Mon, 14 May 2012 16:57:58 +0000 |
Sascha L. Teichmann |
Added model to store fitting results into cache.
|
Mon, 14 May 2012 10:34:56 +0000 |
Ingo Weinzierl |
Removed the unused computeFeed() from ComputationRangeState to make this State ready to use it in MINFO calculations.
|
Mon, 14 May 2012 08:09:10 +0000 |
Ingo Weinzierl |
Started module MINFO (MINFOArtifact, state to choose calculations, configurations).
|
Sun, 13 May 2012 21:39:55 +0000 |
Felix Wolfsteller |
Removed unused code.
|
Sun, 13 May 2012 21:28:38 +0000 |
Felix Wolfsteller |
Added documentation.
|
Fri, 11 May 2012 12:14:36 +0000 |
Felix Wolfsteller |
Show HYKS in datacage also in non-recommendation mode.
|
Fri, 11 May 2012 08:45:11 +0000 |
Felix Wolfsteller |
Improved middle height calculations.
|
Fri, 11 May 2012 07:24:12 +0000 |
Felix Wolfsteller |
Progressed area calculation while line computation a bit.
|
Fri, 11 May 2012 07:08:56 +0000 |
Felix Wolfsteller |
Fix water-through-mountain in cross sections.
|
Thu, 10 May 2012 11:56:40 +0000 |
Ingo Weinzierl |
Added support for WMS gauges in floodmaps and maps.
|
Thu, 10 May 2012 11:14:17 +0000 |
Ingo Weinzierl |
Improved datacage configuration for floodmaps and maps and modified the WMS layer artifacts to support names for layers.
|
Thu, 10 May 2012 10:04:12 +0000 |
Ingo Weinzierl |
Added a PROJECTION section for all missing mapserver templates.
|
Thu, 10 May 2012 09:44:31 +0000 |
Felix Wolfsteller |
Minor refactoring, docs.
|
Thu, 10 May 2012 09:40:39 +0000 |
Ingo Weinzierl |
Added a Mapserver PROJECTION section into the shapefile template.
|
Thu, 10 May 2012 09:28:01 +0000 |
Felix Wolfsteller |
Minimal doc, TODO.
|
Thu, 10 May 2012 09:13:33 +0000 |
Felix Wolfsteller |
Fix issue620: synchron navigation at impossible km.
|
Thu, 10 May 2012 09:04:39 +0000 |
Felix Wolfsteller |
Minimal cosmetics.
|
Thu, 10 May 2012 09:00:17 +0000 |
Felix Wolfsteller |
More stable waterlinefacet, in prep for fix issue620.
|
Wed, 09 May 2012 20:07:58 +0000 |
Felix Wolfsteller |
Corrected date in ChangeLog entry.
|
Wed, 09 May 2012 20:05:46 +0000 |
Felix Wolfsteller |
Added and respect theme prop whether or not to display (not yet calculated) middle height.
|
Wed, 09 May 2012 19:03:54 +0000 |
Felix Wolfsteller |
Beginnings of mittlere hoehe calculation.
|
Tue, 08 May 2012 13:55:59 +0000 |
Ingo Weinzierl |
Modified floodmap specific datacage configuration and improved WMS hws layer.
|
Tue, 08 May 2012 12:14:55 +0000 |
Ingo Weinzierl |
Modified floodmap specific datacage configuration and improved WMS catchment layer.
|
Tue, 08 May 2012 11:29:13 +0000 |
Ingo Weinzierl |
Modified configuration of facets for 'map' and theme for floodmap lines.
|
Tue, 08 May 2012 10:19:43 +0000 |
Ingo Weinzierl |
Added a PROJECTION section to all db mapserver layers.
|
Mon, 07 May 2012 13:27:45 +0000 |
Raimund Renkert |
Modified states and added new state for fixing analysis.
|
Fri, 04 May 2012 13:47:37 +0000 |
Felix Wolfsteller |
Respect area label bg text style, draw label roughly at centroid of polygons (sofar, better but not yet good).
|
Thu, 03 May 2012 20:23:02 +0000 |
Felix Wolfsteller |
More concrete Area theme. Experimentally disabled duplicate Lines theme.
|
Thu, 03 May 2012 09:41:08 +0000 |
Felix Wolfsteller |
Fix area creation.
|
Thu, 03 May 2012 08:56:19 +0000 |
Felix Wolfsteller |
Added and respect two new properties of waterlevels in cross-sections.
|
Thu, 03 May 2012 07:48:12 +0000 |
Felix Wolfsteller |
Respect show line label bg setting.
|
Thu, 03 May 2012 05:59:52 +0000 |
Ingo Weinzierl |
Added 'helpText' fields to the transition model.
|
Wed, 02 May 2012 22:30:27 +0000 |
Felix Wolfsteller |
Respect colors of theme for linelabels.
|
Wed, 02 May 2012 19:54:58 +0000 |
Felix Wolfsteller |
Actually use font specified in theme document for linelabel.
|
Wed, 02 May 2012 19:02:55 +0000 |
Felix Wolfsteller |
Change default for showbg of linelabel theme.
|
Wed, 02 May 2012 15:10:45 +0000 |
Felix Wolfsteller |
Cosmetic, added annotation.
|
Wed, 02 May 2012 15:09:04 +0000 |
Felix Wolfsteller |
Parse more theme properties for linelabels.
|
Wed, 02 May 2012 08:50:01 +0000 |
Sascha L. Teichmann |
Make it compilable again after signature change in backend.
|
Fri, 27 Apr 2012 10:13:16 +0000 |
Felix Wolfsteller |
Cosmetics, doc.
|
Fri, 27 Apr 2012 09:58:21 +0000 |
Felix Wolfsteller |
Added DataType for lines that also stores width, use it. Added HasLabel interface for some series.
|
Thu, 26 Apr 2012 15:08:51 +0000 |
Raimund Renkert |
Initial transition configuration and artifact/state stubs for fixation
|
Thu, 26 Apr 2012 13:38:56 +0000 |
Sascha L. Teichmann |
Add method to calculate length of water lines.
|
Thu, 26 Apr 2012 10:45:25 +0000 |
Felix Wolfsteller |
Most of issue454: Label waterlines.
|
Thu, 26 Apr 2012 09:51:13 +0000 |
Felix Wolfsteller |
Let theme define whether or not to display a (yet static) label for line).
|
Thu, 26 Apr 2012 08:11:48 +0000 |
Felix Wolfsteller |
Cosmetics, doc.
|
Wed, 25 Apr 2012 16:04:37 +0000 |
Sascha L. Teichmann |
Checked in out dated version of outlier test.
|
Wed, 25 Apr 2012 15:57:23 +0000 |
Sascha L. Teichmann |
Added simple Grubb's outlier test.
|
Wed, 25 Apr 2012 15:15:39 +0000 |
Felix Wolfsteller |
Stub for labeling dataseries in EnhancedLineAndShapeRenerer.
|
Wed, 25 Apr 2012 14:41:01 +0000 |
Felix Wolfsteller |
Added accidentally ommitted ChangeLog entry for last commit.
|
Wed, 25 Apr 2012 14:21:09 +0000 |
Sascha L. Teichmann |
Make file upload cross platform.
|
Wed, 25 Apr 2012 14:14:14 +0000 |
Sascha L. Teichmann |
Make it compilable again.
|
Wed, 25 Apr 2012 07:45:00 +0000 |
Raimund Renkert |
Issue 657.
|
Thu, 19 Apr 2012 11:49:57 +0000 |
Raimund Renkert |
Issue 560.
|
Wed, 18 Apr 2012 11:35:14 +0000 |
Raimund Renkert |
Issue 560.
|
Wed, 18 Apr 2012 09:28:50 +0000 |
Sascha L. Teichmann |
Removed superfluous imports.
|
Wed, 18 Apr 2012 07:59:14 +0000 |
Raimund Renkert |
Styles are now available for manual points in historical discharge charts.
|
Wed, 18 Apr 2012 07:56:55 +0000 |
Raimund Renkert |
Fixed duplicated legend entry for manual points.
|
Wed, 18 Apr 2012 07:14:48 +0000 |
Raimund Renkert |
Issue 494.
|
Tue, 17 Apr 2012 13:55:50 +0000 |
Sascha L. Teichmann |
Improve XSL transformation for fixings overview output.
|
Fri, 13 Apr 2012 07:44:25 +0000 |
Raimund Renkert |
Issue 528, 637.
|
Fri, 13 Apr 2012 07:40:22 +0000 |
Raimund Renkert |
Small fixes in pdf templates for reference curve export.
|
Thu, 12 Apr 2012 15:34:01 +0000 |
Raimund Renkert |
Issue 528, 637.
|
Thu, 12 Apr 2012 13:57:02 +0000 |
Raimund Renkert |
Issue 528, 637.
|
Wed, 11 Apr 2012 15:37:44 +0000 |
Sascha L. Teichmann |
check-i18n-properties.py: Checked in unsaved version.
|
Wed, 11 Apr 2012 13:27:36 +0000 |
Raimund Renkert |
Issue 656.
|
Wed, 11 Apr 2012 10:54:26 +0000 |
Sascha L. Teichmann |
Added consistency checker for i18n properties files.
|
Wed, 11 Apr 2012 10:14:13 +0000 |
Sascha L. Teichmann |
Generate error message when more than one Q is found for given Q in "W auf freier Strecke".
|
Wed, 11 Apr 2012 09:17:03 +0000 |
Raimund Renkert |
Fixed step calculation in W/Q range input mode.
|
Fri, 06 Apr 2012 10:12:34 +0000 |
Sascha L. Teichmann |
Fixed the fixings columns caching problem.
|
Thu, 05 Apr 2012 18:25:48 +0000 |
Sascha L. Teichmann |
FixingsKMChartService.java: Small fixes.
|
Thu, 05 Apr 2012 18:07:47 +0000 |
Sascha L. Teichmann |
FixingsKMChartService: Generate chart and deliver the image as the response of the service.
|
Thu, 05 Apr 2012 15:29:52 +0000 |
Sascha L. Teichmann |
Loaded columns of fixings from database and store them into the cache.
|
Thu, 05 Apr 2012 15:29:25 +0000 |
Raimund Renkert |
Fix for 'W free' validation and theme names.
|
Thu, 05 Apr 2012 08:51:53 +0000 |
Raimund Renkert |
Issue 499.
|
Thu, 05 Apr 2012 07:21:58 +0000 |
Ingo Weinzierl |
Defined a style for WSPLGEN layers which are now modifiable.
|
Wed, 04 Apr 2012 18:30:44 +0000 |
Sascha L. Teichmann |
More code for the fixings km chart service.
|
Wed, 04 Apr 2012 14:41:27 +0000 |
Sascha L. Teichmann |
Added service to generate a chart of fixings for given river and km applied
|
Wed, 04 Apr 2012 14:17:36 +0000 |
Sascha L. Teichmann |
Fixed NPE bug in filter builder for fixings overview.
|
Wed, 04 Apr 2012 10:32:45 +0000 |
Sascha L. Teichmann |
Squashed performance bug introduced in rev4070. Now CSV export is about 245 times faster.
|
Tue, 03 Apr 2012 13:46:16 +0000 |
Sascha L. Teichmann |
Refactored the code of the fixings filter building to be useful in more cases.
|
Tue, 03 Apr 2012 11:15:13 +0000 |
Sascha L. Teichmann |
Abjusted services to new hierachy.
|
Fri, 30 Mar 2012 09:38:29 +0000 |
Ingo Weinzierl |
#460 Fixed duplicated Outputs in DESCRIBE documents.
|
Thu, 29 Mar 2012 11:09:26 +0000 |
Ingo Weinzierl |
#366 Display correct descriptions in legend panel of charts.
|
Wed, 28 Mar 2012 12:18:44 +0000 |
Ingo Weinzierl |
#362 Adjusted text color of w and q main values for computed discharge curves.
|
Fri, 23 Mar 2012 09:25:54 +0000 |
Sascha L. Teichmann |
Applied patch from flys/issue639
|
Thu, 22 Mar 2012 15:02:07 +0000 |
Felix Wolfsteller |
Add textorientation to Hyk themes.
|
Thu, 22 Mar 2012 10:56:20 +0000 |
Felix Wolfsteller |
Fix flys/issue491 (areas over axis stop at zero).
|
Tue, 20 Mar 2012 15:08:01 +0000 |
Raimund Renkert |
Issue 506.
|
Tue, 20 Mar 2012 13:51:39 +0000 |
Ingo Weinzierl |
#544 Added a service that allows querying gauge information.
|
Tue, 20 Mar 2012 11:34:44 +0000 |
Ingo Weinzierl |
Improved selecting discharge tables for historical discharge calculation.
|
Tue, 20 Mar 2012 07:38:48 +0000 |
Ingo Weinzierl |
#146 Removed discharge curve at gauge from WINFO transition model.
|
Tue, 20 Mar 2012 05:56:16 +0000 |
Ingo Weinzierl |
#252 Added numeric value of a named main value into the WST export.
|
Fri, 16 Mar 2012 09:51:51 +0000 |
Ingo Weinzierl |
Fixed broken Floodmaps in datacage for floodmap output.
|
Fri, 16 Mar 2012 09:32:29 +0000 |
Raimund Renkert |
Remove unnecessary outputs from attributes instead of copying outs to
|
Fri, 16 Mar 2012 07:12:40 +0000 |
Ingo Weinzierl |
Tagged trunk of module 'flys-artifacts' as 'pre2.7-2012-03-16'.
|
Fri, 16 Mar 2012 07:07:32 +0000 |
Ingo Weinzierl |
Removed useless imports.
|
Fri, 16 Mar 2012 07:06:19 +0000 |
Ingo Weinzierl |
#523 Improved the look of minimum and maximum shapes in chart series.
|
Thu, 15 Mar 2012 12:28:11 +0000 |
Ingo Weinzierl |
#522 Modified axes creation: label and tick label fonts will now always be the same.
|
Thu, 15 Mar 2012 10:36:09 +0000 |
Raimund Renkert |
Changed wrong issue number.
|
Thu, 15 Mar 2012 10:32:50 +0000 |
Raimund Renkert |
Issue 459.
|
Thu, 15 Mar 2012 10:30:03 +0000 |
Ingo Weinzierl |
Removed references to Range and replaced those with references to Bounds in ChartGenerators.
|
Wed, 14 Mar 2012 15:12:45 +0000 |
Ingo Weinzierl |
Enabeld axes label font sizes for timeseries charts.
|
Wed, 14 Mar 2012 15:00:30 +0000 |
Raimund Renkert |
Issue 640.
|
Fri, 09 Mar 2012 12:57:23 +0000 |
Felix Wolfsteller |
Stubby legend aggregation.
|
Thu, 08 Mar 2012 14:25:37 +0000 |
Ingo Weinzierl |
Fixed broken XML syntax in themes.xml
|
Thu, 08 Mar 2012 14:21:09 +0000 |
Ingo Weinzierl |
Modified the datacage structure of 'floodmaps'.
|
Thu, 08 Mar 2012 13:44:51 +0000 |
Ingo Weinzierl |
Added a new Artifact for loading existing 'floodmaps' via datacage.
|
Thu, 08 Mar 2012 13:06:11 +0000 |
Ingo Weinzierl |
Improved the datacage configuration to serve floodmaps.
|
Mon, 05 Mar 2012 10:53:42 +0000 |
Ingo Weinzierl |
#566 Improved german translation.
|
Mon, 05 Mar 2012 10:29:51 +0000 |
Felix Wolfsteller |
Partial fix flys/issue 528 (csv of reference curves. pdf missing).
|
Mon, 05 Mar 2012 10:16:26 +0000 |
Felix Wolfsteller |
Fixed column order.
|
Mon, 05 Mar 2012 10:00:06 +0000 |
Felix Wolfsteller |
Stub to export the 'W (cm)' column of reference curves conditionally on Gauge presence.
|
Mon, 05 Mar 2012 09:53:30 +0000 |
Felix Wolfsteller |
New utility to handle more dynamically long csv exported rows.
|
Thu, 01 Mar 2012 14:52:15 +0000 |
Felix Wolfsteller |
Fix flys/issue501 (manual points have two legend entries).
|
Thu, 01 Mar 2012 14:45:36 +0000 |
Felix Wolfsteller |
Fix flys/issue636 (cross-section: name of waterlevel facets).
|
Thu, 01 Mar 2012 12:44:33 +0000 |
Felix Wolfsteller |
Partial fix flys/issue615, adjusted datacage conf.
|
Thu, 01 Mar 2012 12:17:38 +0000 |
Felix Wolfsteller |
Partial Dontcrash on flys/issue647 (NaNs from WstValueTable interpolation).
|
Thu, 01 Mar 2012 12:12:20 +0000 |
Felix Wolfsteller |
Cosmetics, docs.
|
Mon, 27 Feb 2012 14:16:30 +0000 |
Sascha L. Teichmann |
Added functions to be used for fitting in the "Fixierungsanalyse" and "Extremwertermittlung".
|
Mon, 27 Feb 2012 10:50:14 +0000 |
Felix Wolfsteller |
Added ommitted i18n.
|
Mon, 27 Feb 2012 10:49:20 +0000 |
Felix Wolfsteller |
fix flys/issue638 (area between certain datatypes).
|
Mon, 27 Feb 2012 09:09:54 +0000 |
Felix Wolfsteller |
Partial fix flys/issue637 (wording).
|
Tue, 21 Feb 2012 18:22:06 +0000 |
Sascha L. Teichmann |
FixingsOverview: Added XSL transformation which directly converts the output of the fixings overview service into an HTML representation.
|
Mon, 20 Feb 2012 19:13:19 +0000 |
Sascha L. Teichmann |
FixingsOverviewService: Made the filter mechanisms available via the incoming XML document.
|
Mon, 20 Feb 2012 16:41:45 +0000 |
Sascha L. Teichmann |
FixingsOverview: Added a filter mechanism for generating output.
|
Mon, 20 Feb 2012 14:36:28 +0000 |
Sascha L. Teichmann |
FixingsOverview: Construct the Q sectors once.
