graph
- Experimental caching of datacage recommendations. The respective hook is called a lot and running the datacage over and over again when loading data can be expensive. So the generated recommendations are cached for some time.2013-10-30, by Sascha L. Teichmann
- issue1512: Fix loading of all former flow vel. calculation via folder.2013-10-30, by Felix Wolfsteller
- issue1512: Show all flowvelocity facet in former calc. flow vel. part of dc.2013-10-30, by Felix Wolfsteller
- issue1571: i18n.2013-10-30, by Felix Wolfsteller
- issue1572: Call longitudinal-section-user-prototype for bedheight-diffs/year.2013-10-30, by Felix Wolfsteller
- Merged2013-10-30, by Sascha L. Teichmann
- Datacage: Remove tree branches vom datacage tree on client side which do not contain loadable data.2013-10-30, by Sascha L. Teichmann
- Simplified recommendattion monitor code a bit.2013-10-30, by Sascha L. Teichmann
- Code cleanup.2013-10-30, by Sascha L. Teichmann
- Fix for flys/issue1654: Divide through denisity, do not multiply.2013-10-30, by Sascha L. Teichmann
- Schema change: add lookup table for sediment yield kinds to have its values documented.2013-10-29, by Tom Gottfried
- flys/issue1625: Changed default sediment density factor from 1.8 to 1.9 . The value can be changed by adusting conf.xml (/artifact-databae/options/sediment-density-factor/text()).2013-10-29, by Sascha L. Teichmann
- Importer: document where annotations are searched for.2013-10-29, by Tom Gottfried
- run_geo.sh: allow logging as documented.2013-10-29, by Tom Gottfried
- issue1397: Fix reference_curve former calculations in dc.2013-10-29, by Felix Wolfsteller
- dc i18n.2013-10-29, by Felix Wolfsteller
- issue1512: Repair loading all of flowvelocitymeasurements by not equipping2013-10-29, by Felix Wolfsteller
- inor Layout + Wiki2013-10-28, by Andre Heinecke
- Rechtschreibkorrektur (durchgeführt von Bettina)2013-10-28, by Andre Heinecke
- More installation documentation2013-10-28, by Andre Heinecke
- issue1345: Sort sediment densities by year.2013-10-28, by Felix Wolfsteller
- meta-data.xml: Simplify query for densities a bit, sort by depth.2013-10-28, by Felix Wolfsteller
- Start installation documentation for specific client installation2013-10-27, by Andre Heinecke
- Importer doc: fix some outdated or wrong infos.2013-10-25, by Tom Gottfried
- Importer and doc: Warn instead of die if AT- or STA-file is missing for a gauge.2013-10-25, by Tom Gottfried
- FacetTypes: Cosmetics.2013-10-25, by Felix Wolfsteller
- Declare certain bedheight-diagrams as charttypes, for manual points.2013-10-25, by Felix Wolfsteller
- meta-data.xml: Include bedheight-diffs per year in minfo-user-dc.2013-10-25, by Felix Wolfsteller
- meta-data.xml: Subsume the different bed-quality dc-nodes.2013-10-25, by Felix Wolfsteller
- i18n for dc added.2013-10-25, by Felix Wolfsteller
- meta-data.xml: Ease i18nability.2013-10-25, by Felix Wolfsteller
- Geoimporter: be case-insensitive when looking for floodplains.2013-10-25, by Tom Gottfried
- make-opt-package.sh: give path to internal 'repository'.2013-10-25, by Tom Gottfried
- meta-data.xml: Remove duplicates and 'special' macros fro special outs from2013-10-25, by Felix Wolfsteller
- meta-data.xml: Remove delta-wt from longitudinal-section-user-prototype .2013-10-25, by Felix Wolfsteller
- Fix Typo in german i18n (e.g. issue1345) .2013-10-25, by Felix Wolfsteller
- Partly revert rev 7419, conservative guess about which "outs" are handcrafted.2013-10-23, by Felix Wolfsteller
- Experimental patch: Do not run datacage on artifacts that are loaded from datacage. His hopefully minimizes the datacage runs when a lot of data is loaded.2013-10-25, by Sascha L. Teichmann
- Importer doc: fix some layout issues.2013-10-24, by Tom Gottfried
- Made SedimentDensityValue Serializable.2013-10-23, by Felix Wolfsteller
- issue1345: Re-enable sediment load total loads, now that factory is fixed.2013-10-23, by Felix Wolfsteller
- Fix total sediment load fetching.2013-10-23, by Felix Wolfsteller
- issue1345: Showing sediment densitie by depth, comment total load.2013-10-23, by Felix Wolfsteller
- Fix typo.2013-10-23, by Tom Gottfried
- (issue965) Handle the case that diffids are not available2013-10-23, by Andre Heinecke
- meta-data.xml: Be less restrictive in showing facets from waterlevels-discharge.2013-10-23, by Felix Wolfsteller
- meta-data.xml: Exclude empty.facet s.2013-10-23, by Felix Wolfsteller
- meta-meta.xml: Also fetch extreme_base curves via dc.2013-10-23, by Felix Wolfsteller
- meta-data.xml: cosmetics.2013-10-23, by Felix Wolfsteller
- Add another axis (height) to longitudinal-diagram-defaults.2013-10-23, by Felix Wolfsteller
- meta-data.xml: Cosmetics.2013-10-23, by Felix Wolfsteller
- meta-data.xml: More usage of collection-group-macro.2013-10-23, by Felix Wolfsteller
- Datacage: Consequently call macro 'longitudinal-section-user-prototype' in all longitudinal sections of old calculation. Moved asymmeterical stuff to prototype. This may crash!2013-10-23, by Sascha L. Teichmann
