log

age author description
Mon, 08 Sep 2014 16:06:50 +0200 Sascha L. Teichmann Merged.
Mon, 08 Sep 2014 16:06:34 +0200 Sascha L. Teichmann Made it compile with changed ContextInjector interface again.
Mon, 08 Sep 2014 15:54:12 +0200 Tom Gottfried Let official epochs be showy and remove detritus of 'yields' in datacage config.
Mon, 08 Sep 2014 15:48:11 +0200 Sascha L. Teichmann Call context inspector in output helper.
Mon, 08 Sep 2014 13:33:39 +0200 Sascha L. Teichmann Stop stupid propagation of out subtype in generators. What is this? It is not used anyway.
Mon, 08 Sep 2014 13:17:49 +0200 Sascha L. Teichmann Added context injector to generators.
Mon, 08 Sep 2014 12:28:16 +0200 Sascha L. Teichmann Merged
Mon, 08 Sep 2014 12:27:55 +0200 Sascha L. Teichmann Anti programming: Throw CrossSectionApp away. Not useful ATM. The backing data structures are fine now and the original purpose of the app was to figure them out.
Mon, 08 Sep 2014 12:25:47 +0200 Tom Gottfried We only need to know what's going on upstream.
Mon, 08 Sep 2014 12:21:32 +0200 Tom Gottfried Fetch missing values from database and show them in diagrams.
Mon, 08 Sep 2014 10:03:00 +0200 Tom Gottfried Allow fractions without SQ-time interval (suspended sediment) to be loaded.
Fri, 05 Sep 2014 20:57:31 +0200 Tom Gottfried Error reports for sediment load calculation.
Fri, 05 Sep 2014 19:30:50 +0200 Andre Heinecke Do not inherit smartgwt include the javascript directly in FLYS.html superdev
Fri, 05 Sep 2014 19:29:11 +0200 Andre Heinecke Update GWT to 2.6.1 superdev
Fri, 05 Sep 2014 15:09:44 +0200 Andre Heinecke (issue1448) Use left join to permit loads with empty sq_time intervals to be handled.
Fri, 05 Sep 2014 18:30:20 +0200 Sascha L. Teichmann Fixed broken build.
Fri, 05 Sep 2014 18:23:36 +0200 Sascha L. Teichmann Sediment load: converted grain fraction name to an array lookup.
Fri, 05 Sep 2014 16:54:45 +0200 Raimund Renkert Added new processor for fix derived curve.
Fri, 05 Sep 2014 15:57:39 +0200 Raimund Renkert Added processor for discharge curve in fixanalysis.
Fri, 05 Sep 2014 15:26:40 +0200 Tom Gottfried Do not return pure NaN data.
Fri, 05 Sep 2014 14:53:58 +0200 Tom Gottfried Sediment loads at measurement stations and longitudinal sections need different processing and styling for diagrams.
Fri, 05 Sep 2014 13:19:22 +0200 Sascha L. Teichmann sed 's/logger/log/g' src/**/*.java
Fri, 05 Sep 2014 12:58:17 +0200 Sascha L. Teichmann sed src/**/*.java 's/logger/log/g'
Fri, 05 Sep 2014 12:54:58 +0200 Sascha L. Teichmann Make it compile again.
Fri, 05 Sep 2014 12:50:33 +0200 Sascha L. Teichmann sed -i src/**/*.java 's/logger/log/g'
Fri, 05 Sep 2014 12:22:42 +0200 Andre Heinecke (issue1448) Add sq time intervals to sediment load data model.
Fri, 05 Sep 2014 12:19:13 +0200 Sascha L. Teichmann Forget to adjust a string reference to a moved backend utils class.
Fri, 05 Sep 2014 10:27:50 +0200 Sascha L. Teichmann Anti programming: Removed obsolete classes in client. This may break stuff because of the GWT magic.
Fri, 05 Sep 2014 10:10:42 +0200 Sascha L. Teichmann Find obsolete Java files in more than one project hierachie.
Fri, 05 Sep 2014 10:09:16 +0200 Sascha L. Teichmann Anti programming: Removed TIM parser which ist not needed any longer.
Thu, 04 Sep 2014 17:47:32 +0200 Sascha L. Teichmann Removed obsolete imports.
Thu, 04 Sep 2014 17:33:01 +0200 Tom Gottfried Sum up fractions from stations and previous stations according to respective validity model.