|
Sun, 19 Feb 2012 17:14:39 +0000 |
Sascha L. Teichmann |
Service to generate the data needed to build the "Fixerungen pro Fluss Uebersicht"
|
Fri, 17 Feb 2012 14:16:50 +0000 |
Sascha L. Teichmann |
WstValueTable: Forget to check in the range method of getMinMaxQ().
|
Fri, 17 Feb 2012 14:04:54 +0000 |
Sascha L. Teichmann |
WstValueTable: Symmetrical to getMinMaxW() add two methods to find min/max Q for a given
|
Fri, 17 Feb 2012 11:59:30 +0000 |
Sascha L. Teichmann |
WstValueTable: Added method to find the w extent for a given km range.
|
Fri, 17 Feb 2012 11:29:14 +0000 |
Sascha L. Teichmann |
WstValueTable: Added method to find the w extent for a given km.
|
Fri, 17 Feb 2012 11:03:28 +0000 |
Raimund Renkert |
Renamed state data fields for W/Q input.
|
Fri, 17 Feb 2012 09:20:02 +0000 |
Raimund Renkert |
Write the gauge description instead of the Q value to CSV file.
|
Fri, 17 Feb 2012 07:49:41 +0000 |
Ingo Weinzierl |
Apply legend specific settings (show/hide) in timeseries charts.
|
Fri, 17 Feb 2012 07:45:27 +0000 |
Ingo Weinzierl |
Some refactoring in chart creation; timeseries charts are now able to apply plot specific settings as well.
|
Thu, 16 Feb 2012 12:36:25 +0000 |
Raimund Renkert |
Refactored the wq data fields.
|
Thu, 16 Feb 2012 12:30:33 +0000 |
Sascha L. Teichmann |
Fixed W->Q conversion for "W fuer ungleichwertige Abflusslaengsschnitte."
|
Thu, 16 Feb 2012 12:15:11 +0000 |
Ingo Weinzierl |
#509 Set the lower bounds of duration curves Q axis to 0 if no zoom has taken place.
|
Thu, 16 Feb 2012 11:58:10 +0000 |
Felix Wolfsteller |
Removed not needed function from interface.
|
Fri, 17 Feb 2012 12:59:56 +0000 |
Ingo Weinzierl |
Picked rev 4070,4074,4076,4080 from trunk.
|
Fri, 17 Feb 2012 11:29:41 +0000 |
Ingo Weinzierl |
Picked rev 4058,4063,4065,4068,4069 from trunk.
|
Thu, 16 Feb 2012 12:35:51 +0000 |
Ingo Weinzierl |
Picked rev4061 from trunk.
|
Thu, 16 Feb 2012 11:54:10 +0000 |
Felix Wolfsteller |
Fix flys/issue150 ('water increasing').
|
Thu, 16 Feb 2012 06:47:46 +0000 |
Ingo Weinzierl |
Fixed broken HYKs in crosssection charts for river Mosel.
|
Tue, 14 Feb 2012 16:48:13 +0000 |
Sascha L. Teichmann |
Another partial fix for flys/issue499: Do the W to Q conversions
|
Tue, 14 Feb 2012 09:02:51 +0000 |
Felix Wolfsteller |
Added accidentally ommitted ChangeLog entry.
|
Mon, 13 Feb 2012 17:49:04 +0000 |
Sascha L. Teichmann |
Partial fix for flys/issue499
|
Mon, 13 Feb 2012 16:43:40 +0000 |
Felix Wolfsteller |
Partial Fix flys/issue500: Text-background for manual points.
|
Mon, 13 Feb 2012 15:31:17 +0000 |
Felix Wolfsteller |
Partial fix flys/issue500 (text bg of some annotations).
|
Mon, 13 Feb 2012 14:41:45 +0000 |
Felix Wolfsteller |
Fix flys/issue490 (text for manual points).
|
Fri, 10 Feb 2012 17:28:28 +0000 |
Sascha L. Teichmann |
'Reduzierte Bezugslinien' make the code more self explaining.
|
Fri, 10 Feb 2012 16:33:36 +0000 |
Ingo Weinzierl |
Bugfix: Take care on empty ArtifactAndFacet objects in doAnnotations().
|
Fri, 10 Feb 2012 16:25:27 +0000 |
Sascha L. Teichmann |
'Bezugslinien': normalized reference curve is now derived from reference curve.
|
Fri, 10 Feb 2012 16:00:57 +0000 |
Sascha L. Teichmann |
'Bezugslinien': Added axis labels matching the displayed data.
|
Fri, 10 Feb 2012 14:04:07 +0000 |
Ingo Weinzierl |
Fixed broken PDF export for historical discharge curves.
|
Fri, 10 Feb 2012 12:41:12 +0000 |
Felix Wolfsteller |
Towards fixe of flys/issue495.
|
Fri, 10 Feb 2012 12:09:36 +0000 |
Sascha L. Teichmann |
'Bezugslinienverfahren': Fix the index bug.
|
Fri, 10 Feb 2012 11:28:43 +0000 |
Sascha L. Teichmann |
'Bezugslinienverfahren': Improve the error messages even more.
|
Fri, 10 Feb 2012 11:21:35 +0000 |
Sascha L. Teichmann |
'Bezugslinienverfahren': Forget to put new created WWAxisType onto blackboard.
|
Fri, 10 Feb 2012 11:02:23 +0000 |
Felix Wolfsteller |
Adjust linear function offset.
|
Fri, 10 Feb 2012 10:45:32 +0000 |
Ingo Weinzierl |
Enabled zooming for timeseries charts.
|
Fri, 10 Feb 2012 10:43:29 +0000 |
Ingo Weinzierl |
Improved the interface and implementations of Bounds.
|
Fri, 10 Feb 2012 10:24:33 +0000 |
Ingo Weinzierl |
New abstract methods in ChartGenerator and moved a method from ChartGenerator to XYChartGenerator.
|
Fri, 10 Feb 2012 10:20:02 +0000 |
Ingo Weinzierl |
Small improvements in model classes for Bounds.
|
Fri, 10 Feb 2012 10:12:12 +0000 |
Sascha L. Teichmann |
Give more precise message when an error occurs in W~W relation.
|
Fri, 10 Feb 2012 08:56:19 +0000 |
Ingo Weinzierl |
Some API changes in ChartGenerator and XYChartGenerator for fetching user specified zoom values.
|
Fri, 10 Feb 2012 08:43:06 +0000 |
Ingo Weinzierl |
Added chart helper function to determine the min and max bounds (x and y) for TimeSeriesCollections.
|
Fri, 10 Feb 2012 08:41:07 +0000 |
Ingo Weinzierl |
Removed useless imports.
|
Fri, 10 Feb 2012 16:42:41 +0000 |
Ingo Weinzierl |
Picked rev4038 from trunk to stop Annotations break chart rendering.
|
Fri, 10 Feb 2012 14:07:03 +0000 |
Ingo Weinzierl |
Picked rev4034 from trunk.
|
Fri, 10 Feb 2012 11:18:27 +0000 |
Ingo Weinzierl |
Picked changes r4015:4026 from trunk.
|
Fri, 10 Feb 2012 08:28:17 +0000 |
Felix Wolfsteller |
Add W(cm) column to csv export of reference curves.
|
Thu, 09 Feb 2012 22:03:07 +0000 |
Ingo Weinzierl |
Added standalone demo application that prints all layers of a WMS to file.
|
Thu, 09 Feb 2012 18:38:03 +0000 |
Ingo Weinzierl |
Added new model classes that should be used for axes range adaption later.
|
Thu, 09 Feb 2012 17:28:31 +0000 |
Sascha L. Teichmann |
'Bezugslinienverfahren': Generate valid i18n names for datasets.
|
Thu, 09 Feb 2012 15:59:49 +0000 |
Ingo Weinzierl |
#485 Fixed broken renaming of chart themes.
|
Thu, 09 Feb 2012 15:48:13 +0000 |
Felix Wolfsteller |
Changed dashes in entitie names to underscores.
|
Thu, 09 Feb 2012 14:51:50 +0000 |
Sascha L. Teichmann |
Fixed problems with incluing zeros in reference curves.
|
Thu, 09 Feb 2012 14:37:51 +0000 |
Felix Wolfsteller |
Allow manual points in new charts.
|
Thu, 09 Feb 2012 14:27:47 +0000 |
Ingo Weinzierl |
Enabled styling in timeseries charts.
|
Thu, 09 Feb 2012 14:26:03 +0000 |
Sascha L. Teichmann |
ChangeLog: forget to commit
|
Thu, 09 Feb 2012 14:24:27 +0000 |
Felix Wolfsteller |
Added area facet to compatibility list of new charts longitudinal section output.
|
Thu, 09 Feb 2012 13:45:26 +0000 |
Felix Wolfsteller |
Avoid that annotations like the ones used for hyks prevent manual point text annotation rendering.
|
Thu, 09 Feb 2012 13:28:57 +0000 |
Ingo Weinzierl |
Added themes for discharge curves and difference curves in historical discharge curve charts.
|
Thu, 09 Feb 2012 11:47:25 +0000 |
Ingo Weinzierl |
Some bugfixes and improvements in the calculation of historical discharge curves.
|
Thu, 09 Feb 2012 11:33:47 +0000 |
Felix Wolfsteller |
Fix call to StringUtils.join .
|
Thu, 09 Feb 2012 11:00:27 +0000 |
Felix Wolfsteller |
Added i18n string for waterlevels.
|
Thu, 09 Feb 2012 10:59:38 +0000 |
Felix Wolfsteller |
Format multiple double values with a locale.
|
Thu, 09 Feb 2012 10:57:35 +0000 |
Ingo Weinzierl |
Compute differences between discharge table values and reference discharge table values in historical discharge curve calculation.
|
Thu, 09 Feb 2012 10:21:16 +0000 |
Raimund Renkert |
Added PDF export to reference curve calculation.
|
Thu, 09 Feb 2012 10:08:14 +0000 |
Sascha L. Teichmann |
Prevent duplicates in end kms for reference curve calculation.
|
Thu, 09 Feb 2012 08:40:39 +0000 |
Felix Wolfsteller |
Renamed data item names to allow translations.
|
Wed, 08 Feb 2012 16:51:15 +0000 |
Felix Wolfsteller |
Better description for reference curve facets (seen in client).
|
Wed, 08 Feb 2012 16:12:15 +0000 |
Felix Wolfsteller |
Prepare new data input for reference curves 'Ziel' locations.
|
Wed, 08 Feb 2012 15:51:25 +0000 |
Sascha L. Teichmann |
Error report: Format kms in error reports at least with one digit after the decimal separator.
|
Wed, 08 Feb 2012 15:50:25 +0000 |
Ingo Weinzierl |
#483 Display error message in calculation report for empty historical discharge calculations.
|
Wed, 08 Feb 2012 15:31:24 +0000 |
Sascha L. Teichmann |
Fix flys/issue468 (Fehler beim Projekt-Duplizieren)
|
Wed, 08 Feb 2012 14:45:53 +0000 |
Felix Wolfsteller |
Handle manual points in discharge curve generator.
|
Wed, 08 Feb 2012 14:37:35 +0000 |
Felix Wolfsteller |
Repair area over cross sections.
|
Wed, 08 Feb 2012 11:47:14 +0000 |
Ingo Weinzierl |
Put line and text annotations placed at x and y axes into foreground.
|
Wed, 08 Feb 2012 11:16:39 +0000 |
Felix Wolfsteller |
Partial fix issue474, i18n.
|
Wed, 08 Feb 2012 10:54:23 +0000 |
Ingo Weinzierl |
Be more merciful for building the URL for the user-wms.
|
Wed, 08 Feb 2012 10:26:21 +0000 |
Felix Wolfsteller |
Fix flys/issue472. (discharge_curve manualpoints)
|
Wed, 08 Feb 2012 10:09:34 +0000 |
Sascha L. Teichmann |
Fix flys/issue484
|
Wed, 08 Feb 2012 10:02:43 +0000 |
Felix Wolfsteller |
Map themes to manualpoint themes.
|
Wed, 08 Feb 2012 09:52:52 +0000 |
Felix Wolfsteller |
Configuration for manualpoints for cross sections.
|
Wed, 08 Feb 2012 09:35:07 +0000 |
Felix Wolfsteller |
Commented styling option for show area until area calculation does work.
|
Wed, 08 Feb 2012 09:33:06 +0000 |
Sascha L. Teichmann |
Calculation error report: i18n the km of the error report.
|
Tue, 07 Feb 2012 18:12:08 +0000 |
Ingo Weinzierl |
Small bugfix for fetching river annotations.
|
Tue, 07 Feb 2012 14:38:42 +0000 |
Sascha L. Teichmann |
Added missing config of chart info generator
|
Tue, 07 Feb 2012 13:26:18 +0000 |
Ingo Weinzierl |
Fixed wrong name of chartinfo generator for historical discharge curves.
|
Tue, 07 Feb 2012 10:29:39 +0000 |
Raimund Renkert |
Added PDF export for historical discharge curve calculations.
|
Tue, 07 Feb 2012 09:58:15 +0000 |
Felix Wolfsteller |
Improved CSV export of reference curves, include Qs.
|
Tue, 07 Feb 2012 09:54:29 +0000 |
Felix Wolfsteller |
Refactored Formatter access to ease reuse.
|
Tue, 07 Feb 2012 09:52:55 +0000 |
Felix Wolfsteller |
Let reference curve calculation result in wwqq.
|
Tue, 07 Feb 2012 08:28:22 +0000 |
Felix Wolfsteller |
Log error as warning.
|
Mon, 06 Feb 2012 17:40:36 +0000 |
Sascha L. Teichmann |
"Bezugslinienverfahren": Do normalisation of reference curves.
|
Mon, 06 Feb 2012 16:35:55 +0000 |
Sascha L. Teichmann |
"Bezugslinienverfahren": Added missing chart info generator.
|
Mon, 06 Feb 2012 16:12:48 +0000 |
Felix Wolfsteller |
Fix i18n
|
Mon, 06 Feb 2012 15:57:31 +0000 |
Sascha L. Teichmann |
"Bezugslinienverfahren": Fetch axis types from call context.
|
Mon, 06 Feb 2012 15:42:27 +0000 |
Sascha L. Teichmann |
Added generator for "Reduzierte Bezugslinie".
|
Mon, 06 Feb 2012 15:37:54 +0000 |
Raimund Renkert |
Added service for discharge infos at a specific gauge.
|
Mon, 06 Feb 2012 15:18:15 +0000 |
Sascha L. Teichmann |
Added config for "reduzierte Bezugslinie".
|
Mon, 06 Feb 2012 14:58:29 +0000 |
Sascha L. Teichmann |
Added error to winfo.xml report.
|
Mon, 06 Feb 2012 14:37:30 +0000 |
Ingo Weinzierl |
Set proper bounds for date axes in the chart info document; tell the transformation matrix which type it is (date/number).
|
Mon, 06 Feb 2012 14:22:26 +0000 |
Felix Wolfsteller |
Extend reference curve export to include km location as string.
|
Mon, 06 Feb 2012 14:21:02 +0000 |
Sascha L. Teichmann |
"Bezugslinienverfahren": Store Qs of calculation, too.
|
Mon, 06 Feb 2012 14:02:04 +0000 |
Felix Wolfsteller |
Win fight against svn, added further i18n and slightly more data in reference-curve/csv export.
|
Mon, 06 Feb 2012 14:00:27 +0000 |
Felix Wolfsteller |
Added more i18n stubs and slightly more data to csv export of reference curves.
|
Mon, 06 Feb 2012 13:59:28 +0000 |
Felix Wolfsteller |
Added a second Y axis for ReferenceCurveGenerator.q
|
Mon, 06 Feb 2012 13:53:49 +0000 |
Sascha L. Teichmann |
Return the Qs from the "Bezugslinienverfahren, too."
|
Mon, 06 Feb 2012 13:20:00 +0000 |
Felix Wolfsteller |
Added a second Y axis for ReferenceCurveGenerator.
|
Mon, 06 Feb 2012 13:09:05 +0000 |
Felix Wolfsteller |
Added accidentally ommitted ChangeLog.
|
Mon, 06 Feb 2012 13:04:52 +0000 |
Felix Wolfsteller |
Minor i18n for reference curve chart added.
|
Mon, 06 Feb 2012 11:14:33 +0000 |
Ingo Weinzierl |
Registered an Info generator for historical discharge curves; made some adaptions in XYChartGenerator, ChartGenerator and TimeseriesChartGenerator.
|
Mon, 06 Feb 2012 10:17:29 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Mon, 06 Feb 2012 10:15:41 +0000 |
Felix Wolfsteller |
Add a not-yet-looked-at CSV facet for Reference Curve.
|
Mon, 06 Feb 2012 08:36:26 +0000 |
Ingo Weinzierl |
Added a CSV export for historical discharge curves.
|
Mon, 06 Feb 2012 07:39:59 +0000 |
Felix Wolfsteller |
Adjusted to name change in River class (hibernate fix).
|
Fri, 03 Feb 2012 18:03:26 +0000 |
Sascha L. Teichmann |
First steps to serve the data in cm if we are are gauges only.
|
Fri, 03 Feb 2012 15:22:56 +0000 |
Ingo Weinzierl |
W/Q input values in historical discharge curves may now by from type double.
|
Fri, 03 Feb 2012 14:57:10 +0000 |
Sascha L. Teichmann |
Removed superfluous imports.
|
Fri, 03 Feb 2012 14:53:11 +0000 |
Sascha L. Teichmann |
Dont sort the data series in reference curve.
|
Fri, 03 Feb 2012 13:51:08 +0000 |
Felix Wolfsteller |
Removed obsolete ReferenceCurveInputState.
|
Fri, 03 Feb 2012 13:49:16 +0000 |
Felix Wolfsteller |
Improved reference curve.
|
Fri, 03 Feb 2012 13:46:03 +0000 |
Ingo Weinzierl |
Bugfix: create a report facet for historical discharge curves even if no data has been computed.
