| Fri, 13 May 2011 11:26:29 +0000 |
Ingo Weinzierl |
Prepared Changes for the upcoming release 2.3.
|
| Fri, 13 May 2011 08:00:58 +0000 |
Ingo Weinzierl |
ISSUE-37 The river state wants to be rendered using a river_panel UI provider.
|
| Thu, 12 May 2011 09:11:16 +0000 |
Ingo Weinzierl |
Charts are generated using the size defined in the incoming request document.
|
| Wed, 11 May 2011 16:31:38 +0000 |
Ingo Weinzierl |
ISSUE-52 The longitudinal section charts will now always have the head of the river at the left side.
|
| Wed, 11 May 2011 09:51:54 +0000 |
Sascha L. Teichmann |
MetaDataService: Make incoming XML symmetric to DistanceInfoService.
|
| Tue, 10 May 2011 17:57:56 +0000 |
Ingo Weinzierl |
ISSUE-47 Adjusted the line color of W, Q and corrected W curves (temporarilly).
|
| Tue, 10 May 2011 17:12:15 +0000 |
Ingo Weinzierl |
Display gridlines in charts.
|
| Tue, 10 May 2011 16:10:01 +0000 |
Ingo Weinzierl |
ISSUE-53 Formatted number values of CSV exports.
|
| Tue, 10 May 2011 15:28:30 +0000 |
Ingo Weinzierl |
Implemented the input validation of WQ in the adapted WQ panel.
|
| Tue, 10 May 2011 13:18:03 +0000 |
Ingo Weinzierl |
The CSV exports will now have headers.
|
| Tue, 10 May 2011 12:43:12 +0000 |
Sascha L. Teichmann |
Datacage: Added river parameter to meta data services.
|
| Tue, 10 May 2011 12:19:17 +0000 |
Ingo Weinzierl |
Added subtitles to the available charts.
|
| Tue, 10 May 2011 11:40:15 +0000 |
Ingo Weinzierl |
Added a method to Resources that returns translated compound messages.
|
| Tue, 10 May 2011 10:26:26 +0000 |
Ingo Weinzierl |
Improved the OutGenerator interface to set a master artifact for the out generation.
|
| Tue, 10 May 2011 07:40:06 +0000 |
Ingo Weinzierl |
Enabled the WINFO artifact to choose between W and Q mode in the adapted wq panel of the discharge longitudinal section computation.
|
| Mon, 09 May 2011 19:54:24 +0000 |
Sascha L. Teichmann |
Datacage service: Cleanup served XML document.
|
| Mon, 09 May 2011 13:47:15 +0000 |
Sascha L. Teichmann |
Datacage: Added forgotten columns of fixation WST to datcage template.
|
| Mon, 09 May 2011 12:53:49 +0000 |
Ingo Weinzierl |
Enabled i18n support for charts.
|
| Mon, 09 May 2011 09:55:47 +0000 |
Ingo Weinzierl |
Added a CSV exporter for the discharge longitudinal section computation.
|
| Sat, 07 May 2011 21:34:02 +0000 |
Sascha L. Teichmann |
Back jump correction should work now for both flow directions.
|
| Fri, 06 May 2011 16:49:31 +0000 |
Sascha L. Teichmann |
Added data cage configuration for 'Längsschnitt'.
|
| Fri, 06 May 2011 16:15:18 +0000 |
Sascha L. Teichmann |
Add data cage configuration for "Abflusskurve [NN + m]".
|
| Fri, 06 May 2011 14:20:26 +0000 |
Ingo Weinzierl |
Added an OutGenerator to create discharge longitudinal section charts.
|
| Fri, 06 May 2011 14:19:27 +0000 |
Ingo Weinzierl |
Implemented methods to retrieve and compute the data used to create discharge longitudinal sections.
|
| Thu, 05 May 2011 12:34:53 +0000 |
Ingo Weinzierl |
Small bugfix in the adapted WQ state and further i18n strings.
|
| Thu, 05 May 2011 12:31:28 +0000 |
Ingo Weinzierl |
Changed the y-axis title of the computed discharge curve.
|
| Thu, 05 May 2011 06:12:44 +0000 |
Ingo Weinzierl |
Improved the transition model and added states to enable the 'discharge longitudinal section' computation - NOTE: the work in this computation has not finished yet.
|
| Thu, 05 May 2011 05:27:41 +0000 |
Ingo Weinzierl |
Use a default step width (100m) between two kilometers if no width is given.
|
| Thu, 05 May 2011 04:52:47 +0000 |
Ingo Weinzierl |
Fixed a potential NullPointerException while creating a longitudinal section chart.
|
| Wed, 04 May 2011 17:01:22 +0000 |
Sascha L. Teichmann |
fix flys/issue30
|
| Wed, 04 May 2011 13:51:25 +0000 |
Sascha L. Teichmann |
'berechnete Abflusskurve': generate ws from qs
|
| Wed, 04 May 2011 10:10:11 +0000 |
Ingo Weinzierl |
Filled the discharge curve exporter (CSV) with code - now, it generates a CSV export with the computed discharge curve data.
|
| Wed, 04 May 2011 08:24:50 +0000 |
Ingo Weinzierl |
Enabled the WINFO artifact to compute the data for discharge curves (computed) - ComputedDischargeCurveGenerator uses those values now to create the chart.
|
| Wed, 04 May 2011 07:48:39 +0000 |
Ingo Weinzierl |
Improved the transition model and added classes to enable the WINFO artifact to create computed discharge curves - NOTE: each of the new classes is just a stub.
|
| Tue, 03 May 2011 17:37:56 +0000 |
Ingo Weinzierl |
Added an exporter to export the computed data of a duration curve.
|
| Tue, 03 May 2011 17:34:29 +0000 |
Ingo Weinzierl |
Modified a confusing debug statement.
|
| Tue, 03 May 2011 16:36:21 +0000 |
Ingo Weinzierl |
Added an exporter (OutGenerator) for waterlevels which currently supports CSV exports.
|
| Tue, 03 May 2011 16:26:35 +0000 |
Ingo Weinzierl |
Introduced an export output target on collection level that enables collections to be exported.
|
| Tue, 03 May 2011 13:23:00 +0000 |
Ingo Weinzierl |
I18N Bugfix.
|
| Tue, 03 May 2011 13:15:56 +0000 |
Ingo Weinzierl |
Added i18n strings for the location selection.
|
| Tue, 03 May 2011 12:05:32 +0000 |
Ingo Weinzierl |
Enabled the WINFO artifact to create duration curves - new OutGenerator, added methods for data computation.
|
| Tue, 03 May 2011 09:23:17 +0000 |
Sascha L. Teichmann |
visualize-transitions.xsl: State quoting was done wrong.
|
| Mon, 02 May 2011 16:58:04 +0000 |
Ingo Weinzierl |
Enhanced the transition model to reach a state that creates duration curves.
|
| Mon, 02 May 2011 16:50:58 +0000 |
Sascha L. Teichmann |
Flush/persist cache at end of program.
|
| Mon, 02 May 2011 16:44:02 +0000 |
Ingo Weinzierl |
The DischargeCurveGenerator uses public methods of FLYSArtifact to retrieve all necessary information of the current settings.
|
| Mon, 02 May 2011 16:28:57 +0000 |
Sascha L. Teichmann |
Moved expensive allocation of result arrays out of km loop.
|
| Mon, 02 May 2011 15:17:04 +0000 |
Ingo Weinzierl |
Enabled the FLYSArtifact to handle an array of inserted WQ values (without given ranges).
