| Thu, 25 Apr 2013 08:24:54 +0200 |
Felix Wolfsteller |
Remove obsolete (duplicate) macro and its use.
before-dive4elements-move
|
| Wed, 24 Apr 2013 09:03:26 +0200 |
Felix Wolfsteller |
For base-data from DC, use staticwqkms factory (will spawn w and q facets).
|
| Tue, 23 Apr 2013 18:47:57 +0200 |
Andre Heinecke |
Fix other buildings.
|
| Fri, 19 Apr 2013 09:22:44 +0200 |
Felix Wolfsteller |
issue1276: Re-enable fixation autorecommend at discharge_curves.
|
| Thu, 18 Apr 2013 15:01:43 +0200 |
Raimund Renkert |
Removed macro from bed height difference datacage config.
|
| Thu, 18 Apr 2013 14:17:10 +0200 |
Raimund Renkert |
Datacage config and out generator for morphologic width.
|
| Thu, 18 Apr 2013 12:38:55 +0200 |
Andre Heinecke |
Remove OSM Intevation.de background layer from datacage :(
|
| Thu, 18 Apr 2013 12:37:55 +0200 |
Andre Heinecke |
Add hydroboundaries where sectie and sobek is null
|
| Thu, 18 Apr 2013 11:51:53 +0200 |
Raimund Renkert |
Added new macro for deltaW ls and removed the old one. Use the new macro in bed
|
| Wed, 17 Apr 2013 18:19:19 +0200 |
Tom Gottfried |
remove prefixed directory names from descriptions in data cage
|
| Fri, 12 Apr 2013 14:51:29 +0200 |
Raimund Renkert |
Added old calculation and additional data to dc config for bed difference charts.
|
| Fri, 12 Apr 2013 09:42:20 +0200 |
Raimund Renkert |
Cosmetics.
|
| Fri, 12 Apr 2013 09:41:56 +0200 |
Raimund Renkert |
Added basedata and old calculations to middle bedheight dc and added new macros.
|
| Wed, 10 Apr 2013 15:04:56 +0200 |
Raimund Renkert |
Added old calculations to datacage 'M-INFO Sedimentfracht'.
|
| Wed, 10 Apr 2013 10:25:33 +0200 |
Andre Heinecke |
Flys Issue 759 write longer strings and explicitly break the lines
|
| Tue, 09 Apr 2013 19:39:39 +0200 |
Andre Heinecke |
Update dem info string
|
| Tue, 09 Apr 2013 17:59:14 +0200 |
Andre Heinecke |
Move floodplain into its own directory and reindent
|
| Tue, 09 Apr 2013 16:31:05 +0200 |
Andre Heinecke |
Remove uneccessary complication fixpoints are always fixpoints
|
| Tue, 09 Apr 2013 16:03:01 +0200 |
Andre Heinecke |
Uppercase the name if the name is festpunkte
|
| Mon, 08 Apr 2013 17:40:20 +0200 |
Andre Heinecke |
It's hws_kind not kws_kind
|
| Mon, 08 Apr 2013 16:46:38 +0200 |
Andre Heinecke |
Do not show old calculations in hws datacage selection
|
| Mon, 08 Apr 2013 16:45:38 +0200 |
Andre Heinecke |
When the HWS parameter is given only show the inline hws
|
| Mon, 08 Apr 2013 14:52:59 +0200 |
Raimund Renkert |
Added new elements to M-INFO datacage.
|
| Fri, 05 Apr 2013 16:48:07 +0200 |
Andre Heinecke |
Move floodmap folders to the top folder similar to the map module
|
| Fri, 05 Apr 2013 14:55:43 +0200 |
Raimund Renkert |
Put the correct annotations into flowvelocity dc and fix measurement name.
|
| Thu, 04 Apr 2013 16:07:55 +0200 |
Andre Heinecke |
Use dc:replace to remove static "Fixierungen/" prefix in fixation description
|
| Thu, 04 Apr 2013 16:07:02 +0200 |
Andre Heinecke |
Order Fixations by their description
|
| Thu, 04 Apr 2013 10:58:16 +0200 |
Raimund Renkert |
merged again.
|
| Thu, 04 Apr 2013 10:56:26 +0200 |
Raimund Renkert |
merged.
|
| Thu, 04 Apr 2013 10:55:46 +0200 |
Raimund Renkert |
Added bed quality facets to flow velocity datacage.
