| Tue, 21 Jun 2011 14:33:00 +0000 |
Ingo Weinzierl |
Put the time-to-live of the collection into its DESCRIBE document.
|
| Mon, 20 Jun 2011 14:36:42 +0000 |
Sascha L. Teichmann |
Configured states to generate report facets.
|
| Mon, 20 Jun 2011 14:14:20 +0000 |
Sascha L. Teichmann |
Generate report facets if there are problems with the calculations.
|
| Mon, 20 Jun 2011 13:47:59 +0000 |
Sascha L. Teichmann |
Added generator and facet for error reports.
|
| Mon, 20 Jun 2011 12:32:32 +0000 |
Sascha L. Teichmann |
New model to transport data and error reports of calculations.
|
| Sat, 18 Jun 2011 20:20:34 +0000 |
Sascha L. Teichmann |
Added calculation "am Pegel" version to the "Wasserspiegellage" calculation.
|
| Sat, 18 Jun 2011 18:19:34 +0000 |
Sascha L. Teichmann |
Removed dead code.
|
| Sat, 18 Jun 2011 17:03:17 +0000 |
Sascha L. Teichmann |
Only generate facets when needed.
|
| Fri, 17 Jun 2011 16:17:03 +0000 |
Sascha L. Teichmann |
Merged revisions 2127-2133,2136-2137,2140,2143-2144,2146,2150-2151,2153-2154 via svnmerge from
|
| Fri, 17 Jun 2011 13:00:54 +0000 |
Ingo Weinzierl |
Added a parameter 'wq_free' that determines that mode of calculation 1 (specifies if the calculation is bound to a gauge or not).
|
| Fri, 17 Jun 2011 12:38:41 +0000 |
Ingo Weinzierl |
DischargeLongitudinalSectionCurve will have corrected W facets now.
|
| Wed, 15 Jun 2011 15:28:54 +0000 |
Ingo Weinzierl |
Merged with trunk and introduced hashing of computed values.
facets-slt
|
| Tue, 14 Jun 2011 16:26:59 +0000 |
Sascha L. Teichmann |
DistanceInfoService: Got rid of namespace in result document.
|
| Tue, 14 Jun 2011 15:34:27 +0000 |
Ingo Weinzierl |
#77 The curves in a duration chart will have names now.
|
| Tue, 14 Jun 2011 13:54:19 +0000 |
Ingo Weinzierl |
The min/max W/Q ranges in the panel for calculation4 are written into the DESCRIBE.
|
| Tue, 14 Jun 2011 13:53:25 +0000 |
Sascha L. Teichmann |
Write top 'Oberkante' and bottom 'Unterkante' to out going XML if they exist.
|
| Tue, 14 Jun 2011 10:38:00 +0000 |
Ingo Weinzierl |
The state that is used to enter locations writes the river's range into the DESCRIBE now.
|
| Fri, 10 Jun 2011 15:59:47 +0000 |
Sascha L. Teichmann |
Added error reporting to 'Wasserspiegellage' calculation.
|
| Fri, 10 Jun 2011 14:24:15 +0000 |
Sascha L. Teichmann |
Added error reporting to 'Abflusskurve' calculation.
|
| Fri, 10 Jun 2011 12:38:08 +0000 |
Sascha L. Teichmann |
Added error reporting to 'Dauerzahlen' calculation.
|
| Fri, 10 Jun 2011 10:10:04 +0000 |
Sascha L. Teichmann |
Added methods to remove NaN values.
|
| Fri, 10 Jun 2011 09:19:27 +0000 |
Sascha L. Teichmann |
Added calculation base class to collect the problems during the calculations. Adjusted calculation 4 to use the mechanism.
|
| Thu, 09 Jun 2011 10:48:13 +0000 |
Ingo Weinzierl |
Changed the zoom process - the values in the chart request document are percentual values that apply to every axis.
|
| Thu, 09 Jun 2011 10:31:22 +0000 |
Ingo Weinzierl |
Corrected axes/datasets mappings.
|
| Wed, 08 Jun 2011 19:11:18 +0000 |
Sascha L. Teichmann |
Berechnung 4: Determine the gauges by their station position. This hopefully fixes segment assignment problems.
|
| Wed, 08 Jun 2011 18:50:40 +0000 |
Sascha L. Teichmann |
Berechnung 4: Added more debug output
|
| Wed, 08 Jun 2011 13:57:43 +0000 |
Ingo Weinzierl |
#103 PART 1: The numbers which are written into the static DESCRIBE part are i18n formatted now.
|
| Wed, 08 Jun 2011 13:32:56 +0000 |
Ingo Weinzierl |
#93 Changed the name of calculation type 4.
|
| Wed, 08 Jun 2011 13:03:21 +0000 |
Ingo Weinzierl |
Made the chart range determination more robust against NaN values.
|
| Wed, 08 Jun 2011 12:35:44 +0000 |
Ingo Weinzierl |
Set the second y axis to axis position 1 (starts at 0).