|
| Mon, 02 May 2011 13:42:02 +0000 |
Sascha L. Teichmann |
Repaired DischargeTables.getQForW()
|
| Mon, 02 May 2011 12:47:10 +0000 |
Ingo Weinzierl |
Enabled the server to handle longitudinal section chart requests with inserted W data - Ws are transformed into Qs then.
|
| Mon, 02 May 2011 12:41:24 +0000 |
Ingo Weinzierl |
Removed an unused parameter from DischargeTables.getQForW().
|
| Mon, 02 May 2011 09:41:22 +0000 |
Ingo Weinzierl |
Ws and Qs of a longitudinal section chart are mapped to an own range axis now.
|
| Sun, 01 May 2011 10:58:38 +0000 |
Sascha L. Teichmann |
Added caching support for the wst value tables.
|
| Fri, 29 Apr 2011 16:56:37 +0000 |
Sascha L. Teichmann |
Added ehcache support.
|
| Fri, 29 Apr 2011 15:10:44 +0000 |
Sascha L. Teichmann |
Added meta data service.
|
| Fri, 29 Apr 2011 14:39:42 +0000 |
Sascha L. Teichmann |
Added meta service stub. TODO: Add meta data builder.
|
| Fri, 29 Apr 2011 13:06:49 +0000 |
Ingo Weinzierl |
Bugfix: Changed the datastructure of the ThemeList (inner class of FLYSArtifactCollection) to store the theme of a chart in an ordered list -> Q curves of longitudinal section charts are now drawn.
|
| Fri, 29 Apr 2011 10:13:24 +0000 |
Ingo Weinzierl |
Implemented the chart creation of a longitudinal section chart - W and Q facets.
|
| Fri, 29 Apr 2011 10:02:59 +0000 |
Ingo Weinzierl |
Improved the calculation of the step width of ranges.
|
| Fri, 29 Apr 2011 10:01:41 +0000 |
Ingo Weinzierl |
New method WQKms.size() to retrieve the number of elements in the data pool.
|
| Fri, 29 Apr 2011 08:39:17 +0000 |
Sascha L. Teichmann |
WQKms model: Added a get() method which takes destination array as an argument.
|
| Fri, 29 Apr 2011 08:28:44 +0000 |
Ingo Weinzierl |
Introduced GNU Trove to store WQKms values in a more performant data structure.
|
| Fri, 29 Apr 2011 08:13:56 +0000 |
Ingo Weinzierl |
Added the name of the facet to the parameterlist of OutGenerator.doOut().
|
| Fri, 29 Apr 2011 08:02:54 +0000 |
Ingo Weinzierl |
Added themes and mappings for the W and Q theme of a longitudinal section curve.
|
| Fri, 29 Apr 2011 07:46:27 +0000 |
Ingo Weinzierl |
Added necessary methods to start the computation of waterlevel data.
|
| Fri, 29 Apr 2011 07:27:05 +0000 |
Ingo Weinzierl |
Introduced a model class to store a set of triple data objects that consist of W, Q and Kms information.
|
| Fri, 29 Apr 2011 07:22:25 +0000 |
Ingo Weinzierl |
Bugfix: Removed endless loop and a bug while iterating over Hibernate results.
|
| Thu, 28 Apr 2011 12:54:11 +0000 |
Ingo Weinzierl |
Added an OutGenerator for creating longitudinal section curves.
|
| Thu, 28 Apr 2011 12:23:40 +0000 |
Ingo Weinzierl |
Bugfix: Added missing <output-generators> section to the global configuration.
|
| Thu, 28 Apr 2011 11:32:41 +0000 |
Ingo Weinzierl |
Added a further state that is reached if the waterlevel calculation mode has been chosen.
|
| Thu, 28 Apr 2011 11:22:45 +0000 |
Ingo Weinzierl |
Added a new Transition to compare values.
|
| Thu, 28 Apr 2011 11:20:11 +0000 |
Ingo Weinzierl |
Bugfixes: Adapted a broken method call of TransitionEngine.isStateReachable() and added the outputs of a current state to the DESCRIBE.
|
| Thu, 28 Apr 2011 11:16:21 +0000 |
Ingo Weinzierl |
Bugfix: Added the missing init() method to a Transition and call it in the TransitionFactory after a Transition has been created.
|
| Thu, 28 Apr 2011 11:13:06 +0000 |
Ingo Weinzierl |
Bugfix: The outputs of a Collection's attribute document are stored in an outputs node now instead of being stored toplevel in the document.
|
| Thu, 28 Apr 2011 11:08:34 +0000 |
Ingo Weinzierl |
Throw an illegal argument exception in LocationDistanceSelect.validate() and WQSelect.validate() if no data has been inserted so far.
|
| Thu, 28 Apr 2011 09:09:44 +0000 |
Sascha L. Teichmann |
Added XSL transformation do create Graphviz digraph out of conf.xml
|
| Thu, 28 Apr 2011 08:14:20 +0000 |
Ingo Weinzierl |
The OutGenerator gets the theme of a facet while output creation.
|
| Wed, 27 Apr 2011 14:42:52 +0000 |
Ingo Weinzierl |
Removed useless imports.
|
| Wed, 27 Apr 2011 14:40:44 +0000 |
Ingo Weinzierl |
Added an abstract OutGenerator that should be the base class for all generators which create charts.
|
| Wed, 27 Apr 2011 14:35:44 +0000 |
Ingo Weinzierl |
Improved the out() operation of a Collection - the OutGenerator gets to know about the facets and its theme.
|
| Tue, 26 Apr 2011 13:29:18 +0000 |
Ingo Weinzierl |
The Attributes of a collection are written into its DESCRIBE now.
|
| Tue, 26 Apr 2011 13:17:08 +0000 |
Ingo Weinzierl |
Initialized the facet2theme mappings configured in themes.xml and added a function to the ThemeFactory that retrieves a theme from FLYSContext based on its name.
|
| Fri, 22 Apr 2011 15:49:35 +0000 |
Sascha L. Teichmann |
Corrected a silly c&p mistake.
|
| Fri, 22 Apr 2011 09:57:27 +0000 |
Sascha L. Teichmann |
Implementation of the "Ruecksprungkorrektur" to be done in "W fuer angepassten Abflusslaengschnitt".
|
| Thu, 21 Apr 2011 08:49:58 +0000 |
Ingo Weinzierl |
Removed debug code that has been commited by accident.
|
| Thu, 21 Apr 2011 08:47:39 +0000 |
Ingo Weinzierl |
Added a first small theme configuration and code to read it.
|
| Thu, 21 Apr 2011 08:44:41 +0000 |
Ingo Weinzierl |
Implementation of interfaces and its default implementations and a factory to work with themes.
|
| Wed, 20 Apr 2011 14:26:51 +0000 |
Sascha L. Teichmann |
Implementation of "Abflusskurve/Abflusstafel" calculation.
|
| Wed, 20 Apr 2011 13:13:19 +0000 |
Sascha L. Teichmann |
Added dependency to Apache Commons Math 2.2 (Apache License 2.0)
|
| Wed, 20 Apr 2011 09:46:40 +0000 |
Sascha L. Teichmann |
Discharge table: Fix problem when sorting by q (copied w instead of q).
|
| Wed, 20 Apr 2011 08:00:38 +0000 |
Ingo Weinzierl |
Fixed broken HQL statement.
|
| Tue, 19 Apr 2011 17:43:39 +0000 |
Sascha L. Teichmann |
Implemented the "Wasserstand/Wasserspiegellagen" calculation.