Thu, 04 Sep 2014 16:25:06 +0200 Sascha L. Teichmann Add Q'n'D Python script to find obsolete Java files.
Thu, 04 Sep 2014 15:48:48 +0200 Sascha L. Teichmann merged
Thu, 04 Sep 2014 15:43:13 +0200 Sascha L. Teichmann Anti programming.
Thu, 04 Sep 2014 15:27:47 +0200 Raimund Renkert merged.
Thu, 04 Sep 2014 15:26:55 +0200 Raimund Renkert Use processors for historical discharge curves.
Thu, 04 Sep 2014 15:03:25 +0200 Sascha L. Teichmann Moved package org.dive4elements.river.utils to org.dive4elements.river.backend.utils.
Thu, 04 Sep 2014 13:00:55 +0200 Sascha L. Teichmann Removed NASTY package clash. We had too org.dive4elements.river.util packages.
Thu, 04 Sep 2014 12:03:02 +0200 Tom Gottfried Removed obsolete average and renamed some symbols to make the difference between single fractions and sums of them clearer in the calculation.
Thu, 04 Sep 2014 12:00:17 +0200 Sascha L. Teichmann Remove dead class.
Thu, 04 Sep 2014 11:15:34 +0200 Raimund Renkert merged.
Thu, 04 Sep 2014 11:14:24 +0200 Raimund Renkert Changed discharge processor to plot only discharge curves and added processor for computed discharge curves.
Thu, 04 Sep 2014 11:10:37 +0200 Raimund Renkert Added new processor to plot misc discharge data, e.g. from datacage or recommendations.
Wed, 03 Sep 2014 18:21:35 +0200 Tom Gottfried The existing implementation respects the fact that months are 0-based.
Wed, 03 Sep 2014 16:46:09 +0200 Tom Gottfried Complete CSV-export and correct headers.
Wed, 03 Sep 2014 10:24:39 +0200 Tom Gottfried Rev aa80f9ba56a9 was incomplete. Shame on me.
Wed, 03 Sep 2014 09:55:32 +0200 Tom Gottfried We have to calculate bed load plus suspended sand instead of suspended load.
Tue, 02 Sep 2014 17:47:03 +0200 Tom Gottfried Let epochs be averages over their years.
Tue, 02 Sep 2014 17:10:22 +0200 Tom Gottfried Precalculated sums from the database will come through recommendations.
Tue, 02 Sep 2014 14:46:20 +0200 Tom Gottfried Make sedimentload loadable as old calculation.
Mon, 01 Sep 2014 17:50:22 +0200 Tom Gottfried Only calculated sums of fractions should be initially shown in diagram.
Mon, 01 Sep 2014 12:34:39 +0200 Tom Gottfried Fix fraction respectively facet names and descriptions.
Mon, 01 Sep 2014 10:15:57 +0200 Tom Gottfried Broken -> broke away.
Mon, 01 Sep 2014 10:09:53 +0200 Tom Gottfried Do not handle the impossible.
Mon, 01 Sep 2014 09:43:55 +0200 Tom Gottfried Handle missing years in bed height differences without assuming an unknown year to be BC 1.
Fri, 29 Aug 2014 17:00:26 +0200 Sascha L. Teichmann Converted configuration for discharge diagrams to the new Q symmetry style.
Fri, 29 Aug 2014 16:42:58 +0200 Sascha L. Teichmann Added diagram defaults for discharge diagrams.
Fri, 29 Aug 2014 16:24:12 +0200 Sascha L. Teichmann Renamed tag in sq relation defaults to a more fitting name.
Fri, 29 Aug 2014 16:21:31 +0200 Sascha L. Teichmann Added new diagramm generator for Q symmetry.
Fri, 29 Aug 2014 15:44:08 +0200 Sascha L. Teichmann More shoveling araound generators.
Fri, 29 Aug 2014 15:22:33 +0200 Sascha L. Teichmann Added a woking copy for discharge diagramm generators. All modifications are go in here. If the process is finished we'll remove the old one and rename the copy to discharge-diagramms.xml
Fri, 29 Aug 2014 13:03:11 +0200 Tom Gottfried We have only 4 of them.
Fri, 29 Aug 2014 12:42:00 +0200 Sascha L. Teichmann More fixes for conf.xml
Fri, 29 Aug 2014 12:27:35 +0200 Sascha L. Teichmann Moved external system entites back to conf.xml. Uncool.
