# HG changeset patch
# User Andre Heinecke <aheinecke@intevation.de>
# Date 1369380130 -7200
# Node ID cdd9759b15b6745405c2d954f214695733274588
# Parent  4bd8bbbcdf688ada2b7c53800ee0ead643a7ecdf
Fix old calculations datacage parts.

    - Move the basdata waterlevels out of the user part into
    the non-recommendations and guard them against showing up
    in the inline datacage (state.winfo.uesk.wsp)
    - Add recommendation handling to the user specific part,
    currently only for official lines
    - Fix group expressions for heightmarks
    - Call for-each around the macro-body for basedata additionals
    to make the variables of the database statement available in that
    macro

diff -r 4bd8bbbcdf68 -r cdd9759b15b6 artifacts/doc/conf/meta-data.xml
--- a/artifacts/doc/conf/meta-data.xml	Thu May 23 18:14:31 2013 +0200
+++ b/artifacts/doc/conf/meta-data.xml	Fri May 24 09:22:10 2013 +0200
@@ -254,6 +254,15 @@
                       <dc:call-macro name="bed-heights-epoch"/>
                     </bedheights>
                   </dc:when>
+                  <dc:when test="$out = 'waterlevels'">
+                    <dc:if test="current-state-id != 'state.winfo.uesk.wsp'">
+                      <dc:call-macro name="basedata_0"/>
+                      <dc:call-macro name="basedata_1_additionals"/>
+                      <dc:call-macro name="basedata_2_fixations"/>
+                      <dc:call-macro name="basedata_4_heightmarks-points"/>
+                      <dc:call-macro name="basedata_5_flood-protections"/>
+                    </dc:if>
+                  </dc:when>
                 </dc:choose>
               </dc:iterate>
             </dc:otherwise>
@@ -265,102 +274,115 @@
     <dc:macro name="generate-user-content">
       <dc:call-macro name="user-range">
         <dc:call-macro name="km-filtered-userdata">
-          <dc:iterate var="out" container="artifact-outs">
-            <dc:choose>
-              <dc:when test="$out = 'longitudinal_section'">
-                <dc:call-macro name="longitudinal"/>
-                <dc:call-macro name="differences"/>
-                <dc:call-macro name="officiallines_user"/>
-              </dc:when>
-              <dc:when test="$out = 'discharge_longitudinal_section'">
-                <dc:call-macro name="longitudinal"/>
-                <dc:call-macro name="differences"/>
-              </dc:when>
-              <dc:when test="$out = 'w_differences'">
-                <dc:call-macro name="longitudinal"/>
-                <dc:call-macro name="differences"/>
-              </dc:when>
-              <dc:when test="$out = 'fix_deltawt_curve'">
-                <dc:call-macro name="delta-wt"/>
-              </dc:when>
-              <dc:when test="$out = 'reference_curve'">
-                <dc:call-macro name="reference-curves"/>
-              </dc:when>
-              <dc:when test="$out = 'computed_discharge_curve'">
-                <dc:call-macro name="computed-discharge-curve"/>
-              </dc:when>
-              <dc:when test="$out = 'cross_section'">
-                <dc:call-macro name="waterlevels"/>
-              </dc:when>
-              <dc:when test="$out = 'fix_longitudinal_section_curve'">
-                <dc:call-macro name="longitudinal-section"/>
-              </dc:when>
-              <dc:when test="$out = 'fix_derivate_curve'">
-                <dc:call-macro name="fix-derivate-curve"/>
-              </dc:when>
-              <dc:when test="$out = 'fix_wq_curve'">
-                <dc:call-macro name="fix-wq-curve"/>
-              </dc:when>
-              <dc:when test="$out = 'duration_curve'">
-                <dc:call-macro name="duration-curve"/>
-              </dc:when>
-              <dc:when test="$out = 'waterlevels'">
-                <dc:call-macro name="basedata_0"/>
-                <dc:call-macro name="basedata_1_additionals"/>
-                <dc:call-macro name="basedata_2_fixations"/>
-                <dc:call-macro name="basedata_4_heightmarks-points"/>
-                <dc:call-macro name="basedata_5_flood-protections"/>
-                <dc:call-macro name="waterlevels-fix"/>
-              </dc:when>
-              <dc:when test="$out = 'fix_wq_curve'">
-                <dc:call-macro name="waterlevels-fix"/>
-              </dc:when>
-              <dc:when test="$out = 'floodmap'">
-                <dc:call-macro name="flood-map"/>