- meta-data.xml: Create and use collection-group macro.2013-10-23, by Felix Wolfsteller
- BedHeightSingleParser: fix no-data-line detection.2013-10-23, by Tom Gottfried
- Datacage ref doc: More docs on functions.2013-10-23, by Sascha L. Teichmann
- Datacage ref doc: More docs for functions.2013-10-22, by Sascha L. Teichmann
- issue1205: made SedimentDensity serializable.2013-10-22, by Felix Wolfsteller
- meta-data.xml: Switch more longitudinal-section like user-dc content to prototype macro.2013-10-22, by Felix Wolfsteller
- Datacage: Fixed macro call.2013-10-22, by Sascha L. Teichmann
- Fixed meta-data.xml2013-10-22, by Sascha L. Teichmann
- Datacage ref doc: More doc for functions.2013-10-22, by Sascha L. Teichmann
- issue1512: Sort flow-velocity-models by discharge_zone.value.2013-10-22, by Felix Wolfsteller
- issue1473: Show differences project name in dc.2013-10-22, by Felix Wolfsteller
- meta-data.xml: Fix referenced out for discharge_longitudinal_section.2013-10-22, by Felix Wolfsteller
- (issue965) Add a comment to explain what we do here2013-10-21, by Andre Heinecke
- (issue965) Use new datacage magic to have year filtering for bedheights2013-10-21, by Andre Heinecke
- Importer doc: mention flow direction retrieval from WST.2013-10-21, by Tom Gottfried
- Removed dc:to-date(). Added 'date' type for <dc:convert> instead.2013-10-21, by Sascha L. Teichmann
- issue1521: Adhere more to dc 'spec', show discharges of flow velocity models.2013-10-21, by Felix Wolfsteller
- Datacage reference doc: Explain dc:container-context and dc:properties.2013-10-21, by Sascha L. Teichmann
- Datacage: Added TODOs for new functions in ref document.2013-10-21, by Sascha L. Teichmann
- issue1512: Make double entry of Q facet for flowvelocities dissappear.2013-10-21, by Felix Wolfsteller
- Fix typo in german i18n.2013-10-18, by Felix Wolfsteller
- issue1512: improved i18n for flow velocity measurement facets.2013-10-18, by Felix Wolfsteller
- BedHeightProcessor: Finally display heights, not widths.2013-10-17, by Felix Wolfsteller
- BedHeightProcessor: Set axis label.2013-10-17, by Felix Wolfsteller
- BedHeight(Sounding)Processor: Use FacetTypes.2013-10-17, by Felix Wolfsteller
- Removed debris.2013-10-17, by Felix Wolfsteller
- Moved BedHeightEpoch to BedHeightEpochData.2013-10-17, by Felix Wolfsteller
- Renamed artifacts/**/BedHeight(Single) to BedHeight(Single)Data, to resolve2013-10-17, by Felix Wolfsteller
- Stub for new BedHeightProcessor.2013-10-17, by Felix Wolfsteller
- BedHeightSoundingProcessor: Log if data is now handled.2013-10-17, by Felix Wolfsteller
- BedHeightSoundingProcessor: refactored to avoid drifting behavior when using2013-10-17, by Felix Wolfsteller
- meta-data.xml: cleanup longitudinal-section-user-prototype, removing dupes.2013-10-17, by Felix Wolfsteller
- Removed same package import.2013-10-21, by Sascha L. Teichmann
- Removed obsolete import.2013-10-21, by Sascha L. Teichmann
- Datacage: Add function dc:to-date(number) which converts a epoch base number to a date object.2013-10-18, by Sascha L. Teichmann
- Datacage: Added dc:min-number(list) and dc:max-number(list) to extract the numerical2013-10-18, by Sascha L. Teichmann
- Datacage: Add function dc:find-all(needle, haystack).2013-10-18, by Sascha L. Teichmann
- (issue1474) Fix deepCopy signatures and actually copy the facet index now2013-10-18, by Andre Heinecke
- (issue1071) Handle the case where no MeasurementStation exists2013-10-18, by Andre Heinecke
- More datacage ref doc.2013-10-17, by Sascha L. Teichmann
- (issue1474) Fix copying of SQ* Facets2013-10-17, by Andre Heinecke
- Importer: Avoid 0-lenght Q-ranges in WST-CSV-parsers.2013-10-17, by Tom Gottfried
- Replaced more tabs with spaces + minor cosmetics (removed out commented code from double precision branch).2013-10-17, by Sascha L. Teichmann
- Replaced tabs with 4 spaces.2013-10-17, by Sascha L. Teichmann
- WstParser: Do not add Q-range for trailing Q-line.2013-10-17, by Tom Gottfried
- Removed obsolete imports.2013-10-17, by Sascha L. Teichmann
- Removed obsolete import + whitespace cleanup.2013-10-17, by Sascha L. Teichmann
- Add getModelDescription to FlowVelocityModel.2013-10-17, by Felix Wolfsteller
- White space cosmetics, added debug output.2013-10-17, by Felix Wolfsteller
- SedimentYieldArtifact: Accept 'total' load, genreate facet for it.2013-10-17, by Felix Wolfsteller
- FlowVelocityModelArtifact: Slightly improve facet names.2013-10-17, by Felix Wolfsteller
- Cosmetics.2013-10-17, by Felix Wolfsteller
- Cosmetics.2013-10-17, by Felix Wolfsteller
- issue1473: Let vollmer curves appear under 'former calc/waterlevels from fix.'.2013-10-17, by Felix Wolfsteller
- cosmetics.2013-10-17, by Felix Wolfsteller
- Adjusted i18n to match the one in client.2013-10-16, by Felix Wolfsteller
- Use more failsave pattern for SQ-facets.2013-10-16, by Andre Heinecke
- Configure correct name for SQ-relation C-chart.2013-10-16, by Andre Heinecke
- i18n for total load dc.2013-10-16, by Felix Wolfsteller
- Offer total loads in dc.2013-10-16, by Felix Wolfsteller
