log flys-artifacts/ChangeLog @ 745:f959faaa7c4a

age author description
Mon, 27 Jun 2011 09:42:21 +0000 Sascha L. Teichmann Fix for flys/issue150: Invert the x axis if its guessed that water is increasing.
Mon, 27 Jun 2011 09:17:41 +0000 Sascha L. Teichmann WQ: Added a method to guess is increasing.
Mon, 27 Jun 2011 07:45:32 +0000 Ingo Weinzierl #177 Commented out the code that generates the series names in discharge curves. This code currently generates memory problems and stops the server accepting new http requests.
Sun, 26 Jun 2011 17:18:59 +0000 Sascha L. Teichmann Removed trailing whitespace.
Sun, 26 Jun 2011 17:06:35 +0000 Sascha L. Teichmann Removed dead code.
Sun, 26 Jun 2011 16:40:35 +0000 Sascha L. Teichmann Forgot to check in last ChangeLog change.
Sun, 26 Jun 2011 16:19:02 +0000 Sascha L. Teichmann Fix for flys/issue173
Sun, 26 Jun 2011 14:46:48 +0000 Sascha L. Teichmann Fix for flys/issue147
Sun, 26 Jun 2011 13:07:44 +0000 Sascha L. Teichmann Fix for flys/issue86
Sat, 25 Jun 2011 17:35:50 +0000 Sascha L. Teichmann Fixed "W am Pegel" calculations.
Fri, 24 Jun 2011 12:05:13 +0000 Ingo Weinzierl #174 Longitudinal section charts will now have an upper margin again.
Fri, 24 Jun 2011 09:49:27 +0000 Ingo Weinzierl #172 Charts of type duration curve will now have a lower X set to '0'.
Thu, 23 Jun 2011 21:44:24 +0000 Sascha L. Teichmann ATWriter: Results are now in cm. Made it more robust against corner cases.
Thu, 23 Jun 2011 17:22:17 +0000 Sascha L. Teichmann Added generation and configuration of AT facets.
Thu, 23 Jun 2011 16:45:48 +0000 Sascha L. Teichmann Added exporter for AT facets.
Thu, 23 Jun 2011 15:50:44 +0000 Sascha L. Teichmann New AT writer for results.
Thu, 23 Jun 2011 13:42:47 +0000 Ingo Weinzierl #157 Both types of discharge curves will now include the '0' value on the x-axis.
Thu, 23 Jun 2011 12:39:59 +0000 Sascha L. Teichmann WQDay is based on WQ now to make it exportable as AT.
Thu, 23 Jun 2011 12:19:12 +0000 Sascha L. Teichmann Added base class WQ for WQKms.
Thu, 23 Jun 2011 08:58:30 +0000 Sascha L. Teichmann Corrected configuration for error reports.
Wed, 22 Jun 2011 14:47:22 +0000 Ingo Weinzierl #164 Create the items for the adapted WQ state with range information for W and Q.
Wed, 22 Jun 2011 10:54:30 +0000 Sascha L. Teichmann "Abflusskurve am Pegel" looks correct again.
Wed, 22 Jun 2011 10:36:27 +0000 Sascha L. Teichmann Improved situtation on rendering "Abflusskurve am Pegel". Not fully working, yet.
Wed, 22 Jun 2011 09:19:16 +0000 Sascha L. Teichmann Generate facets for "Abflusskurven am Pegel". Not working by now. :-/
Wed, 22 Jun 2011 06:51:36 +0000 Ingo Weinzierl #161 Include the 0 on the second y axis (the Q axis) in longitudinal section charts intially.
Tue, 21 Jun 2011 21:41:49 +0000 Sascha L. Teichmann Draw correction curve again.
Tue, 21 Jun 2011 18:10:49 +0000 Ingo Weinzierl #157 Computed discharge curve charts always have a lower bound set to 0.
Tue, 21 Jun 2011 17:39:29 +0000 Ingo Weinzierl #90 Added a margin between chart data and chart axes to avoid displaying curves on the chart border.
Tue, 21 Jun 2011 17:03:46 +0000 Sascha L. Teichmann Fix for flys/issue158
Tue, 21 Jun 2011 16:31:19 +0000 Sascha L. Teichmann Fix for flys/issue154
Tue, 21 Jun 2011 16:22:28 +0000 Sascha L. Teichmann Only generate 'outs' if they have facets.