|
Fri, 03 Feb 2012 13:42:48 +0000 |
Ingo Weinzierl |
Create title, subtitle and axes labels for charts from type historical discharge curve.
|
Fri, 03 Feb 2012 13:33:58 +0000 |
Felix Wolfsteller |
Fix.
|
Fri, 03 Feb 2012 13:06:23 +0000 |
Felix Wolfsteller |
Added i18n.
|
Fri, 03 Feb 2012 13:05:25 +0000 |
Felix Wolfsteller |
Doc added and fix getAxisWalker-issue.
|
Fri, 03 Feb 2012 12:16:59 +0000 |
Sascha L. Teichmann |
Use the ApplyFunctionIterator in reference curve generation.
|
Fri, 03 Feb 2012 11:45:22 +0000 |
Ingo Weinzierl |
Added an error report for historical discharge curves.
|
Fri, 03 Feb 2012 10:45:12 +0000 |
Ingo Weinzierl |
Improved chart creation for historical discharge curves.
|
Fri, 03 Feb 2012 09:39:22 +0000 |
Ingo Weinzierl |
Further refactoring of XYChartGenerator / ChartGenerator with the result, that timerange charts are now able to display lines.
|
Fri, 03 Feb 2012 09:35:46 +0000 |
Ingo Weinzierl |
New helper functions in ChartHelper and improvements in EnhancedLineAndShapeRenderer.
|
Thu, 02 Feb 2012 16:39:50 +0000 |
Ingo Weinzierl |
The HistoricalDischargeCurveGenerator now creates new AxisDataset objects and new TimeSeriesCollections for each Facet.
|
Thu, 02 Feb 2012 16:38:12 +0000 |
Ingo Weinzierl |
Improved WQTimerange and HistoricalDischargeFacet.
|
Thu, 02 Feb 2012 15:44:13 +0000 |
Ingo Weinzierl |
Some more refactoring in XYChartGenerator and ChartGenerator; implemented necessary stuff in TimeseriesChartGenerator and return new empty instances of timeseries charts.
|
Thu, 02 Feb 2012 15:39:28 +0000 |
Ingo Weinzierl |
Added a ChartHelper class that currently contains a method to compute the xy ranges of an XYDataset.
|
Thu, 02 Feb 2012 14:00:40 +0000 |
Ingo Weinzierl |
Refactoring: moved more base code from XYChartGenerator into its parent class ChartGenerator
|
Thu, 02 Feb 2012 13:23:55 +0000 |
Felix Wolfsteller |
Cosmetics/care/refac.
|
Thu, 02 Feb 2012 12:50:33 +0000 |
Ingo Weinzierl |
Refactoring: moved more base code from XYChartGenerator into its parent class ChartGenerator.
|
Thu, 02 Feb 2012 12:26:36 +0000 |
Ingo Weinzierl |
Added a new ChartGenerator for timeseries charts and refactored some code in XYChartGenerator.
|
Thu, 02 Feb 2012 11:57:38 +0000 |
Ingo Weinzierl |
Added demo standalone app for evaluating different timeseries charts.
|
Thu, 02 Feb 2012 10:54:21 +0000 |
Raimund Renkert |
Issue 466.
|
Wed, 01 Feb 2012 15:41:11 +0000 |
Ingo Weinzierl |
Improved the 'historical discharge' calculation: implemented findValueForW().
|
Wed, 01 Feb 2012 15:00:13 +0000 |
Felix Wolfsteller |
Add some fake 'input' data for reference curve. plot references curves from input km to input km +2.
|
Wed, 01 Feb 2012 14:48:00 +0000 |
Ingo Weinzierl |
Implemented the first step of Calculation6; create Facets for each calculation results.
|
Wed, 01 Feb 2012 14:43:50 +0000 |
Ingo Weinzierl |
Added a new constructor to Timerange that takes Date objects for start and end.
|
Wed, 01 Feb 2012 14:07:38 +0000 |
Sascha L. Teichmann |
W: Forget to create ws data in constructor.
|
Wed, 01 Feb 2012 14:01:46 +0000 |
Felix Wolfsteller |
Did some modifications for debugging purposes, added output to reference-curve-state.
|
Wed, 01 Feb 2012 13:59:52 +0000 |
Felix Wolfsteller |
Register ReferenceCurve-Generators.
|
Wed, 01 Feb 2012 13:58:50 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Wed, 01 Feb 2012 13:58:09 +0000 |
Felix Wolfsteller |
Add more-or-less dummy Facet in ReferenceCurveState.
|
Wed, 01 Feb 2012 13:57:15 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Wed, 01 Feb 2012 13:56:38 +0000 |
Felix Wolfsteller |
Added reference curve facet type.
|
Wed, 01 Feb 2012 13:33:58 +0000 |
Ingo Weinzierl |
Fetch parameters for 'historical discharge curve' calculation; call Calculation6 with those information and check input parameters.
|
Wed, 01 Feb 2012 13:32:10 +0000 |
Felix Wolfsteller |
Addes stub for ReferenceCurve*Generator
|
Wed, 01 Feb 2012 12:24:05 +0000 |
Ingo Weinzierl |
Added new model classes which will be used during historical discharge curve calculation.
|
Wed, 01 Feb 2012 12:21:05 +0000 |
Ingo Weinzierl |
Added new helper methods to FLYSUtils that extract int[] and double[] from string.
|
Wed, 01 Feb 2012 11:14:24 +0000 |
Ingo Weinzierl |
Added new classes and stubs used to calculate data for historical discharge curve charts.
|
Wed, 01 Feb 2012 11:07:22 +0000 |
Ingo Weinzierl |
Removed needless imports.
|
Wed, 01 Feb 2012 09:23:44 +0000 |
Felix Wolfsteller |
Changed wording.
|
Wed, 01 Feb 2012 08:37:38 +0000 |
Felix Wolfsteller |
Avoid running into an NPE, but add warning to ease forensic.
|
Tue, 31 Jan 2012 16:26:30 +0000 |
Sascha L. Teichmann |
Fixed problems with unformatted numbers in error message.
|
Tue, 31 Jan 2012 15:43:38 +0000 |
Ingo Weinzierl |
Override getLabelFor() in HistoricalDischargeState to return an I18N string for the selected evaluation mode.
|
Tue, 31 Jan 2012 15:14:54 +0000 |
Ingo Weinzierl |
Modified some data types in the 'historical discharge curves' transitions.
|
Mon, 30 Jan 2012 14:16:03 +0000 |
Felix Wolfsteller |
Fix wrong transition type towards w_diff.
|
Mon, 30 Jan 2012 13:36:36 +0000 |
Ingo Weinzierl |
Display the name of the reference gauge in the static ui of 'historical discharge curves' calculation.
|
Mon, 30 Jan 2012 13:33:18 +0000 |
Felix Wolfsteller |
Add manual point handling for many different chart types.
|
Mon, 30 Jan 2012 13:29:07 +0000 |
Ingo Weinzierl |
Format the timerange (static ui) inserted in the 'historical discharge curves' calculation.
|
Mon, 30 Jan 2012 13:23:40 +0000 |
Ingo Weinzierl |
Bugfix: use correct order of parameters to call DefaultStateData constructor.
|
Mon, 30 Jan 2012 10:54:38 +0000 |
Ingo Weinzierl |
Fixed a bug in the winfo transitions.
|
Mon, 30 Jan 2012 10:08:25 +0000 |
Ingo Weinzierl |
Added default values for min and max items prepared by MinMaxState.
|
Mon, 30 Jan 2012 09:57:59 +0000 |
Sascha L. Teichmann |
"Bezugslinienverfahren": Add start and end km to WW to determine if kms are at gauges.
|
Mon, 30 Jan 2012 09:03:12 +0000 |
Ingo Weinzierl |
Added transitions for 'historical discharge curves' calculation.
|
Mon, 30 Jan 2012 08:37:01 +0000 |
Felix Wolfsteller |
Skip 'inactive' points in output generation.
|
Sat, 28 Jan 2012 12:50:03 +0000 |
Sascha L. Teichmann |
"Bezugslinienverfahren": Replaced normalized curve generation with a better and needed solution.
|
Fri, 27 Jan 2012 17:59:24 +0000 |
Sascha L. Teichmann |
"Bezugslinienverfahren": Implemented the on-the-flys shift to (0, 0).
|
Fri, 27 Jan 2012 17:45:26 +0000 |
Sascha L. Teichmann |
"Bezugslinienverfahren": Added facet classes.
|
Fri, 27 Jan 2012 17:17:45 +0000 |
Sascha L. Teichmann |
"Bezugslinenverfahren": Added stub loop for creating facets.
|
Fri, 27 Jan 2012 15:43:04 +0000 |
Sascha L. Teichmann |
Call the "Bezugslinienverfahren" from the WINFOArtifact.
|
Fri, 27 Jan 2012 14:21:51 +0000 |
Felix Wolfsteller |
Manual Point Theming improved.
|
Fri, 27 Jan 2012 14:19:22 +0000 |
Sascha L. Teichmann |
'Bezugslinienverfahren': Fixed stupid bug.
|
Fri, 27 Jan 2012 13:26:04 +0000 |
Ingo Weinzierl |
Added states (work is not finished yet) for the 'historical discharge curve' calculation.
|
Fri, 27 Jan 2012 13:23:56 +0000 |
Ingo Weinzierl |
Introduced an abstract MinMaxState and a concrete class IntRangeState to add min/max value pairs.
|
Fri, 27 Jan 2012 13:18:37 +0000 |
Ingo Weinzierl |
Refactored some code in DefaultState to better override the base class.
|
Fri, 27 Jan 2012 13:12:31 +0000 |
Ingo Weinzierl |
Removed useless import.
|
Fri, 27 Jan 2012 13:09:50 +0000 |
Ingo Weinzierl |
Added strings used in the calculation 'historical discharge curves'.
|
Fri, 27 Jan 2012 12:42:20 +0000 |
Sascha L. Teichmann |
Added calculation class for "Bezugslinienverfahren" to created by WINFOArtifact.
|
Fri, 27 Jan 2012 11:58:35 +0000 |
Raimund Renkert |
Added i18n support to PDF report export.
|
Fri, 27 Jan 2012 11:19:16 +0000 |
Felix Wolfsteller |
Only add one legend item for manual point themes.
|
Fri, 27 Jan 2012 11:01:13 +0000 |
Felix Wolfsteller |
Render labels of manual points in a very primitive manner.
|
Fri, 27 Jan 2012 10:45:34 +0000 |
Sascha L. Teichmann |
Refactored class hierachy to integrate model for W~W.
|
Fri, 27 Jan 2012 10:32:09 +0000 |
Felix Wolfsteller |
i18n for ManualPointsFacets.
|
Fri, 27 Jan 2012 09:49:11 +0000 |
Raimund Renkert |
Issue 138.
|
Fri, 27 Jan 2012 09:42:15 +0000 |
Raimund Renkert |
Added method that return the differences for a w-differences calculation as
|
Fri, 27 Jan 2012 07:53:03 +0000 |
Raimund Renkert |
Issue 138.
|
Thu, 26 Jan 2012 16:53:42 +0000 |
Raimund Renkert |
Issue 138.
|
Thu, 26 Jan 2012 15:38:46 +0000 |
Raimund Renkert |
Issue 138.
|
Thu, 26 Jan 2012 13:12:19 +0000 |
Felix Wolfsteller |
Render manual points in longitudinal sections.
|
Thu, 26 Jan 2012 12:56:57 +0000 |
Felix Wolfsteller |
Added acidentally ommitted ChangeLog entries.
|
Wed, 25 Jan 2012 15:12:07 +0000 |
Sascha L. Teichmann |
Transition/States: Removed superfluous condition checks.
|
Wed, 25 Jan 2012 14:14:33 +0000 |
Sascha L. Teichmann |
Added transition/state stubs for "Bezugslinienverfahren".
|
Wed, 25 Jan 2012 12:58:26 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Wed, 25 Jan 2012 10:52:58 +0000 |
Sascha L. Teichmann |
visualize-transitions.xsl: Fixed output of conditions.
|
Wed, 25 Jan 2012 10:19:30 +0000 |
Raimund Renkert |
Issue 461.
|
Tue, 24 Jan 2012 22:59:44 +0000 |
Sascha L. Teichmann |
I18N for WINFO calculation result messages.
|
Mon, 23 Jan 2012 17:39:51 +0000 |
Sascha L. Teichmann |
Handle the case in "W auf freier Strecke" where more than ne Q is related to a W.
|
Mon, 23 Jan 2012 16:55:42 +0000 |
Sascha L. Teichmann |
Added code for the simple case of "Bezugslinienverfahren" ("W auf freier Strecke").
|
Mon, 23 Jan 2012 14:18:53 +0000 |
Felix Wolfsteller |
Theoretically allow annotations on second y ais. Practically allow Q MainValues on Q Axis in Duration Curves.
|
Mon, 23 Jan 2012 11:06:06 +0000 |
Felix Wolfsteller |
Fix compilation, use StickyAxisAnnotations in AnnotationFacet.
|
Mon, 23 Jan 2012 10:44:34 +0000 |
Felix Wolfsteller |
Somewhat unified Annotation handling, use jfreechart-house-toolkit instead of custom StickyAxisAnnotation.
|
Mon, 23 Jan 2012 07:55:17 +0000 |
Felix Wolfsteller |
Employ ChartRenderingInfo when creating svg/pdf exports.
|
Fri, 20 Jan 2012 16:24:39 +0000 |
Raimund Renkert |
Added short subtitle for longitudinal section chart.
|
Fri, 20 Jan 2012 16:22:00 +0000 |
Raimund Renkert |
Removed state validation.
|
Fri, 20 Jan 2012 13:20:37 +0000 |
Felix Wolfsteller |
Added new Annotation class that prevents collisions (to replace StickyAxisAnnotation).
|
Fri, 20 Jan 2012 10:23:27 +0000 |
Felix Wolfsteller |
Made StyledSeriesBuilder more robust.
|
Fri, 20 Jan 2012 09:38:43 +0000 |
Felix Wolfsteller |
Respect rivers flow direction when looking for hyk-formations.
|
Fri, 20 Jan 2012 09:18:56 +0000 |
Raimund Renkert |
Use waterlevel state and longitudinal section generator for longitudinal
|
Fri, 20 Jan 2012 09:14:53 +0000 |
Raimund Renkert |
'New chart' for cross sections.
|
Fri, 20 Jan 2012 08:38:50 +0000 |
Felix Wolfsteller |
Add basic (text) styling for HYKS.
|
Fri, 20 Jan 2012 08:35:03 +0000 |
Felix Wolfsteller |
Cleanups.
|
Fri, 20 Jan 2012 08:31:25 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Fri, 20 Jan 2012 08:30:50 +0000 |
Felix Wolfsteller |
Added cache definition for hyks.
|
Fri, 20 Jan 2012 08:30:07 +0000 |
Felix Wolfsteller |
Made HYKFactory.Zone Serializable (and thus cachable).
|
Fri, 20 Jan 2012 08:29:24 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Fri, 20 Jan 2012 08:28:46 +0000 |
Felix Wolfsteller |
Added style for hyks.
|
Thu, 19 Jan 2012 15:43:57 +0000 |
Sascha L. Teichmann |
DistanceInfoService now uses annotations from LocationProvider.
|
Thu, 19 Jan 2012 13:43:58 +0000 |
Sascha L. Teichmann |
Use FastAnnotations for LocationProvider.
|
Thu, 19 Jan 2012 13:01:33 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Thu, 19 Jan 2012 12:59:36 +0000 |
Felix Wolfsteller |
Recommend hyks if hit by cross section out.
|
Thu, 19 Jan 2012 12:52:44 +0000 |
Felix Wolfsteller |
Somewhat improved hyk handling and rendering.
|
Thu, 19 Jan 2012 11:00:27 +0000 |
Felix Wolfsteller |
Improved HYK/Zones- handling.
|
Thu, 19 Jan 2012 10:51:20 +0000 |
Felix Wolfsteller |
Prepare improved hyk-handling.
|
Wed, 18 Jan 2012 16:54:09 +0000 |
Raimund Renkert |
'New Chart' for w-differences curve.
|
Wed, 18 Jan 2012 16:21:30 +0000 |
Raimund Renkert |
'New Chart' for discharge longitudinal section curve.
|
Wed, 18 Jan 2012 15:50:34 +0000 |
Raimund Renkert |
'New Chart' for duration curve.
|
Wed, 18 Jan 2012 14:45:24 +0000 |
Felix Wolfsteller |
Added HYKFacet.
|
Wed, 18 Jan 2012 14:36:16 +0000 |
Raimund Renkert |
'New Chart' for computed discharge curve.
|
Wed, 18 Jan 2012 13:39:16 +0000 |
Felix Wolfsteller |
Added stubby hyk infrastructure.
|
Wed, 18 Jan 2012 13:33:08 +0000 |
Felix Wolfsteller |
Add 'hyk' facet type.
|
Wed, 18 Jan 2012 13:29:41 +0000 |
Felix Wolfsteller |
Add hyk facet to compatibility list of winfo.xml
|
Wed, 18 Jan 2012 09:29:12 +0000 |
Ingo Weinzierl |
Added convinience functions to FLYSArtifact and FLYSUtils.
|
Tue, 17 Jan 2012 18:26:45 +0000 |
Sascha L. Teichmann |
Speed up the join of calculation results and the km annotations.
|
Tue, 17 Jan 2012 17:05:18 +0000 |
Sascha L. Teichmann |
Use the fast cross section lines from backend now.
|
Tue, 17 Jan 2012 09:00:30 +0000 |
Felix Wolfsteller |
Fix stateId/hash assignment in WaterlevelFacet.
|
Tue, 17 Jan 2012 08:17:50 +0000 |
Felix Wolfsteller |
Made StaticWQKmsArtifact a fully featured Artifact.
|
Tue, 17 Jan 2012 08:09:03 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Tue, 17 Jan 2012 08:01:22 +0000 |
Felix Wolfsteller |
Refactored to easier enjoy benefits of caching.
