| Mon, 23 May 2011 13:35:52 +0000 |
Sascha L. Teichmann |
flys/issue84: Forget to select wst kind.
|
| Fri, 20 May 2011 10:41:46 +0000 |
Sascha L. Teichmann |
fix for flys/issue81: km weights were swapped
|
| Fri, 20 May 2011 09:23:09 +0000 |
Ingo Weinzierl |
Tagged release 2.3.1 of flys-artifacts.
|
| Fri, 20 May 2011 09:21:38 +0000 |
Ingo Weinzierl |
Prepared Changes for the upcoming release.
|
| Fri, 20 May 2011 09:23:09 +0000 |
Ingo Weinzierl |
Tagged release 2.3.1 of flys-artifacts.
|
| Fri, 20 May 2011 06:04:42 +0000 |
Hans Plum |
Notes to Release V 2.3.1
|
| Thu, 19 May 2011 14:51:53 +0000 |
Sascha L. Teichmann |
Increment kms array size by one to take the end of range, too.
|
| Thu, 19 May 2011 14:38:15 +0000 |
Sascha L. Teichmann |
Use unsharp km lookup (epsilon = 0.0001).
|
| Thu, 19 May 2011 12:39:41 +0000 |
Ingo Weinzierl |
ISSUE-66 Fixed broken english subtitle template for longitudinal section charts.
|
| Thu, 19 May 2011 12:33:12 +0000 |
Ingo Weinzierl |
The curve of a computed discharge curve has a human readable text now.
|
| Thu, 19 May 2011 09:54:57 +0000 |
Sascha L. Teichmann |
Reintroduced titles for the "W for unausgeglichene Abfluesse".
|
| Thu, 19 May 2011 09:45:29 +0000 |
Ingo Weinzierl |
Added names for discharge curves (at gauges).
|
| Thu, 19 May 2011 09:31:47 +0000 |
Sascha L. Teichmann |
Removed dead code
|
| Thu, 19 May 2011 09:24:08 +0000 |
Sascha L. Teichmann |
use correct kms and step width now now
|
| Wed, 18 May 2011 17:37:06 +0000 |
Sascha L. Teichmann |
Use new logic to calculate "W für ungleichwertige Abfluesse". Not working yet.
|
| Wed, 18 May 2011 10:59:38 +0000 |
Ingo Weinzierl |
Enabled the discharge longitudinal section to be exported as WST.
|
| Wed, 18 May 2011 09:11:10 +0000 |
Sascha L. Teichmann |
flys/issue69: Connected calculation with the UI
|
| Wed, 18 May 2011 09:02:50 +0000 |
Ingo Weinzierl |
W and Q curves in longitudinal section curves will now have names.
|
| Wed, 18 May 2011 08:04:54 +0000 |
Ingo Weinzierl |
WSTs will now have a header that contains the names of the Ws or Qs that had been defined for the computation.
|
| Tue, 17 May 2011 16:31:07 +0000 |
Ingo Weinzierl |
Implemented writer that creates WSTs and enabled the WaterlevelExporter to create those.
|
| Tue, 17 May 2011 14:22:27 +0000 |
Ingo Weinzierl |
Added a new class that supports formatters for different types of data.
|
| Tue, 17 May 2011 11:53:02 +0000 |
Ingo Weinzierl |
ISSUE-72 Repaired broken XPath expression in MainValuesService to extract start and end kilometer.
|
| Tue, 17 May 2011 08:55:38 +0000 |
Sascha L. Teichmann |
Separated the WST table loading logic from the calculations.
|
| Tue, 17 May 2011 07:39:33 +0000 |
Ingo Weinzierl |
Tagged RELEASE 2.3
|
| Mon, 16 May 2011 10:34:59 +0000 |
Hans Plum |
Added NEWS File for collecting enduser-sepcific information for releases
|
| Sun, 15 May 2011 21:08:41 +0000 |
Sascha L. Teichmann |
First step to calculate "W fuer ungleichwertige Abfluesse" correctly. flys/issue55
|
| Sun, 15 May 2011 10:59:08 +0000 |
Sascha L. Teichmann |
Fix step to fix issue69: Do the right calculation
|
| Fri, 13 May 2011 11:26:29 +0000 |
Ingo Weinzierl |
Prepared Changes for the upcoming release 2.3.
|
| Fri, 13 May 2011 08:00:58 +0000 |
Ingo Weinzierl |
ISSUE-37 The river state wants to be rendered using a river_panel UI provider.
|
| Thu, 12 May 2011 09:11:16 +0000 |
Ingo Weinzierl |
Charts are generated using the size defined in the incoming request document.