Tue, 21 Jun 2011 14:33:00 +0000 Ingo Weinzierl Put the time-to-live of the collection into its DESCRIBE document.
Mon, 20 Jun 2011 14:36:42 +0000 Sascha L. Teichmann Configured states to generate report facets.
Mon, 20 Jun 2011 14:14:20 +0000 Sascha L. Teichmann Generate report facets if there are problems with the calculations.
Mon, 20 Jun 2011 13:47:59 +0000 Sascha L. Teichmann Added generator and facet for error reports.
Mon, 20 Jun 2011 12:32:32 +0000 Sascha L. Teichmann New model to transport data and error reports of calculations.
Sat, 18 Jun 2011 20:20:34 +0000 Sascha L. Teichmann Added calculation "am Pegel" version to the "Wasserspiegellage" calculation.
Sat, 18 Jun 2011 18:19:34 +0000 Sascha L. Teichmann Removed dead code.
Sat, 18 Jun 2011 17:03:17 +0000 Sascha L. Teichmann Only generate facets when needed.
Fri, 17 Jun 2011 16:17:03 +0000 Sascha L. Teichmann Merged revisions 2127-2133,2136-2137,2140,2143-2144,2146,2150-2151,2153-2154 via svnmerge from
Fri, 17 Jun 2011 13:00:54 +0000 Ingo Weinzierl Added a parameter 'wq_free' that determines that mode of calculation 1 (specifies if the calculation is bound to a gauge or not).
Fri, 17 Jun 2011 12:38:41 +0000 Ingo Weinzierl DischargeLongitudinalSectionCurve will have corrected W facets now.
Wed, 15 Jun 2011 15:28:54 +0000 Ingo Weinzierl Merged with trunk and introduced hashing of computed values. facets-slt
Tue, 14 Jun 2011 16:26:59 +0000 Sascha L. Teichmann DistanceInfoService: Got rid of namespace in result document.
Tue, 14 Jun 2011 15:34:27 +0000 Ingo Weinzierl #77 The curves in a duration chart will have names now.
Tue, 14 Jun 2011 13:54:19 +0000 Ingo Weinzierl The min/max W/Q ranges in the panel for calculation4 are written into the DESCRIBE.
Tue, 14 Jun 2011 13:53:25 +0000 Sascha L. Teichmann Write top 'Oberkante' and bottom 'Unterkante' to out going XML if they exist.
Tue, 14 Jun 2011 10:38:00 +0000 Ingo Weinzierl The state that is used to enter locations writes the river's range into the DESCRIBE now.
Fri, 10 Jun 2011 15:59:47 +0000 Sascha L. Teichmann Added error reporting to 'Wasserspiegellage' calculation.
Fri, 10 Jun 2011 14:24:15 +0000 Sascha L. Teichmann Added error reporting to 'Abflusskurve' calculation.
Fri, 10 Jun 2011 12:38:08 +0000 Sascha L. Teichmann Added error reporting to 'Dauerzahlen' calculation.
Fri, 10 Jun 2011 10:10:04 +0000 Sascha L. Teichmann Added methods to remove NaN values.
Fri, 10 Jun 2011 09:19:27 +0000 Sascha L. Teichmann Added calculation base class to collect the problems during the calculations. Adjusted calculation 4 to use the mechanism.
Thu, 09 Jun 2011 10:48:13 +0000 Ingo Weinzierl Changed the zoom process - the values in the chart request document are percentual values that apply to every axis.
Thu, 09 Jun 2011 10:31:22 +0000 Ingo Weinzierl Corrected axes/datasets mappings.
Wed, 08 Jun 2011 19:11:18 +0000 Sascha L. Teichmann Berechnung 4: Determine the gauges by their station position. This hopefully fixes segment assignment problems.
Wed, 08 Jun 2011 18:50:40 +0000 Sascha L. Teichmann Berechnung 4: Added more debug output
Wed, 08 Jun 2011 13:57:43 +0000 Ingo Weinzierl #103 PART 1: The numbers which are written into the static DESCRIBE part are i18n formatted now.
Wed, 08 Jun 2011 13:32:56 +0000 Ingo Weinzierl #93 Changed the name of calculation type 4.
Wed, 08 Jun 2011 13:03:21 +0000 Ingo Weinzierl Made the chart range determination more robust against NaN values.
