Mon, 14 Oct 2019 12:55:07 +0200 |
mschaefer |
Nachtrag Pos. 20: improved infrastructure query
|
Mon, 14 Oct 2019 08:14:58 +0200 |
mschaefer |
Nachtrag Pos. 20: infrastructure query added, calculation updated for extended access class
|
Fri, 11 Oct 2019 18:30:36 +0200 |
dnt_bjoernsen |
zu Pos 20 Nachtrag; infrastructureChoice
|
Thu, 10 Oct 2019 15:29:02 +0200 |
dnt_bjoernsen |
#12 Minuend/Subtrahend + MergeConflict #19 CollisionCalculation
|
Tue, 06 Nov 2018 10:56:22 +0100 |
gernotbelger |
mean bed height -> mean bed LEVEL
|
Fri, 19 Oct 2018 17:19:09 +0200 |
gernotbelger |
Implemented datacage for sinfo - ueberflutungsdauern
|
Fri, 19 Oct 2018 13:34:11 +0200 |
gernotbelger |
FlowDepths: DataCage AWSPL from "Betrieb und Unterhaltung"
|
Mon, 01 Oct 2018 16:21:20 +0200 |
gernotbelger |
Allow to filter datacage entries by module-roles of current user.
|
Mon, 01 Oct 2018 15:54:57 +0200 |
gernotbelger |
Put iota cross section results in own data cage folder; working now
|
Mon, 01 Oct 2018 14:19:42 +0200 |
gernotbelger |
Formatting
|
Fri, 28 Sep 2018 13:44:12 +0200 |
gernotbelger |
Predefined artifact for standard vegetation zones.
|
Thu, 27 Sep 2018 18:06:26 +0200 |
gernotbelger |
VegetationZones in CrossSectionsDiagram
|
Tue, 25 Sep 2018 16:43:51 +0200 |
gernotbelger |
Datenkorb bezugswasserstände längsschnitte + minor fixes
|
Wed, 12 Sep 2018 12:50:28 +0200 |
gernotbelger |
standard veg'zone data cage fix
|
Mon, 20 Aug 2018 16:05:06 +0200 |
mschaefer |
Replaced own W and Q facets in bundu bzws by subclass of FixWaterlevelFacet, added annotations and datacage
|
Mon, 06 Aug 2018 11:51:19 +0200 |
mschaefer |
Added datacage for S-Info collision and U-Info salix line, added datacage grouping for previous calculations of collisions, flood durations, salix lines
|
Mon, 30 Jul 2018 16:43:44 +0200 |
mschaefer |
Added longitudinal section prototype for S-Info flood duration output datacage
|
Mon, 30 Jul 2018 13:40:33 +0200 |
mschaefer |
Facet filter added for S-Info collision and flood duration, db loaded artifacts renamed to predefined..
|
Mon, 30 Jul 2018 13:28:14 +0200 |
gernotbelger |
Fixed: when selecting waterlevels for 'Fließtiefen': should schow W(Q=xxx) syntax for user waterlevels from fixa.
|
Thu, 26 Jul 2018 11:08:11 +0200 |
gernotbelger |
vegZone no-overlap warning
|
Wed, 25 Jul 2018 14:59:48 +0200 |
gernotbelger |
comments deleted
|
Wed, 25 Jul 2018 14:42:44 +0200 |
gernotbelger |
uinfo.inundation_duration veg'zone select
|
Tue, 24 Jul 2018 18:52:40 +0200 |
mschaefer |
Definitions for U-Info salix line
|
Fri, 20 Jul 2018 14:58:34 +0200 |
gernotbelger |
Fixed: using description attribute (same as name) everywhere to avoid gwt error message.
|
Thu, 12 Jul 2018 18:09:48 +0200 |
mschaefer |
Work on S-Info flood duration curve chart
|
Fri, 06 Jul 2018 13:10:31 +0200 |
gernotbelger |
Configured 'year' attributes on bed heights,certain waterlevels and fixation results; this is used in the intelligent datacage selection for waterlevels-soundings
|
Mon, 25 Jun 2018 19:21:11 +0200 |
mschaefer |
Work on calculations for S-Info flood duration workflow
|
Tue, 19 Jun 2018 14:16:45 +0200 |
mschaefer |
Added definitions for the S-Info collision workflow and output
|
Mon, 11 Jun 2018 09:55:35 +0200 |
mschaefer |
Fixed three queries (channel, infrastructure, collision) by removing the trailing semicolon (produces oracle errors)
|
Wed, 06 Jun 2018 13:05:57 +0200 |
gernotbelger |
Testing
|
Mon, 04 Jun 2018 17:31:51 +0200 |
mschaefer |
Added datacage select and chart display for river bed collision counts loaded from database
|
Mon, 04 Jun 2018 12:50:39 +0200 |
mschaefer |
Conf files for the infrastructure datacage extension
|
Mon, 04 Jun 2018 08:50:18 +0200 |
mschaefer |
Where clause of the predefined datacage series extended by km range condition
|
Mon, 04 Jun 2018 08:36:09 +0200 |
mschaefer |
Added datacage select and chart display for river channel sizes loaded from database
|
Mon, 04 Jun 2018 08:32:25 +0200 |
mschaefer |
Where clause in bed-heights-statement extended by km range condition
|
Tue, 29 May 2018 11:02:56 +0200 |
gernotbelger |
Umsortierung in Datenkorb bzgl. min/max Sohlhöhen
|
Fri, 25 May 2018 10:49:23 +0200 |
gernotbelger |
Changed order of SINFO results and fixed data in datacage.