- Added i18n for upcoming total load via dc.2013-10-16, by Felix Wolfsteller
- Refactoring: Move functionality of BedHeightAccess into BedHeightFacet for now.2013-10-16, by Felix Wolfsteller
- Minor BedHeightAccess refactoring.2013-10-16, by Felix Wolfsteller
- Remove code that was previously commented out.2013-10-16, by Tom Gottfried
- BedHeightSingleParser: do not omit lines if last column is empty.2013-10-16, by Tom Gottfried
- Jim, he's dead.double-precision 2013-10-16, by Sascha L. Teichmann
- Merged double-precision branch.2013-10-16, by Sascha L. Teichmann
- Merge branch defaultdouble-precision 2013-10-16, by Sascha L. Teichmann
- Reorder generation of static part of describe document for fast XML DOM handling.2013-10-16, by Sascha L. Teichmann
- (issue1353) Document that there are more things to syncing then just the Number2013-10-16, by Andre Heinecke
- (issue1474) Add sqrelation user data and disable filtering for it2013-10-16, by Andre Heinecke
- Add debug output for variables in user context2013-10-16, by Andre Heinecke
- Break sometimes when dumping variables. Still ugly but a bit nicer.2013-10-15, by Andre Heinecke
- Importer doc: fix syntax error.double-precision 2013-10-16, by Tom Gottfried
- BedHeightSingleParser: do not log every data line in file.double-precision 2013-10-16, by Tom Gottfried
- Do not log trace of WST-Parser parse exception and document it.double-precision 2013-10-15, by Tom Gottfried
- WST-Parser: check consistence of station ordering in file.double-precision 2013-10-15, by Tom Gottfried
- Comments.double-precision 2013-10-15, by Tom Gottfried
- Merged changes from default into double precision branch.double-precision 2013-10-15, by Tom Gottfried
- WST Import: Added parse error exception to WST parser.2013-10-15, by Sascha L. Teichmann
- typo fix in doc.2013-10-15, by Felix Wolfsteller
- BedHeightsArtifact: Use FacetTypes, eliminate local facet type definition.2013-10-15, by Felix Wolfsteller
- Prepare new facet types for bedheights.2013-10-15, by Felix Wolfsteller
- i18n for old calculations dc.2013-10-15, by Felix Wolfsteller
- Importer manual: use unique revision identifier.double-precision 2013-10-15, by Tom Gottfried
- Add aforementioned user-prototype.2013-10-15, by Felix Wolfsteller
- Prototypically add longitudinal-section-user-prototype, with issues.2013-10-15, by Felix Wolfsteller
- Importer packaging: run pdflatex three times to get references and page numbering right.double-precision 2013-10-15, by Tom Gottfried
- issue1345: Show bedheight_type in tooltip.2013-10-15, by Felix Wolfsteller
- issue1345: Bring back waterlevel/diffs from fixation into minfo dc element.2013-10-15, by Felix Wolfsteller
- Fix DC group-by statement, there is no 'oid' variable around.2013-10-15, by Felix Wolfsteller
- issue1345: DC: group bed heights of single years by year.2013-10-15, by Felix Wolfsteller
- Importer: skip historical discharge tables per default as they come via ETL.double-precision 2013-10-15, by Tom Gottfried
- Add warning on errors when importing duplicates.double-precision 2013-10-15, by Tom Gottfried
- issue1345: Fix sediment load facet type, adjust theme name.2013-10-14, by Felix Wolfsteller
- have same translations for sediment loads fractions.2013-10-14, by Felix Wolfsteller
- Datacage doc ref: Explain dc:group2013-10-14, by Sascha L. Teichmann
- Datacage ref doc: Explain dc:filter.2013-10-14, by Sascha L. Teichmann
- Datacage ref doc: Move dc:if & dc:choose up because they are more important than other elements.2013-10-14, by Sascha L. Teichmann
- Datacage ref doc: Explain dc:for-each2013-10-14, by Sascha L. Teichmann
- Datacage ref doc: Explain dc:virtual-column.2013-10-14, by Sascha L. Teichmann
- Datacage ref doc: Explain dc:macro & Co.2013-10-14, by Sascha L. Teichmann
- Datacage ref doc: Explain dc:variable and dc:convert.2013-10-14, by Sascha L. Teichmann
- Dataage ref doc: Explain dc:context, dc:comment2013-10-14, by Sascha L. Teichmann
- Datacage ref doc: More structure. Explain text interpolation.2013-10-14, by Sascha L. Teichmann
- Added sedimentdensity i18n.2013-10-14, by Felix Wolfsteller
- issue1345: Added getDepth() to SedimentDensityFactory.2013-10-14, by Felix Wolfsteller
- issue1345: Change Sediment Density Facet label.2013-10-14, by Felix Wolfsteller
- SedimentDensityProcessor: Fix, use getAllDensities instead of only dens. in year 2006.2013-10-14, by Felix Wolfsteller
- SedimentDensity: Fix getAllDensities and made it public.2013-10-14, by Felix Wolfsteller
- i18n for dc and facet name generation.2013-10-14, by Felix Wolfsteller
- cosmetics.2013-10-14, by Felix Wolfsteller
- issue1345: Adjust name of sediment yield/load facets to include fraction name and times.2013-10-14, by Felix Wolfsteller
- issue1345: Prepare SedimentLoadFactory to deliver fraction name and time ranges.2013-10-14, by Felix Wolfsteller
- cosmetics.2013-10-14, by Felix Wolfsteller
- Comment in meta-data.xml.2013-10-14, by Felix Wolfsteller
- cosmetical description fix.2013-10-14, by Felix Wolfsteller
