log artifacts/doc/conf/meta-data.xml @ 8243:0a994bbe645e

age author description
Tue, 09 Sep 2014 10:53:50 +0200 Tom Gottfried Suggestion: Load official epochs via recommendations instead of a pseudo-calculation.
Mon, 08 Sep 2014 15:54:12 +0200 Tom Gottfried Let official epochs be showy and remove detritus of 'yields' in datacage config.
Mon, 08 Sep 2014 10:03:00 +0200 Tom Gottfried Allow fractions without SQ-time interval (suspended sediment) to be loaded.
Tue, 02 Sep 2014 14:46:20 +0200 Tom Gottfried Make sedimentload loadable as old calculation.
Mon, 01 Sep 2014 09:43:55 +0200 Tom Gottfried Handle missing years in bed height differences without assuming an unknown year to be BC 1.
Thu, 28 Aug 2014 12:00:52 +0200 Tom Gottfried Quoting is done elsewhere since rev 7021753b3797.
Tue, 26 Aug 2014 17:16:21 +0200 Tom Gottfried With the exception of real calculation results, descriptions of sediment loads can all follow the same pattern.
Tue, 26 Aug 2014 12:09:18 +0200 Tom Gottfried Metadata in datacage tooltips for sediment densities, bed heights, flow velocities and sounding widhts.
Fri, 22 Aug 2014 18:00:35 +0200 Tom Gottfried Tooltip for sediment loads in datacage.
Fri, 22 Aug 2014 17:43:36 +0200 Tom Gottfried Add SQ time interval to selection tree in datacage for sediment loads.
Fri, 22 Aug 2014 13:19:02 +0200 Tom Gottfried Remove code duplications in sedimentload datacage.
Fri, 22 Aug 2014 08:04:43 +0200 Tom Gottfried Format timestamps in datacage tooltip for porosities.
Wed, 20 Aug 2014 17:47:58 +0200 Tom Gottfried Reconstruct facet description of sediment load longitudinal sections. i18n will follow.
Wed, 20 Aug 2014 17:07:17 +0200 Tom Gottfried Reconstruct facet description of sediment load at measurement stations. i18n will follow.
Wed, 20 Aug 2014 12:12:18 +0200 Andre Heinecke Remove todos about sedimentload_ls facet
Wed, 20 Aug 2014 12:10:32 +0200 Andre Heinecke Configure SedimentLoadLSFacet
Tue, 19 Aug 2014 18:46:13 +0200 Tom Gottfried Distinction by measurement station gives lots of duplicates, as we always get a whole longitudinal section.
Fri, 15 Aug 2014 18:24:55 +0200 Andre Heinecke Change sedimentload factory from yields to loads.
Fri, 08 Aug 2014 13:24:11 +0200 Tom Gottfried Datacage config for new sediment load structures. Missing: some facets and everything down from the innermost macros for sediment load at measurement stations.
Wed, 06 Aug 2014 19:17:12 +0200 Tom Gottfried SCHEMA CHANGE: rename database tables from yield to load_ls according to respective classes.
Tue, 08 Jul 2014 18:19:04 +0200 Tom Gottfried merged default into branch facet-metadata. facet-metadata
Thu, 03 Jul 2014 16:36:43 +0200 Tom Gottfried Allow differences between years and epochs (accidentally did that in branch facet-metadata already too)
Thu, 03 Jul 2014 16:34:28 +0200 Tom Gottfried Allow differences between years and epochs. facet-metadata
Thu, 03 Jul 2014 12:30:41 +0200 Raimund Renkert Added macro for middle bedheights for old calculations. facet-metadata
Fri, 27 Jun 2014 18:47:55 +0200 Tom Gottfried Exclude annotation types without trailing unit (assumed after whitespace).
Fri, 27 Jun 2014 15:52:05 +0200 Tom Gottfried Minor cleanup in meta-data.xml.
Fri, 27 Jun 2014 15:10:10 +0200 Raimund Renkert Select complete differences matrix to have a well sorted dc-tree.
