felix@3463: false=Nein
felix@3465: true=Ja
felix@3463: 
ingo@125: state.winfo.river = River
ingo@127: state.winfo.calculation_mode = Calculation Mode
ingo@138: state.winfo.location_distance = Location or distance selection
ingo@138: state.winfo.wq = Input for W/Q data
ingo@401: state.winfo.wq_adapted = Input for W/Q data
ingo@386: state.winfo.location = Choose the location
ingo@921: state.winfo.distance = Choose the range
ingo@1952: state.winfo.distance_only = Range selection
ingo@1179: state.winfo.uesk.wsp = Choose the waterlevel
ingo@927: state.winfo.uesk.dgm = Digital Terrain Model
ingo@927: state.winfo.uesk.profiles = Interpolated Profiles
ingo@927: state.winfo.uesk.floodplain = Lateral Boundary
felix@1146: state.winfo.uesk.differences = Differences between waterlevel and terrain
ingo@927: state.winfo.uesk.scenario = Flood Plain / Scenario
rrenkert@5317: state.winfo.uesk.dc-hws = HWS
rrenkert@5317: state.winfo.uesk.user-rgd = User defined shapefiles
rrenkert@5317: state.winfo.uesk.barriers = Digitized HWS
felix@1706: state.winfo.waterlevel_pair_select = Chosen Differences
felix@5336: state.winfo.historicalq.reference_gauge = Selection of Gauge
ingo@2187: state.winfo.historicalq.timerange = Selection of Evaluation time
ingo@2187: state.winfo.historicalq.mode = Selecion of analyses
felix@2247: state.winfo.reference.curve.input.start = Chosen Reference
felix@2247: state.winfo.reference.curve.input.end = Chosen Evaluation
felix@4055: state.winfo.function_select = Chosen Function
felix@4408: state.winfo.extreme.percent = Distance to last extreme in percent
felix@4408: state.winfo.extreme.qinput = Input of Q data
raimund@2651: state.fix.river = River
raimund@2651: state.fix.calculation.mode = Calculation Mode
raimund@2720: state.fix.location = Distance
raimund@2720: state.fix.period = Period
raimund@2720: state.fix.gaugerange = Gaugerange
raimund@2720: state.fix.eventselect = Event selection
raimund@2720: state.fix.analysis.referenceperiod = Reference period
raimund@2720: state.fix.analysis.analysisperiods = Analysis period
raimund@2720: state.fix.analysis.function = Function
christian@3906: state.fix.analysis.preprocessing = Outliers
rrenkert@5977: state.fix.preprocess=use outlier test
felix@3463: state.fix.vollmer.function=Function
christian@3906: state.fix.vollmer.preprocessing = Outliers
felix@4572: state.fix.vollmer.qs = Input for W/Q data
ingo@2187: 
ingo@2693: state.minfo.river = River
ingo@2693: state.minfo.calculation_mode = Calculation Mode
andre@8564: state.minfo.distance = Range selection
ingo@2704: state.minfo.distance_only = Range selection
ingo@2704: state.minfo.dischargestate = Selection of discharge state and channel
raimund@3058: state.minfo.sq.location=Location
ingo@3426: state.minfo.sq.period=Periods
tom@6641: state.minfo.sq.outliers=Tolerance
rrenkert@5397: state.minfo.sq.outlier-method=Outliertest
raimund@3614: state.minfo.bed.year_epoch=Year/Epoch
raimund@3614: state.minfo.bed.difference_select=Differences
raimund@3614: state.minfo.year=Year
raimund@3614: state.minfo.epoch=Epoch
raimund@3631: state.minfo.bed.location = Location/Distance
andre@8637: state.minfo.bed.distance = Range selection
raimund@3631: state.minfo.bed.periods = Periods
raimund@3631: state.minfo.bed.char_diameter = Characteristic Diameter
andre@8637: state.minfo.bed.error.no_data = No data found for selected range.
andre@8637: state.minfo.bed.error.no_data_for_period = No data found for period: {0} - {1}.
ingo@3782: state.minfo.soundings = Choose Soundings
rrenkert@4375: state.minfo.sediment.load.location = Range
rrenkert@4375: state.minfo.sediment.load.year_epoch = Year/Epoch
rrenkert@4375: state.minfo.sediment.load.epochs = Epochs
rrenkert@4375: state.minfo.sediment.load.period = Years
rrenkert@4375: state.minfo.sediment.load.off_epochs = off. Epochs
rrenkert@4375: state.minfo.sediment.load.unit = Unit
felix@7518: state.minfo.sediment.load.t_per_a = (t/a)
felix@7518: state.minfo.sediment.load.m3_per_a = (m\u00b3/a)
andre@8227: state.minfo.sediment.load.sq_interval = Load-Discharge Relation
rrenkert@4375: state.minfo.off_epoch = off. Epochs
rrenkert@4375: state.minfo.t_per_a = t/a
rrenkert@4375: state.minfo.m3_per_a = m\u00b3/a
raimund@3614: 
raimund@3614: year=Year
raimund@3614: epoch=Epoch
rrenkert@4375: off_epoch = off. Epochs
ingo@3783: soundings = Soundings / Epochs
bettina@5376: t_per_a = t/a
bettina@5376: m3_per_a = m\u00b3/a
ingo@2693: 
ingo@2187: historical.mode.w = Waterlevel Analyse
ingo@2187: historical.mode.q = Discharge Analyse
ingo@128: 
ingo@157: calc.surface.curve = Water Level/Surface Curve
ingo@157: calc.flood.map = Flood Plain
ingo@157: calc.discharge.curve = State Discharge Curve/Stage Discharge Relation
ingo@157: calc.duration.curve = Duration Curve
rrenkert@4906: calc.discharge.longitudinal.section = W for userdefined Discharge
felix@1146: calc.w.differences = Differences
ingo@2118: calc.historical.discharge.curve = Historical Discharge Curve
raimund@2626: calc.reference.curve = Reference Curve
felix@4041: calc.extreme.curve = Extreme Curves
raimund@2651: calc.fixation.default = Fixation
felix@3446: calc.fixation.vollmer = Balanced Waterlevel
ingo@2693: calc.bed.middle = Middle Bed Height
ingo@2693: calc.bed.diff = Bed Height Difference
ingo@2693: calc.bed.quality = Bed Quality
ingo@2693: calc.sediment.load = Sediment Load
ingo@2693: calc.flow.velocity = Flow Velocity
ingo@2693: calc.sq.relation = Load Discharge Relation
raimund@3631: calc.bed.d90 = D90
raimund@3631: calc.bed.d84 = D84
raimund@3631: calc.bed.d80 = D80
raimund@3631: calc.bed.d75 = D75
raimund@3631: calc.bed.d70 = D70
raimund@3631: calc.bed.d60 = D60
raimund@3631: calc.bed.d50 = D50
raimund@3631: calc.bed.d40 = D40
raimund@3631: calc.bed.d30 = D30
raimund@3631: calc.bed.d25 = D25
raimund@3631: calc.bed.d20 = D20
raimund@3631: calc.bed.d16 = D16
raimund@3631: calc.bed.d10 = D10
felix@7632: calc.bed.dm = dm
raimund@3631: calc.bed.dmin = Dmin
raimund@3631: calc.bed.dmax = Dmax
raimund@3631: calc.bed.dmid = Dmid
raimund@2626: 
raimund@2720: calculation.analysis = Fixinganalysis
felix@3448: calculation.vollmer = relocated Waterlevel Calculation
raimund@2720: 
raimund@2113: state.chart.river = River
raimund@2113: state.chart.type = Charttype
christian@4021: state.chart.km = Kilometer
raimund@2113: 
raimund@2113: chart.new.durationcurve = Duration Curve
raimund@2113: chart.new.computeddischargecurve = Discharge Curve
raimund@2153: chart.new.longitudinal_section = Longitudinal Section
raimund@2113: chart.new.w_differences = Differences
raimund@2153: chart.new.crosssection = Cross Section
raimund@2113: 
felix@1111: cross_section = Cross Section
felix@1111: 
felix@2251: reference_curve = Reference Curve
felix@2298: reference_curve_normalized = Normalized Reference Curve
felix@2251: 
ingo@927: scenario.current = Current
ingo@927: scenario.potentiel = Potentiel
ingo@927: scenario.scenario = Scenario
ingo@927: 
ingo@927: floodplain.option = Use Floodplain?
