| Thu, 25 Sep 2014 17:24:35 +0200 |
Raimund Renkert |
Use the sq relation artifact to load data from datacage.
|
| Tue, 23 Sep 2014 12:56:23 +0200 |
Tom Gottfried |
Q-symmetry: SQ-relations should not be filtered for specific outs (and optimised statement a bit).
|
| Tue, 23 Sep 2014 10:11:52 +0200 |
Tom Gottfried |
Put all macros for wst-data in one place and reduce code duplications.
|
| Mon, 22 Sep 2014 18:17:47 +0200 |
Tom Gottfried |
Remove duplications from discharge prototypes and put it all together.
|
| Fri, 19 Sep 2014 16:29:11 +0200 |
Tom Gottfried |
Classify and sort iteration over user-data non-recommendations.
|
| Fri, 19 Sep 2014 16:07:59 +0200 |
Tom Gottfried |
Classify and sort iteration over non-recommendations.
|
| Fri, 19 Sep 2014 15:45:54 +0200 |
Tom Gottfried |
Classify and sort iteration over recommendations.
|
| Fri, 19 Sep 2014 15:31:03 +0200 |
Tom Gottfried |
Purge clash of out-names, resulting hacks and tests for not existing outs and give some more meaningful names.
|
| Fri, 19 Sep 2014 09:49:09 +0200 |
Tom Gottfried |
Official sedimentload epochs should be seperated from other data in datacage.
|
| Wed, 17 Sep 2014 13:24:13 +0200 |
Tom Gottfried |
Consider new SQ-diagrams in datacage config.
|
| Tue, 16 Sep 2014 16:10:30 +0200 |
Tom Gottfried |
Update comment on conditional loading of user content.
|
| Mon, 15 Sep 2014 11:58:31 +0200 |
Tom Gottfried |
Call orphaned macro originating from 'fix_wq_curve' in prototype.
|
| Mon, 15 Sep 2014 11:26:48 +0200 |
Tom Gottfried |
Make use of publicly available external WMS (Pegelonline) otherwise called from BfG-specific macro.
|
| Fri, 12 Sep 2014 19:09:24 +0200 |
Tom Gottfried |
Remove call of BfG-specific macro.
|
| Fri, 12 Sep 2014 13:12:25 +0200 |
Sascha L. Teichmann |
Added discharge curve prototye.
|
| Tue, 09 Sep 2014 10:53:50 +0200 |
Tom Gottfried |
Suggestion: Load official epochs via recommendations instead of a pseudo-calculation.
|
| Mon, 08 Sep 2014 15:54:12 +0200 |
Tom Gottfried |
Let official epochs be showy and remove detritus of 'yields' in datacage config.
|
| Mon, 08 Sep 2014 10:03:00 +0200 |
Tom Gottfried |
Allow fractions without SQ-time interval (suspended sediment) to be loaded.
|
| Tue, 02 Sep 2014 14:46:20 +0200 |
Tom Gottfried |
Make sedimentload loadable as old calculation.
|
| Mon, 01 Sep 2014 09:43:55 +0200 |
Tom Gottfried |
Handle missing years in bed height differences without assuming an unknown year to be BC 1.
|
| Thu, 28 Aug 2014 12:00:52 +0200 |
Tom Gottfried |
Quoting is done elsewhere since rev 7021753b3797.
|
| Tue, 26 Aug 2014 17:16:21 +0200 |
Tom Gottfried |
With the exception of real calculation results, descriptions of sediment loads can all follow the same pattern.
|
| Tue, 26 Aug 2014 12:09:18 +0200 |
Tom Gottfried |
Metadata in datacage tooltips for sediment densities, bed heights, flow velocities and sounding widhts.
|
| Fri, 22 Aug 2014 18:00:35 +0200 |
Tom Gottfried |
Tooltip for sediment loads in datacage.
|
| Fri, 22 Aug 2014 17:43:36 +0200 |
Tom Gottfried |
Add SQ time interval to selection tree in datacage for sediment loads.
|
| Fri, 22 Aug 2014 13:19:02 +0200 |
Tom Gottfried |
Remove code duplications in sedimentload datacage.
|
| Fri, 22 Aug 2014 08:04:43 +0200 |
Tom Gottfried |
Format timestamps in datacage tooltip for porosities.
|
| Wed, 20 Aug 2014 17:47:58 +0200 |
Tom Gottfried |
Reconstruct facet description of sediment load longitudinal sections. i18n will follow.
|
| Wed, 20 Aug 2014 17:07:17 +0200 |
Tom Gottfried |
Reconstruct facet description of sediment load at measurement stations. i18n will follow.