|
| Thu, 04 Apr 2013 10:56:12 +0200 |
Andre Heinecke |
Fix distinction for kilometrage.
|
| Thu, 04 Apr 2013 10:40:01 +0200 |
Andre Heinecke |
Add Floodmarks and all specified WMS services to datacage
|
| Wed, 03 Apr 2013 15:31:04 +0200 |
Andre Heinecke |
Add uesg as specified to the datacage
|
| Wed, 03 Apr 2013 15:30:45 +0200 |
Andre Heinecke |
Remove useless km_exists statements
|
| Tue, 02 Apr 2013 13:02:12 +0200 |
Tom Gottfried |
Use left join on time intervals as they can be NULL
|
| Mon, 01 Apr 2013 13:36:14 +0200 |
Sascha L. Teichmann |
Replaced usage of old <dc:for-each filter="..."/> by <dc:filter expr="..."><dc:if test="dc:has-result()">.
|
| Fri, 29 Mar 2013 14:25:36 +0100 |
Sascha L. Teichmann |
Applied contrib/inline-dc-attribute.xsl und fix idention. Need testing
|
| Fri, 29 Mar 2013 11:07:24 +0100 |
Sascha L. Teichmann |
Datacage: Rename <dc:elements> to <dc:for-each>. We should have done this much earlier.
|
| Thu, 28 Mar 2013 17:14:16 +0100 |
Andre Heinecke |
Add Pegelonline-Pegelpunkte layer instead of gauge_locations
|
| Thu, 28 Mar 2013 17:13:53 +0100 |
Andre Heinecke |
Properly handle hydr_boundaries and hydr_boundaries_poly in datacage
|
| Thu, 28 Mar 2013 12:39:14 +0100 |
Andre Heinecke |
Add support for multiple floodplains and add them to the datacage accordingly
|
| Wed, 27 Mar 2013 18:31:31 +0100 |
Andre Heinecke |
Add proper handling of multiple river_axes for datacage and rivermapfile
|
| Wed, 27 Mar 2013 16:16:49 +0100 |
Andre Heinecke |
Move km and rename to kilometrage
|
| Wed, 27 Mar 2013 16:12:09 +0100 |
Andre Heinecke |
Move fixpoints to their correct location in datacage
|
| Wed, 27 Mar 2013 15:36:02 +0100 |
Andre Heinecke |
Do not use != in sql statement
|
| Wed, 27 Mar 2013 15:27:25 +0100 |
Andre Heinecke |
Restructure datacage to have a route_data folder
|
| Wed, 27 Mar 2013 11:29:59 +0100 |
Andre Heinecke |
Add externalwms for Catchments to datacage config
|
| Tue, 26 Mar 2013 18:30:44 +0100 |
Andre Heinecke |
Move background out of rastermap folder.
|
| Tue, 26 Mar 2013 17:31:55 +0100 |
Andre Heinecke |
Add Jetties to floodmap
|
| Tue, 26 Mar 2013 12:07:16 +0100 |
Andre Heinecke |
Add buildings of kind 0 to data cage
|
| Mon, 25 Mar 2013 15:38:54 +0100 |
Andre Heinecke |
Remove river_name and map elements to reduce datacage level depth
|
| Mon, 25 Mar 2013 15:02:04 +0100 |
Andre Heinecke |
Add buildings with kinds to datacage
|
| Fri, 22 Mar 2013 09:05:47 +0100 |
Felix Wolfsteller |
meta-data.xml: Recommend main values for historic. w/q diagram.
|
| Thu, 21 Mar 2013 16:52:07 +0100 |
Andre Heinecke |
Add HWS Lines and HWS Points folder structures to the datacage
|
| Wed, 20 Mar 2013 16:37:02 +0100 |
Andre Heinecke |
Add HWSLines and HWSPoints to datacage for the map
|
| Wed, 20 Mar 2013 16:35:47 +0100 |
Andre Heinecke |
Remove commented code that could be copied from below.
|
| Fri, 15 Mar 2013 19:41:13 +0100 |
Sascha L. Teichmann |
Move hws out of data cage flood map.
|
| Thu, 14 Mar 2013 17:25:00 +0100 |
Raimund Renkert |
Added new states and transitions to UESK calculation and adjusted states and UI.
|
| Tue, 12 Mar 2013 08:23:55 +0100 |
Raimund Renkert |
Fixed dem select statement in meta-data.xml.
|
| Fri, 08 Mar 2013 18:15:48 +0100 |
Andre Heinecke |
SCHEME CHANGE: dgm now uses time intervals and ranges
|
| Mon, 04 Mar 2013 11:44:11 +0100 |
Raimund Renkert |
Fixed datacage to be oracle compatible.
