log flys-artifacts/doc/conf/artifacts/winfo.xml @ 4837:9e25c7523485

age author description
2012-11-13 Felix Wolfsteller winfo.xml: Add cross-section facets and out to extreme state.
2012-11-05 Felix Wolfsteller winfo.xml: Add wst and pdf Facets to extremes compat list.
2012-11-05 Felix Wolfsteller winfo.xml: Add extreme_curve_export outputmode and csv facet to its compat list.
2012-11-05 Felix Wolfsteller winfo.xml: Add error ('report') outputmode to extreme_wq_curve out, and compat for reportfacet.
2012-11-02 Felix Wolfsteller winfo.xml: Add new extreme_wq_curve_base to compat of extreme_wq_curve out.
2012-11-01 Felix Wolfsteller winfo.xml: Change extreme wq-out from fix_wq_curve to (new) extreme_wq_curve.
2012-10-30 Felix Wolfsteller winfo.xml: Add fix_wq_curve output mode and extreme_wq_curve compatibility to extreme state.
2012-10-24 Ingo Weinzierl Improved the historical discharge calculation.
2012-10-24 Ingo Weinzierl Implemented the Q evaluation mode for historical discharge calculations.
2012-10-12 Felix Wolfsteller Include state and transition for q input per segment for extreme value analysis.
2012-10-08 Felix Wolfsteller Added Percentage-Input state to extreme value analysis state model.
2012-10-08 Felix Wolfsteller Dummy state model for extreme value analysis.
2012-07-23 Felix Wolfsteller Commit accidentally ommitted cosmetic in winfo.xml.
2012-06-27 Felix Wolfsteller Added compatibility and theme for upcoming manual line facet.
2012-06-19 Felix Wolfsteller Extend compatibility list of facets for discharge-curves.
2012-05-24 Felix Wolfsteller Precised DC config.
2012-05-24 Felix Wolfsteller Add relativepoint to compatibility list of reference curve out.
2012-05-23 Felix Wolfsteller Polish: theme for relativepoint, removal of wrong facet in compatibility list.
2012-05-23 Felix Wolfsteller Added (dummy-) implementation of relative point facet in staticwkms case.
2012-05-23 Felix Wolfsteller Cosmetics in winfo state xml.
2012-05-22 Felix Wolfsteller Add cross-section output to dischargelong.section.
2012-05-22 Felix Wolfsteller Added skeleton for gauge discharge curves.
2012-05-10 Ingo Weinzierl Added support for WMS gauges in floodmaps and maps.
2012-05-10 Ingo Weinzierl Improved datacage configuration for floodmaps and maps and modified the WMS layer artifacts to support names for layers.
2012-05-03 Ingo Weinzierl Added 'helpText' fields to the transition model.
2012-04-25 Raimund Renkert Issue 657.
2012-04-18 Raimund Renkert Issue 494.
2012-03-20 Raimund Renkert Issue 506.
2012-03-20 Ingo Weinzierl #146 Removed discharge curve at gauge from WINFO transition model.
2012-03-08 Ingo Weinzierl Added a new Artifact for loading existing 'floodmaps' via datacage.
2012-02-17 Ingo Weinzierl Picked rev 4070,4074,4076,4080 from trunk.
2012-02-09 Ingo Weinzierl Compute differences between discharge table values and reference discharge table values in historical discharge curve calculation.
2012-02-09 Raimund Renkert Added PDF export to reference curve calculation.
2012-02-09 Felix Wolfsteller Renamed data item names to allow translations.
2012-02-08 Felix Wolfsteller Prepare new data input for reference curves 'Ziel' locations.
2012-02-08 Felix Wolfsteller fix flys/issue474 (manual points in reference curves).
2012-02-08 Felix Wolfsteller Configuration for manualpoints for cross sections.
2012-02-07 Raimund Renkert Added PDF export for historical discharge curve calculations.
2012-02-06 Sascha L. Teichmann Added config for "reduzierte Bezugslinie".
2012-02-06 Sascha L. Teichmann Added error to winfo.xml report.
2012-02-06 Felix Wolfsteller Primitive, incomplete CSV export for reference curves.
2012-02-06 Ingo Weinzierl Added a CSV export for historical discharge curves.
2012-02-03 Ingo Weinzierl W/Q input values in historical discharge curves may now by from type double.
2012-02-03 Felix Wolfsteller Improved reference curve.
2012-02-03 Ingo Weinzierl Added an error report for historical discharge curves.
2012-02-01 Felix Wolfsteller Did some modifications for debugging purposes, added output to reference-curve-state.