|
Tue, 17 Jan 2012 07:55:12 +0000 |
Felix Wolfsteller |
Cosmetics, added new DataFacet constructor.
|
Mon, 16 Jan 2012 17:38:39 +0000 |
Sascha L. Teichmann |
Use improved caching for cross section lines data.
|
Mon, 16 Jan 2012 15:51:46 +0000 |
Sascha L. Teichmann |
Added cached/chunked access to cross section lines. TODO: Use the FastCrossSectionLines.
|
Mon, 16 Jan 2012 13:40:32 +0000 |
Ingo Weinzierl |
Added a new calculation option for historical discharge curves.
|
Mon, 16 Jan 2012 13:29:10 +0000 |
Felix Wolfsteller |
Added certain facets to compatibility matrix.
|
Mon, 16 Jan 2012 13:27:34 +0000 |
Felix Wolfsteller |
Fixed annotations state xml.
|
Mon, 16 Jan 2012 09:34:56 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Mon, 16 Jan 2012 08:40:42 +0000 |
Ingo Weinzierl |
Enabled old floodmap calculations for output type 'map'.
|
Fri, 13 Jan 2012 12:19:53 +0000 |
Raimund Renkert |
Initial implementation for module 'new chart'.
|
Fri, 13 Jan 2012 11:41:05 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Fri, 13 Jan 2012 11:40:27 +0000 |
Felix Wolfsteller |
Avoid an unlikely NPE.
|
Fri, 13 Jan 2012 11:08:41 +0000 |
Felix Wolfsteller |
Prevent range collapsing when negative values are given.
|
Thu, 12 Jan 2012 16:59:52 +0000 |
Raimund Renkert |
Changed the MapArtifact name to 'new_map'.
|
Thu, 12 Jan 2012 16:49:00 +0000 |
Sascha L. Teichmann |
StableXYDifferenceRenderer: Added code to calculate the area of the generated polygons.
|
Thu, 12 Jan 2012 16:01:01 +0000 |
Sascha L. Teichmann |
StableXYDifferenceRenderer: Replaced System.err.println()s with proper logging.
|
Thu, 12 Jan 2012 13:41:23 +0000 |
Felix Wolfsteller |
Fix flys/issue450 (i18n: Datenkorb: longitudinal-section).
|
Thu, 12 Jan 2012 12:30:18 +0000 |
Felix Wolfsteller |
Added accidentally ommitted ChangeLog entry.
|
Thu, 12 Jan 2012 12:22:40 +0000 |
Felix Wolfsteller |
Removed call to removed functions.
|
Thu, 12 Jan 2012 12:20:56 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Wed, 11 Jan 2012 14:36:19 +0000 |
Felix Wolfsteller |
Fix flys/issue439, made annotations available via datacage.
|
Wed, 11 Jan 2012 14:32:50 +0000 |
Raimund Renkert |
Introduced new output type 'map'.
|
Wed, 11 Jan 2012 14:13:11 +0000 |
Felix Wolfsteller |
Fix flys/issue446: Added default theme for certain mainvalues.
|
Wed, 11 Jan 2012 11:54:16 +0000 |
Sascha L. Teichmann |
Removed security problem when working with map infos.
|
Wed, 11 Jan 2012 11:01:36 +0000 |
Sascha L. Teichmann |
Removed superfluous imports.
|
Wed, 11 Jan 2012 10:17:16 +0000 |
Ingo Weinzierl |
Made old calculation results available for floodmaps.
|
Tue, 10 Jan 2012 11:50:01 +0000 |
Ingo Weinzierl |
Implemented initialize() in FloodMapState to enable cloning floodmaps.
|
Tue, 10 Jan 2012 11:44:46 +0000 |
Ingo Weinzierl |
Made classes to merge Collection Outs more verbose for better debugging.
|
Mon, 09 Jan 2012 08:27:15 +0000 |
Ingo Weinzierl |
Call State.initialize() for each State of an Artifact in FLYSArtifact.
|
Sat, 07 Jan 2012 08:02:56 +0000 |
Sascha L. Teichmann |
Added missing service to invalidate the caches via the REST interface.
|
Fri, 06 Jan 2012 14:19:35 +0000 |
Ingo Weinzierl |
#298 Fixed broken auto-zoom-to-wsplgen in floodmaps.
|
Fri, 06 Jan 2012 12:55:01 +0000 |
Felix Wolfsteller |
Add cache config for static wqkms data.
|
Fri, 06 Jan 2012 12:02:10 +0000 |
Raimund Renkert |
Added initial state to map artifact to be able to advance and step back.
|
Fri, 06 Jan 2012 10:11:48 +0000 |
Felix Wolfsteller |
Fix name for certain facets loaded via datacage.
|
Fri, 06 Jan 2012 09:38:58 +0000 |
Ingo Weinzierl |
#196 Localized the WQ labels in CSV exports.
|
Fri, 06 Jan 2012 08:06:00 +0000 |
Felix Wolfsteller |
flys/issue442 (i18n: Datenkorb: flood-protections)
|
Fri, 06 Jan 2012 07:57:28 +0000 |
Felix Wolfsteller |
Fix typo in meta data, such that string can be translated in GUI.
|
Thu, 05 Jan 2012 18:35:09 +0000 |
Sascha L. Teichmann |
Added a service to invalidate caches by their names. Useful tp prevent cache inconsistencies caused by external ETL processes.
|
Thu, 05 Jan 2012 14:32:44 +0000 |
Felix Wolfsteller |
Fixed issue432 (legenditem-size ignored for area legend items).
|
Thu, 05 Jan 2012 14:29:54 +0000 |
Raimund Renkert |
Implemented new module "new map".
|
Thu, 05 Jan 2012 14:15:07 +0000 |
Ingo Weinzierl |
#444 Take care on NullPointerExceptions in getWQMode. Take 'false' as default value if no 'wq_free' item is existing.
|
Thu, 05 Jan 2012 13:55:17 +0000 |
Felix Wolfsteller |
Disable cross section cache to avoid lazy initialization issues.
|
Thu, 05 Jan 2012 13:39:58 +0000 |
Ingo Weinzierl |
#447 removed empty Outputs from Collection's attribute.
|
Thu, 05 Jan 2012 10:46:32 +0000 |
Ingo Weinzierl |
#440 Support river axes that consist of more than a single geometry.
|
Thu, 05 Jan 2012 08:34:47 +0000 |
Ingo Weinzierl |
Repaired broken legend items.
|
Wed, 04 Jan 2012 16:13:10 +0000 |
Ingo Weinzierl |
Added support for pointsize in chart themes.
|
Wed, 04 Jan 2012 15:23:26 +0000 |
Ingo Weinzierl |
Small bugfix: use correct keys for buffering min/max values in EnhancedLineAndShapeRenderer.
|
Wed, 04 Jan 2012 14:43:48 +0000 |
Ingo Weinzierl |
Moved JFreeChart specific classes to de.intevation.flys.jfree and added required imports.
|
Wed, 04 Jan 2012 14:25:10 +0000 |
Ingo Weinzierl |
Performance improvements for EnhancedLineAndShapeRenderer: buffer minimum and maximum for each series.
|
Wed, 04 Jan 2012 12:24:35 +0000 |
Ingo Weinzierl |
#393 Added a new Renderer and Options in Themes that allow displaying minimum and maximum of a chart series.
|
Tue, 03 Jan 2012 13:14:42 +0000 |
Felix Wolfsteller |
Allow styling of outline of areas.
|
Tue, 03 Jan 2012 10:12:49 +0000 |
Ingo Weinzierl |
#104 Use Wst.determineMinMaxQFree() to determine the min/max Qs at a given kilometer.
|
Tue, 03 Jan 2012 09:57:55 +0000 |
Felix Wolfsteller |
Adjust Area styles.
|
Mon, 02 Jan 2012 13:30:44 +0000 |
Ingo Weinzierl |
#370 Added a 'W at gauge' column to CSV exports if 'W at gauge' mode has been selected.
|
Mon, 02 Jan 2012 11:01:29 +0000 |
Ingo Weinzierl |
Added i18n strings used in CSV exports.
|
Mon, 02 Jan 2012 10:59:42 +0000 |
Ingo Weinzierl |
Improved the WaterlevelExporter: added range check for W/Q at gauge.
|
Mon, 02 Jan 2012 09:46:39 +0000 |
Ingo Weinzierl |
Part 2 of #125: add gaugename and Q description based on the selected WQ mode.
|
Mon, 02 Jan 2012 08:51:45 +0000 |
Ingo Weinzierl |
Removed unused imports.
|
Mon, 02 Jan 2012 08:50:50 +0000 |
Ingo Weinzierl |
Part 1 of #125: added a description for a location to the WaterlevelExport.
|
Thu, 29 Dec 2011 14:21:52 +0000 |
Ingo Weinzierl |
Added min/max values for free Qs to the Artifact's DESCRIBE document.
|
Wed, 28 Dec 2011 12:46:56 +0000 |
Ingo Weinzierl |
Fixed order to determine correct step width of Qs and Ws.
|
Wed, 28 Dec 2011 12:39:35 +0000 |
Ingo Weinzierl |
Validate user defined Qs based on the start kilometer ('Q free').
|
Wed, 28 Dec 2011 08:28:13 +0000 |
Ingo Weinzierl |
Compute better step width for W/Q input.
|
Tue, 27 Dec 2011 11:37:23 +0000 |
Ingo Weinzierl |
Some refactoring done: all Sections subclass TypeSection now to be able to use the convinience methods for string, integer, double and boolean attributes.
|
Tue, 27 Dec 2011 11:19:44 +0000 |
Ingo Weinzierl |
Make use of the export size for charts specified in ChartSettings if a chart export is requested.
|
Tue, 27 Dec 2011 10:12:14 +0000 |
Ingo Weinzierl |
Added an ExportSection to ChartSettings which provides attributes for chart 'width' and 'height'.
|
Tue, 27 Dec 2011 09:09:42 +0000 |
Ingo Weinzierl |
Make use of user defined legend font size while chart creation.
|
Tue, 27 Dec 2011 08:50:28 +0000 |
Ingo Weinzierl |
Make use of user defined axes font sizes.
|
Tue, 27 Dec 2011 08:22:07 +0000 |
Ingo Weinzierl |
Use the user defined font size to set Y axes label fonts sizes.
|
Tue, 27 Dec 2011 08:04:12 +0000 |
Ingo Weinzierl |
Added missing getYAxisWalker() in CrossSectionGenerator and create new instances of IdentfifiableNumberAxis in XYChartGenerator.createYAxis(int).
|
Tue, 27 Dec 2011 07:52:25 +0000 |
Ingo Weinzierl |
Make use of user defined axes labels during chart creation.
|
Tue, 27 Dec 2011 07:17:07 +0000 |
Ingo Weinzierl |
Use axes ranges specified in ChartSettings for zooming in charts.
|
Fri, 23 Dec 2011 15:10:13 +0000 |
Ingo Weinzierl |
Centralized the creation of new NumberAxis - new NumberAxis instances in FLYS will be from type IdentifiableNumberAxis which subclasses JFreeChart's NumberAxis.
|
Fri, 23 Dec 2011 14:24:57 +0000 |
Ingo Weinzierl |
Improved chart title and subtitle creation in ChartGenerators - all ChartGenerators make now use of title and subtitle provided by ChartSettings.
|
Fri, 23 Dec 2011 08:57:25 +0000 |
Ingo Weinzierl |
Make use of first attributes specified in the ChartSettings. NOTE: work is still in progress.
|
Fri, 23 Dec 2011 08:51:28 +0000 |
Ingo Weinzierl |
Improved ChartSettings and depending classes to avoid a lot of casting.
|
Thu, 22 Dec 2011 13:22:55 +0000 |
Ingo Weinzierl |
#242 Added header with meta information into CSV exports.
|
Thu, 22 Dec 2011 12:56:46 +0000 |
Felix Wolfsteller |
Cosmetics, removed uncalled code path.
|
Thu, 22 Dec 2011 12:54:59 +0000 |
Felix Wolfsteller |
Added ommitted ChangeLog entry.
|
Thu, 22 Dec 2011 12:53:29 +0000 |
Felix Wolfsteller |
Cosmetics, doc.
|
Thu, 22 Dec 2011 12:52:12 +0000 |
Felix Wolfsteller |
Make only newest CrossSection intially active in diagrams.
|
Thu, 22 Dec 2011 12:50:52 +0000 |
Felix Wolfsteller |
Added function to check whether a CrossSection is the 'newest' for its river.
|
Wed, 21 Dec 2011 15:44:41 +0000 |
Ingo Weinzierl |
Bugfix: repaired broken named values in exports - the last solution had bad side effects.
|
Wed, 21 Dec 2011 11:56:08 +0000 |
Felix Wolfsteller |
Better initialize cross_section.km of cross-section-artifacts.
|
Wed, 21 Dec 2011 11:29:59 +0000 |
Felix Wolfsteller |
Initialize km of cross-section artifact to a better value (not all cases covered, yet).
|
Wed, 21 Dec 2011 09:17:23 +0000 |
Ingo Weinzierl |
#252 Set titles in waterlevel exports to named main values if those are existing for given Q values.
|
Tue, 20 Dec 2011 15:14:54 +0000 |
Felix Wolfsteller |
Fix malcondition where first renderer is StableXYDifferenceRenderer.
|
Tue, 20 Dec 2011 15:06:41 +0000 |
Felix Wolfsteller |
Added a transparency setting to area theme style.
|
Tue, 20 Dec 2011 12:06:35 +0000 |
Felix Wolfsteller |
Make ('static') WKms data available for area calculations.
|
Tue, 20 Dec 2011 11:48:24 +0000 |
Ingo Weinzierl |
Changed the seperator character between Ws and Qs in the Artifact's DESCRIBE document.
|
Tue, 20 Dec 2011 11:30:00 +0000 |
Felix Wolfsteller |
Enable basicst area rendering in longitudinal section diagrams.
|
Tue, 20 Dec 2011 11:28:13 +0000 |
Felix Wolfsteller |
Refactored, make usage of blackboarddatafacet.
|
Tue, 20 Dec 2011 11:26:24 +0000 |
Felix Wolfsteller |
Cosmetics, renamed facet type.
|
Tue, 20 Dec 2011 09:02:12 +0000 |
Felix Wolfsteller |
Make Waterlevelfacet deliver data via blackbord.
|
Tue, 20 Dec 2011 09:01:29 +0000 |
Ingo Weinzierl |
Bugfix: format all Ws and Qs in WQSelect State.
|
Tue, 20 Dec 2011 09:00:51 +0000 |
Felix Wolfsteller |
New facet, will ease converting other facets to be able to contribute to area computations.
|
Tue, 20 Dec 2011 07:01:58 +0000 |
Felix Wolfsteller |
Removed obsolete imports.
|
Tue, 20 Dec 2011 07:01:08 +0000 |
Felix Wolfsteller |
Removed obsolete imports.
|
Tue, 20 Dec 2011 06:50:06 +0000 |
Felix Wolfsteller |
Let StableDifferenceRenderer create a rectangular legenditem.
|
Tue, 20 Dec 2011 06:47:08 +0000 |
Felix Wolfsteller |
Improved area rendering workflow.
|
Tue, 20 Dec 2011 06:37:41 +0000 |
Felix Wolfsteller |
Prepare ability to paint areas in longitudinal section diagrams, too (next to CrossSection diagrams).
|
Tue, 20 Dec 2011 06:26:25 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Mon, 19 Dec 2011 17:20:13 +0000 |
Felix Wolfsteller |
Refactoring, added Style accessors for area styles.
|
Mon, 19 Dec 2011 16:11:13 +0000 |
Ingo Weinzierl |
Disabled default values in Artifact's DESCRIBE document - added a system property to re-enable those default values.
|
Mon, 19 Dec 2011 15:47:34 +0000 |
Ingo Weinzierl |
#419 Fixed broken Facet name creation in discharge longitudinal sections.
|
Mon, 19 Dec 2011 10:01:17 +0000 |
Ingo Weinzierl |
#380 Validate the user selected DEM in the server.
|
Mon, 19 Dec 2011 09:08:40 +0000 |
Felix Wolfsteller |
Roll-back accidentally commited changes.
|
Mon, 19 Dec 2011 09:04:50 +0000 |
Felix Wolfsteller |
Hide deleted facets from outgenerators.
|
Mon, 19 Dec 2011 07:53:22 +0000 |
Felix Wolfsteller |
Store and access area.name data item.
|
Fri, 16 Dec 2011 14:59:31 +0000 |
Felix Wolfsteller |
Fix, accidentally added wrong factory in last commit.
|
Fri, 16 Dec 2011 14:53:53 +0000 |
Felix Wolfsteller |
Added area facets to cross section compatibility matrix.
|
Fri, 16 Dec 2011 14:48:14 +0000 |
Felix Wolfsteller |
Add area dataseries when facet delivers one.
|
Fri, 16 Dec 2011 14:42:10 +0000 |
Felix Wolfsteller |
Added simple area registering functions.
|
Fri, 16 Dec 2011 14:11:50 +0000 |
Felix Wolfsteller |
Made StaticState a bit more convenient to use.
|
Fri, 16 Dec 2011 14:09:59 +0000 |
Felix Wolfsteller |
Register AREA('area') facet type.
|
Fri, 16 Dec 2011 14:08:22 +0000 |
Felix Wolfsteller |
Register under a key on blackboard to meet assumptions by areaartifact.
|
Fri, 16 Dec 2011 14:02:59 +0000 |
Felix Wolfsteller |
Added partial area-infrastructure.
|
Fri, 16 Dec 2011 13:37:58 +0000 |
Ingo Weinzierl |
Improved the ChartSettings - now, each chart writes proper AxisSections into the ChartSettings.
|
Fri, 16 Dec 2011 11:47:57 +0000 |
Ingo Weinzierl |
Some optimizations during out() operation of FLYSArtifactCollection.
|
Fri, 16 Dec 2011 10:50:19 +0000 |
Ingo Weinzierl |
Added an INFO statement that displays the duration time for the out() operation.