|
Fri, 25 May 2018 07:59:38 +0200 |
mschaefer |
Epoche filter deactivated for bed-heights-single
|
Mon, 07 May 2018 07:56:42 +0200 |
mschaefer |
Fixed the queries for the loadable tkh, flow depth and depth evolution data
|
Mon, 30 Apr 2018 16:00:12 +0200 |
mschaefer |
Added datacage select and chart display for modelled flow depth series loaded from database
|
Fri, 27 Apr 2018 17:41:59 +0200 |
mschaefer |
Added datacage select and chart display for flow depth evolution series loaded from database, and a correction for the tkh data
|
Mon, 23 Apr 2018 15:18:48 +0200 |
mschaefer |
Added datacage select and chart display for TKH series loaded from database
|
Wed, 11 Apr 2018 14:09:13 +0200 |
gernotbelger |
SInfo - FlowDepthMinMax: choosing bed heights, not bed height min and max separately
|
Fri, 06 Apr 2018 11:55:36 +0200 |
gernotbelger |
Fixed bad expression
|
Thu, 05 Apr 2018 18:30:34 +0200 |
gernotbelger |
SINFO - show results themes according to spec, either raw data or floating mean values.
|
Wed, 28 Mar 2018 17:04:20 +0200 |
gernotbelger |
Configured SINFO-zusätzlich selektierte Längsschnitte in datacage
|
Wed, 28 Mar 2018 14:35:01 +0200 |
gernotbelger |
Implemented datacage for min/max bedheights.
|
Fri, 23 Mar 2018 17:53:59 +0100 |
gernotbelger |
Configured datacage for SINFO selektierte zus. Längsschnitte and twin-datacage panel for flowd depth calculation
|
Tue, 20 Mar 2018 13:30:07 +0100 |
gernotbelger |
Work on SINFO-Fließtiefenentwicklung
|
Thu, 15 Mar 2018 17:22:28 +0100 |
gernotbelger |
Implemented chart output for sinfo flow depth min/max calculation
|
Wed, 07 Mar 2018 17:36:04 +0100 |
gernotbelger |
SINFO - tkh, configured result facets and themes
|
Wed, 28 Feb 2018 18:55:39 +0100 |
gernotbelger |
Working on outputmodes of tkh calculation
|
Thu, 22 Feb 2018 18:44:28 +0100 |
gernotbelger |
Adding SInfo results to datacage
|
Mon, 19 Feb 2018 18:04:25 +0100 |
gernotbelger |
Activated theme 'streckeninformation
|
Thu, 18 Jan 2018 18:34:41 +0100 |
gernotbelger |
SINFO - first prototype of BArt Fließtiefen
|
Fri, 28 Aug 2015 16:24:01 +0200 |
Tom Gottfried |
(issue1839) Consider more than one location in ld_locations.
|
Thu, 19 Mar 2015 16:50:24 +0100 |
Andre Heinecke |
(issue1051) Fix recommended official epochs for period mode
|
Thu, 19 Mar 2015 14:03:47 +0100 |
Andre Heinecke |
(issue1755) Fix filtering of BedQuality user facets
|
Thu, 19 Mar 2015 13:36:38 +0100 |
Andre Heinecke |
(issue1755) Add interpolated facets and update themes accordingly
|
Wed, 18 Mar 2015 18:42:08 +0100 |
Andre Heinecke |
(issue1755) Generalise BedQuality result handling
|
Mon, 16 Mar 2015 16:59:37 +0100 |
Tom Gottfried |
Update SQL-statements to schema-changes in rev 6d8d7425a6b5.
|
Mon, 16 Feb 2015 08:39:06 +0100 |
Tom Gottfried |
bed height differences datacage: only supply differences where subtrahend is older than minuend or year is unknown.
