| Fri, 07 Oct 2011 13:14:37 +0000 |
Felix Wolfsteller |
Cosmetics.
|
| Fri, 07 Oct 2011 10:51:09 +0000 |
Ingo Weinzierl |
Bugfix: #353 Enabled chart's to be drawn with proper axes set even if no data is contained.
|
| Fri, 07 Oct 2011 09:40:15 +0000 |
Ingo Weinzierl |
Changed max number of digits for AT exports.
|
| Thu, 06 Oct 2011 14:36:05 +0000 |
Sascha L. Teichmann |
ATWriter: Get rid of buggy first line code.
|
| Wed, 05 Oct 2011 16:58:38 +0000 |
Sascha L. Teichmann |
fixed flys/issue201
|
| Wed, 05 Oct 2011 15:04:00 +0000 |
Sascha L. Teichmann |
fixed flys/issue177
|
| Wed, 05 Oct 2011 14:23:53 +0000 |
Ingo Weinzierl |
Improved the creation/rendering of annotations (km favorites, mainvalues).
|
| Wed, 05 Oct 2011 13:16:44 +0000 |
Sascha L. Teichmann |
Removed code duplication of guessWaterIncreasing()
|
| Wed, 05 Oct 2011 11:23:18 +0000 |
Ingo Weinzierl |
Bugfixes for various issues: Improved rendering process of annotations.
|
| Wed, 05 Oct 2011 10:36:40 +0000 |
Sascha L. Teichmann |
Backjump correction: Finally looks fine.
|
| Wed, 05 Oct 2011 10:26:54 +0000 |
Ingo Weinzierl |
AnnotationArtifact: Bugfixes and enabled cache support.
|
| Tue, 04 Oct 2011 16:36:19 +0000 |
Sascha L. Teichmann |
flys/issue31: Simplified the back jump correction code a lot.
|
| Tue, 04 Oct 2011 15:30:09 +0000 |
Ingo Weinzierl |
Modified code to determine the elevation model of Wsts in the LongitudinalSectionGenerator.
|
| Tue, 04 Oct 2011 15:29:39 +0000 |
Sascha L. Teichmann |
Moved some generic double array code from BackjumpCorrector to DoubleUtil
|
| Tue, 04 Oct 2011 15:23:31 +0000 |
Sascha L. Teichmann |
Added code to interpolate double values in a sorted array
|
| Tue, 04 Oct 2011 15:14:09 +0000 |
Sascha L. Teichmann |
Removed superfluous imports.
|
| Tue, 04 Oct 2011 13:38:21 +0000 |
Ingo Weinzierl |
Bugfix: #330 Add problem if no data was found for duration curves.
|
| Tue, 04 Oct 2011 11:28:37 +0000 |
Ingo Weinzierl |
Added facet and index information to theme which are stored at CollectionItems.
|
| Tue, 04 Oct 2011 07:37:05 +0000 |
Ingo Weinzierl |
Bugfix: #346 Modified x and y axis titles of longitudinal section charts.
|
| Fri, 30 Sep 2011 14:29:26 +0000 |
Ingo Weinzierl |
Bugfix: #351 Modified determination of single values specified by min/max values and an interval.
|
| Fri, 30 Sep 2011 09:41:22 +0000 |
Felix Wolfsteller |
Fix flys/issue334 (CrossSection output shown even without calculation result).
|
| Fri, 30 Sep 2011 08:02:21 +0000 |
Ingo Weinzierl |
Bugfix: #176 and #349 Create proper titles for W and Q waterlevel facets.
|
| Fri, 30 Sep 2011 05:31:34 +0000 |
Felix Wolfsteller |
Show proper labels for selected differences.
|
| Thu, 29 Sep 2011 18:19:45 +0000 |
Sascha L. Teichmann |
Fixed issues flys/issue244, flys/issue332
|
| Wed, 28 Sep 2011 15:47:57 +0000 |
Felix Wolfsteller |
Use StringUtil.wWrap , fix wrong loop, minor refac and cosmetics.
|
| Wed, 28 Sep 2011 15:37:59 +0000 |
Felix Wolfsteller |
Extracted/use StringUtil.wWrap .
|
| Wed, 28 Sep 2011 15:17:44 +0000 |
Ingo Weinzierl |
Write gauge determined in MainValuesService to log.
|
| Wed, 28 Sep 2011 15:02:33 +0000 |
Ingo Weinzierl |
Bugfix: #332 Made AT-exports compatible with desktop FLYS.
|
| Wed, 28 Sep 2011 14:01:00 +0000 |
Ingo Weinzierl |
Bugfix: #328 Improved datacage configuration and labels for selected waterlevels.
|
| Wed, 28 Sep 2011 09:17:20 +0000 |
Ingo Weinzierl |
Made feed() operation able to remove existing data items from Artifact's data pool.
|
| Wed, 28 Sep 2011 08:20:29 +0000 |
Felix Wolfsteller |
Extracted StringUtil.unbracket from WaterlevelSelectState.strip .
|
| Tue, 27 Sep 2011 15:19:59 +0000 |
Ingo Weinzierl |
Little modifications for making recommendations - will now work for states with background calculation.
|
| Tue, 27 Sep 2011 14:37:18 +0000 |
Felix Wolfsteller |
Enable auto-scaling axis for waterlevels in WDifference-plots.
|
| Tue, 27 Sep 2011 14:03:06 +0000 |
Felix Wolfsteller |
In W-Difference-calculation, respect indices of selected facets.
|
| Tue, 27 Sep 2011 13:45:13 +0000 |
Sascha L. Teichmann |
flys/issue317: Removed dependency from cross section demo app.
|
| Tue, 27 Sep 2011 12:40:42 +0000 |
Ingo Weinzierl |
Improved Facet creation for floodmaps - WSPLGEN and barriers Facets are only created if the calculation was successful.
|
| Tue, 27 Sep 2011 11:33:45 +0000 |
Ingo Weinzierl |
Improved WSPLGEN start to suppress inconsistent Artifact states.
|
| Tue, 27 Sep 2011 10:53:41 +0000 |
Ingo Weinzierl |
Improved regex used to track WSPLGEN errors - will now match critical errors as well.
|
| Tue, 27 Sep 2011 10:18:06 +0000 |
Sascha L. Teichmann |
Fixed whitespace usage in ChangeLog.
|
| Tue, 27 Sep 2011 10:15:27 +0000 |
Sascha L. Teichmann |
Removed superfluous imports
|
| Tue, 27 Sep 2011 10:06:19 +0000 |
Ingo Weinzierl |
Bugfix: #68 Set number format of chart plot axes based on the CallMeta instance for each request.
|
| Tue, 27 Sep 2011 10:00:29 +0000 |
Sascha L. Teichmann |
Cache: Increased number of cached annotations.
|
| Tue, 27 Sep 2011 09:35:18 +0000 |
Felix Wolfsteller |
Let WDifferences-diagram show more than one difference, if asked to.
|
| Tue, 27 Sep 2011 07:41:21 +0000 |
Ingo Weinzierl |
Bugfix: #320 Substitue '../' in shapefile directories.
|
| Mon, 26 Sep 2011 15:35:46 +0000 |
Ingo Weinzierl |
The extent of the WSPLGEN facets are now determined by the extent of the start and end CrossSectionTrack of the WSPLGEN calculation.
|
| Mon, 26 Sep 2011 13:37:30 +0000 |
Felix Wolfsteller |
Improved w-differences diagram generation with included 'absolute' values.
|
| Mon, 26 Sep 2011 13:17:55 +0000 |
Felix Wolfsteller |
Add positional-conflict-awareness when merging Facets in attribute
|
| Mon, 26 Sep 2011 13:10:40 +0000 |
Ingo Weinzierl |
Bugfix: #296 Set i18n titles for WSPLGEN and barriers WMS layers.
|
| Mon, 26 Sep 2011 13:10:17 +0000 |
Felix Wolfsteller |
Fix getPosition() in ManagedDomFacet.
|
| Fri, 23 Sep 2011 11:58:08 +0000 |
Felix Wolfsteller |
Squash a bug about wrongly named position attribute ('pos' vs 'art:pos').
|
| Fri, 23 Sep 2011 07:19:41 +0000 |
Felix Wolfsteller |
Minor refactoring, documentation.
|
| Fri, 23 Sep 2011 04:21:16 +0000 |
Felix Wolfsteller |
Added documentation.
|
| Thu, 22 Sep 2011 16:16:55 +0000 |
Ingo Weinzierl |
Made MetaDataService a subclass of FLYSService.
|
| Thu, 22 Sep 2011 12:49:18 +0000 |
Bjoern Schilberg |
Full blown mosel wms mapfile.
|
| Thu, 22 Sep 2011 10:07:22 +0000 |
Ingo Weinzierl |
Improved database session handling in services and artifacts.
|
| Thu, 22 Sep 2011 07:58:24 +0000 |
Ingo Weinzierl |
Improved bounds validation for distance only states.
|
| Wed, 21 Sep 2011 14:28:39 +0000 |
Felix Wolfsteller |
Added WaterlevelArtifact and respective infrastructure.
|
| Wed, 21 Sep 2011 14:01:14 +0000 |
Felix Wolfsteller |
Cosmetics, docs.
|
| Wed, 21 Sep 2011 13:53:09 +0000 |
Felix Wolfsteller |
Let WDifferencesCurveGenerator process LONGITUDINAL_W facets.
|
| Wed, 21 Sep 2011 13:49:50 +0000 |
Felix Wolfsteller |
Preparations for ability to display multiple differences in one plot.
|
| Wed, 21 Sep 2011 13:03:54 +0000 |
Ingo Weinzierl |
#315 Added new state for entering a kilometer range without step width.
|
| Wed, 21 Sep 2011 13:01:25 +0000 |
Felix Wolfsteller |
Cosmetics.
|
| Wed, 21 Sep 2011 12:55:36 +0000 |
Felix Wolfsteller |
Guard access to dataset to avoid NullPointerException.
|
| Wed, 21 Sep 2011 10:08:47 +0000 |
Ingo Weinzierl |
#325 Create human readable label for the selected DEM (used in the static UI part).
|
| Mon, 19 Sep 2011 18:46:44 +0000 |
Ingo Weinzierl |
Tagged RELEASE 2.5 of flys-artifacts.
|
| Mon, 19 Sep 2011 14:36:51 +0000 |
Bjoern Schilberg |
Adjust wms saar styling in the flys karten-archive styling.
|
| Mon, 19 Sep 2011 12:44:51 +0000 |
Ingo Weinzierl |
Cleanup imports.
|
| Fri, 16 Sep 2011 14:57:14 +0000 |
Ingo Weinzierl |
Use DGM Id in FLYSArtifact's data pool to query DGMs for floodmaps instead of querying DGMs by given range values.
|
| Fri, 16 Sep 2011 13:26:08 +0000 |
Ingo Weinzierl |
Added a DEM section to the floodmap section in the datacage configuration.
|
| Fri, 16 Sep 2011 11:37:43 +0000 |
Felix Wolfsteller |
Fix build.
|
| Fri, 16 Sep 2011 11:30:50 +0000 |
Felix Wolfsteller |
Load given artifacts for w-diff calculation.
|
| Fri, 16 Sep 2011 10:49:04 +0000 |
Bjoern Schilberg |
Added inital mapserver configuration files.
|
| Fri, 16 Sep 2011 09:51:02 +0000 |
Ingo Weinzierl |
Repaired datacage configuration. The system specific stuff is also displayed if a user-id is given.
|
| Fri, 16 Sep 2011 08:47:09 +0000 |
Ingo Weinzierl |
Write the name of the selected waterlevels (used for the floodmap) into the static DESCRIBE.
|
| Fri, 16 Sep 2011 06:52:16 +0000 |
Ingo Weinzierl |
Added state label for waterlevel selection.
|
| Thu, 15 Sep 2011 15:36:05 +0000 |
Ingo Weinzierl |
Enabled the FloodMapState to fetch waterlevel data from external Artifact.
|
| Thu, 15 Sep 2011 15:10:04 +0000 |
Ingo Weinzierl |
Removed needness import from JSON library which is not part of FLYS yet.
|
| Thu, 15 Sep 2011 15:05:24 +0000 |
Ingo Weinzierl |
Introduced the possibility for States to transform/modify input before the data is added to FLYSArtifact.
|
| Thu, 15 Sep 2011 15:00:23 +0000 |
Ingo Weinzierl |
Prepared FLYSArtifactCollection to live without Artifacts.
|
| Thu, 15 Sep 2011 14:58:36 +0000 |
Ingo Weinzierl |
Improved FLYSUtils: fetch Artifacts from ArtifactDatabase properly.
|
| Thu, 15 Sep 2011 07:39:36 +0000 |
Felix Wolfsteller |
Extended WDifferences bracnh of WINFO to have calculation in dedicated,
|
| Wed, 14 Sep 2011 14:58:06 +0000 |
Ingo Weinzierl |
Prepared the winfo artifact for floodmap calculations (now selectable in the UI).
