log

age author description
Fri, 26 Sep 2014 09:44:48 +0200 Tom Gottfried Main values: Reduce code duplication and correct logic to specify whether we are at gauge or not.
Fri, 26 Sep 2014 08:40:20 +0200 Tom Gottfried Avoid NPE if no dataset is activated in theme list.
Fri, 26 Sep 2014 08:36:28 +0200 Raimund Renkert Added config for sq relation loaded via datacage.
Thu, 25 Sep 2014 17:25:07 +0200 Raimund Renkert merged.
Thu, 25 Sep 2014 17:24:35 +0200 Raimund Renkert Use the sq relation artifact to load data from datacage.
Thu, 25 Sep 2014 17:23:12 +0200 Raimund Renkert Inject current km and pnp into the context used to calculate W in cm at gauge.
Thu, 25 Sep 2014 12:21:47 +0200 Tom Gottfried Reduce misspelled, superfluous logging.
Thu, 25 Sep 2014 11:00:31 +0200 Sascha L. Teichmann Removed obsolete imports.
Thu, 25 Sep 2014 10:56:44 +0200 Sascha L. Teichmann Use right logger in DischargeGenerator.
Thu, 25 Sep 2014 10:38:21 +0200 Sascha L. Teichmann Run native2ascii over FLYS*.properties.
Wed, 24 Sep 2014 18:33:11 +0200 Sascha L. Teichmann Added missing l10n strings.
Wed, 24 Sep 2014 17:39:29 +0200 Sascha L. Teichmann Generate a W in CM axis if there are W data.
Wed, 24 Sep 2014 16:42:55 +0200 Sascha L. Teichmann Added PNP injectors to Q/X diagrams.
Wed, 24 Sep 2014 16:38:13 +0200 Sascha L. Teichmann And Developer said, Let there be Q symmetry and there was Q symmetry.
Wed, 24 Sep 2014 16:24:32 +0200 Tom Gottfried Do not die if values <= 0 are tried to be plotted on log axis.
Wed, 24 Sep 2014 13:29:34 +0200 Tom Gottfried Make ChartArea and thus annotations sensible for logarithmic axes (plus some minor cleanup).
Wed, 24 Sep 2014 12:16:53 +0200 Sascha L. Teichmann Removed obsolete imports.
Wed, 24 Sep 2014 12:02:37 +0200 Raimund Renkert merged.
Wed, 24 Sep 2014 12:02:05 +0200 Raimund Renkert Updated the client to build a default artifact for sq relations.
Wed, 24 Sep 2014 11:59:49 +0200 Raimund Renkert Configured "static" sq relation to use a default D4EArtifact and two states to hold the parameters and outs.
Wed, 24 Sep 2014 11:56:03 +0200 Raimund Renkert Renamed ui provider for static data panel.
Tue, 23 Sep 2014 16:45:47 +0200 Tom Gottfried Make SQ-relations loadable in WQ-diagrams.
Tue, 23 Sep 2014 15:07:39 +0200 Tom Gottfried Make WQ-data loadable in SQ-diagrams. We still need to handle mainvalues and values <=0 on x-axis.
Tue, 23 Sep 2014 12:56:23 +0200 Tom Gottfried Q-symmetry: SQ-relations should not be filtered for specific outs (and optimised statement a bit).
Tue, 23 Sep 2014 10:11:52 +0200 Tom Gottfried Put all macros for wst-data in one place and reduce code duplications.
Mon, 22 Sep 2014 18:17:47 +0200 Tom Gottfried Remove duplications from discharge prototypes and put it all together.
Mon, 22 Sep 2014 17:11:20 +0200 Raimund Renkert merged.
Mon, 22 Sep 2014 17:10:23 +0200 Raimund Renkert Added injector for PNP.
Mon, 22 Sep 2014 17:08:48 +0200 Raimund Renkert Updated the client to build a default artifact for gauge discharge curve.
Mon, 22 Sep 2014 17:05:37 +0200 Raimund Renkert Configured gauge discharge curve to use a default D4EArtifact and two states to hold the parameters and outs.
