| Tue, 19 Jun 2018 14:16:45 +0200 |
mschaefer |
Added definitions for the S-Info collision workflow and output
|
| Mon, 11 Jun 2018 09:55:35 +0200 |
mschaefer |
Fixed three queries (channel, infrastructure, collision) by removing the trailing semicolon (produces oracle errors)
|
| Wed, 06 Jun 2018 13:05:57 +0200 |
gernotbelger |
Testing
|
| Mon, 04 Jun 2018 17:31:51 +0200 |
mschaefer |
Added datacage select and chart display for river bed collision counts loaded from database
|
| Mon, 04 Jun 2018 12:50:39 +0200 |
mschaefer |
Conf files for the infrastructure datacage extension
|
| Mon, 04 Jun 2018 08:50:18 +0200 |
mschaefer |
Where clause of the predefined datacage series extended by km range condition
|
| Mon, 04 Jun 2018 08:36:09 +0200 |
mschaefer |
Added datacage select and chart display for river channel sizes loaded from database
|
| Mon, 04 Jun 2018 08:32:25 +0200 |
mschaefer |
Where clause in bed-heights-statement extended by km range condition
|
| Tue, 29 May 2018 11:02:56 +0200 |
gernotbelger |
Umsortierung in Datenkorb bzgl. min/max Sohlhöhen
|
| Fri, 25 May 2018 10:49:23 +0200 |
gernotbelger |
Changed order of SINFO results and fixed data in datacage.
|
| Fri, 25 May 2018 07:59:38 +0200 |
mschaefer |
Epoche filter deactivated for bed-heights-single
|
| Mon, 07 May 2018 07:56:42 +0200 |
mschaefer |
Fixed the queries for the loadable tkh, flow depth and depth evolution data
|
| Mon, 30 Apr 2018 16:00:12 +0200 |
mschaefer |
Added datacage select and chart display for modelled flow depth series loaded from database
|
| Fri, 27 Apr 2018 17:41:59 +0200 |
mschaefer |
Added datacage select and chart display for flow depth evolution series loaded from database, and a correction for the tkh data
|
| Mon, 23 Apr 2018 15:18:48 +0200 |
mschaefer |
Added datacage select and chart display for TKH series loaded from database
|
| Wed, 11 Apr 2018 14:09:13 +0200 |
gernotbelger |
SInfo - FlowDepthMinMax: choosing bed heights, not bed height min and max separately
|
| Fri, 06 Apr 2018 11:55:36 +0200 |
gernotbelger |
Fixed bad expression
|
| Thu, 05 Apr 2018 18:30:34 +0200 |
gernotbelger |
SINFO - show results themes according to spec, either raw data or floating mean values.
|
| Wed, 28 Mar 2018 17:04:20 +0200 |
gernotbelger |
Configured SINFO-zusätzlich selektierte Längsschnitte in datacage
|
| Wed, 28 Mar 2018 14:35:01 +0200 |
gernotbelger |
Implemented datacage for min/max bedheights.
|
| Fri, 23 Mar 2018 17:53:59 +0100 |
gernotbelger |
Configured datacage for SINFO selektierte zus. Längsschnitte and twin-datacage panel for flowd depth calculation
|
| Tue, 20 Mar 2018 13:30:07 +0100 |
gernotbelger |
Work on SINFO-Fließtiefenentwicklung
|
| Thu, 15 Mar 2018 17:22:28 +0100 |
gernotbelger |
Implemented chart output for sinfo flow depth min/max calculation
|
| Wed, 07 Mar 2018 17:36:04 +0100 |
gernotbelger |
SINFO - tkh, configured result facets and themes
|
| Wed, 28 Feb 2018 18:55:39 +0100 |
gernotbelger |
Working on outputmodes of tkh calculation
|
| Thu, 22 Feb 2018 18:44:28 +0100 |
gernotbelger |
Adding SInfo results to datacage
|
| Mon, 19 Feb 2018 18:04:25 +0100 |
gernotbelger |
Activated theme 'streckeninformation
|
| Thu, 18 Jan 2018 18:34:41 +0100 |
gernotbelger |
SINFO - first prototype of BArt Fließtiefen
|
| Fri, 28 Aug 2015 16:24:01 +0200 |
Tom Gottfried |
(issue1839) Consider more than one location in ld_locations.
|
| Thu, 19 Mar 2015 16:50:24 +0100 |
Andre Heinecke |
(issue1051) Fix recommended official epochs for period mode
|
| Thu, 19 Mar 2015 14:03:47 +0100 |
Andre Heinecke |
(issue1755) Fix filtering of BedQuality user facets
|
| Thu, 19 Mar 2015 13:36:38 +0100 |
Andre Heinecke |
(issue1755) Add interpolated facets and update themes accordingly
|
| Wed, 18 Mar 2015 18:42:08 +0100 |
Andre Heinecke |
(issue1755) Generalise BedQuality result handling
|
| Mon, 16 Mar 2015 16:59:37 +0100 |
Tom Gottfried |
Update SQL-statements to schema-changes in rev 6d8d7425a6b5.
