Mercurial > dive4elements > river

log flys-artifacts/ChangeLog @ 713:dc3a8c45349b

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
less more | (0) -240 tip
age author description
Tue, 21 Jun 2011 14:33:00 +0000 Ingo Weinzierl Put the time-to-live of the collection into its DESCRIBE document.
Mon, 20 Jun 2011 14:36:42 +0000 Sascha L. Teichmann Configured states to generate report facets.
Mon, 20 Jun 2011 14:14:20 +0000 Sascha L. Teichmann Generate report facets if there are problems with the calculations.
Mon, 20 Jun 2011 13:47:59 +0000 Sascha L. Teichmann Added generator and facet for error reports.
Mon, 20 Jun 2011 12:32:32 +0000 Sascha L. Teichmann New model to transport data and error reports of calculations.
Sat, 18 Jun 2011 20:20:34 +0000 Sascha L. Teichmann Added calculation "am Pegel" version to the "Wasserspiegellage" calculation.
Sat, 18 Jun 2011 18:19:34 +0000 Sascha L. Teichmann Removed dead code.
Sat, 18 Jun 2011 17:03:17 +0000 Sascha L. Teichmann Only generate facets when needed.
Fri, 17 Jun 2011 16:17:03 +0000 Sascha L. Teichmann Merged revisions 2127-2133,2136-2137,2140,2143-2144,2146,2150-2151,2153-2154 via svnmerge from
Fri, 17 Jun 2011 13:00:54 +0000 Ingo Weinzierl Added a parameter 'wq_free' that determines that mode of calculation 1 (specifies if the calculation is bound to a gauge or not).
Fri, 17 Jun 2011 12:38:41 +0000 Ingo Weinzierl DischargeLongitudinalSectionCurve will have corrected W facets now.
Wed, 15 Jun 2011 15:28:54 +0000 Ingo Weinzierl Merged with trunk and introduced hashing of computed values. facets-slt
Tue, 14 Jun 2011 16:26:59 +0000 Sascha L. Teichmann DistanceInfoService: Got rid of namespace in result document.
Tue, 14 Jun 2011 15:34:27 +0000 Ingo Weinzierl #77 The curves in a duration chart will have names now.
Tue, 14 Jun 2011 13:54:19 +0000 Ingo Weinzierl The min/max W/Q ranges in the panel for calculation4 are written into the DESCRIBE.
Tue, 14 Jun 2011 13:53:25 +0000 Sascha L. Teichmann Write top 'Oberkante' and bottom 'Unterkante' to out going XML if they exist.
Tue, 14 Jun 2011 10:38:00 +0000 Ingo Weinzierl The state that is used to enter locations writes the river's range into the DESCRIBE now.
Fri, 10 Jun 2011 15:59:47 +0000 Sascha L. Teichmann Added error reporting to 'Wasserspiegellage' calculation.
Fri, 10 Jun 2011 14:24:15 +0000 Sascha L. Teichmann Added error reporting to 'Abflusskurve' calculation.
Fri, 10 Jun 2011 12:38:08 +0000 Sascha L. Teichmann Added error reporting to 'Dauerzahlen' calculation.
Fri, 10 Jun 2011 10:10:04 +0000 Sascha L. Teichmann Added methods to remove NaN values.
Fri, 10 Jun 2011 09:19:27 +0000 Sascha L. Teichmann Added calculation base class to collect the problems during the calculations. Adjusted calculation 4 to use the mechanism.
Thu, 09 Jun 2011 10:48:13 +0000 Ingo Weinzierl Changed the zoom process - the values in the chart request document are percentual values that apply to every axis.
Thu, 09 Jun 2011 10:31:22 +0000 Ingo Weinzierl Corrected axes/datasets mappings.
Wed, 08 Jun 2011 19:11:18 +0000 Sascha L. Teichmann Berechnung 4: Determine the gauges by their station position. This hopefully fixes segment assignment problems.
Wed, 08 Jun 2011 18:50:40 +0000 Sascha L. Teichmann Berechnung 4: Added more debug output
Wed, 08 Jun 2011 13:57:43 +0000 Ingo Weinzierl #103 PART 1: The numbers which are written into the static DESCRIBE part are i18n formatted now.
Wed, 08 Jun 2011 13:32:56 +0000 Ingo Weinzierl #93 Changed the name of calculation type 4.
Wed, 08 Jun 2011 13:03:21 +0000 Ingo Weinzierl Made the chart range determination more robust against NaN values.
