Mon, 16 Feb 2015 18:03:09 +0100 |
Andre Heinecke |
(Issue1755) Add distance step selection to bed quality artifact
|
Mon, 16 Feb 2015 11:48:05 +0100 |
Tom Gottfried |
Meta-data on sounding width associated to bed heights is redundant to real data associated to values.
|
Mon, 16 Feb 2015 09:00:08 +0100 |
Tom Gottfried |
Morphological width imported and stored with heights is redundant to table morphologic_width.
|
Fri, 13 Feb 2015 13:44:52 +0100 |
Andre Heinecke |
(issue1753) Remove "measured" from CSV header
|
Fri, 13 Feb 2015 12:35:18 +0100 |
Andre Heinecke |
(issue1753) Add measurements to CSV export
|
Thu, 30 Oct 2014 15:03:55 +0100 |
Tom Gottfried |
Remove obsolete historical discharge curve implementations.
|
Mon, 20 Oct 2014 13:48:51 +0200 |
Tom Gottfried |
Unify descriptions of model discharge curve at gauge.
|
Fri, 17 Oct 2014 19:13:40 +0200 |
Tom Gottfried |
i18n cleanup.
|
Fri, 17 Oct 2014 13:34:47 +0200 |
Raimund Renkert |
Added i18n strings for sounding width and data gap.
|
Tue, 14 Oct 2014 15:22:11 +0200 |
Tom Gottfried |
Put date range into facet descriptions for curve and measurements.
|
Wed, 08 Oct 2014 15:41:47 +0200 |
Tom Gottfried |
Further subtitle cleanup (including obsolete classes using them).
|
Tue, 07 Oct 2014 15:23:08 +0200 |
Tom Gottfried |
Unify discharge curve subtitles.
|
Thu, 02 Oct 2014 19:31:09 +0200 |
Tom Gottfried |
Make derived curve-diagram working with subtitle.
|
Thu, 02 Oct 2014 14:01:13 +0200 |
Raimund Renkert |
Added i18n strings.
|
Wed, 01 Oct 2014 15:54:47 +0200 |
Tom Gottfried |
Purge obsolete representation of reference system for discharge tables.
|
Wed, 01 Oct 2014 13:40:39 +0200 |
Raimund Renkert |
Updated i18n strings.
|
Fri, 12 Sep 2014 19:00:45 +0200 |
Tom Gottfried |
A bit less chaos in i18n for bed heights.
|
Thu, 11 Sep 2014 17:37:03 +0200 |
Tom Gottfried |
Making i18n work was just easier using less wrappers in this case (issue1631).
|
Tue, 09 Sep 2014 18:41:11 +0200 |
Tom Gottfried |
Fix duration curve i18n.
|
Tue, 09 Sep 2014 17:05:21 +0200 |
Tom Gottfried |
Some i18n completion in hist. discharge curves.
|
Mon, 08 Sep 2014 16:18:37 +0200 |
Andre Heinecke |
(issue1448) Add l10n for new sq time interval state.
|
Mon, 08 Sep 2014 15:54:12 +0200 |
Tom Gottfried |
Let official epochs be showy and remove detritus of 'yields' in datacage config.
|
Fri, 05 Sep 2014 20:57:31 +0200 |
Tom Gottfried |
Error reports for sediment load calculation.
|
Wed, 03 Sep 2014 16:46:09 +0200 |
Tom Gottfried |
Complete CSV-export and correct headers.
|
Mon, 01 Sep 2014 12:34:39 +0200 |
Tom Gottfried |
Fix fraction respectively facet names and descriptions.
|
Tue, 26 Aug 2014 17:16:21 +0200 |
Tom Gottfried |
With the exception of real calculation results, descriptions of sediment loads can all follow the same pattern.
|
Wed, 20 Aug 2014 17:54:12 +0200 |
Tom Gottfried |
i18n for sediment loads.
|
Wed, 20 Aug 2014 14:26:42 +0200 |
Andre Heinecke |
Change facet.sedimentload.dc to facet.sedimentload.ls
|
Wed, 20 Aug 2014 13:17:20 +0200 |
Andre Heinecke |
(issue1681) Add l10n for grain fractions
|
Wed, 20 Aug 2014 12:59:01 +0200 |
Andre Heinecke |
Fix typo in sedimentload i18n
|
Fri, 04 Jul 2014 09:11:37 +0200 |
Raimund Renkert |
Updated german i18n strings.
facet-metadata
|
Thu, 03 Jul 2014 11:34:46 +0200 |
Raimund Renkert |
Added i18n strings.
facet-metadata
|
Wed, 02 Jul 2014 14:42:43 +0200 |
Raimund Renkert |
Add meta data to middle bed height CSV export.
