log flys-artifacts/ChangeLog @ 1685:022f62c75878

age author description
Fri, 07 Oct 2011 13:14:37 +0000 Felix Wolfsteller Cosmetics.
Fri, 07 Oct 2011 10:51:09 +0000 Ingo Weinzierl Bugfix: #353 Enabled chart's to be drawn with proper axes set even if no data is contained.
Fri, 07 Oct 2011 09:40:15 +0000 Ingo Weinzierl Changed max number of digits for AT exports.
Thu, 06 Oct 2011 14:36:05 +0000 Sascha L. Teichmann ATWriter: Get rid of buggy first line code.
Wed, 05 Oct 2011 16:58:38 +0000 Sascha L. Teichmann fixed flys/issue201
Wed, 05 Oct 2011 15:04:00 +0000 Sascha L. Teichmann fixed flys/issue177
Wed, 05 Oct 2011 14:23:53 +0000 Ingo Weinzierl Improved the creation/rendering of annotations (km favorites, mainvalues).
Wed, 05 Oct 2011 13:16:44 +0000 Sascha L. Teichmann Removed code duplication of guessWaterIncreasing()
Wed, 05 Oct 2011 11:23:18 +0000 Ingo Weinzierl Bugfixes for various issues: Improved rendering process of annotations.
Wed, 05 Oct 2011 10:36:40 +0000 Sascha L. Teichmann Backjump correction: Finally looks fine.
Wed, 05 Oct 2011 10:26:54 +0000 Ingo Weinzierl AnnotationArtifact: Bugfixes and enabled cache support.
Tue, 04 Oct 2011 16:36:19 +0000 Sascha L. Teichmann flys/issue31: Simplified the back jump correction code a lot.
Tue, 04 Oct 2011 15:30:09 +0000 Ingo Weinzierl Modified code to determine the elevation model of Wsts in the LongitudinalSectionGenerator.
Tue, 04 Oct 2011 15:29:39 +0000 Sascha L. Teichmann Moved some generic double array code from BackjumpCorrector to DoubleUtil
Tue, 04 Oct 2011 15:23:31 +0000 Sascha L. Teichmann Added code to interpolate double values in a sorted array
Tue, 04 Oct 2011 15:14:09 +0000 Sascha L. Teichmann Removed superfluous imports.
Tue, 04 Oct 2011 13:38:21 +0000 Ingo Weinzierl Bugfix: #330 Add problem if no data was found for duration curves.
Tue, 04 Oct 2011 11:28:37 +0000 Ingo Weinzierl Added facet and index information to theme which are stored at CollectionItems.
Tue, 04 Oct 2011 07:37:05 +0000 Ingo Weinzierl Bugfix: #346 Modified x and y axis titles of longitudinal section charts.
Fri, 30 Sep 2011 14:29:26 +0000 Ingo Weinzierl Bugfix: #351 Modified determination of single values specified by min/max values and an interval.
Fri, 30 Sep 2011 09:41:22 +0000 Felix Wolfsteller Fix flys/issue334 (CrossSection output shown even without calculation result).
Fri, 30 Sep 2011 08:02:21 +0000 Ingo Weinzierl Bugfix: #176 and #349 Create proper titles for W and Q waterlevel facets.
Fri, 30 Sep 2011 05:31:34 +0000 Felix Wolfsteller Show proper labels for selected differences.
Thu, 29 Sep 2011 18:19:45 +0000 Sascha L. Teichmann Fixed issues flys/issue244, flys/issue332
Wed, 28 Sep 2011 15:47:57 +0000 Felix Wolfsteller Use StringUtil.wWrap , fix wrong loop, minor refac and cosmetics.
Wed, 28 Sep 2011 15:37:59 +0000 Felix Wolfsteller Extracted/use StringUtil.wWrap .
Wed, 28 Sep 2011 15:17:44 +0000 Ingo Weinzierl Write gauge determined in MainValuesService to log.
Wed, 28 Sep 2011 15:02:33 +0000 Ingo Weinzierl Bugfix: #332 Made AT-exports compatible with desktop FLYS.
Wed, 28 Sep 2011 14:01:00 +0000 Ingo Weinzierl Bugfix: #328 Improved datacage configuration and labels for selected waterlevels.
Wed, 28 Sep 2011 09:17:20 +0000 Ingo Weinzierl Made feed() operation able to remove existing data items from Artifact's data pool.
Wed, 28 Sep 2011 08:20:29 +0000 Felix Wolfsteller Extracted StringUtil.unbracket from WaterlevelSelectState.strip .
Tue, 27 Sep 2011 15:19:59 +0000 Ingo Weinzierl Little modifications for making recommendations - will now work for states with background calculation.
Tue, 27 Sep 2011 14:37:18 +0000 Felix Wolfsteller Enable auto-scaling axis for waterlevels in WDifference-plots.
Tue, 27 Sep 2011 14:03:06 +0000 Felix Wolfsteller In W-Difference-calculation, respect indices of selected facets.
Tue, 27 Sep 2011 13:45:13 +0000 Sascha L. Teichmann flys/issue317: Removed dependency from cross section demo app.
Tue, 27 Sep 2011 12:40:42 +0000 Ingo Weinzierl Improved Facet creation for floodmaps - WSPLGEN and barriers Facets are only created if the calculation was successful.
Tue, 27 Sep 2011 11:33:45 +0000 Ingo Weinzierl Improved WSPLGEN start to suppress inconsistent Artifact states.
Tue, 27 Sep 2011 10:53:41 +0000 Ingo Weinzierl Improved regex used to track WSPLGEN errors - will now match critical errors as well.
Tue, 27 Sep 2011 10:18:06 +0000 Sascha L. Teichmann Fixed whitespace usage in ChangeLog.
Tue, 27 Sep 2011 10:15:27 +0000 Sascha L. Teichmann Removed superfluous imports
Tue, 27 Sep 2011 10:06:19 +0000 Ingo Weinzierl Bugfix: #68 Set number format of chart plot axes based on the CallMeta instance for each request.
Tue, 27 Sep 2011 10:00:29 +0000 Sascha L. Teichmann Cache: Increased number of cached annotations.
Tue, 27 Sep 2011 09:35:18 +0000 Felix Wolfsteller Let WDifferences-diagram show more than one difference, if asked to.
Tue, 27 Sep 2011 07:41:21 +0000 Ingo Weinzierl Bugfix: #320 Substitue '../' in shapefile directories.
Mon, 26 Sep 2011 15:35:46 +0000 Ingo Weinzierl The extent of the WSPLGEN facets are now determined by the extent of the start and end CrossSectionTrack of the WSPLGEN calculation.
Mon, 26 Sep 2011 13:37:30 +0000 Felix Wolfsteller Improved w-differences diagram generation with included 'absolute' values.
Mon, 26 Sep 2011 13:17:55 +0000 Felix Wolfsteller Add positional-conflict-awareness when merging Facets in attribute
Mon, 26 Sep 2011 13:10:40 +0000 Ingo Weinzierl Bugfix: #296 Set i18n titles for WSPLGEN and barriers WMS layers.
Mon, 26 Sep 2011 13:10:17 +0000 Felix Wolfsteller Fix getPosition() in ManagedDomFacet.
Fri, 23 Sep 2011 11:58:08 +0000 Felix Wolfsteller Squash a bug about wrongly named position attribute ('pos' vs 'art:pos').
Fri, 23 Sep 2011 07:19:41 +0000 Felix Wolfsteller Minor refactoring, documentation.
Fri, 23 Sep 2011 04:21:16 +0000 Felix Wolfsteller Added documentation.
Thu, 22 Sep 2011 16:16:55 +0000 Ingo Weinzierl Made MetaDataService a subclass of FLYSService.
Thu, 22 Sep 2011 12:49:18 +0000 Bjoern Schilberg Full blown mosel wms mapfile.
Thu, 22 Sep 2011 10:07:22 +0000 Ingo Weinzierl Improved database session handling in services and artifacts.
Thu, 22 Sep 2011 07:58:24 +0000 Ingo Weinzierl Improved bounds validation for distance only states.
Wed, 21 Sep 2011 14:28:39 +0000 Felix Wolfsteller Added WaterlevelArtifact and respective infrastructure.
Wed, 21 Sep 2011 14:01:14 +0000 Felix Wolfsteller Cosmetics, docs.
Wed, 21 Sep 2011 13:53:09 +0000 Felix Wolfsteller Let WDifferencesCurveGenerator process LONGITUDINAL_W facets.
Wed, 21 Sep 2011 13:49:50 +0000 Felix Wolfsteller Preparations for ability to display multiple differences in one plot.
Wed, 21 Sep 2011 13:03:54 +0000 Ingo Weinzierl #315 Added new state for entering a kilometer range without step width.
Wed, 21 Sep 2011 13:01:25 +0000 Felix Wolfsteller Cosmetics.
Wed, 21 Sep 2011 12:55:36 +0000 Felix Wolfsteller Guard access to dataset to avoid NullPointerException.
Wed, 21 Sep 2011 10:08:47 +0000 Ingo Weinzierl #325 Create human readable label for the selected DEM (used in the static UI part).
Mon, 19 Sep 2011 18:46:44 +0000 Ingo Weinzierl Tagged RELEASE 2.5 of flys-artifacts.
Mon, 19 Sep 2011 14:36:51 +0000 Bjoern Schilberg Adjust wms saar styling in the flys karten-archive styling.
Mon, 19 Sep 2011 12:44:51 +0000 Ingo Weinzierl Cleanup imports.
Fri, 16 Sep 2011 14:57:14 +0000 Ingo Weinzierl Use DGM Id in FLYSArtifact's data pool to query DGMs for floodmaps instead of querying DGMs by given range values.
Fri, 16 Sep 2011 13:26:08 +0000 Ingo Weinzierl Added a DEM section to the floodmap section in the datacage configuration.
Fri, 16 Sep 2011 11:37:43 +0000 Felix Wolfsteller Fix build.
Fri, 16 Sep 2011 11:30:50 +0000 Felix Wolfsteller Load given artifacts for w-diff calculation.
Fri, 16 Sep 2011 10:49:04 +0000 Bjoern Schilberg Added inital mapserver configuration files.
Fri, 16 Sep 2011 09:51:02 +0000 Ingo Weinzierl Repaired datacage configuration. The system specific stuff is also displayed if a user-id is given.
Fri, 16 Sep 2011 08:47:09 +0000 Ingo Weinzierl Write the name of the selected waterlevels (used for the floodmap) into the static DESCRIBE.
Fri, 16 Sep 2011 06:52:16 +0000 Ingo Weinzierl Added state label for waterlevel selection.
Thu, 15 Sep 2011 15:36:05 +0000 Ingo Weinzierl Enabled the FloodMapState to fetch waterlevel data from external Artifact.
Thu, 15 Sep 2011 15:10:04 +0000 Ingo Weinzierl Removed needness import from JSON library which is not part of FLYS yet.
Thu, 15 Sep 2011 15:05:24 +0000 Ingo Weinzierl Introduced the possibility for States to transform/modify input before the data is added to FLYSArtifact.
Thu, 15 Sep 2011 15:00:23 +0000 Ingo Weinzierl Prepared FLYSArtifactCollection to live without Artifacts.
Thu, 15 Sep 2011 14:58:36 +0000 Ingo Weinzierl Improved FLYSUtils: fetch Artifacts from ArtifactDatabase properly.
