| Fri, 29 Apr 2011 07:22:25 +0000 |
Ingo Weinzierl |
Bugfix: Removed endless loop and a bug while iterating over Hibernate results.
|
| Thu, 28 Apr 2011 12:54:11 +0000 |
Ingo Weinzierl |
Added an OutGenerator for creating longitudinal section curves.
|
| Thu, 28 Apr 2011 12:23:40 +0000 |
Ingo Weinzierl |
Bugfix: Added missing <output-generators> section to the global configuration.
|
| Thu, 28 Apr 2011 11:32:41 +0000 |
Ingo Weinzierl |
Added a further state that is reached if the waterlevel calculation mode has been chosen.
|
| Thu, 28 Apr 2011 11:22:45 +0000 |
Ingo Weinzierl |
Added a new Transition to compare values.
|
| Thu, 28 Apr 2011 11:20:11 +0000 |
Ingo Weinzierl |
Bugfixes: Adapted a broken method call of TransitionEngine.isStateReachable() and added the outputs of a current state to the DESCRIBE.
|
| Thu, 28 Apr 2011 11:16:21 +0000 |
Ingo Weinzierl |
Bugfix: Added the missing init() method to a Transition and call it in the TransitionFactory after a Transition has been created.
|
| Thu, 28 Apr 2011 11:13:06 +0000 |
Ingo Weinzierl |
Bugfix: The outputs of a Collection's attribute document are stored in an outputs node now instead of being stored toplevel in the document.
|
| Thu, 28 Apr 2011 11:08:34 +0000 |
Ingo Weinzierl |
Throw an illegal argument exception in LocationDistanceSelect.validate() and WQSelect.validate() if no data has been inserted so far.
|
| Thu, 28 Apr 2011 09:09:44 +0000 |
Sascha L. Teichmann |
Added XSL transformation do create Graphviz digraph out of conf.xml
|
| Thu, 28 Apr 2011 08:14:20 +0000 |
Ingo Weinzierl |
The OutGenerator gets the theme of a facet while output creation.
|
| Wed, 27 Apr 2011 14:42:52 +0000 |
Ingo Weinzierl |
Removed useless imports.
|
| Wed, 27 Apr 2011 14:40:44 +0000 |
Ingo Weinzierl |
Added an abstract OutGenerator that should be the base class for all generators which create charts.
|
| Wed, 27 Apr 2011 14:35:44 +0000 |
Ingo Weinzierl |
Improved the out() operation of a Collection - the OutGenerator gets to know about the facets and its theme.
|
| Tue, 26 Apr 2011 13:29:18 +0000 |
Ingo Weinzierl |
The Attributes of a collection are written into its DESCRIBE now.
|
| Tue, 26 Apr 2011 13:17:08 +0000 |
Ingo Weinzierl |
Initialized the facet2theme mappings configured in themes.xml and added a function to the ThemeFactory that retrieves a theme from FLYSContext based on its name.
|
| Fri, 22 Apr 2011 15:49:35 +0000 |
Sascha L. Teichmann |
Corrected a silly c&p mistake.
|
| Fri, 22 Apr 2011 09:57:27 +0000 |
Sascha L. Teichmann |
Implementation of the "Ruecksprungkorrektur" to be done in "W fuer angepassten Abflusslaengschnitt".
|
| Thu, 21 Apr 2011 08:49:58 +0000 |
Ingo Weinzierl |
Removed debug code that has been commited by accident.
|
| Thu, 21 Apr 2011 08:47:39 +0000 |
Ingo Weinzierl |
Added a first small theme configuration and code to read it.
|
| Thu, 21 Apr 2011 08:44:41 +0000 |
Ingo Weinzierl |
Implementation of interfaces and its default implementations and a factory to work with themes.
|
| Wed, 20 Apr 2011 14:26:51 +0000 |
Sascha L. Teichmann |
Implementation of "Abflusskurve/Abflusstafel" calculation.
