--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/flys-artifacts/ChangeLog	Fri Sep 28 12:14:17 2012 +0200
@@ -0,0 +1,5950 @@
+2011-09-16  Bjoern Schilberg <bjoern.schilberg@intevation.de>
+
+	* doc/mapserver/fontset.txt:
+	  Added initial font set for km_annotation layer.
+	* doc/mapserver/symbols/symbols.sym:
+	  Added square symbol for km and fixpoint layer.
+	* doc/mapserver/saar-mapfile.map:
+	  Adjust styling in the flys karte-archiv way.
+
+2011-09-19  Ingo Weinzierl <ingo@intevation.de>
+
+	Tagged RELEASE 2.5
+
+	* Changes: Prepared changes for release.
+
+2011-09-19  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/WDifferencesState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WaterlevelSelectState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WaterlevelPairSelectState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Removed
+	  needless imports.
+
+2011-09-16  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/meta-data.xml: Improved datacage configuration for DEMs.
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Query DGMs by the given ID in the FLYS data pool - not by given range
+	  values.
+
+2011-09-16  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/meta-data.xml: Added a section for DEMs to the floodmap
+	  section.
+
+2011-09-16  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+ Fix build.
+
+	* src/main/java/de/intevation/flys/artifacts/state/WDifferencesState.java:
+	  Fix build.
+
+2011-09-16  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+ Take a given WaterlevelPair-String, load artifact and plot the diff.
+
+	* src/main/java/de/intevation/flys/artifacts/state/WDifferencesState.java:
+	  Load correct artifacts.
+
+2011-09-16  Bjoern Schilberg <bjoern.schilberg@intevation.de>
+
+	* doc/mapserver/*: Added inital mapserver configuration files.
+
+2011-09-16  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/meta-data.xml: Moved the system specific configuration into a
+	  macro to the top of the configuration document. Call this macro at the
+	  end of the user specific part and in the part that should contain the
+	  system specific stuff only!
+
+2011-09-16  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
+	  Defined createItem() here and adapted some method signatures, because I
+	  need the CallContext deeper in code than expected.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WaterlevelSelectState.java:
+	  Write the name of the selected waterlevel into the static DESCRIBE.
+
+	* src/main/java/de/intevation/flys/artifacts/states/ScenarioSelect.java:
+	  Adapted method signatures that have been changed in DefaultState.
+
+	* src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java:
+	  Removed method createItem() which is now defined in the upper class
+	  DefaultState.
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties: Added string for selected
+	  waterlevel that is displayed in static UI.
+
+2011-09-16  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties: Added state label for
+	  waterlevel selection.
+
+2011-09-15  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/WaterlevelSelectState.java:
+	  Validate incoming data string and strip brackets.
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Fetch waterlevel data from external Artifact if existing. If no external
+	  Artifact is specified that provides waterlevel data, we gonna try to
+	  fetch it from the current Artifact.
+
+2011-09-15  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/WaterlevelPairSelectState.java:
+	  Removed needless import which caused compile errors.
+
+2011-09-15  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
+	  Added a transform() method. This method should be used to transform
+	  input data in form of a string into a better data structure. This state
+	  provides a simple implementation which just returns a StateData object
+	  that contains exactly the input string.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Transform
+	  input strings using DefaultState.transform() before they are added to
+	  its data pool.
+
+2011-09-15  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Made collection solid for the case if it has no Artifacts.
+
+2011-09-15  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/utils/FLYSUtils.java: Fetch Artifact
+	  from ArtifactDatabase properly. Write better error logs if that process
+	  fails.
+
+2011-09-14  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+ Extend WDifferences branch to have calculations in dedicated, new state.
+
+	* doc/conf/artifacts/winfo.xml: Added new State and Transition in
+	  WDifferences-branch.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WaterlevelPairSelectState.java:
+	  New state.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WDifferencesState.java:
+	  Specify to not take input, prepare getting other facets.
+
+2011-09-14  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/DGMSelect.java: This
+	  state now desires the UIProvider 'dem_datacage_panel'.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WaterlevelSelectState.java:
+	  New. This state is used to define the desired UIProvider
+	  'wsp_datacage_panel'.
+
+	* doc/conf/artifacts/winfo.xml: Added a new way to start a WSPLGEN
+	  calculation when choosing the calculation type 'floodmap'.
+
+2011-09-14  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/AttributeWriter.java: Merge
+	  facets only if their name AND their owner artifact are equal.
+
+2011-09-14  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+ Partial Fix flys/issue304 (3) (Baseline).
+
+	* src/main/java/de/intevation/flys/exports/WDifferencesCurveGenerator.java:
+	  Show Baseline in WDifferencesPlot.
+
+2011-09-14  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+ Fix flys/issue310 (cross-section theme).
+
+	* doc/conf/themes.xml: CrossSection-Themes: profile thin, water blue.
+
+2011-09-14  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+ Fix flys/issue310 (cross-section theme).
+
+	* doc/conf/themes.xml: CrossSection-Themes: profile thin, water blue.
+
+2011-09-13  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Add an quick and simple error to the report if an error occured while
+	  WSPLGENJob creation.
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties: Added error messages for
+	  WSPLGEN job creation errors.
+
+2011-09-13  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+ Fix crash when drawing StickyAxisAnnotation when no range was given.
+ User-directed issues remain ( flys/issue303 ).
+
+	* src/main/java/de/intevation/flys/jfree/StickyAxisAnnotation.java
+	  (draw):
+	  Guard access to domainAxis, rangeAxis and the corresponding ranges.
+	  Warn and exit if any was null.
+
+2011-09-13  Ingo Weinzierl <ingo@intevation.de>
+
+	flys/issue290 (Karte: Eingabe von Differenzen zw. WSP und Gelände findet
+	keine Ausprägung in der Karte)
+
+	* doc/conf/mapserver/wsplgen_class.vm: Added styles for DIFF attribute.
+
+	* doc/conf/mapserver/mapfile.vm: Set debug default to '5'.
+
+2011-09-12  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Add a first WSPLGEN status message (notifies the user about a
+	  queued job) after the job has been added to the Scheduler.
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties: Added english and german
+	  status message text.
+
+2011-09-12  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/utils/GeometryUtils.java: Write
+	  shapefiles only if there are features for it existing.
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  A WSPLGEN facet is only created, if the calculation was successfully
+	  added to the Scheduler. A barrier facet is only created if the WSPLGEN
+	  calculation has been added to the scheduler AND if there are digitized
+	  geometries existing.
+
+2011-09-12  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+ Copied and slightly modified implementation of guessWaterIncreasing from
+ WQKms to (new) DataUtils. Accidentally commited usage in last commit, to
+ correct orientation of diagram (invert x axis).
+
+	* src/main/java/de/intevation/flys/utils/DataUtils.java:
+	  New file with guessWaterIncreasing implementation from WQKms,
+	  slightly adjusted.
+
+2011-09-12  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+ Cosmetics.
+
+	* src/main/java/de/intevation/flys/exports/WDifferencesCurveGenerator.java,
+	  src/main/java/de/intevation/flys/artifacts/model/WKmsImpl.java:
+	  Cosmetics.
+
+2011-09-12  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+ Added CSV Export for W-Differences.
+
+	* doc/conf/conf.xml: Added Exporter.
+	
+	* doc/conf/artifacts/winfo.xml: Removed transition over distances
+	  state, added export outputmode and facet.
+
+	* src/main/java/de/intevation/flys/exports/WDifferencesExporter.java:
+	  New, CSV-Exporter for WDifferences.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WDifferencesState.java:
+	  Add export facet.
+
+2011-09-12  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/DataFacet.java:
+	  Cosmetics, docs.
+	
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java,
+	  src/main/java/de/intevation/flys/exports/AbstractExporter.java,
+	  src/main/java/de/intevation/flys/exports/DurationCurveExporter.java:
+	  Cosmetics.
+
+2011-09-12  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
+	  Sourced the code to append a concrete data item to the static DESCRIBE
+	  part out to an own method (appendStaticData()).
+
+	* src/main/java/de/intevation/flys/artifacts/states/ScenarioSelect.java:
+	  Override appendStaticData() to suppress the GeoJSON string to be
+	  included in the static DESCRIBE.
+
+2011-09-12  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/CrossSectionFactory.java,
+	  src/main/java/de/intevation/flys/artifacts/model/CrossSectionWaterLineFacet.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WDifferencesState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/RiverAxisState.java,
+	  src/main/java/de/intevation/flys/exports/WDifferencesCurveGenerator.java,
+	  src/main/java/de/intevation/flys/exports/CrossSectionGenerator.java:
+	  Removed needless imports.
+
+2011-09-09  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/CalculationMessage.java:
+	  New. A subclass of Message (in the Artifacts system). It stores a
+	  string message and a progress (in form of step x/y).
+
+	* src/main/java/de/intevation/flys/wsplgen/JobObserver.java: The observer
+	  now writes background messages into the artifact system using the
+	  CallContext.addBackgroundMessage(). We use instances of
+	  CalculationMessage here, that makes the WINFOArtifact able to put
+	  progress information into the Artifact's DESCRIBE as well.
+	  
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Write
+	  status message and progress information into the DESCRIBE if the
+	  Artifact has started a background process.
+
+2011-09-09  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+ Fix flys/issue280 .
+
+	* src/main/java/de/intevation/flys/jfree/StickyAxisAnnotation.java:
+	  Do not draw boxes around annotations.
+
+2011-09-09  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+ Fix flys/issue279 .
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Fix behaviour in various thinkable malconditions.
+
+2011-09-09  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Made one case of cross section fetching more robust.
+
+2011-09-09  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Fix Facet name and Legend of W-Differences, also insert state to specify
+	distance.
+
+	* doc/conf/artifacts/winfo.xml: Add additional transitions to walk over
+	  distances state.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WDifferencesState.java:
+	  Set facets description.
+
+	* src/main/java/de/intevation/flys/exports/WDifferencesCurveGenerator.java:
+	  Take facets description as legend.
+
+2011-09-09  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Added configuration to kick-in w-differences branch of winfo.
+
+	* doc/conf/conf.xml: Register new (w-differences) OutputGenerators.
+
+	* doc/conf/artifacts/winfo.xml: Register new state and transitions.
+
+	* src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java:
+	  Added new (w-differences) calculation mode.
+
+	* src/main/java/de/intevation/flys/exports/WDifferencesCurveInfoGenerator.java:
+	  New file, implementing naive approach to display w-differences
+	  (accidentially omitted in last commit).
+
+2011-09-09  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Added very stubby WDifferences State/OutGenerator for WINFOArtifact.
+
+	* src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java:
+	  Added w_differences facet type.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WDifferencesState.java:
+	  New file, implements naive approach to calculate w-differences (of
+	  calculations identified by hardcoded uuids!) and register respective facet.
+
+	* src/main/java/de/intevation/flys/exports/WDifferencesCurveGenerator.java:
+	  New file, implementing naive approach to display w-differences.
+
+2011-09-09  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Implement getArtifact(uuid,context) in FLYSUtils.
+
+	* src/main/java/de/intevation/flys/utils/FLYSUtils.java (getArtifact):
+	  Added implementation, partially resolving a TODO. Added logger instance.
+
+2011-09-08  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WSPLGENCalculation.java:
+	  New. This sublcass of Calculation saves warnings and errors that occur
+	  while WSPLGEN is running.
+	  Note, that the interface of this class doesn't exactly apply the interface
+	  of Calculation. Maybe, we should generalize this interface!
+
+	* src/main/java/de/intevation/flys/artifacts/model/WSPLGENJob.java: Stores
+	  an instance of WSPLGENCalculation now. We use this instance to save
+	  warnings and errors.
+
+	* src/main/java/de/intevation/flys/wsplgen/ProblemObserver.java: Use the
+	  WSPLGENCalculation to save errors and warnings.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WSPLGENReportFacet.java:
+	  New. This facet is used for WSPLGEN reports. It stores an instance of
+	  WSPLGENCalculation which saves ERRORS and WARNINGS that occur while
+	  WSPLGEN execution.
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Create a WSPLGENReportFacet for WSPLGEN reports.
+
+	* doc/conf/conf.xml: Added an OutputGenerator 'report' for WSPLGEN
+	  reports.
+
+	* doc/conf/artifacts/winfo.xml: Added an output 'report' for WSPLGEN
+	  reports.
+
+2011-09-08  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/math/WKmsOperation.java,
+	  src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java:
+	  Cosmetics, docs.
+
+2011-09-08  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/wsplgen/JobObserver.java: Small
+	  adjustments that makes it easier to subclass this observer.
+
+	* src/main/java/de/intevation/flys/wsplgen/ProblemObserver.java: New. A
+	  sublcass of JobObserver which analyses the WSPLGEN output for errors and
+	  warnings.
+
+	* src/main/java/de/intevation/flys/wsplgen/JobExecutor.java: Use
+	  JobObserver and ProblemObserver to track the whole WSPLGEN output and
+	  print number of errors/warnings to log output.
+
+2011-09-08  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Added translation of w_differences.
+
+	* src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_de.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages.properties:
+	  Added "w_differnces" translation.
+
+2011-09-07  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Appended
+	  a new attribute 'background-processing' to the DESCRIBE of this
+	  Artifact. Its value is 'true' if this Artifact has started a background
+	  thread which has not finished yet - otherwise it is 'false.
+
+2011-09-07  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/RiverAxisState.java,
+	  src/main/java/de/intevation/flys/utils/GeometryUtils.java: Moved the
+	  code to determine the extent of a river based on its axis to
+	  GeometryUtils.
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Determine the extent of the selected river and set the WMSLayerFacet's
+	  extent attribute.
+
+2011-09-07  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Added Themeing support for CrossSection Diagrams.
+
+	* doc/conf/themes.xml:
+	  Added new themes and mappings, slightly modified longitudinalsection
+	  theme.
+
+2011-09-07  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	In CrossSection Diagram fix subtitle to display the km of which the data is
+	actually displayed (maybe contrasting users wish).
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  (getCrossSectionSnapKm): New method to fetch the actual km of crosssection.
+
+	* src/main/java/de/intevation/flys/exports/CrossSectionGenerator.java:
+	  Add correct km to charts subtitle.
+
+2011-09-07  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Fix various display-issues like i18n in cross-section diagram.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java:
+	  Set description of facets to expected values.
+
+	* src/main/java/de/intevation/flys/artifacts/exports/CrossSectionGenerator.java:
+	  Fix i18n of chart title. Set subtitle to expected value, pass facets
+	  description to StyledSeries to see expected legend.
+
+2011-09-07  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Cosmetics, resolved refactoring todo.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java
+	  (compute, computeAdvance, computeFeed): Refactored, extracted method,
+	  resolving duplicate code and TODO.
+
+2011-09-07  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Fix waterline "calculation" at given km. Chosen approach is
+	"head-through-wall".
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Some refactoring to do the same calculation twice easier and be able
+	  to "cross" waterline against correct profile data.
+
+
+2011-09-07  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Fix setting of kilometer for profile (not yet waterlevel) of cross section
+	diagram.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  (getCrossSectionData): Respect corss_section.km data; do naive linear
+	  search for profile data for this km.
+
+	* src/main/java/de/intevation/flys/artifacts/model/CrossSectionFacet.java:
+	  Declare a ComputeType.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java:
+	  Implement computeFeed.
+
+2011-09-07  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Minor cosmetics.
+
+2011-09-07  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/CrossSectionWaterLineFacet.java,
+	  src/main/java/de/intevation/flys/artifacts/model/DataFacet.java,
+	  src/main/java/de/intevation/flys/artifacts/model/WaterlevelFacet.java,
+	  src/main/java/de/intevation/flys/artifacts/state/DefaultState.java:
+	  Cosmetics, docs.
+
+2011-09-06  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/mapserver/barrier_polygons_class.vm,
+	  doc/conf/mapserver/barrier_lines_class.vm,
+	  doc/conf/mapserver/wsplgen_class.vm: Default Mapserver styles for
+	  barriers and WSPLGEN results. Those styles are only used as long as we
+	  don't have map specific themes (as already used in charts).
+
+	* doc/conf/mapserver/layer.vm: Implements a fallback mechanism for styling
+	  barrier lines/polygons and WSPLGEN results.
+
+	* src/main/java/de/intevation/flys/artifacts/model/LayerInfo.java: Added a
+	  getStyle() method that currently returns "null". This method needs to be
+	  implemented when map themes are introduced.
+
+2011-09-06  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/LayerInfo.java: Renamed
+	  some attributes to make their job in the mapfile more obvious.
+
+	* src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java: Added
+	  new facet type for barriers.
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java: Add
+	  a facet for the barriers layer.
+
+	* src/main/java/de/intevation/flys/utils/MapfileGenerator.java: Parse
+	  barriers (lines and polygons) and create two new layers for each type -
+	  those layers are grouped.
+
+	* doc/conf/mapserver/layer.vm: Renamed attribute based on changes in
+	  LayerInfo and added support for Group-Layers.
+
+2011-09-06  Raimund Renkert <raimund.renkert@intevation.de>
+
+	* doc/conf/conf.xml:
+	  Added driver to database configuration for use with postgresql.
+
+2011-09-06  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/mapserver/mapfile.vm: Removed FONTSET attribute and set quotes
+	  for SHAPEPATH.
+
+2011-09-05  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WSPLGENFacet.java:
+	  Removed. We gonna use the WMSLayerFacet until now.
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Add a WMSLayerFacet after we triggered the Scheduler to start a WSPLGEN
+	  calculation.
+
+2011-09-05  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/mapserver/layer.vm,
+	  doc/conf/mapserver/mapfile.vm: Small bugfixes and style improvements.
+
+	* src/main/java/de/intevation/flys/wsplgen/JobExecutor.java: Trigger the
+	  MapfileGenerator after a WSPLGEN job has finished regardless if it has
+	  been finished successfully or not.
+
+2011-09-05  Ingo Weinzierl <ingo@intevation.de>
+
+	* pom.xml: Added Apache Velocity 1.7 for templating support.
+
+	* doc/conf/conf.xml: Added config options for mapserver/template relevant
+	  stuff.
+
+	* doc/conf/mapserver/mapfile.vm,
+	  doc/conf/mapserver/layer.vm: New. A default mapfile template and a
+	  template used for layers.
+
+	* src/main/java/de/intevation/flys/artifacts/model/LayerInfo.java: New.
+	  This class is used while reading WMS layer relevant information from
+	  filesystem.
+
+	* src/main/java/de/intevation/flys/utils/MapfileGenerator.java: New. This
+	  thread is used for creating mapfiles for Mapserver. The MapfileGenerator
+	  runs in daemon mode (own thread) and creates mapfiles based on WMS
+	  layer relevant information read from filesystem.
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java,
+	  src/main/java/de/intevation/flys/utils/FLYSUtils.java: Moved shapefile
+	  specific XPath expressions from FloodMapState to FLYSUtils which is a
+	  better place to use it in other classes (as MapfileGenerator).
+
+2011-09-05  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WSPLGENJob.java:
+	  Bugfixed broken attribute assignment.
+
+	* src/main/java/de/intevation/flys/wsplgen/JobExecutor.java: Call
+	  CallContext.afterBackground() after a WSPLGEN job has finished to remove
+	  the background lock from Artifact.
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Call CallContext.afterCall(BACKGROUND) to lock the Artifact for
+	  background processing.
+
+2011-09-02  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/wsplgen/JobExecutor.java: New. This
+	  class is used to start WSPLGEN for a specific WSPLGENJob. The System
+	  property "wsplgen.bin.path" tells the JobExecutor where the WSPLGEN
+	  binary is placed (which means in general, the property points to the
+	  'wsplgen.exe').
+
+	* src/main/java/de/intevation/flys/wsplgen/Scheduler.java: New. This
+	  scheduler currently allows to start just a single WSPLGEN Thread. All
+	  WSPLGEN calculations should be started using Scheduler.addJob().
+
+	* src/main/java/de/intevation/flys/wsplgen/JobObserver.java: New. This
+	  thread reads log messages from WSPLGEN and listens for specific
+	  messages. It should be used to update status messages of the WSPLGEN
+	  calculation that is currently running.
+	  There is a System property that tells the JobObserver to log all WSPLGEN
+	  output to log4j: enable WSPLGEN output with "-Dwsplgen.log.output=true".
+
+	* src/main/java/de/intevation/flys/artifacts/model/WSPLGENJob.java: Added
+	  the FLYSArtifact, the current working directory and the CallContext.
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Use the Scheduler to start new WSPLGEN calculations.
+
+2011-09-02  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Add CrossSectionInfoGenerator.
+
+	* src/main/java/de/intevation/flys/exports/CrossSectionInfoGenerator.java:
+	  New, trivial implementation of CrossSectionInfoGenerator.
+
+	* doc/conf/conf.xml:
+	  Register CrossSectionInfoGenerator.
+
+2011-09-01  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Cleanups of CrossSection*.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  New methods to retrieve name of utilized CrossSection.
+
+	* src/main/java/de/intevation/flys/exports/CrossSectionGenerator.java:
+	  Cleanup, get rid of copied unused method, documentation and more sensible
+	  translations.
+
+	* src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_de.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages.properties:
+	  Added cross_section* translations, also cleanups.
+
+2011-09-01  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Set the "typ" attribute of lines and polygons in barrier shapefiles.
+
+2011-09-01  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Set the Z values of line and polygon barrier geometries. Both barrier
+	  shapefiles will contain 3D geometries now.
+
+2011-09-01  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Get real data to display in CrossSection (although ignorant of
+	parameterization), making use of the showcase code of the CrossSectionApp-
+	Standalone application.