|
| Mon, 16 Feb 2015 08:39:06 +0100 |
Tom Gottfried |
bed height differences datacage: only supply differences where subtrahend is older than minuend or year is unknown.
|
| Fri, 13 Feb 2015 16:17:46 +0100 |
Andre Heinecke |
(Issue1754) Make BedDifference calculation range dependent.
|
| Tue, 16 Dec 2014 15:40:00 +0100 |
Andre Heinecke |
(issue1782) Invert KM filter if from is larger then to
|
| Tue, 16 Dec 2014 13:29:38 +0100 |
Tom Gottfried |
Whitespace-cleanup in XML-files.
|
| Fri, 12 Dec 2014 11:11:26 +0100 |
Tom Gottfried |
Do not filter tables without end date in recommendations for historical discharge tables.
|
| Tue, 02 Dec 2014 12:59:52 +0100 |
Tom Gottfried |
Datacage config: Oracle has no boolean data type and thus can not handle such CASE-statement in WHERE-clause.
|
| Thu, 20 Nov 2014 11:27:10 +0100 |
Tom Gottfried |
Datacage: order WSTs according to column numbers in import files.
|
| Thu, 30 Oct 2014 14:20:28 +0100 |
Tom Gottfried |
Load discharge curves via recommendations in historical discharge calculation. ToDo: Remove the other logic to load them.
|
| Wed, 29 Oct 2014 16:02:37 +0100 |
Tom Gottfried |
Recognize the 'no-data value' of fromkm and tokm in datacage statement for discharge curves.
|
| Mon, 20 Oct 2014 14:22:51 +0200 |
Tom Gottfried |
Mention gauge name in theme name for historical discharge curves.
|
| Mon, 20 Oct 2014 12:23:11 +0200 |
Tom Gottfried |
For fixation analysis, allow loading discharge curves from multiple gauges on calculation range via datacage.
|
| Fri, 17 Oct 2014 18:20:33 +0200 |
Tom Gottfried |
Load sounding width via recommendations for bed height differences and cleanup and fix related bed height macros.
|
| Fri, 17 Oct 2014 11:44:01 +0200 |
Tom Gottfried |
Do not filter bed heights by year in datacage for optional data (plus some cleanup).
|
| Thu, 16 Oct 2014 11:15:09 +0200 |
Tom Gottfried |
Reduce code duplication and repair filter for sediment load-recommendations.
|
| Wed, 15 Oct 2014 19:20:26 +0200 |
Tom Gottfried |
SCHEMA CHANGE: removed superfluous columns station and river_id from measurement_stations and adapted other components accordingly.
|
| Tue, 07 Oct 2014 19:04:06 +0200 |
Tom Gottfried |
Removed some code duplication and moved macros to more appropriate places in file.
|
| Fri, 03 Oct 2014 10:26:58 +0200 |
Tom Gottfried |
Q-symmetric datacage configuration for user-data.
|
| Fri, 26 Sep 2014 14:22:37 +0200 |
Tom Gottfried |
The derivative curve is also a discharge diagram.
|
| Fri, 26 Sep 2014 14:18:27 +0200 |
Tom Gottfried |
Throw non-lethal XPathException if not at gauge instead of lethal PSQLException if at gauge.
|
| Fri, 26 Sep 2014 10:53:26 +0200 |
Tom Gottfried |
Q-main values as recommendations in SQ. TODO: solve DDZ.
|
| Thu, 25 Sep 2014 17:24:35 +0200 |
Raimund Renkert |
Use the sq relation artifact to load data from datacage.
|
| Tue, 23 Sep 2014 12:56:23 +0200 |
Tom Gottfried |
Q-symmetry: SQ-relations should not be filtered for specific outs (and optimised statement a bit).
|
| Tue, 23 Sep 2014 10:11:52 +0200 |
Tom Gottfried |
Put all macros for wst-data in one place and reduce code duplications.
|
| Mon, 22 Sep 2014 18:17:47 +0200 |
Tom Gottfried |
Remove duplications from discharge prototypes and put it all together.
|
| Fri, 19 Sep 2014 16:29:11 +0200 |
Tom Gottfried |
Classify and sort iteration over user-data non-recommendations.
|
| Fri, 19 Sep 2014 16:07:59 +0200 |
Tom Gottfried |
Classify and sort iteration over non-recommendations.
|
| Fri, 19 Sep 2014 15:45:54 +0200 |
Tom Gottfried |
Classify and sort iteration over recommendations.