Wed, 08 Jun 2011 12:35:44 +0000 Ingo Weinzierl Set the second y axis to axis position 1 (starts at 0).
Wed, 08 Jun 2011 10:25:39 +0000 Sascha L. Teichmann s@m³/s@m\\u00b3/s@
Wed, 08 Jun 2011 10:21:36 +0000 Sascha L. Teichmann s@m³/s@m\u00b3/s@
Wed, 08 Jun 2011 10:19:23 +0000 Sascha L. Teichmann Only generate an axis element if a axis really exists.
Tue, 07 Jun 2011 21:01:09 +0000 Sascha L. Teichmann BackJumpCorrector: Simpified array swapping.
Tue, 07 Jun 2011 15:05:12 +0000 Sascha L. Teichmann Use java.util.List instead of java.util.Vector. Removed superfluous imports.
Tue, 07 Jun 2011 14:28:44 +0000 Sascha L. Teichmann code clean up in states
Tue, 07 Jun 2011 13:15:02 +0000 Ingo Weinzierl The ChartInfoGenerator appends axes range information to the document now.
Tue, 07 Jun 2011 11:43:30 +0000 Sascha L. Teichmann If Artifact.feed() fails do not store invalid values in database.
Mon, 06 Jun 2011 11:34:44 +0000 Sascha L. Teichmann Removed asymmetrical "- 1" from width calculation.
Sun, 05 Jun 2011 20:47:51 +0000 Sascha L. Teichmann Berechnung 4: Fixed problem when more than one value per segment are given.
Sun, 05 Jun 2011 18:24:46 +0000 Sascha L. Teichmann Refactored version of "Berechnung 4"
Fri, 03 Jun 2011 10:21:13 +0000 Ingo Weinzierl #90 Removed margins between data area border and curves.
Fri, 03 Jun 2011 07:20:39 +0000 Ingo Weinzierl Refactored the chart creation in the ChartInfoGenerators. Now, every chart is created by the XYChartGenerator again.
Fri, 03 Jun 2011 06:47:51 +0000 Ingo Weinzierl Charts are zoomed to a specified view if the attribute document for the chart creation contains an x and/or y range.
Thu, 02 Jun 2011 15:47:08 +0000 Sascha L. Teichmann Set collection ttl to 6 hours.
Wed, 01 Jun 2011 17:01:44 +0000 Sascha L. Teichmann Added parser for segments
Wed, 01 Jun 2011 09:57:22 +0000 Sascha L. Teichmann Fix crashes in back jump correction.
Wed, 01 Jun 2011 09:18:00 +0000 Ingo Weinzierl The matrix that is used to transform chart image coordinates into chart coordinates supports inverted x-axis now.
Wed, 01 Jun 2011 08:01:07 +0000 Ingo Weinzierl Introduced a new output generators for creating chart info documents.
Tue, 31 May 2011 14:56:18 +0000 Ingo Weinzierl Added support for the 'type' parameter of the collection's out() operation.
Tue, 31 May 2011 09:35:19 +0000 Sascha L. Teichmann Use an explicit reference km for interpolation now.
Mon, 30 May 2011 11:34:06 +0000 Sascha L. Teichmann Introduce a cache for the distance-info service
Mon, 30 May 2011 09:19:57 +0000 Sascha L. Teichmann flys/issue82: Only successful interpolations are named.
Fri, 27 May 2011 16:52:37 +0000 Sascha L. Teichmann Re-eanbled the calculation of the backjump correction.
Fri, 27 May 2011 10:09:46 +0000 Ingo Weinzierl Removed XML debug statement.
Fri, 27 May 2011 10:03:07 +0000 Ingo Weinzierl Moved the code part that skips themes to a better place. This let us paint empty charts with no themes at all.
Fri, 27 May 2011 09:47:13 +0000 Ingo Weinzierl We will no longer put deactivated themes into the chart.
Fri, 27 May 2011 08:46:26 +0000 Ingo Weinzierl Fixed the process of creating and storing the attribute of a collection.
Thu, 26 May 2011 16:54:16 +0000 Sascha L. Teichmann Make "Berechnungsart 4" work independent of flow direction. Commented out back jump correction temporarily.
Thu, 26 May 2011 15:55:48 +0000 Sascha L. Teichmann Generate fields for w/q input depend on flow direction.
Thu, 26 May 2011 14:27:06 +0000 Sascha L. Teichmann Take the flow direction into account.
