) States are no longer filled with data - if a state needs user input, it needs to query the owner artifact.2011-05-23, by Ingo Weinzierl
- Added a method to dump the artifacts state/data.2011-05-23, by Ingo Weinzierl
- flys/issue84: Forget to select wst kind.2011-05-23, by Sascha L. Teichmann
- fix for flys/issue81: km weights were swapped2011-05-20, by Sascha L. Teichmann
- Tagged release 2.3.1 of flys-artifacts.2011-05-20, by Ingo Weinzierl
- Prepared Changes for the upcoming release.2011-05-20, by Ingo Weinzierl
- Tagged RELEASE 2.4 of flys-client.2011-06-28, by Ingo Weinzierl
- #182 Initial WQ mode in adapted wq panel is now Q.2011-06-27, by Ingo Weinzierl
- Prepared Changes for the upcoming release.2011-06-27, by Ingo Weinzierl
- Removed trailing whitespace.2011-06-26, by Sascha L. Teichmann
- Removed superfluous imports.2011-06-26, by Sascha L. Teichmann
- #165 Set the max length of project names to 50 characters.2011-06-24, by Ingo Weinzierl
- Zoom-to-max-extent will zoom to the initial chart range now (without zoom values given).2011-06-24, by Ingo Weinzierl
- #21 Newly created projects cannot be opened twice.2011-06-24, by Ingo Weinzierl
- #170 Changed the DOM manipulation while zoom and drag operation.2011-06-23, by Ingo Weinzierl
- Prepare for AT export.2011-06-23, by Sascha L. Teichmann
- Removed the formatter for project names in the project list.2011-06-23, by Ingo Weinzierl
- Escape project's names in the project list.2011-06-23, by Ingo Weinzierl
- #165 (part 1) Added tooltips and table headers in the project list.2011-06-23, by Ingo Weinzierl
- Improved the exception handling.2011-06-23, by Ingo Weinzierl
- First version of error reports.2011-06-23, by Sascha L. Teichmann
- Stub for report service.2011-06-22, by Sascha L. Teichmann
- The adapted WQ panel now displays warnings if no information are present to validate user input.2011-06-22, by Ingo Weinzierl
- Register newly created CollectionViews at FLYSWorkspace to avoid an inconsistent view.2011-06-22, by Ingo Weinzierl
- Open projects are removed from screen if the user deletes them (via project list).2011-06-22, by Ingo Weinzierl
- Implemented the RPC stubs to set the TTL and name of a collection and to delete an existing collection.2011-06-22, by Ingo Weinzierl
- Added stubs to set the name and ttl of a collection and to delete a collection.2011-06-22, by Ingo Weinzierl
- Improved the project list - listeners are notified after setting the name and ttl of a project.2011-06-22, by Ingo Weinzierl
- Adapted a german string in the WQ panel.2011-06-22, by Ingo Weinzierl
- #104 The WQ panel now display the selected wq mode.2011-06-22, by Ingo Weinzierl