ingo@2579: floodplain.active = Activ
ingo@2579: floodplain.inactive = Inactiv
ingo@927: 
rrenkert@5397: outlier.method.grubbs=Grubbs
tom@6896: outlier.method.std-dev=Residual standard error
rrenkert@5397: 
ingo@128: river = River
ingo@128: calculation_mode = Calculation Mode
ingo@387: ld_locations = Location(s)
ingo@3759: main_channel = Main channel
ingo@3759: total_channel = Total channel
ingo@408: 
felix@1125: chart.cross_section.title = Cross Section for river {0}
felix@1125: chart.cross_section.subtitle = {0}-km: {1,number,#.###}
felix@1125: chart.cross_section.xaxis.label = Distance [m]
felix@5132: chart.cross_section.yaxis.label = W [{0}]
felix@1125: 
ingo@408: chart.longitudinal.section.title = W-Longitudinal Section
ingo@457: chart.longitudinal.section.subtitle = Range: {0}-km {1,number,#.###} - {2,number,#.###}
raimund@2159: chart.longitudinal.section.shortsubtitle = {0}
aheinecke@7105: chart.longitudinal.section.locsubtitle = {0} km {1,number,#.###}
ingo@1667: chart.longitudinal.section.xaxis.label = {0}-km
ingo@1667: chart.longitudinal.section.yaxis.label = W [{0}]
ingo@408: chart.longitudinal.section.yaxis.second.label = Q [m\u00b3/s]
felix@1041: chart.longitudinal.annotations.label = {0}.km
ingo@408: chart.discharge.curve.title = Discharge Curve
ingo@408: chart.discharge.curve.xaxis.label = Q [m\u00b3/s]
rrenkert@8355: chart.discharge.curve.yaxis.label = W [{0}]
rrenkert@8355: chart.discharge.curve.yaxis.cm.label = W [cm]
ingo@454: chart.discharge.curve.curve.valid.from = {0} (valid from {1,date,short})
ingo@454: chart.discharge.curve.curve.valid.range = {0} (valid from {1,date,short} - {2,date,short})
ingo@408: chart.computed.discharge.curve.title = Discharge Curve
tom@8387: chart.discharge.curve.subtitle = {0}-km: $KM
tom@8435: chart.discharge.curve.model = Model discharge curve {0} {1,date,medium} - {2,date,medium}
tom@8435: chart.discharge.curve.model.nostop = Model discharge curve {0} {1,date,medium} -
felix@5420: chart.computed.discharge.curve.yaxis.label = W [{0}]
ingo@456: chart.computed.discharge.curve.curve.label = Discharge Curve {0} km {1}
ingo@408: chart.duration.curve.title = Duration Curve
ingo@414: chart.duration.curve.subtitle = {0}-km: {1,number,#.###}
ingo@408: chart.duration.curve.xaxis.label = Duration of Non-Exceedence [Days]
tom@8432: chart.duration.curve.yaxis.label.w = W [{0}]
tom@8432: chart.duration.curve.yaxis.label.q = Q [m\u00b3/s]
felix@2718: chart.duration.curve.curve.w = Waterlevel duration curve for {0} (km: {1})
felix@2718: chart.duration.curve.curve.q = Discharge duration curve for {0} (km: {1})
ingo@2249: chart.historical.discharge.title = Historical Discharge Curves for Gauge {0}
ingo@4152: chart.historical.discharge.subtitle = Gauge {0} {1,date,medium} - {2,date,medium}
ingo@2249: chart.historical.discharge.xaxis.label = Time
aheinecke@6018: chart.historical.discharge.yaxis.second.label = Q [m\u00b3/s]
aheinecke@6018: chart.historical.discharge.yaxis.label = W [cm]
weinzierl@4257: chart.historical.discharge.wq.title = Discharge Curves
weinzierl@4257: chart.historical.discharge.wq.xaxis.label = Q [m\u00b3/s]
weinzierl@4257: chart.historical.discharge.wq.yaxis.label = W [cm]
felix@1702: 
felix@2263: chart.reference.curve.title = Reference Curve
felix@2263: chart.reference.curve.subtitle = {0}
felix@2263: 
sascha@3423: chart.fixings.analysis.title = Longitudinal section at km {0}
christian@3409: chart.fixings.wq.subtitle=River: {0}; Range: {1,date,short} to {2,date,short}; Reference period: {3,date,short} to {4,date,short}
christian@3410: chart.fixings.wq.subtitle1={0,date,short} to {1,date,short}
christian@3406: 
tom@8376: chart.fixings.derivedcurve.title = Derived curve
sascha@3423: chart.fixings.deltawt.title = Differences from fitted curve at km {0}
sascha@3423: chart.fixings.wq.title = Fixings Analysis at km {0}
felix@6461: chart.fixings.wq.yaxis.label = W [{0}]
sascha@3423: 
felix@6470: chart.extreme.wq.yaxis.label = W [{0}]
felix@6470: 
sascha@2407: chart.reference.curve.x.axis.in.cm = Reference Gauge(s) [cm]
felix@3569: chart.reference.curve.x.axis.in.m = Reference Station [NN + m]
sascha@2407: chart.reference.curve.y.axis.in.cm = Target Gauge(s) [cm]
tom@8788: chart.reference.curve.y.axis.in.m = Target Station(s) [NN + m]
sascha@2407: 
sascha@2408: chart.normalized.reference.curve.title = Reduced Reference Curve
sascha@2408: 
felix@1702: chart.w_differences.title = Differences
aheinecke@7115: chart.w_differences.subtitle = {0}
felix@1702: chart.w_differences.yaxis.label = m
felix@1702: chart.w_differences.yaxis.second.label = W [NN + m]
felix@1702: 
ingo@3757: chart.bedquality.title=Bed Longitudinal Section
felix@6165: chart.bedquality.xaxis.label={0}-km
tom@8260: chart.bedquality.yaxis.label.diameter = Diameter [mm]
ingo@3757: chart.bedquality.yaxis.label.porosity=Porosity [%]
ingo@3757: chart.bedquality.yaxis.label.density=Density [t/m\u00b3]
ingo@3757: 
felix@3930: chart.bedheight_middle.section.title=Middle Bed Height
felix@6169: chart.bedheight_middle.section.yaxis.label=middle Bed Height [{0}]
felix@7476: chart.bedheight_middle.sounding.yaxis.label=Sounding Width [m]
felix@3932: 
tom@8267: meta.bedheight.year = Year
tom@8267: meta.bedheight.type = Type
tom@8267: meta.bedheight.cur.elevation = Current elevation model
tom@8267: meta.bedheight.old.elevation = Old elevation model
tom@8267: meta.bedheight.range = Range
tom@8267: meta.bedheight.location.system = Location system
tom@8267: meta.bedheight.evalby = Evaluated by
tom@8267: meta.bedheight.river.elevation = River elevation model
aheinecke@7591: 
felix@3932: chart.flow_velocity.section.title=Geschwindigkeit- und Schubspannung
felix@3932: chart.flow_velocity.section.yaxis.label=Speed v [m/s]
felix@7567: chart.flow_velocity.section.yaxis.second.label=Bottom shear stress [N/m\u00b2]
felix@3930: 
ingo@3115: chart.sq_relation.xaxis.label = Discharge [m\u00b3/s]
ingo@3115: chart.sq_relation.yaxis.label = Transport [kg/s]
tom@8407: chart.sq_relation_a.title = Fine material
tom@8407: chart.sq_relation_b.title = Sand (suspended)
tom@8407: chart.sq_relation_c.title = Sand (bed load)
tom@8407: chart.sq_relation_d.title = Fine/middle gravel
tom@8407: chart.sq_relation_e.title = Coarse gravel
tom@8407: chart.sq_relation_f.title = Total bed load