|
| Tue, 19 Apr 2011 17:37:21 +0000 |
Sascha L. Teichmann |
Discharge table: we need a getQForW() and not a getWForQ().
|
| Tue, 19 Apr 2011 14:48:28 +0000 |
Sascha L. Teichmann |
Discharge tables: Sorting of q values was done wrong.
|
| Tue, 19 Apr 2011 13:10:27 +0000 |
Ingo Weinzierl |
The list of annotations returned by the AnnotationFactory is ordered by its range.
|
| Tue, 19 Apr 2011 12:33:39 +0000 |
Ingo Weinzierl |
Added a service that returns the MainValues of a Gauge based on a river name and a stationing.
|
| Tue, 19 Apr 2011 12:31:07 +0000 |
Ingo Weinzierl |
Added a factory that returns MainValues.
|
| Tue, 19 Apr 2011 11:05:27 +0000 |
Sascha L. Teichmann |
Discharge table: Added static method getWForQ() to interpolate a w value for a given q value based on a given discharge table.
|
| Tue, 19 Apr 2011 10:32:31 +0000 |
Sascha L. Teichmann |
Discharge tables: Added convenience constructors/methods to ease the access to the master discharge table of a gauge.
|
| Mon, 18 Apr 2011 16:01:23 +0000 |
Sascha L. Teichmann |
Moved the query complexity of creating a w/q value table into view
|
| Mon, 18 Apr 2011 14:40:35 +0000 |
Sascha L. Teichmann |
Fetches w/q value tables from the backend.
|
| Mon, 18 Apr 2011 13:23:12 +0000 |
Ingo Weinzierl |
Changed the error key that is written to the result document of the feed operation.
|
| Mon, 18 Apr 2011 13:21:52 +0000 |
Ingo Weinzierl |
The inserted river is validated in the feed operation().
|
| Mon, 18 Apr 2011 13:00:57 +0000 |
Ingo Weinzierl |
The calculation method is validated in the feed() operation.
|
| Mon, 18 Apr 2011 12:36:08 +0000 |
Ingo Weinzierl |
The inserted ranges (distance and WQ ranges) are validated in the feed() operation.
|
| Mon, 18 Apr 2011 09:34:18 +0000 |
Ingo Weinzierl |
Removed testing code that has been comitted by accident in the last revision.
|
| Mon, 18 Apr 2011 07:39:17 +0000 |
Ingo Weinzierl |
The getGauge() method of the FLYSArtifact returns the first gauge based on the given stationing now.
|
| Fri, 15 Apr 2011 13:47:10 +0000 |
Ingo Weinzierl |
The WQ state fills the DESCRIBE with default values for W and Q.
|
| Fri, 15 Apr 2011 13:46:22 +0000 |
Ingo Weinzierl |
Added a WstFactory to return Wst objects.
|
| Fri, 15 Apr 2011 13:37:51 +0000 |
Ingo Weinzierl |
FLYSArtifact provides methods to retrieve the real River, Gauge objects.
|
| Fri, 15 Apr 2011 10:10:37 +0000 |
Ingo Weinzierl |
Bugfix: repaired broken imports of the session holder.
|
| Fri, 15 Apr 2011 09:52:37 +0000 |
Ingo Weinzierl |
Removed the SessionHolder and adapted imports.
|
| Thu, 14 Apr 2011 13:45:50 +0000 |
Sascha L. Teichmann |
Acquire/release sessions in services to avoid db connection leaks.
|
| Thu, 14 Apr 2011 13:36:06 +0000 |
Ingo Weinzierl |
The location/distance state now writes default values into DESCRIBE.
|
| Thu, 14 Apr 2011 13:26:29 +0000 |
Ingo Weinzierl |
Added a new function to RiverFactory that retrieves a River object based on a given river name.
|
| Thu, 14 Apr 2011 13:15:16 +0000 |
Sascha L. Teichmann |
Backend access: Static methods are using the SessionHolder, too.
|
| Thu, 14 Apr 2011 13:11:12 +0000 |
Ingo Weinzierl |
Finalized the SessionCallContextListener and registered it as CallContext.Listener in the configuration.
|
| Thu, 14 Apr 2011 12:59:21 +0000 |
Ingo Weinzierl |
Bugfix: Call correct method to retrieve and initialize an instance of SessionFactoryProvider.
|
| Thu, 14 Apr 2011 12:08:47 +0000 |
Sascha L. Teichmann |
Added a session holder to hold hibernate sessions.
|
| Thu, 14 Apr 2011 11:18:28 +0000 |
Ingo Weinzierl |
Added an Implementation of CallContext.Listener to open/close Hibernate Sessions for each request.
|
| Thu, 14 Apr 2011 08:32:18 +0000 |
Ingo Weinzierl |
Modified the states' describe() method - related to the last commit.
|
| Thu, 14 Apr 2011 08:23:15 +0000 |
Ingo Weinzierl |
Removed the state to explicitly select a gauge.
|
| Wed, 13 Apr 2011 08:31:20 +0000 |
Ingo Weinzierl |
Bugfix: Repaired the dynamic UI part of the RiverSelect state in DESCRIBE.
|
| Tue, 12 Apr 2011 13:42:14 +0000 |
Ingo Weinzierl |
Write the name of an artifact into the DESCRIBE document.
|
| Tue, 12 Apr 2011 07:49:36 +0000 |
Ingo Weinzierl |
Bugfix: States are filled with data before they describe themself.
|
| Mon, 11 Apr 2011 12:54:03 +0000 |
Ingo Weinzierl |
Implemented a service that retrieves distance information for a specific river.
|
| Wed, 06 Apr 2011 10:01:49 +0000 |
Ingo Weinzierl |
The FLYSArtifactCollection overrides out() and uses OutGenerators to create output for this operation.
|
| Wed, 06 Apr 2011 09:56:38 +0000 |
Ingo Weinzierl |
Added a DischargeCurveGenerator that creates discharge curves.
|
| Wed, 06 Apr 2011 09:53:14 +0000 |
Ingo Weinzierl |
Changed the visibility of getData() method of FLYSArtifacts.
|
| Sun, 03 Apr 2011 10:55:16 +0000 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
| Sun, 03 Apr 2011 10:53:14 +0000 |
Sascha L. Teichmann |
Make project compilable again.
|
| Thu, 31 Mar 2011 10:56:08 +0000 |
Ingo Weinzierl |
Added code to parse the configured OutGenerators in the global configuration and to save a map of such in the FLYSContext.
|
| Thu, 31 Mar 2011 10:54:07 +0000 |
Ingo Weinzierl |
Added an OutGenerator interface that might be used to generator collected outputs of a set of artifacts.
|
| Wed, 30 Mar 2011 16:00:51 +0000 |
Ingo Weinzierl |
Removed the Backend reference from FLYSArtifactCollection.
|
| Wed, 30 Mar 2011 15:21:12 +0000 |
Ingo Weinzierl |
Enhanced the output mode for discharge curves with three facets.
|
| Wed, 30 Mar 2011 13:47:02 +0000 |
Ingo Weinzierl |
Tagged RELEASE 0.1 of FLYS Artifacts.
|
| Tue, 17 May 2011 07:51:26 +0000 |
Ingo Weinzierl |
Tagged RELEASE 2.3 of flys-client.
|
| Mon, 16 May 2011 10:36:48 +0000 |
Hans Plum |
Added missing information for release
|
| Mon, 16 May 2011 10:27:47 +0000 |
Hans Plum |
Added NEWS File for collecting enduser-sepcific information for releases
|
| Fri, 13 May 2011 11:24:55 +0000 |
Ingo Weinzierl |
Prepared Changes for the upcoming release 2.3.