+
+	* doc/conf/artifacts/winfo.xml: Add new facet (~waterline) to state/out.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  New methods to get relevant data. So far just takes the first value of
+	  everything and assuming a waterlevel at 130m.
+
+	* src/main/java/de/intevation/flys/artifacts/model/CrossSectionWaterLineFacet.java:
+	  New Facet responsible of water level in cross section.
+
+	* src/main/java/de/intevation/flys/artifacts/charts/CrossSectionApp.java:
+	  Made some functionality publicly and statically available.
+
+	* src/main/java/de/intevation/flys/artifacts/model/CrossSectionFacet.java:
+	  Update call.
+
+	* src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java: Added new
+	  Facet type.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java:
+	  Added new Facet to out.
+
+	* src/main/java/de/intevation/flys/exports/CrossSectionGenerator.java:
+	  Respect new facet and facets data.
+
+2011-09-01  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/utils/GeometryUtils.java: Close an open
+	  shapefile transaction and catch exceptions which are thrown while
+	  shapefile creation here. If there occured an error, this functions
+	  returns FALSE, otherwise TRUE.
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Removed exception handling while shapefile creation - this is done in
+	  GeometryUtils now.
+
+2011-09-01  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Renamed the file for WSPLGEN required waterlevels to "waterlevels.wst".
+	  WSPLGEN did not work with the former "waterlevels.txt" file.
+
+2011-09-01  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/utils/GeometryUtils.java: New static
+	  function that builds new SimpleFeatureTypes with additional attributes.
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Write attributes "ELEVATION" and "KILOMETER" into the crosssection
+	  tracks shapefiles.
+
+2011-08-31  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/utils/FLYSUtils.java: Added a method
+	  stub that should return a FLYSArtifact based on a given UUID.
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Write the selected WST file for WSPLGEN. Note, that this is the WST file
+	  of the current WINFO artifact. Furthermore, there is currently no way
+	  for the user to select a column from WST file, so we currently use the
+	  column that is written to WST file at first.
+
+2011-08-31  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Changed
+	  the parameter order of a compute(...) method. This makes me able to call
+	  this without a hash value.
+
+	* src/main/java/de/intevation/flys/artifacts/model/DataFacet.java,
+	  src/main/java/de/intevation/flys/artifacts/model/WaterlevelFacet.java,
+	  src/main/java/de/intevation/flys/artifacts/model/ReportFacet.java:
+	  Adapted the parameter order of the compute() call (see above).
+
+2011-08-31  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	More bones to CrossSection sceleton.
+
+	* src/main/java/de/intevation/flys/artifacts/model/CrossSectionFactory.java,
+	  src/main/java/de/intevation/flys/artifacts/model/CrossSectionFacet.java:
+	  New, yet trivial implementations of Factory and Facet for CrossSections.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java:
+	  Add new CrossSection- (instead of Default-)Facet.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java,
+	  src/main/java/de/intevation/flys/exports/CrossSectionGenerator.java:
+	  Adjusted to use (touch) new Factory and Facet.
+
+2011-08-31  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Cosmetics.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Cosmetics.
+
+2011-08-31  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Cosmetics.
+
+	* src/main/java/de/intevation/flys/artifacts/AnnotationArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/model/MainValuesQFacet.java,
+	  src/main/java/de/intevation/flys/exports/CrossSectionGenerator.java:
+	  Removed obselete imports.
+
+	* src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java:
+	  Removed obselete imports, whitespaces.
+
+	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
+	  Whitespaces, docs.
+
+2011-08-31  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Fix translations of Main Values Facets.
+
+	* src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java:
+	  Do acrobatics to keep state transient but get translated title.
+
+	* src/main/java/de/intevation/flys/artifacts/MainValuesQFacet.java,
+	  src/main/java/de/intevation/flys/artifacts/MainValuesWFacet.java:
+	  Changed constructor to get description (which is then already be translated)
+	  dynamically, adjust deepCopy.
+
+	* src/main/java/de/intevation/flys/states/StaticState.java:
+	  Adjust constructor accordingly.
+
+2011-08-31  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Add sceleton for CrossSection outs.
+
+	* doc/conf/artifacts/winfo.xml:
+	  Added new output mode to respective state of winfo artifact configuration.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java:
+	  Add new Dummy-Facet in state.
+
+	* doc/conf/conf.xml:
+	  Registered new OutputGenerator.
+
+	* src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java:
+	  Added new CROSS_SECTION type.
+
+	* src/main/java/de/intevation/flys/exports/CrossSectionGenerator.java:
+	  New, stubby skeleton for an CrossSectionGenerator.
+
+	* src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_de.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages.properties:
+	  Added cross_section translation, also cleanups (e.g. main values).
+
+2011-08-31  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WSPLGENJob.java: Marked
+	  required parameters with a comment.
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Export floodplains (german 'Talaue') to shapefile and write its file
+	  path into the WSPLGEN job.
+
+2011-08-31  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Search for a DGM that fits to the current river and km range and write
+	  its file path into the WSPLGEN job.
+
+2011-08-30  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/utils/GeometryUtils.java: Improved
+	  exception handling: exceptions are catched in GeometryUtils now.
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Write river axis and crosssections to shapefiles and save shapefile
+	  pathes in WSPLGENJob.
+
+2011-08-30  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Use the coorect SRID for reading GeoJSON and writing line/polygon
+	  shapefiles.
+
+	* src/main/java/de/intevation/flys/utils/GeometryUtils.java: Use a
+	  concrete coordinate system while feature type creation.
+
+2011-08-30  Ingo Weinzierl <ingo@intevation.de>
+
+	* pom.xml: Added GeoTools 2.7.2 dependencies for Shapefile, GeoJSON and
+	  EPSG support.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WSPLGENJob.java: Store
+	  'LIN' parameter in a list now. A WSPLGEN parameter might contain many
+	  LINs.
+
+	* src/main/java/de/intevation/flys/utils/GeometryUtils.java: New functions
+	  to create FeatureTypes and to write shapefiles.
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Write user specified barriers into a shapefile placed in the artifact
+	  directory.
+
+2011-08-30  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/utils/FLYSUtils.java: Added a function
+	  that extracts the SRID defined in the global configuration file for a
+	  given river.
+
+	* src/main/java/de/intevation/flys/artifacts/states/RiverAxisState.java:
+	  Removed the code that extracts the river SRID - use FLYSUtils instead.
+
+2011-08-29  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Use FLYSUtils.getRiver instead of WINFOArtifact.getRiver.
+
+	* src/main/java/de/intevation/flys/exports/ChartGenerator.java:
+	  Use FLYSUtils.getRiver instead of WINFOArtifact.getRiver.
+
+2011-08-29  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Use FLYSUtils.getRiver instead of WINFOArtifact.getRiver.
+
+	* src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WQSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java,
+	  src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
+	  Use FLYSUtils.getRiver instead of WINFOArtifact.getRiver.
+
+2011-08-29  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Commit accidentally omitted result of refactoring (WINFO/FLYSUtils/getRiver).
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Removed implementations of getRiver, update calls to use FLYSUtils.
+
+2011-08-29  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Interpolate Q main values, generate interpolated W main values on the fly from
+	Q main values.
+
+	* src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java:
+	  (getGaugeDatum): removed, obsolete
+	  (getLocation): new, gets location
+	  Use WstValueTable to look up interpolated Qs of MainValues. In absence of
+	  the same functionality for Ws, generate W Main Values from Q Main Values.
+
+2011-08-29  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Use new helper class FLYSUtils, minor refactorization.
+
+	* src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java:
+	  Use new functionality of helper class, convenience of FLYSArtifact.
+
+2011-08-29  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Refactored to use new Helper class FLYSUtils, moved getRiver-functionality
+	in there.
+
+	* src/main/java/de/intevation/flys/utils/FLYSUtils.java (getRiver):
+	  New function to retrieve river of an artifact, slightly modified from
+	  WINFOArtifact.
+
+	* src/main/java/de/intevation/flys/artifacts/AnnotationArtifact.java:
+	  Removed implementations of getRiver, update calls to use FLYSUtils.
+
+2011-08-29  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Minor cosmetics.
+
+	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
+	  Resolved a TODO.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  Added some documentation.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WMSLayerFacet.java:
+	  Minor cosmetic.
+
+2011-08-26  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/meta-data.xml: Made it Oracle compatible.
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/templating/CompiledStatement.java:
+	  If running in debug mode log executed statements.
+	  Helps debugging Oracle connections.
+
+2011-08-26  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Set some WSPLGENJob parameters which are stored at FLYSArtifact.
+
+2011-08-26  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/utils/FLYSUtils.java: New. This helper
+	  class should provide some basic FLYS stuff. Currently, there are functions
+	  that return the km range/location.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Removed
+	  the methods that return the km range/locations. This is implemented in
+	  FLYSUtils now.
+
+	* src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java,
+	  src/main/java/de/intevation/flys/exports/ChartGenerator.java: Adapted
+	  the WINFO method calls to retrieve the km range/locations - call
+	  FLYSUtils now.
+
+2011-08-26  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: New method
+	  to destroy a single state.
+
+2011-08-26  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java:
+	  Cosmetic, remove debug output and comments, minor style adjustments.
+
+2011-08-26  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Added limited themeing-support for MainValues.
+
+	* doc/conf/themes.xml:
+	  Added Q/W-MainValues themes.
+
+	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
+	  Added limited theming support, add legend entry for main values.
+
+2011-08-26  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/conf.xml: Added a configuration node that points to the directory
+	  where shapefiles should be stored in.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WSPLGENJob.java: New.
+	  This class is used to save/write the parameter for a WSPLGEN calculation.
+	  WSPLGEN's *.par files are written using the toFile() method.
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  A directory for all WSPLGEN stuff is created in computeAdvance() - those
+	  directory and all its contained files are removed in endOfLife().
+
+2011-08-26  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/utils/ThemeUtil.java:
+	  New Util to work with theme-related stuff.
+
+2011-08-26  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java:
+	  Use NamedDoubles instead of MainValues, try to adjust scale of Ws.
+
+	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
+	  Use NamedDoubles instead of MainValues, generalize annotation handling, to
+	  allow easier reusability and themeing.
+
+	* src/main/java/de/intevation/flys/jfree/StickyAxisAnnotation.java:
+	  Added convenience constructor, exemplary switch on bordered text.
+
+2011-08-26  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* doc/conf/meta-data.xml:
+	  Recommend MainValues for Computed discharge curves.
+
+2011-08-26  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	New NamedDouble class which implements a <String,double>-pair.
+
+	* src/main/java/de/intevation/flys/artifacts/model/NamedDouble.java:
+	  New, implementation of a double with a string or vice versa.
+
+2011-08-26  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Call
+	  State.endOfLife() for all States when endOfLife() of the Artifact is
+	  called.
+
+2011-08-26  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Also plot "W"-MainValues (on vertical axis), take correct parameters, but
+	do not convert to correct scale (cm vs NN+m).
+
+	* src/main/java/de/intevation/flys/jfree/StickyAxisAnnotation.java:
+	  Naive attempt at allowing the vertical axis to be sticked at.
+
+	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
+	  Store Q and W MainValues separately, add them to plot as annotations.
+
+	* src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java:
+	  Serve the MainValues, parameterized on river and location, Q and W.
+	  Removed Facet-implementation.
+
+	* src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java:
+	  Updated Facet Types.
+
+	* src/main/java/de/intevation/flys/artifacts/model/MainValuesQFacet.java:
+	  src/main/java/de/intevation/flys/artifacts/model/MainValuesWFacet.java:
+	  New, trivial facets, extracted from MainValuesArtifact.
+
+2011-08-26  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Call
+	  State.endOfLife() of each State that is no longer in the queue of the
+	  artifact when this artifact steps back to a previous state.
+
+2011-08-25  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
+	  Plot MainValues delivered by MainValuesFacet in much the same ways than
+	  Annotations in LongitudinalSection plots.
+
+2011-08-25  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/jfree/StickyAxisAnnotation.java:
+	  Prepare further differentiation between Annotations that stick to X or Y-
+	  Axis, copied some positioning logic into StickyAxisAnnotation
+	  implementation.
+
+2011-08-25  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
+	  Minor cosmetics.
+
+2011-08-25  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Added MainValue-Fetching-Capabilities to MainValuesArtifact.
+
+	* src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java
+	  (initialize, getMinValues):
+	  Let MainValuesArtifact return "real" MainValues, although ignorant of all
+	  parameterization.
+
+2011-08-25  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java
+	  (MainValueFacet):
+	  Improved and straightened implementation, added code-Annotations and Todos.
+
+2011-08-25  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java
+	  (MainValueFacet):
+	  Improved and straightened implementation, added code-Annotations and Todos.
+
+2011-08-25  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java
+	  (getState):
+	  Resolved multiple creation of state (yet not very clean).
+
+2011-08-25  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/AnnotationFacet.java,
+	  src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  Cosmetics, docs.
+
+	* src/main/java/de/intevation/flys/artifacts/AnnotationArtifact.java:
+	  Cosmetics.
+
+2011-08-25  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java:
+	  Added new (MainValues) Facet-Type.
+
+2011-08-24  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java:
+	  Added a method that returns a River object based on its database id.
+
+	* src/main/java/de/intevation/flys/artifacts/RiverAxisArtifact.java: The
+	  data that is required for this artifact is fetched from database instead
+	  from a Master-Artifact. The creation of static artifacts should use
+	  database ids instead of cloning a Master-Artifact.
+
+2011-08-24  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java:
+	  Removed needless imports.
+
+2011-08-24  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Added configuration for factory and rule for MainValueArtifacts.
+
+	* doc/conf.xml:
+	  Add a mainvalue factory to serve MainValueArtifacts.
+
+	* doc/conf/meta-data.xml:
+	  Recomment mainvalue artifact when computed_discharge_curve can be put out.
+
+2011-08-24  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Let MainValuesArtifact have a state, outputmode and facet.
+
+	* src/main/java/de/intevation/flys/artifacts/states/StaticState.java:
+	  New, a non-abstract DefaultState.
+
+	* src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java:
+	  Progressed with implementation, use StaticState to hook output modes and
+	  facet in; use (Static)FLYSArtifact implementation.
+
+2011-08-24  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Smaller cosmetics.
+
+	* src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java,
+	  src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
+	  Cosmetics in comments.
+
+	* src/main/java/de/intevation/flys/artifacts/AnnotationArtifact.java:
+	  Added @Override annotations.
+
+	* src/main/java/de/intevation/flys/artifacts/model/DataFacet.java:
+	  Use brackets to improve readability of ternary operator.
+
+2011-08-24  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/meta-data.xml: Use "ids" in user specific part, too.
+
+2011-08-24  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/meta-data.xml: s/db-ids/ids/g to unify system and user specific
+	  loading.
+
+2011-08-24  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Extracted access to state and states in order to have fewer places to
+	  modify when going for single/trivial state- artifacts.
+
+2011-08-24  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/WMSBackgroundState.java:
+	  Append the river's srid to the WMSLayerFacet.
+
+2011-08-24  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java:
+	  Minor fixes, ressurect Facet implementation as inner class.
+
+2011-08-24  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Moved the input of barriers one state
+	  earlier where the scenario is selected as well.
+
+	* src/main/java/de/intevation/flys/artifacts/states/ScenarioSelect.java:
+	  This state now desires the "map_digitize" UI provider and returns both
+	  items "scenario" and "uesk.barriers" in the dynamic describe part.
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Removed the UI provider and the computeFeed() which is no longer needed,
+	  because there is no more user input in this state.
+
+2011-08-24  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/WMSBackgroundState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/RiverAxisState.java:
+	  Repaired broken xpath expressions (the config changed in one of the last
+	  commits) and make use of the variable support in xpath expressions to
+	  replace the rivername.
+
+	* src/main/java/de/intevation/flys/artifacts/WMSBackgroundArtifact.java:
+	  Save the rivername while initializing this artifact. This is now
+	  necessary, because each river can have its own background wms
+	  configured.
+
+2011-08-23  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java:
+	  Repaired broken river-wms initialization.
+
+2011-08-23  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WMSLayerFacet.java,
+	  src/main/java/de/intevation/flys/artifacts/model/DataFacet.java,
+	  src/main/java/de/intevation/flys/artifacts/model/WaterlevelFacet.java,
+	  src/main/java/de/intevation/flys/artifacts/model/ReportFacet.java,
+	  src/main/java/de/intevation/flys/artifacts/model/DurationCurveFacet.java,
+	  src/main/java/de/intevation/flys/artifacts/model/ManagedFacet.java,
+	  src/main/java/de/intevation/flys/artifacts/model/ManagedFacetAdapter.java,
+	  src/main/java/de/intevation/flys/artifacts/model/AnnotationFacet.java,
+	  src/main/java/de/intevation/flys/artifacts/model/WSPLGENFacet.java:
+	  Made facets cloneable with the right type.
+
+	* src/main/java/de/intevation/flys/artifacts/services/MapInfoService.java,
+	  src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java:
+	  Removed superfluous imports.
+
+2011-08-23  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Declare the first artifact of an output as master artifact (artifacts
+	  are ordered by their creation time).
+
+2011-08-23  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java:
+	  Removed facet interface.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Make artifacts cloneable. TODO: Override deepCopy() in subclassed
+	  states and facets.
+
+2011-08-23  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/conf.xml: Added the MapInfoService and adapted the floodmap
+	  configuration. Now, each river can have its own background wms layer
+	  defined.
+
+	* src/main/java/de/intevation/flys/artifacts/services/MapInfoService.java:
+	  New. This service returns some basic information used to create maps for
+	  a specific river. The name of the desired river needs to be defined at
+	  "/mapinfo/river/text()".
+
+	* src/main/java/de/intevation/flys/artifacts/states/RiverAxisState.java:
+	  Adapted an xpath expression that points to the srid of a river in the
+	  floodmap configuration (which changed).
+
+2011-08-22  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Build out/facet filter from XML document passed at creation time.
+
+2011-08-22  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Added some code to filter outs/facets by an optional positive list.
+	  This is needed to only expose parts of the facets. This
+	  is needed for artifacts which are loaded into a collection.
+	  TODO: create the filter from the XML document passed at creation
+	  time.
+
+2011-08-22  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Moved all
+	  WINFO specific code to WINFOArtifact. FLYSArtifact is now only revolving 
+	  about state affairs.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Re-inserted
+	  the specific stuff here.
+	  
+	* src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java,
+	  src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WQSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/AnnotationArtifact.java,
+	  src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java,
+	  src/main/java/de/intevation/flys/exports/ChartGenerator.java:
+	  Adjusted the casts.
+
+2011-08-22  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/meta-data.xml: Filter by outs in user template part.
+
+2011-08-22  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Defined an input value for the GeoJSON
+	  string to save user defined barriers in the map.
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  Added a computeFeed() method. In addition, this state now prefers the
+	  "noinput" UI provider.
+
+2011-08-19  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/conf.xml: Each river requires a SRID definition. This
+	  definition is used to transform the river's geometries into the desired
+	  projection.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WMSLayerFacet.java:
+	  This facets are able to save a SRID.
+
+	* src/main/java/de/intevation/flys/artifacts/states/RiverAxisState.java:
+	  The extent that is written into the WMSLayerFacet is determined by the
+	  boundary of the geometry.
+
+	* src/main/java/de/intevation/flys/utils/GeometryUtils.java: New. A
+	  utility class that provides helper functions for geometries. Currently,
+	  one function is defined, that creates a boundary string for OpenLayers.
+
+2011-08-19  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DGMSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/ProfileDistanceSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/RangeState.java:
+	  Removed superfluous imports.
+
+2011-08-19  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
+	  Removed CallContext from state validation. It is not needed and hindered
+	  the extraction of all out of an artifact if you don't have a
+	  call context (like initial scan of datacage database).
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java:
+	  Extract all outs now.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java,
+	  src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/states/FloodplainChoice.java,
+	  src/main/java/de/intevation/flys/artifacts/states/ScenarioSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DGMSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/LocationSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java,
+	  src/main/java/de/intevation/flys/artifacts/states/ProfileDistanceSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DefaultState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WQSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/RangeState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/AnnotationArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Adjusted calls.
+
+2011-08-19  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties:
+	  Added lacalization of "Streckenfavoriten".
+
+2011-08-19  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java:
+	  Picky white-space cosmetics.
+
+2011-08-19  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Added stub implementation of new MainValuesArtifact.
+
+	* src/main/java/de/intevation/flys/artifacts/MainValuesArtifact.java:
+	  New. Stub implementation for new MainValuesArtifact.
+
+2011-08-19  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	Fixed flys/issue262
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Recommendations.java:
+	  Unified user and system tempate.
+	  Looks for "/artifact-database/metadata/template/text()"
+	  in conf.xml. Defaults to "${artifacts.config.dir}/meta-data.xml". If user id is
+	  given its the default connection for contexts.
+
+	* doc/conf/conf.xml: Adjusted
+	* doc/conf/meta-data-system.xml, doc/conf/meta-data-user.xml: Deleted.
+	* doc/conf/meta-data.xml: Unified version of user and system template.
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/templating/App.java:
+	  Adjusted the test program.
+
+2011-08-18  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	Fixed flys/issue260
+
+	* doc/conf/meta-data-user.xml: Uses master_artifacts view now.
+
+2011-08-18  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/datacage.sql: Added view master_artifacts to select
+	  the master artifacts of the collections more easily.