Thu, 15 Sep 2011 07:39:36 +0000 Felix Wolfsteller Extended WDifferences bracnh of WINFO to have calculation in dedicated,
Wed, 14 Sep 2011 14:58:06 +0000 Ingo Weinzierl Prepared the winfo artifact for floodmap calculations (now selectable in the UI).
Wed, 14 Sep 2011 10:04:19 +0000 Ingo Weinzierl Bugfix: merge facets for the Collection's attribute only if the new and old facet's name and owner artifact are equal.
Wed, 14 Sep 2011 09:36:28 +0000 Felix Wolfsteller Partial fix flys/issue304 (3:Display ZeroBaseline).
Wed, 14 Sep 2011 07:46:40 +0000 Felix Wolfsteller Fix flys/issue310 (crosssection theme).
Tue, 13 Sep 2011 07:47:56 +0000 Ingo Weinzierl Add an error message to the calculation report if an error occured while WSPLGENJob creation.
Tue, 13 Sep 2011 06:30:10 +0000 Felix Wolfsteller Fix crash when StickyAxisAnnotation should be drawn without proper axis
Tue, 13 Sep 2011 05:25:09 +0000 Ingo Weinzierl Improved styling (mapserver style) of WSPLGEN result shape.
Mon, 12 Sep 2011 13:03:27 +0000 Ingo Weinzierl Add status message for queued WSPLGEN jobs to notify users.
Mon, 12 Sep 2011 11:40:04 +0000 Ingo Weinzierl Do only create WSPLGEN and barrier facets if the WSPLGEN job has been added to the Scheduler and if there are digitized geometries existing.
Mon, 12 Sep 2011 11:30:19 +0000 Felix Wolfsteller Fix build, added new DataUtil.
Mon, 12 Sep 2011 11:26:32 +0000 Felix Wolfsteller Cosmetics.
Mon, 12 Sep 2011 09:06:05 +0000 Felix Wolfsteller Added CSV Exporter for WDifferences.
Mon, 12 Sep 2011 09:00:08 +0000 Felix Wolfsteller Cosmetics
Mon, 12 Sep 2011 06:23:48 +0000 Ingo Weinzierl Suppress the GeoJSON string for the FloodMap creation to be included in the static DESCRIBE part.
Mon, 12 Sep 2011 04:20:48 +0000 Ingo Weinzierl Removed needless imports.
Fri, 09 Sep 2011 15:03:00 +0000 Ingo Weinzierl Write status messages and progress information of WSPLGEN Calculations into Artifact's DESCRIBE document.
Fri, 09 Sep 2011 13:26:28 +0000 Felix Wolfsteller Fix flys/issue280 (boundingboxes of annotation).
Fri, 09 Sep 2011 13:02:23 +0000 Felix Wolfsteller Fix flys/issue279 .
Fri, 09 Sep 2011 12:37:52 +0000 Felix Wolfsteller Fix ArrayIndexOutOfBounds in certain cases.
Fri, 09 Sep 2011 12:29:28 +0000 Felix Wolfsteller Fix facet name and legend of w-differences, walk over distance state, too.
Fri, 09 Sep 2011 10:13:22 +0000 Felix Wolfsteller Added configuration to kick-in w-differences branch of winfo.
Fri, 09 Sep 2011 10:07:14 +0000 Felix Wolfsteller Added very stubby WDifferences State/OutGenerator for WINFOArtifact.
Fri, 09 Sep 2011 10:01:09 +0000 Felix Wolfsteller Implement getArtifact(uuid,context) in FLYSUtils.
Thu, 08 Sep 2011 14:42:36 +0000 Ingo Weinzierl Added an Output target for WSPLGEN reports that will be available when an WSPLGEN calculation is finished.
Thu, 08 Sep 2011 11:29:04 +0000 Felix Wolfsteller Cosmetics.
Thu, 08 Sep 2011 11:24:27 +0000 Ingo Weinzierl Added a 'ProblemObserver' that analyses WSPLGEN's error stream for errors and warnings.
Thu, 08 Sep 2011 11:22:35 +0000 Felix Wolfsteller Added translation of w_differences.
Wed, 07 Sep 2011 13:56:10 +0000 Ingo Weinzierl Append an attribute 'background-processing' (can be 'true' or 'false') to the WINFOArtifact's DESCRIBE document.
Wed, 07 Sep 2011 13:54:18 +0000 Ingo Weinzierl Set the river extent for WMSLayers in the FloodMapState.
Wed, 07 Sep 2011 11:50:10 +0000 Felix Wolfsteller Added Themes for CrossSection diagrams.
Wed, 07 Sep 2011 10:51:54 +0000 Felix Wolfsteller Display real km of shown data in crosssection-diagram.
Wed, 07 Sep 2011 10:37:14 +0000 Felix Wolfsteller Fix various issues like i18n in cross section diagrams.
Wed, 07 Sep 2011 09:24:32 +0000 Felix Wolfsteller Fix waterline in crosssection diagram.
Wed, 07 Sep 2011 07:48:03 +0000 Felix Wolfsteller Fix profile loading of cross section diagram.
Wed, 07 Sep 2011 07:37:22 +0000 Felix Wolfsteller Minor cosmetics
Wed, 07 Sep 2011 07:28:52 +0000 Felix Wolfsteller Cosmetics, docs.
Tue, 06 Sep 2011 17:41:07 +0000 Ingo Weinzierl Added a fallback mechanism to style mapserver layers as long as the theme mechanism is not implemented for maps (as it is for charts).
Tue, 06 Sep 2011 15:25:54 +0000 Ingo Weinzierl Read barrier layers from filesystem while mapfile creation and build a facet for this layer in the artifact.
Tue, 06 Sep 2011 11:10:13 +0000 Raimund Renkert Added driver to database configuration for use with postgresql.
Tue, 06 Sep 2011 10:34:49 +0000 Ingo Weinzierl Little mapfile template improvement.
Mon, 05 Sep 2011 16:08:19 +0000 Ingo Weinzierl Create WMSLayerFacets for the WSPLGEN results after we have started a WSPLGEN job.
Mon, 05 Sep 2011 15:29:11 +0000 Ingo Weinzierl Trigger the mapfile creation after WSPLGEN jobs have finished.
Mon, 05 Sep 2011 14:04:03 +0000 Ingo Weinzierl Introduced a MapfileGenerator that creates Mapserver specific mapfiles based on WSPLGEN results read from filesystem.
Mon, 05 Sep 2011 07:17:52 +0000 Ingo Weinzierl Some bugfixes when starting/finishing WSPLGEN jobs.
Fri, 02 Sep 2011 13:12:05 +0000 Ingo Weinzierl Added infrastructure to start WSPLGEN calculations - the FloodMapState already start such calculations.
Fri, 02 Sep 2011 12:57:08 +0000 Felix Wolfsteller Add CrossSectionInfoGenerator.
Thu, 01 Sep 2011 13:00:36 +0000 Felix Wolfsteller Cleanups of CrossSection*.
Thu, 01 Sep 2011 12:47:01 +0000 Ingo Weinzierl Set the 'typ' attribute of lines and polygons in barrier shapefiles while shapefile creation.
Thu, 01 Sep 2011 12:23:23 +0000 Ingo Weinzierl Set the Z values of line and polygon barrier geometries used for WSPLGEN.
Thu, 01 Sep 2011 12:15:46 +0000 Felix Wolfsteller Get real (but yet not parameterized) data to display in CrossSection.
Thu, 01 Sep 2011 07:27:44 +0000 Ingo Weinzierl Close open shapefile transactions properly.
Thu, 01 Sep 2011 07:06:14 +0000 Ingo Weinzierl Renamed WSPLGEN required waterlevels file to 'waterlevel.wst'.
Thu, 01 Sep 2011 07:04:01 +0000 Ingo Weinzierl Write additional attributes ELEVATION and KILOMETER into crosssection track shapefiles.
Wed, 31 Aug 2011 13:19:29 +0000 Ingo Weinzierl Write WSP file for WSPLGEN and add its filepath to the WSPLGEN job.
Wed, 31 Aug 2011 12:44:07 +0000 Ingo Weinzierl Reordered some parameters in a FLYSArtifact method.
Wed, 31 Aug 2011 12:23:05 +0000 Felix Wolfsteller Improved stub for CrossSections (including Factory and Facet).
Wed, 31 Aug 2011 12:20:23 +0000 Felix Wolfsteller Cosmetics.
Wed, 31 Aug 2011 10:43:21 +0000 Felix Wolfsteller Removed stray character.
Wed, 31 Aug 2011 10:41:16 +0000 Felix Wolfsteller Cosmetics.
Wed, 31 Aug 2011 10:34:45 +0000 Felix Wolfsteller Fix translations of Main Values Facets.
Wed, 31 Aug 2011 10:24:49 +0000 Felix Wolfsteller Added dummy sceleton for Cross Sections.
Wed, 31 Aug 2011 08:53:30 +0000 Ingo Weinzierl Export floodplain to shapefile and add its file path to WSPLGEN job.
Wed, 31 Aug 2011 07:50:01 +0000 Ingo Weinzierl Write file path of DMGs into the WSPLGEN job while preparing WSPLGEN.
Tue, 30 Aug 2011 15:17:43 +0000 Ingo Weinzierl Export riveraxis and crosssections to shapefiles for WSPLGEN.
Tue, 30 Aug 2011 14:13:06 +0000 Ingo Weinzierl Use the correct SRID while reading GeoJSON barriers and writing line/polygon shapefiles.
Tue, 30 Aug 2011 11:09:54 +0000 Ingo Weinzierl Write user defined barriers into a shapefile that is placed in the Artifact's directory.
Tue, 30 Aug 2011 08:09:52 +0000 Ingo Weinzierl Moved code to extract the river srid defined in the global configuration into FLYSUtils.
Mon, 29 Aug 2011 09:26:56 +0000 Felix Wolfsteller Use FLYSUtils.getRiver instead of WINFOArtifact.getRiver.
Mon, 29 Aug 2011 09:26:07 +0000 Felix Wolfsteller Use FLYSUtils.getRiver instead of WINFOArtifact.getRiver.
Mon, 29 Aug 2011 09:11:15 +0000 Felix Wolfsteller Commit accidentally omitted result of refactoring (WINFO/FLYSUtils/getRiver).
Mon, 29 Aug 2011 09:07:55 +0000 Felix Wolfsteller Interpolate Q main values, generate interpolated W main values on the fly from
Mon, 29 Aug 2011 09:04:48 +0000 Felix Wolfsteller Use new helper class FLYSUtils, minor refactorization.
Mon, 29 Aug 2011 09:01:40 +0000 Felix Wolfsteller Refactored to use new FLYSUtils, moved getRiver-functionality inside.
Mon, 29 Aug 2011 08:58:03 +0000 Felix Wolfsteller Minor cosmetics.
Fri, 26 Aug 2011 15:32:58 +0000 Sascha L. Teichmann Made it Oracle compatible
Fri, 26 Aug 2011 15:01:20 +0000 Ingo Weinzierl Set some WSPLGENJob parameters which are stored in FLYSArtifact in the Floodmap state.
Fri, 26 Aug 2011 14:58:35 +0000 Ingo Weinzierl Refactored the code to fetch the km range/locations into a utility class.
Fri, 26 Aug 2011 14:55:18 +0000 Ingo Weinzierl Added a new method to FLYSArtifact to destroy a single state (call its endOfLife).
Fri, 26 Aug 2011 12:45:32 +0000 Felix Wolfsteller Cosmetics.
Fri, 26 Aug 2011 12:44:12 +0000 Felix Wolfsteller Added limited themeing-support for MainValues.