|
Fri, 16 Dec 2011 10:35:08 +0000 |
Ingo Weinzierl |
Implemented the buildAxisSections() method in XYChartGenerator to include an AxisSection for the X axis.
|
Fri, 16 Dec 2011 10:25:55 +0000 |
Ingo Weinzierl |
Bugfix: add new Outputs during merge process in AttributeWriter.
|
Fri, 16 Dec 2011 10:08:39 +0000 |
Sascha L. Teichmann |
Little optimisation when writing CollectionAttributes
|
Fri, 16 Dec 2011 09:56:32 +0000 |
Ingo Weinzierl |
Parse the Settings of each Output during Collection's describe() operation.
|
Fri, 16 Dec 2011 09:19:11 +0000 |
Ingo Weinzierl |
Make reuse of the old CollectionAttribute during the describe() operation of FLYSArtifactCollection - remove the old facets only.
|
Fri, 16 Dec 2011 07:28:17 +0000 |
Ingo Weinzierl |
Added more attributes to ChartSettings AxisSection.
|
Thu, 15 Dec 2011 17:10:42 +0000 |
Ingo Weinzierl |
Added axis sections into charts Settings.
|
Thu, 15 Dec 2011 15:58:56 +0000 |
Ingo Weinzierl |
Improved the ChartSettings returned by charts - it now contains a legend specific section.
|
Thu, 15 Dec 2011 12:05:06 +0000 |
Ingo Weinzierl |
Finished the ChartSection part of the chart Settings returned by the XYChartGenerator.
|
Thu, 15 Dec 2011 10:09:02 +0000 |
Ingo Weinzierl |
Prepare the OutGenerator during the describe() operation of the FLYS Collection to enable the OutGenerator to return an initial Settings object.
|
Thu, 15 Dec 2011 09:43:54 +0000 |
Ingo Weinzierl |
Fixed wrong usage of DOM operations in Settings Attributes.
|
Wed, 14 Dec 2011 14:17:31 +0000 |
Ingo Weinzierl |
Implemented a ChartSettings with relevant Sections and Attributes for charts (NOTE: Work still in progress).
|
Wed, 14 Dec 2011 12:16:24 +0000 |
Felix Wolfsteller |
Cosmetics, docs.
|
Wed, 14 Dec 2011 10:51:00 +0000 |
Felix Wolfsteller |
Remove needless imports.
|
Wed, 14 Dec 2011 10:48:36 +0000 |
Felix Wolfsteller |
Fix/survive certain minor malconditions.
|
Wed, 14 Dec 2011 10:46:39 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Wed, 14 Dec 2011 10:44:00 +0000 |
Felix Wolfsteller |
Implement and use WaterLineArtifact interface.
|
Wed, 14 Dec 2011 10:40:30 +0000 |
Felix Wolfsteller |
Added WaterLineArtifact Interface.
|
Wed, 14 Dec 2011 10:20:56 +0000 |
Ingo Weinzierl |
Added a getSettings() operation to OutGenerator - FLYSArtifactCollection will now evaluate all available Outputs and create initial Settings using OutGenerators if the Settings for an Output is missing.
|
Tue, 13 Dec 2011 13:37:18 +0000 |
Felix Wolfsteller |
Recommend cross sections if they can be shown.
|
Tue, 13 Dec 2011 13:34:52 +0000 |
Felix Wolfsteller |
Register crosssection artifact-factory.
|
Tue, 13 Dec 2011 11:55:47 +0000 |
Ingo Weinzierl |
Introduced a CollectionAttribute class that stores the information provided by the Collection's attribute document.
|
Tue, 13 Dec 2011 09:10:48 +0000 |
Felix Wolfsteller |
Server-side of interactive cross-section diagrams.
|
Tue, 13 Dec 2011 08:56:52 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Tue, 13 Dec 2011 08:45:38 +0000 |
Ingo Weinzierl |
Removed superfluous imports.
|
Tue, 13 Dec 2011 08:43:48 +0000 |
Ingo Weinzierl |
Added a CollectionDescriptionHelper that helps generating DESCRIBE documents for Collections.
|
Mon, 12 Dec 2011 11:19:56 +0000 |
Felix Wolfsteller |
Given CrossSections a name, let crosssection facets survive.
|
Mon, 12 Dec 2011 08:15:12 +0000 |
Ingo Weinzierl |
Improved the Scheduler to be able to cancel running WSPLGEN jobs.
|
Fri, 09 Dec 2011 16:39:08 +0000 |
Felix Wolfsteller |
Add data items to StaticFLYSArtifacts description document.
|
Fri, 09 Dec 2011 15:59:30 +0000 |
Felix Wolfsteller |
Add helper function.
|
Fri, 09 Dec 2011 15:53:24 +0000 |
Felix Wolfsteller |
Configure cross_sections cache.
|
Fri, 09 Dec 2011 15:52:22 +0000 |
Felix Wolfsteller |
Added method to CrossSectionFactory to get single CrossSection, employ cache.
|
Fri, 09 Dec 2011 13:58:29 +0000 |
Felix Wolfsteller |
New CrossSectionArtifact.
|
Fri, 09 Dec 2011 10:33:40 +0000 |
Raimund Renkert |
Issue 413.
|
Thu, 08 Dec 2011 13:09:04 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Thu, 08 Dec 2011 12:01:24 +0000 |
Felix Wolfsteller |
Mainly documentation.
|
Tue, 06 Dec 2011 15:06:04 +0000 |
Sascha L. Teichmann |
Added 'Bezugslinie' to choice of calculation modes.
|
Tue, 06 Dec 2011 10:38:32 +0000 |
Felix Wolfsteller |
Further flys/issue420 fix, NaN-guard X axis extent.
|
Tue, 06 Dec 2011 10:26:07 +0000 |
Felix Wolfsteller |
Partial fix for flys/issue420 (Mosel/DischargeCurves), do survive empty datasets when calculating axis extents.
|
Tue, 06 Dec 2011 08:26:24 +0000 |
Felix Wolfsteller |
Fix flys/issue423, do not interpolate main values at gauge.
|
Mon, 05 Dec 2011 10:40:14 +0000 |
Ingo Weinzierl |
Modified prefix constants for Mapserver layers.
|
Mon, 05 Dec 2011 09:35:00 +0000 |
Ingo Weinzierl |
Various bugfixes in WSPLGEN parameterization.
|
Mon, 05 Dec 2011 09:33:20 +0000 |
Felix Wolfsteller |
Allow longitudinal_section.q facets in wdiff states output.
|
Mon, 05 Dec 2011 09:24:12 +0000 |
Felix Wolfsteller |
Refactored LongitudinalSection- and WDiff-Generators, fixed minor issues.
|
Mon, 05 Dec 2011 08:55:30 +0000 |
Ingo Weinzierl |
Added missing state titles.
|
Mon, 05 Dec 2011 08:47:49 +0000 |
Felix Wolfsteller |
Fix first axis (do not include zero).
|
Fri, 02 Dec 2011 11:01:11 +0000 |
Felix Wolfsteller |
Include state data items in description document of collection.
|
Wed, 30 Nov 2011 12:14:11 +0000 |
Felix Wolfsteller |
Added list of files to ChangeLog entry.
|
Wed, 30 Nov 2011 12:06:32 +0000 |
Sascha L. Teichmann |
Removed superfluous imports.
|
Wed, 30 Nov 2011 11:56:36 +0000 |
Sascha L. Teichmann |
Make it compile again.
|
Wed, 30 Nov 2011 10:18:38 +0000 |
Felix Wolfsteller |
Introduce pre-rendering inter-facet communication phase ('blackboard pass').
|
Wed, 30 Nov 2011 10:13:16 +0000 |
Felix Wolfsteller |
Adjusted to doOut signature change.
|
Wed, 30 Nov 2011 10:10:42 +0000 |
Felix Wolfsteller |
Changed doOut signature, side effect from blackboard feature (to come).
|
Mon, 28 Nov 2011 15:00:46 +0000 |
Felix Wolfsteller |
Fix compilation, default 0-excluding behavior of axes.
|
Mon, 28 Nov 2011 14:40:05 +0000 |
Felix Wolfsteller |
Fix documentation.
|
Mon, 28 Nov 2011 14:38:46 +0000 |
Felix Wolfsteller |
Fix LongitudinalSections multi-axes plotting behavior.
|
Mon, 28 Nov 2011 14:36:56 +0000 |
Felix Wolfsteller |
Refactored XYChartGenerator to have better working multi-axes features.
|
Fri, 25 Nov 2011 18:52:11 +0000 |
Sascha L. Teichmann |
Added the implementation of the 'Bezugslinienverfahren'.
|
Fri, 25 Nov 2011 17:27:40 +0000 |
Sascha L. Teichmann |
Refactored the code of the 'berechnete Abflusskurve' to be reusable in the 'Bezugslinienverfahren'.
|
Fri, 25 Nov 2011 15:50:31 +0000 |
Sascha L. Teichmann |
'W auf freier Strecke' calculation. Fetch corresponding Qs for given Ws from the WST model
|
Fri, 25 Nov 2011 12:55:53 +0000 |
Felix Wolfsteller |
Fix bug when adding Q Facet data to LongitudinalSection plots.
|
Fri, 25 Nov 2011 09:39:09 +0000 |
Felix Wolfsteller |
Added handling of empty plots.
|
Fri, 25 Nov 2011 08:42:44 +0000 |
Felix Wolfsteller |
When having axis in diagrams, always have one on the left.
|
Thu, 24 Nov 2011 11:03:33 +0000 |
Felix Wolfsteller |
Better use multiple axis feature in chart generators.
|
Thu, 24 Nov 2011 10:59:40 +0000 |
Felix Wolfsteller |
Fix legend and themeing with new multiaxis feature.
|
Thu, 24 Nov 2011 07:20:46 +0000 |
Felix Wolfsteller |
Allow more than two datasets and more flexibility with axes in plots. Based on patch by S. Teichmann.
|
Wed, 23 Nov 2011 14:09:29 +0000 |
Felix Wolfsteller |
Cosmetics, docs.
|
Wed, 23 Nov 2011 14:04:01 +0000 |
Felix Wolfsteller |
(Minor) cosmetics, docs.
|
Wed, 23 Nov 2011 11:09:14 +0000 |
Felix Wolfsteller |
Minor cosmetic (doc).
|
Wed, 23 Nov 2011 11:07:34 +0000 |
Felix Wolfsteller |
Resolved TODO about caching certain WstValueTables.
|
Tue, 22 Nov 2011 20:04:46 +0000 |
Ingo Weinzierl |
Added a new Artifact to enable users to add external WMS layers to floodmaps.
|
Tue, 22 Nov 2011 14:00:55 +0000 |
Felix Wolfsteller |
Fixed flys/411 (Oracle max expressions for annotations query).
|
Tue, 22 Nov 2011 13:39:23 +0000 |
Felix Wolfsteller |
Optimize query to fix annotations fetching on oracle, by Sascha Teichmann.
|
Thu, 17 Nov 2011 11:38:16 +0000 |
Felix Wolfsteller |
Added interpolated wkms to compatibility matrix for computed discharge curve diagrams.
|
Thu, 17 Nov 2011 09:19:55 +0000 |
Felix Wolfsteller |
Use importData convenvience function.
|
Thu, 17 Nov 2011 09:18:03 +0000 |
Felix Wolfsteller |
Add annotaitons for STATIC_WKMS_INTERPOL facets in Computed Discharge Curves.
|
Thu, 17 Nov 2011 09:16:20 +0000 |
Felix Wolfsteller |
Give flood* artifacts Facets the STATIC_WKMS_INTERPOL FacetType.
|
Thu, 17 Nov 2011 09:14:42 +0000 |
Felix Wolfsteller |
Prevent ArrayIndexOutOfBounds, log method entry.
|
Thu, 17 Nov 2011 09:13:26 +0000 |
Felix Wolfsteller |
Added new STATIC_WKMS_INTERPOL Facet Type.
|
Wed, 16 Nov 2011 15:55:24 +0000 |
Ingo Weinzierl |
Avoid WMS layer names that begin with digits to ensure valid WMS GetFeatureInfo responses.
|
Wed, 16 Nov 2011 15:53:52 +0000 |
Felix Wolfsteller |
Extended DC conf to offer w/q kind of data (currently used in computed discharge curve diagr. only).
|
Wed, 16 Nov 2011 15:49:35 +0000 |
Felix Wolfsteller |
Handle STATIC_WQ_ANNOTATION type facets in Computed Discharge Curve Diagrams.
|
Wed, 16 Nov 2011 15:48:01 +0000 |
Felix Wolfsteller |
Differentiate between wsts whose name starts with 'height' and all others.
|
Wed, 16 Nov 2011 15:46:11 +0000 |
Felix Wolfsteller |
Extended compatibility matrices.
|
Wed, 16 Nov 2011 15:45:16 +0000 |
Felix Wolfsteller |
Added new STATIC_WQ_ANNOTATIONS Facet Type.
|
Wed, 16 Nov 2011 15:28:29 +0000 |
Ingo Weinzierl |
Added a Facet attribute for WMSLayerFacets that determines if a facet (WMS layer) is queryable via WMS GetFeatureInfo request.
|
Wed, 16 Nov 2011 14:50:19 +0000 |
Felix Wolfsteller |
Use single column wst interpolators from wqkmsinterpolartifact.
|
Wed, 16 Nov 2011 14:47:02 +0000 |
Felix Wolfsteller |
Added methods to create WstValueTables ('interpolators') for specific columns of wsts.
|
Wed, 16 Nov 2011 14:44:24 +0000 |
Felix Wolfsteller |
Added Point Stlye for other.wq data.
|
Wed, 16 Nov 2011 10:58:48 +0000 |
Sascha L. Teichmann |
Do not re-evaluate constant size() in for-loops.
|
Wed, 16 Nov 2011 10:25:16 +0000 |
Felix Wolfsteller |
Respect position for computed discharge curve when interpolating WQs for e.g. for fixations.
|
Wed, 16 Nov 2011 09:43:58 +0000 |
Felix Wolfsteller |
Recommend fixations for computed discharge curves.
|
Wed, 16 Nov 2011 09:42:35 +0000 |
Felix Wolfsteller |
Register wqinterpol artifact factory in configuration.
|
Wed, 16 Nov 2011 09:35:13 +0000 |
Felix Wolfsteller |
Added omitted ChangeLog entry.
|
Wed, 16 Nov 2011 09:21:34 +0000 |
Felix Wolfsteller |
Handle interpolated WQ data in Computed Discharge Curve Diagram.
|
Wed, 16 Nov 2011 09:15:25 +0000 |
Felix Wolfsteller |
Adjusted implementation to match implementation in StaticWKmsArtifact.
|
Wed, 16 Nov 2011 09:12:54 +0000 |
Felix Wolfsteller |
Removed logging noise, find better suited rows for W interpolation.
|
Wed, 16 Nov 2011 09:11:14 +0000 |
Felix Wolfsteller |
Employ cache for WstValueTables that have been fetched by wst_id.
|
Wed, 16 Nov 2011 09:10:07 +0000 |
Felix Wolfsteller |
Fix and use SQL statement to fetch wst-names.
|
Tue, 15 Nov 2011 14:48:53 +0000 |
Felix Wolfsteller |
New Facet and Artifact to access interpolated W/Q data (todo-rich).
|
Tue, 15 Nov 2011 14:45:57 +0000 |
Felix Wolfsteller |
New convenience function to copy data from one artifact to another.
|
Tue, 15 Nov 2011 14:43:50 +0000 |
Felix Wolfsteller |
New method to get interpolator for given wst_ids, also prepopulate arrays with NaNs.
|
Tue, 15 Nov 2011 14:37:21 +0000 |
Felix Wolfsteller |
Fix definition.
|
Tue, 15 Nov 2011 14:32:42 +0000 |
Felix Wolfsteller |
Added function to get name/description of Wst.
|
Tue, 15 Nov 2011 14:17:41 +0000 |
Felix Wolfsteller |
Added new FacetType 'STATIC_WQ'.
|
Tue, 15 Nov 2011 14:15:31 +0000 |
Felix Wolfsteller |
(Picky) cosmetics.
|
Tue, 15 Nov 2011 14:10:21 +0000 |
Felix Wolfsteller |
Added translations for Mosel, Elbe and Saar.
|
Tue, 15 Nov 2011 14:05:50 +0000 |
Felix Wolfsteller |
Added new (at fixed columns) interpolation mechanism.
|
Mon, 14 Nov 2011 10:11:57 +0000 |
Felix Wolfsteller |
Minor doc.
|
Sun, 13 Nov 2011 15:29:18 +0000 |
Sascha L. Teichmann |
Removed dead ';' from empty bodies.
|
Sun, 13 Nov 2011 15:11:23 +0000 |
Sascha L. Teichmann |
StableXYDifferenceRenderer: More efficient use of TDoubleArrayList
|
Sun, 13 Nov 2011 14:02:35 +0000 |
Sascha L. Teichmann |
StableXYDifferenceRenderer: Make rendering work with definition holes.
|
Sat, 12 Nov 2011 22:26:27 +0000 |
Sascha L. Teichmann |
CrossSectionApp: Draw water, too.
|
Sat, 12 Nov 2011 12:07:39 +0000 |
Sascha L. Teichmann |
Last commit broke due to network error.
|
Sat, 12 Nov 2011 12:05:37 +0000 |
Sascha L. Teichmann |
CrossSectionApp: draw ground with StableXYDifferenceRenderer
|
Fri, 11 Nov 2011 12:07:06 +0000 |
Felix Wolfsteller |
Include computed discharge curves in dc conf.
|
Fri, 11 Nov 2011 11:59:41 +0000 |
Felix Wolfsteller |
Somewhat unified user-part of dc config.
|
Fri, 11 Nov 2011 11:28:15 +0000 |
Ingo Weinzierl |
Added support for fillcolors of polygons in floodmaps.
|
Fri, 11 Nov 2011 11:00:31 +0000 |
Ingo Weinzierl |
Set correct Mapserver attribute name to adjust the width of a line.