2.9.10
|
| Thu, 28 Feb 2013 17:12:46 +0100 |
Raimund Renkert |
Fixed typo in meta-data.xml for inline datacage.
|
| Thu, 28 Feb 2013 12:47:24 +0100 |
Raimund Renkert |
Merged with 'dc-km-filter-rr' branch.
|
| Thu, 28 Feb 2013 11:48:17 +0100 |
Andre Heinecke |
SCHEME CHANGE: Merge branch dami into default.
|
| Thu, 28 Feb 2013 11:06:20 +0100 |
Felix Wolfsteller |
Fix flys/issue1144: Re-enable annotations in longitudinal_sections.
|
| Mon, 25 Feb 2013 15:31:40 +0100 |
Andre Heinecke |
Remove hws, lines and catchments from meta-data.xml and add hwslines
dami
|
| Tue, 19 Feb 2013 10:46:41 +0100 |
Raimund Renkert |
Added km filter to dc-config.
dc-km-filter-rr
|
| Wed, 30 Jan 2013 15:54:07 +0100 |
Felix Wolfsteller |
[branch dc-km-filter] meta-data.xml: Use global vars and art. data for wst-km-filter.
dc-km-filter
|
| Tue, 29 Jan 2013 15:05:37 +0100 |
Felix Wolfsteller |
[branch: dc-km-filter] meta-data.xml: Filter wst columns by range.
dc-km-filter
|
| Mon, 28 Jan 2013 17:31:49 +0100 |
Felix Wolfsteller |
meta-data.xml: Access wst_ranges and provide range is info-element.
|
| Mon, 28 Jan 2013 17:16:00 +0100 |
Felix Wolfsteller |
meta-data.xml: Replace wst_columns queries by macro call.
|
| Mon, 28 Jan 2013 14:27:37 +0100 |
Felix Wolfsteller |
meta-data.xml: Fully qualify a wst-columns query.
|
| Fri, 30 Nov 2012 12:03:12 +0100 |
Felix Wolfsteller |
meta-data.xml: Moved 'map' definitions to more appropriate place.
|
| Fri, 30 Nov 2012 12:02:38 +0100 |
Felix Wolfsteller |
meta-data.xml: Resolved discharge_longitudinal_section definitions and use
|
| Fri, 30 Nov 2012 12:01:51 +0100 |
Felix Wolfsteller |
meta-data.xml: Moved duration-curve definitions into more appropriate places.
|
| Fri, 30 Nov 2012 12:00:58 +0100 |
Felix Wolfsteller |
meta-data.xml: Added 'prototype-macro for longitudinal_sections.
|
| Thu, 15 Nov 2012 16:29:31 +0100 |
Björn Ricks |
Load bedheigt single values via the datacage for a bedheight middle output
|
| Thu, 08 Nov 2012 16:52:41 +0100 |
Felix Wolfsteller |
meta-data.xml: Add annotations and flow velocity measurements to the DC.
|
| Wed, 07 Nov 2012 15:58:03 +0100 |
Björn Ricks |
Add datacage for minfo and longitudinal_section.w from fixanalysis
|
| Wed, 07 Nov 2012 13:40:00 +0100 |
Felix Wolfsteller |
Merged backouts.
|
| Wed, 07 Nov 2012 12:28:50 +0100 |
Felix Wolfsteller |
Backed out changeset e8a4d2fd25cc
|
| Wed, 07 Nov 2012 12:23:41 +0100 |
Felix Wolfsteller |
Backed out changeset e8a4d2fd25cc
|
| Wed, 07 Nov 2012 09:47:44 +0100 |
Felix Wolfsteller |
Merged.
|
| Wed, 07 Nov 2012 09:42:59 +0100 |
Felix Wolfsteller |
meta-data.xml: Force-recommend annotations for sedimentload_ls outs.
|
| Mon, 05 Nov 2012 09:20:33 +0100 |
Felix Wolfsteller |
meta-data.xml: Force-recommend annotations for flow-velocity-outs.