Fri, 29 Aug 2014 11:56:10 +0200 Sascha L. Teichmann Cleaned up generator dependencies.
Fri, 29 Aug 2014 11:43:15 +0200 Sascha L. Teichmann Moved more generator stuff in reguarding sub directory.
Fri, 29 Aug 2014 11:31:17 +0200 Sascha L. Teichmann Allow deeper nesting of output-generators in conf.xml. This allows better separation of concerns of different generator types.
Fri, 29 Aug 2014 11:24:52 +0200 Sascha L. Teichmann Moved generators.xml and its dependencies to a directory of their own.
Fri, 29 Aug 2014 11:21:35 +0200 Sascha L. Teichmann Moved external system entity for longitudinal sections default to generators.xml. TODO: Move in entirely different file.
Fri, 29 Aug 2014 11:03:38 +0200 Sascha L. Teichmann Removed obsolete imports.
Fri, 29 Aug 2014 10:49:38 +0200 Sascha L. Teichmann Fixed build error.
Fri, 29 Aug 2014 09:25:00 +0200 Tom Gottfried The relevant contents are now in artifacts/doc/datacage_ref_de.rst.
Thu, 28 Aug 2014 18:42:20 +0200 Tom Gottfried IDs can be assumed to be unique.
Thu, 28 Aug 2014 15:34:57 +0200 Tom Gottfried Do not put metadata on series if there are none (avoid NPE).
Thu, 28 Aug 2014 12:00:52 +0200 Tom Gottfried Quoting is done elsewhere since rev 7021753b3797.
Wed, 27 Aug 2014 19:52:51 +0200 Tom Gottfried The rest is silence.
Wed, 27 Aug 2014 16:47:38 +0200 Sascha L. Teichmann Make Logarithmic axis immun against negative values (not throwing Exceptions in that case).
Wed, 27 Aug 2014 15:09:45 +0200 Tom Gottfried Let the facet know the period of it's data.
Wed, 27 Aug 2014 15:01:54 +0200 Tom Gottfried Calculate all single years in given interval but only once.
Tue, 26 Aug 2014 17:21:42 +0200 Sascha L. Teichmann Merged.
Tue, 26 Aug 2014 17:21:16 +0200 Sascha L. Teichmann Datacage: Insert variable values literally into output.
Tue, 26 Aug 2014 17:16:21 +0200 Tom Gottfried With the exception of real calculation results, descriptions of sediment loads can all follow the same pattern.
Tue, 26 Aug 2014 12:09:18 +0200 Tom Gottfried Metadata in datacage tooltips for sediment densities, bed heights, flow velocities and sounding widhts.
Tue, 26 Aug 2014 11:35:47 +0200 Sascha L. Teichmann Added missing generics parameter.
Tue, 26 Aug 2014 11:28:03 +0200 Sascha L. Teichmann Sediment load: Remove simple tail recursive calls from SedimentLoadData.recursiveFindStations(). More carefully this time.
Tue, 26 Aug 2014 11:18:03 +0200 Sascha L. Teichmann Removed obsolete same package imports.
Tue, 26 Aug 2014 11:16:21 +0200 Sascha L. Teichmann Removed obsolete imports.
Mon, 25 Aug 2014 20:12:11 +0200 Andre Heinecke Fix exporter loops
Mon, 25 Aug 2014 20:03:35 +0200 Andre Heinecke Acctually use the new Sedilmentload calculation
Mon, 25 Aug 2014 20:02:28 +0200 Andre Heinecke Make SedimentloadExporter work with the new result scheme.
Mon, 25 Aug 2014 20:01:44 +0200 Andre Heinecke Correctly handle not creating facets and error reports.
Mon, 25 Aug 2014 20:00:45 +0200 Andre Heinecke GetFractionByName now returns a list as it can differ in Epochs
Mon, 25 Aug 2014 19:59:14 +0200 Andre Heinecke Add period to sedimentloaddataresult fraction
Mon, 25 Aug 2014 19:58:00 +0200 Andre Heinecke Use old names for SedimentloadDataFractions and add average fraction
Mon, 25 Aug 2014 17:28:48 +0200 Andre Heinecke Actually return the period in SedimentLoadAccess
Mon, 25 Aug 2014 17:28:18 +0200 Andre Heinecke Fix compilation of last commit
Mon, 25 Aug 2014 17:14:49 +0200 Sascha L. Teichmann Another fix for find stations in sediment load.