Fri, 27 Jun 2014 09:50:46 +0200 Raimund Renkert Fixed datacage info field for bed height differences.
Thu, 26 Jun 2014 14:54:04 +0200 Raimund Renkert Updated macros and db statement for minfo bedheight differences.
Fri, 20 Jun 2014 16:52:14 +0200 Sascha L. Teichmann DC: Flatten bed height diff tree a bit.
Fri, 20 Jun 2014 16:41:30 +0200 Sascha L. Teichmann DC: Group bedheight diffs by both years.
Fri, 20 Jun 2014 16:33:09 +0200 Raimund Renkert New macros for bed height differneces.
Wed, 18 Jun 2014 15:30:39 +0200 Sascha L. Teichmann Datacage: Moved year filtering of bed heights to separate macro to be reusable in other contextes.
Tue, 10 Jun 2014 12:51:08 +0200 Raimund Renkert Removed bed differences epoch from datacage.
Fri, 06 Jun 2014 17:02:03 +0200 Raimund Renkert Removed datacage macro calls for bed height epochs.
Wed, 04 Jun 2014 12:22:01 +0200 Tom Gottfried Allow differentiating between units of sediment sources/sinks in annotation types also in datacage.
Fri, 30 May 2014 15:46:53 +0200 Tom Gottfried issue661: prototyped tooltip for porosities in datacage.
Fri, 16 May 2014 13:17:29 +0200 Raimund Renkert Use description from database for i18n (completed revision dc8910e29dd4).
Wed, 30 Apr 2014 15:29:50 +0200 Raimund Renkert merged.
Wed, 30 Apr 2014 15:26:44 +0200 Raimund Renkert New macro for porosities in datacage config.
Thu, 17 Apr 2014 11:42:12 +0200 Tom Gottfried Merged minfo-opt branch into default.
Thu, 06 Mar 2014 17:30:59 +0100 Tom Gottfried Remove not publicly available WMS services and enable custom configuration through release script.
Thu, 06 Mar 2014 14:10:00 +0100 Raimund Renkert Fixed datacage macro for winfo differences and added the new facet. minfo-opt
Tue, 17 Dec 2013 14:43:26 +0100 Andre Heinecke (issue1581) Remove Minfo-heights from differencable
Mon, 09 Dec 2013 09:56:01 +0100 Felix Wolfsteller issue1020: Show official lines in datacage to compute uesks, too.
Fri, 06 Dec 2013 16:47:02 +0100 Andre Heinecke (issue1474) Change order of measurement stations
Fri, 06 Dec 2013 14:51:48 +0100 Tom Gottfried Order by years in SQ-relation datacage.
Fri, 06 Dec 2013 14:27:03 +0100 Tom Gottfried Order by year in sediment yield datacage.
Fri, 06 Dec 2013 13:58:27 +0100 Tom Gottfried Add sources/sinks to sediment yield datacage.
Fri, 06 Dec 2013 13:17:05 +0100 Tom Gottfried Add recommendations for bed quality and flow velocity.
Fri, 06 Dec 2013 12:10:24 +0100 Felix Wolfsteller issue1691: Sedimentload-fetching via datacage now picks right facet.
Mon, 02 Dec 2013 10:08:23 +0100 Felix Wolfsteller issue1579: Load those official lines automatically.
Mon, 02 Dec 2013 09:48:48 +0100 Felix Wolfsteller issue1579: Added macro to load interpolated official lines.
Mon, 18 Nov 2013 12:30:36 +0100 Felix Wolfsteller issue1613: In DC, also show the 'diff' facets, define former calc. for hist. W/Q out.
Mon, 18 Nov 2013 12:22:22 +0100 Felix Wolfsteller issue1631: Allow loading of some former historical-discharge facets.
Thu, 14 Nov 2013 11:58:51 +0100 Felix Wolfsteller issue1020: Display more waterlevels for uesk.