Fri, 19 Sep 2014 16:29:11 +0200 Tom Gottfried Classify and sort iteration over user-data non-recommendations.
Fri, 19 Sep 2014 16:07:59 +0200 Tom Gottfried Classify and sort iteration over non-recommendations.
Fri, 19 Sep 2014 15:45:54 +0200 Tom Gottfried Classify and sort iteration over recommendations.
Fri, 19 Sep 2014 15:31:03 +0200 Tom Gottfried Purge clash of out-names, resulting hacks and tests for not existing outs and give some more meaningful names.
Fri, 19 Sep 2014 09:49:09 +0200 Tom Gottfried Official sedimentload epochs should be seperated from other data in datacage.
Thu, 18 Sep 2014 18:41:14 +0200 Tom Gottfried These meta-lines had been invented before.
Thu, 18 Sep 2014 18:16:51 +0200 Tom Gottfried At least since rev eb052d759fcc, there are no bed height epochs anymore.
Wed, 17 Sep 2014 19:46:19 +0200 Tom Gottfried Added tag 3.1.6 for changeset 301a32bd7045
Wed, 17 Sep 2014 19:28:39 +0200 Tom Gottfried Though not yet part of the calculation, suspended load has to be optionally loadable through datacage. 3.1.6
Wed, 17 Sep 2014 17:56:37 +0200 Tom Gottfried Set facet activity for middle bed height.
Wed, 17 Sep 2014 17:35:36 +0200 Tom Gottfried Add theme for porosity and sync second with default.
Wed, 17 Sep 2014 17:13:48 +0200 Tom Gottfried In case the list is not ordered, in the end diagrams might look weird.
Wed, 17 Sep 2014 13:24:13 +0200 Tom Gottfried Consider new SQ-diagrams in datacage config.
Wed, 17 Sep 2014 13:12:12 +0200 Tom Gottfried Essentially backout rev 8ad0b7bc3e73 as this makes some SQ-relation curves appear buckled.
Wed, 17 Sep 2014 13:00:14 +0200 Tom Gottfried Avoid NPE if river is not accessible.
Wed, 17 Sep 2014 12:32:24 +0200 Raimund Renkert merged.
Wed, 17 Sep 2014 12:32:01 +0200 Raimund Renkert Fixed style for sq relation link in measurement station info grid.
Wed, 17 Sep 2014 09:22:50 +0200 Tom Gottfried i18n is meant for translation and unfortunately the client has three files for that.
Wed, 17 Sep 2014 09:04:30 +0200 Raimund Renkert merged.
Wed, 17 Sep 2014 09:03:39 +0200 Raimund Renkert Avoid NPE in discharge context injector if no start km was set.
Wed, 17 Sep 2014 09:02:44 +0200 Raimund Renkert Added themes for new fraction in sq relation.
Wed, 17 Sep 2014 09:01:27 +0200 Raimund Renkert Added new fraction to sq relation.
Tue, 16 Sep 2014 18:48:34 +0200 Tom Gottfried Outs might be set in the client.
Tue, 16 Sep 2014 18:33:46 +0200 Tom Gottfried Crude script to find non-existant outs in meta-data.xml
Tue, 16 Sep 2014 16:10:30 +0200 Tom Gottfried Update comment on conditional loading of user content.
Tue, 16 Sep 2014 14:57:55 +0200 Raimund Renkert merged.
Tue, 16 Sep 2014 14:57:14 +0200 Raimund Renkert The default state is no more abstract.
Tue, 16 Sep 2014 12:12:06 +0200 Tom Gottfried Set facet activity for bed quality.
Tue, 16 Sep 2014 11:33:08 +0200 Tom Gottfried Add metadata to bedheight facets in bed height differences.
Mon, 15 Sep 2014 15:38:16 +0200 Sascha L. Teichmann Adopt configuation of artifacts into new xml documents to make them configurable inline.