facet-metadata
|
Tue, 24 Jun 2014 16:02:41 +0200 |
Tom Gottfried |
issue1633: Add missing info line.
|
Thu, 19 Jun 2014 15:02:41 +0200 |
Sascha L. Teichmann |
Removed more anomalies from i18n.
|
Thu, 19 Jun 2014 14:48:11 +0200 |
Sascha L. Teichmann |
Run native2ascii over i18n files.
|
Thu, 19 Jun 2014 13:36:40 +0200 |
Raimund Renkert |
Fixed i18n string in german translation.
|
Tue, 17 Jun 2014 17:57:25 +0200 |
Tom Gottfried |
issue1633: Add info lines in SQ-relation CSV export.
|
Fri, 13 Jun 2014 16:34:29 +0200 |
Tom Gottfried |
Add unit for Q in SQ relation exports.
|
Wed, 04 Jun 2014 12:53:28 +0200 |
Sascha L. Teichmann |
Added diff pair column to CSV export of bed height differences. TODO: same for PDF, adjust client.
|
Fri, 30 May 2014 16:56:40 +0200 |
Tom Gottfried |
issue1628: correct unit and at least partly complete column name for CSV.
|
Fri, 16 May 2014 12:26:11 +0200 |
Tom Gottfried |
Number an unit have to separated by whitespace.
|
Fri, 16 May 2014 12:11:31 +0200 |
Tom Gottfried |
i18n for porosities (needs to be filled with data).
|
Wed, 14 May 2014 16:58:07 +0200 |
Tom Gottfried |
Corrected wording for moving average.
|
Fri, 28 Mar 2014 11:22:55 +0100 |
Raimund Renkert |
Added i18n stings for morph active width.
minfo-opt
|
Fri, 07 Mar 2014 11:16:24 +0100 |
Raimund Renkert |
Added i18n strings for chart subtitle.
minfo-opt
|
Thu, 06 Mar 2014 14:10:24 +0100 |
Raimund Renkert |
Added i18n strings for winfo difference facet names.
minfo-opt
|
Fri, 20 Dec 2013 13:06:03 +0100 |
Andre Heinecke |
Areas are not Volumes!
|
Tue, 03 Dec 2013 18:00:35 +0100 |
Andre Heinecke |
(issue1610) Add units also for _de
|
Mon, 02 Dec 2013 14:47:51 +0100 |
Felix Wolfsteller |
issue1043: Add i18n for 'dm'.
|
Wed, 27 Nov 2013 11:05:38 +0100 |
Felix Wolfsteller |
issue1596: Add unit to middlebedheight csv header.
|
Thu, 21 Nov 2013 15:33:42 +0100 |
Andre Heinecke |
issue1225 Add i18n for bedheight and use wst height system as unit
|
Wed, 13 Nov 2013 12:00:21 +0100 |
Felix Wolfsteller |
Fix i18n.
|
Wed, 13 Nov 2013 11:59:26 +0100 |
Felix Wolfsteller |
issue1611,1046: Adjusted i18n for tau.
|
Wed, 13 Nov 2013 11:32:47 +0100 |
Felix Wolfsteller |
issue1592: Fix csv headers for w or q calculations.
|
Fri, 08 Nov 2013 18:04:51 +0100 |
Sascha L. Teichmann |
Some i18n for Vollmer curve calculation.
3.0.18
|
Fri, 08 Nov 2013 12:27:08 +0100 |
Felix Wolfsteller |
Fix i18n (missing closing bracket).
|
Thu, 07 Nov 2013 19:31:16 +0100 |
Tom Gottfried |
Add units to bedquality exporter columns.
|
Thu, 07 Nov 2013 18:13:45 +0100 |
Tom Gottfried |
Change column name in bedheight export.
|
Thu, 07 Nov 2013 11:10:58 +0100 |
Felix Wolfsteller |
issue1512: i18n.
|
Mon, 04 Nov 2013 17:13:44 +0100 |
Felix Wolfsteller |
issue1658: i18n for upcoming sediment load facet names (including t/a or m^3/a).
|
Thu, 31 Oct 2013 11:41:39 +0100 |
Felix Wolfsteller |
i18n for sounding with axis and facet.
|
Fri, 18 Oct 2013 12:20:55 +0200 |
Felix Wolfsteller |
issue1512: improved i18n for flow velocity measurement facets.
|
Wed, 16 Oct 2013 15:21:14 +0200 |
Felix Wolfsteller |
Added i18n for upcoming total load via dc.
|
Mon, 14 Oct 2013 17:40:31 +0200 |
Felix Wolfsteller |
have same translations for sediment loads fractions.