|
Fri, 11 Nov 2011 09:43:36 +0000 |
Ingo Weinzierl |
Added support for labels in Mapserver layers and options to modify its style.
|
Fri, 11 Nov 2011 07:59:42 +0000 |
Felix Wolfsteller |
Extended dc conf.
|
Fri, 11 Nov 2011 07:33:00 +0000 |
Ingo Weinzierl |
Removed needless imports.
|
Thu, 10 Nov 2011 14:25:56 +0000 |
Ingo Weinzierl |
Added new WMSFixpointsArtifact for displaying fixpoints in maps.
|
Thu, 10 Nov 2011 14:06:49 +0000 |
Felix Wolfsteller |
Refactored datacage conf to (re)use macros.
|
Thu, 10 Nov 2011 13:54:24 +0000 |
Ingo Weinzierl |
Added new WMSBuildingsArtifact for displaying buildings in maps.
|
Thu, 10 Nov 2011 13:40:05 +0000 |
Ingo Weinzierl |
Added new WMSLineArtifact for displaying lines in maps.
|
Thu, 10 Nov 2011 11:48:54 +0000 |
Felix Wolfsteller |
Adjusted DC for heightmarks (and other) in discharge longitudinal sections.
|
Thu, 10 Nov 2011 11:37:51 +0000 |
Felix Wolfsteller |
Have old_data in dc for discharge_longitudinal_sections.
|
Thu, 10 Nov 2011 11:31:48 +0000 |
Felix Wolfsteller |
Handle WQKm and WKm Facets in Discharge Longitudinal Sections.
|
Thu, 10 Nov 2011 11:30:05 +0000 |
Felix Wolfsteller |
Helper for FacetTypes.
|
Thu, 10 Nov 2011 11:21:20 +0000 |
Felix Wolfsteller |
Revert/apply accidental/corrected commit.
|
Thu, 10 Nov 2011 10:29:01 +0000 |
Felix Wolfsteller |
Made Discharge Longitudinal Section out compatible with Annotations.
|
Thu, 10 Nov 2011 10:26:59 +0000 |
Felix Wolfsteller |
Extracted Annotations-Macro in dc conf, recommend Annotations for discharge
|
Thu, 10 Nov 2011 10:20:40 +0000 |
Felix Wolfsteller |
Handle Annotation Facets in DischargeLongitudinalSection diagrams.
|
Thu, 10 Nov 2011 10:18:31 +0000 |
Felix Wolfsteller |
Cosmetics, resolve code duplicate.
|
Thu, 10 Nov 2011 10:13:57 +0000 |
Felix Wolfsteller |
Improved logging to include exception in fail case of spline interpolation of wst.
|
Thu, 10 Nov 2011 10:12:25 +0000 |
Felix Wolfsteller |
Improved loggin in error case for dc XPath expression resolution.
|
Thu, 10 Nov 2011 09:37:59 +0000 |
Sascha L. Teichmann |
CrossSectionApp: split curves in separated datasets to make them renderable with different renderers.
|
Wed, 09 Nov 2011 16:49:58 +0000 |
Ingo Weinzierl |
Added new WMSFloodplainArtifact for displaying floodplains in maps.
|
Wed, 09 Nov 2011 16:28:29 +0000 |
Ingo Weinzierl |
Added new WMSCatchmentArtifact for displaying catchments in maps.
|
Wed, 09 Nov 2011 16:07:07 +0000 |
Ingo Weinzierl |
Added new WMSHwsArtifact for displaying flood protection works.
|
Wed, 09 Nov 2011 15:00:29 +0000 |
Ingo Weinzierl |
Replaced the dbconnection.include used by Mapserver - these information are provided by LayerInfo objects now, which reduces config overhead.
|
Wed, 09 Nov 2011 14:02:15 +0000 |
Felix Wolfsteller |
Handle Height marks with point styles in WDifferences Diagrams.
|
Wed, 09 Nov 2011 13:45:39 +0000 |
Felix Wolfsteller |
Let Q Duration Curves enter life inactive.
|
Wed, 09 Nov 2011 13:17:55 +0000 |
Felix Wolfsteller |
Recommend mainvalues for Duration Curve Diagrams, minor refactoring.
|
Wed, 09 Nov 2011 13:13:01 +0000 |
Felix Wolfsteller |
Handle MainValue Facets in Duration Curve Diagrams.
|
Wed, 09 Nov 2011 13:06:08 +0000 |
Felix Wolfsteller |
Refactored, move doMainValueAnnotations to XYChartGenerator.
|
Wed, 09 Nov 2011 12:55:13 +0000 |
Felix Wolfsteller |
Cosmetics, removed duplicate code.
|
Wed, 09 Nov 2011 12:48:36 +0000 |
Felix Wolfsteller |
Minor cosmetics and let facets be inactive in duration curve diagrams.
|
Wed, 09 Nov 2011 12:38:02 +0000 |
Felix Wolfsteller |
Allow wqkms in many outputs, mainvalues in duration curves.
|
Wed, 09 Nov 2011 10:48:51 +0000 |
Ingo Weinzierl |
Made the floodmap compatible with an Oracle database.
|
Tue, 08 Nov 2011 12:06:43 +0000 |
Felix Wolfsteller |
Fix flys/issue406 (~missing themes).
|
Tue, 08 Nov 2011 12:02:10 +0000 |
Felix Wolfsteller |
Fix flys/issue405 (Datacage: Recommendations get loaded twice).
|
Tue, 08 Nov 2011 11:51:06 +0000 |
Ingo Weinzierl |
Added a debug statement that prints out an exception.
|
Tue, 08 Nov 2011 11:50:08 +0000 |
Ingo Weinzierl |
Removed orphanded datacage config which is no longer loadable.
|
Mon, 07 Nov 2011 16:40:32 +0000 |
Ingo Weinzierl |
Added the 'post-describe' hook for Artifacts.
|
Mon, 07 Nov 2011 12:37:41 +0000 |
Felix Wolfsteller |
Minor refactoring in preparation of generation of interpolators (WstValueTable) for static WQKms.
|
Mon, 07 Nov 2011 10:48:13 +0000 |
Felix Wolfsteller |
Cosmetics, doc.
|
Mon, 07 Nov 2011 10:43:51 +0000 |
Felix Wolfsteller |
Catch more specific Exception in FLYSArtifactCollection.
|
Fri, 04 Nov 2011 14:09:05 +0000 |
Ingo Weinzierl |
Added datacage configuration, loader (Artifact and State) and a theme for cross section tracks.
|
Fri, 04 Nov 2011 13:29:15 +0000 |
Felix Wolfsteller |
Re-enabled mainvalue-recommendation for computed discharge curves.
|
Fri, 04 Nov 2011 13:23:39 +0000 |
Felix Wolfsteller |
Extract output names from artifact, not from state. Important when querying recommendations for an artifact with these outputs.
|
Fri, 04 Nov 2011 12:21:12 +0000 |
Ingo Weinzierl |
Removed DEMs from floodmap datacage configuration.
|
Fri, 04 Nov 2011 12:15:03 +0000 |
Ingo Weinzierl |
Refactored the RiverAxisArtifact and its State - uses the same base as WMSKmArtifact now.
|
Fri, 04 Nov 2011 11:59:08 +0000 |
Felix Wolfsteller |
Prevent empty output-nodes in flyscollections attributes.
|
Fri, 04 Nov 2011 10:58:44 +0000 |
Ingo Weinzierl |
Create layers for barrier lines and polygons only if they are really existing.
|
Fri, 04 Nov 2011 10:57:47 +0000 |
Felix Wolfsteller |
Disable recommendations of mainvalues for discharge curves.
|
Fri, 04 Nov 2011 08:59:42 +0000 |
Felix Wolfsteller |
Added new optional condition for theme-mappings: the output name.
|
Fri, 04 Nov 2011 08:52:33 +0000 |
Felix Wolfsteller |
Defined default themes for other.w(q)kms .
|
Fri, 04 Nov 2011 08:18:41 +0000 |
Felix Wolfsteller |
Minor comsetics.
|
Thu, 03 Nov 2011 13:22:55 +0000 |
Felix Wolfsteller |
Added 'static' wqkms data access.
|
Thu, 03 Nov 2011 12:28:38 +0000 |
Sascha L. Teichmann |
Added a dataset to zero mapper to circumvent shortcommings in XYDifferenceRenderer.
|
Thu, 03 Nov 2011 10:32:17 +0000 |
Sascha L. Teichmann |
Added a copy of JFreeChart's XYDifferenceRenderer
|
Thu, 03 Nov 2011 10:25:23 +0000 |
Felix Wolfsteller |
Changed theme-mapping mechanism to include further condition (on master-artifacts attributes), added point themes for longitudinal.ws for calculations at locations.
|
Thu, 03 Nov 2011 10:19:29 +0000 |
Felix Wolfsteller |
Added ARTIFACT key to FLYSContextm, documentation.
|
Thu, 03 Nov 2011 10:14:51 +0000 |
Sascha L. Teichmann |
CrossSectionApp: Re-enabled dumping data to disk.
|
Thu, 03 Nov 2011 09:58:04 +0000 |
Sascha L. Teichmann |
Simplified code in Datacage builder by using the new pair.
|
Thu, 03 Nov 2011 09:47:52 +0000 |
Sascha L. Teichmann |
Rewritten CrossSectionApp to be useful as test bed for 'Raum/Flaeche' operations.
|
Wed, 02 Nov 2011 15:02:23 +0000 |
Ingo Weinzierl |
Improved styles of WMS layers.
|
Wed, 02 Nov 2011 13:41:39 +0000 |
Felix Wolfsteller |
Apply point theme to heightmark data imported via datacage to longitudinal section diagram.
|
Wed, 02 Nov 2011 12:16:32 +0000 |
Felix Wolfsteller |
Cosmetics, doc.
|
Wed, 02 Nov 2011 12:15:58 +0000 |
Felix Wolfsteller |
Fix bug where wrong attribute was set.
|
Wed, 02 Nov 2011 12:12:48 +0000 |
Felix Wolfsteller |
Refactored to allow mainvalues in discharge curve diagrams, too.
|
Wed, 02 Nov 2011 11:30:26 +0000 |
Felix Wolfsteller |
Removed logger/debuggin noise.
|
Wed, 02 Nov 2011 11:27:04 +0000 |
Felix Wolfsteller |
Pass output name to artifacts getInitialFacetActivity, prevent gaps in collection attributes outputs facets positions.
|
Wed, 02 Nov 2011 11:21:57 +0000 |
Felix Wolfsteller |
Give outputname to artifacts getInitialFacetActivity, generate second pair of MainvalueFacets for discharge curves.
|
Wed, 02 Nov 2011 11:15:00 +0000 |
Felix Wolfsteller |
Define newish facet types (mainvalues for discharge curves).
|
Wed, 02 Nov 2011 11:12:08 +0000 |
Felix Wolfsteller |
Configured discharge curve outs to allow inclusion of mainvalue facets.
|
Tue, 01 Nov 2011 15:33:54 +0000 |
Ingo Weinzierl |
Determine correct bounding box a KMs WMS layer.
|
Tue, 01 Nov 2011 14:54:59 +0000 |
Ingo Weinzierl |
Added datacage config and loaders for KM WMS layer in floodmaps.
|
Tue, 01 Nov 2011 14:24:30 +0000 |
Felix Wolfsteller |
Fix incompilability.
|
Tue, 01 Nov 2011 12:23:59 +0000 |
Felix Wolfsteller |
Minor preparations for WINFO/CrossSection to handle multiple cross-sections.
|
Tue, 01 Nov 2011 10:40:05 +0000 |
Felix Wolfsteller |
Corrected CrossSection diagram/out to include one facet per computed waterlevel.
|
Mon, 31 Oct 2011 17:05:14 +0000 |
Sascha L. Teichmann |
Polygon2D: Generate polygons for trivial cases.
|
Mon, 31 Oct 2011 16:04:59 +0000 |
Sascha L. Teichmann |
Polygon2D: made it compilable again.
|
Mon, 31 Oct 2011 15:54:02 +0000 |
Sascha L. Teichmann |
Polygon2D: More code to build polygons from curve.
|
Mon, 31 Oct 2011 11:32:11 +0000 |
Sascha L. Teichmann |
Polygon2D: Handle start points when building polygons. Work in progress.
|
Mon, 31 Oct 2011 10:03:32 +0000 |
Sascha L. Teichmann |
Polygon2D: moved 2D vector operation to separate class.
|
Mon, 31 Oct 2011 10:01:08 +0000 |
Sascha L. Teichmann |
Small loop optimization
|
Sun, 30 Oct 2011 19:28:59 +0000 |
Sascha L. Teichmann |
Interim checkin for polygon calculation.
|
Fri, 28 Oct 2011 16:59:03 +0000 |
Sascha L. Teichmann |
Work in progress: Added polygon to help creating 'Raum/Flaeche' renderers.
|
Fri, 28 Oct 2011 14:42:24 +0000 |
Ingo Weinzierl |
Initial commit to support styles in maps.
|
Fri, 28 Oct 2011 13:48:02 +0000 |
Ingo Weinzierl |
Enabled the MapGenerator to create WMS layers with database datastore - riveraxis is the first layer that is no longer fetched from static WMS service but from user specific one.
|
Fri, 28 Oct 2011 13:39:37 +0000 |
Felix Wolfsteller |
Added new StyledSeriesBuilder class and use it when adding points to XYSeries (in diagram generation).
|
Fri, 28 Oct 2011 12:41:10 +0000 |
Felix Wolfsteller |
Add static data conf to w-difference / datacage.
|
Fri, 28 Oct 2011 12:18:00 +0000 |
Felix Wolfsteller |
Load and display annotations in w-difference diagrams, minor polishing.
|
Fri, 28 Oct 2011 12:09:58 +0000 |
Felix Wolfsteller |
Avoid NPE when compatibility matrix is empty for given output.
|
Fri, 28 Oct 2011 10:24:26 +0000 |
Felix Wolfsteller |
Cosmetics, added simpler constructor for StaticState.
|
Fri, 28 Oct 2011 10:20:00 +0000 |
Felix Wolfsteller |
Add annotations to allowed facets for longitudinal_section and w_differences outputs.
|
Fri, 28 Oct 2011 10:04:22 +0000 |
Felix Wolfsteller |
Use compatibility matrix when creating collections output.
|
Fri, 28 Oct 2011 09:59:47 +0000 |
Felix Wolfsteller |
Cosmetics and refactoring in FLYSArtifactCollection.
|
Fri, 28 Oct 2011 09:55:59 +0000 |
Felix Wolfsteller |
Added method to FLYSArtifact to access ids of states.
|
Fri, 28 Oct 2011 09:39:03 +0000 |
Ingo Weinzierl |
Re-create FLYS mapfile when FloodMapState.endOfLife() is called.
|
Fri, 28 Oct 2011 09:26:54 +0000 |
Ingo Weinzierl |
Modified the process to create mapfiles.
|
Fri, 28 Oct 2011 09:22:34 +0000 |
Felix Wolfsteller |
Cosmetics, docs.
|
Fri, 28 Oct 2011 09:08:48 +0000 |
Felix Wolfsteller |
Let Output and Attribute Parsers collect Facets during processing.
|
Fri, 28 Oct 2011 09:02:48 +0000 |
Felix Wolfsteller |
Fixed incorrect ChangeLog-merge.
|
Fri, 28 Oct 2011 09:00:51 +0000 |
Felix Wolfsteller |
Extracet getFlysContext from FLYSArtifact to FLYSUtils.
|
Fri, 28 Oct 2011 08:52:46 +0000 |
Ingo Weinzierl |
Made flys-artifacts compilable again.
|
Fri, 28 Oct 2011 08:36:32 +0000 |
Ingo Weinzierl |
Improved the MapfileGenerator. It offers methods to create barrier and wsplgen layer files for mapserver.
|
Fri, 28 Oct 2011 05:54:25 +0000 |
Ingo Weinzierl |
Added a new MapGenerator which only returns a map configuration document at the moment (work still in progress).
|
Thu, 27 Oct 2011 14:04:04 +0000 |
Felix Wolfsteller |
Prevent recommendation of not yet loadable data.
|
Thu, 27 Oct 2011 09:42:49 +0000 |
Felix Wolfsteller |
Reduce logging noise (downgrade an 'error' to 'debug').
|
Thu, 27 Oct 2011 09:32:05 +0000 |
Felix Wolfsteller |
Restore mapping of state id to facets (revert, rev 3083 and 3088).
|
Wed, 26 Oct 2011 12:55:32 +0000 |
Felix Wolfsteller |
Cosmetics, documentation.
|
Wed, 26 Oct 2011 12:54:22 +0000 |
Felix Wolfsteller |
Prepare rendering of added other (static) WKms and Differences in LongitudinalSection Diagrams.
|
Wed, 26 Oct 2011 12:47:37 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Wed, 26 Oct 2011 12:45:34 +0000 |
Felix Wolfsteller |
Store Facets without association to state id.
|
Wed, 26 Oct 2011 12:42:20 +0000 |
Felix Wolfsteller |
Adjusted winfo.xml to new semantics.
|
Wed, 26 Oct 2011 12:23:47 +0000 |
Felix Wolfsteller |
Do not store association of states to facets, let artifacts keep facets in a pure list.
|
Wed, 26 Oct 2011 12:03:59 +0000 |
Felix Wolfsteller |
Added DC configuration to load additional data in longitudinal section.
|
Wed, 26 Oct 2011 08:15:24 +0000 |
Felix Wolfsteller |
Cosmetics, docs.
|
Tue, 25 Oct 2011 14:41:34 +0000 |
Felix Wolfsteller |
In LongitudinalSection-Diagram, Qs enter inactive.
|
Tue, 25 Oct 2011 14:32:30 +0000 |
Felix Wolfsteller |
Fix broken dc config.
|
Tue, 25 Oct 2011 13:08:31 +0000 |
Felix Wolfsteller |
Configured datacage to hand out id of artifact that can produce the w_diff.
|
Tue, 25 Oct 2011 12:43:58 +0000 |
Felix Wolfsteller |
Restored correct drawing behavior for Annotations.
