| Thu, 28 Apr 2011 11:32:41 +0000 |
Ingo Weinzierl |
Added a further state that is reached if the waterlevel calculation mode has been chosen.
|
| Thu, 28 Apr 2011 11:22:45 +0000 |
Ingo Weinzierl |
Added a new Transition to compare values.
|
| Thu, 28 Apr 2011 11:20:11 +0000 |
Ingo Weinzierl |
Bugfixes: Adapted a broken method call of TransitionEngine.isStateReachable() and added the outputs of a current state to the DESCRIBE.
|
| Thu, 28 Apr 2011 11:16:21 +0000 |
Ingo Weinzierl |
Bugfix: Added the missing init() method to a Transition and call it in the TransitionFactory after a Transition has been created.
|
| Thu, 28 Apr 2011 11:13:06 +0000 |
Ingo Weinzierl |
Bugfix: The outputs of a Collection's attribute document are stored in an outputs node now instead of being stored toplevel in the document.
|
| Thu, 28 Apr 2011 11:08:34 +0000 |
Ingo Weinzierl |
Throw an illegal argument exception in LocationDistanceSelect.validate() and WQSelect.validate() if no data has been inserted so far.
|
| Thu, 28 Apr 2011 09:09:44 +0000 |
Sascha L. Teichmann |
Added XSL transformation do create Graphviz digraph out of conf.xml
|
| Thu, 28 Apr 2011 08:14:20 +0000 |
Ingo Weinzierl |
The OutGenerator gets the theme of a facet while output creation.
|
| Wed, 27 Apr 2011 14:42:52 +0000 |
Ingo Weinzierl |
Removed useless imports.
|
| Wed, 27 Apr 2011 14:40:44 +0000 |
Ingo Weinzierl |
Added an abstract OutGenerator that should be the base class for all generators which create charts.
|
| Wed, 27 Apr 2011 14:35:44 +0000 |
Ingo Weinzierl |
Improved the out() operation of a Collection - the OutGenerator gets to know about the facets and its theme.
|
| Tue, 26 Apr 2011 13:29:18 +0000 |
Ingo Weinzierl |
The Attributes of a collection are written into its DESCRIBE now.
|
| Tue, 26 Apr 2011 13:17:08 +0000 |
Ingo Weinzierl |
Initialized the facet2theme mappings configured in themes.xml and added a function to the ThemeFactory that retrieves a theme from FLYSContext based on its name.
|
| Fri, 22 Apr 2011 15:49:35 +0000 |
Sascha L. Teichmann |
Corrected a silly c&p mistake.
|
| Fri, 22 Apr 2011 09:57:27 +0000 |
Sascha L. Teichmann |
Implementation of the "Ruecksprungkorrektur" to be done in "W fuer angepassten Abflusslaengschnitt".
|
| Thu, 21 Apr 2011 08:49:58 +0000 |
Ingo Weinzierl |
Removed debug code that has been commited by accident.
|
| Thu, 21 Apr 2011 08:47:39 +0000 |
Ingo Weinzierl |
Added a first small theme configuration and code to read it.
|
| Thu, 21 Apr 2011 08:44:41 +0000 |
Ingo Weinzierl |
Implementation of interfaces and its default implementations and a factory to work with themes.
|
| Wed, 20 Apr 2011 14:26:51 +0000 |
Sascha L. Teichmann |
Implementation of "Abflusskurve/Abflusstafel" calculation.
|
| Wed, 20 Apr 2011 13:13:19 +0000 |
Sascha L. Teichmann |
Added dependency to Apache Commons Math 2.2 (Apache License 2.0)
|
| Wed, 20 Apr 2011 09:46:40 +0000 |
Sascha L. Teichmann |
Discharge table: Fix problem when sorting by q (copied w instead of q).
|
| Wed, 20 Apr 2011 08:00:38 +0000 |
Ingo Weinzierl |
Fixed broken HQL statement.
|
| Tue, 19 Apr 2011 17:43:39 +0000 |
Sascha L. Teichmann |
Implemented the "Wasserstand/Wasserspiegellagen" calculation.
|
| Tue, 19 Apr 2011 17:37:21 +0000 |
Sascha L. Teichmann |
Discharge table: we need a getQForW() and not a getWForQ().
|
| Tue, 19 Apr 2011 14:48:28 +0000 |
Sascha L. Teichmann |
Discharge tables: Sorting of q values was done wrong.
|
| Tue, 19 Apr 2011 13:10:27 +0000 |
Ingo Weinzierl |
The list of annotations returned by the AnnotationFactory is ordered by its range.
|
| Tue, 19 Apr 2011 12:33:39 +0000 |
Ingo Weinzierl |
Added a service that returns the MainValues of a Gauge based on a river name and a stationing.