- Removed obsolete imports.2013-10-12, by Sascha L. Teichmann
- (issue1529) Be more tolerant in the fitting.2013-10-11, by Andre Heinecke
- (issue1529) Only interpolate within a step limit in WQ diagram2013-10-11, by Andre Heinecke
- Polish SQ Datacage and Facets2013-10-11, by Andre Heinecke
- doc fix <3 .2013-10-11, by Felix Wolfsteller
- doc fix.2013-10-11, by Felix Wolfsteller
- Doc typo fix.2013-10-11, by Felix Wolfsteller
- issue1345: include fix for display of epochs stoptime.2013-10-11, by Felix Wolfsteller
- issue1512: conf.xml: configure flowvelocitymodel artifact-factory.2013-10-11, by Felix Wolfsteller
- issue1512: Adde flow-velocity-models dc conf.2013-10-11, by Felix Wolfsteller
- issue1345: Added accidentally ommitted i18n for sedimentload dc.2013-10-11, by Felix Wolfsteller
- issue1512: spawn more facets for FlowVelocityMeasurementArtifact .2013-10-11, by Felix Wolfsteller
- issue1512: Adjusted Q and WOutProcessors to handle data2013-10-11, by Felix Wolfsteller
- More doc fixes.2013-10-11, by Felix Wolfsteller
- Processor: Doc.2013-10-11, by Felix Wolfsteller
- issue1512: Added method to get FlowVelocityModel by id.2013-10-11, by Felix Wolfsteller
- issue1512: Initial commit of FlowVelocityModelArtifact.2013-10-11, by Felix Wolfsteller
- issue1512: FlowVelocityCalculation: Opened prepareData(), added doc.2013-10-11, by Felix Wolfsteller
- issue1512: Added comment, opened constructor as we will reuse this class.2013-10-11, by Felix Wolfsteller
- issue1512: Prepare new facet types for flow velocity model facet, add comment.2013-10-11, by Felix Wolfsteller
- Fixings overview panel: Send valid encoded JSON filters to server part of the client.2013-10-10, by Sascha L. Teichmann
- issue1345: Factored out description creation for loads. Make epochs show end time.2013-10-10, by Felix Wolfsteller
- issue1345: Added macro for the differing epoch-description, extended query.2013-10-10, by Felix Wolfsteller
- issue1345: Minor refactoring, made structure for epoch loads equal year loads.2013-10-10, by Felix Wolfsteller
- issue1345: Show fraction and year for sediment load dc subtree.2013-10-10, by Felix Wolfsteller
- Revert 7273, add undefined macro to meta-data.xml.2013-10-10, by Felix Wolfsteller
- Remove annotations from reference curve recommendations. There is no km-axis.2013-10-09, by Tom Gottfried
- DC: Remove accidentaly used user-macro from system-content part.2013-10-09, by Sascha L. Teichmann
- Removed calls to undefined macro.2013-10-09, by Sascha L. Teichmann
- Removed duplicate macro.2013-10-09, by Sascha L. Teichmann
- Added check for duplicate macros.2013-10-09, by Sascha L. Teichmann
- Little workaround not to crash uf there is no theme style. TODO: Figure out why the theme style is null at this point.2013-10-09, by Sascha L. Teichmann
- fixed typo.2013-10-09, by Tom Gottfried
- Vollmer curve: Added facet for generating error report.2013-10-09, by Sascha L. Teichmann
- meta-data.xml: Add more entries to discharge datacage ('user-part').2013-10-09, by Felix Wolfsteller
- meta-data.xml: Let DC show (yet all) computed discharge curves as former calculations.2013-10-09, by Felix Wolfsteller
- meta-data.xml: Refactored discharge-curve-prototype.2013-10-09, by Felix Wolfsteller
- meta-data.xml: Add a macro to load previous discharge calculations.2013-10-09, by Felix Wolfsteller
- BedHeightsArtifact: Import 'river' data, for use in "New Chart"-settings.2013-10-08, by Felix Wolfsteller
- RangeAccess: Use min/max as from/to in RangeAccess.2013-10-08, by Felix Wolfsteller
- Refactoring: Let RiverAccess.getRiver return an River.2013-10-08, by Felix Wolfsteller
- issue1490: Fix text annotations of latest points.2013-10-08, by Felix Wolfsteller
- issue1490: Translate other points as well, when at gauge.2013-10-08, by Felix Wolfsteller
- issue1490: Translate text annotations position when displaying w/q- curve at gauge.2013-10-08, by Felix Wolfsteller
- Minor code simplification.2013-10-08, by Felix Wolfsteller
- ETL: Added repair XSLT script to rename value of GEWAESSER attribute 'Untere Havel-Wasserstraße (UHW)' with 'Havel'.2013-10-07, by Sascha L. Teichmann
- First draft of a german reference document for datacage elements and functions written in reStructuredText. Lots of TODOs.2013-10-06, by Sascha L. Teichmann
- Reduce usage of careless 'for (int i = 0; i < x.size(); i++)' pattern.2013-10-05, by Sascha L. Teichmann
- Repaced some tabs by spaces.2013-10-05, by Sascha L. Teichmann
- Replaced some tabs by spaces. Guys, please configure your editors not to insert tabs!2013-10-05, by Sascha L. Teichmann
- Removed trailing whitespace.2013-10-05, by Sascha L. Teichmann
- Removed trailing whitespace.2013-10-05, by Sascha L. Teichmann
- Remove obsolete same package import.2013-10-05, by Sascha L. Teichmann
- Removed trailing whitespace.2013-10-05, by Sascha L. Teichmann
- Remove obsolete import.2013-10-05, by Sascha L. Teichmann
- Check for inverted setting later.2013-10-04, by Andre Heinecke
- Code simplification + moved code out of inner loop.2013-10-04, by Sascha L. Teichmann