Mon, 25 Aug 2014 16:04:35 +0200 Andre Heinecke Correctly output problems in SedimentLoadDataCalculate
Mon, 25 Aug 2014 15:56:09 +0200 Andre Heinecke (issue1448) Add WIP SedimentLoadDataFacet and use it in calculation.
Mon, 25 Aug 2014 12:18:35 +0200 Andre Heinecke (issue 1448) Use new data model for sedimentloadinfo
Mon, 25 Aug 2014 12:05:37 +0200 Sascha L. Teichmann Sediment load: Fixed findStations() and add findLoads().
Fri, 22 Aug 2014 18:00:35 +0200 Tom Gottfried Tooltip for sediment loads in datacage.
Fri, 22 Aug 2014 17:43:36 +0200 Tom Gottfried Add SQ time interval to selection tree in datacage for sediment loads.
Fri, 22 Aug 2014 13:19:02 +0200 Tom Gottfried Remove code duplications in sedimentload datacage.
Fri, 22 Aug 2014 08:04:43 +0200 Tom Gottfried Format timestamps in datacage tooltip for porosities.
Thu, 21 Aug 2014 18:58:10 +0200 Tom Gottfried Dashed lines shall be used for sediment load at measurement stations (issue1352).
Thu, 21 Aug 2014 18:09:37 +0200 Tom Gottfried Complete mapping and themes for sediment load.
Thu, 21 Aug 2014 15:48:01 +0200 Tom Gottfried Make a difference between themes representing loads in different units.
Wed, 20 Aug 2014 17:54:12 +0200 Tom Gottfried i18n for sediment loads.
Wed, 20 Aug 2014 17:47:58 +0200 Tom Gottfried Reconstruct facet description of sediment load longitudinal sections. i18n will follow.
Wed, 20 Aug 2014 17:07:17 +0200 Tom Gottfried Reconstruct facet description of sediment load at measurement stations. i18n will follow.
Wed, 20 Aug 2014 14:53:29 +0200 Tom Gottfried Let hg ignore downloaded SmartGWT stuff.
Wed, 20 Aug 2014 14:26:42 +0200 Andre Heinecke Change facet.sedimentload.dc to facet.sedimentload.ls
Wed, 20 Aug 2014 13:17:20 +0200 Andre Heinecke (issue1681) Add l10n for grain fractions
Wed, 20 Aug 2014 13:17:03 +0200 Andre Heinecke (issue1681) Handle different grain fraction kinds
Wed, 20 Aug 2014 12:59:01 +0200 Andre Heinecke Fix typo in sedimentload i18n
Wed, 20 Aug 2014 12:55:55 +0200 Andre Heinecke (issue1681) Add themes for sedimentloads
Wed, 20 Aug 2014 12:12:18 +0200 Andre Heinecke Remove todos about sedimentload_ls facet
Wed, 20 Aug 2014 12:10:59 +0200 Andre Heinecke Remove unecessary debut output
Wed, 20 Aug 2014 12:10:32 +0200 Andre Heinecke Configure SedimentLoadLSFacet
Wed, 20 Aug 2014 12:09:41 +0200 Andre Heinecke Add SedimentLoadLSFacet
Wed, 20 Aug 2014 12:00:50 +0200 Andre Heinecke Add getSedimentLoadById accessor
Tue, 19 Aug 2014 18:46:13 +0200 Tom Gottfried Distinction by measurement station gives lots of duplicates, as we always get a whole longitudinal section.
Fri, 15 Aug 2014 18:56:02 +0200 Andre Heinecke Fix binarysearch logic in SedimentLoadData
Fri, 15 Aug 2014 18:42:39 +0200 Andre Heinecke Add translation for sedimentloads
Fri, 15 Aug 2014 18:27:19 +0200 Andre Heinecke Add new and simplyfied SedimentLoadFacet
Fri, 15 Aug 2014 18:25:43 +0200 Andre Heinecke Fix ti_stop_time naming
Fri, 15 Aug 2014 18:24:55 +0200 Andre Heinecke Change sedimentload factory from yields to loads.
Fri, 15 Aug 2014 18:21:10 +0200 Andre Heinecke Configure sedimentload static facet
Fri, 15 Aug 2014 18:10:16 +0200 Andre Heinecke Rename the SedimentLoadDataFacet and add deprection comment
Fri, 15 Aug 2014 18:09:47 +0200 Andre Heinecke Revert accidental change.