Tue, 12 Nov 2013 16:54:18 +0100 Sascha L. Teichmann Previous fix for flys/issue1675 was broken. :-/
Tue, 12 Nov 2013 15:37:38 +0100 Sascha L. Teichmann Workaround for flys/issue1675: Guarantee that the years are always between 0 and 9999 in macro 'minfo-heights'.
Wed, 06 Nov 2013 12:07:48 +0100 Felix Wolfsteller issue1664: Let DC instruct StaticWKmsArtifact to spawn facets
Fri, 01 Nov 2013 15:05:35 +0100 Sascha L. Teichmann Datacage: Removed macro "delta-wt-ls" from meta-data.xml as it is not used. 3.0.17
Fri, 01 Nov 2013 12:12:24 +0100 Felix Wolfsteller meta-data.xml: Removed junk.
Fri, 01 Nov 2013 12:11:59 +0100 Felix Wolfsteller issue1571: Exclude vollmer curves from general longitudinal dc folder.
Fri, 01 Nov 2013 11:13:38 +0100 Felix Wolfsteller issue1571: Hav eown folder in dc for vollmer curves.
Thu, 31 Oct 2013 11:44:09 +0100 Felix Wolfsteller issue1657: Adjust DC conf to spawn sounding widths.
Wed, 30 Oct 2013 16:04:06 +0100 Felix Wolfsteller issue1345: Add flow_velocities folder.
Wed, 30 Oct 2013 15:02:16 +0100 Felix Wolfsteller issue1512: Fix loading of all former flow vel. calculation via folder.
Wed, 30 Oct 2013 14:53:26 +0100 Felix Wolfsteller issue1512: Show all flowvelocity facet in former calc. flow vel. part of dc.
Wed, 30 Oct 2013 12:03:07 +0100 Felix Wolfsteller issue1572: Call longitudinal-section-user-prototype for bedheight-diffs/year.
Tue, 29 Oct 2013 11:32:56 +0100 Felix Wolfsteller issue1397: Fix reference_curve former calculations in dc.
Tue, 29 Oct 2013 10:42:12 +0100 Felix Wolfsteller issue1512: Repair loading all of flowvelocitymeasurements by not equipping
Mon, 28 Oct 2013 12:14:46 +0100 Felix Wolfsteller issue1345: Sort sediment densities by year.
Mon, 28 Oct 2013 11:52:14 +0100 Felix Wolfsteller meta-data.xml: Simplify query for densities a bit, sort by depth.
Fri, 25 Oct 2013 14:29:38 +0200 Felix Wolfsteller meta-data.xml: Include bedheight-diffs per year in minfo-user-dc.
Fri, 25 Oct 2013 14:10:29 +0200 Felix Wolfsteller meta-data.xml: Subsume the different bed-quality dc-nodes.
Fri, 25 Oct 2013 13:52:47 +0200 Felix Wolfsteller meta-data.xml: Ease i18nability.
Fri, 25 Oct 2013 07:25:19 +0200 Felix Wolfsteller meta-data.xml: Remove duplicates and 'special' macros fro special outs from
Fri, 25 Oct 2013 07:24:15 +0200 Felix Wolfsteller meta-data.xml: Remove delta-wt from longitudinal-section-user-prototype .
Wed, 23 Oct 2013 17:45:56 +0200 Felix Wolfsteller Partly revert rev 7419, conservative guess about which "outs" are handcrafted.
Wed, 23 Oct 2013 17:20:30 +0200 Felix Wolfsteller issue1345: Re-enable sediment load total loads, now that factory is fixed.
Wed, 23 Oct 2013 17:08:07 +0200 Felix Wolfsteller issue1345: Showing sediment densitie by depth, comment total load.
Wed, 23 Oct 2013 14:53:47 +0200 Tom Gottfried Fix typo.
Wed, 23 Oct 2013 12:43:26 +0200 Andre Heinecke (issue965) Handle the case that diffids are not available
Wed, 23 Oct 2013 12:09:36 +0200 Felix Wolfsteller meta-data.xml: Be less restrictive in showing facets from waterlevels-discharge.