|
| Fri, 13 May 2011 09:06:13 +0000 |
Sascha L. Teichmann |
Datacage: Better converter for incoming XML tree
|
| Thu, 12 May 2011 16:47:23 +0000 |
Raimund Renkert |
ISSUE 61: Changed datacage button style.
|
| Thu, 12 May 2011 15:42:37 +0000 |
Raimund Renkert |
ISSUE 46: Removed the table header context menu.
|
| Thu, 12 May 2011 15:14:09 +0000 |
Raimund Renkert |
ISSUE 43: Changed i18n strings.
|
| Thu, 12 May 2011 14:59:18 +0000 |
Raimund Renkert |
Show rivers as links instead of a combobox.
|
| Thu, 12 May 2011 09:59:29 +0000 |
Ingo Weinzierl |
ISSUE-15 The charts in the chart panel are requested with the size of the parent panel.
|
| Thu, 12 May 2011 09:14:46 +0000 |
Ingo Weinzierl |
Enabled the client to request charts in different sizes.
|
| Thu, 12 May 2011 07:08:27 +0000 |
Ingo Weinzierl |
ISSUE-34 Limit the windows which are moved to the right lower corner to 10.
|
| Wed, 11 May 2011 16:38:54 +0000 |
Sascha L. Teichmann |
Datacage: transport rpc result to ui.
|
| Wed, 11 May 2011 15:33:54 +0000 |
Ingo Weinzierl |
Changed the height of the export panel.
|
| Wed, 11 May 2011 14:34:15 +0000 |
Sascha L. Teichmann |
UI stub for data cage
|
| Wed, 11 May 2011 14:29:35 +0000 |
Ingo Weinzierl |
ISSUE-56 Display download buttons to export the computed data.
|
| Wed, 11 May 2011 14:23:08 +0000 |
Ingo Weinzierl |
Added a service to export data from the artifact server.
|
| Wed, 11 May 2011 11:44:23 +0000 |
Raimund Renkert |
ISSUE 34: Move every new project window 20 px down and right.
|
| Wed, 11 May 2011 11:07:18 +0000 |
Raimund Renkert |
ISSUE 44: Moved the location/range and WQ input tables to the helper panel and
|
| Wed, 11 May 2011 10:04:49 +0000 |
Raimund Renkert |
Set the computation result panel width and height to 100%.
|
| Wed, 11 May 2011 09:11:40 +0000 |
Ingo Weinzierl |
Parse the facets of a Collection and distinguish between an ordinary OutputMode and an ExportMode (new).
|
| Wed, 11 May 2011 07:32:08 +0000 |
Ingo Weinzierl |
ISSUE-41 Moved the panel that shows the computation results right beside the parameterization - NOTE: issue is still open.
|
| Wed, 11 May 2011 07:06:22 +0000 |
Ingo Weinzierl |
ISSUE-57 Replaced wrong i18n function call.
|
| Tue, 10 May 2011 16:49:15 +0000 |
Ingo Weinzierl |
ISSUE-48 Added placeholder for the toolbar and the theme control in the chart output tab.
|
| Tue, 10 May 2011 16:25:00 +0000 |
Ingo Weinzierl |
ISSUE-38 Set the first value of a select box as default value.
|
| Tue, 10 May 2011 16:13:16 +0000 |
Ingo Weinzierl |
Added i18n error messages used in the adapted wq panel.
|
| Tue, 10 May 2011 15:44:43 +0000 |
Raimund Renkert |
Changed the empty table message for the WQ input table.
|
| Tue, 10 May 2011 15:36:07 +0000 |
Raimund Renkert |
Changed the empty table message for helper and data tables.
|
| Tue, 10 May 2011 13:44:57 +0000 |
Sascha L. Teichmann |
Added stub for meta data service.
|
| Tue, 10 May 2011 11:37:49 +0000 |
Raimund Renkert |
Fixed the location input. A range selection sets the correct location values
|
| Tue, 10 May 2011 10:57:57 +0000 |
Raimund Renkert |
Remove the data table on step back.
|
| Tue, 10 May 2011 10:03:00 +0000 |
Raimund Renkert |
Build a dynamic table for the CSV data.
|
| Tue, 10 May 2011 06:48:46 +0000 |
Ingo Weinzierl |
Fixed attributes/namespaces in the XML document that is used to fetch the CSV export of WINFO computations.
|
| Mon, 09 May 2011 16:22:11 +0000 |
Ingo Weinzierl |
Fixed a broken dependency in the maven pom file.
|
| Mon, 09 May 2011 14:29:53 +0000 |
Raimund Renkert |
Added table and service for calculation output to UI.
|
| Mon, 09 May 2011 13:51:39 +0000 |
Ingo Weinzierl |
Added radio buttons to choose between W/Q modes in the adapted WQ panel.
|
| Mon, 09 May 2011 11:21:50 +0000 |
Ingo Weinzierl |
Bugfix: the current locale string is used to fetch chart images now.
|
| Mon, 09 May 2011 10:31:54 +0000 |
Ingo Weinzierl |
Added a doubleclick listener to the project list to open a project.
|
| Mon, 09 May 2011 10:23:20 +0000 |
Sascha L. Teichmann |
Removed superfluous imports.
|
| Mon, 09 May 2011 10:20:45 +0000 |
Ingo Weinzierl |
Changed the wording when speaking about kilometer ranges.
|
| Thu, 05 May 2011 15:42:38 +0000 |
Raimund Renkert |
Enable or disable table rows depending on the WQ selection.
|
| Thu, 05 May 2011 13:32:36 +0000 |
Raimund Renkert |
Implemented handler for WQ value selection.
|
| Thu, 05 May 2011 09:51:51 +0000 |
Raimund Renkert |
Added table for WQ inputs.
|
| Thu, 05 May 2011 09:33:15 +0000 |
Ingo Weinzierl |
Implemented the createOld() of WQAdaptedInputPanel.
|
| Thu, 05 May 2011 08:09:03 +0000 |
Ingo Weinzierl |
The WQAdaptedInputPanel displays input fields for each gauge and returns the correct w/q values now.
|
| Wed, 04 May 2011 14:54:38 +0000 |
Raimund Renkert |
Added new WQ info service and data structures.
|
| Wed, 04 May 2011 14:40:50 +0000 |
Raimund Renkert |
Do not update the locations table if no data is cached.
|
| Wed, 04 May 2011 14:05:40 +0000 |
Ingo Weinzierl |
Added a stub implementation of a WQ panel for discharge longitudinal section computations.
|
| Wed, 04 May 2011 13:02:00 +0000 |
Raimund Renkert |
Fixed the single location input panel.
|
| Wed, 04 May 2011 08:41:55 +0000 |
Ingo Weinzierl |
Renamed non-computed discharge curve outputs.
|
| Wed, 04 May 2011 07:36:20 +0000 |
Ingo Weinzierl |
Added i18n strings for the computed discharge curve.
|
| Tue, 03 May 2011 16:22:27 +0000 |
Ingo Weinzierl |
Added new i18n strings for new output modes.
|
| Tue, 03 May 2011 13:52:14 +0000 |
Raimund Renkert |
Added new UI provider for single location selection.
|
| Mon, 02 May 2011 16:41:35 +0000 |
Raimund Renkert |
Cash the table data and rebuild the location table on distance selection.
|
| Mon, 02 May 2011 14:54:11 +0000 |
Ingo Weinzierl |
Introduced two further parameters in the WQ panel to determine the selection mode (range/single, w/q).
|
| Mon, 02 May 2011 14:47:12 +0000 |
Raimund Renkert |
Added location and distance tables.