- Remove boundToOut facet pass. This is now only done if we filtered before.2013-10-04, by Andre Heinecke
- Fix SQOverview the new generators need the master artifact set.2013-10-04, by Andre Heinecke
- Polish labels and remove unused classes. SQOverview is currently broken.2013-10-04, by Andre Heinecke
- Add new option to diagram axes "logarithmic" that can be set to an evaluator2013-10-04, by Andre Heinecke
- Add SQRelation Processor2013-10-04, by Andre Heinecke
- Configure SQ Relations to use new diagram way2013-10-04, by Andre Heinecke
- Remove SQ Generator Subclasses for A-F2013-10-02, by Andre Heinecke
- Remove obsolete classes2013-10-02, by Andre Heinecke
- (issue1474) Add datacage loading for SQ Relations2013-10-02, by Andre Heinecke
- Silence overly spammy debug output2013-10-01, by Andre Heinecke
- Removed TODO which was already done.2013-10-04, by Felix Wolfsteller
- issue1345: call longitudinal-section-prototype macro for flow-veloc. DC. Added todo.2013-10-04, by Felix Wolfsteller
- issue 1345: Let sediment-load dc-config call longitdunal-section-prototype macro.2013-10-04, by Felix Wolfsteller
- issue1345: Also let bed-quality use longitudinal-section-prototype.2013-10-04, by Felix Wolfsteller
- issue1345: adjust dc-conf for befheight-diffs: is now longitudinal-section-prototype.2013-10-04, by Felix Wolfsteller
- issue1345: meta-data.xml: For bedheight_middle, use the longitudinal-section-prototype.2013-10-04, by Felix Wolfsteller
- Global facet filtering with bound to out: The DiagramAttributes implements the FacetFilter and not the Generators.2013-10-02, by Sascha L. Teichmann
- Use diagram configuration and there processors to define compatible facets in loaded data.2013-10-02, by Sascha L. Teichmann
- Made lookup for generators a class of its own. First step to use it as a compat filter for facets, too.2013-10-02, by Sascha L. Teichmann
- meta-meta.xml: remove debugging info content.2013-10-02, by Felix Wolfsteller
- issue1345: add flowvelocity-macro to winfo longitudinal-section.2013-10-02, by Felix Wolfsteller
- issue1435: DC layout for sediment-loads more the way its requested.2013-10-02, by Felix Wolfsteller
- WST-parser: making ranges tightly fit was broken since a<b was enforced. Re-enabled.double-precision 2013-10-01, by Tom Gottfried
- Range importer: Do not allow to set invalid a or b.double-precision 2013-10-01, by Tom Gottfried
- issue1435: For Sediment Density Facets, use densities name/description.2013-10-01, by Felix Wolfsteller
- issue1435: SedimentDensityFactory: Changed variable name of query to reflect2013-10-01, by Felix Wolfsteller
- issue1435: Add bedheights and morph. width to LS DC conf.2013-10-01, by Felix Wolfsteller
- (issue1353) Document station check and warn message2013-10-01, by Andre Heinecke
- Bring themes back into sync.2013-10-01, by Sascha L. Teichmann
- Doc.2013-09-30, by Felix Wolfsteller
- Initial commit of sediment density processor.2013-09-30, by Felix Wolfsteller
- FlowVelocityGenerator: Simplify code a bit, master and its river is2013-09-30, by Felix Wolfsteller
- SedimentDensityFactory: query densities by id only (not year).2013-09-30, by Felix Wolfsteller
- issue1435: Add sedimentyield and sedimentdensity artifact factories to conf.xml.2013-09-30, by Felix Wolfsteller
- i18n for densities.2013-09-30, by Felix Wolfsteller
- issue1435: Call densities-macro of meta-data.xml thus show densities in datacage.2013-09-30, by Felix Wolfsteller
- issue1435: Add densities-macro to meta-data.xml .2013-09-30, by Felix Wolfsteller
- issue1435: Add SedimentDensityProcessor to longitudinal-diagram-defaults.xml to2013-09-30, by Felix Wolfsteller
- issue1435: SedimentDensityFacet: Access sediment density data.2013-09-30, by Felix Wolfsteller
- Cleaned imports.2013-09-30, by Felix Wolfsteller
- issue1435: Store id of sediment yield only.2013-09-30, by Felix Wolfsteller
- Cleaned imports.2013-09-30, by Felix Wolfsteller
- Cleaned imports, added todo about naming.2013-09-30, by Felix Wolfsteller
- issue1435: Added new sediment.density facet type.2013-09-30, by Felix Wolfsteller
- issue1435: Add methods to get data in StyledSeriesBuilder-friendly format, doc.2013-09-30, by Felix Wolfsteller
- issue1435: Stubs for SedimentDensityFacet and -Artifact.2013-09-30, by Felix Wolfsteller
- issue1435: Prepare SedimentDensityFactory to delive data by sedimentdesity.id and .year.2013-09-30, by Felix Wolfsteller
- Doc fix.2013-09-30, by Felix Wolfsteller
- SedimentYieldArtifact: Removed unneeded documentation, removed but added one TODO.2013-09-30, by Felix Wolfsteller
- issue1435: Remove hardcoded river for dc sediment yield sql query.2013-09-27, by Felix Wolfsteller
- Remove method which was accidentally merged back from default.double-precision 2013-09-27, by Tom Gottfried
- Merged changes from default into double-precision branch.double-precision 2013-09-27, by Tom Gottfried
- Added accidentally omitted i18n.2013-09-27, by Felix Wolfsteller