|
Tue, 25 Oct 2011 12:37:05 +0000 |
Felix Wolfsteller |
Include differences in datacage.
|
Tue, 25 Oct 2011 12:13:04 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Mon, 24 Oct 2011 10:40:37 +0000 |
Felix Wolfsteller |
Added accidentally ommitted ChangeLog entry for last commit.
|
Fri, 21 Oct 2011 15:19:49 +0000 |
Sascha L. Teichmann |
Added some simple caching for themes. Only used in sticky annotations by now.
|
Fri, 21 Oct 2011 14:02:07 +0000 |
Raimund Renkert |
Apply the attributes 'showpoints' and 'showline'.
|
Fri, 21 Oct 2011 13:25:24 +0000 |
Sascha L. Teichmann |
Added /dev/null Graphics2D object to be used in the info rendering pass of the diagram generation.
|
Fri, 21 Oct 2011 08:21:45 +0000 |
Raimund Renkert |
Draw the text background and use orientation attribute.
|
Fri, 21 Oct 2011 08:19:26 +0000 |
Raimund Renkert |
Renamed text background attribute and parse text attributes correctly.
|
Thu, 20 Oct 2011 17:14:24 +0000 |
Sascha L. Teichmann |
Added Service Service to lookup the Nth nearest neighbors for a set of given cross section ids and kms.
|
Thu, 20 Oct 2011 14:26:22 +0000 |
Raimund Renkert |
Added methods to extract further attributes from theme.
|
Thu, 20 Oct 2011 13:45:45 +0000 |
Ingo Weinzierl |
Improved the Themes: we now support special themes for facets which need to match a given pattern string.
|
Thu, 20 Oct 2011 13:29:54 +0000 |
Raimund Renkert |
Added new theme attributes.
|
Wed, 19 Oct 2011 16:06:01 +0000 |
Felix Wolfsteller |
Fix NPE in WDiff-diagram because no ranges present in masterartifact.
|
Wed, 19 Oct 2011 16:04:40 +0000 |
Felix Wolfsteller |
Fix setting of masterartifact in flyscollections.
|
Wed, 19 Oct 2011 15:32:22 +0000 |
Ingo Weinzierl |
Prepared the DESCRIBE document of a WINFO Artifact so that named main values for Qs are displayed.
|
Wed, 19 Oct 2011 15:05:47 +0000 |
Raimund Renkert |
ComputedDischargeCurveW and ComputedDischargeCurveQ inherit attributes from
|
Wed, 19 Oct 2011 14:53:33 +0000 |
Sascha L. Teichmann |
Fix for flys/issue316
|
Wed, 19 Oct 2011 14:00:36 +0000 |
Ingo Weinzierl |
Improved the title creation of WSP Q and W facets - named main values are taken into account while title creation.
|
Wed, 19 Oct 2011 13:51:16 +0000 |
Felix Wolfsteller |
Fix datacage to let client load flood-protection and zuss.
|
Wed, 19 Oct 2011 11:39:46 +0000 |
Raimund Renkert |
Apply theme attributes to axis annotation.
|
Wed, 19 Oct 2011 11:00:13 +0000 |
Felix Wolfsteller |
Create label from data String to revive names in client.
|
Wed, 19 Oct 2011 09:59:07 +0000 |
Sascha L. Teichmann |
XYChartGenerator: Do not crash if no zoom axis given
|
Wed, 19 Oct 2011 09:43:04 +0000 |
Ingo Weinzierl |
Enabled support for PDF and SVG chart exports.
|
Tue, 18 Oct 2011 15:34:07 +0000 |
Felix Wolfsteller |
Simplified handling of W(Q)Kms data to plot.
|
Tue, 18 Oct 2011 15:28:02 +0000 |
Felix Wolfsteller |
In WDiff-diagram generation respect other.wkms facets (flood-prot, zus).
|
Tue, 18 Oct 2011 15:26:14 +0000 |
Felix Wolfsteller |
Handle StaticWKmsArtifacts in WDifferencesState.
|
Tue, 18 Oct 2011 15:22:33 +0000 |
Felix Wolfsteller |
Also display the 'zus' in wdiff-input datacage.
|
Tue, 18 Oct 2011 15:17:11 +0000 |
Raimund Renkert |
Added new virtual theme for text and let 'Annotations' inherit from the new
|
Tue, 18 Oct 2011 15:00:43 +0000 |
Felix Wolfsteller |
Give StaticWKmsArtifacts proper names, and pre-deselect them.
|
Tue, 18 Oct 2011 14:25:50 +0000 |
Felix Wolfsteller |
Adjusted datacage-configuration to present flood-protections in certain case.
|
Tue, 18 Oct 2011 14:20:37 +0000 |
Felix Wolfsteller |
Register staticwkms factory to spawn StaticWKms-Artifacts.
|
Tue, 18 Oct 2011 14:03:43 +0000 |
Felix Wolfsteller |
Fetch name of static WKms.
|
Tue, 18 Oct 2011 13:28:39 +0000 |
Felix Wolfsteller |
Store parameterization in data, not in fields.
|
Tue, 18 Oct 2011 13:26:15 +0000 |
Felix Wolfsteller |
Add convenience method to add default data as string.
|
Tue, 18 Oct 2011 12:56:12 +0000 |
Felix Wolfsteller |
Added new Artifact and Facet to access 'static' data via WKmsFactory.
|
Tue, 18 Oct 2011 12:44:02 +0000 |
Felix Wolfsteller |
Added WKmsFactory.
|
Tue, 18 Oct 2011 12:31:36 +0000 |
Felix Wolfsteller |
Cosmetics, docs.
|
Tue, 18 Oct 2011 12:27:49 +0000 |
Felix Wolfsteller |
Added constructor that will be needed in creation of WKms for 'static' data.
|
Tue, 18 Oct 2011 10:26:27 +0000 |
Felix Wolfsteller |
Fix missing annotations ('Streckenfavoriten') style.
|
Mon, 17 Oct 2011 16:04:14 +0000 |
Sascha L. Teichmann |
FLYSArtifactCollection: Small optimizations
|
Mon, 17 Oct 2011 15:53:59 +0000 |
Ingo Weinzierl |
FLYSArtifactCollection.ThemeList makes now use of ManagedDomFacet to read all attributes of a Facet.
|
Mon, 17 Oct 2011 15:53:03 +0000 |
Sascha L. Teichmann |
flys/issue314: Variables in datacage are now case insensitive.
|
Mon, 17 Oct 2011 14:55:45 +0000 |
Ingo Weinzierl |
Added support for removing themes from output.
|
Mon, 17 Oct 2011 13:00:24 +0000 |
Raimund Renkert |
Apply line type to styled themes.
|
Mon, 17 Oct 2011 11:04:53 +0000 |
Ingo Weinzierl |
Bugfix: #226 Set the upper bound of duration curve charts to 364.
|
Mon, 17 Oct 2011 10:47:36 +0000 |
Ingo Weinzierl |
#253 Modified the title creation of chart curves - titles will now equal the Facet's description.
|
Mon, 17 Oct 2011 08:45:26 +0000 |
Felix Wolfsteller |
Fix flys/issue363 (W-INFO/ Abflusskurve, Extremwert-Rendering).
|
Fri, 14 Oct 2011 11:13:04 +0000 |
Ingo Weinzierl |
Improved the mapfile templates to create nicer GetLegendGraphic images.
|
Fri, 14 Oct 2011 08:52:44 +0000 |
Felix Wolfsteller |
Allow simple codepaths to have Facets initially being 'inactive' (wrt rendering).
|
Thu, 13 Oct 2011 12:42:31 +0000 |
Felix Wolfsteller |
Removed obsolete imports.
|
Wed, 12 Oct 2011 16:52:43 +0000 |
Ingo Weinzierl |
Added a further attribute to the feature type description for barriers.
|
Wed, 12 Oct 2011 12:10:50 +0000 |
Felix Wolfsteller |
Added i18n for state.winfo,waterlevel_pair_select .
|
Wed, 12 Oct 2011 11:01:41 +0000 |
Felix Wolfsteller |
Addressed 'wrong label' issue of wdiff csv-export.
|
Wed, 12 Oct 2011 10:59:12 +0000 |
Felix Wolfsteller |
Cosmetics, docs.
|
Wed, 12 Oct 2011 10:21:59 +0000 |
Felix Wolfsteller |
Fix remainder of flys/issue304 (Erweiterte Funktionen W-Differenzen).
|
Tue, 11 Oct 2011 11:54:14 +0000 |
Felix Wolfsteller |
Added wdiff-chart translations.
|
Tue, 11 Oct 2011 11:16:40 +0000 |
Felix Wolfsteller |
Expose translateable Strings as constants.
|
Tue, 11 Oct 2011 10:44:12 +0000 |
Felix Wolfsteller |
Fix most labels in w-diff diagrams; refactoring to allow easier adoption of
|
Tue, 11 Oct 2011 10:38:54 +0000 |
Ingo Weinzierl |
Bugfix: #383 Add further y-axes before adjusting the ranges for each y-axis.
|
Mon, 10 Oct 2011 14:22:53 +0000 |
Sascha L. Teichmann |
XYChartGenerator: s/new Integer(small)/Integer.valueOf(small)/
|
Mon, 10 Oct 2011 14:00:18 +0000 |
Sascha L. Teichmann |
JFreeChart: Do not fire change events for each and every data point added.
|
Mon, 10 Oct 2011 11:40:17 +0000 |
Felix Wolfsteller |
Fixed incorrect indexing of facets when doing multiple (w)differences.
|
Mon, 10 Oct 2011 10:27:45 +0000 |
Felix Wolfsteller |
In WDifferenceCurveGenerator use slightly modified doWOut-implementation of LongitudinalSectionGenerator.
|
Mon, 10 Oct 2011 10:12:51 +0000 |
Felix Wolfsteller |
Fix import from last commit.
|
Mon, 10 Oct 2011 09:53:18 +0000 |
Felix Wolfsteller |
Let WaterlevelPairSelect send "old" data.
|
Mon, 10 Oct 2011 08:35:30 +0000 |
Ingo Weinzierl |
Bugfixes: #150 #345 Corrected the determination to invert the x axis in longitudinal section charts.
|
Mon, 10 Oct 2011 07:47:30 +0000 |
Felix Wolfsteller |
Cosmetics, docs, annotations.
|
Mon, 10 Oct 2011 07:31:23 +0000 |
Ingo Weinzierl |
Bugfix: #220 Made y-axes of longitudinal and crosssection charts look equal.
|
Mon, 10 Oct 2011 07:07:17 +0000 |
Ingo Weinzierl |
Bugfix: #189 Changed the order of a duration curve CSV export.
|
Fri, 07 Oct 2011 15:55:38 +0000 |
Sascha L. Teichmann |
Worked on flys/issue150
|
Fri, 07 Oct 2011 13:33:10 +0000 |
Ingo Weinzierl |
Take care on empty ranges (null) while preparing single point ranges.
|
Fri, 07 Oct 2011 13:15:48 +0000 |
Ingo Weinzierl |
Bugfix: #114 Enabled rendering charts with a single data point.
|
Fri, 07 Oct 2011 13:14:37 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Fri, 07 Oct 2011 10:51:09 +0000 |
Ingo Weinzierl |
Bugfix: #353 Enabled chart's to be drawn with proper axes set even if no data is contained.
|
Fri, 07 Oct 2011 09:40:15 +0000 |
Ingo Weinzierl |
Changed max number of digits for AT exports.
|
Thu, 06 Oct 2011 14:36:05 +0000 |
Sascha L. Teichmann |
ATWriter: Get rid of buggy first line code.
|
Wed, 05 Oct 2011 16:58:38 +0000 |
Sascha L. Teichmann |
fixed flys/issue201
|
Wed, 05 Oct 2011 15:04:00 +0000 |
Sascha L. Teichmann |
fixed flys/issue177
|
Wed, 05 Oct 2011 14:23:53 +0000 |
Ingo Weinzierl |
Improved the creation/rendering of annotations (km favorites, mainvalues).
|
Wed, 05 Oct 2011 13:16:44 +0000 |
Sascha L. Teichmann |
Removed code duplication of guessWaterIncreasing()
|
Wed, 05 Oct 2011 11:23:18 +0000 |
Ingo Weinzierl |
Bugfixes for various issues: Improved rendering process of annotations.
|
Wed, 05 Oct 2011 10:36:40 +0000 |
Sascha L. Teichmann |
Backjump correction: Finally looks fine.
|
Wed, 05 Oct 2011 10:26:54 +0000 |
Ingo Weinzierl |
AnnotationArtifact: Bugfixes and enabled cache support.
|
Tue, 04 Oct 2011 16:36:19 +0000 |
Sascha L. Teichmann |
flys/issue31: Simplified the back jump correction code a lot.
|
Tue, 04 Oct 2011 15:30:09 +0000 |
Ingo Weinzierl |
Modified code to determine the elevation model of Wsts in the LongitudinalSectionGenerator.
|
Tue, 04 Oct 2011 15:29:39 +0000 |
Sascha L. Teichmann |
Moved some generic double array code from BackjumpCorrector to DoubleUtil
|
Tue, 04 Oct 2011 15:23:31 +0000 |
Sascha L. Teichmann |
Added code to interpolate double values in a sorted array
|
Tue, 04 Oct 2011 15:14:09 +0000 |
Sascha L. Teichmann |
Removed superfluous imports.
|
Tue, 04 Oct 2011 13:38:21 +0000 |
Ingo Weinzierl |
Bugfix: #330 Add problem if no data was found for duration curves.
|
Tue, 04 Oct 2011 11:28:37 +0000 |
Ingo Weinzierl |
Added facet and index information to theme which are stored at CollectionItems.
|
Tue, 04 Oct 2011 07:37:05 +0000 |
Ingo Weinzierl |
Bugfix: #346 Modified x and y axis titles of longitudinal section charts.
|
Fri, 30 Sep 2011 14:29:26 +0000 |
Ingo Weinzierl |
Bugfix: #351 Modified determination of single values specified by min/max values and an interval.
|
Fri, 30 Sep 2011 09:41:22 +0000 |
Felix Wolfsteller |
Fix flys/issue334 (CrossSection output shown even without calculation result).
|
Fri, 30 Sep 2011 08:02:21 +0000 |
Ingo Weinzierl |
Bugfix: #176 and #349 Create proper titles for W and Q waterlevel facets.
|
Fri, 30 Sep 2011 05:31:34 +0000 |
Felix Wolfsteller |
Show proper labels for selected differences.
|
Thu, 29 Sep 2011 18:19:45 +0000 |
Sascha L. Teichmann |
Fixed issues flys/issue244, flys/issue332
|
Wed, 28 Sep 2011 15:47:57 +0000 |
Felix Wolfsteller |
Use StringUtil.wWrap , fix wrong loop, minor refac and cosmetics.
|
Wed, 28 Sep 2011 15:37:59 +0000 |
Felix Wolfsteller |
Extracted/use StringUtil.wWrap .
|
Wed, 28 Sep 2011 15:17:44 +0000 |
Ingo Weinzierl |
Write gauge determined in MainValuesService to log.
|
Wed, 28 Sep 2011 15:02:33 +0000 |
Ingo Weinzierl |
Bugfix: #332 Made AT-exports compatible with desktop FLYS.
|
Wed, 28 Sep 2011 14:01:00 +0000 |
Ingo Weinzierl |
Bugfix: #328 Improved datacage configuration and labels for selected waterlevels.
|
Wed, 28 Sep 2011 09:17:20 +0000 |
Ingo Weinzierl |
Made feed() operation able to remove existing data items from Artifact's data pool.
|
Wed, 28 Sep 2011 08:20:29 +0000 |
Felix Wolfsteller |
Extracted StringUtil.unbracket from WaterlevelSelectState.strip .
|
Tue, 27 Sep 2011 15:19:59 +0000 |
Ingo Weinzierl |
Little modifications for making recommendations - will now work for states with background calculation.
|
Tue, 27 Sep 2011 14:37:18 +0000 |
Felix Wolfsteller |
Enable auto-scaling axis for waterlevels in WDifference-plots.
|
Tue, 27 Sep 2011 14:03:06 +0000 |
Felix Wolfsteller |
In W-Difference-calculation, respect indices of selected facets.
|
Tue, 27 Sep 2011 13:45:13 +0000 |
Sascha L. Teichmann |
flys/issue317: Removed dependency from cross section demo app.
|
Tue, 27 Sep 2011 12:40:42 +0000 |
Ingo Weinzierl |
Improved Facet creation for floodmaps - WSPLGEN and barriers Facets are only created if the calculation was successful.
|
Tue, 27 Sep 2011 11:33:45 +0000 |
Ingo Weinzierl |
Improved WSPLGEN start to suppress inconsistent Artifact states.
|
Tue, 27 Sep 2011 10:53:41 +0000 |
Ingo Weinzierl |
Improved regex used to track WSPLGEN errors - will now match critical errors as well.
|
Tue, 27 Sep 2011 10:18:06 +0000 |
Sascha L. Teichmann |
Fixed whitespace usage in ChangeLog.
|
Tue, 27 Sep 2011 10:15:27 +0000 |
Sascha L. Teichmann |
Removed superfluous imports
|
Tue, 27 Sep 2011 10:06:19 +0000 |
Ingo Weinzierl |
Bugfix: #68 Set number format of chart plot axes based on the CallMeta instance for each request.
|
Tue, 27 Sep 2011 10:00:29 +0000 |
Sascha L. Teichmann |
Cache: Increased number of cached annotations.
|
Tue, 27 Sep 2011 09:35:18 +0000 |
Felix Wolfsteller |
Let WDifferences-diagram show more than one difference, if asked to.
|
Tue, 27 Sep 2011 07:41:21 +0000 |
Ingo Weinzierl |
Bugfix: #320 Substitue '../' in shapefile directories.
|
Mon, 26 Sep 2011 15:35:46 +0000 |
Ingo Weinzierl |
The extent of the WSPLGEN facets are now determined by the extent of the start and end CrossSectionTrack of the WSPLGEN calculation.