|
| Wed, 08 Jun 2011 10:25:39 +0000 |
Sascha L. Teichmann |
s@m³/s@m\\u00b3/s@
|
| Wed, 08 Jun 2011 10:21:36 +0000 |
Sascha L. Teichmann |
s@m³/s@m\u00b3/s@
|
| Wed, 08 Jun 2011 10:19:23 +0000 |
Sascha L. Teichmann |
Only generate an axis element if a axis really exists.
|
| Tue, 07 Jun 2011 21:01:09 +0000 |
Sascha L. Teichmann |
BackJumpCorrector: Simpified array swapping.
|
| Tue, 07 Jun 2011 15:05:12 +0000 |
Sascha L. Teichmann |
Use java.util.List instead of java.util.Vector. Removed superfluous imports.
|
| Tue, 07 Jun 2011 14:28:44 +0000 |
Sascha L. Teichmann |
code clean up in states
|
| Tue, 07 Jun 2011 13:15:02 +0000 |
Ingo Weinzierl |
The ChartInfoGenerator appends axes range information to the document now.
|
| Tue, 07 Jun 2011 11:43:30 +0000 |
Sascha L. Teichmann |
If Artifact.feed() fails do not store invalid values in database.
|
| Mon, 06 Jun 2011 11:34:44 +0000 |
Sascha L. Teichmann |
Removed asymmetrical "- 1" from width calculation.
|
| Sun, 05 Jun 2011 20:47:51 +0000 |
Sascha L. Teichmann |
Berechnung 4: Fixed problem when more than one value per segment are given.
|
| Sun, 05 Jun 2011 18:24:46 +0000 |
Sascha L. Teichmann |
Refactored version of "Berechnung 4"
|
| Fri, 03 Jun 2011 10:21:13 +0000 |
Ingo Weinzierl |
#90 Removed margins between data area border and curves.
|
| Fri, 03 Jun 2011 07:20:39 +0000 |
Ingo Weinzierl |
Refactored the chart creation in the ChartInfoGenerators. Now, every chart is created by the XYChartGenerator again.
|
| Fri, 03 Jun 2011 06:47:51 +0000 |
Ingo Weinzierl |
Charts are zoomed to a specified view if the attribute document for the chart creation contains an x and/or y range.
|
| Thu, 02 Jun 2011 15:47:08 +0000 |
Sascha L. Teichmann |
Set collection ttl to 6 hours.
|
| Wed, 01 Jun 2011 17:01:44 +0000 |
Sascha L. Teichmann |
Added parser for segments
|
| Wed, 01 Jun 2011 09:57:22 +0000 |
Sascha L. Teichmann |
Fix crashes in back jump correction.
|
| Wed, 01 Jun 2011 09:18:00 +0000 |
Ingo Weinzierl |
The matrix that is used to transform chart image coordinates into chart coordinates supports inverted x-axis now.
|
| Wed, 01 Jun 2011 08:01:07 +0000 |
Ingo Weinzierl |
Introduced a new output generators for creating chart info documents.
|
| Tue, 31 May 2011 14:56:18 +0000 |
Ingo Weinzierl |
Added support for the 'type' parameter of the collection's out() operation.
|
| Tue, 31 May 2011 09:35:19 +0000 |
Sascha L. Teichmann |
Use an explicit reference km for interpolation now.
|
| Mon, 30 May 2011 11:34:06 +0000 |
Sascha L. Teichmann |
Introduce a cache for the distance-info service
|
| Mon, 30 May 2011 09:19:57 +0000 |
Sascha L. Teichmann |
flys/issue82: Only successful interpolations are named.
|
| Fri, 27 May 2011 16:52:37 +0000 |
Sascha L. Teichmann |
Re-eanbled the calculation of the backjump correction.
|
| Fri, 27 May 2011 10:09:46 +0000 |
Ingo Weinzierl |
Removed XML debug statement.
|
| Fri, 27 May 2011 10:03:07 +0000 |
Ingo Weinzierl |
Moved the code part that skips themes to a better place. This let us paint empty charts with no themes at all.
|
| Fri, 27 May 2011 09:47:13 +0000 |
Ingo Weinzierl |
We will no longer put deactivated themes into the chart.
|
| Fri, 27 May 2011 08:46:26 +0000 |
Ingo Weinzierl |
Fixed the process of creating and storing the attribute of a collection.
|
| Thu, 26 May 2011 16:54:16 +0000 |
Sascha L. Teichmann |
Make "Berechnungsart 4" work independent of flow direction. Commented out back jump correction temporarily.
|
| Thu, 26 May 2011 15:55:48 +0000 |
Sascha L. Teichmann |
Generate fields for w/q input depend on flow direction.
|
| Thu, 26 May 2011 14:27:06 +0000 |
Sascha L. Teichmann |
Take the flow direction into account.
|
| Thu, 26 May 2011 09:41:57 +0000 |
Sascha L. Teichmann |
Round exploded values to a precision of 1e-6.
|
| Wed, 25 May 2011 15:31:25 +0000 |
Sascha L. Teichmann |
WST value table: Qs are now stored in ranges for each column.