Fri, 26 Aug 2011 12:42:12 +0000 Ingo Weinzierl Prepare directories for WSPLGEN specific data in FloodMap state and remove those directories when State.endOfLife() is called.
Fri, 26 Aug 2011 12:40:11 +0000 Felix Wolfsteller New theme-related utilities.
Fri, 26 Aug 2011 11:15:24 +0000 Felix Wolfsteller Improved mainvalues rendering.
Fri, 26 Aug 2011 11:11:46 +0000 Felix Wolfsteller Recommend MainValues for Computed discharge curves.
Fri, 26 Aug 2011 11:10:31 +0000 Felix Wolfsteller New NamedDouble class which implements a <String,double>-pair.
Fri, 26 Aug 2011 08:53:37 +0000 Ingo Weinzierl Call State.endOfLife() for all States in the Artifact when Artifact.endOfLife() is called.
Fri, 26 Aug 2011 08:49:18 +0000 Felix Wolfsteller Plot "real" (respecting parameters) W and Q MainValues, yet in wrong scale.
Fri, 26 Aug 2011 08:07:47 +0000 Ingo Weinzierl Call State.endOfLife() in FLYSArtifact when stepping back to a previous state.
Thu, 25 Aug 2011 10:53:25 +0000 Felix Wolfsteller Enable plotting of some annotations that look like MainValues.
Thu, 25 Aug 2011 10:50:30 +0000 Felix Wolfsteller Prepare StickyAxisAnnotation implementation to handle annotations at 'y' (vertical) axis.
Thu, 25 Aug 2011 10:47:55 +0000 Felix Wolfsteller Minor cosmetics.
Thu, 25 Aug 2011 10:45:12 +0000 Felix Wolfsteller Added MainValue-Fetching-Capabilities to MainValuesArtifact.
Thu, 25 Aug 2011 10:42:23 +0000 Felix Wolfsteller Improved implementation of MainValueArtifact#MainValueFacet .
Thu, 25 Aug 2011 10:38:45 +0000 Felix Wolfsteller Changed state spawning mechanism of MainValuesArtifact.
Thu, 25 Aug 2011 10:34:20 +0000 Felix Wolfsteller Minor cosmetics and docs.
Thu, 25 Aug 2011 10:29:14 +0000 Felix Wolfsteller Added new Mainvalues FacetType.
Wed, 24 Aug 2011 14:35:38 +0000 Ingo Weinzierl Changed the way of collecting the data for the RiverAxisArtifact - use the database instead of a Master-Artifact.
Wed, 24 Aug 2011 14:30:27 +0000 Ingo Weinzierl Removed needless imports.
Wed, 24 Aug 2011 12:12:44 +0000 Felix Wolfsteller Added conf for factory and rule for MainValueArtifacts, missing ChangeLog entry.
Wed, 24 Aug 2011 11:40:09 +0000 Felix Wolfsteller Fix dates in ChangeLog.
Wed, 24 Aug 2011 11:38:30 +0000 Felix Wolfsteller Smaller Cosmetics.
Wed, 24 Aug 2011 10:53:01 +0000 Sascha L. Teichmann Datacage: Use 'ids' in user specific part, too.
Wed, 24 Aug 2011 10:32:46 +0000 Sascha L. Teichmann Datacage template: s/db-ids/ids/g
Wed, 24 Aug 2011 09:44:31 +0000 Felix Wolfsteller Refactored (state access) to ease future development of more trivial artifacts.
Wed, 24 Aug 2011 08:53:11 +0000 Ingo Weinzierl The WMS background's facet will now also have a SRID set.
Wed, 24 Aug 2011 08:42:31 +0000 Felix Wolfsteller Minor changes to stub MainValuesArtifact.
Wed, 24 Aug 2011 08:22:09 +0000 Ingo Weinzierl Moved the input of user defined barriers for the floodmap to an earlier state.
Wed, 24 Aug 2011 07:51:12 +0000 Ingo Weinzierl Repaired xpath expressions for wms srid and background layers that broke after the floodmap config structure changed.
Tue, 23 Aug 2011 15:32:33 +0000 Ingo Weinzierl Repaired broken river wms initialization.
Tue, 23 Aug 2011 13:17:21 +0000 Sascha L. Teichmann Made facets cloneable with the right type.
Tue, 23 Aug 2011 13:05:54 +0000 Ingo Weinzierl Set the master artifact while output creation.
Tue, 23 Aug 2011 11:07:21 +0000 Sascha L. Teichmann Made FLYS artifacts cloneable.
Tue, 23 Aug 2011 07:53:41 +0000 Ingo Weinzierl Implemented a MapInfo service that returns some basic information to create maps for specific rivers.
Mon, 22 Aug 2011 16:37:12 +0000 Sascha L. Teichmann Build out/facet filter from XML document passed at creation time.
Mon, 22 Aug 2011 16:05:40 +0000 Sascha L. Teichmann Added optional positive filter for outs and facets.
Mon, 22 Aug 2011 15:25:48 +0000 Sascha L. Teichmann Moved WINFO specific stuff from FLYS into WINFO artifact.
Mon, 22 Aug 2011 13:07:26 +0000 Sascha L. Teichmann Datacage: filter by out in user specific part
Mon, 22 Aug 2011 10:40:15 +0000 Ingo Weinzierl Prepared the FloodMapState to save geometries.
Fri, 19 Aug 2011 15:52:03 +0000 Ingo Weinzierl The boundary (extent) for the river axis is determined based on its geometry - this extent is written into the wms facet.
Fri, 19 Aug 2011 14:13:51 +0000 Sascha L. Teichmann Removed superfluous imports.
Fri, 19 Aug 2011 14:10:18 +0000 Sascha L. Teichmann State engine: Removed CallContext from state validation.
Fri, 19 Aug 2011 11:46:40 +0000 Felix Wolfsteller Added lacalization of "Streckenfavoriten".
Fri, 19 Aug 2011 11:28:50 +0000 Felix Wolfsteller Picky white-space cosmetics.
Fri, 19 Aug 2011 10:17:08 +0000 Felix Wolfsteller Added stub implementation of new MainValuesArtifact.
Fri, 19 Aug 2011 09:48:13 +0000 Sascha L. Teichmann Fixed flys/issue262: Unified user and system datacage template
Thu, 18 Aug 2011 14:58:17 +0000 Sascha L. Teichmann flys/issue260: Datacage uses master_artifacts view now.
Thu, 18 Aug 2011 14:19:30 +0000 Sascha L. Teichmann Datacage: Added view to schema to select master artifacts.
Thu, 18 Aug 2011 14:13:35 +0000 Sascha L. Teichmann Datacage user template: Removed state filter because it was broken. Simplified by joining two contexts.
Thu, 18 Aug 2011 14:09:54 +0000 Felix Wolfsteller Fix rendering of Annotations/lines under certain zooming conditions, ChangeLog.
Wed, 17 Aug 2011 13:05:15 +0000 Felix Wolfsteller Moved StickyAxisAnnotation into new package de.intevation.flys.jfree .
Wed, 17 Aug 2011 12:53:55 +0000 Felix Wolfsteller Extracted and renamed CustomAnnotation to StickyAxisAnnotation. Also removed
Wed, 17 Aug 2011 12:32:26 +0000 Felix Wolfsteller Improved CustomAnnotation rendering.
Wed, 17 Aug 2011 09:16:20 +0000 Felix Wolfsteller Added proof-of-concept collision detection for text annotations.
Tue, 16 Aug 2011 13:24:50 +0000 Felix Wolfsteller Started implementation of CustomAnnotation to plot collision-free annotations.
Tue, 16 Aug 2011 11:43:47 +0000 Felix Wolfsteller Slightly improved rendering of annotations in LongitudinalSection-plots.
Mon, 15 Aug 2011 10:56:58 +0000 Sascha L. Teichmann Fix for flys/issue191
Fri, 12 Aug 2011 12:54:19 +0000 Felix Wolfsteller Let AnnotationArtifact fetch "more correct" data.
Fri, 12 Aug 2011 12:39:44 +0000 Felix Wolfsteller Added functionality to query range and point-annotations only to
Thu, 11 Aug 2011 15:08:24 +0000 Sascha L. Teichmann Datacage: Added a development mode for recommendations
Thu, 11 Aug 2011 13:03:41 +0000 Felix Wolfsteller Picky Cosmetics.
Thu, 11 Aug 2011 12:48:31 +0000 Felix Wolfsteller Made (kind of dummy-) Annotations in LongitudinalSection diagrams visible.
Thu, 11 Aug 2011 12:43:00 +0000 Felix Wolfsteller Added configuration for AnnotationArtifacts.
Thu, 11 Aug 2011 12:24:31 +0000 Felix Wolfsteller Added initial version of AnnotationArtifact and friends.
Wed, 10 Aug 2011 14:57:12 +0000 Sascha L. Teichmann Datacage: Extended schema for artifacts and collections
Wed, 10 Aug 2011 10:08:01 +0000 Sascha L. Teichmann Datacage: Templates now can nest <dc:elements> into other elements in the body of <dc:context>
Wed, 10 Aug 2011 08:43:38 +0000 Sascha L. Teichmann Datacage: Fixed caching issue leading to incorrect results.
Tue, 09 Aug 2011 10:25:45 +0000 Sascha L. Teichmann Added <old_calculations> element
Tue, 09 Aug 2011 10:23:04 +0000 Sascha L. Teichmann Cosmetic: Replaced usage of legacy java.util.Stack with java.util.Deque.
Thu, 04 Aug 2011 15:32:10 +0000 Sascha L. Teichmann Datacage: use more compatible casts to UUIDs
Thu, 04 Aug 2011 15:05:02 +0000 Sascha L. Teichmann Datacage: added first user specific config for cross sections.
Thu, 04 Aug 2011 10:58:00 +0000 Sascha L. Teichmann Added a <dc:comment> tag to place comments in the meta data templates.
Thu, 04 Aug 2011 10:24:23 +0000 Sascha L. Teichmann Meta data service: Be a bit more tolerant about empty strings for UUIDs of artifact and user.
Wed, 03 Aug 2011 16:40:04 +0000 Sascha L. Teichmann Bring user specific meta data service to life.
Wed, 03 Aug 2011 11:23:13 +0000 Felix Wolfsteller Minor cosmetics (comments).
Wed, 03 Aug 2011 11:20:07 +0000 Felix Wolfsteller Minor cosmetics, (comments).
Wed, 03 Aug 2011 08:25:28 +0000 Sascha L. Teichmann Fixed potential NPE in collection monitor
Tue, 02 Aug 2011 22:16:16 +0000 Sascha L. Teichmann Added support for more than one db connection in datacage templating.
Tue, 02 Aug 2011 16:36:22 +0000 Sascha L. Teichmann Datacage: Forgot to fetch dialect dependent SQL statement for deleting artifacts by uuid.
Tue, 02 Aug 2011 14:09:01 +0000 Sascha L. Teichmann Datacage: Set the name of the collections at initial scan, too.
Tue, 02 Aug 2011 13:40:04 +0000 Sascha L. Teichmann Datacage: fixed wrong SQL references
Tue, 02 Aug 2011 13:03:06 +0000 Sascha L. Teichmann Datacage: Fixed two NPEs
Tue, 02 Aug 2011 11:38:20 +0000 Sascha L. Teichmann Forwarded kill collections and artifacts events to datacage.
Tue, 02 Aug 2011 11:20:18 +0000 Sascha L. Teichmann The signature of BackendListener in artifactdatabase has changed.