|
| Fri, 19 Sep 2014 15:31:03 +0200 |
Tom Gottfried |
Purge clash of out-names, resulting hacks and tests for not existing outs and give some more meaningful names.
|
| Fri, 19 Sep 2014 09:49:09 +0200 |
Tom Gottfried |
Official sedimentload epochs should be seperated from other data in datacage.
|
| Wed, 17 Sep 2014 13:24:13 +0200 |
Tom Gottfried |
Consider new SQ-diagrams in datacage config.
|
| Tue, 16 Sep 2014 16:10:30 +0200 |
Tom Gottfried |
Update comment on conditional loading of user content.
|
| Mon, 15 Sep 2014 11:58:31 +0200 |
Tom Gottfried |
Call orphaned macro originating from 'fix_wq_curve' in prototype.
|
| Mon, 15 Sep 2014 11:26:48 +0200 |
Tom Gottfried |
Make use of publicly available external WMS (Pegelonline) otherwise called from BfG-specific macro.
|
| Fri, 12 Sep 2014 19:09:24 +0200 |
Tom Gottfried |
Remove call of BfG-specific macro.
|
| Fri, 12 Sep 2014 13:12:25 +0200 |
Sascha L. Teichmann |
Added discharge curve prototye.
|
| Tue, 09 Sep 2014 10:53:50 +0200 |
Tom Gottfried |
Suggestion: Load official epochs via recommendations instead of a pseudo-calculation.
|
| Mon, 08 Sep 2014 15:54:12 +0200 |
Tom Gottfried |
Let official epochs be showy and remove detritus of 'yields' in datacage config.
|
| Mon, 08 Sep 2014 10:03:00 +0200 |
Tom Gottfried |
Allow fractions without SQ-time interval (suspended sediment) to be loaded.
|
| Tue, 02 Sep 2014 14:46:20 +0200 |
Tom Gottfried |
Make sedimentload loadable as old calculation.
|
| Mon, 01 Sep 2014 09:43:55 +0200 |
Tom Gottfried |
Handle missing years in bed height differences without assuming an unknown year to be BC 1.
|
| Thu, 28 Aug 2014 12:00:52 +0200 |
Tom Gottfried |
Quoting is done elsewhere since rev 7021753b3797.
|
| Tue, 26 Aug 2014 17:16:21 +0200 |
Tom Gottfried |
With the exception of real calculation results, descriptions of sediment loads can all follow the same pattern.
|
| Tue, 26 Aug 2014 12:09:18 +0200 |
Tom Gottfried |
Metadata in datacage tooltips for sediment densities, bed heights, flow velocities and sounding widhts.
|
| Fri, 22 Aug 2014 18:00:35 +0200 |
Tom Gottfried |
Tooltip for sediment loads in datacage.
|
| Fri, 22 Aug 2014 17:43:36 +0200 |
Tom Gottfried |
Add SQ time interval to selection tree in datacage for sediment loads.
|
| Fri, 22 Aug 2014 13:19:02 +0200 |
Tom Gottfried |
Remove code duplications in sedimentload datacage.
|
| Fri, 22 Aug 2014 08:04:43 +0200 |
Tom Gottfried |
Format timestamps in datacage tooltip for porosities.
|
| Wed, 20 Aug 2014 17:47:58 +0200 |
Tom Gottfried |
Reconstruct facet description of sediment load longitudinal sections. i18n will follow.
|
| Wed, 20 Aug 2014 17:07:17 +0200 |
Tom Gottfried |
Reconstruct facet description of sediment load at measurement stations. i18n will follow.
|
| Wed, 20 Aug 2014 12:12:18 +0200 |
Andre Heinecke |
Remove todos about sedimentload_ls facet
|
| Wed, 20 Aug 2014 12:10:32 +0200 |
Andre Heinecke |
Configure SedimentLoadLSFacet
|
| Tue, 19 Aug 2014 18:46:13 +0200 |
Tom Gottfried |
Distinction by measurement station gives lots of duplicates, as we always get a whole longitudinal section.
|
| Fri, 15 Aug 2014 18:24:55 +0200 |
Andre Heinecke |
Change sedimentload factory from yields to loads.
|
| Fri, 08 Aug 2014 13:24:11 +0200 |
Tom Gottfried |
Datacage config for new sediment load structures. Missing: some facets and everything down from the innermost macros for sediment load at measurement stations.
|
| Wed, 06 Aug 2014 19:17:12 +0200 |
Tom Gottfried |
SCHEMA CHANGE: rename database tables from yield to load_ls according to respective classes.
|
| Tue, 08 Jul 2014 18:19:04 +0200 |
Tom Gottfried |
merged default into branch facet-metadata.
facet-metadata
|
| Thu, 03 Jul 2014 16:36:43 +0200 |
Tom Gottfried |
Allow differences between years and epochs (accidentally did that in branch facet-metadata already too)
|
| Thu, 03 Jul 2014 16:34:28 +0200 |
Tom Gottfried |
Allow differences between years and epochs.