Wed, 23 Oct 2013 12:08:30 +0200 Felix Wolfsteller meta-data.xml: Exclude empty.facet s.
Wed, 23 Oct 2013 12:07:35 +0200 Felix Wolfsteller meta-meta.xml: Also fetch extreme_base curves via dc.
Wed, 23 Oct 2013 12:07:05 +0200 Felix Wolfsteller meta-data.xml: cosmetics.
Wed, 23 Oct 2013 11:33:31 +0200 Felix Wolfsteller meta-data.xml: Cosmetics.
Wed, 23 Oct 2013 11:22:47 +0200 Felix Wolfsteller meta-data.xml: More usage of collection-group-macro.
Wed, 23 Oct 2013 11:28:25 +0200 Sascha L. Teichmann Datacage: Consequently call macro 'longitudinal-section-user-prototype' in all longitudinal sections of old calculation. Moved asymmeterical stuff to prototype. This may crash!
Wed, 23 Oct 2013 11:04:06 +0200 Felix Wolfsteller meta-data.xml: Create and use collection-group macro.
Tue, 22 Oct 2013 15:51:33 +0200 Felix Wolfsteller meta-data.xml: Switch more longitudinal-section like user-dc content to prototype macro.
Tue, 22 Oct 2013 15:43:13 +0200 Sascha L. Teichmann Datacage: Fixed macro call.
Tue, 22 Oct 2013 15:34:51 +0200 Sascha L. Teichmann Fixed meta-data.xml
Tue, 22 Oct 2013 12:21:21 +0200 Felix Wolfsteller issue1512: Sort flow-velocity-models by discharge_zone.value.
Tue, 22 Oct 2013 12:15:33 +0200 Felix Wolfsteller issue1473: Show differences project name in dc.
Tue, 22 Oct 2013 11:57:17 +0200 Felix Wolfsteller meta-data.xml: Fix referenced out for discharge_longitudinal_section.
Mon, 21 Oct 2013 19:05:41 +0200 Andre Heinecke (issue965) Add a comment to explain what we do here
Mon, 21 Oct 2013 18:57:30 +0200 Andre Heinecke (issue965) Use new datacage magic to have year filtering for bedheights
Mon, 21 Oct 2013 12:21:40 +0200 Felix Wolfsteller issue1521: Adhere more to dc 'spec', show discharges of flow velocity models.
Thu, 17 Oct 2013 09:40:12 +0200 Felix Wolfsteller meta-data.xml: cleanup longitudinal-section-user-prototype, removing dupes.
Thu, 17 Oct 2013 07:42:31 +0200 Felix Wolfsteller issue1473: Let vollmer curves appear under 'former calc/waterlevels from fix.'.
Wed, 16 Oct 2013 18:48:02 +0200 Andre Heinecke Use more failsave pattern for SQ-facets.
Wed, 16 Oct 2013 15:22:18 +0200 Felix Wolfsteller Offer total loads in dc.
Wed, 16 Oct 2013 11:45:23 +0200 Andre Heinecke (issue1474) Add sqrelation user data and disable filtering for it
Wed, 16 Oct 2013 11:42:53 +0200 Andre Heinecke Add debug output for variables in user context
Tue, 15 Oct 2013 15:37:54 +0200 Felix Wolfsteller Add aforementioned user-prototype.
Tue, 15 Oct 2013 15:37:24 +0200 Felix Wolfsteller Prototypically add longitudinal-section-user-prototype, with issues.
Tue, 15 Oct 2013 15:06:29 +0200 Felix Wolfsteller issue1345: Show bedheight_type in tooltip.
Tue, 15 Oct 2013 15:03:51 +0200 Felix Wolfsteller issue1345: Bring back waterlevel/diffs from fixation into minfo dc element.
Tue, 15 Oct 2013 14:41:39 +0200 Felix Wolfsteller Fix DC group-by statement, there is no 'oid' variable around.
Tue, 15 Oct 2013 07:06:19 +0200 Felix Wolfsteller issue1345: DC: group bed heights of single years by year.