Mon, 01 Aug 2011 20:35:43 +0000 Sascha L. Teichmann Datacage: completed backend listener stuff.
Mon, 01 Aug 2011 16:53:54 +0000 Sascha L. Teichmann Datacage: Update collection names on change. Remove artifacts from collections.
Mon, 01 Aug 2011 16:34:48 +0000 Sascha L. Teichmann Datacage: Pass global context to datacage if calls come from backend listener.
Mon, 01 Aug 2011 15:58:37 +0000 Sascha L. Teichmann Fixed recursion bug.
Mon, 01 Aug 2011 15:41:10 +0000 Sascha L. Teichmann Added some debug output
Mon, 01 Aug 2011 14:58:15 +0000 Sascha L. Teichmann Wire datacage with backend of artifact database.
Mon, 01 Aug 2011 08:31:09 +0000 Sascha L. Teichmann Datacage: Moved templating in a better suited package.
Mon, 01 Aug 2011 08:11:12 +0000 Sascha L. Teichmann For doc purposes add section with db config in config.xml
Sun, 31 Jul 2011 19:47:41 +0000 Sascha L. Teichmann Datacage: delete artifacts at initial scan, too. Fixed problem with writing content of state data.
Sun, 31 Jul 2011 19:07:02 +0000 Sascha L. Teichmann Added kludge for the null type information of artifact data.
Sun, 31 Jul 2011 17:30:29 +0000 Sascha L. Teichmann Fixed default connection URL to use a namend in-mermory database.
Sun, 31 Jul 2011 16:49:48 +0000 Sascha L. Teichmann Fixed datacage db scheme. add some debug output.
Fri, 29 Jul 2011 13:29:29 +0000 Sascha L. Teichmann Datacage: Store
Fri, 29 Jul 2011 11:24:41 +0000 Sascha L. Teichmann Store outs of artifacts into datacage db at initial scan.
Fri, 29 Jul 2011 08:40:11 +0000 Sascha L. Teichmann Add artifacts data into datacage db at initial scan.
Fri, 29 Jul 2011 07:56:28 +0000 Sascha L. Teichmann Add artifacts into datacage db at initial scan.
Thu, 28 Jul 2011 15:59:38 +0000 Sascha L. Teichmann Datacage: Add collection items at initial scan.
Thu, 28 Jul 2011 15:34:26 +0000 Sascha L. Teichmann Datacage: Add collections at initial scan.
Thu, 28 Jul 2011 15:07:20 +0000 Sascha L. Teichmann Datacage: Add users at initial scan.
Thu, 28 Jul 2011 14:38:51 +0000 Sascha L. Teichmann Datacage SQL schema: Using sequences for id generation now
Thu, 28 Jul 2011 14:26:01 +0000 Sascha L. Teichmann Datacage: clear database before initial scan
Thu, 28 Jul 2011 13:32:27 +0000 Sascha L. Teichmann Ajusted datacage to use the SQL infrastructure from the artifact database.
Wed, 27 Jul 2011 14:04:03 +0000 Sascha L. Teichmann Added the datacage as lifetime listener to the artifact database to create the initial index.
Wed, 27 Jul 2011 11:01:55 +0000 Sascha L. Teichmann datacage: prepared access to outs of artifacts.
Wed, 27 Jul 2011 08:20:55 +0000 Sascha L. Teichmann Datacage: Added ON DELETE CASCADE constraints in schema.
Tue, 26 Jul 2011 14:14:55 +0000 Sascha L. Teichmann Added schema for datacage db
Tue, 26 Jul 2011 09:50:58 +0000 Sascha L. Teichmann Removed Hello-World-App
Mon, 25 Jul 2011 14:55:43 +0000 Sascha L. Teichmann Made meta data service thread safe.
Mon, 25 Jul 2011 14:12:14 +0000 Sascha L. Teichmann Improved XPath handling for absent flags.
Mon, 25 Jul 2011 12:56:53 +0000 Sascha L. Teichmann meta data service: Added 'if log.isDebugEnabled() {}'
Mon, 25 Jul 2011 11:05:33 +0000 Sascha L. Teichmann meta data service: made artifact optional and allow passing extra parameters.
Sat, 23 Jul 2011 18:47:08 +0000 Sascha L. Teichmann Reuse the compiled statements in meta data service.
Fri, 22 Jul 2011 16:55:36 +0000 Sascha L. Teichmann Added caching support for the static part of the datacage.
Fri, 22 Jul 2011 11:18:00 +0000 Ingo Weinzierl Prepared the FLYSArtifactCollection to support the storage of already loaded recommendations.
Fri, 22 Jul 2011 10:41:30 +0000 Sascha L. Teichmann meta data service: Adjusted to use the DataCage recommendations.
Fri, 22 Jul 2011 09:10:31 +0000 Sascha L. Teichmann Meta data template: Allow '-' in variable names.
Thu, 21 Jul 2011 15:13:07 +0000 Ingo Weinzierl Added missing river_id for the datacage factory node of the wmsbackground layer.
Thu, 21 Jul 2011 15:07:38 +0000 Ingo Weinzierl Added the river_id to the datacage nodes for riveraxis and wms background layer.
Thu, 21 Jul 2011 14:43:19 +0000 Sascha L. Teichmann Adjusted services to implement changed signature.
Thu, 21 Jul 2011 14:00:09 +0000 Ingo Weinzierl Modified the CollectionMonitor to recommend artifacts for the current state's outputs only.
Thu, 21 Jul 2011 10:45:52 +0000 Ingo Weinzierl Modified the CollectionMonitor (for recommended artifacts) to use the DataCage.
Wed, 20 Jul 2011 22:03:50 +0000 Sascha L. Teichmann Datacage: recommendation mechanism now accepts nodes to append results.
Wed, 20 Jul 2011 20:51:13 +0000 Sascha L. Teichmann Datacage template: Added a macro mechanism.
Wed, 20 Jul 2011 20:13:49 +0000 Sascha L. Teichmann Datacage template: Added a new 'if' construct similiar to XSLT
Wed, 20 Jul 2011 17:03:00 +0000 Sascha L. Teichmann DataCage: Added a recommend() method to generate recommendations for
Wed, 20 Jul 2011 16:28:49 +0000 Sascha L. Teichmann Datacage: Added custom provider for XPath functions.
Wed, 20 Jul 2011 15:06:16 +0000 Ingo Weinzierl Added configurations for river WMSe (currently for Saar, Mosel, Elbe).
Wed, 20 Jul 2011 14:59:25 +0000 Sascha L. Teichmann Meta data template: Added new choose/when/otherwise construct similiar to XSLT
Wed, 20 Jul 2011 14:01:38 +0000 Ingo Weinzierl Made the background layer in floodmaps configurable.
Wed, 20 Jul 2011 13:21:16 +0000 Ingo Weinzierl Removed the extent of the background layer facet.
Wed, 20 Jul 2011 12:42:06 +0000 Ingo Weinzierl Set the extent of created WMSLayerFacets.
Wed, 20 Jul 2011 12:37:54 +0000 Ingo Weinzierl WMSLayerFacets can have an extent now.
Wed, 20 Jul 2011 12:34:20 +0000 Ingo Weinzierl Adapted the method of FLYSArtifact.setup() which has been changed in the artifact package.
Wed, 20 Jul 2011 10:39:27 +0000 Sascha L. Teichmann Added standalone app to debug the datacage template.
Wed, 20 Jul 2011 09:56:39 +0000 Sascha L. Teichmann First step to factor out the "Datenkorb" logic into a service independent singleton.
Wed, 20 Jul 2011 07:08:10 +0000 Ingo Weinzierl Removed a duplicated property in ManagedFacets.
Tue, 19 Jul 2011 17:01:10 +0000 Sascha L. Teichmann Improved error handling in loading meta data template.
Tue, 19 Jul 2011 16:39:32 +0000 Sascha L. Teichmann Made meta data template configurable.
Tue, 19 Jul 2011 16:14:52 +0000 Sascha L. Teichmann Meta data: Make database ids identifiable with unique name "db-id"
Tue, 19 Jul 2011 10:37:57 +0000 Ingo Weinzierl Use the Facet.toXML() method to write facet elements into the DESCRIBE document of the Collection.
Mon, 18 Jul 2011 17:09:00 +0000 Ingo Weinzierl Simplified the code to read all provided Outputs of an Artifact.
Mon, 18 Jul 2011 15:07:47 +0000 Ingo Weinzierl The WMSLayerFacet now writes the WMS URL and layernames to its XML representation.
Mon, 18 Jul 2011 10:13:25 +0000 Ingo Weinzierl Added artifacts/states for WMS background an river axis and a configuration for the output-defaults.
Mon, 18 Jul 2011 09:20:42 +0000 Ingo Weinzierl Added a computeInit() method to intialize data/facets after creating new artifacts.
Thu, 14 Jul 2011 15:30:55 +0000 Ingo Weinzierl Append artifact recommendations to the artifact's describe document.
Thu, 14 Jul 2011 14:25:36 +0000 Ingo Weinzierl Adapted a method signature of FLYSContextFactory to apply the changes in the artifact database.
Thu, 14 Jul 2011 14:11:29 +0000 Sascha L. Teichmann Debugged the water fill algorithm.
Thu, 14 Jul 2011 11:27:01 +0000 Ingo Weinzierl Added a monitor that creates new artifacts for default themes in charts and maps.
Wed, 13 Jul 2011 17:33:15 +0000 Sascha L. Teichmann Add Swing standalone app to test/develope cross sections directly from database.
Wed, 13 Jul 2011 10:29:32 +0000 Ingo Weinzierl Introduced a new output 'floodmap' for the FloodMapState.
Tue, 12 Jul 2011 08:05:54 +0000 Sascha L. Teichmann Fixed corner case.
Mon, 11 Jul 2011 16:08:30 +0000 Sascha L. Teichmann Generate water level lines for given cross section.
Fri, 08 Jul 2011 08:26:18 +0000 Ingo Weinzierl Artifacts and Collections now support the 'type' member of Outputs.
Wed, 06 Jul 2011 13:41:36 +0000 Ingo Weinzierl Removed a type from transition model.
Wed, 06 Jul 2011 13:37:52 +0000 Ingo Weinzierl The DataFacets are now able to store the ID of the create which created them.
Wed, 06 Jul 2011 09:18:31 +0000 Ingo Weinzierl Facets created by the WaterlevelState store information about state's id and artifact's hash value now.
Tue, 05 Jul 2011 17:28:57 +0000 Ingo Weinzierl Changed the desired UI provider for the WaterlevelGroundDifferences state.
Tue, 05 Jul 2011 15:34:54 +0000 Ingo Weinzierl Enhanced the transition model to continue the parameterization in the waterlevel state to compute flood maps.
Mon, 04 Jul 2011 13:23:54 +0000 Sascha L. Teichmann Fix(?) for flys/issue114
Sun, 03 Jul 2011 15:33:33 +0000 Sascha L. Teichmann Added the math needed to calculate "W-Differenzen" in "Laengsschnitten"
Fri, 01 Jul 2011 14:46:13 +0000 Ingo Weinzierl An initial implementation to render chart series based on the XML configuration in themes.xml.
Fri, 01 Jul 2011 11:16:11 +0000 Ingo Weinzierl #135 Modified the way to store datasets for different chart axes.
Fri, 01 Jul 2011 08:33:52 +0000 Ingo Weinzierl Added the option to call the distance info service with a filter to fetch locations or distances only.
Thu, 30 Jun 2011 11:32:17 +0000 Ingo Weinzierl #159 Modifications in the transition model to support a state with a kilometer range input only.