|
| Tue, 24 May 2011 14:46:45 +0000 |
Sascha L. Teichmann |
First part of storing qs in ranges
|
| Tue, 24 May 2011 13:24:24 +0000 |
Ingo Weinzierl |
Small bugfixes in the WQ selection state.
|
| Tue, 24 May 2011 12:58:55 +0000 |
Ingo Weinzierl |
ISSUE-40 (part I/II) Write values that the user had former selected / inserted into DESCRIBE document to preselect such data in the UI.
|
| Tue, 24 May 2011 12:40:06 +0000 |
Ingo Weinzierl |
Removed needless imports.
|
| Tue, 24 May 2011 12:37:45 +0000 |
Ingo Weinzierl |
ISSUE-85 (part III/III) Use the given kilometer values for the waterlevel computation.
|
| Tue, 24 May 2011 11:27:37 +0000 |
Ingo Weinzierl |
ISSUE-85 (part I/III) Added further fields for the location/range state.
|
| Tue, 24 May 2011 11:23:57 +0000 |
Sascha L. Teichmann |
Moved WST value table cache key to a separate class.
|
| Mon, 23 May 2011 22:33:37 +0000 |
Sascha L. Teichmann |
Introduce model to store q values of WST columns efficiently.
|
| Mon, 23 May 2011 15:11:55 +0000 |
Ingo Weinzierl |
ISSUE-62 (part I/II) States are no longer filled with data - if a state needs user input, it needs to query the owner artifact.
|
| Mon, 23 May 2011 14:32:17 +0000 |
Ingo Weinzierl |
Added a method to dump the artifacts state/data.
|
| Mon, 23 May 2011 13:35:52 +0000 |
Sascha L. Teichmann |
flys/issue84: Forget to select wst kind.
|
| Fri, 20 May 2011 10:41:46 +0000 |
Sascha L. Teichmann |
fix for flys/issue81: km weights were swapped
|
| Fri, 20 May 2011 09:23:09 +0000 |
Ingo Weinzierl |
Tagged release 2.3.1 of flys-artifacts.
|
| Fri, 20 May 2011 09:21:38 +0000 |
Ingo Weinzierl |
Prepared Changes for the upcoming release.
|
| Fri, 20 May 2011 09:23:09 +0000 |
Ingo Weinzierl |
Tagged release 2.3.1 of flys-artifacts.
|
| Fri, 20 May 2011 06:04:42 +0000 |
Hans Plum |
Notes to Release V 2.3.1
|
| Thu, 19 May 2011 14:51:53 +0000 |
Sascha L. Teichmann |
Increment kms array size by one to take the end of range, too.
|
| Thu, 19 May 2011 14:38:15 +0000 |
Sascha L. Teichmann |
Use unsharp km lookup (epsilon = 0.0001).
|
| Thu, 19 May 2011 12:39:41 +0000 |
Ingo Weinzierl |
ISSUE-66 Fixed broken english subtitle template for longitudinal section charts.
|
| Thu, 19 May 2011 12:33:12 +0000 |
Ingo Weinzierl |
The curve of a computed discharge curve has a human readable text now.
|
| Thu, 19 May 2011 09:54:57 +0000 |
Sascha L. Teichmann |
Reintroduced titles for the "W for unausgeglichene Abfluesse".
|
| Thu, 19 May 2011 09:45:29 +0000 |
Ingo Weinzierl |
Added names for discharge curves (at gauges).
|
| Thu, 19 May 2011 09:31:47 +0000 |
Sascha L. Teichmann |
Removed dead code
|
| Thu, 19 May 2011 09:24:08 +0000 |
Sascha L. Teichmann |
use correct kms and step width now now
|
| Wed, 18 May 2011 17:37:06 +0000 |
Sascha L. Teichmann |
Use new logic to calculate "W für ungleichwertige Abfluesse". Not working yet.
|
| Wed, 18 May 2011 10:59:38 +0000 |
Ingo Weinzierl |
Enabled the discharge longitudinal section to be exported as WST.
|
| Wed, 18 May 2011 09:11:10 +0000 |
Sascha L. Teichmann |
flys/issue69: Connected calculation with the UI
|
| Wed, 18 May 2011 09:02:50 +0000 |
Ingo Weinzierl |
W and Q curves in longitudinal section curves will now have names.
|
| Wed, 18 May 2011 08:04:54 +0000 |
Ingo Weinzierl |
WSTs will now have a header that contains the names of the Ws or Qs that had been defined for the computation.
|
| Tue, 17 May 2011 16:31:07 +0000 |
Ingo Weinzierl |
Implemented writer that creates WSTs and enabled the WaterlevelExporter to create those.
|
| Tue, 17 May 2011 14:22:27 +0000 |
Ingo Weinzierl |
Added a new class that supports formatters for different types of data.
|
| Tue, 17 May 2011 11:53:02 +0000 |
Ingo Weinzierl |
ISSUE-72 Repaired broken XPath expression in MainValuesService to extract start and end kilometer.
|
| Tue, 17 May 2011 08:55:38 +0000 |
Sascha L. Teichmann |
Separated the WST table loading logic from the calculations.
|