facet-metadata
|
| Thu, 03 Jul 2014 12:30:41 +0200 |
Raimund Renkert |
Added macro for middle bedheights for old calculations.
facet-metadata
|
| Fri, 27 Jun 2014 18:47:55 +0200 |
Tom Gottfried |
Exclude annotation types without trailing unit (assumed after whitespace).
|
| Fri, 27 Jun 2014 15:52:05 +0200 |
Tom Gottfried |
Minor cleanup in meta-data.xml.
|
| Fri, 27 Jun 2014 15:10:10 +0200 |
Raimund Renkert |
Select complete differences matrix to have a well sorted dc-tree.
|
| Fri, 27 Jun 2014 09:50:46 +0200 |
Raimund Renkert |
Fixed datacage info field for bed height differences.
|
| Thu, 26 Jun 2014 14:54:04 +0200 |
Raimund Renkert |
Updated macros and db statement for minfo bedheight differences.
|
| Fri, 20 Jun 2014 16:52:14 +0200 |
Sascha L. Teichmann |
DC: Flatten bed height diff tree a bit.
|
| Fri, 20 Jun 2014 16:41:30 +0200 |
Sascha L. Teichmann |
DC: Group bedheight diffs by both years.
|
| Fri, 20 Jun 2014 16:33:09 +0200 |
Raimund Renkert |
New macros for bed height differneces.
|
| Wed, 18 Jun 2014 15:30:39 +0200 |
Sascha L. Teichmann |
Datacage: Moved year filtering of bed heights to separate macro to be reusable in other contextes.
|
| Tue, 10 Jun 2014 12:51:08 +0200 |
Raimund Renkert |
Removed bed differences epoch from datacage.
|
| Fri, 06 Jun 2014 17:02:03 +0200 |
Raimund Renkert |
Removed datacage macro calls for bed height epochs.
|
| Wed, 04 Jun 2014 12:22:01 +0200 |
Tom Gottfried |
Allow differentiating between units of sediment sources/sinks in annotation types also in datacage.
|
| Fri, 30 May 2014 15:46:53 +0200 |
Tom Gottfried |
issue661: prototyped tooltip for porosities in datacage.
|
| Fri, 16 May 2014 13:17:29 +0200 |
Raimund Renkert |
Use description from database for i18n (completed revision dc8910e29dd4).
|
| Wed, 30 Apr 2014 15:29:50 +0200 |
Raimund Renkert |
merged.
|
| Wed, 30 Apr 2014 15:26:44 +0200 |
Raimund Renkert |
New macro for porosities in datacage config.
|
| Thu, 17 Apr 2014 11:42:12 +0200 |
Tom Gottfried |
Merged minfo-opt branch into default.
|
| Thu, 06 Mar 2014 17:30:59 +0100 |
Tom Gottfried |
Remove not publicly available WMS services and enable custom configuration through release script.
|
| Thu, 06 Mar 2014 14:10:00 +0100 |
Raimund Renkert |
Fixed datacage macro for winfo differences and added the new facet.
minfo-opt
|
| Tue, 17 Dec 2013 14:43:26 +0100 |
Andre Heinecke |
(issue1581) Remove Minfo-heights from differencable
|
| Mon, 09 Dec 2013 09:56:01 +0100 |
Felix Wolfsteller |
issue1020: Show official lines in datacage to compute uesks, too.
|
| Fri, 06 Dec 2013 16:47:02 +0100 |
Andre Heinecke |
(issue1474) Change order of measurement stations
|
| Fri, 06 Dec 2013 14:51:48 +0100 |
Tom Gottfried |
Order by years in SQ-relation datacage.
|
| Fri, 06 Dec 2013 14:27:03 +0100 |
Tom Gottfried |
Order by year in sediment yield datacage.
|
| Fri, 06 Dec 2013 13:58:27 +0100 |
Tom Gottfried |
Add sources/sinks to sediment yield datacage.
|
| Fri, 06 Dec 2013 13:17:05 +0100 |
Tom Gottfried |
Add recommendations for bed quality and flow velocity.
|
| Fri, 06 Dec 2013 12:10:24 +0100 |
Felix Wolfsteller |
issue1691: Sedimentload-fetching via datacage now picks right facet.
|
| Mon, 02 Dec 2013 10:08:23 +0100 |
Felix Wolfsteller |
issue1579: Load those official lines automatically.
|
| Mon, 02 Dec 2013 09:48:48 +0100 |
Felix Wolfsteller |
issue1579: Added macro to load interpolated official lines.
|
| Mon, 18 Nov 2013 12:30:36 +0100 |
Felix Wolfsteller |
issue1613: In DC, also show the 'diff' facets, define former calc. for hist. W/Q out.
