log flys-artifacts/doc/conf/artifacts/winfo.xml @ 2178:1d7fb2cabfc7

age author description
Fri, 27 Jan 2012 07:53:03 +0000 Raimund Renkert Issue 138.
Thu, 26 Jan 2012 16:53:42 +0000 Raimund Renkert Issue 138.
Thu, 26 Jan 2012 15:38:46 +0000 Raimund Renkert Issue 138.
Thu, 26 Jan 2012 13:12:19 +0000 Felix Wolfsteller Render manual points in longitudinal sections.
Wed, 25 Jan 2012 15:12:07 +0000 Sascha L. Teichmann Transition/States: Removed superfluous condition checks.
Wed, 25 Jan 2012 14:14:33 +0000 Sascha L. Teichmann Added transition/state stubs for "Bezugslinienverfahren".
Mon, 23 Jan 2012 14:18:53 +0000 Felix Wolfsteller Theoretically allow annotations on second y ais. Practically allow Q MainValues on Q Axis in Duration Curves.
Wed, 18 Jan 2012 13:29:41 +0000 Felix Wolfsteller Add hyk facet to compatibility list of winfo.xml
Mon, 16 Jan 2012 13:29:10 +0000 Felix Wolfsteller Added certain facets to compatibility matrix.
Tue, 20 Dec 2011 11:26:24 +0000 Felix Wolfsteller Cosmetics, renamed facet type.
Tue, 20 Dec 2011 06:39:20 +0000 Felix Wolfsteller Added theme defaults for areas, added facets to compatibility matrices.
Fri, 16 Dec 2011 14:53:53 +0000 Felix Wolfsteller Added area facets to cross section compatibility matrix.
Mon, 05 Dec 2011 09:33:20 +0000 Felix Wolfsteller Allow longitudinal_section.q facets in wdiff states output.
Tue, 22 Nov 2011 20:04:46 +0000 Ingo Weinzierl Added a new Artifact to enable users to add external WMS layers to floodmaps.
Thu, 17 Nov 2011 11:38:16 +0000 Felix Wolfsteller Added interpolated wkms to compatibility matrix for computed discharge curve diagrams.
Wed, 16 Nov 2011 15:46:11 +0000 Felix Wolfsteller Extended compatibility matrices.
Thu, 10 Nov 2011 14:25:56 +0000 Ingo Weinzierl Added new WMSFixpointsArtifact for displaying fixpoints in maps.
Thu, 10 Nov 2011 13:54:24 +0000 Ingo Weinzierl Added new WMSBuildingsArtifact for displaying buildings in maps.
Thu, 10 Nov 2011 13:40:05 +0000 Ingo Weinzierl Added new WMSLineArtifact for displaying lines in maps.
Thu, 10 Nov 2011 10:29:01 +0000 Felix Wolfsteller Made Discharge Longitudinal Section out compatible with Annotations.
Wed, 09 Nov 2011 16:49:58 +0000 Ingo Weinzierl Added new WMSFloodplainArtifact for displaying floodplains in maps.
Wed, 09 Nov 2011 16:28:29 +0000 Ingo Weinzierl Added new WMSCatchmentArtifact for displaying catchments in maps.
Wed, 09 Nov 2011 16:07:07 +0000 Ingo Weinzierl Added new WMSHwsArtifact for displaying flood protection works.
Wed, 09 Nov 2011 12:38:02 +0000 Felix Wolfsteller Allow wqkms in many outputs, mainvalues in duration curves.
Fri, 04 Nov 2011 14:09:05 +0000 Ingo Weinzierl Added datacage configuration, loader (Artifact and State) and a theme for cross section tracks.
Wed, 02 Nov 2011 13:41:39 +0000 Felix Wolfsteller Apply point theme to heightmark data imported via datacage to longitudinal section diagram.
Wed, 02 Nov 2011 11:12:08 +0000 Felix Wolfsteller Configured discharge curve outs to allow inclusion of mainvalue facets.