Mon, 15 Sep 2014 15:00:48 +0200 Tom Gottfried Purge some duplicated logging an misleading comments.
Mon, 15 Sep 2014 11:58:31 +0200 Tom Gottfried Call orphaned macro originating from 'fix_wq_curve' in prototype.
Mon, 15 Sep 2014 11:26:48 +0200 Tom Gottfried Make use of publicly available external WMS (Pegelonline) otherwise called from BfG-specific macro.
Fri, 12 Sep 2014 19:09:24 +0200 Tom Gottfried Remove call of BfG-specific macro.
Fri, 12 Sep 2014 19:00:45 +0200 Tom Gottfried A bit less chaos in i18n for bed heights.
Fri, 12 Sep 2014 14:56:49 +0200 Raimund Renkert merged.
Fri, 12 Sep 2014 14:56:22 +0200 Raimund Renkert Added themes for SQ relation overview chart.
Fri, 12 Sep 2014 14:55:42 +0200 Raimund Renkert SQ relation overview is now a single chart containing all fractions.
Fri, 12 Sep 2014 13:12:25 +0200 Sascha L. Teichmann Added discharge curve prototye.
Fri, 12 Sep 2014 08:42:41 +0200 Raimund Renkert Fixed location distance panel. TODO: Switch to location table and select tabs.
Fri, 12 Sep 2014 08:39:10 +0200 Raimund Renkert Fixed multi period panel in fix analysis.
Thu, 11 Sep 2014 17:37:03 +0200 Tom Gottfried Making i18n work was just easier using less wrappers in this case (issue1631).
Thu, 11 Sep 2014 16:12:39 +0200 Tom Gottfried Measurement stations without range should not be used in calculation and we assume the beginning of the range is the station.
Thu, 11 Sep 2014 14:45:17 +0200 Tom Gottfried Suspended sand is part of total load.
Thu, 11 Sep 2014 11:23:10 +0200 Raimund Renkert merged.
Thu, 11 Sep 2014 11:22:38 +0200 Raimund Renkert Fixed date range panel in fix analysis.
Wed, 10 Sep 2014 12:45:35 +0200 Sascha L. Teichmann Removed obsolete imports.
Wed, 10 Sep 2014 12:42:39 +0200 Sascha L. Teichmann Made call context injectors a list of comma separated classes.
Wed, 10 Sep 2014 10:02:46 +0200 Raimund Renkert merged.
Wed, 10 Sep 2014 10:01:57 +0200 Raimund Renkert Added injectors to config and moved subtitle conf.
Wed, 10 Sep 2014 10:01:11 +0200 Raimund Renkert Added context injectors for discharge curves.
Tue, 09 Sep 2014 20:08:12 +0200 Tom Gottfried Added tag 3.1.5 for changeset d81c4b0d5ca7
Tue, 09 Sep 2014 19:05:08 +0200 Tom Gottfried Write CSV-header only once. 3.1.5
Tue, 09 Sep 2014 18:41:11 +0200 Tom Gottfried Fix duration curve i18n.
Tue, 09 Sep 2014 17:05:21 +0200 Tom Gottfried Some i18n completion in hist. discharge curves.
Tue, 09 Sep 2014 16:29:53 +0200 Tom Gottfried Enable dynamic zoom-range in subtitle.
Tue, 09 Sep 2014 14:53:12 +0200 Tom Gottfried Patch build from given date not available anymore.
Tue, 09 Sep 2014 13:49:28 +0200 Tom Gottfried We well want to average NaNs but want to know the cause of the result being NaN.
Tue, 09 Sep 2014 12:03:46 +0200 Tom Gottfried Suggestion: sort measurement stations along the river and only along the river.
Tue, 09 Sep 2014 11:13:37 +0200 Andre Heinecke (issue1448) Fix info service for epoch / periods and off epoch
Tue, 09 Sep 2014 10:53:50 +0200 Tom Gottfried Suggestion: Load official epochs via recommendations instead of a pseudo-calculation.