Wed, 29 Jun 2011 09:00:31 +0000 Sascha L. Teichmann Downgraded Trove to 1.1-beta-5
Tue, 28 Jun 2011 15:21:02 +0000 Ingo Weinzierl Fixed the JBoss Maven repository.
Tue, 28 Jun 2011 09:56:52 +0000 Ingo Weinzierl Tagged RELEASE 2.4 of flys-artifacts.
Mon, 27 Jun 2011 16:07:24 +0000 Ingo Weinzierl The WST export contains the corrected W values now.
Mon, 27 Jun 2011 14:06:16 +0000 Sascha L. Teichmann WQ: Guessing increaing w is not based on direct neighbors any more.
Mon, 27 Jun 2011 13:58:03 +0000 Sascha L. Teichmann ATWriter: Fixed array size to construct spline with stricly increasing values.
Mon, 27 Jun 2011 09:42:21 +0000 Sascha L. Teichmann Fix for flys/issue150: Invert the x axis if its guessed that water is increasing.
Mon, 27 Jun 2011 09:17:41 +0000 Sascha L. Teichmann WQ: Added a method to guess is increasing.
Mon, 27 Jun 2011 07:45:32 +0000 Ingo Weinzierl #177 Commented out the code that generates the series names in discharge curves. This code currently generates memory problems and stops the server accepting new http requests.
Sun, 26 Jun 2011 17:18:59 +0000 Sascha L. Teichmann Removed trailing whitespace.
Sun, 26 Jun 2011 17:06:35 +0000 Sascha L. Teichmann Removed dead code.
Sun, 26 Jun 2011 16:40:35 +0000 Sascha L. Teichmann Forgot to check in last ChangeLog change.
Sun, 26 Jun 2011 16:19:02 +0000 Sascha L. Teichmann Fix for flys/issue173
Sun, 26 Jun 2011 14:46:48 +0000 Sascha L. Teichmann Fix for flys/issue147
Sun, 26 Jun 2011 13:07:44 +0000 Sascha L. Teichmann Fix for flys/issue86
Sat, 25 Jun 2011 17:35:50 +0000 Sascha L. Teichmann Fixed "W am Pegel" calculations.
Fri, 24 Jun 2011 12:05:13 +0000 Ingo Weinzierl #174 Longitudinal section charts will now have an upper margin again.
Fri, 24 Jun 2011 09:49:27 +0000 Ingo Weinzierl #172 Charts of type duration curve will now have a lower X set to '0'.
Thu, 23 Jun 2011 21:44:24 +0000 Sascha L. Teichmann ATWriter: Results are now in cm. Made it more robust against corner cases.
Thu, 23 Jun 2011 17:22:17 +0000 Sascha L. Teichmann Added generation and configuration of AT facets.
Thu, 23 Jun 2011 16:45:48 +0000 Sascha L. Teichmann Added exporter for AT facets.
Thu, 23 Jun 2011 15:50:44 +0000 Sascha L. Teichmann New AT writer for results.
Thu, 23 Jun 2011 13:42:47 +0000 Ingo Weinzierl #157 Both types of discharge curves will now include the '0' value on the x-axis.
Thu, 23 Jun 2011 12:39:59 +0000 Sascha L. Teichmann WQDay is based on WQ now to make it exportable as AT.
Thu, 23 Jun 2011 12:19:12 +0000 Sascha L. Teichmann Added base class WQ for WQKms.
Thu, 23 Jun 2011 08:58:30 +0000 Sascha L. Teichmann Corrected configuration for error reports.
Wed, 22 Jun 2011 14:47:22 +0000 Ingo Weinzierl #164 Create the items for the adapted WQ state with range information for W and Q.
Wed, 22 Jun 2011 10:54:30 +0000 Sascha L. Teichmann "Abflusskurve am Pegel" looks correct again.
Wed, 22 Jun 2011 10:36:27 +0000 Sascha L. Teichmann Improved situtation on rendering "Abflusskurve am Pegel". Not fully working, yet.
Wed, 22 Jun 2011 09:19:16 +0000 Sascha L. Teichmann Generate facets for "Abflusskurven am Pegel". Not working by now. :-/
Wed, 22 Jun 2011 06:51:36 +0000 Ingo Weinzierl #161 Include the 0 on the second y axis (the Q axis) in longitudinal section charts intially.
Tue, 21 Jun 2011 21:41:49 +0000 Sascha L. Teichmann Draw correction curve again.
Tue, 21 Jun 2011 18:10:49 +0000 Ingo Weinzierl #157 Computed discharge curve charts always have a lower bound set to 0.
Tue, 21 Jun 2011 17:39:29 +0000 Ingo Weinzierl #90 Added a margin between chart data and chart axes to avoid displaying curves on the chart border.
Tue, 21 Jun 2011 17:03:46 +0000 Sascha L. Teichmann Fix for flys/issue158
Tue, 21 Jun 2011 16:31:19 +0000 Sascha L. Teichmann Fix for flys/issue154
Tue, 21 Jun 2011 16:22:28 +0000 Sascha L. Teichmann Only generate 'outs' if they have facets.
Tue, 21 Jun 2011 14:33:00 +0000 Ingo Weinzierl Put the time-to-live of the collection into its DESCRIBE document.
Mon, 20 Jun 2011 14:36:42 +0000 Sascha L. Teichmann Configured states to generate report facets.
Mon, 20 Jun 2011 14:14:20 +0000 Sascha L. Teichmann Generate report facets if there are problems with the calculations.
Mon, 20 Jun 2011 13:47:59 +0000 Sascha L. Teichmann Added generator and facet for error reports.
Mon, 20 Jun 2011 12:32:32 +0000 Sascha L. Teichmann New model to transport data and error reports of calculations.
Sat, 18 Jun 2011 20:20:34 +0000 Sascha L. Teichmann Added calculation "am Pegel" version to the "Wasserspiegellage" calculation.
Sat, 18 Jun 2011 18:19:34 +0000 Sascha L. Teichmann Removed dead code.
Sat, 18 Jun 2011 17:03:17 +0000 Sascha L. Teichmann Only generate facets when needed.
Fri, 17 Jun 2011 16:17:03 +0000 Sascha L. Teichmann Merged revisions 2127-2133,2136-2137,2140,2143-2144,2146,2150-2151,2153-2154 via svnmerge from
Fri, 17 Jun 2011 13:00:54 +0000 Ingo Weinzierl Added a parameter 'wq_free' that determines that mode of calculation 1 (specifies if the calculation is bound to a gauge or not).
Fri, 17 Jun 2011 12:38:41 +0000 Ingo Weinzierl DischargeLongitudinalSectionCurve will have corrected W facets now.
Wed, 15 Jun 2011 15:28:54 +0000 Ingo Weinzierl Merged with trunk and introduced hashing of computed values. facets-slt
Tue, 14 Jun 2011 16:26:59 +0000 Sascha L. Teichmann DistanceInfoService: Got rid of namespace in result document.
Tue, 14 Jun 2011 15:34:27 +0000 Ingo Weinzierl #77 The curves in a duration chart will have names now.
Tue, 14 Jun 2011 13:54:19 +0000 Ingo Weinzierl The min/max W/Q ranges in the panel for calculation4 are written into the DESCRIBE.
Tue, 14 Jun 2011 13:53:25 +0000 Sascha L. Teichmann Write top 'Oberkante' and bottom 'Unterkante' to out going XML if they exist.
Tue, 14 Jun 2011 10:38:00 +0000 Ingo Weinzierl The state that is used to enter locations writes the river's range into the DESCRIBE now.
Fri, 10 Jun 2011 15:59:47 +0000 Sascha L. Teichmann Added error reporting to 'Wasserspiegellage' calculation.
Fri, 10 Jun 2011 14:24:15 +0000 Sascha L. Teichmann Added error reporting to 'Abflusskurve' calculation.
Fri, 10 Jun 2011 12:38:08 +0000 Sascha L. Teichmann Added error reporting to 'Dauerzahlen' calculation.
Fri, 10 Jun 2011 10:10:04 +0000 Sascha L. Teichmann Added methods to remove NaN values.
Fri, 10 Jun 2011 09:19:27 +0000 Sascha L. Teichmann Added calculation base class to collect the problems during the calculations. Adjusted calculation 4 to use the mechanism.
Thu, 09 Jun 2011 10:48:13 +0000 Ingo Weinzierl Changed the zoom process - the values in the chart request document are percentual values that apply to every axis.
Thu, 09 Jun 2011 10:31:22 +0000 Ingo Weinzierl Corrected axes/datasets mappings.
Wed, 08 Jun 2011 19:11:18 +0000 Sascha L. Teichmann Berechnung 4: Determine the gauges by their station position. This hopefully fixes segment assignment problems.
Wed, 08 Jun 2011 18:50:40 +0000 Sascha L. Teichmann Berechnung 4: Added more debug output
Wed, 08 Jun 2011 13:57:43 +0000 Ingo Weinzierl #103 PART 1: The numbers which are written into the static DESCRIBE part are i18n formatted now.
Wed, 08 Jun 2011 13:32:56 +0000 Ingo Weinzierl #93 Changed the name of calculation type 4.
Wed, 08 Jun 2011 13:03:21 +0000 Ingo Weinzierl Made the chart range determination more robust against NaN values.
Wed, 08 Jun 2011 12:35:44 +0000 Ingo Weinzierl Set the second y axis to axis position 1 (starts at 0).
Wed, 08 Jun 2011 10:25:39 +0000 Sascha L. Teichmann s@m³/s@m\\u00b3/s@
Wed, 08 Jun 2011 10:21:36 +0000 Sascha L. Teichmann s@m³/s@m\u00b3/s@
Wed, 08 Jun 2011 10:19:23 +0000 Sascha L. Teichmann Only generate an axis element if a axis really exists.
Tue, 07 Jun 2011 21:01:09 +0000 Sascha L. Teichmann BackJumpCorrector: Simpified array swapping.
Tue, 07 Jun 2011 15:05:12 +0000 Sascha L. Teichmann Use java.util.List instead of java.util.Vector. Removed superfluous imports.
Tue, 07 Jun 2011 14:28:44 +0000 Sascha L. Teichmann code clean up in states
Tue, 07 Jun 2011 13:15:02 +0000 Ingo Weinzierl The ChartInfoGenerator appends axes range information to the document now.
Tue, 07 Jun 2011 11:43:30 +0000 Sascha L. Teichmann If Artifact.feed() fails do not store invalid values in database.
Mon, 06 Jun 2011 11:34:44 +0000 Sascha L. Teichmann Removed asymmetrical "- 1" from width calculation.
Sun, 05 Jun 2011 20:47:51 +0000 Sascha L. Teichmann Berechnung 4: Fixed problem when more than one value per segment are given.
Sun, 05 Jun 2011 18:24:46 +0000 Sascha L. Teichmann Refactored version of "Berechnung 4"
Fri, 03 Jun 2011 10:21:13 +0000 Ingo Weinzierl #90 Removed margins between data area border and curves.
Fri, 03 Jun 2011 07:20:39 +0000 Ingo Weinzierl Refactored the chart creation in the ChartInfoGenerators. Now, every chart is created by the XYChartGenerator again.
Fri, 03 Jun 2011 06:47:51 +0000 Ingo Weinzierl Charts are zoomed to a specified view if the attribute document for the chart creation contains an x and/or y range.
Thu, 02 Jun 2011 15:47:08 +0000 Sascha L. Teichmann Set collection ttl to 6 hours.