|
| Wed, 14 Sep 2011 10:04:19 +0000 |
Ingo Weinzierl |
Bugfix: merge facets for the Collection's attribute only if the new and old facet's name and owner artifact are equal.
|
| Wed, 14 Sep 2011 09:36:28 +0000 |
Felix Wolfsteller |
Partial fix flys/issue304 (3:Display ZeroBaseline).
|
| Wed, 14 Sep 2011 07:46:40 +0000 |
Felix Wolfsteller |
Fix flys/issue310 (crosssection theme).
|
| Tue, 13 Sep 2011 07:47:56 +0000 |
Ingo Weinzierl |
Add an error message to the calculation report if an error occured while WSPLGENJob creation.
|
| Tue, 13 Sep 2011 06:30:10 +0000 |
Felix Wolfsteller |
Fix crash when StickyAxisAnnotation should be drawn without proper axis
|
| Tue, 13 Sep 2011 05:25:09 +0000 |
Ingo Weinzierl |
Improved styling (mapserver style) of WSPLGEN result shape.
|
| Mon, 12 Sep 2011 13:03:27 +0000 |
Ingo Weinzierl |
Add status message for queued WSPLGEN jobs to notify users.
|
| Mon, 12 Sep 2011 11:40:04 +0000 |
Ingo Weinzierl |
Do only create WSPLGEN and barrier facets if the WSPLGEN job has been added to the Scheduler and if there are digitized geometries existing.
|
| Mon, 12 Sep 2011 11:30:19 +0000 |
Felix Wolfsteller |
Fix build, added new DataUtil.
|
| Mon, 12 Sep 2011 11:26:32 +0000 |
Felix Wolfsteller |
Cosmetics.
|
| Mon, 12 Sep 2011 09:06:05 +0000 |
Felix Wolfsteller |
Added CSV Exporter for WDifferences.
|
| Mon, 12 Sep 2011 09:00:08 +0000 |
Felix Wolfsteller |
Cosmetics
|
| Mon, 12 Sep 2011 06:23:48 +0000 |
Ingo Weinzierl |
Suppress the GeoJSON string for the FloodMap creation to be included in the static DESCRIBE part.
|
| Mon, 12 Sep 2011 04:20:48 +0000 |
Ingo Weinzierl |
Removed needless imports.
|
| Fri, 09 Sep 2011 15:03:00 +0000 |
Ingo Weinzierl |
Write status messages and progress information of WSPLGEN Calculations into Artifact's DESCRIBE document.
|
| Fri, 09 Sep 2011 13:26:28 +0000 |
Felix Wolfsteller |
Fix flys/issue280 (boundingboxes of annotation).
|
| Fri, 09 Sep 2011 13:02:23 +0000 |
Felix Wolfsteller |
Fix flys/issue279 .
|
| Fri, 09 Sep 2011 12:37:52 +0000 |
Felix Wolfsteller |
Fix ArrayIndexOutOfBounds in certain cases.
|
| Fri, 09 Sep 2011 12:29:28 +0000 |
Felix Wolfsteller |
Fix facet name and legend of w-differences, walk over distance state, too.
|
| Fri, 09 Sep 2011 10:13:22 +0000 |
Felix Wolfsteller |
Added configuration to kick-in w-differences branch of winfo.
|
| Fri, 09 Sep 2011 10:07:14 +0000 |
Felix Wolfsteller |
Added very stubby WDifferences State/OutGenerator for WINFOArtifact.
|
| Fri, 09 Sep 2011 10:01:09 +0000 |
Felix Wolfsteller |
Implement getArtifact(uuid,context) in FLYSUtils.
|
| Thu, 08 Sep 2011 14:42:36 +0000 |
Ingo Weinzierl |
Added an Output target for WSPLGEN reports that will be available when an WSPLGEN calculation is finished.
|
| Thu, 08 Sep 2011 11:29:04 +0000 |
Felix Wolfsteller |
Cosmetics.
|
| Thu, 08 Sep 2011 11:24:27 +0000 |
Ingo Weinzierl |
Added a 'ProblemObserver' that analyses WSPLGEN's error stream for errors and warnings.
|
| Thu, 08 Sep 2011 11:22:35 +0000 |
Felix Wolfsteller |
Added translation of w_differences.
|
| Wed, 07 Sep 2011 13:56:10 +0000 |
Ingo Weinzierl |
Append an attribute 'background-processing' (can be 'true' or 'false') to the WINFOArtifact's DESCRIBE document.
|
| Wed, 07 Sep 2011 13:54:18 +0000 |
Ingo Weinzierl |
Set the river extent for WMSLayers in the FloodMapState.
|
| Wed, 07 Sep 2011 11:50:10 +0000 |
Felix Wolfsteller |
Added Themes for CrossSection diagrams.
|
| Wed, 07 Sep 2011 10:51:54 +0000 |
Felix Wolfsteller |
Display real km of shown data in crosssection-diagram.
|
| Wed, 07 Sep 2011 10:37:14 +0000 |
Felix Wolfsteller |
Fix various issues like i18n in cross section diagrams.
|
| Wed, 07 Sep 2011 09:24:32 +0000 |
Felix Wolfsteller |
Fix waterline in crosssection diagram.
|
| Wed, 07 Sep 2011 07:48:03 +0000 |
Felix Wolfsteller |
Fix profile loading of cross section diagram.
|
| Wed, 07 Sep 2011 07:37:22 +0000 |
Felix Wolfsteller |
Minor cosmetics
|
| Wed, 07 Sep 2011 07:28:52 +0000 |
Felix Wolfsteller |
Cosmetics, docs.
|
| Tue, 06 Sep 2011 17:41:07 +0000 |
Ingo Weinzierl |
Added a fallback mechanism to style mapserver layers as long as the theme mechanism is not implemented for maps (as it is for charts).
|
| Tue, 06 Sep 2011 15:25:54 +0000 |
Ingo Weinzierl |
Read barrier layers from filesystem while mapfile creation and build a facet for this layer in the artifact.
|
| Tue, 06 Sep 2011 11:10:13 +0000 |
Raimund Renkert |
Added driver to database configuration for use with postgresql.
|
| Tue, 06 Sep 2011 10:34:49 +0000 |
Ingo Weinzierl |
Little mapfile template improvement.
|
| Mon, 05 Sep 2011 16:08:19 +0000 |
Ingo Weinzierl |
Create WMSLayerFacets for the WSPLGEN results after we have started a WSPLGEN job.
|
| Mon, 05 Sep 2011 15:29:11 +0000 |
Ingo Weinzierl |
Trigger the mapfile creation after WSPLGEN jobs have finished.
|
| Mon, 05 Sep 2011 14:04:03 +0000 |
Ingo Weinzierl |
Introduced a MapfileGenerator that creates Mapserver specific mapfiles based on WSPLGEN results read from filesystem.
|
| Mon, 05 Sep 2011 07:17:52 +0000 |
Ingo Weinzierl |
Some bugfixes when starting/finishing WSPLGEN jobs.
|
| Fri, 02 Sep 2011 13:12:05 +0000 |
Ingo Weinzierl |
Added infrastructure to start WSPLGEN calculations - the FloodMapState already start such calculations.
|
| Fri, 02 Sep 2011 12:57:08 +0000 |
Felix Wolfsteller |
Add CrossSectionInfoGenerator.
|
| Thu, 01 Sep 2011 13:00:36 +0000 |
Felix Wolfsteller |
Cleanups of CrossSection*.
|
| Thu, 01 Sep 2011 12:47:01 +0000 |
Ingo Weinzierl |
Set the 'typ' attribute of lines and polygons in barrier shapefiles while shapefile creation.
|
| Thu, 01 Sep 2011 12:23:23 +0000 |
Ingo Weinzierl |
Set the Z values of line and polygon barrier geometries used for WSPLGEN.
|
| Thu, 01 Sep 2011 12:15:46 +0000 |
Felix Wolfsteller |
Get real (but yet not parameterized) data to display in CrossSection.
|
| Thu, 01 Sep 2011 07:27:44 +0000 |
Ingo Weinzierl |
Close open shapefile transactions properly.
|
| Thu, 01 Sep 2011 07:06:14 +0000 |
Ingo Weinzierl |
Renamed WSPLGEN required waterlevels file to 'waterlevel.wst'.
|
| Thu, 01 Sep 2011 07:04:01 +0000 |
Ingo Weinzierl |
Write additional attributes ELEVATION and KILOMETER into crosssection track shapefiles.
|
| Wed, 31 Aug 2011 13:19:29 +0000 |
Ingo Weinzierl |
Write WSP file for WSPLGEN and add its filepath to the WSPLGEN job.
|
| Wed, 31 Aug 2011 12:44:07 +0000 |
Ingo Weinzierl |
Reordered some parameters in a FLYSArtifact method.
|
| Wed, 31 Aug 2011 12:23:05 +0000 |
Felix Wolfsteller |
Improved stub for CrossSections (including Factory and Facet).
|
| Wed, 31 Aug 2011 12:20:23 +0000 |
Felix Wolfsteller |
Cosmetics.
|
| Wed, 31 Aug 2011 10:43:21 +0000 |
Felix Wolfsteller |
Removed stray character.
|
| Wed, 31 Aug 2011 10:41:16 +0000 |
Felix Wolfsteller |
Cosmetics.
|
| Wed, 31 Aug 2011 10:34:45 +0000 |
Felix Wolfsteller |
Fix translations of Main Values Facets.
|
| Wed, 31 Aug 2011 10:24:49 +0000 |
Felix Wolfsteller |
Added dummy sceleton for Cross Sections.
|
| Wed, 31 Aug 2011 08:53:30 +0000 |
Ingo Weinzierl |
Export floodplain to shapefile and add its file path to WSPLGEN job.
|
| Wed, 31 Aug 2011 07:50:01 +0000 |
Ingo Weinzierl |
Write file path of DMGs into the WSPLGEN job while preparing WSPLGEN.
|
| Tue, 30 Aug 2011 15:17:43 +0000 |
Ingo Weinzierl |
Export riveraxis and crosssections to shapefiles for WSPLGEN.
|
| Tue, 30 Aug 2011 14:13:06 +0000 |
Ingo Weinzierl |
Use the correct SRID while reading GeoJSON barriers and writing line/polygon shapefiles.
|
| Tue, 30 Aug 2011 11:09:54 +0000 |
Ingo Weinzierl |
Write user defined barriers into a shapefile that is placed in the Artifact's directory.
|
| Tue, 30 Aug 2011 08:09:52 +0000 |
Ingo Weinzierl |
Moved code to extract the river srid defined in the global configuration into FLYSUtils.
|
| Mon, 29 Aug 2011 09:26:56 +0000 |
Felix Wolfsteller |
Use FLYSUtils.getRiver instead of WINFOArtifact.getRiver.
|
| Mon, 29 Aug 2011 09:26:07 +0000 |
Felix Wolfsteller |
Use FLYSUtils.getRiver instead of WINFOArtifact.getRiver.
|
| Mon, 29 Aug 2011 09:11:15 +0000 |
Felix Wolfsteller |
Commit accidentally omitted result of refactoring (WINFO/FLYSUtils/getRiver).
|
| Mon, 29 Aug 2011 09:07:55 +0000 |
Felix Wolfsteller |
Interpolate Q main values, generate interpolated W main values on the fly from
|
| Mon, 29 Aug 2011 09:04:48 +0000 |
Felix Wolfsteller |
Use new helper class FLYSUtils, minor refactorization.
|
| Mon, 29 Aug 2011 09:01:40 +0000 |
Felix Wolfsteller |
Refactored to use new FLYSUtils, moved getRiver-functionality inside.
|
| Mon, 29 Aug 2011 08:58:03 +0000 |
Felix Wolfsteller |
Minor cosmetics.
|
| Fri, 26 Aug 2011 15:32:58 +0000 |
Sascha L. Teichmann |
Made it Oracle compatible
|
| Fri, 26 Aug 2011 15:01:20 +0000 |
Ingo Weinzierl |
Set some WSPLGENJob parameters which are stored in FLYSArtifact in the Floodmap state.
|
| Fri, 26 Aug 2011 14:58:35 +0000 |
Ingo Weinzierl |
Refactored the code to fetch the km range/locations into a utility class.
|
| Fri, 26 Aug 2011 14:55:18 +0000 |
Ingo Weinzierl |
Added a new method to FLYSArtifact to destroy a single state (call its endOfLife).
|
| Fri, 26 Aug 2011 12:45:32 +0000 |
Felix Wolfsteller |
Cosmetics.
|
| Fri, 26 Aug 2011 12:44:12 +0000 |
Felix Wolfsteller |
Added limited themeing-support for MainValues.