|
| Tue, 19 Apr 2011 12:31:07 +0000 |
Ingo Weinzierl |
Added a factory that returns MainValues.
|
| Tue, 19 Apr 2011 11:05:27 +0000 |
Sascha L. Teichmann |
Discharge table: Added static method getWForQ() to interpolate a w value for a given q value based on a given discharge table.
|
| Tue, 19 Apr 2011 10:32:31 +0000 |
Sascha L. Teichmann |
Discharge tables: Added convenience constructors/methods to ease the access to the master discharge table of a gauge.
|
| Mon, 18 Apr 2011 16:01:23 +0000 |
Sascha L. Teichmann |
Moved the query complexity of creating a w/q value table into view
|
| Mon, 18 Apr 2011 14:40:35 +0000 |
Sascha L. Teichmann |
Fetches w/q value tables from the backend.
|
| Mon, 18 Apr 2011 13:23:12 +0000 |
Ingo Weinzierl |
Changed the error key that is written to the result document of the feed operation.
|
| Mon, 18 Apr 2011 13:21:52 +0000 |
Ingo Weinzierl |
The inserted river is validated in the feed operation().
|
| Mon, 18 Apr 2011 13:00:57 +0000 |
Ingo Weinzierl |
The calculation method is validated in the feed() operation.
|
| Mon, 18 Apr 2011 12:36:08 +0000 |
Ingo Weinzierl |
The inserted ranges (distance and WQ ranges) are validated in the feed() operation.
|
| Mon, 18 Apr 2011 09:34:18 +0000 |
Ingo Weinzierl |
Removed testing code that has been comitted by accident in the last revision.
|
| Mon, 18 Apr 2011 07:39:17 +0000 |
Ingo Weinzierl |
The getGauge() method of the FLYSArtifact returns the first gauge based on the given stationing now.
|
| Fri, 15 Apr 2011 13:47:10 +0000 |
Ingo Weinzierl |
The WQ state fills the DESCRIBE with default values for W and Q.
|
| Fri, 15 Apr 2011 13:46:22 +0000 |
Ingo Weinzierl |
Added a WstFactory to return Wst objects.
|
| Fri, 15 Apr 2011 13:37:51 +0000 |
Ingo Weinzierl |
FLYSArtifact provides methods to retrieve the real River, Gauge objects.
|
| Fri, 15 Apr 2011 10:10:37 +0000 |
Ingo Weinzierl |
Bugfix: repaired broken imports of the session holder.
|
| Fri, 15 Apr 2011 09:52:37 +0000 |
Ingo Weinzierl |
Removed the SessionHolder and adapted imports.
|
| Thu, 14 Apr 2011 13:45:50 +0000 |
Sascha L. Teichmann |
Acquire/release sessions in services to avoid db connection leaks.
|
| Thu, 14 Apr 2011 13:36:06 +0000 |
Ingo Weinzierl |
The location/distance state now writes default values into DESCRIBE.
|
| Thu, 14 Apr 2011 13:26:29 +0000 |
Ingo Weinzierl |
Added a new function to RiverFactory that retrieves a River object based on a given river name.
|
| Thu, 14 Apr 2011 13:15:16 +0000 |
Sascha L. Teichmann |
Backend access: Static methods are using the SessionHolder, too.
|
| Thu, 14 Apr 2011 13:11:12 +0000 |
Ingo Weinzierl |
Finalized the SessionCallContextListener and registered it as CallContext.Listener in the configuration.
|
| Thu, 14 Apr 2011 12:59:21 +0000 |
Ingo Weinzierl |
Bugfix: Call correct method to retrieve and initialize an instance of SessionFactoryProvider.
|
| Thu, 14 Apr 2011 12:08:47 +0000 |
Sascha L. Teichmann |
Added a session holder to hold hibernate sessions.
|
| Thu, 14 Apr 2011 11:18:28 +0000 |
Ingo Weinzierl |
Added an Implementation of CallContext.Listener to open/close Hibernate Sessions for each request.
|
| Thu, 14 Apr 2011 08:32:18 +0000 |
Ingo Weinzierl |
Modified the states' describe() method - related to the last commit.
|
| Thu, 14 Apr 2011 08:23:15 +0000 |
Ingo Weinzierl |
Removed the state to explicitly select a gauge.
|
| Wed, 13 Apr 2011 08:31:20 +0000 |
Ingo Weinzierl |
Bugfix: Repaired the dynamic UI part of the RiverSelect state in DESCRIBE.
|
| Tue, 12 Apr 2011 13:42:14 +0000 |
Ingo Weinzierl |
Write the name of an artifact into the DESCRIBE document.
|
| Tue, 12 Apr 2011 07:49:36 +0000 |
Ingo Weinzierl |
Bugfix: States are filled with data before they describe themself.