|
| Wed, 20 Apr 2011 13:13:19 +0000 |
Sascha L. Teichmann |
Added dependency to Apache Commons Math 2.2 (Apache License 2.0)
|
| Wed, 20 Apr 2011 09:46:40 +0000 |
Sascha L. Teichmann |
Discharge table: Fix problem when sorting by q (copied w instead of q).
|
| Wed, 20 Apr 2011 08:00:38 +0000 |
Ingo Weinzierl |
Fixed broken HQL statement.
|
| Tue, 19 Apr 2011 17:43:39 +0000 |
Sascha L. Teichmann |
Implemented the "Wasserstand/Wasserspiegellagen" calculation.
|
| Tue, 19 Apr 2011 17:37:21 +0000 |
Sascha L. Teichmann |
Discharge table: we need a getQForW() and not a getWForQ().
|
| Tue, 19 Apr 2011 14:48:28 +0000 |
Sascha L. Teichmann |
Discharge tables: Sorting of q values was done wrong.
|
| Tue, 19 Apr 2011 13:10:27 +0000 |
Ingo Weinzierl |
The list of annotations returned by the AnnotationFactory is ordered by its range.
|
| Tue, 19 Apr 2011 12:33:39 +0000 |
Ingo Weinzierl |
Added a service that returns the MainValues of a Gauge based on a river name and a stationing.
|
| Tue, 19 Apr 2011 12:31:07 +0000 |
Ingo Weinzierl |
Added a factory that returns MainValues.
|
| Tue, 19 Apr 2011 11:05:27 +0000 |
Sascha L. Teichmann |
Discharge table: Added static method getWForQ() to interpolate a w value for a given q value based on a given discharge table.
|
| Tue, 19 Apr 2011 10:32:31 +0000 |
Sascha L. Teichmann |
Discharge tables: Added convenience constructors/methods to ease the access to the master discharge table of a gauge.
|
| Mon, 18 Apr 2011 16:01:23 +0000 |
Sascha L. Teichmann |
Moved the query complexity of creating a w/q value table into view
|
| Mon, 18 Apr 2011 14:40:35 +0000 |
Sascha L. Teichmann |
Fetches w/q value tables from the backend.
|
| Mon, 18 Apr 2011 13:23:12 +0000 |
Ingo Weinzierl |
Changed the error key that is written to the result document of the feed operation.
|
| Mon, 18 Apr 2011 13:21:52 +0000 |
Ingo Weinzierl |
The inserted river is validated in the feed operation().
|
| Mon, 18 Apr 2011 13:00:57 +0000 |
Ingo Weinzierl |
The calculation method is validated in the feed() operation.
|
| Mon, 18 Apr 2011 12:36:08 +0000 |
Ingo Weinzierl |
The inserted ranges (distance and WQ ranges) are validated in the feed() operation.
|
| Mon, 18 Apr 2011 09:34:18 +0000 |
Ingo Weinzierl |
Removed testing code that has been comitted by accident in the last revision.
|
| Mon, 18 Apr 2011 07:39:17 +0000 |
Ingo Weinzierl |
The getGauge() method of the FLYSArtifact returns the first gauge based on the given stationing now.
|
| Fri, 15 Apr 2011 13:47:10 +0000 |
Ingo Weinzierl |
The WQ state fills the DESCRIBE with default values for W and Q.
|
| Fri, 15 Apr 2011 13:46:22 +0000 |
Ingo Weinzierl |
Added a WstFactory to return Wst objects.
|
| Fri, 15 Apr 2011 13:37:51 +0000 |
Ingo Weinzierl |
FLYSArtifact provides methods to retrieve the real River, Gauge objects.
|
| Fri, 15 Apr 2011 10:10:37 +0000 |
Ingo Weinzierl |
Bugfix: repaired broken imports of the session holder.
|
| Fri, 15 Apr 2011 09:52:37 +0000 |
Ingo Weinzierl |
Removed the SessionHolder and adapted imports.
