Tue, 18 Jun 2013 13:14:51 +0200 |
Raimund Renkert |
Set initial facet activity for sediment load fractions.
|
Tue, 18 Jun 2013 10:59:58 +0200 |
Raimund Renkert |
New images and hover areas for Saale and Saale-Thüringen.
|
Tue, 18 Jun 2013 09:26:00 +0200 |
Raimund Renkert |
Skip calculation parameters if no bed diameter data exist in CSV exporter.
|
Tue, 18 Jun 2013 09:09:42 +0200 |
Raimund Renkert |
Order bed quality data by km.
|
Tue, 18 Jun 2013 09:09:08 +0200 |
Raimund Renkert |
Fixed bed quality data facet index to get the correct diameter.
|
Mon, 17 Jun 2013 21:51:04 +0200 |
Sascha L. Teichmann |
Artifacts: Scan the official lines associated with a main value if it applies for the current river.
|
Mon, 17 Jun 2013 21:49:31 +0200 |
Sascha L. Teichmann |
Backend: Added one to many getter to fetch the official lines associated with a namend main value.
|
Mon, 17 Jun 2013 17:39:42 +0200 |
Raimund Renkert |
Removed umlaut stripping for image map and renamed 'Saale Thüringen'.
|
Mon, 17 Jun 2013 17:16:25 +0200 |
Tom Gottfried |
flow velocity model parser: accept braces in names of upper discharge
double-precision
|
Mon, 17 Jun 2013 16:18:40 +0200 |
Raimund Renkert |
Insert Double.NaN for missing values in bed height factory.
|
Mon, 17 Jun 2013 15:37:26 +0200 |
Raimund Renkert |
Use Double.NaN for missing values in middle bedheight calculation and write empty strings in csv export.
|
Mon, 17 Jun 2013 14:30:00 +0200 |
Raimund Renkert |
Fixed SQ relation total bedload: Use the correct input data for calculation.
|
Mon, 17 Jun 2013 13:18:00 +0200 |
Christian Lins |
Fix the "Saale-Thüringen" hover effect in the interactive JS map.
|
Mon, 17 Jun 2013 12:05:49 +0200 |
Christian Lins |
Renaming "Thüringen" -> "Thueringen" to fix interactive JS map (#1322).
|
Fri, 14 Jun 2013 18:25:12 +0200 |
Sascha L. Teichmann |
Backend: Store official lines from config if they are any.
|
Fri, 14 Jun 2013 18:15:49 +0200 |
Sascha L. Teichmann |
Backend: Only use name of official config line as name of main value.
|
Fri, 14 Jun 2013 18:12:22 +0200 |
Sascha L. Teichmann |
Backend: Joined official lines with there importer model.
|
Fri, 14 Jun 2013 17:56:52 +0200 |
Sascha L. Teichmann |
Backend: Added importer model for official lines.
|
Fri, 14 Jun 2013 17:11:33 +0200 |
Felix Wolfsteller |
issue1235: Values are valid until next measurements station range start.
|
Fri, 14 Jun 2013 17:09:25 +0200 |
Felix Wolfsteller |
SedimentLoadFacet, issue1235: Ignore values not measured at measurement stations
|
Fri, 14 Jun 2013 17:08:31 +0200 |
Felix Wolfsteller |
Comment.
|
Fri, 14 Jun 2013 11:56:18 +0200 |
Felix Wolfsteller |
In prep for 1235: Renamed variables for improved readability.
|
Fri, 14 Jun 2013 16:56:30 +0200 |
Sascha L. Teichmann |
Backend: Added special ImportWstColumns for official lines. They have to be glued with the main values.
|
Fri, 14 Jun 2013 16:46:33 +0200 |
Tom Gottfried |
merge changes from default into double-precision
double-precision
|
Fri, 14 Jun 2013 16:11:49 +0200 |
Sascha L. Teichmann |
Backend: Create ImportWsts for official lines expicitly. They are going to be somewhat special. Removed some cruft from the WstParser.
|
Fri, 14 Jun 2013 13:25:23 +0200 |
Sascha L. Teichmann |
Backend: Added factory to ImportWst to create columns which are derived from ImportWstColumns. This will be handy when creating columns for the official lines.
|
Fri, 14 Jun 2013 13:01:26 +0200 |
Sascha L. Teichmann |
Backend: First steps to integrate parsing of official config files.