Mon, 14 Oct 2013 07:33:32 +0200 Felix Wolfsteller Comment in meta-data.xml.
Fri, 11 Oct 2013 12:26:00 +0200 Felix Wolfsteller issue1345: include fix for display of epochs stoptime.
Fri, 11 Oct 2013 12:22:40 +0200 Felix Wolfsteller issue1512: Adde flow-velocity-models dc conf.
Thu, 10 Oct 2013 11:27:56 +0200 Felix Wolfsteller issue1345: Factored out description creation for loads. Make epochs show end time.
Thu, 10 Oct 2013 11:22:16 +0200 Felix Wolfsteller issue1345: Added macro for the differing epoch-description, extended query.
Thu, 10 Oct 2013 11:19:30 +0200 Felix Wolfsteller issue1345: Minor refactoring, made structure for epoch loads equal year loads.
Thu, 10 Oct 2013 11:10:50 +0200 Felix Wolfsteller issue1345: Show fraction and year for sediment load dc subtree.
Thu, 10 Oct 2013 09:49:01 +0200 Felix Wolfsteller Revert 7273, add undefined macro to meta-data.xml.
Wed, 09 Oct 2013 17:56:39 +0200 Tom Gottfried Remove annotations from reference curve recommendations. There is no km-axis.
Wed, 09 Oct 2013 16:33:56 +0200 Sascha L. Teichmann DC: Remove accidentaly used user-macro from system-content part.
Wed, 09 Oct 2013 16:20:33 +0200 Sascha L. Teichmann Removed calls to undefined macro.
Wed, 09 Oct 2013 16:19:13 +0200 Sascha L. Teichmann Removed duplicate macro.
Wed, 09 Oct 2013 12:46:40 +0200 Tom Gottfried fixed typo.
Wed, 09 Oct 2013 11:20:06 +0200 Felix Wolfsteller meta-data.xml: Add more entries to discharge datacage ('user-part').
Wed, 09 Oct 2013 10:03:00 +0200 Felix Wolfsteller meta-data.xml: Let DC show (yet all) computed discharge curves as former calculations.
Wed, 09 Oct 2013 10:01:00 +0200 Felix Wolfsteller meta-data.xml: Refactored discharge-curve-prototype.
Wed, 09 Oct 2013 09:57:49 +0200 Felix Wolfsteller meta-data.xml: Add a macro to load previous discharge calculations.
Wed, 02 Oct 2013 17:04:23 +0200 Andre Heinecke (issue1474) Add datacage loading for SQ Relations
Fri, 04 Oct 2013 12:16:37 +0200 Felix Wolfsteller Removed TODO which was already done.
Fri, 04 Oct 2013 11:59:26 +0200 Felix Wolfsteller issue1345: call longitudinal-section-prototype macro for flow-veloc. DC. Added todo.
Fri, 04 Oct 2013 11:37:50 +0200 Felix Wolfsteller issue 1345: Let sediment-load dc-config call longitdunal-section-prototype macro.
Fri, 04 Oct 2013 11:11:48 +0200 Felix Wolfsteller issue1345: Also let bed-quality use longitudinal-section-prototype.
Fri, 04 Oct 2013 10:52:07 +0200 Felix Wolfsteller issue1345: adjust dc-conf for befheight-diffs: is now longitudinal-section-prototype.
Fri, 04 Oct 2013 07:49:21 +0200 Felix Wolfsteller issue1345: meta-data.xml: For bedheight_middle, use the longitudinal-section-prototype.
Wed, 02 Oct 2013 14:14:09 +0200 Felix Wolfsteller meta-meta.xml: remove debugging info content.
Wed, 02 Oct 2013 14:13:19 +0200 Felix Wolfsteller issue1345: add flowvelocity-macro to winfo longitudinal-section.
Wed, 02 Oct 2013 11:44:23 +0200 Felix Wolfsteller issue1435: DC layout for sediment-loads more the way its requested.