|
| Mon, 11 Apr 2011 12:54:03 +0000 |
Ingo Weinzierl |
Implemented a service that retrieves distance information for a specific river.
|
| Wed, 06 Apr 2011 10:01:49 +0000 |
Ingo Weinzierl |
The FLYSArtifactCollection overrides out() and uses OutGenerators to create output for this operation.
|
| Wed, 06 Apr 2011 09:56:38 +0000 |
Ingo Weinzierl |
Added a DischargeCurveGenerator that creates discharge curves.
|
| Wed, 06 Apr 2011 09:53:14 +0000 |
Ingo Weinzierl |
Changed the visibility of getData() method of FLYSArtifacts.
|
| Sun, 03 Apr 2011 10:55:16 +0000 |
Sascha L. Teichmann |
Removed trailing whitespace.
|
| Sun, 03 Apr 2011 10:53:14 +0000 |
Sascha L. Teichmann |
Make project compilable again.
|
| Thu, 31 Mar 2011 10:56:08 +0000 |
Ingo Weinzierl |
Added code to parse the configured OutGenerators in the global configuration and to save a map of such in the FLYSContext.
|
| Thu, 31 Mar 2011 10:54:07 +0000 |
Ingo Weinzierl |
Added an OutGenerator interface that might be used to generator collected outputs of a set of artifacts.
|
| Wed, 30 Mar 2011 16:00:51 +0000 |
Ingo Weinzierl |
Removed the Backend reference from FLYSArtifactCollection.
|
| Wed, 30 Mar 2011 15:21:12 +0000 |
Ingo Weinzierl |
Enhanced the output mode for discharge curves with three facets.
|
| Wed, 30 Mar 2011 13:47:02 +0000 |
Ingo Weinzierl |
Tagged RELEASE 0.1 of FLYS Artifacts.
|
| Tue, 17 May 2011 07:51:26 +0000 |
Ingo Weinzierl |
Tagged RELEASE 2.3 of flys-client.
|
| Mon, 16 May 2011 10:36:48 +0000 |
Hans Plum |
Added missing information for release
|
| Mon, 16 May 2011 10:27:47 +0000 |
Hans Plum |
Added NEWS File for collecting enduser-sepcific information for releases
|
| Fri, 13 May 2011 11:24:55 +0000 |
Ingo Weinzierl |
Prepared Changes for the upcoming release 2.3.
|
| Fri, 13 May 2011 09:06:13 +0000 |
Sascha L. Teichmann |
Datacage: Better converter for incoming XML tree
|
| Thu, 12 May 2011 16:47:23 +0000 |
Raimund Renkert |
ISSUE 61: Changed datacage button style.
|
| Thu, 12 May 2011 15:42:37 +0000 |
Raimund Renkert |
ISSUE 46: Removed the table header context menu.
|
| Thu, 12 May 2011 15:14:09 +0000 |
Raimund Renkert |
ISSUE 43: Changed i18n strings.
|
| Thu, 12 May 2011 14:59:18 +0000 |
Raimund Renkert |
Show rivers as links instead of a combobox.
|
| Thu, 12 May 2011 09:59:29 +0000 |
Ingo Weinzierl |
ISSUE-15 The charts in the chart panel are requested with the size of the parent panel.
|
| Thu, 12 May 2011 09:14:46 +0000 |
Ingo Weinzierl |
Enabled the client to request charts in different sizes.
|
| Thu, 12 May 2011 07:08:27 +0000 |
Ingo Weinzierl |
ISSUE-34 Limit the windows which are moved to the right lower corner to 10.
|
| Wed, 11 May 2011 16:38:54 +0000 |
Sascha L. Teichmann |
Datacage: transport rpc result to ui.
|
| Wed, 11 May 2011 15:33:54 +0000 |
Ingo Weinzierl |
Changed the height of the export panel.
|
| Wed, 11 May 2011 14:34:15 +0000 |
Sascha L. Teichmann |
UI stub for data cage
|
| Wed, 11 May 2011 14:29:35 +0000 |
Ingo Weinzierl |
ISSUE-56 Display download buttons to export the computed data.
|
| Wed, 11 May 2011 14:23:08 +0000 |
Ingo Weinzierl |
Added a service to export data from the artifact server.
|
| Wed, 11 May 2011 11:44:23 +0000 |
Raimund Renkert |
ISSUE 34: Move every new project window 20 px down and right.
|
| Wed, 11 May 2011 11:07:18 +0000 |
Raimund Renkert |
ISSUE 44: Moved the location/range and WQ input tables to the helper panel and
|
| Wed, 11 May 2011 10:04:49 +0000 |
Raimund Renkert |
Set the computation result panel width and height to 100%.
|
| Wed, 11 May 2011 09:11:40 +0000 |
Ingo Weinzierl |
Parse the facets of a Collection and distinguish between an ordinary OutputMode and an ExportMode (new).
