log flys-artifacts/ChangeLog @ 726:cbaa3ca86f2f

age author description
Thu, 23 Jun 2011 12:19:12 +0000 Sascha L. Teichmann Added base class WQ for WQKms.
Thu, 23 Jun 2011 08:58:30 +0000 Sascha L. Teichmann Corrected configuration for error reports.
Wed, 22 Jun 2011 14:47:22 +0000 Ingo Weinzierl #164 Create the items for the adapted WQ state with range information for W and Q.
Wed, 22 Jun 2011 10:54:30 +0000 Sascha L. Teichmann "Abflusskurve am Pegel" looks correct again.
Wed, 22 Jun 2011 10:36:27 +0000 Sascha L. Teichmann Improved situtation on rendering "Abflusskurve am Pegel". Not fully working, yet.
Wed, 22 Jun 2011 09:19:16 +0000 Sascha L. Teichmann Generate facets for "Abflusskurven am Pegel". Not working by now. :-/
Wed, 22 Jun 2011 06:51:36 +0000 Ingo Weinzierl #161 Include the 0 on the second y axis (the Q axis) in longitudinal section charts intially.
Tue, 21 Jun 2011 21:41:49 +0000 Sascha L. Teichmann Draw correction curve again.
Tue, 21 Jun 2011 18:10:49 +0000 Ingo Weinzierl #157 Computed discharge curve charts always have a lower bound set to 0.
Tue, 21 Jun 2011 17:39:29 +0000 Ingo Weinzierl #90 Added a margin between chart data and chart axes to avoid displaying curves on the chart border.
Tue, 21 Jun 2011 17:03:46 +0000 Sascha L. Teichmann Fix for flys/issue158
Tue, 21 Jun 2011 16:31:19 +0000 Sascha L. Teichmann Fix for flys/issue154
Tue, 21 Jun 2011 16:22:28 +0000 Sascha L. Teichmann Only generate 'outs' if they have facets.
Tue, 21 Jun 2011 14:33:00 +0000 Ingo Weinzierl Put the time-to-live of the collection into its DESCRIBE document.
Mon, 20 Jun 2011 14:36:42 +0000 Sascha L. Teichmann Configured states to generate report facets.
Mon, 20 Jun 2011 14:14:20 +0000 Sascha L. Teichmann Generate report facets if there are problems with the calculations.
Mon, 20 Jun 2011 13:47:59 +0000 Sascha L. Teichmann Added generator and facet for error reports.
Mon, 20 Jun 2011 12:32:32 +0000 Sascha L. Teichmann New model to transport data and error reports of calculations.
Sat, 18 Jun 2011 20:20:34 +0000 Sascha L. Teichmann Added calculation "am Pegel" version to the "Wasserspiegellage" calculation.
Sat, 18 Jun 2011 18:19:34 +0000 Sascha L. Teichmann Removed dead code.
Sat, 18 Jun 2011 17:03:17 +0000 Sascha L. Teichmann Only generate facets when needed.
Fri, 17 Jun 2011 16:17:03 +0000 Sascha L. Teichmann Merged revisions 2127-2133,2136-2137,2140,2143-2144,2146,2150-2151,2153-2154 via svnmerge from
Fri, 17 Jun 2011 13:00:54 +0000 Ingo Weinzierl Added a parameter 'wq_free' that determines that mode of calculation 1 (specifies if the calculation is bound to a gauge or not).
Fri, 17 Jun 2011 12:38:41 +0000 Ingo Weinzierl DischargeLongitudinalSectionCurve will have corrected W facets now.
Wed, 15 Jun 2011 15:28:54 +0000 Ingo Weinzierl Merged with trunk and introduced hashing of computed values. facets-slt
Tue, 14 Jun 2011 16:26:59 +0000 Sascha L. Teichmann DistanceInfoService: Got rid of namespace in result document.
Tue, 14 Jun 2011 15:34:27 +0000 Ingo Weinzierl #77 The curves in a duration chart will have names now.
Tue, 14 Jun 2011 13:54:19 +0000 Ingo Weinzierl The min/max W/Q ranges in the panel for calculation4 are written into the DESCRIBE.
Tue, 14 Jun 2011 13:53:25 +0000 Sascha L. Teichmann Write top 'Oberkante' and bottom 'Unterkante' to out going XML if they exist.
Tue, 14 Jun 2011 10:38:00 +0000 Ingo Weinzierl The state that is used to enter locations writes the river's range into the DESCRIBE now.
Fri, 10 Jun 2011 15:59:47 +0000 Sascha L. Teichmann Added error reporting to 'Wasserspiegellage' calculation.
Fri, 10 Jun 2011 14:24:15 +0000 Sascha L. Teichmann Added error reporting to 'Abflusskurve' calculation.
Fri, 10 Jun 2011 12:38:08 +0000 Sascha L. Teichmann Added error reporting to 'Dauerzahlen' calculation.
Fri, 10 Jun 2011 10:10:04 +0000 Sascha L. Teichmann Added methods to remove NaN values.
Fri, 10 Jun 2011 09:19:27 +0000 Sascha L. Teichmann Added calculation base class to collect the problems during the calculations. Adjusted calculation 4 to use the mechanism.
Thu, 09 Jun 2011 10:48:13 +0000 Ingo Weinzierl Changed the zoom process - the values in the chart request document are percentual values that apply to every axis.
Thu, 09 Jun 2011 10:31:22 +0000 Ingo Weinzierl Corrected axes/datasets mappings.
Wed, 08 Jun 2011 19:11:18 +0000 Sascha L. Teichmann Berechnung 4: Determine the gauges by their station position. This hopefully fixes segment assignment problems.
Wed, 08 Jun 2011 18:50:40 +0000 Sascha L. Teichmann Berechnung 4: Added more debug output
Wed, 08 Jun 2011 13:57:43 +0000 Ingo Weinzierl #103 PART 1: The numbers which are written into the static DESCRIBE part are i18n formatted now.
Wed, 08 Jun 2011 13:32:56 +0000 Ingo Weinzierl #93 Changed the name of calculation type 4.
Wed, 08 Jun 2011 13:03:21 +0000 Ingo Weinzierl Made the chart range determination more robust against NaN values.
Wed, 08 Jun 2011 12:35:44 +0000 Ingo Weinzierl Set the second y axis to axis position 1 (starts at 0).
Wed, 08 Jun 2011 10:25:39 +0000 Sascha L. Teichmann s@m³/s@m\\u00b3/s@
Wed, 08 Jun 2011 10:21:36 +0000 Sascha L. Teichmann s@m³/s@m\u00b3/s@
Wed, 08 Jun 2011 10:19:23 +0000 Sascha L. Teichmann Only generate an axis element if a axis really exists.
Tue, 07 Jun 2011 21:01:09 +0000 Sascha L. Teichmann BackJumpCorrector: Simpified array swapping.
Tue, 07 Jun 2011 15:05:12 +0000 Sascha L. Teichmann Use java.util.List instead of java.util.Vector. Removed superfluous imports.

http://dive4elements.wald.intevation.org