|
| Mon, 02 May 2011 10:18:56 +0000 |
Ingo Weinzierl |
Bugfix: the WQ panel now returns the correct step width value if the range mode is selected.
|
| Fri, 29 Apr 2011 10:12:02 +0000 |
Raimund Renkert |
Prepared UI elements for the location and distance input tables.
|
| Thu, 28 Apr 2011 12:50:42 +0000 |
Ingo Weinzierl |
Added i18n strings for a longitudinal section curve.
|
| Thu, 28 Apr 2011 09:56:06 +0000 |
Raimund Renkert |
Added class diagrams for the client ui.
|
| Mon, 18 Apr 2011 13:27:49 +0000 |
Ingo Weinzierl |
Added error messages that are displayed during the feed operation.
|
| Thu, 14 Apr 2011 07:53:01 +0000 |
Ingo Weinzierl |
Each service is now called with the name of the current locale to set the request object's locale manually in the HttpClient.
|
| Tue, 12 Apr 2011 13:48:11 +0000 |
Ingo Weinzierl |
The title of a the ParameterList tab depends on the Artifact's name if we create a new project window with an existing Artifact.
|
| Tue, 12 Apr 2011 13:46:33 +0000 |
Ingo Weinzierl |
We can now distinuish between different artifact types based on its name in the DESCRIBE. The ArtifactCreator returns concrete instances of Artifacts now.
|
| Tue, 12 Apr 2011 13:11:46 +0000 |
Ingo Weinzierl |
The project list is sorted now.
|
| Tue, 12 Apr 2011 11:01:09 +0000 |
Ingo Weinzierl |
Filled the context menu point 'Open project' of the ProjectList with life - it opens a new window displaying the parameterization of the selected project.
|
| Tue, 12 Apr 2011 10:54:59 +0000 |
Ingo Weinzierl |
Improved the CollectionView and the ParameterList - both can be initialized with an existing artifact (parameterization).
|
| Tue, 12 Apr 2011 10:51:39 +0000 |
Ingo Weinzierl |
Added more i18n error messages.
|
| Tue, 12 Apr 2011 10:50:32 +0000 |
Ingo Weinzierl |
The CollectionRecord implements a method that returns the Collection objects which is represented by the record now.
|
| Tue, 12 Apr 2011 07:56:33 +0000 |
Ingo Weinzierl |
Added a new service to query an artifact description.
|
| Mon, 11 Apr 2011 15:38:43 +0000 |
Ingo Weinzierl |
Implemented a context menu for the project list.
|
| Mon, 11 Apr 2011 14:32:36 +0000 |
Ingo Weinzierl |
Implemented a service to fetch distance information of a river from the artifact server.
|
| Mon, 11 Apr 2011 14:29:54 +0000 |
Ingo Weinzierl |
Added a model class that represents a distance information.
|
| Fri, 08 Apr 2011 10:05:14 +0000 |
Ingo Weinzierl |
Improved the exception handling - added warnings for user authentication errors and errors that occur while fetching supported rivers.
|
| Fri, 08 Apr 2011 09:51:41 +0000 |
Ingo Weinzierl |
Added an exception class that should be used if the user authentication fails.
|
| Fri, 08 Apr 2011 08:51:28 +0000 |
Ingo Weinzierl |
Improved the exception handling of artifact / collection specific operations. Warning dialog are displayed after such an exception.
|
| Fri, 08 Apr 2011 08:45:15 +0000 |
Ingo Weinzierl |
Added a new exception class that is used to be thrown after artifact / collection operation specific errors.
|
| Thu, 07 Apr 2011 11:31:19 +0000 |
Ingo Weinzierl |
The ChartOutputTab calls the out() operation of a Collection now - no longer the out() of its first artifact.
|
| Thu, 07 Apr 2011 10:33:48 +0000 |
Ingo Weinzierl |
Fixed the function to toggle the language and added a warning dialog that informs the user about the creation of a new session.
|
| Tue, 05 Apr 2011 08:13:48 +0000 |
Ingo Weinzierl |
Removed the FLYSMessages interface and replaced it with a FLYSConstants interface - this interface has the ability to lookup i18n strings with given keys.
|
| Tue, 05 Apr 2011 06:25:17 +0000 |
Ingo Weinzierl |
Implemented the button to toggle the current locale.
|
| Tue, 05 Apr 2011 06:24:13 +0000 |
Ingo Weinzierl |
Added missing i18n footer strings.
|
| Wed, 30 Mar 2011 13:49:28 +0000 |
Ingo Weinzierl |
Tagged RELEASE 0.1 of FLYS Client.
|
| Fri, 28 Sep 2012 12:14:07 +0200 |
Thomas Arendsen Hein |
merged flys-backend/0.1
0.1
|
| Mon, 28 Mar 2011 14:32:42 +0000 |
Sascha L. Teichmann |
Fixed swap of operands in importer.
|
| Mon, 28 Mar 2011 09:46:24 +0000 |
Sascha L. Teichmann |
Forgot to save the last change before commit.
|
| Mon, 28 Mar 2011 09:06:30 +0000 |
Sascha L. Teichmann |
Added methods to find out if two ranges intersects.
|
| Thu, 24 Mar 2011 16:47:05 +0000 |
Sascha L. Teichmann |
Added an one to many relation to the discharge tables of a gauge.
|
| Wed, 23 Mar 2011 16:33:36 +0000 |
Sascha L. Teichmann |
Finished import of WSTs.
|
| Wed, 23 Mar 2011 15:22:32 +0000 |
Sascha L. Teichmann |
Build models for wsts, wst columns and q ranges and store them in the backend.
|
| Wed, 23 Mar 2011 10:46:58 +0000 |
Sascha L. Teichmann |
Add a hack to repair the units in WST files extraction.
|
| Tue, 22 Mar 2011 15:48:09 +0000 |
Sascha L. Teichmann |
Ported over some WST parsing stuff from desktop flys
|
| Tue, 22 Mar 2011 12:15:18 +0000 |
Ingo Weinzierl |
Added import code for importing discharge tables.
|
| Tue, 22 Mar 2011 11:10:01 +0000 |
Sascha L. Teichmann |
Added stub for WST parser.
|
| Tue, 22 Mar 2011 11:01:51 +0000 |
Sascha L. Teichmann |
Added importer helper model stubs for WST imports.
|
| Mon, 21 Mar 2011 15:06:47 +0000 |
Sascha L. Teichmann |
Second part of parsing/storing main values. Should be finished now.
|
| Mon, 21 Mar 2011 10:52:33 +0000 |
Sascha L. Teichmann |
Fixed wrong unique constraint.
|
| Mon, 21 Mar 2011 10:41:47 +0000 |
Sascha L. Teichmann |
Add forgotten column river_id in Gauges.
|
| Mon, 21 Mar 2011 10:27:14 +0000 |
Sascha L. Teichmann |
Added missing ImportGauge.getPeer() method
|
| Mon, 21 Mar 2011 10:01:56 +0000 |
Sascha L. Teichmann |
Propagate river into storing of gauges.
|
| Mon, 21 Mar 2011 09:52:26 +0000 |
Sascha L. Teichmann |
Added stub code to write gauges
|
| Fri, 18 Mar 2011 16:12:24 +0000 |
Sascha L. Teichmann |
First part of parsing main values.
|
| Fri, 18 Mar 2011 12:10:33 +0000 |
Sascha L. Teichmann |
Store annotations in backend.
|
| Thu, 17 Mar 2011 18:07:13 +0000 |
Sascha L. Teichmann |
Importer: Bound Attributes and Positions to there backend peers.