|
| Mon, 18 Nov 2013 12:22:22 +0100 |
Felix Wolfsteller |
issue1631: Allow loading of some former historical-discharge facets.
|
| Thu, 14 Nov 2013 11:58:51 +0100 |
Felix Wolfsteller |
issue1020: Display more waterlevels for uesk.
|
| Tue, 12 Nov 2013 16:54:18 +0100 |
Sascha L. Teichmann |
Previous fix for flys/issue1675 was broken. :-/
|
| Tue, 12 Nov 2013 15:37:38 +0100 |
Sascha L. Teichmann |
Workaround for flys/issue1675: Guarantee that the years are always between 0 and 9999 in macro 'minfo-heights'.
|
| Wed, 06 Nov 2013 12:07:48 +0100 |
Felix Wolfsteller |
issue1664: Let DC instruct StaticWKmsArtifact to spawn facets
|
| Fri, 01 Nov 2013 15:05:35 +0100 |
Sascha L. Teichmann |
Datacage: Removed macro "delta-wt-ls" from meta-data.xml as it is not used.
3.0.17
|
| Fri, 01 Nov 2013 12:12:24 +0100 |
Felix Wolfsteller |
meta-data.xml: Removed junk.
|
| Fri, 01 Nov 2013 12:11:59 +0100 |
Felix Wolfsteller |
issue1571: Exclude vollmer curves from general longitudinal dc folder.
|
| Fri, 01 Nov 2013 11:13:38 +0100 |
Felix Wolfsteller |
issue1571: Hav eown folder in dc for vollmer curves.
|
| Thu, 31 Oct 2013 11:44:09 +0100 |
Felix Wolfsteller |
issue1657: Adjust DC conf to spawn sounding widths.
|
| Wed, 30 Oct 2013 16:04:06 +0100 |
Felix Wolfsteller |
issue1345: Add flow_velocities folder.
|
| Wed, 30 Oct 2013 15:02:16 +0100 |
Felix Wolfsteller |
issue1512: Fix loading of all former flow vel. calculation via folder.
|
| Wed, 30 Oct 2013 14:53:26 +0100 |
Felix Wolfsteller |
issue1512: Show all flowvelocity facet in former calc. flow vel. part of dc.
|
| Wed, 30 Oct 2013 12:03:07 +0100 |
Felix Wolfsteller |
issue1572: Call longitudinal-section-user-prototype for bedheight-diffs/year.
|
| Tue, 29 Oct 2013 11:32:56 +0100 |
Felix Wolfsteller |
issue1397: Fix reference_curve former calculations in dc.
|
| Tue, 29 Oct 2013 10:42:12 +0100 |
Felix Wolfsteller |
issue1512: Repair loading all of flowvelocitymeasurements by not equipping
|
| Mon, 28 Oct 2013 12:14:46 +0100 |
Felix Wolfsteller |
issue1345: Sort sediment densities by year.
|
| Mon, 28 Oct 2013 11:52:14 +0100 |
Felix Wolfsteller |
meta-data.xml: Simplify query for densities a bit, sort by depth.
|
| Fri, 25 Oct 2013 14:29:38 +0200 |
Felix Wolfsteller |
meta-data.xml: Include bedheight-diffs per year in minfo-user-dc.
|
| Fri, 25 Oct 2013 14:10:29 +0200 |
Felix Wolfsteller |
meta-data.xml: Subsume the different bed-quality dc-nodes.
|
| Fri, 25 Oct 2013 13:52:47 +0200 |
Felix Wolfsteller |
meta-data.xml: Ease i18nability.
|
| Fri, 25 Oct 2013 07:25:19 +0200 |
Felix Wolfsteller |
meta-data.xml: Remove duplicates and 'special' macros fro special outs from
|
| Fri, 25 Oct 2013 07:24:15 +0200 |
Felix Wolfsteller |
meta-data.xml: Remove delta-wt from longitudinal-section-user-prototype .
|
| Wed, 23 Oct 2013 17:45:56 +0200 |
Felix Wolfsteller |
Partly revert rev 7419, conservative guess about which "outs" are handcrafted.
|
| Wed, 23 Oct 2013 17:20:30 +0200 |
Felix Wolfsteller |
issue1345: Re-enable sediment load total loads, now that factory is fixed.
|
| Wed, 23 Oct 2013 17:08:07 +0200 |
Felix Wolfsteller |
issue1345: Showing sediment densitie by depth, comment total load.
|
| Wed, 23 Oct 2013 14:53:47 +0200 |
Tom Gottfried |
Fix typo.
|
| Wed, 23 Oct 2013 12:43:26 +0200 |
Andre Heinecke |
(issue965) Handle the case that diffids are not available
|
| Wed, 23 Oct 2013 12:09:36 +0200 |
Felix Wolfsteller |
meta-data.xml: Be less restrictive in showing facets from waterlevels-discharge.