tom@8407: facet.sq_relation.curve = Potential (bed load {0,date} - {1,date})
tom@8407: facet.sq_relation.measurements = Bed load {0,date} - {1,date}
aheinecke@7236: facet.sq_relation.static_data = {0} to {1}
tom@8407: facet.sq_relation.outliers = Outliers pass {0}
tom@8407: facet.sq_relation.outlier.curve = Potential pass {0}
tom@8407: facet.sq_relation.outlier.measurement = bed load data pass {0}
ingo@3115: 
felix@7313: sedimentdensity = sediment density
felix@7308: coarse = Coarse gravel
felix@7308: sand = Sand
felix@7308: fine_middle = Fine/Mid. gravel
felix@7308: susp_sand = Susp. Sand
felix@7308: susp_sand_bed = Bed. part Susp.Sand
felix@7308: suspended_sediment = Sediment
felix@7363: total = Total load
felix@7308: 
rrenkert@4375: chart.sedimentload.ls.title = Sediment load
rrenkert@4375: chart.sedimentload.ls.xaxis.label = km
rrenkert@4375: chart.sedimentload.ls.yaxis.label.diff = [t/a]
tom@8115: 
tom@8788: facet.sedimentload.prefix.offcial = Official epoch :
tom@8142: facet.sedimentload.coarse = Coarse gravel - {0} [{1}]
tom@8142: facet.sedimentload.fine_middle = Fine/Mid. gravel - {0} [{1}]
tom@8142: facet.sedimentload.sand = Sand - {0} [{1}]
tom@8142: facet.sedimentload.susp_sand = Suspended sand - {0} [{1}]
tom@8142: facet.sedimentload.susp_sand_bed = Bed. part suspended sand - {0} [{1}]
tom@8142: facet.sedimentload.suspended_sediment = Suspended sediment - {0} [{1}]
tom@8142: facet.sedimentload.total = Total load (from database) - {0} [{1}]
tom@8142: facet.sedimentload.bed_load = Bed load (from database) - {0} [{1}]
tom@8142: facet.sedimentload.suspended_load = Suspended load (from database) - {0} [{1}]
tom@8172: facet.sedimentload.calc.total = Total load (calculated) - {0} [{1}]
tom@8172: facet.sedimentload.calc.bed_load = Bed load (calculated) - {0} [{1}]
tom@8432: facet.sedimentload.calc.bed_load_susp_sand = Bed building load (calculated) - {0} [{1}]
tom@8115: 
tom@8213: minfo.sedimentload.no.data = No sediment load data available
tom@8213: sedimentload.missing.fraction.coarse = Missing fraction coarse gravel - {0}
tom@8213: sedimentload.missing.fraction.fine_middle = Missing fraction fine/mid. gravel - {0}
tom@8213: sedimentload.missing.fraction.sand = Missing fraction sand - {0}
tom@8213: sedimentload.missing.fraction.susp_sand = Missing fraction suspended sand - {0}
tom@8213: sedimentload.missing.fraction.susp_sand_bed = Missing fraction bed. part suspended sand - {0}
tom@8213: sedimentload.missing.fraction.suspended_sediment = Missing fraction suspended sediment - {0}
tom@8213: sedimentload.missing.fraction.total = Missing fraction total load - {0}
tom@8213: sedimentload.missing.fraction.bed_load = Missing fraction bed load - {0}
tom@8213: sedimentload.missing.fraction.bed_load_susp_sand = Missing fraction bed building load - {0}
rrenkert@4375: 
felix@1049: facet.longitudinal_section.annotations = POIs
raimund@2626: facet.discharge_curves.mainvalues.q = Q (main values)
raimund@2626: facet.discharge_curves.mainvalues.w = W (main values)
rrenkert@7796: facet.w_differences = {0} - {1}
rrenkert@7796: facet.w_differences.raw = {0} - {1} (raw)
felix@5399: historical_discharge.mainvalues.q = Q Main Values
felix@5399: historical_discharge.mainvalues.w = W Main Values
felix@7534: facet.flow_velocity.model.mainchannel = Mainchannel {0}
felix@7534: facet.flow_velocity.model.totalchannel = Totalchannel {0}
felix@7567: facet.flow_velocity.model.tau = Bottom shear stress {0}
felix@7534: facet.flow_velocity.model.q = Q {0}
ingo@2706: facet.flow_velocity.mainchannel = v Mainchannel at {0}
felix@4470: facet.flow_velocity.discharge = Discharge at {0}
ingo@2706: facet.flow_velocity.totalchannel = v Totalchannel at {0}
felix@7567: facet.flow_velocity.tauchannel = Bottom shear stress Mainchannel at {0}
rrenkert@4671: facet.flow_velocity.mainchannel.raw = v Mainchannel at {0} (raw)
rrenkert@4671: facet.flow_velocity.totalchannel.raw = v Totalchannel at {0} (raw)
felix@7567: facet.flow_velocity.tauchannel.raw = Bottom shear stress Mainchannel at {0} (raw)
felix@7397: facet.flow_velocity.velocity = V {0}
felix@7397: facet.flow_velocity.waterlevel = Waterlevel {0}
ingo@2714: facet.bedheight_middle.single = Bed Height {0,number,####}
ingo@2714: facet.bedheight_middle.epoch = Bed Height Epoch {0,number,####} - {1,number,####}
ingo@3767: facet.bedquality.bed.porosity.toplayer = Porosity ({0,date} - {1,date}) ({2})
ingo@3767: facet.bedquality.bed.porosity.sublayer = Porosity ({0,date} - {1,date}) ({2})
ingo@3767: facet.bedquality.bed.density.toplayer = Density ({0,date} - {1,date}) ({2})
ingo@3767: facet.bedquality.bed.density.sublayer = Density ({0,date} - {1,date}) ({2})
ingo@3767: facet.bedquality.bed.diameter.toplayer = {0}_Bed ({1,date} - {2,date}) ({3})
ingo@3767: facet.bedquality.bed.diameter.sublayer = {0}_Bed ({1,date} - {2,date}) ({3})
andre@8587: facet.bedquality.bed.diameter.toplayer.data = {0} Bed ({1,date} - {2,date}) ({3}) - measurements
andre@8587: facet.bedquality.bed.diameter.sublayer.data = {0} Bed ({1,date} - {2,date}) ({3}) - measurements
andre@8587: facet.bedquality.bed.diameter.bedload.data = {0} Bedload - measurements
andre@8587: facet.bedquality.bed.diameter.bedload = {0}_Bedload
andre@8592: facet.bedquality.interpol.suffix = - interpolated
ingo@3767: bedquality.toplayer = 0.0m - 0.3m
ingo@3767: bedquality.sublayer = 0.1m - 0.5m
tom@8685: bedquality.missing.diameter.bedload = Interpolating bedload diameter {0} on this range in {1,date} - {2,date} not possible.
tom@8685: bedquality.missing.diameter.sublayer = Interpolating bed diameter {0} (0.0 m - 0.3 m) on this range in {1,date} - {2,date} not possible.
tom@8685: bedquality.missing.diameter.toplayer = Interpolating bed diameter {0} (0.1 m - 0.5 m) on this range in {1,date} - {2,date} not possible.
tom@8685: bedquality.missing.density.toplayer = Interpolating density (0.0 m - 0.3 m) on this range in {1,date} - {2,date} not possible.
tom@8685: bedquality.missing.density.sublayer = Interpolating density (0.1 m - 0.5 m) on this range in {1,date} - {2,date} not possible.
tom@8685: bedquality.missing.porosity.toplayer = Interpolating porosity (0.0 m - 0.3 m) on this range in {1,date} - {2,date} not possible.
tom@8685: bedquality.missing.porosity.sublayer = Interpolating porosity (0.1 m - 0.5 m) on this range in {1,date} - {2,date} not possible.
