Wed, 09 Nov 2011 16:28:29 +0000 |
Ingo Weinzierl |
Added new WMSCatchmentArtifact for displaying catchments in maps.
|
Wed, 09 Nov 2011 16:07:07 +0000 |
Ingo Weinzierl |
Added new WMSHwsArtifact for displaying flood protection works.
|
Wed, 09 Nov 2011 12:38:02 +0000 |
Felix Wolfsteller |
Allow wqkms in many outputs, mainvalues in duration curves.
|
Fri, 04 Nov 2011 14:09:05 +0000 |
Ingo Weinzierl |
Added datacage configuration, loader (Artifact and State) and a theme for cross section tracks.
|
Wed, 02 Nov 2011 13:41:39 +0000 |
Felix Wolfsteller |
Apply point theme to heightmark data imported via datacage to longitudinal section diagram.
|
Wed, 02 Nov 2011 11:12:08 +0000 |
Felix Wolfsteller |
Configured discharge curve outs to allow inclusion of mainvalue facets.
|
Tue, 01 Nov 2011 14:54:59 +0000 |
Ingo Weinzierl |
Added datacage config and loaders for KM WMS layer in floodmaps.
|
Fri, 28 Oct 2011 13:48:02 +0000 |
Ingo Weinzierl |
Enabled the MapGenerator to create WMS layers with database datastore - riveraxis is the first layer that is no longer fetched from static WMS service but from user specific one.
|
Fri, 28 Oct 2011 10:20:00 +0000 |
Felix Wolfsteller |
Add annotations to allowed facets for longitudinal_section and w_differences outputs.
|
Fri, 28 Oct 2011 08:36:32 +0000 |
Ingo Weinzierl |
Improved the MapfileGenerator. It offers methods to create barrier and wsplgen layer files for mapserver.
|
Wed, 26 Oct 2011 12:42:20 +0000 |
Felix Wolfsteller |
Adjusted winfo.xml to new semantics.
|
Wed, 12 Oct 2011 10:21:59 +0000 |
Felix Wolfsteller |
Fix remainder of flys/issue304 (Erweiterte Funktionen W-Differenzen).
|
Wed, 21 Sep 2011 13:03:54 +0000 |
Ingo Weinzierl |
#315 Added new state for entering a kilometer range without step width.
|
Thu, 15 Sep 2011 07:39:36 +0000 |
Felix Wolfsteller |
Extended WDifferences bracnh of WINFO to have calculation in dedicated,
|
Wed, 14 Sep 2011 14:58:06 +0000 |
Ingo Weinzierl |
Prepared the winfo artifact for floodmap calculations (now selectable in the UI).
|
Mon, 12 Sep 2011 09:06:05 +0000 |
Felix Wolfsteller |
Added CSV Exporter for WDifferences.
|
Fri, 09 Sep 2011 12:29:28 +0000 |
Felix Wolfsteller |
Fix facet name and legend of w-differences, walk over distance state, too.
|
Fri, 09 Sep 2011 10:13:22 +0000 |
Felix Wolfsteller |
Added configuration to kick-in w-differences branch of winfo.
|
Thu, 08 Sep 2011 14:42:36 +0000 |
Ingo Weinzierl |
Added an Output target for WSPLGEN reports that will be available when an WSPLGEN calculation is finished.
|
Thu, 01 Sep 2011 12:15:46 +0000 |
Felix Wolfsteller |
Get real (but yet not parameterized) data to display in CrossSection.
|
Wed, 31 Aug 2011 10:24:49 +0000 |
Felix Wolfsteller |
Added dummy sceleton for Cross Sections.
|
Wed, 24 Aug 2011 08:22:09 +0000 |
Ingo Weinzierl |
Moved the input of user defined barriers for the floodmap to an earlier state.
|
Mon, 22 Aug 2011 10:40:15 +0000 |
Ingo Weinzierl |
Prepared the FloodMapState to save geometries.
|
Wed, 13 Jul 2011 10:29:32 +0000 |
Ingo Weinzierl |
Introduced a new output 'floodmap' for the FloodMapState.
|
Wed, 06 Jul 2011 13:41:36 +0000 |
Ingo Weinzierl |
Removed a type from transition model.
|
Tue, 05 Jul 2011 15:34:54 +0000 |
Ingo Weinzierl |
Enhanced the transition model to continue the parameterization in the waterlevel state to compute flood maps.
|
Thu, 30 Jun 2011 11:32:17 +0000 |
Ingo Weinzierl |
#159 Modifications in the transition model to support a state with a kilometer range input only.
|
Thu, 23 Jun 2011 17:22:17 +0000 |
Sascha L. Teichmann |
Added generation and configuration of AT facets.
|
Thu, 23 Jun 2011 08:58:30 +0000 |
Sascha L. Teichmann |
Corrected configuration for error reports.