+	  To upgrade existing database:
+
+	    CREATE VIEW master_artifacts AS
+	        SELECT a2.id             AS id,
+	               a2.gid            AS gid,
+	               a2.state          AS state,
+	               a2.creation       AS creation,
+	               ci2.collection_id AS collection_id
+	        FROM   collection_items ci2 
+	               JOIN artifacts a2 
+	                 ON ci2.artifact_id = a2.id 
+	               JOIN (SELECT ci.collection_id AS c_id, 
+	                            MIN(a.creation)  AS oldest_a 
+	                     FROM   collection_items ci 
+	                            JOIN artifacts a 
+	                              ON ci.artifact_id = a.id 
+	                     GROUP  BY ci.collection_id) o 
+	                 ON o.c_id = ci2.collection_id 
+	        WHERE  a2.creation = o.oldest_a;
+
+	 TODO: Use the view in the templates.
+
+2011-08-18  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/meta-data-user.xml: Removed state filter because it was broken.
+	  Simplified by joining two contexts.
+
+2011-08-18  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/jfree/StickyAxisAnnotation.java:
+	  Fix issues with lines of annotation when zoomed (wrong scale used).
+
+2011-08-18  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Added legend for annotations to LongitudinalSectionDiagram.
+
+	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  Added a pseudo-dataseries/collection to employ existing infrastructure for
+	  displaying localized label for Annotations (yet unthemed).
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties:
+	  Made label-string available for localization.
+
+2011-08-17  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Moved StickyAxisAnnotation into new package de.intevation.flys.jfree .
+
+	* src/main/java/de/intevation/flys/exports/StickyAxisAnnotation.java:
+	  Deleted/moved to src/main/java/de/intevation/flys/jfree/ .
+
+	* src/main/java/de/intevation/flys/jfree/StickyAxisAnnotation.java:
+	  New/moved from src/main/java/de/intevation/flys/export/ , adjusted
+	  package statement, made class public.
+
+	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  Added import statement for de.intevation.flys.jfree.StickyAxisAnnotation .
+
+2011-08-17  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Extracted and renamed CustomAnnotation to StickyAxisAnnotation. Also removed
+	needless imports.
+
+	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java,
+	  src/main/java/de/intevation/flys/exports/StickyAxisAnnotation.java:
+	  Extracted class implementation CustomAnnotation and renamed to
+	  StickyAxisAnnotation.
+
+2011-08-17  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Improved CustomAnnotations and rendering thereof, now including an
+	"axis mark" (little line at axis), also prepared possibility to put
+	annotations on Y-axis.
+
+	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  Improved CustomAnnotation to include marks on the axis and better spacing
+	  from it.
+
+2011-08-17  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Implemented proof-of-concept collision-detection when drawing
+	CustomAnnotations (text only).
+
+	* src/main/java/de/intevation/flys/exports/ChartExportHelper.java:
+	  Pass a fresh ChartRenderingInfo-Object to createBufferedImage, such that
+	  information can be collected while rendering.
+
+	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  Exploit the fact that XYTextAnnotation already registers drawn shape in the
+	  ChartRenderingInfo if it exists and either an URL or tooltip is set.
+	  Before drawing, calculate own shape and compare against already registered
+	  shapes.
+
+2011-08-16  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Implemented (yet dummy) custom Annotation class.
+
+	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  Added implementation of yet dummy CustomAnnotation class.
+
+2011-08-16  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Slightly improved rendering of annotations.
+
+	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  Slightly improved rendering of annotations. Still no valid collision
+	  detection. Annotations are drawn every 2 km; first come first serve.
+
+2011-08-15  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	Fix for flys/issue191
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQ.java(longestIncreasingWRangeIndices):
+	  Added a method to find the longest index range with increasing w values.
+
+	* src/main/java/de/intevation/flys/exports/ATWriter.java: Export the longest
+	  range of monotone increasing w values instead of the first one.
+	  TODO: The first line of the export is still broken.
+
+	* src/main/java/de/intevation/flys/artifacts/AnnotationArtifact.java:
+	  Removed superfluous import.
+
+2011-08-12  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/AnnotationArtifact.java:
+	  Resolved two TODOs: get Annotations of selected River, get "point"
+	  Annotations only.
+
+2011-08-12  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Added functionality to query range and point-annotations only to
+	AnnotationFactory.
+
+	* src/main/java/de/intevation/flys/artifacts/model/AnnotationsFactory.java
+	  (getPointAnnotations, getAnnotationsBreadth):
+	  New functions to query breadth and point-only annotations.
+
+2011-08-11  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Recommendations.java:
+	  Added a development mode for recommendations. Enabled with
+	  stetting system property 'flys.datacage.recommendations.development' to true.
+	  When set the XML template are re-read if the timestamps of the
+	  files have changed so you do not have to restart the server again and again.
+
+	* doc/conf/meta-data-user.xml: Sort collections by creation time in descending order.
+
+2011-08-11  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Rather picky cosmetics only.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java,
+	  src/main/java/de/intevation/flys/artifacts/datacage/templating/Builder.java,
+	  src/main/java/de/intevation/flys/artifacts/datacage/Recommendations.java,
+	  src/main/java/de/intevation/flys/artifacts/model/WQKms.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DefaultState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java,
+	  src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  End comments on a full stop, separate from closing '*/' by whitespace,
+	  adjusted javadoc comments.
+
+2011-08-11  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Made Annotations visible in LongitudinalSection diagrams.
+
+	* src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java,
+	  src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  Register new Facet Type, let LongitudinalSectionGenerator include
+	  Annotations in diagram (yet unfiltered and independent of river).
+
+2011-08-11  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* doc/conf/conf.xml,
+	  doc/conf/artifacts/annotation.xml,
+	  doc/conf/meta-data-system.xml:
+	  Added configuration for AnnotationArtifacts.
+
+2011-08-11  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	Added demo- implementation of a AnnotationArtifact and its Facet.
+
+	* src/main/java/de/intevation/flys/artifacts/AnnotationArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/model/AnnotationFacet.java,
+	  src/main/java/de/intevation/flys/artifacts/states/AnnotationRiverState.java:
+	  New. Initial version of an AnnotationArtifact and its State and Facet.
+
+2011-08-10  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/datacage.sql: Extended schema for artifacts and collections
+	  to have creation times, too.
+
+	  To update existing databases:
+
+	    ALTER TABLE artifacts ADD COLUMN creation TIMESTAMP NOT NULL DEFAULT current_timestamp;
+	    ALTER TABLE collections ADD COLUMN creation TIMESTAMP NOT NULL DEFAULT current_timestamp;
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java:
+	  Store creation times for artifacts and collections, too.
+
+	* src/main/resources/datacage-sql/org-h2-driver.properties,
+	  src/main/resources/datacage-sql/org-postgresql-driver.properties:
+	  Adjusted SQL statements.
+
+2011-08-10  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java:
+	  Make it compilable again (BackendListener interface changed).
+
+2011-08-10  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/meta-data-user.xml: Added grouping element around w/q of each
+	  longitudinal section artifact.
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/templating/CompiledStatement.java,
+	  src/main/java/de/intevation/flys/artifacts/datacage/templating/StackFrames.java:
+	  Added some debugging capabilities.
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/templating/ResultData.java:
+	  Added isEmpty() method.
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/templating/Builder.java:
+	  Now it is possible to nest <dc:elements> into other elements in the <dc:context>
+	  body. This is useful and needed for grouping and repeating results.
+
+2011-08-10  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Recommendations.java:
+	  User connection was cached, system was not. Lead to incorrect results.
+
+2011-08-09  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/meta-data-user.xml: Added <old_calculations> element
+	  around old calculations.
+
+2011-08-09  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/QRangeTree.java:
+	  Cosmetic: Replaced usage of legacy java.util.Stack with java.util.Deque.
+
+2011-08-04  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/meta-data-user.xml: Use 'CAST(x AS uuid)' instead of 'x::uuid'
+	  to be more compatible.
+
+2011-08-04  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Recommendations.java:
+	  If given an artifact place its identifier into parameters passed to template.
+	  Fixed swapped user/system connections if using the user template.
+
+	* doc/conf/meta-data-user.xml: Recommend w/q facet from old calculations
+	  if an artifact was given that represents a longitudinal section
+	  "Laengsschnitt".
+
+	  TODO  I: The template uses PostgreSQL specific UUID casts.
+	  TODO II: We need to find a way only to recommend the master artifacts.
+
+2011-08-04  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/templating/Builder.java:
+	  Added a <dc:comment> tag to place comments in the meta data templates.
+	  <!-- ... --> comments are copied through.
+
+	* doc/conf/meta-data-user.xml: Added a simple test.
+
+2011-08-04  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java:
+	  Be a bit more tolerant about empty strings for UUIDs of artifact and user.
+
+2011-08-03  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	Bring user specific meta data service to life.
+
+	* doc/conf/conf.xml: There are now two templates to configure:
+	  The system template (only the data from the backend) and the
+	  user template (the datcage db and the backend db),
+
+	* doc/conf/meta-data-template.xml: Deleted.
+	* doc/conf/meta-data-user.xml: New. The user specific template. TODO: Write it!
+	* doc/conf/meta-data-system.xml: New. The system template.
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/templating/NoneUserSpecific.java:
+	  Deleted.
+	* src/main/java/de/intevation/flys/artifacts/datacage/Recommendations.java:
+	  New. The logic to fill the templates.
+
+	* src/main/java/de/intevation/flys/artifacts/CollectionMonitor.java:
+	  Adjusted to follow the new call signatures.
+
+	* src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java:
+	  Refactored. Removed the old code and only leave the new service. Following
+	  XPaths are evaluated on the incomming document:
+
+	  "/art:meta/art:artifact-id/@value" The UUID of the artifact. Optional.
+	                                     Used to fill the template enviroment.
+	  "/art:meta/art:user-id/@value"     The UUID of the user. Optional.
+	                                     If given the user specific template is filled.
+	  "/art:meta/art:outs/@value"        The list of outs used to recommend for the
+	                                     various outputs.
+	  "/art:meta/art:parameters/@value"  A list of key/value pairs to inject more
+	                                     filters to the templating.
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/templating/App.java:
+	  Change to follow the new recommendations semantics.
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/templating/Builder.java:
+	  Added symbolic constants to distinguish "user" and "system" db connections.
+
+2011-08-03  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* doc/conf/conf.xml:
+	  Cosmetics, let comments start with a capital and end on a full stop,
+	  removed incorrect comment.
+
+2011-08-03  Felix Wolfsteller <felix.wolfsteller@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Cosmetics, let comments start with a capital and end on a full stop.
+
+2011-08-03  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/CollectionMonitor.java(extractOutputNames):
+	  Fixed potential NPE.
+
+2011-08-03  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	Added support for more than one db connection in datacage templating.
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/templating/Builder.java:
+	  Now you can pass a list of named db connections to the build process.
+	  The purpose is to mix more then one database (e.g. the backend db and
+	  the user specific one).
+
+	  To use this feature you can add an "connection" attribute
+	  to <dc:context> with the name of the connection to use.
+	  If no connection name is given the last used is used again.
+	  Initially the first connection in the given list is used. 
+	  If the context is left the connection that was active before 
+	  will be active again in a stacking manner.
+
+	  When creating NamedConnection objects you can set a boolean flag
+	  if the results coming from the connection should be cached. This
+	  is useful e.g. for the user specific database which runs in-memory
+	  so caching would introduce some superfluous overhead.
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/templating/CompiledStatement.java:
+	  When executing the queries explicitly pass if caching should be used.
+
+2011-08-02  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java:
+	  Forgot to fetch dialect dependent SQL statement for deleting
+	  artifacts by uuid.
+
+2011-08-02  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java:
+	  Set the name of the collections at initial scan, too.
+
+2011-08-02  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java:
+	  Fixed wrong SQL references.
+
+2011-08-02  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java:
+	  Fixed two NPEs.
+
+2011-08-02  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/DatacageBackendListener.java,
+	  src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java:
+	  Forwarded kill collections and artifacts events to datacage.
+	
+	* src/main/resources/datacage-sql/org-h2-driver.properties,
+	  src/main/resources/datacage-sql/org-postgresql-driver.properties:
+	  Added statement to delete artifact by uuid.
+
+2011-08-02  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/DatacageBackendListener.java:
+	  Made it compilable again. The signature of BackendListener has changed.
+
+2011-08-01  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java:
+	  Completed the backend listener stuff.
+
+	  TODO  I: Added some cleanup for orphaned artifacts.
+	  TODO II: Figure out a way to delete collections/artifacts
+	           which are delete from backend without the 
+			   backend API.
+
+	* src/main/resources/datacage-sql/org-h2-driver.properties,
+	  src/main/resources/datacage-sql/org-postgresql-driver.properties:
+	  Added needed statements.
+
+2011-08-01  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java:
+	  Update collection names on change. Remove artifacts from collections.
+
+	* src/main/resources/datacage-sql/org-h2-driver.properties,
+	  src/main/resources/datacage-sql/org-postgresql-driver.properties:
+	  Added needed statements.
+
+2011-08-01  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/DatacageBackendListener.java:
+	  Call datacage with the global context. This is needed to access the state engine.
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java: Changed
+	  signatures to take the global context, too. Create artifacts via backend listener
+	  interface.
+
+2011-08-01  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/DatacageBackendListener.java:
+	  Fixed recursion bug.
+
+2011-08-01  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/DatacageBackendListener.java:
+	  Added debug output.
+
+2011-08-01  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/conf.xml: Added backend listener for datacage.
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/DatacageBackendListener.java:
+	  New. Proxies backend listener calls to datacage.
+	 
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java:
+	  Implements backend listener. TODO: Update the datacage database
+	  according the change calls.
+
+2011-08-01  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta,
+	  src/main/java/de/intevation/flys/artifacts/datacage/templating:
+	  Moved/renamed package to better fit the common semantics.
+	  DataCage.java is now call NoneUserSpecific.java to reflect the
+	  fact that it is the template for the user independent db
+	  analysis.
+
+	* src/main/java/de/intevation/flys/artifacts/CollectionMonitor.java,
+	  src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java:
+	  Ajusted imports and calls.
+
+2011-08-01  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/conf.xml: For documentation purposes added a out-commented 
+	  section with the default configuration of the datacage.
+
+2011-07-31  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java:
+	  Delete the artifacts at before initial scan, too. They are independent
+	  from users. Fixed problem when writing state data content.
+
+	* src/main/resources/datacage-sql/org-h2-driver.properties: Added
+	  statement to delete the artifacts at initial scan, too.
+
+	* src/main/resources/datacage-sql/org-postgresql-driver.properties:
+	  New. PostgreSQL version of the statements. The database scheme
+	  is the same as H2. Very useful for debugging.
+
+2011-07-31  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java:
+	  Added kludge for the types of artifact data. They seem to be null
+	  in some circumstances. Needs to be debugged!
+
+2011-07-31  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/DBConfig.java:
+	  Fixed default connection URL to use a namend in-mermory database.
+
+2011-07-31  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/datacage.sql: Fixed constraint.
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java:
+	  Added some debug output.
+
+2011-07-29  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/datacage.sql: Removed artifact_id from facet because there
+	  is a link via out_id -> outs.id: artifact_id -> artifacts to
+	  find the corresponding artifact.
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java,
+	  src/main/resources/datacage-sql/org-h2-driver.properties: Store
+	  facets of outs into datacage db at initial scan.
+
+2011-07-29  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java,
+	  src/main/resources/datacage-sql/org-h2-driver.properties:
+	  Store outs of artifacts into datacage db at initial scan.
+	  TODO: store facets.
+
+2011-07-29  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/datacage.sql: Added 'type' column in artifacts data.
+	  Maybe useful for filtering.
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java,
+	  src/main/resources/datacage-sql/org-h2-driver.properties:
+	  Store artifact data into db at initial scan.
+	  TODO: store outs and facets.
+
+2011-07-29  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java,
+	  src/main/resources/datacage-sql/org-h2-driver.properties:
+	  Add artifacts into datacage db at initial scan.
+	  TODO: Store data, outs and facets.
+
+2011-07-28  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/datacage.sql: Fixed spelling in sequence name.
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java,
+	  src/main/resources/datacage-sql/org-h2-driver.properties: Simply add
+	  collection item at initial scan if artifact was stored before.
+	  TODO: Store new artifacts.
+
+2011-07-28  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java,
+	  src/main/resources/datacage-sql/org-h2-driver.properties: Add
+	  collections at initial scan.
+
+2011-07-28  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java,
+	  src/main/resources/datacage-sql/org-h2-driver.properties: Add users
+	  at initial scan.
+
+2011-07-28  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/datacage.sql: Using sequences for id generation now
+	  to make schema more compatible.
+
+2011-07-28  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java,
+	  src/main/resources/datacage-sql/org-h2-driver.properties: Clear database
+	  before initial scan.
+
+2011-07-28  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/DBConnection.java:
+	  Deleted. This stuff comes from the artifact database now.
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/DBConfig.java:
+	  New. The db config of the datacage database.
+
+	* src/main/resources/datacage-sql/org-h2-driver.properties: New.
+	  The SQL statements needed for the datacage.
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java:
+	  Make use of the db config.
+
+2011-07-27  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/Datacage.java:
+	  New. A artifact database lifetime listener to build the initial
+	  index of the artifacts in database.
+
+	* doc/conf/conf.xml: Added the datacage to the list of lifetime
+	  listeners.
+
+2011-07-27  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/datacage.sql: Added an explicit table for the outs
+	  of an artifact.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Make the current outs of an artifact accessible only with
+	  the global context.
+	
+2011-07-27  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/datacage.sql: Added ON DELETE CASCADE constraints.
+	  Added state in facet.
+
+2011-07-26  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/datacage.sql: New. H2 Schema for the datacage database.
+	  Uses special features like IDENTITY (autoincrement) typed columns.
+
+	* src/main/java/de/intevation/flys/artifacts/datacage/DBConnection.java:
+	  Pooled connection.
+
+	* pom.xml: Added dependencies to H2 and Apache DBCP.
+
+2011-07-26  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/test/java/de/intevation/flys/artifacts/AppTest.java,
+	  src/main/java/de/intevation/flys/artifacts/App.java: Removed.
+	  This the stupid "Hello, World!" app initially created by the
+	  maven archetype. It was never used.
+
+2011-07-25  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java:
+	  Argh! Usage the DOM was not thread safe (discovered with ab).
+
+2011-07-25  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/meta-data-template.xml: '$recommended' lead to XPath
+	  errors. Using "dc:contains($parameters, 'recommended')" helps.
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java,
+	  src/main/java/de/intevation/flys/artifacts/services/meta/FunctionResolver.java:
+	  Added some debugging.
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/DataCage.java:
+	  Added parameters as 'parameters' to parameters. Usefull to check
+	  for containment of variables.
+
+2011-07-25  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java:
+	  Added 'if log.isDebugEnabled() {}'.
+
+2011-07-25  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java:
+	  Made Artifact UUID optional and accept extra parameters, too. This enables
+	  the service to be used without an arttifact and test all filters.
+
+	  <art:meta xmlns:art="http://www.intevation.de/2009/artifacts">
+	     <art:outs value="computed_discharge_curve,floodmap"/>
+	     <art:parameters value="river:Elbe"/>
+	     <art:filters value="recommended"/>
+	  </art:meta>
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/FunctionResolver.java:
+	  'contain' accept Maps and collection, too.
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/DataCage.java:
+	  Made artifact option (= null) in recommendations.
+
+2011-07-21  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/CompiledStatement.java:
+	  Moved connection specific into inner class. The enables the reuse of the
+	  compiled statement.
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java: The
+	  SQL statements are now only compiled once at creation time of the builder.
+	  Each connection now reuses them.
+
+2011-07-21  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/cache.xml: Added configuration for static datacage db access.
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/App.java: Using
+	  caches seems to need an explicit System.exit().
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/CompiledStatement.java:
+	  Added support for caching the SQL statements and there results.
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java: Some
+	  clean up. Reordered code for performance. Strip SQL statements more
+	  aggressively.
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/ResultData.java:
+	  Made it Serializable.
+
+	* src/main/java/de/intevation/flys/artifacts/cache/CacheFactory.java:
+	  Introduced system property 'flys.artifacts.cache.config.file' to make
+	  the caching configurable without pulling up the whole stack.
+
+2011-07-22  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Prepared the FLYSArtifactCollection to support the storage of already
+	  loaded recommendations in its attribute document.
+
+2011-07-21  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java:
+	  Adjusted to use the DataCage recommendations. The incomming document
+	  can pass the artifacts UUID by '/art:outs/@value' the outs as a
+	  comma separated list in '/art:outs/@value' and optional a set of
+	  filters comma separated in '/art:filters/@value'.
+
+	  If UUID and OUTS are not given the old service is used. This
+	  should be removed as soon as the client uses the new service.
+
+2011-07-21  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/CompiledStatement.java:
+	  Allow '-' in variable names.
+
+2011-07-21  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/meta-data-template.xml: Now, the river-id is really added to
+	  the factory node of the wmsbackground layer.
+
+2011-07-21  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/meta-data-template.xml: Added the river-id to the factory node
+	  of the riveraxis and wmsbackground layer.
+
+2011-07-21  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java,
+	  src/main/java/de/intevation/flys/artifacts/services/MainValuesService.java,
+	  src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java,
+	  src/main/java/de/intevation/flys/artifacts/services/RiverService.java:
+	  Adjusted to implement changed Service interface.
+
+2011-07-21  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Refactored
+	  the method that retrieves the Outputs for the Artifact. Now, we are able
+	  to query the Outputs for the current state, and all outputs separately.