Wed, 08 Jun 2011 12:35:44 +0000 Ingo Weinzierl Set the second y axis to axis position 1 (starts at 0).
Wed, 08 Jun 2011 10:25:39 +0000 Sascha L. Teichmann s@m³/s@m\\u00b3/s@
Wed, 08 Jun 2011 10:21:36 +0000 Sascha L. Teichmann s@m³/s@m\u00b3/s@
Wed, 08 Jun 2011 10:19:23 +0000 Sascha L. Teichmann Only generate an axis element if a axis really exists.
Tue, 07 Jun 2011 21:01:09 +0000 Sascha L. Teichmann BackJumpCorrector: Simpified array swapping.
Tue, 07 Jun 2011 15:05:12 +0000 Sascha L. Teichmann Use java.util.List instead of java.util.Vector. Removed superfluous imports.
Tue, 07 Jun 2011 14:28:44 +0000 Sascha L. Teichmann code clean up in states
Tue, 07 Jun 2011 13:15:02 +0000 Ingo Weinzierl The ChartInfoGenerator appends axes range information to the document now.
Tue, 07 Jun 2011 11:43:30 +0000 Sascha L. Teichmann If Artifact.feed() fails do not store invalid values in database.
Mon, 06 Jun 2011 11:34:44 +0000 Sascha L. Teichmann Removed asymmetrical "- 1" from width calculation.
Sun, 05 Jun 2011 20:47:51 +0000 Sascha L. Teichmann Berechnung 4: Fixed problem when more than one value per segment are given.
Sun, 05 Jun 2011 18:24:46 +0000 Sascha L. Teichmann Refactored version of "Berechnung 4"
Fri, 03 Jun 2011 10:21:13 +0000 Ingo Weinzierl #90 Removed margins between data area border and curves.
Fri, 03 Jun 2011 07:20:39 +0000 Ingo Weinzierl Refactored the chart creation in the ChartInfoGenerators. Now, every chart is created by the XYChartGenerator again.
Fri, 03 Jun 2011 06:47:51 +0000 Ingo Weinzierl Charts are zoomed to a specified view if the attribute document for the chart creation contains an x and/or y range.
Thu, 02 Jun 2011 15:47:08 +0000 Sascha L. Teichmann Set collection ttl to 6 hours.
Wed, 01 Jun 2011 17:01:44 +0000 Sascha L. Teichmann Added parser for segments
Wed, 01 Jun 2011 09:57:22 +0000 Sascha L. Teichmann Fix crashes in back jump correction.
Wed, 01 Jun 2011 09:18:00 +0000 Ingo Weinzierl The matrix that is used to transform chart image coordinates into chart coordinates supports inverted x-axis now.
Wed, 01 Jun 2011 08:01:07 +0000 Ingo Weinzierl Introduced a new output generators for creating chart info documents.
Tue, 31 May 2011 14:56:18 +0000 Ingo Weinzierl Added support for the 'type' parameter of the collection's out() operation.
Tue, 31 May 2011 09:35:19 +0000 Sascha L. Teichmann Use an explicit reference km for interpolation now.
Mon, 30 May 2011 11:34:06 +0000 Sascha L. Teichmann Introduce a cache for the distance-info service
Mon, 30 May 2011 09:19:57 +0000 Sascha L. Teichmann flys/issue82: Only successful interpolations are named.
Fri, 27 May 2011 16:52:37 +0000 Sascha L. Teichmann Re-eanbled the calculation of the backjump correction.
Fri, 27 May 2011 10:09:46 +0000 Ingo Weinzierl Removed XML debug statement.
Fri, 27 May 2011 10:03:07 +0000 Ingo Weinzierl Moved the code part that skips themes to a better place. This let us paint empty charts with no themes at all.
Fri, 27 May 2011 09:47:13 +0000 Ingo Weinzierl We will no longer put deactivated themes into the chart.
Fri, 27 May 2011 08:46:26 +0000 Ingo Weinzierl Fixed the process of creating and storing the attribute of a collection.
Thu, 26 May 2011 16:54:16 +0000 Sascha L. Teichmann Make "Berechnungsart 4" work independent of flow direction. Commented out back jump correction temporarily.
Thu, 26 May 2011 15:55:48 +0000 Sascha L. Teichmann Generate fields for w/q input depend on flow direction.