raimund@3901: facet.bedheight.diff.year = Bedheight Difference {0}
felix@7476: facet.bedheight.sounding_width = Sounding Width ({0})
rrenkert@7832: facet.bedheight.diff.sounding = sounding Width
raimund@3901: facet.bedheight.diff.height1 = Original Height Minuend {0}
raimund@3901: facet.bedheight.diff.height2 = Original Height Subtrahend {0}
rrenkert@7832: facet.bedheight.diff.morph1 = Morph. active width minuend
rrenkert@7832: facet.bedheight.diff.morph2 = Morph. active width subtrahend
raimund@3901: facet.bedheight.diff.absolute = Bedheight Difference/Year {0}
raimund@3901: facet.bedheight.diff.epoch = Bedheight Difference {0}
rrenkert@4675: facet.bedheight.diff.year.raw = Bedheight Difference {0} (raw)
felix@6090: facet.bedheight.diff.height.raw = {0} (raw)
rrenkert@4675: facet.bedheight.diff.height1.raw = Original Height Minuend {0} (raw)
rrenkert@4675: facet.bedheight.diff.height2.raw = Original Height Subtrahend {0} (raw)
rrenkert@4675: facet.bedheight.diff.absolute.raw = Bedheight Difference/Year {0} (raw)
rrenkert@4675: facet.bedheight.diff.epoch.raw = BedHeight Difference {0} (raw)
bjoern@4033: facet.gauge_discharge_curve.river = Name of the river
bjoern@4033: facet.gauge_discharge_curve.reference_gauge = Gauge official number
bjoern@4164: facet.gauge_discharge_curve.gauge_name = Name of the gauge
bjoern@4191: facet.gauge_discharge_curve.gauge_location = Location of the gauge
rrenkert@5768: facet.morphologic.width = morphologic Width
raimund@3901: 
tom@7878: facet.porosity = {0}
tom@7878: 
raimund@3901: chart.beddifference.height.title = Bedheight Difference
felix@6165: chart.beddifference.height.xaxis.label = {0}-km
raimund@3901: chart.beddifference.height.yaxis.label = Difference [cm/year]
raimund@3901: chart.beddifference.epoch.title = Bedheight Difference
felix@6165: chart.beddifference.xaxis.label = {0}-km
felix@6863: chart.beddifference.yaxis.label.diff = Difference [cm]
raimund@3901: chart.beddifference.yaxis.label.height = Absolute Height [m]
raimund@3901: chart.beddifference.year.title = Bedheight Difference
rrenkert@5768: chart.beddifference.yaxis.label.morph = Width [m]
raimund@3901: chart.beddifference.yaxis.label.heights = Absolute Height [m]
tom@8737: chart.subtitle.radius = Width of sample window for moving average
ingo@416: 
tom@8179: export.csv.header.km = km
tom@8179: export.csv.header.year = year
tom@8179: 
ingo@416: export.waterlevel.csv.header.km = River-Km
felix@5133: export.waterlevel.csv.header.w = W [{0}]
ingo@416: export.waterlevel.csv.header.q = Q [m\u00b3/s]
ingo@2067: export.waterlevel.csv.header.q.desc = Description
ingo@2067: export.waterlevel.csv.header.location = Location
ingo@2067: export.waterlevel.csv.header.gauge = Reference Gauge
ingo@2045: export.waterlevel.csv.meta.result = # Calculation Output - {0} - Waterlevel - FLYS 3
ingo@2045: export.waterlevel.csv.meta.creation = # Time of creation: {0}
ingo@2045: export.waterlevel.csv.meta.calculationbase = # Calculation base: {0}
ingo@2045: export.waterlevel.csv.meta.river = # River: {0}
ingo@2045: export.waterlevel.csv.meta.range = # Location/Range (km): {0} - {1}
ingo@2045: export.waterlevel.csv.meta.gauge = # Gauge: {0}
ingo@2423: export.waterlevel.csv.meta.q = # Q (m\u00b3/s): {0}
ingo@2045: export.waterlevel.csv.meta.w = # W (NN + m): {0} - {1}
ingo@2067: export.waterlevel.csv.not.in.gauge.range = Outside selected gauge
felix@5420: export.computed.discharge.curve.csv.header.w = W [{0}]
ingo@416: export.computed.discharge.curve.csv.header.q = Q [m\u00b3/s]
ingo@416: export.duration.curve.csv.header.duration = D [Days]
felix@5420: export.duration.curve.csv.header.w = W [{0}]
ingo@416: export.duration.curve.csv.header.q = Q [m\u00b3/s]
ingo@416: export.discharge.longitudinal.section.csv.header.km = River-Km
ingo@416: export.discharge.longitudinal.section.csv.header.w = W [NN + m]
felix@4964: export.discharge.longitudinal.section.csv.header.cw = W corr. [NN + m]
ingo@416: export.discharge.longitudinal.section.csv.header.q = Q [m\u00b3/s]
aheinecke@6325: export.discharge.curve.at.header = Computed discharge curve for {0} {0}-km: {1}
aheinecke@6325: export.discharge.curve.at.gauge.header = Dischargetable for {1}/{0} since {2} datum[{4}] = {3}
ingo@2258: export.historical.discharge.csv.header.timerange = Timerange
ingo@4175: export.historical.discharge.csv.header.waterlevel = Waterlevel [cm]
ingo@4175: export.historical.discharge.csv.header.discharge = Discharge [m\u00b3/s]
felix@7566: export.historical.discharge.csv.header.diff.q = \u0394Q to reference[m\u00b3/s]
felix@7566: export.historical.discharge.csv.header.diff.w = \u0394W to reference[m\u00b3/s]
felix@5332: export.historical.discharge.csv.header.gaugename = Gauge
felix@2566: export.reference_curve.csv.header.km = km
felix@2566: export.reference_curve.csv.header.w.cm = W (cm at Gauge)
felix@2566: export.reference_curve.csv.header.w.m = W (m + NHN)
raimund@2631: export.reference_curve.csv.header.w.q = equiv. Q (m\u00b3/s)
ingo@954: 
raimund@2176: export.waterlevel.pdf.mode = Waterlevel
aheinecke@6305: export.computed.discharge.pdf.mode = Dischargecurve
aheinecke@6305: export.computed.discharge.pdf.calc.mode = Computed Dischargecurve
raimund@2185: export.duration.pdf.mode = Durationcurve
raimund@2185: export.wdifferences.pdf.mode = W Differences
raimund@2286: export.historical.discharge.pdf.mode = Historical Discharge
raimund@2310: export.reference_curve.pdf.mode = Reference Curve
raimund@2185: export.computed.discharge.pdf.file = /jasper/computed-discharge_en.jasper
raimund@2185: export.duration.pdf.file = /jasper/duration_en.jasper
raimund@2185: export.waterlevel.pdf.file = /jasper/waterlevel_en.jasper
raimund@2185: export.wdifferences.pdf.file = /jasper/wdifferences_en.jasper
raimund@2286: export.historical.discharge.pdf.file = /jasper/historical-discharge_en.jasper
raimund@2310: export.reference_curve.pdf.file = /jasper/reference_en.jasper
raimund@2631: export.reference_curve.pdf.file.gauge = /jasper/reference_en_gauge.jasper
raimund@2631: export.reference_curve.pdf.file.gauge.end = /jasper/reference_en_gauge_end.jasper
raimund@2631: export.reference_curve.pdf.file.gauge.start.end = /jasper/reference_en_gauge_start_end.jasper
ingo@2703: export.flow_velocity.csv.header.km = River Km
ingo@2703: export.flow_velocity.csv.header.v_total = v Total Channel
ingo@2703: export.flow_velocity.csv.header.v_main = v Main Channel
felix@7567: export.flow_velocity.csv.header.tau_main = Bottom shear stress Main Channel
ingo@2703: export.flow_velocity.csv.header.q = Q [m\u00b3/s]
ingo@2703: export.flow_velocity.csv.header.locations = Location
ingo@2714: export.bedheight_middle.csv.header.km = River km
ingo@2714: export.bedheight_middle.csv.header.sounding = Sounding / Epoch
felix@7599: export.bedheight_middle.csv.header.height = middle Bed Height [{0}]
ingo@2714: export.bedheight_middle.csv.header.uncertainty = Uncertainty [m]
ingo@2714: export.bedheight_middle.csv.header.datagap = Data Gap
ingo@2714: export.bedheight_middle.csv.header.soundingwidth = Sounding Width [m]
ingo@2714: export.bedheight_middle.csv.header.locations = Location
tom@8179: 