-              </dc:when>
-              <dc:when test="$out = 'map'">
-                <dc:call-macro name="flood-map"/>
-              </dc:when>
-              <dc:when test="$out = 'bedheight_middle'">
-                <dc:call-macro name="waterlevels-discharge"/>
-                <dc:call-macro name="waterlevels-fix"/>
-              </dc:when>
-              <dc:when test="$out = 'floodmap-hws'">
-                <dc:call-macro name="floodmap-hws-user"/>
-              </dc:when>
-              <dc:when test="$out = 'flow_velocity'">
-                <dc:call-macro name="bedquality-bed"/>
-                <dc:call-macro name="bedquality-load"/>
-              </dc:when>
-              <dc:when test="$out = 'bed_longitudinal_section'">
-                <dc:call-macro name="bedquality-bed"/>
-                <dc:call-macro name="bedquality-load"/>
-                <dc:call-macro name="bedquality-density"/>
-                <dc:call-macro name="bedquality-porosity"/>
-              </dc:when>
-              <dc:when test="$out = 'sedimentload_ls'">
-                <dc:call-macro name="differences"/>
-                <dc:call-macro name="bedheight-differences"/>
-                <dc:call-macro name="flow-velocity"/>
-                <dc:call-macro name="sediment-load"/>
-              </dc:when>
-              <dc:when test="$out = 'bed_difference_year'">
-                <dc:call-macro name="waterlevels-discharge"/>
-                <dc:call-macro name="bedheight-differences"/>
-                <dc:call-macro name="differences"/>
-                <dc:call-macro name="waterlevels-fix"/>
-                <dc:call-macro name="delta-wt-ls"/>
-              </dc:when>
-              <dc:when test="$out = 'bed_difference_epoch'">
-                <dc:call-macro name="waterlevels-discharge"/>
-                <dc:call-macro name="bedheight-differences"/>
-                <dc:call-macro name="differences"/>
-                <dc:call-macro name="waterlevels-fix"/>
-                <dc:call-macro name="delta-wt-ls"/>
-              </dc:when>
-            </dc:choose>
-          </dc:iterate>
-      </dc:call-macro>
+          <dc:choose>
+            <dc:when test="dc:contains($parameters, 'recommended')">
+              <dc:comment>
+                Recommendations (client shall load immediately).
+              </dc:comment>
+              <dc:iterate var="out" container="artifact-outs">
+                <dc:choose>
+                  <dc:when test="$out = 'longitudinal_section'">
+                    <dc:call-macro name="officiallines_user"/>
+                  </dc:when>
+                </dc:choose>
+              </dc:iterate>
+            </dc:when>
+            <dc:otherwise>
+              <dc:comment>
+                Non Recommendations
+              </dc:comment>
+              <dc:iterate var="out" container="artifact-outs">
+                <dc:choose>
+                  <dc:when test="$out = 'longitudinal_section'">
+                    <dc:call-macro name="longitudinal"/>
+                    <dc:call-macro name="differences"/>
+                  </dc:when>
+                  <dc:when test="$out = 'discharge_longitudinal_section'">
+                    <dc:call-macro name="longitudinal"/>
+                    <dc:call-macro name="differences"/>
+                  </dc:when>
+                  <dc:when test="$out = 'w_differences'">
+                    <dc:call-macro name="longitudinal"/>
+                    <dc:call-macro name="differences"/>
+                  </dc:when>
+                  <dc:when test="$out = 'fix_deltawt_curve'">
+                    <dc:call-macro name="delta-wt"/>
+                  </dc:when>
+                  <dc:when test="$out = 'reference_curve'">
+                    <dc:call-macro name="reference-curves"/>
+                  </dc:when>
+                  <dc:when test="$out = 'computed_discharge_curve'">
+                    <dc:call-macro name="computed-discharge-curve"/>
+                  </dc:when>
+                  <dc:when test="$out = 'cross_section'">
+                    <dc:call-macro name="waterlevels"/>
+                  </dc:when>
+                  <dc:when test="$out = 'fix_longitudinal_section_curve'">
+                    <dc:call-macro name="longitudinal-section"/>
+                  </dc:when>
+                  <dc:when test="$out = 'fix_derivate_curve'">