Thu, 26 May 2011 14:27:06 +0000 Sascha L. Teichmann Take the flow direction into account.
Thu, 26 May 2011 09:41:57 +0000 Sascha L. Teichmann Round exploded values to a precision of 1e-6.
Wed, 25 May 2011 15:31:25 +0000 Sascha L. Teichmann WST value table: Qs are now stored in ranges for each column.
Tue, 24 May 2011 14:46:45 +0000 Sascha L. Teichmann First part of storing qs in ranges
Tue, 24 May 2011 13:24:24 +0000 Ingo Weinzierl Small bugfixes in the WQ selection state.
Tue, 24 May 2011 12:58:55 +0000 Ingo Weinzierl ISSUE-40 (part I/II) Write values that the user had former selected / inserted into DESCRIBE document to preselect such data in the UI.
Tue, 24 May 2011 12:40:06 +0000 Ingo Weinzierl Removed needless imports.
Tue, 24 May 2011 12:37:45 +0000 Ingo Weinzierl ISSUE-85 (part III/III) Use the given kilometer values for the waterlevel computation.
Tue, 24 May 2011 11:27:37 +0000 Ingo Weinzierl ISSUE-85 (part I/III) Added further fields for the location/range state.
Tue, 24 May 2011 11:23:57 +0000 Sascha L. Teichmann Moved WST value table cache key to a separate class.
Mon, 23 May 2011 22:33:37 +0000 Sascha L. Teichmann Introduce model to store q values of WST columns efficiently.
Mon, 23 May 2011 15:11:55 +0000 Ingo Weinzierl ISSUE-62 (part I/II) States are no longer filled with data - if a state needs user input, it needs to query the owner artifact.
Mon, 23 May 2011 14:32:17 +0000 Ingo Weinzierl Added a method to dump the artifacts state/data.
Mon, 23 May 2011 13:35:52 +0000 Sascha L. Teichmann flys/issue84: Forget to select wst kind.
Fri, 20 May 2011 10:41:46 +0000 Sascha L. Teichmann fix for flys/issue81: km weights were swapped
Fri, 20 May 2011 09:23:09 +0000 Ingo Weinzierl Tagged release 2.3.1 of flys-artifacts.
Fri, 20 May 2011 09:21:38 +0000 Ingo Weinzierl Prepared Changes for the upcoming release.
Fri, 20 May 2011 09:23:09 +0000 Ingo Weinzierl Tagged release 2.3.1 of flys-artifacts.
Fri, 20 May 2011 06:04:42 +0000 Hans Plum Notes to Release V 2.3.1
Thu, 19 May 2011 14:51:53 +0000 Sascha L. Teichmann Increment kms array size by one to take the end of range, too.
Thu, 19 May 2011 14:38:15 +0000 Sascha L. Teichmann Use unsharp km lookup (epsilon = 0.0001).
Thu, 19 May 2011 12:39:41 +0000 Ingo Weinzierl ISSUE-66 Fixed broken english subtitle template for longitudinal section charts.
Thu, 19 May 2011 12:33:12 +0000 Ingo Weinzierl The curve of a computed discharge curve has a human readable text now.
Thu, 19 May 2011 09:54:57 +0000 Sascha L. Teichmann Reintroduced titles for the "W for unausgeglichene Abfluesse".
Thu, 19 May 2011 09:45:29 +0000 Ingo Weinzierl Added names for discharge curves (at gauges).
Thu, 19 May 2011 09:31:47 +0000 Sascha L. Teichmann Removed dead code
Thu, 19 May 2011 09:24:08 +0000 Sascha L. Teichmann use correct kms and step width now now
Wed, 18 May 2011 17:37:06 +0000 Sascha L. Teichmann Use new logic to calculate "W für ungleichwertige Abfluesse". Not working yet.
Wed, 18 May 2011 10:59:38 +0000 Ingo Weinzierl Enabled the discharge longitudinal section to be exported as WST.
Wed, 18 May 2011 09:11:10 +0000 Sascha L. Teichmann flys/issue69: Connected calculation with the UI
Wed, 18 May 2011 09:02:50 +0000 Ingo Weinzierl W and Q curves in longitudinal section curves will now have names.
Wed, 18 May 2011 08:04:54 +0000 Ingo Weinzierl WSTs will now have a header that contains the names of the Ws or Qs that had been defined for the computation.
Tue, 17 May 2011 16:31:07 +0000 Ingo Weinzierl Implemented writer that creates WSTs and enabled the WaterlevelExporter to create those.