|
| Fri, 26 Aug 2011 12:42:12 +0000 |
Ingo Weinzierl |
Prepare directories for WSPLGEN specific data in FloodMap state and remove those directories when State.endOfLife() is called.
|
| Fri, 26 Aug 2011 12:40:11 +0000 |
Felix Wolfsteller |
New theme-related utilities.
|
| Fri, 26 Aug 2011 11:15:24 +0000 |
Felix Wolfsteller |
Improved mainvalues rendering.
|
| Fri, 26 Aug 2011 11:11:46 +0000 |
Felix Wolfsteller |
Recommend MainValues for Computed discharge curves.
|
| Fri, 26 Aug 2011 11:10:31 +0000 |
Felix Wolfsteller |
New NamedDouble class which implements a <String,double>-pair.
|
| Fri, 26 Aug 2011 08:53:37 +0000 |
Ingo Weinzierl |
Call State.endOfLife() for all States in the Artifact when Artifact.endOfLife() is called.
|
| Fri, 26 Aug 2011 08:49:18 +0000 |
Felix Wolfsteller |
Plot "real" (respecting parameters) W and Q MainValues, yet in wrong scale.
|
| Fri, 26 Aug 2011 08:07:47 +0000 |
Ingo Weinzierl |
Call State.endOfLife() in FLYSArtifact when stepping back to a previous state.
|
| Thu, 25 Aug 2011 10:53:25 +0000 |
Felix Wolfsteller |
Enable plotting of some annotations that look like MainValues.
|
| Thu, 25 Aug 2011 10:50:30 +0000 |
Felix Wolfsteller |
Prepare StickyAxisAnnotation implementation to handle annotations at 'y' (vertical) axis.
|
| Thu, 25 Aug 2011 10:47:55 +0000 |
Felix Wolfsteller |
Minor cosmetics.
|
| Thu, 25 Aug 2011 10:45:12 +0000 |
Felix Wolfsteller |
Added MainValue-Fetching-Capabilities to MainValuesArtifact.
|
| Thu, 25 Aug 2011 10:42:23 +0000 |
Felix Wolfsteller |
Improved implementation of MainValueArtifact#MainValueFacet .
|
| Thu, 25 Aug 2011 10:38:45 +0000 |
Felix Wolfsteller |
Changed state spawning mechanism of MainValuesArtifact.
|
| Thu, 25 Aug 2011 10:34:20 +0000 |
Felix Wolfsteller |
Minor cosmetics and docs.
|
| Thu, 25 Aug 2011 10:29:14 +0000 |
Felix Wolfsteller |
Added new Mainvalues FacetType.
|
| Wed, 24 Aug 2011 14:35:38 +0000 |
Ingo Weinzierl |
Changed the way of collecting the data for the RiverAxisArtifact - use the database instead of a Master-Artifact.
|
| Wed, 24 Aug 2011 14:30:27 +0000 |
Ingo Weinzierl |
Removed needless imports.
|
| Wed, 24 Aug 2011 12:12:44 +0000 |
Felix Wolfsteller |
Added conf for factory and rule for MainValueArtifacts, missing ChangeLog entry.
|
| Wed, 24 Aug 2011 11:40:09 +0000 |
Felix Wolfsteller |
Fix dates in ChangeLog.
|
| Wed, 24 Aug 2011 11:38:30 +0000 |
Felix Wolfsteller |
Smaller Cosmetics.
|
| Wed, 24 Aug 2011 10:53:01 +0000 |
Sascha L. Teichmann |
Datacage: Use 'ids' in user specific part, too.
|
| Wed, 24 Aug 2011 10:32:46 +0000 |
Sascha L. Teichmann |
Datacage template: s/db-ids/ids/g
|
| Wed, 24 Aug 2011 09:44:31 +0000 |
Felix Wolfsteller |
Refactored (state access) to ease future development of more trivial artifacts.
|
| Wed, 24 Aug 2011 08:53:11 +0000 |
Ingo Weinzierl |
The WMS background's facet will now also have a SRID set.
|
| Wed, 24 Aug 2011 08:42:31 +0000 |
Felix Wolfsteller |
Minor changes to stub MainValuesArtifact.
|
| Wed, 24 Aug 2011 08:22:09 +0000 |
Ingo Weinzierl |
Moved the input of user defined barriers for the floodmap to an earlier state.
|
| Wed, 24 Aug 2011 07:51:12 +0000 |
Ingo Weinzierl |
Repaired xpath expressions for wms srid and background layers that broke after the floodmap config structure changed.
|
| Tue, 23 Aug 2011 15:32:33 +0000 |
Ingo Weinzierl |
Repaired broken river wms initialization.
|
| Tue, 23 Aug 2011 13:17:21 +0000 |
Sascha L. Teichmann |
Made facets cloneable with the right type.
|
| Tue, 23 Aug 2011 13:05:54 +0000 |
Ingo Weinzierl |
Set the master artifact while output creation.
|
| Tue, 23 Aug 2011 11:07:21 +0000 |
Sascha L. Teichmann |
Made FLYS artifacts cloneable.
|
| Tue, 23 Aug 2011 07:53:41 +0000 |
Ingo Weinzierl |
Implemented a MapInfo service that returns some basic information to create maps for specific rivers.
|
| Mon, 22 Aug 2011 16:37:12 +0000 |
Sascha L. Teichmann |
Build out/facet filter from XML document passed at creation time.
|
| Mon, 22 Aug 2011 16:05:40 +0000 |
Sascha L. Teichmann |
Added optional positive filter for outs and facets.
|
| Mon, 22 Aug 2011 15:25:48 +0000 |
Sascha L. Teichmann |
Moved WINFO specific stuff from FLYS into WINFO artifact.
|
| Mon, 22 Aug 2011 13:07:26 +0000 |
Sascha L. Teichmann |
Datacage: filter by out in user specific part
|
| Mon, 22 Aug 2011 10:40:15 +0000 |
Ingo Weinzierl |
Prepared the FloodMapState to save geometries.
|
| Fri, 19 Aug 2011 15:52:03 +0000 |
Ingo Weinzierl |
The boundary (extent) for the river axis is determined based on its geometry - this extent is written into the wms facet.
|
| Fri, 19 Aug 2011 14:13:51 +0000 |
Sascha L. Teichmann |
Removed superfluous imports.
|
| Fri, 19 Aug 2011 14:10:18 +0000 |
Sascha L. Teichmann |
State engine: Removed CallContext from state validation.
|
| Fri, 19 Aug 2011 11:46:40 +0000 |
Felix Wolfsteller |
Added lacalization of "Streckenfavoriten".
|
| Fri, 19 Aug 2011 11:28:50 +0000 |
Felix Wolfsteller |
Picky white-space cosmetics.
|
| Fri, 19 Aug 2011 10:17:08 +0000 |
Felix Wolfsteller |
Added stub implementation of new MainValuesArtifact.
|
| Fri, 19 Aug 2011 09:48:13 +0000 |
Sascha L. Teichmann |
Fixed flys/issue262: Unified user and system datacage template
|
| Thu, 18 Aug 2011 14:58:17 +0000 |
Sascha L. Teichmann |
flys/issue260: Datacage uses master_artifacts view now.
|
| Thu, 18 Aug 2011 14:19:30 +0000 |
Sascha L. Teichmann |
Datacage: Added view to schema to select master artifacts.
|
| Thu, 18 Aug 2011 14:13:35 +0000 |
Sascha L. Teichmann |
Datacage user template: Removed state filter because it was broken. Simplified by joining two contexts.
|
| Thu, 18 Aug 2011 14:09:54 +0000 |
Felix Wolfsteller |
Fix rendering of Annotations/lines under certain zooming conditions, ChangeLog.
|
| Wed, 17 Aug 2011 13:05:15 +0000 |
Felix Wolfsteller |
Moved StickyAxisAnnotation into new package de.intevation.flys.jfree .
|
| Wed, 17 Aug 2011 12:53:55 +0000 |
Felix Wolfsteller |
Extracted and renamed CustomAnnotation to StickyAxisAnnotation. Also removed
|
| Wed, 17 Aug 2011 12:32:26 +0000 |
Felix Wolfsteller |
Improved CustomAnnotation rendering.
|
| Wed, 17 Aug 2011 09:16:20 +0000 |
Felix Wolfsteller |
Added proof-of-concept collision detection for text annotations.
|
| Tue, 16 Aug 2011 13:24:50 +0000 |
Felix Wolfsteller |
Started implementation of CustomAnnotation to plot collision-free annotations.
|
| Tue, 16 Aug 2011 11:43:47 +0000 |
Felix Wolfsteller |
Slightly improved rendering of annotations in LongitudinalSection-plots.
|
| Mon, 15 Aug 2011 10:56:58 +0000 |
Sascha L. Teichmann |
Fix for flys/issue191
|
| Fri, 12 Aug 2011 12:54:19 +0000 |
Felix Wolfsteller |
Let AnnotationArtifact fetch "more correct" data.
|
| Fri, 12 Aug 2011 12:39:44 +0000 |
Felix Wolfsteller |
Added functionality to query range and point-annotations only to
|
| Thu, 11 Aug 2011 15:08:24 +0000 |
Sascha L. Teichmann |
Datacage: Added a development mode for recommendations
|
| Thu, 11 Aug 2011 13:03:41 +0000 |
Felix Wolfsteller |
Picky Cosmetics.
|
| Thu, 11 Aug 2011 12:48:31 +0000 |
Felix Wolfsteller |
Made (kind of dummy-) Annotations in LongitudinalSection diagrams visible.
|
| Thu, 11 Aug 2011 12:43:00 +0000 |
Felix Wolfsteller |
Added configuration for AnnotationArtifacts.
|
| Thu, 11 Aug 2011 12:24:31 +0000 |
Felix Wolfsteller |
Added initial version of AnnotationArtifact and friends.
|
| Wed, 10 Aug 2011 14:57:12 +0000 |
Sascha L. Teichmann |
Datacage: Extended schema for artifacts and collections
|
| Wed, 10 Aug 2011 10:08:01 +0000 |
Sascha L. Teichmann |
Datacage: Templates now can nest <dc:elements> into other elements in the body of <dc:context>
|
| Wed, 10 Aug 2011 08:43:38 +0000 |
Sascha L. Teichmann |
Datacage: Fixed caching issue leading to incorrect results.
|
| Tue, 09 Aug 2011 10:25:45 +0000 |
Sascha L. Teichmann |
Added <old_calculations> element
|
| Tue, 09 Aug 2011 10:23:04 +0000 |
Sascha L. Teichmann |
Cosmetic: Replaced usage of legacy java.util.Stack with java.util.Deque.
|
| Thu, 04 Aug 2011 15:32:10 +0000 |
Sascha L. Teichmann |
Datacage: use more compatible casts to UUIDs
|
| Thu, 04 Aug 2011 15:05:02 +0000 |
Sascha L. Teichmann |
Datacage: added first user specific config for cross sections.
|
| Thu, 04 Aug 2011 10:58:00 +0000 |
Sascha L. Teichmann |
Added a <dc:comment> tag to place comments in the meta data templates.
|
| Thu, 04 Aug 2011 10:24:23 +0000 |
Sascha L. Teichmann |
Meta data service: Be a bit more tolerant about empty strings for UUIDs of artifact and user.
|
| Wed, 03 Aug 2011 16:40:04 +0000 |
Sascha L. Teichmann |
Bring user specific meta data service to life.
|
| Wed, 03 Aug 2011 11:23:13 +0000 |
Felix Wolfsteller |
Minor cosmetics (comments).
|
| Wed, 03 Aug 2011 11:20:07 +0000 |
Felix Wolfsteller |
Minor cosmetics, (comments).
|
| Wed, 03 Aug 2011 08:25:28 +0000 |
Sascha L. Teichmann |
Fixed potential NPE in collection monitor
|
| Tue, 02 Aug 2011 22:16:16 +0000 |
Sascha L. Teichmann |
Added support for more than one db connection in datacage templating.
|
| Tue, 02 Aug 2011 16:36:22 +0000 |
Sascha L. Teichmann |
Datacage: Forgot to fetch dialect dependent SQL statement for deleting artifacts by uuid.
|
| Tue, 02 Aug 2011 14:09:01 +0000 |
Sascha L. Teichmann |
Datacage: Set the name of the collections at initial scan, too.
|
| Tue, 02 Aug 2011 13:40:04 +0000 |
Sascha L. Teichmann |
Datacage: fixed wrong SQL references
|
| Tue, 02 Aug 2011 13:03:06 +0000 |
Sascha L. Teichmann |
Datacage: Fixed two NPEs
|
| Tue, 02 Aug 2011 11:38:20 +0000 |
Sascha L. Teichmann |
Forwarded kill collections and artifacts events to datacage.
|
| Tue, 02 Aug 2011 11:20:18 +0000 |
Sascha L. Teichmann |
The signature of BackendListener in artifactdatabase has changed.