Wed, 01 Jun 2011 17:01:44 +0000 Sascha L. Teichmann Added parser for segments
Wed, 01 Jun 2011 09:57:22 +0000 Sascha L. Teichmann Fix crashes in back jump correction.
Wed, 01 Jun 2011 09:18:00 +0000 Ingo Weinzierl The matrix that is used to transform chart image coordinates into chart coordinates supports inverted x-axis now.
Wed, 01 Jun 2011 08:01:07 +0000 Ingo Weinzierl Introduced a new output generators for creating chart info documents.
Tue, 31 May 2011 14:56:18 +0000 Ingo Weinzierl Added support for the 'type' parameter of the collection's out() operation.
Tue, 31 May 2011 09:35:19 +0000 Sascha L. Teichmann Use an explicit reference km for interpolation now.
Mon, 30 May 2011 11:34:06 +0000 Sascha L. Teichmann Introduce a cache for the distance-info service
Mon, 30 May 2011 09:19:57 +0000 Sascha L. Teichmann flys/issue82: Only successful interpolations are named.
Fri, 27 May 2011 16:52:37 +0000 Sascha L. Teichmann Re-eanbled the calculation of the backjump correction.
Fri, 27 May 2011 10:09:46 +0000 Ingo Weinzierl Removed XML debug statement.
Fri, 27 May 2011 10:03:07 +0000 Ingo Weinzierl Moved the code part that skips themes to a better place. This let us paint empty charts with no themes at all.
Fri, 27 May 2011 09:47:13 +0000 Ingo Weinzierl We will no longer put deactivated themes into the chart.
Fri, 27 May 2011 08:46:26 +0000 Ingo Weinzierl Fixed the process of creating and storing the attribute of a collection.
Thu, 26 May 2011 16:54:16 +0000 Sascha L. Teichmann Make "Berechnungsart 4" work independent of flow direction. Commented out back jump correction temporarily.
Thu, 26 May 2011 15:55:48 +0000 Sascha L. Teichmann Generate fields for w/q input depend on flow direction.
Thu, 26 May 2011 14:27:06 +0000 Sascha L. Teichmann Take the flow direction into account.
Thu, 26 May 2011 09:41:57 +0000 Sascha L. Teichmann Round exploded values to a precision of 1e-6.
Wed, 25 May 2011 15:31:25 +0000 Sascha L. Teichmann WST value table: Qs are now stored in ranges for each column.
Tue, 24 May 2011 14:46:45 +0000 Sascha L. Teichmann First part of storing qs in ranges
Tue, 24 May 2011 13:24:24 +0000 Ingo Weinzierl Small bugfixes in the WQ selection state.
Tue, 24 May 2011 12:58:55 +0000 Ingo Weinzierl ISSUE-40 (part I/II) Write values that the user had former selected / inserted into DESCRIBE document to preselect such data in the UI.
Tue, 24 May 2011 12:40:06 +0000 Ingo Weinzierl Removed needless imports.
Tue, 24 May 2011 12:37:45 +0000 Ingo Weinzierl ISSUE-85 (part III/III) Use the given kilometer values for the waterlevel computation.
Tue, 24 May 2011 11:27:37 +0000 Ingo Weinzierl ISSUE-85 (part I/III) Added further fields for the location/range state.
Tue, 24 May 2011 11:23:57 +0000 Sascha L. Teichmann Moved WST value table cache key to a separate class.
Mon, 23 May 2011 22:33:37 +0000 Sascha L. Teichmann Introduce model to store q values of WST columns efficiently.
Mon, 23 May 2011 15:11:55 +0000 Ingo Weinzierl ISSUE-62 (part I/II) States are no longer filled with data - if a state needs user input, it needs to query the owner artifact.
Mon, 23 May 2011 14:32:17 +0000 Ingo Weinzierl Added a method to dump the artifacts state/data.
Mon, 23 May 2011 13:35:52 +0000 Sascha L. Teichmann flys/issue84: Forget to select wst kind.
Fri, 20 May 2011 10:41:46 +0000 Sascha L. Teichmann fix for flys/issue81: km weights were swapped
Fri, 20 May 2011 09:23:09 +0000 Ingo Weinzierl Tagged release 2.3.1 of flys-artifacts.
Fri, 20 May 2011 09:21:38 +0000 Ingo Weinzierl Prepared Changes for the upcoming release.
Fri, 20 May 2011 09:23:09 +0000 Ingo Weinzierl Tagged release 2.3.1 of flys-artifacts.
Fri, 20 May 2011 06:04:42 +0000 Hans Plum Notes to Release V 2.3.1
Thu, 19 May 2011 14:51:53 +0000 Sascha L. Teichmann Increment kms array size by one to take the end of range, too.
Thu, 19 May 2011 14:38:15 +0000 Sascha L. Teichmann Use unsharp km lookup (epsilon = 0.0001).
Thu, 19 May 2011 12:39:41 +0000 Ingo Weinzierl ISSUE-66 Fixed broken english subtitle template for longitudinal section charts.
Thu, 19 May 2011 12:33:12 +0000 Ingo Weinzierl The curve of a computed discharge curve has a human readable text now.
Thu, 19 May 2011 09:54:57 +0000 Sascha L. Teichmann Reintroduced titles for the "W for unausgeglichene Abfluesse".
Thu, 19 May 2011 09:45:29 +0000 Ingo Weinzierl Added names for discharge curves (at gauges).
Thu, 19 May 2011 09:31:47 +0000 Sascha L. Teichmann Removed dead code
Thu, 19 May 2011 09:24:08 +0000 Sascha L. Teichmann use correct kms and step width now now
Wed, 18 May 2011 17:37:06 +0000 Sascha L. Teichmann Use new logic to calculate "W für ungleichwertige Abfluesse". Not working yet.
Wed, 18 May 2011 10:59:38 +0000 Ingo Weinzierl Enabled the discharge longitudinal section to be exported as WST.
Wed, 18 May 2011 09:11:10 +0000 Sascha L. Teichmann flys/issue69: Connected calculation with the UI
Wed, 18 May 2011 09:02:50 +0000 Ingo Weinzierl W and Q curves in longitudinal section curves will now have names.
Wed, 18 May 2011 08:04:54 +0000 Ingo Weinzierl WSTs will now have a header that contains the names of the Ws or Qs that had been defined for the computation.
Tue, 17 May 2011 16:31:07 +0000 Ingo Weinzierl Implemented writer that creates WSTs and enabled the WaterlevelExporter to create those.
Tue, 17 May 2011 14:22:27 +0000 Ingo Weinzierl Added a new class that supports formatters for different types of data.
Tue, 17 May 2011 11:53:02 +0000 Ingo Weinzierl ISSUE-72 Repaired broken XPath expression in MainValuesService to extract start and end kilometer.
Tue, 17 May 2011 08:55:38 +0000 Sascha L. Teichmann Separated the WST table loading logic from the calculations.
Tue, 17 May 2011 07:39:33 +0000 Ingo Weinzierl Tagged RELEASE 2.3
Mon, 16 May 2011 10:34:59 +0000 Hans Plum Added NEWS File for collecting enduser-sepcific information for releases
Sun, 15 May 2011 21:08:41 +0000 Sascha L. Teichmann First step to calculate "W fuer ungleichwertige Abfluesse" correctly. flys/issue55
Sun, 15 May 2011 10:59:08 +0000 Sascha L. Teichmann Fix step to fix issue69: Do the right calculation
Fri, 13 May 2011 11:26:29 +0000 Ingo Weinzierl Prepared Changes for the upcoming release 2.3.
Fri, 13 May 2011 08:00:58 +0000 Ingo Weinzierl ISSUE-37 The river state wants to be rendered using a river_panel UI provider.
Thu, 12 May 2011 09:11:16 +0000 Ingo Weinzierl Charts are generated using the size defined in the incoming request document.
Wed, 11 May 2011 16:31:38 +0000 Ingo Weinzierl ISSUE-52 The longitudinal section charts will now always have the head of the river at the left side.
Wed, 11 May 2011 09:51:54 +0000 Sascha L. Teichmann MetaDataService: Make incoming XML symmetric to DistanceInfoService.
Tue, 10 May 2011 17:57:56 +0000 Ingo Weinzierl ISSUE-47 Adjusted the line color of W, Q and corrected W curves (temporarilly).
Tue, 10 May 2011 17:12:15 +0000 Ingo Weinzierl Display gridlines in charts.
Tue, 10 May 2011 16:10:01 +0000 Ingo Weinzierl ISSUE-53 Formatted number values of CSV exports.
Tue, 10 May 2011 15:28:30 +0000 Ingo Weinzierl Implemented the input validation of WQ in the adapted WQ panel.
Tue, 10 May 2011 13:18:03 +0000 Ingo Weinzierl The CSV exports will now have headers.
Tue, 10 May 2011 12:43:12 +0000 Sascha L. Teichmann Datacage: Added river parameter to meta data services.
Tue, 10 May 2011 12:19:17 +0000 Ingo Weinzierl Added subtitles to the available charts.
Tue, 10 May 2011 11:40:15 +0000 Ingo Weinzierl Added a method to Resources that returns translated compound messages.
Tue, 10 May 2011 10:26:26 +0000 Ingo Weinzierl Improved the OutGenerator interface to set a master artifact for the out generation.
Tue, 10 May 2011 07:40:06 +0000 Ingo Weinzierl Enabled the WINFO artifact to choose between W and Q mode in the adapted wq panel of the discharge longitudinal section computation.
Mon, 09 May 2011 19:54:24 +0000 Sascha L. Teichmann Datacage service: Cleanup served XML document.
Mon, 09 May 2011 13:47:15 +0000 Sascha L. Teichmann Datacage: Added forgotten columns of fixation WST to datcage template.
Mon, 09 May 2011 12:53:49 +0000 Ingo Weinzierl Enabled i18n support for charts.
Mon, 09 May 2011 09:55:47 +0000 Ingo Weinzierl Added a CSV exporter for the discharge longitudinal section computation.
Sat, 07 May 2011 21:34:02 +0000 Sascha L. Teichmann Back jump correction should work now for both flow directions.
Fri, 06 May 2011 16:49:31 +0000 Sascha L. Teichmann Added data cage configuration for 'Längsschnitt'.
Fri, 06 May 2011 14:19:27 +0000 Ingo Weinzierl Implemented methods to retrieve and compute the data used to create discharge longitudinal sections.
Thu, 05 May 2011 12:34:53 +0000 Ingo Weinzierl Small bugfix in the adapted WQ state and further i18n strings.
Thu, 05 May 2011 12:31:28 +0000 Ingo Weinzierl Changed the y-axis title of the computed discharge curve.
Thu, 05 May 2011 06:12:44 +0000 Ingo Weinzierl Improved the transition model and added states to enable the 'discharge longitudinal section' computation - NOTE: the work in this computation has not finished yet.
Thu, 05 May 2011 05:27:41 +0000 Ingo Weinzierl Use a default step width (100m) between two kilometers if no width is given.
Thu, 05 May 2011 04:52:47 +0000 Ingo Weinzierl Fixed a potential NullPointerException while creating a longitudinal section chart.
Wed, 04 May 2011 17:01:22 +0000 Sascha L. Teichmann fix flys/issue30
Wed, 04 May 2011 13:51:25 +0000 Sascha L. Teichmann 'berechnete Abflusskurve': generate ws from qs
Wed, 04 May 2011 10:10:11 +0000 Ingo Weinzierl Filled the discharge curve exporter (CSV) with code - now, it generates a CSV export with the computed discharge curve data.