tom@8179: export.sedimentload.csv.header.coarse = Coarse gravel [{0}]
tom@8179: export.sedimentload.csv.header.fine_middle = Fine/Mid. gravel [{0}]
tom@8179: export.sedimentload.csv.header.sand = Sand [{0}]
tom@8179: export.sedimentload.csv.header.susp_sand = Suspended sand [{0}]
tom@8179: export.sedimentload.csv.header.susp_sand_bed = Bed. part suspended sand [{0}]
tom@8179: export.sedimentload.csv.header.suspended_sediment = Suspended sediment [{0}]
tom@8179: export.sedimentload.csv.header.total = Total load [{0}]
tom@8179: export.sedimentload.csv.header.bed_load = Bed load [{0}]
tom@8432: export.sedimentload.csv.header.bed_load_susp_sand = Bed building load [{0}]
tom@8179: 
tom@7937: export.sqrelation.csv.info.coeff.a = a: coefficient of transport curve
tom@7937: export.sqrelation.csv.info.coeff.b = b: exponent of transport curve
tom@7937: export.sqrelation.csv.info.qmax = Q max, measured: maximum measured discharge [m\u00b3/s]
tom@7965: export.sqrelation.csv.info.stderr = standard error: natural logarithm of standard deviation
tom@7937: export.sqrelation.csv.info.r2 = r^2: coefficient of determination
tom@7937: export.sqrelation.csv.info.ntot = n total: number of measurements
tom@7937: export.sqrelation.csv.info.noutl = n outliers: number of outliers
tom@7937: export.sqrelation.csv.info.cferguson = CFERGUSON: bias correction (Ferguson, 1986)
tom@7937: export.sqrelation.csv.info.cduan = CDUAN: bias correction (Duan, 1983)
tom@7937: export.sqrelation.csv.info.param.a = Parameter A: transport of fine material (< 0.063 mm)
tom@7937: export.sqrelation.csv.info.param.b = Parameter B: transport of suspended sand (0.063-2 mm)
tom@7937: export.sqrelation.csv.info.param.c = Parameter C: transport of sand (0.063-2 mm)
tom@7937: export.sqrelation.csv.info.param.d = Parameter D: transport of fine and medium gravel (2-16 mm)
tom@7937: export.sqrelation.csv.info.param.e = Parameter E: transport of coarse gravel (> Mittelkies)(16-125 mm)
tom@7937: export.sqrelation.csv.info.param.f = Parameter F: transport of bed load (0.063-125 mm)
andre@8628: export.sqrelation.csv.info.q = Q: Discharge in [m\u00b3/s] as measured on measurement date
andre@8628: export.sqrelation.csv.info.s_kg = S: Transport in [kg/s] as measured on measurement date
andre@8628: export.sqrelation.csv.info.date = Measurement Date: The date this measurment was made
ingo@3077: export.sqrelation.csv.header.parameter = Parameter
ingo@3077: export.sqrelation.csv.header.station = Station
ingo@3077: export.sqrelation.csv.header.km = River-Km
ingo@3077: export.sqrelation.csv.header.function = Function
ingo@3077: export.sqrelation.csv.header.gauge = Gauge
ingo@3077: export.sqrelation.csv.header.coeff.a = a
ingo@3077: export.sqrelation.csv.header.coeff.b = b
ingo@3077: export.sqrelation.csv.header.coeff.q = Q
ingo@3077: export.sqrelation.csv.header.coeff.r = r^2
ingo@3077: export.sqrelation.csv.header.n.total = n total
ingo@3077: export.sqrelation.csv.header.n.outliers = n outliers
aheinecke@6828: export.sqrelation.csv.header.c.duan = C (Duan)
aheinecke@6828: export.sqrelation.csv.header.c.ferguson = C (Ferguson)
aheinecke@6828: export.sqrelation.csv.header.sd = Standard error
tom@7932: export.sqrelation.csv.header.qmax = Q max, measured [m\u00b3/s]
andre@8542: export.sqrelation.csv.header.s_kg = S [kg/s]
andre@8542: export.sqrelation.csv.header.q = Q [m\u00b3/s]
andre@8541: export.sqrelation.csv.header.date = Measurement date
aheinecke@6172: export.sqrelation.pdf.file = /jasper/sqrelation_en.jasper
andre@8578: export.sqrelation.measurements.pdf.file = /jasper/sqmeasurements_en.jasper
aheinecke@6172: export.sqrelation.pdf.mode = Load Discharge Relation
raimund@3884: export.minfo.bedquality.km = km
andre@8587: export.minfo.bedquality.density.toplayer = Density Toplayer [t/m\u00b3]
andre@8587: export.minfo.bedquality.density.sublayer = Density Sublayer [t/m\u00b3]
andre@8587: export.minfo.bedquality.porosity.toplayer = Porosity Toplayer [%]
andre@8587: export.minfo.bedquality.porosity.sublayer = Porosity Sublayer [%]
andre@8587: export.minfo.bedquality.diameter.bedload = Bedload Diameter [mm]
andre@8587: export.minfo.bedquality.diameter.toplayer = Bed Diameter Toplayer [mm]
andre@8587: export.minfo.bedquality.diameter.sublayer = Bed Diameter Sublayer [mm]
rrenkert@6220: export.minfo.beddifference.km = km
tom@7906: export.minfo.beddifference.diff = Bedheight Difference [cm]
teichmann@7913: export.minfo.beddifference.diff.pair = Difference pair
aheinecke@6242: export.minfo.beddifference.pdf.file = /jasper/beddifference_en.jasper
aheinecke@6242: export.minfo.beddifference.pdf.title = Bedheight Difference
aheinecke@6242: export.minfo.beddifference.pdf.mode = Bedheight Difference
rrenkert@8423: export.minfo.beddifference.sounding1 = Sounding width minuend [m]
rrenkert@8423: export.minfo.beddifference.sounding2 = Sounding width subtrahend [m]
rrenkert@8423: export.minfo.beddifference.gap1 = Data gap minuend [%]
rrenkert@8423: export.minfo.beddifference.gap2 = Data gap subtrahend [%]
raimund@2176: 
ingo@954: floodmap.wmsbackground = Background Map
ingo@954: floodmap.riveraxis = River Axis
teichmann@6988: floodmap.uesk = Floodmap: {0}-km {1,number,####} - {2,number,####} - {3}
ingo@1638: floodmap.barriers = Digitized Objects
ingo@1805: floodmap.kms = Kilometrage
ingo@1836: floodmap.qps = Crosssection Tracks
ingo@1855: floodmap.hws = Flood Control Works
aheinecke@5580: floodmap.hws.lines.official = Official Flood Control Works
aheinecke@5580: floodmap.hws.points.official = Official Flood Control Works (points)
ingo@1856: floodmap.catchment = Catchment
ingo@1857: floodmap.floodplain = Floodplain
ingo@1870: floodmap.lines = Lines
ingo@1873: floodmap.buildings = Buildings
ingo@1873: floodmap.fixpoints = Fixpoints
ingo@2581: floodmap.floodmaps = Floodmaps
raimund@2639: floodmap.usershape = User data
christian@6244: floodmap.isobath.class = {0,number,#.#} m to {1,number,#.#} m
christian@6244: floodmap.isobath.lastclass = greater {0,number,#.#} m
ingo@1165: 
ingo@1165: wsplgen.job.queued = WSPLGEN job in queue.
ingo@1168: wsplgen.job.error = An unexpected error while starting WSPLGEN occured.
ingo@1180: 
teichmann@6510: official.line.found = Found official line for {0} from year {1,date,yyyy} from {2}.
teichmann@6501: 
ingo@1180: wsp.selected.string = {0}
felix@1889: 
felix@1889: Mosel = Mosel
felix@1889: Saar = Saar
felix@1889: Elbe = Elbe
felix@1889: 
raimund@2089: state.map.river = River
raimund@2089: 
sascha@2166: spline.interpolation.failed = Spline interpolation failed.
sascha@2166: cannot.find.w.for.q = Cannot find W for Q = {0,number,#.##}.
sascha@2166: cannot.find.q = Cannot find Q = {0,number,#.##}.
sascha@2166: no.ws.found = No Ws found.
sascha@2166: no.q.found.in.column = No Q found in {0,integer} column.
sascha@2166: spline.creation.failed = Spline creation failed.
sascha@2166: cannot.find.w.or.q = Cannot find W or Q.
sascha@2166: km.not.found = Cannot find km.
sascha@2166: cannot.create.wq.relation = Cannot create W/Q relation.
sascha@2166: cannot.create.index.q.relation = Cannot create index/Q relation.
ingo@2330: 
ingo@2330: w.w.qkm1.failed = Calculating Q for WST index {0,number,#.##} failed.