|
| Mon, 01 Aug 2011 20:35:43 +0000 |
Sascha L. Teichmann |
Datacage: completed backend listener stuff.
|
| Mon, 01 Aug 2011 16:53:54 +0000 |
Sascha L. Teichmann |
Datacage: Update collection names on change. Remove artifacts from collections.
|
| Mon, 01 Aug 2011 16:34:48 +0000 |
Sascha L. Teichmann |
Datacage: Pass global context to datacage if calls come from backend listener.
|
| Mon, 01 Aug 2011 15:58:37 +0000 |
Sascha L. Teichmann |
Fixed recursion bug.
|
| Mon, 01 Aug 2011 15:41:10 +0000 |
Sascha L. Teichmann |
Added some debug output
|
| Mon, 01 Aug 2011 14:58:15 +0000 |
Sascha L. Teichmann |
Wire datacage with backend of artifact database.
|
| Mon, 01 Aug 2011 08:31:09 +0000 |
Sascha L. Teichmann |
Datacage: Moved templating in a better suited package.
|
| Mon, 01 Aug 2011 08:11:12 +0000 |
Sascha L. Teichmann |
For doc purposes add section with db config in config.xml
|
| Sun, 31 Jul 2011 19:47:41 +0000 |
Sascha L. Teichmann |
Datacage: delete artifacts at initial scan, too. Fixed problem with writing content of state data.
|
| Sun, 31 Jul 2011 19:07:02 +0000 |
Sascha L. Teichmann |
Added kludge for the null type information of artifact data.
|
| Sun, 31 Jul 2011 17:30:29 +0000 |
Sascha L. Teichmann |
Fixed default connection URL to use a namend in-mermory database.
|
| Sun, 31 Jul 2011 16:49:48 +0000 |
Sascha L. Teichmann |
Fixed datacage db scheme. add some debug output.
|
| Fri, 29 Jul 2011 13:29:29 +0000 |
Sascha L. Teichmann |
Datacage: Store
|
| Fri, 29 Jul 2011 11:24:41 +0000 |
Sascha L. Teichmann |
Store outs of artifacts into datacage db at initial scan.
|
| Fri, 29 Jul 2011 08:40:11 +0000 |
Sascha L. Teichmann |
Add artifacts data into datacage db at initial scan.
|
| Fri, 29 Jul 2011 07:56:28 +0000 |
Sascha L. Teichmann |
Add artifacts into datacage db at initial scan.
|
| Thu, 28 Jul 2011 15:59:38 +0000 |
Sascha L. Teichmann |
Datacage: Add collection items at initial scan.
|
| Thu, 28 Jul 2011 15:34:26 +0000 |
Sascha L. Teichmann |
Datacage: Add collections at initial scan.
|
| Thu, 28 Jul 2011 15:07:20 +0000 |
Sascha L. Teichmann |
Datacage: Add users at initial scan.
|
| Thu, 28 Jul 2011 14:38:51 +0000 |
Sascha L. Teichmann |
Datacage SQL schema: Using sequences for id generation now
|
| Thu, 28 Jul 2011 14:26:01 +0000 |
Sascha L. Teichmann |
Datacage: clear database before initial scan
|
| Thu, 28 Jul 2011 13:32:27 +0000 |
Sascha L. Teichmann |
Ajusted datacage to use the SQL infrastructure from the artifact database.
|
| Wed, 27 Jul 2011 14:04:03 +0000 |
Sascha L. Teichmann |
Added the datacage as lifetime listener to the artifact database to create the initial index.
|
| Wed, 27 Jul 2011 11:01:55 +0000 |
Sascha L. Teichmann |
datacage: prepared access to outs of artifacts.
|
| Wed, 27 Jul 2011 08:20:55 +0000 |
Sascha L. Teichmann |
Datacage: Added ON DELETE CASCADE constraints in schema.
|
| Tue, 26 Jul 2011 14:14:55 +0000 |
Sascha L. Teichmann |
Added schema for datacage db
|
| Tue, 26 Jul 2011 09:50:58 +0000 |
Sascha L. Teichmann |
Removed Hello-World-App
|
| Mon, 25 Jul 2011 14:55:43 +0000 |
Sascha L. Teichmann |
Made meta data service thread safe.
|
| Mon, 25 Jul 2011 14:12:14 +0000 |
Sascha L. Teichmann |
Improved XPath handling for absent flags.
|
| Mon, 25 Jul 2011 12:56:53 +0000 |
Sascha L. Teichmann |
meta data service: Added 'if log.isDebugEnabled() {}'
|
| Mon, 25 Jul 2011 11:05:33 +0000 |
Sascha L. Teichmann |
meta data service: made artifact optional and allow passing extra parameters.
|
| Sat, 23 Jul 2011 18:47:08 +0000 |
Sascha L. Teichmann |
Reuse the compiled statements in meta data service.
|
| Fri, 22 Jul 2011 16:55:36 +0000 |
Sascha L. Teichmann |
Added caching support for the static part of the datacage.
|
| Fri, 22 Jul 2011 11:18:00 +0000 |
Ingo Weinzierl |
Prepared the FLYSArtifactCollection to support the storage of already loaded recommendations.
|
| Fri, 22 Jul 2011 10:41:30 +0000 |
Sascha L. Teichmann |
meta data service: Adjusted to use the DataCage recommendations.
|
| Fri, 22 Jul 2011 09:10:31 +0000 |
Sascha L. Teichmann |
Meta data template: Allow '-' in variable names.
|
| Thu, 21 Jul 2011 15:13:07 +0000 |
Ingo Weinzierl |
Added missing river_id for the datacage factory node of the wmsbackground layer.
|
| Thu, 21 Jul 2011 15:07:38 +0000 |
Ingo Weinzierl |
Added the river_id to the datacage nodes for riveraxis and wms background layer.
|
| Thu, 21 Jul 2011 14:43:19 +0000 |
Sascha L. Teichmann |
Adjusted services to implement changed signature.
|
| Thu, 21 Jul 2011 14:00:09 +0000 |
Ingo Weinzierl |
Modified the CollectionMonitor to recommend artifacts for the current state's outputs only.
|
| Thu, 21 Jul 2011 10:45:52 +0000 |
Ingo Weinzierl |
Modified the CollectionMonitor (for recommended artifacts) to use the DataCage.
|
| Wed, 20 Jul 2011 22:03:50 +0000 |
Sascha L. Teichmann |
Datacage: recommendation mechanism now accepts nodes to append results.
|
| Wed, 20 Jul 2011 20:51:13 +0000 |
Sascha L. Teichmann |
Datacage template: Added a macro mechanism.
|
| Wed, 20 Jul 2011 20:13:49 +0000 |
Sascha L. Teichmann |
Datacage template: Added a new 'if' construct similiar to XSLT
|
| Wed, 20 Jul 2011 17:03:00 +0000 |
Sascha L. Teichmann |
DataCage: Added a recommend() method to generate recommendations for
|
| Wed, 20 Jul 2011 16:28:49 +0000 |
Sascha L. Teichmann |
Datacage: Added custom provider for XPath functions.
|
| Wed, 20 Jul 2011 15:06:16 +0000 |
Ingo Weinzierl |
Added configurations for river WMSe (currently for Saar, Mosel, Elbe).
|
| Wed, 20 Jul 2011 14:59:25 +0000 |
Sascha L. Teichmann |
Meta data template: Added new choose/when/otherwise construct similiar to XSLT
|
| Wed, 20 Jul 2011 14:01:38 +0000 |
Ingo Weinzierl |
Made the background layer in floodmaps configurable.
|
| Wed, 20 Jul 2011 13:21:16 +0000 |
Ingo Weinzierl |
Removed the extent of the background layer facet.
|
| Wed, 20 Jul 2011 12:42:06 +0000 |
Ingo Weinzierl |
Set the extent of created WMSLayerFacets.
|
| Wed, 20 Jul 2011 12:37:54 +0000 |
Ingo Weinzierl |
WMSLayerFacets can have an extent now.
|
| Wed, 20 Jul 2011 12:34:20 +0000 |
Ingo Weinzierl |
Adapted the method of FLYSArtifact.setup() which has been changed in the artifact package.
|
| Wed, 20 Jul 2011 10:39:27 +0000 |
Sascha L. Teichmann |
Added standalone app to debug the datacage template.
|
| Wed, 20 Jul 2011 09:56:39 +0000 |
Sascha L. Teichmann |
First step to factor out the "Datenkorb" logic into a service independent singleton.
|
| Wed, 20 Jul 2011 07:08:10 +0000 |
Ingo Weinzierl |
Removed a duplicated property in ManagedFacets.
|
| Tue, 19 Jul 2011 17:01:10 +0000 |
Sascha L. Teichmann |
Improved error handling in loading meta data template.
|
| Tue, 19 Jul 2011 16:39:32 +0000 |
Sascha L. Teichmann |
Made meta data template configurable.
|
| Tue, 19 Jul 2011 16:14:52 +0000 |
Sascha L. Teichmann |
Meta data: Make database ids identifiable with unique name "db-id"
|
| Tue, 19 Jul 2011 10:37:57 +0000 |
Ingo Weinzierl |
Use the Facet.toXML() method to write facet elements into the DESCRIBE document of the Collection.
|
| Mon, 18 Jul 2011 17:09:00 +0000 |
Ingo Weinzierl |
Simplified the code to read all provided Outputs of an Artifact.
|
| Mon, 18 Jul 2011 15:07:47 +0000 |
Ingo Weinzierl |
The WMSLayerFacet now writes the WMS URL and layernames to its XML representation.
|
| Mon, 18 Jul 2011 10:13:25 +0000 |
Ingo Weinzierl |
Added artifacts/states for WMS background an river axis and a configuration for the output-defaults.
|
| Mon, 18 Jul 2011 09:20:42 +0000 |
Ingo Weinzierl |
Added a computeInit() method to intialize data/facets after creating new artifacts.
|
| Thu, 14 Jul 2011 15:30:55 +0000 |
Ingo Weinzierl |
Append artifact recommendations to the artifact's describe document.
|
| Thu, 14 Jul 2011 14:25:36 +0000 |
Ingo Weinzierl |
Adapted a method signature of FLYSContextFactory to apply the changes in the artifact database.
|
| Thu, 14 Jul 2011 14:11:29 +0000 |
Sascha L. Teichmann |
Debugged the water fill algorithm.
|
| Thu, 14 Jul 2011 11:27:01 +0000 |
Ingo Weinzierl |
Added a monitor that creates new artifacts for default themes in charts and maps.
|
| Wed, 13 Jul 2011 17:33:15 +0000 |
Sascha L. Teichmann |
Add Swing standalone app to test/develope cross sections directly from database.
|
| Wed, 13 Jul 2011 10:29:32 +0000 |
Ingo Weinzierl |
Introduced a new output 'floodmap' for the FloodMapState.
|
| Tue, 12 Jul 2011 08:05:54 +0000 |
Sascha L. Teichmann |
Fixed corner case.
|
| Mon, 11 Jul 2011 16:08:30 +0000 |
Sascha L. Teichmann |
Generate water level lines for given cross section.
|
| Fri, 08 Jul 2011 08:26:18 +0000 |
Ingo Weinzierl |
Artifacts and Collections now support the 'type' member of Outputs.
|
| Wed, 06 Jul 2011 13:41:36 +0000 |
Ingo Weinzierl |
Removed a type from transition model.
|
| Wed, 06 Jul 2011 13:37:52 +0000 |
Ingo Weinzierl |
The DataFacets are now able to store the ID of the create which created them.
|
| Wed, 06 Jul 2011 09:18:31 +0000 |
Ingo Weinzierl |
Facets created by the WaterlevelState store information about state's id and artifact's hash value now.
|
| Tue, 05 Jul 2011 17:28:57 +0000 |
Ingo Weinzierl |
Changed the desired UI provider for the WaterlevelGroundDifferences state.
|
| Tue, 05 Jul 2011 15:34:54 +0000 |
Ingo Weinzierl |
Enhanced the transition model to continue the parameterization in the waterlevel state to compute flood maps.
|
| Mon, 04 Jul 2011 13:23:54 +0000 |
Sascha L. Teichmann |
Fix(?) for flys/issue114
|
| Sun, 03 Jul 2011 15:33:33 +0000 |
Sascha L. Teichmann |
Added the math needed to calculate "W-Differenzen" in "Laengsschnitten"
|
| Fri, 01 Jul 2011 14:46:13 +0000 |
Ingo Weinzierl |
An initial implementation to render chart series based on the XML configuration in themes.xml.
|
| Fri, 01 Jul 2011 11:16:11 +0000 |
Ingo Weinzierl |
#135 Modified the way to store datasets for different chart axes.
|
| Fri, 01 Jul 2011 08:33:52 +0000 |
Ingo Weinzierl |
Added the option to call the distance info service with a filter to fetch locations or distances only.