Thu, 26 May 2011 09:41:57 +0000 Sascha L. Teichmann Round exploded values to a precision of 1e-6.
Wed, 25 May 2011 15:31:25 +0000 Sascha L. Teichmann WST value table: Qs are now stored in ranges for each column.
Tue, 24 May 2011 14:46:45 +0000 Sascha L. Teichmann First part of storing qs in ranges
Tue, 24 May 2011 13:24:24 +0000 Ingo Weinzierl Small bugfixes in the WQ selection state.
Tue, 24 May 2011 12:58:55 +0000 Ingo Weinzierl ISSUE-40 (part I/II) Write values that the user had former selected / inserted into DESCRIBE document to preselect such data in the UI.
Tue, 24 May 2011 12:40:06 +0000 Ingo Weinzierl Removed needless imports.
Tue, 24 May 2011 12:37:45 +0000 Ingo Weinzierl ISSUE-85 (part III/III) Use the given kilometer values for the waterlevel computation.
Tue, 24 May 2011 11:27:37 +0000 Ingo Weinzierl ISSUE-85 (part I/III) Added further fields for the location/range state.
Tue, 24 May 2011 11:23:57 +0000 Sascha L. Teichmann Moved WST value table cache key to a separate class.
Mon, 23 May 2011 22:33:37 +0000 Sascha L. Teichmann Introduce model to store q values of WST columns efficiently.
Mon, 23 May 2011 15:11:55 +0000 Ingo Weinzierl ISSUE-62 (part I/II) States are no longer filled with data - if a state needs user input, it needs to query the owner artifact.
Mon, 23 May 2011 14:32:17 +0000 Ingo Weinzierl Added a method to dump the artifacts state/data.
Mon, 23 May 2011 13:35:52 +0000 Sascha L. Teichmann flys/issue84: Forget to select wst kind.
Fri, 20 May 2011 10:41:46 +0000 Sascha L. Teichmann fix for flys/issue81: km weights were swapped
Fri, 20 May 2011 09:23:09 +0000 Ingo Weinzierl Tagged release 2.3.1 of flys-artifacts.
Fri, 20 May 2011 09:21:38 +0000 Ingo Weinzierl Prepared Changes for the upcoming release.
Fri, 20 May 2011 09:23:09 +0000 Ingo Weinzierl Tagged release 2.3.1 of flys-artifacts.
Fri, 20 May 2011 06:04:42 +0000 Hans Plum Notes to Release V 2.3.1
Thu, 19 May 2011 14:51:53 +0000 Sascha L. Teichmann Increment kms array size by one to take the end of range, too.
Thu, 19 May 2011 14:38:15 +0000 Sascha L. Teichmann Use unsharp km lookup (epsilon = 0.0001).
Thu, 19 May 2011 12:39:41 +0000 Ingo Weinzierl ISSUE-66 Fixed broken english subtitle template for longitudinal section charts.
Thu, 19 May 2011 12:33:12 +0000 Ingo Weinzierl The curve of a computed discharge curve has a human readable text now.
Thu, 19 May 2011 09:54:57 +0000 Sascha L. Teichmann Reintroduced titles for the "W for unausgeglichene Abfluesse".
Thu, 19 May 2011 09:45:29 +0000 Ingo Weinzierl Added names for discharge curves (at gauges).
Thu, 19 May 2011 09:31:47 +0000 Sascha L. Teichmann Removed dead code
Thu, 19 May 2011 09:24:08 +0000 Sascha L. Teichmann use correct kms and step width now now
Wed, 18 May 2011 17:37:06 +0000 Sascha L. Teichmann Use new logic to calculate "W für ungleichwertige Abfluesse". Not working yet.
Wed, 18 May 2011 10:59:38 +0000 Ingo Weinzierl Enabled the discharge longitudinal section to be exported as WST.
Wed, 18 May 2011 09:11:10 +0000 Sascha L. Teichmann flys/issue69: Connected calculation with the UI
Wed, 18 May 2011 09:02:50 +0000 Ingo Weinzierl W and Q curves in longitudinal section curves will now have names.
Wed, 18 May 2011 08:04:54 +0000 Ingo Weinzierl WSTs will now have a header that contains the names of the Ws or Qs that had been defined for the computation.