2012-02-01 Ingo Weinzierl Added new classes and stubs used to calculate data for historical discharge curve charts.
2012-01-31 Ingo Weinzierl Modified some data types in the 'historical discharge curves' transitions.
2012-01-30 Felix Wolfsteller Fix wrong transition type towards w_diff.
2012-01-30 Felix Wolfsteller Add manual point handling for many different chart types.
2012-01-30 Ingo Weinzierl Fixed a bug in the winfo transitions.
2012-01-30 Ingo Weinzierl Added transitions for 'historical discharge curves' calculation.
2012-01-27 Raimund Renkert Issue 138.
2012-01-27 Raimund Renkert Issue 138.
2012-01-26 Raimund Renkert Issue 138.
2012-01-26 Raimund Renkert Issue 138.
2012-01-26 Felix Wolfsteller Render manual points in longitudinal sections.
2012-01-25 Sascha L. Teichmann Transition/States: Removed superfluous condition checks.
2012-01-25 Sascha L. Teichmann Added transition/state stubs for "Bezugslinienverfahren".
2012-01-23 Felix Wolfsteller Theoretically allow annotations on second y ais. Practically allow Q MainValues on Q Axis in Duration Curves.
2012-01-18 Felix Wolfsteller Add hyk facet to compatibility list of winfo.xml
2012-01-16 Felix Wolfsteller Added certain facets to compatibility matrix.
2011-12-20 Felix Wolfsteller Cosmetics, renamed facet type.
2011-12-20 Felix Wolfsteller Added theme defaults for areas, added facets to compatibility matrices.
2011-12-16 Felix Wolfsteller Added area facets to cross section compatibility matrix.
2011-12-05 Felix Wolfsteller Allow longitudinal_section.q facets in wdiff states output.
2011-11-22 Ingo Weinzierl Added a new Artifact to enable users to add external WMS layers to floodmaps.
2011-11-17 Felix Wolfsteller Added interpolated wkms to compatibility matrix for computed discharge curve diagrams.
2011-11-16 Felix Wolfsteller Extended compatibility matrices.
2011-11-10 Ingo Weinzierl Added new WMSFixpointsArtifact for displaying fixpoints in maps.
2011-11-10 Ingo Weinzierl Added new WMSBuildingsArtifact for displaying buildings in maps.
2011-11-10 Ingo Weinzierl Added new WMSLineArtifact for displaying lines in maps.
2011-11-10 Felix Wolfsteller Made Discharge Longitudinal Section out compatible with Annotations.
2011-11-09 Ingo Weinzierl Added new WMSFloodplainArtifact for displaying floodplains in maps.
2011-11-09 Ingo Weinzierl Added new WMSCatchmentArtifact for displaying catchments in maps.
2011-11-09 Ingo Weinzierl Added new WMSHwsArtifact for displaying flood protection works.
2011-11-09 Felix Wolfsteller Allow wqkms in many outputs, mainvalues in duration curves.
2011-11-04 Ingo Weinzierl Added datacage configuration, loader (Artifact and State) and a theme for cross section tracks.
2011-11-02 Felix Wolfsteller Apply point theme to heightmark data imported via datacage to longitudinal section diagram.
2011-11-02 Felix Wolfsteller Configured discharge curve outs to allow inclusion of mainvalue facets.
2011-11-01 Ingo Weinzierl Added datacage config and loaders for KM WMS layer in floodmaps.
2011-10-28 Ingo Weinzierl Enabled the MapGenerator to create WMS layers with database datastore - riveraxis is the first layer that is no longer fetched from static WMS service but from user specific one.
2011-10-28 Felix Wolfsteller Add annotations to allowed facets for longitudinal_section and w_differences outputs.
2011-10-28 Ingo Weinzierl Improved the MapfileGenerator. It offers methods to create barrier and wsplgen layer files for mapserver.
2011-10-26 Felix Wolfsteller Adjusted winfo.xml to new semantics.
2011-10-12 Felix Wolfsteller Fix remainder of flys/issue304 (Erweiterte Funktionen W-Differenzen).
2011-09-21 Ingo Weinzierl #315 Added new state for entering a kilometer range without step width.
2011-09-15 Felix Wolfsteller Extended WDifferences bracnh of WINFO to have calculation in dedicated,
2011-09-14 Ingo Weinzierl Prepared the winfo artifact for floodmap calculations (now selectable in the UI).
2011-09-12 Felix Wolfsteller Added CSV Exporter for WDifferences.
2011-09-09 Felix Wolfsteller Fix facet name and legend of w-differences, walk over distance state, too.