+                    <dc:call-macro name="fix-derivate-curve"/>
+                  </dc:when>
+                  <dc:when test="$out = 'fix_wq_curve'">
+                    <dc:call-macro name="fix-wq-curve"/>
+                  </dc:when>
+                  <dc:when test="$out = 'duration_curve'">
+                    <dc:call-macro name="duration-curve"/>
+                  </dc:when>
+                  <dc:when test="$out = 'waterlevels'">
+                    <dc:call-macro name="waterlevels-fix"/>
+                  </dc:when>
+                  <dc:when test="$out = 'fix_wq_curve'">
+                    <dc:call-macro name="waterlevels-fix"/>
+                  </dc:when>
+                  <dc:when test="$out = 'floodmap'">
+                    <dc:call-macro name="flood-map"/>
+                  </dc:when>
+                  <dc:when test="$out = 'map'">
+                    <dc:call-macro name="flood-map"/>
+                  </dc:when>
+                  <dc:when test="$out = 'bedheight_middle'">
+                    <dc:call-macro name="waterlevels-discharge"/>
+                    <dc:call-macro name="waterlevels-fix"/>
+                  </dc:when>
+                  <dc:when test="$out = 'floodmap-hws'">
+                    <dc:call-macro name="floodmap-hws-user"/>
+                  </dc:when>
+                  <dc:when test="$out = 'flow_velocity'">
+                    <dc:call-macro name="bedquality-bed"/>
+                    <dc:call-macro name="bedquality-load"/>
+                  </dc:when>
+                  <dc:when test="$out = 'bed_longitudinal_section'">
+                    <dc:call-macro name="bedquality-bed"/>
+                    <dc:call-macro name="bedquality-load"/>
+                    <dc:call-macro name="bedquality-density"/>
+                    <dc:call-macro name="bedquality-porosity"/>
+                  </dc:when>
+                  <dc:when test="$out = 'sedimentload_ls'">
+                    <dc:call-macro name="differences"/>
+                    <dc:call-macro name="bedheight-differences"/>
+                    <dc:call-macro name="flow-velocity"/>
+                    <dc:call-macro name="sediment-load"/>
+                  </dc:when>
+                  <dc:when test="$out = 'bed_difference_year'">
+                    <dc:call-macro name="waterlevels-discharge"/>
+                    <dc:call-macro name="bedheight-differences"/>
+                    <dc:call-macro name="differences"/>
+                    <dc:call-macro name="waterlevels-fix"/>
+                    <dc:call-macro name="delta-wt-ls"/>
+                  </dc:when>
+                  <dc:when test="$out = 'bed_difference_epoch'">
+                    <dc:call-macro name="waterlevels-discharge"/>
+                    <dc:call-macro name="bedheight-differences"/>
+                    <dc:call-macro name="differences"/>
+                    <dc:call-macro name="waterlevels-fix"/>
+                    <dc:call-macro name="delta-wt-ls"/>
+                  </dc:when>
+                </dc:choose>
+              </dc:iterate>
+            </dc:otherwise>
+          </dc:choose>
+        </dc:call-macro>
       </dc:call-macro>
     </dc:macro>
 
@@ -1294,7 +1316,7 @@
       <dc:filter expr="$kind=4">
         <dc:if test="dc:has-result()">
           <heightmarks>
-            <dc:group expr="{dc:replace($wst_description, 'HW-Marken/', '')}">
+            <dc:group expr="dc:replace($wst_description, 'HW-Marken/', '')">
               <heightmark name="dc:group-key()">
                 <dc:for-each>
                   <column name="{$wst_column_name}"
@@ -1313,7 +1335,7 @@
       <dc:filter expr="$kind=4">
         <dc:if test="dc:has-result()">
           <heightmarks>
-            <dc:group expr="{dc:replace($wst_description, 'HW-Marken/', '')}">
+            <dc:group expr="dc:replace($wst_description, 'HW-Marken/', '')">
               <relativepoint name="dc:group-key()">
                 <dc:for-each>
                   <column name="{$wst_column_name}"
@@ -1644,7 +1666,9 @@
           <additionals>
             <dc:group expr="dc:replace($wst_description, 'Zus.Längsschnitte/', '')">
               <additional name="{dc:group-key()}">
-                <dc:macro-body/>
+                <dc:for-each>
+                  <dc:macro-body/>
+                </dc:for-each>
               </additional>
             </dc:group>
           </additionals>