|
| Thu, 14 Apr 2011 13:45:50 +0000 |
Sascha L. Teichmann |
Acquire/release sessions in services to avoid db connection leaks.
|
| Thu, 14 Apr 2011 13:36:06 +0000 |
Ingo Weinzierl |
The location/distance state now writes default values into DESCRIBE.
|
| Thu, 14 Apr 2011 13:26:29 +0000 |
Ingo Weinzierl |
Added a new function to RiverFactory that retrieves a River object based on a given river name.
|
| Thu, 14 Apr 2011 13:15:16 +0000 |
Sascha L. Teichmann |
Backend access: Static methods are using the SessionHolder, too.
|
| Thu, 14 Apr 2011 13:11:12 +0000 |
Ingo Weinzierl |
Finalized the SessionCallContextListener and registered it as CallContext.Listener in the configuration.
|
| Thu, 14 Apr 2011 12:59:21 +0000 |
Ingo Weinzierl |
Bugfix: Call correct method to retrieve and initialize an instance of SessionFactoryProvider.
|
| Thu, 14 Apr 2011 12:08:47 +0000 |
Sascha L. Teichmann |
Added a session holder to hold hibernate sessions.
|
| Thu, 14 Apr 2011 11:18:28 +0000 |
Ingo Weinzierl |
Added an Implementation of CallContext.Listener to open/close Hibernate Sessions for each request.
|
| Thu, 14 Apr 2011 08:32:18 +0000 |
Ingo Weinzierl |
Modified the states' describe() method - related to the last commit.
|
| Thu, 14 Apr 2011 08:23:15 +0000 |
Ingo Weinzierl |
Removed the state to explicitly select a gauge.
|
| Wed, 13 Apr 2011 08:31:20 +0000 |
Ingo Weinzierl |
Bugfix: Repaired the dynamic UI part of the RiverSelect state in DESCRIBE.
|
| Tue, 12 Apr 2011 13:42:14 +0000 |
Ingo Weinzierl |
Write the name of an artifact into the DESCRIBE document.
|
| Tue, 12 Apr 2011 07:49:36 +0000 |
Ingo Weinzierl |
Bugfix: States are filled with data before they describe themself.
|
| Mon, 11 Apr 2011 12:54:03 +0000 |
Ingo Weinzierl |
Implemented a service that retrieves distance information for a specific river.
|
| Wed, 06 Apr 2011 10:01:49 +0000 |
Ingo Weinzierl |
The FLYSArtifactCollection overrides out() and uses OutGenerators to create output for this operation.
|
| Wed, 06 Apr 2011 09:56:38 +0000 |
Ingo Weinzierl |
Added a DischargeCurveGenerator that creates discharge curves.
|
| Wed, 06 Apr 2011 09:53:14 +0000 |
Ingo Weinzierl |
Changed the visibility of getData() method of FLYSArtifacts.
|
| Sun, 03 Apr 2011 10:55:16 +0000 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
| Sun, 03 Apr 2011 10:53:14 +0000 |
Sascha L. Teichmann |
Make project compilable again.
|
| Thu, 31 Mar 2011 10:56:08 +0000 |
Ingo Weinzierl |
Added code to parse the configured OutGenerators in the global configuration and to save a map of such in the FLYSContext.
|
| Thu, 31 Mar 2011 10:54:07 +0000 |
Ingo Weinzierl |
Added an OutGenerator interface that might be used to generator collected outputs of a set of artifacts.
|
| Wed, 30 Mar 2011 16:00:51 +0000 |
Ingo Weinzierl |
Removed the Backend reference from FLYSArtifactCollection.
|
| Wed, 30 Mar 2011 15:21:12 +0000 |
Ingo Weinzierl |
Enhanced the output mode for discharge curves with three facets.
|
| Wed, 30 Mar 2011 13:47:02 +0000 |
Ingo Weinzierl |
Tagged RELEASE 0.1 of FLYS Artifacts.
|
| Wed, 30 Mar 2011 08:22:30 +0000 |
Ingo Weinzierl |
Renamed an output mode in the WINFO artifact configuration.