|
| Fri, 02 Nov 2012 15:52:45 +0100 |
Björn Ricks |
Add datacage logic for MINFO bed differences
|
| Wed, 17 Oct 2012 22:29:18 +0200 |
Felix Wolfsteller |
Fix loading former derivative curves in fixation analysis artifacts DC.
|
| Tue, 16 Oct 2012 11:15:12 +0200 |
Felix Wolfsteller |
Fix issue946 (own style for wkms annotation facets in wq diagrams).
|
| Sat, 13 Oct 2012 21:29:45 +0200 |
Felix Wolfsteller |
Improvements for issue945/6 (separate w and q mainvalues in DC).
|
| Sat, 13 Oct 2012 20:08:13 +0200 |
Felix Wolfsteller |
Improvements for issue945/1 (DC)
|
| Fri, 12 Oct 2012 23:30:09 +0200 |
Felix Wolfsteller |
Improvements for issue949 (q and w facets for official lines).
|
| Fri, 12 Oct 2012 20:21:44 +0200 |
Felix Wolfsteller |
Improvements on issue934/4 (double annotations/DC).
|
| Fri, 12 Oct 2012 17:02:49 +0200 |
Felix Wolfsteller |
In 'annotations per type' - section of DC, also add an 'all'-node.
|
| Fri, 12 Oct 2012 16:43:00 +0200 |
Felix Wolfsteller |
Fix 943/3: Show flood-protections in WSP DC.
|
| Fri, 05 Oct 2012 11:51:32 +0200 |
Felix Wolfsteller |
Fix typo in DC query.
|
| Tue, 02 Oct 2012 10:38:39 +0200 |
Felix Wolfsteller |
Show 'per-type' annotations in longitudinal-section DC.
|
| Fri, 28 Sep 2012 12:15:48 +0200 |
Thomas Arendsen Hein |
dummy merge for repo head
|
| Fri, 28 Sep 2012 08:38:17 +0000 |
Ingo Weinzierl |
Added an 'info' node to DEMs in the datacage.
|
| Fri, 21 Sep 2012 14:33:17 +0000 |
Raimund Renkert |
Add river annotations to bedheight difference charts.
|
| Fri, 21 Sep 2012 07:50:26 +0000 |
Felix Wolfsteller |
Better Partial fix for issue880 (dc).
|
| Fri, 21 Sep 2012 07:26:47 +0000 |
Felix Wolfsteller |
Partial issue880 (dc).
|
| Tue, 08 Nov 2011 12:03:53 +0000 |
Ingo Weinzierl |
Picked rev3178 from trunk.
|
| Fri, 31 Aug 2012 11:11:17 +0000 |
Felix Wolfsteller |
fix issue817, removed double entries from dc conf.
|
| Tue, 28 Aug 2012 11:45:23 +0000 |
Raimund Renkert |
MINFO: Implemented UI and facet/artifact stack for bed height differences.
|
| Wed, 15 Aug 2012 14:45:55 +0000 |
Felix Wolfsteller |
Do not hard-recommend gauge-discharges for fix wq.
|
| Wed, 15 Aug 2012 07:55:50 +0000 |
Felix Wolfsteller |
More former calculations in fixa dwt dc.
|
| Wed, 15 Aug 2012 07:41:11 +0000 |
Felix Wolfsteller |
More former calculations in FixA DC.
|
| Tue, 14 Aug 2012 14:02:28 +0000 |
Felix Wolfsteller |
Add more discharge curve data to DC and W/Q diag.
|
| Tue, 14 Aug 2012 13:32:49 +0000 |
Felix Wolfsteller |
Add more facets to DC and W/Q diag.
|
| Tue, 14 Aug 2012 08:42:08 +0000 |
Felix Wolfsteller |
Basedata in FixA WQ DC and diagram.
|
| Mon, 13 Aug 2012 12:22:11 +0000 |
Felix Wolfsteller |
Show former calculation in FixA WQ DC.
|
| Mon, 13 Aug 2012 12:04:01 +0000 |
Felix Wolfsteller |
Show former calculations in Fix/DeltaWT DC, fixes.
|
| Mon, 13 Aug 2012 11:53:40 +0000 |
Felix Wolfsteller |
Show more former calculation in FixA LS DC.
|
| Mon, 13 Aug 2012 09:41:21 +0000 |
Felix Wolfsteller |
Add annotations to fixA longitudinal Sections.