Fri, 15 Aug 2014 18:09:08 +0200 Andre Heinecke Expose sedimentLoad stations
Fri, 15 Aug 2014 18:03:41 +0200 Andre Heinecke merge
Fri, 15 Aug 2014 14:28:26 +0200 Andre Heinecke Move the old data facet out of the way.
Fri, 15 Aug 2014 18:01:06 +0200 Sascha L. Teichmann Use list() instead of iterator(). Why does this not work?
Mon, 11 Aug 2014 18:34:21 +0200 Andre Heinecke Add comment on how to obtain smartgwt
Mon, 11 Aug 2014 18:33:50 +0200 Andre Heinecke Do not try to load empty files.
Tue, 12 Aug 2014 10:57:53 +0200 Sascha L. Teichmann Be more tolerant with not existing artifact configurations.
Mon, 11 Aug 2014 17:18:36 +0200 Sascha L. Teichmann Added the broken calculation state of the new sediment load calc.
Mon, 11 Aug 2014 16:45:42 +0200 Sascha L. Teichmann Removed same package import.
Mon, 11 Aug 2014 16:43:56 +0200 Sascha L. Teichmann Removed obsolete import.
Mon, 11 Aug 2014 16:42:31 +0200 Sascha L. Teichmann Merged
Mon, 11 Aug 2014 16:41:15 +0200 Sascha L. Teichmann Removed obsolete imports.
Mon, 11 Aug 2014 15:41:12 +0200 Andre Heinecke Build is locale sensitive. Force a UTF-8 locale for building.
Fri, 08 Aug 2014 13:24:11 +0200 Tom Gottfried Datacage config for new sediment load structures. Missing: some facets and everything down from the innermost macros for sediment load at measurement stations.
Thu, 07 Aug 2014 20:03:44 +0200 Sascha L. Teichmann Added $RADIUS zoom scale sub title logic to other diagrams.
Thu, 07 Aug 2014 19:59:08 +0200 Tom Gottfried Some typos in datacage config reference.
Thu, 07 Aug 2014 19:56:15 +0200 Sascha L. Teichmann Fixed sub title zoom stuff.
Thu, 07 Aug 2014 17:26:18 +0200 Sascha L. Teichmann Merged
Thu, 07 Aug 2014 17:24:33 +0200 Sascha L. Teichmann flys/issue1262: Introduce variable $RADIUS to be used in user defined chart sub titles.
Thu, 07 Aug 2014 13:05:35 +0200 Tom Gottfried Cleaned layout for infolines (issue1635).
Wed, 06 Aug 2014 19:17:12 +0200 Tom Gottfried SCHEMA CHANGE: rename database tables from yield to load_ls according to respective classes.
Tue, 05 Aug 2014 18:28:04 +0200 Sascha L. Teichmann Parse meta data for multi attribute data.
Tue, 05 Aug 2014 18:03:45 +0200 Sascha L. Teichmann Added meta infos for multi items to enable client to order the columns in a defined order.
Tue, 05 Aug 2014 16:34:04 +0200 Sascha L. Teichmann More idiomatic Java string concat.
Thu, 31 Jul 2014 18:14:22 +0200 Sascha L. Teichmann Sediment load: transform units for official epochs, too.
Thu, 31 Jul 2014 17:04:41 +0200 Sascha L. Teichmann Sediment load: refactored epoch calculation to not average over all but per year.
Wed, 30 Jul 2014 19:26:20 +0200 Sascha L. Teichmann Sediment load: fetch sediment density for transforming t/a to m^3/a.
Wed, 30 Jul 2014 19:06:35 +0200 Sascha L. Teichmann Sediment load: Cached sediment values dont depend on year. The cached object is an index over year so there is not need to ask the factory for this.
Wed, 30 Jul 2014 18:54:14 +0200 Sascha L. Teichmann Sediment load: Ensure that the lists of values are always ordered station wise. This was a hidden bug. :-/
Wed, 30 Jul 2014 18:34:48 +0200 Sascha L. Teichmann Sediment density: Got rid of stupid extra year tracking.
Wed, 30 Jul 2014 16:50:26 +0200 Sascha L. Teichmann Sedimen load: Added bundle for fraction results.
Wed, 23 Jul 2014 18:19:15 +0200 Andre Heinecke Fix wsplgen name
Fri, 18 Jul 2014 18:55:39 +0200 Sascha L. Teichmann Sediment load: More of official epochs.