- issue1435: In DC conf, show sedimentyields in yield/[year|epoch]- structure, i18n.2013-09-27, by Felix Wolfsteller
- issue1435: meta-data.xml: Add sedimentload/yield- part to minfo part of dc.2013-09-27, by Felix Wolfsteller
- SedimentLoadProcessor: Add debug output when handling an out.2013-09-27, by Felix Wolfsteller
- Doc.2013-09-27, by Felix Wolfsteller
- StaticState: doc.2013-09-27, by Felix Wolfsteller
- issue1435: SedimentYieldArtifact: Add functionality.2013-09-27, by Felix Wolfsteller
- SedimentLoadFactory: Added method to quickly get the description of a given load.2013-09-27, by Felix Wolfsteller
- SedimentLoadFactory: Fix query, added comment about correctness of2013-09-27, by Felix Wolfsteller
- flys/issue1500: The main wst file determines km_up now.2013-09-27, by Sascha L. Teichmann
- Initial commit for untested standalone sediment yield artifact.2013-09-26, by Felix Wolfsteller
- issue1435: Add method to SedimentLoadFactory to fetch a SedimentLoad by id.2013-09-26, by Felix Wolfsteller
- issue1435: Minor refactoring that will come handy to load SedimentLoads2013-09-26, by Felix Wolfsteller
- Added tag 3.0.16 for changeset 12248d9eb3262013-09-26, by Andre Heinecke
- Only filter the facets for unbound outs3.0.16 2013-09-26, by Andre Heinecke
- Fix wrong usage of a_id and add more datacage stuff to WSPL longitundinal2013-09-26, by Andre Heinecke
- Fix Y-Axis order for default longituidnals2013-09-26, by Andre Heinecke
- Save target_out in the recommendation to ensure it is sent to the server2013-09-26, by Andre Heinecke
- Filter waterleveldifferences according to unit.2013-09-26, by Tom Gottfried
- Filter prefix of descriptions of MINFO-WSTs.2013-09-26, by Tom Gottfried
- Move MINFO-fixation-stuff to MINFO-datacage and give specified names.2013-09-26, by Tom Gottfried
- issue1435: Group minfo-stuff in dc, include waterlevels from csv.2013-09-26, by Felix Wolfsteller
- Removed obsolete imports.2013-09-26, by Sascha L. Teichmann
- Factor out longitudinal section default config and put it in its own file2013-09-26, by Andre Heinecke
- Saveguard range access in case an artifact has no range2013-09-26, by Andre Heinecke
- Add debug output triggered by debugging the last commit2013-09-26, by Andre Heinecke
- TRUE != FALSE ;)2013-09-26, by Andre Heinecke
- Add ShearStress Processor2013-09-26, by Andre Heinecke
- Cosmetics2013-09-26, by Andre Heinecke
- Handle flow velocity discharge in the new part of the QOutProcessor2013-09-26, by Andre Heinecke
- Handle flow velocity measurements in the FlowVelocity processor2013-09-26, by Andre Heinecke
- Handle flow velocity annotation in annoation processor2013-09-26, by Andre Heinecke
- Diagram attributes: Use evaluators for title arguments, too. This makes it more consistent, powerful and a little bit faster.2013-09-26, by Sascha L. Teichmann
- Removed obsolete imports.2013-09-26, by Sascha L. Teichmann
- Use LongitudinalSectionGenerator2 in the LS diagrams.2013-09-26, by Andre Heinecke
- Add startkm and endkm setting to longitudinal section generator 22013-09-26, by Andre Heinecke
- Add NPE guard to XYStyle.2013-09-25, by Andre Heinecke
- Add FlowVelocity Processor2013-09-25, by Andre Heinecke
- Configure SedimentLoad to use the new diagram Generator2013-09-25, by Andre Heinecke
- Add SedimentLoadProcessor2013-09-25, by Andre Heinecke
- Noted insights.2013-09-26, by Felix Wolfsteller
- issue1493: Also transform NaN X values to empty string.2013-09-25, by Felix Wolfsteller
- Configure BedQuality to use new DiagramGenerator2013-09-25, by Andre Heinecke
- Remove obsolete classes2013-09-25, by Andre Heinecke
- Add BedQuality Processors2013-09-25, by Andre Heinecke
- Configure bed_difference_year in the new way2013-09-25, by Andre Heinecke
- Add label for bed difference axis2013-09-25, by Andre Heinecke
- Add BedWidthProcessor to handle width facets2013-09-25, by Andre Heinecke
- Rename BedWidthProcessor to BedHeightSounding processor.2013-09-25, by Andre Heinecke
- Diagrams: Determine if axis should be inverted dynamically.2013-09-25, by Sascha L. Teichmann
- Configure BedDiffYear diagram and remove old generator2013-09-25, by Andre Heinecke
- Doc.2013-09-25, by Felix Wolfsteller
- issue971: Include encoding parameter hardwiredly in csv export panels2013-09-25, by Felix Wolfsteller
- issue971: Let ExportServiceImpl handle encoding parameter,2013-09-25, by Felix Wolfsteller
- issue971: For diagram csv export request windows-1252 encoded output.2013-09-25, by Felix Wolfsteller
- issue971: Prepare client to include encoding in download url.2013-09-25, by Felix Wolfsteller
- issue971: Let ChartOutputServiceImpl interprete an "encoding" parameter.2013-09-25, by Felix Wolfsteller
- Doc.2013-09-25, by Felix Wolfsteller
- Full stop at doc sentence end.2013-09-23, by Felix Wolfsteller
- Fix diagram title2013-09-25, by Andre Heinecke
- Remove obsolete MiddleBedHeightGenerator classes2013-09-25, by Andre Heinecke
- Configure MiddleBedHeight diagram2013-09-25, by Andre Heinecke
- Remove wrong docstring2013-09-25, by Andre Heinecke