|
| Wed, 11 May 2011 16:31:38 +0000 |
Ingo Weinzierl |
ISSUE-52 The longitudinal section charts will now always have the head of the river at the left side.
|
| Wed, 11 May 2011 09:51:54 +0000 |
Sascha L. Teichmann |
MetaDataService: Make incoming XML symmetric to DistanceInfoService.
|
| Tue, 10 May 2011 17:57:56 +0000 |
Ingo Weinzierl |
ISSUE-47 Adjusted the line color of W, Q and corrected W curves (temporarilly).
|
| Tue, 10 May 2011 17:12:15 +0000 |
Ingo Weinzierl |
Display gridlines in charts.
|
| Tue, 10 May 2011 16:10:01 +0000 |
Ingo Weinzierl |
ISSUE-53 Formatted number values of CSV exports.
|
| Tue, 10 May 2011 15:28:30 +0000 |
Ingo Weinzierl |
Implemented the input validation of WQ in the adapted WQ panel.
|
| Tue, 10 May 2011 13:18:03 +0000 |
Ingo Weinzierl |
The CSV exports will now have headers.
|
| Tue, 10 May 2011 12:43:12 +0000 |
Sascha L. Teichmann |
Datacage: Added river parameter to meta data services.
|
| Tue, 10 May 2011 12:19:17 +0000 |
Ingo Weinzierl |
Added subtitles to the available charts.
|
| Tue, 10 May 2011 11:40:15 +0000 |
Ingo Weinzierl |
Added a method to Resources that returns translated compound messages.
|
| Tue, 10 May 2011 10:26:26 +0000 |
Ingo Weinzierl |
Improved the OutGenerator interface to set a master artifact for the out generation.
|
| Tue, 10 May 2011 07:40:06 +0000 |
Ingo Weinzierl |
Enabled the WINFO artifact to choose between W and Q mode in the adapted wq panel of the discharge longitudinal section computation.
|
| Mon, 09 May 2011 19:54:24 +0000 |
Sascha L. Teichmann |
Datacage service: Cleanup served XML document.
|
| Mon, 09 May 2011 13:47:15 +0000 |
Sascha L. Teichmann |
Datacage: Added forgotten columns of fixation WST to datcage template.
|
| Mon, 09 May 2011 12:53:49 +0000 |
Ingo Weinzierl |
Enabled i18n support for charts.
|
| Mon, 09 May 2011 09:55:47 +0000 |
Ingo Weinzierl |
Added a CSV exporter for the discharge longitudinal section computation.
|
| Sat, 07 May 2011 21:34:02 +0000 |
Sascha L. Teichmann |
Back jump correction should work now for both flow directions.
|
| Fri, 06 May 2011 16:49:31 +0000 |
Sascha L. Teichmann |
Added data cage configuration for 'Längsschnitt'.
|
| Fri, 06 May 2011 14:19:27 +0000 |
Ingo Weinzierl |
Implemented methods to retrieve and compute the data used to create discharge longitudinal sections.
|
| Thu, 05 May 2011 12:34:53 +0000 |
Ingo Weinzierl |
Small bugfix in the adapted WQ state and further i18n strings.
|
| Thu, 05 May 2011 12:31:28 +0000 |
Ingo Weinzierl |
Changed the y-axis title of the computed discharge curve.
|
| Thu, 05 May 2011 06:12:44 +0000 |
Ingo Weinzierl |
Improved the transition model and added states to enable the 'discharge longitudinal section' computation - NOTE: the work in this computation has not finished yet.
|
| Thu, 05 May 2011 05:27:41 +0000 |
Ingo Weinzierl |
Use a default step width (100m) between two kilometers if no width is given.
|
| Thu, 05 May 2011 04:52:47 +0000 |
Ingo Weinzierl |
Fixed a potential NullPointerException while creating a longitudinal section chart.
|
| Wed, 04 May 2011 17:01:22 +0000 |
Sascha L. Teichmann |
fix flys/issue30
|
| Wed, 04 May 2011 13:51:25 +0000 |
Sascha L. Teichmann |
'berechnete Abflusskurve': generate ws from qs
|
| Wed, 04 May 2011 10:10:11 +0000 |
Ingo Weinzierl |
Filled the discharge curve exporter (CSV) with code - now, it generates a CSV export with the computed discharge curve data.
|
| Wed, 04 May 2011 08:24:50 +0000 |
Ingo Weinzierl |
Enabled the WINFO artifact to compute the data for discharge curves (computed) - ComputedDischargeCurveGenerator uses those values now to create the chart.