|
| Wed, 20 Aug 2014 12:12:18 +0200 |
Andre Heinecke |
Remove todos about sedimentload_ls facet
|
| Wed, 20 Aug 2014 12:10:32 +0200 |
Andre Heinecke |
Configure SedimentLoadLSFacet
|
| Tue, 19 Aug 2014 18:46:13 +0200 |
Tom Gottfried |
Distinction by measurement station gives lots of duplicates, as we always get a whole longitudinal section.
|
| Fri, 15 Aug 2014 18:24:55 +0200 |
Andre Heinecke |
Change sedimentload factory from yields to loads.
|
| Fri, 08 Aug 2014 13:24:11 +0200 |
Tom Gottfried |
Datacage config for new sediment load structures. Missing: some facets and everything down from the innermost macros for sediment load at measurement stations.
|
| Wed, 06 Aug 2014 19:17:12 +0200 |
Tom Gottfried |
SCHEMA CHANGE: rename database tables from yield to load_ls according to respective classes.
|
| Tue, 08 Jul 2014 18:19:04 +0200 |
Tom Gottfried |
merged default into branch facet-metadata.
facet-metadata
|
| Thu, 03 Jul 2014 16:36:43 +0200 |
Tom Gottfried |
Allow differences between years and epochs (accidentally did that in branch facet-metadata already too)
|
| Thu, 03 Jul 2014 16:34:28 +0200 |
Tom Gottfried |
Allow differences between years and epochs.
facet-metadata
|
| Thu, 03 Jul 2014 12:30:41 +0200 |
Raimund Renkert |
Added macro for middle bedheights for old calculations.
facet-metadata
|
| Fri, 27 Jun 2014 18:47:55 +0200 |
Tom Gottfried |
Exclude annotation types without trailing unit (assumed after whitespace).
|
| Fri, 27 Jun 2014 15:52:05 +0200 |
Tom Gottfried |
Minor cleanup in meta-data.xml.
|
| Fri, 27 Jun 2014 15:10:10 +0200 |
Raimund Renkert |
Select complete differences matrix to have a well sorted dc-tree.
|
| Fri, 27 Jun 2014 09:50:46 +0200 |
Raimund Renkert |
Fixed datacage info field for bed height differences.
|
| Thu, 26 Jun 2014 14:54:04 +0200 |
Raimund Renkert |
Updated macros and db statement for minfo bedheight differences.
|
| Fri, 20 Jun 2014 16:52:14 +0200 |
Sascha L. Teichmann |
DC: Flatten bed height diff tree a bit.
|
| Fri, 20 Jun 2014 16:41:30 +0200 |
Sascha L. Teichmann |
DC: Group bedheight diffs by both years.
|
| Fri, 20 Jun 2014 16:33:09 +0200 |
Raimund Renkert |
New macros for bed height differneces.
|
| Wed, 18 Jun 2014 15:30:39 +0200 |
Sascha L. Teichmann |
Datacage: Moved year filtering of bed heights to separate macro to be reusable in other contextes.
|
| Tue, 10 Jun 2014 12:51:08 +0200 |
Raimund Renkert |
Removed bed differences epoch from datacage.
|
| Fri, 06 Jun 2014 17:02:03 +0200 |
Raimund Renkert |
Removed datacage macro calls for bed height epochs.
|
| Wed, 04 Jun 2014 12:22:01 +0200 |
Tom Gottfried |
Allow differentiating between units of sediment sources/sinks in annotation types also in datacage.
|
| Fri, 30 May 2014 15:46:53 +0200 |
Tom Gottfried |
issue661: prototyped tooltip for porosities in datacage.
|
| Fri, 16 May 2014 13:17:29 +0200 |
Raimund Renkert |
Use description from database for i18n (completed revision dc8910e29dd4).
|
| Wed, 30 Apr 2014 15:29:50 +0200 |
Raimund Renkert |
merged.
|
| Wed, 30 Apr 2014 15:26:44 +0200 |
Raimund Renkert |
New macro for porosities in datacage config.
|
| Thu, 17 Apr 2014 11:42:12 +0200 |
Tom Gottfried |
Merged minfo-opt branch into default.
|
| Thu, 06 Mar 2014 17:30:59 +0100 |
Tom Gottfried |
Remove not publicly available WMS services and enable custom configuration through release script.
|
| Thu, 06 Mar 2014 14:10:00 +0100 |
Raimund Renkert |
Fixed datacage macro for winfo differences and added the new facet.
minfo-opt
|
| Tue, 17 Dec 2013 14:43:26 +0100 |
Andre Heinecke |
(issue1581) Remove Minfo-heights from differencable
|
| Mon, 09 Dec 2013 09:56:01 +0100 |
Felix Wolfsteller |
issue1020: Show official lines in datacage to compute uesks, too.
|
| Fri, 06 Dec 2013 16:47:02 +0100 |
Andre Heinecke |
(issue1474) Change order of measurement stations
|
| Fri, 06 Dec 2013 14:51:48 +0100 |
Tom Gottfried |
Order by years in SQ-relation datacage.