|
| Thu, 17 Mar 2011 17:43:57 +0000 |
Sascha L. Teichmann |
Added parser to read *.KM files.
|
| Thu, 17 Mar 2011 16:12:39 +0000 |
Sascha L. Teichmann |
Added new helper models for import.
|
| Thu, 17 Mar 2011 15:21:50 +0000 |
Sascha L. Teichmann |
Added parsing of PEGEL.GLT files.
|
| Thu, 17 Mar 2011 10:47:31 +0000 |
Sascha L. Teichmann |
Importer: Used thread local pattern to make sharing of session easier.
|
| Thu, 17 Mar 2011 10:29:18 +0000 |
Sascha L. Teichmann |
Importer: Fixed error in HQL statement.
|
| Thu, 17 Mar 2011 10:00:56 +0000 |
Sascha L. Teichmann |
Commented out a debug block because it leaks the db password.
|
| Wed, 16 Mar 2011 18:23:45 +0000 |
Sascha L. Teichmann |
Store imported rivers into database. Needs testing!
|
| Wed, 16 Mar 2011 17:28:16 +0000 |
Sascha L. Teichmann |
Default connection parameters are now overwritable with system properties.
|
| Wed, 16 Mar 2011 17:16:27 +0000 |
Sascha L. Teichmann |
Expose the creation of the SessionFactory to the public to
|
| Wed, 16 Mar 2011 17:01:55 +0000 |
Sascha L. Teichmann |
Importer: Added info gew parser.
|
| Tue, 15 Mar 2011 17:29:11 +0000 |
Sascha L. Teichmann |
SessionFactoryProvider for access to the backend.
|
| Tue, 15 Mar 2011 16:31:14 +0000 |
Sascha L. Teichmann |
Added dependency to artifacts-commons to be able to use the global configuration of the artifact database.
|
| Tue, 15 Mar 2011 14:49:56 +0000 |
Sascha L. Teichmann |
Added foreign key constraint annotations to model classes.
|
| Mon, 14 Mar 2011 15:40:14 +0000 |
Sascha L. Teichmann |
Fixed wrong spelled column references in foreign keys introduces with last change.
|
| Mon, 14 Mar 2011 15:29:00 +0000 |
Sascha L. Teichmann |
Added column annotations for simple fields. TODO: foreign keys.
|
| Mon, 14 Mar 2011 14:52:58 +0000 |
Sascha L. Teichmann |
Added entity and id annotations.
|
| Mon, 14 Mar 2011 11:31:00 +0000 |
Sascha L. Teichmann |
Added missing sequences. Deleted unsupported sqlite schema.
|
| Fri, 11 Mar 2011 16:23:42 +0000 |
Sascha L. Teichmann |
Bound Apache Commons DBCP with Hibernate.
|
| Fri, 11 Mar 2011 14:41:18 +0000 |
Sascha L. Teichmann |
More Hibernate/JPA stuff
|
| Thu, 10 Mar 2011 13:44:51 +0000 |
Sascha L. Teichmann |
Added POJOs to be mapped to schema.
|
| Wed, 09 Mar 2011 15:24:57 +0000 |
Sascha L. Teichmann |
Added dependency Hibernate Core 3.6.1 Final
|
| Wed, 09 Mar 2011 15:01:51 +0000 |
Sascha L. Teichmann |
Created a new empty maven project
|
| Wed, 09 Mar 2011 14:07:15 +0000 |
Sascha L. Teichmann |
Converted schema to be PostgreSQL compatible.
|
| Wed, 09 Mar 2011 09:41:01 +0000 |
Sascha L. Teichmann |
Factorized time intervals out into a separated table.
|
| Tue, 22 Feb 2011 10:34:53 +0000 |
Sascha L. Teichmann |
Initial database import scripts. Not finished, yet.
|
| Thu, 10 Feb 2011 12:07:35 +0000 |
Sascha L. Teichmann |
Initial check in of the FLYS database backend.
|
| Fri, 28 Sep 2012 12:14:07 +0200 |
Thomas Arendsen Hein |
merged flys-artifacts/0.1
|
| Wed, 30 Mar 2011 08:22:30 +0000 |
Ingo Weinzierl |
Renamed an output mode in the WINFO artifact configuration.
|
| Tue, 29 Mar 2011 13:57:25 +0000 |
Ingo Weinzierl |
Changed a german string in the resource bundle.
|
| Tue, 29 Mar 2011 09:54:06 +0000 |
Ingo Weinzierl |
Adapted the available calculation modes of WINFO and its order in the DESCRIBE document.
|
| Mon, 28 Mar 2011 16:58:17 +0000 |
Ingo Weinzierl |
Added the hash code of an artifact to the artifact part of the collection's DESCRIBE document.
|
| Mon, 28 Mar 2011 16:36:13 +0000 |
Ingo Weinzierl |
Changed the background color of discharge curves to white.
|
| Mon, 28 Mar 2011 15:21:27 +0000 |
Sascha L. Teichmann |
DischargeTables: Cache the scale, too. Otherwise two calls to getValues() with different arguments will result in the same output.
|
| Mon, 28 Mar 2011 14:33:36 +0000 |
Ingo Weinzierl |
The out() operation of the WINFO artifact draws discharge tables for gauges specified by the user.
|
| Mon, 28 Mar 2011 10:48:27 +0000 |
Ingo Weinzierl |
Added a helper class to export charts.
|
| Mon, 28 Mar 2011 09:17:25 +0000 |
Sascha L. Teichmann |
Add factory to fetch gauges from database and filter them
|
| Fri, 25 Mar 2011 13:51:09 +0000 |
Sascha L. Teichmann |
Don't used interleaved x/y data.
|
| Fri, 25 Mar 2011 11:03:51 +0000 |
Ingo Weinzierl |
Updated the TODO list.
|
| Fri, 25 Mar 2011 10:23:59 +0000 |
Ingo Weinzierl |
Bugfix: Added a missing artifact namespace prefix in the DESCRIBE document of a FLYSArtifactCollection.
|
| Thu, 24 Mar 2011 18:47:07 +0000 |
Ingo Weinzierl |
Implemented a FLYSArtifactCollection that will be used in this application now.
|
| Thu, 24 Mar 2011 17:29:08 +0000 |
Sascha L. Teichmann |
Fetch w/q values of discharge tables for given gauges.
|
| Thu, 24 Mar 2011 17:06:08 +0000 |
Ingo Weinzierl |
Added a further german resource bundle.
|
| Wed, 23 Mar 2011 10:52:01 +0000 |
Ingo Weinzierl |
The DESCRIBE of the WINFO artifact contains the available output modes now.
|
| Tue, 22 Mar 2011 16:09:30 +0000 |
Ingo Weinzierl |
The location_distance state of the WINFO parameterization has an output mode 'discharge_table' now.
|
| Mon, 21 Mar 2011 09:18:04 +0000 |
Ingo Weinzierl |
Append human readable strings of the selected values to the DESCRIBE output.
|
| Mon, 21 Mar 2011 09:16:17 +0000 |
Ingo Weinzierl |
Added some more calculation types (to the DESCRIBE in the calculation select state).
|
| Mon, 21 Mar 2011 08:17:15 +0000 |
Ingo Weinzierl |
Implemented the step-back part of the advance() operation.
|
| Mon, 21 Mar 2011 06:11:01 +0000 |
Ingo Weinzierl |
Fixed a german umlaut.
|
| Fri, 18 Mar 2011 09:42:21 +0000 |
Ingo Weinzierl |
Added new states to insert location/distance and w/q data in the config of a WINFO artifact.