|
| Wed, 04 May 2011 07:48:39 +0000 |
Ingo Weinzierl |
Improved the transition model and added classes to enable the WINFO artifact to create computed discharge curves - NOTE: each of the new classes is just a stub.
|
| Tue, 03 May 2011 17:37:56 +0000 |
Ingo Weinzierl |
Added an exporter to export the computed data of a duration curve.
|
| Tue, 03 May 2011 17:34:29 +0000 |
Ingo Weinzierl |
Modified a confusing debug statement.
|
| Tue, 03 May 2011 16:36:21 +0000 |
Ingo Weinzierl |
Added an exporter (OutGenerator) for waterlevels which currently supports CSV exports.
|
| Tue, 03 May 2011 16:26:35 +0000 |
Ingo Weinzierl |
Introduced an export output target on collection level that enables collections to be exported.
|
| Tue, 03 May 2011 13:23:00 +0000 |
Ingo Weinzierl |
I18N Bugfix.
|
| Tue, 03 May 2011 13:15:56 +0000 |
Ingo Weinzierl |
Added i18n strings for the location selection.
|
| Tue, 03 May 2011 12:05:32 +0000 |
Ingo Weinzierl |
Enabled the WINFO artifact to create duration curves - new OutGenerator, added methods for data computation.
|
| Tue, 03 May 2011 09:23:17 +0000 |
Sascha L. Teichmann |
visualize-transitions.xsl: State quoting was done wrong.
|
| Mon, 02 May 2011 16:58:04 +0000 |
Ingo Weinzierl |
Enhanced the transition model to reach a state that creates duration curves.
|
| Mon, 02 May 2011 16:50:58 +0000 |
Sascha L. Teichmann |
Flush/persist cache at end of program.
|
| Mon, 02 May 2011 16:44:02 +0000 |
Ingo Weinzierl |
The DischargeCurveGenerator uses public methods of FLYSArtifact to retrieve all necessary information of the current settings.
|
| Mon, 02 May 2011 16:28:57 +0000 |
Sascha L. Teichmann |
Moved expensive allocation of result arrays out of km loop.
|
| Mon, 02 May 2011 15:17:04 +0000 |
Ingo Weinzierl |
Enabled the FLYSArtifact to handle an array of inserted WQ values (without given ranges).
|
| Mon, 02 May 2011 13:42:02 +0000 |
Sascha L. Teichmann |
Repaired DischargeTables.getQForW()
|
| Mon, 02 May 2011 12:47:10 +0000 |
Ingo Weinzierl |
Enabled the server to handle longitudinal section chart requests with inserted W data - Ws are transformed into Qs then.
|
| Mon, 02 May 2011 12:41:24 +0000 |
Ingo Weinzierl |
Removed an unused parameter from DischargeTables.getQForW().
|
| Mon, 02 May 2011 09:41:22 +0000 |
Ingo Weinzierl |
Ws and Qs of a longitudinal section chart are mapped to an own range axis now.
|
| Sun, 01 May 2011 10:58:38 +0000 |
Sascha L. Teichmann |
Added caching support for the wst value tables.
|
| Fri, 29 Apr 2011 16:56:37 +0000 |
Sascha L. Teichmann |
Added ehcache support.
|
| Fri, 29 Apr 2011 15:10:44 +0000 |
Sascha L. Teichmann |
Added meta data service.
|
| Fri, 29 Apr 2011 14:39:42 +0000 |
Sascha L. Teichmann |
Added meta service stub. TODO: Add meta data builder.
|
| Fri, 29 Apr 2011 13:06:49 +0000 |
Ingo Weinzierl |
Bugfix: Changed the datastructure of the ThemeList (inner class of FLYSArtifactCollection) to store the theme of a chart in an ordered list -> Q curves of longitudinal section charts are now drawn.
|
| Fri, 29 Apr 2011 10:13:24 +0000 |
Ingo Weinzierl |
Implemented the chart creation of a longitudinal section chart - W and Q facets.
|
| Fri, 29 Apr 2011 10:02:59 +0000 |
Ingo Weinzierl |
Improved the calculation of the step width of ranges.
|
| Fri, 29 Apr 2011 10:01:41 +0000 |
Ingo Weinzierl |
New method WQKms.size() to retrieve the number of elements in the data pool.
|
| Fri, 29 Apr 2011 08:39:17 +0000 |
Sascha L. Teichmann |
WQKms model: Added a get() method which takes destination array as an argument.
|
| Fri, 29 Apr 2011 08:28:44 +0000 |
Ingo Weinzierl |
Introduced GNU Trove to store WQKms values in a more performant data structure.