Tue, 01 Nov 2011 14:54:59 +0000 Ingo Weinzierl Added datacage config and loaders for KM WMS layer in floodmaps.
Fri, 28 Oct 2011 13:48:02 +0000 Ingo Weinzierl Enabled the MapGenerator to create WMS layers with database datastore - riveraxis is the first layer that is no longer fetched from static WMS service but from user specific one.
Fri, 28 Oct 2011 10:20:00 +0000 Felix Wolfsteller Add annotations to allowed facets for longitudinal_section and w_differences outputs.
Fri, 28 Oct 2011 08:36:32 +0000 Ingo Weinzierl Improved the MapfileGenerator. It offers methods to create barrier and wsplgen layer files for mapserver.
Wed, 26 Oct 2011 12:42:20 +0000 Felix Wolfsteller Adjusted winfo.xml to new semantics.
Wed, 12 Oct 2011 10:21:59 +0000 Felix Wolfsteller Fix remainder of flys/issue304 (Erweiterte Funktionen W-Differenzen).
Wed, 21 Sep 2011 13:03:54 +0000 Ingo Weinzierl #315 Added new state for entering a kilometer range without step width.
Thu, 15 Sep 2011 07:39:36 +0000 Felix Wolfsteller Extended WDifferences bracnh of WINFO to have calculation in dedicated,
Wed, 14 Sep 2011 14:58:06 +0000 Ingo Weinzierl Prepared the winfo artifact for floodmap calculations (now selectable in the UI).
Mon, 12 Sep 2011 09:06:05 +0000 Felix Wolfsteller Added CSV Exporter for WDifferences.
Fri, 09 Sep 2011 12:29:28 +0000 Felix Wolfsteller Fix facet name and legend of w-differences, walk over distance state, too.
Fri, 09 Sep 2011 10:13:22 +0000 Felix Wolfsteller Added configuration to kick-in w-differences branch of winfo.
Thu, 08 Sep 2011 14:42:36 +0000 Ingo Weinzierl Added an Output target for WSPLGEN reports that will be available when an WSPLGEN calculation is finished.
Thu, 01 Sep 2011 12:15:46 +0000 Felix Wolfsteller Get real (but yet not parameterized) data to display in CrossSection.
Wed, 31 Aug 2011 10:24:49 +0000 Felix Wolfsteller Added dummy sceleton for Cross Sections.
Wed, 24 Aug 2011 08:22:09 +0000 Ingo Weinzierl Moved the input of user defined barriers for the floodmap to an earlier state.
Mon, 22 Aug 2011 10:40:15 +0000 Ingo Weinzierl Prepared the FloodMapState to save geometries.
Wed, 13 Jul 2011 10:29:32 +0000 Ingo Weinzierl Introduced a new output 'floodmap' for the FloodMapState.
Wed, 06 Jul 2011 13:41:36 +0000 Ingo Weinzierl Removed a type from transition model.
Tue, 05 Jul 2011 15:34:54 +0000 Ingo Weinzierl Enhanced the transition model to continue the parameterization in the waterlevel state to compute flood maps.
Thu, 30 Jun 2011 11:32:17 +0000 Ingo Weinzierl #159 Modifications in the transition model to support a state with a kilometer range input only.
Thu, 23 Jun 2011 17:22:17 +0000 Sascha L. Teichmann Added generation and configuration of AT facets.
Thu, 23 Jun 2011 08:58:30 +0000 Sascha L. Teichmann Corrected configuration for error reports.
Wed, 22 Jun 2011 10:36:27 +0000 Sascha L. Teichmann Improved situtation on rendering "Abflusskurve am Pegel". Not fully working, yet.
Wed, 22 Jun 2011 09:19:16 +0000 Sascha L. Teichmann Generate facets for "Abflusskurven am Pegel". Not working by now. :-/
Mon, 20 Jun 2011 14:36:42 +0000 Sascha L. Teichmann Configured states to generate report facets.