|
| Fri, 10 Aug 2012 11:30:28 +0000 |
Felix Wolfsteller |
Add more qsectory infrastructure.
|
| Wed, 08 Aug 2012 08:13:24 +0000 |
Felix Wolfsteller |
Set info attribute in datacage, to have tooltips in gui.
|
| Fri, 13 Jul 2012 19:08:58 +0000 |
Felix Wolfsteller |
Let DC offer official lines for longitudinal disch. diags.
|
| Fri, 13 Jul 2012 13:43:26 +0000 |
Felix Wolfsteller |
Very basic official lines in dc, malplaced.
|
| Wed, 11 Jul 2012 16:05:24 +0000 |
Felix Wolfsteller |
Make official lines loadable from dc (by hand) for longitudinal sections.
|
| Sun, 01 Jul 2012 08:46:04 +0000 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
| Thu, 07 Jun 2012 20:47:17 +0000 |
Felix Wolfsteller |
Polished Gauge Discharges in computed discharge curves.
|
| Thu, 24 May 2012 13:59:07 +0000 |
Felix Wolfsteller |
Precised DC config.
|
| Thu, 24 May 2012 05:59:25 +0000 |
Felix Wolfsteller |
Include thematic heights in dc conf for reference curves.
|
| Thu, 24 May 2012 04:33:52 +0000 |
Felix Wolfsteller |
Fixation relative points in reference curves.
|
| Wed, 23 May 2012 21:45:52 +0000 |
Felix Wolfsteller |
Serve heightmarks and floodprotection in dc conf for duration curves.
|
| Wed, 23 May 2012 20:42:29 +0000 |
Felix Wolfsteller |
Add relative-points-fixations for duration curves in dc conf.
|
| Wed, 23 May 2012 08:12:49 +0000 |
Felix Wolfsteller |
Modify Cross-Section DC conf to allow loading of waterlevels, fixations and heightmarks.
|
| Tue, 22 May 2012 19:42:54 +0000 |
Felix Wolfsteller |
Adjusted dc conf.
|
| Mon, 21 May 2012 12:21:35 +0000 |
Felix Wolfsteller |
Allow loading of previous reference curves.
|
| Mon, 21 May 2012 12:09:02 +0000 |
Felix Wolfsteller |
Prepare reference curve dc conf.
|
| Mon, 21 May 2012 09:02:58 +0000 |
Felix Wolfsteller |
Allow to load previous DurationCurves and fixations in Dur.C. via DC.
|
| Sun, 13 May 2012 21:13:45 +0000 |
Felix Wolfsteller |
Add duration_curve.q loading via datacage.
|
| Fri, 11 May 2012 12:14:36 +0000 |
Felix Wolfsteller |
Show HYKS in datacage also in non-recommendation mode.
|
| Thu, 10 May 2012 11:56:40 +0000 |
Ingo Weinzierl |
Added support for WMS gauges in floodmaps and maps.
|
| Thu, 10 May 2012 11:14:17 +0000 |
Ingo Weinzierl |
Improved datacage configuration for floodmaps and maps and modified the WMS layer artifacts to support names for layers.
|
| Tue, 08 May 2012 13:55:59 +0000 |
Ingo Weinzierl |
Modified floodmap specific datacage configuration and improved WMS hws layer.
|
| Tue, 08 May 2012 12:14:55 +0000 |
Ingo Weinzierl |
Modified floodmap specific datacage configuration and improved WMS catchment layer.
|
| Fri, 16 Mar 2012 09:51:51 +0000 |
Ingo Weinzierl |
Fixed broken Floodmaps in datacage for floodmap output.
|
| Thu, 08 Mar 2012 14:21:09 +0000 |
Ingo Weinzierl |
Modified the datacage structure of 'floodmaps'.
|
| Thu, 08 Mar 2012 13:06:11 +0000 |
Ingo Weinzierl |
Improved the datacage configuration to serve floodmaps.
|
| Thu, 01 Mar 2012 12:44:33 +0000 |
Felix Wolfsteller |
Partial fix flys/issue615, adjusted datacage conf.
|
| Thu, 09 Feb 2012 15:48:13 +0000 |
Felix Wolfsteller |
Changed dashes in entitie names to underscores.
|
| Fri, 20 Jan 2012 09:14:53 +0000 |
Raimund Renkert |
'New chart' for cross sections.