|
Wed, 22 Jun 2011 10:36:27 +0000 |
Sascha L. Teichmann |
Improved situtation on rendering "Abflusskurve am Pegel". Not fully working, yet.
|
Wed, 22 Jun 2011 09:19:16 +0000 |
Sascha L. Teichmann |
Generate facets for "Abflusskurven am Pegel". Not working by now. :-/
|
Mon, 20 Jun 2011 14:36:42 +0000 |
Sascha L. Teichmann |
Configured states to generate report facets.
|
Fri, 17 Jun 2011 16:17:03 +0000 |
Sascha L. Teichmann |
Merged revisions 2127-2133,2136-2137,2140,2143-2144,2146,2150-2151,2153-2154 via svnmerge from
|
Fri, 17 Jun 2011 14:37:09 +0000 |
Sascha L. Teichmann |
Generate data facets for the computed states.
facets-slt
|
Fri, 17 Jun 2011 13:00:54 +0000 |
Ingo Weinzierl |
Added a parameter 'wq_free' that determines that mode of calculation 1 (specifies if the calculation is bound to a gauge or not).
|
Fri, 17 Jun 2011 12:38:41 +0000 |
Ingo Weinzierl |
DischargeLongitudinalSectionCurve will have corrected W facets now.
|
Thu, 16 Jun 2011 10:05:44 +0000 |
Ingo Weinzierl |
Generated facets for each output aspect.
facets-slt
|
Tue, 24 May 2011 12:37:45 +0000 |
Ingo Weinzierl |
ISSUE-85 (part III/III) Use the given kilometer values for the waterlevel computation.
|
Wed, 18 May 2011 10:59:38 +0000 |
Ingo Weinzierl |
Enabled the discharge longitudinal section to be exported as WST.
|
Tue, 17 May 2011 16:31:07 +0000 |
Ingo Weinzierl |
Implemented writer that creates WSTs and enabled the WaterlevelExporter to create those.
|
Mon, 09 May 2011 09:55:47 +0000 |
Ingo Weinzierl |
Added a CSV exporter for the discharge longitudinal section computation.
|
Fri, 06 May 2011 14:19:27 +0000 |
Ingo Weinzierl |
Implemented methods to retrieve and compute the data used to create discharge longitudinal sections.
|
Thu, 05 May 2011 06:12:44 +0000 |
Ingo Weinzierl |
Improved the transition model and added states to enable the 'discharge longitudinal section' computation - NOTE: the work in this computation has not finished yet.
|
Wed, 04 May 2011 07:48:39 +0000 |
Ingo Weinzierl |
Improved the transition model and added classes to enable the WINFO artifact to create computed discharge curves - NOTE: each of the new classes is just a stub.
|
Tue, 03 May 2011 17:37:56 +0000 |
Ingo Weinzierl |
Added an exporter to export the computed data of a duration curve.
|
Tue, 03 May 2011 16:36:21 +0000 |
Ingo Weinzierl |
Added an exporter (OutGenerator) for waterlevels which currently supports CSV exports.
|
Mon, 02 May 2011 16:58:04 +0000 |
Ingo Weinzierl |
Enhanced the transition model to reach a state that creates duration curves.
|
Mon, 02 May 2011 15:17:04 +0000 |
Ingo Weinzierl |
Enabled the FLYSArtifact to handle an array of inserted WQ values (without given ranges).
|
Thu, 28 Apr 2011 11:32:41 +0000 |
Ingo Weinzierl |
Added a further state that is reached if the waterlevel calculation mode has been chosen.
|
Wed, 30 Mar 2011 15:21:12 +0000 |
Ingo Weinzierl |
Enhanced the output mode for discharge curves with three facets.
|
Wed, 30 Mar 2011 08:22:30 +0000 |
Ingo Weinzierl |
Renamed an output mode in the WINFO artifact configuration.
|
Tue, 22 Mar 2011 16:09:30 +0000 |
Ingo Weinzierl |
The location_distance state of the WINFO parameterization has an output mode 'discharge_table' now.
|
Fri, 18 Mar 2011 09:42:21 +0000 |
Ingo Weinzierl |
Added new states to insert location/distance and w/q data in the config of a WINFO artifact.
|
Mon, 14 Mar 2011 15:47:10 +0000 |
Ingo Weinzierl |
Introduced a state to select the calculation mode.
|
Mon, 07 Feb 2011 17:42:14 +0000 |
Ingo Weinzierl |
The input data items of a state are read from configuration after the state has been setup.
|
Fri, 04 Feb 2011 11:18:59 +0000 |
Ingo Weinzierl |
Improved the init process of the WINFOArtifact - there are two new states to select the river and the gauge.
|
Thu, 03 Feb 2011 10:23:30 +0000 |
Ingo Weinzierl |
Initializes a TransitionEngine storing all transitions for each artifact at the application start.
|
Wed, 02 Feb 2011 14:56:22 +0000 |
Ingo Weinzierl |
Added a first stub of an WINFO artifact.
|