|
Fri, 14 Jun 2013 12:32:28 +0200 |
Sascha L. Teichmann |
Backend: Extended list of recognized main value names in STA/official line classification
|
Fri, 14 Jun 2013 12:30:38 +0200 |
Sascha L. Teichmann |
Backend: Removed cruft code
|
Thu, 13 Jun 2013 17:24:56 +0200 |
Andre Heinecke |
Remove createBarriersLayer and createBarriers
|
Thu, 13 Jun 2013 17:23:51 +0200 |
Andre Heinecke |
Use group layer instead of adding two layers to barriers facet
|
Thu, 13 Jun 2013 17:17:45 +0200 |
Andre Heinecke |
Group barriers layer and fix polygon layer path to shapefile
|
Thu, 13 Jun 2013 17:17:06 +0200 |
Andre Heinecke |
Give the polygon barriers class a nice name
|
Thu, 13 Jun 2013 17:15:34 +0200 |
Sascha L. Teichmann |
Backend: Moved guessing of main values and there time intervals out of the STA parser. Same come will be useful to extend the WST parser to better handle official lines.
|
Thu, 13 Jun 2013 13:12:48 +0200 |
Sascha L. Teichmann |
Backend: removed scale factor from min/max value determination of gauge Ws.
|
Thu, 13 Jun 2013 12:48:12 +0200 |
Sascha L. Teichmann |
Artifacts: Moved code from WINFO artifact into state where it belongs.
|
Thu, 13 Jun 2013 11:43:02 +0200 |
Andre Heinecke |
Add special case handling for Fixing AT export at a gauge
|
Thu, 13 Jun 2013 10:01:01 +0200 |
Andre Heinecke |
Add location handling in waterlevels-fix macro
|
Thu, 13 Jun 2013 09:43:50 +0200 |
Andre Heinecke |
Fix dc:fromValue and dc:toValue for locations
|
Thu, 13 Jun 2013 09:22:46 +0200 |
Andre Heinecke |
Add SQ Relation KM formatter and use it fopr issue 1071
|
Thu, 13 Jun 2013 09:09:56 +0200 |
Felix Wolfsteller |
Doc.
|
Thu, 13 Jun 2013 07:12:35 +0200 |
Felix Wolfsteller |
issue1335: Set a single (0) QRange for Waterlevel diffs from csv.
|
Wed, 12 Jun 2013 12:36:43 +0200 |
Felix Wolfsteller |
issue1354: TimeIntervals in Waterlevels from csv files.
|
Wed, 12 Jun 2013 18:21:48 +0200 |
Sascha L. Teichmann |
Artifacts: Comment out broken official lines loading from datacage.
|
Wed, 12 Jun 2013 18:09:18 +0200 |
Andre Heinecke |
Add gauge validity information to dischargecurve exporter
|
Wed, 12 Jun 2013 18:13:47 +0200 |
Sascha L. Teichmann |
GWT client: Removed obsolete imports.
|
Wed, 12 Jun 2013 18:10:36 +0200 |
Sascha L. Teichmann |
Artifacts: Removed obsolete import.
|
Wed, 12 Jun 2013 18:08:31 +0200 |
Sascha L. Teichmann |
Backend: Removed obsolete import.
|
Wed, 12 Jun 2013 18:01:42 +0200 |
Sascha L. Teichmann |
Backend: Add Hibernate model for official lines.
|
Wed, 12 Jun 2013 17:46:56 +0200 |
Andre Heinecke |
Assume that the result is calculated if the wUnit is meter
|
Wed, 12 Jun 2013 17:46:22 +0200 |
Andre Heinecke |
Format km's in computed discharge export
|
Wed, 12 Jun 2013 17:45:56 +0200 |
Andre Heinecke |
Don't print two header at calculated gauges
|
Wed, 12 Jun 2013 17:45:35 +0200 |
Andre Heinecke |
Correctly set the reference system after conversion
|
Wed, 12 Jun 2013 16:59:46 +0200 |
Andre Heinecke |
Use the river unit in csv export if not converted
|
Wed, 12 Jun 2013 16:57:55 +0200 |
Andre Heinecke |
Only show gauge information if available
|
Wed, 12 Jun 2013 16:20:09 +0200 |
Andre Heinecke |
Remove some accidental debug output
|
Wed, 12 Jun 2013 16:10:56 +0200 |
Andre Heinecke |
Update PDF/CSV export for discharge curves
|
Wed, 12 Jun 2013 16:07:28 +0200 |
Andre Heinecke |
Rework ATWriter/Exporter
|
Wed, 12 Jun 2013 16:02:33 +0200 |
Andre Heinecke |
Add another constructor that takes a WQ object as parameter
|
Wed, 12 Jun 2013 16:01:46 +0200 |
Andre Heinecke |
Add conversion function that prepares a WQ table for export at gauge
|
Wed, 12 Jun 2013 10:54:27 +0200 |
Andre Heinecke |
Remove discharge table scaling but add reference system to W
|
Wed, 12 Jun 2013 16:36:34 +0200 |
Sascha L. Teichmann |
Backend: Modified schema for a better model of official lines.