|
| Wed, 23 Oct 2013 12:08:30 +0200 |
Felix Wolfsteller |
meta-data.xml: Exclude empty.facet s.
|
| Wed, 23 Oct 2013 12:07:35 +0200 |
Felix Wolfsteller |
meta-meta.xml: Also fetch extreme_base curves via dc.
|
| Wed, 23 Oct 2013 12:07:05 +0200 |
Felix Wolfsteller |
meta-data.xml: cosmetics.
|
| Wed, 23 Oct 2013 11:33:31 +0200 |
Felix Wolfsteller |
meta-data.xml: Cosmetics.
|
| Wed, 23 Oct 2013 11:22:47 +0200 |
Felix Wolfsteller |
meta-data.xml: More usage of collection-group-macro.
|
| Wed, 23 Oct 2013 11:28:25 +0200 |
Sascha L. Teichmann |
Datacage: Consequently call macro 'longitudinal-section-user-prototype' in all longitudinal sections of old calculation. Moved asymmeterical stuff to prototype. This may crash!
|
| Wed, 23 Oct 2013 11:04:06 +0200 |
Felix Wolfsteller |
meta-data.xml: Create and use collection-group macro.
|
| Tue, 22 Oct 2013 15:51:33 +0200 |
Felix Wolfsteller |
meta-data.xml: Switch more longitudinal-section like user-dc content to prototype macro.
|
| Tue, 22 Oct 2013 15:43:13 +0200 |
Sascha L. Teichmann |
Datacage: Fixed macro call.
|
| Tue, 22 Oct 2013 15:34:51 +0200 |
Sascha L. Teichmann |
Fixed meta-data.xml
|
| Tue, 22 Oct 2013 12:21:21 +0200 |
Felix Wolfsteller |
issue1512: Sort flow-velocity-models by discharge_zone.value.
|
| Tue, 22 Oct 2013 12:15:33 +0200 |
Felix Wolfsteller |
issue1473: Show differences project name in dc.
|
| Tue, 22 Oct 2013 11:57:17 +0200 |
Felix Wolfsteller |
meta-data.xml: Fix referenced out for discharge_longitudinal_section.
|
| Mon, 21 Oct 2013 19:05:41 +0200 |
Andre Heinecke |
(issue965) Add a comment to explain what we do here
|
| Mon, 21 Oct 2013 18:57:30 +0200 |
Andre Heinecke |
(issue965) Use new datacage magic to have year filtering for bedheights
|
| Mon, 21 Oct 2013 12:21:40 +0200 |
Felix Wolfsteller |
issue1521: Adhere more to dc 'spec', show discharges of flow velocity models.
|
| Thu, 17 Oct 2013 09:40:12 +0200 |
Felix Wolfsteller |
meta-data.xml: cleanup longitudinal-section-user-prototype, removing dupes.
|
| Thu, 17 Oct 2013 07:42:31 +0200 |
Felix Wolfsteller |
issue1473: Let vollmer curves appear under 'former calc/waterlevels from fix.'.
|
| Wed, 16 Oct 2013 18:48:02 +0200 |
Andre Heinecke |
Use more failsave pattern for SQ-facets.
|
| Wed, 16 Oct 2013 15:22:18 +0200 |
Felix Wolfsteller |
Offer total loads in dc.
|
| Wed, 16 Oct 2013 11:45:23 +0200 |
Andre Heinecke |
(issue1474) Add sqrelation user data and disable filtering for it
|
| Wed, 16 Oct 2013 11:42:53 +0200 |
Andre Heinecke |
Add debug output for variables in user context
|
| Tue, 15 Oct 2013 15:37:54 +0200 |
Felix Wolfsteller |
Add aforementioned user-prototype.
|
| Tue, 15 Oct 2013 15:37:24 +0200 |
Felix Wolfsteller |
Prototypically add longitudinal-section-user-prototype, with issues.
|
| Tue, 15 Oct 2013 15:06:29 +0200 |
Felix Wolfsteller |
issue1345: Show bedheight_type in tooltip.
|
| Tue, 15 Oct 2013 15:03:51 +0200 |
Felix Wolfsteller |
issue1345: Bring back waterlevel/diffs from fixation into minfo dc element.
|
| Tue, 15 Oct 2013 14:41:39 +0200 |
Felix Wolfsteller |
Fix DC group-by statement, there is no 'oid' variable around.
|
| Tue, 15 Oct 2013 07:06:19 +0200 |
Felix Wolfsteller |
issue1345: DC: group bed heights of single years by year.
|
| Mon, 14 Oct 2013 07:33:32 +0200 |
Felix Wolfsteller |
Comment in meta-data.xml.