|
| Thu, 30 Jun 2011 11:32:17 +0000 |
Ingo Weinzierl |
#159 Modifications in the transition model to support a state with a kilometer range input only.
|
| Wed, 29 Jun 2011 09:00:31 +0000 |
Sascha L. Teichmann |
Downgraded Trove to 1.1-beta-5
|
| Tue, 28 Jun 2011 15:21:02 +0000 |
Ingo Weinzierl |
Fixed the JBoss Maven repository.
|
| Tue, 28 Jun 2011 09:56:52 +0000 |
Ingo Weinzierl |
Tagged RELEASE 2.4 of flys-artifacts.
|
| Mon, 27 Jun 2011 16:07:24 +0000 |
Ingo Weinzierl |
The WST export contains the corrected W values now.
|
| Mon, 27 Jun 2011 14:06:16 +0000 |
Sascha L. Teichmann |
WQ: Guessing increaing w is not based on direct neighbors any more.
|
| Mon, 27 Jun 2011 13:58:03 +0000 |
Sascha L. Teichmann |
ATWriter: Fixed array size to construct spline with stricly increasing values.
|
| Mon, 27 Jun 2011 09:42:21 +0000 |
Sascha L. Teichmann |
Fix for flys/issue150: Invert the x axis if its guessed that water is increasing.
|
| Mon, 27 Jun 2011 09:17:41 +0000 |
Sascha L. Teichmann |
WQ: Added a method to guess is increasing.
|
| Mon, 27 Jun 2011 07:45:32 +0000 |
Ingo Weinzierl |
#177 Commented out the code that generates the series names in discharge curves. This code currently generates memory problems and stops the server accepting new http requests.
|
| Sun, 26 Jun 2011 17:18:59 +0000 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
| Sun, 26 Jun 2011 17:06:35 +0000 |
Sascha L. Teichmann |
Removed dead code.
|
| Sun, 26 Jun 2011 16:40:35 +0000 |
Sascha L. Teichmann |
Forgot to check in last ChangeLog change.
|
| Sun, 26 Jun 2011 16:19:02 +0000 |
Sascha L. Teichmann |
Fix for flys/issue173
|
| Sun, 26 Jun 2011 14:46:48 +0000 |
Sascha L. Teichmann |
Fix for flys/issue147
|
| Sun, 26 Jun 2011 13:07:44 +0000 |
Sascha L. Teichmann |
Fix for flys/issue86
|
| Sat, 25 Jun 2011 17:35:50 +0000 |
Sascha L. Teichmann |
Fixed "W am Pegel" calculations.
|
| Fri, 24 Jun 2011 12:05:13 +0000 |
Ingo Weinzierl |
#174 Longitudinal section charts will now have an upper margin again.
|
| Fri, 24 Jun 2011 09:49:27 +0000 |
Ingo Weinzierl |
#172 Charts of type duration curve will now have a lower X set to '0'.
|
| Thu, 23 Jun 2011 21:44:24 +0000 |
Sascha L. Teichmann |
ATWriter: Results are now in cm. Made it more robust against corner cases.
|
| Thu, 23 Jun 2011 17:22:17 +0000 |
Sascha L. Teichmann |
Added generation and configuration of AT facets.
|
| Thu, 23 Jun 2011 16:45:48 +0000 |
Sascha L. Teichmann |
Added exporter for AT facets.
|
| Thu, 23 Jun 2011 15:50:44 +0000 |
Sascha L. Teichmann |
New AT writer for results.
|
| Thu, 23 Jun 2011 13:42:47 +0000 |
Ingo Weinzierl |
#157 Both types of discharge curves will now include the '0' value on the x-axis.
|
| Thu, 23 Jun 2011 12:39:59 +0000 |
Sascha L. Teichmann |
WQDay is based on WQ now to make it exportable as AT.
|
| Thu, 23 Jun 2011 12:19:12 +0000 |
Sascha L. Teichmann |
Added base class WQ for WQKms.
|
| Thu, 23 Jun 2011 08:58:30 +0000 |
Sascha L. Teichmann |
Corrected configuration for error reports.
|
| Wed, 22 Jun 2011 14:47:22 +0000 |
Ingo Weinzierl |
#164 Create the items for the adapted WQ state with range information for W and Q.
|
| Wed, 22 Jun 2011 10:54:30 +0000 |
Sascha L. Teichmann |
"Abflusskurve am Pegel" looks correct again.
|
| Wed, 22 Jun 2011 10:36:27 +0000 |
Sascha L. Teichmann |
Improved situtation on rendering "Abflusskurve am Pegel". Not fully working, yet.
|
| Wed, 22 Jun 2011 09:19:16 +0000 |
Sascha L. Teichmann |
Generate facets for "Abflusskurven am Pegel". Not working by now. :-/
|
| Wed, 22 Jun 2011 06:51:36 +0000 |
Ingo Weinzierl |
#161 Include the 0 on the second y axis (the Q axis) in longitudinal section charts intially.
|
| Tue, 21 Jun 2011 21:41:49 +0000 |
Sascha L. Teichmann |
Draw correction curve again.
|
| Tue, 21 Jun 2011 18:10:49 +0000 |
Ingo Weinzierl |
#157 Computed discharge curve charts always have a lower bound set to 0.
|
| Tue, 21 Jun 2011 17:39:29 +0000 |
Ingo Weinzierl |
#90 Added a margin between chart data and chart axes to avoid displaying curves on the chart border.
|
| Tue, 21 Jun 2011 17:03:46 +0000 |
Sascha L. Teichmann |
Fix for flys/issue158
|
| Tue, 21 Jun 2011 16:31:19 +0000 |
Sascha L. Teichmann |
Fix for flys/issue154
|
| Tue, 21 Jun 2011 16:22:28 +0000 |
Sascha L. Teichmann |
Only generate 'outs' if they have facets.
|
| Tue, 21 Jun 2011 14:33:00 +0000 |
Ingo Weinzierl |
Put the time-to-live of the collection into its DESCRIBE document.
|
| Mon, 20 Jun 2011 14:36:42 +0000 |
Sascha L. Teichmann |
Configured states to generate report facets.
|
| Mon, 20 Jun 2011 14:14:20 +0000 |
Sascha L. Teichmann |
Generate report facets if there are problems with the calculations.
|
| Mon, 20 Jun 2011 13:47:59 +0000 |
Sascha L. Teichmann |
Added generator and facet for error reports.
|
| Mon, 20 Jun 2011 12:32:32 +0000 |
Sascha L. Teichmann |
New model to transport data and error reports of calculations.
|
| Sat, 18 Jun 2011 20:20:34 +0000 |
Sascha L. Teichmann |
Added calculation "am Pegel" version to the "Wasserspiegellage" calculation.
|
| Sat, 18 Jun 2011 18:19:34 +0000 |
Sascha L. Teichmann |
Removed dead code.
|
| Sat, 18 Jun 2011 17:03:17 +0000 |
Sascha L. Teichmann |
Only generate facets when needed.
|
| Fri, 17 Jun 2011 16:17:03 +0000 |
Sascha L. Teichmann |
Merged revisions 2127-2133,2136-2137,2140,2143-2144,2146,2150-2151,2153-2154 via svnmerge from
|
| Fri, 17 Jun 2011 13:00:54 +0000 |
Ingo Weinzierl |
Added a parameter 'wq_free' that determines that mode of calculation 1 (specifies if the calculation is bound to a gauge or not).
|
| Fri, 17 Jun 2011 12:38:41 +0000 |
Ingo Weinzierl |
DischargeLongitudinalSectionCurve will have corrected W facets now.
|
| Wed, 15 Jun 2011 15:28:54 +0000 |
Ingo Weinzierl |
Merged with trunk and introduced hashing of computed values.
facets-slt
|
| Tue, 14 Jun 2011 16:26:59 +0000 |
Sascha L. Teichmann |
DistanceInfoService: Got rid of namespace in result document.
|
| Tue, 14 Jun 2011 15:34:27 +0000 |
Ingo Weinzierl |
#77 The curves in a duration chart will have names now.
|
| Tue, 14 Jun 2011 13:54:19 +0000 |
Ingo Weinzierl |
The min/max W/Q ranges in the panel for calculation4 are written into the DESCRIBE.
|
| Tue, 14 Jun 2011 13:53:25 +0000 |
Sascha L. Teichmann |
Write top 'Oberkante' and bottom 'Unterkante' to out going XML if they exist.
|
| Tue, 14 Jun 2011 10:38:00 +0000 |
Ingo Weinzierl |
The state that is used to enter locations writes the river's range into the DESCRIBE now.
|
| Fri, 10 Jun 2011 15:59:47 +0000 |
Sascha L. Teichmann |
Added error reporting to 'Wasserspiegellage' calculation.
|
| Fri, 10 Jun 2011 14:24:15 +0000 |
Sascha L. Teichmann |
Added error reporting to 'Abflusskurve' calculation.
|
| Fri, 10 Jun 2011 12:38:08 +0000 |
Sascha L. Teichmann |
Added error reporting to 'Dauerzahlen' calculation.
|
| Fri, 10 Jun 2011 10:10:04 +0000 |
Sascha L. Teichmann |
Added methods to remove NaN values.
|
| Fri, 10 Jun 2011 09:19:27 +0000 |
Sascha L. Teichmann |
Added calculation base class to collect the problems during the calculations. Adjusted calculation 4 to use the mechanism.
|
| Thu, 09 Jun 2011 10:48:13 +0000 |
Ingo Weinzierl |
Changed the zoom process - the values in the chart request document are percentual values that apply to every axis.
|
| Thu, 09 Jun 2011 10:31:22 +0000 |
Ingo Weinzierl |
Corrected axes/datasets mappings.
|
| Wed, 08 Jun 2011 19:11:18 +0000 |
Sascha L. Teichmann |
Berechnung 4: Determine the gauges by their station position. This hopefully fixes segment assignment problems.
|
| Wed, 08 Jun 2011 18:50:40 +0000 |
Sascha L. Teichmann |
Berechnung 4: Added more debug output
|
| Wed, 08 Jun 2011 13:57:43 +0000 |
Ingo Weinzierl |
#103 PART 1: The numbers which are written into the static DESCRIBE part are i18n formatted now.
|
| Wed, 08 Jun 2011 13:32:56 +0000 |
Ingo Weinzierl |
#93 Changed the name of calculation type 4.
|
| Wed, 08 Jun 2011 13:03:21 +0000 |
Ingo Weinzierl |
Made the chart range determination more robust against NaN values.
|
| Wed, 08 Jun 2011 12:35:44 +0000 |
Ingo Weinzierl |
Set the second y axis to axis position 1 (starts at 0).
|
| Wed, 08 Jun 2011 10:25:39 +0000 |
Sascha L. Teichmann |
s@m³/s@m\\u00b3/s@
|
| Wed, 08 Jun 2011 10:21:36 +0000 |
Sascha L. Teichmann |
s@m³/s@m\u00b3/s@
|
| Wed, 08 Jun 2011 10:19:23 +0000 |
Sascha L. Teichmann |
Only generate an axis element if a axis really exists.
|
| Tue, 07 Jun 2011 21:01:09 +0000 |
Sascha L. Teichmann |
BackJumpCorrector: Simpified array swapping.
|
| Tue, 07 Jun 2011 15:05:12 +0000 |
Sascha L. Teichmann |
Use java.util.List instead of java.util.Vector. Removed superfluous imports.
|
| Tue, 07 Jun 2011 14:28:44 +0000 |
Sascha L. Teichmann |
code clean up in states
|
| Tue, 07 Jun 2011 13:15:02 +0000 |
Ingo Weinzierl |
The ChartInfoGenerator appends axes range information to the document now.
|
| Tue, 07 Jun 2011 11:43:30 +0000 |
Sascha L. Teichmann |
If Artifact.feed() fails do not store invalid values in database.
|
| Mon, 06 Jun 2011 11:34:44 +0000 |
Sascha L. Teichmann |
Removed asymmetrical "- 1" from width calculation.
|
| Sun, 05 Jun 2011 20:47:51 +0000 |
Sascha L. Teichmann |
Berechnung 4: Fixed problem when more than one value per segment are given.
|
| Sun, 05 Jun 2011 18:24:46 +0000 |
Sascha L. Teichmann |
Refactored version of "Berechnung 4"
|
| Fri, 03 Jun 2011 10:21:13 +0000 |
Ingo Weinzierl |
#90 Removed margins between data area border and curves.
|
| Fri, 03 Jun 2011 07:20:39 +0000 |
Ingo Weinzierl |
Refactored the chart creation in the ChartInfoGenerators. Now, every chart is created by the XYChartGenerator again.
|
| Fri, 03 Jun 2011 06:47:51 +0000 |
Ingo Weinzierl |
Charts are zoomed to a specified view if the attribute document for the chart creation contains an x and/or y range.
|
| Thu, 02 Jun 2011 15:47:08 +0000 |
Sascha L. Teichmann |
Set collection ttl to 6 hours.