|
| Fri, 18 Mar 2011 09:38:11 +0000 |
Ingo Weinzierl |
Added a new state for the W/Q input in the WINFO parameterization.
|
| Fri, 18 Mar 2011 08:50:42 +0000 |
Ingo Weinzierl |
New state for the location/distance input and some litte modifications of the DefaultState.
|
| Thu, 17 Mar 2011 16:37:39 +0000 |
Ingo Weinzierl |
Added a method to retrieve the UIProvider for a state.
|
| Thu, 17 Mar 2011 16:03:36 +0000 |
Ingo Weinzierl |
Let the states describe the static ui part.
|
| Thu, 17 Mar 2011 12:17:37 +0000 |
Ingo Weinzierl |
The 'rivers' service retrieves the rivers from backend now.
|
| Thu, 17 Mar 2011 11:46:43 +0000 |
Sascha L. Teichmann |
Added support for the flys backend and an example how to use it.
|
| Tue, 15 Mar 2011 17:12:58 +0000 |
Sascha L. Teichmann |
Added section in configuration for database backend.
|
| Tue, 15 Mar 2011 15:53:02 +0000 |
Sascha L. Teichmann |
Fixed build error coming from different import of XMLUtils.
|
| Mon, 14 Mar 2011 17:43:52 +0000 |
Ingo Weinzierl |
Appended a missing node to the DESCRIBE.
|
| Mon, 14 Mar 2011 16:32:42 +0000 |
Ingo Weinzierl |
I18N of strings for the DESCRIBE document.
|
| Mon, 14 Mar 2011 15:47:10 +0000 |
Ingo Weinzierl |
Introduced a state to select the calculation mode.
|
| Mon, 14 Mar 2011 15:43:12 +0000 |
Ingo Weinzierl |
Added an abstract base class DefaultState for States.
|
| Mon, 14 Mar 2011 14:16:37 +0000 |
Ingo Weinzierl |
Implemented a singleton instance that provides i18n strings.
|
| Thu, 10 Mar 2011 13:31:36 +0000 |
Ingo Weinzierl |
Appende the static data to the static node of the DESCRIBE document.
|
| Thu, 10 Mar 2011 08:38:05 +0000 |
Ingo Weinzierl |
The operations feed() and advance() return the current description of the artifact now.
|
| Thu, 10 Mar 2011 05:56:17 +0000 |
Ingo Weinzierl |
Implemented the step-forward part of the advance operation.
|
| Wed, 09 Mar 2011 14:13:57 +0000 |
Ingo Weinzierl |
Implemented the feed() operation.
|
| Wed, 09 Mar 2011 14:07:03 +0000 |
Ingo Weinzierl |
Added a TODO file.
|
| Wed, 09 Mar 2011 11:29:07 +0000 |
Ingo Weinzierl |
Added a FLYSArtifact that serves as the default artifact for the FLYS application.
|
| Tue, 08 Mar 2011 17:22:37 +0000 |
Ingo Weinzierl |
Added a RiverService (/service/rivers) that retrieves a list of provided rivers.
|
| Mon, 07 Mar 2011 14:43:14 +0000 |
Ingo Weinzierl |
Added a nodes for the user-factory and collection-factory to the configuration.
|
| Tue, 01 Mar 2011 17:18:08 +0000 |
Ingo Weinzierl |
Replaced the 'special' attribute of the DESCRIBE with a 'uiprovider' attribute.
|
| Tue, 08 Feb 2011 09:11:25 +0000 |
Ingo Weinzierl |
The RiverSelect state creates the dynamic UI part for the describe document now.
|
| Tue, 08 Feb 2011 09:02:18 +0000 |
Ingo Weinzierl |
Added mockup classes for working with rivers.
|
| Mon, 07 Feb 2011 17:42:14 +0000 |
Ingo Weinzierl |
The input data items of a state are read from configuration after the state has been setup.
|
| Mon, 07 Feb 2011 11:37:33 +0000 |
Ingo Weinzierl |
Added the current state and reachable states description to the describe document of the WINFO artifact.
|
| Mon, 07 Feb 2011 11:32:59 +0000 |
Ingo Weinzierl |
Changed the way of storing transitions in the TransitionEngine.
|
| Fri, 04 Feb 2011 16:57:08 +0000 |
Ingo Weinzierl |
Improved the WINFO artifact. Describe() returns the uuid and the hash of the artifact instead of just nothing.
|
| Fri, 04 Feb 2011 11:18:59 +0000 |
Ingo Weinzierl |
Improved the init process of the WINFOArtifact - there are two new states to select the river and the gauge.
|
| Fri, 04 Feb 2011 11:11:03 +0000 |
Ingo Weinzierl |
Added missing StateFactory class of the last commit.
|
| Fri, 04 Feb 2011 11:09:11 +0000 |
Ingo Weinzierl |
Improved the bootstrap process - the states are initialized.
|
| Thu, 03 Feb 2011 10:23:30 +0000 |
Ingo Weinzierl |
Initializes a TransitionEngine storing all transitions for each artifact at the application start.
|
| Wed, 02 Feb 2011 14:56:22 +0000 |
Ingo Weinzierl |
Added a first stub of an WINFO artifact.
|
| Tue, 01 Feb 2011 17:56:29 +0000 |
Sascha L. Teichmann |
Added initial mvn project for FLYS artifacts.
|
| Wed, 30 Mar 2011 08:35:50 +0000 |
Ingo Weinzierl |
Removed some out commented code that have been commited by mistaken.
|
| Wed, 30 Mar 2011 08:33:24 +0000 |
Ingo Weinzierl |
Improved the way how to i18n strings in our application.
|
| Wed, 30 Mar 2011 07:54:07 +0000 |
Ingo Weinzierl |
Removed useless imports.
|
| Wed, 30 Mar 2011 07:40:53 +0000 |
Ingo Weinzierl |
Bugfix: A collection view just creates a single time a new collection - even if we step back to a previous state and go forward afterwards.
|
| Wed, 30 Mar 2011 07:35:59 +0000 |
Ingo Weinzierl |
Added a new service to describe collections.
|
| Wed, 30 Mar 2011 07:31:50 +0000 |
Ingo Weinzierl |
Replaced a german string in the ProjectList.
|
| Tue, 29 Mar 2011 13:53:24 +0000 |
Ingo Weinzierl |
Integrated the ProjectList into the client. Now, the Collections of a user are displayed in the list.
|
| Tue, 29 Mar 2011 13:49:04 +0000 |
Ingo Weinzierl |
Added a service that returns the collections of a specified user.
|
| Tue, 29 Mar 2011 13:44:53 +0000 |
Ingo Weinzierl |
A collection provides a method to retrieve its creation time now.
|
| Tue, 29 Mar 2011 12:51:09 +0000 |
Raimund Renkert |
Fixed some issues.
|
| Tue, 29 Mar 2011 12:39:31 +0000 |
Raimund Renkert |
Added style information to avoid body margin.
|
| Tue, 29 Mar 2011 11:55:34 +0000 |
Raimund Renkert |
Changed some german strings.
|
| Tue, 29 Mar 2011 11:42:15 +0000 |
Raimund Renkert |
Resized CollectionView and set the content size to have a tabled style.
|
| Tue, 29 Mar 2011 10:11:57 +0000 |
Ingo Weinzierl |
The title of the parameter tab will change after the module has been selectd.
|
| Tue, 29 Mar 2011 09:45:57 +0000 |
Ingo Weinzierl |
Modified the URL of the 'back button' image.