|
| Wed, 11 May 2011 07:32:08 +0000 |
Ingo Weinzierl |
ISSUE-41 Moved the panel that shows the computation results right beside the parameterization - NOTE: issue is still open.
|
| Wed, 11 May 2011 07:06:22 +0000 |
Ingo Weinzierl |
ISSUE-57 Replaced wrong i18n function call.
|
| Tue, 10 May 2011 16:49:15 +0000 |
Ingo Weinzierl |
ISSUE-48 Added placeholder for the toolbar and the theme control in the chart output tab.
|
| Tue, 10 May 2011 16:25:00 +0000 |
Ingo Weinzierl |
ISSUE-38 Set the first value of a select box as default value.
|
| Tue, 10 May 2011 16:13:16 +0000 |
Ingo Weinzierl |
Added i18n error messages used in the adapted wq panel.
|
| Tue, 10 May 2011 15:44:43 +0000 |
Raimund Renkert |
Changed the empty table message for the WQ input table.
|
| Tue, 10 May 2011 15:36:07 +0000 |
Raimund Renkert |
Changed the empty table message for helper and data tables.
|
| Tue, 10 May 2011 13:44:57 +0000 |
Sascha L. Teichmann |
Added stub for meta data service.
|
| Tue, 10 May 2011 11:37:49 +0000 |
Raimund Renkert |
Fixed the location input. A range selection sets the correct location values
|
| Tue, 10 May 2011 10:57:57 +0000 |
Raimund Renkert |
Remove the data table on step back.
|
| Tue, 10 May 2011 10:03:00 +0000 |
Raimund Renkert |
Build a dynamic table for the CSV data.
|
| Tue, 10 May 2011 06:48:46 +0000 |
Ingo Weinzierl |
Fixed attributes/namespaces in the XML document that is used to fetch the CSV export of WINFO computations.
|
| Mon, 09 May 2011 16:22:11 +0000 |
Ingo Weinzierl |
Fixed a broken dependency in the maven pom file.
|
| Mon, 09 May 2011 14:29:53 +0000 |
Raimund Renkert |
Added table and service for calculation output to UI.
|
| Mon, 09 May 2011 13:51:39 +0000 |
Ingo Weinzierl |
Added radio buttons to choose between W/Q modes in the adapted WQ panel.
|
| Mon, 09 May 2011 11:21:50 +0000 |
Ingo Weinzierl |
Bugfix: the current locale string is used to fetch chart images now.
|
| Mon, 09 May 2011 10:31:54 +0000 |
Ingo Weinzierl |
Added a doubleclick listener to the project list to open a project.
|
| Mon, 09 May 2011 10:23:20 +0000 |
Sascha L. Teichmann |
Removed superfluous imports.
|
| Mon, 09 May 2011 10:20:45 +0000 |
Ingo Weinzierl |
Changed the wording when speaking about kilometer ranges.
|
| Thu, 05 May 2011 15:42:38 +0000 |
Raimund Renkert |
Enable or disable table rows depending on the WQ selection.
|
| Thu, 05 May 2011 13:32:36 +0000 |
Raimund Renkert |
Implemented handler for WQ value selection.
|
| Thu, 05 May 2011 09:51:51 +0000 |
Raimund Renkert |
Added table for WQ inputs.
|
| Thu, 05 May 2011 09:33:15 +0000 |
Ingo Weinzierl |
Implemented the createOld() of WQAdaptedInputPanel.
|
| Thu, 05 May 2011 08:09:03 +0000 |
Ingo Weinzierl |
The WQAdaptedInputPanel displays input fields for each gauge and returns the correct w/q values now.
|
| Wed, 04 May 2011 14:54:38 +0000 |
Raimund Renkert |
Added new WQ info service and data structures.
|
| Wed, 04 May 2011 14:40:50 +0000 |
Raimund Renkert |
Do not update the locations table if no data is cached.
|
| Wed, 04 May 2011 14:05:40 +0000 |
Ingo Weinzierl |
Added a stub implementation of a WQ panel for discharge longitudinal section computations.
|
| Wed, 04 May 2011 13:02:00 +0000 |
Raimund Renkert |
Fixed the single location input panel.
|
| Wed, 04 May 2011 08:41:55 +0000 |
Ingo Weinzierl |
Renamed non-computed discharge curve outputs.
|
| Wed, 04 May 2011 07:36:20 +0000 |
Ingo Weinzierl |
Added i18n strings for the computed discharge curve.
|
| Tue, 03 May 2011 16:22:27 +0000 |
Ingo Weinzierl |
Added new i18n strings for new output modes.
|
| Tue, 03 May 2011 13:52:14 +0000 |
Raimund Renkert |
Added new UI provider for single location selection.
|