|
| Wed, 01 Jun 2011 17:01:44 +0000 |
Sascha L. Teichmann |
Added parser for segments
|
| Wed, 01 Jun 2011 09:57:22 +0000 |
Sascha L. Teichmann |
Fix crashes in back jump correction.
|
| Wed, 01 Jun 2011 09:18:00 +0000 |
Ingo Weinzierl |
The matrix that is used to transform chart image coordinates into chart coordinates supports inverted x-axis now.
|
| Wed, 01 Jun 2011 08:01:07 +0000 |
Ingo Weinzierl |
Introduced a new output generators for creating chart info documents.
|
| Tue, 31 May 2011 14:56:18 +0000 |
Ingo Weinzierl |
Added support for the 'type' parameter of the collection's out() operation.
|
| Tue, 31 May 2011 09:35:19 +0000 |
Sascha L. Teichmann |
Use an explicit reference km for interpolation now.
|
| Mon, 30 May 2011 11:34:06 +0000 |
Sascha L. Teichmann |
Introduce a cache for the distance-info service
|
| Mon, 30 May 2011 09:19:57 +0000 |
Sascha L. Teichmann |
flys/issue82: Only successful interpolations are named.
|
| Fri, 27 May 2011 16:52:37 +0000 |
Sascha L. Teichmann |
Re-eanbled the calculation of the backjump correction.
|
| Fri, 27 May 2011 10:09:46 +0000 |
Ingo Weinzierl |
Removed XML debug statement.
|
| Fri, 27 May 2011 10:03:07 +0000 |
Ingo Weinzierl |
Moved the code part that skips themes to a better place. This let us paint empty charts with no themes at all.
|
| Fri, 27 May 2011 09:47:13 +0000 |
Ingo Weinzierl |
We will no longer put deactivated themes into the chart.
|
| Fri, 27 May 2011 08:46:26 +0000 |
Ingo Weinzierl |
Fixed the process of creating and storing the attribute of a collection.
|
| Thu, 26 May 2011 16:54:16 +0000 |
Sascha L. Teichmann |
Make "Berechnungsart 4" work independent of flow direction. Commented out back jump correction temporarily.
|
| Thu, 26 May 2011 15:55:48 +0000 |
Sascha L. Teichmann |
Generate fields for w/q input depend on flow direction.
|
| Thu, 26 May 2011 14:27:06 +0000 |
Sascha L. Teichmann |
Take the flow direction into account.
|
| Thu, 26 May 2011 09:41:57 +0000 |
Sascha L. Teichmann |
Round exploded values to a precision of 1e-6.
|
| Wed, 25 May 2011 15:31:25 +0000 |
Sascha L. Teichmann |
WST value table: Qs are now stored in ranges for each column.
|
| Tue, 24 May 2011 14:46:45 +0000 |
Sascha L. Teichmann |
First part of storing qs in ranges
|
| Tue, 24 May 2011 13:24:24 +0000 |
Ingo Weinzierl |
Small bugfixes in the WQ selection state.
|
| Tue, 24 May 2011 12:58:55 +0000 |
Ingo Weinzierl |
ISSUE-40 (part I/II) Write values that the user had former selected / inserted into DESCRIBE document to preselect such data in the UI.
|
| Tue, 24 May 2011 12:40:06 +0000 |
Ingo Weinzierl |
Removed needless imports.
|
| Tue, 24 May 2011 12:37:45 +0000 |
Ingo Weinzierl |
ISSUE-85 (part III/III) Use the given kilometer values for the waterlevel computation.
|
| Tue, 24 May 2011 11:27:37 +0000 |
Ingo Weinzierl |
ISSUE-85 (part I/III) Added further fields for the location/range state.
|
| Tue, 24 May 2011 11:23:57 +0000 |
Sascha L. Teichmann |
Moved WST value table cache key to a separate class.
|
| Mon, 23 May 2011 22:33:37 +0000 |
Sascha L. Teichmann |
Introduce model to store q values of WST columns efficiently.
|
| Mon, 23 May 2011 15:11:55 +0000 |
Ingo Weinzierl |
ISSUE-62 (part I/II) States are no longer filled with data - if a state needs user input, it needs to query the owner artifact.
|
| Mon, 23 May 2011 14:32:17 +0000 |
Ingo Weinzierl |
Added a method to dump the artifacts state/data.
|
| Mon, 23 May 2011 13:35:52 +0000 |
Sascha L. Teichmann |
flys/issue84: Forget to select wst kind.
|
| Fri, 20 May 2011 10:41:46 +0000 |
Sascha L. Teichmann |
fix for flys/issue81: km weights were swapped
|
| Fri, 20 May 2011 09:23:09 +0000 |
Ingo Weinzierl |
Tagged release 2.3.1 of flys-artifacts.
|
| Fri, 20 May 2011 09:21:38 +0000 |
Ingo Weinzierl |
Prepared Changes for the upcoming release.
|
| Fri, 20 May 2011 09:23:09 +0000 |
Ingo Weinzierl |
Tagged release 2.3.1 of flys-artifacts.
|
| Fri, 20 May 2011 06:04:42 +0000 |
Hans Plum |
Notes to Release V 2.3.1
|
| Thu, 19 May 2011 14:51:53 +0000 |
Sascha L. Teichmann |
Increment kms array size by one to take the end of range, too.
|
| Thu, 19 May 2011 14:38:15 +0000 |
Sascha L. Teichmann |
Use unsharp km lookup (epsilon = 0.0001).
|
| Thu, 19 May 2011 12:39:41 +0000 |
Ingo Weinzierl |
ISSUE-66 Fixed broken english subtitle template for longitudinal section charts.
|
| Thu, 19 May 2011 12:33:12 +0000 |
Ingo Weinzierl |
The curve of a computed discharge curve has a human readable text now.
|
| Thu, 19 May 2011 09:54:57 +0000 |
Sascha L. Teichmann |
Reintroduced titles for the "W for unausgeglichene Abfluesse".
|
| Thu, 19 May 2011 09:45:29 +0000 |
Ingo Weinzierl |
Added names for discharge curves (at gauges).
|
| Thu, 19 May 2011 09:31:47 +0000 |
Sascha L. Teichmann |
Removed dead code
|
| Thu, 19 May 2011 09:24:08 +0000 |
Sascha L. Teichmann |
use correct kms and step width now now
|
| Wed, 18 May 2011 17:37:06 +0000 |
Sascha L. Teichmann |
Use new logic to calculate "W für ungleichwertige Abfluesse". Not working yet.
|
| Wed, 18 May 2011 10:59:38 +0000 |
Ingo Weinzierl |
Enabled the discharge longitudinal section to be exported as WST.
|
| Wed, 18 May 2011 09:11:10 +0000 |
Sascha L. Teichmann |
flys/issue69: Connected calculation with the UI
|
| Wed, 18 May 2011 09:02:50 +0000 |
Ingo Weinzierl |
W and Q curves in longitudinal section curves will now have names.
|
| Wed, 18 May 2011 08:04:54 +0000 |
Ingo Weinzierl |
WSTs will now have a header that contains the names of the Ws or Qs that had been defined for the computation.
|
| Tue, 17 May 2011 16:31:07 +0000 |
Ingo Weinzierl |
Implemented writer that creates WSTs and enabled the WaterlevelExporter to create those.
|
| Tue, 17 May 2011 14:22:27 +0000 |
Ingo Weinzierl |
Added a new class that supports formatters for different types of data.
|
| Tue, 17 May 2011 11:53:02 +0000 |
Ingo Weinzierl |
ISSUE-72 Repaired broken XPath expression in MainValuesService to extract start and end kilometer.
|
| Tue, 17 May 2011 08:55:38 +0000 |
Sascha L. Teichmann |
Separated the WST table loading logic from the calculations.
|
| Tue, 17 May 2011 07:39:33 +0000 |
Ingo Weinzierl |
Tagged RELEASE 2.3
|
| Mon, 16 May 2011 10:34:59 +0000 |
Hans Plum |
Added NEWS File for collecting enduser-sepcific information for releases
|
| Sun, 15 May 2011 21:08:41 +0000 |
Sascha L. Teichmann |
First step to calculate "W fuer ungleichwertige Abfluesse" correctly. flys/issue55
|
| Sun, 15 May 2011 10:59:08 +0000 |
Sascha L. Teichmann |
Fix step to fix issue69: Do the right calculation
|
| Fri, 13 May 2011 11:26:29 +0000 |
Ingo Weinzierl |
Prepared Changes for the upcoming release 2.3.
|
| Fri, 13 May 2011 08:00:58 +0000 |
Ingo Weinzierl |
ISSUE-37 The river state wants to be rendered using a river_panel UI provider.
|
| Thu, 12 May 2011 09:11:16 +0000 |
Ingo Weinzierl |
Charts are generated using the size defined in the incoming request document.
|
| Wed, 11 May 2011 16:31:38 +0000 |
Ingo Weinzierl |
ISSUE-52 The longitudinal section charts will now always have the head of the river at the left side.
|
| Wed, 11 May 2011 09:51:54 +0000 |
Sascha L. Teichmann |
MetaDataService: Make incoming XML symmetric to DistanceInfoService.
|
| Tue, 10 May 2011 17:57:56 +0000 |
Ingo Weinzierl |
ISSUE-47 Adjusted the line color of W, Q and corrected W curves (temporarilly).
|
| Tue, 10 May 2011 17:12:15 +0000 |
Ingo Weinzierl |
Display gridlines in charts.
|
| Tue, 10 May 2011 16:10:01 +0000 |
Ingo Weinzierl |
ISSUE-53 Formatted number values of CSV exports.
|
| Tue, 10 May 2011 15:28:30 +0000 |
Ingo Weinzierl |
Implemented the input validation of WQ in the adapted WQ panel.
|
| Tue, 10 May 2011 13:18:03 +0000 |
Ingo Weinzierl |
The CSV exports will now have headers.
|
| Tue, 10 May 2011 12:43:12 +0000 |
Sascha L. Teichmann |
Datacage: Added river parameter to meta data services.
|
| Tue, 10 May 2011 12:19:17 +0000 |
Ingo Weinzierl |
Added subtitles to the available charts.
|
| Tue, 10 May 2011 11:40:15 +0000 |
Ingo Weinzierl |
Added a method to Resources that returns translated compound messages.
|
| Tue, 10 May 2011 10:26:26 +0000 |
Ingo Weinzierl |
Improved the OutGenerator interface to set a master artifact for the out generation.
|
| Tue, 10 May 2011 07:40:06 +0000 |
Ingo Weinzierl |
Enabled the WINFO artifact to choose between W and Q mode in the adapted wq panel of the discharge longitudinal section computation.
|
| Mon, 09 May 2011 19:54:24 +0000 |
Sascha L. Teichmann |
Datacage service: Cleanup served XML document.
|
| Mon, 09 May 2011 13:47:15 +0000 |
Sascha L. Teichmann |
Datacage: Added forgotten columns of fixation WST to datcage template.
|
| Mon, 09 May 2011 12:53:49 +0000 |
Ingo Weinzierl |
Enabled i18n support for charts.
|
| Mon, 09 May 2011 09:55:47 +0000 |
Ingo Weinzierl |
Added a CSV exporter for the discharge longitudinal section computation.
|
| Sat, 07 May 2011 21:34:02 +0000 |
Sascha L. Teichmann |
Back jump correction should work now for both flow directions.
|
| Fri, 06 May 2011 16:49:31 +0000 |
Sascha L. Teichmann |
Added data cage configuration for 'Längsschnitt'.
|
| Fri, 06 May 2011 14:19:27 +0000 |
Ingo Weinzierl |
Implemented methods to retrieve and compute the data used to create discharge longitudinal sections.
|
| Thu, 05 May 2011 12:34:53 +0000 |
Ingo Weinzierl |
Small bugfix in the adapted WQ state and further i18n strings.
|
| Thu, 05 May 2011 12:31:28 +0000 |
Ingo Weinzierl |
Changed the y-axis title of the computed discharge curve.
|
| Thu, 05 May 2011 06:12:44 +0000 |
Ingo Weinzierl |
Improved the transition model and added states to enable the 'discharge longitudinal section' computation - NOTE: the work in this computation has not finished yet.
|
| Thu, 05 May 2011 05:27:41 +0000 |
Ingo Weinzierl |
Use a default step width (100m) between two kilometers if no width is given.
|
| Thu, 05 May 2011 04:52:47 +0000 |
Ingo Weinzierl |
Fixed a potential NullPointerException while creating a longitudinal section chart.
|
| Wed, 04 May 2011 17:01:22 +0000 |
Sascha L. Teichmann |
fix flys/issue30
|
| Wed, 04 May 2011 13:51:25 +0000 |
Sascha L. Teichmann |
'berechnete Abflusskurve': generate ws from qs
|
| Wed, 04 May 2011 10:10:11 +0000 |
Ingo Weinzierl |
Filled the discharge curve exporter (CSV) with code - now, it generates a CSV export with the computed discharge curve data.