Fri, 18 Jul 2014 18:01:49 +0200 Tom Gottfried SCHEMA CHANGE and Importer: get time intervals of SQ-relations from metalines in sediment load files.
Fri, 18 Jul 2014 17:43:27 +0200 Sascha L. Teichmann Sediment load: Fetch kind of sediment load from database to tell if it is official or not.
Fri, 18 Jul 2014 16:05:21 +0200 Sascha L. Teichmann Sediment load: More on calculating epoch loads.
Fri, 18 Jul 2014 15:37:26 +0200 Tom Gottfried Importer: Import sediment load at measurement stations.
Fri, 18 Jul 2014 13:03:28 +0200 Sascha L. Teichmann Sediment load. More off year based calculations.
Fri, 18 Jul 2014 12:22:51 +0200 Tom Gottfried My hint that MeasurementStation does not know it's river was not true. Thus backout rev 8c14588d1f78.
Fri, 18 Jul 2014 11:58:59 +0200 Sascha L. Teichmann Sediment load: dispatch calculation modes.
Fri, 18 Jul 2014 11:16:50 +0200 Sascha L. Teichmann Sediment load: take arguments from sediment access.
Fri, 18 Jul 2014 11:05:34 +0200 Sascha L. Teichmann Sediment load access: Cache values.
Thu, 17 Jul 2014 18:22:16 +0200 Sascha L. Teichmann Sediment load: Added more 'sums' to be calculated.
Thu, 17 Jul 2014 16:51:18 +0200 Sascha L. Teichmann Sediment load: (incomplete) new sediment load calculation.
Thu, 17 Jul 2014 11:37:25 +0200 Sascha L. Teichmann Sediment Load: Added table to figure out where grain fractions are measured.
Thu, 17 Jul 2014 11:19:59 +0200 Sascha L. Teichmann Sediment load: Added join to fetch measurement station via ranges which know the river. Added a visitor for values, too.
Thu, 17 Jul 2014 10:56:38 +0200 Sascha L. Teichmann ImporterSession: Load measurement stations via ranges which hold a reference to the river.
Thu, 17 Jul 2014 07:46:18 +0200 Sascha L. Teichmann Merged.
Thu, 17 Jul 2014 07:45:14 +0200 Sascha L. Teichmann Sediment load: Merge measurement stations if they have the same km. The chaining was too complicated to build algorithms on top of it.
Wed, 16 Jul 2014 19:11:31 +0200 Tom Gottfried Divide SedimentLoadLSParser into AbstractSedimentLoadParser and SedimentLoadLSParser to be able to reuse code for a new SedimentLoadParser for data at measurement stations.
Wed, 16 Jul 2014 18:33:28 +0200 Sascha L. Teichmann Introduce LineParserException for CSV file parsing.
Wed, 16 Jul 2014 17:09:02 +0200 Sascha L. Teichmann Sediment load: Recognize grain fractions 'total', 'bed_load' and 'suspended_load' from pre-calculations.
Wed, 16 Jul 2014 16:03:50 +0200 Sascha L. Teichmann Replace station list with a plain array.
Wed, 16 Jul 2014 15:53:11 +0200 Sascha L. Teichmann Use GF_UNKNOWN constant instead of -1 to identify unknown grain fractions.
Wed, 16 Jul 2014 13:06:09 +0200 Sascha L. Teichmann Directly chain stations with the same km position together. This ease some summations.
Wed, 16 Jul 2014 11:55:46 +0200 Sascha L. Teichmann Added filters for loaded sediment data values. Year, Epochs (time ranges), And and Or.
Wed, 16 Jul 2014 11:05:59 +0200 Sascha L. Teichmann Throw out old visitor model and use grain fraction filters instead. Fixed neighborhood wirinng of measument stations.
Tue, 15 Jul 2014 21:31:11 +0200 Sascha L. Teichmann Sediment loads from cache are sorted in station order so range filters
Tue, 15 Jul 2014 18:52:22 +0200 Sascha L. Teichmann Wire the neighbors to the measurement stations together. This eases the lookup for same types (suspended or bed load).
Tue, 15 Jul 2014 12:47:52 +0200 Sascha L. Teichmann New way to loaded sediment loads from database and cache it. The data structure a way more straight forward. TODO: Implement calculation on this basis.

http://dive4elements.wald.intevation.org