|
| Tue, 29 Mar 2011 13:57:25 +0000 |
Ingo Weinzierl |
Changed a german string in the resource bundle.
|
| Tue, 29 Mar 2011 09:54:06 +0000 |
Ingo Weinzierl |
Adapted the available calculation modes of WINFO and its order in the DESCRIBE document.
|
| Mon, 28 Mar 2011 16:58:17 +0000 |
Ingo Weinzierl |
Added the hash code of an artifact to the artifact part of the collection's DESCRIBE document.
|
| Mon, 28 Mar 2011 16:36:13 +0000 |
Ingo Weinzierl |
Changed the background color of discharge curves to white.
|
| Mon, 28 Mar 2011 15:21:27 +0000 |
Sascha L. Teichmann |
DischargeTables: Cache the scale, too. Otherwise two calls to getValues() with different arguments will result in the same output.
|
| Mon, 28 Mar 2011 14:33:36 +0000 |
Ingo Weinzierl |
The out() operation of the WINFO artifact draws discharge tables for gauges specified by the user.
|
| Mon, 28 Mar 2011 10:48:27 +0000 |
Ingo Weinzierl |
Added a helper class to export charts.
|
| Mon, 28 Mar 2011 09:17:25 +0000 |
Sascha L. Teichmann |
Add factory to fetch gauges from database and filter them
|
| Fri, 25 Mar 2011 13:51:09 +0000 |
Sascha L. Teichmann |
Don't used interleaved x/y data.
|
| Fri, 25 Mar 2011 11:03:51 +0000 |
Ingo Weinzierl |
Updated the TODO list.
|
| Fri, 25 Mar 2011 10:23:59 +0000 |
Ingo Weinzierl |
Bugfix: Added a missing artifact namespace prefix in the DESCRIBE document of a FLYSArtifactCollection.
|
| Thu, 24 Mar 2011 18:47:07 +0000 |
Ingo Weinzierl |
Implemented a FLYSArtifactCollection that will be used in this application now.
|
| Thu, 24 Mar 2011 17:29:08 +0000 |
Sascha L. Teichmann |
Fetch w/q values of discharge tables for given gauges.
|
| Thu, 24 Mar 2011 17:06:08 +0000 |
Ingo Weinzierl |
Added a further german resource bundle.
|
| Wed, 23 Mar 2011 10:52:01 +0000 |
Ingo Weinzierl |
The DESCRIBE of the WINFO artifact contains the available output modes now.
|
| Tue, 22 Mar 2011 16:09:30 +0000 |
Ingo Weinzierl |
The location_distance state of the WINFO parameterization has an output mode 'discharge_table' now.
|
| Mon, 21 Mar 2011 09:18:04 +0000 |
Ingo Weinzierl |
Append human readable strings of the selected values to the DESCRIBE output.
|
| Mon, 21 Mar 2011 09:16:17 +0000 |
Ingo Weinzierl |
Added some more calculation types (to the DESCRIBE in the calculation select state).
|
| Mon, 21 Mar 2011 08:17:15 +0000 |
Ingo Weinzierl |
Implemented the step-back part of the advance() operation.
|
| Mon, 21 Mar 2011 06:11:01 +0000 |
Ingo Weinzierl |
Fixed a german umlaut.
|
| Fri, 18 Mar 2011 09:42:21 +0000 |
Ingo Weinzierl |
Added new states to insert location/distance and w/q data in the config of a WINFO artifact.
|
| Fri, 18 Mar 2011 09:38:11 +0000 |
Ingo Weinzierl |
Added a new state for the W/Q input in the WINFO parameterization.
|
| Fri, 18 Mar 2011 08:50:42 +0000 |
Ingo Weinzierl |
New state for the location/distance input and some litte modifications of the DefaultState.
|
| Thu, 17 Mar 2011 16:37:39 +0000 |
Ingo Weinzierl |
Added a method to retrieve the UIProvider for a state.