|
| Fri, 29 Apr 2011 08:13:56 +0000 |
Ingo Weinzierl |
Added the name of the facet to the parameterlist of OutGenerator.doOut().
|
| Fri, 29 Apr 2011 08:02:54 +0000 |
Ingo Weinzierl |
Added themes and mappings for the W and Q theme of a longitudinal section curve.
|
| Fri, 29 Apr 2011 07:46:27 +0000 |
Ingo Weinzierl |
Added necessary methods to start the computation of waterlevel data.
|
| Fri, 29 Apr 2011 07:27:05 +0000 |
Ingo Weinzierl |
Introduced a model class to store a set of triple data objects that consist of W, Q and Kms information.
|
| Fri, 29 Apr 2011 07:22:25 +0000 |
Ingo Weinzierl |
Bugfix: Removed endless loop and a bug while iterating over Hibernate results.
|
| Thu, 28 Apr 2011 12:54:11 +0000 |
Ingo Weinzierl |
Added an OutGenerator for creating longitudinal section curves.
|
| Thu, 28 Apr 2011 12:23:40 +0000 |
Ingo Weinzierl |
Bugfix: Added missing <output-generators> section to the global configuration.
|
| Thu, 28 Apr 2011 11:32:41 +0000 |
Ingo Weinzierl |
Added a further state that is reached if the waterlevel calculation mode has been chosen.
|
| Thu, 28 Apr 2011 11:22:45 +0000 |
Ingo Weinzierl |
Added a new Transition to compare values.
|
| Thu, 28 Apr 2011 11:20:11 +0000 |
Ingo Weinzierl |
Bugfixes: Adapted a broken method call of TransitionEngine.isStateReachable() and added the outputs of a current state to the DESCRIBE.
|
| Thu, 28 Apr 2011 11:16:21 +0000 |
Ingo Weinzierl |
Bugfix: Added the missing init() method to a Transition and call it in the TransitionFactory after a Transition has been created.
|
| Thu, 28 Apr 2011 11:13:06 +0000 |
Ingo Weinzierl |
Bugfix: The outputs of a Collection's attribute document are stored in an outputs node now instead of being stored toplevel in the document.
|
| Thu, 28 Apr 2011 11:08:34 +0000 |
Ingo Weinzierl |
Throw an illegal argument exception in LocationDistanceSelect.validate() and WQSelect.validate() if no data has been inserted so far.
|
| Thu, 28 Apr 2011 09:09:44 +0000 |
Sascha L. Teichmann |
Added XSL transformation do create Graphviz digraph out of conf.xml
|
| Thu, 28 Apr 2011 08:14:20 +0000 |
Ingo Weinzierl |
The OutGenerator gets the theme of a facet while output creation.
|
| Wed, 27 Apr 2011 14:42:52 +0000 |
Ingo Weinzierl |
Removed useless imports.
|
| Wed, 27 Apr 2011 14:40:44 +0000 |
Ingo Weinzierl |
Added an abstract OutGenerator that should be the base class for all generators which create charts.
|
| Wed, 27 Apr 2011 14:35:44 +0000 |
Ingo Weinzierl |
Improved the out() operation of a Collection - the OutGenerator gets to know about the facets and its theme.
|
| Tue, 26 Apr 2011 13:29:18 +0000 |
Ingo Weinzierl |
The Attributes of a collection are written into its DESCRIBE now.
|
| Tue, 26 Apr 2011 13:17:08 +0000 |
Ingo Weinzierl |
Initialized the facet2theme mappings configured in themes.xml and added a function to the ThemeFactory that retrieves a theme from FLYSContext based on its name.
|
| Fri, 22 Apr 2011 15:49:35 +0000 |
Sascha L. Teichmann |
Corrected a silly c&p mistake.
|
| Fri, 22 Apr 2011 09:57:27 +0000 |
Sascha L. Teichmann |
Implementation of the "Ruecksprungkorrektur" to be done in "W fuer angepassten Abflusslaengschnitt".
|
| Thu, 21 Apr 2011 08:49:58 +0000 |
Ingo Weinzierl |
Removed debug code that has been commited by accident.
|
| Thu, 21 Apr 2011 08:47:39 +0000 |
Ingo Weinzierl |
Added a first small theme configuration and code to read it.
|
| Thu, 21 Apr 2011 08:44:41 +0000 |
Ingo Weinzierl |
Implementation of interfaces and its default implementations and a factory to work with themes.
|
| Wed, 20 Apr 2011 14:26:51 +0000 |
Sascha L. Teichmann |
Implementation of "Abflusskurve/Abflusstafel" calculation.
|