|
| Thu, 19 Jan 2012 12:59:36 +0000 |
Felix Wolfsteller |
Recommend hyks if hit by cross section out.
|
| Mon, 16 Jan 2012 08:40:42 +0000 |
Ingo Weinzierl |
Enabled old floodmap calculations for output type 'map'.
|
| Thu, 12 Jan 2012 13:41:23 +0000 |
Felix Wolfsteller |
Fix flys/issue450 (i18n: Datenkorb: longitudinal-section).
|
| Wed, 11 Jan 2012 14:36:19 +0000 |
Felix Wolfsteller |
Fix flys/issue439, made annotations available via datacage.
|
| Wed, 11 Jan 2012 14:32:50 +0000 |
Raimund Renkert |
Introduced new output type 'map'.
|
| Wed, 11 Jan 2012 10:17:16 +0000 |
Ingo Weinzierl |
Made old calculation results available for floodmaps.
|
| Fri, 06 Jan 2012 08:06:00 +0000 |
Felix Wolfsteller |
flys/issue442 (i18n: Datenkorb: flood-protections)
|
| Fri, 06 Jan 2012 07:57:28 +0000 |
Felix Wolfsteller |
Fix typo in meta data, such that string can be translated in GUI.
|
| Tue, 13 Dec 2011 13:37:18 +0000 |
Felix Wolfsteller |
Recommend cross sections if they can be shown.
|
| Wed, 16 Nov 2011 15:53:52 +0000 |
Felix Wolfsteller |
Extended DC conf to offer w/q kind of data (currently used in computed discharge curve diagr. only).
|
| Wed, 16 Nov 2011 09:43:58 +0000 |
Felix Wolfsteller |
Recommend fixations for computed discharge curves.
|
| Fri, 11 Nov 2011 12:07:06 +0000 |
Felix Wolfsteller |
Include computed discharge curves in dc conf.
|
| Fri, 11 Nov 2011 11:59:41 +0000 |
Felix Wolfsteller |
Somewhat unified user-part of dc config.
|
| Fri, 11 Nov 2011 07:59:42 +0000 |
Felix Wolfsteller |
Extended dc conf.
|
| Thu, 10 Nov 2011 14:25:56 +0000 |
Ingo Weinzierl |
Added new WMSFixpointsArtifact for displaying fixpoints in maps.
|
| Thu, 10 Nov 2011 14:06:49 +0000 |
Felix Wolfsteller |
Refactored datacage conf to (re)use macros.
|
| Thu, 10 Nov 2011 13:54:24 +0000 |
Ingo Weinzierl |
Added new WMSBuildingsArtifact for displaying buildings in maps.
|
| Thu, 10 Nov 2011 13:40:05 +0000 |
Ingo Weinzierl |
Added new WMSLineArtifact for displaying lines in maps.
|
| Thu, 10 Nov 2011 11:48:54 +0000 |
Felix Wolfsteller |
Adjusted DC for heightmarks (and other) in discharge longitudinal sections.
|
| Thu, 10 Nov 2011 11:37:51 +0000 |
Felix Wolfsteller |
Have old_data in dc for discharge_longitudinal_sections.
|
| Thu, 10 Nov 2011 11:21:20 +0000 |
Felix Wolfsteller |
Revert/apply accidental/corrected commit.
|
| Wed, 09 Nov 2011 16:49:58 +0000 |
Ingo Weinzierl |
Added new WMSFloodplainArtifact for displaying floodplains in maps.
|
| Wed, 09 Nov 2011 16:28:29 +0000 |
Ingo Weinzierl |
Added new WMSCatchmentArtifact for displaying catchments in maps.
|
| Wed, 09 Nov 2011 16:07:07 +0000 |
Ingo Weinzierl |
Added new WMSHwsArtifact for displaying flood protection works.
|
| Wed, 09 Nov 2011 13:17:55 +0000 |
Felix Wolfsteller |
Recommend mainvalues for Duration Curve Diagrams, minor refactoring.
|
| Tue, 08 Nov 2011 11:50:08 +0000 |
Ingo Weinzierl |
Removed orphanded datacage config which is no longer loadable.
|
| Fri, 04 Nov 2011 14:09:05 +0000 |
Ingo Weinzierl |
Added datacage configuration, loader (Artifact and State) and a theme for cross section tracks.
|
| Fri, 04 Nov 2011 13:29:15 +0000 |
Felix Wolfsteller |
Re-enabled mainvalue-recommendation for computed discharge curves.