- Also handle bed height annotations2013-09-25, by Andre Heinecke
- Rename BedheightProcessor to BedWidthProcessor2013-09-25, by Andre Heinecke
- Add axis label to bedheight processor.2013-09-25, by Andre Heinecke
- Add MiddleBedHeightProcessor2013-09-25, by Andre Heinecke
- Add dW handling also to the other new longitudinal section diagrams2013-09-25, by Andre Heinecke
- Configure Longitudinal section diagram to use the new way.2013-09-24, by Andre Heinecke
- Add currentKM context / request mapping to RiverUtils and use it in DiagramGenerator2013-09-24, by Andre Heinecke
- Handle multiple processors for axis labeling.2013-09-24, by Andre Heinecke
- Cosmetics2013-09-24, by Andre Heinecke
- Add DeltaWProcessor to process data for a delta W axis.2013-09-24, by Andre Heinecke
- Fix area label rendering.2013-09-24, by Andre Heinecke
- Removed obsolete imports. Minor code cosmetics.2013-09-24, by Sascha L. Teichmann
- Close generator-refactoringgenerator-refactoring 2013-09-24, by Andre Heinecke
- Merge branch generator-refectoring into default.2013-09-24, by Andre Heinecke
- Migrate w_differences and remove unused classesgenerator-refactoring 2013-09-24, by Andre Heinecke
- Actually commit the canHandle part of the last revision. (WQCKms in WOut proc.)generator-refactoring 2013-09-24, by Andre Heinecke
- Process corrected WQkms (WQCKms) also in the WOutProcessorgenerator-refactoring 2013-09-24, by Andre Heinecke
- Fix applying the inversion of diagrams.generator-refactoring 2013-09-24, by Andre Heinecke
- Migrate discharge_longitudinal_section generator to the new architecture.generator-refactoring 2013-09-24, by Andre Heinecke
- Reactivate CALCULATION_DISCHARGE_LONGITUDINAL_CURVEgenerator-refactoring 2013-09-24, by Andre Heinecke
- Also handle subtypes of Discharge longitundial Q facets.generator-refactoring 2013-09-24, by Andre Heinecke
- Default to the label of longitundial Q axis in the QProcessorgenerator-refactoring 2013-09-24, by Andre Heinecke
- Handle axis include zero setting for the new processing architecturegenerator-refactoring 2013-09-24, by Andre Heinecke
- Minor cleanup / docgenerator-refactoring 2013-09-24, by Andre Heinecke
- Add refactored LongitudinalSectionGenerator2 that inherits DiagramGeneratorgenerator-refactoring 2013-09-23, by Andre Heinecke
- Add more Inversion logic to the DiagramGeneratorgenerator-refactoring 2013-09-23, by Andre Heinecke
- Add AxisLabel handling to WDiffProcessorgenerator-refactoring 2013-09-23, by Andre Heinecke
- Add WDiffProcessorgenerator-refactoring 2013-09-23, by Andre Heinecke
- Add AreaProcessorgenerator-refactoring 2013-09-23, by Andre Heinecke
- Added diagram attributes as converter to longitudinal section diagrams.generator-refactoring 2013-09-23, by Sascha L. Teichmann
- Use pre-converted diagram attributes now.generator-refactoring 2013-09-23, by Sascha L. Teichmann
- Fix domain axis label and add manualpoints processor to configgenerator-refactoring 2013-09-23, by Andre Heinecke
- Move manual point handling into a Processorgenerator-refactoring 2013-09-23, by Andre Heinecke
- Add useful debug output for diagram generator debugginggenerator-refactoring 2013-09-23, by Andre Heinecke
- issue1493: Don't let NaNs slip through csv export.2013-09-23, by Felix Wolfsteller
- Minor refactoring for 1493.2013-09-23, by Felix Wolfsteller
- Add DiagramGenerator doOut functiongenerator-refactoring 2013-09-23, by Andre Heinecke
- Add DiagramGenerator doOut functiongenerator-refactoring 2013-09-23, by Andre Heinecke
- Simplify code to prepare DiagramGenerator signaturegenerator-refactoring 2013-09-23, by Andre Heinecke
- Add more proessors to longitudinal diagramgenerator-refactoring 2013-09-23, by Andre Heinecke
- Remove accidental commited debug linegenerator-refactoring 2013-09-23, by Andre Heinecke
- Removed obsolete imports.generator-refactoring 2013-09-22, by Sascha L. Teichmann
- Use Object instead of DOM Element as argument for setup of out generators. First step to remove dependency to XML DOM when using configuration.generator-refactoring 2013-09-22, by Sascha L. Teichmann
- Little workaround to make diagram attribute parsing more thread safe. This is not the right solution.generator-refactoring 2013-09-22, by Sascha L. Teichmann
- Moved generators to separate xml file.generator-refactoring 2013-09-22, by Sascha L. Teichmann
- Implement Label handlinggenerator-refactoring 2013-09-20, by Andre Heinecke
- Add info generator for refactored generatorsgenerator-refactoring 2013-09-20, by Andre Heinecke
- Remove generator2 hacksgenerator-refactoring 2013-09-20, by Andre Heinecke
- Simplyfy / unify "invert axis" logicgenerator-refactoring 2013-09-20, by Andre Heinecke
- Removed faked ChartInfoGenerator2 and LS Info generator.generator-refactoring 2013-09-20, by Sascha L. Teichmann
- ChartGenerator2 can be used as ChartInfoGenerator, too.generator-refactoring 2013-09-20, by Sascha L. Teichmann
- Mergedgenerator-refactoring 2013-09-20, by Sascha L. Teichmann
- Extended init() of OutGenerator to take name of the out to serve.generator-refactoring 2013-09-20, by Sascha L. Teichmann