+
+	* src/main/java/de/intevation/flys/artifacts/CollectionMonitor.java: The
+	  recommendations provided by this monitor will take the Outputs of the
+	  current state only into account.
+
+2011-07-21  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/meta-data-template.xml: Added conditions for each output type.
+	  Splitted the "floodmap" output into two parts: a recommended one and a
+	  complete one. The recommended part will only build the document tree for
+	  the recommended artifacts; the complete part will build the whole document
+	  tree that is available for a floodmap.
+
+	* src/main/java/de/intevation/flys/artifacts/CollectionMonitor.java:
+	  This Hook now uses the DataCage to generate the recommended artifacts.
+	  The output-defaults configurtion is needless now.
+
+	* doc/conf/output-defaults.xml: Removed. The configuration of recommended
+	  artifacts takes place in meta-data-template.xml.
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/DataCage.java:
+	  Bugfix: the DataCage didn't start working if its builder was NOT null,
+	  but it shouldn't start if the builder IS null.
+
+2011-07-21  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java:
+	  Now it is possible to directly pass a Node as a root to the builder.
+	  The owning document if fetch by Node.getOwnerDocument(). This is
+	  useful if you want to generate the recommendation directly into
+	  an already existing document under a given node.
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/DataCage.java:
+	  Changed the signature of recommend() to accept a node where to
+	  append the recommendations.
+
+2011-07-20  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java:
+	  Added a macro mechanism:
+
+	    <dc:macro name="keine-fuenf">
+	      <dc:text>'5' ist nicht in der Liste der Outs.</dc:text>
+	    </dc:macro>
+	    <dc:call-macro name="keine-fuenf"/>
+	    <dc:call-macro name="keine-fuenf"/>
+	    <dc:call-macro name="keine-fuenf"/>
+
+	  Macros can be defined everywhere in the template
+	  with 'macro'. There bodies can contain all valid elements
+	  including other 'macro's and 'call-macro's. They are
+	  called with their 'name' with 'call-macro'. The control flow
+	  is continued inside the body of the called macro and 
+	  will continue right after the calling 'call-macro' when
+	  the macro body is finished.
+
+2011-07-20  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java:
+	  Added a new 'if' construct similiar to XSLT:
+
+	    <dc:if test="not(dc:contains($outs, '5'))">
+	        <dc:text>'5' ist nicht in der Liste der Outs.</dc:text>
+	    </dc:if>
+
+	  The control flow is continued inside the 'if' if the 'test' attribute
+	  as an XPath expression on an empty document evalutes to true.
+	  Else the inside is skipped. There is no 'else'. Use 'choose'/'otherwise'
+	  if you need this.
+
+2011-07-20  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/DataCage.java:
+	  Added a recommend() method to generate recommendations for
+	  a given artifact, outs and extra parameters.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added
+	  method to extract all data at once.
+
+2011-07-20  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/FunctionResolver.java:
+	  New. Custom XPath function provider. Provides
+	  'dc:contains(Object [] haystack, Object needle)' by now. Should be
+	  useful to check containments in 'out' lists later.
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java:
+	  Register the FunctionResolver to the evaluated XPaths.
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/App.java:
+	  Added code to parse
+	  "param:a,b,c" to "param" -> new String [] { "a", "b", "c" } to
+	  help testing the 'dc:contains' XPath function.
+
+2011-07-20  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/conf.xml: Added wms configurations for Saar, Mosel and Elbe.
+	  Each river supported by FLYS requires such a WMS configuration. A WMS
+	  should contain layers for the river axis, buildings, kilometer labels
+	  and maybe a background layer as well.
+
+	* src/main/java/de/intevation/flys/artifacts/context/FLYSContext.java:
+	  Added key that is used to store a map of WMS URLs - for each river a
+	  WMS URL.
+
+	* src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java:
+	  Parse the river WMS from global configuration.
+
+	* src/main/java/de/intevation/flys/artifacts/states/RiverAxisState.java:
+	  Create WMSLayerFacets with URLs based on the river and the river wms
+	  configuration stored in the FLYSContext.
+
+	* src/main/java/de/intevation/flys/artifacts/WMSBackgroundArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/RiverAxisArtifact.java:
+	  Adapted the initialize() signature and the method call of computeInit()
+	  which requires a FLYSContext to retrieve the river WMS configurations.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WMSBackgroundState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
+	  Added the context object parameter to the computeInit() method.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Call
+	  initialize() with the context object - which is a FLYSContext or a
+	  CallContext.
+
+2011-07-20  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/App.java:
+	  Check if builder was created properly before using it.
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/StackFrames.java:
+	  Implements now variable provider for XPath expressions.
+	
+	* src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java:
+	  Added new choose/when/otherwise construct similiar to XSLT
+
+	      <dc:choose>
+	         <dc:when test="$river = 'Mosel'">
+	             <dc:text>Es ist die Mosel.</dc:text>
+	         </dc:when>
+	         <dc:when test="$river = 'Saar'">
+	             <dc:text>Es ist die Saar.</dc:text>
+	         </dc:when>
+	         <dc:otherwise>
+	            <dc:text>Es ist weder Mosel noch Saar.</dc:text>
+	         </dc:otherwise>
+	      </dc:choose>
+
+	  A 'choose' block can contain a list of 'when's and an optional
+	  'otherwise'. For each 'when' the test attribute is evaluated
+	  as an XPath expression on an empty document. The result of
+	  the evaluation is taken as a boolean value. If its value is
+	  true the control flow is continued inside the corresponding
+	  'when' and the other choose elements are not tested.
+	  If the value is values the testing continues with the next
+	  'when'. If no 'test' expression is evaluated to true, the
+	  control flow continues inside the 'otherwise'. If no 'otherwise'
+	  is given nothing happens at all.
+
+2011-07-20  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/conf.xml: Added a config section for floodmaps. Currently, the
+	  background layer's url and layername is defined here.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WMSBackgroundState.java:
+	  Read the background layer configuration from conf.xml. Those values are
+	  used to create the WMSLayerFacet.
+
+2011-07-20  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/WMSBackgroundState.java:
+	  The background layer facet will no longer have an extent set.
+
+2011-07-20  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/WMSBackgroundState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/RiverAxisState.java:
+	  Set the extent of the created WMSLayerFacets and i18n its descriptions.
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties: Added I18N strings for the
+	  background an river axis layer.
+
+2011-07-20  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WMSLayerFacet.java:
+	  This facet type has a method to set the extent of a WMS layer. The
+	  extent is written to the facets XML node in toXML() as well.
+
+2011-07-20  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Adapted
+	  the signature of setup() which requires a CallMeta parameter now.
+
+	* src/main/java/de/intevation/flys/artifacts/WMSBackgroundArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/RiverAxisArtifact.java: Use
+	  the CallMeta object retrieved in setup() to call initialize(). It is now
+	  able to i18n things.
+
+2011-07-20  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/App.java: New.
+	  Standalone app to debug the datacage template. To use in a maven environment:
+
+	  -Dmeta.data.template=PATH_TO_META_DATA-TEMPLATE.XML \
+	  -Dmeta.data.parameters=river:Mosel \
+	  -Dmeta.data.output=OUTPUT.XML \
+	  -Dflys.backend.user=DB_USER \
+	  -Dflys.backend.password=DB_PASSWORD \
+	  -Dflys.backend.url=DB_CONNECTION_URL \
+	  -Dexec.mainClass=de.intevation.flys.artifacts.services.meta.App
+
+2011-07-20  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/DataCage.java:
+	  New. First step to factor out the "Datenkorb" logic into a service independent
+	  singleton.
+
+	* src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java:
+	  Uses the "Datenkorb" singleton now.
+
+2011-07-20  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/ManagedFacet.java:
+	  Removed "index" property, because it is already existing in parent
+	  class.
+
+2011-07-19  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java:
+	  Improved error handling.
+
+2011-07-19  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/resources/metadata/template.xml: Deleted.
+
+	* doc/conf/meta-data-template.xml: New. Was template.xml
+
+	* doc/conf/conf.xml: Made meta data template configurable.
+
+	* src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java:
+	  Load template from configuration not from resources.
+
+2011-07-19  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/resources/metadata/template.xml: s/[a-z]+-id/db-id/
+	  Make database ids identifiable with unique name "db-id".
+
+2011-07-19  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/ManagedFacet.java:
+	  Override the toXML() method. Subclasses can now write their own XML
+	  representation.
+
+	* src/main/java/de/intevation/flys/artifacts/model/ManagedDomFacet.java:
+	  New. This ManagedFacet uses an Element (DOM) to store the information
+	  about a facet. The intent of this facet type is to represent a facet
+	  stored in an Collection attribute. Different facets can have different
+	  attributes that we need to parse, but the only thing ManagedFacets need
+	  to do, is to adjust the attributes "active" and "position". So, those
+	  values are set directly on the Element, the other attributes aren't
+	  touched.
+
+	* src/main/java/de/intevation/flys/artifacts/model/ManagedFacetAdapter.java:
+	  New. This facet is a wrapper for another facet. This subclass of a
+	  ManagedFacet overrides the toXML() method. The XML representation is
+	  defined by the inner facet that is stored as member variable. The
+	  ManagedFacet specific attributes "artifact", "facet", "pos" and "active"
+	  are added manually.
+
+	* src/main/java/de/intevation/flys/collections/AttributeWriter.java: Uses
+	  the toXML() method to write a facet node into the attribute document.
+
+	* src/main/java/de/intevation/flys/collections/AttributeParser.java: Uses
+	  the ManagedDomFacet to save the information of a facet which is
+	  contained in the attribute part of a Collection's DESCRIBE document.
+
+	* src/main/java/de/intevation/flys/collections/OutputParser.java: Uses the
+	  ManagedFacetAdapter to save a facet, because we want to keep the
+	  specific facet to be able to write its specific XML representation into
+	  the Collection's DESCRIBE document.
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Adapted the XPath of facets stored in the attribute part of the
+	  DESCRIBE.
+
+2011-07-18  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added a
+	  method that returns the Outputs for the Artifact.
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Adapeted the call of OutputParser.
+
+	* src/main/java/de/intevation/flys/collections/OutputParser.java:
+	  Simplified the code to read the Outputs of Artifacts. This parser will
+	  now longer parse the DESCRIBE documents of the Artifacts, but query the
+	  Outputs via FLYSArtifact.getOutputs() directly.
+
+2011-07-18  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/StaticFLYSArtifact.java:
+	  Adapted the function call of ProtocolUtils.appendOutputModes().
+
+	* src/main/java/de/intevation/flys/artifacts/model/WMSLayerFacet.java:
+	  Override toXML() to add the URL and layernames to the XML representation
+	  of this facet.
+
+2011-07-18  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/wmsbackground.xml,
+	  doc/conf/artifacts/riveraxis.xml: New configurations for an Artifact
+	  that is used as background layer in floodmaps, and an artifact that is
+	  used as layer showing the river axis in a floodmap.
+
+	* doc/conf/output-defaults.xml: New file to configure default artifacts
+	  for specific output states. E.g. the floodmap state recommends a
+	  background layer and a layer displaying the river axis. In suche case,
+	  the floodmap state recommends two artifacts for the two layers.
+
+	* doc/conf/conf.xml: Added new artifacts/artifact-factories and a Hook to
+	  monitor artifacts (-> CollectionMonitor.java).
+
+	* src/main/java/de/intevation/flys/artifacts/model/WMSLayerFacet.java:
+	  New. This facet is used to represent a layer in a map. So, this facet
+	  stores information about a WMS URL and the layer names provided by this
+	  WMS.
+
+	* src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java: Added
+	  facet types for the wmsbackground and riveraxis.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WMSBackgroundState.java,
+	  src/main/java/de/intevation/flys/artifacts/WMSBackgroundArtifact.java:
+	  New. An artifact and its default state. The intent of these classes is
+	  to generate WMSLayerFacets which represent background layers in maps.
+
+	* src/main/java/de/intevation/flys/artifacts/states/RiverAxisState.java,
+	  src/main/java/de/intevation/flys/artifacts/RiverAxisArtifact.java: New.
+	  An artifact and its default state. The intent of these classes is to
+	  generate WMSLayerFacets which represent layers that display a river
+	  axis.
+
+	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
+	  Added the INIT ComputeType.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added a
+	  case for the INIT ComputeType while computing data.
+
+2011-07-18  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
+	  Added a method computeInit() which is called to initialize data/facets
+	  after an artifact has been created.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Repaired
+	  broken XPath.
+
+2011-07-14  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/CollectionMonitor.java:
+	  Removed the code to generate new artifacts. Instead of creating new
+	  artifacts automatically, we decided to suggest creating new artifacts
+	  from specific types. Therefore, the DESCRIBE document of the artifacts
+	  is extended with a node that contains recommended artifact types.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  FLYSArtifacts might be setup with the identifier of an other
+	  FLYSArtifact. Subclasses are able to override a method called
+	  initialize(Artifact, GlobalContext). This might be helpful to extract
+	  required values or clone artifacts.
+
+2011-07-14  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java:
+	  Adapted the signature of createArtifactContext() - it returns an
+	  instance of GlobalContext now.
+
+2011-07-14  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/geom/Lines.java:
+	  Debugged the water fill algorithm. Added a lot of logging.
+
+	* src/main/java/de/intevation/flys/artifacts/charts/CrossSectionApp.java:
+	  Added a text field to give a water level to fill in.
+
+2011-07-14  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Moved code
+	  to create the output modes based on the given facets to FLYSArtifact. In
+	  addition, FLYSArtifact got a new method that returns a specific input
+	  value as string.
+
+	* src/main/java/de/intevation/flys/artifacts/CollectionMonitor.java: New.
+	  This hook monitors the "post-feed" and "post-advance". If the monitored
+	  Artifact's state has configured recommended artifacts, this hook will
+	  create new Artifacts.
+
+	  TODO: We have to add the UUIDs of the new Artifacts to the DESCRIBE
+	  document of the artifact to let the client know, that there are new
+	  recommended Artifacts.
+
+	* src/main/java/de/intevation/flys/artifacts/StaticFLYSArtifact.java: New.
+	  This Artifact is the base class for Artifacts, that represent static
+	  data. E.g. this could be a decoration theme in a chart or a background
+	  layer in the map.
+
+	* src/main/java/de/intevation/flys/artifacts/states/OutputState.java: New.
+	  This state might be used as base class for states, that doesn't require
+	  any user input, but only provide static Facets added by a computeFeed()
+	  operation. So, subclasses need to implement computeFeed() only.
+
+2011-07-13  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/charts/CrossSectionApp.java:
+	  New. Standalone Swing-App to test cross sections from database without the
+	  hassles of our complete software stack. Runnable from a maven environment:
+
+	  $ mvn -e \
+	    -Dflys.backend.user=DB_USER \
+		-Dflys.backend.password=DB_PASSWD \
+		-Dflys.backend.url=DB_CONNECTION_URL \
+		-Dexec.mainClass=de.intevation.flys.artifacts.charts.CrossSectionApp \
+		exec:java
+
+	  You can set the river to be used with the system property 'river'.
+	  Defaults to 'Mosel'.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WSPLGENFacet.java:
+	  Removed superfluous imports.
+
+2011-07-13  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: The FloodMapState has a new Outputmode
+	  called "floodmap" now.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WSPLGENFacet.java: New.
+	  This facet is used to generate WSPLGEN results.
+
+	* src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java: Added
+	  the WSPLGENFacet.
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java:
+	  This state will now generate WSPLGENFacets.
+
+2011-07-12  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/geom/Lines.java:
+	  Fixed corner case.
+
+2011-07-11  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/geom/Lines.java: New.
+	  fillWater() generates a list of wet lines for a given profile and a
+	  given water level.
+
+2011-07-08  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: The
+	  Outputs created while generating the DESCRIBE document will now have the
+	  'type' member set.
+
+	* src/main/java/de/intevation/flys/collections/OutputParser.java: Read the
+	  'type' member from DESCRIBE document.
+
+2011-07-06  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Removed a typo.
+
+2011-07-06  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/DataFacet.java:
+	  DataFacet are now able to store the ID of the state which has created
+	  this Facet.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java:
+	  Initialize DataFacets with the ID of this state. This is necessary to
+	  renew the waterlevel data if it is no longer existing in the cache.
+
+2011-07-06  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/ReportFacet.java: A
+	  report facet can now store the state's id and the artifact's hash value
+	  when it has been created.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java:
+	  Initialize the ReportFacet and WaterlevelFacet with state id and hash
+	  information. This has been necessary to retrieve reports and waterlevels
+	  in states after this one - in states that we need to enter for floodmap
+	  parameterization.
+
+2011-07-05  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/WaterlevelGroundDifferences.java:
+	  Changed the desired UI provider.
+
+2011-07-05  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Added the option to continue the
+	  waterlevel parameterization with the intent to create flood maps.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java:
+	  This state is no longer a final state. The user has the option to
+	  continue with the parameterization for flood maps based on the current
+	  waterlevel. Therefore, this states desires the "continue" UI provider.
+	  Clients should recognice this to just step to the next state or display
+	  a button that lets the user step to the next state manually.
+
+	* src/main/java/de/intevation/flys/artifacts/states/FloodplainChoice.java,
+	  src/main/java/de/intevation/flys/artifacts/states/FloodMapState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/ScenarioSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DGMSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/ProfileDistanceSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WaterlevelGroundDifferences.java:
+	  New. These states are used to parameterize a further calculation type:
+	  flood map.
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties: Required strings for the
+	  flood maps states.
+
+2011-07-04  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	Fix(?) for flys/issue114
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQ.java:
+	  Make guessing a bit more robust.
+
+2011-07-03  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	Added the math needed to calculate "W-Differenzen" in "Laengsschnitten".
+	Needs testing!
+
+	* src/main/java/de/intevation/flys/artifacts/model/NamedObject.java:
+	  Made it an interface to be usable in more than one inheritance chain.
+
+	* src/main/java/de/intevation/flys/artifacts/model/NamedObjectImpl.java:
+	  Implements the NamedObject interface and is the new base class of
+	  WQ and WKmsImpl.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WKms.java:
+	  New. Interface to associate kms with ws.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java:
+	  Changed the base class to NamedObjectImpl. Renamed getKms(int)
+	  to getKm(int) to make clear it return a single scalar value
+	  and fullfil the WKms interface.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WKmsImpl.java:
+	  New. Implements the WKms interface. Intended to be a lightweight
+	  datastore for "zusaetzliche Laengsschnitte" and as results
+	  of the WKmsOperations.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQ.java:
+	  Changed base class to NamedObjectImpl.
+
+	* src/main/java/de/intevation/flys/artifacts/math/WKmsOperation.java:
+	  New. Operations on WKms data.
+	  Currently only the SUBTRACTION operation is implemented. This
+	  one is needed to calculate the "W-Differenzen". The operation
+	  is insensitive about the km directions of the datasets. Missing
+	  values are interpolated linear.
+
+	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java,
+	  src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  Adjusted to satisfy the signature change of WQKMs.
+
+2011-07-01  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/StyledXYSeries.java: New. This
+	  XYSeries stores the style information that should be used to render this
+	  series. These information are stored as raw XML documents. A public
+	  method can be used to apply those style information to a
+	  XYLineAndShapeRenderer.
+
+	  Note: The only two attributes currently supported by StyledXYSeries
+	  items are "linesize" and "linecolor".
+
+	* doc/conf/themes.xml: Added some more basic themes for the four
+	  calculation methods.
+
+	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java: This
+	  generator now tries to apply themes for all series contained in the
+	  chart. If a series is no instance of StyledXYSeries, the default
+	  renderer is used.
+
+	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java,
+	  src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java,
+	  src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java,
+	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java,
+	  src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  Removed the code that had been introduced to adapt renderers statically.
+	  Now, each of these concrete ChartGenerators instantiates StyledXYSeries
+	  items to put the curves into the chart. Those items contain style
+	  information now!
+
+2011-07-01  Ingo Weinzierl <ingo@intevation.de>
+
+	flys/issue135 (Diagramm: Trotz abgeschalteter Themen bleiben Beschriftungen bestehen)
+
+	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java: The way
+	  to store datasets has changed. Until this revision, the concrete
+	  generators managed their own datasets. E.g. the
+	  DischargeLongitudinalSectionGenerator had three datasets: w, q and
+	  corrected w. Now, there are just two datasets, managed by this base
+	  generator - one dataset for the first Y axis and one dataset for the
+	  second Y axis. This makes it easier to remove axes, that have no data to
+	  be displayed. All concrete chart generators have to add their XYSeries
+	  using two methods: addFirstAxisSeries() and addSecondAxisSeries().
+
+	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java,
+	  src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java,
+	  src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java,
+	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java,
+	  src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  Those concrete chart generators no longer manage datasets themself but
+	  they use the two methods described above, to plot the data to the first
+	  or second Y axis.
+
+2011-07-01  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java:
+	  Added the option to use a filter to reduce the number of items returned
+	  by this service.
+
+2011-06-30  Ingo Weinzierl <ingo@intevation.de>
+
+	flys/issue159 (WINFO: Radiobutton - Ortsauswahl bei "W für ungleichwertigen Abflusslängsschnitt" entfernen)
+
+	* doc/conf/artifacts/winfo.xml: Changed the kilometer range input for
+	  calculation 4. This calculation type requires a kilometer range. So,
+	  after choosing the calculation 4, the transition model leads to a state
+	  that just allows the input of a kilometer range with no option to
+	  enter locations.