Tue, 17 May 2011 14:22:27 +0000 Ingo Weinzierl Added a new class that supports formatters for different types of data.
Tue, 17 May 2011 11:53:02 +0000 Ingo Weinzierl ISSUE-72 Repaired broken XPath expression in MainValuesService to extract start and end kilometer.
Tue, 17 May 2011 08:55:38 +0000 Sascha L. Teichmann Separated the WST table loading logic from the calculations.
Tue, 17 May 2011 07:39:33 +0000 Ingo Weinzierl Tagged RELEASE 2.3
Mon, 16 May 2011 10:34:59 +0000 Hans Plum Added NEWS File for collecting enduser-sepcific information for releases
Sun, 15 May 2011 21:08:41 +0000 Sascha L. Teichmann First step to calculate "W fuer ungleichwertige Abfluesse" correctly. flys/issue55
Sun, 15 May 2011 10:59:08 +0000 Sascha L. Teichmann Fix step to fix issue69: Do the right calculation
Fri, 13 May 2011 11:26:29 +0000 Ingo Weinzierl Prepared Changes for the upcoming release 2.3.
Fri, 13 May 2011 08:00:58 +0000 Ingo Weinzierl ISSUE-37 The river state wants to be rendered using a river_panel UI provider.
Thu, 12 May 2011 09:11:16 +0000 Ingo Weinzierl Charts are generated using the size defined in the incoming request document.
Wed, 11 May 2011 16:31:38 +0000 Ingo Weinzierl ISSUE-52 The longitudinal section charts will now always have the head of the river at the left side.
Wed, 11 May 2011 09:51:54 +0000 Sascha L. Teichmann MetaDataService: Make incoming XML symmetric to DistanceInfoService.
Tue, 10 May 2011 17:57:56 +0000 Ingo Weinzierl ISSUE-47 Adjusted the line color of W, Q and corrected W curves (temporarilly).
Tue, 10 May 2011 17:12:15 +0000 Ingo Weinzierl Display gridlines in charts.
Tue, 10 May 2011 16:10:01 +0000 Ingo Weinzierl ISSUE-53 Formatted number values of CSV exports.
Tue, 10 May 2011 15:28:30 +0000 Ingo Weinzierl Implemented the input validation of WQ in the adapted WQ panel.
Tue, 10 May 2011 13:18:03 +0000 Ingo Weinzierl The CSV exports will now have headers.
Tue, 10 May 2011 12:43:12 +0000 Sascha L. Teichmann Datacage: Added river parameter to meta data services.
Tue, 10 May 2011 12:19:17 +0000 Ingo Weinzierl Added subtitles to the available charts.
Tue, 10 May 2011 11:40:15 +0000 Ingo Weinzierl Added a method to Resources that returns translated compound messages.
Tue, 10 May 2011 10:26:26 +0000 Ingo Weinzierl Improved the OutGenerator interface to set a master artifact for the out generation.
Tue, 10 May 2011 07:40:06 +0000 Ingo Weinzierl Enabled the WINFO artifact to choose between W and Q mode in the adapted wq panel of the discharge longitudinal section computation.
Mon, 09 May 2011 19:54:24 +0000 Sascha L. Teichmann Datacage service: Cleanup served XML document.
Mon, 09 May 2011 13:47:15 +0000 Sascha L. Teichmann Datacage: Added forgotten columns of fixation WST to datcage template.
Mon, 09 May 2011 12:53:49 +0000 Ingo Weinzierl Enabled i18n support for charts.
Mon, 09 May 2011 09:55:47 +0000 Ingo Weinzierl Added a CSV exporter for the discharge longitudinal section computation.
Sat, 07 May 2011 21:34:02 +0000 Sascha L. Teichmann Back jump correction should work now for both flow directions.
Fri, 06 May 2011 16:49:31 +0000 Sascha L. Teichmann Added data cage configuration for 'Längsschnitt'.
Fri, 06 May 2011 14:19:27 +0000 Ingo Weinzierl Implemented methods to retrieve and compute the data used to create discharge longitudinal sections.
Thu, 05 May 2011 12:34:53 +0000 Ingo Weinzierl Small bugfix in the adapted WQ state and further i18n strings.
Thu, 05 May 2011 12:31:28 +0000 Ingo Weinzierl Changed the y-axis title of the computed discharge curve.