Mon, 08 Sep 2014 19:48:17 +0200 Andre Heinecke (issue1448) Actually filter out not matching sq_time_interval_ids
Mon, 08 Sep 2014 19:47:01 +0200 Andre Heinecke (issue1448) Objectify sq_time_interval id.
Mon, 08 Sep 2014 19:01:26 +0200 Andre Heinecke (issue1448) Finally use the sq time interval as filter in the calculation.
Mon, 08 Sep 2014 19:00:30 +0200 Andre Heinecke (issue1448) Unify SedimentLoadData ctor again
Mon, 08 Sep 2014 18:59:10 +0200 Andre Heinecke (issue1448) Add Sq time interval to sediment load accessor
Mon, 08 Sep 2014 18:31:17 +0200 Andre Heinecke (issue1448) Look through all the data for sq_ti_id in following states.
Mon, 08 Sep 2014 17:52:52 +0200 Andre Heinecke (issue1448) Carry sq_ti_date in artifact description anf fix sqtipanel
Mon, 08 Sep 2014 17:50:10 +0200 Andre Heinecke (issue1448) Use correct data name for ti_id and carry string value of selected date.
Mon, 08 Sep 2014 16:24:50 +0200 Andre Heinecke (issue1448) In a list of one element. Select the only element.
Mon, 08 Sep 2014 16:24:16 +0200 Andre Heinecke (issue1448) Add Panel for new sq_ti_select state
Mon, 08 Sep 2014 16:23:38 +0200 Andre Heinecke (issue1448) Extend SedimentLoadInfo request to handle sq time intervals
Mon, 08 Sep 2014 16:21:26 +0200 Andre Heinecke (issue1448) Extend SL info service to handle sq_time_intervals
Mon, 08 Sep 2014 16:19:15 +0200 Andre Heinecke (issue1448) Fix return values of SQ time interval accessors
Mon, 08 Sep 2014 16:18:37 +0200 Andre Heinecke (issue1448) Add l10n for new sq time interval state.
Mon, 08 Sep 2014 16:17:59 +0200 Andre Heinecke (issue1448) Add SQ Time interval select state
Mon, 08 Sep 2014 16:14:43 +0200 Sascha L. Teichmann Pass request document to the context injectors.
Mon, 08 Sep 2014 16:06:50 +0200 Sascha L. Teichmann Merged.
Mon, 08 Sep 2014 16:06:34 +0200 Sascha L. Teichmann Made it compile with changed ContextInjector interface again.
Mon, 08 Sep 2014 15:54:12 +0200 Tom Gottfried Let official epochs be showy and remove detritus of 'yields' in datacage config.
Mon, 08 Sep 2014 15:48:11 +0200 Sascha L. Teichmann Call context inspector in output helper.
Mon, 08 Sep 2014 13:33:39 +0200 Sascha L. Teichmann Stop stupid propagation of out subtype in generators. What is this? It is not used anyway.
Mon, 08 Sep 2014 13:17:49 +0200 Sascha L. Teichmann Added context injector to generators.
Mon, 08 Sep 2014 12:28:16 +0200 Sascha L. Teichmann Merged
Mon, 08 Sep 2014 12:27:55 +0200 Sascha L. Teichmann Anti programming: Throw CrossSectionApp away. Not useful ATM. The backing data structures are fine now and the original purpose of the app was to figure them out.
Mon, 08 Sep 2014 12:25:47 +0200 Tom Gottfried We only need to know what's going on upstream.
Mon, 08 Sep 2014 12:21:32 +0200 Tom Gottfried Fetch missing values from database and show them in diagrams.
Mon, 08 Sep 2014 10:03:00 +0200 Tom Gottfried Allow fractions without SQ-time interval (suspended sediment) to be loaded.
Fri, 05 Sep 2014 20:57:31 +0200 Tom Gottfried Error reports for sediment load calculation.
Fri, 05 Sep 2014 19:30:50 +0200 Andre Heinecke Do not inherit smartgwt include the javascript directly in FLYS.html superdev

http://dive4elements.wald.intevation.org