|
Fri, 13 Feb 2015 16:17:46 +0100 |
Andre Heinecke |
(Issue1754) Make BedDifference calculation range dependent.
|
Tue, 16 Dec 2014 15:40:00 +0100 |
Andre Heinecke |
(issue1782) Invert KM filter if from is larger then to
|
Tue, 16 Dec 2014 13:29:38 +0100 |
Tom Gottfried |
Whitespace-cleanup in XML-files.
|
Fri, 12 Dec 2014 11:11:26 +0100 |
Tom Gottfried |
Do not filter tables without end date in recommendations for historical discharge tables.
|
Tue, 02 Dec 2014 12:59:52 +0100 |
Tom Gottfried |
Datacage config: Oracle has no boolean data type and thus can not handle such CASE-statement in WHERE-clause.
|
Thu, 20 Nov 2014 11:27:10 +0100 |
Tom Gottfried |
Datacage: order WSTs according to column numbers in import files.
|
Thu, 30 Oct 2014 14:20:28 +0100 |
Tom Gottfried |
Load discharge curves via recommendations in historical discharge calculation. ToDo: Remove the other logic to load them.
|
Wed, 29 Oct 2014 16:02:37 +0100 |
Tom Gottfried |
Recognize the 'no-data value' of fromkm and tokm in datacage statement for discharge curves.
|
Mon, 20 Oct 2014 14:22:51 +0200 |
Tom Gottfried |
Mention gauge name in theme name for historical discharge curves.
|
Mon, 20 Oct 2014 12:23:11 +0200 |
Tom Gottfried |
For fixation analysis, allow loading discharge curves from multiple gauges on calculation range via datacage.
|
Fri, 17 Oct 2014 18:20:33 +0200 |
Tom Gottfried |
Load sounding width via recommendations for bed height differences and cleanup and fix related bed height macros.
|
Fri, 17 Oct 2014 11:44:01 +0200 |
Tom Gottfried |
Do not filter bed heights by year in datacage for optional data (plus some cleanup).
|
Thu, 16 Oct 2014 11:15:09 +0200 |
Tom Gottfried |
Reduce code duplication and repair filter for sediment load-recommendations.
|
Wed, 15 Oct 2014 19:20:26 +0200 |
Tom Gottfried |
SCHEMA CHANGE: removed superfluous columns station and river_id from measurement_stations and adapted other components accordingly.
|
Tue, 07 Oct 2014 19:04:06 +0200 |
Tom Gottfried |
Removed some code duplication and moved macros to more appropriate places in file.
|
Fri, 03 Oct 2014 10:26:58 +0200 |
Tom Gottfried |
Q-symmetric datacage configuration for user-data.
|
Fri, 26 Sep 2014 14:22:37 +0200 |
Tom Gottfried |
The derivative curve is also a discharge diagram.
|
Fri, 26 Sep 2014 14:18:27 +0200 |
Tom Gottfried |
Throw non-lethal XPathException if not at gauge instead of lethal PSQLException if at gauge.
|
Fri, 26 Sep 2014 10:53:26 +0200 |
Tom Gottfried |
Q-main values as recommendations in SQ. TODO: solve DDZ.
|
Thu, 25 Sep 2014 17:24:35 +0200 |
Raimund Renkert |
Use the sq relation artifact to load data from datacage.
|
Tue, 23 Sep 2014 12:56:23 +0200 |
Tom Gottfried |
Q-symmetry: SQ-relations should not be filtered for specific outs (and optimised statement a bit).
|
Tue, 23 Sep 2014 10:11:52 +0200 |
Tom Gottfried |
Put all macros for wst-data in one place and reduce code duplications.
|
Mon, 22 Sep 2014 18:17:47 +0200 |
Tom Gottfried |
Remove duplications from discharge prototypes and put it all together.
|
Fri, 19 Sep 2014 16:29:11 +0200 |
Tom Gottfried |
Classify and sort iteration over user-data non-recommendations.
|
Fri, 19 Sep 2014 16:07:59 +0200 |
Tom Gottfried |
Classify and sort iteration over non-recommendations.
|
Fri, 19 Sep 2014 15:45:54 +0200 |
Tom Gottfried |
Classify and sort iteration over recommendations.
|
Fri, 19 Sep 2014 15:31:03 +0200 |
Tom Gottfried |
Purge clash of out-names, resulting hacks and tests for not existing outs and give some more meaningful names.
|
Fri, 19 Sep 2014 09:49:09 +0200 |
Tom Gottfried |
Official sedimentload epochs should be seperated from other data in datacage.
|
Wed, 17 Sep 2014 13:24:13 +0200 |
Tom Gottfried |
Consider new SQ-diagrams in datacage config.