|
| Wed, 04 May 2011 08:24:50 +0000 |
Ingo Weinzierl |
Enabled the WINFO artifact to compute the data for discharge curves (computed) - ComputedDischargeCurveGenerator uses those values now to create the chart.
|
| Wed, 04 May 2011 07:48:39 +0000 |
Ingo Weinzierl |
Improved the transition model and added classes to enable the WINFO artifact to create computed discharge curves - NOTE: each of the new classes is just a stub.
|
| Tue, 03 May 2011 17:37:56 +0000 |
Ingo Weinzierl |
Added an exporter to export the computed data of a duration curve.
|
| Tue, 03 May 2011 17:34:29 +0000 |
Ingo Weinzierl |
Modified a confusing debug statement.
|
| Tue, 03 May 2011 16:36:21 +0000 |
Ingo Weinzierl |
Added an exporter (OutGenerator) for waterlevels which currently supports CSV exports.
|
| Tue, 03 May 2011 16:26:35 +0000 |
Ingo Weinzierl |
Introduced an export output target on collection level that enables collections to be exported.
|
| Tue, 03 May 2011 13:23:00 +0000 |
Ingo Weinzierl |
I18N Bugfix.
|
| Tue, 03 May 2011 13:15:56 +0000 |
Ingo Weinzierl |
Added i18n strings for the location selection.
|
| Tue, 03 May 2011 12:05:32 +0000 |
Ingo Weinzierl |
Enabled the WINFO artifact to create duration curves - new OutGenerator, added methods for data computation.
|
| Tue, 03 May 2011 09:23:17 +0000 |
Sascha L. Teichmann |
visualize-transitions.xsl: State quoting was done wrong.
|
| Mon, 02 May 2011 16:58:04 +0000 |
Ingo Weinzierl |
Enhanced the transition model to reach a state that creates duration curves.
|
| Mon, 02 May 2011 16:50:58 +0000 |
Sascha L. Teichmann |
Flush/persist cache at end of program.
|
| Mon, 02 May 2011 16:44:02 +0000 |
Ingo Weinzierl |
The DischargeCurveGenerator uses public methods of FLYSArtifact to retrieve all necessary information of the current settings.
|
| Mon, 02 May 2011 16:28:57 +0000 |
Sascha L. Teichmann |
Moved expensive allocation of result arrays out of km loop.
|
| Mon, 02 May 2011 15:17:04 +0000 |
Ingo Weinzierl |
Enabled the FLYSArtifact to handle an array of inserted WQ values (without given ranges).
|
| Mon, 02 May 2011 13:42:02 +0000 |
Sascha L. Teichmann |
Repaired DischargeTables.getQForW()
|
| Mon, 02 May 2011 12:47:10 +0000 |
Ingo Weinzierl |
Enabled the server to handle longitudinal section chart requests with inserted W data - Ws are transformed into Qs then.
|
| Mon, 02 May 2011 12:41:24 +0000 |
Ingo Weinzierl |
Removed an unused parameter from DischargeTables.getQForW().
|
| Mon, 02 May 2011 09:41:22 +0000 |
Ingo Weinzierl |
Ws and Qs of a longitudinal section chart are mapped to an own range axis now.
|
| Sun, 01 May 2011 10:58:38 +0000 |
Sascha L. Teichmann |
Added caching support for the wst value tables.
|
| Fri, 29 Apr 2011 16:56:37 +0000 |
Sascha L. Teichmann |
Added ehcache support.
|
| Fri, 29 Apr 2011 15:10:44 +0000 |
Sascha L. Teichmann |
Added meta data service.
|
| Fri, 29 Apr 2011 14:39:42 +0000 |
Sascha L. Teichmann |
Added meta service stub. TODO: Add meta data builder.
|
| Fri, 29 Apr 2011 13:06:49 +0000 |
Ingo Weinzierl |
Bugfix: Changed the datastructure of the ThemeList (inner class of FLYSArtifactCollection) to store the theme of a chart in an ordered list -> Q curves of longitudinal section charts are now drawn.
|
| Fri, 29 Apr 2011 10:13:24 +0000 |
Ingo Weinzierl |
Implemented the chart creation of a longitudinal section chart - W and Q facets.
|
| Fri, 29 Apr 2011 10:02:59 +0000 |
Ingo Weinzierl |
Improved the calculation of the step width of ranges.
|
| Fri, 29 Apr 2011 10:01:41 +0000 |
Ingo Weinzierl |
New method WQKms.size() to retrieve the number of elements in the data pool.
|
| Fri, 29 Apr 2011 08:39:17 +0000 |
Sascha L. Teichmann |
WQKms model: Added a get() method which takes destination array as an argument.
|
| Fri, 29 Apr 2011 08:28:44 +0000 |
Ingo Weinzierl |
Introduced GNU Trove to store WQKms values in a more performant data structure.
|
| Fri, 29 Apr 2011 08:13:56 +0000 |
Ingo Weinzierl |
Added the name of the facet to the parameterlist of OutGenerator.doOut().
|
| Fri, 29 Apr 2011 08:02:54 +0000 |
Ingo Weinzierl |
Added themes and mappings for the W and Q theme of a longitudinal section curve.
|
| Fri, 29 Apr 2011 07:46:27 +0000 |
Ingo Weinzierl |
Added necessary methods to start the computation of waterlevel data.
|
| Fri, 29 Apr 2011 07:27:05 +0000 |
Ingo Weinzierl |
Introduced a model class to store a set of triple data objects that consist of W, Q and Kms information.
|
| Fri, 29 Apr 2011 07:22:25 +0000 |
Ingo Weinzierl |
Bugfix: Removed endless loop and a bug while iterating over Hibernate results.
|
| Thu, 28 Apr 2011 12:54:11 +0000 |
Ingo Weinzierl |
Added an OutGenerator for creating longitudinal section curves.
|
| Thu, 28 Apr 2011 12:23:40 +0000 |
Ingo Weinzierl |
Bugfix: Added missing <output-generators> section to the global configuration.
|
| Thu, 28 Apr 2011 11:32:41 +0000 |
Ingo Weinzierl |
Added a further state that is reached if the waterlevel calculation mode has been chosen.
|
| Thu, 28 Apr 2011 11:22:45 +0000 |
Ingo Weinzierl |
Added a new Transition to compare values.
|
| Thu, 28 Apr 2011 11:20:11 +0000 |
Ingo Weinzierl |
Bugfixes: Adapted a broken method call of TransitionEngine.isStateReachable() and added the outputs of a current state to the DESCRIBE.
|
| Thu, 28 Apr 2011 11:16:21 +0000 |
Ingo Weinzierl |
Bugfix: Added the missing init() method to a Transition and call it in the TransitionFactory after a Transition has been created.
|
| Thu, 28 Apr 2011 11:13:06 +0000 |
Ingo Weinzierl |
Bugfix: The outputs of a Collection's attribute document are stored in an outputs node now instead of being stored toplevel in the document.
|
| Thu, 28 Apr 2011 11:08:34 +0000 |
Ingo Weinzierl |
Throw an illegal argument exception in LocationDistanceSelect.validate() and WQSelect.validate() if no data has been inserted so far.
|
| Thu, 28 Apr 2011 09:09:44 +0000 |
Sascha L. Teichmann |
Added XSL transformation do create Graphviz digraph out of conf.xml
|
| Thu, 28 Apr 2011 08:14:20 +0000 |
Ingo Weinzierl |
The OutGenerator gets the theme of a facet while output creation.
|
| Wed, 27 Apr 2011 14:42:52 +0000 |
Ingo Weinzierl |
Removed useless imports.
|
| Wed, 27 Apr 2011 14:40:44 +0000 |
Ingo Weinzierl |
Added an abstract OutGenerator that should be the base class for all generators which create charts.
|
| Wed, 27 Apr 2011 14:35:44 +0000 |
Ingo Weinzierl |
Improved the out() operation of a Collection - the OutGenerator gets to know about the facets and its theme.
|
| Tue, 26 Apr 2011 13:29:18 +0000 |
Ingo Weinzierl |
The Attributes of a collection are written into its DESCRIBE now.
|
| Tue, 26 Apr 2011 13:17:08 +0000 |
Ingo Weinzierl |
Initialized the facet2theme mappings configured in themes.xml and added a function to the ThemeFactory that retrieves a theme from FLYSContext based on its name.
|
| Fri, 22 Apr 2011 15:49:35 +0000 |
Sascha L. Teichmann |
Corrected a silly c&p mistake.
|
| Fri, 22 Apr 2011 09:57:27 +0000 |
Sascha L. Teichmann |
Implementation of the "Ruecksprungkorrektur" to be done in "W fuer angepassten Abflusslaengschnitt".
|
| Thu, 21 Apr 2011 08:49:58 +0000 |
Ingo Weinzierl |
Removed debug code that has been commited by accident.
|
| Thu, 21 Apr 2011 08:47:39 +0000 |
Ingo Weinzierl |
Added a first small theme configuration and code to read it.
|
| Thu, 21 Apr 2011 08:44:41 +0000 |
Ingo Weinzierl |
Implementation of interfaces and its default implementations and a factory to work with themes.
|
| Wed, 20 Apr 2011 14:26:51 +0000 |
Sascha L. Teichmann |
Implementation of "Abflusskurve/Abflusstafel" calculation.
|
| Wed, 20 Apr 2011 13:13:19 +0000 |
Sascha L. Teichmann |
Added dependency to Apache Commons Math 2.2 (Apache License 2.0)
|
| Wed, 20 Apr 2011 09:46:40 +0000 |
Sascha L. Teichmann |
Discharge table: Fix problem when sorting by q (copied w instead of q).
|
| Wed, 20 Apr 2011 08:00:38 +0000 |
Ingo Weinzierl |
Fixed broken HQL statement.
|
| Tue, 19 Apr 2011 17:43:39 +0000 |
Sascha L. Teichmann |
Implemented the "Wasserstand/Wasserspiegellagen" calculation.
|
| Tue, 19 Apr 2011 17:37:21 +0000 |
Sascha L. Teichmann |
Discharge table: we need a getQForW() and not a getWForQ().
|
| Tue, 19 Apr 2011 14:48:28 +0000 |
Sascha L. Teichmann |
Discharge tables: Sorting of q values was done wrong.
|
| Tue, 19 Apr 2011 13:10:27 +0000 |
Ingo Weinzierl |
The list of annotations returned by the AnnotationFactory is ordered by its range.
|
| Tue, 19 Apr 2011 12:33:39 +0000 |
Ingo Weinzierl |
Added a service that returns the MainValues of a Gauge based on a river name and a stationing.
|
| Tue, 19 Apr 2011 12:31:07 +0000 |
Ingo Weinzierl |
Added a factory that returns MainValues.
|
| Tue, 19 Apr 2011 11:05:27 +0000 |
Sascha L. Teichmann |
Discharge table: Added static method getWForQ() to interpolate a w value for a given q value based on a given discharge table.
|
| Tue, 19 Apr 2011 10:32:31 +0000 |
Sascha L. Teichmann |
Discharge tables: Added convenience constructors/methods to ease the access to the master discharge table of a gauge.
|
| Mon, 18 Apr 2011 16:01:23 +0000 |
Sascha L. Teichmann |
Moved the query complexity of creating a w/q value table into view
|
| Mon, 18 Apr 2011 14:40:35 +0000 |
Sascha L. Teichmann |
Fetches w/q value tables from the backend.
|
| Mon, 18 Apr 2011 13:23:12 +0000 |
Ingo Weinzierl |
Changed the error key that is written to the result document of the feed operation.
|
| Mon, 18 Apr 2011 13:21:52 +0000 |
Ingo Weinzierl |
The inserted river is validated in the feed operation().
|
| Mon, 18 Apr 2011 13:00:57 +0000 |
Ingo Weinzierl |
The calculation method is validated in the feed() operation.
|
| Mon, 18 Apr 2011 12:36:08 +0000 |
Ingo Weinzierl |
The inserted ranges (distance and WQ ranges) are validated in the feed() operation.
|
| Mon, 18 Apr 2011 09:34:18 +0000 |
Ingo Weinzierl |
Removed testing code that has been comitted by accident in the last revision.
|
| Mon, 18 Apr 2011 07:39:17 +0000 |
Ingo Weinzierl |
The getGauge() method of the FLYSArtifact returns the first gauge based on the given stationing now.
|
| Fri, 15 Apr 2011 13:47:10 +0000 |
Ingo Weinzierl |
The WQ state fills the DESCRIBE with default values for W and Q.
|
| Fri, 15 Apr 2011 13:46:22 +0000 |
Ingo Weinzierl |
Added a WstFactory to return Wst objects.