sascha@2403: w.w.wkm1.failed = Calculating W for Q = {0,number,#.##} /  WST index {1,number,#.##} failed.
ingo@2330: w.w.qkm2.failed = Calculating Q for WST index {0,number,#.##} failed.
sascha@2403: w.w.wkm2.failed = Calculating W for Q = {0,number,#.##} /  WST index {1,number,#.##} failed.
ingo@2330: 
tom@8247: hist.discharge.no.value.in.ref = {0} {1} not in reference table
ingo@2244: cannot.find.hist.q.for.w = Cannot find Q for W = {0,number,#.##} in timerange {1, date} - {2, date}
ingo@4232: cannot.find.hist.w.for.q = Cannot find W for Q = {0,number,#.##} in timerange {1, date} - {2, date}
ingo@2304: cannot.find.hist.q.tables = Cannot find Discharge Tables for given timerange.
ingo@2311: cannot.find.hist.q.reftable = Cannot find reference Discharge Table for specified Gauge.
sascha@2166: 
sascha@2624: more.than.one.q.for.w = Found more Qs for W = {0,number,#.##}.
sascha@2624: 
felix@4367: extreme_wq_curve = Curve for extreme WQ
felix@4367: extreme_wq_base_curve = Measurement basis for extreme WQ
felix@4367: 
sascha@2166: no.river.selected = No river selected.
sascha@2166: no.gauge.selected = No gauge selected.
sascha@2166: no.locations.selected = No locations selected.
sascha@2166: no.kms.selected = No KMs selected.
sascha@2166: converting.ws.to.qs.failed = Converting Ws to Qs failed.
sascha@2166: no.wst.for.river = No WST found for selected river.
sascha@2166: no.range.found = No range found.
felix@5791: no.gauge.found.for.km = No gauge found for KM {0}.
sascha@2166: cannot.create.segments = Cannot create segments.
sascha@2166: cannot.compute.discharge.curve = Cannot create discharge curve.
sascha@2166: cannot.find.ds = Cannot find Ds.
sascha@2166: no.segments.found = No segments found.
sascha@2166: no.values.given = No values given.
sascha@2294: cannot.interpolate.w.q = Cannot interpolate W/Q.
felix@2181: 
felix@2181: manualpoints = Manual Points
sascha@2194: 
sascha@2194: no.reference.start.km = No reference start station given.
sascha@2194: no.reference.end.kms = No reference end station(s) given.
felix@2313: waterlevels = Waterlevels
sascha@2194: 
teichmann@5704: help.index=${help.url}/OnlineHilfe
teichmann@5704: help.state.winfo=${help.url}/OnlineHilfe/WINFO
teichmann@5704: help.state.winfo.river=${help.url}/OnlineHilfe/WINFO#help.state.winfo.river
teichmann@5704: help.state.winfo.calculation_mode=${help.url}/OnlineHilfe/WINFO#help.state.winfo.calculation_mode
teichmann@5704: help.state.winfo.location=${help.url}/OnlineHilfe/WINFO#help.state.winfo.location
teichmann@5704: help.state.winfo.distance_only=${help.url}/OnlineHilfe/WINFO#help.state.winfo.distance_only
teichmann@5704: help.state.winfo.distance=${help.url}/OnlineHilfe/WINFO#help.state.winfo.distance
teichmann@5704: help.state.winfo.location_distance=${help.url}/OnlineHilfe/WINFO#help.state.winfo.location_distance
teichmann@5704: help.state.winfo.wq=${help.url}/OnlineHilfe/WINFO#help.state.winfo.wq
teichmann@5704: help.state.winfo.wq_adapted=${help.url}/OnlineHilfe/WINFO#help.state.winfo.wq_adapted
teichmann@5704: help.state.winfo.waterlevel_pair_select=${help.url}/OnlineHilfe/WINFO#help.state.winfo.waterlevel_pair_select
teichmann@5704: help.state.winfo.reference.curve.input.start=${help.url}/OnlineHilfe/WINFO#help.state.winfo.reference.curve.input.start
teichmann@5704: help.state.winfo.reference.curve.input.end=${help.url}/OnlineHilfe/WINFO#help.state.winfo.reference.curve.input.end
teichmann@5704: help.state.winfo.uesk.wsp=${help.url}/OnlineHilfe/WINFO#help.state.winfo.uesk.wsp
teichmann@5704: help.state.winfo.uesk.dgm=${help.url}/OnlineHilfe/WINFO#help.state.winfo.uesk.dgm
teichmann@5704: help.state.winfo.uesk.profiles=${help.url}/OnlineHilfe/WINFO#help.state.winfo.uesk.profiles
teichmann@5704: help.state.winfo.uesk.floodplain=${help.url}/OnlineHilfe/WINFO#help.state.winfo.uesk.floodplain
teichmann@5704: help.state.winfo.uesk.differences=${help.url}/OnlineHilfe/WINFO#help.state.winfo.uesk.differences
teichmann@5704: help.state.winfo.uesk.scenario=${help.url}/OnlineHilfe/WINFO#help.state.winfo.uesk.scenario
teichmann@5704: help.state.winfo.uesk.dc-hws=${help.url}/OnlineHilfe/WINFO#help.state.winfo.uesk.scenario
teichmann@5704: help.state.winfo.uesk.user-rgd=${help.url}/OnlineHilfe/WINFO#help.state.winfo.uesk.scenario
teichmann@5704: help.state.winfo.uesk.barriers=${help.url}/OnlineHilfe/WINFO#help.state.winfo.uesk.scenario
teichmann@5704: help.state.winfo.historicalq.reference_gauge=${help.url}/OnlineHilfe/WINFO#help.state.winfo.historicalq.reference_gauge
teichmann@5704: help.state.winfo.historicalq.timerange=${help.url}/OnlineHilfe/WINFO#help.state.winfo.historicalq.timerange
teichmann@5704: help.state.winfo.historicalq.mode=${help.url}/OnlineHilfe/WINFO#help.state.winfo.historicalq.mode
teichmann@5704: help.state.winfo.function_select=${help.url}/OnlineHilfe/WINFO#help.state.winfo.function_select
teichmann@5704: help.state.winfo.extreme.percent=${help.url}/OnlineHilfe/WINFO#help.state.winfo.extreme.percent
teichmann@5704: help.state.winfo.extreme.qinput=${help.url}/OnlineHilfe/WINFO#help.state.winfo.extreme.qinput
bettina@4834: 
teichmann@5704: help.state.minfo.river=${help.url}/OnlineHilfe/MINFO#help.state.minfo.river
teichmann@5704: help.state.minfo.calculation_mode=${help.url}/OnlineHilfe/MINFO#help.state.minfo.calculation_mode
teichmann@5704: help.state.minfo.distance_only=${help.url}/OnlineHilfe/MINFO#help.state.minfo.distance_only
andre@8564: help.state.minfo.distance=${help.url}/OnlineHilfe/MINFO#help.state.minfo.distance
teichmann@5704: help.state.minfo.bed.year_epoch=${help.url}/OnlineHilfe/MINFO#help.state.minfo.bed.year_epoch
teichmann@5704: help.state.minfo.sq.location=${help.url}/OnlineHilfe/MINFO#help.state.minfo.sq.location
teichmann@5704: help.state.minfo.bed.location=${help.url}/OnlineHilfe/MINFO#help.state.minfo.bed.location
teichmann@5704: help.state.minfo.dischargestate=${help.url}/OnlineHilfe/MINFO#help.state.minfo.dischargestate
teichmann@5704: help.state.minfo.soundings=${help.url}/OnlineHilfe/MINFO#help.state.minfo.soundings
teichmann@5704: help.state.minfo.bed.difference_select=${help.url}/OnlineHilfe/MINFO#help.state.minfo.bed.difference_select
teichmann@7955: help.state.minfo.sq.outliermethod=${help.url}/OnlineHilfe/MINFO#help.state.minfo.sq.outliermethod
teichmann@5704: help.state.minfo.sq.outliers=${help.url}/OnlineHilfe/MINFO#help.state.minfo.sq.outliers
teichmann@5704: help.state.minfo.sediment.load.year_epoch=${help.url}/OnlineHilfe/MINFO#help.state.minfo.sediment.load.year_epoch