|
| Fri, 11 Oct 2013 12:26:00 +0200 |
Felix Wolfsteller |
issue1345: include fix for display of epochs stoptime.
|
| Fri, 11 Oct 2013 12:22:40 +0200 |
Felix Wolfsteller |
issue1512: Adde flow-velocity-models dc conf.
|
| Thu, 10 Oct 2013 11:27:56 +0200 |
Felix Wolfsteller |
issue1345: Factored out description creation for loads. Make epochs show end time.
|
| Thu, 10 Oct 2013 11:22:16 +0200 |
Felix Wolfsteller |
issue1345: Added macro for the differing epoch-description, extended query.
|
| Thu, 10 Oct 2013 11:19:30 +0200 |
Felix Wolfsteller |
issue1345: Minor refactoring, made structure for epoch loads equal year loads.
|
| Thu, 10 Oct 2013 11:10:50 +0200 |
Felix Wolfsteller |
issue1345: Show fraction and year for sediment load dc subtree.
|
| Thu, 10 Oct 2013 09:49:01 +0200 |
Felix Wolfsteller |
Revert 7273, add undefined macro to meta-data.xml.
|
| Wed, 09 Oct 2013 17:56:39 +0200 |
Tom Gottfried |
Remove annotations from reference curve recommendations. There is no km-axis.
|
| Wed, 09 Oct 2013 16:33:56 +0200 |
Sascha L. Teichmann |
DC: Remove accidentaly used user-macro from system-content part.
|
| Wed, 09 Oct 2013 16:20:33 +0200 |
Sascha L. Teichmann |
Removed calls to undefined macro.
|
| Wed, 09 Oct 2013 16:19:13 +0200 |
Sascha L. Teichmann |
Removed duplicate macro.
|
| Wed, 09 Oct 2013 12:46:40 +0200 |
Tom Gottfried |
fixed typo.
|
| Wed, 09 Oct 2013 11:20:06 +0200 |
Felix Wolfsteller |
meta-data.xml: Add more entries to discharge datacage ('user-part').
|
| Wed, 09 Oct 2013 10:03:00 +0200 |
Felix Wolfsteller |
meta-data.xml: Let DC show (yet all) computed discharge curves as former calculations.
|
| Wed, 09 Oct 2013 10:01:00 +0200 |
Felix Wolfsteller |
meta-data.xml: Refactored discharge-curve-prototype.
|
| Wed, 09 Oct 2013 09:57:49 +0200 |
Felix Wolfsteller |
meta-data.xml: Add a macro to load previous discharge calculations.
|
| Wed, 02 Oct 2013 17:04:23 +0200 |
Andre Heinecke |
(issue1474) Add datacage loading for SQ Relations
|
| Fri, 04 Oct 2013 12:16:37 +0200 |
Felix Wolfsteller |
Removed TODO which was already done.
|
| Fri, 04 Oct 2013 11:59:26 +0200 |
Felix Wolfsteller |
issue1345: call longitudinal-section-prototype macro for flow-veloc. DC. Added todo.
|
| Fri, 04 Oct 2013 11:37:50 +0200 |
Felix Wolfsteller |
issue 1345: Let sediment-load dc-config call longitdunal-section-prototype macro.
|
| Fri, 04 Oct 2013 11:11:48 +0200 |
Felix Wolfsteller |
issue1345: Also let bed-quality use longitudinal-section-prototype.
|
| Fri, 04 Oct 2013 10:52:07 +0200 |
Felix Wolfsteller |
issue1345: adjust dc-conf for befheight-diffs: is now longitudinal-section-prototype.
|
| Fri, 04 Oct 2013 07:49:21 +0200 |
Felix Wolfsteller |
issue1345: meta-data.xml: For bedheight_middle, use the longitudinal-section-prototype.
|
| Wed, 02 Oct 2013 14:14:09 +0200 |
Felix Wolfsteller |
meta-meta.xml: remove debugging info content.
|
| Wed, 02 Oct 2013 14:13:19 +0200 |
Felix Wolfsteller |
issue1345: add flowvelocity-macro to winfo longitudinal-section.
|
| Wed, 02 Oct 2013 11:44:23 +0200 |
Felix Wolfsteller |
issue1435: DC layout for sediment-loads more the way its requested.
|
| Tue, 01 Oct 2013 10:01:00 +0200 |
Felix Wolfsteller |
issue1435: Add bedheights and morph. width to LS DC conf.
|
| Mon, 30 Sep 2013 17:33:29 +0200 |
Felix Wolfsteller |
issue1435: Call densities-macro of meta-data.xml thus show densities in datacage.
|
| Mon, 30 Sep 2013 17:32:47 +0200 |
Felix Wolfsteller |
issue1435: Add densities-macro to meta-data.xml .