2011-09-09 Felix Wolfsteller Added configuration to kick-in w-differences branch of winfo.
2011-09-08 Ingo Weinzierl Added an Output target for WSPLGEN reports that will be available when an WSPLGEN calculation is finished.
2011-09-01 Felix Wolfsteller Get real (but yet not parameterized) data to display in CrossSection.
2011-08-31 Felix Wolfsteller Added dummy sceleton for Cross Sections.
2011-08-24 Ingo Weinzierl Moved the input of user defined barriers for the floodmap to an earlier state.
2011-08-22 Ingo Weinzierl Prepared the FloodMapState to save geometries.
2011-07-13 Ingo Weinzierl Introduced a new output 'floodmap' for the FloodMapState.
2011-07-06 Ingo Weinzierl Removed a type from transition model.
2011-07-05 Ingo Weinzierl Enhanced the transition model to continue the parameterization in the waterlevel state to compute flood maps.
2011-06-30 Ingo Weinzierl #159 Modifications in the transition model to support a state with a kilometer range input only.
2011-06-23 Sascha L. Teichmann Added generation and configuration of AT facets.
2011-06-23 Sascha L. Teichmann Corrected configuration for error reports.
2011-06-22 Sascha L. Teichmann Improved situtation on rendering "Abflusskurve am Pegel". Not fully working, yet.
2011-06-22 Sascha L. Teichmann Generate facets for "Abflusskurven am Pegel". Not working by now. :-/
2011-06-20 Sascha L. Teichmann Configured states to generate report facets.
2011-06-17 Sascha L. Teichmann Merged revisions 2127-2133,2136-2137,2140,2143-2144,2146,2150-2151,2153-2154 via svnmerge from
2011-06-17 Sascha L. Teichmann Generate data facets for the computed states. facets-slt
2011-06-17 Ingo Weinzierl Added a parameter 'wq_free' that determines that mode of calculation 1 (specifies if the calculation is bound to a gauge or not).
2011-06-17 Ingo Weinzierl DischargeLongitudinalSectionCurve will have corrected W facets now.
2011-06-16 Ingo Weinzierl Generated facets for each output aspect. facets-slt
2011-05-24 Ingo Weinzierl ISSUE-85 (part III/III) Use the given kilometer values for the waterlevel computation.
2011-05-18 Ingo Weinzierl Enabled the discharge longitudinal section to be exported as WST.
2011-05-17 Ingo Weinzierl Implemented writer that creates WSTs and enabled the WaterlevelExporter to create those.
2011-05-09 Ingo Weinzierl Added a CSV exporter for the discharge longitudinal section computation.
2011-05-06 Ingo Weinzierl Implemented methods to retrieve and compute the data used to create discharge longitudinal sections.
2011-05-05 Ingo Weinzierl Improved the transition model and added states to enable the 'discharge longitudinal section' computation - NOTE: the work in this computation has not finished yet.
2011-05-04 Ingo Weinzierl Improved the transition model and added classes to enable the WINFO artifact to create computed discharge curves - NOTE: each of the new classes is just a stub.
2011-05-03 Ingo Weinzierl Added an exporter to export the computed data of a duration curve.
2011-05-03 Ingo Weinzierl Added an exporter (OutGenerator) for waterlevels which currently supports CSV exports.
2011-05-02 Ingo Weinzierl Enhanced the transition model to reach a state that creates duration curves.
2011-05-02 Ingo Weinzierl Enabled the FLYSArtifact to handle an array of inserted WQ values (without given ranges).
2011-04-28 Ingo Weinzierl Added a further state that is reached if the waterlevel calculation mode has been chosen.
2011-03-30 Ingo Weinzierl Enhanced the output mode for discharge curves with three facets.
2011-03-30 Ingo Weinzierl Renamed an output mode in the WINFO artifact configuration.
2011-03-22 Ingo Weinzierl The location_distance state of the WINFO parameterization has an output mode 'discharge_table' now.
2011-03-18 Ingo Weinzierl Added new states to insert location/distance and w/q data in the config of a WINFO artifact.
2011-03-14 Ingo Weinzierl Introduced a state to select the calculation mode.
2011-02-07 Ingo Weinzierl The input data items of a state are read from configuration after the state has been setup.
2011-02-04 Ingo Weinzierl Improved the init process of the WINFOArtifact - there are two new states to select the river and the gauge.
2011-02-03 Ingo Weinzierl Initializes a TransitionEngine storing all transitions for each artifact at the application start.
2011-02-02 Ingo Weinzierl Added a first stub of an WINFO artifact.

http://dive4elements.wald.intevation.org