Fri, 17 Jun 2011 16:17:03 +0000 Sascha L. Teichmann Merged revisions 2127-2133,2136-2137,2140,2143-2144,2146,2150-2151,2153-2154 via svnmerge from
Fri, 17 Jun 2011 14:37:09 +0000 Sascha L. Teichmann Generate data facets for the computed states. facets-slt
Fri, 17 Jun 2011 13:00:54 +0000 Ingo Weinzierl Added a parameter 'wq_free' that determines that mode of calculation 1 (specifies if the calculation is bound to a gauge or not).
Fri, 17 Jun 2011 12:38:41 +0000 Ingo Weinzierl DischargeLongitudinalSectionCurve will have corrected W facets now.
Thu, 16 Jun 2011 10:05:44 +0000 Ingo Weinzierl Generated facets for each output aspect. facets-slt
Tue, 24 May 2011 12:37:45 +0000 Ingo Weinzierl ISSUE-85 (part III/III) Use the given kilometer values for the waterlevel computation.
Wed, 18 May 2011 10:59:38 +0000 Ingo Weinzierl Enabled the discharge longitudinal section to be exported as WST.
Tue, 17 May 2011 16:31:07 +0000 Ingo Weinzierl Implemented writer that creates WSTs and enabled the WaterlevelExporter to create those.
Mon, 09 May 2011 09:55:47 +0000 Ingo Weinzierl Added a CSV exporter for the discharge longitudinal section computation.
Fri, 06 May 2011 14:19:27 +0000 Ingo Weinzierl Implemented methods to retrieve and compute the data used to create discharge longitudinal sections.
Thu, 05 May 2011 06:12:44 +0000 Ingo Weinzierl Improved the transition model and added states to enable the 'discharge longitudinal section' computation - NOTE: the work in this computation has not finished yet.
Wed, 04 May 2011 07:48:39 +0000 Ingo Weinzierl Improved the transition model and added classes to enable the WINFO artifact to create computed discharge curves - NOTE: each of the new classes is just a stub.
Tue, 03 May 2011 17:37:56 +0000 Ingo Weinzierl Added an exporter to export the computed data of a duration curve.
Tue, 03 May 2011 16:36:21 +0000 Ingo Weinzierl Added an exporter (OutGenerator) for waterlevels which currently supports CSV exports.
Mon, 02 May 2011 16:58:04 +0000 Ingo Weinzierl Enhanced the transition model to reach a state that creates duration curves.
Mon, 02 May 2011 15:17:04 +0000 Ingo Weinzierl Enabled the FLYSArtifact to handle an array of inserted WQ values (without given ranges).
Thu, 28 Apr 2011 11:32:41 +0000 Ingo Weinzierl Added a further state that is reached if the waterlevel calculation mode has been chosen.
Wed, 30 Mar 2011 15:21:12 +0000 Ingo Weinzierl Enhanced the output mode for discharge curves with three facets.
Wed, 30 Mar 2011 08:22:30 +0000 Ingo Weinzierl Renamed an output mode in the WINFO artifact configuration.
Tue, 22 Mar 2011 16:09:30 +0000 Ingo Weinzierl The location_distance state of the WINFO parameterization has an output mode 'discharge_table' now.
Fri, 18 Mar 2011 09:42:21 +0000 Ingo Weinzierl Added new states to insert location/distance and w/q data in the config of a WINFO artifact.
Mon, 14 Mar 2011 15:47:10 +0000 Ingo Weinzierl Introduced a state to select the calculation mode.
Mon, 07 Feb 2011 17:42:14 +0000 Ingo Weinzierl The input data items of a state are read from configuration after the state has been setup.
Fri, 04 Feb 2011 11:18:59 +0000 Ingo Weinzierl Improved the init process of the WINFOArtifact - there are two new states to select the river and the gauge.
Thu, 03 Feb 2011 10:23:30 +0000 Ingo Weinzierl Initializes a TransitionEngine storing all transitions for each artifact at the application start.
Wed, 02 Feb 2011 14:56:22 +0000 Ingo Weinzierl Added a first stub of an WINFO artifact.

http://dive4elements.wald.intevation.org