teichmann@5704: help.state.minfo.sediment.load.location=${help.url}/OnlineHilfe/MINFO#help.state.minfo.sediment.load.location
teichmann@5704: help.state.minfo.bed.periods=${help.url}/OnlineHilfe/MINFO#help.state.minfo.bed.periods
teichmann@5704: help.state.minfo.bed.char_diameter=${help.url}/OnlineHilfe/MINFO#help.state.minfo.bed.char_diameter
teichmann@5704: help.state.minfo.sediment.load.period=${help.url}/OnlineHilfe/MINFO#help.state.minfo.sediment.load.period
teichmann@5704: help.state.minfo.sediment.load.epochs=${help.url}/OnlineHilfe/MINFO#help.state.minfo.sediment.load.epochs
teichmann@5704: help.state.minfo.sediment.load.off_epochs=${help.url}/OnlineHilfe/MINFO#help.state.minfo.sediment.load.off_epochs
teichmann@5704: help.state.minfo.sediment.load.unit=${help.url}/OnlineHilfe/MINFO#help.state.minfo.sediment.load.unit
teichmann@5704: help.state.minfo.sq.period=${help.url}/OnlineHilfe/MINFO#help.state.minfo.sq.period
bettina@4834: 
raimund@3049: 
raimund@3169: fix.reference.period=Reference period
raimund@3610: fix.reference.period.event=Reference event
raimund@3610: fix.reference.period.event.short=R
raimund@3610: fix.analysis.short=A
raimund@3169: fix.analysis.periods=Analysis periods
raimund@3049: fix.derivative=Derivative
raimund@3049: fix.outlier=Outlier
raimund@3610: fix.analysis=Analysis event
raimund@3135: fix.deviation=Standard deviation
raimund@3169: fix.reference.deviation=Reference deviation
felix@5336: fix.vollmer.wq.curve=Adjusted function
ingo@3466: fix.vollmer.wq.outliers=Outliers
ingo@3466: fix.vollmer.wq.events=Events
felix@3576: qsectors=Discharge Sectors
rrenkert@5380: fix.mnq=arround MNQ
rrenkert@5380: fix.mq=arraound MQ
rrenkert@5380: fix.mhq=arround MHQ
rrenkert@5380: fix.hq5=over HQ5
raimund@3135: 
christian@3406: chart.fix.deltawt.title=Difference from compensating curve at kilometer {0}
christian@3409: chart.fix.deltawt.subtitle=Water: {0}; Period:  {1,date,short} to {2,date,short}; Reference period: {3,date,short} bis {4,date,short}
raimund@3135: chart.fix.deltawt.xaxis.label=Date
raimund@3135: chart.fix.deltawt.yaxis.label=\u0394 W(t) [cm]
sascha@3159: 
christian@3406: 
christian@3406: chart.fixings.longitudinalsection.title=Longitudinal section
christian@3406: 
sascha@3397: export.fixings.deltawt.csv.header.km=km
sascha@3397: export.fixings.deltawt.csv.header.deltaw=\u0394 W [cm]
sascha@3397: export.fixings.deltawt.csv.header.q=Discharge [m\u00b3/s]
sascha@3402: export.fixings.deltawt.csv.header.w=Waterlevel [m]
sascha@3397: export.fixings.deltawt.csv.header.t=Date
sascha@3402: export.fixings.deltawt.csv.t.format=yyyy/MM/dd
sascha@3402: export.fixings.deltawt.csv.header.time.range=State
sascha@3402: export.fixings.deltawt.csv.reference=R
sascha@3402: export.fixings.deltawt.csv.analysis=A{0,number,integer}
sascha@3397: 
sascha@3159: fix.missing.river=Missing river
sascha@3159: fix.missing.from=Missing start km
sascha@3159: fix.missing.to=Missing end km
sascha@3159: fix.missing.step="Missing step width
sascha@3159: fix.missing.function=Missing function type
sascha@3159: fix.missing.events=Missing list of events
sascha@3159: fix.missing.reference.period=Missing reference period
sascha@3159: fix.missing.analysis.periods=Missing analysis periods
sascha@3159: fix.missing.qstart.sector=Missing discharge start sector
sascha@3159: fix.missing.qend.sector=Missing discharge end sector
sascha@3159: fix.missing.prepocessing=Missing info about preprocessing
sascha@3159: fix.no.overview.available=No overview available
sascha@3159: fix.invalid.function.name=Name of function unknown
sascha@3159: fix.too.less.data.colums=Too less data columns for calculation
sascha@3159: fix.fitting.failed=Fitting failed
sascha@3159: fix.invalid.values=Invalid values
sascha@3159: fix.cannot.load.data=Cannot fetch data from database
sascha@3170: 
teichmann@7546: fix.realize.missing.is.q=No Q value found
teichmann@7546: fix.realize.missing.segments=Missing values for gauges
teichmann@7546: fix.no.such.river=River not found
teichmann@7546: fix.cannot.find.segment=Outside of gauge ranges
teichmann@7546: fix.cannot.calculate.function=Evaluation of function failed
teichmann@7546: 
sascha@3170: fix.km.chart.q.sector.border0=(MNQ + MQ)/2
sascha@3170: fix.km.chart.q.sector.border1=(MQ + MHQ)/2
sascha@3170: fix.km.chart.q.sector.border2=HQ5
sascha@3170: fix.km.chart.label.date=yyyy/MM/dd
sascha@3170: fix.km.chart.title=Fixings {0} km {1,number,#.###}
sascha@3170: fix.km.chart.q.axis=Q [m\u00b3/s]
sascha@3170: fix.km.chart.w.axis=W [NN + m]
sascha@3173: fix.km.chart.measured=measured
sascha@3173: fix.km.chart.interpolated=interpolated
sascha@3220: 
sascha@3220: fix.export.at.header = Exported fixings discharge curve for {0} {0}-km: {1}
aheinecke@6325: fix.export.at.gauge.header = Exported fixings discharge curve for {0}, gauge: {1} datum[{3}] = {2}
raimund@3274: sq.km.chart.label = Measuring Points
raimund@3274: sq.km.chart.title = Measuring Points
raimund@3274: sq.km.chart.km.axis = km
raimund@3274: sq.km.chart.date.axis = Date
rrenkert@5502: static.sq.river = River
rrenkert@5502: static.sq.station = Station
raimund@3274: 
bettina@5555: module.winfo = W-INFO
bettina@5555: module.minfo = M-INFO
bjoern@3630: module.fixanalysis = Fix Analysis
bjoern@3630: module.new_map = New Map
bjoern@3630: module.new_chart = New Chart
ingo@3649: 
ingo@3649: load_diameter = Bedload Diameter
ingo@3649: bed_diameter = Bed Diameter
ingo@3785: 
ingo@3785: area.label.template = Area = %s m\u00b3
ingo@4213: 
ingo@4213: gauge.discharge.service.chart.title = Discharge Tables at Gauge {0}
ingo@4213: gauge.discharge.service.chart.x.title = Q [m\u00b3/s]
ingo@4213: gauge.discharge.service.chart.y.title = W [cm]
ingo@4213: gauge.discharge.service.chart.series.title = Discharge Curve {0,date,short} - {1,date,short}
felix@4408: gauge.discharge.service.chart.series.title.master = Current Discharge Curve since {0,date,short}
teichmann@4565: 
aheinecke@6162: bed.km.chart.label = Sedimentdata
aheinecke@6162: bed.km.chart.title = Sedimentdata SedDB
aheinecke@6162: bedload.km.chart.label = Geschiebedaten
aheinecke@6162: bedload.km.chart.title = Geschiebedatenbestand SedDB
aheinecke@6162: 
teichmann@5704: help.state.fix.river=${help.url}/OnlineHilfe/Fixierungsanalyse#help.state.fix.river
teichmann@5704: help.state.fix.calculation.mode=${help.url}/OnlineHilfe/Fixierungsanalyse#help.state.fix.calculation.mode