Wed, 04 May 2011 08:24:50 +0000 Ingo Weinzierl Enabled the WINFO artifact to compute the data for discharge curves (computed) - ComputedDischargeCurveGenerator uses those values now to create the chart.
Wed, 04 May 2011 07:48:39 +0000 Ingo Weinzierl Improved the transition model and added classes to enable the WINFO artifact to create computed discharge curves - NOTE: each of the new classes is just a stub.
Tue, 03 May 2011 17:37:56 +0000 Ingo Weinzierl Added an exporter to export the computed data of a duration curve.
Tue, 03 May 2011 17:34:29 +0000 Ingo Weinzierl Modified a confusing debug statement.
Tue, 03 May 2011 16:36:21 +0000 Ingo Weinzierl Added an exporter (OutGenerator) for waterlevels which currently supports CSV exports.
Tue, 03 May 2011 16:26:35 +0000 Ingo Weinzierl Introduced an export output target on collection level that enables collections to be exported.
Tue, 03 May 2011 13:23:00 +0000 Ingo Weinzierl I18N Bugfix.
Tue, 03 May 2011 13:15:56 +0000 Ingo Weinzierl Added i18n strings for the location selection.
Tue, 03 May 2011 12:05:32 +0000 Ingo Weinzierl Enabled the WINFO artifact to create duration curves - new OutGenerator, added methods for data computation.
Tue, 03 May 2011 09:23:17 +0000 Sascha L. Teichmann visualize-transitions.xsl: State quoting was done wrong.
Mon, 02 May 2011 16:58:04 +0000 Ingo Weinzierl Enhanced the transition model to reach a state that creates duration curves.
Mon, 02 May 2011 16:50:58 +0000 Sascha L. Teichmann Flush/persist cache at end of program.
Mon, 02 May 2011 16:44:02 +0000 Ingo Weinzierl The DischargeCurveGenerator uses public methods of FLYSArtifact to retrieve all necessary information of the current settings.
Mon, 02 May 2011 16:28:57 +0000 Sascha L. Teichmann Moved expensive allocation of result arrays out of km loop.
Mon, 02 May 2011 15:17:04 +0000 Ingo Weinzierl Enabled the FLYSArtifact to handle an array of inserted WQ values (without given ranges).
Mon, 02 May 2011 13:42:02 +0000 Sascha L. Teichmann Repaired DischargeTables.getQForW()
Mon, 02 May 2011 12:47:10 +0000 Ingo Weinzierl Enabled the server to handle longitudinal section chart requests with inserted W data - Ws are transformed into Qs then.
Mon, 02 May 2011 12:41:24 +0000 Ingo Weinzierl Removed an unused parameter from DischargeTables.getQForW().
Mon, 02 May 2011 09:41:22 +0000 Ingo Weinzierl Ws and Qs of a longitudinal section chart are mapped to an own range axis now.
Sun, 01 May 2011 10:58:38 +0000 Sascha L. Teichmann Added caching support for the wst value tables.
Fri, 29 Apr 2011 16:56:37 +0000 Sascha L. Teichmann Added ehcache support.
Fri, 29 Apr 2011 15:10:44 +0000 Sascha L. Teichmann Added meta data service.
Fri, 29 Apr 2011 14:39:42 +0000 Sascha L. Teichmann Added meta service stub. TODO: Add meta data builder.
Fri, 29 Apr 2011 13:06:49 +0000 Ingo Weinzierl Bugfix: Changed the datastructure of the ThemeList (inner class of FLYSArtifactCollection) to store the theme of a chart in an ordered list -> Q curves of longitudinal section charts are now drawn.
Fri, 29 Apr 2011 10:13:24 +0000 Ingo Weinzierl Implemented the chart creation of a longitudinal section chart - W and Q facets.
Fri, 29 Apr 2011 10:02:59 +0000 Ingo Weinzierl Improved the calculation of the step width of ranges.
Fri, 29 Apr 2011 10:01:41 +0000 Ingo Weinzierl New method WQKms.size() to retrieve the number of elements in the data pool.
Fri, 29 Apr 2011 08:39:17 +0000 Sascha L. Teichmann WQKms model: Added a get() method which takes destination array as an argument.
Fri, 29 Apr 2011 08:28:44 +0000 Ingo Weinzierl Introduced GNU Trove to store WQKms values in a more performant data structure.
Fri, 29 Apr 2011 08:13:56 +0000 Ingo Weinzierl Added the name of the facet to the parameterlist of OutGenerator.doOut().
Fri, 29 Apr 2011 08:02:54 +0000 Ingo Weinzierl Added themes and mappings for the W and Q theme of a longitudinal section curve.
Fri, 29 Apr 2011 07:46:27 +0000 Ingo Weinzierl Added necessary methods to start the computation of waterlevel data.
Fri, 29 Apr 2011 07:27:05 +0000 Ingo Weinzierl Introduced a model class to store a set of triple data objects that consist of W, Q and Kms information.
Fri, 29 Apr 2011 07:22:25 +0000 Ingo Weinzierl Bugfix: Removed endless loop and a bug while iterating over Hibernate results.
Thu, 28 Apr 2011 12:54:11 +0000 Ingo Weinzierl Added an OutGenerator for creating longitudinal section curves.
Thu, 28 Apr 2011 12:23:40 +0000 Ingo Weinzierl Bugfix: Added missing <output-generators> section to the global configuration.
Thu, 28 Apr 2011 11:32:41 +0000 Ingo Weinzierl Added a further state that is reached if the waterlevel calculation mode has been chosen.
Thu, 28 Apr 2011 11:22:45 +0000 Ingo Weinzierl Added a new Transition to compare values.
Thu, 28 Apr 2011 11:20:11 +0000 Ingo Weinzierl Bugfixes: Adapted a broken method call of TransitionEngine.isStateReachable() and added the outputs of a current state to the DESCRIBE.
Thu, 28 Apr 2011 11:16:21 +0000 Ingo Weinzierl Bugfix: Added the missing init() method to a Transition and call it in the TransitionFactory after a Transition has been created.
Thu, 28 Apr 2011 11:13:06 +0000 Ingo Weinzierl Bugfix: The outputs of a Collection's attribute document are stored in an outputs node now instead of being stored toplevel in the document.
Thu, 28 Apr 2011 11:08:34 +0000 Ingo Weinzierl Throw an illegal argument exception in LocationDistanceSelect.validate() and WQSelect.validate() if no data has been inserted so far.
Thu, 28 Apr 2011 09:09:44 +0000 Sascha L. Teichmann Added XSL transformation do create Graphviz digraph out of conf.xml
Thu, 28 Apr 2011 08:14:20 +0000 Ingo Weinzierl The OutGenerator gets the theme of a facet while output creation.
Wed, 27 Apr 2011 14:42:52 +0000 Ingo Weinzierl Removed useless imports.
Wed, 27 Apr 2011 14:40:44 +0000 Ingo Weinzierl Added an abstract OutGenerator that should be the base class for all generators which create charts.
Wed, 27 Apr 2011 14:35:44 +0000 Ingo Weinzierl Improved the out() operation of a Collection - the OutGenerator gets to know about the facets and its theme.
Tue, 26 Apr 2011 13:29:18 +0000 Ingo Weinzierl The Attributes of a collection are written into its DESCRIBE now.
Tue, 26 Apr 2011 13:17:08 +0000 Ingo Weinzierl Initialized the facet2theme mappings configured in themes.xml and added a function to the ThemeFactory that retrieves a theme from FLYSContext based on its name.
Fri, 22 Apr 2011 15:49:35 +0000 Sascha L. Teichmann Corrected a silly c&p mistake.
Fri, 22 Apr 2011 09:57:27 +0000 Sascha L. Teichmann Implementation of the "Ruecksprungkorrektur" to be done in "W fuer angepassten Abflusslaengschnitt".
Thu, 21 Apr 2011 08:49:58 +0000 Ingo Weinzierl Removed debug code that has been commited by accident.
Thu, 21 Apr 2011 08:47:39 +0000 Ingo Weinzierl Added a first small theme configuration and code to read it.
Thu, 21 Apr 2011 08:44:41 +0000 Ingo Weinzierl Implementation of interfaces and its default implementations and a factory to work with themes.
Wed, 20 Apr 2011 14:26:51 +0000 Sascha L. Teichmann Implementation of "Abflusskurve/Abflusstafel" calculation.
Wed, 20 Apr 2011 13:13:19 +0000 Sascha L. Teichmann Added dependency to Apache Commons Math 2.2 (Apache License 2.0)
Wed, 20 Apr 2011 09:46:40 +0000 Sascha L. Teichmann Discharge table: Fix problem when sorting by q (copied w instead of q).
Wed, 20 Apr 2011 08:00:38 +0000 Ingo Weinzierl Fixed broken HQL statement.
Tue, 19 Apr 2011 17:43:39 +0000 Sascha L. Teichmann Implemented the "Wasserstand/Wasserspiegellagen" calculation.
Tue, 19 Apr 2011 17:37:21 +0000 Sascha L. Teichmann Discharge table: we need a getQForW() and not a getWForQ().
Tue, 19 Apr 2011 14:48:28 +0000 Sascha L. Teichmann Discharge tables: Sorting of q values was done wrong.
Tue, 19 Apr 2011 13:10:27 +0000 Ingo Weinzierl The list of annotations returned by the AnnotationFactory is ordered by its range.
Tue, 19 Apr 2011 12:33:39 +0000 Ingo Weinzierl Added a service that returns the MainValues of a Gauge based on a river name and a stationing.
Tue, 19 Apr 2011 12:31:07 +0000 Ingo Weinzierl Added a factory that returns MainValues.
Tue, 19 Apr 2011 11:05:27 +0000 Sascha L. Teichmann Discharge table: Added static method getWForQ() to interpolate a w value for a given q value based on a given discharge table.
Tue, 19 Apr 2011 10:32:31 +0000 Sascha L. Teichmann Discharge tables: Added convenience constructors/methods to ease the access to the master discharge table of a gauge.
Mon, 18 Apr 2011 16:01:23 +0000 Sascha L. Teichmann Moved the query complexity of creating a w/q value table into view
Mon, 18 Apr 2011 14:40:35 +0000 Sascha L. Teichmann Fetches w/q value tables from the backend.
Mon, 18 Apr 2011 13:23:12 +0000 Ingo Weinzierl Changed the error key that is written to the result document of the feed operation.
Mon, 18 Apr 2011 13:21:52 +0000 Ingo Weinzierl The inserted river is validated in the feed operation().
Mon, 18 Apr 2011 13:00:57 +0000 Ingo Weinzierl The calculation method is validated in the feed() operation.
Mon, 18 Apr 2011 12:36:08 +0000 Ingo Weinzierl The inserted ranges (distance and WQ ranges) are validated in the feed() operation.
Mon, 18 Apr 2011 09:34:18 +0000 Ingo Weinzierl Removed testing code that has been comitted by accident in the last revision.
Mon, 18 Apr 2011 07:39:17 +0000 Ingo Weinzierl The getGauge() method of the FLYSArtifact returns the first gauge based on the given stationing now.
Fri, 15 Apr 2011 13:47:10 +0000 Ingo Weinzierl The WQ state fills the DESCRIBE with default values for W and Q.
Fri, 15 Apr 2011 13:46:22 +0000 Ingo Weinzierl Added a WstFactory to return Wst objects.
Fri, 15 Apr 2011 13:37:51 +0000 Ingo Weinzierl FLYSArtifact provides methods to retrieve the real River, Gauge objects.