|
| Fri, 06 Dec 2013 14:27:03 +0100 |
Tom Gottfried |
Order by year in sediment yield datacage.
|
| Fri, 06 Dec 2013 13:58:27 +0100 |
Tom Gottfried |
Add sources/sinks to sediment yield datacage.
|
| Fri, 06 Dec 2013 13:17:05 +0100 |
Tom Gottfried |
Add recommendations for bed quality and flow velocity.
|
| Fri, 06 Dec 2013 12:10:24 +0100 |
Felix Wolfsteller |
issue1691: Sedimentload-fetching via datacage now picks right facet.
|
| Mon, 02 Dec 2013 10:08:23 +0100 |
Felix Wolfsteller |
issue1579: Load those official lines automatically.
|
| Mon, 02 Dec 2013 09:48:48 +0100 |
Felix Wolfsteller |
issue1579: Added macro to load interpolated official lines.
|
| Mon, 18 Nov 2013 12:30:36 +0100 |
Felix Wolfsteller |
issue1613: In DC, also show the 'diff' facets, define former calc. for hist. W/Q out.
|
| Mon, 18 Nov 2013 12:22:22 +0100 |
Felix Wolfsteller |
issue1631: Allow loading of some former historical-discharge facets.
|
| Thu, 14 Nov 2013 11:58:51 +0100 |
Felix Wolfsteller |
issue1020: Display more waterlevels for uesk.
|
| Tue, 12 Nov 2013 16:54:18 +0100 |
Sascha L. Teichmann |
Previous fix for flys/issue1675 was broken. :-/
|
| Tue, 12 Nov 2013 15:37:38 +0100 |
Sascha L. Teichmann |
Workaround for flys/issue1675: Guarantee that the years are always between 0 and 9999 in macro 'minfo-heights'.
|
| Wed, 06 Nov 2013 12:07:48 +0100 |
Felix Wolfsteller |
issue1664: Let DC instruct StaticWKmsArtifact to spawn facets
|
| Fri, 01 Nov 2013 15:05:35 +0100 |
Sascha L. Teichmann |
Datacage: Removed macro "delta-wt-ls" from meta-data.xml as it is not used.
3.0.17
|
| Fri, 01 Nov 2013 12:12:24 +0100 |
Felix Wolfsteller |
meta-data.xml: Removed junk.
|
| Fri, 01 Nov 2013 12:11:59 +0100 |
Felix Wolfsteller |
issue1571: Exclude vollmer curves from general longitudinal dc folder.
|
| Fri, 01 Nov 2013 11:13:38 +0100 |
Felix Wolfsteller |
issue1571: Hav eown folder in dc for vollmer curves.
|
| Thu, 31 Oct 2013 11:44:09 +0100 |
Felix Wolfsteller |
issue1657: Adjust DC conf to spawn sounding widths.
|
| Wed, 30 Oct 2013 16:04:06 +0100 |
Felix Wolfsteller |
issue1345: Add flow_velocities folder.
|
| Wed, 30 Oct 2013 15:02:16 +0100 |
Felix Wolfsteller |
issue1512: Fix loading of all former flow vel. calculation via folder.
|
| Wed, 30 Oct 2013 14:53:26 +0100 |
Felix Wolfsteller |
issue1512: Show all flowvelocity facet in former calc. flow vel. part of dc.
|
| Wed, 30 Oct 2013 12:03:07 +0100 |
Felix Wolfsteller |
issue1572: Call longitudinal-section-user-prototype for bedheight-diffs/year.
|
| Tue, 29 Oct 2013 11:32:56 +0100 |
Felix Wolfsteller |
issue1397: Fix reference_curve former calculations in dc.
|
| Tue, 29 Oct 2013 10:42:12 +0100 |
Felix Wolfsteller |
issue1512: Repair loading all of flowvelocitymeasurements by not equipping
|
| Mon, 28 Oct 2013 12:14:46 +0100 |
Felix Wolfsteller |
issue1345: Sort sediment densities by year.
|
| Mon, 28 Oct 2013 11:52:14 +0100 |
Felix Wolfsteller |
meta-data.xml: Simplify query for densities a bit, sort by depth.
|
| Fri, 25 Oct 2013 14:29:38 +0200 |
Felix Wolfsteller |
meta-data.xml: Include bedheight-diffs per year in minfo-user-dc.
|
| Fri, 25 Oct 2013 14:10:29 +0200 |
Felix Wolfsteller |
meta-data.xml: Subsume the different bed-quality dc-nodes.
|
| Fri, 25 Oct 2013 13:52:47 +0200 |
Felix Wolfsteller |
meta-data.xml: Ease i18nability.