+
+	* src/main/java/de/intevation/flys/artifacts/states/ComputationRangeState.java:
+	  New. A base state for the kilometer selection for calculations. The
+	  target of this state is to provide facets for the duration curves.
+
+	* src/main/java/de/intevation/flys/artifacts/states/DistanceSelect.java:
+	  New. This state is used to enter a kilometer range. The difference to
+	  the LocationDistanceSelect state is, that there is no option to enter
+	  locations.
+
+	* src/main/java/de/intevation/flys/artifacts/states/RangeState.java:
+	  Improved this state to be the base state for calculation ranges.
+
+	* src/main/java/de/intevation/flys/artifacts/states/LocationSelect.java
+	  src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java
+
+	* src/main/java/de/intevation/flys/artifacts/states/WQSelect.java: This
+	  state no longer inherits from RangeState which now is used as base
+	  state for kilometer ranges.
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties: Added new i18n strings for
+	  the DistanceSelect state.
+
+2011-06-28  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* pom.xml: Downgraded Trove to 1.1-beta-5, because the new
+	  later ones are removed from the maven repos.
+
+	  The functionality we need is in 1.1 so this downgrade should
+	  cause no problems.
+
+	  Would be nice if we would support the maintainers of trove to 
+	  bring there new versions back into the main maven repos.
+
+2011-06-28  Ingo Weinzierl <ingo@intevation.de>
+
+	* pom.xml: Repaired the JBoss repository which place has changed.
+
+2011-06-28  Ingo Weinzierl <ingo@intevation.de>
+
+	Tagged RELEASE 2.4
+
+2011-06-27  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/WaterlevelExporter.java,
+	  src/main/java/de/intevation/flys/exports/WstWriter.java:
+	  Append the corrected W column (if existing) to the WST export.
+
+2011-06-27  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQ.java:
+	  Guessing increaing w is not based on direct neighbors any more.
+	  The second to be compared with is choosen by random of
+	  the values before the first one. This makes the guessing
+	  more robust against 'plateaus' of equal w values.
+
+2011-06-27  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/ATWriter.java: Array
+	  for constructing the spline was too large leading to non-increasing
+	  values.
+
+2011-06-27  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	Fix for flys/issue150
+
+	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java,
+	  src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  Invert the x axis if its guessed that water is increasing.
+
+2011-06-27  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQ.java(guessWaterIncreasing):
+	  Added a method to guess based on a given factor of the size (default 0.05)
+	  if the water levels are increasing. Needed to determine in which direction
+	  the water level curve should be orientated. Based on random to avoid
+	  running over large dataset each time a diagram is generated.
+
+2011-06-27  Ingo Weinzierl <ingo@intevation.de>
+
+	  flys/issue177 (WINFO: Abflusskurven am Pegel verursachen ein Hängen des Servers)
+
+	* src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
+	  Commented out code to generate time ranges for series names. There
+	  seems to be a problem while loading the discharge tables of a gauge or
+	  while determining the start and/or end time of such discharge tables.
+
+2011-06-26  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/**/*.java: Removed trailing whitespace.
+
+2011-06-26  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Removed dead code.
+
+2011-06-26  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	Fix for flys/issue173
+
+	* src/main/java/de/intevation/flys/artifacts/model/Calculation4.java:
+	  Fixed the way the gauge was found for a given interval.
+	  The old way does not work because it was just tested if
+	  the station point was inside the segments which is not
+	  necessarily true. The obvious solution to simply check
+	  the overlapping intervals does not work either because
+	  the gauge ranges touch each other and so more than
+	  one gauge are returned in these cases. The River.maxOverlap()
+	  is now used to find the gauge with the max overlapping
+	  range.
+
+2011-06-26  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	Fix for flys/issue147
+
+	* src/main/java/de/intevation/flys/artifacts/model/Calculation1.java:
+	  Removed the 'kmUp' flag. It was an left over from former
+	  WSP calculations (w/o ref km) leading to wrong results now.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Don't pass the kmUp flag to the calculation.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Added debug output to see the value of 'wq_free'.
+
+2011-06-26  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	Fix for flys/issue86
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  The reference gauge for calculations "am Pegel" was determined
+	  wrong.
+	  
+2011-06-25  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
+	  Conversion w->q was broken. This should fix a number of issues
+	  around "W am Pegel" calculations.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Issue an error report if a w->q conversion fails.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  The gauge to convert w->q with its discharge table was determined wrong.
+
+2011-06-24  Ingo Weinzierl <ingo@intevation.de>
+
+	  flys/issue174 (Diagramm: Q-Linie wird bei initialem Laden des Diagramms
+	  anders dargestellt als bei Ansicht auf gesamten Wertebereich)
+
+	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  The chart will now have upper margins again.
+
+2011-06-24  Ingo Weinzierl <ingo@intevation.de>
+
+	  flys/issue172 (Diagramm: Ursprung der Diagramme bei Dauerzahlen)
+
+	* src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java:
+	  Charts of this type will have the lower X value set to "0".
+
+2011-06-23  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/ATWriter.java:
+	  Results are now in cm. Made it more robust against corner cases.
+
+	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
+	  Removed superfluous import.
+
+2011-06-23  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml, doc/conf/conf.xml:
+	  Added facet config for AT exports.
+
+	* src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java:
+	  Added 'at' facet type.
+
+	* src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java:
+	  Generate AT facets.
+	
+2011-06-23  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/ATExporter.java: New.
+	  Exporter for AT facets. Needs testing.
+
+2011-06-23  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/ATWriter.java: New.
+	  Writer for AT files. New code because our data model differs
+	  from Desktop-FLYS. Needs testing.
+
+2011-06-23  Ingo Weinzierl <ingo@intevation.de>
+
+	  flys/issue157 (Diagramm: Ursprung berechnete Abflusskurve)
+
+	* src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java,
+	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
+	  Moved the method that adjusts the X-axis to include the "0" value from
+	  ComputedDischargeCurveGenerator to DischargeCurveGenerator. Now, both
+	  charts will include the "0" on the X-axis.
+
+2011-06-23  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQDay.java:
+	  Based on WQ now to make it exportable as AT.
+
+2011-06-23  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQ.java:
+	  New. Base class for WQKms.
+
+	  TODO 1: make it a base class for WQDay, too,
+	  TODO 2: Generate instances of WQ instead of WQKms in "Abflusskurven"
+	          calculations. This will save memory.
+
+	  AT exporter will get instances of this class as data model
+
+	* src/main/java/de/intevation/flys/artifacts/model/NamedObject.java:
+	  Add default constructor to ease inheritance.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java:
+	  Based on WQ now. Removed code allready defined in base class.
+
+2011-06-23  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Add TODOs for error reports
+	  of "Abflusskurven am Pegel". Maybe we don't need them?
+
+	* doc/conf/conf.xml: Configure report for each calculated output type.
+
+2011-06-22  Ingo Weinzierl <ingo@intevation.de>
+
+	  flys/issue164 (Berechnung 4: Umgekehrtes Berechnungsintervall führt zur)
+
+	* src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java:
+	  Create the items with range information for W and Q which allows the
+	  client to validate the user inserted values.
+
+2011-06-21  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Arguments in filling datastructure were flip. Now
+	  the "Abflusskurve am Pegel" looks correct again.
+
+	* src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
+	  Removed superfluous imports.
+
+2011-06-21  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	Improved situtation on rendering "Abflusskurve am Pegel". Not
+	fully working, yet.
+
+	* doc/conf/artifacts/winfo.xml: Generate facets for the location path, too.
+
+	* src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java: Misspelled
+	  the facet which prevented the facets from being to the outputs.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WaterlevelFacet.java:
+	  Extended to store the hash and the state id of the producing artifact/state
+	  else it results in NPEs because the data is calculated on later (wrong) states.
+
+	* src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java:
+	  Store the state id and the hash in the facet, too.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Add two
+	  method to do calculations for a state the artifact is currently not in
+	  and fetching the current state id.
+
+2011-06-21  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Generate facets for "Abflusskurven am Pegel"
+	  Not working by now. :-/
+
+	* src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java: New facet type
+	  for "Abflusskurven am Pegel"
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Do calculation
+	  in the artifact not in the output generator.
+
+	* src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java:
+	  Generate the new facets.
+
+	* src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
+	  Fetch data from facet.
+
+2011-06-22  Ingo Weinzierl <ingo@intevation.de>
+
+	  flys/issue161 (Diagramm: Q-Achse in W-Längsschnitten immer bei Q=0)
+
+	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  The Q axis (which is the second y axis) initially contains the 0 value.
+	  After a zoom action has taken place, this behaviour is no longer
+	  supported.
+
+2011-06-21  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	Draw correction curve again.
+
+	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java:
+	  Use correction curve to map plot to axes. Not doing so prevented
+	  the correction curve from being drawn!
+	  Smaller code cleanups and simplifications.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java,
+	  src/main/java/de/intevation/flys/artifacts/model/WQCKms.java:
+	  Added methods to directly access the components w, q and c
+	  at a given index.
+
+	* src/main/java/de/intevation/flys/exports/ChartGenerator.java:
+	  Attribute access via DOM instead of XPath.
+
+	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  Code simplification.
+
+2011-06-21  Ingo Weinzierl <ingo@intevation.de>
+
+	  flys/issue157 (Diagramm: Ursprung berechnete Abflusskurve)
+
+	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Splitted
+	  up zooming for x and y axes to be able to override specific axis
+	  zoom behaviour.
+
+	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
+	  The lower bound of the x axis (which is the Q axis in such chart) is
+	  always 0.
+
+2011-06-21  Ingo Weinzierl <ingo@intevation.de>
+
+	  flys/issue90 (Diagramm: Trennung derDiagrammfläche und Achsenaufheben)
+
+	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java:
+	  Added a margin between chart data and chart axes.
+
+2011-06-21  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	Fix for flys/issue158
+
+	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionExporter.java:
+	  Checks for right class now.
+	
+2011-06-21  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	Fix for flys/issue154
+
+	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java:
+	  Checks for right class now.
+
+2011-06-21  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Only generate 'outs' if they have facets.
+
+	* src/main/java/de/intevation/flys/exports/ChartExportHelper.java:
+	  'boolean ? true : false' <=> 'boolean'
+
+2011-06-21  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Added the time-to-live to the DESCRIBE document.
+
+2011-06-20  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Configured states to generate report facets.
+
+2011-06-20  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/ReportFacet.java:
+	  Return the report.
+
+	* src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DischargeLongitudinalSection.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java:
+	  Generate report facets if there are problems with the calculations.
+	  TODO: Adjust winfo.xml to configure the facets.
+
+2011-06-20  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/ReportGenerator.java:
+	  New. Generator for calculation reports.
+
+	* doc/conf/conf.xml: Added ReportGenerator.
+
+	* src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java:
+	  Added type 'report'.
+
+	* src/main/java/de/intevation/flys/artifacts/model/ReportFacet.java:
+	  Specialized facet for serving reports. TODO: Added them to the
+	  calculation states.
+
+	* src/main/java/de/intevation/flys/artifacts/model/Calculation.java:
+	  Looped through CallMeta for i18n purposes. TODO: do i18n
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Removed superfluous import.
+
+	* src/main/java/de/intevation/flys/exports/AbstractExporter.java:
+	  Added some override annotations.
+
+2011-06-20  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/CalculationResult.java:
+	  New. Used to transport the data and the error report.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WaterlevelFacet.java,
+	  src/main/java/de/intevation/flys/artifacts/model/Calculation1.java,
+	  src/main/java/de/intevation/flys/artifacts/model/Calculation2.java,
+	  src/main/java/de/intevation/flys/artifacts/model/Calculation3.java,
+	  src/main/java/de/intevation/flys/artifacts/model/Calculation4.java,
+	  src/main/java/de/intevation/flys/artifacts/model/DurationCurveFacet.java,
+	  src/main/java/de/intevation/flys/artifacts/model/Calculation.java,
+	  src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DischargeLongitudinalSection.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java,
+	  src/main/java/de/intevation/flys/exports/WaterlevelExporter.java,
+	  src/main/java/de/intevation/flys/exports/DurationCurveExporter.java:
+	  Use the CalculationResult now.
+
+2011-06-18  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/Calculation1.java:
+	  Allow an explicit reference km to enable calculation "am Pegel".
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  If a calculation "am Pegel" is done, take start km of the
+	  calculation range and find the gauge in which range it is located.
+	  Take the station of the gauge as the reference km. If no gauge
+	  is found the calcualtion falls back to calculation "auf freier Strecke".
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Replaced another inefficient attribute extraction via XPath
+	  with direct DOM access.
+
+2011-06-18  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java,
+	  src/main/java/de/intevation/flys/exports/WaterlevelExporter.java,
+	  src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  Removed dead code.
+
+2011-06-18  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/DataFacet.java
+	  src/main/java/de/intevation/flys/artifacts/model/WaterlevelFacet.java,
+	  src/main/java/de/intevation/flys/artifacts/model/DurationCurveFacet.java,
+	  src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DischargeLongitudinalSection.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java,
+	  src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Only generate facets when needed.
+
+	* src/main/java/de/intevation/flys/collections/OutputParser.java:
+	  Removed more XPath for simply accessing attributes of an element.
+
+	* doc/conf/cache.xml: 200 elements in memory for "computed.values" are enough,
+	  LRU as eviction strategy is sufficent.
+
+	* src/main/java/de/intevation/flys/collections/AttributeWriter.java,
+	  src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Use
+	  more 'standard' Java naming conventions.
+
+2011-06-17  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	Merged in the facet-slt branch to bring in the 'facet' feature.
+
+	* doc/conf/artifacts/winfo.xml: Fixed some facets.
+
+	* doc/conf/cache.xml: Added a "computed.values" cache to store the
+	  results of the WINFO calculations.
+
+	* src/main/java/de/intevation/flys/artifacts/model/ManagedFacet.java:
+	  Add support for index per facet to make them unique and identifiable.
+
+	* src/main/java/de/intevation/flys/artifacts/model/FacetTypes.java:
+	  New. Inteface to be used to access the facet names of the configuration.
+
+	* src/main/java/de/intevation/flys/artifacts/model/DataFacet.java: New.
+	  A facet to be used to have raw access to the computed data of an artifact.
+	  Useful to export things like CSV and WST.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WaterlevelFacet.java: New.
+	  Specialized facet to access the water level data stored in WQKms arrays.
+
+	* src/main/java/de/intevation/flys/artifacts/model/DurationCurveFacet.java: New.
+	  Specialized facet to access the duration data stored in WQDay data structures.
+	  
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Facets are
+	  now generated dynamically from the current available ones stored with
+	  the artifact.
+
+	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: Added
+	  methods computeAdvance() and computeFeed() called if artifact is fed or
+	  adance. This overwritten in subclasses to do the state depending calculations.
+
+	* src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DischargeLongitudinalSection.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WaterlevelState.java: These
+	  states overwrites the computeAdvance() and computeFeed() methods to do
+	  the corresponding WINFO calculations.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Calls 
+	  computeAdvance() and computeFeed() if artifact is fed or advanced. Centralized
+	  the caching mechanism.
+
+	* src/main/java/de/intevation/flys/exports/AbstractExporter.java,
+	  src/main/java/de/intevation/flys/collections/AttributeParser.java,
+	  src/main/java/de/intevation/flys/collections/OutputParser.java,
+	  src/main/java/de/intevation/flys/collections/AttributeWriter.java,
+	  src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Adjusted the code to cope with the indices of the facets. Used
+	  DOM to access the attributes instead of XPath. Removed smaller bugs
+	  concerning position generation.
+
+	* src/main/java/de/intevation/flys/exports/ChartInfoGenerator.java,
+	  src/main/java/de/intevation/flys/exports/ChartGenerator.java,
+	  src/main/java/de/intevation/flys/exports/OutGenerator.java:
+	  Forwarded facet references.
+
+	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java,
+	  src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java,
+	  src/main/java/de/intevation/flys/exports/DurationCurveExporter.java,
+	  src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionExporter.java,
+	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java,
+	  src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java,
+	  src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java,
+	  src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java,
+	  src/main/java/de/intevation/flys/exports/WaterlevelExporter.java:
+	  Uses facets to fetch data and generate output now.
+
+2011-06-17  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Added a new parameter "wq_free" that
+	  determines the mode of calculation 1. If it is "false" (default),
+	  the calculation should be bound to a gauge.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added a
+	  method to retrieve the information about the "wq_free" parameter.
+
+2011-06-17  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Added a facet for corrected W in
+	  computation 4.
+
+2011-06-14  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java:
+	  Got rid of namespace in result document.
+
+2011-06-14  Ingo Weinzierl <ingo@intevation.de>
+
+	  flys/issue77 (Diagramm: Beschriftung der Kurven bei Dauerlinien)
+
+	* src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java:
+	  Give the curves in the chart names.
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties: Added titles for duration
+	  chart curves.
+
+2011-06-14  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java:
+	  Write top 'Oberkante' and bottom 'Unterkante' to out going XML
+	  if they exist.
+
+2011-06-14  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java:
+	  Write the min/max W/Q ranges as art:range elements into the DESCRIBE.
+
+2011-06-14  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/LocationSelect.java:
+	  This state that is used to retrieve locations will now write the
+	  kilometer range of the selected river into the DESCRIBE document.
+
+2011-06-10  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/Calculation1.java:
+	  New. Factored out version of "Wasserspiegellage" calculation.
+	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java:
+
+	  Removed some dead code.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQCKms.java:
+	  Added Override annotation and used quick access method.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  Looped through error reporting use by interpolate.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Used factored out version of calculation 1. Removed dead code.
+
+2011-06-10  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/Calculation2.java:
+	  New. Factored out version of "Abflusskurve".
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  Loop errors through w/q at km interpolation.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Use factored out version of calculation 2.
+
+2011-06-10  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/Calculation3.java:
+	  New. Factored out version of "Dauerzahlen".
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  Loop errors through for q->w interpolations.
+	  
+	* src/main/java/de/intevation/flys/artifacts/model/WQDay.java:
+	  Added constructor to directly create with calculated results.
+
+	* src/main/java/de/intevation/flys/artifacts/model/Calculation.java:
+	  Added method to return the number of problems.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Use factored out version of calculation 3.
+
+2011-06-10  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java,
+	  src/main/java/de/intevation/flys/artifacts/model/WQCKms.java,
+	  src/main/java/de/intevation/flys/artifacts/model/WQDay.java:
+	  Added methods to remove NaN values.
+
+2011-06-10  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/Calculation.java:
+	  New. Base class for calculations. Used to collect problems occuring
+	  during calculation.
+
+	* src/main/java/de/intevation/flys/artifacts/model/Calculation4.java:
+	  Extends Calculation now. Looped through the problem reports to
+	  base class.
+
+	* src/main/java/de/intevation/flys/artifacts/math/BackJumpCorrector.java:
+	  Looped through the problem reports.
+
+2011-06-09  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/InfoGeneratorHelper.java:
+	  Append the min/max range and a transformation matrix for each axis.
+
+	* src/main/java/de/intevation/flys/exports/ChartInfoGenerator.java:
+	  Instantiate the InfoGeneratorHelper with a XYChartGenerator instance.
+
+	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java:
+	  Changed the zoom operation. The zoom values defined in the chart request
+	  document are no longer absolute values for a specific axis. Those values
+	  represent percental values for the start and end point of x and y axes.
+	  E.g. a chart has three axes with the following ranges:
+	    - x axis  :  0 - 10
+	    - y axis 1: 20 - 40
+	    - y axis 2: 40 - 90
+	    - zoom values for x: 0.1 - 0.9 (10% - 90%)
+	    - zoom values for y: 0.2 - 0.8 (20% - 80%)
+	  The produced chart will have the following ranges:
+	    - x axis  :  1 - 9
+		- y axis 1: 24 - 36
+		  y axis 2: 50 - 80
+
+2011-06-09  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java,
+	  src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java:
+	  Map datasets to axes correctly.
+
+2011-06-08  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/Calculation4.java:
+	  Determine the gauges by their station positions. This hopfully
+	  fixes the problem with wrong assigned gauges and invalid segments.
+
+2011-06-08  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/Segment.java,
+	  src/main/java/de/intevation/flys/artifacts/model/Calculation4.java:
+	  Added more debug output.
+
+2011-06-08  Ingo Weinzierl <ingo@intevation.de>
+
+	  flys/issue103 PART 1 (WINFO: Wasserspiegellagenberechnung / Layout-Inkonsistenz)
+
+	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
+	  Selected values are formatted with the current locale. The static part
+	  of the DESCRIBE document will now contain i18n formatted numbers.
+
+2011-06-08  Ingo Weinzierl <ingo@intevation.de>
+
+	  flys/issue93 (WINFO: Benennung der Berechnungsart korrigieren)
+
+	* src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_de.properties: Changed the name of
+	  calculation 4.
+
+2011-06-08  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java:
+	  Made the range determination more robust against NaN values.
+
+2011-06-08  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  The second y axis is set to position "1". It was set to "2" before, but
+	  in that case, there was no position "1".
+
+2011-06-08  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/WaterlevelExporter.java,
+	  src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java,
+	  src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionExporter.java,
+	  src/main/java/de/intevation/flys/exports/DurationCurveExporter.java,
+	  src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java,
+	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java,
+	  src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java:
+	  s@m³/s@m\\u00b3/s@
+
+2011-06-08  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/InfoGeneratorHelper.java:
+	  Only generate an axis element if a axis really exists.
+
+2011-06-07  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/math/BackJumpCorrector.java:
+	  Simpified array swapping.