Tue, 17 May 2011 16:31:07 +0000 Ingo Weinzierl Implemented writer that creates WSTs and enabled the WaterlevelExporter to create those.
Tue, 17 May 2011 14:22:27 +0000 Ingo Weinzierl Added a new class that supports formatters for different types of data.
Tue, 17 May 2011 11:53:02 +0000 Ingo Weinzierl ISSUE-72 Repaired broken XPath expression in MainValuesService to extract start and end kilometer.
Tue, 17 May 2011 08:55:38 +0000 Sascha L. Teichmann Separated the WST table loading logic from the calculations.
Tue, 17 May 2011 07:39:33 +0000 Ingo Weinzierl Tagged RELEASE 2.3
Mon, 16 May 2011 10:34:59 +0000 Hans Plum Added NEWS File for collecting enduser-sepcific information for releases
Sun, 15 May 2011 21:08:41 +0000 Sascha L. Teichmann First step to calculate "W fuer ungleichwertige Abfluesse" correctly. flys/issue55
Sun, 15 May 2011 10:59:08 +0000 Sascha L. Teichmann Fix step to fix issue69: Do the right calculation
Fri, 13 May 2011 11:26:29 +0000 Ingo Weinzierl Prepared Changes for the upcoming release 2.3.
Fri, 13 May 2011 08:00:58 +0000 Ingo Weinzierl ISSUE-37 The river state wants to be rendered using a river_panel UI provider.
Thu, 12 May 2011 09:11:16 +0000 Ingo Weinzierl Charts are generated using the size defined in the incoming request document.
Wed, 11 May 2011 16:31:38 +0000 Ingo Weinzierl ISSUE-52 The longitudinal section charts will now always have the head of the river at the left side.
Wed, 11 May 2011 09:51:54 +0000 Sascha L. Teichmann MetaDataService: Make incoming XML symmetric to DistanceInfoService.
Tue, 10 May 2011 17:57:56 +0000 Ingo Weinzierl ISSUE-47 Adjusted the line color of W, Q and corrected W curves (temporarilly).
Tue, 10 May 2011 17:12:15 +0000 Ingo Weinzierl Display gridlines in charts.
Tue, 10 May 2011 16:10:01 +0000 Ingo Weinzierl ISSUE-53 Formatted number values of CSV exports.
Tue, 10 May 2011 15:28:30 +0000 Ingo Weinzierl Implemented the input validation of WQ in the adapted WQ panel.
Tue, 10 May 2011 13:18:03 +0000 Ingo Weinzierl The CSV exports will now have headers.
Tue, 10 May 2011 12:43:12 +0000 Sascha L. Teichmann Datacage: Added river parameter to meta data services.
Tue, 10 May 2011 12:19:17 +0000 Ingo Weinzierl Added subtitles to the available charts.
Tue, 10 May 2011 11:40:15 +0000 Ingo Weinzierl Added a method to Resources that returns translated compound messages.
Tue, 10 May 2011 10:26:26 +0000 Ingo Weinzierl Improved the OutGenerator interface to set a master artifact for the out generation.
Tue, 10 May 2011 07:40:06 +0000 Ingo Weinzierl Enabled the WINFO artifact to choose between W and Q mode in the adapted wq panel of the discharge longitudinal section computation.
Mon, 09 May 2011 19:54:24 +0000 Sascha L. Teichmann Datacage service: Cleanup served XML document.
Mon, 09 May 2011 13:47:15 +0000 Sascha L. Teichmann Datacage: Added forgotten columns of fixation WST to datcage template.
Mon, 09 May 2011 12:53:49 +0000 Ingo Weinzierl Enabled i18n support for charts.
Mon, 09 May 2011 09:55:47 +0000 Ingo Weinzierl Added a CSV exporter for the discharge longitudinal section computation.
Sat, 07 May 2011 21:34:02 +0000 Sascha L. Teichmann Back jump correction should work now for both flow directions.
Fri, 06 May 2011 16:49:31 +0000 Sascha L. Teichmann Added data cage configuration for 'Längsschnitt'.
Fri, 06 May 2011 14:19:27 +0000 Ingo Weinzierl Implemented methods to retrieve and compute the data used to create discharge longitudinal sections.
Thu, 05 May 2011 12:34:53 +0000 Ingo Weinzierl Small bugfix in the adapted WQ state and further i18n strings.