Thu, 05 May 2011 06:12:44 +0000 Ingo Weinzierl Improved the transition model and added states to enable the 'discharge longitudinal section' computation - NOTE: the work in this computation has not finished yet.
Thu, 05 May 2011 05:27:41 +0000 Ingo Weinzierl Use a default step width (100m) between two kilometers if no width is given.
Thu, 05 May 2011 04:52:47 +0000 Ingo Weinzierl Fixed a potential NullPointerException while creating a longitudinal section chart.
Wed, 04 May 2011 17:01:22 +0000 Sascha L. Teichmann fix flys/issue30
Wed, 04 May 2011 13:51:25 +0000 Sascha L. Teichmann 'berechnete Abflusskurve': generate ws from qs
Wed, 04 May 2011 10:10:11 +0000 Ingo Weinzierl Filled the discharge curve exporter (CSV) with code - now, it generates a CSV export with the computed discharge curve data.
Wed, 04 May 2011 08:24:50 +0000 Ingo Weinzierl Enabled the WINFO artifact to compute the data for discharge curves (computed) - ComputedDischargeCurveGenerator uses those values now to create the chart.
Wed, 04 May 2011 07:48:39 +0000 Ingo Weinzierl Improved the transition model and added classes to enable the WINFO artifact to create computed discharge curves - NOTE: each of the new classes is just a stub.
Tue, 03 May 2011 17:37:56 +0000 Ingo Weinzierl Added an exporter to export the computed data of a duration curve.
Tue, 03 May 2011 17:34:29 +0000 Ingo Weinzierl Modified a confusing debug statement.
Tue, 03 May 2011 16:36:21 +0000 Ingo Weinzierl Added an exporter (OutGenerator) for waterlevels which currently supports CSV exports.
Tue, 03 May 2011 16:26:35 +0000 Ingo Weinzierl Introduced an export output target on collection level that enables collections to be exported.
Tue, 03 May 2011 13:23:00 +0000 Ingo Weinzierl I18N Bugfix.
Tue, 03 May 2011 13:15:56 +0000 Ingo Weinzierl Added i18n strings for the location selection.
Tue, 03 May 2011 12:05:32 +0000 Ingo Weinzierl Enabled the WINFO artifact to create duration curves - new OutGenerator, added methods for data computation.
Tue, 03 May 2011 09:23:17 +0000 Sascha L. Teichmann visualize-transitions.xsl: State quoting was done wrong.
Mon, 02 May 2011 16:58:04 +0000 Ingo Weinzierl Enhanced the transition model to reach a state that creates duration curves.
Mon, 02 May 2011 16:50:58 +0000 Sascha L. Teichmann Flush/persist cache at end of program.
Mon, 02 May 2011 16:44:02 +0000 Ingo Weinzierl The DischargeCurveGenerator uses public methods of FLYSArtifact to retrieve all necessary information of the current settings.
Mon, 02 May 2011 16:28:57 +0000 Sascha L. Teichmann Moved expensive allocation of result arrays out of km loop.
Mon, 02 May 2011 15:17:04 +0000 Ingo Weinzierl Enabled the FLYSArtifact to handle an array of inserted WQ values (without given ranges).
Mon, 02 May 2011 13:42:02 +0000 Sascha L. Teichmann Repaired DischargeTables.getQForW()
Mon, 02 May 2011 12:47:10 +0000 Ingo Weinzierl Enabled the server to handle longitudinal section chart requests with inserted W data - Ws are transformed into Qs then.
Mon, 02 May 2011 12:41:24 +0000 Ingo Weinzierl Removed an unused parameter from DischargeTables.getQForW().
Mon, 02 May 2011 09:41:22 +0000 Ingo Weinzierl Ws and Qs of a longitudinal section chart are mapped to an own range axis now.
Sun, 01 May 2011 10:58:38 +0000 Sascha L. Teichmann Added caching support for the wst value tables.
Fri, 29 Apr 2011 16:56:37 +0000 Sascha L. Teichmann Added ehcache support.
Fri, 29 Apr 2011 15:10:44 +0000 Sascha L. Teichmann Added meta data service.
Fri, 29 Apr 2011 14:39:42 +0000 Sascha L. Teichmann Added meta service stub. TODO: Add meta data builder.
Fri, 29 Apr 2011 13:06:49 +0000 Ingo Weinzierl Bugfix: Changed the datastructure of the ThemeList (inner class of FLYSArtifactCollection) to store the theme of a chart in an ordered list -> Q curves of longitudinal section charts are now drawn.