|
Tue, 16 Sep 2014 16:10:30 +0200 |
Tom Gottfried |
Update comment on conditional loading of user content.
|
Mon, 15 Sep 2014 11:58:31 +0200 |
Tom Gottfried |
Call orphaned macro originating from 'fix_wq_curve' in prototype.
|
Mon, 15 Sep 2014 11:26:48 +0200 |
Tom Gottfried |
Make use of publicly available external WMS (Pegelonline) otherwise called from BfG-specific macro.
|
Fri, 12 Sep 2014 19:09:24 +0200 |
Tom Gottfried |
Remove call of BfG-specific macro.
|
Fri, 12 Sep 2014 13:12:25 +0200 |
Sascha L. Teichmann |
Added discharge curve prototye.
|
Tue, 09 Sep 2014 10:53:50 +0200 |
Tom Gottfried |
Suggestion: Load official epochs via recommendations instead of a pseudo-calculation.
|
Mon, 08 Sep 2014 15:54:12 +0200 |
Tom Gottfried |
Let official epochs be showy and remove detritus of 'yields' in datacage config.
|
Mon, 08 Sep 2014 10:03:00 +0200 |
Tom Gottfried |
Allow fractions without SQ-time interval (suspended sediment) to be loaded.
|
Tue, 02 Sep 2014 14:46:20 +0200 |
Tom Gottfried |
Make sedimentload loadable as old calculation.
|
Mon, 01 Sep 2014 09:43:55 +0200 |
Tom Gottfried |
Handle missing years in bed height differences without assuming an unknown year to be BC 1.
|
Thu, 28 Aug 2014 12:00:52 +0200 |
Tom Gottfried |
Quoting is done elsewhere since rev 7021753b3797.
|
Tue, 26 Aug 2014 17:16:21 +0200 |
Tom Gottfried |
With the exception of real calculation results, descriptions of sediment loads can all follow the same pattern.
|
Tue, 26 Aug 2014 12:09:18 +0200 |
Tom Gottfried |
Metadata in datacage tooltips for sediment densities, bed heights, flow velocities and sounding widhts.
|
Fri, 22 Aug 2014 18:00:35 +0200 |
Tom Gottfried |
Tooltip for sediment loads in datacage.
|
Fri, 22 Aug 2014 17:43:36 +0200 |
Tom Gottfried |
Add SQ time interval to selection tree in datacage for sediment loads.
|
Fri, 22 Aug 2014 13:19:02 +0200 |
Tom Gottfried |
Remove code duplications in sedimentload datacage.
|
Fri, 22 Aug 2014 08:04:43 +0200 |
Tom Gottfried |
Format timestamps in datacage tooltip for porosities.
|
Wed, 20 Aug 2014 17:47:58 +0200 |
Tom Gottfried |
Reconstruct facet description of sediment load longitudinal sections. i18n will follow.
|
Wed, 20 Aug 2014 17:07:17 +0200 |
Tom Gottfried |
Reconstruct facet description of sediment load at measurement stations. i18n will follow.
|
Wed, 20 Aug 2014 12:12:18 +0200 |
Andre Heinecke |
Remove todos about sedimentload_ls facet
|
Wed, 20 Aug 2014 12:10:32 +0200 |
Andre Heinecke |
Configure SedimentLoadLSFacet
|
Tue, 19 Aug 2014 18:46:13 +0200 |
Tom Gottfried |
Distinction by measurement station gives lots of duplicates, as we always get a whole longitudinal section.
|
Fri, 15 Aug 2014 18:24:55 +0200 |
Andre Heinecke |
Change sedimentload factory from yields to loads.
|
Fri, 08 Aug 2014 13:24:11 +0200 |
Tom Gottfried |
Datacage config for new sediment load structures. Missing: some facets and everything down from the innermost macros for sediment load at measurement stations.
|
Wed, 06 Aug 2014 19:17:12 +0200 |
Tom Gottfried |
SCHEMA CHANGE: rename database tables from yield to load_ls according to respective classes.
|
Tue, 08 Jul 2014 18:19:04 +0200 |
Tom Gottfried |
merged default into branch facet-metadata.
facet-metadata
|
Thu, 03 Jul 2014 16:36:43 +0200 |
Tom Gottfried |
Allow differences between years and epochs (accidentally did that in branch facet-metadata already too)
|
Thu, 03 Jul 2014 16:34:28 +0200 |
Tom Gottfried |
Allow differences between years and epochs.
facet-metadata
|
Thu, 03 Jul 2014 12:30:41 +0200 |
Raimund Renkert |
Added macro for middle bedheights for old calculations.
facet-metadata
|