|
| Fri, 27 Sep 2013 22:09:12 +0200 |
Felix Wolfsteller |
issue1435: Remove hardcoded river for dc sediment yield sql query.
|
| Fri, 27 Sep 2013 16:13:54 +0200 |
Felix Wolfsteller |
issue1435: In DC conf, show sedimentyields in yield/[year|epoch]- structure, i18n.
|
| Fri, 27 Sep 2013 14:42:03 +0200 |
Felix Wolfsteller |
issue1435: meta-data.xml: Add sedimentload/yield- part to minfo part of dc.
|
| Thu, 26 Sep 2013 19:14:37 +0200 |
Andre Heinecke |
Fix wrong usage of a_id and add more datacage stuff to WSPL longitundinal
|
| Thu, 26 Sep 2013 17:31:25 +0200 |
Tom Gottfried |
Filter waterleveldifferences according to unit.
|
| Thu, 26 Sep 2013 16:18:55 +0200 |
Tom Gottfried |
Filter prefix of descriptions of MINFO-WSTs.
|
| Thu, 26 Sep 2013 16:17:36 +0200 |
Tom Gottfried |
Move MINFO-fixation-stuff to MINFO-datacage and give specified names.
|
| Thu, 26 Sep 2013 13:56:54 +0200 |
Felix Wolfsteller |
issue1435: Group minfo-stuff in dc, include waterlevels from csv.
|
| Mon, 16 Sep 2013 15:45:51 +0200 |
Andre Heinecke |
Fix syntax error on oracle by removing unused paramater
|
| Thu, 12 Sep 2013 10:13:09 +0200 |
Tom Gottfried |
merged accidental head (nothing changed)
|
| Tue, 10 Sep 2013 15:22:59 +0200 |
Felix Wolfsteller |
issue1378: For additionals and basedata via datacage for
|
| Wed, 21 Aug 2013 11:12:39 +0200 |
Felix Wolfsteller |
issue1378 (part): Make DC config for discharge curve offer correct
|
| Fri, 16 Aug 2013 11:30:07 +0200 |
Andre Heinecke |
(issue1391): Build the current discarge curve name as requested
|
| Fri, 16 Aug 2013 09:39:27 +0200 |
Andre Heinecke |
(issue1391) Filter by reference_gauge or by KM
|
| Thu, 08 Aug 2013 17:36:44 +0200 |
Tom Gottfried |
merged changes from default into longitudinal-symmetry branch
longitudinal-symmetry
|
| Wed, 07 Aug 2013 18:57:29 +0200 |
Tom Gottfried |
merged changes from default into longitudinal-symmetrie branch
longitudinal-symmetry
|
| Wed, 07 Aug 2013 18:53:15 +0200 |
Tom Gottfried |
merge changes from default into longitudinal-symmetrie branch and make it build
longitudinal-symmetry
|
| Thu, 08 Aug 2013 12:06:54 +0200 |
Felix Wolfsteller |
offer differences for bedheight-diffs in dc, and bedheight diffs in ls.
|
| Wed, 07 Aug 2013 18:24:07 +0200 |
Andre Heinecke |
Remove accidentally commited debug output
|
| Thu, 01 Aug 2013 15:16:32 +0200 |
Felix Wolfsteller |
meta-data.xml/DC: Automatically add annotations to middle bed height diagrams.
|
| Tue, 30 Jul 2013 19:14:49 +0200 |
Andre Heinecke |
issue1391: Some more unification fix km filtering for calculated discharges
3.0.13
|
| Mon, 29 Jul 2013 17:27:48 +0200 |
Andre Heinecke |
Fix syntax error
|
| Mon, 29 Jul 2013 12:16:12 +0200 |
Andre Heinecke |
issue1391: Unify datacage elements in discharge curve outs and add historical discharges
|
| Mon, 29 Jul 2013 12:14:51 +0200 |
Andre Heinecke |
issue1391: Fix syntax in gauge macros and add km filtering
|
| Thu, 25 Jul 2013 07:22:28 +0200 |
Felix Wolfsteller |
fix issue1412: make vollmer-curves functional in middle bedheight diagrams.
|
| Thu, 25 Jul 2013 07:12:51 +0200 |
Felix Wolfsteller |
meta-data.xml: Partly fix a filter expression (unclodes literal).
|
| Wed, 24 Jul 2013 19:03:33 +0200 |
Andre Heinecke |
Cast ld values to varchar in user artifacts statement
|
| Wed, 24 Jul 2013 18:20:16 +0200 |
Andre Heinecke |
Add zero padding to minutes and seconds of a_creation times
|
| Wed, 24 Jul 2013 17:34:48 +0200 |
Andre Heinecke |
Add some useful debug output.
|
| Wed, 24 Jul 2013 17:24:02 +0200 |
Tom Gottfried |
fixed statement for floodplains in datacage-config (with Andre's eyes)
|