|
Mon, 26 Sep 2011 13:37:30 +0000 |
Felix Wolfsteller |
Improved w-differences diagram generation with included 'absolute' values.
|
Mon, 26 Sep 2011 13:17:55 +0000 |
Felix Wolfsteller |
Add positional-conflict-awareness when merging Facets in attribute
|
Mon, 26 Sep 2011 13:10:40 +0000 |
Ingo Weinzierl |
Bugfix: #296 Set i18n titles for WSPLGEN and barriers WMS layers.
|
Mon, 26 Sep 2011 13:10:17 +0000 |
Felix Wolfsteller |
Fix getPosition() in ManagedDomFacet.
|
Fri, 23 Sep 2011 11:58:08 +0000 |
Felix Wolfsteller |
Squash a bug about wrongly named position attribute ('pos' vs 'art:pos').
|
Fri, 23 Sep 2011 07:19:41 +0000 |
Felix Wolfsteller |
Minor refactoring, documentation.
|
Fri, 23 Sep 2011 04:21:16 +0000 |
Felix Wolfsteller |
Added documentation.
|
Thu, 22 Sep 2011 16:16:55 +0000 |
Ingo Weinzierl |
Made MetaDataService a subclass of FLYSService.
|
Thu, 22 Sep 2011 12:49:18 +0000 |
Bjoern Schilberg |
Full blown mosel wms mapfile.
|
Thu, 22 Sep 2011 10:07:22 +0000 |
Ingo Weinzierl |
Improved database session handling in services and artifacts.
|
Thu, 22 Sep 2011 07:58:24 +0000 |
Ingo Weinzierl |
Improved bounds validation for distance only states.
|
Wed, 21 Sep 2011 14:28:39 +0000 |
Felix Wolfsteller |
Added WaterlevelArtifact and respective infrastructure.
|
Wed, 21 Sep 2011 14:01:14 +0000 |
Felix Wolfsteller |
Cosmetics, docs.
|
Wed, 21 Sep 2011 13:53:09 +0000 |
Felix Wolfsteller |
Let WDifferencesCurveGenerator process LONGITUDINAL_W facets.
|
Wed, 21 Sep 2011 13:49:50 +0000 |
Felix Wolfsteller |
Preparations for ability to display multiple differences in one plot.
|
Wed, 21 Sep 2011 13:03:54 +0000 |
Ingo Weinzierl |
#315 Added new state for entering a kilometer range without step width.
|
Wed, 21 Sep 2011 13:01:25 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Wed, 21 Sep 2011 12:55:36 +0000 |
Felix Wolfsteller |
Guard access to dataset to avoid NullPointerException.
|
Wed, 21 Sep 2011 10:08:47 +0000 |
Ingo Weinzierl |
#325 Create human readable label for the selected DEM (used in the static UI part).
|
Mon, 19 Sep 2011 18:46:44 +0000 |
Ingo Weinzierl |
Tagged RELEASE 2.5 of flys-artifacts.
|
Mon, 19 Sep 2011 14:36:51 +0000 |
Bjoern Schilberg |
Adjust wms saar styling in the flys karten-archive styling.
|
Mon, 19 Sep 2011 12:44:51 +0000 |
Ingo Weinzierl |
Cleanup imports.
|
Fri, 16 Sep 2011 14:57:14 +0000 |
Ingo Weinzierl |
Use DGM Id in FLYSArtifact's data pool to query DGMs for floodmaps instead of querying DGMs by given range values.
|
Fri, 16 Sep 2011 13:26:08 +0000 |
Ingo Weinzierl |
Added a DEM section to the floodmap section in the datacage configuration.
|
Fri, 16 Sep 2011 11:37:43 +0000 |
Felix Wolfsteller |
Fix build.
|
Fri, 16 Sep 2011 11:30:50 +0000 |
Felix Wolfsteller |
Load given artifacts for w-diff calculation.
|
Fri, 16 Sep 2011 10:49:04 +0000 |
Bjoern Schilberg |
Added inital mapserver configuration files.
|
Fri, 16 Sep 2011 09:51:02 +0000 |
Ingo Weinzierl |
Repaired datacage configuration. The system specific stuff is also displayed if a user-id is given.
|
Fri, 16 Sep 2011 08:47:09 +0000 |
Ingo Weinzierl |
Write the name of the selected waterlevels (used for the floodmap) into the static DESCRIBE.
|
Fri, 16 Sep 2011 06:52:16 +0000 |
Ingo Weinzierl |
Added state label for waterlevel selection.
|
Thu, 15 Sep 2011 15:36:05 +0000 |
Ingo Weinzierl |
Enabled the FloodMapState to fetch waterlevel data from external Artifact.
|
Thu, 15 Sep 2011 15:10:04 +0000 |
Ingo Weinzierl |
Removed needness import from JSON library which is not part of FLYS yet.
|
Thu, 15 Sep 2011 15:05:24 +0000 |
Ingo Weinzierl |
Introduced the possibility for States to transform/modify input before the data is added to FLYSArtifact.
|
Thu, 15 Sep 2011 15:00:23 +0000 |
Ingo Weinzierl |
Prepared FLYSArtifactCollection to live without Artifacts.
|
Thu, 15 Sep 2011 14:58:36 +0000 |
Ingo Weinzierl |
Improved FLYSUtils: fetch Artifacts from ArtifactDatabase properly.
|
Thu, 15 Sep 2011 07:39:36 +0000 |
Felix Wolfsteller |
Extended WDifferences bracnh of WINFO to have calculation in dedicated,
|
Wed, 14 Sep 2011 14:58:06 +0000 |
Ingo Weinzierl |
Prepared the winfo artifact for floodmap calculations (now selectable in the UI).
|
Wed, 14 Sep 2011 10:04:19 +0000 |
Ingo Weinzierl |
Bugfix: merge facets for the Collection's attribute only if the new and old facet's name and owner artifact are equal.
|
Wed, 14 Sep 2011 09:36:28 +0000 |
Felix Wolfsteller |
Partial fix flys/issue304 (3:Display ZeroBaseline).
|
Wed, 14 Sep 2011 07:46:40 +0000 |
Felix Wolfsteller |
Fix flys/issue310 (crosssection theme).
|
Tue, 13 Sep 2011 07:47:56 +0000 |
Ingo Weinzierl |
Add an error message to the calculation report if an error occured while WSPLGENJob creation.
|
Tue, 13 Sep 2011 06:30:10 +0000 |
Felix Wolfsteller |
Fix crash when StickyAxisAnnotation should be drawn without proper axis
|
Tue, 13 Sep 2011 05:25:09 +0000 |
Ingo Weinzierl |
Improved styling (mapserver style) of WSPLGEN result shape.
|
Mon, 12 Sep 2011 13:03:27 +0000 |
Ingo Weinzierl |
Add status message for queued WSPLGEN jobs to notify users.
|
Mon, 12 Sep 2011 11:40:04 +0000 |
Ingo Weinzierl |
Do only create WSPLGEN and barrier facets if the WSPLGEN job has been added to the Scheduler and if there are digitized geometries existing.
|
Mon, 12 Sep 2011 11:30:19 +0000 |
Felix Wolfsteller |
Fix build, added new DataUtil.
|
Mon, 12 Sep 2011 11:26:32 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Mon, 12 Sep 2011 09:06:05 +0000 |
Felix Wolfsteller |
Added CSV Exporter for WDifferences.
|
Mon, 12 Sep 2011 09:00:08 +0000 |
Felix Wolfsteller |
Cosmetics
|
Mon, 12 Sep 2011 06:23:48 +0000 |
Ingo Weinzierl |
Suppress the GeoJSON string for the FloodMap creation to be included in the static DESCRIBE part.
|
Mon, 12 Sep 2011 04:20:48 +0000 |
Ingo Weinzierl |
Removed needless imports.
|
Fri, 09 Sep 2011 15:03:00 +0000 |
Ingo Weinzierl |
Write status messages and progress information of WSPLGEN Calculations into Artifact's DESCRIBE document.
|
Fri, 09 Sep 2011 13:26:28 +0000 |
Felix Wolfsteller |
Fix flys/issue280 (boundingboxes of annotation).
|
Fri, 09 Sep 2011 13:02:23 +0000 |
Felix Wolfsteller |
Fix flys/issue279 .
|
Fri, 09 Sep 2011 12:37:52 +0000 |
Felix Wolfsteller |
Fix ArrayIndexOutOfBounds in certain cases.
|
Fri, 09 Sep 2011 12:29:28 +0000 |
Felix Wolfsteller |
Fix facet name and legend of w-differences, walk over distance state, too.
|
Fri, 09 Sep 2011 10:13:22 +0000 |
Felix Wolfsteller |
Added configuration to kick-in w-differences branch of winfo.
|
Fri, 09 Sep 2011 10:07:14 +0000 |
Felix Wolfsteller |
Added very stubby WDifferences State/OutGenerator for WINFOArtifact.
|
Fri, 09 Sep 2011 10:01:09 +0000 |
Felix Wolfsteller |
Implement getArtifact(uuid,context) in FLYSUtils.
|
Thu, 08 Sep 2011 14:42:36 +0000 |
Ingo Weinzierl |
Added an Output target for WSPLGEN reports that will be available when an WSPLGEN calculation is finished.
|
Thu, 08 Sep 2011 11:29:04 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Thu, 08 Sep 2011 11:24:27 +0000 |
Ingo Weinzierl |
Added a 'ProblemObserver' that analyses WSPLGEN's error stream for errors and warnings.
|
Thu, 08 Sep 2011 11:22:35 +0000 |
Felix Wolfsteller |
Added translation of w_differences.
|
Wed, 07 Sep 2011 13:56:10 +0000 |
Ingo Weinzierl |
Append an attribute 'background-processing' (can be 'true' or 'false') to the WINFOArtifact's DESCRIBE document.
|
Wed, 07 Sep 2011 13:54:18 +0000 |
Ingo Weinzierl |
Set the river extent for WMSLayers in the FloodMapState.
|
Wed, 07 Sep 2011 11:50:10 +0000 |
Felix Wolfsteller |
Added Themes for CrossSection diagrams.
|
Wed, 07 Sep 2011 10:51:54 +0000 |
Felix Wolfsteller |
Display real km of shown data in crosssection-diagram.
|
Wed, 07 Sep 2011 10:37:14 +0000 |
Felix Wolfsteller |
Fix various issues like i18n in cross section diagrams.
|
Wed, 07 Sep 2011 09:24:32 +0000 |
Felix Wolfsteller |
Fix waterline in crosssection diagram.
|
Wed, 07 Sep 2011 07:48:03 +0000 |
Felix Wolfsteller |
Fix profile loading of cross section diagram.
|
Wed, 07 Sep 2011 07:37:22 +0000 |
Felix Wolfsteller |
Minor cosmetics
|
Wed, 07 Sep 2011 07:28:52 +0000 |
Felix Wolfsteller |
Cosmetics, docs.
|
Tue, 06 Sep 2011 17:41:07 +0000 |
Ingo Weinzierl |
Added a fallback mechanism to style mapserver layers as long as the theme mechanism is not implemented for maps (as it is for charts).
|
Tue, 06 Sep 2011 15:25:54 +0000 |
Ingo Weinzierl |
Read barrier layers from filesystem while mapfile creation and build a facet for this layer in the artifact.
|
Tue, 06 Sep 2011 11:10:13 +0000 |
Raimund Renkert |
Added driver to database configuration for use with postgresql.
|
Tue, 06 Sep 2011 10:34:49 +0000 |
Ingo Weinzierl |
Little mapfile template improvement.
|
Mon, 05 Sep 2011 16:08:19 +0000 |
Ingo Weinzierl |
Create WMSLayerFacets for the WSPLGEN results after we have started a WSPLGEN job.
|
Mon, 05 Sep 2011 15:29:11 +0000 |
Ingo Weinzierl |
Trigger the mapfile creation after WSPLGEN jobs have finished.
|
Mon, 05 Sep 2011 14:04:03 +0000 |
Ingo Weinzierl |
Introduced a MapfileGenerator that creates Mapserver specific mapfiles based on WSPLGEN results read from filesystem.
|
Mon, 05 Sep 2011 07:17:52 +0000 |
Ingo Weinzierl |
Some bugfixes when starting/finishing WSPLGEN jobs.
|
Fri, 02 Sep 2011 13:12:05 +0000 |
Ingo Weinzierl |
Added infrastructure to start WSPLGEN calculations - the FloodMapState already start such calculations.
|
Fri, 02 Sep 2011 12:57:08 +0000 |
Felix Wolfsteller |
Add CrossSectionInfoGenerator.
|
Thu, 01 Sep 2011 13:00:36 +0000 |
Felix Wolfsteller |
Cleanups of CrossSection*.
|
Thu, 01 Sep 2011 12:47:01 +0000 |
Ingo Weinzierl |
Set the 'typ' attribute of lines and polygons in barrier shapefiles while shapefile creation.
|
Thu, 01 Sep 2011 12:23:23 +0000 |
Ingo Weinzierl |
Set the Z values of line and polygon barrier geometries used for WSPLGEN.
|
Thu, 01 Sep 2011 12:15:46 +0000 |
Felix Wolfsteller |
Get real (but yet not parameterized) data to display in CrossSection.
|
Thu, 01 Sep 2011 07:27:44 +0000 |
Ingo Weinzierl |
Close open shapefile transactions properly.
|
Thu, 01 Sep 2011 07:06:14 +0000 |
Ingo Weinzierl |
Renamed WSPLGEN required waterlevels file to 'waterlevel.wst'.
|
Thu, 01 Sep 2011 07:04:01 +0000 |
Ingo Weinzierl |
Write additional attributes ELEVATION and KILOMETER into crosssection track shapefiles.
|
Wed, 31 Aug 2011 13:19:29 +0000 |
Ingo Weinzierl |
Write WSP file for WSPLGEN and add its filepath to the WSPLGEN job.
|
Wed, 31 Aug 2011 12:44:07 +0000 |
Ingo Weinzierl |
Reordered some parameters in a FLYSArtifact method.
|
Wed, 31 Aug 2011 12:23:05 +0000 |
Felix Wolfsteller |
Improved stub for CrossSections (including Factory and Facet).
|
Wed, 31 Aug 2011 12:20:23 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Wed, 31 Aug 2011 10:43:21 +0000 |
Felix Wolfsteller |
Removed stray character.
|
Wed, 31 Aug 2011 10:41:16 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Wed, 31 Aug 2011 10:34:45 +0000 |
Felix Wolfsteller |
Fix translations of Main Values Facets.
|
Wed, 31 Aug 2011 10:24:49 +0000 |
Felix Wolfsteller |
Added dummy sceleton for Cross Sections.
|
Wed, 31 Aug 2011 08:53:30 +0000 |
Ingo Weinzierl |
Export floodplain to shapefile and add its file path to WSPLGEN job.
|
Wed, 31 Aug 2011 07:50:01 +0000 |
Ingo Weinzierl |
Write file path of DMGs into the WSPLGEN job while preparing WSPLGEN.
|
Tue, 30 Aug 2011 15:17:43 +0000 |
Ingo Weinzierl |
Export riveraxis and crosssections to shapefiles for WSPLGEN.
|
Tue, 30 Aug 2011 14:13:06 +0000 |
Ingo Weinzierl |
Use the correct SRID while reading GeoJSON barriers and writing line/polygon shapefiles.
|
Tue, 30 Aug 2011 11:09:54 +0000 |
Ingo Weinzierl |
Write user defined barriers into a shapefile that is placed in the Artifact's directory.
|
Tue, 30 Aug 2011 08:09:52 +0000 |
Ingo Weinzierl |
Moved code to extract the river srid defined in the global configuration into FLYSUtils.
|
Mon, 29 Aug 2011 09:26:56 +0000 |
Felix Wolfsteller |
Use FLYSUtils.getRiver instead of WINFOArtifact.getRiver.
|
Mon, 29 Aug 2011 09:26:07 +0000 |
Felix Wolfsteller |
Use FLYSUtils.getRiver instead of WINFOArtifact.getRiver.
|
Mon, 29 Aug 2011 09:11:15 +0000 |
Felix Wolfsteller |
Commit accidentally omitted result of refactoring (WINFO/FLYSUtils/getRiver).
|
Mon, 29 Aug 2011 09:07:55 +0000 |
Felix Wolfsteller |
Interpolate Q main values, generate interpolated W main values on the fly from
|
Mon, 29 Aug 2011 09:04:48 +0000 |
Felix Wolfsteller |
Use new helper class FLYSUtils, minor refactorization.
|
Mon, 29 Aug 2011 09:01:40 +0000 |
Felix Wolfsteller |
Refactored to use new FLYSUtils, moved getRiver-functionality inside.
|
Mon, 29 Aug 2011 08:58:03 +0000 |
Felix Wolfsteller |
Minor cosmetics.
|
Fri, 26 Aug 2011 15:32:58 +0000 |
Sascha L. Teichmann |
Made it Oracle compatible
|
Fri, 26 Aug 2011 15:01:20 +0000 |
Ingo Weinzierl |
Set some WSPLGENJob parameters which are stored in FLYSArtifact in the Floodmap state.
|
Fri, 26 Aug 2011 14:58:35 +0000 |
Ingo Weinzierl |
Refactored the code to fetch the km range/locations into a utility class.
|
Fri, 26 Aug 2011 14:55:18 +0000 |
Ingo Weinzierl |
Added a new method to FLYSArtifact to destroy a single state (call its endOfLife).
|
Fri, 26 Aug 2011 12:45:32 +0000 |
Felix Wolfsteller |
Cosmetics.
|
Fri, 26 Aug 2011 12:44:12 +0000 |
Felix Wolfsteller |
Added limited themeing-support for MainValues.
|
Fri, 26 Aug 2011 12:42:12 +0000 |
Ingo Weinzierl |
Prepare directories for WSPLGEN specific data in FloodMap state and remove those directories when State.endOfLife() is called.
|
Fri, 26 Aug 2011 12:40:11 +0000 |
Felix Wolfsteller |
New theme-related utilities.
|