+
+2011-06-07  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Use java.util.List instead of java.util.Vector
+
+	* src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DischargeLongitudinalSection.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java,
+	  src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Removed superfluous imports.
+
+2011-06-07  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
+	  createItem() is not abstract any longer to avoid code repetitionin sub classes.
+
+	* src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WQSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DischargeLongitudinalSection.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java:
+	  Removed duplicated code, inserted default constructors and Override annotations.
+
+2011-06-07  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/InfoGeneratorHelper.java:
+	  Append axes range information to the info document.
+
+2011-06-07  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  If feed() fails do not store invalid values in database.
+
+2011-06-06  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/InfoGeneratorHelper.java:
+	  Removed asymmetrical "- 1" from width calculation.
+
+2011-06-05  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/Calculation4.java:
+	  Fixed problem when more than one value per segment are given.
+
+2011-06-05  Sascha L. Teichmann <sascha.teichmann@intevation.de>
+
+	Refactored version of "Berechnung 4"
+
+	* src/main/java/de/intevation/flys/artifacts/model/Segment.java:
+	  Added instance fields for a reference point (= location of gauge)
+	  and backup of values (needed for naming).
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQCKms.java:
+	  Added a constructor to be created from a WQKms. This is helpful
+	  if a WQKms is replaced by a back jump correction.
+
+	* src/main/java/de/intevation/flys/artifacts/model/Calculation4.java:
+	  New. Outfactored version of "W bei ungleichmaessigen Abflusslaengsschnitt".
+	  Much cleaner now and it should have a better handling of the corner
+	  cases.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  Removed the linear interpolation stuff. It is now in Linear. Removed
+	  the LinearRemap interpolation method because it is not needed any
+	  longer. Added a method to interpolate a given km with a given
+	  function.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Removed the old calc 4 and used the new one.
+
+	* src/main/java/de/intevation/flys/artifacts/math/LinearRemap.java:
+	  Deleted. Not needed any longer.
+
+	* src/main/java/de/intevation/flys/artifacts/math/Function.java:
+	  New. Interface for a uni-variate real function.
+
+	* src/main/java/de/intevation/flys/artifacts/math/Identity.java:
+	  New. Implements Function with f(x) = x
+
+	* src/main/java/de/intevation/flys/artifacts/math/Linear.java:
+	  New. Implements Function with f(x) = m*x + b
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Factored some stuff out to DoubleUtil. Removed some dead code.
+	  Does some rounding correct.
+
+	* src/main/java/de/intevation/flys/utils/DoubleUtil.java: New.
+	  Centralized utils surrounding common double operations.
+
+	* src/main/java/de/intevation/flys/exports/ChartInfoGenerator.java:
+	  Removed superfluous imports.
+
+2011-06-03  Ingo Weinzierl <ingo@intevation.de>
+
+	  flys/issue90(Diagramm: Trennung der Diagrammfläche und Achsen aufheben)
+
+	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java:
+	  Determine the ranges of x and y axes. If no zoom ranges are given, we
+	  will determine the min and max xy values in the dataset manually,
+	  because JFreeCharts adds a margin to the left and right of the data
+	  area automatically..
+
+2011-06-03  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Moved
+	  the chart creation into an own public method. This lets the
+	  ChartInfoGenerator create charts without duplicating code.
+
+	* src/main/java/de/intevation/flys/exports/ChartInfoGenerator.java:
+	  Limited the possible class for generators to XYChartGenerator. This
+	  enables the ChartInfoGenerator class to do the whole chart creation
+	  stuff itself without outsourcing the code to concrete subclasses.
+
+	* src/main/java/de/intevation/flys/exports/LongitudinalSectionInfoGenerator.java,
+	  src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionInfoGenerator.java,
+	  src/main/java/de/intevation/flys/exports/DurationCurveInfoGenerator.java,
+	  src/main/java/de/intevation/flys/exports/DischargeCurveInfoGenerator.java,
+	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveInfoGenerator.java:
+	  Removed the code to generate charts - this is done in ChartInfoGenerator
+	  now.
+
+2011-06-03  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/ChartGenerator.java: Added new
+	  methods to extract the x and y ranges from request document.
+
+	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Added a
+	  method that zooms the chart to the specified x and y ranges.
+
+2011-06-02	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* doc/conf/conf.xml: Set collection ttl to 6 hours.
+
+2011-06-01	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/Segment.java:
+	  New. Parse segments only once.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Expose new parser to artifacts. TODO: Use it.
+
+2011-06-01	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  Changed interpolation methods to interpolate to an arbitrary position
+	  in a given double result array as a preparation for segment independent
+	  calculation.
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Removed superfluous import.
+
+	* src/main/java/de/intevation/flys/artifacts/math/BackJumpCorrector.java:
+	  Fixed cause for crashing: Run back too far in some siutations.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Refactored range code a bit. Needs more work.
+
+2011-06-01  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/InfoGeneratorHelper.java:
+	  Interchange the lower and upper x value of the chart if the x-axis is
+	  inverted before the matrix values are computed. Now, the matrix is able
+	  to work with charts that have an inverted x-axis.
+
+2011-06-01  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/ChartInfoGenerator.java: New. A
+	  chart info generator generates a document that contains meta information
+	  for a specific chart. Concrete instances of this abstract class need to
+	  instantiate concrete ChartGenerators and dispatch nearly all methods of
+	  an OutGenerator (init(), doOut(), setMaster()) to this instance. The
+	  generate() method is implemented in the ChartInfoGenerator itself. It
+	  creates a chart with help of the ChartGenerator instance and builds a
+	  document that contains meta information of this chart.
+
+	* src/main/java/de/intevation/flys/exports/InfoGeneratorHelper.java: New.
+	  This helper is used to create the chart info document. At the moment,
+	  the only information that is included in this document is a
+	  transformation matrix to transform image coordinates into chart
+	  coordinates.
+
+	  NOTE: The transformation matrix creation needs some work to support
+	  charts with inverted X axis.
+
+	* src/main/java/de/intevation/flys/exports/LongitudinalSectionInfoGenerator.java,
+	  src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionInfoGenerator.java,
+	  src/main/java/de/intevation/flys/exports/DurationCurveInfoGenerator.java,
+	  src/main/java/de/intevation/flys/exports/DischargeCurveInfoGenerator.java,
+	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveInfoGenerator.java:
+	  Concrete instances of ChartInfoGenerator that create the chart info for
+	  the currently supported chart types.
+
+	* doc/conf/conf.xml: Registered new OutGenerators.
+
+2011-05-31  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Added support for the 'type' paramter of the collection's out()
+	  operation.
+
+2011-05-31	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  Use an explicit reference km for interpolation now.
+
+2011-05-30	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* doc/conf/cache.xml: Introduced cache to store the distance info per river.
+	  This boosts performance in following ab setup from  3.61 to 39.91 requests/secs.
+
+	  $ ab -c 20 -n 1000 -p distances.xml http://127.0.0.1:8181/service/distanceinfo
+
+	  $ cat distances.xml
+	    <?xml version="1.0" encoding="UTF-8"?>
+	    <art:river xmlns:art="http://www.intevation.de/2009/artifacts">Elbe</art:river>
+
+	* src/main/java/de/intevation/flys/artifacts/model/AnnotationsFactory.java: Added
+	  an iterator result to avoid construction expensive interim lists.
+
+	* src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java: Use
+	  the cache if configured.
+
+2011-05-30	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	flys/issue82
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Only successful interpolations are named.
+
+2011-05-27	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/math/BackJumpCorrector.java:
+	  Make it work independent of river flow direction.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java:
+	  Fixed bug in ordering segments
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Re-enabled
+	  calculation of the back jump correction. Fixed more flow direction issues.
+	  
+2011-05-27  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Removed call of XMLDebug class which is not in the version control.
+
+2011-05-27  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Moved the code part that skips themes right after the part that sets the
+	  master artifact for the OutGenerator. We need this master artifact to
+	  display empty charts - master artifact is used to create titles and
+	  axes.
+
+2011-05-27  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Deactivated themes are not put into the chart.
+
+2011-05-27  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/AttributeParser.java:
+	  Repaired broken XPath expressions to find the output modes in an
+	  attribute document of a collection.
+
+	* src/main/java/de/intevation/flys/collections/AttributeWriter.java: This
+	  writer will now create a document that has a root node art:attribute.
+	  Before these changes, the document's root node was art:outputs which is
+	  part of the attribute document but not the right root node.
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Adapted some XPath expressions and corrected the the process to create
+	  attribute documents.
+
+2011-05-26	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/math/LinearRemap.java:
+	  Made it work independent of from/to order.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Added method to extract the ranges correctly from data.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Use the correct ranges. Comment out backjump detection temporarily.
+
+2011-05-26	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java:
+	  Generate fields for w/q input depend on flow direction.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Moved km up question out of loop.
+2011-05-26	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Take the flow direction into account.
+
+	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
+	  Prevent NPE.
+
+	* src/main/java/de/intevation/flys/artifacts/states/RangeState.java:
+	  Allow to be 'from' greater than 'to' in ranges.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Negate
+	  step if 'from' is greater than 'to'.
+
+2011-05-26	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Round exploded values to a precision of 1e-6.
+
+2011-05-25	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	Qs are now stored in ranges for each column.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTableFactory2.java:
+	  Deleted.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTableFactory.java:
+	  Was WstValueTableFactory2.
+
+	* src/main/java/de/intevation/flys/artifacts/model/QRangeTree.java: Fixed
+	  node linking bug. Removed dead code.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  Q values are now stored in range trees by each column. The qs of the rows
+	  are removed and the calculations are adjusted. Removed dead code.
+
+2011-05-24	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTableFactory.java:
+	  Moved cache name to WstValueTableCacheKey. Do not cache null references.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTableCacheKey.java:
+	  Moved cache name into this class.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  Store QRangeTree for each column of value table. TODO: Use them!
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTableFactory2.java:
+	  Intended as a replacement for WstValueTableFactory, but is work in progress.
+
+	* src/main/java/de/intevation/flys/artifacts/model/QRangeTree.java: Fixed
+	  index errors and added methods to dump as graphviz graph.
+
+2011-05-24  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/WQSelect.java:
+	  Improved the validation of WQ values.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Use the
+	  correct input data object to determine the selected WQ mode (range or
+	  single input).
+
+2011-05-24  Ingo Weinzierl <ingo@intevation.de>
+
+	  ISSUE-40 (part I/II)
+
+	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
+	  Write default values (values already selected by the user before) of the
+	  input data items into DESCRIBE.
+
+2011-05-24  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java:
+	  Removed needless imports.
+
+2011-05-24  Ingo Weinzierl <ingo@intevation.de>
+
+	  ISSUE-85 (part III/III)
+
+	* src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java:
+	  Added a static function that returns the kilometer values (double[])
+	  from locations input (whitespace separated double values).
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Adapted
+	  the getKms() method. It will now return a computed array of kilometers
+	  if we had inserted a range, or it will return the inserted kilometers if
+	  we had inserted locations.
+
+2011-05-24	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTableFactory.java:
+	  Moved cache key to separate class.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTableCacheKey.java:
+	  New. The new cache key class.
+
+2011-05-24	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/QRangeTree.java:
+	  Model to store the q values of a WST column efficiently. First
+	  building block not to store the q values directly aside the
+	  w values.
+
+2011-05-24  Ingo Weinzierl <ingo@intevation.de>
+
+	  ISSUE-85 (part I/III)
+
+	* doc/conf/artifacts/winfo.xml: Added two further field 'ld_mode' and
+	  'ld_locations' to the range/locations state to track the selected mode
+	  and locations.
+
+	* src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java:
+	  Added methods to validate the user inserted locations.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added a
+	  method to determine of a range or locations have been inserted.
+
+2011-05-23  Ingo Weinzierl <ingo@intevation.de>
+
+	  ISSUE-62 (part II/II)
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Dump the
+	  artifacts state/data in DEBUG mode in describe().
+
+	* src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DefaultState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WQSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/LocationSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java,
+	  src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java:
+	  States will no longer store data. The only reason for states storing
+	  StateData is to know about the necessary data for this state. If a State
+	  needs to access the user input for a specific StateData object, it needs
+	  to query the FLYSArtifact which stores the data.
+
+2011-05-23  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added a
+	  method to dump the artifacts state(s)/data.
+
+2011-05-23	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	flys/issue84
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstFactory.java:
+	  Forget to select wst kind.
+	  
+2011-05-20	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	flys/issue81
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  weights for kms were swapped. 
+
+2011-05-20  Ingo Weinzierl <ingo@intevation.de>
+
+	Tagged RELEASE 2.3.1
+
+2011-05-20  Ingo Weinzierl <ingo@intevation.de>
+
+	* Changes: Prepared changes for the upcoming release.
+
+2011-05-20  Hans Plum <hans@intevation.de>
+
+	* NEWS:
+	Hint to Release 2.3.1. For further information look into module
+	flys-client/NEWS
+
+2011-05-19	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java (getExplodedValues):
+	  Increment kms array size by one to take the end of range, too.
+
+2011-05-19	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTableFactory.java:
+	  Sort by rows (should not be necessary).
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  Use unsharp km lookup (epsilon = 0.0001). This fixes the problem
+	  that some kms were not found.
+
+2011-05-19  Ingo Weinzierl <ingo@intevation.de>
+
+	  flys/issue66
+
+	* src/main/resources/messages_en.properties: Fixed broken template.
+
+2011-05-19  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Set the name of the computed discharge curve objects.
+
+	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
+	  The curves of this chart will now have names that consist of the word
+	  'Discharge Curve', the river name and the kilometer that has been used
+	  for the computation.
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties: Added i18n strings for the
+	  computed discharge curves.
+
+2011-05-19	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Added convenience method isQ() to determine if we are
+	  doing Q calculations.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Reintroduced titles for the "W for unausgeglichene Abfluesse".
+
+2011-05-19  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
+	  The curves will now have names that consist of the gauge name and its
+	  valid time range.
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties: Added i18n strings for the
+	  discharge curves.
+
+2011-05-19	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Removed dead code.
+
+2011-05-19	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Use the correct method to generate kms.
+
+	* src/main/java/de/intevation/flys/artifacts/math/LinearRemap.java:
+	  Added some logging to test the map in debug mode.
+
+2011-05-18	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Made getExplodedValues static.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Use new logic to calculate "W für ungleichwertige Abfluesse".
+	  Not working, yet.
+
+	* ChangeLog: Fixed former entry.
+
+2011-05-18  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Registered the WST export for discharge
+	  longitudinal sections.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Set the
+	  names of the discharge longitudinal section computation results.
+
+	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java:
+	  The W/Q curves in the chart will now have names.
+
+	* src/main/java/de/intevation/flys/exports/WaterlevelExporter.java:
+	  The WstWriter is filled with column names in an own method. So, we are
+	  able to override this process in subclasses.
+
+	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionExporter.java:
+	  Adapted the column names for the WST export.
+
+2011-05-18	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	Work on flys/issue69
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Use new logic to calculate "Wasserstand/Wasserspiegellage".
+	  Compared to desktop FLYS are the results are structurally right 
+	  but a bit off in the positions after the decimal points.
+	  Maybe a result of the interpolation? Need to debug this.
+
+2011-05-18  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  W and Q curves will now have names based on the defined W or Q values
+	  for the waterlevel computation.
+
+2011-05-18  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/NamedObject.java:
+	  New. This object is used to give objects a name.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java: Inherit
+	  from NamedObject now. Because we need to display names for those objects
+	  in different places.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: The WQKms
+	  objects returned by a waterlevel computation will now have names.
+
+	* src/main/java/de/intevation/flys/exports/WaterlevelExporter.java:
+	  Insert the column names for the WSTs into the WstWriter.
+
+	* src/main/java/de/intevation/flys/exports/WstWriter.java: The column
+	  names are written into the head of the WSTs now.
+
+2011-05-17  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstLine.java: New. This
+	  class is used to store the W/Q values of a specific kilometer of a WST.
+
+	* src/main/java/de/intevation/flys/exports/WstWriter.java: New. A writer
+	  that creates WSTs.
+
+	  TODO: The header of the WSTs is not finished. The Q descriptions are
+	  missing.
+
+	* src/main/java/de/intevation/flys/exports/WaterlevelExporter.java:
+	  Enabled WST exports.
+
+	* doc/conf/artifacts/winfo.xml: Registered the WST export for waterlevels.
+
+2011-05-17  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/utils/Formatter.java: New. This class
+	  supports functions to retrieve formatters for specific types of data
+	  used in FLYS.
+
+	* src/main/java/de/intevation/flys/exports/WaterlevelExporter.java,
+	  src/main/java/de/intevation/flys/exports/DurationCurveExporter.java,
+	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java,
+	  src/main/java/de/intevation/flys/exports/AbstractExporter.java:
+	  Removed the formatter declaration - the whole formatter stuff is done in
+	  Formatter now.
+
+2011-05-17  Ingo Weinzierl <ingo@intevation.de>
+
+	  ISSUE-72
+
+	* src/main/java/de/intevation/flys/artifacts/services/MainValuesService.java:
+	  Repaired broken XPath expressions to extract start and end kilometer.
+
+2011-05-17	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  Removed the Hibernate loading stuff.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTableFactory.java:
+	  New. The Hibernate loading.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Use the WstValueTableFactory for loading now.
+
+2011-05-17  Ingo Weinzierl <ingo@intevation.de>
+
+	Tagged RELEASE 0.1 aka Version 2.3.0
+
+2011-05-16  Hans Plum <hans@intevation.de>
+
+	* NEWS:
+	New. Giving some user specific perspective to new functionality and
+	changes. This file references releases dates only; details can be find
+	in the client module at flys-client.
+
+2011-05-10	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	First step to calculate "W fuer ungleichwertige Abfluesse" correctly.
+	flys/issue55
+
+	* src/main/java/de/intevation/flys/artifacts/math/LinearRemap.java:
+	  New. Remaps "gleichwertige" Q values to the corresponding
+	  "ungleichwertige" Q values depending on km.
+	  
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  Remap the Q values "ungleichwertig" depending on the 
+	  "gleichwertige" ones.
+
+2011-05-10	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	First step to fix flys/issue69
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  New code path to implement the calculation of "Wasserstand/Wasspiegellage"
+	  correctly. TODO 1: Use new path in UI. TODO 2: Remove unused old code.
+
+2011-05-13  Ingo Weinzierl <ingo@intevation.de>
+
+	* Changes: Prepared Changes for the upcoming release 2.3 - see Changes
+	  file to get to know about the changes of the version numbers.
+
+2011-05-13  Ingo Weinzierl <ingo@intevation.de>
+
+	  ISSUE-37
+
+	* src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java: This
+	  state would be happy if there is a UI provider called "river_panel".
+
+2011-05-11  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/ChartGenerator.java: Added new
+	  methods that return the requested chart size as integer array [width,
+	  height]. The requested size is read from the incomding request document.
+
+	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java: The size
+	  of a chart is no longer static. The requested size is fetched using
+	  ChartGenerator.getSize().
+
+2011-05-11  Ingo Weinzierl <ingo@intevation.de>
+
+	  ISSUE-52
+
+	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  The X-Axis of such a chart is inverted, if the head of the river is not
+	  at kilometer 0. This type of charts always have the head of the river at
+	  the left side.
+
+2011-05-10	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java:
+	  Make incoming XML symmetric to DistanceInfoService.
+
+2011-05-10  Ingo Weinzierl <ingo@intevation.de>
+
+	  ISSUE-47
+
+	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionGenerator.java,
+	  src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java,
+	  src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  Adjusted temporarily the color of the W, Q and corrected W curves to
+	  distinguish each other.
+
+2011-05-10  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java:
+	  Adjusted the plot of xy charts - the gridlines are displayed now.
+
+2011-05-10  Ingo Weinzierl <ingo@intevation.de>
+
+	  ISSUE-53
+
+	* src/main/java/de/intevation/flys/artifacts/resources/Resources.java:
+	  Added a method that returns the preferred locale based on the available
+	  locales of the server and the desired locales of the request (CallMeta).
+
+	* src/main/java/de/intevation/flys/exports/AbstractExporter.java: Added a
+	  method that creates a number formatter with minimum and maximum digits.
+
+	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionExporter.java,
+	  src/main/java/de/intevation/flys/exports/WaterlevelExporter.java,
+	  src/main/java/de/intevation/flys/exports/DurationCurveExporter.java,
+	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java:
+	  Formatted the number values of the CSV exports.
+
+2011-05-10  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/RangeWithValues.java:
+	  New. A data structure that enables us to save a data triple: a range
+	  that consist of lower and upper double value and a set of values that
+	  belong to this range.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java:
+	  Implemented the validation of W/Q values.
+
+2011-05-10  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/AbstractExporter.java: New
+	  method to retrieve i18n messages based on keys.
+
+	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionExporter.java,
+	  src/main/java/de/intevation/flys/exports/WaterlevelExporter.java,
+	  src/main/java/de/intevation/flys/exports/DurationCurveExporter.java,
+	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java:
+	  Added headers for CSV exports.
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties: Added new i18n strings for
+	  CSV headers.
+
+2011-05-10	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java:
+	  Fetches river name from incoming XML document. If no river is given all 
+	  infos about all rivers are listed.
+
+	* src/main/resources/metadata/template.xml: Templates honors the 'river'
+	  parameter.
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java:
+	  Extended to pass parameters to the templating. Added support for
+	  type conversion.
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/StackFrames.java:
+	  Take parameters as an initial stack frame.
+	  
+	* src/main/java/de/intevation/flys/artifacts/services/meta/TypeConverter.java:
+	  New. Converts types off stacked variables.