Tue, 01 Oct 2013 10:01:00 +0200 Felix Wolfsteller issue1435: Add bedheights and morph. width to LS DC conf.
Mon, 30 Sep 2013 17:33:29 +0200 Felix Wolfsteller issue1435: Call densities-macro of meta-data.xml thus show densities in datacage.
Mon, 30 Sep 2013 17:32:47 +0200 Felix Wolfsteller issue1435: Add densities-macro to meta-data.xml .
Fri, 27 Sep 2013 22:09:12 +0200 Felix Wolfsteller issue1435: Remove hardcoded river for dc sediment yield sql query.
Fri, 27 Sep 2013 16:13:54 +0200 Felix Wolfsteller issue1435: In DC conf, show sedimentyields in yield/[year|epoch]- structure, i18n.
Fri, 27 Sep 2013 14:42:03 +0200 Felix Wolfsteller issue1435: meta-data.xml: Add sedimentload/yield- part to minfo part of dc.
Thu, 26 Sep 2013 19:14:37 +0200 Andre Heinecke Fix wrong usage of a_id and add more datacage stuff to WSPL longitundinal
Thu, 26 Sep 2013 17:31:25 +0200 Tom Gottfried Filter waterleveldifferences according to unit.
Thu, 26 Sep 2013 16:18:55 +0200 Tom Gottfried Filter prefix of descriptions of MINFO-WSTs.
Thu, 26 Sep 2013 16:17:36 +0200 Tom Gottfried Move MINFO-fixation-stuff to MINFO-datacage and give specified names.
Thu, 26 Sep 2013 13:56:54 +0200 Felix Wolfsteller issue1435: Group minfo-stuff in dc, include waterlevels from csv.
Mon, 16 Sep 2013 15:45:51 +0200 Andre Heinecke Fix syntax error on oracle by removing unused paramater
Thu, 12 Sep 2013 10:13:09 +0200 Tom Gottfried merged accidental head (nothing changed)
Tue, 10 Sep 2013 15:22:59 +0200 Felix Wolfsteller issue1378: For additionals and basedata via datacage for
Wed, 21 Aug 2013 11:12:39 +0200 Felix Wolfsteller issue1378 (part): Make DC config for discharge curve offer correct
Fri, 16 Aug 2013 11:30:07 +0200 Andre Heinecke (issue1391): Build the current discarge curve name as requested
Fri, 16 Aug 2013 09:39:27 +0200 Andre Heinecke (issue1391) Filter by reference_gauge or by KM
Thu, 08 Aug 2013 17:36:44 +0200 Tom Gottfried merged changes from default into longitudinal-symmetry branch longitudinal-symmetry
Wed, 07 Aug 2013 18:57:29 +0200 Tom Gottfried merged changes from default into longitudinal-symmetrie branch longitudinal-symmetry
Wed, 07 Aug 2013 18:53:15 +0200 Tom Gottfried merge changes from default into longitudinal-symmetrie branch and make it build longitudinal-symmetry
Thu, 08 Aug 2013 12:06:54 +0200 Felix Wolfsteller offer differences for bedheight-diffs in dc, and bedheight diffs in ls.
Wed, 07 Aug 2013 18:24:07 +0200 Andre Heinecke Remove accidentally commited debug output
Thu, 01 Aug 2013 15:16:32 +0200 Felix Wolfsteller meta-data.xml/DC: Automatically add annotations to middle bed height diagrams.
Tue, 30 Jul 2013 19:14:49 +0200 Andre Heinecke issue1391: Some more unification fix km filtering for calculated discharges 3.0.13
Mon, 29 Jul 2013 17:27:48 +0200 Andre Heinecke Fix syntax error
Mon, 29 Jul 2013 12:16:12 +0200 Andre Heinecke issue1391: Unify datacage elements in discharge curve outs and add historical discharges
Mon, 29 Jul 2013 12:14:51 +0200 Andre Heinecke issue1391: Fix syntax in gauge macros and add km filtering
Thu, 25 Jul 2013 07:22:28 +0200 Felix Wolfsteller fix issue1412: make vollmer-curves functional in middle bedheight diagrams.