Thu, 05 May 2011 12:31:28 +0000 Ingo Weinzierl Changed the y-axis title of the computed discharge curve.
Thu, 05 May 2011 06:12:44 +0000 Ingo Weinzierl Improved the transition model and added states to enable the 'discharge longitudinal section' computation - NOTE: the work in this computation has not finished yet.
Thu, 05 May 2011 05:27:41 +0000 Ingo Weinzierl Use a default step width (100m) between two kilometers if no width is given.
Thu, 05 May 2011 04:52:47 +0000 Ingo Weinzierl Fixed a potential NullPointerException while creating a longitudinal section chart.
Wed, 04 May 2011 17:01:22 +0000 Sascha L. Teichmann fix flys/issue30
Wed, 04 May 2011 13:51:25 +0000 Sascha L. Teichmann 'berechnete Abflusskurve': generate ws from qs
Wed, 04 May 2011 10:10:11 +0000 Ingo Weinzierl Filled the discharge curve exporter (CSV) with code - now, it generates a CSV export with the computed discharge curve data.
Wed, 04 May 2011 08:24:50 +0000 Ingo Weinzierl Enabled the WINFO artifact to compute the data for discharge curves (computed) - ComputedDischargeCurveGenerator uses those values now to create the chart.
Wed, 04 May 2011 07:48:39 +0000 Ingo Weinzierl Improved the transition model and added classes to enable the WINFO artifact to create computed discharge curves - NOTE: each of the new classes is just a stub.
Tue, 03 May 2011 17:37:56 +0000 Ingo Weinzierl Added an exporter to export the computed data of a duration curve.
Tue, 03 May 2011 17:34:29 +0000 Ingo Weinzierl Modified a confusing debug statement.
Tue, 03 May 2011 16:36:21 +0000 Ingo Weinzierl Added an exporter (OutGenerator) for waterlevels which currently supports CSV exports.
Tue, 03 May 2011 16:26:35 +0000 Ingo Weinzierl Introduced an export output target on collection level that enables collections to be exported.
Tue, 03 May 2011 13:23:00 +0000 Ingo Weinzierl I18N Bugfix.
Tue, 03 May 2011 13:15:56 +0000 Ingo Weinzierl Added i18n strings for the location selection.
Tue, 03 May 2011 12:05:32 +0000 Ingo Weinzierl Enabled the WINFO artifact to create duration curves - new OutGenerator, added methods for data computation.
Tue, 03 May 2011 09:23:17 +0000 Sascha L. Teichmann visualize-transitions.xsl: State quoting was done wrong.
Mon, 02 May 2011 16:58:04 +0000 Ingo Weinzierl Enhanced the transition model to reach a state that creates duration curves.
Mon, 02 May 2011 16:50:58 +0000 Sascha L. Teichmann Flush/persist cache at end of program.
Mon, 02 May 2011 16:44:02 +0000 Ingo Weinzierl The DischargeCurveGenerator uses public methods of FLYSArtifact to retrieve all necessary information of the current settings.
Mon, 02 May 2011 16:28:57 +0000 Sascha L. Teichmann Moved expensive allocation of result arrays out of km loop.
Mon, 02 May 2011 15:17:04 +0000 Ingo Weinzierl Enabled the FLYSArtifact to handle an array of inserted WQ values (without given ranges).
Mon, 02 May 2011 13:42:02 +0000 Sascha L. Teichmann Repaired DischargeTables.getQForW()
Mon, 02 May 2011 12:47:10 +0000 Ingo Weinzierl Enabled the server to handle longitudinal section chart requests with inserted W data - Ws are transformed into Qs then.
Mon, 02 May 2011 12:41:24 +0000 Ingo Weinzierl Removed an unused parameter from DischargeTables.getQForW().
Mon, 02 May 2011 09:41:22 +0000 Ingo Weinzierl Ws and Qs of a longitudinal section chart are mapped to an own range axis now.
Sun, 01 May 2011 10:58:38 +0000 Sascha L. Teichmann Added caching support for the wst value tables.
Fri, 29 Apr 2011 16:56:37 +0000 Sascha L. Teichmann Added ehcache support.
Fri, 29 Apr 2011 15:10:44 +0000 Sascha L. Teichmann Added meta data service.
Fri, 29 Apr 2011 14:39:42 +0000 Sascha L. Teichmann Added meta service stub. TODO: Add meta data builder.