|
Wed, 12 Jun 2013 14:28:37 +0200 |
Christian Lins |
Add missing hover image for "Saar (Wiltinger Bogen)" (#1322).
|
Wed, 12 Jun 2013 14:25:58 +0200 |
Tom Gottfried |
Bedheight single parser: do not reject lines with missing values
double-precision
|
Wed, 12 Jun 2013 12:00:17 +0200 |
Felix Wolfsteller |
Weird merge.
|
Wed, 12 Jun 2013 11:51:25 +0200 |
Felix Wolfsteller |
Minor refac.
|
Wed, 12 Jun 2013 11:43:34 +0200 |
Felix Wolfsteller |
Remove code dupe, doc.
|
Wed, 12 Jun 2013 11:27:36 +0200 |
Felix Wolfsteller |
Doc.
|
Wed, 12 Jun 2013 11:20:36 +0200 |
Felix Wolfsteller |
Waterl.Diff.Parser issue1354: Extract years from name, to later set timeintervals.
|
Wed, 12 Jun 2013 11:18:47 +0200 |
Felix Wolfsteller |
Doc.
|
Wed, 12 Jun 2013 11:52:19 +0200 |
Felix Wolfsteller |
WaterlevelDifferencesParser: issue1354/1, set timeintervals from waterdiff-csvs.
|
Wed, 12 Jun 2013 11:51:25 +0200 |
Felix Wolfsteller |
Minor refac.
|
Wed, 12 Jun 2013 11:43:34 +0200 |
Felix Wolfsteller |
Remove code dupe, doc.
|
Wed, 12 Jun 2013 11:27:36 +0200 |
Felix Wolfsteller |
Doc.
|
Wed, 12 Jun 2013 11:20:36 +0200 |
Felix Wolfsteller |
Waterl.Diff.Parser issue1354: Extract years from name, to later set timeintervals.
|
Wed, 12 Jun 2013 11:18:47 +0200 |
Felix Wolfsteller |
Doc.
|
Wed, 12 Jun 2013 10:43:30 +0200 |
Sascha L. Teichmann |
Whitespace correction and cminor ruft code removal.
|
Wed, 12 Jun 2013 10:34:43 +0200 |
Andre Heinecke |
Add date format for artifact creation time
|
Wed, 12 Jun 2013 10:28:36 +0200 |
Felix Wolfsteller |
Switch wst_kinds of Waterleve/-Differences (6/7).
|
Wed, 12 Jun 2013 10:26:45 +0200 |
Felix Wolfsteller |
Switch wst-kind of waterlevel/-differences (7 and 6).
|
Wed, 12 Jun 2013 09:43:02 +0200 |
Felix Wolfsteller |
Cosemetics, doc.
|
Wed, 12 Jun 2013 09:39:51 +0200 |
Felix Wolfsteller |
Doc.
|
Wed, 12 Jun 2013 10:13:55 +0200 |
Andre Heinecke |
Add km range to description of waterlevels for issue565
|
Tue, 11 Jun 2013 17:19:59 +0200 |
Andre Heinecke |
Revert halfhearted logfile move. (r6127)
|
Tue, 11 Jun 2013 16:41:16 +0200 |
Andre Heinecke |
Add non recommendations for bed_difference_height_year
|
Tue, 11 Jun 2013 15:26:47 +0200 |
Christian Lins |
Add missing 'Saale-Thüringen' and 'Saar (Wiltinger Bogen)' hover images links. The latter is not available yet.
|
Tue, 11 Jun 2013 14:58:13 +0200 |
Raimund Renkert |
Order bed heights by station.
|
Tue, 11 Jun 2013 13:17:18 +0200 |
Tom Gottfried |
merged changes from default into double-precision branch
double-precision
|
Tue, 11 Jun 2013 13:03:50 +0200 |
Tom Gottfried |
Bed height parser: check for duplicate stations
double-precision
|
Tue, 11 Jun 2013 12:57:51 +0200 |
Raimund Renkert |
Replaced the 'old school' wiki link buttons with default links.
|
Tue, 11 Jun 2013 12:41:33 +0200 |
Felix Wolfsteller |
WQAdaptedInputPanel: Ensure correct initial default selection ("Q").
|
Tue, 11 Jun 2013 12:19:01 +0200 |
Felix Wolfsteller |
issue1267: Polishing: Move the sorting into the db/sql-query.
|
Tue, 11 Jun 2013 12:05:01 +0200 |
Felix Wolfsteller |
Doc.
|
Tue, 11 Jun 2013 12:01:27 +0200 |
Felix Wolfsteller |
issue1267: Do not downscale height.