- Add LTR inversion code to diagram generator.generator-refactoring 2013-09-20, by Andre Heinecke
- More Processor refactoringgenerator-refactoring 2013-09-20, by Andre Heinecke
- Trim "names" and "class" attribute of out generators before using.generator-refactoring 2013-09-20, by Sascha L. Teichmann
- Allow comma separated names in "names" attribute in out generators to allow registering for more than one name. Old "name" attribute is removed.generator-refactoring 2013-09-20, by Sascha L. Teichmann
- Read out generator class info from "class" attribute instead of tags text body.generator-refactoring 2013-09-20, by Sascha L. Teichmann
- Use DiagramGenerator for longitudinal section.generator-refactoring 2013-09-20, by Andre Heinecke
- Add NPE guardgenerator-refactoring 2013-09-20, by Andre Heinecke
- Add InfoGenerator Hacks to be removed soon.generator-refactoring 2013-09-20, by Andre Heinecke
- Remove Axis Walker, unabstract Diagram generatorgenerator-refactoring 2013-09-20, by Andre Heinecke
- Add second doOut implementations to work with diagram generatorgenerator-refactoring 2013-09-20, by Andre Heinecke
- issue1494: Spawn Q facet only if Q data is there.2013-09-20, by Felix Wolfsteller
- Simplify code a bit.2013-09-19, by Felix Wolfsteller
- Doc, comment.2013-09-19, by Felix Wolfsteller
- Close branch longitudinal-symmetry. Diagram refactoring is now done in branch generator-refactoring.longitudinal-symmetry 2013-09-20, by Tom Gottfried
- Added 'include-zero' attribute to <axis> tag in diagram configuration.generator-refactoring 2013-09-20, by Sascha L. Teichmann
- Added domain axis title to diagram attributes.generator-refactoring 2013-09-20, by Sascha L. Teichmann
- Some more accessors and typo fixgenerator-refactoring 2013-09-20, by Andre Heinecke
- Remove AxisProcessor "glue" class and extend Processor interfacegenerator-refactoring 2013-09-20, by Andre Heinecke
- Fix indention / line lengthgenerator-refactoring 2013-09-20, by Andre Heinecke
- Add Default Processor implementation and make processors inherit it.generator-refactoring 2013-09-20, by Andre Heinecke
- Remove obsolete configuration of DGM-SRID.2013-09-19, by Tom Gottfried
- DGM SRIds are now fetched from database instead of configuration.2013-09-19, by Sascha L. Teichmann
- issue1436: Repair sedimentload epoch calculation,2013-09-19, by Felix Wolfsteller
- Corrected debug output.2013-09-19, by Felix Wolfsteller
- Call processors from configuration.generator-refactoring 2013-09-19, by Sascha L. Teichmann
- Parse config when setup a new diagram.generator-refactoring 2013-09-19, by Sascha L. Teichmann
- Add annotationProcessorgenerator-refactoring 2013-09-19, by Andre Heinecke
- Added alignment rules for diagrams.generator-refactoring 2013-09-19, by Sascha L. Teichmann
- Simple interpolation logic for diagram titles and subtitles.generator-refactoring 2013-09-19, by Sascha L. Teichmann
- issue1493: Use other numberformat for csv data from diagram.2013-09-19, by Felix Wolfsteller
- issue971: Bring a formatter in (a bad) place.2013-09-18, by Felix Wolfsteller
- issue971: Use ";" as CSV separator also in ChartExportHelper, with the2013-09-18, by Felix Wolfsteller
- Add DiagramGenerator which should mainly replace xygeneratorgenerator-refactoring 2013-09-18, by Andre Heinecke
- Factor out annotation handling codegenerator-refactoring 2013-09-18, by Andre Heinecke
- Fixed typo.generator-refactoring 2013-09-18, by Sascha L. Teichmann
- Correct group for jfreechartgenerator-refactoring 2013-09-18, by Andre Heinecke
- Added first version of diagram attribute parser.generator-refactoring 2013-09-18, by Sascha L. Teichmann
- Update jfreechart dependency to 1.0.15generator-refactoring 2013-09-18, by Andre Heinecke
- Use combine instead of combineignoringNaN (for compatibility)generator-refactoring 2013-09-18, by Andre Heinecke
- Add setup(Element config) method to Generator interface to be initialized from configuration.generator-refactoring 2013-09-18, by Sascha L. Teichmann
- issue971: Change CSV column separator to ";".2013-09-18, by Felix Wolfsteller
- issue971: Change CSV column separator to ";" for Exports, client-side change follows.2013-09-18, by Felix Wolfsteller
- Combine AxisDataset implementations and remove / simplify handling code.generator-refactoring 2013-09-18, by Andre Heinecke
- Add a copy of the ChartGenerator class.generator-refactoring 2013-09-17, by Andre Heinecke
- (issue1023) We do not support html getfeatureinfo2013-09-17, by Andre Heinecke
- Doc.2013-09-17, by Felix Wolfsteller
- WDifferencesState: Remove empty constructor.2013-09-17, by Felix Wolfsteller
- issue1470: Make validate of WDifferencesState return true if in "new chart".2013-09-17, by Felix Wolfsteller
- Doc.2013-09-16, by Felix Wolfsteller
- Doc.2013-09-16, by Felix Wolfsteller
- Cosmetics, typo fix in comment.2013-09-16, by Felix Wolfsteller
- Cosmetics.2013-09-16, by Felix Wolfsteller
- Added tag 3.0.15 for changeset a18a437647932013-09-16, by Andre Heinecke