|
| Thu, 17 Mar 2011 16:03:36 +0000 |
Ingo Weinzierl |
Let the states describe the static ui part.
|
| Thu, 17 Mar 2011 12:17:37 +0000 |
Ingo Weinzierl |
The 'rivers' service retrieves the rivers from backend now.
|
| Thu, 17 Mar 2011 11:46:43 +0000 |
Sascha L. Teichmann |
Added support for the flys backend and an example how to use it.
|
| Tue, 15 Mar 2011 17:12:58 +0000 |
Sascha L. Teichmann |
Added section in configuration for database backend.
|
| Tue, 15 Mar 2011 15:53:02 +0000 |
Sascha L. Teichmann |
Fixed build error coming from different import of XMLUtils.
|
| Mon, 14 Mar 2011 17:43:52 +0000 |
Ingo Weinzierl |
Appended a missing node to the DESCRIBE.
|
| Mon, 14 Mar 2011 16:32:42 +0000 |
Ingo Weinzierl |
I18N of strings for the DESCRIBE document.
|
| Mon, 14 Mar 2011 15:47:10 +0000 |
Ingo Weinzierl |
Introduced a state to select the calculation mode.
|
| Mon, 14 Mar 2011 15:43:12 +0000 |
Ingo Weinzierl |
Added an abstract base class DefaultState for States.
|
| Mon, 14 Mar 2011 14:16:37 +0000 |
Ingo Weinzierl |
Implemented a singleton instance that provides i18n strings.
|
| Thu, 10 Mar 2011 13:31:36 +0000 |
Ingo Weinzierl |
Appende the static data to the static node of the DESCRIBE document.
|
| Thu, 10 Mar 2011 08:38:05 +0000 |
Ingo Weinzierl |
The operations feed() and advance() return the current description of the artifact now.
|
| Thu, 10 Mar 2011 05:56:17 +0000 |
Ingo Weinzierl |
Implemented the step-forward part of the advance operation.
|
| Wed, 09 Mar 2011 14:13:57 +0000 |
Ingo Weinzierl |
Implemented the feed() operation.
|
| Wed, 09 Mar 2011 14:07:03 +0000 |
Ingo Weinzierl |
Added a TODO file.
|
| Wed, 09 Mar 2011 11:29:07 +0000 |
Ingo Weinzierl |
Added a FLYSArtifact that serves as the default artifact for the FLYS application.
|
| Tue, 08 Mar 2011 17:22:37 +0000 |
Ingo Weinzierl |
Added a RiverService (/service/rivers) that retrieves a list of provided rivers.
|
| Mon, 07 Mar 2011 14:43:14 +0000 |
Ingo Weinzierl |
Added a nodes for the user-factory and collection-factory to the configuration.
|
| Tue, 01 Mar 2011 17:18:08 +0000 |
Ingo Weinzierl |
Replaced the 'special' attribute of the DESCRIBE with a 'uiprovider' attribute.
|
| Tue, 08 Feb 2011 09:11:25 +0000 |
Ingo Weinzierl |
The RiverSelect state creates the dynamic UI part for the describe document now.
|
| Tue, 08 Feb 2011 09:02:18 +0000 |
Ingo Weinzierl |
Added mockup classes for working with rivers.
|
| Mon, 07 Feb 2011 17:42:14 +0000 |
Ingo Weinzierl |
The input data items of a state are read from configuration after the state has been setup.
|
| Mon, 07 Feb 2011 11:37:33 +0000 |
Ingo Weinzierl |
Added the current state and reachable states description to the describe document of the WINFO artifact.
|
| Mon, 07 Feb 2011 11:32:59 +0000 |
Ingo Weinzierl |
Changed the way of storing transitions in the TransitionEngine.
|
| Fri, 04 Feb 2011 16:57:08 +0000 |
Ingo Weinzierl |
Improved the WINFO artifact. Describe() returns the uuid and the hash of the artifact instead of just nothing.
|