Thu, 25 Jul 2013 07:12:51 +0200 Felix Wolfsteller meta-data.xml: Partly fix a filter expression (unclodes literal).
Wed, 24 Jul 2013 19:03:33 +0200 Andre Heinecke Cast ld values to varchar in user artifacts statement
Wed, 24 Jul 2013 18:20:16 +0200 Andre Heinecke Add zero padding to minutes and seconds of a_creation times
Wed, 24 Jul 2013 17:34:48 +0200 Andre Heinecke Add some useful debug output.
Wed, 24 Jul 2013 17:24:02 +0200 Tom Gottfried fixed statement for floodplains in datacage-config (with Andre's eyes)
Wed, 24 Jul 2013 10:50:43 +0200 Felix Wolfsteller Collapse overly complicated dc-filter-statement for vollmer-curves.
Wed, 24 Jul 2013 10:41:21 +0200 Andre Heinecke Remove duplicated discharge_table_gauge macros and calls
Wed, 24 Jul 2013 10:18:33 +0200 Andre Heinecke Unify duplicated fix-wq-curve case
Sat, 29 Jun 2013 00:06:35 +0200 Tom Gottfried Backed out changeset 1a7f5d09b9d8
Fri, 19 Jul 2013 13:52:35 +0200 Felix Wolfsteller issue1395: Show bedheight diffs in w-diff datacage.
Thu, 18 Jul 2013 15:44:31 +0200 Felix Wolfsteller Do not show beddifferences in dc that lets select for differences.
Thu, 18 Jul 2013 13:12:39 +0200 Andre Heinecke Mark staticwqkms that are loaded as officiallines recommendation as official
Thu, 18 Jul 2013 12:37:08 +0200 Felix Wolfsteller issue1395: Renamed bedheight-differences macro, call it from wdiff DC context.
Thu, 18 Jul 2013 12:20:02 +0200 Felix Wolfsteller issue1395: Use correct out name in DC for bedheight-diffs.
Thu, 18 Jul 2013 10:28:32 +0200 Felix Wolfsteller issue1396: Fix (at least partly) the loading of new differences via dc.
Wed, 17 Jul 2013 15:11:37 +0200 Felix Wolfsteller issue1394: Prevent display of empty paths in DC tree (vollmer and waterlevels).
Wed, 17 Jul 2013 12:10:23 +0200 Felix Wolfsteller issue1394: meta-data.xml: Add DC-Config for (pseudo-)out "differenceable".
Tue, 16 Jul 2013 10:00:34 +0200 Felix Wolfsteller Fix cloning of old MINFO/Beddiff-calculations.
Mon, 15 Jul 2013 06:33:51 +0200 Felix Wolfsteller Show (csv-)waterlevel in beddiff-datacages.
Fri, 28 Jun 2013 21:08:23 +0200 Tom Gottfried Longitudinal sections: partly renamed outs and configured recommendations at once
Fri, 28 Jun 2013 13:37:00 +0200 Sascha L. Teichmann added recommendation for official lines in cross sections
Wed, 26 Jun 2013 22:28:42 +0200 Raimund Renkert Call official lines macro in system context and fixed the macro.
Wed, 26 Jun 2013 15:15:14 +0200 Raimund Renkert Enabled basedata datacage in fix analysis ls.
Sat, 22 Jun 2013 00:03:18 +0200 Sascha L. Teichmann Datacage: Rewrote the loading of the official lines based on the latest changes. Untested!
Tue, 18 Jun 2013 13:25:52 +0200 Raimund Renkert Add annotations to sediment load chart.
Thu, 13 Jun 2013 10:01:01 +0200 Andre Heinecke Add location handling in waterlevels-fix macro
Wed, 12 Jun 2013 18:21:48 +0200 Sascha L. Teichmann Artifacts: Comment out broken official lines loading from datacage.