Fri, 29 Apr 2011 10:13:24 +0000 Ingo Weinzierl Implemented the chart creation of a longitudinal section chart - W and Q facets.
Fri, 29 Apr 2011 10:02:59 +0000 Ingo Weinzierl Improved the calculation of the step width of ranges.
Fri, 29 Apr 2011 10:01:41 +0000 Ingo Weinzierl New method WQKms.size() to retrieve the number of elements in the data pool.
Fri, 29 Apr 2011 08:39:17 +0000 Sascha L. Teichmann WQKms model: Added a get() method which takes destination array as an argument.
Fri, 29 Apr 2011 08:28:44 +0000 Ingo Weinzierl Introduced GNU Trove to store WQKms values in a more performant data structure.
Fri, 29 Apr 2011 08:13:56 +0000 Ingo Weinzierl Added the name of the facet to the parameterlist of OutGenerator.doOut().
Fri, 29 Apr 2011 08:02:54 +0000 Ingo Weinzierl Added themes and mappings for the W and Q theme of a longitudinal section curve.
Fri, 29 Apr 2011 07:46:27 +0000 Ingo Weinzierl Added necessary methods to start the computation of waterlevel data.
Fri, 29 Apr 2011 07:27:05 +0000 Ingo Weinzierl Introduced a model class to store a set of triple data objects that consist of W, Q and Kms information.
Fri, 29 Apr 2011 07:22:25 +0000 Ingo Weinzierl Bugfix: Removed endless loop and a bug while iterating over Hibernate results.
Thu, 28 Apr 2011 12:54:11 +0000 Ingo Weinzierl Added an OutGenerator for creating longitudinal section curves.
Thu, 28 Apr 2011 12:23:40 +0000 Ingo Weinzierl Bugfix: Added missing <output-generators> section to the global configuration.
Thu, 28 Apr 2011 11:32:41 +0000 Ingo Weinzierl Added a further state that is reached if the waterlevel calculation mode has been chosen.
Thu, 28 Apr 2011 11:22:45 +0000 Ingo Weinzierl Added a new Transition to compare values.
Thu, 28 Apr 2011 11:20:11 +0000 Ingo Weinzierl Bugfixes: Adapted a broken method call of TransitionEngine.isStateReachable() and added the outputs of a current state to the DESCRIBE.
Thu, 28 Apr 2011 11:16:21 +0000 Ingo Weinzierl Bugfix: Added the missing init() method to a Transition and call it in the TransitionFactory after a Transition has been created.
Thu, 28 Apr 2011 11:13:06 +0000 Ingo Weinzierl Bugfix: The outputs of a Collection's attribute document are stored in an outputs node now instead of being stored toplevel in the document.
Thu, 28 Apr 2011 11:08:34 +0000 Ingo Weinzierl Throw an illegal argument exception in LocationDistanceSelect.validate() and WQSelect.validate() if no data has been inserted so far.
Thu, 28 Apr 2011 09:09:44 +0000 Sascha L. Teichmann Added XSL transformation do create Graphviz digraph out of conf.xml
Thu, 28 Apr 2011 08:14:20 +0000 Ingo Weinzierl The OutGenerator gets the theme of a facet while output creation.
Wed, 27 Apr 2011 14:42:52 +0000 Ingo Weinzierl Removed useless imports.
Wed, 27 Apr 2011 14:40:44 +0000 Ingo Weinzierl Added an abstract OutGenerator that should be the base class for all generators which create charts.
Wed, 27 Apr 2011 14:35:44 +0000 Ingo Weinzierl Improved the out() operation of a Collection - the OutGenerator gets to know about the facets and its theme.
Tue, 26 Apr 2011 13:29:18 +0000 Ingo Weinzierl The Attributes of a collection are written into its DESCRIBE now.
Tue, 26 Apr 2011 13:17:08 +0000 Ingo Weinzierl Initialized the facet2theme mappings configured in themes.xml and added a function to the ThemeFactory that retrieves a theme from FLYSContext based on its name.
Fri, 22 Apr 2011 15:49:35 +0000 Sascha L. Teichmann Corrected a silly c&p mistake.
Fri, 22 Apr 2011 09:57:27 +0000 Sascha L. Teichmann Implementation of the "Ruecksprungkorrektur" to be done in "W fuer angepassten Abflusslaengschnitt".