|
| Fri, 04 Nov 2011 12:21:12 +0000 |
Ingo Weinzierl |
Removed DEMs from floodmap datacage configuration.
|
| Fri, 04 Nov 2011 10:57:47 +0000 |
Felix Wolfsteller |
Disable recommendations of mainvalues for discharge curves.
|
| Wed, 02 Nov 2011 13:41:39 +0000 |
Felix Wolfsteller |
Apply point theme to heightmark data imported via datacage to longitudinal section diagram.
|
| Tue, 01 Nov 2011 14:54:59 +0000 |
Ingo Weinzierl |
Added datacage config and loaders for KM WMS layer in floodmaps.
|
| Fri, 28 Oct 2011 12:41:10 +0000 |
Felix Wolfsteller |
Add static data conf to w-difference / datacage.
|
| Fri, 28 Oct 2011 12:18:00 +0000 |
Felix Wolfsteller |
Load and display annotations in w-difference diagrams, minor polishing.
|
| Thu, 27 Oct 2011 14:04:04 +0000 |
Felix Wolfsteller |
Prevent recommendation of not yet loadable data.
|
| Wed, 26 Oct 2011 12:03:59 +0000 |
Felix Wolfsteller |
Added DC configuration to load additional data in longitudinal section.
|
| Tue, 25 Oct 2011 14:32:30 +0000 |
Felix Wolfsteller |
Fix broken dc config.
|
| Tue, 25 Oct 2011 13:08:31 +0000 |
Felix Wolfsteller |
Configured datacage to hand out id of artifact that can produce the w_diff.
|
| Tue, 25 Oct 2011 12:37:05 +0000 |
Felix Wolfsteller |
Include differences in datacage.
|
| Tue, 25 Oct 2011 12:13:04 +0000 |
Felix Wolfsteller |
Cosmetics.
|
| Wed, 19 Oct 2011 13:51:16 +0000 |
Felix Wolfsteller |
Fix datacage to let client load flood-protection and zuss.
|
| Tue, 18 Oct 2011 15:22:33 +0000 |
Felix Wolfsteller |
Also display the 'zus' in wdiff-input datacage.
|
| Tue, 18 Oct 2011 14:25:50 +0000 |
Felix Wolfsteller |
Adjusted datacage-configuration to present flood-protections in certain case.
|
| Mon, 17 Oct 2011 15:53:03 +0000 |
Sascha L. Teichmann |
flys/issue314: Variables in datacage are now case insensitive.
|
| Wed, 28 Sep 2011 14:01:00 +0000 |
Ingo Weinzierl |
Bugfix: #328 Improved datacage configuration and labels for selected waterlevels.
|
| Fri, 16 Sep 2011 14:57:14 +0000 |
Ingo Weinzierl |
Use DGM Id in FLYSArtifact's data pool to query DGMs for floodmaps instead of querying DGMs by given range values.
|
| Fri, 16 Sep 2011 13:26:08 +0000 |
Ingo Weinzierl |
Added a DEM section to the floodmap section in the datacage configuration.
|
| Fri, 16 Sep 2011 09:51:02 +0000 |
Ingo Weinzierl |
Repaired datacage configuration. The system specific stuff is also displayed if a user-id is given.
|
| Fri, 26 Aug 2011 15:32:58 +0000 |
Sascha L. Teichmann |
Made it Oracle compatible
|
| Fri, 26 Aug 2011 11:11:46 +0000 |
Felix Wolfsteller |
Recommend MainValues for Computed discharge curves.
|
| Wed, 24 Aug 2011 12:12:44 +0000 |
Felix Wolfsteller |
Added conf for factory and rule for MainValueArtifacts, missing ChangeLog entry.
|
| Wed, 24 Aug 2011 10:53:01 +0000 |
Sascha L. Teichmann |
Datacage: Use 'ids' in user specific part, too.
|
| Wed, 24 Aug 2011 10:32:46 +0000 |
Sascha L. Teichmann |
Datacage template: s/db-ids/ids/g
|
| Mon, 22 Aug 2011 13:07:26 +0000 |
Sascha L. Teichmann |
Datacage: filter by out in user specific part
|
| Fri, 19 Aug 2011 09:48:13 +0000 |
Sascha L. Teichmann |
Fixed flys/issue262: Unified user and system datacage template
|