|
| Tue, 29 Mar 2011 09:12:14 +0000 |
Raimund Renkert |
Fixed toggle method.
|
| Mon, 28 Mar 2011 17:04:17 +0000 |
Ingo Weinzierl |
Bugfix: Step back will remove duplicated output tab and an extended chart image URL bypasses the browser cache.
|
| Mon, 28 Mar 2011 16:20:45 +0000 |
Ingo Weinzierl |
Added a further plugin in the module selection and changed its alignment to vertical.
|
| Mon, 28 Mar 2011 16:11:44 +0000 |
Ingo Weinzierl |
Removed a label from ChartOutputTab.
|
| Mon, 28 Mar 2011 16:10:40 +0000 |
Ingo Weinzierl |
Removed the title (date string) of CollectionViews.
|
| Mon, 28 Mar 2011 16:00:23 +0000 |
Ingo Weinzierl |
Improved the positioning of helper widgets and some layout specific stuff.
|
| Mon, 28 Mar 2011 15:23:51 +0000 |
Raimund Renkert |
The project list button toggles the project list now.
|
| Mon, 28 Mar 2011 13:24:13 +0000 |
Raimund Renkert |
Replaced next button image with smart gwt button.
|
| Mon, 28 Mar 2011 11:59:00 +0000 |
Raimund Renkert |
Added footer and a spacer to the webpage layout.
|
| Mon, 28 Mar 2011 11:33:09 +0000 |
Raimund Renkert |
Customized background and ProjectList styles.
|
| Mon, 28 Mar 2011 10:45:45 +0000 |
Ingo Weinzierl |
Added a service that builds up requests to retrieve chart images. Use this service to display charts in the ChartOutputTab.
|
| Mon, 28 Mar 2011 10:40:50 +0000 |
Raimund Renkert |
Limited the area for CollectionView to the size of FLYSWorkspace.
|
| Mon, 28 Mar 2011 09:14:52 +0000 |
Ingo Weinzierl |
Fixed a typo.
|
| Mon, 28 Mar 2011 07:55:39 +0000 |
Ingo Weinzierl |
Added a panel that will be used to display chart output.
|
| Mon, 28 Mar 2011 07:09:34 +0000 |
Ingo Weinzierl |
Available output modes are displayed in the tab bar of the collection view.
|
| Mon, 28 Mar 2011 06:48:44 +0000 |
Ingo Weinzierl |
Moved parameterization specific code from CollectionView to ParameterList.
|
| Sat, 26 Mar 2011 18:07:41 +0000 |
Ingo Weinzierl |
Moved ParameterList specific code into the ParameterList.
|
| Fri, 25 Mar 2011 11:51:54 +0000 |
Ingo Weinzierl |
Adjusted the return type of the CreateCollectionService and added code to react on Collection changes (like output modes).
|
| Fri, 25 Mar 2011 11:41:55 +0000 |
Ingo Weinzierl |
Made the AddArtifactService accessible in the web.xml
|
| Fri, 25 Mar 2011 11:37:36 +0000 |
Ingo Weinzierl |
Added a service to add artifacts to collections.
|
| Fri, 25 Mar 2011 11:32:33 +0000 |
Raimund Renkert |
Changed theme to smartgwt Enterprise Blue.
|
| Fri, 25 Mar 2011 09:19:29 +0000 |
Ingo Weinzierl |
Added CollectionItems and Facets and replaced Artifact references in Collection with CollectionItems.
|
| Thu, 24 Mar 2011 15:48:13 +0000 |
Raimund Renkert |
Customized style for header and mainmenu.
|
| Wed, 23 Mar 2011 11:19:18 +0000 |
Ingo Weinzierl |
The output modes of an artifact are extracted from DESCRIBE document and put into the ArtifactDescription.
|
| Wed, 23 Mar 2011 11:06:31 +0000 |
Ingo Weinzierl |
Enhanced the ArtifactDescription and its default implementation to provide output modes.
|
| Wed, 23 Mar 2011 10:58:07 +0000 |
Ingo Weinzierl |
Added an interface and its default implementation to describe an output mode of an artifact.
|
| Mon, 21 Mar 2011 09:56:00 +0000 |
Ingo Weinzierl |
Moved image sources to an own directory to avoid that those files are included in the web application archive.
|
| Mon, 21 Mar 2011 09:21:01 +0000 |
Ingo Weinzierl |
Display human readable strings of the selected values in the UI.
|
| Mon, 21 Mar 2011 08:28:02 +0000 |
Ingo Weinzierl |
Implemented a mechanism to step back to previous states.
|
| Fri, 18 Mar 2011 13:45:34 +0000 |
Ingo Weinzierl |
Save the data explicitly in the LocationDistancePanel and WQInputPanel before returning the user input to avoid a nullpointer exception.
|
| Fri, 18 Mar 2011 12:01:55 +0000 |
Ingo Weinzierl |
The 'old' items in the parameter panel have a button to step back to a previous state (NOTE: just the UI stuff is implemented now).
|
| Fri, 18 Mar 2011 11:32:05 +0000 |
Ingo Weinzierl |
Adjusted the look of the 'next' button in the parameter panel.
|
| Fri, 18 Mar 2011 09:36:28 +0000 |
Ingo Weinzierl |
Read min/max values for the distance modes in WQInputPanel.
|
| Fri, 18 Mar 2011 08:45:25 +0000 |
Ingo Weinzierl |
Read min/max values for the distance mode in the LocationDistancePanel.
|
| Fri, 18 Mar 2011 07:45:34 +0000 |
Ingo Weinzierl |
Remove the dynamic parameter panel if a state is reached that doesn't need any user input.
|
| Thu, 17 Mar 2011 18:34:20 +0000 |
Ingo Weinzierl |
The widgets in the static part of the parameter panel are created using UIProviders now. The ParameterList does not build widgets any longer.
|
| Thu, 17 Mar 2011 18:20:05 +0000 |
Ingo Weinzierl |
The DataList has a label now.
|
| Thu, 17 Mar 2011 16:44:51 +0000 |
Ingo Weinzierl |
Introduced a data structure DataList to manage to list of Data objects of a single state.
|
| Thu, 17 Mar 2011 11:49:03 +0000 |
Ingo Weinzierl |
Added space between old params panel and new params panel.
|
| Thu, 17 Mar 2011 11:39:27 +0000 |
Ingo Weinzierl |
Some refactoring (imports, etc).
|
| Thu, 17 Mar 2011 11:23:07 +0000 |
Ingo Weinzierl |
Render the Single-W panel initially when the WQInputPanel is rendered.
|
| Thu, 17 Mar 2011 10:54:41 +0000 |
Ingo Weinzierl |
Implemented the getData() method of the WQInputPanel.
|
| Thu, 17 Mar 2011 10:28:03 +0000 |
Ingo Weinzierl |
Implemented the getData() method of the LocationDistancePanel.
|
| Thu, 17 Mar 2011 09:54:05 +0000 |
Ingo Weinzierl |
Some GUI improvements in the Location/Distance, W/Q and Module panels.
|
| Thu, 17 Mar 2011 09:29:10 +0000 |
Ingo Weinzierl |
Enhanced the UIProviderFactory.
|
| Wed, 16 Mar 2011 16:24:43 +0000 |
Ingo Weinzierl |
Refactored the LocationDistancePanel, so that is uses the DoubleArrayPanel and DoubleRangePanel from the last commit as well.
|
| Wed, 16 Mar 2011 15:52:13 +0000 |
Ingo Weinzierl |
Added a new widget to enter w/Q values in single and range mode.
|