Thu, 21 Apr 2011 08:49:58 +0000 Ingo Weinzierl Removed debug code that has been commited by accident.
Thu, 21 Apr 2011 08:47:39 +0000 Ingo Weinzierl Added a first small theme configuration and code to read it.
Thu, 21 Apr 2011 08:44:41 +0000 Ingo Weinzierl Implementation of interfaces and its default implementations and a factory to work with themes.
Wed, 20 Apr 2011 14:26:51 +0000 Sascha L. Teichmann Implementation of "Abflusskurve/Abflusstafel" calculation.
Wed, 20 Apr 2011 13:13:19 +0000 Sascha L. Teichmann Added dependency to Apache Commons Math 2.2 (Apache License 2.0)
Wed, 20 Apr 2011 09:46:40 +0000 Sascha L. Teichmann Discharge table: Fix problem when sorting by q (copied w instead of q).
Wed, 20 Apr 2011 08:00:38 +0000 Ingo Weinzierl Fixed broken HQL statement.
Tue, 19 Apr 2011 17:43:39 +0000 Sascha L. Teichmann Implemented the "Wasserstand/Wasserspiegellagen" calculation.
Tue, 19 Apr 2011 17:37:21 +0000 Sascha L. Teichmann Discharge table: we need a getQForW() and not a getWForQ().
Tue, 19 Apr 2011 14:48:28 +0000 Sascha L. Teichmann Discharge tables: Sorting of q values was done wrong.
Tue, 19 Apr 2011 13:10:27 +0000 Ingo Weinzierl The list of annotations returned by the AnnotationFactory is ordered by its range.
Tue, 19 Apr 2011 12:33:39 +0000 Ingo Weinzierl Added a service that returns the MainValues of a Gauge based on a river name and a stationing.
Tue, 19 Apr 2011 12:31:07 +0000 Ingo Weinzierl Added a factory that returns MainValues.
Tue, 19 Apr 2011 11:05:27 +0000 Sascha L. Teichmann Discharge table: Added static method getWForQ() to interpolate a w value for a given q value based on a given discharge table.
Tue, 19 Apr 2011 10:32:31 +0000 Sascha L. Teichmann Discharge tables: Added convenience constructors/methods to ease the access to the master discharge table of a gauge.
Mon, 18 Apr 2011 16:01:23 +0000 Sascha L. Teichmann Moved the query complexity of creating a w/q value table into view
Mon, 18 Apr 2011 14:40:35 +0000 Sascha L. Teichmann Fetches w/q value tables from the backend.
Mon, 18 Apr 2011 13:23:12 +0000 Ingo Weinzierl Changed the error key that is written to the result document of the feed operation.
Mon, 18 Apr 2011 13:21:52 +0000 Ingo Weinzierl The inserted river is validated in the feed operation().
Mon, 18 Apr 2011 13:00:57 +0000 Ingo Weinzierl The calculation method is validated in the feed() operation.
Mon, 18 Apr 2011 12:36:08 +0000 Ingo Weinzierl The inserted ranges (distance and WQ ranges) are validated in the feed() operation.
Mon, 18 Apr 2011 09:34:18 +0000 Ingo Weinzierl Removed testing code that has been comitted by accident in the last revision.
Mon, 18 Apr 2011 07:39:17 +0000 Ingo Weinzierl The getGauge() method of the FLYSArtifact returns the first gauge based on the given stationing now.
Fri, 15 Apr 2011 13:47:10 +0000 Ingo Weinzierl The WQ state fills the DESCRIBE with default values for W and Q.
Fri, 15 Apr 2011 13:46:22 +0000 Ingo Weinzierl Added a WstFactory to return Wst objects.
Fri, 15 Apr 2011 13:37:51 +0000 Ingo Weinzierl FLYSArtifact provides methods to retrieve the real River, Gauge objects.
Fri, 15 Apr 2011 10:10:37 +0000 Ingo Weinzierl Bugfix: repaired broken imports of the session holder.
Fri, 15 Apr 2011 09:52:37 +0000 Ingo Weinzierl Removed the SessionHolder and adapted imports.
Thu, 14 Apr 2011 13:45:50 +0000 Sascha L. Teichmann Acquire/release sessions in services to avoid db connection leaks.
Thu, 14 Apr 2011 13:36:06 +0000 Ingo Weinzierl The location/distance state now writes default values into DESCRIBE.