|
| Fri, 25 Oct 2013 07:25:19 +0200 |
Felix Wolfsteller |
meta-data.xml: Remove duplicates and 'special' macros fro special outs from
|
| Fri, 25 Oct 2013 07:24:15 +0200 |
Felix Wolfsteller |
meta-data.xml: Remove delta-wt from longitudinal-section-user-prototype .
|
| Wed, 23 Oct 2013 17:45:56 +0200 |
Felix Wolfsteller |
Partly revert rev 7419, conservative guess about which "outs" are handcrafted.
|
| Wed, 23 Oct 2013 17:20:30 +0200 |
Felix Wolfsteller |
issue1345: Re-enable sediment load total loads, now that factory is fixed.
|
| Wed, 23 Oct 2013 17:08:07 +0200 |
Felix Wolfsteller |
issue1345: Showing sediment densitie by depth, comment total load.
|
| Wed, 23 Oct 2013 14:53:47 +0200 |
Tom Gottfried |
Fix typo.
|
| Wed, 23 Oct 2013 12:43:26 +0200 |
Andre Heinecke |
(issue965) Handle the case that diffids are not available
|
| Wed, 23 Oct 2013 12:09:36 +0200 |
Felix Wolfsteller |
meta-data.xml: Be less restrictive in showing facets from waterlevels-discharge.
|
| Wed, 23 Oct 2013 12:08:30 +0200 |
Felix Wolfsteller |
meta-data.xml: Exclude empty.facet s.
|
| Wed, 23 Oct 2013 12:07:35 +0200 |
Felix Wolfsteller |
meta-meta.xml: Also fetch extreme_base curves via dc.
|
| Wed, 23 Oct 2013 12:07:05 +0200 |
Felix Wolfsteller |
meta-data.xml: cosmetics.
|
| Wed, 23 Oct 2013 11:33:31 +0200 |
Felix Wolfsteller |
meta-data.xml: Cosmetics.
|
| Wed, 23 Oct 2013 11:22:47 +0200 |
Felix Wolfsteller |
meta-data.xml: More usage of collection-group-macro.
|
| Wed, 23 Oct 2013 11:28:25 +0200 |
Sascha L. Teichmann |
Datacage: Consequently call macro 'longitudinal-section-user-prototype' in all longitudinal sections of old calculation. Moved asymmeterical stuff to prototype. This may crash!
|
| Wed, 23 Oct 2013 11:04:06 +0200 |
Felix Wolfsteller |
meta-data.xml: Create and use collection-group macro.
|
| Tue, 22 Oct 2013 15:51:33 +0200 |
Felix Wolfsteller |
meta-data.xml: Switch more longitudinal-section like user-dc content to prototype macro.
|
| Tue, 22 Oct 2013 15:43:13 +0200 |
Sascha L. Teichmann |
Datacage: Fixed macro call.
|
| Tue, 22 Oct 2013 15:34:51 +0200 |
Sascha L. Teichmann |
Fixed meta-data.xml
|
| Tue, 22 Oct 2013 12:21:21 +0200 |
Felix Wolfsteller |
issue1512: Sort flow-velocity-models by discharge_zone.value.
|
| Tue, 22 Oct 2013 12:15:33 +0200 |
Felix Wolfsteller |
issue1473: Show differences project name in dc.
|
| Tue, 22 Oct 2013 11:57:17 +0200 |
Felix Wolfsteller |
meta-data.xml: Fix referenced out for discharge_longitudinal_section.
|
| Mon, 21 Oct 2013 19:05:41 +0200 |
Andre Heinecke |
(issue965) Add a comment to explain what we do here
|
| Mon, 21 Oct 2013 18:57:30 +0200 |
Andre Heinecke |
(issue965) Use new datacage magic to have year filtering for bedheights
|
| Mon, 21 Oct 2013 12:21:40 +0200 |
Felix Wolfsteller |
issue1521: Adhere more to dc 'spec', show discharges of flow velocity models.
|
| Thu, 17 Oct 2013 09:40:12 +0200 |
Felix Wolfsteller |
meta-data.xml: cleanup longitudinal-section-user-prototype, removing dupes.
|
| Thu, 17 Oct 2013 07:42:31 +0200 |
Felix Wolfsteller |
issue1473: Let vollmer curves appear under 'former calc/waterlevels from fix.'.
|
| Wed, 16 Oct 2013 18:48:02 +0200 |
Andre Heinecke |
Use more failsave pattern for SQ-facets.
|
| Wed, 16 Oct 2013 15:22:18 +0200 |
Felix Wolfsteller |
Offer total loads in dc.
|
| Wed, 16 Oct 2013 11:45:23 +0200 |
Andre Heinecke |
(issue1474) Add sqrelation user data and disable filtering for it
|
| Wed, 16 Oct 2013 11:42:53 +0200 |
Andre Heinecke |
Add debug output for variables in user context
|