|
Tue, 11 Jun 2013 12:00:57 +0200 |
Felix Wolfsteller |
Added TODO about braindead code.
|
Tue, 11 Jun 2013 11:59:25 +0200 |
Felix Wolfsteller |
issue1267: Sort the list of FastCrossSections before binarySearching it.
|
Tue, 11 Jun 2013 11:58:54 +0200 |
Felix Wolfsteller |
Doc.
|
Tue, 11 Jun 2013 09:40:56 +0200 |
Tom Gottfried |
merge changes from default into double-precision branch
double-precision
|
Tue, 11 Jun 2013 09:21:04 +0200 |
Raimund Renkert |
Added styles for bed quality themes to config.
|
Tue, 11 Jun 2013 09:20:14 +0200 |
Raimund Renkert |
Set facet activity, have the correct facet order and added new facet to bed quality.
|
Tue, 11 Jun 2013 09:18:30 +0200 |
Raimund Renkert |
Added new bedload diameter facet to config.
|
Tue, 11 Jun 2013 09:17:29 +0200 |
Raimund Renkert |
New facet for bedload diameter measurements.
|
Tue, 11 Jun 2013 09:16:41 +0200 |
Raimund Renkert |
Removed obsolete member and minor code style.
|
Tue, 11 Jun 2013 09:14:12 +0200 |
Raimund Renkert |
Never return 'null' for bed(load) diameters.
|
Tue, 11 Jun 2013 09:12:35 +0200 |
Raimund Renkert |
Bring bedload average diameter to 'mm'.
|
Tue, 11 Jun 2013 08:44:38 +0200 |
Tom Gottfried |
Corrected typo
|
Mon, 10 Jun 2013 21:26:22 +0200 |
Tom Gottfried |
AT-Parser: Do not change unit of W and Q in discharge tables
|
Mon, 10 Jun 2013 16:30:41 +0200 |
Raimund Renkert |
I18N strings for facet descriptions.
|
Mon, 10 Jun 2013 16:30:01 +0200 |
Raimund Renkert |
New theme for bed diameter measurement facets.
|
Mon, 10 Jun 2013 16:28:57 +0200 |
Raimund Renkert |
Generate facets for bed diameter measurements and draw them into the generated chart.
|
Mon, 10 Jun 2013 16:23:39 +0200 |
Raimund Renkert |
Added new facet types for bed diameter measurements.
|
Mon, 10 Jun 2013 16:22:23 +0200 |
Raimund Renkert |
Added container and facet for bed diameter measurements.
|
Mon, 10 Jun 2013 16:24:45 +0200 |
Andre Heinecke |
Added tag 3.0.7 for changeset 5733d7f27196
|
Mon, 10 Jun 2013 15:45:12 +0200 |
Sascha L. Teichmann |
Removed obsolete import.
3.0.7
|
Mon, 10 Jun 2013 14:56:13 +0200 |
Andre Heinecke |
Enlarge white background so that it overlays correctly as
|
Mon, 10 Jun 2013 14:17:09 +0200 |
Christian Lins |
Refit PDF map legend (#767).
|
Mon, 10 Jun 2013 14:02:32 +0200 |
Christian Lins |
Limit PDF map title length to 20 characters (#767).
|
Mon, 10 Jun 2013 13:43:53 +0200 |
Christian Lins |
Enhance WSPLGEN legend's class names (#767).
|
Mon, 10 Jun 2013 13:06:30 +0200 |
Andre Heinecke |
Add Jasper report templates for bedheight differences
|
Mon, 10 Jun 2013 13:06:03 +0200 |
Andre Heinecke |
Implement pdf export for bedheight differences
|
Mon, 10 Jun 2013 13:04:48 +0200 |
Andre Heinecke |
Add method to get name pairs of differences
|
Mon, 10 Jun 2013 13:04:17 +0200 |
Andre Heinecke |
Add JR datasource for Bedheight differences
|
Mon, 10 Jun 2013 11:50:21 +0200 |
Andre Heinecke |
Change author I'm the culprit of that class.
|
Mon, 10 Jun 2013 10:57:14 +0200 |
Andre Heinecke |
Fix accidental mistake in group expression of some waterlevels
|
Mon, 10 Jun 2013 10:54:24 +0200 |
Andre Heinecke |
Fix uesk description for issue 770
|
Fri, 07 Jun 2013 18:08:45 +0200 |
Tom Gottfried |
Bedheight parser: improved logging
|
Fri, 07 Jun 2013 17:52:10 +0200 |
Tom Gottfried |
Bedheight parser: handle whitespace in metaline
|
Fri, 07 Jun 2013 17:09:26 +0200 |
Andre Heinecke |
Fix export at river km's for issue1275
|