Thu, 14 Apr 2011 13:26:29 +0000 Ingo Weinzierl Added a new function to RiverFactory that retrieves a River object based on a given river name.
Thu, 14 Apr 2011 13:15:16 +0000 Sascha L. Teichmann Backend access: Static methods are using the SessionHolder, too.
Thu, 14 Apr 2011 13:11:12 +0000 Ingo Weinzierl Finalized the SessionCallContextListener and registered it as CallContext.Listener in the configuration.
Thu, 14 Apr 2011 12:59:21 +0000 Ingo Weinzierl Bugfix: Call correct method to retrieve and initialize an instance of SessionFactoryProvider.
Thu, 14 Apr 2011 12:08:47 +0000 Sascha L. Teichmann Added a session holder to hold hibernate sessions.
Thu, 14 Apr 2011 11:18:28 +0000 Ingo Weinzierl Added an Implementation of CallContext.Listener to open/close Hibernate Sessions for each request.
Thu, 14 Apr 2011 08:32:18 +0000 Ingo Weinzierl Modified the states' describe() method - related to the last commit.
Thu, 14 Apr 2011 08:23:15 +0000 Ingo Weinzierl Removed the state to explicitly select a gauge.
Wed, 13 Apr 2011 08:31:20 +0000 Ingo Weinzierl Bugfix: Repaired the dynamic UI part of the RiverSelect state in DESCRIBE.
Tue, 12 Apr 2011 13:42:14 +0000 Ingo Weinzierl Write the name of an artifact into the DESCRIBE document.
Tue, 12 Apr 2011 07:49:36 +0000 Ingo Weinzierl Bugfix: States are filled with data before they describe themself.
Mon, 11 Apr 2011 12:54:03 +0000 Ingo Weinzierl Implemented a service that retrieves distance information for a specific river.
Wed, 06 Apr 2011 10:01:49 +0000 Ingo Weinzierl The FLYSArtifactCollection overrides out() and uses OutGenerators to create output for this operation.
Wed, 06 Apr 2011 09:56:38 +0000 Ingo Weinzierl Added a DischargeCurveGenerator that creates discharge curves.
Wed, 06 Apr 2011 09:53:14 +0000 Ingo Weinzierl Changed the visibility of getData() method of FLYSArtifacts.
Sun, 03 Apr 2011 10:55:16 +0000 Sascha L. Teichmann Removed trailing whitespace.
Sun, 03 Apr 2011 10:53:14 +0000 Sascha L. Teichmann Make project compilable again.
Thu, 31 Mar 2011 10:56:08 +0000 Ingo Weinzierl Added code to parse the configured OutGenerators in the global configuration and to save a map of such in the FLYSContext.
Thu, 31 Mar 2011 10:54:07 +0000 Ingo Weinzierl Added an OutGenerator interface that might be used to generator collected outputs of a set of artifacts.
Wed, 30 Mar 2011 16:00:51 +0000 Ingo Weinzierl Removed the Backend reference from FLYSArtifactCollection.
Wed, 30 Mar 2011 15:21:12 +0000 Ingo Weinzierl Enhanced the output mode for discharge curves with three facets.
Wed, 30 Mar 2011 13:47:02 +0000 Ingo Weinzierl Tagged RELEASE 0.1 of FLYS Artifacts.
Wed, 30 Mar 2011 08:22:30 +0000 Ingo Weinzierl Renamed an output mode in the WINFO artifact configuration.
Tue, 29 Mar 2011 13:57:25 +0000 Ingo Weinzierl Changed a german string in the resource bundle.
Tue, 29 Mar 2011 09:54:06 +0000 Ingo Weinzierl Adapted the available calculation modes of WINFO and its order in the DESCRIBE document.
Mon, 28 Mar 2011 16:58:17 +0000 Ingo Weinzierl Added the hash code of an artifact to the artifact part of the collection's DESCRIBE document.
Mon, 28 Mar 2011 16:36:13 +0000 Ingo Weinzierl Changed the background color of discharge curves to white.
Mon, 28 Mar 2011 15:21:27 +0000 Sascha L. Teichmann DischargeTables: Cache the scale, too. Otherwise two calls to getValues() with different arguments will result in the same output.
Mon, 28 Mar 2011 14:33:36 +0000 Ingo Weinzierl The out() operation of the WINFO artifact draws discharge tables for gauges specified by the user.
less more | (0) -240 tip
http://dive4elements.wald.intevation.org