teichmann@5704: help.state.fix.location=${help.url}/OnlineHilfe/Fixierungsanalyse#help.state.fix.location
teichmann@5704: help.state.fix.period=${help.url}/OnlineHilfe/Fixierungsanalyse#help.state.fix.period
teichmann@5704: help.state.fix.gaugerange=${help.url}/OnlineHilfe/Fixierungsanalyse#help.state.fix.gaugerange
teichmann@5704: help.state.fix.eventselect=${help.url}/OnlineHilfe/Fixierungsanalyse#help.state.fix.eventselect
teichmann@5704: help.state.fix.analysis.referenceperiod=${help.url}/OnlineHilfe/Fixierungsanalyse#help.state.fix.analysis.referenceperiod
teichmann@5704: help.state.fix.analysis.analysisperiods=${help.url}/OnlineHilfe/Fixierungsanalyse#help.state.fix.analysis.analysisperiods
teichmann@5704: help.state.fix.analysis.function=${help.url}/OnlineHilfe/Fixierungsanalyse#help.state.fix.analysis.function
teichmann@5704: help.state.fix.analysis.preprocessing=${help.url}/OnlineHilfe/Fixierungsanalyse#help.state.fix.analysis.preprocessing
teichmann@5704: help.state.fix.analysis.compute=${help.url}/OnlineHilfe/Fixierungsanalyse#help.state.fix.analysis.compute
teichmann@5704: help.state.fix.vollmer.function=${help.url}/OnlineHilfe/Fixierungsanalyse#help.state.fix.vollmer.function
teichmann@5704: help.state.fix.vollmer.preprocessing=${help.url}/OnlineHilfe/Fixierungsanalyse#help.state.fix.vollmer.preprocessing
teichmann@5704: help.state.fix.vollmer.qs=${help.url}/OnlineHilfe/Fixierungsanalyse#help.state.fix.vollmer.qs
teichmann@5704: help.state.fix.vollmer.compute=${help.url}/OnlineHilfe/Fixierungsanalyse#help.state.fix.vollmer.compute
gernotbelger@8854: 
gernotbelger@8870: module.group.ingwerds = INGwerDs
gernotbelger@8870: # empty label, so it does not get a group-frame in the ui 
gernotbelger@8870: module.group.bottom = 
gernotbelger@8870: 
gernotbelger@8854: state.sinfo.river = River
gernotbelger@8854: state.sinfo.calculation_mode=Calculation Mode
gernotbelger@8854: 
gernotbelger@8854: sinfo_calc_flow_depth=Flie\u00dftiefen
gernotbelger@8854: sinfo_calc_flow_depth_development=Flie\u00dftiefenentwicklung
gernotbelger@8854: sinfo_calc_flow_depth_minmax=Minimale und Maximale Flie\u00dftiefe
gernotbelger@8854: sinfo_calc_grounding=Grundber\u00fchrungen
gernotbelger@8854: sinfo_calc_transport_bodies_heights=Transportk\u00f6rperh\u00f6hen
gernotbelger@8854: sinfo_calc_infrastructures_inundation_duration=\u00dcberflutungsdauern Infrastrukturen BWaStr
gernotbelger@8854: 
gernotbelger@8854: help.state.sinfo=${help.url}/OnlineHilfe/SINFO
gernotbelger@8854: help.state.sinfo.river=${help.url}/OnlineHilfe/SINFO#help.state.sinfo.river
gernotbelger@8854: help.state.sinfo.calculation_mode=${help.url}/OnlineHilfe/SINFO#help.state.sinfo.calculation_mode
gernotbelger@8854: 
gernotbelger@8854: state.sinfo.distance_only = Range selection
gernotbelger@8854: help.state.sinfo.distance_only=${help.url}/OnlineHilfe/SINFO#help.state.sinfo.distance_only
gernotbelger@8854: 
gernotbelger@8854: state.sinfo.waterlevel_soundings_select= Chosen Differences
gernotbelger@8854: help.state.sinfo.waterlevel_soundings_select=${help.url}/OnlineHilfe/SINFO#help.state.sinfo.waterlevel_soundings_select
gernotbelger@8854: 
gernotbelger@8854: state.sinfo.use_transport_bodies=Transportk\u00f6rperh\u00f6hen
gernotbelger@8854: help.state.sinfo.use_transport_bodies=${help.url}/OnlineHilfe/SINFO#help.state.sinfo.use_transport_bodies
gernotbelger@8854: 
gernotbelger@8854: useTransportBodies.option = Transportk\u00f6rperh\u00f6hen miteinbeziehen?
gernotbelger@8854: useTransportBodies.active = Activ
gernotbelger@8854: useTransportBodies.inactive = Inactiv
gernotbelger@8854: 
gernotbelger@8863: sinfo.export.flow_depth.csv.meta.header.result = ## {0} - {1} - {2}
gernotbelger@8863: sinfo.export.flow_depth.csv.meta.header.result.label = Calculation Output
gernotbelger@8863: sinfo.export.flow_depth.csv.meta.version = # {0}: {1}
gernotbelger@8863: sinfo.export.flow_depth.csv.meta.version.label = FLYS-Version
gernotbelger@8863: sinfo.export.flow_depth.csv.meta.user = # {0}: {1}
gernotbelger@8863: sinfo.export.flow_depth.csv.meta.user.label = Bearbeiter
gernotbelger@8863: sinfo.export.flow_depth.csv.meta.creation = # {0}: {1}
gernotbelger@8863: sinfo.export.flow_depth.csv.meta.creation.label = Time of creation
gernotbelger@8863: sinfo.export.flow_depth.csv.meta.river = # {0}: {1}
gernotbelger@8863: sinfo.export.flow_depth.csv.meta.river.label = Gew\u00e4sser
gernotbelger@8854: sinfo.export.flow_depth.csv.meta.header.sounding = ##METADATEN PEILUNG
gernotbelger@8854: sinfo.export.flow_depth.csv.meta.header.waterlevel = ##METADATEN WASSERSPIEGELLAGE
gernotbelger@8863: sinfo.export.flow_depth.csv.meta.range = # {0}: {1} - {2}
gernotbelger@8863: sinfo.export.flow_depth.csv.meta.range.label = Range (km)
gernotbelger@8863: sinfo.export.flow_depth.csv.meta.height_unit.river = # H\u00f6henbezugssystem des Flusses: {0} 
gernotbelger@8854: 
gernotbelger@8854: #export.export.flow_depth.csv.meta.gauge = # Gauge: {0}
gernotbelger@8854: #export.export.flow_depth.csv.meta.q = # Q (m\u00b3/s): {0}
gernotbelger@8854: #export.export.flow_depth.csv.meta.w = # W (NN + m): {0} - {1}
gernotbelger@8854: 
gernotbelger@8854: sinfo.export.flow_depth.csv.header.km = Fluss-km
gernotbelger@8863: sinfo.export.flow_depth.csv.header.flowdepth = Flie\u00dftiefe
gernotbelger@8863: sinfo.export.flow_depth.csv.header.flowdepthTkh = Flie\u00dftiefe mit TKH
gernotbelger@8863: sinfo.export.flow_depth.csv.header.tkh = TKH
gernotbelger@8863: sinfo.export.flow_depth.csv.header.waterlevel = Wasserstand
gernotbelger@8863: sinfo.export.flow_depth.csv.header.discharge = Q
gernotbelger@8854: sinfo.export.flow_depth.csv.header.label = Bezeichnung
gernotbelger@8854: sinfo.export.flow_depth.csv.header.gauge = Bezugspegel
gernotbelger@8863: sinfo.export.flow_depth.csv.header.mean_bed_height = Mittlere Sohlh\u00f6he
gernotbelger@8863: sinfo.export.flow_depth.csv.header.mean_bed_height.short = Mittlere Sohl-
gernotbelger@8854: sinfo.export.flow_depth.csv.header.sounding = Peilung/Epoche
gernotbelger@8854: sinfo.export.flow_depth.csv.header.location = Lage
gernotbelger@8854: 
gernotbelger@8854: sinfo.chart.flow_depth.section.title=h-L\u00e4ngsschnitt
gernotbelger@8854: 
gernotbelger@8854: sinfo.chart.flow_depth.xaxis.label = {0}-km
gernotbelger@8854: sinfo.chart.flow_depth.yaxis.label = Flie\u00dftiefe [m]
gernotbelger@8854: 
gernotbelger@8854: sinfo.chart.flow_depth.section.yaxis.label=Flie\u00dftiefe h [m]
gernotbelger@8854: sinfo.facet.flow_depth.filtered.description = Flie\u00dftiefe ({0})