|
| Fri, 15 Apr 2011 13:37:51 +0000 |
Ingo Weinzierl |
FLYSArtifact provides methods to retrieve the real River, Gauge objects.
|
| Fri, 15 Apr 2011 10:10:37 +0000 |
Ingo Weinzierl |
Bugfix: repaired broken imports of the session holder.
|
| Fri, 15 Apr 2011 09:52:37 +0000 |
Ingo Weinzierl |
Removed the SessionHolder and adapted imports.
|
| Thu, 14 Apr 2011 13:45:50 +0000 |
Sascha L. Teichmann |
Acquire/release sessions in services to avoid db connection leaks.
|
| Thu, 14 Apr 2011 13:36:06 +0000 |
Ingo Weinzierl |
The location/distance state now writes default values into DESCRIBE.
|
| Thu, 14 Apr 2011 13:26:29 +0000 |
Ingo Weinzierl |
Added a new function to RiverFactory that retrieves a River object based on a given river name.
|
| Thu, 14 Apr 2011 13:15:16 +0000 |
Sascha L. Teichmann |
Backend access: Static methods are using the SessionHolder, too.
|
| Thu, 14 Apr 2011 13:11:12 +0000 |
Ingo Weinzierl |
Finalized the SessionCallContextListener and registered it as CallContext.Listener in the configuration.
|
| Thu, 14 Apr 2011 12:59:21 +0000 |
Ingo Weinzierl |
Bugfix: Call correct method to retrieve and initialize an instance of SessionFactoryProvider.
|
| Thu, 14 Apr 2011 12:08:47 +0000 |
Sascha L. Teichmann |
Added a session holder to hold hibernate sessions.
|
| Thu, 14 Apr 2011 11:18:28 +0000 |
Ingo Weinzierl |
Added an Implementation of CallContext.Listener to open/close Hibernate Sessions for each request.
|
| Thu, 14 Apr 2011 08:32:18 +0000 |
Ingo Weinzierl |
Modified the states' describe() method - related to the last commit.
|
| Thu, 14 Apr 2011 08:23:15 +0000 |
Ingo Weinzierl |
Removed the state to explicitly select a gauge.
|
| Wed, 13 Apr 2011 08:31:20 +0000 |
Ingo Weinzierl |
Bugfix: Repaired the dynamic UI part of the RiverSelect state in DESCRIBE.
|
| Tue, 12 Apr 2011 13:42:14 +0000 |
Ingo Weinzierl |
Write the name of an artifact into the DESCRIBE document.
|
| Tue, 12 Apr 2011 07:49:36 +0000 |
Ingo Weinzierl |
Bugfix: States are filled with data before they describe themself.
|
| Mon, 11 Apr 2011 12:54:03 +0000 |
Ingo Weinzierl |
Implemented a service that retrieves distance information for a specific river.
|
| Wed, 06 Apr 2011 10:01:49 +0000 |
Ingo Weinzierl |
The FLYSArtifactCollection overrides out() and uses OutGenerators to create output for this operation.
|
| Wed, 06 Apr 2011 09:56:38 +0000 |
Ingo Weinzierl |
Added a DischargeCurveGenerator that creates discharge curves.
|
| Wed, 06 Apr 2011 09:53:14 +0000 |
Ingo Weinzierl |
Changed the visibility of getData() method of FLYSArtifacts.
|
| Sun, 03 Apr 2011 10:55:16 +0000 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
| Sun, 03 Apr 2011 10:53:14 +0000 |
Sascha L. Teichmann |
Make project compilable again.
|
| Thu, 31 Mar 2011 10:56:08 +0000 |
Ingo Weinzierl |
Added code to parse the configured OutGenerators in the global configuration and to save a map of such in the FLYSContext.
|
| Thu, 31 Mar 2011 10:54:07 +0000 |
Ingo Weinzierl |
Added an OutGenerator interface that might be used to generator collected outputs of a set of artifacts.
|
| Wed, 30 Mar 2011 16:00:51 +0000 |
Ingo Weinzierl |
Removed the Backend reference from FLYSArtifactCollection.
|
| Wed, 30 Mar 2011 15:21:12 +0000 |
Ingo Weinzierl |
Enhanced the output mode for discharge curves with three facets.
|
| Wed, 30 Mar 2011 13:47:02 +0000 |
Ingo Weinzierl |
Tagged RELEASE 0.1 of FLYS Artifacts.
|
| Wed, 30 Mar 2011 08:22:30 +0000 |
Ingo Weinzierl |
Renamed an output mode in the WINFO artifact configuration.
|
| Tue, 29 Mar 2011 13:57:25 +0000 |
Ingo Weinzierl |
Changed a german string in the resource bundle.
|
| Tue, 29 Mar 2011 09:54:06 +0000 |
Ingo Weinzierl |
Adapted the available calculation modes of WINFO and its order in the DESCRIBE document.
|
| Mon, 28 Mar 2011 16:58:17 +0000 |
Ingo Weinzierl |
Added the hash code of an artifact to the artifact part of the collection's DESCRIBE document.
|
| Mon, 28 Mar 2011 16:36:13 +0000 |
Ingo Weinzierl |
Changed the background color of discharge curves to white.
|
| Mon, 28 Mar 2011 15:21:27 +0000 |
Sascha L. Teichmann |
DischargeTables: Cache the scale, too. Otherwise two calls to getValues() with different arguments will result in the same output.
|
| Mon, 28 Mar 2011 14:33:36 +0000 |
Ingo Weinzierl |
The out() operation of the WINFO artifact draws discharge tables for gauges specified by the user.
|
| Mon, 28 Mar 2011 10:48:27 +0000 |
Ingo Weinzierl |
Added a helper class to export charts.
|
| Mon, 28 Mar 2011 09:17:25 +0000 |
Sascha L. Teichmann |
Add factory to fetch gauges from database and filter them
|
| Fri, 25 Mar 2011 13:51:09 +0000 |
Sascha L. Teichmann |
Don't used interleaved x/y data.
|
| Fri, 25 Mar 2011 11:03:51 +0000 |
Ingo Weinzierl |
Updated the TODO list.
|
| Fri, 25 Mar 2011 10:23:59 +0000 |
Ingo Weinzierl |
Bugfix: Added a missing artifact namespace prefix in the DESCRIBE document of a FLYSArtifactCollection.
|
| Thu, 24 Mar 2011 18:47:07 +0000 |
Ingo Weinzierl |
Implemented a FLYSArtifactCollection that will be used in this application now.
|
| Thu, 24 Mar 2011 17:29:08 +0000 |
Sascha L. Teichmann |
Fetch w/q values of discharge tables for given gauges.
|
| Thu, 24 Mar 2011 17:06:08 +0000 |
Ingo Weinzierl |
Added a further german resource bundle.
|
| Wed, 23 Mar 2011 10:52:01 +0000 |
Ingo Weinzierl |
The DESCRIBE of the WINFO artifact contains the available output modes now.
|
| Tue, 22 Mar 2011 16:09:30 +0000 |
Ingo Weinzierl |
The location_distance state of the WINFO parameterization has an output mode 'discharge_table' now.
|
| Mon, 21 Mar 2011 09:18:04 +0000 |
Ingo Weinzierl |
Append human readable strings of the selected values to the DESCRIBE output.
|
| Mon, 21 Mar 2011 09:16:17 +0000 |
Ingo Weinzierl |
Added some more calculation types (to the DESCRIBE in the calculation select state).
|
| Mon, 21 Mar 2011 08:17:15 +0000 |
Ingo Weinzierl |
Implemented the step-back part of the advance() operation.
|
| Mon, 21 Mar 2011 06:11:01 +0000 |
Ingo Weinzierl |
Fixed a german umlaut.
|
| Fri, 18 Mar 2011 09:42:21 +0000 |
Ingo Weinzierl |
Added new states to insert location/distance and w/q data in the config of a WINFO artifact.
|
| Fri, 18 Mar 2011 09:38:11 +0000 |
Ingo Weinzierl |
Added a new state for the W/Q input in the WINFO parameterization.
|
| Fri, 18 Mar 2011 08:50:42 +0000 |
Ingo Weinzierl |
New state for the location/distance input and some litte modifications of the DefaultState.
|
| Thu, 17 Mar 2011 16:37:39 +0000 |
Ingo Weinzierl |
Added a method to retrieve the UIProvider for a state.
|
| Thu, 17 Mar 2011 16:03:36 +0000 |
Ingo Weinzierl |
Let the states describe the static ui part.
|
| Thu, 17 Mar 2011 12:17:37 +0000 |
Ingo Weinzierl |
The 'rivers' service retrieves the rivers from backend now.
|
| Thu, 17 Mar 2011 11:46:43 +0000 |
Sascha L. Teichmann |
Added support for the flys backend and an example how to use it.
|
| Tue, 15 Mar 2011 17:12:58 +0000 |
Sascha L. Teichmann |
Added section in configuration for database backend.
|
| Tue, 15 Mar 2011 15:53:02 +0000 |
Sascha L. Teichmann |
Fixed build error coming from different import of XMLUtils.
|
| Mon, 14 Mar 2011 17:43:52 +0000 |
Ingo Weinzierl |
Appended a missing node to the DESCRIBE.
|
| Mon, 14 Mar 2011 16:32:42 +0000 |
Ingo Weinzierl |
I18N of strings for the DESCRIBE document.
|
| Mon, 14 Mar 2011 15:47:10 +0000 |
Ingo Weinzierl |
Introduced a state to select the calculation mode.
|
| Mon, 14 Mar 2011 15:43:12 +0000 |
Ingo Weinzierl |
Added an abstract base class DefaultState for States.
|
| Mon, 14 Mar 2011 14:16:37 +0000 |
Ingo Weinzierl |
Implemented a singleton instance that provides i18n strings.
|
| Thu, 10 Mar 2011 13:31:36 +0000 |
Ingo Weinzierl |
Appende the static data to the static node of the DESCRIBE document.
|
| Thu, 10 Mar 2011 08:38:05 +0000 |
Ingo Weinzierl |
The operations feed() and advance() return the current description of the artifact now.
|
| Thu, 10 Mar 2011 05:56:17 +0000 |
Ingo Weinzierl |
Implemented the step-forward part of the advance operation.
|
| Wed, 09 Mar 2011 14:13:57 +0000 |
Ingo Weinzierl |
Implemented the feed() operation.
|
| Wed, 09 Mar 2011 14:07:03 +0000 |
Ingo Weinzierl |
Added a TODO file.
|
| Wed, 09 Mar 2011 11:29:07 +0000 |
Ingo Weinzierl |
Added a FLYSArtifact that serves as the default artifact for the FLYS application.
|
| Tue, 08 Mar 2011 17:22:37 +0000 |
Ingo Weinzierl |
Added a RiverService (/service/rivers) that retrieves a list of provided rivers.
|
| Mon, 07 Mar 2011 14:43:14 +0000 |
Ingo Weinzierl |
Added a nodes for the user-factory and collection-factory to the configuration.
|
| Tue, 01 Mar 2011 17:18:08 +0000 |
Ingo Weinzierl |
Replaced the 'special' attribute of the DESCRIBE with a 'uiprovider' attribute.
|
| Tue, 08 Feb 2011 09:11:25 +0000 |
Ingo Weinzierl |
The RiverSelect state creates the dynamic UI part for the describe document now.
|
| Tue, 08 Feb 2011 09:02:18 +0000 |
Ingo Weinzierl |
Added mockup classes for working with rivers.
|
| Mon, 07 Feb 2011 17:42:14 +0000 |
Ingo Weinzierl |
The input data items of a state are read from configuration after the state has been setup.
|
| Mon, 07 Feb 2011 11:37:33 +0000 |
Ingo Weinzierl |
Added the current state and reachable states description to the describe document of the WINFO artifact.
|
| Mon, 07 Feb 2011 11:32:59 +0000 |
Ingo Weinzierl |
Changed the way of storing transitions in the TransitionEngine.
|
| Fri, 04 Feb 2011 16:57:08 +0000 |
Ingo Weinzierl |
Improved the WINFO artifact. Describe() returns the uuid and the hash of the artifact instead of just nothing.
|
| Fri, 04 Feb 2011 11:18:59 +0000 |
Ingo Weinzierl |
Improved the init process of the WINFOArtifact - there are two new states to select the river and the gauge.
|
| Fri, 04 Feb 2011 11:09:11 +0000 |
Ingo Weinzierl |
Improved the bootstrap process - the states are initialized.
|
| Thu, 03 Feb 2011 10:23:30 +0000 |
Ingo Weinzierl |
Initializes a TransitionEngine storing all transitions for each artifact at the application start.
|
| Wed, 02 Feb 2011 14:56:22 +0000 |
Ingo Weinzierl |
Added a first stub of an WINFO artifact.
|
| Tue, 01 Feb 2011 17:56:29 +0000 |
Sascha L. Teichmann |
Added initial mvn project for FLYS artifacts.
|