Fri, 29 Apr 2011 13:06:49 +0000 Ingo Weinzierl Bugfix: Changed the datastructure of the ThemeList (inner class of FLYSArtifactCollection) to store the theme of a chart in an ordered list -> Q curves of longitudinal section charts are now drawn.
Fri, 29 Apr 2011 10:13:24 +0000 Ingo Weinzierl Implemented the chart creation of a longitudinal section chart - W and Q facets.
Fri, 29 Apr 2011 10:02:59 +0000 Ingo Weinzierl Improved the calculation of the step width of ranges.
Fri, 29 Apr 2011 10:01:41 +0000 Ingo Weinzierl New method WQKms.size() to retrieve the number of elements in the data pool.
Fri, 29 Apr 2011 08:39:17 +0000 Sascha L. Teichmann WQKms model: Added a get() method which takes destination array as an argument.
Fri, 29 Apr 2011 08:28:44 +0000 Ingo Weinzierl Introduced GNU Trove to store WQKms values in a more performant data structure.
Fri, 29 Apr 2011 08:13:56 +0000 Ingo Weinzierl Added the name of the facet to the parameterlist of OutGenerator.doOut().
Fri, 29 Apr 2011 08:02:54 +0000 Ingo Weinzierl Added themes and mappings for the W and Q theme of a longitudinal section curve.
Fri, 29 Apr 2011 07:46:27 +0000 Ingo Weinzierl Added necessary methods to start the computation of waterlevel data.
Fri, 29 Apr 2011 07:27:05 +0000 Ingo Weinzierl Introduced a model class to store a set of triple data objects that consist of W, Q and Kms information.
Fri, 29 Apr 2011 07:22:25 +0000 Ingo Weinzierl Bugfix: Removed endless loop and a bug while iterating over Hibernate results.
Thu, 28 Apr 2011 12:54:11 +0000 Ingo Weinzierl Added an OutGenerator for creating longitudinal section curves.
Thu, 28 Apr 2011 12:23:40 +0000 Ingo Weinzierl Bugfix: Added missing <output-generators> section to the global configuration.
Thu, 28 Apr 2011 11:32:41 +0000 Ingo Weinzierl Added a further state that is reached if the waterlevel calculation mode has been chosen.
Thu, 28 Apr 2011 11:22:45 +0000 Ingo Weinzierl Added a new Transition to compare values.
Thu, 28 Apr 2011 11:20:11 +0000 Ingo Weinzierl Bugfixes: Adapted a broken method call of TransitionEngine.isStateReachable() and added the outputs of a current state to the DESCRIBE.
Thu, 28 Apr 2011 11:16:21 +0000 Ingo Weinzierl Bugfix: Added the missing init() method to a Transition and call it in the TransitionFactory after a Transition has been created.
Thu, 28 Apr 2011 11:13:06 +0000 Ingo Weinzierl Bugfix: The outputs of a Collection's attribute document are stored in an outputs node now instead of being stored toplevel in the document.
Thu, 28 Apr 2011 11:08:34 +0000 Ingo Weinzierl Throw an illegal argument exception in LocationDistanceSelect.validate() and WQSelect.validate() if no data has been inserted so far.
Thu, 28 Apr 2011 09:09:44 +0000 Sascha L. Teichmann Added XSL transformation do create Graphviz digraph out of conf.xml
Thu, 28 Apr 2011 08:14:20 +0000 Ingo Weinzierl The OutGenerator gets the theme of a facet while output creation.
Wed, 27 Apr 2011 14:42:52 +0000 Ingo Weinzierl Removed useless imports.
Wed, 27 Apr 2011 14:40:44 +0000 Ingo Weinzierl Added an abstract OutGenerator that should be the base class for all generators which create charts.
Wed, 27 Apr 2011 14:35:44 +0000 Ingo Weinzierl Improved the out() operation of a Collection - the OutGenerator gets to know about the facets and its theme.
Tue, 26 Apr 2011 13:29:18 +0000 Ingo Weinzierl The Attributes of a collection are written into its DESCRIBE now.
Tue, 26 Apr 2011 13:17:08 +0000 Ingo Weinzierl Initialized the facet2theme mappings configured in themes.xml and added a function to the ThemeFactory that retrieves a theme from FLYSContext based on its name.
Fri, 22 Apr 2011 15:49:35 +0000 Sascha L. Teichmann Corrected a silly c&p mistake.