Wed, 12 Jun 2013 10:34:43 +0200 Andre Heinecke Add date format for artifact creation time
Wed, 12 Jun 2013 10:13:55 +0200 Andre Heinecke Add km range to description of waterlevels for issue565
Tue, 11 Jun 2013 16:41:16 +0200 Andre Heinecke Add non recommendations for bed_difference_height_year
Mon, 10 Jun 2013 10:57:14 +0200 Andre Heinecke Fix accidental mistake in group expression of some waterlevels
Mon, 10 Jun 2013 10:54:24 +0200 Andre Heinecke Fix uesk description for issue 770
Thu, 06 Jun 2013 18:08:27 +0200 Raimund Renkert Added wsts with kind=6 (delta W ls) to datacage config.
Thu, 06 Jun 2013 13:26:34 +0200 Raimund Renkert I999: Filter epochs ands single years in datacage config.
Tue, 04 Jun 2013 16:04:08 +0200 Andre Heinecke Simplify and fix range filtering for server data.
Wed, 29 May 2013 09:22:11 +0200 Andre Heinecke Add target_out attribute to elements with a factory
Mon, 27 May 2013 15:40:42 +0200 Andre Heinecke Commit changes described in r6110
Mon, 27 May 2013 15:36:56 +0200 Andre Heinecke Fix datacage for user data by adding facet filtering.
Sat, 25 May 2013 16:18:28 +0200 Sascha L. Teichmann Datacage: Another variable access fix.
Sat, 25 May 2013 16:11:49 +0200 Sascha L. Teichmann Datacage: Fixed wrong variable access in meta-data.xml
Fri, 24 May 2013 18:53:05 +0200 Andre Heinecke First part of the filtering datacage for user data.
Fri, 24 May 2013 10:06:58 +0200 Andre Heinecke We want to expand the group key for the name
Fri, 24 May 2013 09:22:10 +0200 Andre Heinecke Fix old calculations datacage parts.
Thu, 23 May 2013 14:54:50 +0200 Felix Wolfsteller issue954/2: Flood- Protections in Cross-Sections Datacage.
Thu, 23 May 2013 11:59:01 +0200 Felix Wolfsteller meta-data.xml: dc:has-result()-guard additionals and basedata.
Thu, 23 May 2013 11:23:54 +0200 Felix Wolfsteller meta-data.xml: Wrap user-content in user-range to use 'range intelligence'.
Thu, 23 May 2013 11:22:34 +0200 Felix Wolfsteller meta-data.xml: Fix test syntax.
Thu, 23 May 2013 11:21:58 +0200 Felix Wolfsteller meta-data.xml: Fix query, select on user-id not collection-id.
Thu, 23 May 2013 11:18:51 +0200 Felix Wolfsteller meta-data.xml: Make a select a bit more human-resolvable.
Tue, 21 May 2013 18:36:32 +0200 Andre Heinecke Readd accidentally removed macros
Tue, 21 May 2013 18:00:29 +0200 Andre Heinecke Commit meta-data.xml refactoring
Thu, 16 May 2013 16:19:47 +0200 Felix Wolfsteller In relation to issue1081: let there be mainvalues in discharge_curve dc.
Thu, 16 May 2013 08:58:59 +0200 Felix Wolfsteller Part of issue1081: Show mainvalues in discharge_curve dc.
Thu, 16 May 2013 17:48:20 +0200 Andre Heinecke Do not use from and to as variables in statement.
Wed, 15 May 2013 12:40:13 +0200 Felix Wolfsteller Part of issue1149: Load main values for w/q diagram.
Tue, 14 May 2013 18:01:16 +0200 Felix Wolfsteller issue977/2: supply mainvalues via dc for reference curve.
Tue, 14 May 2013 18:55:55 +0200 Andre Heinecke Use the out attribute everywhere where there is a factory 3.0.4
Mon, 13 May 2013 11:20:08 +0200 Felix Wolfsteller issue949: meta-data.xml: for additional ls, use staticwqkms factory to have w

http://dive4elements.wald.intevation.org