+
+2011-05-10  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Added a
+	  method to add subtitles to charts. The implementation in this class does
+	  not add any subtitle. Concrete subclasses may override this method to
+	  add some.
+
+	* src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java,
+	  src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java,
+	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
+	  Add subtitles to charts.
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties: Added i18n templates for
+	  compound messages (chart subtitles).
+
+2011-05-10  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/resources/Resources.java:
+	  Added new methods to retrieve translated compound messages.
+
+2011-05-10  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/OutGenerator.java: Added a
+	  method to set the master artifact that should be used for some special
+	  operations.
+
+	* src/main/java/de/intevation/flys/exports/ChartGenerator.java,
+	  src/main/java/de/intevation/flys/exports/AbstractExporter.java:
+	  Implement the setMasterArtifact() method of the interface.
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Call OutGenerator.setMasterArtifact().
+
+	  NOTE: The determination of the master artifact needs to be implemented!
+
+2011-05-10  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Removed
+	  hard coded dev code that defined a WQ mode.
+
+2011-05-09	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java:
+	  Stripped ugly extra whitespace from output introduced by
+	  templating.
+
+2011-05-09	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/resources/metadata/template.xml: Added forgotten
+	  columns of fixation WSTs.
+
+2011-05-09  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/ChartGenerator.java: Added a
+	  method to retrieve i18n strings.
+
+	* src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java,
+	  src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java,
+	  src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java,
+	  src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
+	  Enabled i18n support for chart title and axes labels.
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties: Added i18n strings for the
+	  chart types above.
+
+2011-05-09  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/DischargeLongitudinalSectionExporter.java:
+	  New. This OutGenerator exports the data of a discharge longitudinal
+	  section computation.
+
+	* doc/conf/conf.xml: Added the DischargeLongitudinalSectionExporter.
+
+	* doc/conf/artifacts/winfo.xml: Added the exporter with CSV facet to the
+	  discharge_longitudinal_section state.
+
+2011-05-07	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/math/BackJumpCorrector.java:
+	  Added code to make back jump correction work with both
+	  potential flow directions.
+
+2011-05-06	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/resources/metadata/template.xml:
+	  Added data cage configuration for 'Längsschnitt'.
+
+2011-05-06  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Added the missing Q facet for discharge
+	  longitudinal sections.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQCKms.java: New. A
+	  derived dataset to store W/Q values with corrected Ws for a kilometer
+	  range.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java: Some new
+	  methods and a new constructor to initialize this data object with a
+	  predefined set of values.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: New
+	  methods to retrieve the W/Q values for the 'discharge longitudinal
+	  section' computation.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: New
+	  methods to retrieve and compute data used for the 'discharge
+	  longitudinal section' computation.
+
+2011-05-05  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java:
+	  Bugfix: just write the ranges of gauges into the DESCRIBE if the
+	  'wq_values' data item is required.
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties: Added i18n messages used in
+	  the DESCRIBE of the WQAdapted state.
+
+2011-05-05  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
+	  Changed the title of the y-axis (now 'W [NN+m]').
+
+2011-05-05  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Improved the transition model to reach the
+	  output state for creating 'discharge longitudinal section' charts.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added a
+	  method that returns all gauges of the selected river based on a the
+	  given kilometer range.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WQAdapted.java: New.
+	  This state creates a set of elements for the DESCRIBE that consist of a
+	  tuple of kilometer values. The number of elements depend on the number
+	  of gauges intersected by the given kilometer range.
+
+	* src/main/java/de/intevation/flys/artifacts/states/DischargeLongitudinalSection.java:
+	  New. This state is the output state that is reached after the 'discharge
+	  longitudinal section' computation has been chosen.
+
+2011-05-05  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Default
+	  step width between two kilometers added - if no step width is given,
+	  this default width is used.
+
+2011-05-05  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  Fixed a potential NullPointerException if there is just a single
+	  kilometer given to create a longitudinal section.
+
+2011-05-04	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* pom.xml: Added http://repository.jboss.org/maven2 repo
+	  to fix flys/issue30
+
+2011-05-04	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  To make diagram generation possible ws are now generated from qs
+	  because they are many ws having different qs.
+
+2011-05-04  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java:
+	  Fetch the WQ data from WINFO artifact and write those values into the
+	  CSV export.
+
+2011-05-04  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Added
+	  methods to compute and retrieve the data for discharge curves (computed).
+
+	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
+	  Fetch the computed discharge curve data from WINFOArtifact and add the
+	  values into the JFreeChart dataset.
+
+2011-05-04  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Added new transitions and states to enable
+	  the WINFO artifact for computing discharge curves.
+
+	* doc/conf/conf.xml: Added OutGenerators that generate computed discharge
+	  curves and exports for its data.
+
+	* src/main/java/de/intevation/flys/artifacts/states/ComputedDischargeCurveState.java:
+	  New. This state is reached if the user chose the computed discharge
+	  curve.
+
+	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveGenerator.java:
+	  New. This is only a stub implementation at the moment. This
+	  OutGenerator should create computed discharge curves later. It extends
+	  the DischargeCurveGenerator which should do the same stuff for discharge
+	  curves for gauges.
+
+	* src/main/java/de/intevation/flys/exports/ComputedDischargeCurveExporter.java:
+	  New. This is only a stub implementation at the moment. This OutGenerator
+	  should create the exports of the discharge curve computation.
+
+2011-05-03  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Added a new output mode for the duration
+	  curve state (CSV export).
+
+	* doc/conf/conf.xml: Added a new OutGenerator to export duration curve
+	  computations.
+
+	* src/main/java/de/intevation/flys/exports/AbstractExporter.java: New.
+	  This abstract OutGenerator represents the base class for exporting
+	  computed data. Currently, the CSV export is supported.
+
+	* src/main/java/de/intevation/flys/exports/WaterlevelExporter.java: Moved
+	  the most code to export to CSV into the AbstractExporter.
+
+	* src/main/java/de/intevation/flys/exports/DurationCurveExporter.java:
+	  New. This exporter exports the computed data of a duration computation.
+
+2011-05-03  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Modified a wrong debug statement which would confuse the user.
+
+2011-05-03  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Added a new output mode for the waterlevel
+	  state (CSV export).
+
+	* doc/conf/conf.xml: Added a new OutGenerator to export waterlevels.
+
+	* src/main/java/de/intevation/flys/exports/WaterlevelExporter.java: New.
+	  This OutGenerator exports the data of a waterlevel computation. Note:
+	  It is necessary to specify the desired facet (e.g.
+	  'waterlevel_export.csv').
+
+	* pom.xml: Added a dependency to OpenCSV.
+
+2011-05-03  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Introduced an "export" output target. If the target is "export", a
+	  facet (read from the incoming xml document) is a necessary parameter
+	  that determines which facets are written to the output.
+
+2011-05-03  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/resources/messages_en.properties: Bugfix: replaced german
+	  string (copy & paste mistake).
+
+2011-05-03  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties: Added new i18n strings for
+	  for the location selection.
+
+2011-05-03  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/DurationCurveGenerator.java:
+	  New. An OutGenerator for creating duration curves.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQDay.java: New. A
+	  model class to store necessary data for creating W and Q facets of a
+	  duration curve. This model stores W, Q and Days.
+
+	* src/main/java/de/intevation/flys/artifacts/model/MainValuesFactory.java:
+	  Added a function to retrieve tuples of (day, q) based on a given gauge -
+	  these tuples are necessary for creating duration curves.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Added
+	  methods to compute and retrieve the data necessary for creating duration
+	  curves.
+
+	* src/main/java/de/intevation/flys/artifacts/states/LocationSelect.java:
+	  Bugfix: improved the access to the location array (avoid
+	  NullPointerException).
+
+	* doc/conf/conf.xml: Registered the new OutGenerator for duration curves.
+
+2011-05-03	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* contrib/visualize-transitions.xsl: State quoting was done wrong.
+
+2011-05-02  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Enhanced the transition model to reach the
+	  final state for creating duration curves.
+
+	* src/main/java/de/intevation/flys/artifacts/states/LocationSelect.java:
+	  New. This state should be reached to just insert an array of locations.
+
+	* src/main/java/de/intevation/flys/artifacts/states/DurationCurveState.java:
+	  New. This state is reached if the duration curve calculation is
+	  selected.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Adjusted
+	  getDistance() so that it takes care on inserted locations - not just
+	  inserted ranges.
+
+2011-05-02	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/cache/CacheFactory.java:
+	  Flush/persist caches at program exists.
+
+	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  Commented out too eloquent debug output.
+
+2011-05-02  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
+	  Uses the methods of FLYSArtifact to retrieve the necessary information
+	  rivername and selected distance.
+
+2011-05-02	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  Added interpolateW method to take reference to result ws array
+	  as an argument to avoid expensive array allocations in km iterating
+	  loops.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java:
+	  Added a constructor to create backing trove datastructure
+	  with the right capacity.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Move allocation of result ws out of km loop.
+
+2011-05-02  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Added two further data items in the WQ
+	  selection state. Those items are necessary to store the information
+	  about the selected mode (range/single selection) and  the values of the
+	  single selection.
+
+	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java: If
+	  there is no value for a data item, this item is not written into the
+	  static DESCRIBE part.
+
+	* src/main/java/de/intevation/flys/artifacts/states/RangeState.java,
+	  src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java:
+	  Renamed the method to validate upper and lower values.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WQSelect.java: This
+	  state can now handle values inserted in the single selection. Therefore,
+	  new validate methods has been added.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: The
+	  methods getWs() and getWs() take care on the values inserted in the
+	  single insert mode of the client which enables the user to insert single
+	  W and Q.
+
+2011-05-02	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
+	  Repaired getQForW() by calculating indices on right dimension.
+
+2011-05-02  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: New
+	  methods for retrieving selected W values (getWs()).
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: The
+	  method for retrieving waterlevel data takes care on selected Ws, now.
+	  The selected Ws are transformed using the DischargeTables.getQForW()
+	  into Q values.
+
+2011-05-02  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
+	  Removed an unused parameter 'result' of getQForW().
+
+2011-05-02  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java: Removed
+	  the getDataset() method and replaced it with a addDataset() method.
+	  On this way, concrete subclasses of this OutGenerator can have multiple
+	  datasets (e.g. different datasets for W and Q). This abstract method is
+	  called after the chart generation is finished.
+
+	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java,
+	  src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
+	  Both classes implement the addDataset() method. The
+	  LongitudinalSectionGenerator has already multiple datasets for W and Q.
+	  Both are added to the chart - both have an own range axis.
+
+2011-05-01	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  Use the cache for the wst value table if configured.
+
+	* doc/conf/cache.xml: Choose a more precise name for the 
+	  wst value table cache.
+
+2011-04-29	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* pom.xml: Added dependency to Ehcache. Apache 2.0 license.
+
+	* doc/conf/conf.xml: Added configuration of ehcache.
+
+	* doc/conf/cache.xml: New. Cache configurations.
+
+	* src/main/java/de/intevation/flys/artifacts/cache/CacheFactory.java:
+	  New. Factory to access caches.
+
+2011-04-29	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java:
+	  Forgot to add.
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/Builder.java:
+	  New. Given a database connection and a XML template it generates
+	  an output with meta data about the database.
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/CompiledStatement.java:
+	  New. Holds prepared statements optimized to be run in the stack of
+	  contextes.
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/StackFrames.java:
+	  New. Model to hold a hierarchical scope of variables.
+
+	* src/main/java/de/intevation/flys/artifacts/services/meta/ResultData.java:
+	  New. Stores data set fetched from a sql select to be iterated in
+	  a context.
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java,
+	  src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Removed superfluous imports.
+
+2011-04-29	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* doc/conf/conf.xml: Added meta data service.
+
+	* src/main/java/de/intevation/flys/artifacts/services/MetaDataService.java:
+	  Stub for the meta data service.
+
+	* src/main/resources/metadata/template.xml: Initial template for
+	  the meta data service.
+
+2011-04-29  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Bugfix: Now, curves for Q values are drawn into a longitudinal section
+	  chart as well. Therefore, it was necessary to change the datastructure
+	  of the inner class ThemeList that stores all themes included in a chart
+	  in an ordered list (stored in a java.util.Vector now).
+
+2011-04-29  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/XYChartGenerator.java: New. An
+	  abstract base class for ChartGenerators that create XY charts.
+
+	* src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
+	  Sourced the generate() method out to the XYChartGenerator.
+
+	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  Implemented the methods to add W and Q facets to the chart.
+
+2011-04-29  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Improved
+	  the calculation of the step with for ranges.
+
+2011-04-29  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java: Added a
+	  method that returns the number of elements stored in the data pool.
+
+2011-04-29	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java:
+	  Added a get() method which takes destination array as an
+	  argument.
+
+2011-04-29  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java: Changed the
+	  data structure to store w, q and kms values from List<Double> to
+	  TDoubleArrayList which stores native double values instead of big
+	  Double values.
+
+	* pom.xml: Added the GNU Trove dependency.
+
+2011-04-29  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/OutGenerator.java: Added the
+	  name a the requested facet to doOut(). Concrete generators should just
+	  create output for this facet now.
+
+	* src/main/java/de/intevation/flys/exports/ChartGenerator.java,
+	  src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java,
+	  src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
+	  Adapted the method signature of doOut().
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Adapted the method call of OutGenerator.doOut().
+
+2011-04-29  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/themes.xml: Added mappings for the facets
+	  longitudinal.section.w and longitudinal.section.q.
+
+2011-04-29  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Added some
+	  methods to retrieve necessary information for computing the data of a
+	  waterlevel.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Added
+	  methods to compute and retrieve the data of a waterlevel computation.
+
+2011-04-29  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WQKms.java: New. This
+	  model class represents a pool of data triples that consist of W, Q and
+	  Kms information. This class might be used to compute data for creating
+	  longitudinal section curves (which are based on those W, Q and Kms
+	  values).
+
+2011-04-29  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  Bugfix: Removed endless loop and a bug while iterating over Hibernate
+	  results.
+
+2011-04-28  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/LongitudinalSectionGenerator.java:
+	  New. An OutGenerator that creates longitudinal section curves.
+
+	  NOTE: This is just the stub - the out creation needs to be implemented!
+
+	* doc/conf/conf.xml: Added the LongitudinalSectionGenerator.
+
+2011-04-28  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/conf.xml: Bugfix: Added missing <output-generators> section.
+
+2011-04-28  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WaterlevelState.java: New.
+	  This state should be reached if the 'calc.surface.curve' calculation
+	  method has been chosen.
+
+	* doc/conf/artifacts/winfo.xml: Modified a transition and added the
+	  WaterlevelState. This state is reached if the 'calc.surface.curve'
+	  calculation method has been chosen. It currently has 1 output - a
+	  longitudinal section that is not implemented yet!
+
+2011-04-28  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/transitions/ValueCompareTransition.java:
+	  New. This transition is valid if the a data object of the current
+	  artifact equals/notequals a configured value in the transition model.
+
+2011-04-28  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Bugfixes:
+	  - Adapted the parameters of the isStateReachable() call - added the
+	    artifact and the current state.
+	  - Append the outputs of a current state if the state is filled with
+	    valid data.
+
+2011-04-28  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/transitions/DefaultTransition.java:
+	  Added the missing init() method that has been introduced in the
+	  interface some commits ealier.
+
+	* src/main/java/de/intevation/flys/artifacts/transitions/TransitionFactory.java:
+	  Call init() after a Transition has been created.
+
+2011-04-28  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/AttributeWriter.java:
+	  Bugfix: Introduced a <art:outputs> node in the attribute document of a
+	  Collection that contains further <art:output> nodes - instead of having
+	  multiple <art:output> nodes at toplevel of the document.
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Adapted the XPath to retrieve the outputs in the attribute document of a
+	  Collection.
+
+2011-04-28	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* contrib/visualize-transitions.xsl: Added to create a 
+	  Graphviz digraph out of the config.xml. Usage:
+
+	  $ xsltproc --stringparam base-dir ../doc/conf/ \
+	    contrib/visualize-transitions.xsl \
+	    doc/conf/conf.xml > transitions.dot
+
+	  $ dot -Tsvg -o transitions.svg transitions.dot
+
+2011-04-28  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WQSelect.java:
+	  If no data has been inserted so far, an IllegalArgumentException is
+	  thrown.
+
+2011-04-28  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java::
+	  A lot of new methods to retrieve the theme of a facet - used while
+	  creating the output of a facet/artifact. If a facet has no theme yet, it
+	  is initialized.
+
+2011-04-27  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/AttributeParser.java,
+	  src/main/java/de/intevation/flys/collections/OutputParser.java: Removed
+	  useless imports.
+
+2011-04-27  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/ChartGenerator.java: New. An
+	  abstract OutGenerator that might be used to create chart output. Some
+	  basic things that are equal in all charts should be done here!
+
+	* src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
+	  This OutGenerator no longer implements the OutGenerator directly, but it
+	  extends the ChartGenerator now.
+
+2011-04-27  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Restructured the out() operation of a collection: Now, we collect a list
+	  of artifacts/facets and use this for the OutGenerator. Its doOut()
+	  method gets the attribute of an artifact - the position and the active
+	  state is managed by the Collection itself.
+
+2011-04-26  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/ManagedFacet.java: New.
+	  a specialized facet that stores information about its position and its
+	  state (active/inactive) in an output of a collection.
+
+	* src/main/java/de/intevation/flys/collections/AttributeParser.java: New.
+	  This parser takes the attributes (XML) of a collection and extracts the
+	  contained outputs with its facets. The result is a Map<String, Output>.
+
+	* src/main/java/de/intevation/flys/collections/OutputParser.java: New.
+	  This parser is used to query the artifact's DESCRIBE and to extract the
+	  supported outputs. The result is a Map<String, Output>.
+
+	* src/main/java/de/intevation/flys/collections/AttributeWriter.java: New.
+	  This writer merges the outputs contained in an attribute of a collection
+	  with the outputs of a collection's artifacts.
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  The attributes of a collection are written into its DESCRIBE document
+	  now. The OutputParser and AttributeParser are used to read the supported
+	  attributes by the collection and its artifacts - the AttributeWriter is
+	  used to merge both attributes and create a final attribute document.
+
+2011-04-26  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/context/FLYSContext.java,
+	  src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java:
+	  The facet-2-theme mappings are initialized at startup and stored in the
+	  FLYSContext.
+
+	* src/main/java/de/intevation/flys/themes/ThemeFactory.java: Added a
+	  function that retrieves a theme from FLYSContext based on its name.
+
+2011-04-22	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  Corrected a silly c&p mistake.
+
+2011-04-22	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/math/BackJumpCorrector.java:
+
+	  Implementation of the "Ruecksprungkorrektur" to be done in
+	  "W fuer angepassten Abflusslaengschnitt".
+
+	  All tests show the expected results. In some corner cases the
+	  algorithm described in the "Anwenderhandbuch" chapter 3.3.4.3 "Korrektur"
+	  has some definition shortcomings:
+
+	  a - What should happend when you cannot find point 2 because
+	      you cannot step back one quarter from point 3 because there
+	      is no data there any more (river too short in this direction)?
+	      The implemented algorithm raises point 3' only to an
+	      according factor. E.g. If you can step back the whole quarter
+	      distance the elevation is the full quarter. If you can
+	      step back only the half of the quarter the elevation is
+	      only an eighth.
+
+	  b - If the water heights between point 2 and 3 are constant then
+	      the algorithm will produce a spline interpolation that
+	      lowers those values. Is this intended?
+
+	  For real data the back jumps are expected to be more in the middle
+	  of the distance ranges so the corner cases are maybe not so
+	  important.
+
+	* src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java:
+	  Removed superfluous import.
+
+2011-04-21  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/themes/ThemeFactory.java: Removed debug
+	  code that has been commited by accident.
+
+2011-04-21  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/themes.xml: New. A first small theme configuration.
+
+	* doc/conf/conf.xml: Added a link to the theme configuration.
+
+	* src/main/java/de/intevation/flys/artifacts/context/FLYSContext.java:
+	  Defined a key that is used to store a themes map in the FLYSContext.
+
+	* src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java:
+	  The theme configuration is read at startup and the themes are stores in
+	  the FLYSContext.
+
+2011-04-21  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/themes/Theme.java,
+	  src/main/java/de/intevation/flys/themes/DefaultTheme.java:
+	  New. The interface and its default implementation that represents themes
+	  used to style charts and maps.
+
+	* src/main/java/de/intevation/flys/themes/ThemeField.java,
+	  src/main/java/de/intevation/flys/themes/DefaultThemeField.java:
+	  New. The interface and its default implementation that represents fields
+	  in themes. A theme might be "Lines" and one of its field might be
+	  "Color" or "Size".
+
+	* src/main/java/de/intevation/flys/themes/ThemeFactory.java: A factory
+	  that creates new themes based on a theme configuration.
+
+2011-04-20	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  Implementation of "Abflusskurve/Abflusstafel" calculation.
+
+	  Added method interpolateWQ() which takes an km and results in a
+	  tuple of two double arrays containing the w/q values interpolated
+	  between the surrounding w/q values of the table.
+	  w values are interpolated linear, q values with a cubic spline.
+
+	  Drawing w over q gives you the discharge table at the given km.
+
+	  !!! This code needs testing !!!
+
+2011-04-20	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* pom.xml: Added dependency to Apache Commons Math 2.2 (Apache License 2.0)
+
+2011-04-20	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
+	  Fix problem when sorting by q (copied w instead of q).