Fri, 22 Apr 2011 09:57:27 +0000 Sascha L. Teichmann Implementation of the "Ruecksprungkorrektur" to be done in "W fuer angepassten Abflusslaengschnitt".
Thu, 21 Apr 2011 08:49:58 +0000 Ingo Weinzierl Removed debug code that has been commited by accident.
Thu, 21 Apr 2011 08:47:39 +0000 Ingo Weinzierl Added a first small theme configuration and code to read it.
Thu, 21 Apr 2011 08:44:41 +0000 Ingo Weinzierl Implementation of interfaces and its default implementations and a factory to work with themes.
Wed, 20 Apr 2011 14:26:51 +0000 Sascha L. Teichmann Implementation of "Abflusskurve/Abflusstafel" calculation.
Wed, 20 Apr 2011 13:13:19 +0000 Sascha L. Teichmann Added dependency to Apache Commons Math 2.2 (Apache License 2.0)
Wed, 20 Apr 2011 09:46:40 +0000 Sascha L. Teichmann Discharge table: Fix problem when sorting by q (copied w instead of q).
Wed, 20 Apr 2011 08:00:38 +0000 Ingo Weinzierl Fixed broken HQL statement.
Tue, 19 Apr 2011 17:43:39 +0000 Sascha L. Teichmann Implemented the "Wasserstand/Wasserspiegellagen" calculation.
Tue, 19 Apr 2011 17:37:21 +0000 Sascha L. Teichmann Discharge table: we need a getQForW() and not a getWForQ().
Tue, 19 Apr 2011 14:48:28 +0000 Sascha L. Teichmann Discharge tables: Sorting of q values was done wrong.
Tue, 19 Apr 2011 13:10:27 +0000 Ingo Weinzierl The list of annotations returned by the AnnotationFactory is ordered by its range.
Tue, 19 Apr 2011 12:33:39 +0000 Ingo Weinzierl Added a service that returns the MainValues of a Gauge based on a river name and a stationing.
Tue, 19 Apr 2011 12:31:07 +0000 Ingo Weinzierl Added a factory that returns MainValues.
Tue, 19 Apr 2011 11:05:27 +0000 Sascha L. Teichmann Discharge table: Added static method getWForQ() to interpolate a w value for a given q value based on a given discharge table.
Tue, 19 Apr 2011 10:32:31 +0000 Sascha L. Teichmann Discharge tables: Added convenience constructors/methods to ease the access to the master discharge table of a gauge.
Mon, 18 Apr 2011 16:01:23 +0000 Sascha L. Teichmann Moved the query complexity of creating a w/q value table into view
Mon, 18 Apr 2011 14:40:35 +0000 Sascha L. Teichmann Fetches w/q value tables from the backend.
Mon, 18 Apr 2011 13:23:12 +0000 Ingo Weinzierl Changed the error key that is written to the result document of the feed operation.
Mon, 18 Apr 2011 13:21:52 +0000 Ingo Weinzierl The inserted river is validated in the feed operation().
Mon, 18 Apr 2011 13:00:57 +0000 Ingo Weinzierl The calculation method is validated in the feed() operation.
Mon, 18 Apr 2011 12:36:08 +0000 Ingo Weinzierl The inserted ranges (distance and WQ ranges) are validated in the feed() operation.
Mon, 18 Apr 2011 09:34:18 +0000 Ingo Weinzierl Removed testing code that has been comitted by accident in the last revision.
Mon, 18 Apr 2011 07:39:17 +0000 Ingo Weinzierl The getGauge() method of the FLYSArtifact returns the first gauge based on the given stationing now.
Fri, 15 Apr 2011 13:47:10 +0000 Ingo Weinzierl The WQ state fills the DESCRIBE with default values for W and Q.
Fri, 15 Apr 2011 13:46:22 +0000 Ingo Weinzierl Added a WstFactory to return Wst objects.
Fri, 15 Apr 2011 13:37:51 +0000 Ingo Weinzierl FLYSArtifact provides methods to retrieve the real River, Gauge objects.
Fri, 15 Apr 2011 10:10:37 +0000 Ingo Weinzierl Bugfix: repaired broken imports of the session holder.
Fri, 15 Apr 2011 09:52:37 +0000 Ingo Weinzierl Removed the SessionHolder and adapted imports.

http://dive4elements.wald.intevation.org