Fri, 15 Apr 2011 10:10:37 +0000 Ingo Weinzierl Bugfix: repaired broken imports of the session holder.
Fri, 15 Apr 2011 09:52:37 +0000 Ingo Weinzierl Removed the SessionHolder and adapted imports.
Thu, 14 Apr 2011 13:45:50 +0000 Sascha L. Teichmann Acquire/release sessions in services to avoid db connection leaks.
Thu, 14 Apr 2011 13:36:06 +0000 Ingo Weinzierl The location/distance state now writes default values into DESCRIBE.
Thu, 14 Apr 2011 13:26:29 +0000 Ingo Weinzierl Added a new function to RiverFactory that retrieves a River object based on a given river name.
Thu, 14 Apr 2011 13:15:16 +0000 Sascha L. Teichmann Backend access: Static methods are using the SessionHolder, too.
Thu, 14 Apr 2011 13:11:12 +0000 Ingo Weinzierl Finalized the SessionCallContextListener and registered it as CallContext.Listener in the configuration.
Thu, 14 Apr 2011 12:59:21 +0000 Ingo Weinzierl Bugfix: Call correct method to retrieve and initialize an instance of SessionFactoryProvider.
Thu, 14 Apr 2011 12:08:47 +0000 Sascha L. Teichmann Added a session holder to hold hibernate sessions.
Thu, 14 Apr 2011 11:18:28 +0000 Ingo Weinzierl Added an Implementation of CallContext.Listener to open/close Hibernate Sessions for each request.
Thu, 14 Apr 2011 08:32:18 +0000 Ingo Weinzierl Modified the states' describe() method - related to the last commit.
Thu, 14 Apr 2011 08:23:15 +0000 Ingo Weinzierl Removed the state to explicitly select a gauge.
Wed, 13 Apr 2011 08:31:20 +0000 Ingo Weinzierl Bugfix: Repaired the dynamic UI part of the RiverSelect state in DESCRIBE.
Tue, 12 Apr 2011 13:42:14 +0000 Ingo Weinzierl Write the name of an artifact into the DESCRIBE document.
Tue, 12 Apr 2011 07:49:36 +0000 Ingo Weinzierl Bugfix: States are filled with data before they describe themself.
Mon, 11 Apr 2011 12:54:03 +0000 Ingo Weinzierl Implemented a service that retrieves distance information for a specific river.
Wed, 06 Apr 2011 10:01:49 +0000 Ingo Weinzierl The FLYSArtifactCollection overrides out() and uses OutGenerators to create output for this operation.
Wed, 06 Apr 2011 09:56:38 +0000 Ingo Weinzierl Added a DischargeCurveGenerator that creates discharge curves.
Wed, 06 Apr 2011 09:53:14 +0000 Ingo Weinzierl Changed the visibility of getData() method of FLYSArtifacts.
Sun, 03 Apr 2011 10:55:16 +0000 Sascha L. Teichmann Removed trailing whitespace.
Sun, 03 Apr 2011 10:53:14 +0000 Sascha L. Teichmann Make project compilable again.
Thu, 31 Mar 2011 10:56:08 +0000 Ingo Weinzierl Added code to parse the configured OutGenerators in the global configuration and to save a map of such in the FLYSContext.
Thu, 31 Mar 2011 10:54:07 +0000 Ingo Weinzierl Added an OutGenerator interface that might be used to generator collected outputs of a set of artifacts.
Wed, 30 Mar 2011 16:00:51 +0000 Ingo Weinzierl Removed the Backend reference from FLYSArtifactCollection.
Wed, 30 Mar 2011 15:21:12 +0000 Ingo Weinzierl Enhanced the output mode for discharge curves with three facets.
Wed, 30 Mar 2011 13:47:02 +0000 Ingo Weinzierl Tagged RELEASE 0.1 of FLYS Artifacts.
Wed, 30 Mar 2011 08:22:30 +0000 Ingo Weinzierl Renamed an output mode in the WINFO artifact configuration.
Tue, 29 Mar 2011 13:57:25 +0000 Ingo Weinzierl Changed a german string in the resource bundle.
Tue, 29 Mar 2011 09:54:06 +0000 Ingo Weinzierl Adapted the available calculation modes of WINFO and its order in the DESCRIBE document.
Mon, 28 Mar 2011 16:58:17 +0000 Ingo Weinzierl Added the hash code of an artifact to the artifact part of the collection's DESCRIBE document.
Mon, 28 Mar 2011 16:36:13 +0000 Ingo Weinzierl Changed the background color of discharge curves to white.
Mon, 28 Mar 2011 15:21:27 +0000 Sascha L. Teichmann DischargeTables: Cache the scale, too. Otherwise two calls to getValues() with different arguments will result in the same output.
Mon, 28 Mar 2011 14:33:36 +0000 Ingo Weinzierl The out() operation of the WINFO artifact draws discharge tables for gauges specified by the user.
Mon, 28 Mar 2011 10:48:27 +0000 Ingo Weinzierl Added a helper class to export charts.
Mon, 28 Mar 2011 09:17:25 +0000 Sascha L. Teichmann Add factory to fetch gauges from database and filter them
Fri, 25 Mar 2011 13:51:09 +0000 Sascha L. Teichmann Don't used interleaved x/y data.
Fri, 25 Mar 2011 11:03:51 +0000 Ingo Weinzierl Updated the TODO list.
Fri, 25 Mar 2011 10:23:59 +0000 Ingo Weinzierl Bugfix: Added a missing artifact namespace prefix in the DESCRIBE document of a FLYSArtifactCollection.
Thu, 24 Mar 2011 18:47:07 +0000 Ingo Weinzierl Implemented a FLYSArtifactCollection that will be used in this application now.
Thu, 24 Mar 2011 17:29:08 +0000 Sascha L. Teichmann Fetch w/q values of discharge tables for given gauges.
Thu, 24 Mar 2011 17:06:08 +0000 Ingo Weinzierl Added a further german resource bundle.
Wed, 23 Mar 2011 10:52:01 +0000 Ingo Weinzierl The DESCRIBE of the WINFO artifact contains the available output modes now.
Tue, 22 Mar 2011 16:09:30 +0000 Ingo Weinzierl The location_distance state of the WINFO parameterization has an output mode 'discharge_table' now.
Mon, 21 Mar 2011 09:18:04 +0000 Ingo Weinzierl Append human readable strings of the selected values to the DESCRIBE output.
Mon, 21 Mar 2011 09:16:17 +0000 Ingo Weinzierl Added some more calculation types (to the DESCRIBE in the calculation select state).
Mon, 21 Mar 2011 08:17:15 +0000 Ingo Weinzierl Implemented the step-back part of the advance() operation.
Mon, 21 Mar 2011 06:11:01 +0000 Ingo Weinzierl Fixed a german umlaut.
Fri, 18 Mar 2011 09:42:21 +0000 Ingo Weinzierl Added new states to insert location/distance and w/q data in the config of a WINFO artifact.
Fri, 18 Mar 2011 09:38:11 +0000 Ingo Weinzierl Added a new state for the W/Q input in the WINFO parameterization.
Fri, 18 Mar 2011 08:50:42 +0000 Ingo Weinzierl New state for the location/distance input and some litte modifications of the DefaultState.
Thu, 17 Mar 2011 16:37:39 +0000 Ingo Weinzierl Added a method to retrieve the UIProvider for a state.
Thu, 17 Mar 2011 16:03:36 +0000 Ingo Weinzierl Let the states describe the static ui part.
Thu, 17 Mar 2011 12:17:37 +0000 Ingo Weinzierl The 'rivers' service retrieves the rivers from backend now.
Thu, 17 Mar 2011 11:46:43 +0000 Sascha L. Teichmann Added support for the flys backend and an example how to use it.
Tue, 15 Mar 2011 17:12:58 +0000 Sascha L. Teichmann Added section in configuration for database backend.
Tue, 15 Mar 2011 15:53:02 +0000 Sascha L. Teichmann Fixed build error coming from different import of XMLUtils.
Mon, 14 Mar 2011 17:43:52 +0000 Ingo Weinzierl Appended a missing node to the DESCRIBE.
Mon, 14 Mar 2011 16:32:42 +0000 Ingo Weinzierl I18N of strings for the DESCRIBE document.
Mon, 14 Mar 2011 15:47:10 +0000 Ingo Weinzierl Introduced a state to select the calculation mode.
Mon, 14 Mar 2011 15:43:12 +0000 Ingo Weinzierl Added an abstract base class DefaultState for States.
Mon, 14 Mar 2011 14:16:37 +0000 Ingo Weinzierl Implemented a singleton instance that provides i18n strings.
Thu, 10 Mar 2011 13:31:36 +0000 Ingo Weinzierl Appende the static data to the static node of the DESCRIBE document.
Thu, 10 Mar 2011 08:38:05 +0000 Ingo Weinzierl The operations feed() and advance() return the current description of the artifact now.
Thu, 10 Mar 2011 05:56:17 +0000 Ingo Weinzierl Implemented the step-forward part of the advance operation.
Wed, 09 Mar 2011 14:13:57 +0000 Ingo Weinzierl Implemented the feed() operation.
Wed, 09 Mar 2011 14:07:03 +0000 Ingo Weinzierl Added a TODO file.
Wed, 09 Mar 2011 11:29:07 +0000 Ingo Weinzierl Added a FLYSArtifact that serves as the default artifact for the FLYS application.
Tue, 08 Mar 2011 17:22:37 +0000 Ingo Weinzierl Added a RiverService (/service/rivers) that retrieves a list of provided rivers.
Mon, 07 Mar 2011 14:43:14 +0000 Ingo Weinzierl Added a nodes for the user-factory and collection-factory to the configuration.
Tue, 01 Mar 2011 17:18:08 +0000 Ingo Weinzierl Replaced the 'special' attribute of the DESCRIBE with a 'uiprovider' attribute.
Tue, 08 Feb 2011 09:11:25 +0000 Ingo Weinzierl The RiverSelect state creates the dynamic UI part for the describe document now.
Tue, 08 Feb 2011 09:02:18 +0000 Ingo Weinzierl Added mockup classes for working with rivers.
Mon, 07 Feb 2011 17:42:14 +0000 Ingo Weinzierl The input data items of a state are read from configuration after the state has been setup.
Mon, 07 Feb 2011 11:37:33 +0000 Ingo Weinzierl Added the current state and reachable states description to the describe document of the WINFO artifact.
Mon, 07 Feb 2011 11:32:59 +0000 Ingo Weinzierl Changed the way of storing transitions in the TransitionEngine.
Fri, 04 Feb 2011 16:57:08 +0000 Ingo Weinzierl Improved the WINFO artifact. Describe() returns the uuid and the hash of the artifact instead of just nothing.
Fri, 04 Feb 2011 11:18:59 +0000 Ingo Weinzierl Improved the init process of the WINFOArtifact - there are two new states to select the river and the gauge.
Fri, 04 Feb 2011 11:09:11 +0000 Ingo Weinzierl Improved the bootstrap process - the states are initialized.
Thu, 03 Feb 2011 10:23:30 +0000 Ingo Weinzierl Initializes a TransitionEngine storing all transitions for each artifact at the application start.
Wed, 02 Feb 2011 14:56:22 +0000 Ingo Weinzierl Added a first stub of an WINFO artifact.
Tue, 01 Feb 2011 17:56:29 +0000 Sascha L. Teichmann Added initial mvn project for FLYS artifacts.

http://dive4elements.wald.intevation.org