+
+2011-04-20  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
+	  Fixed broken HQL statement.
+
+2011-04-19	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  add a method interpolateW() which takes an array of
+	  q values and returns an equal sized array of w values.
+	  This is essentially the "Wasserstand/Wasserspiegellagen" calculation
+	  of desktop FLYS.
+
+	  If you want to do a calculation with given w values you have
+	  to convert the w values with DischargeTables.getQForW() first.
+
+	  !!! This code needs heavy testing !!!
+
+2011-04-19	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
+	  We need a getQForW() method and not getWForQ() because when
+	  doing a "Wasserstand/Wasserspiegellagen" calculation with given
+	  w values these values need to be translated to q values with
+	  the master discharge table.
+
+2011-04-19	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
+	  Sorting of q values was done wrong.
+
+2011-04-19  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/AnnotationsFactory.java:
+	  Ordered the list of annotations returned by this factory based on its
+	  range.
+
+2011-04-19  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/MainValuesService.java:
+	  New. This service returns an XML document that includes the main values
+	  of a gauge based on a river name, a start and an end point.
+
+	* doc/conf/conf.xml: Registered the MainValuesService.
+
+2011-04-19  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/MainValuesFactory.java:
+	  A factory that provides methods to return MainValues.
+
+2011-04-19	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
+	  Added static method getWForQ() to interpolate a w value for
+	  a given q value based on a given discharge table.
+	
+2011-04-19	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
+	  Added convenience constructors/methods to ease the access to the master
+	  discharge table of a gauge.
+
+2011-04-18	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  Moved the query complexity into view 'wst_value_table' and
+	  used this instead.
+
+2011-04-18	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstValueTable.java:
+	  Fetches w/q value tables from the backend. TODO: Move this
+	  to the backend and use a view.
+
+2011-04-18  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Changed
+	  the error key that is thrown if no input data was found so that the key
+	  is usable for GWT's i18n mechanism.
+
+2011-04-18  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java:
+	  The inserted river is validated now (overrides validate() of
+	  DefaultState).
+
+2011-04-18  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java:
+	  The inserted calculation method is validated now (overrides validate()
+	  of DefaultState).
+
+2011-04-18  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  The input data of feed() are validated using the DefaultStates
+	  validate() method.
+
+	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
+	  New method validate() that needs to be overidden by concrete subclasses.
+	  It should return true, if the data of the State is fine, otherwise it
+	  should raise an exception.
+
+	  NOTE: The exceptions are not translated in the server but in the client!
+
+	* src/main/java/de/intevation/flys/artifacts/states/RangeState.java: New.
+	  This abstract class exists to provide some methods for handling ranges.
+	  Currently, there is a method that validates a given range based on
+	  min/max values.
+
+	* src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WQSelect.java:
+	  Implemented input data validation for ranges.
+
+	  NOTE: The input validation of concrete values has not been implemented
+	  yet!
+
+2011-04-18  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Removed debug code that has been commited by accident :-/
+
+2011-04-18  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: The
+	  getGauge() method returns the first gauge based on the given start and
+	  end point of the river.
+
+	* src/main/java/de/intevation/flys/artifacts/states/WQSelect.java:
+	  Fixed potential bugs: if no gauge could be determined, the default
+	  values for W and Q are the minimum and maximum double values.
+
+2011-04-15  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/WQSelect.java: Fills
+	  the DESCRIBE with default values for W and Q.
+
+2011-04-15  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/WstFactory.java:
+	  New. Returns Wst object - based on a river.
+
+2011-04-15  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Now
+	  provides some methods that return some basic objects inserted while
+	  parameterization: River, Gauge and so on.
+
+2011-04-15  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java,
+	  src/main/java/de/intevation/flys/artifacts/services/RiverService.java:
+	  Bugfix: Repaired broken imports of the SessionHolder.
+
+2011-04-15  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/SessionHolder.java:
+	  Moved this class to flys-backend.
+
+	* src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java,
+	  src/main/java/de/intevation/flys/artifacts/model/GaugesFactory.java,
+	  src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java,
+	  src/main/java/de/intevation/flys/artifacts/model/AnnotationsFactory.java,
+	  src/main/java/de/intevation/flys/artifacts/context/SessionCallContextListener.java:
+	  Adapted imports of the SessionHolder.
+
+2011-04-14	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* trunk/src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java,
+	  trunk/src/main/java/de/intevation/flys/artifacts/services/RiverService.java:
+	  Acquire/release sessions in services to avoid db connection leaks.
+
+2011-04-14  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
+	  Changed some method signatures - added a reference to the owner
+	  Artifact.
+
+	* src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/WQSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java:
+	  Modified method signatures based on the changes in DefaultState.
+
+	* src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java:
+	  Added default values to the dynamic part of DESCRIBE.
+
+2011-04-14  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java:
+	  Added a function that returns a River object based on a given river
+	  name.
+
+2011-04-14	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java,
+	  src/main/java/de/intevation/flys/artifacts/model/GaugesFactory.java,
+	  src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java,
+	  src/main/java/de/intevation/flys/artifacts/model/AnnotationsFactory.java:
+	  Static methods are using the SessionHolder, too.
+
+2011-04-14  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/context/SessionCallContextListener.java:
+	  Added the setup() method that has been added to the interface
+	  description in the last commits.
+
+	* doc/conf/conf.xml: Registered the SessionCallContextListener as
+	  CallContext.Listener.
+
+2011-04-14  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/SessionHolder.java:
+	  Bugfix: Call correct method to retrieve an instance of
+	  SessionFactoryProvider.
+
+2011-04-14	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/SessionHolder.java:
+	  New. Contains thread local session holder for hibernate sessions.
+
+	* src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java:
+	  Uses session from SessionHolder.
+
+	* src/main/java/de/intevation/flys/artifacts/context/SessionCallContextListener.java:
+	  Interacts with SessionHolder now.
+	
+	* src/main/java/de/intevation/flys/exports/ChartExportHelper.java:
+	  Removed superfluous import.
+	
+2011-04-14  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/context/SessionCallContextListener.java:
+	  Implementation of a CallContext.Listener to open/close Hibernate
+	  Sessions for each request.
+
+2011-04-14  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
+	  Some modifications related to the last commit - modification of the
+	  describe() signature of a State.
+
+2011-04-14  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/GaugeSelect.java:
+	  Removed. We do not need a state to select a gauge - the selection takes
+	  place by choosing a start and an end point.
+
+2011-04-13  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java:
+	  Bugfix: added missing label node to root node and a namespace to the
+	  data node.
+
+2011-04-12  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  The name of the artifact 'winfo' is written into the DESCRIBE document
+	  now. We need this to have a proper way to distinguish between different
+	  artifacts in the UI.
+
+2011-04-12  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Bugfix:
+	  States are filled with data before they describe themself.
+
+2011-04-11  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/AnnotationsFactory.java:
+	  New. A factory that returns the annotations of a specific river.
+
+	* src/main/java/de/intevation/flys/artifacts/services/DistanceInfoService.java:
+	  New. This service provides a document that contains information about
+	  distances of a river.
+
+	* doc/conf/conf.xml: Registered the DistanceInfoService.
+
+2011-04-06  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  This collection overrides the out() operation now. The incoming request
+	  document is read and the related OutGenerator is used to create the
+	  output.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Removed
+	  the code to create discharge curves. It has moved to the
+	  DischargeCurveGenerator which now does this work.
+
+2011-04-06  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/OutGenerator.java: The
+	  generate() method throws an IOException now.
+
+	* src/main/java/de/intevation/flys/exports/DischargeCurveGenerator.java:
+	  New. This OutGenerator creates discharge curves.
+
+2011-04-06  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: Changed
+	  the visibility of the getData() method. It's now public, because the
+	  OutGenerator needs an artifact's data.
+
+2011-04-03	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/**/*.java: Removed trailing whitespace.
+
+2011-04-03	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Make project compilable again by
+	  commenting out a not existing XMLDebug reference.
+
+2011-03-31  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java:
+	  Added code to parse the configured OutGenerators and to save them (in a
+	  map) in the FLYSContext.
+
+	* src/main/java/de/intevation/flys/artifacts/context/FLYSContext.java:
+	  Added a key that is used to save the OutGenerators Map in the context.
+
+2011-03-31  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/OutGenerator.java:
+	  New. This interface is used to generator different types of output.
+	  ArtifactCollections will make use of this interface to create a
+	  collected output of all its artifacts.
+
+2011-03-30  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Removed the Backend from FLYSArtifactCollection - used ArtifactDatabase
+	  operations instead.
+
+	* TODO: Removed 'remove Backend reference' TODO.
+
+2011-03-30  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Enhanced the configuration of the
+	  discharge curve output mode. This output now provides three facets - W,
+	  Q and the curve itself.
+
+2011-03-30  Ingo Weinzierl <ingo@intevation.de>
+
+	Tagged RELEASE 0.1
+
+2011-03-30  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Renamed an output mode in the WINFO
+	  artifact configuration.
+
+2011-03-29  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_de.properties: Changed a german string.
+
+2011-03-29  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java:
+	  Modified the available calculation modes and its order in the DESCRIBE
+	  document.
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_de_DE.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties: Adapted the names of
+	  calculation modes.
+
+2011-03-28  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Added the hash code of an artifact to the artifact part of the
+	  collection's DESCRIBE document.
+
+2011-03-28  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Changed
+	  the background color of discharge curves to white.
+
+2011-03-28	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
+	  Cache the scale, too. Otherwise two calls to getValues() with
+	  different arguments will result in the same output.
+
+2011-03-28  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
+	  Introduced a 'scale' parameter in the getValues() method.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Filled
+	  the out() operation with code that draws a discharge table of one or
+	  more gauges specified by the given range in entered in a previous state.
+
+2011-03-28  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/exports/ChartExportHelper.java:
+	  New. A helper class to exports charts.
+
+	* pom.xml: Added dependencies to iText, Batik and JFreeChart.
+
+2011-03-28	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/importer/PegelGltParser.java:
+	  Fixed swap of operands.
+
+2011-03-28	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/GaugesFactory.java:
+	  New. Load gauges for a river and filter them for given
+	  ranges.
+
+2011-03-25	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
+	  Store data in a double [][] instead of interleaved double []
+	  to be compatible with org.jfree.data.xy.DefaultXYDataset.
+
+2011-03-25  Ingo Weinzierl <ingo@intevation.de>
+
+	* TODO: Removed 'i18n' and 'step-back' TODOs and added an issue to remove
+	  the Backend reference from FLYSArtifactCollection.
+
+2011-03-25  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  Added missing artifact namespace of an attribute in the DESCRIBE
+	  document.
+
+2011-03-24  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/collections/FLYSArtifactCollection.java:
+	  New. This ArtifactCollection overrides the DefaultArtifactCollection to
+	  implement FLYS specific describe() and out() operations.
+
+	* doc/conf/conf.xml: Use the FLYSArtifactCollection instead of the
+	  DefaultArtifactCollection for this application.
+
+2011-03-24	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/DischargeTables.java:
+	  New. Fetches values of discharge tables in form of packed
+	  w/q double arrays for given gauges.
+
+	* src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java:
+	  Removed needless import.
+
+2011-03-24  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/resources/messages_de_DE.properties: Added a german resource
+	  bundle to avoid exceptions in the flys artifacts. Sometimes, the
+	  Resources class is not able to find a 'de_DE' bundle and throws an
+	  exception. This is really strange, because it should use the 'de' bundle
+	  in that case, but it doesn't.
+
+2011-03-23  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Added
+	  some code to append the output modes of previous states to the DESCRIBE
+	  document.
+
+	  TODO: Determine if the current state is already filled with data and
+	  append its output modes as well!
+
+2011-03-22  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Enhanced the location_distance state with
+	  an output mode 'discharge_table'.
+
+2011-03-21  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
+	  Write human readable strings as label attribute into the DESCRIBE
+	  output. Those labels are used to be displayed in the GUI.
+
+2011-03-21  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java:
+	  Added some further calculation types.
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties: Added i18n strings for the
+	  calculation types
+
+2011-03-21  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Implemented the step-back part of the advance() operation.
+
+2011-03-21  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/resources/messages_de.properties: Fixed a german umlaut.
+
+2011-03-18  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Added new states for entering a
+	  location/distance and w/q.
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties: New string for the
+	  location/distance and w/q input states.
+
+2011-03-18  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/WQSelect.java:
+	  New. A state for the W/Q input of the WINFO parameterization.
+
+2011-03-18  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
+	  Append an attribute 'uiprovider' to the dynamic UI node.
+
+	* src/main/java/de/intevation/flys/artifacts/states/LocationDistanceSelect.java:
+	  New. A state for the location/distance selection of the WINFO
+	  parameterization.
+
+2011-03-17  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
+	  Added a new method getUIProvider() that might be overriden by concreted
+	  subclasses that should be rendered with a specific UIProvider.
+
+2011-03-17  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  The static UI part is created by the previous states now. This makes it
+	  possible to group the data objects (which is necessary to group the
+	  objects in the ui).
+
+	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
+	  Added a describeStatic() method that creates a node that contains the
+	  data of that state.
+
+2011-03-17  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/RiverService.java:
+	  Removed TODO: the document contains the rivers provided by the backend
+	  now.
+
+2011-03-17	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* pom.xml: Added dependency to flys backend.
+
+	* src/main/java/de/intevation/flys/artifacts/model/River.java:
+	  Removed. We are using the backend model now.
+
+	* src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java:
+	  Fetches the rivers from the backend.
+
+	* src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java:
+	  Import fixes.
+
+2011-03-15	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* doc/conf/conf.xml: Added section for database backend configuration.
+
+2011-03-15	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java:
+	  Fixed build error coming from different import of XMLUtils.
+
+2011-03-14  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
+	  Appended the missing label node that contains the human readable name of
+	  the data item.
+
+2011-03-14  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java,
+	  src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
+	  I18N of strings for the DESCRIBE document.
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties: I18N strings for the
+	  calculcation mode state.
+
+2011-03-14  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Modified the winfo states.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Adapted
+	  the artifact regarding the changes of the last commit. The states
+	  describe() method creates the dynamic UI node - the artifact needs to
+	  apply this node.
+
+	* src/main/java/de/intevation/flys/artifacts/states/CalculationSelect.java:
+	  New. The state for choosing the calculation mode.
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties: Added i18n strings for the
+	  calculation mode state.
+
+2011-03-14  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/DefaultState.java:
+	  New. This is the base state for the FLYS application. It provides a
+	  method that creates the dynamic ui node for the DESCRIBE.
+
+	* src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/GaugeSelect.java: Both
+	  classes extend the abstract base class DefaultState.
+
+2011-03-14  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/resources/Resources.java:
+	  New. This class retrieves the i18n strings from a ResourceBundle.
+
+	* src/main/resources/messages.properties,
+	  src/main/resources/messages_en.properties,
+	  src/main/resources/messages_de.properties: Resource files for german and
+	  english translation.
+
+2011-03-10  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Appended
+	  the data that have been inserted in former states into the static node
+	  of the DESCRIBE.
+
+2011-03-10  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: The
+	  operations feed() and advance() return the description of the artifact
+	  using the describe() operation. This avoids additional server round trips
+	  in the client - the clients gets to know about the new state of the
+	  artifact immediately.
+
+2011-03-10  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Implemented a part (step forward) of the advance operation.
+
+	* TODO: Implement Step-Back in advance operation.
+
+2011-03-09  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java:
+	  Implemented the abstract method getName(). It returns the constant
+	  'winfo' string.
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java:
+	  Implemented the feed action. The data of an incoming feed() operation is
+	  stored in StateData objects that are saved in a map in the artifact.
+
+	  NOTE: There is no input validation and no i18n of error messages (see
+	  TODO).
+
+2011-03-09  Ingo Weinzierl <ingo@intevation.de>
+
+	* TODO: This file contains some open points that need to be done.
+
+2011-03-09  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/FLYSArtifact.java: New. This
+	  artifact serves as the default artifact for the FLYS application.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: This
+	  artifact now inherits from FLYSArtifact. Furthermore, there is one big
+	  change: we don't store the State objects itself in the artifact, but
+	  just the identifier of those. This makes the artifact smaller and more
+	  compatible agains previous versions of the software.
+
+2011-03-08  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/services/RiverService.java:
+	  New. This service will retrieve a list of provided rivers.
+
+	* doc/conf/conf.xml: Added a configuration for the RiverService.
+
+2011-03-07  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/conf.xml: Added a section user-factory and collection-factory in
+	  the factories part of the configuration.
+
+2011-03-01  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java:
+	  Replaced the 'special' attribute from DESCRIBE with a 'uiprovider'
+	  attribute.
+
+2011-02-08  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: The
+	  RiverSelect state is called to create the UI part of the describe
+	  document.
+
+	* src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java:
+	  Implemented the dynamic UI part of describe(). The static part is not
+	  inserted into the describe document at the moment. We need a reference to
+	  the previous states for this.
+
+2011-02-08  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/model/RiverFactory.java,
+	  src/main/java/de/intevation/flys/artifacts/model/River.java: New. A model
+	  class that represents a river and its factory to create concrete river
+	  instances.
+	  NOTE: Currently, this is just a mockup. The factory just returns two
+	  static rivers "Mosel" and "Saar" without a connection to a backend.
+
+2011-02-07  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/StateFactory.java: The
+	  input data of a state is initialized with empty StateData objects after
+	  the State has been created.
+
+	* doc/conf/artifacts/winfo.xml: Renamed the input data nodes of the states
+	  which now fits better to the class name of the implementation.
+
+2011-02-07  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: The
+	  describe document returned by this artifact now contains the current state
+	  and the reachable states.
+
+2011-02-07  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java:
+	  The transitions are put into the TransitionEngine with the ID of the state
+	  - not longer with the artifact name. On this way, we are able to fetch
+	  just the transitions for a specific state, instead of all the transitions
+	  of an artifact.
+
+2011-02-04  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Describe()
+	  returns the artifact's uuid and hash value. The whole implementation of
+	  describe() is still outstanding.
+
+2011-02-04  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/artifacts/winfo.xml: Removed useless config stuff.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: Removed
+	  useless methods, and improved the init process - the first state is set as
+	  the current state for this artifact.
+
+	* src/main/java/de/intevation/flys/artifacts/states/RiverSelect.java,
+	  src/main/java/de/intevation/flys/artifacts/states/GaugeSelect.java: New.
+	  The states are used in the first two steps of the WINFOArtifact.
+	  Currently, they just implement stubs of the necessary methods setup() and
+	  describe().
+
+2011-02-04  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/State.java,
+	  src/main/java/de/intevation/flys/artifacts/transitions/TransitionEngine.java,
+	  src/main/java/de/intevation/flys/artifacts/transitions/Transition.java:
+	  Removed. These classes are placed in the artifact-database now.
+
+	* src/main/java/de/intevation/flys/artifacts/transitions/DefaultTransition.java,
+	  src/main/java/de/intevation/flys/artifacts/transitions/TransitionFactory.java:
+	  Adapted imports of Transition.
+
+	* src/main/java/de/intevation/flys/artifacts/states/StateFactory.java: New.
+	  This factory should be used to create concrete State objects.
+
+	* src/main/java/de/intevation/flys/artifacts/context/FLYSContext.java: Added
+	  a constant key to store the StateEngine in the context.
+
+	* src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java:
+	  New method that initializes the states at application start.
+
+2011-02-03  Ingo Weinzierl <ingo@intevation.de>
+
+	* src/main/java/de/intevation/flys/artifacts/states/State.java: New. The
+	  interface description of a state.
+
+	* src/main/java/de/intevation/flys/artifacts/transitions/Transition.java,
+	  src/main/java/de/intevation/flys/artifacts/transitions/DefaultTransition.java:
+	  New. The interface description and a default implementation of a
+	  transition.
+
+	* src/main/java/de/intevation/flys/artifacts/transitions/TransitionEngine.java:
+	  New. The TransitionEngine stores all transitions for each artifact and
+	  should be used to determine, if an artifact can advance from one state to
+	  another.
+
+	* src/main/java/de/intevation/flys/artifacts/transitions/TransitionFactory.java:
+	  New. Transitions should be created by using this class.
+
+	* src/main/java/de/intevation/flys/artifacts/context/FLYSContext.java: New.
+	  The Flys context. It currently defines keys to store important components
+	  in the context.
+
+	* src/main/java/de/intevation/flys/artifacts/context/FLYSContextFactory.java:
+	  New. The context factory initializes the basic components of the
+	  application. Currently, the TransitionEngine is created and all artifacts
+	  with its transitions are read from the global configuration and stored in
+	  the FLYSContext.
+
+	* pom.xml: Added a dependency to the 'artifacts-common' package.
+
+	* doc/conf/artifacts/winfo.xml: Corrected the classname of the
+	  DefaultTransition.
+
+	* doc/conf/conf.xml: Added FLYSContextFactory as context-factory.
+
+2011-02-02  Ingo Weinzierl <ingo@intevation.de>
+
+	* doc/conf/conf.xml: An initial configuration file for the FLYS artifact
+	  server.
+
+	* doc/conf/artifacts/winfo.xml: An initial transition configuration of an
+	  WINFO artifact.
+
+	* src/main/java/de/intevation/flys/artifacts/WINFOArtifact.java: A stub of
+	  an artifact for a WINFO parameterization.
+
+	* pom.xml: Set the source code version to 1.5.
+
+2011-02-01	Sascha L. Teichmann	<sascha.teichmann@intevation.de>
+
+	* src/**, pom.xml: Added initial maven project.
+	* ChangeLog: new.