|
Mon, 14 Oct 2013 12:16:33 +0200 |
Felix Wolfsteller |
Added sedimentdensity i18n.
|
Mon, 14 Oct 2013 10:01:33 +0200 |
Felix Wolfsteller |
i18n for dc and facet name generation.
|
Wed, 02 Oct 2013 17:04:23 +0200 |
Andre Heinecke |
(issue1474) Add datacage loading for SQ Relations
|
Tue, 24 Sep 2013 12:25:36 +0200 |
Andre Heinecke |
Migrate w_differences and remove unused classes
generator-refactoring
|
Mon, 23 Sep 2013 16:41:12 +0200 |
Andre Heinecke |
Add refactored LongitudinalSectionGenerator2 that inherits DiagramGenerator
generator-refactoring
|
Wed, 11 Sep 2013 13:15:30 +0200 |
Sascha L. Teichmann |
flys/issue1485 Better titles for UESK layers.
|
Wed, 21 Aug 2013 17:15:06 +0200 |
Tom Gottfried |
Give correct name to outlier method
3.0.14
|
Mon, 19 Aug 2013 12:43:24 +0200 |
Felix Wolfsteller |
issue1225: Add bedheight/year-difference points with a scale factor,
|
Wed, 14 Aug 2013 15:23:36 +0200 |
Andre Heinecke |
(issue1347) Add new variables to SQ Relation output.
|
Fri, 09 Aug 2013 12:11:53 +0200 |
Tom Gottfried |
Moved most of the functionality of FlowVelocityGenerator to LongitudinalSectionGenerator on the way to longitudinal-section symmetry. ToDos left.
longitudinal-symmetry
|
Thu, 08 Aug 2013 15:46:18 +0200 |
Felix Wolfsteller |
issue1060: i18n.
|
Tue, 06 Aug 2013 16:56:45 +0200 |
Felix Wolfsteller |
issue1416: exporter for sedimentload and i18n.
|
Mon, 29 Jul 2013 09:28:32 +0200 |
Felix Wolfsteller |
Prepare i18n for issue1416.
|
Tue, 23 Jul 2013 17:11:07 +0200 |
Tom Gottfried |
More correct i18n string for outlier tolerance in SQ
|
Thu, 18 Jul 2013 17:55:57 +0200 |
Andre Heinecke |
Sync not in gauge string between de and de_DE
3.0.11
|
Fri, 28 Jun 2013 20:20:14 +0200 |
Sascha L. Teichmann |
artifacts: Desktop-FLYS conform official line messages in error reports.
|
Fri, 28 Jun 2013 14:11:58 +0200 |
Sascha L. Teichmann |
Amtl. Linien: Added report if an official line was found in report.
|
Thu, 27 Jun 2013 10:46:13 +0200 |
Felix Wolfsteller |
i18n for axis labels.
|
Wed, 26 Jun 2013 23:07:51 +0200 |
Felix Wolfsteller |
Added translations for fix w/q y- axis.
|
Wed, 26 Jun 2013 21:51:47 +0200 |
Bernhard Reiter |
Corrected typos in "Eingabe fär Q Daten".
|
Thu, 13 Jun 2013 11:43:02 +0200 |
Andre Heinecke |
Add special case handling for Fixing AT export at a gauge
|
Wed, 12 Jun 2013 16:10:56 +0200 |
Andre Heinecke |
Update PDF/CSV export for discharge curves
|
Mon, 10 Jun 2013 16:30:41 +0200 |
Raimund Renkert |
I18N strings for facet descriptions.
|
Mon, 10 Jun 2013 13:43:53 +0200 |
Christian Lins |
Enhance WSPLGEN legend's class names (#767).
|
Mon, 10 Jun 2013 13:06:03 +0200 |
Andre Heinecke |
Implement pdf export for bedheight differences
|
Thu, 06 Jun 2013 16:43:37 +0200 |
Raimund Renkert |
I18N strings for bed difference CSV file header.
|
Tue, 04 Jun 2013 13:28:31 +0200 |
Christian Lins |
i18n: German Ãsg -> ÃSG
|
Mon, 03 Jun 2013 17:15:09 +0200 |
Andre Heinecke |
Implement PDF export for SQ Relation
|
Mon, 03 Jun 2013 14:53:08 +0200 |
Felix Wolfsteller |
issue986: i18n, include wst-unit in axis label.
|
Mon, 03 Jun 2013 13:46:20 +0200 |
Felix Wolfsteller |
i18n for issue1225: river-km/$river-km .
|
Mon, 03 Jun 2013 10:23:20 +0200 |
Andre Heinecke |
Add l10n for issue1310
|